Images taken with this camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act.

Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display.

Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.

To users of this camera

• Do not use or store this camera in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage the stored data, or affect the camera’s internal circuitry and cause camera misoperation.

• The liquid crystal panel used for the monitor is manufactured using extremely high precision technology.

Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not illuminate or may illuminate when they should not.

However, this has no effect on the recorded image.

• In this manual, the generic term “computer(s)” refers to either a Windows PC or a Macintosh.

• In this manual, the term “battery(ies)” refers to any type of batteries used for this camera and its accessories.

Regarding User Registration

In order to better serve you, we request that you complete the user registration, which can be found on the CD-ROM supplied with the camera or on our website.

Thank you for your cooperation.

http://www.ricoh-imaging.com/registration/

Names and Functions of the Working Parts

Built-in flash

AF assist light

Lens mount index

Remote control receiver

Hot shoe

Image plane indicator

Microphone

Strap lug

Mirror

AF coupler

Lens unlock button

Lens information contacts

Viewfinder

Tripod socket

Monitor

Connection cable cover

Battery/memory card cover unlock lever

Battery/memory card cover

Diopter adjustment lever

Speaker

Microphone

Strap lug

HDMI terminal (type D)

USB terminal (micro B)

Terminal cover

Card access lamp

0 a

4 b

Operating Controls

6 d e f g

8 c

1 EV Compensation button (J/J)

Press to change the exposure compensation value. (p.29)

In K/L mode, use this button to switch the value to be changed between shutter speed and aperture value.

In playback mode, the last JPEG image taken can also be saved in RAW format.

2 Green button (M)

Resets the value being adjusted.

Switches to [ISO AUTO] when adjusting the sensitivity.

Also, you can assign other functions to this button.

3 Shutter release button (0)

Press to capture images. (p.25)

In playback mode, press halfway to switch to capture mode.

4 Main switch

Turns the power on/off, or switches to C (movie) mode.

(p.30)

When the camera is turned on, it enters A (still picture) mode and the lamp lights green. When the switch is turned to C, the camera enters C mode and the lamp lights red.

5 Grip lamps

The five lamps light up green during Self-timer shooting or shooting with a remote control unit, or when faces are detected during Live View.

6 Lens unlock button

Press to detach the lens on the camera. (p.20)

7 Flash pop-up button (1)

Press to pop up the built-in flash. (p.31)

8 Focus mode switch

Turn to change the focus mode.

9 Live View/Delete button (K/L)

Displays the Live View image. (p.25)

In playback mode, press to delete images. (p.33)

0 Playback button (3)

Switches to playback mode. (p.33)

Press the button again to switch to capture mode.

a MENU button (F)

Displays a menu. Press this button while the menu is

displayed to return to the previous screen. (p.11)

b INFO button (G)

Changes the style of the display on the monitor. (p.6, p.8)

c E-dial (V)

Changes the values for camera settings such as exposure.

(p.28)

You can change the menu tabs when a menu screen is

displayed. (p.11)

You can change the camera settings when the control panel

is displayed. (p.10)

In playback mode, use this to magnify an image or display

multiple images at the same time. (p.33)

d AF/AE Lock button (f)

Available for adjusting focus, instead of pressing 0 halfway, and for locking the exposure value before shooting.

e Four-way controller (ABCD)

Displays the Sensitivity, White Balance, Flash Mode or

Drive Mode setup menu. (p.10)

When a menu or the control panel is displayed, use this to move the cursor or change the item to set.

Press B in single image display of the playback mode to

display the playback mode palette. (p.34)

f OK button (E)

When a menu or the control panel is displayed, press this button to confirm the selected item.

Press this button when [AF Active Area] is set to E or 8, or when [Contrast AF] is set to g or h to change the focusing area.

When the power is turned on, the lamp lights blue. When the focusing area can be changed, the lamp turns off. g Mode dial

Changes the capture mode. (p.24)

When the power is turned on, the lamp lights white, and the icon of the set capture mode lights green on the dial.

About the indicator lamps

The main switch lamp, grip lamps, mode dial lamp and E lamp turn off in the following situations.

• From the time when 0 is pressed halfway until the end of shooting

• While f is pressed

• During playback mode

• While a menu is displayed

• During Auto Power Off

You can set the lamp lighting settings in [Indicator Lamps] of

the D3 menu. (p.17)

About the four-way controller

In this manual, each button of the fourway controller is indicated as shown in the illustration on the right.

Monitor

Capture Mode

With this camera, you can take pictures while looking through the viewfinder or while viewing the image on the monitor.

When using the viewfinder, you can take pictures while checking the status screen displayed on the monitor and looking through the viewfinder. When not using the viewfinder, you can take pictures while viewing the Live View image displayed on the monitor.

The camera is in “standby mode” when it is ready to shoot, such as when the status screen or Live View image is displayed.

Press G in standby mode to display the “control panel” and

change settings. (p.10) You can change the type of information

displayed in standby mode by pressing G while the control panel is displayed.

250

5.6

Standby mode

(Status screen)

Control panel

Status Screen

250

5.6

+1.0

12345

G1A1

1 Capture mode

2 AE Lock

3 Focus Method

4 Custom Image

5 Digital Filter/HDR

Capture

6 GPS positioning status

7 Wireless LAN status

8 AE Metering

9 Shake Reduction

10 Battery level

11 E-dial guide

12 Shutter speed

13 Aperture value

14 EV Compensation/

Exposure Bracketing

15 EV bar scale

2324

2 3

4 5 6 7 8 9 10

19 20 21

19 21 22

16 Sensitivity

17 Flash Exposure

Compensation

18 White Balance finetuning

19 Flash Mode

20 Focusing area (AF point)

21 Drive Mode

22 White Balance

23 File Format

24 Memory card

25 Image storage capacity

26 ASTROTRACER maximum tracking duration

27 Operation guide

250

5.6

Shooting Info Display selection screen

Live View

1 2 3 4 5 6 7 8 9 10 11

17 18 19

+1.7

20 21

±0EV

99999

22 23

Capture mode

Flash Mode

Drive Mode

4 White Balance

5 Custom Image

6 Digital Filter/HDR

Capture

7 GPS positioning status

8 Wireless LAN status

9 AE Metering

10 Shake Reduction/Movie

11 Battery level

12 Temperature warning

13 Histogram

14 EV Compensation

15 EV bar scale

16 Operation guide

17 AE Lock

18 Shutter speed

19 Aperture value

20 Sensitivity

21 File Format

22 Memory card

23 Image storage capacity

24 Face detection frame

(when [Contrast AF] is set to [Face Detection])

Control Panel

A mode

When shooting with Live View

C mode

Function name

Setting

3 Memory card

4 Number of recordable still pictures/Movie recordable time

5 Custom Image/Scene

Mode/Effects Mode

Digital Filter

3 4

27 28

7 HDR Capture

8 Highlight Correction

9 Shadow Correction

10 Distortion Correction

11 Lateral Chromatic

Aberration Adjustment

12 Peripheral Illumination

Correction

13 Diffraction Correction

14 AE Metering

15 AF Mode/Contrast AF

16 AF Active Area/Focus

Peaking

17 AF Assist Light

22 JPEG Quality

23 Shake Reduction/Movie

24 AA Filter Simulator

25 Framerate

18 High-ISO NR 26 Recording Sound Level

19 Slow Shutter Speed NR 27 Current date and time

20 File Format

21 JPEG Recorded Pixels/

28 Destination

Movie Recorded Pixels

Playback Mode

The captured image and shooting information are displayed in single image display of the playback mode.

Press G to change the type of information displayed in single image display. Use CD to select the type and press E.

Single image display

(Standard Information Display)

Playback Info Display selection screen

Viewfinder

When shooting with the viewfinder, the following information appears in the viewfinder.

2 3

t Memo

• You can adjust the diopter in the viewfinder using the diopter adjustment lever. If it is difficult to adjust the diopter adjustment lever, lift up and remove the eyecup.

Adjust the lever until the AF frame in the viewfinder looks sharp and clear.

