product catalogue
ALLVENT VENTILATION PRODUCTS
PRODUCT CATALOGUE
EDITION 14
www.allvent.com.au
1
Product Index
RESIDENTIAL
VENTILATION
M1 Series
4
HV/HVR Series
6
Slim Series
7
WINDOW AND WALL FANS
Vario Series
8
EXTERNAL WALL MOUNTED CENTRIFUGAL FANS
CA WE D Series
9
DUCTED CEILING EXTRACTION FANS
XC Series
10
NVF Series
11
A Series
12
Cabinet Fans
13
IN-LINE MIXED FLOW FANS
Lineo Series
14
IN-LINE CENTRIFUGAL FANS
CA MD Series
16
SUB FLOOR VENTILATION
SF Series
17
MECHANICAL VENTILATION
WITH HEAT RECOVERY
HVR Series
18
WALL / CEILING FANS
AXIAL FANS
ACCESSORIES
VENTILATION KITS
20
STAINLESS STEEL GRILLES
22
INTERNAL CEILING GRILLES
23
EXTERNAL WALL GRILLES
24
While every effort has been made to accurately present specifications and data in this catalogue, Allvent P/L accepts no liability
for losses arising from errors or omissions contained herein. As a result of continuous product development all data and
specifications are subject to change without notice.
2
INFO HOTLINE 1300 883 544
ACCESSORIES
continued
COMMERCIAL
& INDUSTRIAL
VENTILATION
HEAT
FITTINGS
26
FLEXIBLE DUCT / DAMPERS
27
CONTROLLERS
28
IDV-HC Series
32
IVRD Series
33
IVAD Series
34
PLATE AXIAL FANS
HQ and HW Series
36
GIGABOX CENTRIFUGAL FAN
GB..
38
KITCHEN EXHAUST FANS
KMV Series
42
ROOF MOUNT EXHAUST FANS
RCV/RCD Series
43
ROOF MOUNT EXTRACTION OR SUPPLY KITS
SECD Series
44
INDUSTRIAL FANS
Pedestal, Wall and
Portable Floor
45
AIR CURTAINS
Air Curtains
46
RESIDENTIAL HEAT TRANSFER
Heat Transfer Kits
50
INFRARED WALL HEATERS
Thermologika
52
Thermologika
Soleil Plus
53
Microrapid Heater
54
CAR PARK JET FANS
WALL MOUNTED FAN HEATERS
HYGIENE
DOLPHIN HAND DRYERS
56
www.allvent.com.au
3
THE NEW MINIVENT® FAMILY
M1 Series
QUIET, ATTRACTIVE AND EFFICIENT
The excellent design of the MiniVent®, M1
blends in beautifully everywhere, even in the
most demanding room designs. The compact
and attractively designed fascia completely
shields the view of the fan interior.
Technical Data
Model
Dia 0
V
Dimensions
Hz
W
m3/hr
L/sec
[email protected]
M1/100
98
240
50
9
90
25
30
M1/120
118
240
50
13
195
54
36
M1/150
145
240
50
10
310
86
39
Features
• IP Rating 45
• Compact designed fascia remains clean and attractive
• High efficiency impeller
• Backdraft shutter as standard
• Two speed
• Energy efficient – 5 watts at 75m /h and 10 watts at 280m /h
3
3
A
B
C
D
E
M1/100
147
35
52
96
980
M1/120
176
39
70
116
1180
M1/150
210
48
76
142
1450
Performance Curves
Applications for Use
Suitable for all ventilation applications in bathrooms, toilets
and all wet areas.
Energy Saving Features (optional)
4
INFO HOTLINE 1300 883 544
Built-in Run-on Timer
(N)
Built-in Humidity Sensor
(F)
Built-in Presence Sensor
(P)
Quiet.
Energy-efficient.
The M1/150 is the most energy efficient 150mm wall fan on the market!
• Up to 70% more efficient than any other 150mm wall fan
• Only 10 watts on high speed
Powerful and quiet.
Up to 70% energy savings.
No compromises are made with MiniVent® M1 in terms of
power and noise level. The ultraSilence® technology developed
by Helios ensures optimum quietness and lowest noise
emission at all levels.
If power consumption is analysed in relation to flow rate, it
is clear at a glance that M1 from Helios scores well. For this
reason, MiniVent® has been awarded the ‘greenTec-Label’ for,
particularly, energy saving solutions.
When introducing the M1/100, Helios suceeded in setting the
new market standard with just 25dB(A) at 75m3/h. The M1/150
is now furthering this success with just 35dB(A) at 280m3/h.
Furthermore, the new M1/150 is equipped with highly efficient
EC motor technology which, with regard to speed control,
leads to a saving of up to 70% in comparison to conventional
AC technology.
Removeable guide vanes
Removeable Backdraft
Ball bearing mounted,
maintenance-free, energy-saving motor
Elegant, closed and
easy-care fascia
IP45 rating for installation in zone 1 of bathrooms
www.allvent.com.au
5
WALL / CEILING FANS
HV/HVR Series
POWERFUL EXTRACTION
The timeless design blends well in any
stylish room. Designed to ventilate living
and dining rooms, offices and conference
rooms, restaurants or foyers.
Technical Data
Dimensions
Model
Dia 0
V
Hz
W
m3/hr
L/sec
dBA
IP Rating
HR90K
97mm
240
50
14
95
27
42
45
HR90K 12V
97mm
12
50
18
95
27
42
44
HVR150
145mm
240
50
30
260
73
46
44
HV200
207mm
240
50
30
450
125
52
54
HV250
250mm
240
50
40
840
234
55
54
Features
• HV200 and HV250 reversible (supply and exhaust)
• High air flow and low noise through low resistance
• Totally enclosed, powerful motor with high efficiency
• Quiet continuous operation at any angle
• 40,000 running hours
• Speed controllable by speed controller (accessory)
Performance Curves
6
INFO HOTLINE 1300 883 544
Models
HR90K
∆
HRV150
◊
HV200
*HV250
WALL / CEILING FANS
SLIM Series
ECONOMICAL
The SLIM Series can be wall or ceiling mounted. SLIM’s can
be used in bathrooms, toilets, kitchens or utility rooms in
domestic or commercial applications.
Technical Data
Dimensions
Model
Dia 0
V
Hz
W
m3/hr
L/sec
[email protected]
SLIM4C
100mm/4”
240
50
SLIM5C
125mm/5”
240
50
14
90
25
39
18
140
38
42
SLIM6C
150mm/6”
240
50
29
250
70
46
Features
• 14mm slim line grille
• Easy installation
• Backdraft shutter
A
B
C
D
E
F
G
H
• Run-on timer optional
SLIM4C
158
158
14
98
94
6
140
140
• Other controls available
SLIM5C
178
178
14
118
100
6
160
160
SLIM6C
205
205
14
148
110
6
187
187
Performance Curves
www.allvent.com.au
7
WINDOW AND WALL FANS
VARIO Series
QUIET, FLEXIBLE AND REVERSIBLE
Vario exhaust/supply fans provide flexible solutions to
improve the quality of air we breathe in any domestic
or commercial environment.
Technical Data
Dimensions
Model
V
Hz
W
m3/hr
L/sec
[email protected]
150/6”AR
220-240
50
25
235
65.3
37.5
230/9”AR
220-240
50
26
480
133
35.6
300/12”AR
220-240
50
45
1050
292
40.2
Accessories
Model
Description
KITMU
wall mounting kit with rods
VARWT
optional wall tube available
A
B
C
D
E
min/max
0 Hole
cut-out
Features
150/6”
215
218
31
97.5
2/38
185-190
• Highly efficient impellers: best in their category for
performance and low energy consumption
230/9”
294
297
31
130
2/38
257-262
300/12”
390
393
31
147
2/38
324-329
• Low noise levels
• Casing made from shock-resistant UV stabilised ABS
• IPX4 rating
Please refer to the main catalogue
• Pull cord option
• Automatic shutters
• All models reversible (supply and exhaust)
Applications for Use
• dwellings
• public houses
• café’s and shops
• offices
• sports centres and gyms • schools
• restaurants
8
Performance Curves
• community halls and many more
INFO HOTLINE 1300 883 544
High Flexibility
Vortice Vario fans are designed to
provide high flexibility and a wide
choice of applications in order to
satisfy even the most demanding
requirements.
EXTERNAL WALL MOUNTED CENTRIFUGAL FANS
CA WE D Series
SILENT EXTRACTION
The CA WE D is the ideal solution where centralised extraction
is required for more than one room eg: kitchens, bathrooms,
storage areas, cellars; public spaces such as bars and shops;
work spaces including workshops and laboratories.
