PENTAX IQZoom 700, 700 DATE camera OPERATING MANUAL

 PENTAX
Ï QZoon7 Ou OPERATING MANUAL
JO Zoom 7 Oh:
PENTAX
nT
oe), PRE
y. ML
ad
EN
NY |
aya
ig
>
Omm TES
Welcome to the world of Pentax zoom compact photo-
graphy! Your compact, lightweight camera is a great com-
panion to preserve your favorite memories.
Its built-in 35 — 70 mm zoom lens gives you the
freedom to frame everything from breathtaking land-
scapes to family portraits, even detailed close-ups. Built-in
auto flash helps you capture a subject in a dimly-lit night
Or an indoor scene with clarity and brilliance, and func-
tions as a fill-in flash for daylight flash-sync photography.
Since most of the operations — including film loading, film
speed setting, winding rewinding, focus and exposure
control — are automatic, you can take great pictures with
litle effort. The DATE model makes it easy to remember
when you take pictures.
Please read this manual carefully before operating the
camera to learn how to take consistently flawless pictures.
Names of the camera's working parts are listed on the
front and back flaps of this manual. Keep the flaps
unfolded for quick reference while you read.
PENTAX
10Zoon
© Built-in flash
Q Viewtinder window
© Autofocus window
© Main switch
O Shutter release button
6 Macro button
6) Self-timer lamp -
O Battery chamber cover fixing screw
© Light-sensor window
€ Zoom lens
® Grip
66000
«a =
E ig Le E BE See RA a LEAN rd BR OR Hed 5 я = a 222 = A SE Ó e, : Гы + AREA ta a Gi : AR ee
OUTLINE.OF BASIC OPERATION E
a a a 34 o. A AA e OE NT AE aio E lA A i
Open the back cover Load the film and ctose the The film automatically Set the main switch to ( $ )
[see page 7). back cover. advances to the first frame. {see page 3).
Mm
An
E
НЫ с)
Frame your subject and Focus your subject Press the shutter release When the film reaches is
operate the zooming lever 10 (see page 12). button. In dark conditions, end, the camera automati-
determine the composition the flash fires automatically. — cally rewinds the film
(see page 5). (see page 16).
TABLE OF CONTENTS
e Names of working parts .......................—.. Flaps
e Quiline of basic operations ................ Inside cover
PRESHOOTING PREPARATIONS
1. Strap and soft case ................e.eeeesesrnoo ...
2. Main switch and battery check .....................
3. Howto hold the camera ...................eee.e....
4. Operating 35 — 70 mm zoomiens .................
BASIC OPERATIONS
. Usable film oo. nec e 0e
. Film loading o.oo caen ace sa ana een
. Viewfinder displays and shooting ranges ...........
Green/red lamps ............0000000cee sance ce se can»
Ordinary photography ......0.00000047400 rer
Taking pictures ................e-er.emerieverreerve.
. Focus-lock shooting .............................
Unloading film ........ooiiiiii eH RA EEE
о чо лом =
OPERATIONS OF MAJOR FUNCTIONS
Taking macro pictures...
How to select modes ..............e_.—.._eevreeververenea
Flash-On (forced emission) ...........................
Flash-Off (flash override) ................e_ee.........
Exposure Compensation .................ee....es....
Bulb and Bulb-Synchro ..............eeeneeeeerrerre
Consecutive Shooting ................e_er.eeesereeees
Self-Timer eee
Dual-Frame Self-Timer .................—.—eomvececemr
Multi-Exposure ..............00000001sa nana cena neue»
Combination chart of exposure and shooting systems .
® DATE model ..............000000see ana rca n can ace une 0
e Battery exhaustion warning 0... 4
e Replacing batteries ......... nn
e Taking care of your camera ............._....—eemee—.-
e Troubleshooting ............e.eee.e.eorererecerneees
e Warranty policy ...............e.eeece-resneeccereces
e Specifications .............e..e.eeesserreirereces
Soft case (optional) Strap
When putting the camera into Fit the strap on the camera as illustrated.
the soft case, be sure to turn Use the clamp's protrusion @ as a screwdriver to open
the main switch off (© ). the battery chamber cover.
On the DATE model, use protrusion @ to press the
SELECT and ADJUST buttons.
2. MAIN SWITCH AND BATTERY CHECK
Main switch
On ( | ): The power is on, and the camera is ready for
setting and shooting.
Off { O ) : The power is off, and the camera is not in use.
Caution:
The lens protector automatically opens when the main
switch is on ( | ), and closes when the main switch is off
( © ). Never attempt to open the lens protector by hand.
Battery check
After you turn the main switch on ( | ), the lens slightly
extends and the lens protector opens. Then you can
shoot.
Notes:
e If you have a DATE model, do not remove the batteries
until they are exhausted, since they are used to keep
constant track of time for the date function.
Refer to page 34 for directions on battery insertion,
3. HOW TO HOLD THE CAMERA
N
»
+
=
я
a
When shooting, hold the camera securely with both
hands. Keep the camera as still as possible, and gently
press the shutter release button. [If pressed forcefully, the
camera is likely to shake, and the picture will be blurred.)
Try to brace your elbows against your body, or support
yourself and the camera against a stable, stationary
object, such as a wall.