1 1

4 5 6 7 8 9 10 11 12

1 AF frame

2 Spot metering frame

3 AF point

4 Flash indicator

5 Focus Method

6 Shutter speed

7 Aperture value

8 Focus indicator

9 EV bar scale

10 ISO/ISO AUTO

11 Sensitivity/Exposure compensation value

14 15 16 17 18

12 AE Lock

13 Change AF Point

14 AE Metering

15 Shake Reduction

16 Flash Exposure

Compensation

17 EV Compensation/

Exposure Bracketing

18 File Format

How to Change Function Settings

The camera functions and their settings can be selected and changed by using the following ways.

Direct keys

Control panel

Menus

Press ABCD in standby mode.

Press G in standby mode.

(indicated with the v icon in this manual)

Press F.

Using the Direct Keys

A Sensitivity

B White Balance

C Flash Mode

D Drive Mode

WXYZ

Using the Control Panel

G

You can set frequently used shooting functions. Press G in standby mode.

Use ABCD to select an item.

Use V to change settings.

Press E to make detailed settings.

Press F to cancel setting operation.

Press E to confirm the selected item and return to the control panel.

Using the Menus

Most functions are set from the menus. The functions that can be set on the control panel can also be set from the menus.

Use V to switch between menu tabs.

F

Use AB to select an item.

Menu tabs

Press F to exit the menu screen.

Press D to display the submenu.

Slow Shutter Speed NR

GPS

AE Metering

Digital Filter

Press D to display the pop-up menu.

High-ISO NR

Slow Shutter Speed NR

Use AB to select an item.

Press F to cancel the pop-up menu.

Press E to confirm the selected item.

Press F to return to the previous screen.

Menu List

Rec. Mode Menus

A 1

Item

Custom Image *1 *4

Scene Mode *2 *4

Effects Mode

*3 *4

Image

Capture

Settings

File Format *4

JPEG Recorded

Pixels *4

JPEG Quality *4

RAW File Format

AF Mode *4

AF Active Area

AF Assist Light

AE Metering

Digital Filter *4

HDR Capture *4

HDR

Capture

Bracket Value

Auto Align

Function

Sets the image finishing tone such as color and contrast before shooting an image.

Selects the scene mode that best suits the situation. (S mode)

Selects the special effects that can be added to pictures. (W mode)

Sets the file format of images.

Sets the recording size of images saved in JPEG format.

Sets the quality of images saved in JPEG format.

Sets the RAW file format.

Selects the autofocus method when shooting with the viewfinder.

Selects the area to adjust the focus when shooting with the viewfinder.

Sets whether to use the assist light when autofocusing in dark locations.

Selects the part of the sensor to use for measuring brightness and determining exposure.

Applies a digital filter effect when taking pictures.

Sets the type of high dynamic range shooting.

Sets the amount to change the exposure.

Sets whether to automatically adjust the composition.

Default Setting

Bright

Portrait

Faded Color

JPEG q m

PEF z

Auto

(11 AF Points)

Multi-segment

No Filter

Off

±2EV

Lens

Correction

Item

Distortion

Correction

Lat-Chromatic-Ab

Adj

Peripheral Illumin.

Corr.

Diffraction

Correction

Highlight

Correction

Shadow

Correction

Reduces lateral chromatic aberrations occurring due to lens properties.

Function

Reduces distortions occurring due to lens properties.

Reduces peripheral light fall-off occurring due to lens properties.

Corrects blur caused by diffraction when using a small aperture.

D-Range

Settings

High-ISO NR

Slow Shutter Speed NR

Expands the dynamic range and prevents overexposed areas from occurring.

Expands the dynamic range and prevents underexposed areas from occurring.

Sets the Noise Reduction setting when shooting with a high ISO sensitivity.

Sets the Noise Reduction setting when shooting with a slow shutter speed.

GPS

Contrast AF

Focus Peaking

Sets the camera action when the optional GPS unit is used.

Sets the AF Mode for shooting with Live View.

Emphasizes the outline of the subject in focus and makes it easier to check the focus.

Live View

Grid Display Displays the grid during Live View.

Histogram Display Displays the histogram during Live View.

Highlight Alert

AA Filter Simulator

Shake Reduction *4

Sets overexposed areas to blink red during Live View.

Applies low-pass filter effects using the Shake Reduction mechanism.

Activates the Shake Reduction function.

Input Focal Length

Sets the focal length when using a lens of which focal length information cannot be obtained.

Default Setting

Off

Auto

–

Face Detection

Off

35mm

Instant

Review

A 4

Button

Customization

Memory

Item

Display Time

Zoom Instant

Review

Save RAW Data

Function

Sets the Instant Review display time.

Sets whether to magnify the image during Instant Review.

Delete

Sets whether to save the RAW data during Instant Review.

Sets whether to allow deletion of the displayed image during

Instant Review.

Histogram Display Displays the histogram during Instant Review.

Highlight Alert Sets overexposed areas to blink red during Instant Review.

Sets the function for when f is pressed.

AF/AE-L Button

AF/AE-L

Button(Movie)

Green Button

Sets the function for when f is pressed in C mode.

E-Dial

Programming

Sets the function for when M is pressed.

Reverses the direction of rotation to increase value when V is turned.

Determines which settings to save when the power is turned off.

Default Setting

1sec.

Off

Enable AF1

Green Button

Rotate Right

On for settings other than Digital

Filter, HDR

Capture, and

Shooting Info

Display

*1 The function appears in modes other than S or W mode.

*2 The function appears in S mode.

*3 The function appears in W mode.

*4 The functions can also be set from the control panel.

Movie Menu

C 1

Digital Filter *1

Movie SR *1

Item

Movie Capture Settings

Recording Sound Level

Function

Sets the number of recorded pixels and the framerate of the movie.

Sets the Recording Sound Level and the volume level for recording.

Applies a digital filter effect when recording a movie.

Activates the Movie Shake Reduction function.

*1 The functions can also be set from the control panel.

Playback Menu

B 1

Item

Display Duration

Screen Effect

Slideshow Repeat Playback

Quick Zoom

Auto Movie

Playback

Highlight Alert

Auto Image Rotation

Protect All Images

Delete All Images

Default Setting u /30p

Auto

No Filter

Function

Sets an image display interval.

Sets a transition effect when the next image is displayed.

Starts the slideshow again from the beginning after the last image is displayed.

Plays back movies during the slideshow.

Sets the initial magnification when magnifying images.

Sets overexposed areas to blink red in Standard Information

Display or Histogram Display in playback mode.

Rotates images which were captured with the camera held vertically or of which the rotation information has been changed.

Protects all stored images at once.

Deletes all stored images at once.

Default Setting

3sec.

Off

–

Set-up Menus

Text Size

Item

Language/W

Date Adjustment

World Time

Sound Effects

LCD

Display

Guide Display

Display Color

LCD Display Settings

USB Connection

HDMI Out

Folder Name

Create New Folder

File Name

File No.

Sequential

Numbering

Reset File Number

Copyright Information

Function

Changes the display language.

Sets the date and time and the display format.

Switches between the date and time display of your hometown city and that of a specified city.

Sets whether to magnify the text size when selecting a menu item.

Switches the operation sound on/off and changes the volume for

In-focus, AE-L, Self-timer, Remote Control, Change AF Point, and

One Push File Format operations.

Sets whether to display the operation guides when the capture mode is changed.

Sets the display color of the status screen, control panel and menu cursor.

Adjusts the brightness, saturation and the color of the monitor.

Sets the USB connection mode when connecting to a computer.

Sets the output format when connecting to an AV device with an

HDMI input terminal.

Sets the folder name in which images are stored.

Creates a new folder on the memory card.

Sets the file name assigned to an image.

Sets whether to continue the sequential numbering for the file name when a new folder is created.

Resets the file number setting and returns to 0001 each time a new folder is created.

Sets the photographer and copyright information embedded in the

Exif data.

Default Setting

English

01/01/2014

Hometown

Std.

Volume 3/

All On

MSC

Auto

Date

–

IMGP/_IMG

–

Off

Menu Item

Flicker Reduction

D 3

Auto Power Off

Other Indicator

Lamps

Indicator

Lamps Self-timer

Remote Control

Wireless Memory Card

Reset

D 4

Pixel Mapping

Dust Removal

Sensor Cleaning

Format

Firmware Info/Options

Function

Cuts down on the screen flicker by setting the power frequency.