Technical Data
Dimensions
Model
V
Hz
W
m3/hr
L/sec
[email protected]
IP
CA100 WE D
240
50
60–80
CA125 WE D
240
50
60–80
200–330
56–92
38.3–50.1
IPX5
215–380
60–106
36.3–49.5
IPX5
CA150 WE D
240
50
110–155
545–750
151–208
43.2–51.4
IPX5
CA200 WE D
240
50
110–155
570–785
158–218
43.4–51.3
IPX5
Features
• Centrifugal duct-mounted extractors for external
installation thereby reducing noise
• Automatic close funtion prevents air returning to the room
• Steel housing with polyester paint long life
A
B
C
D
E
F
CA 100 WE D
262
345
127
113
970
20
CA 125 WE D
262
345
127
113
970
20
CA 150 WE D
360
430
173
155
1470
20
CA 200 WE D
360
430
173
155
1970
20
• Two speed
Performance Curves
Please refer to the main catalogue
Applications for Use
www.allvent.com.au
9
DUCTED CEILING EXTRACTION
XC Series
LOW PROFILE
The XC series is a low profile ceiling mounted
exhaust fan suitable for tight ceiling spaces in
domestic and commercial applications.
Technical Data
Dimensions
Model
Dia 0
V
Hz
W
m3/hr
L/sec
[email protected]
XC13E
100
240
50
28
180
50
32
XC15E
100
240
50
34
280
77
39
Features
• Installation ceiling depth 142mm for XC13E
• Built in backdraft damper
• Power cable and plug supplied
A
B
C
D
INFO HOTLINE 1300 883 544
F
G
H
I
XC13E
270
270
156
14
100
242
264
228
242
XC15E
326
326
169
14
100
144
320
276
300
Performance Curves
10
E
DUCTED CEILING EXTRACTION
NVF Series
MODERN FASCIA
The NVF series is a modern styled ceiling mounted fan
suitable for domestic and residential high-rise applications.
Hi-static duct characteristics.
Technical Data
Model
Dia 0
V
Dimensions
Hz
W
m3/hr
L/sec
[email protected]
NVF13
100
240
50
26
180
50
39
NVF15
125/150
240
50
30
270
75
46
Features
• Modern fascia design
A
B
C
D
E
F
G
H
NVF 13
295
295
220
25
98
130
270
200
NVF 15
320
320
205
25
125
150
310
270
• Built-in backdraft damper
• 100mm, 125mm or 150mm duct connections
• Quiet operation
• Power cable and plug supplied
Performance Curves
www.allvent.com.au
11
AXIAL IN-LINE FANS
A Series
RELIABLE, HARD WORKING
The A series axial fans are housed in a quality
metal casing. Reliable fans for bathroom and
laundry applications with air flows against
low resistances.
Dimensions
Technical Data
Model
Dia 0
V
Hz
W
Phase 0
RPM
L/sec
m3/hr
dBA
A40
100
240
50
18
1
2P
38
137
18
A60
150
240
50
35
1
2P
91
328
49
A80
200
240
50
46
1
2P
135
486
55
A100
250
240
50
31
1
4P
230
828
52
Features
• Metal construction
• Mounting brackets for easy installation
• Long term reliable operation
• Standard with 240v three pin plug
Performance Curves
12
INFO HOTLINE 1300 883 544
A
B
C
D
E
A40
120
121
A60
173
181
A80
225
A100
250
F
G
H
I
J
123
990
157
1460
40
87
24
120
72
5.50
51
103
25
165
77
6.50
235
165
270
220
1990
51
122
30
200
92
70
2300
65
155
30
255
125
70
SMALL AXIAL FANS
Cabinet Fans
COMPACT
This range of small axial fans are ideal for use in
compact cabinets and space-limited areas where
constant, cooling airflow is required.
Technical Data
Dimensions
Model
Dia Ø
V
Hz
W
m3/hr
dBA
UF-80A23B-H
80x80x38
240
50
14
51
32
UF-92A23B-H
92x92x38
240
50
16
78
34
UF-16FC23B-H
160x160x62
240
50
46
450
52
UF-18JC23B-H
180x180x90
240
50
75
781
54
Features
• Made of aluminium casing
• Over 40,000 running hours
• High quality, proven reliability
• Ball bearing
• Basket guards available
A
B
C
D
E
F
G
UF-80A23B-H
38
4
80
71.5
4.3
300
76
UF-92A23B-H
38
4
92
82
4.3
300
88
UF-16FC23B-H
62
4
189
138.5
5.5
-
142
UF-18JC23B-H
90
6
209
152.7
5.5
-
160
www.allvent.com.au
13
IN-LINE MIXED FLOW EXTRACTOR FANS
LINEO Series
LONG LIFE
The Lineo mixed flow in-line fans have a very small
overall size, making them ideal for installation in
cramped areas.
Technical Data
Features
Model
Dia Ø
V
W
min/max
FLA
min/max
[email protected]
min/max
l/s
min/max
m3/h
min/max
100V0
100
240
20/23
0.09/0.11
30.7/39.4
50/70.8
180/255
125V0
125
240
25/33
0.11/0.15
33.9/43
69.4/101.4
250/365
150V0
150
240
40/58
0.18/0.26
41.4/50.5
106.9/152.8
385/550
200QV0
200
240
45/75
0.22/0.37
39.6/49
194.4/263.9
700/950
• Two speeds
• Self extinguishing V0 plastic
• IP44 splash proof protection on all models
• Timer models are adjustable from 3 to 20 minutes
200V0
250
240
98/145
0.43/0.64
46.2/52.5
219.4/294.4
790/1060
• Long Life ball bearing motors continuous, trouble
free operation
250QV0
250
240
85/110
0.40/0.50
49.1/56.2
200/275
720/990
• Quick and easy installation
250V0
250
240
110/180
0.48/0.78
51.4/59.1
275/375
990/1350
• Simple maintenance
315V0
315
240
200/300
0.90/1.32
50.6/63.4
483.3/638.9
1740/2300
• Low sound emission
* Timer models available
Dimensions
A
B
C
D
E
F
G
100V0
96
303
211
90
188
101
189
125V0
122
258
211
90
188
101
189
150V0
146
294
234
110
214
112
212
200V0
196
300
260
140
234
125
235
250V0
247
385
317
176
300
152
292
315V0
312
448
392
220
361
188
359
Performance Curves
Please refer to the main catalogue
14
INFO HOTLINE 1300 883 544
Limitless Applications
Office spaces
Installation made easy
Bathrooms and showers
Large capacity terminal box
for easy wiring IP44
Toilets and laundries
The perfect solution for
limited space
Impact resistant polymer,
self extinguishing (VO)
Maintenance and cleaning?
Open the clips and pull out
the fan unit
www.allvent.com.au
15
CENTRIFUGAL IN-LINE FANS
CA MD Series
METAL CONSTRUCTION
For medium to smaller air flow volumes against
high resistances. Universal application for domestic,
commercial and industrial purposes.
Technical Data
Model
Dia 0
V
Dimensions
Hz
W
m3/hr
L/sec
[email protected]
CA100MD
100
240
50
85
340
94
43
CA125MD
122
240
50
85
450
125
45
CA150MD
177
240
50
85
550
153
53
CA200MD
197
240
50
90
830
231
46
CA250MD
247
240
50
120
1080
300
52
CA315MD
315
240
50
120
1080
300
52
Features
• Two speeds
• Polyester powder-coated metal for any weather condition
• Mounting brackets for easy installation
• Turbine fan on ball-bearing mounted motor
• Can be mounted in any position
• Protection rating IP44
Performance Curves
Please refer to the main catalogue
16
INFO HOTLINE 1300 883 544
A
B
C
0D
0E
F
CA100MD
15
239
295
97
255
15
CA125MD
23
239
195
122
255
23
CA150MD Q
30
239
295
147
255
30
CA150MD
17
275
392
147
347
17
CA160MD
18
275
392
157
347
18
CA200MD
17
275
302
197
347
20
CA250MD
35
275
392
247
347
38
CA315MD
30
306
455
312
406
36
SUB-FLOOR VENTILATION
SF Series
UNDER FLOOR VENTILATION SYSTEM
These underfloor fans are designed for sub-floor
ventilation. Available as a supply / exhaust fan,
made to order. Ideal for high moisture areas.
Technical Data
Dimensions
Model
Flow
Cut-out
V
Hz
W
m3hr
L/s
SFE9712
Exhaust Fan
225 x 157
12
50
13
328
91
SFE9724
SFS9712
Exhaust Fan
225 x 157
240
50
35
328
91
45
Supply Fan
225 x 157
12
50
13
328
91
45
SFS9724
Supply Fan
225 x 157
240
50
35
328
91
45
Size
dBA
@3m
45
Features
• Available in 240V and12V
• Three pin plug (240V only)
• Quiet operation
• 12 Month warranty
• Optional transformer available
WPL15 WPL15
SFE9724SFE9724
SFS9724SFS9724
SFE9724SFE9724
WPL15 WPL15
SFE9724SFE9724
SFS9724SFS9724
SFE9724SFE9724
• Standard grille (WPL15) allow natural flow inlet air
• Exhaust fan (SFE9724) extract air from building space
• Supply fan (SFS9724) introduce outside air
• Exhaust fan (SFE9724) extract air from building space
• Creates better cross-flow and removes air from
complete building space (no ‘dead’ spots)
www.allvent.com.au
17
MECHANICAL VENTILATION WITH HEAT RECOVERY
HRV Series
WHOLE HOUSE VENTILATION UNIT
Titon HRV Series is a small, highly efficient ventilation
unit easily incorporated into small houses or
apartments where space is at a premium.