When using flash with the camera vertically positioned,
hold the camera so that the flash is above the iens.
Caution:
Do not hold the zoom lens because it moves back and
forth when zooming.
Note:
e Do not place your fingers or hair on the lens, autofocus
window, sensor window, flash, etc.
70 mm
65 т
60 тт
55 mm 50 mm 46 mm 42 mm
38 mm
; 35 mm
When you press the zooming lever to the right ( $ ), the lens frames the
subject more tightly, moving towards the 70 mm telephoto setting. When
you press the zooming lever to the left { 448 ), the lens moves towards
the wider-angle 35 mm setting.
Frame your subject. Release the zooming lever when you attain the
desired composition. Then, press the shutter release button.
Notes:
e As you press the zooming lever, the lens focal length is displayed on
the LCD panel. (The shutter is not released when zooming.)
e The zoom lens has two operational speeds. it moves slowly when the
zooming lever is pressed lightly, and moves quickly when the lever is
pressed further.
e When the camera is left for more than 3 minutes with the main switch
on { | }, the lens automatically returns to the 35 mm (wide-angle)
position.
®
After reading this instruction manual to familiarize yourself
with operations, you're ready to insert the film.
1. USABLE FILM
OX FILM Perforations Film cartridge
Film speed (ISO rating}
Automatic film speed setting
This camera is designed to use DX-coded films with ISO
ratings from 50 to 1600. When such film is loaded, its film
speed is automatically set in the camera.
Notes:
e When buying DX fiim, make sure the package bears the
"DX" mark.
® If non-DX film is loaded, the film speed will be automati-
cally set to ISO 100, regardless of the film's actual
speed.
® Use high-speed film with an ISO rating of 1000 or 1600
mainly for shooting indoors or in dimly-lit conditions.
2. FILM LOADING First, switch off power by setting the main switch to ( O).
Ei
—
KA Slide the back cover release lever in the direction of HA Piace the film cartridge in the film chamber, fitting its
the arrow as illustrated to open the back cover. flat side on the top of the rewind shaft.
Slack NO! ><
Pull the film leader out far enough from the cartridge to
reach the take-up spool @. Align the tip with the film
leader end mark @.
Notes:
® Маке sure the film perforations properly engage the
sprocket teeth @.
* Make sure the film is properly placed between the guide
rails @.
e Make sure the film 1s taut as illustrated. Take up any
stack in the film by pushing it back into the cartridge.
® if the end of the film leader is extremely bent, straighten
it or cut off the bent portion.
EX
El Close the back cover. The film automatically advances
to the first frame. (Even if no film is loaded, the motor
operates for a second or two after the back cover is
closed.)
When "1" appears in the exposure counter on the LCD
panel, the film automatically stops winding. The indica-
tion as shown above appears.
Notes:
e If "1" does not appear on the LCD panet, the film is not
properly loaded. Reload the film.
e After the shutter is released for each exposure, the film
automatically advances to the next frame, unless the
camera is in Multi-Exposure mode.
© Autofocus frame
Position this frame at the subject of focus.
© Picture-area frame
This is the ordinary picture area. Compose the picture
within this frame.
© Parallax-correction frame
When taking a macro picture in which the subject 1s
about 0.6 meters (2 ft) away, or an ordinary shot in
which the subject is about one meter (3.3 ft) away.
compose the picture within this frame.
4 <= Part of the lens front appears in the viewfinder when the
lens is in its wide-angle position, but this won! appear on
the film when the picture is taken.
(0% (3
No onan shooting Shooting ranges
- (effective camera-to-subject distance)
e The ordinary setting allows a shooting range from x
(infinity) to one meter (3.3 ft).
® The macro setting allows a shooting range from one
meter (3.3 ft) to 0.6 meters (2 ft). No subject closer than
0.6 meters can be clearly photographed.
Macro shooting
T y
4. GREEN/RED LAMPS
”—
Sa
When you press the shutter release button half-way, the
lamps @ and/or @ as shown above glow or flicker.
© Green lamp: When it glows you can take & picture.
When it flickers, you cannot.
© Red lamp: When it glows, flash is ready to fire. When it
flickers, flash is being charged.
Note:
® If the green lamp fiickers in the ordinary or macro set-
tings, the subject is either too close or too far. Adjust the
camera-to-subject distance so that the green lamp
glows. then release the shutter.
5. ORDINARY PHOTOGRAPHY
When the LCD panel is as shown above, the camera is in
the Auto and Single-Frame Shooting modes. These
modes are used for ordinary picture-taking situations.
the LCD panel displays indications other than those
above, press the mode/drive clear { C ) button to reset the
LCD panel to appear as above.
6. TAKING PICTURES
MM After zooming and composing your shot, position the
autofocus frame (3) on the subject.
Press the shutter release button half-way with your
subject in focus, and the green lamp glows.
If the subject is closer than one meter (3.3 ft), the green
lamp flickers and the shutter cannot be released. In
this case, lengthen the camera-to-subject distance.
Note:
® If you wish to shift subject focus, release your finger
from the shutter release button and press the shutter
release button half-way again.
* When taking pictures in the dark, the flash auto-
matically fires.
