PENTAX X70 Digital Camera Operating Manual

Digital Camera
Operating Manual
To ensure the best performance from your camera, please
read the Operating Manual before using the camera.
Thank you for purchasing this PENTAX Digital Camera.
Please read this manual before using the camera in order to get the most
out of all the features and functions. Keep this manual safe, as it can be
a valuable tool in helping you to understand all the camera capabilities.
Regarding copyrights
Images taken using the PENTAX Digital Camera that are for anything other than
personal enjoyment cannot be used without permission according to the rights as
specified in the Copyright Act. Please take care, as there are cases where
limitations are placed on taking pictures even for personal enjoyment during
demonstrations, performances or of items on display. Images taken with the
purpose of obtaining copyrights also cannot be used outside the scope of use of
the copyright as laid out in the Copyright Act, and care should be taken here also.
Regarding trademarks
• PENTAX is a trademark of HOYA CORPORATION.
• SDHC logo (
) is a trademark.
• 2008 ACD Systems Ltd. All rights reserved. ACDSee and the ACDSee logo
are trademarks of ACD Systems Ltd. in Canada, the U.S., Europe, Japan and
other countries.
• Microsoft and Windows are registered trademarks of Microsoft Corporation in
the United States and other countries. Windows Vista is either a registered
trademark or trademark of Microsoft Corporation in the United States and/or
other countries.
• Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and
other countries.
• This product supports PRINT Image Matching III. PRINT Image Matching
enabled digital still cameras, printers and software help photographers to
produce images more faithful to their intentions. Some functions are not
available on printers that are not PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation. The PRINT
Image Matching logo is a trademark of Seiko Epson Corporation.
• All other brands or product names are trademarks or registered trademarks of
their respective companies.
Regarding Product Registration
In order to better serve you, we request that you complete the product
registration, which can be found on the CD-ROM supplied with the camera or the
PENTAX website. Thank you for your cooperation.
Refer to “Connecting to a Computer” (p.217) for more information.
To users of this camera
• Do not use or store this device in the vicinity of equipment that generates strong
electromagnetic radiation or magnetic fields.
Strong static charges or the magnetic fields produced by equipment such as
radio transmitters could interfere with the monitor, damage the stored data, or
affect the product's internal circuitry and cause camera misoperation.
• The liquid crystal panel used in the display is manufactured using extremely
high precision technology. Although the level of functioning pixels is 99.99% or
better, you should be aware that 0.01% or fewer of the pixels may not illuminate
or may illuminate when they should not. However, this has no effect on the
recorded image.
• There is a possibility that the illustrations and the display screen in this manual
are different from the actual product.
• In this manual, both an SD Memory Card and an SDHC Memory Card are
referred to as SD Memory Cards hereafter.
• In this manual, the generic term “computer(s)” refers to either a Windows PC or
a Macintosh hereafter.
USING YOUR CAMERA SAFELY
We have paid close attention to the safety of this product. When using
this product, we request your special attention regarding items marked
with the following symbols.
Warning This symbol indicates that violating this item could
cause serious personal injuries.
Caution
This symbol indicates that violating this item could
cause minor or medium personal injuries, or material
losses.
1
About the Camera
Warning
• Do not attempt to take the camera apart or remodel the camera. High
voltages are present within the camera, and there is therefore a danger of
electric shocks if the camera is taken apart.
• If the inside of the camera should become exposed as a result of, for
example, the camera being dropped, please do not under any
circumstances touch such exposed portions, as there is a danger of
receiving an electric shock.
• To avoid the risk of it being swallowed by mistake, keep the SD Memory
Card out of the reach of small children. Seek medical attention immediately
if a card is accidentally swallowed.
• Wrapping the strap of the camera around your neck is also dangerous.
Please take care that small children do not hang the strap around their
necks.
• Use an AC adapter that is of the power and voltage specified for exclusive
use with this product. The use of an AC adapter other than that specified
exclusively for use with this product may cause fire or electric shocks.
• If the camera emits smoke or a strange smell, or in the event of any other
irregularity, stop using the camera immediately, remove the battery and
contact your nearest PENTAX Service Center. Continued use of the
camera may result in fire or electric shock.
2
Caution
• Do not place your finger on the flash when it is discharging as there is a
risk of burns.
• Do not discharge the flash while it is touching your clothing as there is a
risk of discoloring.
• If any leakage from the battery should come in contact with your eyes, it
may cause a loss of sight. Flush your eyes with clean water and get
medical attention immediately. Do not rub them.
• If any leakage from the battery should come in contact with skin or clothes,
it may cause irritation to the skin. Wash the affected areas thoroughly with
water.
• Precautions for D-LI92 Battery Usage:
BATTERY MAY EXPLODE OR FIRE IF MISTREATED.
- DO NOT DISASSEMBLE OR DISPOSE OF IN FIRE.
- DO NOT CHARGE EXCEPT SPECIFIED CHARGING CONDITION.
- DO NOT HEAT ABOVE 140°F / 60°C, OR SHORT CIRCUIT.
- DO NOT CRUSH OR MODIFY.
• Remove the battery from the camera immediately if it becomes hot or
begins to smoke. Be careful not to burn yourself during removal.
• Some portions of the camera heat up during use, so please take care, as
there is a risk of low temperature burns if such portions are held for long
periods of time.
• Should the LCD be damaged, be careful of glass fragments. Also, be
careful not to allow the liquid crystal to get on your skin or in your eyes or
in your mouth.
• Depending on your inherent factors or physical condition, the use of the
camera may cause itching, rashes or blisters. In case of any abnormality,
stop using the camera and get medical attention immediately.
3
About the Battery Charger and the AC Adapter
Warning
• Do not use the product at a voltage other than the specified voltage. Use
with a power source or voltage other than that designated can cause a fire
or electrical shock. The specified voltage is 100-240V AC.
• Do not disassemble or modify the product. This can cause a fire or
electrical shock.
• If the generation of smoke or strange odor from the product or other
abnormality occurs, immediately discontinue using and consult a PENTAX
Service Center. Continuing to use the product can cause a fire or electrical
shock.
• If water should happen to get inside the product, consult a PENTAX
Service Center. Continuing to use the product can cause a fire or electrical
shock.
• If a thunder storm should be present during use of the battery charger or
AC adapter, unplug the power cord and discontinue use. Continuing to use
the product can cause damage to the equipment, fire or electrical shock.
• Wipe off the plug of the power cord if it should become covered with dust.
This can cause a fire.
Caution
• Do not place heavy objects on the AC plug cord, allow heavy objects to
drop onto it or allow the AC plug cord to become damaged due to
excessive bending. If the AC plug cord becomes damaged, consult a
PENTAX Service Center.
• Do not short or touch the output terminals of the product while it is still
plugged in.
• Do not plug in the AC plug cord with wet hands. This can cause an
electrical shock.
• Do not subject the product to strong impacts or allow it to drop onto a hard
surface. This can cause a malfunction.
• Do not use the battery charger to charge batteries other than rechargeable
lithium-ion battery D-LI92. This can cause overheating, explosion or
battery charger failure.
4
• To reduce the risk of hazards, use only CSA/UL Certified power supply
cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper,
one end with a molded-on male attachment plug cap (with a specified
NEMA configuration), and the other is provided with a molded-on female
connector body (with a specified IEC nonindustrial type configuration) or
the equivalent.
Care to be Taken During Handling
• When traveling, take the Worldwide Service Network listing that is included
in the package. This will be useful if you experience problems abroad.
• When the camera has not been used for a long time, confirm that it is still
working properly, particularly prior to taking important pictures (such as at
a wedding or during traveling). Contents of the recording cannot be
guaranteed if recording, playback or transferring your data to a computer,
etc. is not possible due to a malfunction of your camera or recording media
(SD Memory Card), etc.
• The lens on this camera is not interchangeable. The lens is not removable.
• Do not clean the product with organic solvents such as thinner, alcohol or
benzene.
• Places of high temperature and humidity should be avoided. Particular
care should be taken regarding vehicles, which can become very hot
inside.
• This camera is not waterproof. Do not use this camera where it might come
in contact with rain, water, or any other liquid.
• Storing the camera where pesticides and chemicals are handled should be
avoided. Remove the camera from its case and store in a well-ventilated
place to prevent the camera from becoming moldy during storage.
• Ensure that the camera is not subjected to substantial vibrations, shocks
or pressure as this may cause damage or malfunction. Place the camera
on a cushion for protection when the camera is subjected to the vibrations
of a motorbike, car, ship, etc. If the camera is subjected to substantial
vibrations, shocks or pressure, take your camera to your nearest PENTAX
Service Center and have it checked.
• The temperature range in which the camera can be used is 0°C to 40°C
(32°F to 104°F).
• The liquid crystal display will become black at a high temperature but will
return to normal when normal temperatures are returned to.
5
• The response speed of the liquid crystal display becomes slow at low
temperatures. This is due to the properties of the liquid crystal and is not
a fault.
• Periodic checks are recommended every 1 to 2 years in order to maintain
high performance.
• If the camera is subjected to rapid temperature changes, condensation
may form on the inside and outside of the camera. Therefore put the
camera in a bag or plastic bag, and take the camera out when the
difference in temperature has subsided.
• Refer to “Precautions When Using an SD Memory Card” (p.36) regarding
the SD Memory Card.
• Please note that formatting an SD Memory Card or the built-in memory will
delete all data; however it may still be possible to recover that data using
off-the-shelf data recovery software. Please manage your camera memory
at your own risk.
• Please do not press forcefully on the display. This could cause breakage
or malfunction.
• When using a tripod with the camera, be careful not to overtighten
the screw in the tripod socket on the camera.
• The AC plug cord supplied with the camera is for exclusive use with the
battery charger D-BC92. Do not use it with any other equipment.
• Storing the battery fully charged may decrease the battery performance.
Avoid storing it especially in high temperatures.
If the battery is left inserted and the camera is not used for a long time, the
battery will over-discharge and shorten the battery’s service life.
• Charging the battery a day before use or on the day of use is
recommended.
• Do not hold or force the extended part of the lens. This can cause a
malfunction.
6
Contents
USING YOUR CAMERA SAFELY....................................................1
Care to be Taken During Handling ...................................................5
Contents ...........................................................................................7
Composition of the Operating Manual ............................................ 13
Camera Features................................................................................. 14
Checking the Contents of the Package .......................................... 17
Names of Parts............................................................................... 18
Names of Operating Parts .............................................................. 19
Monitor Indications ......................................................................... 20
Getting Started
27
Attaching the Lens Cap and Strap .................................................... 28
Powering the Camera ......................................................................... 29
Charging the Battery....................................................................... 29
Installing the Battery ....................................................................... 30
Using the AC Adapter..................................................................... 33
Installing the SD Memory Card.......................................................... 34
Number of Images Recordable on an SD Memory Card................ 37
Turning the Camera On and Off ........................................................ 38
Starting-up in the Playback Mode...................................................39
Initial Settings .....................................................................................40
Setting the Display Language.........................................................40
Setting the Date and Time.............................................................. 44
Common Operations
47
Understanding the Button Functions ...............................................48
A Mode .........................................................................................48
Q Mode ........................................................................................ 50
Switching Between A Mode and Q Mode................................... 52
Setting the Camera Functions ........................................................... 53
Operating the Menus ......................................................................53
Menu List ........................................................................................ 57
Taking Pictures
61
Taking Still Pictures............................................................................62
Holding the Camera........................................................................62
Taking Pictures............................................................................... 63
Selecting the Appropriate Capture Mode ......................................... 68
7
Picture Mode .................................................................................. 69
H Mode .......................................................................................69
Exposure Mode ..............................................................................71
Using the Face Recognition Function.............................................78
Taking Pictures in the Basic Mode (Green Mode)..........................80
Using the Zoom ..............................................................................82
Taking Pictures of Dark Scenes
(Night Scene/Night Scene Portrait/Digital SR/Fireworks) ........ 85
Taking Pictures of People (Half-length Portrait/ Portrait Mode)...... 86
Taking Pictures of Children (Kids Mode) ........................................ 88
Taking Pictures of Your Pet (Pet Mode) ......................................... 89
Taking Pictures of Sports and Leisure Activities
(Surf & Snow/Sport Mode) .......................................................90
Taking Pictures Indoors (Party Mode) ............................................ 92
Framing Your Pictures (Frame Composite Mode) ..........................93
Using the Self-timer ........................................................................95
Taking a Series of Pictures (Continuous Shooting Mode).............. 97
Taking Pictures at a Set Interval (Interval Shoot) ........................... 98
Taking Pictures with Automatic Exposure Adjustment
(Auto Bracket) ........................................................................101
Using the Digital Wide Function (Digital Wide Mode)................... 102
Taking Panoramic Pictures (Digital Panorama Mode).................. 104
Setting the Exposure ........................................................................107
Effect of Aperture and Shutter Speed...........................................107
Setting the Exposure (EV Compensation).................................... 108
Setting the Shooting Functions.......................................................110
Selecting the Flash Mode ............................................................. 110
Selecting the Focus Mode ............................................................ 113
AF Area Selection......................................................................... 115
Selecting the Autofocus Settings.................................................. 116
Setting the Image Tone ................................................................119
Selecting the Recorded Pixels...................................................... 120
Selecting the Quality Level of Still Pictures ..................................122
Adjusting the White Balance......................................................... 123
Setting the Sensitivity ................................................................... 125
Setting ISO Correction in AUTO ...................................................127
Setting the AE Metering................................................................128
Compensating for Flash Output.................................................... 129
Compensating for Brightness .......................................................130
Taking Pictures Using the Shake Reduction Function ................. 131
Setting the Shake Reduction ........................................................ 132
Setting the Interval Shooting ........................................................ 133
Setting Blink Detection ................................................................. 135
Setting the Instant Review............................................................ 135
8
Setting the Image Sharpness (Sharpness)................................... 136
Setting the Color Saturation/Tone
(Saturation/Tone Adjustment) ................................................ 137
Setting the Image Contrast (Contrast).......................................... 138
Setting the Date Imprint Function .................................................139
Setting the Green Button ..............................................................140
Recording Movies ............................................................................. 143
Recording a Movie........................................................................143
Selecting the Recorded Pixels and Frame Rate for Movies .........145
Setting the Movie SR (Movie Shake Reduction) Function............ 146
Saving the Settings (Memory) ......................................................... 147
Playing Back and Deleting Images
149
Playing Back Images ........................................................................150
Playing Back Still Pictures ............................................................ 150
Playing Back a Movie ................................................................... 151
Multi-Image Display ......................................................................152
Using the Playback Function ........................................................ 155
Slideshow .....................................................................................158
Rotating the Image ....................................................................... 160
Zoom Playback............................................................................. 161
Zoom In on the Subject’s Face Automatically
(Face Close-up Playback)...................................................... 162
Deleting Images and Sound Files.................................................... 164
Deleting a Single Image ............................................................... 164
Deleting Selected Images and Sound Files..................................166
Deleting All Images and Sound Files............................................ 168
Recovering Deleted Images ......................................................... 169
Protecting Images and Sound Files from Deletion (Protect) ........ 170
Connecting the Camera to AV Equipment...................................... 173
Editing and Printing Images
175
Editing Images .................................................................................. 176
Changing the Image Size (Resize)...............................................176
Cropping Images ..........................................................................177
Using the Digital Filters................................................................. 178
Red-eye Compensation................................................................182
Adding a Frame (Frame Composite) ............................................ 183
Editing Movies .............................................................................. 186
Copying Images and Sound Files.................................................188
Setting the Printing Service (DPOF)................................................ 190
Printing a Single Image ................................................................190
9
Printing All Images........................................................................192
Recording and Playing Back Sound
193
Adding a Voice Memo to Images.....................................................194
Recording a Voice Memo ............................................................. 194
Playing Back a Voice Memo......................................................... 195
Settings
197
Camera Settings................................................................................ 198
Formatting an SD Memory Card...................................................198
Saving A Mode ........................................................................199
Changing the Sound Settings.......................................................200
Changing the Date and Time........................................................ 201
Setting the World Time ................................................................. 204
Changing the Display Language .................................................. 206
Changing the Naming Rule of the Folder ..................................... 207
Changing the Video Output Format.............................................. 208
Adjusting the Brightness of the Display ........................................ 209
Using the Power Saving Function ................................................ 210
Setting Auto Power Off ................................................................. 211
Setting the Quick Zoom Function .................................................212
Setting the Guide Display ............................................................. 213
Changing the Start-up Screen ...................................................... 213
Resetting to Default Settings (Reset) ...........................................215
Connecting to a Computer
217
Setting Up Your Computer............................................................... 218
Provided Software ........................................................................218
System Requirements ..................................................................219
Installing the Software ..................................................................220
Setting the USB Connection Mode...............................................224
Connecting to a Windows PC .......................................................... 226
Connecting the Camera and a Windows PC ................................226
Transferring Images ..................................................................... 227
Disconnecting the Camera from Your Windows PC..................... 230
Starting “ACDSee for PENTAX 3.0” .............................................231
Viewing Images ............................................................................232
Details on How to Use “ACDSee for PENTAX 3.0” ......................233
Connecting to a Macintosh ..............................................................234
Connecting the Camera and a Macintosh .................................... 234
Transferring Images ..................................................................... 235
10
Disconnecting the Camera from Your Macintosh ......................... 235
Starting “ACDSee 2 for Mac”........................................................ 236
Viewing Images ............................................................................237
Details on How to Use “ACDSee 2 for Mac”................................. 237
Appendix
239
Functions Available for Each Shooting Mode................................240
Messages...........................................................................................245
Troubleshooting................................................................................ 247
Default Settings................................................................................. 249
List of World Time Cities..................................................................254
Optional Accessories ....................................................................... 255
Main Specifications ..........................................................................256
WARRANTY POLICY......................................................................... 260
Index................................................................................................... 265
11
In this manual, the method for operating the four-way controller is shown
in illustrations, such as in the one below.
2or
4or
5or
3or
The meanings of the symbols used in this Operating Manual are
explained below.
1
indicates the reference page number for an explanation of the
related operation.
indicates information that is useful to know.
indicates precautions to be taken when operating the camera.
12
A mode
This is the mode for capturing still pictures and recording movies.
In this manual, the mode for taking still pictures is referred to as
the “Still Picture Capture Mode” and the mode for recording
movies is referred to as the “C mode”.
Q mode
This is the mode for viewing still pictures and playing back movies
and sound files.
Composition of the Operating Manual
This Operating Manual contains the following chapters.
1 Getting Started –––––––––––––––––––––––––––––––––––––––––
This chapter explains what you need to do after purchasing the camera
before you start taking pictures. Be sure to read it and follow the
instructions.
2 Common Operations ––––––––––––––––––––––––––––––––––––
This chapter explains common operations such as the functions of the
buttons and how to use the menus. For more details, refer to the respective
chapters below.
1
2
3
3 Taking Pictures ––––––––––––––––––––––––––––––––––––––––
This chapter explains the various ways of capturing images and how to set
the relevant functions.
4 Playing Back and Deleting Images–––––––––––––––––––––––––
This chapter explains how to view still pictures and movies on the camera
or on TV and how to delete images, sound files, and movies from the
camera.
5 Editing and Printing Images ––––––––––––––––––––––––––––––
This chapter explains the various ways of printing still pictures and how to
edit images with the camera.
6 Recording and Playing Back Sound –––––––––––––––––––––––
This chapter explains how to add sound (a voice memo) to an image, and
how to play back sound files.
7 Settings –––––––––––––––––––––––––––––––––––––––––––––––
4
5
6
7
8
This chapter explains how to set the camera-related functions.
8 Connecting to a Computer –––––––––––––––––––––––––––––––
9
This chapter explains how to connect the camera to a computer, and
includes installation instructions and a general overview of the provided
software.
9 Appendix––––––––––––––––––––––––––––––––––––––––––––––
This chapter deals with troubleshooting and lists the optional accessories.
13
Camera Features
In addition to basic picture-taking, the X70 has a variety of shooting modes
to suit different situations. This section describes how to make the most of
the key features of your camera. Together with the explanations of camera
operations, it will enable you to enjoy your camera to the full.
Easy-to-Navigate Capture and Playback
Functions!
The user-friendly design of the X70
enables easy operation with only a few
buttons. Simply by choosing the
appropriate icon, you can select the
shooting mode (p.68) and choose the
optimal settings for the situation, or the
playback mode (p.155, p.176) and
enjoy the various playback and editing
functions. A guide on the display lets
you check the functions available in
each mode and how to use them.
A shooting mode guide is displayed in the Capture Mode
Palette and a playback mode guide in the Playback Mode
Palette (p.69, p.155).
Use the Green Mode to take pictures easily using
standard settings (p.80).
14
Perfect for Portrait Shots!
The X70 comes with a “Face Recognition” function that spots the faces
in your shot and automatically adjusts the focus and exposure for the
faces. It can recognize up to 32 people per shot (*), so it will help you
take perfect group shots too. It will automatically release the shutter
when people are smiling, or if anyone blinked, it will tell you that so you
can take the shot again until it is perfect. It also has a feature that lets
you enlarge each person's face in sequence during playback so you can
quickly check their facial expressions.
* Up to 15 face recognition frames are displayed on the monitor.
Face Recognition function (p.78)
Modes for taking stunning pictures of people (p.86)
Close-ups of people's faces for easy checking during
playback (p.162)
Add Various Frames to Your Pictures!
When you take a picture with the X70, you
can choose from a wide range of fun
frames to create attractive framed shots
(p.93). You can also add frames to
pictures you have taken. Adjust the
position of the subject in the picture or
reduce or enlarge the picture size to
match the frame shape and size. Now you
no longer have to worry about the subject
not fitting into the frame (p.183).
For decorating your pictures
with a frame
Display Images and Sound Files in Calendar
Format!
With the X70, you can display recorded images by date in calendar
format (p.154). This lets you quickly find the image you want to play
back.
15
Advanced Movie Recording Functions
The X70 has a Shake Reduction function to reduce camera shake during
movie recording (p.146). It also supports the 1280×720 HDTV image
format so you can view your recordings as stunning wide-screen movies.
Use the camera to shoot fun-filled movies of your
children or pets as a visual diary of their development
(p.143).
A multitude of functions inside the camera for
enjoying images without a Computer!
The X70 has a variety of functions
to let you enjoy playing back and
editing images without having to
connect the camera to your
computer and transfer the images
first. The camera is all you need
to take and edit still pictures and
movies (p.176). And no more
worries about accidentally
deleting images, because now,
with the X70, you can recover
them again (p.169).
Resize (p.176), Cropping (p.177) and Red-eye
Compensation (p.182) can be used, while the image is
displayed in the playback mode.
You can divide a movie into two or select a frame from a
movie to save it as a still picture (p.186).
16
Checking the Contents of the Package
Camera
X70
Strap
O-ST92 (*)
Lens cap O-LC92 (*)
(Cap installed on camera)
Software (CD-ROM)
S-SW87
USB cable
I-USB7 (*)
AV cable
I-AVC7 (*)
Rechargeable lithium-ion
battery D-LI92 (*)
Battery charger
D-BC92 (*)
AC plug cord (*)
Quick Guide
Operating Manual
(this manual)
Items marked with an asterisk (*) are also available as optional accessories.
The battery charger and AC plug cord are only sold as a set (Battery Charger Kit
K-BC92).
For other optional accessories, refer to “Optional Accessories” (p.255).
17
Names of Parts
Front
Self-timer lamp
Strap lug
b button
Lens
Back
Flash (stored)
Mode dial
Zoom lever
Shutter release button
Strap lug
Power switch/Power lamp
m button
Display
Viewfinder
18
Bottom
Tripod socket
Battery/Card cover
lock lever
Battery/Card cover
Names of Operating Parts
EVF/LCD button
W button
e-dial
I button
Q button
Four-way controller
4 button
Green/i button
3 button
Refer to “Understanding the Button Functions” (p.48 - p.51) for an
explanation of the function of each button.
19
Monitor Indications
Display in A Mode
The display shows information such as the shooting conditions in the
capture mode. The display changes in the following sequence each time
you press the W button: “Normal Display”, “Histogram + Info”,
“Grid Display” and “No Info”.
Normal Display
Histogram + Info
38
38
12 M
DISP
200
04/02/2009
14:25
DISP
DISP
DISP
No Info
• When the shooting mode is set to 9
(Green) mode, the monitor display is as
shown on the right. You cannot change the
information on the display by pressing the
W button.
Grid Display
38
• To take pictures using the viewfinder, switch from the display to the
viewfinder by pressing the ELV/LCD button. Press the button again to
switch to the display.
20
Normal Display in Still Picture Capture Mode
7 8
9
38
1
2
3
10
11
12
13
14
4
5
6
1/250
F3.5
+1.0
16
1 Shooting mode (p.68)
2 Face Priority icon (p.78)
3 Bright area adjustment icon
(p.130)
4 Shake Reduction icon (p.132)
5 Shutter speed
6 Aperture
7 Flash Mode (p.110)
8 Drive Mode (p.95 - p.101)
9 Focus Mode (p.113)
10 Digital Zoom/Intelligent Zoom
icon (p.82)
04/02/2009
14:25
15
17 18
11 Memory status (p.38)
12 Remaining image storage
capacity
13 Battery level indicator (p.32)
14 Focus frame (p.64)
15 Date and time (p.44)
16 EV Compensation (p.108)
17 Date Imprint setting (p.139)
18 World Time setting (p.204)
* For 4, M appears if the shutter release button is pressed halfway
when [Shake Reduction] in the [A Rec. Mode] menu is set to [On].
l appears when [Shake Reduction] is set to [Off].
* 5 and 6 always appear in e, b, c, a, and E modes. In other
shooting modes, they are displayed only when the shutter release
button is pressed half-way.
* For 9, when the focus mode is set to = and the Auto-Macro function
is activated, the q appears on the display (p.113).
* Some indications may not appear depending on the shooting mode.
21
Histogram + Info/Grid Display/No Info Display in Still Picture Capture Mode
A1 to A17 and B1 appear when “Histogram + Info” is selected. Only B1
appears when “Grid Display” or “No Info” is selected.
A5 A6 A7 A8 A9
38
A1
A2
A3
12 M
B1
A4
B2
B3
200
1/250
F3.5
A17
+1.0
A18
A10
A11
A12
A13
A14
A15
A16
A19
Shooting mode (p.68)
A12 Recorded pixels (p.120)
Face Priority icon (p.78)
A13 Quality Level (p.122)
Bright area adjustment icon (p.130)A14 White Balance (p.123)
Shake Reduction icon (p.132)
A15 AE Metering (p.128)
Flash Mode (p.110)
A16 Sensitivity (p.125)
Drive Mode (p.95 - p.101)
A17 Histogram (p.25)
Focus Mode (p.113)
A18 EV Compensation (p.108)
Digital Zoom/
A19 Date Imprint setting (p.139)
Intelligent Zoom icon (p.82)
B1 Focus frame (p.64)
A9 Memory status (p.38)
B2 Shutter speed
A10 Remaining image storage capacity B3 Aperture
A11 Battery level indicator (p.32)
A1
A2
A3
A4
A5
A6
A7
A8
* For A4, M appears if the shutter release button is pressed halfway
when [Shake Reduction] in the [A Rec. Mode] menu is set to [On].
l appears when [Shake Reduction] is set to [Off].
* B2 and B3 always appear in e, b, c, a, and E modes. In other
shooting modes, they are displayed only when the shutter release
button is pressed half-way.
* When the shooting mode is I (Auto Picture) and if you press the
shutter release button halfway, the automatically selected shooting mode
appears in A1 even when “Grid Display” or “No Info” is selected (p.63).
* Some indications may not appear depending on the shooting mode.
22
Display in Q Mode
The display shows the shooting information of the image in the playback
mode. The display changes in the following sequence each time you
press the W button: “Normal Display”, “Histogram + Info” and
“No Info”.
Normal Display
100 - 0038
Edit
Ed
04/02/2009
14:25
DISP
Histogram + Info
100 - 0038
12 M
DISP
200
1/250
F3.5
Edit
Ed
04/02/2009
14:25
DISP
No Info
Ed
Edit
23
Normal Display/Histogram + Info Display in Playback Mode
(All of the display items are displayed here for explanatory purposes.)
The display shows information such as the shooting conditions. A1 to
A11 appear when “Normal Display” or “Histogram + Info” is selected. B1
to B8 appear only when “Histogram + Info” is selected.
A3
A2
A1
B1
B2
B3
B4
B5
B6
B7
100 - 0038
12 M
200
1/250
F3.5
A1 Playback mode
Q : Still Picture (p.150)
K : Movie (p.151)
A2 Face Priority icon (p.78)
A3 Memory status (p.38)
A4 Folder number (p.207)
A5 File number
A6 Protect icon (p.170)
A7 Voice memo icon (p.195)
A8 Battery level indicator (p.32)
A9 Volume icon
A4
A5
A6
A7
A8
A9
B8
Edit
04/02/2009
14:25
A10
A11
A10 Captured date and time (p.44)
A11 Four-way controller guide
B1 Recorded pixels (p.120)
B2 Quality Level (p.122)
B3 White Balance (p.123)
B4 AE Metering (p.128)
B5 Sensitivity (p.125)
B6 Shutter speed
B7 Aperture
B8 Histogram (p.25)
* A2 appears only if the Face Recognition function worked when the
image was shot.
* In “Normal Display”, A8 and A10 disappear if no operation is performed
for two seconds.
* A9 appears only when the volume is being adjusted during playback of
movies or voice memo. (p.151, p.195)
* A11 appears even when “No Info” is selected, but disappears if no operation
is performed for two seconds. When no operation is performed for two seconds
in “Normal Display” or “Histogram + Info”, only “Edit” disappears.
24
Guide Indications
A guide for each available button operation appears as follows on the
display during operation.
Four-way controller (2)
Four-way controller (3)
Four-way controller (4)
Four-way controller (5)
2
3
4
5
MENU
/
3 button
e-dial
SHUTTER
4 button
Shutter release button
X, i
I, J
Green/i button
I button
OK
Using the Histogram
Number of pixels→
A histogram shows the
brightness distribution of an
image. The horizontal axis
represents brightness (dark at
the left and bright at the right)
and the vertical axis represents
the number of pixels.
The shape of the histogram
(Dark) ←Brightness→ (Bright)
before and after shooting tells
Dark portions
Bright portions
you whether the brightness and
contrast are correct or not, and lets you decide if you need to use EV
compensation and take the picture again.
Setting the Exposure (EV Compensation) 1p.108
Understanding Brightness
If the brightness is correct, the graph peaks in the middle. If the image is
too dark, the peak is on the left side, and if it is too bright, the peak is on
the right side.
Dark image
Correct image
Bright image
25
When the image is too dark, the part to the left is cut off (dark portions)
and when the image is too bright, the part to the right is cut off (bright
portions).
Understanding Contrast
The graph peaks gradually for images in which contrast is balanced. The
graph peaks on both sides but sinks in the middle for images with a large
difference in contrast and low amounts of mid-level brightness.
26
1
Getting Started
Attaching the Lens Cap and Strap .......... 28
Powering the Camera ............................... 29
Installing the SD Memory Card ................ 34
Turning the Camera On and Off .............. 38
Initial Settings ........................................... 40
Attaching the Lens Cap and Strap
Attach the lens cap (O-LC92) and strap (O-ST92) supplied with the camera.
1
Getting Started
1
2
Attach the string
provided to the lens cap.
Pass the end of the strap through the strap lug, then
secure it on the inside of the clasp.
As shown in the bottom-left illustration, passing the strap through the lens
cap's string prevents the lens cap from being lost.
Pass the other end of the strap through the other strap
lug on the camera, then secure it on the inside of the
clasp (bottom-right illustration).
28
Powering the Camera
Charging the Battery
1
Getting Started
Use the supplied battery charger (D-BC92) to charge the supplied
rechargeable lithium-ion battery (D-LI92) before using it in the camera
for the first time or after a long period of non-use, or when the [Battery
depleted] message appears.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord,
rated 125 V, 7A, minimum 6ft (1.8m)”
Charging indicator
While charging: Lights
Charging finished: Turns off
3
2
To power outlet
Battery
1
Battery charger
1
2
3
AC plug cord
Connect the AC plug cord to the battery charger.
Plug the AC plug cord into the power outlet.