A centrally located continuously running mechanical supply
and extract fan extracts air via ducts from moisture producing
areas or ‘wet rooms’ such as kitchens and bathrooms to remove
odours and excessive humidity. The air is passed over the heat
exchanger, which transfers a high proportion of the heat of the
extract air to the incoming air, which is then distributed to the
habitable rooms via ducts.
Whole building ventilation is maintained by a contrast flow of
air between input and extract points. A boost facility provides
rapid extraction when necessary to remove higher levels of
pollutants and humidity. As an alternative, every room may
have an individual unit as opposed to a centrally located and
ducted unit.
18
INFO HOTLINE 1300 883 544
HRV Q Plus
Highly Efficient Heat Recovery Ventilation Units
The revolutionary ultra-compact HRV Q Plus continuously
running whole house ventilation unit with heat recovery is
independently tested to the highest standards. The HRV Q Plus
has been specifically designed to give improved performance
over older models without increasing the overall size of the
unit.
The combination of ultra low power consumption and a highly
efficient heat exchanger is specifically designed to enhance
SAP performance via Appendix Q, yet the unit remains small
enough too be easily incorporated into apartments and
smaller houses where space it at a premium. The HRV Q Plus
Mechanical Ventilation with Heat Recovery unit has many new
features including removable airtight filter covers for easy
access to filter maintenance.
Feature and Benefits
• Very compact unit can be fitted in airing cupboards, small
service cupboards or loft spaces.
• Lowest power consumption/specific fan power on Titon
compact units
• Highly efficient heat exchanger; up to 91%
• Standard version has a Summer mode to help reduce
dwelling overheating
Model
Nominal Fan Performance l/s
HRV 1.25 Q Plus
60 @ 50 Pa
HRV 1.5 Q Plus
70 @ 50 Pa
HRV 1.75 Q Plus
80 @ 80 Pa
HRV 2 Q Plus
80 @ 150 Pa
HRV 2.75 Q Plus
100 @ 100 Pa
HRV 3 Q Plus
120 @ 150 Pa
• Intelligent controller, quick and easy commission
• Fully adjustable boost overrun timer 0–60 minutes; can be
used with non-latching (momentary) switches to prevent
unit from being accidently left in boost mode.
• Intelligent frost protection stepped reduction of supply air
rates prevents freezing
• Setback setting to reduce ventilation where local
regulations allow
• Very lightweight for easy handling
• Demand control ventilation ready
• Volt free switching control
• Removable filter maintenance
• G3 filters as standard, G4 as an option
• Reusable plastic filter frames
• Quick fix via mounting bracket
• Patented features
www.allvent.com.au
19
KITS TO SUIT ALL APPLICATIONS
Air Transfer Kits
COMPLETE PACKAGE IN ONE BOX
ALVNVF13 Kit
Ventilating to the outside prevents condensation
damage to roof areas. Transfer hot or cool air
from air conditioners and heaters in one room to
one or more other rooms.
• 1 x NVF13
Kits designed to suit your needs also available.
• 1 x 100mm diameter x 3m length duct
• 1 x 100mm fixed or gravity grille
ALVDF150 Kit
ALVA60 Kit
• 1 x DF150 in-line fan
• 1 x A60 in-line fan
• 1 x 150mm diameter x 6m length duct
• 1 x 150mm diameter x 3m length duct
• 2 x 150mm fixed grilles
• 2 x 150mm fixed grilles
SLIM6 Kit
ALVDF150 Air Transfer Kit
• 1 x SLIM6
• 1 x DF150P in-line fan
• 1 x 150mm diameter x 3m length duct
• 1 x 150mm diameter x 6m length insulated duct
• 1 x 150mm fixed or gravity grille
• 3 x 150mm adjustable grilles
• Insulated duct / Nude core option
20
INFO HOTLINE 1300 883 544
Accessories
www.allvent.com.au
21
WALL/EAVE STAINLESS STEEL GRILLES – 304 GRADE
Dome Grilles
The dome style grille is an alternative fixed louvre.
The wall grille has an added protection with the
round hooded section. May also be used as an inlet.
Model
Size
A
B
C
D
DG100
100mm
100
150
50
10
DG125
125mm
125
185
50
10
DG150
150mm
150
210
60
10
Gravity Grilles
The gravity louvered grille is designed to allow air
to be vented to the atmosphere while protecting against
backdraft and vermin entry.
Model
Size
A
B
C
D
E
GG100
100mm
100
155
50
17
155
GG125
125mm
125
180
50
23
180
GG150
150mm
150
180
60
23
180
GG200
200mm
200
265
75
23
265
Hood Grilles
The hood grille is ideal for harsh weather areas
and regions that experience heavy rainfall.
Model
Size
A
B
C
100mm
100
137
52
HG125
125mm
125
167
52
HG150
150mm
150
167
62
HG100
Eave Grilles
The round, flush grille is ideal for under-eave venting.
Can be used as an inlet or outlet vent.
Model
22
Size
A
B
C
D
EG100
100mm
100
155
50
6
EG125
125mm
125
185
50
6
EG150
150mm
150
210
60
6
EG200
200mm
200
265
70
6
INFO HOTLINE 1300 883 544
ROOF
EMBER-P
TED
MESH FIT
IN BACK
INTERNAL CEILING GRILLES
Jet Centre Grilles
This range of downjet ceiling diffusers evenly disperses
air to a chosen area. Simple to install, it comes with
spring loaded attachment arms that lock and secure
the vent in place.
Model
Size
A
B
C
D
Euro 4WR
100mm
98
143
17
57
Euro 6WR
150mm
150
235
5
95
Euro 8WR
200mm
200
255
5
105
250mm
250
330
5
120
Euro 10WR
Egg Crate Grilles
The square-faced egg crate grille is commonly used
for air intake. Metal construction.
Model
Size
Neck
A
B
C
D
ERG151515
150 x 150mm
150mm
150
120
200
155
ERG202015
200 x 200mm
150mm
150
125
250
210
ERG202020
200 x 200mm
200mm
200
125
250
210
Cone Grilles
Commonly used for air intake, the design of these ceiling
diffusers accept air from surrounding surfaces and not directly
below. Ideal for heat, smoke and vapour extraction/transfer.
Simple airflow control – screw the inverted cone centre.
Model
Size
A
B
C
D
Euro 4WRC
100mm
98
147
17
57
Euro 6WRC
150mm
147
265
15
90
Euro 8WRC
200mm
200
320
15
90
Euro 10WRC
250mm
250
400
15
100
Euro12WRC
300mm
300
440
20
100
Stainless Steel Cone Grilles
Commonly used for air intake, the design of these ceiling
diffusers accept air from surrounding surfaces and not directly
below. Ideal for heat, smoke and vapour extraction/transfer.
Simple airflow control – screw the inverted cone centre.
Model
Size
A
B
C
CG 100
100mm
97
118
52
CG 125
125mm
120
141
52
CG 150
150mm
145
162
62
CG 200
200mm
195
214
73
www.allvent.com.au
23
EXTERNAL WALL GRILLES: PLASTIC
Gravity Grille: Euro WGS
The gravity louvered vent is designed to
allow air to be vented to the atmosphere
while stopping outside air and pests
entering the system when not in use.
Model
Size
Style
A
B
C
D
Euro 4WGS
100mm
Gravity
125
54
125
71
Euro 5WGS
125mm
Gravity
150
54
150
71
Euro 6WGS
150mm
Gravity
175
54
150
71
Fixed Grille: Euro WG
The fixed grille may be used as an outlet
or a fresh air intake vent. Used as a wall,
ceiling or under-eave vent.
Model
Size
Style
A
B
C
D
Euro 4WG
100mm
Fixed
125
54
125
71
Euro 5WG
125mm
Fixed
150
54
150
71
Euro 6WG
150mm
Fixed
175
54
150
71
Euro 8WG
200mm
Fixed
284
68
196
90
INTERNAL WALL/CEILING GRILLE: PLASTIC
Plastic Eggcrate Grille: PEG
The eggcrate grille may be used as an
outlet or a fresh air intake vent. Used as
a wall or ceiling vent.
24
Model
Size
A
B
C
D
E
ERG151515
125 x 125mm
100
71
125
125
17
ERG202015
150 x 150mm
125
71
150
150
17
ERG202020
175 x 175mm
150
71
175
175
17
INFO HOTLINE 1300 883 544
ESH
INSECT M
S
D
FITTE A
D
R
A
STAND
EXTERNAL WALL GRILLES: ALUMINIUM
Weather Proof Grille: WPL
Aluminium louvered grille for external
weather proof applications. Box adaptor
with duct connection.
Other sizes available on request.