When the shutter release button is lightly pressed in
dark lighting, the red lamp glows, indicating that flash is
ready to fire. À flickering red lamp means the flash is
being charged.
Therefore, make sure the red lamp glows before
shooting.
Flash-effective ranges (Nega-color film used)
Press the shutter release button all the way down, and
the shutter is released.
Then, the film automatically advances to the next
frame.
Notes:
® When the shutter is released, the self-timer lamp glows
momentarily to indicate that a shot has been taken.
e When the green tamp flickers, the ( 63) macro mark on
the LCD panel also flickers to recommend use of macro
mode.
e The shutter cannot be released while the lens is
zooming.
Lens ISO 50 100 400 1600
З5тгт ($$ &)|1 — 3.5 т | 1 — 5 т |1 — 10 т 1 — 18 т*
70mm{ 4 }|1 — 2.5 т |1 — 3.5 т | 1 — 7 т |1 — 12
Macro{ @ )|0.6 — 1 т [0.6 — 1 т [0:6 — 1 | —
* Because of high film speed, overexposure may occur at
close range.
Red eye
Shooting portraits with the flash may result in “red-eye, the
red spots in your subject's eye. Refer to page 39 for the
details.
7. FOCUS-LOCK SHOOTING
NO!
If you shoot without positioning the autofocus frame (5)
On the main subject of the picture as shown above, only
the background will be in focus. When the main subject of
your picture is off the autofocus frame in the center of the
viewfinder, use the focus-lock technique.
Æ When taking a picture of two people, for example, first
position the autofocus frame (3) on one of the two.
ES As you press the shutter release button half-way, the
green lamp on the lefthand side of the viewfinder eye-
piece glows, and focus and exposure are temporarily
locked.
While pressing the shutter release button half-way, re-
aim the camera or recompose the picture, then release
the shutter.
Notes:
e You can cancel focus lock simply by taking your finger
off the shutter release button.
e When in the Consecutive Shooting mode (1,), focus
lock cannot be used.
Hard-to-autofocus subjects
Like many other autofocus cameras, this camera's
autofocus system is highly precise, but is not almighty,
so it may not focus as you wish on certain subjects. In
such cases, use the focus-lock technique on a subject
which is both near the actual one and equidistant from .
the lens.
Subjects which are hard to autofocus include:
1. Black objects like hair, which don't reflect much
light (and therefore don't reflect infrared autofocus
beams).
2. Wire netting, latticework, iron exercise-bars, etc.
3. Flickering light sources such as neon signs, fluo-
rescent lamps, TV images, sunlight coming through
trees, etc., and subjects illuminated by these light
sources.
4. Giossy and reflective surfaces like glass, mirrors,
car bodies, etc.
5. Fast-moving objects, like trains in motion.
6. Water jets, water surface, smoke, flame, fireworks.
etc., which are formless.
8. UNLOADING FILM
(Be sure to remove the film from the camera in the shade.)
e (MI
I) |1
“ry
—
KE After you have exposed the last frame of the roll, film El Open the back cover, and remove the cartridge from
rewinds automatically. Then. the motor stops, and the chamber by pulling on its top with your fingertip as
( DO ) flickers as shown to indicate end of rewind. shown.
Notes:
® During rewinding, the exposure counter counts frame
numbers in reverse.
e A 24-exposure film roll takes about 20 seconds to be
rewound.
e The entire roll of film including the film leader is always
rewound into the cartridge to avoid leakage of light onto
any part of the fiim.
Rewinding the film in midroll
If you wish to unload the film before exposing all the
frames, push the auxiliary rewind button with the protru-
sion € of the strap’s clamp; film rewinding starts. When
rewind is completed, the motor stops, and { ND ) flickers.
Caution:
Never open the back cover until rewinding is completed.
This shooting mode 1s used to take close-up pictures.
When ihe macro symbol (&3} appears on the LCD panel.
you can take macro pictures. When shooting a subject
about 0.6 meters (2 ft) away, compose the shot within the
parallax-correction frame.
! ©
Bex W
(Effective Range: 0.6 — one meter/2 — 3.3 ft.)
KR Press the macro button ( 63) to engage the Macro
mode, and the lens moves forward. To cancel the
Macro mode, just move the zooming lever to the left
( 664 }or right { $ }. The ordinary shooting mode is
then restored.
Notes:
e When the autofocus frame (©) is off-center of the pic-
ture area in macro or close-range photography, use the
techniques described in “Focus-lock shooting” on p. 14.
e The green lamp just glows when the camera-to-subject
distance is extremely short (about 30 cm).
TC TO
-
—
ES The macro shooting range is 0.6 — one meter (2 —
3.3 ff). Press the shutter release button half-way, make
sure the green lamp glows, then release the shutter. №
the camera-to-subject distance is more than one meter
(3.3 ft), and the camera is in macro mode, the green
lamp will flicker, and the shutter cannot be released. By
taking your finger off the shutter release button, the
macro mode is cancelled, and the ordinary shooting
mode is restored. Now a distant subject {one meter/3.3
ft — infinity away) can be shot.