Sets the time until the camera turns off automatically if no operations are made for a certain period of time.

Lights up the main switch lamp, mode dial lamp, E lamp, and grip lamps when the power is turned on.

Lights up the grip lamps during the countdown for Self-timer shooting.

Lights up the grip lamps when shooting with a remote control unit.

Sets the camera action for when an Eye-Fi card or a Flucard is used.

Resets the settings of the direct keys and for the items of the A menu, C menu, B menu, D menu, control panel, and playback mode palette.

Maps out and corrects any defective pixels on the CMOS sensor.

Cleans the CMOS sensor by shaking it.

Locks the mirror in the up position for cleaning the CMOS sensor with a blower.

Formats a memory card.

Displays the camera’s firmware version. You can check the current firmware version before running an update.

Default Setting

50Hz

1min.

High

–

Off

–

Custom Setting Menus

Menu Item

1 EV Steps

2 Sensitivity Steps

3 Meter Operating Time

4 AE-L with AF Locked

E 1

5 Link AE and AF Point

6 Auto EV Compensation

7 Bulb (B) Mode Options

8 Bracketing Order

9 One-Push Bracketing

10 WB Adjustable Range

E 2

11 WB When Using Flash

12 AWB in Tungsten Light

13 Color Temperature Steps

14 Superimpose AF Area

Function

Sets the adjustment steps for exposure.

Sets the adjustment steps for ISO sensitivity.

Sets the meter operating time.

Sets whether to lock the exposure value when the focus is locked.

Sets whether to link the exposure and AF point in the focusing area.

Sets whether to automatically compensate when the proper exposure cannot be determined.

Sets the camera operation when pressing 0 in M mode.

Sets the order for Exposure Bracketing shooting.

Sets whether to shoot all frames with one release when using

Exposure Bracketing.

Sets whether to automatically fine-tune the white balance when the light source is specified for the white balance setting.

Default Setting

1/3 EV Steps

1 EV Step

10sec.

Off

Type1

0 - +

Off

Fixed

Sets the white balance setting for when using a flash.

Auto White

Balance

Sets the tungsten light color tone for when the white balance is set to [Auto White Balance].

Sets the adjustment steps for color temperature.

Sets whether to display the active AF point in red in the viewfinder.

Strong Correction

Kelvin

Item

15 AF.S Setting

16 1st Frame Action in AF.C

17 Action in AF.C Continuous

18 Hold AF Status

19 AF with Remote Control

20 Release While Charging

21 Color Space

22 Save Rotation Info

23 Save Menu Location

24 Catch-in Focus

25 AF Fine Adjustment

26 Using Aperture Ring

Reset Custom Functions

Function

Sets the action priority for when the focus mode is set to x and

0 is fully pressed.

Sets the action priority for the first frame when the focus mode is set to y and 0 is fully pressed.

Sets the action priority during Continuous Shooting when the focus mode is set to y.

Sets whether to maintain the focus for a certain amount of time when the subject happens to move out of the selected focusing area after being focused.

Sets whether to use autofocus when shooting with a remote control unit.

Sets whether to release the shutter while the built-in flash is being charged.

Sets the color space to use.

Sets whether to save rotation information when shooting.

Saves the last menu tab displayed on the monitor and displays it again the next time F is pressed.

Sets whether to enable Catch-in Focus shooting when a manual focus lens is attached. The shutter is released automatically when the subject comes into focus.

Allows you to precisely fine tune your lenses with the camera’s autofocus system.

Sets whether to enable the shutter to release when the lens aperture ring is set to a position other than 9 (Auto).

Resets all the settings of the Custom Setting menus to the defaults.

Default Setting

Focus-priority

Release-priority

Focus-priority

Off

Off sRGB

Reset Menu

Location

Off

Disable

–

Getting Your Camera Ready for

Use

Attaching the Strap

Pass the end of the strap through the strap lug and secure it on the inside of the clasp.

Attach the other end in the same manner.

Attaching a Lens

Make sure that the camera is turned off.

Remove the body mount

cover (1) and lens mount

cover (2).

After removing the cover, be sure to put the lens down with the lens mount side facing upward.

Align the lens mount index

(red dots: 3) on the camera and the lens, and secure by turning the lens clockwise until it clicks.

To remove the lens

Attach the lens cap, and then turn the lens counterclockwise while pressing the lens unlock button

(4).

Charging the Battery

Connect the AC plug cord to the battery charger.

Plug the AC plug cord into the power outlet.

Battery charger Indicator lamp

Face the A mark on the battery up, and insert it into the battery charger.

Insert the battery into the battery charger at an angle, and then fit into place.

The indicator lamp is lit while charging and turns off when the battery is fully charged.

(Approximate maximum charging time: 240 minutes)

AC plug cord

Inserting/Removing the Battery and

Memory Card

Open the battery/memory card cover.

Slide the battery/memory card cover unlock lever (1) before opening the cover.

Face the A mark on the battery towards the lens, and insert the battery until it locks into place.

To remove the battery, push the battery lock lever in the direction of 2.

Insert the card all the way into the memory card slot with the memory card label facing toward the monitor.

Push the memory card in once and release to remove.

Close the battery/memory card cover.

Setting the Display Language and Date/Time

Turn the main switch to

[ON].

The lamp lights up in green.

The [Language/W] screen appears.

Use ABCD to select the desired language and

press E.

The [Initial Setting] screen appears in the selected language.

Proceed to Step 7 if F

(Hometown) does not need to be changed.

Press B to move the frame to F and press D.

The [F Hometown] screen appears.

Use CD to select a city.

Use V to change the region.

Press B to select [DST] (daylight saving time),

and use CD to select Y or Z.

Press E.

The camera returns to the [Initial Setting] screen.

Press B to select [Text Size] and press D.

Use AB to select [Std.] or

[Large], and press E.

Selecting [Large] increases the text size of the selected menu items.

Press B to select [Settings

complete] and press E.

The [Date Adjustment] screen appears.

Press D, and use AB to select the date format.

Press D, and use AB to select 24h or 12h.

Press E.

The frame returns to [Date Format].

Press B, and then press D.

The frame moves to the month if the date format is set to

[mm/dd/yy].

Use AB to set the month.

Set the day, year and time in the same manner.

Press B to select

[Settings complete] and

press E.

The [LCD Display] screen appears.

Use CD to select a color.

Select the display color of the status screen, control panel and menu cursor from colors 1 to 12.

250

5.6

Press E.

The camera switches to capture mode and is ready to take a picture.

Formatting a Memory Card

Press F.

The A1 menu appears.

Use V to display D4 menu.

Use AB to select [Format] and press D.

The [Format] screen appears.

Press A to select [Format]

and press E.

D 4

Basic Shooting Operation

Shooting with the Viewfinder

Remove the front lens cap by pushing the top and bottom portions as indicated in the illustration.

Press F twice.

The camera switches to capture mode and is ready to take a picture.

Set the focus mode switch

to v.

Turn the mode dial to select a capture mode.

Turn the mode dial so that the desired capture mode is at the top of the dial.

The icon of the selected capture mode lights up in green.

The selected capture mode is displayed on the monitor (Guide

Display).

250

5.6

Look through the viewfinder to view the subject.

When using a zoom lens, turn the zoom ring to the right or left to change the angle of view.

Position the subject inside the AF frame and press

0 halfway.

Focus indicator

Press 0 fully.

The captured image is displayed on the monitor (Instant

Review).

Available operations during Instant Review

L Deletes the image.

Magnifies the image.

Saves the RAW data of the last JPEG image taken.

Shooting While Viewing the Live View Image

Press K in Step 4 of

“Shooting with the

Viewfinder” (p.24).

The Live View image is displayed on the monitor.

Position the subject inside the AF frame on the

monitor and press 0 halfway.

AF frame

Available operations during Live View

Magnifies the image.

Use V to change the magnification (up to

10×).

Use ABCD to change the area to display.

Press M to return the display area to the center.

Press E to return to 1× image display.

Exits the Live View shooting.