Place the battery in the battery charger so that the
PENTAX logo is facing up.
The charging indicator lights while the battery is charging and turns off
when charging is finished.
4
Remove the battery from the battery charger when
charging is finished.
29
• Do not use the supplied battery charger (D-BC92) to charge batteries
other than the rechargeable lithium-ion battery D-LI92, as the battery
charger may overheat or be damaged.
• The battery has reached the end of its service life when it starts to run
down soon after being charged. Replace with a new battery.
• If the battery is inserted correctly but the charging indicator fails to
light, the battery may be faulty. Replace with a new battery.
1
Getting Started
The time required to fully charge the battery is about 120 minutes (max.).
(The charging time may vary depending on the ambient temperature and
charging conditions.) The appropriate ambient temperature for charging
the battery is 0°C to 40°C (32°F to 104°F).
Installing the Battery
Use the rechargeable lithium-ion battery D-LI92 that is provided with the
camera. Charge the battery before using it in the camera for the first time.
Battery/Card cover
lock lever
Battery
lock lever
Battery/
Card cover
1
Open the battery/card cover.
Slide the battery/card cover lock lever in the direction of the arrow to
open the cover (1).
30
2
Press the battery lock lever in the direction of (2) and
insert the battery so that the PENTAX logo is facing
toward the screen display.
Make sure that the battery is inserted with the PENTAX logo pointing
toward the screen display. If the battery is incorrectly oriented,
malfunction may result.
3
Close the battery/card cover.
1
Getting Started
Match the marks on the battery to the marks inside the battery
compartment and push the battery in until it is locked in place.
After closing the battery/card cover, slide the battery/card cover lock
lever in the opposite direction of (1).
Removing the Battery
1
2
Open the battery/card cover.
Press the battery lock lever in the direction of (2).
The battery will be ejected. Take care not to drop the battery when
removing it.
• This camera uses a rechargeable lithium-ion battery D-LI92. Use of
any other type of battery may damage the camera and cause
malfunction.
• Insert the battery correctly. If the battery is incorrectly oriented,
malfunction may result.
• Do not remove the battery while the camera is turned on.
• When storing the battery for more than 6 months, charge the battery
for 30 minutes using the battery charger and store the battery
separately.
Be sure to recharge the battery every 6 to 12 months. Storing the
battery below room temperature is ideal. Avoid storing it in high
temperatures.
• The date and time may be returned to the default setting if the camera
is left without the battery for a long time.
• Be careful as the camera or the battery may become hot when the
camera is used continuously for a long period of time.
31
• Image Storage Capacity, Movie Recording Time, and Playback
Time
(at 23°C with the display on and the battery fully charged)
1
Getting Started
Image Storage Capacity*1
(flash used for 50% of shots)
Approx. 170 pictures
Movie Recording Time*2
Playback Time*2
Approx. 70 min.
Approx. 200 min.
*1 Recording capacity shows the approximate number of shots recorded
during CIPA-compliant testing (with display on, flash used for 50% of the
shots, and 23 degrees centigrade). Actual performance may vary
according to operating conditions.
*2 According to the result of in-house testing.
• In general, battery performance may temporarily deteriorate as the
temperature decreases.
• Be sure to take a spare battery with you when traveling abroad or to a
cold region, or if you intend to take a lot of pictures.
• Battery Level Indicator
You can check the battery level by the indicator on the display.
Screen Display
(green)
(green)
(yellow)
(red)
[Battery depleted]
32
Battery Status
Adequate power remains.
Battery is running low.
Battery is running very low.
Battery is exhausted.
The camera will turn off after this message appears.
Using the AC Adapter
Use of the optional AC adapter kit (K-AC64) is recommended if you
intend to use the camera for a long time or connect it to a computer.
1
Getting Started
1
4
3
2
1
2
3
4
Make sure that the camera is turned off and open the
terminal cover.
Connect the DC terminal on the AC adapter to the
camera’s DC input terminal.
Connect the AC plug cord to the AC adapter.
Plug the AC plug cord into the power outlet.
• Make sure that the camera is turned off before connecting or
disconnecting the AC adapter.
• Make sure that the AC plug cord and the power cord connecting the
AC adapter to the camera are inserted securely. The data may be lost
if either becomes disconnected while data are being recorded on the
SD Memory Card or the built-in memory.
• Use the AC adapter with due care to avoid fire or electric shock.
Be sure to read “About the Battery Charger and the AC Adapter” (p.4)
before using the AC adapter.
• Be sure to read the operation manual accompanying the AC adapter
kit K-AC64 before using the adapter.
33
Installing the SD Memory Card
1
Getting Started
This camera uses either an SD Memory Card or an SDHC Memory Card.
(Both cards are referred to as SD Memory Cards hereafter.) Captured
images and sound files are saved on the SD Memory Card if a card is
inserted in the camera. They are saved in the built-in memory if a card is
not inserted (p.38).
• Be sure to use this camera to format (initialize) an SD Memory Card
that is unused or has been used on other cameras or digital devices.
Refer to “Formatting an SD Memory Card” (p.198) for instructions on
formatting.
• Make sure that the camera is turned off before inserting or removing
the SD Memory Card.
• The still picture storage capacity varies depending on the capacity of
the SD Memory Card and the selected number of recorded pixels and
quality level (p.37).
• The power lamp blinks while the SD Memory Card is being accessed
(data are being recorded or read).
Backing Up Data
The camera may not be able to access data in the built-in memory in the case
of a malfunction. Use a computer or other device to back up important data in
another location.
34
1
Getting Started
Battery/Card cover
Battery/Card cover lock lever
1
SD Memory Card
Open the battery/card cover.
Slide the battery/card cover lock lever in the direction of the arrow to
open the cover (1).
2
Insert the SD Memory Card into the SD Memory Card
socket so that the label is facing toward the front of the
camera (the side with the lens).
Push the card in all the way. Data may not be recorded correctly if the
card is not inserted all the way.
3
Close the battery/card cover.
After closing the battery/card cover, slide the battery/card cover lock
lever in the opposite direction of (1).
To Remove the SD Memory Card
1
2
Open the battery/card cover.
Push the card into the SD Memory Card socket to eject it.
Pull the card out.
35
Precautions When Using an SD Memory Card
1
Getting Started
36
• The SD Memory Card is equipped with a writeprotect switch. Setting the switch to LOCK
prevents new data from being recorded on the
card, the stored data from being deleted, and
the card from being formatted by the camera or
Write-protect
computer.
r appears on the display when the card is
switch
write-protected.
• Care should be taken when removing the SD Memory Card immediately after
using the camera, as the card may be hot.
• Do not remove the SD Memory Card or turn the camera off while the data are
being played back or saved to the card, or the camera is connected to a
computer with the USB cable, as this may cause the data to be lost or the card
to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away
from water and store away from high temperature.
• Do not remove the SD Memory Card during formatting as this may damage
the card and render it unusable.
• The data on the SD Memory Card may be deleted in the following
circumstances. We do not accept any liability for data that are deleted
(1) when the SD Memory Card is mishandled by the user.
(2) when the SD Memory Card is exposed to static electricity or electrical
interference.
(3) when the SD Memory Card has not been used for a long time.
(4) when the SD Memory Card is ejected or the battery is removed while the
data on the card are being recorded or accessed.
• If it is not used for a long time, the data on the card may become unreadable.
Be sure to regularly make a backup of important data on a computer.
• Avoid using or storing the card where it may be exposed to static electricity or
electrical interference.
• Avoid using or storing the card in direct sunlight or where it may be exposed
to rapid changes in temperature or to condensation.
• When using an SD Memory Card with a slow recording speed, recording may
stop while you are taking movies even when there is adequate space in the
memory, or shooting and playback may take a long time.
• For information on compatible SD Memory Cards, visit the PENTAX website.
• Be sure to format an SD Memory Card that is unused or has been used on
another camera. Refer to “Formatting an SD Memory Card” (p.198).
• Please note that formatting the SD Memory Card will not necessarily delete
the data so that they cannot be recovered using off-the-shelf data recovery
software. There are off-the-shelf secure data deletion software programs
available that will completely delete the data. If you are going to discard, give
away or sell your SD Memory Card, you should ensure that the data on the
card are completely deleted or the card itself is destroyed if it contains any
personal or sensitive information. In any case, the data on your SD Memory
Card should be managed at your own risk.
Number of Images Recordable on an SD Memory
Card
Choose the appropriate number of recorded pixels for still pictures on the
[A Rec. Mode] menu.
Selecting the Recorded Pixels 1p.120
1
Getting Started
The sizes of the recorded images differ depending on the number of
recorded pixels of the images, so the number of images that will be
saved on an SD Memory Card also differs.
Choose the appropriate number of recorded pixels and frame rate in
[Movie] on the [A Rec. Mode] menu.
Selecting the Recorded Pixels and Frame Rate for Movies 1p.145
For an approximate guide to the number of images or the length of
recorded movies that will be saved on an SD Memory Card, see “Main
Specifications” (p.256).
37
Turning the Camera On and Off
1
Getting Started
Power switch
1
2
Remove the lens cap.
Press the power switch.
The camera turns on and the display turns on.
When you turn the camera on, the lens will extend. (The lens will not
extend if the default settings have not been configured.)
If the [Language/
] screen or [Date Adjust] screen appears when
you turn the camera on, follow the procedure on p.40 to set the display
language and/or current date and time.
* When the camera is turned on, the screen flickers. This is not a
malfunction.
3
Press the power switch again.
The display turns off, the lens is retracted, and the camera turns off.
Taking Still Pictures 1p.62
Checking the Memory Card
The memory card is checked when the camera
turns on and the memory status is displayed.
Memory status
38
a
+
r
38
The SD Memory Card is inserted. Images and
sound files will be saved on the SD Memory Card.
The SD Memory Card is not inserted. Images and
sound files will be saved in the built-in memory.
The write-protect switch on the SD Memory
Card is in the LOCK position (p.36).
Images and sounds cannot be recorded.
04/02/2009
14:25
Starting-up in the Playback Mode
Use this function when you want to play back images or sound files
(voice memo) straightaway without taking any pictures.
1
Getting Started
Q button
1
Power switch
Press the power switch while holding down the Q
button.
The display turns on with the lens retracted and the camera turns on
in the playback mode.
To switch from the playback mode to the A mode, press the Q button
or press the shutter release button halfway.
Playing Back Still Pictures 1p.150
39
Initial Settings
1
Getting Started
The [Language/
] screen appears when the camera is turned on for
the first time. Perform the operations in “Setting the Display Language”
below to set the language, and in “Setting the Date and Time” (p.44) to
set the current date and time.
The language, date, and time can be changed later. Refer to the pages below
for instructions.
• To change the language, follow the steps in “Changing the Display Language”
(1p.206).
• To change the date and time, follow the steps in “Changing the Date and
Time” (1p.201).
Setting the Display Language
Four-way controller
4 button
3 button
1
40
Use the four-way controller
(2345) to choose the display
language.
English
Dansk
Deutsch Svenska
Suomi
Polski
Italiano
Nederlands Magyar
MENU Cancel
OK
OK
2
Press the 4 button.
Initial Setting
1
Getting Started
The [Initial Setting] screen appears in the
English
selected language. If the desired settings
Hometown
for [Hometown] and [DST] (Daylight Saving
DST
New York
OFF
Time) appear, use the four-way controller
Settings are completed
(23) to move the frame to [Settings are
MENU Cancel
completed], and press the 4 button to
display the [Date Adjust] screen. Go to
Daylight saving time
“Setting the Date and Time” (p.44).
Go to Step 3 in “To Set Hometown and
DST” (p.43) if the desired settings do not appear.
41
If you accidentally select another language and go to the next procedure,
perform the following operation to set the language back.
1
When Another Language Has Been Inadvertently Selected
Getting Started
1
2
Press the four-way controller (5).
Use the four-way controller (2345) to select the
language and press the 4 button.
The [Initial Setting] screen appears in the selected language.
When the Screen After Step 2 Appears in Another Language
1
2
3
4
5
6
7
Press the 3 button.
This exits the settings screen and returns the camera to capture
status.
Press the 3 button.
The [A Rec. Mode] menu appears.
Press the four-way controller (5).
Use the four-way controller (32) to select [Language/
].
Press the four-way controller (5).
The [Language/
] screen appears.
Use the four-way controller (2345) to select the
language.
Press the 4 button.
The [W Setting] menu appears in the selected language.
The language is now switched to your desired language. To reset [Hometown],
[Date] and [Time], refer to the pages below for instructions.
• To change [Hometown], follow the steps in “Setting the World Time”
(1p.204).
• To change the [Date] and [Time], follow the steps in “Changing the Date and
Time” (1p.201).
42
To Set Hometown and DST
3
Press the four-way controller (3).
1
The frame moves to [Hometown].
Press the four-way controller (5).
The [Hometown] screen appears.
Initial Setting
English
Hometown
New York
DST
OFF
Settings are completed
MENU Cancel
5
Use the four-way controller (45)
to choose the city.
Hometown
City
DST
14:25
New York
MENU Cancel
6
Getting Started
4
OK
OK
Press the four-way controller (3).
The frame moves to [DST] (Daylight Saving Time).
7
8
Use the four-way controller (45) to select O (On) or P (Off).
Press the 4 button.
The [Initial Setting] screen appears.
9
Press the four-way controller (23) to move the frame to
[Settings are completed] and press the 4 button.
The [Date Adjust] screen appears. Next, set the date and time.
The video output format (NTSC/PAL) is set to the format of the city selected in
[Hometown] on the [Initial Setting] screen. Refer to “List of World Time Cities”
(p.254) for the video output format of each city set as the initial setting, and
“Changing the Video Output Format” (p.208) for changing the setting of the
video output format.
43
Setting the Date and Time
Set the current date and time and the display style.
1
1
Press the four-way controller (5).
Getting Started
The frame moves to [mm/dd/yy].
2
Use the four-way controller (23)
to choose the date and time
display style.
Choose from [mm/dd/yy], [dd/mm/yy] or
[yy/mm/dd].
Date Adjust
Date Style
mm/dd / yy 24h
Date
01/01/2009
Time
00:00
Settings are completed
MENU Cancel
3
Press the four-way controller (5).
The frame moves to [24h].
4
Use the four-way controller (23)
to select [24h] (24-hour display) or
[12h] (12-hour display).
Date Adjust
Date Style
mm/dd / yy 24h
Date
01/01/2009
Time
00:00
Settings are completed
MENU Cancel
5
Press the four-way controller (5).
The frame returns to [Date Style].
6
Press the four-way controller (3).
The frame moves to [Date].
Date Adjust
Date Style
mm/dd / yy 24h
Date
01/01/2009
Time
00:00
Settings are completed
MENU Cancel
7
Press the four-way controller (5).
The frame moves to the month.
44
8
Use the four-way controller (23)
to change the month.
9
Date Style
mm/dd / yy 24h
Date
01/01/2009
Time
00:00
Settings are completed
MENU Cancel
Press the four-way controller (3).
The frame moves to [Settings are completed].
10
Press the 4 button.
1
Getting Started
Change the day and year in the same manner.
Next, change the time.
If you selected [12h] in Step 4, the setting
switches between am and pm
corresponding to the time.
Date Adjust
This confirms the date and time.
If you press the 4 button in Step 9, the camera clock is reset to 00
seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 00 seconds.
When the [Initial Setting] or [Date Adjust] screen is displayed, you can
cancel the setting operation and switch to the capture mode by pressing
the 3 button. In this case, the [Initial Setting] screen will appear
next time you turn the camera on.
[Language/
], [Date], [Time], [Hometown] and [DST] can be changed. Refer
to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
(1p.206).
• To change the date and time, follow the steps in “Changing the Date and
Time” (1p.201).
• To change the city or turn DST on and off, follow the steps in “Setting the
World Time” (1p.204).
45
Memo
46
2
Common Operations
Understanding the Button Functions ..... 48
Setting the Camera Functions ................. 53
Understanding the Button Functions
A Mode
c
0
b
2
2
Common Operations
3
1
a
4
5
6
9
8
7
1
Power switch
Turns the camera on and off (p.38).
2
Zoom lever
3
Shutter release button
Changes the captured area (p.82).
Focuses the camera on the subject when pressed halfway in Still
Picture Capture Mode (except when s (Infinity) or \ is selected as
the focus mode).
Takes the still picture when pressed down fully (p.65).
Starts and stops movie recording in C (Movie) mode (p.143).
4
I button
Switches the Face Recognition function (p.78). The Face Recognition
function is switched as follows each time the I button is pressed:
Smile Capture ´ Face Priority Off ´ Face Priority On
48
5
Q button
Switches to the Q mode (p.52).
6
Four-way controller
(2)
(3)
7
W button
8
3 button
Changes the information on the display (p.20).
Displays the [A Rec. Mode] menu (p.53).
9
Green button
Switches to the 9 (Green) mode (p.80).
Calls up the assigned function (p.140).
0
EVF/LCD button
a
e-dial
2
Common Operations
(4)
(5)
(23)
Changes the drive mode (p.95 - p.101).
The Capture Mode Palette appears when H mode is
selected with the mode dial (p.69).
Changes the flash mode (p.110).
Changes the focus mode (p.113).
Adjusts \ in \ mode (p.114).
Switches between the viewfinder and the display.
Changes the shutter speed, the aperture value, and the EV
compensation value.
b
m button
Sets the EV compensation value, shutter speed, and the aperture
value.
c
b button
The flash pops up.
49
Q Mode
3
2
1
Common Operations
2
4
5
6
0
8
9
7
1
Power switch
2
e-dial
Turns the camera on and off (p.38).
Turn to the left (f) during single-image display to change to four-image
display. Changes to nine-image display when turned to the left again.
Returns to the previous display when turned to the right (y) (p.152).
Enlarges the image when turned to the right (y) during single-image
display. Returns to the previous display when turned to the left (f)
(p.161).
Turn to the left (f) during nine-image display to change to folder or
calendar display (p.154).
Turn to the right (y) during folder/calendar display to change to nineimage display (p.154).
Adjusts the volume during playback of movies or voice memo (p.151,
p.195).
3
Shutter release button
4
I button
Switches to A mode (p.52).
Zooms in on the subject’s faces in the face-recognized image in the
order the faces were recognized when the picture was taken. (Face
close-up playback) (p.162).
50
5
Q button
6
Four-way controller
Switches to A mode (p.52).
(2)
(3)
(45)
7
W button
Changes the information on the display (p.23).
8
2
Common Operations
(2345)
Plays back and pauses a movie or sound file (p.151, p.195).
Displays the Playback Mode Palette (p.157).
Stops a movie or sound file during playback (p.151, p.195).
Displays the previous or next image during single-image
display (p.150).
Fast-forwards, fast-reverses, frame forwards, frame
reverses, reverses a movie and makes a movie play
forwards during playback (p.151).
Moves the display area during zoom display (p.161).
Selects an image in four-/nine-image display, a folder in
folder display, and a date in calendar display (p.152, p.154).
Moves the image when using the Frame Composite
function (p.183).
4 button
Returns zoom display or four-/nine-image display to single-image
display (p.152, p.161).
Changes to nine-image display of the selected folder during folder
display (p.154).
Changes to single-image display of the selected date during calendar
display (p.155).
9
3 button
Displays the [W Setting] menu during single-image display (p.53).
Returns to single-image display during Playback Mode Palette display
(p.155).
Returns zoom display or four-/nine-image display to single-image
display.
In folder/calendar display, changes to nine-image display with the
cursor placed to the most recent image.
0
Green/i button
Switches from single-image display to the Delete screen (p.164).
Switches from four-/nine-image display to the Select & Delete screen
(p.166).
Switches from folder display to the calendar display screen (p.154).
Switches from calendar display to the folder display screen (p.154).
51
Switching Between A Mode and Q Mode
2
In this manual, the capture mode, such as for taking still pictures, is referred
to as “A mode” (the capture mode). The playback mode, such as for
displaying captured images on the monitor, is referred to as “Q mode” (the
playback mode). In Q mode, you can perform simple editing operations on
the images that are played back.
Follow the procedure below to switch between A mode and Q mode.
Common Operations
To Switch from A Mode to Q Mode
1
Press the Q button.
The camera switches to Q mode.
To Switch from Q Mode to A Mode
1
Press the Q button or the shutter release button
halfway.
The camera switches to A mode.
Displaying data stored in the built-in memory
When an SD Memory Card is inserted in the camera, images and
movies on the SD Memory Card are displayed. If you want to display
images and movies in the built-in memory, turn the camera off and
remove the SD Memory Card, or follow the procedure below to use the
“Built-in memory display” function.
Make sure that the camera is turned off before inserting or removing
the SD Memory Card.
Viewing images in the built-in memory while the SD Memory Card is
inserted (built-in memory display)
• When you press and hold down the Q button for more than one second
in A mode, the lens is retracted. After the message [Display image/sound
from built-in memory] appears, images and movies stored in the built-in
memory are displayed.
• In the built-in memory display, you can play back still pictures (including enlarged
display) (p.150, p.161) or movies (p.151) and switch between four-/nine-image
display, folder display and calendar display (p.152).
• In the built-in memory display, you cannot delete data, delete a selection,
display the Playback Mode Palette or display the menu. If you want to
perform any of these operations on images, movies or sounds in the builtin memory, do so after removing the SD Memory Card.
52
Setting the Camera Functions
To change the camera settings, press the 3 button to display the
[A Rec. Mode] menu or [W Setting] menu. Menus for playing back and
editing images and sound files are displayed from the Playback Mode
Palette.
2
Press the 3 button in A mode to display the [A Rec. Mode] menu.
Press the 3 button in Q mode to display the [W Setting] menu.
Use the four-way controller (45) to switch between [A Rec. Mode]
menu and [W Setting] menu.
Common Operations
Operating the Menus
53
During recording
During playback
38
100 0038
100-0038
04/02/2009
14:25
Edit
2
Common Operations
MENU
Rec. Mode
MENU
Setting
1/4
Image Tone
Bright
Recorded Pixels 12M
Quality Level
AWB
White Balance
AUTO
Sensitivity
ISO Corction in AUTO ISO50-400
Save as USER
Sound
Date Adjust
World Time
MENU Exit
MENU Exit
Rec. Mode
Folder Name
Setting
1/4
Image Tone
Bright
Recorded Pixels 12M
Quality Level
AWB
White Balance
AUTO
Sensitivity
ISO Corction in AUTO ISO50-400
Save as USER
Sound
Date Adjust
World Time
MENU Exit
MENU Exit
SHUTTER
04/02/2009
14:25
Folder Name
MENU
1/3
01/01/2009
English
Date
1/3
01/01/2009
English
Date
or
Press halfway
The setting is
complete and
the camera
returns to A
mode.
38
04/02/2009
14:25
100 0038
100-0038
Edit
04/02/2009
14:25
The setting is
complete and
the camera
returns to Q
mode.
Available button operations appear on the display during menu
operation.
54
Ex.) To set the [Quality Level] on the [A Rec. Mode] menu
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Press the four-way controller (3).
The frame moves to [Image Tone].
Rec. Mode
1/4
Bright
12M
2
AWB
AUTO
ISO50-400
MENU Exit
3
Press the four-way controller (3) two times.
The frame moves to [Quality Level].
4
Press the four-way controller (5).
A pull-down menu appears with the items
that can be selected.
The pull-down menu displays only those
items that can be selected with the current
camera settings.
5
Recordable Image No.
12
Bright
Image Tone
Recorded Pixels 12M
Quality Level
White Balance
Sensitivity
ISO Corction in AUTO ISO50-400
MENU Cancel
OK
Common Operations
Image Tone
Recorded Pixels
Quality Level
White Balance
Sensitivity
ISO Corction in AUTO
OK
Use the four-way controller (23) to change the setting.
The quality level changes each time the four-way controller (23) is
pressed.
6
Press the 4 button or the four-way controller (4).
The setting is saved and then the camera is ready for setting the other
functions. To exit the settings, press the 3 button.
To use another operation, refer to the alternate Step 6 options on the
next page.
55
To Save the Setting and Start Taking Pictures
6
Press the shutter release button halfway.
The setting is saved and the camera returns to capture status.
When the shutter release button is pressed fully, the picture is taken.
When the [W Setting] menu is displayed from Q mode, you can switch
to A mode by pressing the Q button.
2
Common Operations
To Save the Setting and Start Playback of Images
6
Press the Q button.
When the [A Rec. Mode] menu is displayed from A mode, the setting
is saved and the camera returns to playback status.
To Cancel the Changes and Continue with Menu Operations
6
Press the 3 button.
The changes are canceled and the screen returns to Step 3.
The 3 button function differs depending on the screen. Refer to the
guide indications.
MENU Exit
Exits the menu and returns to the original screen.
MENU
Returns to the previous screen with the current
setting.
MENU Cancel
56
Cancels the current selection, exits the menu and
returns to the previous screen.
Menu List
This displays the items that can be set with the menus and provides
descriptions of each item. See the list of default settings in the Appendix
“Default Settings” (p.249) to decide whether you want the settings saved
when the camera is turned off and whether you want the settings
returned to the defaults when the camera is reset.
Description
For setting the tone of still pictures
For choosing the number of recorded pixels of still pictures
For setting the quality level of still pictures
For adjusting the color balance according to the lighting conditions
For setting the sensitivity
For setting the adjustment range when sensitivity is set to
AUTO
For setting the autofocus conditions
For choosing the area of the screen that is metered to
AE Metering
determine the exposure
Flash Exp. Comp. For adjusting the flash output
Recorded
For choosing the number of recorded pixels of movies
Pixels
For choosing whether or not to use the movie shake
Movie SR
reduction function
Bright Area Adj. For choosing whether or not to adjust brightness.
For choosing whether to compensate for shaking while
Shake Reduction
taking still pictures
For setting the interval, number of pictures, and start time
Interval Shoot
for taking pictures
For choosing whether to use the Blink Detection function
Blink Detection
when the Face Recognition function worked
For choosing whether or not to use the digital zoom function
Digital Zoom
Instant Review
For choosing whether to display Instant Review
For choosing whether to save the set values of the shooting
Memory
function or return to the defaults when the camera is turned off
Green Button
For assigning a function to the Green button in A mode
Sharpness
For choosing sharp or soft outlines
Saturation (Tone For setting the color saturation. When [Monochrome] is
Adjustment)
selected, [Tone Adjustment] is set
Contrast
For setting the image contrast level
For choosing whether to imprint the date and/or time when
Date Imprint
taking still pictures
Movie
Item
Image Tone
Recorded Pixels
Quality Level
White Balance
Sensitivity
ISO Corction in
AUTO
AF Setting
Page
p.119
p.120
p.122
p.123
p.125
p.127
2
Common Operations
[A Rec. Mode] Menu
This menu shows the functions related to taking still pictures and recording movies.
p.116
p.128
p.129
p.145
p.146
p.130
p.132
p.133
p.135
p.84
p.135
p.147
p.140
p.136
p.137
p.138
p.139
57
[A Rec. Mode] Menu 1
Rec. Mode
Image Tone
Recorded Pixels
Quality Level
White Balance
Sensitivity
ISO Corction in AUTO
2
1/4
Bright
12M
AWB
AUTO
ISO50-400
[A Rec. Mode] Menu 2
2/4
Rec. Mode
AF Setting
AE Metering
Flash Exp. Comp. 0.0
Movie
Bright Area Adj.
Shake Reduction
Common Operations
MENU Exit
MENU Exit
[A Rec. Mode] Menu 3
[A Rec. Mode] Menu 4
Rec. Mode
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
MENU
Exit
3/4
4/4
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint
Off
MENU Exit
• Use the 9 (Green) mode to enjoy easy picture-taking using standard
settings, regardless of the settings in the [A Rec. Mode] menu (p.80).
• Assigning frequently used functions to the Green button enables you
to go straight to the desired function (p.140).
[W Setting] Menu
Item
Save as USER
Sound
Date Adjust
World Time
Language/
Folder Name
USB Connection
Video Out
Brightness Level
58
Description
For saving the current camera settings in USER mode.
For adjusting the operation volume and playback
volume, and setting the start-up sound, shutter sound,
key operation sound and self-timer sound
For adjusting the date and time
For setting the Hometown and Destination
For setting the language in which menus and
messages appear
For choosing how names are assigned to folders for
storing images and sound files
Set the method for connecting to a PC (MSC or PTP)
For setting the output format to the AV equipment
For changing the brightness of the display
Page
p.199
p.200
p.201
p.204
p.206
p.207
p.224
p.208
p.209
Item
Power Saving
Auto Power Off
Quick Zoom
Guide Display
Reset
Delete all
Format
[W Setting] Menu 1
Setting
Save as USER
Sound
Date Adjust
World Time
Folder Name
[W Setting] Menu 2
Setting
1/3
01/01/2009
English
Date
MENU Exit
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
Page
p.210
p.211
p.212
p.213
p.215
p.168
p.198
2
Common Operations
Description
For setting the time until the camera enters powersaving mode
For setting the time until the camera turns off
automatically
For choosing whether to use the Quick Zoom function
(p.161) when playing back images
For setting whether to display explanations for
selected items in Capture Mode Palette and Playback
Mode Palette displays.
For returning settings other than the date and time,
language, world time and video out to their defaults
For deleting all the saved images and sound files at
once.
For formatting the SD Memory Card
2/3
MSC
NTSC
5sec.
3min.
MENU Exit
[W Setting] Menu 3
Setting
3/3
Guide Display
Reset
Delete all
Format
MENU Exit
59
Memo
60
3
Taking Pictures
Taking Still Pictures .................................. 62
Selecting the Appropriate Capture Mode
.................................................................. 68
Setting the Exposure ............................... 107
Setting the Shooting Functions ............. 110
Recording Movies ................................... 143
Saving the Settings (Memory) ............... 147
Taking Still Pictures
Holding the Camera
How you hold the camera is important when taking pictures.
• Hold the camera firmly with both hands.
• Press the shutter release button gently when taking a picture.
3
Taking Pictures
Horizontal position
Vertical position
To reduce camera shake, support your body or the camera on a solid
object such as a table, tree or wall.
62
Taking Pictures
The X70 features various capture modes, focus modes, and drive
modes for expressing your photographic vision. This section explains
how to take pictures by simply pressing the shutter release button. In
I (Auto Picture) mode, the camera automatically selects the most
appropriate mode depending on the situations and subjects.
1
2
Remove the lens cap.
Press the power switch.
3
Set the mode dial to I.
The camera will select the optimal capture mode for the subject.
3
Taking Pictures
The camera turns on and is ready to take still pictures. In this manual,
this is called Still Picture Capture Mode.
Dial indicator
63
4
Confirm the subject and shooting
information on the display.
38
The focus frame in the middle of the display
indicates the zone of automatic focusing.
04/02/2009
14:25
Focus frame
When the camera recognizes a person’s
face, the Face Recognition function is
activated and the face recognition frame
appears (p.78).
3
38
Taking Pictures
04/02/2009
14:25
You can change the captured area by
turning the zoom lever to the left or right
(p.82).
Right (x) Enlarges the subject.
Left (w) Widens the area that is
captured by the camera.
5
Face recognition frame
Press the shutter release button
halfway.
38
The automatically selected capture mode
appears on the top left of the display.
04/02/2009
14:25
1/250
F3.5
Standard
Night Scene
Night Scene Portrait
Landscape
Flower
Portrait
Sport
The focus frame (or face recognition frame) on the display turns green
when the camera focuses on the subject at the correct distance.
When using the flash, press the b button to pop up the flash. (p.112)
64
6
Press the shutter release button fully.
The picture is taken.
The flash discharges automatically depending on the light conditions.
The image appears on the display for one second (Instant Review: p.67)
and is saved to the SD Memory Card or the built-in memory.
3
Taking Pictures
• Press the Green button to switch to the 9 (Green) mode and let the
camera set all the shooting functions automatically (p.80).
• The following restrictions apply in I mode:
- You cannot turn the Face Recognition function off.
- The [Focusing Area] setting is fixed at J (Multiple).
- The I (Flower) mode cannot be selected when using Digital Zoom
or Intelligent Zoom.
- If the A (Night Scene) mode is selected when the flash mode is ,
(Auto), the flash mode automatically changes to a (Flash Off).
- If the A (Night Scene) mode is selected when the flash mode is set
to a mode other than , (Auto), the settings before selection are
used. However, the flash is set to G (Slow-speed Sync).