HOW TO SELECT MODES
To select various exposure m des, press the MODE button @
A
y Exposure
Auto Shooting Flash-On Flash-Off Compensation Bulb Bulb-Synchro
—[ + |—[Q |— [9 |—[ B |—| $ В
Press buttons @ and/or @ in succession to set the required modes.
Normally, use the Auto and Single-Frame Shooting modes. To immedi-
ately restore these modes. press the clear { C ) button ©
O
To select various drive modes, press the DRIVE button €.
Single-Frame Consecutive Self-Timer Dual-Frame Self-Timer Multi-Exposure
Shooting Shooting
< <
FLASH-ON (FORCED EMISSION)
HE)
In this mode, the flash will
MODE always fire whether ihe sub-
jects are in a bright or dark
»-C Op environment. Use this mode
for Daylight-Synchro and
Slow-Speed Synchro shooting.
Daylight-Synchro Shooting
In portrait photography, the subject is often darkened in
the picture because the exposure is automatically set for a
bright background. This happens when the subject 15
backlit, when there is a window behind the subject, and
when the subject is shadowed by trees, etc. In such
cases, use the Daylight-Synchro Shooting mode within
the appropriate flash-effective range so that the subject
and background are shot in beautifully balanced lighting.
Slow-Speed Synchro Shooting
As shown in the photograph at left, it's possible to expose
both subject and background in a well-balanced way.
Shutter speed gets slower up 10 1/5 sec. to capture the
background and flash fires for the main subject. Use a
tripod in this mode to avoid camera shake.
Note:
e Make sure you're within the flash-effective distance
range and that the flash (red) lamp glows before
shooting.
@
FLASH-OFF (FLASH OVERRIDE) L_—(3]-[01-[8]-[(8)—[5s]
In this mode, the flash does not
fire, and a picture is taken at a
slower shutter speed. Use this
In situations when flash photo-
graphy 1s prohibited, such as
In theaters, museums, etc.
Furthermore, this mode is also
useful when you wish to take a soft-lighted picture with
natural atmosphere.
Notes:
e When shooting in darkness, another indicator helps
avoid underexposure. Press the shutter release button
half-way; the Flash-On mode mark ( $ ) on the LCD
panel ftickers to recommend use of the flash.
* When shooting in darkness, the shutter speed gets
slower, and camera shake is more likely to blur your
Shot, so use a tripod.
EXPOSURE COMPENSATION
DH)
Portraits with a window, blue
=
sky, or other bright background
~
MODE often result in underexposure
because the exposure is auto-
®t
O matically set for the back-
] ground. Exposure Compensa-
tion makes good use of natural
lighting to improve the balance of light between the sub-
ject and the rest of the picture. Also use this mode to
shoot scenery.
Notes:
e When using Exposure Compensation in a dimly-lit
place, the shutter speed may be so slow that you should
use a tripod to prevent camera shake.
e When shooting in darkness, a photograph will be under-
exposed. In such cases, press the shutter release but-
ton half-way; the Flash-On mode mark ( § ) on the LCD
panel flickers to recommend use of flash.
USING BULB AND BULB-SYNCHRO — [ ]-[3]-[0]-[mM]-[8]J—[s8]
Bulb mode ( B )
=| This mode is useful for long
; Ze | В ^\ exposures required for shoot-
TELL © ‘ ing such things as fireworks
arts e. y | Е >-c MI and night scenes. The shutter
vu a - EE ° o = remains open as long as
& Nag the shutter release button is
held down (but within the
range of 0.5 — 8 sec). When using this mode, the camera
should be mounted on a tripod.
Bulb-Synchro mode ( 4 B )
This lets you use the flash in
addition to the Bulb mode, so
you can take a portrait with a
night scene in the background,
for example.
e The shutter stays open for a maximum of 8 seconds,
even If you continue to press the shutter release button.
® The Self-Timer { $) ) or Dual-Frame Self-Timer ( UN))
cannot be used in combination with the Bulb or Bulb-
Synchro mode.
Bulb-Synchro mode, approx. 2 sec. (1ISO100).
CONSECUTIVE SHOOTING
In this mode, keep pressing
the shutter release button for
consecutive shooting. Moving
subjects such as a running
person, etc., can be shot. The
camera focuses on the subject
frame by frame in this mode,
so make sure to keep the
autofocus frame (CS) on the
subject.
Note:
When using the flash in this mode, consecutive shoot-
ing is possible only after the flash is charged {the red
lamp glows) following each exposure.
SELF-TIMER
Use the Self-Timer when you
wish to get yourself into the
picture. Use of a tripod is
recommended.
a(S) [9] [we]
Focus on the subject first, and then depress the shutter
release button. The shutter will be released in about 10
seconds.
When the Self-Timer is working, the Self-Timer mark
{ ©) flickers on the LCD panel, and the Self-Timer
lamp glows. The lamp starts blinking 3 seconds before
the shutter is released.
DUAL-FRAME SELF-TIMER
In this mode, you can take two
| self-timer pictures in quick
succession.
> -C lose Press the shutter release but-
ton. The first frame will be
exposed after approx. 10
seconds, then the second
frame will be exposed approx. 5 seconds after the first.
Note that focus for both shots is fixed in the first frame.