Subsequent steps are the same as shooting with the viewfinder.

Capture Modes for Still Pictures

Select the capture mode that suits the subject and shooting conditions.

The following capture modes are available on this camera.

Capture Mode

(Auto Picture modes)

Application

Automatically selects the optimal capture mode from a (Standard), b (Portrait), c (Landscape), d (Macro), e (Moving

Object), f (Night Scene Portrait), g

(Sunset), h (Blue Sky) or i (Forest).

Offers you various scene modes to choose from.

(Scene modes)

(Effects modes)

G /H/I/J/

K /L/M

(Exposure modes)

Takes images using various effects.

Changes the shutter speed, aperture value, and sensitivity.

t Memo

• The functions that can be set vary depending on the capture

mode. Refer to “Restrictions on Each Capture Mode” (p.35)

for details.

Scene Modes

Set the mode dial to S.

The scene mode selection screen appears.

Select a scene mode.

b c

Portrait

Landscape

For capturing portraits. Reproduces a healthy and bright skin tone.

For capturing landscape views.

Reproduces the vivid green of trees.

d e f

Macro

Moving

Object

Night Scene

Portrait

For capturing tiny objects at close focus range like flowers, coins, jewelry, and more.

For capturing images of fast moving subjects.

For capturing images of people in low light conditions, such as dusk or at night.

g h i

Sunset

Blue Sky

Forest

For capturing sunrises or sunsets in beautiful, vivid color.

For capturing images of blue sky.

Produces a more impressive deep blue.

Enhances colors of trees and sunbeams through foliage and produces a vivid color image.

j Night Scene Used for shooting at night.

k l

Night Scene

HDR

Night Snap

Takes three consecutive images at three different exposure levels to create a single composite image from them.

For taking snapshots in poorly lit place.

m o p q s

Food

Pet

Kids

Surf & Snow

Backlight

Silhouette

For capturing images of food.

Saturation will be rather high to make food look appetizing.

For capturing moving pets.

For capturing moving kids.

Reproduces healthy and bright skin tone.

For capturing images of dazzling backgrounds, such as snowy mountains.

Produces a silhouette image of subject in backlight condition.

t Candlelight For capturing scenes in candlelight.

Stage

Lighting

For capturing moving subjects in poorly lit place.

v Museum

For capturing images in places where a flash is prohibited.

Press E.

The camera is in standby mode.

Turn V to change the scene mode.

Effects Modes

Set the mode dial to W.

The effects mode palette appears.

Select an effects mode.

Faded Color

Clear Tone

Brilliant Color

Unicolor Bold

Vintage Color

Cross Processing

Warm Fade

Bold Monochrome

Infrared Filter

Vibrant Color Enhance

Press E.

The camera is in standby mode.

Turn V to change the effects mode.

t Memo

• The parameters for the selected effects mode can be changed before shooting.

Exposure Modes

Mode x : Available #: Restricted × : Not available

Change

Shutter

Speed

Change

Aperture

Value

Change

Sensitivity

EV Compensation

Program Automatic

Exposure

Sensitivity Priority

Automatic Exposure

Shutter Priority

Automatic Exposure

Aperture Priority

Automatic Exposure

Shutter & Aperture

Priority Automatic

Exposure

Manual Exposure

Bulb Exposure

× x

× x x

# *1

× x x x x x

x x x

x x x x

*1 You can set the value to be changed in [Button Customization] of the

A 4 menu.

*2 [ISO AUTO] is not available.

*3 Fixed to [ISO AUTO].

Turn the mode dial to select the desired exposure mode.

V appears on the status screen for the value that can be changed.

4.5

The value that can be changed is underlined in the viewfinder.

During Live View, D appears for the value that can be changed.

Turn V.

In K/L mode, press J to select the value to be changed.

Setting the Sensitivity

Press A in standby mode.

Use AB to select an item.

ISO

AUTO

ISO

Sets the range to be adjusted automatically.

The upper limit can be changed.

Sets a fixed value between ISO 100 to

ISO 51200.

Use V to change the value.

Press E.

The camera returns to standby mode.

W EV Compensation

Press J, and then turn V.

e and the compensation value are displayed on the status screen, Live View screen, and in the viewfinder during adjustment.

250

5.6

Available operations

J Starts/ends adjusting the compensation value.

M Resets the adjustment value to the default setting.

Recording Movies

Turn the main switch to

C .

The lamp lights red and the Live

View image is displayed.

Sound

Recordable Time

Turn the mode dial to select the desired capture mode.

The following settings are available depending on the capture mode.

W Select an effects mode.

J /K/L

Set the exposure. (The aperture value can be set only before shooting. In L mode, the sensitivity can also be changed.)

Other modes The camera operates in G mode.

Focus on the subject.

In v mode, press 0 halfway.

Press 0 fully.

Movie recording starts.

In the upper left area of the monitor, “REC” blinks and the size of the file being recorded is displayed.

Press 0 fully again.

Movie recording stops.

Return the main switch to the [ON] position to

exit C mode.

The camera returns to shooting with the viewfinder in A mode.

Setting the Flash Mode

Press C in standby mode.

Select a flash mode.

Y

Press E.

The camera returns to standby mode.

Press 1.

The built-in flash is popped up.

Auto Flash

Discharge

Auto Flash

+Red-eye

Reduction

Automatically measures the ambient light and determines whether to use the flash.

Discharges a pre-flash for red-eye reduction before an automatic flash.

Flash On

+Red-eye

Reduction

Slow-speed

Sync

Slow-speed

Sync+Redeye

Trailing

Curtain

Sync

Discharges a flash for each picture.

Discharges a pre-flash for red-eye reduction before the main flash and discharges a flash for each picture.

Sets to a slow shutter speed.

Use this, for example, when shooting a portrait with the sunset in the background.

Discharges a pre-flash for red-eye reduction before the main flash is discharged with Slowspeed Sync.

Discharges a flash immediately before closing the shutter.

Sets to a slow shutter speed.

Captures moving objects as if they are leaving a light trail behind them.

Manual

Flash

Discharge

Sets the amount of flash discharge between

FULL and 1/128 power.

t Memo

• The flash modes that can be selected vary depending on the capture mode.

Setting the Drive Mode

Press D in standby mode.

Select a drive mode.

Z

Setting the White Balance

Press B in standby mode.

Select the White Balance.

Single Frame Shooting

(L)

Normal capture mode

Continuous Shooting

(Z/b)

Self-timer

(O/P)

Remote Control

(Q/R)

Continuously takes pictures while

0 is kept pressed.

The framerate varies according to the shutter speed.

Releases the shutter about 12 seconds or 2 seconds after

0 is pressed.

Enables shooting with remote control.

Select from [Remote Control] or

[Remote Control (3 sec. delay)].

Exposure Bracketing

(T)

Takes three consecutive images at different exposure levels.

Press E.

The camera returns to standby mode.

u Caution

• There are restrictions on some drive modes when used in some capture modes or in combination with some other

functions. (p.35)

WB±

Cancel g j g Auto White Balance u Multi Auto White Balance h

Daylight i Shade

Cloudy k q Fluorescent - Daylight Color r Fluorescent - Daylight White s Fluorescent - Cool White t Fluorescent - Warm White l Tungsten m

Flash n Color Temperature Enhancement o

Manual White Balance p Color Temperature

Press E.

The camera returns to standby mode.

X

Reviewing Images

Press 3.

The camera enters playback mode and the most recently captured image is displayed

(single image display).

Review the captured image.

Available operations

C Displays the previous image.

V to the right

Displays the next image.

Deletes the image.

Magnifies the image (up to 16×).

Use ABCD to change the area to display.

Press M to return the display area to the center.

Press E to return to the entire image display.

V to the left

Switches to the thumbnail display.

Saves the RAW data (only when a

JPEG image was taken and the data remains in the buffer).

Changes the type of information displayed.

Displays the playback mode palette.

Playing Back Movies

Available operations

Press and hold D

Press and hold C

Plays back/pauses a movie.

Forwards a frame (when paused).

Fast-forwards playback.

Reverses a frame (when paused).

Fast-reverses playback.

Stops playback.

Adjusts the volume (6 levels).

Saves the displayed frame as a

JPEG file (when paused).

Playback Mode Palette

Playback functions can be set from the playback mode palette as well as the B1 menu.

With the playback mode palette, you can use image editing functions and other playback functions.

Item a

Image

Rotation

b Digital Filter

Color Moiré

Correction *1 *2

Function

Changes the rotation information of images.

Processes images with digital filters.

Reduces color moiré in images.

d e f h i j k

Resize

Cropping

Protect

Slideshow

Save as Manual

Save Cross

Processing

RAW

*1 *2

Development *3

Changes the number of recorded pixels of the image.

Crops out only the desired area of an image.

Protects images from being accidentally erased.

Plays back images one after another.

Saves the white balance settings of the captured image as Manual White

Balance.

Saves the settings used for an image captured in Cross Processing mode of

Custom Image as your “Favorite” settings.

Develops RAW images into JPEG images and saves them as a new file.

l m

Item

Movie Edit

Eye-Fi Image

Transfer

*1 *5

Function

Divides a movie or deletes unwanted segments.

Transfers selected images wirelessly using an optional Eye-Fi card.

*1 Not available when a movie is displayed.

*2 Not available when a RAW image is displayed.

*3 Available only when a RAW image is saved.

*4 Available only when a movie is displayed.

*5 Available only when an Eye-Fi card is inserted.

Restrictions on Each Capture Mode

× : Not available

Capture Mode

Function

Sensitivity

Flash

Continuous

Shooting

Self-timer

Remote Control

Exposure

Bracketing

Focus Method

R bf cdi mq eo ze

S ghj stv k

× x

× p u

*2 y

× ye

*2 y

W M

RAW/RAW+ ×

Shake Reduction

White Balance

Custom Image

Capture Mode

Function

Digital Filter

HDR Capture

AA Filter Simulator

R bf cdi mq eo

S ghj stv k

Save RAW Data

*1 [ISO AUTO] is not available.

*2 Fixed to; the setting cannot be changed.

*3 Fixed to a specific setting; the setting cannot be changed.

*4 Specific settings are used.

*5 [Bracketing] is not available.

Restrictions on the Combinations of Special Functions

Flash

File Format RAW/RAW+

Shake Reduction

Digital Filter

AA Filter Simulator

Save RAW Data

*1 [Bracketing] is not available.

Continuous

Shooting

× l p

× u

W M

× ×

Drive Mode

Self-timer Remote Control

Exposure

Bracketing

× ×

× : Not available

HDR Capture

Functions Available with Various

Lenses

All capture modes are available when a DA, DA L, or FA J lens is used, or when a lens with an 9 position is used with the aperture ring set to the 9 position.

When other lenses than above are used, or a lens with 9 position is used in a position other than 9, the following restrictions apply.

x : Available #: Restricted

: Not available

Lens

[Mount type]

DA L

D FA

FA J

A M

Function

]

AF2

]

AF3

]

AF2

]

] [K

] [K]

Autofocus

(Lens only)

(With AF adapter 1.7×)

Manual focus

(With focus indicator)

(With matte field)

Quick-shift focus x

– x

– x x

– x

–

# x

–

# x

Focus point selection mode [Auto] x

AE Metering [Multi-segment]

G /H/I/J/K mode x x

× × × × x x #

× x x x x x x

L mode

P-TTL auto flash

Automatically obtaining the lens focal length information

Lens Correction x x x

x x x

x x x x # x

× ×

× × ×

*1 Lenses with a maximum aperture of F2.8 or faster. Only available at the 9 position.

*2 Lenses with a maximum aperture of F5.6 or faster.

*3 Available when using the built-in flash, AF540FGZ, AF540FGZ II,

AF360FGZ, AF360FGZ II, AF200FG or AF160FC.

*4 Only available with compatible lenses.

*5 Distortion Correction and Peripheral Illumination Correction are disabled when a DA FISH-EYE 10-17mm lens is used.

*6 To use an FA SOFT 28mm F2.8 lens, FA SOFT 85mm F2.8 lens, or

F SOFT 85mm F2.8 lens, set [26 Using Aperture Ring] to [Enable] in the E4 menu. Pictures can be taken with the aperture you set, but only within a manual aperture range.

*7 Only available with an FA 31mm F1.8 Limited, FA 43mm F1.9

Limited, or FA 77mm F1.8 Limited lens.

*8 Fixed to [Spot].

*9 J with the aperture set to wide open. (The aperture ring has no effect on the actual aperture value.)

Lens Names and Mount Names

DA lenses with a motor and FA zoom lenses with power zoom use the K AF2 mount. DA lenses with a motor and no AF coupler use the K

AF3

mount.

FA single focal length lenses (non-zoom lenses), DA or DA

L lenses without a motor, and D FA, FA J and F lenses use the K AF mount.

Refer to respective lens manuals for details.

Main Specifications

Model Description

Type

Lens Mount

Compatible

Lenses

TTL autofocus, auto-exposure SLR digital camera with a built-in retractable P-TTL flash

PENTAX K AF2 bayonet mount (AF coupler, lens information contacts, K-mount with power contacts)

AF3

, K

AF2

(power zoom not compatible), K

, K

A mount lenses

Image Capture Unit

Image Sensor

Effective Pixels

Total Pixels

Dust Removal

Sensitivity

(Standard Output)

Primary color filter, CMOS, Size: 23.5 × 15.6 (mm)

Approx. 20.12 megapixels

Approx. 20.42 megapixels

SP coating and CMOS sensor vibration

ISO AUTO/100 to 51200 (EV steps can be set to 1

EV, 1/2 EV, or 1/3 EV)

Image Stabilizer Sensor-shift Shake Reduction

AA Filter

Simulator

Moiré reduction using SR unit: OFF/Type1/Type2/

Bracketing

File Formats

Recording

Formats

Recorded Pixels

Quality Level

Color Space

Storage Media

RAW (PEF/DNG), JPEG (Exif 2.30), DCF 2.0 compliant

JPEG: q (20M: 5472×3648), p (12M:

4224×2816), o (6M: 3072×2048), r (2M:

1920×1280)

RAW: q (20M: 5472×3648)

RAW (12bit): PEF, DNG

JPEG: m (Best), l (Better), k (Good)

RAW + JPEG simultaneously recordable sRGB, AdobeRGB

SD/SDHC*/SDXC* memory card, Eye-Fi card,

FLUCARD (*UHS-I compatible)

Storage Folder

Storage File

Folder Name: Date (100_1018, 101_1019...) or a user-assigned name (default: PENTX)

File Name: user-assigned name (default: IMGP****)

File No.: Sequential Numbering, Reset

Viewfinder

Type Pentaprism Finder

Coverage (FOV) Approx. 100%

Magnification

Eye-Relief Length

Approx. 0.95× (50mm F1.4 at infinity)

Approx. 20.5 mm (from the view window),

Approx. 22.3 mm (from the center of lens)

Diopter

Adjustment

Focusing

Screen

Approx. -2.5 to +1.5 m

Interchangeable Natural-Bright-Matte III focusing screen

-1

Live View

Type

Focusing

Mechanism

Display

TTL method using CMOS image sensor

Contrast detection (Face Detection, Face Detection

Assist, Tracking, Multiple AF Points, Select, Spot)

Focus Peaking: ON/OFF

Field of view: approx. 100%, Magnified view (2×, 4×,

8×, 10×), Grid Display (4 × 4 Grid, Golden Section,

Scale), Histogram, Highlight Alert

LCD Monitor

Type

Size

Dots

Adjustment

TFT color LCD monitor, wide angle viewing

3.0 inches

Approx. 921K dots

Brightness, saturation and colors adjustable

White Balance

Type

Method using a combination of the CMOS image sensor and the light source detection sensor

Preset Modes

Auto White Balance, Multi Auto White Balance,

Daylight, Shade, Cloudy, Fluorescent Light (D:

Daylight Color, N: Daylight White, W: Cool White, L:

Warm White), Tungsten Light, Flash, n, Manual

White Balance, Color Temperature, Copying the white balance settings of a captured image