- When the drive mode is set to L (Continuous Shooting(L)), M
(Continuous Shooting(M)) or H (Continuous Shooting(H)), pictures
are taken continuously in the appropriate shooting mode selected for
the first picture.
- The camera automatically focuses on the subject when the [Auto
Macro] is set to on, and the focus mode is set to = (Standard) or
q (Macro).
65
Using the Shutter Release Button
The shutter release button works in a two-step action as follows.
Press halfway
This refers to pressing the shutter release button gently to the first
position. This locks the focus setting and the exposure. The green focus
frame lights on the display when the shutter release button is pressed
halfway and the subject is in focus. If the subject is out of focus, the
frame turns white.
3
Taking Pictures
Press fully
This refers to pressing the shutter release button all the way down to the
fully depressed position. This takes a picture.
Not pressed
Pressed halfway
Pressed fully
(first position) (second position)
• Press the shutter release button gently when taking a picture to
prevent camera shake.
• Practice pressing the shutter release button halfway/fully to learn
where the first position and second position are.
Poor focusing conditions
The camera may not be able to focus under the following conditions. In these
cases, lock the focus on an object the same distance away as the subject (by
pressing and holding the shutter release button halfway), then aim the camera
at your subject and press the shutter release button fully.
•
•
•
•
•
Objects that lack contrast such as a blue sky or white wall
Dark places or objects, or conditions that prevent light being reflected back
Horizontal lines or intricate patterns
Fast moving objects
When there is an object in the foreground and an object in the background in
the captured area
• Strongly reflected light or strong backlighting (bright background)
66
Instant Review and Blink Detection
The image appears on the display for one second (Instant Review)
immediately after it is captured. If the camera detects that the subject’s
eyes are closed while the Face Recognition (p.78) is activated, the
message [Closed eyes have been detected.] appears for 3 seconds
(Blink Detection).
3
Taking Pictures
• When the Face Recognition function does not work, Blink Detection
also does not function. Even if the subject’s faces are recognized,
Blink Detection may not function depending on the condition of the
recognized faces.
• You can also disable Blink Detection function (p.135).
67
Selecting the Appropriate Capture Mode
You can switch the capture modes by setting the icons on the
mode dial to the dial indicator.
3
Taking Pictures
Dial indicator
The X70 features various shooting modes, enabling you to take pictures
with settings suited to your photographic vision.
In this manual, capture modes are referred to as follows.
Picture mode
I (Auto Picture)/ \ (Sport)/ c (Digital SR)
H (Landscape)/ I (Flower)/ P (Portrait)/
(Backlight)/ C
(Half-length Portrait)/ A (Night Scene)/ B (Night Scene
Portrait)/ n (Stage Lighting)/ Q (Surf & Snow)/
(Baby)/ R
H (Scene) mode
(Kids)/ Y (Pet)/ K (Food)/ S (Fireworks)/ N (Frame
Composite)/ B (Party)/ E (Museum)/ K (Sunset)/ X
(Digital Wide)/ F (Digital Panorama)
68
Exposure mode
e (Program)/ b (Shutter Priority)/ c (Aperture Priority)/ a
(Manual)/ A (USER)
Movie mode
C (Movie)
Picture Mode
You can use the mode dial to select I (Auto Picture), \ (Sports) or
c (Digital SR).
The characteristics of each mode are as follows.
Shooting Mode
I Auto Picture
\
c
Sport
Digital SR
Page
Description
The optimal capture mode is automatically selected
from standard settings (Normal mode).
For a fast moving subject. Tracks the subject until the
picture is taken.
Higher sensitivity reduces blur.
p.63
p.90
p.85
3
Taking Pictures
H Mode
By setting the mode dial to H (Scene), you can choose from 20
shooting modes.
Selecting a Shooting Scene
1
Set the mode dial to H, and press the (3) button.
The Capture Mode Palette appears.
2
Use the four-way controller
(2345) to choose a shooting
mode.
When an icon is selected in the Capture
Mode Palette, the selected shooting mode
guide appears.
3
Press the 4 button.
The shooting mode is selected and the
camera returns to capture status.
When using the flash, press the b button to
pop up the flash. (p.112)
Landscape
1/2
For capturing landscape
views. Enhances colors
of sky and foliage
OK OK
MENU Cancel
Cance
cel
38
04/02/2009
14:25
69
There are 20 available shooting modes.
Shooting Mode
3
Taking Pictures
70
Description
Page
For capturing landscape views. Enhances colors of
H Landscape
—
sky and foliage.
For images of flowers. The outline of the flower is
I Flower
—
softened.
For capturing portraits. Reproduces a healthy and
P Portrait
p.86
bright skin tone.
For backlit images. Please use flash to properly
Backlight
—
expose the subject.
Half-length
For portraits with proper framing by automatic
C
p.86
Portrait
zoom. Fixed to h (2048×1536).
For night time images. Use of a tripod or other
p.85
A Night Scene
support is suggested.
Night Scene
For images of people at night. Use of a tripod or
B
p.85
Portrait
other support is advised.
For moving subjects on poorly lit stages.
n Stage Lighting
—
Resolution reduced to 2MP.
For bright images such as sand or snow.
Q Surf & Snow
p.90
Accurately meters for bright scenes.
For images of babies. Captures bright images of a
Baby
—
baby's expressions.
For capturing moving kids. Reproduces healthy
R Kids
p.88
and bright skin tone.
For capturing moving pets. Select the color
Y Pet
p.89
according to the pet’s coat.
For images of food and prepared dishes.
K Food
—
Enhances saturation and contrast.
For capturing fireworks. Use of a tripod or other
p.85
S Fireworks
support is suggested.
For capturing images with a frame. Recorded
N Frame Composite
p.93
pixels is fixed to h (2048×1536).
For capturing images at parties or in dim light.
p.92
B Party
Increases ISO and clarity.
For capturing images in places where a flash is
E Museum
—
prohibited.
K Sunset
For images of sunsets and warm lighting
—
Stitches two pictures together to create a wider
X Digital Wide
p.102
image.
Stitches images taken with the camera to create a
F Digital Panorama
p.104
panoramic photograph.
Some functions may not be available or may not function fully depending
on the selected shooting mode. For details, refer to “Functions Available
for Each Shooting Mode” (p.240).
Exposure Mode
Use the exposure modes to change the sensitivity, shutter speed and
aperture and take pictures according to your own photographic vision.
Shooting Mode
Program
b
Shutter Priority
c
Aperture Priority
a
Manual
A USER
Page
p.71
p.72
p.73
3
Taking Pictures
e
Description
Automatically sets shutter speed and aperture to
the proper exposure according to Program line
when taking pictures.
Lets you set the desired shutter speed to freeze or
emphasize subject movement. Take pictures of
fast moving subjects that look still or subjects that
give a sense of movement.
Lets you set the desired aperture for controlling the
depth of field. Use it to obtain a blurred or sharp
background.
Lets you set shutter speed and aperture to capture
the picture with creative intent.
Lets you save user-defined settings.
p.75
p.76
Using the e (Program) Mode
1
Set the mode dial to e.
71
2
Turn the e-dial to change the
shutter speed and aperture while
maintaining the proper exposure.
Direction to
turn the e-dial
Right
3
Left
Effect
Taking Pictures
The shutter speed
decreases by increments of
1/3EV and the aperture is
closed by 1/3EV.
The shutter speed increases
by increments of 1/3EV and
the aperture is opened by 1/
3EV.
This allows you adjust blurring in the image.
Shutter speed
Aperture
3
Take a picture.
Using the b (Shutter Priority) Mode
1
72
1/250
F4.5
When using the flash, press the b button.
The flash pops up. (p.112)
4
38
Set the mode dial to b.
04/02/2009
14:25
2
Turn the e-dial to change the
shutter speed.
The shutter speed can be set within the
range of 1/4000 to 4 seconds.
3
When using the flash, press the b button.
The flash pops up. (p.112)
Take a picture.
• The aperture and sensitivity (only when sensitivity is set to [AUTO]) are
automatically set in combination with the shutter speed being used to
achieve proper exposure. If the proper exposure cannot be achieved,
the closest value is set and the aperture is displayed in red.
• , (Auto), c (Auto+Red-eye), b (Flash On), and d (Flash On +Redeye) are unavailable.
• The shutter speed set in this mode is shared with manual mode.
Changes to this value in one mode are reflected in the other.
3
Taking Pictures
4
• Noise Reduction is used with shutter speeds slower than 1/4 seconds.
• The shutter speed will be saved whenever it is changed. It will return
to default by using [Reset] on the menu. The default setting is 1/125
seconds.
• In b mode, the shutter speed is displayed in a larger font size than
normal (height of 1.5x). When using EV compensation, the EV
compensation value is displayed using a larger font.
Using the c (Aperture Priority) Mode
Set aperture for controlling the depth of field. The depth of field is deeper
and the front and back of the focused object is clear when aperture is set
to a large value. The depth of field is shallower and the front and back of
the focused object is blurred when aperture is set to a small value.
Shutter speed is automatically set to appropriate exposure depending on
the aperture value.
73
1
2
3
Taking Pictures
3
Set the mode dial to c.
Turn the e-dial to change the
aperture value.
When using the flash, press the b button.
The flash pops up. (p.112)
4
Take a picture.
• The shutter speed and sensitivity (only when sensitivity is set to
[AUTO]) are automatically set in combination with the aperture being
used to achieve proper exposure. If the proper exposure cannot be
achieved, the closest value is set and the shutter speed is displayed in
red.
• , and c are unavailable.
• The aperture set in this mode is shared with manual mode. Changes
to this value in one mode are reflected in the other.
• Noise Reduction is used with shutter speeds slower than 1/4 seconds.
• In c mode, the aperture is displayed in a larger font size than normal
(height of 1.5x). When using EV compensation, the EV compensation
value is displayed using a larger font.
• Even when the zoom ratio is changed, the aperture is maintained.
However, when the current aperture cannot be used with the selected
zoom ratio, the closest aperture is set. Even in this case, if you change
the zoom ratio again and the original aperture can be used, the setting
is returned to the original aperture.
74
Using the a (Manual) Mode
You can set the shutter speed and aperture value. This mode is suitable
to take pictures of your choice by combining them. This mode is
convenient for taking pictures using the same combination of the shutter
speed and aperture settings or taking intentionally underexposed
(darker) or over-exposed (brighter) photographs.
1
Set the mode dial to a.
3
Turn the e-dial to change the
shutter speed/aperture value.
Use the m button to switch between the
shutter speed and the aperture value and
to change the settings. In the default state,
shutter speed is selected.
3
Taking Pictures
2
When using the flash, press the b button.
The flash pops up. (p.112)
4
Take a picture.
75
• In a (Manual) mode, EV compensation is unavailable.
• A warning appears if there is a large difference between the current
exposure and the proper exposure. If the exposure is greater than
±2.0EV, only the exposure warning icon is displayed. If the exposure
is lower than ±2.0EV, the exposure warning icon is displayed and the
difference between the current exposure and the proper exposure is
shown in increments of 1/3EV.
• [AUTO] cannot be selected for sensitivity.
• ,, c, b, and d are unavailable.
• The shutter speed and aperture set for this mode are shared with b
and c modes. Changes to this value in one mode are reflected in the
others.
3
Taking Pictures
• Noise Reduction is used with shutter speeds slower than 1/4 seconds.
• Whenever the shutter speed or aperture is changed, the new value is
shown in a larger font size than normal (height of 1.5x).
• Even when the zoom ratio is changed, the aperture is maintained.
However, when the current aperture cannot be used with the selected
zoom ratio, the closest aperture is set. Even in this case, if you change
the zoom ratio again and the original aperture can be used, the setting
is returned to the original aperture.
Using the A (USER) Mode
You can take pictures with the settings saved in [Save as USER] on [W
Setting] menu (p.199).
Save the settings for the e, b, c, and a modes in advance for later
use.
In USER mode, you can change the settings saved during shooting.
1
Set the mode dial to A.
This recalls the saved settings.
76
2
Turn the e-dial to change the
settings.
The settings you can configure change
depending on the saved mode.
3
When using the flash, press the b button.
The flash pops up. (p.112)
Take a picture.
• You can save settings in the USER mode when the capture mode is
set to e, b, c, or a by selecting [Save as USER] from the
[W Setting] menu. You cannot select [Save as USER] from other
capture modes.
• When the saved capture mode is b, the shutter speed is saved.
When the mode is set to c, the aperture is saved. When the mode is
a, the shutter speed and aperture are saved.
• In the default state, the default mode is e mode and the other settings
are saved as their respective defaults. Using [Reset] on the menu
returns the settings to their defaults.
• In USER mode, all settings saved as defaults for modes other than
capture mode can be changed. However, the changes to them are
only reflected in USER mode. Turning off the power will cancel all
changes to them and they will return to the last saved settings in USER
mode.
• Memory cannot be changed.
• In USER mode, the same restrictions apply as for the saved capture
mode.
• If you do not select [Save as USER], changes to USER mode settings
are not saved on the camera. Note that turning off the power or
changing the capture mode returns the camera to the saved settings.
3
Taking Pictures
4
77
Using the Face Recognition Function
3
Taking Pictures
With the X70, the Face Recognition function is
available with all shooting modes.
When the camera detects a person’s face in the
image, the Face Recognition function displays
a yellow face recognition frame around the face
on the display screen, sets the focus (Face
Recognition AF) and compensates the
exposure (Face Recognition AE).
If the subject in the face recognition frame
moves, the frame also moves and changes size
as it tracks the face.
The Face Recognition function can recognize up
to 32 people’s faces. If it recognizes multiple
faces, the camera displays a yellow frame over
the main face and white frames over the other
face(s). It can display up to a total of 15 frames,
including a main frame and white frame(s).
38
04/02/2009
14:25
Face recognition frame
When the multiple faces
are recognized
38
04/02/2009
14:25
Main frame
White
frame
• Face Recognition AF and AE may not work if the subject is wearing
sunglasses, has part of the face covered or is not looking toward the
camera.
• If the camera cannot recognize the subject's face, the camera focuses
using the setting currently selected in [Focusing Area].
• When the Smile Capture function is on, the shutter may not be released
automatically because the Smile Capture function may not work in
some situations, such as when the recognized face is too small.
To Switch the Face Recognition Function
By default, the Face Recognition function is set to Face Priority On. You
can switch to the Smile Capture function, which automatically releases
the shutter when your subject smiles. The Face Recognition function is
switched as follows each time the I button is pressed:
Smile Capture ´ Face Priority Off ´ Face Priority On
78
I button
Face Priority On
Smile Capture
38
Face Priority Off
38
3
Taking Pictures
An icon indicating either Face Priority On or Smile Capture appears on
the display. (The icon does not appear when the Face Recognition
function is not activated.)
2008/07/07
2008/07/07
14:25
14:25
• The Face Recognition function cannot be set to off in I (Auto
Picture), B (Night Scene Portrait), C (Half-length Portrait),
P (Portrait), R (Kids) or
(Baby) mode. You can select either Face
Priority On or Smile Capture in these modes.
• When Face Priority Off is selected, selecting 9 (Green), I (Auto
Picture), B (Night Scene Portrait), C (Half-length Portrait), C
(Movie), P (Portrait), R (Kids), or
(Baby) modes automatically
switches to Face Priority On. When switching to another mode from
one of these modes, the Face Recognition setting returns to the
previous setting.
• If you use the Face Recognition function when the flash mode is set to
, (Auto), d (Flash On + Red-eye) is automatically selected.
79
Taking Pictures in the Basic Mode (Green Mode)
In the 9 (Green) mode, you can enjoy easy picture-taking using
standard settings, regardless of the settings in the [A Rec. Mode] menu.
The 9 mode settings are as shown below.
3
Taking Pictures
80
Flash Mode
Drive Mode
Focus Mode
Face Recognition
Information Display
Shake Reduction
Recorded Pixels
White Balance
Focusing Area
Auto Macro
Focus Assist
, (Auto)
9 (Standard)
= (Standard)
I (On)
Normal
O (On)
Image Tone
Quality Level
Bright Area Adj.
Sensitivity
Bright
D (Better)
P (Off)
AUTO
ISO Corction in
AUTO
Auto 50-800
E (4000×3000)
F (Auto)
J (Multiple)
O (On)
O (On)
EV Compensation
Blink Detection
Digital Zoom
Instant Review
Sharpness
Saturation
Contrast
Date Imprint
±0.0
O (On)
O (On)
O (On)
G (Normal)
G (Normal)
G (Normal)
Off
AE Metering
L (Multi-segment
metering)
Flash Exp. Comp.
±0.0
Shutter release button
Green button
1
38
The camera switches to 9 mode.
Press the Green button again to return to
the status before 9 mode was selected.
When the camera recognizes a person’s
face, the Face Recognition function is
activated and the face recognition frame appears (p.78).
When using the flash, press the b button to pop up the flash. (p.112)
2
3
Taking Pictures
Press the Green button in A
mode.
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
3
Press the shutter release button fully.
The picture is taken.
• Assign 9 mode to the [Green Button] on the [A Rec. Mode] menu for
using 9 mode (p.140). (The default setting is 9 mode).
• In 9 mode, you cannot change the information on the display by
pressing the W button.
• Press the 3 button in 9 mode to display the [W Setting] menu.
The [A Rec. Mode] menu cannot be displayed.
81
Using the Zoom
You can use the zoom to change the captured area.
Zoom lever
3
Four-way controller
Taking Pictures
4 button
1
Turn the zoom lever in A mode.
Right (x) Enlarges the subject.
Left (w) Widens the area that is
captured by the camera.
When you continue to turn to the right (x),
the camera automatically switches from
optical zoom to Intelligent Zoom.
Once the lever is released and turned
again, the camera switches to Digital Zoom.
38
1cm
Zoom bar
82
150.0 x
Zoom ratio
The zoom bar is displayed as follow.
Zoom in with high
image quality.
Zoom in with some degree
of image deterioration.
*3
1cm
Optical zoom range*1
Intelligent
Zoom range*2
Digital Zoom
range
Recorded pixels and the maximum zoom ratio
Recorded
pixels
E
3:2
16:9
Intelligent Zoom
Not Available (24× optical zoom only)
1:1
6
f
h
l
m
Digital Zoom
3
Taking Pictures
*1 You can zoom in to a maximum of 24× optically.
*2 The Intelligent Zoom range differs depending on the recorded
pixels. See the following table.
*3 In
(1cm Macro), the zoom position is fixed.
Approx. 31.3×
Approx. 37.0×
Approx. 46.9×
Approx. 93.8×
Approx. 150.0×
(Same as Digital Zoom)
Equivalent to approx.
150.0×
83
• It is recommended to use a tripod to prevent camera shake when
taking pictures at a high magnification rate.
• Pictures taken in the digital zoom range appear grainier than pictures
taken in the optical zoom range.
• Intelligent Zoom is not available under the following conditions:
- when the recorded pixels is set to E / 3:2 / 16:9 / 1:1 (24× optical
zoom and Digital Zoom are available)
- in c (Digital SR) mode (only 24× optical zoom is available)
- when the sensitivity is set to 3200 or 6400 (only 24× optical zoom is
available)
• The image enlarged using Intelligent Zoom may appear rough on the
display. This does not affect the quality of recorded image.
• While recording a movie, only Digital Zoom is available.
3
Taking Pictures
To Set the Digital Zoom
The digital zoom is set to O (On) in the default settings. To take pictures
using only the optical zoom and Intelligent Zoom, set the digital zoom to
P (Off).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Digital
Zoom].
Use the four-way controller (45)
to select O (On) or P (Off).
Uses Digital Zoom
Uses only optical zoom and
Intelligent Zoom
The setting is saved.
O(On)
P (Off)
4
Rec. Mode
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
MENU
Press the 3 button.
The camera returns to capture status.
Saving the Digital Zoom Function setting 1p.147
84
Exit
3/4
Taking Pictures of Dark Scenes (Night Scene/
Night Scene Portrait/Digital SR/Fireworks)
You can choose settings appropriate for taking pictures of dark scenes,
such as nightscapes.
Mode you can select with the mode dial only
c
Digital SR
Higher sensitivity reduces blur.
A
Night Scene
B
Night Scene Portrait
S
Fireworks
For night time images. Use of a tripod or other
support is suggested.
For images of people at night. Use of a tripod
or other support is advised.
For capturing fireworks. Use of a tripod or other
support is suggested.
3
Taking Pictures
Modes you can select from the Capture Mode Palette by selecting
H with the mode dial
Shutter release button
Four-way controller
4 button
1
In A mode, set the mode dial to c, or set it to H and
press the four-way controller (3).
If you set the mode dial to c, proceed to Step 4.
If you set the mode dial to H, the Capture Mode Palette appears.
2
Use the four-way controller (2345) to select A, B or
S.
85
3
Press the 4 button.
4
Press the shutter release button halfway.
The shooting mode is selected and the camera returns to capture status.
When the camera recognizes a person’s face, the Face Recognition
function is activated and the face recognition frame appears (p.78).
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5
Press the shutter release button fully.
The picture is taken.
3
Taking Pictures
• To use the flash, press the b button in Step 3 to pop up the flash.
(p.112)
• The shutter speed tends to be slower when taking pictures of dark
scenes.
• To prevent camera shake, set the Shake Reduction function (p.132) or
use a tripod and/or the self-timer function (p.95).
• In c mode, the sensitivity is automatically set to [AUTO] and the
number of recorded pixels is fixed at f (2592×1944).
• In S mode, the the sensitivity is fixed at its minimum setting.
• If you use the Face Recognition function when the flash mode is set to
, (Auto) in B mode, d (Flash On + Red-eye) is automatically
selected.
Taking Pictures of People (Half-length Portrait/
Portrait Mode)
C (Half-length Portrait) and P (Portrait) modes are suitable for taking
pictures of people. Face Recognition function (p.78) operates for each
shooting mode, making it easier to emphasize the subject’s face when taking
pictures.
86
C
Half-length Portrait
P
Portrait
For portraits with proper framing by automatic zoom.
Fixed to h (2048×1536).
For capturing portraits. Reproduces a healthy and
bright skin tone.
Shutter release button
Four-way controller
4 button
1
The Capture Mode Palette appears.
2
Use the four-way controller
(2345) to select C or P and
press the 4 button.
38
The shooting mode is selected and the
camera returns to capture status.
04/02/2009
When the camera recognizes a person’s
14:25
face, the Face Recognition function is
activated and the face recognition frame appears (p.78).
If the camera recognizes a person’s face in C mode, an orange frame
appears showing the area the camera will zoom in to.
3
3
Taking Pictures
In A mode, set the mode dial to H and press the fourway controller (3).
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
If the camera recognizes a person's face in C mode, the camera
automatically zooms in to enlarge the area in the orange frame shown
in Step 2.
When using the flash, press the b button to pop up the flash. (p.112)
4
Press the shutter release button fully.
The picture is taken.
87
Taking Pictures of Children (Kids Mode)
R (Kids) mode is suitable for taking pictures of moving children. It also
reproduces healthy and bright skin tone. Face Recognition function
(p.78) operates automatically for this mode, making it easier to
emphasize the subject’s face when taking pictures.
Shutter release button
3
Taking Pictures
Four-way controller
4 button
1
In A mode, set the mode dial to H and press the fourway controller (3).
The Capture Mode Palette appears.
2
3
Use the four-way controller (2345) to select R.
Press the 4 button.
R (Kids) mode is selected and the camera
returns to capture status.
When the camera recognizes a person’s
face, the Face Recognition function is
activated and the face recognition frame
appears (p.78).
4
38
04/02/2009
14:25
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
When using the flash, press the b button to pop up the flash. (p.112)
5
Press the shutter release button fully.
The picture is taken.
88
Taking Pictures of Your Pet (Pet Mode)
Use this mode to keep your moving pet in focus while you take the
picture and capture the color of your pet’s coat. Choose the appropriate
icon depending on what color your pet is (closer to black or white or in
between).
Shutter release button
3
4 button
1
In A mode, set the mode dial to H and press the fourway controller (3).
Taking Pictures
Four-way controller
The Capture Mode Palette appears.
2
3
Use the four-way controller (2345) to select Y.
Press the 4 button.
The Y mode selection screen appears.
4
Use the four-way controller (23)
to select Y, Z, Z, a, b or b.
There are two types of icons: a cat and dog
icon. Choosing either the cat or dog icon
does not affect the resulting picture. Choose
whichever you prefer.
Choose an icon (white, gray, or black) whose
tone best matches your pet’s coat or fur.
MENU Cance
Cancel
cel
OK
OK
89
5
Press the 4 button.
Y mode is selected and the camera returns
to capture status.
When the camera recognizes a person’s
face, the Face Recognition function is
activated and the face recognition frame
appears (p.78).
6
Press the shutter release button halfway.
7
Press the shutter release button fully.
38
04/02/2009
14:25
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
The focus frame follows the subject while the shutter release button is
pressed halfway.
When using the flash, press the b button to pop up the flash. (p.112)
3
Taking Pictures
The picture is taken.
Taking Pictures of Sports and Leisure Activities
(Surf & Snow/Sport Mode)
Mode you can select with the mode dial only
\
Sport
For a fast moving subject. Tracks the subject until the picture
is taken.
Mode you can select from the Capture Mode Palette by selecting
H with the mode dial
Q
90
Surf & Snow
For bright images such as sand or snow. Accurately meters
for bright scenes.
Shutter release button
Four-way controller
4 button
1
If you set the mode dial to \, proceed to Step 4.
If you set the mode dial to H, the Capture Mode Palette appears.
2
3
Use the four-way controller (2345) to select Q.
Press the 4 button.
3
Taking Pictures
In A mode, set the mode dial to \, or set it to H and
press the four-way controller (3).
The shooting mode is selected and the camera returns to capture
status.
When the camera recognizes a person’s face, the Face Recognition
function is activated and the face recognition frame appears (p.78).
4
Press the shutter release button
halfway.
38
The focus frame on the display turns green
when the camera focuses on the subject at
the correct distance.
04/02/2009
When the Sport mode is selected, the focus
14:25
frame follows the subject while the shutter
release button is pressed halfway.
When using the flash, press the b button to pop up the flash. (p.112)
5
Press the shutter release button fully.
The picture is taken.
91
Taking Pictures Indoors (Party Mode)
B (Party) mode is perfect for taking pictures indoors, such as snapshots
at parties.
Shutter release button
3
Taking Pictures
Four-way controller
4 button
1
In A mode, set the mode dial to H and press the fourway controller (3).
The Capture Mode Palette appears.
2
3
Use the four-way controller (2345) to select B.
Press the 4 button.
B mode is selected and the camera returns to capture status.
When the camera recognizes a person’s face, the Face Recognition
function is activated and the face recognition frame appears (p.78).
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
When using the flash, press the b button to pop up the flash. (p.112)
5
Press the shutter release button fully.
The picture is taken.
92
Framing Your Pictures (Frame Composite Mode)
In N (Frame Composite) mode, you can take pictures using the frames
stored in the camera.
Shutter release button
e-dial
3
4 button
1
In A mode, set the mode dial to H and press the fourway controller (3).
The Capture Mode Palette appears.
2
Taking Pictures
Four-way controller
Use the four-way controller (2345) to select N and
press the 4 button.
A 9-frame display of the frame selection screen appears.
3
Use the four-way controller
(2345) to choose the frame you
want to use.
y
OK
OK
93
4
Turn the e-dial to the right (y).
The selected frame appears in single
-image display.
You can choose another frame using
either of the following operations.
Four-way controller (45)
e-dial to the left (f)
3
Taking Pictures
5
Press to choose a different frame.
Turn to return to the 9-frame display of the frame
selection screen, and then perform Step 3 to
choose a different frame.
Press the 4 button.
The frame appears on the display.
When the camera recognizes a person’s
face, the Face Recognition function is
activated and the face recognition frame
appears (p.78).
6
38
04/02/2009
14:25
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
When using the flash, press the b button to pop up the flash. (p.112)
94
7
Press the shutter release button fully.
The picture is taken.
• In N mode, recorded pixels is fixed at h (2048 × 1536).
• At shipment, the camera includes 3 default frames and 87 optional
frames built-in. (The CD-ROM supplied with the camera contains a
total of 90 frames, including the default frames.)
• In N mode, "Grid Display" is unavailable.
Optional Frames
Adding a Frame to a captured image 1p.183
Using the Self-timer
3
Taking Pictures
The optional frames are stored in the built-in memory in the X70. These optional
frames are deleted if the files on the built-in memory are deleted with a computer or the
built-in memory is formatted. To reload the optional frames into the built-in memory,
copy the files from the CD-ROM (S-SW87) supplied with the camera (p.185).
In Self-timer mode, the picture is taken ten seconds or two seconds after
the shutter release button is pressed.
Stabilize the camera with a tripod or other support when taking a picture
with the self-timer.
g
Z
Use this mode when you want to be included in a group picture. The picture
is taken approximately ten seconds after the shutter release button is
pressed.
Use this mode to avoid camera shake. The picture is taken approximately two
seconds after the shutter release button is pressed.
Shutter release button
Four-way controller
4 button
95
1
2
Press the four-way controller (2) in A mode.
Use the four-way controller (45)
to select g or Z and press the 4
button.
L
M
H
Drive
Dri
rive
ve Mode
Mo
3
The camera is ready to take the picture
Self-timer
Self-t
-time
mer
Se
using the self-timer.
When the camera recognizes a person’s
MENU Cancel
Cance
cel
face, the Face Recognition function is
activated and the face recognition frame appears (p.78).
Taking Pictures
3
OK
OK
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
When using the flash, press the b button to pop up the flash. (p.112)
4
Press the shutter release button fully.
The picture is taken ten seconds or two seconds later.
Focusing may be compromised if you move the camera while the selftimer lamp is blinking when taking still pictures.
• In C (Movie) mode, recording will start after ten seconds (or two
seconds).
• Press the shutter release button halfway while the self-timer is
engaged to stop the countdown and press fully to restart the
countdown.
96
Taking a Series of Pictures (Continuous
Shooting Mode)
In this mode, pictures are taken continuously as long as the shutter
release button is pressed.
L
M
H
Recorded pixels is fixed at f, and you can take up to 7
pictures continuously at an interval of approximately 4 fps.
Recorded pixels is fixed at f, and you can take up to 7
pictures continuously at an interval of approximately 6.3 fps.
Recorded pixels is fixed at f, and you can take up to 21
pictures continuously at an interval of approximately 11 fps.
Continuous
Shooting(L)
Continuous
Shooting(M)
Continuous
Shooting(H)
Taking Pictures
Shutter release button
3
Four-way controller
4 button
1
2
Press the four-way controller (2) in A mode.
Use the four-way controller (45)
to select , or
and press the
4 button.
L
M
L
M
H
H
The camera is ready to take a series of
pictures.
Drive Mode
Continuous Shooting(L)
MENU Cancel
OK
OK
97
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
4
Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter
release button pressed.
3
Taking Pictures
• The flash does not discharge in L , M and H modes.
• L , M and H cannot be selected in 9 (Green), C (Movie),
S (Fireworks), N (Frame Composite), X (Digital Wide) or
F (Digital Panorama) mode.
• Digital Zoom and Intelligent Zoom are unavailable in M and H
modes. When the sensitivity is set to 3200 and higher in L mode, they
are also unavailable.
• The interval of L , M and H varies according to the [Recorded
Pixels] and [Quality Level] settings.
• The focus, exposure and white balance are locked with the first shot.
• When the Face Recognition function is activated (p.78), it works only
when taking the first shot.
• The Blink Detection function works only for the last shot.
• In I (Auto Picture) mode, pictures are taken continuously in the
appropriate shooting mode selected for the first shot.
Taking Pictures at a Set Interval (Interval Shoot)
In this mode, a set number of pictures can be taken automatically at a
set interval from a set time.
Set the camera to take pictures in one second
increments from ten seconds to four minutes intervals
or in one minute increments from four minutes to
Interval
10 sec. – 99 min.
99 minutes intervals. You cannot set the camera to
take interval shots at intervals of less than ten
seconds.
2 shots – number
Number of
You can set this to up to 1000 shots. However, this
of recordable
Shots
cannot exceed the number of recordable images.
images
You can set one minute increments for the first
59 minutes and one hour increments from there. If the
Start Delay 0 min. – 24 hours
start time is set to 0 min., the first picture is taken as
soon as the shutter release button is pressed.