Model
Duct Size
Face Size
Neck Size
WPL
150
280 x 212mm
225 x 157mm
WPL15
150
200 x 200mm
145 x 145mm
WPL20
200
250 x 250mm
195 x 195mm
WPL25
250
300 x 300mm
245 x 245mm
WPL30
300
350 x 350mm
295 x 295mm
Model
Duct Size
Face Diameter
RWL150
150
200
RWL200
200
250
RWL250
250
300
RWL300
300
350
RWL350
350
400
RWL400
400
450
Circular Grille: RWL
Aluminium, powder-coated grille for
external, weather-proof applications.
www.allvent.com.au
25
FITTINGS
Reducers
Model
Size
ALVRED10–12
100–125mm
ALVRED 10–15
100–150mm
ALVRED 15–20
150–200mm
• High Density Polyethylene
ALVRED 20–25
200–250mm
• Positive Lock Duct Tabs
ALVRED 25–30
250–300mm
ALVRED 30–35
300–350mm
Poly Fitting
• Heavy Duty
Y Fitting
Poly Fitting
• UV Stabilised
Size
ALVY10
100mm
ALVY12
125mm
ALVY15
150mm
• Robust
ALVY20
200mm
• Smooth Internal Lines
ALVY25
250mm
ALVY30
300mm
Double BTO
Poly Fitting
• UV Stabilised
• Robust
• Smooth Internal Lines
Reducer Y Fitting
Poly Fitting
• UV Stabilised
• Robust
• Smooth Internal Lines
26
Model
INFO HOTLINE 1300 883 544
Model
Description (mm)
ALVDBTO8666
200x150x150x150 4-way junction poly
ALVDBTO10888
250x200x200x200 4-way junction poly
MADE TO ORDER available
Model
Description (mm)
ALVY644
150x100x100
ALVY866
200x150x150
ALVY1088
250x200x200
ALVY121010
300x250x250
FLEXIBLE DUCT
DAMPERS
Core Flex
Non-Return Dampers
Commercial ventilation ducting
Backdraft shutter, air-stream
operated for installation in-line
with circular ducting.
• Silver/Black
• Fire Rated AS 4254
Model
Size mm/m
Model
Size
ALVHF3100
100mm/3m
ALVBD10
100mm
ALVHF3125
125mm/3m
ALVBD15
150mm
ALVHF3150
150mm/3m
ALVHF3200
200mm/3m
ALVBD20
200mm
ALVHF6100
100mm/6m
ALVBD25
250mm
ALVHF6125
125mm/6m
ALVBD30
300mm
ALVHF6150
150mm/6m
ALVHF6200
200mm/6m
ALVHF6250
250mm/6m
ALVHF6300
300mm/6m
ALVHF6350
350mm/6m
Insulated Flex
General purpose ducting
• Silver/Black inner core
• Fire Rated AS 4254
Intumescent Grilles / Fire Dampers*
• Rigid steel framed grille
that intumesces to form a
fire stop barrier
• Allows air flow through firerated walls and floors
• Can be fitted in a steel duct
• Up to 2 hours
fire protection
• Continued savings as no
moving parts to require
operational checks
• Large sizes
Circular Fire Dampers
Model
Size mm/m
ALVINS6150
150mm/6m
ALVINS6200
200mm/6m
ALVINS6250
250mm/6m
Model
Size
ALVINS6300
300mm/6m
IFDR4
100mm
ALVINS6350
350mm/6m
IFDR5
125mm
IFDR6
150mm
Semi-Rigid Flex
High temperature ducting
• Fire Rated AS 4254
• Rangehood Exhaust
Multi-purpose with zinc-coated
steel finish
IFDR8
200mm
IFDR10
250mm
IFDR12
300mm
Square Fire Dampers
Model
Size mm/m
ALVSRF100
100mm/3m
ALVSRF125
125mm/3m
ALVSRF150
150mm/3m
Model
Size
ALVSRF200
200mm/3m
IFDS66
150mm Sq
ALVSRF250
250mm/3m
IFDS88
200mm Sq
ALVSRF300
300mm/3m
IFDS1212
300mm Sq
IFDS1515
450mm Sq
IFDS2020
500mm Sq
IFDS2424
600mm Sq
Multi-purpose with zinc-coated
steel finish
* Rectangle Intumescent Fire Dampers also available
www.allvent.com.au
27
CONTROLLERS
Environmental Sensors
SUITABLE FOR ALL VORTICE VARIO MODELS
Vortice environmental sensors are designed to
detect environmental conditions ie: humidity,
temperature, human motion, smoke and odour
and automatically activate the extractor fans.
Vortice Range
C TEMP measures ambient room temperature
C SMOKE measures the air quality
C HCS measures ambient relative humidity
C TEMP
C SMOKE
C HCS
C PRI
C TIMER
Code
A
B
C
12992
12993
12994
12998
12999
144
144
144
144
144
54
54
54
54
54
55.8
55.8
55.8
55.8
55.8
C TIMER - an adjustable over-run timer
Vortice
Speed Controller
Run-on Timer
C5 0.5
Electronic overrun timer with
adjustable run-on time 0–21
minutes. Compact design
allows for easy installation.
Up to 300 watts.
Five speed controller for all
Vortice fan products.
Speed Controllers
ESA1
Electronic speed controllers
for stepless speed control of
single or three phase fans.
Star Delta Switch
DS2
On/off and reversing switch
for two speed, three phase
star/delta motors. Polymer
casing for surface mounting.
12 amps, 5.5Kw.
28
C PIR detects the prescence of a moving body
INFO HOTLINE 1300 883 544
ZNE
Temperature
Control
TA3
Robust electro / mechanic
thermostat for temperature
dependent on/off operation
for fans and heaters.
Commercial & Industrial
www.allvent.com.au
29
AXIAL and CENTRIFUGAL JET FANS
Car Park Jet Fans
IVAD / IVRD / IDV RANGE
Jet fans are used in car parks for daily ventilation
carrying out an impulse effect on the surrounding
air due to the generated air jet.
CFD: Smoke concentration after the exhaust
Car Park Ventilation
Induction Fans V2
A Car Park Ventilation system needs to control the
concentration of pollutants. Every day the car park will be
exposed to exhaust fumes from the cars driving in and out.
The second generation was implemented in 2007. This
new and unique generation of fans has been developed to
provide many technical and financial benefits and advantages,
using the unique patented outlet venturi and the ultra-flat
centrifugal impeller, resulting in a very low installation height
of 257mm.
The average length of stay in a car park is less than 1 hour.
Nevertheless, the system must be able to control the
indoor air quality and provide persons present with a
healthy environment.
Our research and development teams have designed the
induction fan to effectively control pollutants. One of the
reasons behind the slim casing design was to be able to
position the fans on the driving lanes where people will be
present. The induction fans, in combination with the supply
and exhaust ventilation, effectively flush the driving lanes with
fresh air.
Induction fans will give a constant airflow that is a constant
pulse and because the pulse is constant we call it thrust. With
this thrust the fan is pushing the surrounding air and, as the
fan is fixed to the ceiling, the surrounding air will be moved
forward. Furthermore the fan also induces turbulence in the
surrounding air, up to 19 times the air actually passing through
the fan.
30
INFO HOTLINE 1300 883 544
The minimised casing height in combination with the special
designed outlet nozzles enables a designer to position the fans
at the ideal location.
This flexibility allows for the following:
• A reduction in the number of thrust fans required (by up to
65%) due to improved system performance
• Lower energy consumption • Fewer cables, including ancillaries
• Lower installation costs
• Lower maintenance costs
CAR PARK JET FANS
Controls
ACCESSORIES FOR YOUR CONVENIENCE
Gas Controller Systems
Carbon Monoxide (CO) Transmitter
The DGC-05 gas controller fulfills the functions of monitoring
carbon monoxide (CO).
For the detection of carbon monoxide (CO).
The controller can monitor and process up to 98 digital
and/or analogue gas transmitters. Five free adjustable
alarm thresholds are provided per transmitter. For the
alarm messages, up to 30 alarm relays with potential freechangeover contact and up to 12 analogue outputs are
available.
In addition, the gas control is available with an uninterruptible
power supply supported by a rechargeable battery. The
optional data logger function permits to protocol all measured
values, alarms and faults.
CO transmitter including digital measurement value
processing and temperature compensation for the continuous
monitoring of the ambient air to detect carbon monoxide
concentrations. The transmitter possesses a standard analogue
output 4–20mA or 2–10 V DC.
Variable Speed Drives
A complete motor control solution is available utilising the
latest technology in VSD’s designed especially for the HVAC
industry.
www.allvent.com.au
31
TWIN NOZZLE CENTRIFUGAL JET FANS
IDV-HC Series
CARPARK VENTILATION FANS
Double-width plume gives double effective area.
Install half the number of units compared to
standard models.