Cy
DJ E— Me]
Notes on Self-Timer and Dual-Frame Self-Timer:
e To cancel the self-timer after it has been started, press
the drive or mode button.
e To restore the Normal Auto and Single-Frame Shooting
modes, press the clear button ( C ). This will also can-
cel the Self-Timer.
e When using flash with the Self-Timer or Dual-Frame
Self-Timer mode, make sure the flash is charged (the
red lamp glows) before operating either timer feature.
When the battery mark (7) appears on the LCD
panel, the camera may not operate. Replace the
batteries (see page 34).
e Neither the Self-Timer nor Dual-Frame Self-Timer can
be used with the Bulb or Bulb-Synchro mode.
MULTI-EXPOSURE
This mode allows you to multi-
expose on the same frame.
[O—(]—9]—{35 ]— [WE]
—
. Activate the Multi-Exposure mark [ ME ) on the LCD
panel.
2. Press the shutter release button to shoot an initial expo-
sure. The film will not advance, and the normal Single-
Frame Exposure mode will be restored.
3. Recompose the frame, and press the shutter release
button to shoot the second exposure. (After the second
shot, the film will automatically advance to the next
frame)
To expose more than twice:
Activate the Multi-Exposure mark before pressing the
shutter release button for the second exposure. After the
last exposure, the film will wind to the next frame.
Notes:
e If you have a DATE model, the time and date data will
also be multi-exposed, so set the data mode to no data
(------ } after the first shot.
® Repeated multiple exposures tend to overexpose a
frame, so it's recommended that you expose a frame
just twice or so at most.
® When using Multi-Exposure, you can usually get best
results with dimly-lit backgrounds, such as those in
night scenes.
COMBINATION CHART OF EXPOSURE AND SHOOTING SYSTEMS
EXPOSURE SYSTEM
A B | $ В)
О | ©
О | ©
(Auto) | 5
(Single-
Frame)
— На LCD Panel*
zmdo<n 9Z-40010
©
ОО ОО | ©
ОО ООО
OJO O OJO | 9%
О ООО |
|
|
O O @ : Shutter release button
When it goes out, the shutter cannot be released.
ME : Zooming lever
When it goes out, zooming cannot be performed.
©: Normal
O: Combination possible NAM En Ain si
—: Combination impossible * All indications actuaily will not appear simultaneously as
As shown in the table above, exposure and shooting shown.
settings can be used in various combinations.
DATE MODEL
H you purchased the DATE mode, read this section.
>
¡[uo
| ; 4 o
— —
as
NC
MODE button
SELECT button
ADJUST button
The DATE model records dates up to the year 2019 on pictures.
SETTING DATA
| Year-Month-Day | —— Day-Hour-Minute |
Day-Month-Year | +— Month-Day-Year |
Switching the mode
Each time you press the MODE button @ with your fin-
gernail. the mode in the LCD panel switches in succes-
sion from “Year-Month-Day” to “Day-Hour-Minute" to
Dre "10 "Month-Day-Year to “Day-Month-Year”. Stop
pressing the button when the desired mode appears in the
panel. “------ "indicates no data are imprinted,
Notes:
® "M" on the LCD panel indicates "Month".
e Use the strap clamp's pin-shaped protrusion to press
the SELECT @ and ADJUST @ buttons.
Correcting the data
e Each time you press the SELECT button @, a different
category of digits in the LCD display flickers. Press the
SELECT button @ until you reach the flickering digit(s)
which you wish to change. The digit{s} will move in the
following order as you press the SELECT button @.
Date: Year — Month — Day
Time: Hour — Minute — (Second)
e Press the ADJUST button @ to change digits of the
specified category you chose with the SELECT button
©. Digits increase by one each time you press the
ADJUST button @. If you keep it depressed, the digit
will advance continuously after a second or two.
e Date and time are indicated as follows:
Year = 87 — 19 (1987 — 2019)
Month = 1 — 12
Day = 1 — 31
Hour = 0 — 23
Minute = 00 — 59
Adjusting ‘‘Year-Month-Day"
1. Make the digit(s) to be changed corresponding to day.
month, or year flicker by pressing the SELECT button
2. Press the ADJUST button @ to adjust the diait(s).
3. Press the SELECT button @ again to set the digit(s)
you've changed and stop the flickering.
Adjusting “Hour-Minute-: (Second)
1. Make the digit(s) to be changed corresponding to hour
or minute flicker by pressing the SELECT button @.
The flickering :” allows precise fine- tuning of the inter-
nal clock to the beginning of a specified minute.
2. Press the ADJUST button € to adjust the digit(s}.
. To adjust the time to the beginning of a minute, press
the ADJUST button Q in sync with a time-signa! while
"7" is flickering. *:” will stop flickering for an instant, and
the minute will be set to its beginning.
. Press the SELECT button @ again to set the digits
you've changed and stop the flickering.
CG
{+
OPERATIONAL PRECAUTIONS
When shooting
e The data (Year-Month-Day or Day-Hour-Minute) is
recorded on film as in the picture on the right. The data
on the LCD panel is imprinted on each frame you
expose.
e If the corner of the picture where the data is imprinted
has a white or yellow object, the data will be difficult to
see. When composing, try to avoid a brightty-colored
subject in that corner.
o “Year-Month-Day” and "Day-Hour-Minute” cannot both
be imprinted at the same time.
® As you release the shutter, the bar mark { = } on the
LCD panel flickers for a few seconds, indicating the data
has been imprinted.
Power source of the data-imprinting section
The data imprinting section is powered by the batteries in
the cameras main unit. When the batteries are replaced,
the date and time may change. So, after replacing
the batteries, make sure to confirm the date and time
before use.
BATTERY EXHAUSTION WARNING
ac
=f EN
|
When the batteries are nearly exhausted, the battery mark
(CC) appears on the LCD panel to warn you. Replace
the batteries as soon as possible. When (—-) starts
flickering, no operations can be performed.
The battery mark (C—]) appears during operation of the
shutter release button or zooming lever.
Notes on replacing the batteries:
e Make sure there is no film loaded. Switch off power by
setting the main switch to ( O) before replacing the
batteries.
| Els
SC e
IRT | DT
| wl. |»C
| PC « J
123 mm
| mn
e |f the batteries are replaced with film already loaded, the
camera enters the starting mode. it will assume the film
has been just loaded and will advance several frames.
(When the loaded film is near its end, ( E ) or ( -- )
might appesr on the exposure counter of the LCD
panel. In such cases, press the auxiliary rewind button
to activate rewinding.)
e Batteries power both the camera's main unit and the
data-imprinting section. After replacement, confirm that
the data on the LCD panel is correct.
Refer to page 31 for data correction.
Refer to page 34 for battery replacement.
REPLACING BATTERIES
Use two 3 V lithium batteries (CR-123A or DL-123A)
В Using the screwdriver on the strap's clamp, rotate the
screw on the battery chamber cover counterclockwise
to open the cover.
Align the batteries with the ( + ) and { - } indications
and insert two lithium batteries.
Caution:
Replace all batteries at the same time. Do not mix battery
brands. types or old battery with new one !t may cause
explosion or over heating.
Hl As illustrated, slide the battery chamber cover in the
direction of the arrow while pressing down to close.
Rotate the screw clockwise to fasten it securely. [When
the battery chamber cover is reinstalled, the zoom lens
and motor operate for a few moments.)
Note:
® When the batteries are incorrectly installed, { £7 } wil
flicker on the LCD panel to warn you. Insert the batteries
correctly.
PRECAUTIONS ON BATTERIES
e Use lithium CR-123A or DL-123A batteries.
e Keep the batteries out of the reach of children.
® The misuse of batteries causes hazards such as leak-
age, heating, explosions, etc. Batteries should be
inserted with the ( +) or ( - } sides facing the correct
direction.
e To prevent explosion, never try to break up or recharge
the batteries, or throw exhausted ones into fire.
e Battery performance may temporarily decrease in low
temperatures, but it will recover in normal temperature.
e Keep spare batteries on hand for convenience when
shooting outdoors or while traveling.
e When the camera is in a bag, make sure the main
switch is off; otherwise, battery power may be wasted
with the accidental push of the shutter release button.
LCD (Liquid-crystal display)
e When the LCD is exposed to a high temperature of
about 60°C, it may blacken, but when the temperature
falls, it will return to normal.
e The LCD may also slow down in response to lower
temperatures, but this is an LCD characteristic, not a
defect.
Battery life (with 24-exposure film)
Normal photography Approx. 125 rolls
When normal photography
and flash photography are
alternately performed
Approx. 30 rolls
(CR-123A battery used; based on our own test conditions)
TAKING CARE OF YOUR CAMERA, 1:
Your Pentax camera is a sophisticated, precision instrument built to give long-lasting, reliable service. It will serve you well
if you handle and care for it properly.
Major causes of damage are:
1. Dropping or banging the camera, which can damage it
IN many ways.
2. Water damage, particularly if the camera is submerged
In salt water. Your camera 15 not water-proof! It must be
protected from salty breezes or sprays at the beach.
splashing of any kind, and rain. If your camera gets wet,
wipe it dry immediately and have it examined at a Pen-
tax service center.
3. Dirt and sand can cause serious damage to the shutter
mechanism and other moving parts of the camera. Your
camera needs periodic cleaning to keep it operating
properly. Remove dirt and dust with lens-cleaning fluid.
lens-cleaning tissues. etc. Never use solvents such as
thinner or alcohol.
4. Avoid extremes of humidity and temperature. Keep your
camera out of direct sunlight, car trunks, and glove
compartments. Shooting outdoors in winter presents a
problem since batteries won't function if they get too
cold. In cold weather, carry your camera under your
coat or jacket to keep the batteries warm. The tempera-
tures at which this camera should function properly are
approx. 50° — -10°C. Sudden changes in temperature
will often cause condensation of moisture inside or on
the outside of your camera. This might cause extremely
damaging rusting of mechanisms. Furthermore,
transferring the camera from a relatively warm to sub-
freezing temperatures creates damaging ice or frost.
Thus, sudden temperature changes should be avoided
as much as possible. As a guide, a temperature change
of 10°C should occur gradually over at least 30 min-
utes. W this is not possible, keeping the camera in its
case or bag will help minimize the effects of a rapid
temperature change.
»
>
o
. Vibration from traveling in a car, plane, or ship can
cause screws 10 loosen. To minimize this problem, line
the bottom of your camera bag with inch-thick {2.54 cm)
foam-rubber padding.
. When mounting your camera on a tripod, make sure
the tripod screw is no longer than 5.5 mm (0.22 in.),
which is the depth of your camera's tripod socket. A
longer screw might puncture the tripod socket, and
damage the camera.
Do not place the camera with the zoom lens down with-
out turning the main switch off; otherwise, the zooming
mechanism may be seriously damaged.
The electric circuit inside this camera contains high
voltage working parts. NEVER ATTEMPT TO
DISASSEMBLE.
TROUBLESHOOTING
What appears troublesome might be easily remedied.
Here are some problems and their remedies.
1. The shutter cannot be released.
e Is the main switch turned off ( Q)? If so, turn iton ( y).
(See page 3.)
e Are the batteries exhausted or are they loaded?
Replace them or insert new batteries. (See page 34.)
e Is your subject out of the focusing range? Shoot in the
range of one meter to infinity for ordinary photography
and 0.6 to 1 meter for macro photography. (See pages
10, 12 and 18.)
® Are you operating the zooming lever? If so, release your
fingers from the zooming lever, then shoot. (See page
13)
® 15 { 20 ) flickering on the LCD panel? If so, the film is
finished. Replace it with a new roll. {See page 16.)
2. My printed pictures don't look very clear.
e Did you position the autofocus frame (73) on your sub-
ject? (See pages 12 and 14.)
* Did you press the shutter release button gently while
taking care not to obstruct the autofocus window with
your fingers or hair? (See page 4.)
3. Zoom lens does not move.
® Are you continually pressing the shutter release button?
If so, the zoom lens cannot operate. Take your finger off
the shutter release button.
4. The zoom lens returned to the 35 mm position
automaticaily.
* Did you leave the camera with the main switch on ( | )
and not operate it for over three minutes? If so, the
camera retracted the lens to the 35 mm position to pro-
tect it. (See page 5.)
5. The flash-on mark ( % ) is flickering on the LCD
panel.
e Did you just use the Flash-Off or the Exposure Com-
pensation modes in a dark place? This is a warning
against underexposure. You cannot take a good picture
while this mark is flickering. (See pages 22 and 23.)
6.( ED) is flickering on the LCD panel.
e Did you insert the batteries upside down? Reinsert the
batteries correctly. (See page 34.)
7. There are red points on the eyes of subject in my picture.
e The RED EYE phenomenon occurs when the flash illumi-
nation reflects off the retina because the pupils open up
in the dark. Although it is impossible to prevent it entirely,
it can be minimized by lighting up the location up to
about EV8 level, or by shooting in a close distance from
the subject.
Do you know about film?
What is ISO?
ISO describes the sensitivity of film to light. The greater a
film's ISO rating, the more sensitive it is. Usually, color
negative film of ISO 100, 200 or 400 is used.
What is DX-coded film?
DX coding informs the camera of a film's ISO sensitivity,
so the camera can self-adjust to the film's speed. Almost
all negative-color film is DX-coded.
WARRANTY POLICY
All Pentax cameras purchased through authorized bona
fide photographic distribution channels are guaranteed
against defects of material or workmanship for a period of
twelve months from date of purchase. Service will be ren-
dered, and defective parts will be replaced without cost to
you within that period, provided the equipment does not
show evidence of impact, sand or liquid damage, mishan-
dling, tampering, battery or chemical corrosion, operation
contrary to operating instructions, or modification by an
unauthorized repair shop. The manufacturer or its author-
ized representatives shall not be liable for any repair or
alterations except those made with its written consent and
shall not be liable for damages from delay or loss of use
or from other indirect or consequential damages of any
kind, whether caused by defective material or workman-
ship or otherwise; and it is expressly agreed that the liabil-
Hy of the manufacturer or its representatives under all
guarantees or warranties, whether express or implied, is
strictly limited to the replacement of parts as hereinbefore
provided. No refunds will be made on repairs performed
by non-authorized Pentax service facilities.
Procedure During 12-month Warranty Period
Any Pentax which proves defective during the 12-month
warranty period should be returned to the dealer from
whom you purchased the equipment or to the
manufacturer. If there is no representative of the manufac-
turer in your country, send the equipment to the manufac-
turer, with postage prepaid. In this case, it will take a con-
siderable length of time before the equipment can be
returned to you owing to the complicated customs proce -
dures required in Japan in importing and re-exporting
photographic equipment. If the equipment is covered by
warranty, repairs will be made and parts replaced free of
charge, and the equipment will be returned to you upon
completion of servicing. If the equipment is not covered by
warranty, regular charges of the manufacturer or of its
representatives will apply. Shipping charges are to be
borne Sy the owner. If your Pentax was purchased outside
of the country where you wish to have it serviced during
the warranty period, regular handling and servicing fees
may be charged by the manufacturer's representatives in
that country. Notwithstanding this, your Pentax returned to
the manufacturer will be serviced free of charge according
to this procedure and warranty policy. in any case, how-
ever, shipping charges and customs clearance fees are to
be borne by the sender. To prove the date of your pur-
chase when required, please keep the receipts or bills
covering the purchase of your equipment for at least a
year. Before sending your equipment for servicing, please
make sure that you are sending it to the manufacturer's
authorized representatives or their approved repair
shops, unless you are sending it directly to the
manufacturer. Always obtain a quotation for the service
charge, and only after you accept the quoted service
charge, instruct the service station to proceed with the
servicing.
This warranty policy does not apply to Pentax pro-
ducts purchased in the U.S.A, U.K,, or Canada. The
local warranty policies available from Pentax
distributors in those countries supersede this war-
ranty policy.
С EE TEASE
> . > Фо
+ РЕ В LEE
Las ic
- =
о г Pi EE OF BEIN 7 E i ha N eT
+ EE PE ОН EEE E DALI EE a
EDEN RE as ETA eo oe Au
к - - e EE oF Ba NeT N -
NAMES OE:WORKING PARTS HS Mepis
* di x + a ait ant ОО - К . E Lu " ы
E a oi Joan abd nil on CUNT TET a
x
© Drive button
O Mode drive clear button
O Viewtinder eyepiece
® AF (Green) lamp
@ Flash (Red) lamp
O Back cover release ever
O Battery chamber cover
© Auxiliary rewind buttan
€) Mode button
@ LCD panel
@ Zooming lever
® Strap lugs
O Film information window
O Tripod socket
6) Back cover
2909 0006
SPECIFICATIONS
Type:
35 mm fully automatic leaf-shutter camera with built-in
zoom lens and auto flash.
Film:
Auto film speed setting with 35 mm perforated DX-
coded film with ISO rating from 50 to 1600. 24 x 36
mm format.
Lens:
Pentax power zoom 35 — 70 mm f/3.5 — 6.7, 7 ele-
ments in 6 groups. Two zooming speeds.
Focusing system:
Pentax infrared active auto focusing. Range: 1 m (3.3
ft) — infinity; 0.6 m (2 ft) — 1 m (3.3 ft in MACRO.
Exposure control:
Programmed auto-exposure control. Range: EV 6 —
16.5 in WIDE, EV 8 — 16.5 in TELE and MACRO at
Auto mode {ISO 100). +1.5 EV exposure compensa-
tion provided.
Viewfinder:
Zoom finder with albada-bright frame. Magnification:
approx. 0.49X (WIDE) — 0.90X (TELE).
Shutter:
Programmed AE between-the-lens shutter with
speeds approx. 1/5 sec. — 1/250 sec. and Bulb {1/2
— 8 sec.). Multiple exposure function provided.
SPECIFICATIONS ARE SUBJECT TO CHANGE AT ANT TIME WITHOUT NOTIFICATION
OR ANY OBLIGATION ON THE PART OF THE MANUFACTURER.
Self-timer:
10 second delay self-timer with LED indication. Dual-
frame self-timer mode provided.
Fiash:
Built-in zoom flash. Recycle time: approx. 3 sec. with
fresh lithium batteries.
Film loading/winding:
Auto film-loading. Two auto film-winding modes; single
frame mode and consecutive mode (1.2 sec./frame).
Film rewinding:
Auto start at end of roll. Auto stop upon completion of
rewinding. Rewinding in mid-roll provided.
Power source:
Two 3V lithium batteries (CR-123A or DL-123A)
Battery life:
Approx. 125 rolis of 24-exposure film without flash.
Size & weight:
137 (W) x 75.5 [H) x 48.5 (D) mm (5.4" x 3" x 1.97);
380 grams (13.4 oz.) without battery.
DATE model
imprinting mode:
“Year, Month and Day”, “Day, Hour and Minute” or
blank.
Size & weight:
137 (W) x 75.5 (H) x 50.5 (D) mm (5.47 x 3” x 2], 390
grams (13.8 oz.) without battery.
56706ENG
Asahi Optical Co., Ltd. C. P. O. 895, Tokyo 100-91. JAPAN
Pentax Europe n.v. Weiveldlaan 3-5, 1930 Zaventem, BELGIUM
Pentax Handelsgesellachaft mbH. Julius-Vosseler-Strasse, 104, 2000 Hamburg 54, GERMANY
Pentax U.K. Limited. Pentax House, South Hill Avenue, South Harrow, Middlesex HA2 OLT, UK.
Pentax France Z.i. Argenteuil, 12, rue Ambroise Croizat, 35100 Argenteuil, FRANCE
Pentax Nederland Spinveld 25, 4815 HR Breda, NETHERLANDS
Pentax (Schweiz) AG Industriestrasse 2, 8305 Dietlikon, SWITZERLAND
Pentax Scandinavia AB Falhagsleden 57, 75127 Uppsala, SWEDEN
Pentax Norge A.S. Cecilie Thoresens vei 11, 1153 Oslo 11, NORWAY
Pentax Corporation 35 Inverness Drive East, Englewood, Colorado 80112, US.A.
Pentax Canada Inc. 3131 Universal Drive, Mississauga, Ontario L4X 2E5, CANADA
Asahi Optical Brasileira Ind. e Com. Ltda. Rua Estados Unidos, 1053, Sao Paulo, BRASIL
Copyright € Asahi Optical Co. ltd. 1989
05-1:91 Printed in Japan
">