98
1
2
Press the four-way controller (2) in A mode.
Use the four-way controller (45)
to select k (Interval Shoot) and
press the 4 button.
The current interval shoot settings appear
for approximately 1 minute. To take pictures
with the current settings, go to Step 10.
3
L
M
H
Drive Mode
Interval Shoot
MENU Cancel
OK
OK
Press the 4 button while the settings are displayed.
The [Interval Shoot] setting screen appears. [Interval] is marked with the frame.
Set the interval.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to
set the minutes, then press the fourway controller (5).
3 Use the four-way controller (23) to
set the seconds, then press the fourway controller (5).
The frame returns to [Interval].
5
Interval Shoot
Interval
0min. 10sec.
Number of Shots 2
Start Delay
0hr.
0min.
Taking Pictures
4
3
MENU
Press the four-way controller (3).
The frame moves to [Number of Shots].
6
Set the number of shots.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set [Number of Shots],
then press the four-way controller (5).
The frame returns to [Number of Shots].
7
Press the four-way controller (3).
The frame moves to [Start Delay].
8
Set the start delay.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hours, then press
the four-way controller (5).
3 Use the four-way controller (23) to set the minutes, then press
the four-way controller (5).
The frame returns to [Start Delay].
99
9
Press the 3 button.
The [Interval Shoot] settings are saved and the camera returns to
capture status.
10
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
11
3
Press the shutter release button fully.
Taking Pictures
Interval shooting starts.
The camera turns off between shots (during standby). Press the power
switch during standby to display the remaining number of shots and
interval on the monitor.
The [Stop interval shooting?] message is displayed when the power
switch and then the 3 button are pressed during standby.
Pressing the 4 button cancels interval shooting.
Interval shooting is not available in 9, F, X, N or C mode.
The [Interval Shoot] settings can also be configured from the [A
Rec.Mode] menu. (p.133)
100
Shutter release button
Four-way controller
4 button
3
Press the shutter release button once to automatically adjust the
exposure and take three pictures in succession. After taking the pictures,
you can select the best one.
You can set the adjustment from ± 0.3EV to ± 2.0EV.
The shooting order is as follows: correct exposure → negative
compensation → positive compensation.
1
2
Press the four-way controller (2) in A mode.
Use the four-way controller (45)
to select a (Auto Bracket).
L
The camera is now ready to take pictures
with Auto Bracket.
M
H
Drive Mode
Auto Bracket
m
MENU
3
4
Taking Pictures
Taking Pictures with Automatic Exposure
Adjustment (Auto Bracket)
Cancel
OK
0.3
OK
Use the four-way controller (23) to select EV
compensation value and press the 4 button.
Press the shutter release button halfway.
The focus frame on the display turns green when the subject is in
focus.
101
5
Press the shutter release button fully.
Press the shutter release button once to automatically adjust the
exposure and take the three pictures at different exposures.
• When the Instant Review is set to on (p.135), the third picture taken is
shown in Instant Review after shooting (p.67).
• Auto Bracket is unavailable in C (Movie), 9 (Green), S (Fireworks),
F (Digital Panorama) and X (Digital Wide) modes.
3
Using the Digital Wide Function (Digital Wide Mode)
Taking Pictures
In X (Digital Wide) mode, you can stitch two captured images into a
single frame up to approx. 20mm coverage (35mm film equivalent).
+
Shutter release button
Four-way controller
4 button
1
In A mode, set the mode dial to H and press the fourway controller (3).
The Capture Mode Palette appears.
102
2
3
Use the four-way controller (2345) to select X.
Press the 4 button.
38
1
The camera enters the X mode.
Turn the camera 90º counterclockwise and
align your first picture.
When the camera recognizes a person’s
face, the Face Recognition function is
activated and the face recognition frame
appears (p.78).
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5
Press the shutter release button
fully.
2
The first captured image is temporarily
saved, and the shooting screen for the
second image is displayed.
OK
6
Taking Pictures
4
3
Exit
Take the second image.
Overlap the image on the preview guide on the left of the screen to compose
the second image. Repeat Steps 4 and 5 to take the second image.
The stitched first and second image appears on the display for one
second (Instant Review), and then is saved.
• To minimize distortion when taking the second image, turn the camera so
that it pivots around the right edge of the preview guide on the screen.
• Some distortion may result from moving objects, repeating patterns, or
if nothing exists when overlapping the first and second image on the
preview guide.
• When the Face Recognition function is activated (p.78), it works only
when taking the first image.
• The number of recorded pixels for images captured with X mode is
fixed at f (2592 × 1944).
103
To Cancel after Taking the First Shot
1
When the shooting screen for the second image is
displayed in Step 5 on p.103, press the 4 button or
the four-way controller (3).
A confirmation dialog appears.
2
3
Use the four-way controller (23)
to select an option and press the
4 button.
Taking Pictures
Save
Discard
Cancel
Saves the first image and you can
retake the first shot. The first image
is saved in h (2048 × 1536).
Discards the first image and you
can retake the first shot.
Returns to the shooting screen for
the second image.
Save the image(s) and
exit this screen?
Save
Discard
Cancel
OK
OK
Taking Panoramic Pictures (Digital Panorama Mode)
In F (Digital Panorama) mode, you can stitch two or three captured
frames to create a panoramic photograph with the camera.
Shutter release button
Four-way controller
4 button
1
In A mode, set the mode dial to H and press the fourway controller (3).
The Capture Mode Palette appears.
104
2
3
Use the four-way controller (2345) to select F.
Press the 4 button.
The camera enters the F mode and the message [Set shift direction]
is displayed.
4
Use the four-way controller (45)
to choose the direction in which
the images will be joined.
Set shift direction
The screen for taking the first frame is
displayed.
32
1
Taking Pictures
When the camera recognizes a person’s
face, the Face Recognition function is
activated and the face recognition frame
appears (p.78).
3
04/02/2009
14 :25
14:25
5
Press the shutter release button halfway.
6
Press the shutter release button fully.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
The screen for taking the second frame is displayed after you take the first frame.
If you select right (5) in Step 4:
The right edge of the first frame appears in semi-transparent form on
the left edge of the display.
If you select left (4) in Step 4:
The left edge of the first frame appears in semi-transparent form on
the right edge of the display.
7
Take the second frame.
Move the camera so that the semitransparent image and the actual view
overlap and press the shutter release
button.
1 2
SHUTTER
2nd Frame
OK
Exit
105
8
Take the third frame.
Repeat Steps 5 to 7 to take the third frame.
The panorama stitching starts and a stitched image appears.
The stitched image does not appear when the [Instant Review] (p.135)
is off.
• Some distortion may result from moving objects, repeating patterns, or
if nothing exists when overlapping the first and second frames or the
second and third frames on the preview guide.
• When the Face Recognition function is activated (p.78), it works only
when taking the first frame.
• Unstitched images shot in F mode are fixed at i (1600×1200).
3
Taking Pictures
To Cancel after Taking the First or Second Frame
1
After shooting the first frame in Step 6 on p.105 or
second frame in Step 7, press the 4 button or the
four-way controller (3).
A confirmation dialog appears.
2
Use the four-way controller (23)
to select an option and press the
4 button.
Save
Discard
Cancel
106
Saves the captured image(s) and
you can retake the first frame. When
this option is selected after shooting
the second frame, the first and the
second frames are stitched and
saved as a panoramic photograph.
Discards the captured image(s)
and you can retake the first frame.
Returns to the previous shooting
screen.
Save the image(s) and
exit this screen?
Save
Discard
Cancel
OK
OK
Setting the Exposure
Effect of Aperture and Shutter Speed
Correct exposure of the subject is determined by the combination of
shutter speed and aperture setting. There are many correct
combinations of shutter speed and aperture for a particular subject.
Different combinations produce different effects.
Effect of Shutter Speed
Using slower shutter speed
If the subject is moving, the image will be
blurred because the shutter is open
longer.
It is possible to enhance the effect of
motion (rivers, waterfalls, waves, etc.) by
intentionally using a slower shutter speed.
3
Taking Pictures
By changing the shutter speed, you can manipulate how time is
expressed in the pictures you create. Unlike with your own naked eyes,
in a picture you can capture a fraction of a moment or a whole period of
time, creating different effects. Use the b (Shutter Priority) mode.
Using faster shutter speed
Choosing a faster shutter speed will
allow freezing the action of a moving
subject.
A faster shutter speed also helps
preventing camera shake.
Effect of Aperture
By changing the aperture, you can control the depth of the area that
appears in focus in the picture (the depth of field). By either narrowing
the focus to emphasize a single point or giving depth to your picture
instead you can completely change the feel of the picture you create.
Use the c (Aperture Priority) mode.
107
Opening the aperture (reduce the aperture value)
Objects closer and farther than the
focused subject will be more out of
focus. For instance, if you take a picture
of a flower against a landscape with the
aperture open, the landscape in front
and behind the flower will be blurred,
emphasizing only the flower.
3
Taking Pictures
Closing the aperture (increase the aperture value)
The range in focus expands forward and
backward. For instance, if you take a
picture of a flower against a landscape
with the aperture narrowed, the
landscape in front and behind the flower
will be in focus.
Setting the Exposure (EV Compensation)
You can adjust the overall brightness of the picture.
Use this function to take pictures that are intentionally overexposed or
underexposed.
1
2
Press the m button on the top of the camera in each
capture mode.
Select the EV compensation value with the e-dial.
To brighten images, select a positive (+) value. To darken images,
select a negative (-) value.
You can select compensation value with a range of ±2.0EV in
increments of 1/3EV.
3
Press the m button.
EV compensation is set and the camera returns to capture status.
108
• EV compensation stays displayed when set to a value other than ±0.0,
but disappears after being displayed for 2 seconds at the bottom of the
screen when set to ±0.0.
• In 9 (Green)/ I (Auto Picture) modes, EV compensation is fixed
at ±0.0.
• In a (Manual) mode, EV compensation is unavailable.
• The EV compensation value displayed on the screen is enlarged when
you press the m button.
38
38
3
1/250
F4.5
+1.0
04/02/2009
14:25
Normal Display
1/250
F4.5
04/02/2009
+1.0
14:25
When the compensation
button is pressed
Taking Pictures
m
109
Setting the Shooting Functions
Selecting the Flash Mode
,
Auto
a
Flash Off
3
b
Flash On
Taking Pictures
c
Auto + Red-eye
d
Flash On + Red-eye
G
Slow-speed Sync
Sync
H Slow-speed
+Red-eye
The flash discharges automatically depending on the
light conditions.
The flash does not discharge, regardless of the
brightness. Use this mode to take pictures where flash
photography is prohibited.
The flash discharges regardless of the brightness.
This mode reduces the phenomenon of red eyes
caused by the light from the flash being reflected in the
subject’s eyes. The flash discharges automatically.
This mode reduces the phenomenon of red eyes
caused by the light from the flash being reflected in the
subject’s eyes. The flash discharges regardless of the
light conditions.
For taking bright pictures of both people and
background indoors and outdoors at night. The flash
discharges automatically.
For reducing red eye caused by the flash being
reflected in the subject's eyes. The flash discharges
automatically.
• The flash mode is fixed at a in the following situations:
- When C (Movie), S (Fireworks) or n (Stage Lighting) is selected
as the capture mode.
- When L (Continuous Shooting(L)), M (Continuous Shooting(M)) ,
H (Continuous Shooting(H)) or l (Auto Bracket) is selected as the
drive mode.
- When s (Infinity) is selected as the focus mode.
• In 9 (Green) mode, you can only select , or a.
• In A (Night Scene), b or a mode, you cannot select ,, c, E and d.
• In c mode, you cannot select , and c.
• If you use Face Recognition function when , is selected, the mode is
automatically set to d.
• A pre-flash discharges when using the red-eye reduction function.
110
Using the flash when capturing images at a close distance may cause
irregularities in the image due to the light distribution. When using the
flash at an extremely close distance, please note that a shadow of the
lens may appear in the picture taken.
Press the b button to pop up the flash and select a flash mode.
1
Press the four-way controller (4)
in A mode.
The flash selection screen appears.
You can select a flash using the four-way
controller (45).
Flash
sh Mode
Mo
Auto
Au
MENU Cancel
Cance
cel
2
OK
3
Taking Pictures
Four-way controller
4 button
OK
Press the 4 button.
The setting is saved and the camera returns to capture status.
About the red-eye phenomenon
Taking pictures using the flash may cause the subject’s eyes to appear red in
the resulting picture. This phenomenon occurs when the light from the flash is
reflected in the subject’s eyes. It can be reduced by illuminating the area around
the subject or moving closer to the subject and zooming out to a wider angle.
Setting the flash mode to c, d or H is also an effective way of reducing red
eyes.
If the subject’s eyes appear red despite such precautions, they can be corrected
by the red-eye compensation function (p.182).
Saving the Flash Mode setting 1p.147
111
Using the Flash
1
2
Select a capture mode.
Press the b button.
The built-in flash pops up and begins
charging. b (Red) blinks on the display
while charging. When the flash is fully
charged, b appears on the display. (Not
displayed in , mode)
3
Taking Pictures
b button
3
The focus frame on the display turns green when the camera is
focused.
4
Press the shutter release button fully.
The flash discharges and the picture is taken.
5
112
Press the shutter release button halfway.
Push the flash down to retract.
Selecting the Focus Mode
=
q
Standard
Macro
1cm Macro
Infinity
\ Manual Focus
This mode lets you adjust the focus manually.
AF Area Selection Select an area of the subject to focus on.
3
Taking Pictures
s
Use this mode when the distance to the subject is 40 cm
(16 in.) or more. The camera is focused on the subject in
the autofocus area when the shutter release button is
pressed halfway.
This mode is used when the distance to the subject is
approx. 10 cm to 50 cm (4 in. to 20 in.). The camera is
focused on the subject in the autofocus area when the
shutter release button is pressed halfway.
This mode is used for taking pictures of the subject from
a distance of 1 cm.
This mode is used for taking distant objects. The flash is
set to a (Flash Off).
Four-way controller
4 button
1
Press the four-way controller (5)
in A mode.
Focus
Focu
cus
s Mode
Mo
Standard
rd
St
The focus mode selection screen appears.
You can select a focus mode using the fourway controller (45).
MENU
2
Cancel
Cance
cel
OK
OK
Press the 4 button.
The setting is saved and the camera returns to capture status.
113
• In 9 (Green) mode, you can only select = or q.
• The focus mode is fixed at s in S (Fireworks) mode.
• When [Auto Macro] is on and shooting with q selected, if the subject
is further than 50 cm away, the camera automatically focuses to ∞
(Infinity). By pressing the shutter release button fully, you can also take
a picture even when the focus is not set.
Saving the Focus Mode setting 1p.147
3
To Set the Manual Focus
Taking Pictures
The procedure for setting the focus manually (\) is described below.
1
2
3
Press the four-way controller (5) in A mode.
Use the four-way controller (5) to select \.
Press the 4 button.
The central portion of the image is
magnified on the display to full screen.
Focus
Focu
cus
s Mode
Mo
Manual
Focus
Focu
cus
Ma
MENU Cancel
Cance
cel
4
OK
OK
OK
Press the four-way controller
(23).
The \ indicator appears on the display to
indicate the approximate distance to the
subject. Use the four-way controller (23)
to adjust the focus using the indicator as a
guide.
2 for distant focus
3 for closer focus
5
OK
4m
2
1
MENU
\ indicator
Press the 4 button.
The focus is fixed and the camera returns to capture status.
After the focus is fixed, you can press the four-way controller (5) again
to display the \ indicator and readjust the focus.
114
• The shooting mode and drive mode cannot be changed while the \
indicator is displayed.
• To focus at 1 cm in \ mode, turn the zoom lever and set the zoom
position to the 1 cm indicator on the zoom bar.
To switch from \ to another focus mode, press the four-way controller
(5) while the \ indicator is displayed.
AF Area Selection
3
Select a location to focus on (AF Area Selection)
With this mode, you can select a location to focus on from 25 points.
1
2
3
In A mode, press the four-way controller (5).
Use the four-way controller (45) to select
Area Selection).
Press the 4 button.
The [AF Area Selection] screen appears
with the central portion selected.
Focus Mode
AFArea Selection
MENU Cancel
4
5
(AF
Taking Pictures
Select an area to focus on for use during shooting.
OK
OK
Select the position you want to focus on with the fourway controller (2345).
Press the 4 button.
The focus is fixed and the camera returns to capture status.
To switch to another focus mode, press the 3 button while the [AF
Area Selection] screen is displayed.
115
Selecting the Autofocus Settings
You can set the autofocus area and focusing method.
1
Press the MENU button in A mode.
The [ARec.Mode] menu appears.
2
3
Use the four-way controller (23) to select
[AF Setting].
3
Press the four-way controller (5).
The [AF Setting] screen appears.
Rec. Mode
2/4
Taking Pictures
AF Setting
AE Metering
Flash Exp. Comp. 0.0
Movie
Bright Area Adj.
Shake Reduction
MENU Exit
Changing the Focusing Area
When = (Standard), q (Macro), or
(1cm Macro) is selected as the
focus mode, you can change the autofocus area (Focusing Area).
Focusing Area
J
K
W
116
The camera measures a wide area in the center of the
monitor (within the focusing area) and focuses on the
nearest subject.
The camera measures a narrow area in the center of the
Spot
monitor (the spot focusing area) making easier for you
to focus on a specific subject.
The camera continues to focus on the moving subject
Automatic Tracking while you are pressing the shutter release button
halfway.
Multiple
4
Press the four-way controller (5).
The pull-down menu appears.
AF Setting
Focusing Area
Auto Macro
Focus Assist
0.0
MENU Cancel
5
6
OK
OK
Use the four-way controller (23) to change the
[Focusing Area] setting.
3
Press the 4 button.
7
Press the 3 button twice.
The camera is ready for taking pictures.
• In C (Movie) and N (Frame Composite) modes, [Focusing Area]
cannot be set to W.
• In S (Fireworks), 9 (Green) and I (Auto Picture) modes,
[Focusing Area] is fixed at J.
Taking Pictures
The setting is saved.
Setting the Auto Macro
When [Auto Macro] is on, the focus is adjusted to the macro range as
necessary, regardless of the focus mode setting. However, when the
focus mode is set to
(1cm Macro), focus is only adjusted for the 1-cm
macro range (1cm - 30cm).
When set to off and the focus mode is set to = (Standard), the AF
operates only in the standard range, and focusing is not performed in the
macro range. When the focus mode is set to q (Macro) or
(1cm
Macro), the focus is only adjusted in the respective macro range.
Focusing is not performed in the standard range.
4
Use the four-way controller (23)
to select [Auto Macro].
AF Setting
Focusing Area
Auto Macro
Focus Assist
MENU
117
5
Use the four-way controller (45) to select [O (On)/P (Off)].
The setting is saved.
6
Press the 3 button twice.
The camera is ready for taking pictures.
Setting the AF Assist Light (Focus Assist)
3
The AF assist light aids in focusing on dark subjects. This helps you to
focus on the subject in low light conditions where auto focus does not
work properly.
Taking Pictures
4
Use the four-way controller (23)
to select [Focus Assist].
AF Setting
Focusing Area
Auto Macro
Focus Assist
MENU
5
Use the four-way controller (45) to select [O (On)/P (Off)].
The setting is saved.
6
Press the 3 button twice.
The camera is ready for taking pictures.
Looking at the light directly will not create safety hazard. However,
do not look into the emitter from a very short distance since you may
feel dazzled.
The camera does not emit the AF assist light under the following
conditions.
- In Movie mode
- When the focus mode is set to s (Infinity) or \ (Manual Focus).
118
Setting the Image Tone
Set the image tone of still pictures.
You can select from [Bright], [Natural], or [Monochrome].
The default setting is [Bright].
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Image Tone].
3
Press the four-way controller (5).
4
Use the four-way controller (23)
to select a finishing tone.
Rec. Mode
Image Tone
Recorded Pixels
Quality Level
White Balance
Sensitivity
ISO Corction in AUTO
MENU Cancel
5
1/4
Bright
Natural
Monochrome
AWB
AUTO
ISO50-400
OK
Taking Pictures
A pull-down menu appears.
OK
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
When [Monochrome] is selected, [Tone Adjustment] appears on the [A
Rec. Mode] menu for setting the tone of monochrome images instead of
[Saturation].
119
Selecting the Recorded Pixels
Recorded Pixels
Taking Pictures
Use
For printing high quality photos or A4-size pictures or
larger, or editing images on a computer.
E 4000×3000
3:2
4000×2672
16:9
4000×2256
1:1
2992×2992
6 3072×2304
f 2592×1944
h 2048×1536
For a natural feeling of expansiveness with the same
aspect ratio as HDTV.
Clearer
3
You can choose from nine recorded pixels settings for still pictures.
The larger your recorded pixels, the clearer the details will appear when
you print your picture. As the quality of the printed picture also depends
on the image quality, exposure control, resolution of the printer and other
factors, you do not need to select more than the required number of
recorded pixels. h is adequate for making postcard-size prints. The
more pixels there are, the larger the picture and the bigger the file size.
Refer to the following table for the appropriate settings according to use.
For making postcard-size prints.
l 1024× 768
m
640× 480
For posting on a website or attaching to e-mail.
The default setting is E.
If you select 16:9 , the aspect ratio of the
image is 16:9 and the monitor display for
recording and playback is as shown on the
right.
38
04/02/2009
14:25
120
1
2
3
4
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
Use the four-way controller (23) to select [Recorded
Pixels].
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23)
to change the number of recorded
pixels.
Recordable Image No.
MENU Cancel
5
Press the 4 button.
6
Press the 3 button.
12
3
12M
3:2
16:9
1:1
7M
5M
OK
OK
The setting is saved.
Taking Pictures
Image Tone
Recorded Pixels
Quality Level
White Balance
Sensitivity
ISO Corction in AUTO
The camera returns to capture status.
• The number of recorded pixels for images captured in 9 (Green)
mode is fixed at E.
• The number of recorded pixels for images captured in C (Half-length
Portrait) or N (Frame Composite) is fixed at h.
• The number of recorded pixels for images captured in c (Digital SR)
or X (Digital Wide) mode is fixed at f. (The number of recorded
pixels will be h if you exit the X mode without taking the second
picture.)
121
Selecting the Quality Level of Still Pictures
Select the quality (data compression ratio) for still images according to
how the images will be used.
The more stars (E), the higher the quality of the image, but the file size
becomes larger. The selected recorded pixels also affects the size of the
image file (p.120).
Quality Levels
C
Best
3
D
Better
Taking Pictures
E
Good
1
Lowest compression ratio. Suitable for photo prints.
Standard compression ratio. Suitable for viewing the image
on a computer screen. (default setting)
Highest compression ratio. Suitable for attaching to e-mails
or creating websites.
Press the MENU button in A mode.
The [A Rec.Mode] menu appears.
2
3
Use the four-way controller (23) to select [Quality
Level].
Press the four-way controller (5).
The pull-down menu appears.
4
Use the four-way controller (23)
to change the quality level.
The maximum number of pictures you can
take is displayed at the top of the screen
when you select a quality level.
Recordable Image No.
MENU Cancel
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera is ready for taking pictures.
In 9 (Green) mode, the quality level is fixed at D (Better).
122
12
Bright
Image Tone
Recorded Pixels 12M
Quality Level
White Balance
Sensitivity
ISO Corction in AUTO ISO50-400
OK
OK
Adjusting the White Balance
You can take pictures in natural colors by adjusting the white balance
according to the light conditions at the time of shooting.
F
Auto
The camera adjusts the white balance automatically.
G
H
Daylight
Use this mode when taking pictures outside in sunlight.
Shade
Use this mode when taking pictures outside in the shade.
I
Tungsten Light
Use this mode when taking pictures under electric or other
tungsten light.
N
W
K
Manual
Use this mode when adjusting the white balance manually.
• Set another white balance if you are not satisfied with the color
balance of pictures taken with the white balance set to F.
• Depending on the selected shooting mode, the white balance setting
may not be changed. Refer to “Functions Available for Each Shooting
Mode” (p.240) for details.
1
3
Taking Pictures
Daylight Colors
Fluorescent
Daylight White Use this mode when taking pictures under different types
Fluorescent
of fluorescent light.
White Light
Fluorescent
D
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [White
Balance].
Press the four-way controller (5).
The [White Balance] screen appears.
123
4
3
Use the four-way controller (23)
to change the setting.
You can check the results of available white
balance settings on the preview image each
time you press the four-way controller (23).
To select a type of fluorescent lighting, select
an icon for Fluorescent Light and press the
four-way controller (5). On the pull-down
menu that appears, use the four-way
controller (23) to select a type of lighting.
Taking Pictures
5
White Balance
Auto
Au
D
MENU Cancel
OK
OK
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
Refer to the following “Manual Setting” for instructions on adjusting the
white balance manually.
If you change the [White Balance] setting frequently, you can save time
by assigning it to the Green button (p.140).
Saving the White Balance setting 1p.147
124
Manual Setting
Have a blank sheet of white paper or similar material ready.
1
2
In the [White Balance] screen, use the four-way
controller (23) to select K (Manual).
Point the camera at the blank
sheet of paper or other material so
that it fills the frame displayed in
the center of the screen.
White Balance
3
D
MENU Cancel
Cance
cel
3
Adjust
OK
OK
Press the shutter release button fully.
The white balance is automatically adjusted.
4
Press the 4 button.
The setting is saved and the screen returns to the [A Rec. Mode] menu.
5
Taking Pictures
SHUTTER
Press the 3 button.
The camera returns to capture status.
Setting the Sensitivity
You can select the sensitivity to suit the brightness of the surroundings.
AUTO The sensitivity is automatically adjusted by the camera. (Sensitivity 50 - 800)
50
The lower the sensitivity, the less noise that affects the image. The
100
shutter speed will be slower in low light conditions.
200
400
800
1600
Higher sensitivity settings use faster shutter speeds in low light
3200
conditions to reduce camera shake, but the image may be affected by
noise.
6400
When the [Bright Area Adj.] is set to on, the sensitivity cannot be set to
50.
125
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
4
Use the four-way controller (23) to select [Sensitivity].
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23)
to change the sensitivity.
3
Rec. Mode
Taking Pictures
Image Tone
Recorded Pixels
Quality Level
White Balance
Sensitivity
ISO Corction in AUTO
MENU Cancel
5
1/4
Bright
AUTO
50
100
200
400
OK
OK
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
• When the sensitivity is set to 3200 or 6400, the number of recorded
pixels is fixed at f (2592×1944).
• When set to c (Digital SR), 9 (Green) or C (Movie) mode, only
[AUTO] is available.
• When set to S (Fireworks) mode, the sensitivity is fixed at its
minimum setting.
• When the 3:2 , 16:9 , 1:1 size is selected, you cannot select 3200 or
6400.
• In a (Manual) mode, you cannot select [AUTO].
Saving the Sensitivity setting 1p.147
126
Setting ISO Correction in AUTO
Set the sensitivity range when the sensitivity is set to AUTO.
You can select from 50-100, 50-200, 50-400, 50-800, and 50-1600.
• When [Bright Area Adj.] is on, the sensitivity cannot be set to 50. The
minimum sensitivity is set to 100.
• When the M (Continuous Shooting(M)) or H (Continuous
Shooting(H)) mode is selected as the drive mode, the sensitivity is
fixed at [AUTO].
1
3
Press the 3 button in A mode.
2
3
Taking Pictures
The [A Rec. Mode] menu appears.
Use the four-way controller (23) to select [ISO
Corction in AUTO].
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the sensitivity adjustment
range.
Rec. Mode
Image Tone
Recorded Pixels
Quality Level
White Balance
Sensitivity
ISO Corction in AUTO
MENU Cancel
5
1/4
Bright
ISO50-100
ISO50-200
ISO50-400
ISO50-800
ISO50-1600
OK
OK
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
127
Setting the AE Metering
You can set the area of the screen where the brightness is metered to
determine the exposure.
3
L
Multi-segment
metering
M
Center-weighted
metering
N
Spot AE metering
Taking Pictures
1
The camera divides the image into 256 areas, meters the
brightness and determines the exposure.
The camera takes a reading of the overall brightness of
the picture with the center of the image having more
influence on the exposure.
The camera determines the exposure by metering the
brightness only at the center of the image.
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [AE Metering].
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select a metering method.
Rec. Mode
MENU Cancel
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
128
2/4
AF Setting
AE Metering
Flash Exp. Comp.
Movie
Bright Area Adj.
Shake Reduction
OK
OK
• When the shutter release button is pressed halfway, the brightness is
metered and the exposure is determined.
• When the subject is outside the focusing area and you want to use N
(Spot AE metering), aim the camera at the subject and press the
shutter release button halfway to lock the exposure, then compose
your picture again and press the shutter release button fully.
• Depending on the selected shooting mode, the [AE Metering] setting
may not be changed. Refer to “Functions Available for Each Shooting
Mode” (p.240) for details.
Saving the AE Metering setting 1p.147
3
Taking Pictures
Compensating for Flash Output
You can adjust the flash output.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Flash Exp.
Comp.].
Use the four-way controller (45)
to select the EV value.
To brighten, select a positive (+) value. To
darken, select a negative (–) value.
You can choose the EV value in the range of
–2.0 EV to +2.0 EV in 1/3 EV steps.
4
Rec. Mode
2/4
AF Setting
AE Metering
Flash Exp. Comp. 0.0
Movie
Bright Area Adj.
Shake Reduction
MENU Exit
Press the 3 button.
The camera returns to capture status.
129
Compensating for Brightness
You can set whether to compensate for overexposed or blown-out parts
of the subject. The default setting is P (Off).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Taking Pictures
3
Use the four-way controller (23) to select [Bright Area
Adj.].
Use the four-way controller (45) to
switch between O (On) or P (Off).
Compensates for brightness.
Does not compensate for
brightness.
The setting is saved.
O(On)
P (Off)
4
Press the 3 button.
The camera returns to capture status.
130
Rec. Mode
2/4
AF Setting
AE Metering
Flash Exp. Comp. 0.0
Movie
Bright Area Adj.
Shake Reduction
MENU Exit
Taking Pictures Using the Shake Reduction Function
You can easily take sharp pictures using the Shake Reduction function.
Shake Reduction
The Shake Reduction function reduces camera shake that occurs
when the shutter release button is pressed. This is useful for taking
pictures in situations where camera shake is likely to occur.
The Shake Reduction function is ideal when taking pictures in the
following situations.
Blurred picture
Picture taken with
the Shake Reduction function
Taking Pictures
• When taking pictures in dimly lit locations, such as indoors, at
night, on cloudy days and in the shade
• When taking telephoto pictures
3
• The Shake Reduction function does not compensate for blurring
caused by subject movement. To take pictures of a moving
subject, increase the shutter speed.
• The Shake Reduction function may not fully reduce camera
shake when taking close-up shots. In this case, it is
recommended that the camera be used with a tripod.
• The Shake Reduction function will not fully work when shooting
with a very slow shutter speed, for example when shooting a
moving subject or night scenes. In this case, it is recommended
that the camera be used with a tripod.
131
Setting the Shake Reduction
You can set this function to correct for camera shake during shooting. If
the Shake Reduction is set to O (On), the camera automatically corrects
for camera shake in the images you shot. The default setting is O (On).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Taking Pictures
3
Use the four-way controller (23) to select [Shake
Reduction].
Use the four-way controller (45) to
switch between O (On) or P (Off).
Automatically corrects for
camera shake.
P (Off) No correction for camera
shake.
The setting is saved.
O(On)
4
Press the 3 button.
The camera returns to capture status.
132
Rec. Mode
2/4
AF Setting
AE Metering
Flash Exp. Comp. 0.0
Movie
Bright Area Adj.
Shake Reduction
MENU Exit
Setting the Interval Shooting
In this mode, a set number of pictures can be taken automatically at a
set interval from a set time.
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23)
to select [Interval Shoot].
Rec. Mode
3/4
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
MENU
3
3
Taking Pictures
Set the camera to take pictures in one second
increments from ten seconds to four minutes intervals
or in one minute increments from four minutes to
Interval
10 sec. – 99 min.
99 minutes intervals. You cannot set the camera to
take interval shots at intervals of less than ten
seconds.
2 shots – number
Number of
You can set this to up to 1000 shots. However, this
of recordable
Shots
cannot exceed the number of recordable images.
images
You can set one minute increments for the first
59 minutes and one hour increments from there. If the
Start Delay 0 min. – 24 hours
start time is set to 0 min., the first picture is taken as
soon as the shutter release button is pressed.
Exit
Press the four-way controller (5).
The [Interval Shoot] setting screen appears. [Interval] is marked with
the frame.
4
Set the interval.
Interval Shoot
1 Press the four-way controller (5).
Interval
0min. 10sec.
2 Use the four-way controller (23) to
set the minutes, then press the fourNumber of Shots 2
way controller (5).
Start Delay
0hr.
0min.
3 Use the four-way controller (23) to
MENU
set the seconds, then press the fourway controller (5).
The setting is saved, and the frame returns to [Interval].
133
5
Press the four-way controller (3).
The frame moves to [Number of Shots].
6
Set the number of shots.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set [Number of Shots],
then press the four-way controller (5).
The setting is saved, and the frame returns to [Number of Shots].
7
3
Press the four-way controller (3).
The frame moves to [Start Delay].
Taking Pictures
8
Set the start delay.
Interval Shoot
1 Press the four-way controller (5).
Current Time
10:00 AM
The current time and the recording start
Start Time
10:00 AM
time are displayed in real-time.
2 Use the four-way controller (23) to
0 hr.
0 min.
Start Delay
set the hours, then press the four-way
MENU Cancel
OK OK
controller (5).
3 Use the four-way controller (23) to
set the minutes, then press the four-way controller (5).
The setting is saved, and the frame returns to [Start Delay].
9
Press the 3 button twice.
The camera returns to the shooting screen. The operations up to this
point have only configured the [Interval Shoot] settings. To actually use
interval shooting, you must select [Interval Shoot] from the drive mode.
Taking Pictures at a Set Interval (Interval Shoot) 1p.98
Interval shooting is not available in F, X, C, 9 or N mode.
The [Interval Shoot] settings can also be configured from the drive
mode. (p.98)
134
Setting Blink Detection
This specifies whether Blink Detection works when you use the Face
Recognition function. The default setting is O (On).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Blink
Detection].
Blink Detection function works.
Blink Detection function does
not work.
The setting is saved.
O(On)
P (Off)
4
3
Rec. Mode
3/4
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
MENU
Exit
Taking Pictures
Use the four-way controller (45)
to select O (On) or P (Off).
Press the 3 button.
The camera returns to capture status.
Blink Detection 1p.67
Setting the Instant Review
Use this setting to specify whether or not an Instant Review is displayed
immediately after images are shot. The default setting is O (On: displays
the image for 1 second).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Instant
Review].
135
3
Use the four-way controller (45)
to select O (On) or P (Off).
O(On)
Instant Review is displayed for
1 second.
P (Off) Instant Review is not displayed.
The setting is saved.
4
Rec. Mode
3/4
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
MENU
Exit
Press the 3 button.
The camera returns to capture status.
3
Taking Pictures
Instant Review 1p.67
If the Blink Detection function worked when shooting, [Closed eyes have
been detected.] is displayed for 3 seconds during Instant Review.
Setting the Image Sharpness (Sharpness)
You can give the image sharp or soft outlines.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Sharpness].
Use the four-way controller (45)
to change the sharpness level.
F
G
H
Soft
Normal
Sharp
4/4
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint
Off
MENU Exit
4
Press the 3 button.
The setting is saved and the camera returns to capture status.
136
Setting the Color Saturation/Tone (Saturation/
Tone Adjustment)
You can set either color brightness (Saturation) or the tone of
monochrome images (Tone Adjustment).
The items displayed change depending on the [Image Tone] selected on
the [A Rec. Mode] menu.
Selected Image Tone
Bright, Natural
Monochrome
3
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Saturation
(Tone Adjustment)].
Use the four-way controller (45)
to select the level of saturation (or
tone).
F
G
H
4
Low (Blue for tone)
Normal (B&W for tone)
High (Sepia for tone)
4/4
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint
Taking Pictures
1
Displayed item
Saturation
Tone Adjustment
Off
MENU Exit
Press the 3 button.
The setting is saved and the camera returns to capture status.
137
Setting the Image Contrast (Contrast)
You can set the image contrast level.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
3
Taking Pictures
138
Use the four-way controller (23) to select [Contrast].
Use the four-way controller (45)
to change the contrast level.
F
G
H
Low
Normal
High
4/4
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint
Off
MENU Exit
4
Press the 3 button.
The setting is saved and the camera returns to capture status.
Setting the Date Imprint Function
You can choose whether to imprint the date and/or time when taking still
pictures.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Date
Imprint].
3
Press the four-way controller (5).
4
Use the four-way controller (23)
to select the Date Imprint details.
Choose from [Date], [Date & Time], [Time]
or [Off].
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint
MENU Cancel
5
4/4
Date
Date & Time
Time
Off
OK
Taking Pictures
A pull-down menu appears.
OK
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
• The date and/or time imprinted with the [Date Imprint] function cannot
be deleted.
• Note that if the printer or the image editing software is set to print the
date and the images to be printed already have the date and/or time
imprinted, the imprinted dates and/or times may overlap.
• O appears on the display in A mode when [Date Imprint] is set to
any setting other than [Off].
• The date and/or time are imprinted on the picture with the display style
set in the [Date Adjust] screen (p.44).
139
Setting the Green Button
You can assign one of the following functions to the Green button:
[Green Mode] (p.80) or [Fn Setting] (p.141). You can activate the
assigned function by just pressing the Green button.
Assigning a Function
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
3
Taking Pictures
2
Press the four-way controller
(23) to select [Green Button].
Rec. Mode
MENU
3
3/4
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
Cancel
Press the four-way controller (5).
The [Green Button] setting screen appears.
4
Use the four-way controller (23)
to select the function you want to
register.
Green Button
Q
9Green Mode
Fn Setting
MENU Cancel
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
[Green Mode] is registered as the default setting.
140
OK
OK
Registering Frequently Used Functions (Fn Setting)
You can register frequently used functions on the four-way controller.
Using this function, you can directly set the functions by pressing the
four-way controller without displaying the menu in capture mode.
In [Fn Setting], still picture mode and movie mode have different settings.
To execute [Fn Setting] in movie mode, press 3 button in movie
mode in Step 1 on page 140.
4
Use the four-way controller (23)
to select [Fn Setting].
Green Button
Q
MENU Cancel
5
3
9Green Mode
Fn Setting
Recorded Pixels
Quality Level
WB White Balance
Sensitivity
OK
OK
Press the 4 button.
The [Fn Setting] screen appears.
6
Use the four-way controller (23)
to select a key you want to assign
a function to.
Taking Pictures
+
+
+
+
Green Button
Q
+
+
+
+
Fn Setting
Recorded Pixels
Quality Level
WB White Balance
Sensitivity
MENU
7
Press the four-way controller (5).
The pull-down menu appears.
8
Use the four-way controller (23)
to select a function you want to
assign.
Green Button
Q
+
+
+
+
Recorded Pixels
Quality Level
WB White Balance
Sensitivity
AF Focusing Area
FL Auto Macro
MENU Cancel
9
OK
OK
Press the 4 button.
The setting is saved.
141
10
Press the 3 button twice.
The camera returns to capture status.
This function is activated only when you assign the [Fn Setting] to
the Green button.
You can assign only one function to each key.
The initial settings for Fn Setting
3
Taking Pictures
Initial settings
Still picture mode
(2) Recorded Pixels
(3) Quality Level
(4) White Balance
(5) Sensitivity
Movie mode
(2) Movie SR
(3) Recorded Pixels
(4) White Balance
(5) Focusing Area
Functions that can be assigned to each key
Selectable
items
Still picture mode
Recorded Pixels
Quality Level
White Balance
Sensitivity
Focusing Area
Auto Macro
AE Metering
Bright Area Adj.
Shake Reduction
Sharpness
Saturation (Tone Adjustment) *
Contrast
Movie mode
Recorded Pixels
Movie SR
White Balance
Focusing Area
Sharpness
Saturation (Tone Adjustment) *
Contrast
* The items displayed change depending on the [Image Tone] selected on the
[A Rec. Mode] menu. When you have selected either [Bright] or [Natural],
[Saturation] is displayed, and when [Monochrome] is selected, [Tone
Adjustment] is displayed.
Changing Assigned Items
Press the Green button in the shooting mode to display the Fn Setting
screen. Select an item with the four-way controller (2345), and press
either the (23) or (45) four-way controller to change the settings.
142
Recording Movies
Recording a Movie
This mode enables you to record movies. Sound is recorded at the same time.
Zoom lever
Shutter release button
3
4 button
1
In A mode, set the mode dial to C.
1
C (Movie) mode is selected and the
camera returns to capture status.
The following information appears on the
display.
1 Movie mode icon
2 Recording indicator (blinks during
5
4
recording)
3 Remaining recordable time
4 Focus frame (does not appear during recording)
5 Movie Shake Reduction function icon
2 3
Taking Pictures
Four-way controller
07:34
04/02/2009
14 :25
14:25
You can change the captured area by
turning the zoom lever to the left or right.
Right (x) Enlarges the subject.
Left (w) Widens the area that is
captured by the camera.
143
2
Press the shutter release button fully.
Recording starts. You can continue recording until the built-in memory
or the SD Memory Card is full, or the size of the recorded movie
reaches 2 GB.
3
Press the shutter release button fully.
Recording stops.
Playing Back a Movie 1p.151
3
Taking Pictures
• The flash does not discharge in C (Movie) mode.
• The focus mode can be changed before recording starts.
• When the focus mode is set to \(Manual Focus), you can adjust the
focus before recording starts.
• You can use the optical zoom only before recording, while the Digital
Zoom is available both before and during recording.
• While recording a movie, you cannot use the W button to
switch the shooting information displayed on the monitor.
• When the shooting mode is set to C (Movie), Face Priority is
automatically set to on. You can select Smile Capture or Face Priority
Off by pressing the I button before starting recording a movie (p.78).
When Smile Capture function is activated, movie recording starts
automatically when the camera recognizes the subject's smile.
However, depending on the condition of the recognized faces, movie
recording may not start automatically because the Smile Capture
function may not work. If this happens, press the shutter release button
to start movie recording.
Keeping the Shutter Release Button Pressed
If you keep the shutter release button pressed for more than one second,
recording will continue as long as you keep the button pressed. Shooting
stops when you take your finger off the shutter release button.
144
Selecting the Recorded Pixels and Frame Rate
for Movies
You can choose the recorded pixels and frame rate settings for movies.
The more pixels there are, the clearer the details and the bigger the file
size. The more frames per second, the better the quality of the movie,
but the file size becomes larger.
Setting
Recorded
Pixels
Frame
Rate
F
1280×720
15 fps
Records images in HDTV format (default setting).
84830
848x480
30 fps
Records images in HDTV format.
G
640×480
30 fps
H
640×480
15 fps
I
320×240
30 fps
J
320×240
15 fps
Use
Taking Pictures
Suitable for viewing on a TV or computer screen.
Movement is recorded smoothly.
Suitable for viewing on a TV or computer screen.
Increases the total recording time by making the file
size smaller.
Suitable for posting on a website or attaching to email. Movement is recorded smoothly.
Suitable for posting on a website or attaching to email. Increases the total recording time by making the
file size smaller.
3
* The frame rate (fps) indicates the number of frames per second.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Movie].
Press the four-way controller (5).
The [Movie] screen appears.
4
5
Use the four-way controller (23) to select [Recorded
Pixels].
Press the four-way controller (5).
A pull-down menu appears.
145
6
Use the four-way controller (23)
to change the number of recorded
pixels and frame rate.
Rec. Time
MENU Cancel
7
00:20
Recorded Pixels
Movie SR
OK
OK
Press the 4 button.
The setting is saved.
3
8
Press the 3 button twice.
Taking Pictures
The camera returns to capture status.
Setting the Movie SR (Movie Shake Reduction)
Function
In C (Movie) mode, you can compensate for camera shake while you are
recording a movie with the Movie SR (Movie Shake Reduction) function.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Movie].
Press the four-way controller (5).
The [Movie] screen appears.
4
5
Use the four-way controller (23) to select [Movie SR].
Use the four-way controller (45)
to select O (On) or P (Off).
Automatically corrects for
camera shake.
P (Off) No correction for camera
shake.
The setting is saved.
O(On)
6
Press the 3 button twice.
The camera returns to capture status.
146
Movie
Recorded Pixels
Movie SR
MENU
Saving the Settings (Memory)
Default
Page
Setting
A Face Recognition mode set by using the I button.
P
p.78
Face Priority
Flash Mode
The flash mode set with the four-way controller (4)
O
p.110
p.95 Drive Mode
The drive mode set with the four-way controller (2)
P
p.101
Focus Mode
The focus mode set with the four-way controller (5)
P
p.113
Zoom Position The zoom position set with the zoom lever
P
p.82
The manual focus position set with the four-way
MF Position
P
p.114
controller (23)
The [White Balance] setting on the [A Rec. Mode]
White Balance
P
p.123
menu
Sensitivity
The [Sensitivity] setting on the [A Rec. Mode] menu
P
p.125
EV
The [EV Compensation] setting on the
P
p.108
Compensation [A Rec. Mode] menu
The [AE Metering] setting on the [A Rec. Mode]
AE Metering
P
p.128
menu
The [Digital Zoom] setting on the [A Rec. Mode]
Digital Zoom
O
p.84
menu
The information display mode set with the
DISPLAY
P
p.20
W button
If a new SD Memory Card is inserted when On has
O
—
File No.
been selected, file numbers are assigned sequentially.
Item
Description
3
Taking Pictures
The Memory function is for saving the current camera settings when the
camera is turned off.
For some camera settings, the Memory function is always set to O (On)
(the settings are saved when the camera is turned off), while for others
you can choose on or off (to choose whether the settings are saved or
not when the camera is turned off). The items which can be set to O (On)
or P (Off) in the Memory function are shown in the table below. (Items
not listed here are always saved in the selected settings when the
camera is turned off.)
If you select O (On), the settings will be saved in the status they were in
immediately before the camera was turned off. If you select P (Off), the
settings will be reset to the defaults when the camera is turned off. The
table below also shows whether the Memory default setting for each item
is on or off.
147
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Memory].
Press the four-way controller (5).
The [Memory] screen appears.
4
Use the four-way controller (23)
to choose an item.
3
1/3
Taking Pictures
MENU
5
6
Use the four-way controller (45) to select O (On) or P (Off).
Press the 3 button twice.
The camera returns to capture status.
148
Memory
Face Priority
Flash Mode
Drive Mode
Focus Mode
Zoom Position
MF Position
4
Playing Back and
Deleting Images
Playing Back Images .............................. 150
Deleting Images and Sound Files .......... 164
Connecting the Camera to AV Equipment
................................................................ 173
Playing Back Images
Playing Back Still Pictures
Q button
Four-way controller
4
Playing Back and Deleting Images
1
Press the Q button after taking a
picture.
File number
100 - 0038
The camera enters the Q mode and the
image appears on the display. Displaying
one image in full in Q mode (Q mode
default setting) is called single-image
display.
Edit
Ed
04/02/2009
14:25
To Play Back the Previous or Next Image
2
Press the four-way controller (45).
The previous or next image appears.
To Delete the Displayed Image
Press the i button while the image is
displayed to display the Delete screen. Press
the four-way controller (2) to select [Delete]
and press the 4 button.
100 - 0017
Delete
Cancel
OK
For information on other deletion procedures 1p.164
150
OK
Playing Back a Movie
You can play back the movies you have taken. The sound is played back
at the same time.
e-dial
Q button
Four-way controller
1
Press the four-way controller (2).
Playback starts.
100 - 0017
00:30
04/02/2009
The following operations can be
14:25
Edit
Ed
performed during playback.
Four-way controller (4)
Plays back in reverse
Four-way controller (2)
Pauses playback
e-dial to the right (y)
Increases the volume
e-dial to the left (f)
Reduces the volume
Press and hold the four-way controller (5)
Fast-forwards playback
Press and hold the four-way controller (4)
Fast-reverses playback
The following operations can be performed while playback is
paused.
Four-way controller (4)
Reverses the frame
Four-way controller (5)
Forwards the frame
Four-way controller (2)
Resumes playback
4
Playing Back and Deleting Images
2
Enter the Q mode and use the four-way controller
(45) to choose the movie you want to play back.
151
3
Press the four-way controller (3).
Playback stops.
Multi-Image Display
e-dial
Q button
Four-way controller
4 button
4
Playing Back and Deleting Images
152
Four-Image Display/Nine-Image Display
You can display four or nine thumbnails of captured images at a time.
1
In Q mode, turn the e-dial to the
left (f).
The four-image display appears showing
a page consisting of four thumbnail
images. Turn the e-dial to the left (f)
again to switch to the nine-image display.
A page consisting of four or nine thumbnail
images appears. The displayed images
change four or nine images at a time page
by page.
Use the four-way controller (2345) to
move the frame. If there are too many
images to fit on one page, pressing the fourway controller (24) while the image 1 is
selected will display the previous page.
Similarly, if you choose image 2 and press
the four-way controller (35), the next page
appears.
♦ Indicates that the previous or next screen
is stored in a separate folder.
1
2
Select & Delete 100-0010
Four-Image Display
Folder divider icon
Frame
1
2
Nine-Image Display
The icons that appear on the images indicate the following:
(No icon)
O (with image)
C
Still picture without sound
Still picture with sound
Movie (the first frame appears)
Press the 4 button to switch to single-image display of the selected
image.
Press the Q button to switch to A mode.
4
Playing Back and Deleting Images
Select & Delete 100-0010
153
Folder Display/Calendar Display
In nine-image display, turn the e-dial to the left (f) to switch to folder
display or calendar display. Press the Green button to switch between
folder display and calendar display.
1
In Q mode, turn the e-dial to the
left (f) twice.
The screen changes to nine-image
display.
4
Playing Back and Deleting Images
154
2
Turn the e-dial to the left (f).
The screen changes to folder display or calendar display.
Folder display
The list of folders with recorded images and
sound files appears.
Use the four-way controller (2345) to
move the frame.
Press the 4 button or turn the e-dial to the
right (y) to display the images in the
selected folder in nine-image display.
Frame
100
101
103
104
102
100_0707
Calendar display
Recorded images and sound files are
Frame
displayed by date in calendar format.
SUN MON TUE WED THU FRI SAT
1
2
The first image recorded on a date is
3
4
5
6
8
9
10
11
7
displayed for that date on the calendar.
12
13
14
15
16
17
18
O appears for dates on which a still picture
19
20
21
22
23
24
25
with voice memo was the first recorded file.
26
27
28
29
30
Use the four-way controller (2345) to
2009. 04
move the frame to a different date.
Turn the e-dial to the right (y) to display the
images for a date in nine-image display.
Select a date and press the 4 button to switch to single-image
display of the first image recorded on that date.
Using the Playback Function
1
Press the four-way controller (3) in Q mode.
The Playback Mode Palette appears.
2
Use the four-way controller (2345) to choose an
icon.
The guide for the selected function appears below.
3
Press the 4 button.
4
Playing Back and Deleting Images
• Press the 3 button in folder display or calendar display to switch
to nine-image display.
• Press the Q button or half-press the shutter release button in folder
display or calendar display to switch to A mode.
The playback function is recalled.
155
100 0038
100-0038
04/02/2009
14:25
Edit
MENU
Slideshow
4
Playing Back and Deleting Images
156
1/2
Digital Filter
For continuously playing
back images. Screen or
sound effects can be set.
OK OK
Cancel
1/2
For modifying images with
a Color filter or Soft
filter.
OK OK
Cancel
MENU
MENU
SHUTTER
OK
Press halfway
38
04/02/2009
14:25
Closes the Playback Mode
Palette and goes to A mode.
MENU Cancel
OK
OK
Goes to the screen for
selected playback function.
• When the frame is placed over each icon on the Playback Mode
Palette, a guide for each function appears.
• You can turn the guide display off for each function on the Playback
Mode Palette. (p.213)
Playback Mode Palette
Page
Slideshow
p.158
p.178
p.183
p.176
p.177
p.188
p.160
p.186
p.182
p.194
p.170
p.190
p.169
p.213
4
Playing Back and Deleting Images
Description
For continuously playing back images. Screen or
u
sound effects can be set.
For modifying images with a Color filter or Soft
Digital
Filter
P
filter.
For composing an image with a frame. Select
N Frame Composite Overwrite or Save as to save.
Changes Recorded Pixels and Quality Level to
n Resize
make the file size smaller.
For cropping images to the size you like. Saved as
o Cropping
a new image.
Image/Sound
For copying images and sounds between the builtp Copy
in memory and SD Memory Card.
Rotates captured images. Useful when viewing
s Image Rotation
vertical images on a TV.
Save as Still For saving one frame from a movie as a still
Image
picture.
[
Divide
For dividing a movie into two.
Movies
Red-eye
For compensating red-eye. May not work due to
Z Compensation
the condition of the image.
Attaches sound to images. Recording is possible
\ Voice Memo
till the memory card is full.
Protects images and sounds from accidental
Z Protect
deletion. Formatting will delete.
For the print settings. Useful when printing at a
r DPOF
printing service.
For recovering image and sound files which were
] Image Recovery accidentally deleted.
For setting a captured image as the Start-up
^ Start-up Screen
Screen.
Movie Edit
Playback Mode
157
Slideshow
You can play back recorded images one after another.
1
2
Enter the Q mode and use the four-way controller
(45) to choose the image to start the slideshow with.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select u
(Slideshow).
4
Playing Back and Deleting Images
158
1/2
Slideshow
For continuously playing
back images. Screen or
sound effects can be set.
OK OK
MENU Cancel
4
Press the 4 button.
The slideshow setting screen appears.
5
Press the 4 button.
The slideshow starts.
Pressing the 4 button during the
slideshow pauses the slideshow. To
resume the slideshow, press the 4 button
again.
6
Slidesh
Sl
show st
start
rts
Slideshow
starts
Start
Interva
Interval
rval
Scre
Screen Effect
Ef ct
So
Ef
Effect
ct
Sound
MENU
Press any button other than the 4 button.
The slideshow stops.
3se
sec.
c.
3sec.
Wipe
OK
OK
To Set the Slideshow Conditions
You can set the playback interval and also a screen effect and sound
effect for when one image changes to the next.
1
Use the four-way controller (23)
to select [Interval] in Step 5 on
p.158.
St rt
Start
Interval
Screen Effect
Scre
Ef ct
Sound Ef
Effect
ct
So
3sec.
Wipe
MENU
2
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to change the interval
and press the 4 button.
Choose from [3sec.], [5sec.], [10sec.], [20sec.] or [30sec.].
4
Use the four-way controller (23) to select [Screen
Effect].
After selecting [Screen Effect], press the four-way controller (5). A
pull-down menu appears with the following items. Use the four-way
controller (23) to select an item and press the 4 button.
Wipe
Checker
Fade
Off
5
6
The next image slides over the previous one from left to right
The next image appears in small square mosaic blocks
The current image gradually fades out and the next image fades in
No effect
Playing Back and Deleting Images
3
4
Use the four-way controller (23) to select [Sound Effect].
Use the four-way controller (45) to select O (On) or P (Off).
Except when the [Screen Effect] is set to Off, you can choose O (On) or
P (Off) for the sound that is played when one image changes to the next.
7
Use the four-way controller (45) to select [Start].
159
8
Press the 4 button.
The slideshow starts using the selected interval and effect.
• The slideshow will continue until you press any button other than the
4 button.
• Movies or pictures with sound will be played through to the end before
the next picture is played back, regardless of the interval setting.
However, pressing the four-way controller (5) while playing back a
movie or a picture with sound skips to the next image.
• Panorama images will be scrolled for display from left to right in 4
seconds before the next picture is played back, regardless of the
Interval or Screen Effect setting.
Connecting the Camera to AV Equipment 1p.173
4
Playing Back and Deleting Images
Rotating the Image
Q button
Four-way controller
4 button
1
Press the Q button after taking a picture.
The image appears on the display.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller (2345) to select s
(Image Rotation) and press the 4 button.
The rotation selection screen (0°, Right 90°, Left 90°, or 180°) appears.
160
4
Use the four-way controller
(2345) to choose the rotation
direction and press the 4
button.
The rotated image is saved.
MENU Cancel
OK
OK
• Panoramic images and movies cannot be rotated.
• Protected images can be rotated, but they cannot be saved in a rotated
state.
Zoom Playback
4
e-dial
Q button
Four-way controller
4 button
1
2
Enter the Q mode and use the four-way controller
(45) to choose the image you want to magnify.
Turn the e-dial to the right (y).
Playing Back and Deleting Images
You can magnify an image up to ten times.
The image is magnified (×1.1 to ×10).
Continuing to turn the e-dial to the right
(y) changes the magnification
continuously.
When the Quick Zoom function (p.212) is
set to O (on), you can magnify the image
at 10x by simply rotating the e-dial to the
right (y).
161
You can use the + mark of the guide at the
bottom left of the screen to check which
portion of the image is magnified.
2.0×
2.0
The following operations can be performed
while the magnified image is displayed.
Four-way controller
(2345)
e-dial to
the right (y)
e-dial to
the left (f)
3
Guide
Press the 4 button.
The image returns to single-image display.
4
Playing Back and Deleting Images
Movies cannot be magnified.
Zoom In on the Subject’s Face Automatically
(Face Close-up Playback)
You can enjoy playing back images with the subject’s faces zoomed up
simply by pressing the I button (Face close-up playback) if the Face
Recognition function operated when the images were taken.
I button
Q button
1
162
Moves the position to be
magnified
Makes the image bigger
(max. ×10)
Makes the image smaller
(min. ×1.1)
Enter the Q mode and use the four-way controller
(45) to choose the image you want to magnify.
2
Confirm that the I icon is displayed in the image and
press the I button.
The image is magnified around the face first
recognized when the image was taken.
If multiple faces were recognized when the
image was taken, the subject’s faces are
zoomed up on each time the I button is
pressed in order of the recognition during
shooting.
1/2
2/2
e-dial to
the right (y)
e-dial to
the left (f)
3
Zooms in on the subject
being displayed for face
close-up playback from
an equal or slightly
larger magnification
ratio.
Zooms out on the
subject being displayed
for face close-up
playback from an equal
or slightly smaller
magnification ratio.
Playing Back and Deleting Images
The following operations can be
performed during Face close-up playback
mode.
4
Press the 4 button.
The image returns to single-image display.
The magnification ratio for Face close-up playback may differ depending
on the conditions such as the size of the face recognized when shooting.
163
Deleting Images and Sound Files
Delete images and sound files with mistakes or that you do not want to
keep.
When images or sound files are inadvertently deleted
Deleted images and sound files can be recovered with the X70 (p.169).
Deleted images and sound files can be recovered even if the camera has been
turned off after deletion as long as the SD Memory Card has not been removed.
However, deleted images and sound files cannot be recovered after operations
to write data such as taking pictures, recording movies, protecting images,
saving DPOF settings, resizing images, cropping images, or formatting have
been performed.
4
Playing Back and Deleting Images
Deleting a Single Image
You can delete a single image.
Protected images cannot be deleted (p.170).
Q button
Four-way controller
4 button
i button
1
2
Enter the Q mode and use the four-way controller
(45) to choose the image you want to delete.
Press the i button.
A confirmation screen appears.
164
3
Use the four-way controller (2) to
select [Delete].
100 - 0017
Delete
Cancel
OK
4
OK
Press the 4 button.
The image is deleted.
Recovering Deleted Images 1p.169
4
To Delete a Sound File
1
2
Enter the Q mode and use the four-way controller
(45) to choose the image with sound.
Press the i button.
A confirmation screen appears.
3
Use the four-way controller (2) to
select [Delete Sound].
100 - 0017
Delete Sound
Delete
Cancel
OK
4
Playing Back and Deleting Images
If sound (voice memo) has been recorded with an image (p.194), you
can delete the sound without deleting the image.
OK
Press the 4 button.
The sound file is deleted.
• Select [Delete] in Step 3 above to delete both the image and sound file.
• You cannot delete only the sound in a movie.
165
Deleting Selected Images and Sound Files
You can delete several images/sound files selected from the four-/nineimage display at once.
Protected images and sound files cannot be deleted (p.170).
e-dial
Q button
Four-way controller
4 button
i button
4
Playing Back and Deleting Images
1
In Q mode, turn the e-dial to the
left (f) once or twice.
Four-image display or nine-image display
appears.
2
Press the i button.
P appears on the images and sound files.
Select & Delete 100-0010
166
3
Use the four-way controller
(2345) to choose the images
and sound files that you want to
delete and press the 4 button.
O appears on the selected images and
MENU Cancel
OK
sound files.
Delete
Turn the e-dial (y) to display the selected
image in a single screen and check whether you want to delete the
image. Turning to the left returns to four/nine-image display. However,
protected images cannot be displayed in single-image display.
4
Press the i button.
A confirmation dialog appears.
4
Use the four-way controller (2) to
select [Select & Delete].
se
cted
Delete all select
selected
mages/
s/so
sounds
ima
images/sounds
Select & Delete
Cance
cel
Cancel
MENU
6
Press the 4 button.
The selected images and sound files are deleted.
OK
OK
Playing Back and Deleting Images
5
167
Deleting All Images and Sound Files
You can delete all the images and sound files at once.
Protected images and sound files cannot be deleted (p.170).
Q button
Four-way controller
4 button
3 button
4
Playing Back and Deleting Images
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23)
to select [Delete all].
Setting
3/3
Guide Display
Reset
Delete all
Format
MENU Exit
3
Press the four-way controller (5).
A confirmation dialog appears.
4
Use the four-way controller (2) to
select [Delete All].
Delete all
Delete all images/sounds
Delete All
Cancel
OK
168
OK
5
Press the 4 button.
All the images and sound files are deleted.
Recovering Deleted Images
You can recover images or sound files that were taken with this camera
and then deleted.
After deleting an image, once operations to write data such as taking
pictures, recording movies, protecting images, saving DPOF settings,
resizing images, cropping images, or formatting have been performed,
or the SD Memory Card has been removed, the message [No image to
be processed] appears in Step 3 and the deleted images and sound files
cannot be recovered.
After deleting a file, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select ] (Image
Recovery).
Image Recovery
2/2
For recovering image and
sound files which were
accidentally deleted.
OK OK
MENU Cancel
3
Press the 4 button.
The number of recoverable images appears.
If there are no recoverable images, the message [No image to be
processed] appears.
4
Use the four-way controller (2) to
select [Recover].
Playing Back and Deleting Images
1
4
5 image(s)
Want to recover?
Recover
Cancel
OK
OK
169
5
Press the 4 button.
The files are recovered.
• Recovered images and sound files have the same file name as before
they were deleted.
• Up to a maximum of 999 deleted image files can be recovered.
Protecting Images and Sound Files from Deletion
(Protect)
You can protect stored images and sound files from being accidentally
deleted.
4
1
Playing Back and Deleting Images
2
Enter the Q mode and use the four-way controller
(45) to choose the image you want to protect.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select Z (Protect).
2/2
Protect
Protects images and sounds
from accidental deletion.
Formatting will delete.
OK OK
MENU Cancel
4
Press the 4 button.
The screen for selecting [Single Image/Sound] or [All Images/Sounds]
appears.
5
Use the four-way controller (2) to
select [Single Image/Sound].
Single Image/Sound
All Images/Sounds
Cancel
OK
170
OK
6
Press the 4 button.
The message [Protect this image/sound] appears.
To protect another image or sound file, use the four-way controller
(45) to select another image or sound file.
7
Use the four-way controller (2) to
select [Protect].
100 - 0017
Protect this image/sound
Protect
Unprotect
Cancel
OK
8
OK
Press the 4 button.
4
The selected image or sound file is protected.
To Protect All Images and Sound Files
1
Select [All Images/Sounds] in Step
5 on p.170.
Single Image/Sound
All Images/Sounds
Cancel
OK
2
Playing Back and Deleting Images
• To cancel the Protect setting, select [Unprotect] in Step 7.
• Y appears on the top right of the protected images and sound files
during playback.
• The maximum number of images and sound files you can protect in
succession with [Single Image/Sound] cannot exceed 99.
OK
Press the 4 button.
171
3
Use the four-way controller (2) to
select [Protect].
Protect all images/sounds
Protect
Unprotect
Cancel
OK
4
OK
Press the 4 button.
All the images and sound files are protected.
Protected images and sound files will be deleted when the SD Memory
Card is formatted (p.198).
4
Playing Back and Deleting Images
172
To cancel the Protect setting on all your images and sound files, select
[Unprotect] in Step 3.
Connecting the Camera to AV
Equipment
By using the supplied AV cable (I-AVC7), you can capture and play back
images on equipment with a video IN jack, such as a TV.
PC/AV
terminal
External Input
Terminal
AUDIO
VIDEO (L)
(R)
yellow
Turn the AV device and camera off.
Open the camera's terminal cover and connect the AV
cable to the PC/AV terminal.
Connect the terminal of the AV cable with
on the PC/AV terminal of the camera.
3
pointing toward the 4
Connect the other ends of the AV cable (yellow: video,
white: audio) to the video input terminal and audio input
terminal of the AV device.
When using stereo sound equipment, insert the sound terminal into the
L (white) terminal.
4
Playing Back and Deleting Images
1
2
4
white
Turn the AV device on.
When the device that the camera is connected to and the device that
plays back images are different, turn both devices on.
When viewing images on AV equipment with multiple video input
terminals (such as a TV), refer to the operation manual of the device
and select the video input terminal to which the camera is connected.
173
5
Turn the camera on.
• It is recommended to use the optional AC adapter kit K-AC64 if you
intend to use the camera for a long time (p.33).
• Depending on the country or region, images and sound files may fail
to be played back if the video output format is set different from the one
in use there. If this happens, change the video output format setting
(p.208).
• The camera display turns off while the camera is connected to AV
equipment.
• The volume cannot be adjusted with the zoom lever while the camera
is connected to AV equipment.
4
Playing Back and Deleting Images
174
5
Editing and Printing
Images
Editing Images ........................................ 176
Setting the Printing Service (DPOF) ...... 190
Editing Images
Changing the Image Size (Resize)
By changing the size and quality of a selected image, you can make the
file size smaller than the original. You can use this function to continue
taking pictures when the SD Memory Card or the built-in memory is full,
by making the images smaller and overwriting the original images to
make more space available.
• Images taken with 3:2 (4000×2672), 16:9 (4000×2256) or
1:1 (2992×2992), panoramic images and movies cannot be resized.
• You cannot select a larger resolution and higher quality level than that
of the original image.
5
1
Editing and Printing Images
2
Enter the Q mode and use the four-way controller
(45) to choose the image you want to resize.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select n (Resize).
1/2
Resize
Changes Recorded Pixels
and Quality Level to make
the file size smaller.
OK OK
MENU Cancel
4
Press the 4 button.
The screen for choosing the image size appears.
5
Select [Recorded Pixels] and
[Quality Level].
Use the four-way controller (45) to choose
the size and quality.
Use the four-way controller (23) to switch
between [Recorded Pixels] and [Quality
Level].
176
Recorded Pixels
Quality Leve
Level
vel
MENU Cance
Cancel
cel
12 M
OK
OK
6
Press the 4 button.
A confirmation dialog for overwriting the image appears.
When the selected image is protected, the resized image will be saved
as a new image without the following confirmation dialog displayed on
the screen.
7
Use the four-way controller (23)
to select [Overwrite] or [Save as].
Overwrite
original image?
Overwrite
Save as
Cancel
OK
8
OK
Press the 4 button.
The resized image is saved.
5
You can delete the unwanted part of a picture and save the cropped
image as a separate image.
Images taken with 3:2 (4000×2672), 16:9 (4000×2256) or
1:1 (2992×2992), panoramic images and movies cannot be cropped.
1
2
Enter the Q mode and use the four-way controller
(45) to choose the image you want to crop.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select o (Cropping).
Cropping
Editing and Printing Images
Cropping Images
1/2
For cropping images to the
size you like. Saved as a
new image.
OK OK
MENU Cancel
177
4
Press the 4 button.
The cropping screen appears.
The largest size of the cropped image is shown with a green frame on
the screen.
The cropped image cannot be larger than this cropping frame size.
5
Choose the cropping area.
The following operations move the green
frame and set the area for cropping on the
screen.
e-dial
Changes the size of the
cropped section
Four-way controller Moves the cropping
(2345)
position up, down, left and
right
Green button
Rotates the cropping frame
• The button is only
displayed when the
cropping frame size can
be rotated.
5
Editing and Printing Images
6
MENU
OK
Cancel
OK
Press the 4 button.
The cropped image is saved with a new file name.
The number of recorded pixels is selected automatically according to
the size of the cropped section.
Using the Digital Filters
This mode lets you change the color tones and perform special
processing on a selected image.
B&W filter
Changes color images to black and white.
Sepia filter
Processes the image using the sepia filter.
Processes the image using the selected color filter. You can choose
from six filters: red, pink, purple, blue, green, and yellow.
Color extraction Processes the image using the selected color extraction filter. You
filter
can choose from three filters: red, green, and blue.
Color filter
178
Soft filter
Processes the image into a soft image.
Fish-eye filter
Applies a fish-eye lens effect to images.
Brightness filter
Adjusts the brightness of the image.
Panoramic images, movies or images taken with another camera cannot
be edited using Digital Filter function. An error message appears if you
choose this function from the Playback Mode Palette and press the 4
button.
1
2
Enter the Q mode and use the four-way controller
(45) to choose the image you want to edit.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select P (Digital
Filter).
Digital Filter
1/2
For modifying images with
a Color filter or Soft
filter.
OK OK
MENU Cancel
Press the 4 button.
The digital filter selection screen appears.
1 B&W filter
2 Sepia filter
3 Color filter
4 Color extraction filter
5 Soft filter
6 Fish-eye filter
7 Brightness filter
5 4 3 2
MENU Cancel
Cance
cel
6
OK
1
OK
7
To Select a B&W Filter, Sepia Filter or Soft Filter
5
Use the four-way controller (23) to choose a digital filter.
6
Press the 4 button.
Editing and Printing Images
4
5
The preview image of the results of the filter effect appears.
A confirmation dialog for overwriting the image appears.
When the selected image is protected, the processed image will be
saved as a new image without the following confirmation dialog
displayed on the screen.
179
7
Use the four-way controller (23)
to select [Overwrite] or [Save as].
Overwrite
original image?
Overwrite
Save as
Cancel
OK
8
OK
Press the 4 button.
The images processed with the filter are saved.
To Select a Color Filter or Color Extraction Filter
5
5
6
Use the four-way controller (23) to choose a digital
filter type.
Use the four-way controller (45) to choose the effect.
Editing and Printing Images
The color filter changes in the following sequence each time you press
the four-way controller (5): Red, Pink, Purple, Blue, Green, Yellow.
The color extraction filter changes in the following sequence each time
you press the four-way controller (5): Red, Green, Blue.
7
Press the 4 button.
A confirmation dialog for overwriting the image appears.
When the selected image is protected, the processed image will be
saved as a new image without the following confirmation dialog
displayed on the screen.
8
Use the four-way controller (23)
to select [Overwrite] or [Save as].
Overwrite
original image?
Overwrite
Save as
Cancel
OK
9
Press the 4 button.
The images processed with the filter are saved.
180
OK
To Select the Brightness or Fish-eye Filter
5
6
Use the four-way controller (23) to choose a digital
filter you want to use.
Use the four-way controller (45)
to adjust the effect.
For the brightness filter, the brightness
increases each time you press the four-way
controller (5) and decreases each time you
press the four-way controller (4).
MENU Cancel
Cance
cel
OK
OK
With the fish-eye filter, pressing the fourway controller to (5) strengthens the effect
and (4) lessens the effect.
7
Press the 4 button.
8
Use the four-way controller (23)
to select [Overwrite] or [Save as].
Overwrite
original image?
Overwrite
Save as
Cancel
OK
9
Press the 4 button.
OK
5
Editing and Printing Images
A confirmation dialog for overwriting the image appears.
When the selected image is protected, the processed image will be
saved as a new image without the following confirmation dialog
displayed on the screen.
The images processed with the filter are saved.
181
Red-eye Compensation
You can correct images where the flash has caused the subject to
appear with red eyes.
• The red-eye compensation function cannot be used on panoramic
images, movies or on images where red eyes cannot be detected on
the camera. An error message appears in Step 4.
• The red-eye compensation function can only be used with still pictures
taken with this camera.
1
2
Enter the Q mode and use the four-way controller
(45) to choose the image you want to correct.
Press the four-way controller (3).
The Playback Mode Palette appears.
5
3
Editing and Printing Images
Use the four-way controller
(2345) to select Z (Red-eye
Compensation).
Red-eye Compensation 1/2
For compensating red-eye.
May not work due to the
condition of the image.
OK OK
MENU Cancel
4
Press the 4 button.
A confirmation dialog for overwriting the image appears.
When the selected image is protected, the corrected image will be
saved as a new image without the following confirmation dialog
displayed on the screen.
5
Use the four-way controller (23)
to select [Overwrite] or [Save as].
Overwrite
original image?
Overwrite
Save as
Cancel
OK
6
Press the 4 button.
The edited image is saved.
182
OK
Adding a Frame (Frame Composite)
This function lets you add a decorative frame to still pictures. There are
90 frames already stored in the camera.
The Frame Composite function cannot be used on images taken with
3:2 (4000×2672), 16:9 (4000×2256) or 1:1 (2992×2992), panoramic
images, movies or images of size h (2048×1536) or smaller. An error
message appears in Step 4.
1
2
Enter the Q mode and use the four-way controller (45)
to choose the image to which you want to add a frame.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Frame Composite
1/2
For composing an image
with a frame. Select Overwrite or Save as to save.
OK OK
MENU Cancel
4
Press the 4 button.
The 9-frame display of the frame selection screen appears.
5
Use the four-way controller
(2345) to choose a frame.
y
OK
5
Editing and Printing Images
Use the four-way controller
(2345) to select N (Frame
Composite).
OK
183
6
Turn the e-dial to the right (y).
The selected frame appears in singleimage display.
You can choose another frame using
either of the following operations.
Four-way
controller (45)
e-dial to the left
(f)
5
7
Press to choose a different
frame.
Turn to return to the 9-frame
display of the frame selection
screen, and then perform Step
5 to choose a different frame.
f
OK
OK
Press the 4 button.
Editing and Printing Images
The frame position and size adjustment
screen appears.
You can adjust the image using either of the
following operations.
Four-way controller Press to adjust the
(2345)
position of the image
e-dial
Turn to make the image
larger or smaller.
8
MENU
OK
Cancel
OK
Press the 4 button.
A confirmation dialog for overwriting the image appears.
When the selected image is protected, the processed image will be
saved as a new image without the following confirmation dialog
displayed on the screen.
9
Use the four-way controller (23)
to select [Overwrite] or [Save as].
Overwrite
original image?
Overwrite
Save as
Cancel
OK
184
OK
10
Press the 4 button.
The edited image is saved with the recorded pixels of h
(2048×1536).
Optional Frames
The optional frames are stored in the built-in memory in the X70. These optional
frames are deleted if the files on the built-in memory are deleted with a computer
or the built-in memory is formatted. To reload the optional frames into the builtin memory, copy the files from the CD-ROM (S-SW87) supplied with the camera.
To Copy Frames
1
2
4
5
6
7
8
If you leave the SD Memory Card in the camera, the frames will be
copied onto the card, not into the camera's built-in memory.
Connect the camera to the computer using the
provided USB cable (I-USB7).
Refer to “Connecting to a Computer” (p.217) for instructions on
connecting the camera to a computer.
When the device detection window opens, click
[Cancel].
Insert the CD-ROM (S-SW87) into the CD-ROM drive.
When the installer window opens, click [EXIT].
If there is not already a “FRAME” folder in the root
directory of the camera (removable disk), create the folder.
Copy the desired files from the FRAME folder in the
root directory of the CD-ROM to the FRAME folder on
the camera (removable disk).
5
Editing and Printing Images
3
Remove the SD Memory Card from the camera.
For information on working with files on your computer, refer to the
instruction manual supplied with the computer.
Disconnect the USB cable from the computer and
camera.
Refer to “Connecting to a Computer” (p.217) for instructions on
disconnecting the cable.
• Frames can be stored both in the built-in memory and on the SD
Memory Cards, but using large numbers of frames may slow down
processing times.
185
To Use a New Frame
The frames downloaded from the PENTAX website or other source can
be used for adding a frame to pictures.
• Extract the downloaded frame and copy it to the FRAME folder in the
built-in memory or the SD Memory Card.
• The FRAME folder is created when the SD Memory Card is formatted
with this camera.
• For more information on downloading, refer to the PENTAX website.
Editing Movies
You can select a frame from the recorded movie to save as a still picture
or divide a movie into two.
5
1
Editing and Printing Images
2
Enter the Q mode and use the four-way controller
(45) to choose the movie you want to edit.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select [ (Movie
Edit).
1/2
Movie Edit
For cutting out a still
image from a movie or
dividing a movie.
OK OK
MENU Cancel
4
Press the 4 button.
The movie edit selection screen appears.
You can proceed to the following steps.
Save as Still Image
Divide Movies
Cancel
OK
186
OK
To Save a Frame from a Movie as a Still Picture
5
6
Select [Save as Still Image] on the movie edit selection
screen.
Press the 4 button.
The screen appears for selecting a frame to be saved as a still picture.
7
Use the four-way controller
(2345) to choose the frame you
want to save.
2
3
4
5
Select the image
to save
1
MENU Cancel
OK
OK
5
Press the 4 button.
The selected frame is saved as a still picture.
To Divide a Movie
5
6
Select [Divide Movies] on the movie edit selection screen.
Press the 4 button.
The screen for choosing the dividing position appears.
7
Use the four-way controller
(2345) to determine the
dividing position.
2
3
4
5
8
Plays or pauses the movie
Stops the movie and returns to the
first frame
Reverses the movie frame by frame
Advances the movie frame by frame
100 - 0042
00:09
Editing and Printing Images
8
Plays or pauses the movie
Stops the movie and returns to the
first frame
Reverses the movie frame by frame
Advances the movie frame by frame
100 - 0042
00:06
Select
Se ct image
ima
mage for
dividing
viding posi
position
sition
divi
1
MENU Cancel
Cance
cel
OK
OK
Press the 4 button.
A confirmation dialog appears.
187
9
Use the four-way controller (2) to
select [Divide].
Divide at this position?
Divide
Cancel
OK
10
OK
Press the 4 button.
The movie is divided at the specified position, the two portions are
saved as new files, and the original one is deleted.
The protected movies cannot be divided.
5
Copying Images and Sound Files
Editing and Printing Images
You can copy images and sound files from the built-in memory to the SD
Memory Card and vice versa. This function can only be selected when
an SD Memory Card has been inserted in the camera.
Make sure that the camera is turned off before inserting or removing the
SD Memory Card.
1
Press the four-way controller (3) in Q mode.
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select p (Image/
Sound Copy).
Image/Sound Copy
1/2
For copying images and
sounds between the builtin
memory and SD memory card.
OK OK
MENU Cancel
3
Press the 4 button.
The copying method selection screen appears.
188
To Copy Files from the Built-in Memory to the SD Memory Card
All the images and sound files in the built-in memory are copied to the
SD Memory Card at once. Before copying the images, make sure that
there is enough space on the SD Memory Card.
4
Use the four-way controller (23)
to select [2}{].
SD
SD
Cancel
OK
5
OK
Press the 4 button.
All the images and sound files are copied.
To Copy Files from the SD Memory Card to the Built-in Memory
5
Selected images and sound files from the SD Memory Card are copied
to the built-in memory one at a time.
Editing and Printing Images
4
5
6
Use the four-way controller (23) to select [{}2].
Press the 4 button.
Use the four-way controller (45)
to select the image/sound file you
want to copy.
100 - 0017
Copy this image/sound
MENU Cancel
7
OK
OK
Press the 4 button.
The selected image/sound file is copied.
• If sound (Voice memo) has been recorded with the image, the sound
file is copied with the image.
• When a file is copied from the SD Memory Card to the built-in memory,
it is assigned a new file name.
189
Setting the Printing Service (DPOF)
DPOF (Digital Print Order Format) is the format for storing print order
data on still pictures captured with a digital camera. Once the print order
data have been stored, the pictures can be printed according to the
DPOF settings using a DPOF-compatible printer or photo processing
lab.
You cannot store print order data for movies.
If the picture already has the date and/or time imprinted on it (p.139), do
not set [Date] O (On) in DPOF settings. If you select O (On), the
imprinted date and/or time may overlap.
Printing a Single Image
5
Set the following items for each image.
Editing and Printing Images
Copies
Date
1
Choose the number of copies up to 99.
Specify whether you want the date inserted on the print or not.
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select r (DPOF).
DPOF
For the print settings.
Useful when printing at a
printing service.
OK OK
MENU Cancel
3
Press the 4 button.
The screen for selecting [Single Image] or [All Images] appears.
190
2/2
4
Use the four-way controller (23)
to select [Single Image].
Single Image
All Images
Cancel
OK
5
OK
Press the 4 button.
The message [DPOF setting for this image] appears.
To make DPOF settings for another image, use the four-way controller
(45) to select another image.
If DPOF settings have already been made for an image, the previous
number of copies and date setting (O or P) will be displayed.
6
Use the four-way controller (23)
to choose the number of copies.
100 - 0017
Use the Green button to choose
whether to insert the date or not.
O(On) The date will be imprinted.
P (Off) The date will not be imprinted.
To continue setting DPOF print order data,
use the four-way controller (45) to choose
another image and repeat Steps 6 and 7.
8
00
OK
OK
100 - 0017
DPOF setting for
this image
Copies
Date
Date
MENU Cancel
01
OK
OK
Editing and Printing Images
Copies
Date
Date
MENU Cancel
7
5
DPOF setting for
this image
Press the 4 button.
The setting is saved and the screen returns to the DPOF menu.
Depending on the printer or printing equipment at the photo processing
lab, the date may not be imprinted on the pictures even if O (On) is
selected in the DPOF settings.
To cancel DPOF settings, set the number of copies to [00] in Step 6 and
press the 4 button.
191
Printing All Images
When you choose the number of copies and whether or not to insert the
date, the settings are applied to all the images stored in the camera.
1
2
Select [All Images] in Step 4 on p.191.
Press the 4 button.
The message [DPOF setting for all images] appears.
3
Choose the number of copies and
whether to insert the date or not.
Refer to Steps 6 and 7 in “Printing a Single
Image” (p.191) for details of how to make
the settings.
DPOF setting for
all images
Copies
Date
01
Date
MENU Cancel
5
Editing and Printing Images
192
4
OK
OK
Press the 4 button.
The settings for all the images are saved and the camera returns to the
DPOF setting screen.
\
• The number of copies specified in the DPOF settings applies to all the
images. Before printing, check that the number is correct.
• Settings for single images are canceled when settings are made with
[All Images].
6
Recording and
Playing Back Sound
Adding a Voice Memo to Images ........... 194
Adding a Voice Memo to Images
You can add a voice memo to your still pictures.
Recording a Voice Memo
1
2
Enter Q mode and use the four-way controller (45) to
choose the still picture to which you want to add a voice
memo.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select \ (Voice
Memo).
Voice Memo
1/2
Attaches sound to images.
Recording is possible till
the memory card is full.
OK OK
MENU Cancel
6
Recording and Playing Back Sound
194
4
Press the 4 button.
Recording starts. You can record a voice
memo continuously for up to 24 hours.
5
100 - 0038
01:31:44
Press the 4 button.
Recording stops.
• A voice memo cannot be added to the image that already has a voice
memo. Delete the old voice memo (p.165) and record a new one.
• A voice memo cannot be added to protected images (p.170).
Playing Back a Voice Memo
e-dial
Q button
Four-way controller
1
Enter Q mode and use the four-way controller (45) to
choose the still picture with the voice memo that you
want to play back.
U appears on images with voice memos in single-image display.
2
Press the four-way controller (2).
100 - 0001
Playback starts.
6
04/02/2009
14:25
The following operations can be performed during playback.
e-dial to the right (y)
Increases the volume
e-dial to the left (f)
Reduces the volume
3
Press the four-way controller (3).
Playback stops.
To Delete a Sound File 1p.165
Recording and Playing Back Sound
Edit
Ed
195
Memo
196
7
Settings
Camera Settings ...................................... 198
Camera Settings
Formatting an SD Memory Card
Formatting will delete all the data on the SD Memory Card.
Be sure to use this camera to format (initialize) an SD Memory Card that
is unused or has been used on other cameras or digital devices.
• Do not remove the SD Memory Card during formatting as this may
damage the card and render it unusable.
• Formatting will delete protected images and any data recorded on the
card with a computer or camera other than this camera.
• SD Memory Cards formatted on a computer or device other than the
camera cannot be used. Be sure to format the card with the camera.
• The built-in memory cannot be formatted except when an error occurs.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
7
2
3
Use the four-way controller (23) to select [Format].
Press the four-way controller (5).
Settings
The [Format] screen appears.
4
Use the four-way controller (2) to
select [Format].
Format
All data deleted
Format
Cancel
OK
5
OK
Press the 4 button.
Formatting starts.
When formatting is completed, the camera returns to A mode or Q
mode.
198
Saving A Mode
If you save the current camera settings in USER mode, you can easily
recall them by simply setting the mode dial to A.
You can save the following settings. Be sure to configure all the settings
you want to save in USER mode before saving.
After saving the settings, you can use them to take pictures by setting
the mode dial to A.
• Capture Mode (either of e/b/c/a)
• Settings on the [A Rec. Mode] menu
• Flash Mode
• Drive Mode
• Focus Mode
• EV Compensation
• W
• Face Priority Mode
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
7
Settings
3
Use the four-way controller (23) to select [Save as
USER].
Press the four-way controller (5).
The [Save as USER] screen appears.
4
Use the four-way controller (2) to
select [Save].
Save as USER
Saves current shooting
settings in USER mode
Save
Cancel
OK
5
OK
Press the 4 button.
The process to save starts.
When the process is complete, the camera returns to A or Q mode.
199
• If the dial is set to A before you save the settings in USER mode,
the capture mode is set to e and all other configurable settings revert
to their default values.
• When the capture mode dial is set to other than e, b, c, or a, you
cannot save the settings in USER mode.
Changing the Settings in A Mode
You can change the settings during shooting in A mode.
If you do not save the settings with [Save as USER], they are not saved
in the camera. Be careful as turning off the power returns to the saved
settings.
Changing the Sound Settings
You can adjust the volume of operation sounds and change the type of
sound.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
7
2
3
Use the four-way controller (23) to select [Sound].
Press the four-way controller (5).
Settings
The [Sound] screen appears.
Sound
Operation Volume
Playback Volume
Start-up Sound
Shutter Sound
Operation Sound
Self-timer Sound
1
1
1
1
MENU
To Change the Operation Volume/Playback Volume
4
200
Use the four-way controller (23) to select [Operation
Volume].
5
Use the four-way controller (45) to adjust the volume.
Set the volume to f to mute the start-up sound, shutter sound,
operation sound, and self-timer sound.
6
Change [Playback Volume] in the same way as in Steps
4 and 5.
To Change the Sound Type
4
5
Use the four-way controller (23) to select [Start-up
Sound].
Press the four-way controller (5).
A pull-down menu appears.
6
Use the four-way controller (23) to select the sound
type.
Choose from [1], [2], [3] or [Off].
7
8
9
Press the 4 button.
Set [Shutter Sound], [Operation Sound] and [Self-timer
Sound] in the same way as in Steps 4 to 7.
Press the 3 button.
Changing the Date and Time
Settings
The screen returns to the [W Setting] menu.
7
You can change the initial date and time settings (p.44). You can also
set the style in which the date appears on the camera.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Date
Adjust].
201
3
Press the four-way controller (5).
The [Date Adjust] screen appears.
Date Adjust
Date Style
mm/dd / yy 24h
Date
01/01/2009
Time
00:00
Settings are completed
MENU Cancel
4
Press the four-way controller (5).
The frame moves to [mm/dd/yy].
Depending on the initial setting or previous setting, [dd/mm/yy] or [yy/
mm/dd] may be displayed.
5
Use the four-way controller (23)
to choose the date and time
display style.
Choose from [mm/dd/yy], [dd/mm/yy] or
[yy/mm/dd].
Date Adjust
Date Style
mm/dd / yy 24h
Date
01/01/2009
Time
00:00
Settings are completed
MENU Cancel
6
Press the four-way controller (5).
The frame moves to [24h].
7
7
Settings
Use the four-way controller (23)
to select [24h] (24-hour display) or
[12h] (12-hour display).
Date Adjust
Date Style
mm/dd / yy 24h
Date
01/01/2009
Time
00:00
Settings are completed
MENU Cancel
8
Press the four-way controller (5).
The frame returns to [Date Style].
9
Press the four-way controller (3).
The frame moves to [Date].
Date Adjust
Date Style
mm/dd / yy 24h
Date
01/01/2009
Time
00:00
Settings are completed
202
MENU Cancel
10
Press the four-way controller (5).
The frame moves to one of the following items depending on the date
style set in Step 5.
Month for [mm/dd/yy]
Day for [dd/mm/yy]
Year for [yy/mm/dd]
The following operations and screens use [mm/dd/yy] as an example.
The operations are the same even if another date style has been
selected.
11
Use the four-way controller (23)
to change the month.
Date Adjust
Date Style
mm/dd / yy 24h
Date
01/01/2009
Time
00:00
Settings are completed
MENU Cancel
12
Press the four-way controller (5).
The frame moves to the day field. Use the four-way controller (23) to
change the day. After changing the day, change the year in the same manner.
13
Change the time in the same way as in Steps 8 to 12.
If you selected [12h] in Step 7, the setting switches between am and
pm corresponding to the time.
Press the 4 button.
Press the four-way controller (3).
Settings
14
15
7
The frame moves to [Settings are completed].
16
Press the 4 button.
The date and time settings are saved and the screen returns to the [W
Setting] menu.
When you press the 4 button in Step 16, the camera clock is reset to
00 seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 00 seconds.
203
Setting the World Time
The date and time selected in “Setting the Date and Time” (p.44) and
“Changing the Date and Time” (p.201) serve as the W (Hometown) date
and time. By using the world time function, you can display the time in a
city other than the Hometown (XDestination). This is useful when taking
pictures in a different time zone.
To Set the Destination
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [World
Time].
Press the four-way controller (5).
The [World Time] screen appears.
4
Use the four-way controller (23)
to select X (Destination).
World Time
Select Time
7
Destination
New York
14:25
Settings
Hometown
New York
14:25
DST
OFF
DST
OFF
MENU
5
Press the four-way controller (5).
The [Destination] screen appears. The city that is currently selected
blinks on the map.
6
Use the four-way controller (45)
to change the Destination city.
Destination
14:25
The current time, location and time
difference of the selected city appear.
City
DST
New York
TimeDif. +0:00
OK OK
MENU Cancel
204
7
8
Use the four-way controller (23) to select [DST].
Use the four-way controller (45) to select O (On) or P (Off).
Select O (On) if the Destination city uses daylight saving time.
9
Press the 4 button.
The [World Time] setting is saved.
10
Press the 3 button twice.
The camera returns to capture status with the current setting.
Select W (Hometown) in Step 4 to set the city and DST setting for the
Hometown city.
To Display the Time of the Destination (Select Time)
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
7
Press the four-way controller (5).
Settings
3
Use the four-way controller (23) to select [World
Time].
The [World Time] screen appears.
4
Use the four-way controller (23)
to select [Select Time].
World Time
Select Time
Destination
London
20:25
Hometown
New York
14:25
DST
DST
OFF
MENU
205
5
Press the four-way controller (5).
A pull-down menu appears.
6
Use the four-way controller (23)
to select X (Destination) or W
(Hometown).
X
W
7
World Time
Select Time
Displays the time of the Destination
city
Displays the time of the Hometown
city
Destination
London
20:25
Hometown
New York
14:25
MENU Cancel
DST
DST
OFF
OK
OK
Press the 4 button.
The setting is saved.
8
Press the 3 button twice.
The camera returns to A mode or Q
mode.
When X (Destination) is selected in Step 6,
the X icon appears on the display to
indicate that the destination date and time
are displayed in A mode.
7
38
04/02/2009
00:25
Changing the Display Language
Settings
You can change the language in which the menus, error messages, etc.
are displayed.
The camera supports the following 20 languages: English, French,
German, Spanish, Portuguese, Italian, Dutch, Japanese, Danish,
Swedish, Finnish, Polish, Czech, Hungarian, Turkish, Greek, Russian,
Thai, Korean and Chinese (traditional and simplified).
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
206
Use the four-way controller (23) to select [Language/
].
3
Press the four-way controller (5).
The [Language/
4
] screen appears.
Use the four-way controller
(2345) to select the language.
5
English
Dansk
Deutsch Svenska
Suomi
Polski
Italiano
Nederlands Magyar
MENU Cancel
OK
OK
Press the 4 button.
The menus and messages are displayed in the selected language.
Changing the Naming Rule of the Folder
You can change the naming rule of the folder for storing images. When
the naming rule is set to the date, pictures are saved in separate folders
by the date they were taken.
Date
Standard
xxx_mmdd (3-digit folder number_month day)
* xxx_ddmm (3-digit folder number_day month) when the date style is set
to [dd/mm/yy]
xxxPENTX (where xxx is the 3-digit folder number)
DCIM
DCIM
100
100PENTX
Next time, taken with
the folder name
setting [Date] again.
(e.g. October 1)
DCIM
100
100PENTX
101
101_0925
• Up to 900 folders can be created.
• Up to 9999 images or sounds can be saved in a folder.
7
Settings
Taken with the folder
Taken with the folder
name setting [Standard]. name setting [Date].
(e.g. September 25)
(e.g. September 25)
100
100PENTX
101
101_0925
102
102_1001
207
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Folder
Name].
Press the four-way controller (5).
A pull-down menu appears.
4
5
Use the four-way controller (23) to select [Standard]
or [Date].
Press the 4 button.
The setting is saved.
Changing the Video Output Format
When you connect the camera to AV equipment, choose the appropriate
video output format (NTSC or PAL) for taking and playing back images.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
7
Settings
2
3
Use the four-way controller (23) to select [Video Out].
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select a video output format.
Choose the video output format to match
the output format of the AV equipment.
Setting
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
MENU Cancel
208
2/3
MSC
NTSC
PAL
5sec.
3min.
OK
OK
5
Press the 4 button.
The setting is saved.
Depending on the country or region, images and sound files may fail to
be played back if the video output format is set different from the one in
use there. If this happens, change the video output format setting.
Connecting the Camera to AV Equipment 1p.173
Video output format of each city 1p.254
Adjusting the Brightness of the Display
You can adjust the brightness of the display.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Brightness
Level].
Use the four-way controller (45)
to adjust the brightness.
Dark
Normal
Bright
2/3
MSC
NTSC
5sec.
3min.
7
Settings
F
G
H
Setting
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
MENU Exit
4
Press the 3 button.
The camera returns to A mode or Q mode.
The display appears with the set brightness.
209
Using the Power Saving Function
You can save battery power by setting the display to dim automatically
when no operation is performed for a fixed time. After the power saving
function has been activated, the display returns to the ordinary
brightness by pressing any of the buttons.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Power
Saving].
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the time until the camera
enters power saving mode.
Choose from [2min.], [1min.], [30sec.],
[15sec.], [5sec.] or [Off].
7
Setting
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
MENU Cancel
Settings
5
2/3
2min.
1min.
30sec.
15sec.
5sec.
Off
OK
OK
Press the 4 button.
The setting is saved.
• Power Saving does not function in the following situations:
- while taking pictures in continuous shooting mode
- in the playback mode
- during movie recording/playback
- while the camera is connected to a computer
- when using the AC adapter
- while a menu is being displayed
- while using the VIDEO output
- when switching to the viewfinder using the EVF/LCD button
• When no operation is performed after the camera is turned on, Power
Saving is activated only after 15 seconds elapse even if [5sec.] is set.
210
Setting Auto Power Off
You can set the camera to turn off automatically when no operation is
performed for a fixed time.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Auto Power
Off].
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the time until the camera
turns off automatically.
Choose from [5min.], [3min.] or [Off].
Setting
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
MENU Cancel
5
Press the 4 button.
Auto Power Off does not function in the following situations:
- while taking pictures in the continuous shooting mode
- while recording a movie
- during a slideshow or movie/sound playback
- while the camera is connected to a computer
5min.
3min.
Off
OK
OK
7
Settings
The setting is saved.
2/3
MSC
NTSC
211
Setting the Quick Zoom Function
You can set whether to use [Quick Zoom] to magnify playback images to
a maximum of 10x by simply turning the e-dial to the right during
playback of images in Q mode.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Quick
Zoom].
Use the four-way controller (45)
to select O (On) or P (Off).
O(On): The Quick Zoom is available.
P (Off): The Quick Zoom is not available.
Setting
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
MENU Exit
4
7
Settings
212
Press the 3 button.
The camera returns to A mode or Q mode.
2/3
MSC
NTSC
5sec.
3min.
Setting the Guide Display
Set whether to display the guides in playback mode or when setting the
capture mode.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23)
to select [Guide Display].
Setting
3/3
Guide Display
Reset
Delete all
Format
MENU Exit
3
Use the four-way controller (45) to select O (On) or P (Off).
O(On): The mode guides are displayed.
P (Off): The mode guides are not displayed.
4
Press the 3 button.
The camera returns to A mode or Q mode.
7
You can choose the start-up screen displayed when the camera is
turned on.
You can choose any of the following images as the start-up screen:
• The Guide Display Start-up Screen showing a guide to the shooting
modes and buttons
• One of the 3 PENTAX logos
• One of your own images (compatible images only)
1
Settings
Changing the Start-up Screen
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
213
2
Use the four-way controller
(2345) to select ^ (Start-up
Screen).
Start-up Screen
2/2
For setting a captured
image as the Start-up
Screen.
OK OK
MENU Cancel
3
Press the 4 button.
The image selection screen appears.
4
Use the four-way controller (45)
to choose the image for the startup screen.
Only images suitable for the start-up screen
are displayed. You can also choose one of
the 3 PENTAX logos or the Guide Display
Start-up Screen already stored in the
camera.
5
100 - 0017
MENU Cancel
OK
OK
Press the 4 button.
The setting is saved.
7
Settings
214
• Once the start-up screen has been set, it will not be deleted even if the
original image is deleted or the SD Memory Card is formatted.
• Select [Off] to hide the start-up screen.
• The start-up screen is not displayed when you turn the camera on in
the playback mode.
• Images or movies taken at 16:9 , 3:2 , 1:1 and F (Digital Panorama
mode) cannot be used for the start-up screen.
Resetting to Default Settings (Reset)
You can reset the camera settings to their defaults. Refer to “Default
Settings” (p.249) for the reset settings.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Reset].
Press the four-way controller (5).
The [Reset] screen appears.
4
Use the four-way controller (2) to
select [Reset].
Reset
Reset to
initial setting?
Reset
Cancel
OK
5
OK
Press the 4 button.
The settings return to the defaults.
Settings
The following settings are not affected by resetting:
- Date Adjust
- World Time
- Language/
- Video Out
7
215
Memo
216
8
Connecting to a
Computer
Setting Up Your Computer ..................... 218
Connecting to a Windows PC ................ 226
Connecting to a Macintosh .................... 234
Setting Up Your Computer
By installing the software included on the provided CD-ROM on your
computer and connecting the camera to your computer with the USB
cable, you can transfer images and movies captured with your camera
to the computer and then display and manage them. This section
explains how to install the provided software and the other necessary
preparations for enjoying the captured pictures and movies on your
computer.
Provided Software
The following software is included in the provided CD-ROM (S-SW87).
Windows
• Image viewing/managing/editing software “ACDSee for PENTAX 3.0”
(Nine languages: English, French, German, Spanish, Italian, Russian,
Chinese [traditional and simplified], Korean, Japanese)
Macintosh
• Image viewing/managing software “ACDSee 2 for Mac”
(Six languages: English, French, German, Spanish, Italian, Japanese)
8
Connecting to a Computer
218
It is recommended to use the optional AC adapter kit K-AC64 when the
camera is connected to the computer (p.33). If the battery runs out of
power while images are being transmitted to the computer, the image
data may be lost or damaged.
System Requirements
The following system requirements must be met for you to fully enjoy the
images and movies captured with the camera on your computer.
Windows
OS
CPU
Memory
Hard Disk Space
Others
Windows 2000, Windows XP or Windows Vista
• The OS must be preinstalled and updated to the latest
version.
Pentium III or higher
256 MB minimum (512 MB or more recommended)
100 MB minimum (1 GB or more recommended)
CD-ROM drive
USB port as standard equipment
Internet Explorer 5.0 or later
DirectX 9.0 or later and Windows Media Player 9.0 or later (for
playing movies)
* Operation is not guaranteed on all computers meeting the system
requirements.
* The system requirements describe the minimum environment for playing and
editing movies.
Windows 95, Windows 98, Windows 98SE, Windows Me and Windows
NT are not supported.
• Internet Explorer
http://www.microsoft.com/windows/products/winfamily/ie/
default.mspx
• Windows Media Player
http://www.microsoft.com/windows/products/winfamily/mediaplayer/
default.mspx
• DirectX
http://www.microsoft.com/windows/directx/default.mspx
8
Connecting to a Computer
The versions of Internet Explorer, Windows Media Player and DirectX
required for using “ACDSee for PENTAX 3.0” are not included in the
provided CD-ROM (S-SW87). Visit the following sites to download the
necessary items and install/update them on your computer.
219
Macintosh
OS
CPU
Memory
Hard Disk space
Others
Mac OS X (Ver.10.3-10.5)
• The OS must be preinstalled and updated to the latest
version.
* When you connect the camera to a Macintosh without using
the provided software, Mac OS X (Ver.10.1.2-10.5) is
available.
Power Macintosh 233 MHz or higher
8 MB minimum
6 MB minimum
CD-ROM drive
USB port as standard equipment
QuickTime 4.0 or later
* Operation is not guaranteed on all computers meeting the system requirements.
Installing the Software
Windows
Install the image viewing/managing/editing software (ACDSee for
PENTAX 3.0).
• Make sure your Windows PC meets the system requirements before
installing the software.
• When multiple accounts have been set up in Windows 2000, Windows
XP or Windows Vista, log on with an account that has administrative
rights before installing the software.
8
Connecting to a Computer
220
1
2
Turn your Windows PC on.
Insert the provided CD-ROM into the CD-ROM drive.
The language selection screen appears.
If you are using Windows Vista
When the [AutoPlay] screen appears, display the language selection
screen following the steps below.
1) Click [Run setup.exe].
2) Click [Allow].
If the language selection screen does not appear
Display the language selection screen following the steps below.
1) Double-click [My Computer] on the desktop.
2) Double-click the [CD-ROM drive (S-SW87)] icon.
3) Double-click the [Setup.exe] icon.
3
Choose a language from the
displayed screen.
The “ACDSee for PENTAX 3.0”
installation screen appears.
4
Click [Install].
The setup screen appears.
Follow the on-screen guidance to input
registration information and install the
software.
8
Connecting to a Computer
221
5
Click [Finish].
“ACDSee for PENTAX 3.0” installation
is complete.
6
Click [Exit] on the installation screen.
The window is closed.
7
Reboot your Windows PC.
Go to “Product Registration on the Internet” (p.224).
Macintosh
Install the image viewing/managing software (ACDSee 2 for Mac).
1
2
3
4
8
Connecting to a Computer
222
Turn your Macintosh on.
Insert the provided CD-ROM into the CD-ROM drive.
Double-click the CD-ROM (S-SW87) icon.
Double-click the [ACDSee Install] icon.
The language selection screen appears.
When the [Master Installer] icon appears, double-click it to display the
language selection screen.
5
Choose a language from the
displayed screen.
The “ACDSee 2 for Mac” installer
screen appears.
6
Click [Install].
The setup screen appears.
Follow the on-screen guidance to input
registration information and install the
software.
7
8
When the screen shown on the
right appears, click [Yes].
Click [Close].
“ACDSee 2 for Mac” installation is
complete.
Click [Exit] on the installation screen.
The window is closed.
Connecting to a Computer
9
8
223
Product Registration on the Internet
In order to better serve you, we request that you complete the product
registration.
If your computer is connected to the
Internet, please click [Product
Registration] on the setup screen after the
language selection screen is displayed.
The world map screen shown on the right
for Internet Product Registration is
displayed. Click the displayed country or
region and then follow the instructions to
register your product.
Only customers in countries and regions displayed on the software
installation screen can register their products on the Internet Product
Registration.
Setting the USB Connection Mode
Set the device to which the camera is connected with the USB cable.
Make sure to set the USB Connection mode before connecting your
camera to the computer. You cannot perform the following setting if the
camera is connected to your computer with the USB cable.
8
Connecting to a Computer
224
1
2
Turn your camera on.
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
3
Use the four-way controller (23) to select [USB
Connection].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23)
to select [MSC].
Setting
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
MENU Cancel
6
2/3
MSC
PTP
5sec.
3min.
OK
OK
Press the 4 button.
The setting is saved.
Go to the following pages depending on your computer.
Connecting to a Windows PC (p.226)
Connecting to a Macintosh (p.234)
MSC (Mass Storage Class) and PTP (Picture Transfer Protocol)
MSC (Mass Storage Class)
A general-purpose driver program that handles devices connected to the
computer via USB as a memory device. Also indicates a standard for
controlling USB devices with this driver.
By simply connecting a device that supports USB Mass Storage Class,
you can copy, read, and write files from a computer without installing a
dedicated driver.
Unless otherwise specified, select MSC when connecting the X70 to
your computer.
8
Connecting to a Computer
PTP (Picture Transfer Protocol)
A protocol that allows transfer of digital images and control of digital
cameras via USB, standardized as ISO 15740.
You can transfer image data between devices that support PTP without
installing a device driver.
225
Connecting to a Windows PC
Connecting the Camera and a Windows PC
Connect your camera to the Windows PC using the provided USB cable
(I-USB7).
1
2
3
Turn your Windows PC on.
Turn your camera off.
Connect your camera to the Windows PC using the USB
cable.
Connect the terminal of the USB cable with
pointing toward the 4
on the PC/AV terminal on the side of the camera.
8
Connecting to a Computer
226
4
Turn your camera on.
The “Device Detector” screen appears.
If the “Device Detector” screen does not appear, follow the steps in
“When the “Device Detector” screen does not appear” (p.228).
The power lamp is lit while the camera is connected to a PC, whereas it
blinks while the card is being accessed.
It is recommended to use the optional AC adapter kit K-AC64 when the
camera is connected to the computer (p.33). If the battery runs out of
power while images are being transmitted to the computer, the image
data may be lost or damaged.
Transferring Images
Transfer the images captured with the camera to your Windows PC.
If there is no SD Memory Card in the camera, the images stored in the
built-in memory will be transferred to your Windows PC.
5
6
7
Confirm that [Acquire images from
the device with ACDSee] is
checked and click [OK].
Click [Next].
Select an image to copy and click
[Next].
8
Specify [File names] and
[Destination folder], and click
[Next].
The images are copied to your Windows
PC.
Connecting to a Computer
8
227
9
Click [Finish].
The “ACDSee for PENTAX 3.0” starts.
When the “Device Detector” screen does not appear
5
Double-click the [ACDSee for
PENTAX 3.0] icon on the desktop.
6
Click [My Computer].
7
Double-click [Removable Disk].
8
Connecting to a Computer
228
If the SD Memory Card has a volume label, the volume label name
appears instead of [Removable Disk]. A new unformatted SD Memory
Card may show the manufacturer name or model number.
8
Double-click the [DCIM] folder.
Images are stored in folders named by the
shooting date (“XXX_0202” for February 2.
“XXX” is a three-digit number.).
If [Standard] is selected for [Folder Name] in
the [W Setting] menu, a folder named
“XXXPENTX” (XXX is a three-digit folder
number) is displayed and images are stored here.
9
10
Select the folders you want to copy
to the Windows PC.
Select [Copy To Folder...] from the
[Edit] menu.
The “Copy Files” screen appears.
11
Specify the destination folder and
click [OK].
8
Connecting to a Computer
The images are copied to your Windows
PC.
229
Disconnecting the Camera from Your Windows PC
1
Double-click the
[Safely
Remove Hardware] icon in the
task bar.
The “Safely Remove Hardware” screen appears.
2
Select [USB Mass Storage Device]
and click [Stop].
The “Stop a Hardware device” screen
appears.
3
Select [USB Mass Storage Device]
and click [OK].
A message appears indicating that the
hardware can be safely removed.
4
8
Connecting to a Computer
230
5
Click [OK].
Disconnect the USB cable from your Windows PC and
the camera.
• If the camera (removable disk) is being used by an application such as
“ACDSee for PENTAX 3.0”, the camera cannot be disconnected until
the application is closed.
• The camera will automatically switch to the Playback Mode when the
USB cable is disconnected from your Windows PC or the camera.
Starting “ACDSee for PENTAX 3.0”
“ACDSee for PENTAX 3.0” lets you view, edit, manage, search for,
share, and print images.
1
Double-click the [ACDSee for PENTAX 3.0] icon on the
desktop.
ACDSee starts and the main browser window appears.
ACDSee Browser Interface
A
B
C
F
E
D
G
A Menu bar
Provides access to the various menu commands.
B Toolbar
Provides quick access to frequently used tasks and functions.
C Folders pane
Displays the configuration of folders in your computer. When you browse
a folder, the contents of the folder appear in the File List pane.
8
Connecting to a Computer
H
* The screen shown is an example with the default settings.
231
D Preview pane
Displays a preview of the image or media file currently selected in the
File List pane. You can change the size of the preview image or play
back the media file.
E File List pane
Displays the contents of the selected folder or the results of the most
recent search (the file or folder that matches the search item). It is the
only pane that always appears in the browser and it cannot be hidden or
closed.
F Category pane
Displays a list of categories and priorities. By dragging and dropping files
from the File List pane to here, you can set category and priority for files.
G Image Basket pane
Displays files selected in the File List pane. By choosing images and files
and putting them in the Image Basket pane, you can use the editing and
creating functions on images from different folders and categories.
H Status bar
Displays information and properties for the selected file.
Viewing Images
1
8
Connecting to a Computer
232
Select and click the folder containing the image you
want to view in the Folders pane of the ACDSee
browser.
Images are displayed in the File List pane.
2
Select and double-click the image you want to view in
the File List pane.
The selected image is displayed with
the viewer.
With the viewer, you can enlarge/
reduce the display size of the image or
edit the image. You can also play back
movies or sound files.
ACDSee Quick View
The image is displayed on the “ACDSee
Quick View” screen if you double-click the
image file directly from the browser without
starting ACDSee. (You cannot play back
or display the file with ACDSee Quick View
even if you double-click a movie or sound
file.)
You can also enlarge/reduce the display
size of the image on the “ACDSee Quick
View” screen.
Click [Full Viewer] on the “ACDSee Quick View” screen to switch the
display to the viewer.
Click [Photo Manager] to switch the display to the ACDSee browser.
Details on How to Use “ACDSee for PENTAX 3.0”
You can find more information on how to use “ACDSee for PENTAX 3.0”
by using the help pages.
1
Click the [?] icon at the top right of the screen.
The help screen appears.
2
Double-click the desired topic.
The explanation is displayed.
8
Connecting to a Computer
233
Connecting to a Macintosh
Connecting the Camera and a Macintosh
Connect your camera to the Macintosh using the provided USB cable
(I-USB7).
1
2
3
Turn your Macintosh on.
Turn your camera off.
Connect your camera to the Macintosh using the USB
cable.
Connect the terminal of the USB cable with
pointing toward the 4
on the PC/AV terminal on the side of the camera.
8
Connecting to a Computer
234
4
Turn your camera on.
The camera is recognized as [NO_NAME] on the
desktop.
• If the SD Memory Card has a volume label, the volume label name
appears instead of [NO_NAME]. A new unformatted SD Memory Card
may show the manufacturer name or model number.
• The power lamp is lit while the camera is connected to a Macintosh,
whereas it blinks while the card is being accessed.
It is recommended to use the optional AC adapter kit K-AC64 when the
camera is connected to the computer (p.33). If the battery runs out of
power while images are being transmitted to the computer, the image
data may be lost or damaged.
Transferring Images
Transfer the images captured with the camera to your Macintosh.
If there is no SD Memory Card in the camera, the images stored in the
built-in memory will be transferred to your Macintosh.
5
Specify a save location, make
sure that [Launch ACDSee] is
checked, and click [Download].
After images are copied to your
Macintosh, the “ACDSee 2 for Mac”
starts.
When [Delete images from device] is checked, images are deleted from
the camera after transfer is complete.
Disconnecting the Camera from Your Macintosh
1
Drag [NO_NAME] on the desktop to the trash.
If the SD Memory Card has a volume label, drag the icon of that name
to the trash.
Disconnect the USB cable from your Macintosh and the
camera.
• If the camera (removable disk) is being used by an application such as
“ACDSee 2 for Mac”, the camera cannot be disconnected until the
application is closed.
• The camera will automatically switch to the Playback Mode when the
USB cable is disconnected from your Macintosh or the camera.
Connecting to a Computer
2
8
235
Starting “ACDSee 2 for Mac”
“ACDSee 2 for Mac” lets you display and manage images.
1
2
Double-click the [ACDSee] folder inside the
[Applications] folder.
Double-click the [ACDSee 2 for Mac] icon.
ACDSee starts and the main browser window appears.
ACDSee Browser Interface
A
B
C
D
E
F
G
8
Connecting to a Computer
236
A Menu bar
Provides access to the various menu commands.
B Toolbar
Provides quick access to frequently used tasks and functions.
C Folders pane
Displays the configuration of folders in your Macintosh. When you
browse a folder, the contents of the folder appear in the File List pane.
D Preview pane
Displays a preview of the image or media file currently selected in the
File List pane. You can change the size of the preview image or play
back the media file.
E Favorites pane
You can add frequently used items (folders, etc.).
F File List pane
Displays the contents of the selected folder or the results of the most
recent search (the file or folder that matches the search item). It is the
only pane that always appears in the browser and it cannot be hidden or
closed.
G Status bar
Displays information and properties for the selected file.
Viewing Images
1
Select and click the folder containing the image you
want to view in the Folders pane of the ACDSee
browser.
Images are displayed in the File List pane.
2
Select and double-click the image you want to view in
the File List pane.
The selected image is displayed.
You can enlarge/reduce the display
size of the image.
8
You can find more information on how to use “ACDSee 2 for Mac” by
using the help pages.
1
Select [ACDSee 2 for Mac] from [Help] on the menu bar.
The help screen appears.
2
Click the desired topic.
Connecting to a Computer
Details on How to Use “ACDSee 2 for Mac”
The explanation is displayed.
237
Memo
238
9
Appendix
Functions Available for Each
Shooting Mode ..................................... 240
Messages ................................................. 245
Troubleshooting ...................................... 247
Default Settings ....................................... 249
List of World Time Cities ........................ 254
Optional Accessories ............................. 255
Main Specifications ................................ 256
WARRANTY POLICY ............................... 260
Index ......................................................... 265
Functions Available for Each Shooting
Mode
Yes: Can be set.
9
Appendix
240
No: Cannot be set.
Shooting Mode I
Function
Yes
Face Priority On
Yes
Smile Capture
No
Face Priority Off
Yes
Blink Detection
Yes
, (Auto)
Yes
a (Flash Off)
Yes
b (Flash On)
Flash
Yes
c (Auto + Red-eye)
Mode
Yes
d (Flash On + Red-eye)
Yes
G (Slow-speed Sync)
Yes
H (Slow-speed Sync+Red-eye)
Yes
9 (Standard)
Yes
M/
H (Continuous Shooting (L/M/H))
L /
Yes
Drive g (Self-timer)
Mode Z (2 Sec. Self-timer)
Yes
Yes
k (Interval Shoot)
Yes
a (Auto Bracket)
Yes
= (Standard)
Yes
q (Macro)
Yes
(1cm Macro)
Focus
Mode s (Infinity)
Yes
Yes
\ (Manual Focus)
No
(AF Area Selection)
No*8
Image Tone
Yes
Recorded Pixels
Yes
Quality Level
No*2
White Balance
Yes
Sensitivity
Yes
ISO Corction in AUTO
No*3
EV Compensation
No*4
Focusing Area
AF
Yes
Auto Macro
Setting
Yes
Focus Assist
No*5
AE Metering
Yes
Flash Exp. Comp.
Yes
Bright Area Adj.
Yes
Shake Reduction *1
Yes*6
Zoom
No*7
Sharpness
No*7
Saturation (Tone Adjustment)
No*7
Contrast
Yes
Date Imprint
c
e
b
c
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8 Yes
Yes No*9
Yes
Yes
No*2 Yes
Yes No*10
Yes No*26
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*5 Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes Yes*11
No*7 Yes
No*7 Yes
No*7 Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes Yes*23
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
\
a
9
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Yes
No
Yes
Yes
No
No
Yes
Yes
No
No
No
No
No*12
No*13
No*14
No*2
No*10
No
No*3
No*4
No*15
No*15
No*5
No*3
No*24
No*15
Yes*16
No*7
No*7
No*7
No
H
I
P
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8
Yes
Yes
No*2
Yes
Yes
Yes
Yes
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8
Yes
Yes
No*2
Yes
Yes
Yes
Yes
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8
Yes
Yes
No*2
Yes
Yes
Yes
Yes
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
C
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8
Yes
Yes
No*2
Yes
Yes
Yes
Yes
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8
No*19
Yes
No*2
Yes
Yes
Yes
Yes
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
A Shooting Mode
Yes
Yes
Yes
Yes
No
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Function
Face Priority On
Smile Capture
Face Priority Off
Blink Detection
, (Auto)
a(Flash Off)
b (Flash On)
Flash
c (Auto + Red-eye)
Mode
d (Flash On + Red-eye)
G (Slow-speed Sync)
H (Slow-speed Sync + Red-eye)
9 (Standard)
M/
H (Continuous Shooting (L/M/H))
L /
Drive
g (Self-timer)
Mode
Z (2 Sec. Self-timer)
k (Interval Shoot)
a (Auto Bracket)
= (Standard)
q (Macro)
Focus
(1cm Macro)
Mode
s (Infinity)
\ (Manual Focus)
(AF Area Selection)
Image Tone
Recorded Pixels
Quality Level
White Balance
Sensitivity
ISO Corction in AUTO
EV Compensation
Focusing Area
AF
Auto Macro
Setting
Focus Assist
AE Metering
Flash Exp. Comp.
Bright Area Adj.
Shake Reduction *1
Zoom
Sharpness
Saturation (Tone Adjustment)
Contrast
Date Imprint
9
Appendix
C
Yes
Yes
Yes
No
No
Yes
No
No
No
No
No
Yes
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*17
Yes
No*10
No
Yes
Yes*18
Yes
No
No*5
Yes
Yes
Yes
Yes*16
Yes
Yes
Yes
No
241
9
Appendix
242
Shooting Mode
Function
Face Priority On
Smile Capture
Face Priority Off
Blink Detection
, (Auto)
a (Flash Off)
b (Flash On)
Flash
c (Auto + Red-eye)
Mode
d (Flash On + Red-eye)
G (Slow-speed Sync)
H (Slow-speed Sync+Red-eye)
9 (Standard)
M/
H (Continuous Shooting (L/M/H))
L /
g (Self-timer)
Drive
Mode Z (2 Sec. Self-timer)
k (Interval Shoot)
a (Auto Bracket)
= (Standard)
q (Macro)
(1cm Macro)
Focus
Mode s (Infinity)
\ (Manual Focus)
(AF Area Selection)
Image Tone
Recorded Pixels
Quality Level
White Balance
Sensitivity
ISO Corction in AUTO
EV Compensation
Focusing Area
AF
Auto Macro
Setting
Focus Assist
AE Metering
Flash Exp. Comp.
Bright Area Adj.
Shake Reduction *1
Zoom
Sharpness
Saturation (Tone Adjustment)
Contrast
Date Imprint
B
n
Q
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8
Yes
Yes
No*2
Yes
Yes
Yes
Yes
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
Yes
Yes
Yes
Yes
No
Yes
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8
No*25
Yes
No*2
Yes
Yes
Yes
Yes
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8
Yes
Yes
No*2
Yes
Yes
Yes
Yes
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8
Yes
Yes
No*2
Yes
Yes
Yes
Yes
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
R
Y
K
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8
Yes
Yes
No*2
Yes
Yes
Yes
Yes
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8
Yes
Yes
No*2
Yes
Yes
Yes
Yes
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8
Yes
Yes
No*2
Yes
Yes
Yes
Yes
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
F Shooting Mode
N
B
E
K
X
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*19
Yes
Yes
Yes
Yes
Yes
Yes*18
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8
Yes
Yes
No*2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8
Yes
Yes
No*2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*8
Yes
Yes
No*2
Yes
Yes
Yes
Yes
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*21 No*22
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*20
Yes
Yes
No*4
Yes
Yes
No*5
Yes
Yes
Yes
Yes
No*7
No*7
No*7
Yes
Function
Face Priority On
Smile Capture
Face Priority Off
Blink Detection
, (Auto)
a(Flash Off)
b (Flash On)
Flash
c (Auto + Red-eye)
Mode
d (Flash On + Red-eye)
G (Slow-speed Sync)
H (Slow-speed Sync + Red-eye)
9 (Standard)
M/
H (Continuous Shooting (L/M/H))
L /
g (Self-timer)
Drive
Mode
Z (2 Sec. Self-timer)
k (Interval Shoot)
a (Auto Bracket)
= (Standard)
q (Macro)
(1cm Macro)
Focus
Mode
s (Infinity)
\ (Manual Focus)
(AF Area Selection)
Image Tone
Recorded Pixels
Quality Level
White Balance
Sensitivity
ISO Corction in AUTO
EV Compensation
Focusing Area
AF
Auto Macro
Setting
Focus Assist
AE Metering
Flash Exp. Comp.
Bright Area Adj.
Shake Reduction *1
Zoom
Sharpness
Saturation (Tone Adjustment)
Contrast
Date Imprint
9
Appendix
S
Yes
Yes
Yes
Yes
No
Yes
No
No
No
No
No
Yes
No
Yes
Yes
Yes
No
No
No
No
Yes
No
No
No*8
Yes
Yes
No*2
243
*1
*2
*3
*4
*5
*6
*7
*8
*9
*10
*11
*12
*13
*14
9
Appendix
244
Movie SR is used for movies, while
Shake Reduction is used for still
pictures
Fixed to F
Fixed at ±0.0
Fixed to J (Multi)
Fixed to L (Multi-segment metering)
Flowers cannot be detected when
using Digital Zoom or Intelligent Zoom.
Fixed as Standard
Fixed at Natural
Fixed to f
Fixed at [AUTO]
Only optical zoom is available
Fixed at Bright
Fixed to E
Fixed to D (Better)
*15 Fixed to O (On)
*16 Only optical zoom and Digital Zoom
are available
*17 Fixed to C (Best)
*18 W (Automatic Tracking) is not
available.
*19 Fixed to h
*20 The sensitivity is fixed at its minimum
setting
*21 Fixed to h for individual pictures,
fixed to f for composite images
*22 Fixed to i for individual pictures
*23 [AUTO] cannot be selected.
*24 Fixed to P (Off)
*25 Fixed to i
*26 Fixed at 50-6400
Messages
Messages such as the following may appear on the display during
camera operation.
Message
9
Appendix
Description
The battery is exhausted. Charge the battery using the
Battery depleted
battery charger (p.29).
The SD Memory Card is full and no more images can be
saved.
Insert a new SD Memory Card or delete unwanted images
Memory card full
(p.34, p.164).
Change the recorded pixels or quality level of recorded
images and try again (p.176).
Shooting and playback are impossible due to a problem
Memory card error
with the SD Memory Card. You may be able to display or
copy the images on the card using a computer.
The built-in memory is
The data within the built-in memory are damaged. Format
not formatted
the built-in memory.
The SD Memory Card you have inserted is unformatted or
has been formatted on a computer or other device and is
Card is not formatted
not compatible with this camera. Format the SD Memory
Card in the camera (p.198).
Card locked
The SD Memory Card is write-protected (p.36).
This message occurs when the camera fails to compress an
Compression error
image. Change the quality level or recorded pixels of the
image and try shooting or saving it again.
No image/sound
There are no image/sound files on the SD Memory Card.
This message appears when the internal temperature of the
Movie recording stopped camera has exceeded normal operating limits while
recording a movie.
This message appears when deleting an image or sound
Deleting
file.
You are trying to play back an image or sound in a format
Camera cannot play
not supported by this camera. You may be able to play it
this image and sound
back on another brand of camera or on your computer.
The largest file number (9999) has been assigned to an
Image folder
image in the largest folder number (999) and no more
cannot be created
images can be saved. Insert a new SD Memory Card or
format the card (p.198).
Protected
The image or sound file you are trying to delete is protected.
245
Message
Data being recorded
Data being processed
Built-in memory full
No image to be
processed
This image/sound
cannot be processed
No card in the camera
The built-in memory is
not enough to copy
images/sounds
Cannot process
correctly
Display image/sound
from built-in memory
Please pop-up the flash.
Description
Displayed when you try to switch to Q mode while an
image is still being recorded, or when the protect setting or
DPOF setting is being changed. It disappears after the
image is recorded or the setting is changed.
Displayed when the camera takes more than five seconds
to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Displayed if the built-in memory is full when saving a file.
Displayed when there are no images or sound files.
Displayed for files that cannot be processed.
Displayed when no SD Memory Card is inserted.
Displayed when there is insufficient built-in memory to
perform copying.
Displayed when Red-eye Compensation processing fails.
Displayed when the camera enters the built-in memory
display.
Press the b button to use the flash.
Appears when the power is turned on with the lens cap
Please confirm the lens
attached.
cap is removed.
Turn on the power again after removing the lens cap.
9
Appendix
246
Troubleshooting
Problem
Cause
Remedy
The battery is not
installed
9
Appendix
Check if a battery is installed. If not,
install a battery.
Check orientation of the battery. Reinsert
The camera will
The battery is installed
the battery according to the +- symbols
not turn on
incorrectly
in the battery compartment (p.30).
The battery is
Charge the battery.
exhausted
The camera is
The display is off when the camera is
connected to a
connected to a computer.
computer
No image appears
The camera is
The display is off when the camera is
on the display
connected to a TV
connected to a TV.
The viewfinder is
Press the EVF/LCD button.
selected
The brightness level of
Adjust the brightness level in [Brightness
the display is set too
Level] in the [W Setting] menu (p.209).
dark
When the Power Saving function is on,
The display is
the display automatically darkens after a
hard to see
certain amount of time. Press a button to
Power Saving function
return to the normal brightness level.
is on
Select [Off] in [Power Saving] in the
[W Setting] menu to turn the Power
Saving function off (p.210).
Pictures cannot be taken while the flash
The flash is charging is charging. Wait until charging is
finished.
The shutter will
There is no available
Insert an SD Memory Card with available
not release
space on the SD
space or delete unwanted images (p.34,
Memory Card or in the
164).
built-in memory
Recording
Wait until recording is finished.
The subject is too far
The picture is dark
The picture becomes dark if the subject is
away in a dark
when using the
too far away. Take pictures within the
environment, such as
flash
specified flash range.
a night scene
247
Problem
Cause
The subject is difficult
to focus on with
autofocus
The subject is not
in focus
The subject is not in
the focusing area
9
Appendix
248
The flash is not
popped up
The flash mode is set
to a (Flash Off)
The Drive Mode is set
to Continuous
Shooting (L),
The flash does not Continuous Shooting
(M), Continuous
discharge
Shooting (H) or l
(Auto Bracket); the
Focus Mode is set to
s (Infinity); and the
Capture mode is set to
d (Movie), S
(Fireworks) or n
(Stage Lighting).
The flash is not
The flash is not set
popped up
Remedy
The camera may have difficulty in
focusing on such subjects as: low
contrast subjects (a white wall, a blue
sky, etc.), dark subjects, finely-patterned
objects, rapidly-moving objects. It is also
difficult to get proper focus when
shooting through a window or a net. Try
shooting using the focus lock (p.66), or a
(Manual Focus) (p.114).
Locate the desired subject in the focus
frame (focusing area) in the center of the
display. If it is difficult to do so, first lock
the focus on the desired subject (focus
lock), and then move the camera to
recompose. You can also take photos by
setting the focusing area on your subject
in [AF Area Selection] mode.
Pop up the flash.
Set to Auto or b (Flash On) (p.110).
The flash does not discharge in these
modes.
Pop up the flash.
Very occasionally, static electricity may cause camera malfunction. In
this case, remove the battery and install it again. If the camera is then
working properly, normal condition is restored and you can continue
using the camera.
Default Settings
The table below lists the factory default settings.
The meaning of the indications for menu items with a default setting is
explained below.
Last Memory Setting
Yes : The current setting (last memory) is saved when the camera is
turned off.
No : The setting returns to the default setting when the camera is
turned off.
*
: The setting depends on the [Memory] setting (p.147).
— : N/A
Reset Setting
Yes : The setting returns to the default setting with the Reset
function (p.215).
No : The setting is saved even after reset.
— : N/A
[ARec. Mode] Menu Items
Item
Bright
E (4000×3000)
D (Better)
F (Auto)
AUTO (50-800)
50-800
J (Multiple)
O (On)
O (On)
L (Multi-segment)
±0.0
F (1280×720/15fps)
O (On)
P (Off)
O (On)
Last
Memory
Setting
Yes
Yes
Yes
*
*
*
Yes
Yes
Yes
*
Yes
Yes
Yes
Yes
Yes
Reset
Page
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
p.119
p.120
p.122
p.123
p.125
p.127
p.116
p.117
p.118
p.128
p.129
p.145
p.146
p.130
p.132
9
Appendix
Image Tone
Recorded Pixels
Quality Level
White Balance
Sensitivity
ISO Corction in AUTO
Focusing Area
AF
Auto Macro
Setting
Focus Assist
AE Metering
Flash Exp. Comp.
Recorded Pixels
Movie
Movie SR
Bright Area Adj.
Shake Reduction
Default Setting
249
Item
Interval
Number of Shots
Start Delay
Blink Detection
Digital Zoom
Instant Review
Face Priority
Flash Mode
Drive Mode
Focus Mode
Zoom Position
MF Position
Memory White Balance
Sensitivity
EV Compensation
AE Metering
Digital Zoom
DISPLAY
File No.
Green Button
Sharpness
Saturation
Tone Adjustment
Contrast
Date Imprint
Interval
Shoot
9
Appendix
250
Default Setting
0 min. 10 sec.
2 pictures
In 0 hr. 0 min.
O (On)
O (On)
O (On)
P (Off)
O (On)
P (Off)
P (Off)
P (Off)
P (Off)
P (Off)
P (Off)
P (Off)
P (Off)
O (On)
P (Off)
O (On)
Green Mode
G (Normal)
G (Normal)
G (Black and white)
G (Normal)
P (Off)
Last
Memory
Setting
Yes
Yes
Yes
Yes
*
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Reset
Page
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
p.133
p.135
p.84
p.135
p.147
p.140
p.136
p.137
p.137
p.138
p.139
[W Setting] Menu Items
Default Setting
Save as USER
Operation Volume
Playback Volume
Start-up Sound
Sound
Shutter Sound
Operation Sound
Self-timer Sound
Cancel
3
3
1
1
1
1
According to initial
setting
24h
1/1/2009
According to initial
setting
Same as W Hometown
According to initial
setting
According to initial
setting
According to initial
setting
According to initial
setting
According to initial
setting
Date
MSC
According to initial
setting
G
5 sec.
3 min.
P (Off)
O (On)
Cancel
Cancel
Cancel
Date Style (date)
Date
Adjust
Date Style (time)
Date
Time
Select Time
Destination (City)
World
Time
Destination (DST)
Hometown (City)
Hometown (DST)
Language/
Folder Name
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
Guide Display
Reset
Delete all
Format
Last Memory Reset
Page
Setting
Setting
Yes
Yes
p.199
Yes
Yes
Yes
Yes
Yes
Yes
p.200
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Yes
Yes
Yes
p.40
p.206
p.207
p.224
Yes
No
p.208
Yes
Yes
Yes
Yes
Yes
—
—
—
Yes
Yes
Yes
Yes
Yes
—
—
—
p.209
p.210
p.211
p.212
p.213
p.215
p.168
p.198
p.44
p.201
p.204
9
Appendix
Item
251
Playback Mode Palette Items
Item
Interval
Slideshow Screen Effect
Sound Effect
Digital Filter
Frame Composite
Default Setting
3 sec.
Wipe
O(On)
B&W
Default1
Depending on the
Recorded Pixels
picture taken
Resize
Depending on the
Quality Level
picture taken
Depending on the
Cropping
picture taken
Built-in memory Image/Sound Copy
SD Memory Card
Image Rotation
Normal
Save as Still Image
—
Movie Edit
Divide Movies
—
Red-eye Compensation
—
Voice Memo
—
Single Image/
Depending on the
Sound
recorded image/sound
Protect
Depending on the
All Images/Sounds
recorded image/sound
Single Image
Copies: 0
DPOF
All Images
Date:P (Off)
Image Recovery
Cancel
Start-up Screen
Off
9
Appendix
252
Last Memory Reset
Setting
Setting
Yes
Yes
Yes
Yes
Yes
Yes
No
—
Yes
Yes
Page
p.158
p.178
p.183
—
—
p.176
—
—
p.176
—
—
p.177
—
—
p.188
—
—
—
—
—
—
—
—
—
—
p.160
—
—
—
—
—
—
—
Yes
—
—
—
Yes
p.186
p.182
p.194
p.170
p.190
p.169
p.213
Key Operation
Item
Function
Default Setting
Last Memory Reset
Page
Setting
Setting
Operation
Mode
Zoom Position
Q mode
—
—
—
Full wide-angle
*
No
2
Drive Mode
9 (Standard)
*
Yes
4
5
Flash Mode
Focus Mode
*
*
Yes
Yes
3 button
Menu Display
, (Auto)
= (Standard)
Capture mode:
[A Rec. Mode] menu
Playback mode:
[W Setting] menu
p.82
p.95 p.101
p.110
p.113
—
—
p.53
Normal
*
Yes
p.20
Face Priority On
*
Yes
p.78
Display
Yes
Yes
—
Green Mode
Yes
Yes
p.80
Q button
Zoom lever
Four-way
controller
Information
Display
Operation
I button
Mode
EVF/LCD
Monitor display
button
switching
Green button Capture Mode
W
button
9
Appendix
253
List of World Time Cities
City: indicates cities that can be set as either the Initial Setting (p.40) or the World Time (p.204).
Video Output Format: indicates the video output format of the city set as the Initial Setting.
Region
North
America
9
Appendix
254
City
Honolulu
Anchorage
Vancouver
San Francisco
Los Angeles
Calgary
Denver
Chicago
Miami
Toronto
New York
Halifax
Central and Mexico City
South
Lima
America
Santiago
Caracas
Buenos Aires
Sao Paulo
Rio de Janeiro
Europe
Lisbon
Madrid
London
Paris
Amsterdam
Milan
Rome
Copenhagen
Berlin
Prague
Stockholm
Budapest
Warsaw
Athens
Helsinki
Moscow
Dakar
Africa/
Algiers
West Asia
Johannesburg
Video Output
Format
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
PAL
PAL
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
Region
Africa/
West Asia
East Asia
Oceania
City
Istanbul
Cairo
Jerusalem
Nairobi
Jeddah
Tehran
Dubai
Karachi
Kabul
Male
Delhi
Colombo
Kathmandu
Dacca
Yangon
Bangkok
Kuala Lumpur
Vientiane
Singapore
Phnom Penh
Ho Chi Minh
Jakarta
Hong Kong
Beijing
Shanghai
Manila
Taipei
Seoul
Tokyo
Guam
Perth
Adelaide
Sydney
Noumea
Wellington
Auckland
Pago Pago
Video Output
Format
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
NTSC
NTSC
NTSC
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
Optional Accessories
A number of dedicated accessories are available for this camera.
Products marked with an asterisk (*) are the same as those supplied with
the camera.
Power supply
Rechargeable lithium-ion battery D-LI92 (*)
Battery charger kit K-BC92 (*)
(Battery charger D-BC92, AC plug cord)
AC adapter kit K-AC64
(AC adapter D-AC64, AC plug cord)
The battery charger and AC plug cord are only sold as a set.
Cable
USB cable I-USB7 (*)
AV cable I-AVC7 (*)
Strap
O-ST92 (*)
Camera case
O-CC92
Lens cap (*)
O-LC92
9
Appendix
255
Main Specifications
Type
Fully automatic compact digital still camera with built-in zoom lens
Number of
Effective Pixels
Approx. 12 megapixels
Image Sensor
1/2.33 inch CCD
Number of
Recorded Pixels
Still
E (4000×3000), 3:2 (4000×2672)
16:9 (4000×2256), 1:1 (2992×2992)
6 (3072×2304), f (2592×1944)
h (2048×1536), l (1024×768)
m (640×480)
Fixed at h (2048×1536) in Half-length Portrait mode.
Fixed at i (1600×1200) in Stage Lighting mode.
Fixed at f (2592×1944) in Digital SR mode.
Fixed at h (2048×1536) in Frame Composite mode.
Fixed at f (2592×1944) in Digital Wide mode, however, the
first frame uses h (2048×1536).
* Fixed at i (1600×1200) for one frame in Digital Panorama
mode.
* Fixed at f (2592×1944) when the sensitivity is set to 3200 or
6400.
* Fixed at f (2592×1944) in Continuous Shooting (L),
Continuous Shooting (M) or Continuous Shooting (H) mode.
*
*
*
*
*
Movie
Sensitivity
(Standard Output
Sensitivity)
AUTO, Manual (ISO 50 - 6400)
* The sensitivity is fixed at Auto (50 - 6400) in Digital SR mode.
File Format
Still
JPEG (Exif 2.2), DCF 2.0, DPOF,
PRINT Image Matching III
Movie
AVI (Motion JPEG), approx. 30 fps/15 fps, PCM system,
monaural sound, Movie SR (Movie Shake Reduction)
Sound
Voice memo: WAVE (PCM) system, monaural
9
Appendix
256
F (1280×720/15 fps), 84830 (848x480/30 fps)
G (640×480/30 fps), H (640×480/15 fps)
I (320×240/30 fps), J (320×240/15 fps)
Storage Media
Built-in memory (approx. 33.6 MB), SD Memory Card, SDHC
Memory Card
Approximate Image Storage Capacity and Recording Time
Still Pictures
Quality Level
Built-in Memory
Recorded Pixels
512 MB
SD Memory Card
C D
E
107 209 321
114 228 343
126 253 368
126 253 368
160 299 397
192 368 530
299 592 863
1042 1777 2324
2158 3357 3777
C D
E
7
14
22
4000×3000
8
16
24
3:2
4000×2672
9
18
26
16:9
4000×2256
9
18
26
1:1
2992×2992
11
21
28
6 3072×2304
13
26
37
f 2592×1944
21
42
61
h 2048×1536
74
126 165
l 1024× 768
153 239 268
m
640× 480
• The image storage capacity is for reference only. The actual image storage capacity
may vary depending on the SD Memory Card and the subject.
E
Movie
Built-in Memory
F (1280×720/15 fps)
84830 (848×480/30 fps)
G (640×480/30 fps)
H (640×480/15 fps)
I (320×240/30 fps)
J (320×240/15 fps)
32 sec.
22 sec.
32 sec.
1 min. 3 sec.
51 sec.
1 min. 37 sec.
512 MB
SD Memory Card
7 min. 31 sec.
5 min. 18 sec.
7 min. 31 sec.
14 min. 48 sec.
11 min. 59 sec.
22 min. 53 sec.
9
Appendix
• The above figures are based on our standard shooting conditions and may vary
depending on the subject, shooting conditions and type of the SD Memory Card
used.
• Recording can continue until the built-in memory or the SD Memory Card is full, or
the size of the recorded movie reaches 2 GB (when using an SDHC card). If
recording stops at 2 GB, start recording again to continue to record the rest of the
movie in blocks of 2 GB.
257
White Balance
Lens
Optical Zoom
Intelligent Zoom
Digital Zoom
Motion Blur
Reduction
Display
Viewfinder
Playback modes
Focus Modes
Focus
9
Appendix
Exposure control
Face Priority
258
Auto, Daylight, Shade, Tungsten Light, Fluorescent Light (Daylight
colors fluorescent, Daylight White Fluorescent, White Light
Fluorescent), Manual
Focal Length
4.6 mm - 110.4 mm
(approx. 26 mm - 624 mm in 35 mm equivalent
focal length)
Aperture
F2.8 (W) - F5.0 (T)
Lens Composition 14 elements in 11 groups (4 aspherical elements)
Zoom Type
Electrically driven
24×
6: approx. 31.3x, f: approx. 37.0x, h: approx. 46.9x, l:
approx. 93.8x, m: approx. 150x (when combined with optical zoom)
Max. approx. 6.25× (combines with 24× optical zoom to give zoom
magnification equivalent to 150×)
Still
CCD Image Sensor Shift (Shake Reduction), Hisensitivity shake reduction mode (Digital SR)
Movie
Movie shake reduction (Movie SR)
2.7 inch LCD, approx. 230,000 dots, Wide viewing angle
Electronic viewfinder with approx. 200,000 dots
Single-frame, 4-frame, 9-frame, Enlargement (max. 10×, scrollable),
Face Close-up Playback, Folder Display, Calendar Display,
Histogram Display, Deleting Selected Images, Slideshow, Resize,
Cropping, Image&Sound Copy, Image Rotation, Digital Filter, Movie
Playback/Edit (Save as Still Image, Divide Movies), Frame
Composite, Red-eye Compensation, Voice Memo, Protect, DPOF,
Image Recovery, Start-up Image Setting
Autofocus, Macro, 1cm Macro, Infinity, Manual Focus, AF Area Selection
(Selectable from among 25 points)
Type
TTL contrast detection system by sensor
(multiple (9-point autofocus)/spot/automatic
tracking AF changeable)
Focus range
Standard
: 0.4 m - ∞ (Wide-angle)
(From lens face)
1.7 m - ∞ (Telephoto)
Macro
: 0.1 m - 0.5 m
1cm Macro : 0.01 m - 0.3 m
* It is possible to switch to Infinity, Manual Focus
or AF Area Selection.
* Face Recognition AF is available only while the
camera recognizes the subject’s face.
Focus Lock
By half-pressing the shutter release button
Metering System Multi-segment metering, Center-weighted
metering, Spot metering
Exposure
±2 EV (can be set in 1/3 EV steps)
Compensation
Recognition of up to 32 people’s faces (up to 15 faces in the face
recognition frame on the display), Smile Capture, Blink Detection
* Face Recognition AE is available only while the camera recognizes
the subject’s face.
Shooting modes
Digital Filters
Movie
Shutter Speed
Built-in Flash
Drive Modes
Self-timer
Time Function
Power Source
Battery Life
Video Output
Dimensions
Weight
Accessories
9
Appendix
Interfaces
Auto Picture, Sport, Digital SR, Program, Shutter Priority, Aperture
Priority, Manual, USER, Landscape, Flower, Portrait, Backlight, Halflength Portrait, Night Scene, Night Scene Portrait, Stage Lighting,
Surf & Snow, Baby, Kids, Pet, Food, Fireworks, Frame Composite,
Party, Museum, Sunset, Digital Wide, Digital Panorama, Movie, Green
B&W, Sepia, Red, Pink, Purple, Blue, Green, Yellow, Soft, Color
extraction (Red, Green, Blue), Fish-eye, Brightness
Continuous
Approx. 1 second - until built-in memory or SD
Recording Time
Memory Card is full (however, maximum size is
limited to 2 GB)
1/4000 sec. - 1/4 sec., max. 4 sec. (Shutter Priority, Aperture Priority,
Manual Exposure, Night Scene mode)
Modes
Auto, Flash Off, Flash On, Auto + Red-eye, Flash
On + Red-eye, Slow-speed Sync, Slow-speed
Sync+Red-eye
Flash Range
Wide-angle:approx. 0.2 m - 9.1 m (approx. 0.66 ft
- 29.9 ft)
(Sensitivity:in Auto condition)
Telephoto: approx. 1.7 m - 5.1 m (approx. 5.6 ft 16.7 ft)
(Sensitivity:in Auto condition)
Single-frame, Continuous Shooting(L/M/H),
Self-timer (approx. 10 sec., approx. 2 sec.), Interval, Auto Bracket
Electronic control type, control time: Approx. 10 sec., 2 sec.
World Time
75 cities (28 time zones)
Rechargeable lithium-ion battery D-LI92, AC adapter kit (optional)
Number of
* Recording capacity shows approximate number
Recordable
of shots recorded during CIPA-compliant testing
Images
(with display on, flash used for 50% of the shots,
approx. 170
and 23 degrees centigrade).
pictures
Actual performance may vary according to
operating conditions.
Playback Time
* According to the result of in-house testing.
approx. 200 min.
Actual time may differ depending on usage
conditions.
Movie Recording
Time
approx. 70 min.
USB 2.0 (high-speed compatible) / PC/AV terminal/ External input
terminal
NTSC/PAL (monaural)
Approx. 110.5 (W) × 82.5 (H) × 89.5 (D) mm (excluding operating or
protruding parts)
Approx. 390 g (excluding battery and SD Memory Card)
Approx. 410 g (including battery and SD Memory Card)
Rechargeable lithium-ion battery, battery charger, AC plug cord, USB
cable, AV cable, software (CD-ROM), lens cap, strap, Operating
Manual, Quick Guide
259
WARRANTY POLICY
All PENTAX cameras purchased through authorized bona fide photographic
distribution channels are guaranteed against defects of material or workmanship
for a period of twelve months from date of purchase. Service will be rendered, and
defective parts will be replaced without cost to you within that period, provided the
equipment does not show evidence of impact, sand or liquid damage,
mishandling, tampering, battery or chemical corrosion, operation contrary to
operating instructions, or modification by an unauthorized repair shop. The
manufacturer or its authorized representatives shall not be liable for any repair or
alterations except those made with its written consent and shall not be liable for
damages from delay or loss of use or from other indirect or consequential
damages of any kind, whether caused by defective material or workmanship or
otherwise; and it is expressly agreed that the liability of the manufacturer or its
representatives under all guarantees or warranties, whether expressed or
implied, is strictly limited to the replacement of parts as hereinbefore provided. No
refunds will be made on repairs by non-authorized PENTAX service facilities.
9
Appendix
260
Procedure During 12-month Warranty Period
Any PENTAX which proves defective during the 12-month warranty period should
be returned to the dealer from whom you purchased the equipment or to the
manufacturer. If there is no representative of the manufacturer in your country,
send the equipment to the manufacturer, with postage prepaid. In this case, it will
take a considerable length of time before the equipment can be returned to you
owing to the complicated customs procedures required. If the equipment is
covered by warranty, repairs will be made and parts replaced free of charge, and
the equipment will be returned to you upon completion of servicing. If the
equipment is not covered by warranty, regular charges of the manufacturer or of
its representatives will apply. Shipping charges are to be borne by the owner. If
your PENTAX was purchased outside of the country where you wish to have it
serviced during the warranty period, regular handling and servicing fees may be
charged by the manufacturer’s representatives in that country. Notwithstanding
this, your PENTAX returned to the manufacturer will be serviced free of charge
according to this procedure and warranty policy. In any case, however, shipping
charges and customs clearance fees to be borne by the sender. To prove the date
of your purchase when required, please keep the receipt or bills covering the
purchase of your equipment for at least a year. Before sending your equipment
for servicing, please make sure that you are sending it to the manufacturer’s
authorized representatives or their approved repair shops, unless you are
sending it directly to the manufacturer. Always obtain a quotation for the service
charge, and only after you accept the quoted service charge, instruct the service
station to proceed with the servicing.
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from PENTAX distributors in some
countries can supersede this warranty policy. Therefore, we recommend
that you review the warranty card supplied with your product at the time
of purchase, or contact the PENTAX distributor in your country for more
information and to receive a copy of the warranty policy.
9
Appendix
The CE Mark is a Directive conformity mark of the European
Union.
261
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
9
Appendix
262
Pour les utilisateurs au Canada
Cet appareil numérique de la classe B est conforme à la norme NMB003 du Canada.
FOR CALIFORNIA, U.S.A. ONLY
Perchlorate Material-special handling may apply. The lithium battery
used in this camera contains perchlorate material, which may require
special handling. See www.dtsc.ca.gov/hazardouswaste/perchlorate
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We:
PENTAX Imaging Company
A Division of PENTAX of America, Inc.
Located at: 600 12 th Street, Suite 300
Golden, Colorado 80401 U.S.A.
Phone: 303-799-8000 FAX: 303-790-1131
Declare under sole responsibility that the product identified herein
complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital
device. Each product marketed is identical to the representative unit
tested and found to be compliant with the standards. Records
maintained continue to reflect the equipment being produced can be
expected to be within the variation accepted, due to quantity production
and testing on the statistical basis as required by 47CFR §2.909.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired
operation. The above named party is responsible for ensuring that the
equipment complies with the standards of 47CFR §15.101 to §15.109.
Product Name: PENTAX Digital Still Camera
Model Number: X70
Contact person: Customer Service Manager
Appendix
Date and Place: March, 2009, Colorado
9
263
Information for Users on Collection and Disposal of Old
Equipment and Used Batteries
1. In the European Union
These symbols on the products, packaging and/or
accompanying documents mean that used electrical and
electronic equipments and batteries should not be mixed with
general household waste.
Used electrical/electronic equipments and batteries must be
treated separately and in accordance with legislation that
requires proper treatment, recovery and recycling of these
products.
Following the implementation by member states, private
households within the EU states may return their used
electrical/electronic equipments and batteries to designated
collection facilities free of charge*.
In some countries your local retailer may also take back your
old product free of charge if you purchase a similar new one.
*Please contact your local authority for further details.
By disposing of this product correctly you will help ensure that
the waste undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the
environment and human health which could otherwise arise
due to inappropriate waste handling.
2. In other countries outside the EU
These symbols are only valid in the European Union. If you
wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of disposal.
9
Appendix
264
For Switzerland: Used electrical/electronic equipment can be
returned free of charge to the dealer, even when you don't
purchase a new product. Further collection facilities are listed
on the home page of www.swico.ch or www.sens.ch.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a designation
for the chemical element or compound in use. In this case you
have to comply with the requirement set by the Directive for the
chemicals involved.
Index
Symbols
b (Flash pop-up)
button .................................49
m (EV compensation)
button .................................49
K Sunset .........................70
n Stage Lighting ..............70
E Museum .......................70
Baby .............................70
Backlight ......................70
Numerics
1cm Macro
...................113
A
AC adapter .........................33
ACDSee ...........................218
Adding sound
(Voice Memo) ..................194
AE Metering .....................128
= Area Selection ..........115
AF Assist Light .................118
Auto + Red-eye c ...........110
Auto Bracket a ..............101
Auto F .......................123
Auto Power Off ................211
Auto, ..............................110
Automatic Tracking
...................................78, 116
c (Aperture Priority)
Mode ..................................73
AV cable ..........................173
AV equipment ..................173
B
9
Appendix
A Mode ...................... 12, 52
Q Mode ..................... 12, 52
Q button .................... 49, 51
I button ..................... 48, 50
[A Rec. Mode]
menu ......................... 57, 249
[W Setting] menu ....... 58, 251
9 Green Mode ................. 80
i Delete ................. 150, 164
x Tele ............................... 82
w Wide ............................ 82
y Magnify ....................... 161
X Green Button .............. 140
f Four-/Nine-image
display ............................. 152
g Self-timer ...................... 95
I (Auto Picture) ........... 63
A Night Scene ................. 85
B Night Scene Portrait ..... 85
C Half-length Portrait ....... 86
C Movie .......................... 143
H Landscape ................... 70
P Portrait .......................... 86
I Flower ........................... 70
Q Surf & Snow ................. 90
\ Sport ............................. 90
c Digital SR ................... 85
R Kids ............................... 88
Y Pet ................................ 89
K Food .............................. 70
S Fireworks ..................... 85
N Frame Composite ........ 93
B Party ............................. 92
X Digital Wide ............. 102
F Digital Panorama ...... 104
B&W filter .........................178
Basic Mode ........................80
Battery level indicator ........32
Blink Detection ...........67, 135
265
Bright Area Adjustment ... 130
Brightness Filter .............. 178
Brightness Level .............. 209
Built-in memory ............... 188
Built-in memory display ..... 52
C
Calendar display .............. 154
Camera Shake ................ 146
Capture Mode Palette ....... 69
Center-weighted
metering M ..................... 128
Changing volume ............ 200
Charging a battery ............. 29
Checking the Memory
Card ................................... 38
City name ........................ 254
Color extraction filter ....... 178
Color filter ........................ 178
Connecting to a AV Equipment
......................................... 173
Connecting to a TV .......... 173
Continuous Shooting ......... 97
Continuous Shooting (L/M/H)
................................ 97
Contrast ........................... 138
Copy ................................ 188
Correct exposure ............. 107
Cropping .......................... 177
L
9
Appendix
266
M
H
D
Date and time
setting ........................ 44, 201
Date Imprint ..................... 139
Daylight G ....................... 123
Daylight saving time .......... 43
Default setting ........... 40, 249
Delete i ................. 150, 164
Delete all ......................... 168
Deleting sounds ............... 165
Destination ...................... 204
Digital Filter ......................178
Digital SR ...........................85
Digital Wide Mode ............102
Digital Zoom .................82, 84
Display brightness ...........209
W button ..........49, 51
Display Language ............206
Dividing movies ................187
DPOF settings .................190
Drive Mode ....95, 97, 98, 101
E
e-dial ............................49, 50
Editing Movies .................186
Error messages ...............245
EVF/LCD button .................49
Exposure ..........................107
Exposure Mode ..................71
F
Face close-up playback ...162
Face Recognition
function ..............................78
File number ......................147
Filters ...............................178
Fireworks ...........................85
Fish-eye Filter ..................178
Flash Mode ......................110
Flash Off a ......................110
Flash On + Red-eye d ....110
Flash On b ......................110
Flower ................................70
Focus Mode .....................113
Focusing ..........................113
Focusing Area ..................116
Folder display ..................154
Folder Name ....................207
Food ...................................70
Format .............................198
Four-image display f .....152
Four-way controller ......49, 51
Frame Composite ...... 93, 183
Frame Rate ..................... 145
G
Green Button ....... 49, 51, 140
Green Mode ...................... 80
Guide display ................... 213
Guide Indications ............... 25
H
Half-length Portrait
Mode ................................. 86
Histogram .......................... 25
Hometown ................. 43, 204
I
Image quality of still
pictures ............................ 122
Image Recovery .............. 169
Image Storage
Capacity .......................... 257
Infinity s ......................... 113
Info Display ........................ 22
Installing a battery ............. 30
Installing the Software ..... 220
Instant Review ........... 67, 135
Intelligent Zoom ................. 82
Interval ....................... 98, 133
Interval Shootingk ... 98, 133
K
Kids Mode ......................... 88
Landscape ......................... 70
Language setting ....... 40, 206
M
a (Manual) Mode .............. 75
Macintosh ........................ 220
Macro q .......................... 113
Magnify y ....................... 161
N
Night Scene Mode .............85
Night Scene Portrait
Mode ..................................85
Nine-image display f .....152
NTSC ...............................208
Number of pixels ..............120
Number of Shots ........98, 133
O
4 button .........................51
Opening screen ...............213
Operating the Menus .........53
Optional accessory ..........255
P
PAL ..................................208
Panoramic Pictures ..........104
Party Mode ........................92
Pet Mode ...........................89
Photo processing lab .......190
Picture mode ......................68
Playback
.........................150, 151, 195
Playback Mode
Palette ......................155, 252
Playing back movies ........151
Portrait Mode .....................86
9
Appendix
L
Manual Focus \ ...........113
Manual K ........................123
Memory ............................147
3 button ..............49, 51
Mode dial ...........................68
Movie ...............................143
Movie SR (Movie Shake
Reduction) Function .........146
MSC (Mass Storage Class)
.........................................225
Multi-segment
metering L .....................128
267
Power Saving .................. 210
Power switch ... 38, 39, 48, 50
Press fully
(shutter release button) ..... 66
Press halfway
(shutter release button) ..... 66
Product Registration ........ 224
e (Program) Mode ............ 71
Protect Z ...................... 170
Provided Software ........... 218
PTP (Picture Transfer
Protocol) .......................... 225
Q
Quick Zoom ..................... 212
R
Rec. Mode Menu ....... 57, 249
Recorded Pixels ...... 120, 145
Recording movies ............ 143
Recovering images .......... 169
Red-eye Compensation ... 182
Red-eye reduction cd ... 110
Reset ............................... 215
Resize ............................. 176
Rotating ........................... 160
S
9
Appendix
268
Saturation ........................ 137
Saving as still picture
(movie) ............................ 187
Saving pictures by date ... 207
Saving settings ................ 147
H (Scene) ...................... 69
Screen Effect ................... 159
SD Memory Card ............... 34
Select Time ..................... 205
Selecting a Shooting
Scene ................................ 69
Self-timer g ...................... 95
Sensitivity ........................ 125
Sepia filter ........................178
Setting Menu ..............58, 251
Shade H .........................123
Shake Reduction .............131
Sharpness ........................136
Shooting information ..........21
Shutter release
button .....................48, 50, 66
Shutter Speed ..................107
Slideshow ........................158
Slow-speed Sync G .......110
Slow-speed Sync+Red-eye
H ...................................110
Smile Capture function ......78
Soft filter ...........................178
Sound settings .................200
Sound types .....................201
Specifications ...................256
Sport Mode ........................90
Spot AE metering N .......128
Standard = ...................113
Start Delay .................98, 133
Starting-up in the
Playback Mode ..................39
Start-up screen ................213
Strap ..................................28
Surf & Snow Mode .............90
System Requirements .....219
T
Time imprint .....................139
Tone Adjustment ..............137
Tungsten Light I ............123
TV ....................................173
b (Shutter Priority)
Mode ..................................72
U
USB Connection ..............224
A (USER) Mode ............76
V
Video output
format ...................... 208, 254
Voice Memo .................... 194
W
White Balance ................. 123
Windows .......................... 219
World Time ...................... 204
Z
Zoom /x/w ..................... 82
Zoom lever ........................ 48
9
Appendix
269
Memo
Memo
Memo
Memo
HOYA CORPORATION
PENTAX Imaging Systems Division
2-36-9, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.jp)
PENTAX Europe GmbH
(European Headquarters)
Julius-Vosseler-Strasse 104, 22527 Hamburg, GERMANY
(HQ - http://www.pentaxeurope.com)
(Germany - http://www.pentax.de)
PENTAX U.K. Limited
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
PENTAX France S.A.S.
112 Quai de Bezons, B.P. 204, 95106 Argenteuil
Cedex, FRANCE
(http://www.pentax.fr)
PENTAX Italia S.r.l.
Via Dione Cassio 15, 20138 Milano, ITALY
(http://www.pentaxitalia.it)
PENTAX (Schweiz) AG
Widenholzstrasse 1, 8304 Wallisellen, Postfach 367,
8305 Dietlikon, SWITZERLAND
(http://www.pentax.ch)
PENTAX Imaging Company
A Division of PENTAX of America, Inc.
(Headquarters)
600 12th Street, Suite 300 Golden, Colorado 80401, U.S.A.
(PENTAX Service Department)
12061 Tejon St. STE 600 Westminster, Colorado
80234, U.S.A. (http://www.pentaximaging.com)
PENTAX Canada Inc.
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA (http://www.pentax.ca)
PENTAX Trading
(SHANGHAI) Limited
23D, Jun Yao International Plaza, 789 Zhaojiabang
Road, Xu Hui District, Shanghai, 200032 CHINA
(http://www.pentax.com.cn)
http://www.pentax.jp/english
• Specifications and external dimensions are subject to change without notice.
53487
Copyright © HOYA CORPORATION 2009
H01-200903 Printed in Vietnam
">