Technical Data
Air Flow Speed
Max. Air Flow Volume
RPM
Sound Pressure Level
Nominal Motor Power
m/s
V m3/h
min-1
(dB(A)
kW
IDV-HC Sv2
22
6840
1420 High
60 High
1.3 High
720 Low
51 Low
0.22 Low
IDV-HC Lv2
28
11,160
1425 High
75 High
2.2 High
720 Low
53 Low
0.37 Low
Model
The dual purpose IDV-HC-v2 series garage ventilation fans are
designed to direct air through the car park.
The suction of the fan is through the fan guard and inlet cone
on the bottom of the fan. The discharge is through the outlets
at the front of the fan.
Dimensions
Sv2
The ventilator unit is directly driven by a standard electric
motor integrally mounted in the air stream, the impeller has
backward curved blades and is directly mounted on the shaft
of the integral motor.
The motor employed is of the type IP55. Insulation Class H.
The connection voltage for the motor is 400v/3ph/50Hz. The
ventilation unit must be correctly grounded at all times.
Features
• Wider, longer plumes
• Less fans required
• Reduced installation costs
• Cheaper running costs
• Low noise
32
INFO HOTLINE 1300 883 544
Lv2
Current
Nominal Weight ca.
Full Load
Initial
Amps
Amps
kg
3.0
1.15
82
5.0
2.0
120
CENTRIFUGAL JET FANS
IVRD Series
CARPARK VENTILATION AND EXTRACTOR FANS
Quiet and universal in application – setting
the standard in thrust and weight. Suitable for
ventilation of car parks with ambient temperature
from up to 40oC.
Technical Data
Max.
Nominal
RPM
Pressure
Motor
Wiring
Nominal
Anti Vibration
Initial
Diagram
Weight ca.
Mounts (4 pcs)
kW
Amps
Amps
Number
kg
73
1.0
3.3
20.5
498
63
SDZ 2
1455
76
2.20
4.6
34
498
72
SDZ 2
1455
Air Flow Speed
Level
Power
N
m/s
V m3/h
min-1
(dB(A)
500/4 43N
43
21.3
6100
1440
560/4 75N
75
25.2
8900
1420
Volume
Features
Current
Full Load
Thrust
Model
Air Flow
Sound
Type
Ref No
Dimensions
• Low noise emission
• Maximum thrust
• Easy and fast to install due to lightweight,
aluminium construction.
• Direct driven, centrifugal
43N
75N
www.allvent.com.au
33
AXIAL JET FANS
IVAD Series
CARPARK VENTILATION AND EXTRACTOR FANS
Slimline, compact, lightweight and powerful. Perfect
even in limited spaces. Suitable for ventilation of car
parks with ambient temperature from up to 40oC.
Technical Data
Model
315/2 25N
Thrust
Max.
Air Flow
Air Flow
Speed
RPM
Volume
Sound
Nominal
Pressure
Motor
Level
Power
Current
Wiring
Nominal
Anti Vibration
Mounts (4 pcs)
Full Load
Initial
Diagram
Weight ca.
N
m/s
V m3/h
min-1
(dB(A)
kW
Amps
Amps
Number
kg
Type
Ref No
25
15.9
4600
2840
58
1.10
2.4
16.6
498
37
SDZ 1
1454
Dimensions
Features
• Low noise emission
320
• Maximum thrust
270
ø14
• Direct driven, axial
345
• Easy and fast to install due to lightweight,
aluminium construction.
• Optionally fully reversible (Model IVA..R..)
440
750
1820
1963
320
345
2
440
34
INFO HOTLINE 1300 883 544
750
1
1
IVRD / IVAD JET FANS
Special Features
HIGH THRUST PERFORMANCE
IVRD Features
IVAD Features
High quality, powerful jet fan with optimal dimensions for
minimum space.
Silent and universal in application, setting the standard in
thrust and weight.
Casing
Casing
Casing from corrosion-resistant aluminium in compact design.
Aerodynamically-shaped inlet cone. Permanently optimal
surface protection by steel-powder coating.
Duct casing from corrossion-resistant aluminium with motor
support and ceiling suspension. Aerodynamically-shaped
inlet with safety guard and extract cone with adjustable guide
vanes. Fully reversible types with adjustable guide vanes on
both sides.
Impeller
High efficient centrifugal impeller with welded, backwardcurved blades. Dynamically balanced according to DIN ISO
1940-1, balancing quality 6.3.
Motor
IEC 3-phase standard motor protection to IP 55.
Installation
Assembly bracket integrated as standard. They are attached
directly to the ceiling by means of rawl plugs (accessories,
to be provided on site) at four fastening points. To avoid
vibration transmission the use of anti-vibration mounts is
recommended.
Electrical Connection
Terminal box from polymer fitted externally on casing as
standard (IP 55).
Impeller
High efficient impeller for unidirectional or reversible
operation. Dynamically balanced according to DIN ISO 19401, balancing quality 6.3. With aerodynamically-optimised
impeller from corrossion-resistant aluminium alloy, adjustable
at standstill.
Motor
IEC 3-phase standard motor protection to IP 55.
Noise Insulation
By polygon silencers on both sides. High quality casing from
aluminium, completely acoustically-lined inside with abrasion-proof
mineral wool according to DIN 4102 (not flammable) retained by
perforated steel sheet.
Installation
Mounting rails integrated in series. They are attached directly
to the ceiling by means of rawl plugs (accessories, to be
provided on site) at four fastening points. The use of antivibration mounts is recommended.
Electrical Connection
Terminal box from aluminium die-casting fitted externally on
casing as standard (IP 55).
www.allvent.com.au
35
PLATE AXIAL FANS
HQ and HW Series
COMPACT AND FULLY REVERSIBLE
A range of compact fixed-pitch, plate-mounted,
axial-flow fans suitable for wall or panel mounting.
Plate Axial Fan Features
Casing
Manufactured in galvanised sheet steel. Models HQ and HW
have the additional protection of two coats of light grey paint.
Speed Control
Both HQ and HW are speed controllable by voltage reduction
(transformer controller or electronic controller).
Impeller
Highly efficient, profiled seven blade impeller, dynamically
balanced and manufactured from impact-resistant polymers.
Suitable for -30oC to +60oC.
Reversed Operation
HQ and HW are reversible when wired to a DSEL reversing switch.
For reverse airflow direction allow for ¹/₃ drop in performance.
Motor
Totally enclosed, reversible motor with a die-cast aluminium
casing, protected to IP 54. Sealed-for-life ball bearings with
tropicalised protection of windings and radio suppression. All
models have automatic resetting thermal contacts wired in
series with the motor windings. Terminals in motor cap (IP 55).
Powder-coated motor side wire guard.
36
Sound Levels
Both sound power and sound pressure levels are shown on
each performance curve. Sound pressure levels are measured
at 4 metre in freefield conditions and are the calculated
average between the inlet and exhaust data.
Dimensions - HQ/HW Series
Fan
nominal
size in mm
Dimensions
A
B
C
D
E
F
G
H
200
204
203
50
100
100
310
280
6.5
250
254
280
60
100
100
360
30
9.0
315
319
345
65
160
160
440
410
9.0
355
359
390
70
190
230
475
440
9.0
400
404
440
70
200
200
525
490
9.0
450
454
490
90
220
220
575
535
9.0
500
504
550
90
220
270
655
615
9.0
560
560
630
140
210
260
730
675
11.0
630
630
700
150
200
390
810
750
11.0
710
710
810
220
390
410
895
810
11.0
INFO HOTLINE 1300 883 544
Installation
Installation in any position. Ensure that motor drainage holes
face downwards.
HQ and HW Series Quick Selection Guide
Single phase models 230 V / 1 ph. / 50 Hz SELECTION DATA
Fan Code
Square plate
Ring Plate
Speed
Air flow
Motor power
rpm
m3/hr
kW
Current temp.
Max. air flow
full load
standard
speed control
A
+ oC
+oC
Weight
Sound level @ 4m
Kg
dB(A)
HQW200/4
1360
144
0.03
0.11
60
40
2.7
30
HQW200/2
2300
253
0.07
0.26
60
40
2.7
43
HQW250/4
1380
267
0.04
0.20
60
40
7.5
44
HQW250/2
2590
531
0.23
1.10
60
40
6.5
63
HQW315/4
1405
589
0.13
0.60
60
40
8.0
51
HQW355/4
1405
844
0.19
0.95
60
40
9.5
55
HQW400/4
1320
1211
0.25
1.3
60
40
13.0
59
HQW450/6
960
1125
0.18
0.9
60
40
15.5
49
HQW450/4
1250
1494
0.49
2.10
60
40
15.5
62
HQW500/6
910
1492
0.22
1.10
60
40
17.3
52
HQW500/4
1410
2311
0.55
2.30
40
40
17.3
65
HQW560/6
955
2250
0.35
1.80
60
40
22.0
52
HQW560/4
1405
3586
0.90
4.50
40
40
25.0
62
HQW630/6
955
2922
0.45
2.50
60
40
25.0
55
HQW630/4
1415
4964
1.25
6.60
40
40
35.0
65
HQW710/6
925
3889
0.50
2.50
40
40
60.0
61
Weight
Sound level @ 4m
Three phase models 400 V / 3 ph. / 50 Hz SELECTION DATA
Fan Code
Speed
Air flow
Motor power
rpm
m3/hr
HQD315/4
1330
HQD315/2
HQD355/4
Current temp.