Fine Adjustment Adjustable ±7 steps on A-B axis and G-M axis

Autofocus System

Type

Focus Sensor

TTL: phase-matching autofocus

SAFOX IX i+, 11 points (9 cross type focus points in the center)

Brightness Range EV -1 to 18 (ISO100, at normal temperature)

AF Modes

Single AF (x), Continuous AF (y), Auto select AF (z)

Focus Point

Selection Modes

AF Assist Light

Auto (5 AF Points), Auto (11 AF Points), Select,

Expanded Area AF, Spot

Dedicated LED AF assist light

Exposure Control

Type

TTL open-aperture 77 segment metering

Metering Modes: Multi-segment metering, Centerweighted metering, Spot metering

Metering Range EV 0 to 22 (ISO100 at 50mm F1.4)

Exposure Modes

Auto Picture modes: Standard, Portrait, Landscape,

Macro, Moving Object, Night Scene Portrait, Sunset,

Blue Sky, Forest

Scene Modes: Portrait, Landscape, Macro, Moving

Object, Night Scene Portrait, Sunset, Blue Sky,

Forest, Night Scene, Night Scene HDR*, Night Snap,

Food, Pet, Kids, Surf & Snow, Backlight Silhouette,

Candlelight, Stage Lighting, Museum

*JPEG only

Effects Modes: Faded Color, Clear Tone, Brilliant

Color, Unicolor Bold, Vintage Color, Cross

Processing, Warm Fade, Bold Monochrome,

Infrared Filter, Vibrant Color Enhance

Program, Sensitivity Priority, Shutter Priority, Aperture

Priority, Shutter & Aperture Priority, Manual, Bulb

EV Compensation ±5 EV (1/3 EV steps or 1/2 EV steps can be selected)

AE Lock Can be assigned to f from the menu.

Shutter

Type

Shutter Speed

Electronically controlled vertical-run focal plane shutter

Auto: 1/6000 to 30 seconds, Manual: 1/6000 to 30 seconds (1/3 EV steps or 1/2 EV steps), Bulb

Drive Modes

Mode Selection

Continuous

Shooting

Still image: Single frame, Continuous (H, L), Selftimer (12 sec., 2 sec.), Remote Control (0 sec., 3 sec.), Exposure Bracketing

Movie: Remote Control Off, Remote Control

Max. approx. 5.4 fps, JPEG (q: m at

Continuous H): 20 frames, RAW: 5 frames, RAW+: 4 frames

Max. approx. 3.0 fps, JPEG (q: m at

Continuous L): 100 frames, RAW: 8 frames, RAW+:

4 frames

*When the sensitivity is set to ISO100.

Flash

Built-in Flash

Flash Modes

Sync Speed

Flash Exposure

Compensation

External Flash

Built-in retractable P-TTL pop-up flash

Guide number: approx. 10 (ISO100/m)

Angle of view coverage: equivalent to 28mm lens in

35 mm format

Auto Flash Discharge, Auto Flash + Red-eye

Reduction (Auto Picture, Scene Mode) Flash On,

Flash On + Red-eye Reduction, Slow-speed Sync,

Slow-speed Sync + Red-eye, Trailing Curtain Sync,

Manual Flash Discharge (FULL to 1/128 power)

1/180 sec.

-2.0 to +1.0 EV

P-TTL, Leading Curtain Sync, Trailing Curtain Sync,

Contrast-control-sync, High-speed Sync, Wireless

Sync (available with 2 dedicated external flashes)

Capture Functions

Custom Image

Bright, Natural, Portrait, Landscape, Vibrant,

Radiant, Muted, Bleach Bypass, Reversal Film,

Monochrome, Cross Processing

Cross Processing Random, Preset 1-3, Favorite 1-3

Noise Reduction Slow Shutter Speed NR, High-ISO NR

Dynamic Range

Settings

Highlight Correction, Shadow Correction

Lens Correction

Digital Filter

HDR Capture

Distortion Correction, Lateral Chromatic Aberration

Correction, Peripheral Illumination Correction,

Diffraction Correction

Extract Color, Replace Color, Toy Camera, Retro,

High Contrast, Shading, Invert Color, Unicolor Bold,

Bold Monochrome

Auto, Type1, Type2, Type3

Bracket Value adjustable

Auto Align (automatic composition correction)

Movie

File Format

Recorded Pixels

Framerate

Sound

Recording Time

MPEG-4 AVC/H.264 (MOV) u (1920×1080, 30p/25p/24p) t (1280×720, 60p/50p)

Built-in stereo microphone

Recording Sound Level adjustable

Up to 4 GB or 25 minutes; automatically stops recording if the internal temperature of the camera becomes high.

Custom Image

Bright, Natural, Portrait, Landscape, Vibrant,

Radiant, Muted, Bleach Bypass, Reversal Film,

Monochrome, Cross Processing

Cross Processing Random, Preset 1-3, Favorite 1-3

Digital Filter

Extract Color, Replace Color, Toy Camera, Retro,

High Contrast, Shading, Invert Color, Unicolor Bold,

Bold Monochrome

Playback Functions

Playback View

Delete

Digital Filter

RAW

Development

Editing Features

Single frame, Multi-image display (6, 12, 20, 35, and

80 thumbnails), Image magnification (Up to 16×, quick zoom), Rotated image display, Histogram (Y histogram, RGB histogram), Highlight Alert, Detailed

Information Display, Copyright Information

(Photographer, Copyright Holder), Folder Display,

Calendar Filmstrip Display, Slideshow, GPS information (Latitude, Longitude, Altitude,

Coordinated Universal Time (UTC)), Direction

Single image, all images, select & delete, folder,

Instant Review image

Base Parameter Adj, Extract Color, Replace Color,

Toy Camera, Retro, High Contrast, Shading, Invert

Color, Unicolor Bold, Bold Monochrome, Tone

Expansion, Sketch, Water Color, Pastel,

Posterization, Miniature, Soft, Starburst, Fish-eye,

Slim, Monochrome

Development options: Select single image, Select multiple images, Select a folder

Development parameters: File Format (JPEG),

Aspect Ratio, JPEG Recorded Pixels, JPEG Quality,

Color Space, Distortion Correction, Lat-Chromatic-

Ab Adj, Peripheral Illumin. Corr., Diffraction

Correction, Color Fringe Correction, White Balance,

Custom Image, Digital Filter, Sensitivity, High-ISO

NR, Shadow Correction

Color Moiré Correction, Image Rotation, Resize,

Cropping (aspect ratio can be changed and tilt correction is available), Movie Edit (dividing a movie file and deleting unwanted segments), Capturing a

JPEG still picture from a movie, Save RAW Data,

Eye-Fi Image Transfer

Customization

Custom Functions 26 items

Mode Memory 11 items

E-Dial

Programming/

Button

Customization

AF Customization

Text Size

World Time

AF Fine

Adjustment

Information

M button: Green Button, One Push File Format,

Optical Preview, Digital Preview, AF Active Area f button: Enable AF1, Enable AF2, Cancel AF,

AE Lock

E-Dial: Rotate Right, Rotate Left

AF.S Setting: Focus-priority, Release-priority

1st Frame Action in AF.C: Release-priority, Auto,

Focus-priority

Action in AF.C Continuous: Focus-priority, Auto,

FPS-priority

Hold AF Status: Off, Low, Medium, High

Standard, Large

World Time settings for 75 cities (28 time zones)

±10 steps, adjustment for all lenses or individual lenses (up to 20 values can be saved)

Names of “Photographer” and “Copyright Holder” are embedded to the image file. A revision history can be checked using the provided software.

Power Supply

Battery Type

AC Adapter

Battery Life

Rechargeable Lithium-ion Battery D-LI109

AC Adapter Kit K-AC128 (optional)

Number of recordable images:

(with 50% flash usage): approx. 410 images,

(without flash usage): approx. 480 images

Playback time: approx. 270 minutes

• Tested in compliance with CIPA standard using a fully charged lithium-ion battery at a temperature of 23°C.

Actual results may vary depending on the shooting conditions/circumstances.

Interfaces

Connection Port

USB 2.0 (micro B, high-speed compatible), HDMI output terminal (Type D)

USB Connection MSC/PTP

Dimensions and Weight

Dimensions

Weight

Approx. 120 mm (W) × 92.5 mm (H) × 69.5 mm (D)

(excluding protrusions)

Approx. 558 g (Including dedicated battery and SD

Memory Card)

Approx. 498 g (body only)

Included Accessories

Package

Contents

Software

Strap O-ST132, Rechargeable Lithium-ion Battery

D-LI109, Battery Charger D-BC109, AC plug cord,

Software (CD-ROM) S-SW151, Start Guide

<Mounted to the camera> Eyecup F

, Hot shoe cover F

, Body mount cover

Digital Camera Utility 5

Optional Accessories

GPS Unit

FLUCARD

O-GPS1: GPS information (Latitude, Longitude,

Altitude, Coordinated Universal Time (UTC)),

Direction, Electronic Compass, ASTROTRACER

Remote capture, image browsing

Approximate Image Storage Capacity and

Playback Time

(When using the fully charged battery)

Battery

Temperature

Normal

Shooting

Flash Photography

50%

Use

100%

Use

Playback

Time

D-LI109 23°C 480 410 360

270 minutes

• The image storage capacity (normal recording and flash use 50%) is based on measuring conditions in accordance with CIPA standards, while other data is based on our measuring conditions. Some deviation from the above figures may occur in actual use depending on the selected capture mode and shooting conditions.

Approximate Image Storage Capacity by Size

(When using a 2 GB memory card)

Recorded

Pixels q 20M p 12M o 6M r 2M m

JPEG Quality l

134

224

304

503

418

1024

917

2119 k

596

975

1707

3615

PEF

–

DNG

–

• The number of storable images may vary depending on the subject, shooting conditions, selected capture mode and memory card, etc.

Operating Environment for USB Connection and Provided Software

With the provided software “Digital Camera Utility 5”, you can develop RAW files, make color adjustments, or check shooting information on a computer. Install the software from the provided CD-ROM (S-SW151).

We recommend the following system requirements to connect the camera to a computer and to use the software.

Windows

CPU

RAM

Windows 8.1 (32-bit, 64-bit), Windows 8 (32-bit,

64-bit), Windows 7 (32-bit, 64-bit) or Windows

Vista (32-bit, 64-bit)

Intel Core 2 Duo or higher

2 GB or more

HDD

For installing and starting up the program: 100 MB or more of available space

For saving image files: Approx. 5 MB/file (JPEG),

Approx. 25 MB/file (RAW)

Monitor 1280×1024 dots, 24-bit full color or higher

Macintosh

CPU

OS X 10.9, 10.8 or 10.7, or Mac OS X 10.6

Intel Core 2 Duo or higher

RAM

HDD

2 GB or more

For installing and starting up the program: 100 MB or more of available space

For saving image files: Approx. 5 MB/file (JPEG),

Approx. 25 MB/file (RAW)

Monitor 1280×1024 dots, 24-bit full color or higher

t Memo

• QuickTime is required to play back movies transferred to a computer with an OS other than Windows 8 and Windows

8.1. (A computer with Windows 8 or Windows 8.1 can play back movies with a pre-installed player software.)

You can download it from the following site: http://www.apple.com/quicktime/download/

For Using Your Camera Safely

We have paid close attention to the safety of this camera. When using this camera, we request your special attention regarding items marked with the following symbols.

Warning

This symbol indicates that ignoring this item could cause serious personal injuries.

Caution

This symbol indicates that ignoring this item could cause minor or medium personal injuries, or loss of property.

About the Camera

Warning

• Do not disassemble or modify the camera. High voltage areas are present inside the camera, with the risk of electric shock.

• If the camera interior is exposed due to dropping or otherwise damaging the camera, never touch the exposed portion. There is a risk of electric shock.

• Do not aim the camera at the sun or other strong light sources when taking pictures or leave the camera sitting in direct sunlight with a lens cap off. Doing so may cause the camera to malfunction or cause a fire.

• Do not look at the sun or other strong light sources through a lens. Doing so may lead to a loss of eyesight or cause vision to be impaired.

• If any irregularities occur during use, such as smoke or a strange odor, stop use immediately, remove the battery or the AC adapter, and contact your nearest service center. Continued use can cause a fire or electrical shock.

Caution

• Do not place your finger over the flash when discharging the flash. You may burn yourself.

• Do not cover the flash with clothing when discharging the flash.

Discoloration may occur.

• Some portions of the camera heat up during use. There is a risk of low temperature burns when holding such portions for long periods.

• Should the monitor be damaged, be careful of glass fragments. Also, be careful not to allow the liquid crystal to get on your skin or in your eyes or mouth.

• Depending on your individual factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately.

About the Battery Charger and AC Adapter

Warning

• Always use the battery charger and AC adapter exclusively developed for this camera, with the specified power and voltage. Using a battery charger or AC adapter not exclusive to this camera, or using the exclusive battery charger or AC adapter with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown. The specified voltage is 100 - 240V AC.

• Do not disassemble or modify the product. This can cause a fire or electrical shock.

• If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue using and consult your nearest service center. Continued use can cause a fire or electrical shock.

• If water should happen to get inside the product, consult your nearest service center. Continued use can cause a fire or electrical shock.

• If you see a lightning flash or hear thunder during use of the battery charger or AC adapter, unplug the power plug and discontinue using.

Continued use can cause damage to the product, fire or electrical shock.

• Wipe off the power plug if it should become covered with dust.

Accumulated dust may cause a fire.

• To reduce the risk of hazards, use only CSA/UL certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a specified

NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.

Caution

• Do not place or drop heavy objects on or forcefully bend the AC plug cord. Doing so may damage the cord. Should the AC plug cord be damaged, consult your nearest service center.

• Do not touch or short-circuit the terminal area of the AC plug cord while the cord is plugged in.

• Do not handle the power plug with wet hands. This can cause an electric shock.

• Do not drop the product, or subject it to violent impact. This can cause the product to breakdown.

• Do not use the battery charger D-BC109 to charge batteries other than the rechargeable lithium-ion battery D-LI109. Attempting to charge other types of batteries may cause an explosion or heating, or may damage the battery charger.

About the Rechargeable Lithium-ion Battery

Warning

• If any leakage from the battery should come in contact with your eyes, do not rub them. Flush your eyes with clean water and get medical attention immediately.

Caution

• Only use the specified battery with this camera. Use of other batteries may cause an explosion or fire.

• Do not disassemble the battery. Disassembling the battery may cause an explosion or leakage.

• Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal.

• Keep wires, hairpins, and other metal objects away from the + and - contacts of the battery.

• Do not short the battery or dispose of the battery in fire. This can cause an explosion or fire.

• If any leakage from the battery should come in contact with skin or clothing, it may cause irritation to the skin. Wash the affected areas thoroughly with water.

• Precautions for D-LI109 Battery Usage:

- USE SPECIFIED CHARGER ONLY.

- DO NOT INCINERATE.

- DO NOT DISASSEMBLE.

- DO NOT SHORT CIRCUIT.

- DO NOT EXPOSE TO HIGH TEMP. (140°F / 60°C)

Keep the Camera and its Accessories out of the

Reach of Small Children

Warning

• Do not place the camera and its accessories within the reach of small children.

1.If the product falls or is operated accidentally, it may cause serious personal injuries.

2.Wrapping the strap around a neck may cause suffocation.

3.To avoid the risk of a small accessory such as the battery or memory cards from being swallowed by mistake, keep them out of the reach of small children. Seek medical attention immediately if an accessory is accidentally swallowed.

Care to be Taken During Handling

Before Using Your Camera

• When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or when traveling). Contents of the recording cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media (memory cards), etc.

About the Battery and Charger

• To keep the battery in optimum condition, avoid storing it in a fully charged state or in high temperatures.

• If the battery is left inserted and the camera is not used for a long time, the battery will over-discharge and shorten the battery’s life.

• Charging the battery a day before use or on the day of use is recommended.

• The AC plug cord provided with this camera is developed exclusively for the battery charger D-BC109. Do not use it with other devices.

Precautions on Carrying and Using Your Camera

• Do not subject the camera to high temperatures or high humidity. Do not leave the camera in a vehicle, as the temperature can get very high.

• Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion to protect the camera from vibrations of motorcycles, automobiles, or ships.

• The temperature range for camera use is 0°C to 40°C (32°F to 104°F).

• The monitor may appear black at high temperatures, but will return to normal at normal temperatures.

• The monitor may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a malfunction.

• Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, and remove it after temperatures of the camera and surroundings are equalized.

• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt.

These could cause the camera to breakdown. Wipe the camera to dry off any rain or water drops.

• Do not press on the monitor with excessive force. This could cause it to break or malfunction.

• Be careful not to overtighten the screw in the tripod socket when using a tripod.

Cleaning Your Camera

• Do not clean the camera with organic solvents such as thinner, alcohol, and benzine.

• Use a lens brush to remove dust accumulated on the lens. Never use a spray blower for cleaning as it may damage the lens.

• Please contact your nearest service center for professional cleaning of the CMOS sensor. (This will involve a fee.)

• Periodic inspections are recommended every one to two years to maintain high performance.

Storing Your Camera

• Do not store the camera with preservatives or chemicals. Storage in high temperatures and high humidity can cause mold to grow on the camera.

Remove the camera from its case and store it in a dry and well-ventilated place.

• Avoid using or storing the camera where it may be exposed to static electricity or electrical interference.

• Avoid using or storing the camera in direct sunlight or in locations where it may be exposed to rapid changes in temperature or to condensation.

About SD Memory Cards

• The SD Memory Card is equipped with a write-protect switch. Setting the switch to

LOCK prevents new data from being recorded on the card, the stored data from being deleted, and the card from being formatted by the camera or computer.

Write-protect switch

• The SD Memory Card may be hot when removing the card immediately after using the camera.

• Do not remove the SD Memory Card or turn off the power while the card is being accessed. This may cause the data to be lost or the card to be damaged.

• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from water and store away from high temperatures.

• Do not remove the SD Memory Card while formatting. The card may be damaged and become unusable.

• Data on the SD Memory Card may be deleted in the following circumstances. We do not accept any liability for data that is deleted if

1.the SD Memory Card is mishandled by the user.

2.the SD Memory Card is exposed to static electricity or electrical interference.

3.the SD Memory Card has not been used for a long time.

4.the SD Memory Card or the battery is removed while the card is being accessed.

• If the SD Memory Card is not used for a long time, the data on the card may become unreadable. Be sure to regularly make a backup of important data on a computer.

• Format new SD Memory Cards. Also format SD Memory Cards previously used with other cameras.

• Please note that deleting data stored on an SD Memory Card, or formatting an SD Memory Card does not completely erase the original data. Deleted data can sometimes be recovered using commercially available software. If you are going to discard, give away or sell your SD

Memory Card, you should ensure that the data on the card is completely deleted or the card itself is destroyed if it contains any personal or sensitive information.

• The data on your SD Memory Card should be managed at your own risk.

About Eye-Fi Cards

• An SD Memory Card with a built-in wireless LAN (“Eye-Fi card”) can be used with this camera.

• Use of an access point and an Internet connection are required for transferring images via wireless LAN. For details, refer to the Eye-Fi website. (http://www.eye.fi)

• Update your Eye-Fi card to the latest firmware before using it.

• Set [Action Mode] to [OFF], or do not use an Eye-Fi card in a location where the use of wireless LAN devices is restricted or prohibited, such as airplanes.

• Eye-Fi cards can be used only in the country in which the card was purchased. Please observe all local laws governing the Eye-Fi card usage.

• This camera features a function to enable/disable the communication function of the Eye-Fi card, however, we do not guarantee the operability of all Eye-Fi card functions.

• Refer to the Eye-Fi card manual for details on how to use the card.

• Please contact the Eye-Fi card manufacturer regarding any malfunctions or problems concerning Eye-Fi cards.

Trademarks

Microsoft, Windows and Windows Vista are registered trademarks of

Microsoft Corporation in the United States of America and other countries.

Macintosh, Mac OS, OS X, and QuickTime are trademarks of Apple Inc., registered in the U.S. and other countries.

Intel and Intel Core are trademarks of Intel Corporation in the U.S. and/or other countries.

SDXC Logo is a trademark of SD-3C, LLC.

Eye-Fi, the Eye-Fi logo and Eye-Fi connected are trademarks of Eye-Fi,

Inc.

This product includes DNG technology under license by Adobe Systems

Incorporated.

The DNG logo is either a registered trademark or trademark of Adobe

Systems Incorporated in the United States and/or other countries.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United

States and/or other countries.

All other trademarks are the property of their respective owners.

This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not PRINT Image Matching III compliant.

Image Matching is a trademark of Seiko Epson Corporation. The PRINT

Image Matching logo is a trademark of Seiko Epson Corporation.

AVC Patent Portfolio License

This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC standard

(“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use.

Additional information may be obtained from MPEG LA, L.L.C.

See http://www.mpegla.com.

Announcement on the Use of BSD-Licensed Software

This product includes software licensed under the BSD License. BSD license is a form of license which permits the redistribution of the software provided that it is clearly stated that use is unwarranted, and a copyright notice and a list of licensing conditions are provided. The following contents are displayed based on the abovementioned licensing conditions and are not for the purpose of restricting your use of the product, etc.

Tera Term

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR “AS IS” AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN

NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY

OF SUCH DAMAGE.

WARRANTY POLICY

All our cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from the date of your purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the camera does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by non-authorized service facilities.

Procedure During 12-month Warranty Period

Any camera which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the camera or to the manufacturer. If there are no representatives of the manufacturer in your country, send the camera to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the camera can be returned to you owing to the complicated customs procedures required. If the camera is covered by warranty, repairs will be made and parts replaced free of charge, and the camera will be returned to you upon completion of servicing. If the camera is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner. If your camera was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that country. Notwithstanding this, your camera returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your camera for at least a year. Before sending your camera for servicing, please make sure that you are sending it to the manufacturer’s authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.

• This warranty policy does not affect the customer’s statutory rights.

• The local warranty policies available from our distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact our distributor in your country for more information and to receive a copy of the warranty policy.

For customers in USA

STATEMENT OF FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

* Consult the dealer or an experienced radio/TV technician for help.

For customers in Canada

This Class B digital apparatus complies with Canadian ICES-

003.

Pour les utilisateurs au Canada

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

FOR CALIFORNIA, U.S.A. ONLY

Perchlorate Material-special handling may apply.

The lithium battery used in this camera contains perchlorate material, which may require special handling.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

Declaration of Conformity

According to 47CFR, Parts 2 and 15 for

Class B Personal Computers and Peripherals

We: RICOH IMAGING AMERICAS

CORPORATION

Located at:

Denver, Colorado 80202 U.S.A.

Phone: 800-877-0155

FAX: 303-790-1131

Declare under sole responsibility that the product identified herein complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.

Product Name:

Model Number:

Contact person:

Date and Place:

SLR Digital Camera

PENTAX K-S1

Customer Service Manager

August, 2014, Colorado

Information for Users on Collection and Disposal of

Old Equipment and Used Batteries

1. In the European Union

These symbols on the products, packaging and/ or accompanying documents mean that used electrical and electronic equipment and batteries should not be mixed with general household waste.

Used electrical/electronic equipment and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.

By disposing of these products correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.

If a chemical symbol is added beneath the symbol shown above, in accordance with the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in the battery at a concentration above an applicable threshold specified in the Battery Directive.

For more information about collection and recycling of used products, please contact your local authorities, your waste disposal service or the point of sale where you purchased the products.

2. In other countries outside the EU

These symbols are only valid in the European Union. If you wish to discard used products, please contact your local authorities or dealer and ask for the correct method of disposal.

For Switzerland: Used electrical/electronic equipment can be returned free of charge to the dealer, even when you don’t purchase a new product. Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch.

Information on the Operating

Manual

An Operating Manual (PDF) containing information on how to use this camera is available. Please download it from our website. A printed version can also be purchased upon request.

Please contact your nearest service center.

Operating Manual Download: http://www.ricoh-imaging.com/ manuals/

The CE Mark is a Directive conformity mark of the

European Union.

Memo