Max. air flow
full load
standard
speed control
kW
A
+ oC
+oC
Kg
dB(A)
589
0.10
0.25
60
40
8.0
51
2700
1114
0.51
1.00
50
40
8.0
70
1420
844
0.29
1.12
60
40
9.5
55
HQD355/2
2650
1556
0.88
1.60
50
40
14.0
74
HQD400/4
1380
1211
0.30
0.85
60
40
13.0
59
HQD400/2
2800
2347
1.40
2.80
40
-
17.5
78
HQD450/4
1350
1611
0.48
0.90
50
40
15.5
62
HQD500/4
1320
2164
0.61
1.25
40
40
17.2
65
HQD560/4
1380
3586
0.80
1.75
40
40
23.0
62
Square plate
Ring Plate
HQD 630/6
970
2922
0.49
1.80
60
40
28.0
55
HQD630/4/4
1390
4964
1.33
3.80
40
40
35.0
65
HQD740/4/4 26 deg
1370
6556
2.20
5.90
40
40
75.0
71
Performance Curves
Please refer to the main catalogue
www.allvent.com.au
37
GIGABOX
GB Series
QUIET AND MULTIPLE DISCHARGE
Particularly suitable for medium to higher air flow
volumes against high resistances in ventilation
systems of every type.
Compact frame construction and assembly-friendly
accessories make a variable and thus optimal adaptation
possible by simply repositioning the casing panels to the
structural conditions. With five or (with series T120) three
possible discharge directions this gives design flexibility to suit
all site conditions. All types have integrated crane hooks for
easier positioning as standard.
They are particularly suitable for medium to higher air flow
volumes against high resistances in ventilation systems of
every type. Furthermore, the new series GB.. T120 is suited for
extraction of dirty, hot air up to 120oC. Altogether, 26 models
are available with air flow volumes from 1,400 to 19,000 m3/h
for duct diameters 250 to 710 mm.
GigaBoxes from Allvent are delivered complete with:
• Discharge adaptor from square to circular ducted system
for low-loss discharge
• Flexible sleeves to reduce vibration transmission and for
the connection to ducts in the usual standard diameters
Backward curved high output centrifugal impeller guarantees
an energy-efficient operation at low noise emission.
The double-walled, removable 20 mm thick side panels are noise
and temperature insulated with flame retardant mineral wool.
This allows for a variable installation and simple inspection
access. Extensive accessories like wall bracket, condensate
collector including condensate spigot (for GB.. T120 included
in delivery), external weather louvres to cover the exhaust
opening, outdoor cover hood for protected outdoor
installation ensure for the necessary flexibility on site.
The T120 model impresses with outstanding benefits:
• Air flow temperature up to max. 120oC.
• Motor located outside of air flow.
• Temperature insulated partition panel between motor
and impeller, lined with 20 mm thick, flame-retardant
mineral wool.
• Easily accessible motor-impeller-unit, removable without
disassembling the system components.
• Inspection cover with handle, simply remove for cleaning
and maintenance.
• Condensate collector with condensate spigot included
in delivery.
• Accessory components suitable for use to max. 120oC.
For applications with high air flow temperatures and/or
steam/humidity present in the exhaust air, the GigaBox T120
is ideally suitable.
Ideal for application in exhaust air systems of process
technology or in commercial kitchens.
38
INFO HOTLINE 1300 883 544
Designed for exhaust air systems in
commercial kitchens the GigaBox GB.. T120
have motors located out of the air stream.
Easily accessible casing and double-walled
side panels makes cleaning simple with
grease dissolving agents and steam.
Call us today to find out more about the quite and powerful GigaBox.
Five removeable multifunction panels offer
almost unlimited flexibility in all applications.
GigaBox Models Available
Type GB..
GigaBox and Accessories
Type GB..T120
GBW 250/4
GBW 355/4 T120
GBW 315/4
GBD 355/4/4 T120
GBW 355/4
GBW 400/4 T120
GBD 355/4/4
GBD 400/4/4 T120
GBW 400/4
GBW 450/4 T120
GBD 400/4/4
GBD 450/4/4 T120
GBW 500/4
GBW 500/4 T120
GBD 500/4/4
GBD 500/4/4 T120
GBW 500/6
GBD 560/4/4 T120
GBD 560/4/4
GBD 630/4 T120
GBD 560/6/6
GBD 630/4/4
GBD 630/6/6
GBD 710/6/6
Optional EC motor available in GB.. models
Dimensions
Performance Curves
Refer to Helios Catalogue
Refer to Helios Catalogue
More about GigaBox...
www.allvent.com.au
39
GIGABOX
The GB series has flexible assembly by five possible discharge directions.
GigaBox Discharge Examples with Application
Straight-through Discharge Outdoor installation with wall bracket
(accessories).
40
INFO HOTLINE 1300 883 544
900 Discharge
Installation in the attic with antivibration mounts (accessories).
Discharge on both sides
Roof installation with outdoor cover
hood and external weather louvres
(accessories).
GigaBox Quick Selection Guide
Sound
Press.
Case
Breakout
Type GB..T120
LPA dB(A)
Sound
Air Flow Volume vm3/s Against Static Pressure
Press.
Intake
(ΔPstat.) in Pa
LPA
dB(A)
0
50
100
150
200
250
300
350
400
500
600
700
800
GBW250/4
27
39
389
319
244
147
GBW315/4
29
41
414
361
300
236
GBW355/4
34
46
817
747
675
505
258
GBD355/4/4
34
46
836
772
711
638
577
492
367
GBW400/4
38
50
1142
1092
1036
975
917
85
764
656
511
GBD400/4/4
38
50
1097
1031
961
889
811
725
628
469
114
GBW450/4
40
52
1514
1433
1361
1292
1217
1122
1006
867
692
GBD450/4/4
40
52
1514
1431
1344
1256
1161
1061
947
822
664
GBW500/4
45
57
2333
2336
2139
2042
1947
185
1744
1628
1506
1219
778
GBD500/4/4
44
57
2458
2367
2278
2189
2097
2006
1903
1789
1664
1369
947
GBW500/6
35
46
1600
1478
1347
1189
978
678
144
GBD560/4/4
44
57
3497
3397
3300
3203
3106
3011
2911
2811
2706
2461
2142
1731
1144
GBD560/6/6
35
48
2400
2261
2114
1953
1767
1539
1239
767
GBD630/4/4
48
61
4153
4058
3961
3869
3775
3683
3592
3500
3403
3194
2953
2675
2333
GBD630/6/6
43
56
3192
2992
2794
2567
2375
2103
1767
1356
792
GBD710/6/6
46
59
5194
4989
4783
4564
4333
4083
3811
3511
3178
2333
753
Type GB..T120
LPA dB(A)
0
50
100
150
200
250
400
500
700
800
GBW355/4
36
49
961
894
831
767
583
567
418
201
GBD355/4/4
36
49
964
908
846
778
697
594
469
192
GBW400/4
40
53
1369
1293
1217
1136
1053
942
806
622
439
GBD400/4/4
40
53
1353
1275
1193
1106
1014
900
76
581
381
GBW450/4
45
57
1975
1887
1800
1700
1625
1525
1426
1317
1208
917
528
GBD450/4/4
45
57
1994
1914
1833
1750
1653
1556
1450
1336
1206
897
372
GBW500/4
45
59
2318
2244
2158
2075
1989
1903
1800
1696
1575
1300
975
511
GBD500/4/4
45
59
2319
2239
2157
2081
1994
191
1833
1739
1642
1381
1061
533
GBD560/4/4
48
62
3417
3322
3247
3164
3078
2994
2910
2817
2722
2533
2336
2064
1671
GBD 630/4
53
67
3928
3867
3803
3742
3667
3594
3533
3469
3397
3242
3097
2908
2703
(ΔPstat.) in Pa
LPA
dB(A)
300
350
600
Call us today to find out more about the quite and powerful Gigabox.
www.allvent.com.au
41
CENTRIFUGAL FANS
Vertical Discharge
KITCHEN EXHAUST FANS
This series is a range of high performance all
metal fans for use in kitchen exhaust and general
ventilation applications. Motors are mounted out
of the air stream and wind bands are secured with
clip fasteners to allow easy access for servicing
and cleaning.
Construction
Technical Data
Fabricated from powder coated galvanised steel in compliance
with AS/NZS1668.1:1998 for kitchen exhaust systems. High
performance backward curved centrifugal impellers are driven
by TEFC motors incorporating sealed for life bearings. Class
F motors are rated to 80oC ambient air temperature. Class H
motors are rated to 120oC ambient air temperature. Available
in optional ColourbondTM colours.
Dimensions
42
A
B
C
D
E
F
Model
Full Load Current
kW
dBA @ 3m
KMV315-4DD
0.9
0.37
47
KMV315-6DD
1
0.37
41
KMV355-4DD
0.9
0.37
51
KMV355-6DD
1
0.37
43
KMV400-4DD
0.9
0.37
54
KMV400-6DD
1
0.37
45
KMV400-8DD
1.1
0.37
38
KMV450-4DD
1.7
0.75
57
KMV450-6DD
1.1
0.37
47
KMV450-8DD
1.2
0.37
40
KMV500-4DD
2.4
1.1
60
KMV500-6DD
1
0.37
50
KMV500-8DD
1.1
0.37
43
KMV560-4DD
4.4
2.2
65
KMV560-6DD
1.7
0.55
54
KMV560-8DD
1.1
0.37
44
KMV630-4DD
7.7
4
69
KMV630-6DD
2.6
1.1
57
KMV630-8DD
1.7
0.55
49
KMV710-6DD
4.8
2.2
61
KMV710-8DD
2.1
0.75
47
* Also available in 3 phase
KMV310
410
310
50
600
355
545
KMV350/400
500
400
50
690
450
600
KMV450/500/560
720
620
60
915
585
755
Performance Curves
KMV630/710
810
710
60
1135
655
865
Please refer to the main catalogue
INFO HOTLINE 1300 883 544
CENTRIFUGAL FANS
Roof Mounted
ROOF VENTILATORS
This series is a range of small diameter vertical
and horizontal discharge fans for general
ventilation applications. Suitable for medium air
flow and pressure duct systems.
Construction
Dimensions
Components are made from UV stabilised polymer, corrosion
protected steel and fibreglass. All models are fitted with bird
mesh as standard. Available in optional ColourbondTM colours.
Technical Data
Model
Vertical
Discharge
Power
Horizontal
Discharge
RCV190-2E
RCD190-2E
RCV220-2E
RCD220-2E
RCV220-4E
Speed
Sound
Base Dimensions
Motor
kW
FLA
Phase
RPM
dB(A)
@ 3m
A max
B min
0.07
0.32
1
2880
42
265
215
0.07
0.32
1
2880
42
380
325
0.08
0.34
1
2880
55
265
215
0.08
0.34
1
2880
55
295
245
0.08
0.34
1
1440
38
265
215
RCD220-4E
0.08
0.34
1
1440
38
295
245
RCV280-4E
RCD280-4E
0.08
0.38
1
1440
44
395
345
RCV280-6E
RCD280-6E
0.08
0.35
1
960
37
395
345
RCV315-4E
RCD315-4E
0.12
0.5
1
1440
46
395
345
RCV315-6E
RCD315-6E
0.12
0.5
1
960
38
395
345
RCV355-4E
RCD355-4E
0.3
1.12
1
1440
48
500
400
RCV355-6E
RCD355-6E
0.08
0.31
1
960
39
500
400
RCV400-4E
RCD400-4E
0.49
2.2
1
1440
53
500
400
RCV400-6E
RCD400-6E
0.15
0.68
1
960
45
500
400
RCV450-4E
RCD450-4E
0.69
3
1
1440
54
720
620
RCV450-6E
RCD450-6E
0.29
1.42
1
960
46
720
620
RCV500-4E
RCD500-4E
1.43
5.7
1
1440
58
720
620
RCV500-6E
RCD500-6E
0.5
2.34
1
960
44
720
620
Performance Curves
RCV560-6E
RCD560-6E
0.79
3.5
1
960
46
720
620
Please refer to the main catalogue
* Also available in 3 phase
www.allvent.com.au
43
ROOF MOUNTED FANS
SECD Series
EXTRACT OR SUPPLY
Low profile aluminium cowls to extract or supply
air through the roof for domestic and light
commercial applications.
Technical Data
Features
Air
• Fan incorporated in cowl
Model
Size
l/s
Fan
ALVSECD0530
150
130
Centrifugal
Extraction
• Aluminium cowl construction
ALVSECD0532
150
80
Axial
Extraction
• Pleasing aesthetics
ALVSECD0534
150
80
Axial
Supply
• High quality for longevity of operation
• Electrical connection can be made inside or outside roof space
(interior junction box included)
• Low noise within premises
• Dektite or aquaseal included (for metal-based roofs)
• Optional lead Dektite or aquaseal available (extra cost)
Cowls (Domestic/Light Commercial)
Technical Data
General purpose cowls used for relief air.
Model
Size
Description
ALVRCK 150M
150mm
Metal – roof
ALVRCK 150T
150mm
Tile – roof
ALVRCK 200M
200mm
Metal – roof
ALVRCK 200T
200mm
Tile – roof
• Supplied with 600mm tube
• Other sizes available: 100mm, 125mm, 250mm, 300mm
Roof Cowl Kit
44
INFO HOTLINE 1300 883 544
Cowl
Rubber Dektite
to suit metal roof
Aluminum Dektite
to suit tile roof
PEDESTAL, WALL AND PORTABLE FLOOR
Industrial Fan Range
AFFORDABLE AIR CIRCULATION
Industrial Pedestal Fan
Model
Industrial Portable Floor Fan
Size (mm)
V
Hz
W
rev/min
m3/min
Model
ALVPMF-65
650
240
50
230
1400
12,300
ALVFD-40
ALVPMF-75
750
240
50
350
1400
17,400
Size (mm)
V
Hz
W
rev/min
m3/min
400
240
50
110
1350
4,920
Industrial Wall Mounted Fan
Model
Size (mm)
V
Hz
W
rev/min
m3/min
ALVWMF-650
650
220
50
230
1400
205
ALVWMF-750
750
220
50
350
1400
290
www.allvent.com.au
45
HIGH VELOCITY AIR
Air Curtains
REDUCE ENERGY COSTS
Air Curtains create an invisible barrier separating
zones of different temperatures while preventing
pollutants (dust, odours, smoke etc) and insects
entering your work environment.
Features
Vortice Air Curtains work to circulate clean air within your
work zone and the whisper quiet operation ensures minimal
noise and impact in your environment.
• Elegant and modern design suitable for even the most
high tech settings
The air curtains allow customers and staff to enter and leave
freely without obstructing the passageway and providing
maximum visibility into the room.
• Brushed aluminium frontage with integrated intake
grille and rear panel in black painted sheet metal
• IR remote control
Air curtains can also be used inside the building to separate
rooms with different envirnmental conditions eg: heated
office areas with unheated warehouses, dining areas next to
kitchens. This facilitates the transit of staff and prevents odours
and vapours being transferred into from area to area.
• 2 operating speeds
• Tangential fans for quiet operation
• base opening allows air to escape
• Adjustable outlet vanes can direct outgoing steam of air
as desired
Technical Data
Model
46
INFO HOTLINE 1300 883 544
Weight
kg
V
Hz
Watts
Air Flow (m3/h)
dB(A) @ 2m
Dimensions
Min
Max
Min
Max
Min
Max
W x H x D(mm)
AD900
10
230
50
110
160
1100
1400
55
57
900x220x190
AD1200
12.5
230
50
150
200
1600
1900
56
58
1200x220x190
AD1500
15.5
230
50
180
230
2000
2500
57
59
1500x220x190
AD2000
20.5
230
50
300
350
2900
3600
59
61
2000x220x190
“We installed Allvent Air Curtains
to reduce energy costs for our air
conditioning and found the added
bonus of odours from our fishery not
entering the restaurant area.”
– Satisfied Customer
0
Allvent are the only stockist of the
2000mm wide Air Curtain unit.
The cost efficient solution for
wider doorways!
8–11.5
1.0
4–5
2.0
3–4.5
3.0
2–3.5
4.0
www.allvent.com.au
47
Industrial and Commercial Ventilation Notes
IDV-HC Series
IVRD Series
IVAD Series
HQ / HW Series
GigaBox
KMV Series Kitchen Exhaust
RCV / RCD Series Roof Mounted Ventilation
SECD Series Roof Mounted Extract or Supply
Industrial Cooling Fans
Air Curtains
48
INFO HOTLINE 1300 883 544
Heat
www.allvent.com.au
49
SHARE THE WARMTH
Heat Transfer Kit
EXTRACT AND SUPPLY
Transfer hot air from air conditioners and
heaters from one room to another.
Three kits specially designed to suit your
family’s needs.
Kit 1/1a: Room to Room
Kit 2: One Room to Two Rooms
Kit 1: ALV150HTKIT1
Kit 2:
• 1 x DF150 in-line mixed-flow fan
• 1 x DF150 in-line mixed-flow fan
• 1 x DF200 in-line mixed-flow fan
• 2 x 6WRC–150mm ceiling grilles
• 3 x 6WRC–150mm ceiling grilles
• 1 x 8WRC–200mm ceiling grille
• 1 x 6m/150mm insulated flex
• 2 x 6m/150mm insulated flex
• 3 x 6WRC–150mm ceiling grilles
• 1 x duct tape
• 1x 150mm Y fitting
• 1 x DBTO–200/150/150/150
• 1 x duct tape
• 1 x 6m/200mm insulated flex
153l/s 550m3/hr
Kit 1a: ALVA60HTKIT1A
91l/s 330m3/hr
ALV150HTKIT2
153l/s 550m3/hr
Kit 3: One Room to Three Rooms
Kit 3: ALV200HTKIT3
264l/s 950m3/hr
• 2 x 6m/150mm insulated flex
• 1 x duct tape
• 1 x A60 axial fan
• 2 x 6WRC–150mm ceiling grilles
• 1 x 6m/150mm insulated flex
• 1 x duct tape
50
INFO HOTLINE 1300 883 544
Also available:
Speed controllers are available
to allow easy airflow adjustment
for just the right amount of
coziness in your home.
Keep your family warm for less!
he
t
n
i
x
a
Rel
of
h
t
m
r
wa
wn
your o
home
Allvent Heat Transfer Kits are specially
designed to economically draw warmed air
from the room with the main heat source
(such as a fireplace or combustion stove)
and convey it to other rooms in your home.
Ideal to boost warmth and comfort levels in
cold bedrooms and chilly study areas.
www.allvent.com.au
51
INFRARED WALL HEATERS
Thermologika
COMMERCIAL AND DOMESTIC APPLICATIONS
Thermologika is suitable for domestic and
commercial applications when instant heat is
necessary or in places with direct or continuous
contact with the outside.
Technical Data
Model
V
Hz
W
A
Kg
IP
Thermologika
230
50
600/1200/1800
7.8
1.6
IPX4
Features
Dimensions
• Wall installation with compact dimension
• Ensures immediate comfort
• No moving parts, maximum silence
• Heat up time approx. 30 seconds
• Choice of 3 power outputs with a pull switch
• Can be switched on and off remotely
• Easy installation and maintenance
• Adjust to direct heat where needed
52
INFO HOTLINE 1300 883 544
Thermologika
A
B
C
540
123
100
INFRARED WALL HEATERS
Thermologika Soleil Plus
FOR INDOOR OR OUTDOOR USE
Thermologika is suitable for domestic and
commercial applications when instant heat is
necessary or in places with direct or continuous
contact with the outside.
Technical Data
Dimensions
Model
V
Hz
W
A
Kg
IP
Thermologika
Soleil Plus
230
50
1500
6.5
1.5
IPX5
Features
• Heat concentrated to target areas
• Wall or ceiling installation, horzontally or vertically
• Grille is sheered, bent, aluminium sheet
• Casing is extruded aluminium with
epoxy polyester resin paint
• Lamp: Halogen HeLen technology, highly efficient,
long lasting
Soleil Plus
A
B
C
395
130
120
• Strong and lightweight
• Immediate heat delivery
• High radiating efficiency
www.allvent.com.au
53
COMPACT WALL-MOUNTED FAN HEATERS
Microrapid Range
SAFE, STURDY, STYLISH
Microrapid series are particularly userfriendly while improving operational safety.
They are intended for primary heating in
situations where there is no central heating
or it is undersized.
Technical Data
Model
V
Hz
W
A
Kg
IP
Microrapid 2000 V0
230
50
800/1200/2000
8.7
4.2
IPX4
Features
Dimensions
• Small dimensions: ideal for cramped areas
• Splash protected, installation into damp environments
• Selectable heating power
• Extremely silent
• Resin parts have high mechanical strength at high
temperatures
• V0 self-extinguishing plastic
Microrapid 2000 V0
54
INFO HOTLINE 1300 883 544
A
B
C
863
258
109
Hygiene
www.allvent.com.au
55
DOLPHIN HAND DRYER
BC1800W
ECONOMICAL
Features
• Two year guarantee
• Die-cast white metal cover for strength and durability
• Superior technical design – dual thermal overload
protection on motor and heating element
• Certification of Compliance to foremost international safety
standards and performance standards
• ‘No touch’ operation by electronic infra-red sensor
maximises hygiene and economy of operation
Technical Data
Model
Dimensions (mm)
Finish
ALVBC1800W
H 220 x W 248 x D 170
White Die-cast Aluminium
• Fully automatic operation switches off within 3 seconds
of hand removal – infra-red sensor
• Power rating: Heating element 1700w
• 100w brushless motor (3450 rpm)
• Sound level: 63 +/- 3dB
DOLPHIN HAND DRYER
BC2200W
STYLISH AND ROBUST
Features
• Two year guarantee
• Die-cast white metal cover for strength and durability
• Superior technical design – dual thermal overload
protection on motor and heating element
• Certification of Compliance to foremost international safety
standards and performance standards
• ‘No touch’ operation by electronic infra-red sensor
maximises hygiene and economy of operation
Technical Data
Model
Dimensions (mm)
Finish
ALVBC2200W
H 210 x W 320 x D 175
White Die-cast Aluminium
• Fully automatic operation switches off within 3 seconds
of hand removal – infra-red sensor
• Power rating: Heating element 2100w
• 100w induction motor
56
INFO HOTLINE 1300 883 544
DOLPHIN HAND DRYER
BC2001
VELOCITY HIGH SPEED
Features
• Two year guarantee
• Auto resetting thermostat
• 1600w dryer
• 700w motor
• 900w heating element
• Automatic infrared sensor
• Adjustable air speed: 75–100m/second
Technical Data
• Dries hands in less than 10 seconds
Order code
Dimensions (mm)
Finish
BC 2001
H 301 x W 230 x D 189
Satin Stainless Steel
• Auto shut off in 60 seconds
• Air output to 100m/second
• Low energy usage – reduces power consumption by up to 70%
DOLPHIN HAND DRYER
BC2002
STYLISH AND ENERGY EFFICIENT
Features
• Two year guarantee
• Quality 304 Grade Stainless Steel body
• Operating power of only 1000w (500w heating element)
saving 80% of user’s energy costs
• Smallest dryer in the range – less than half the size of
equivalent high speed dryers
• Infrared, self adjusting sensor: 51mm–254mm range
Technical Data
Order code
Dimensions (mm)
dBA
Finish
BC 2002
H 230 x W 246 x D 145
75
Satin Stainless Steel
• Dryer delivers 101.7m3/hour (90m/s)
This dries hands in 10–15 seconds, reducing CO2 emissions.
• 29 000 rpm brush motor
O
• 55 C air output temperature
www.allvent.com.au
57
DOLPHIN HAND DRYER
BC2011
VELOCITY AIR SPEED
Features
• Two year guarantee
• Available in silver and white
• Auto resetting thermostat
• Rated power: 850w, 6.5A
• IP22 water splash proof
• High speed brushless DC motor
• Dries hands in 6–10 seconds
Technical Data
Model
Dimensions (mm)
BC 2011
BC 2011W
• Saves 70% of energy used by a standard hand dryer
• Re-useable filter
Finish
m/s
H 650 x W 300 x D 190
Silver
65 jet air flow
• Drip tray stops water running onto the floor
H 650 x W 300 x D 190
White
65 jet air flow
• Suitable for hotels, offices, stores and other public areas
• Smart upmarket look with LCD display
• Energy saving and environmentally friendly
DOLPHIN HAND DRYER
BC2006
VELOCITY SEMI-RECESSED
Features
• Two year guarantee
• Auto resetting thermostat
• 1600w dryer
• 350–700w motor (adjustable)
• 450–900w heating element (adjustable)
• Automatic infrared, self-adjusting sensor: 51mm–330mm
• Dries hands in less than 10 seconds
• Auto shut off in 60 seconds
Technical Data
• Air output at 75–100m, self-adjusting
Order code
Dimensions (mm)
Finish
BC 2006
H 513 x W 250 x D 62
Satin Stainless Steel
Recess dimensions: H 495mm x W 235mm x D 122mm
58
INFO HOTLINE 1300 883 544
• Low energy usage – reduces power consumption by up to 70%
• Available in polished stainless steel on request
Fan Selection Guide
To choose the right fan for your purpose, we need to
calculate the airflow required for your room in m3/hr.
Allvent has developed this easy-to-use four step guide
to determine your m3/hr number and help choose the fan
right for you.
Bathroom10
Toilet12
Laundry20
Kitchen25
Sub-floor6
Using the figure you calculated in Step 3, select the fan from the table which most
closely fits your needs.
We recommend that you choose the fan to the nearest value HIGHER than your number. For example, if
the number you calculated at the end of Step 3 is 260 m3/hr, choose a fan with a m3/hr higher than 260.
Model
m3/hr
Model
m3/hr
Model
m3/hr
Model
m3/hr
Model
m3/hr
150/6”AR
235
HR90
95
NVF13
180
100V0
180
ALVSECD0530
468
230/9”AR
480
HVR150
260
NVF15
270
125V0
250
ALVSECD0532
288
300/12”AR
1050
HV200
450
150V0
385
HV250
840
200V0
790
250V0
990
315V0
1740
Window/Wall
Wall/Ceiling
Ducted Ceiling
Inline Fan
External
(Roof Mounted)
www.allvent.com.au
59
60
INFO HOTLINE 1300 883 544
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement