HPE 3PAR StoreServ 9000 Storage
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Overview
HPE 3PAR StoreServ 9000 Storage
The HPE 3PAR StoreServ 9000 Storage is an enterprise-class flash array that helps you consolidate primary storage workloads - for
file, block, and object - without compromising performance, scalability, data services, or resiliency. This newest 3PAR model based
on the proven 3PAR architecture is purpose built for all-flash consolidation, delivering the performance, simplicity, and agility
needed to support your hybrid IT environment. HPE 3PAR StoreServ 9000 Storage is available in a single all-flash model, the 9450,
that offers rich Tier-1 data services, quad-node resiliency, fine-grained Quality of Service (QoS), seamless data mobility between
systems, high availability through a complete set of persistent technologies, and simple and efficient data protection with a flat
backup to HPE StoreOnce Backup appliances.
HPE 3PAR StoreServ 9000 Storage
Page 1
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Overview
Summary
Number of Controller Nodes
HPE 3PAR Gen5 ASICs
Processors
Total Cache
Total Cache per node pair
Maximum Host Ports
16Gb/s Fiber Channel Host Ports
10Gb/s iSCSI Host Ports
10Gb/s Ethernet Ports for File Persona
Built-in 10GbE Ports1
Number of Solid State Drives
Max Raw Capacity2
Maximum Usable File Capacity4
Capacity Details
RAID Levels
RAID 5 Data to Parity Ratios
RAID 6 Data to Parity Ratios
Drive Capacities (SSDs)5
Number of Add-on Drive Enclosures6
9450
2 or 4
4 or 8
4-8 x 10-core 2.4 GHz
869 GiB
448 GiB
80 ports
0 – 80 ports
0 – 40 ports
0 – 24 ports
2 – 4 ports
6 – 576
6000 TiB3
2 – 512 TiB
9450
RAID 0, 1, 5, 6
2:1 - 8:1
4:2, 6:2, 8:2, 10:2, 12:2, 14:2
400GB SSD, 1.92TB SSD, 3.84TB SSD, 7.68TB SSD, 15.36TB SSD
2 – 48 enclosures7
NOTE: Specifications are subject to change without notice.
Two built-in 10GbE ports per node pair can be used for Remote Copy (RCIP), maximum of 8 usable.
The minimum supported raw capacity is equal to 6 x Min drive size available.
3
For storage capacity, 1 GiB = 230 bytes and 1 TiB = 1,024 GiB
4
Usable file capacity supported for HPE 3PAR File Persona
5
SSDs are Solid State Drives
6
Each Drive Enclosure holds up to 24 small form factor (2.5”) drives in 2U
7
The recommended minimum is 4 drive enclosures per controller node pair
1
2
Host OS Support
Citrix® XenServer® | HP-UX® | IBM® AIX® | Microsoft® Windows® Server, including Microsoft® Hyper-V™ | Apple Mac OS
OpenVMS* | Oracle® Linux® (UEK and RHEL compatible kernels) | Oracle® Solaris | Ubuntu | VMware vSphere™
Red Hat® Enterprise Linux® | Red Hat® Enterprise Virtualization
SUSE® Linux Enterprise | SUSE® Linux Virtualization | IBM Virtualization | Oracle VM
For the latest information on supported operating systems refer to Single Point of Connectivity Knowledge for HPE Storage
Products (SPOCK): http://www.hpe.com/storage/spock
Page 2
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Service and Support and Warranty Information
Warranty
3 Year, On-site Warranty Service. 24x7 4-hour onsite response
The warranty on all HPE 3PAR StoreServ 9000 Solid State Drives is 5 years, 24x7 4-hour onsite
response. Please refer to the HPE 3PAR StoreServ 9000 Drives section for the complete list of SSD
SKUs. Hewlett Packard Enterprise warrants only that the Software media will be free of physical defects
for a period of ninety (90) days from delivery.
For more information about Hewlett Packard Enterprise's Global Limited Warranty and Technical
Support, visit: http://www.hpe.com/storage/warranty
NOTE: All currently available HPE 3PAR StoreServ SSDs carry a five-year warranty offering
unconditional replacement in case of drive failure, media wear-out, or both.
NOTE: For Storage Base SKUs and Drive SKUs the warranty only covers the HW and not the Allinclusive software that is included with the same SKUs.
Service and Support
Connect your devices
Protect your business beyond warranty with HPE Support Services
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and
stability. Our integrated portfolio of Services for storage help customers reduce costs, optimize data,
streamline storage management, and improve backup and recovery. HPE Support Services enable you
to choose the right service level, length of coverage and response time as you purchase your new
storage solution, giving you full entitlement for the support for need for your IT and business.
Unlock all of the benefits of your technology investment by connecting your products to Hewlett
Packard Enterprise. Achieve up to 77%1 reduction in down time, near 100%2 diagnostic accuracy and a
single consolidated view of your environment. By connecting, you will receive 24x7monitoring, prefailure alerts, automatic call logging, and automatic parts dispatch. HPE Proactive Care Service and
HPE Datacenter Care Service customers will also benefit from proactive activities to help prevent
issues and increase optimization. All of these benefits are already available to you with your server
storage and networking products, securely connected to Hewlett Packard Enterprise support.
1- IDC
2 – HP CSC reports 2014 - 2015
Optimized Care
HPE Proactive Care Advanced* - 24x7 coverage, three year Support Service
This services helps achieve a higher return on your product investment with personalized support from
a local assigned Account Support Manager who will share best practice advice and personalized
recommendations designed to help improve availability and performance to increase stability and
reduce unplanned downtime. Leverage your system’s ability to connect to Hewlett Packard Enterprise
for pre-failure alerts, automatic call logging and parts dispatch. For business critical incidents, this
service offers critical event management to reduce mean time to resolution. This recommendation
provides 24x7 coverage with four-hour response for hardware and collaborative support that offers
two-hour callback for supported software issues. Collaborative software management is included with
independent software vendors unless you have your software support from Hewlett Packard
Enterprise where we own all cases from start through to resolution.
https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA5-3259ENW.pdf
Standard Care
HPE Proactive Care* with 24x7 coverage, three year Support Service + 20 services credits for 1st
year
HPE Proactive Care gives customers an enhanced call experience plus helps preventing problems and
maintains IT stability by utilizing personalized proactive reports with recommendations and advice
when your products are connected to Hewlett Packard Enterprise. This Service combines three years’
proactive reporting and advice with our 24x7 coverage, four hour hardware response time when there
is a problem.
Page 3
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Service and Support and Warranty Information
https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf
Basic Care
HPE Proactive Care* with 24x7 coverage, three year Support Service
HPE Proactive Care gives customers an enhanced call experience plus helps preventing problems and
maintains IT stability by utilizing personalized proactive reports with recommendations and advice
when your products are connected to Hewlett Packard Enterprise. This Service combines three years’
proactive reporting and advice with our 24x7 coverage, four hour hardware response time when there
is a problem.
https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf
HPE 3PAR SSD Support 3PAR SSD Extended Replacement Program
Provides for the post warranty replacement of eligible HPE 3PAR SSDs under active HPE support
coverage in the event the SSD has reached its maximum usage limit based upon the HPE 3PAR SSD
Life-Left reading.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/a00000122ENW.pdf
HPE Services Support
Credits
Services Support Credits offer flexible services and technical skills to meet your changing IT demands.
With a menu of service that is tailored to suit your needs, you get additional resources and specialist
skills to help you maintain peak performance of your IT. Offered as annual credits, you can plan your
budgets while proactively responding to your dynamic business.
NOTE: HPE Proactive Care and HPE Proactive Care Advanced require that the customer connect
their devices to make the most of these services and receive all the deliverables.
Related Services
HPE 3PAR StoreServ 8000, 9000, and 20000 Storage Installation and Startup Service Hewlett
Packard Enterprise provides onsite deployment of your HPE 3PAR StoreServ 8000, 9000, and 20000
Storage arrays into your storage environment. This Service is included in all the levels of Care
mentioned above.
http://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA5-8035ENW.pdf
HPE 3PAR All-inclusive Multi-system Software Installation and Startup Service
This service, which provides installation and startup for the HPE 3PAR Remote Copy, Peer Motion, and
Peer Persistence functionality of HPE 3PAR All-inclusive Multi-system Software in your storage
environment, is designed to help you get HPE 3PAR All-inclusive Multi-system Software up and
running quickly and to provide a demonstration of the product’s key features using sample or test data
only
https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA6-6385ENW.pdf
HPE 3PAR All-inclusive Single-system Software Installation and Startup Service Complementing
your new HPE 3PAR All-inclusive Single-system software, this service provides the necessary activities
required to help you deploy Adaptive Optimization, Dynamic Optimization, File Persona, Priority
Optimization, System Reporter, Virtual Copy, and an overview of Virtual Domain and Virtual Lock. For
Virtual Copy, the service provides a demonstration of the product’s key features using sample or test
data only
https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA6-6549ENW.pdf
HPE 3PAR 8000, 9000, and 20000 Software Installation and Startup Service
Designed to provide a smooth startup, this service provides deployment of individual HPE 3PAR 8000,
9000, and 20000 storage software features, helping to ensure proper installation in your storage
environment as well as helping you increase the benefit from your storage investment.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA5-8036ENW.pdf
HPE 3PAR Peer Persistence Software Installation and Startup Service
Page 4
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Service and Support and Warranty Information
Provides implementation of the HPE 3PAR Peer Persistence Software feature. The service is designed
to help get HPE 3PAR Peer Persistence up and running quickly and to provide a demonstration of the
product's key features using sample or test data only.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-2772ENW.pdf
HPE Storage Transformation Workshop
Explore data management to business-aligned visions, covering cloud, object, end to end data
protection and BC/DR.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-9541ENW.pdf
HPE 3PAR StoreServ Data Migration
Proven methodology, expertise and tools to help you migrate data across your data center or around
the globe.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA5-3759ENW.pdf
HPE Storage Modernization Service
Modernize your storage environment to take better advantage of physical or virtualized server
environments, all flash, cloud, and object storage solutions.
http://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA5-8498ENW.pdf
Data Profiling Service
Let TS Consulting assess your current file storage and identify redundant, obsolete and trivial data –
simplifying your transformation to 3PAR and reducing migration costs.
HPE StoreServ Integration Service
Integrate your new HPE 3PAR StoreServ system so that it is agile, performs effectively, and scales to
rapid growth.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-9254ENW.pdf
HPE StoreServ Online Import Quick Start Service
Choose the most effective, appropriate methods for configuring and migrating to a HPE 3PAR
platform.
http://h20195.www2.hpe.com/v2/getpdf.aspx/4AA6-0422ENW.pdf
HPE EVA to 3PAR Acceleration Service - The HPE EVA to HPE 3PAR Acceleration Service provides
customers with OPEX and CAPEX savings as a result of your journey from HPE EVA to HPE 3PAR
StoreServ. This service provides customers with an alternative DIY ("do-it-yourself") data migration
option with guidance from TS Consulting Storage migration specialists.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-4234ENW.pdf
HPE SAN Deployment Service
Hewlett Packard Enterprise delivers complete design and implementation services for Fibre Channel,
FCoE, FCIP, SAS, and iSCSI SAN connectivity components.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/5981-8527EN.pdf
HPE Data Replication Solution Service for 3PAR Virtual Copy
This service enables snapshots and mirroring to facilitate data restores, minimize downtime for
backups, perform application testing and support data mining use with decision-support tools.
http://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA3-8107ENW.pdf
HPE Data Replication Solution Service for 3PAR Remote Copy
HPE Data Replication Solution Service for 3PAR Remote Copy Software configures real-time data
mirroring between local and remote 3PAR storage systems to safeguard critical business information.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA3-8627ENW.pdf
Page 5
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Service and Support and Warranty Information
HPE 3PAR Adaptive Optimization Policy Implementation Service
Provides analysis, recommendations, and implementation of HPE 3PAR Adaptive Optimization policies
to enable storage tiering using data collected from the HPE 3PAR Storage system over time.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA2-3842ENW.pdf
HPE Storage Virtual Volume Design and Implementation Service
When deploying an HPE Storage array, the HPE Virtual Volume Design and Implementation Service
provides the necessary activities required to design and implement a new virtual volume configuration.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA2-3764ENN.pdf
HPE Thin Volume Conversion Service
Provides evaluation and execution of conversion from standard to thin provisioned virtual volumes for
HPE 3PAR Storage. A service specialist advises the customer on HPE 3PAR Thin Provisioning best
practices, provides evaluation of potential disk capacity savings if target virtual volumes are converted,
and plans and implements thin conversion processing. The service leverages 3PAR thin provisioning
capabilities to help optimize storage capacity, reduce cost, increase agility and maintain performance.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA2-3842ENW.pdf
HPE Performance Analysis Service for HPE Disk Arrays
The service provides data collection, detailed I/O analysis and enhancement recommendations for HPE
3PAR StoreServ Storage disk arrays, HPE EVA P6000 Storage disk arrays and HPE XP Storage disk
arrays. HPE Performance Analysis Service for HPE Storage Disk Arrays provides a single engagement
concerning the performance of a single HPE Storage disk array.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/5982-6668EN.pdf
HPE Data Sanitization Storage and Server Services
These services provide the skilled resources and tools to help your organization address the need to
protect data when your organization is retiring systems, upgrading storage and servers, returning
leased equipment, or redeploying data storing devices. Using specialized software techniques, an HPE
service specialist or authorized service partner will help ensure that data cannot be reconstructed or
retrieved from hard disk media in your server and storage devices. These services offer you a smart
alternative or augmentation to physical hardware destruction by executing procedures to remove data
from disk media.
https://www.hpe.com/h20195/v2/GetPDF.aspx/5981-9510EN.pdf
HPE 3PAR Performance and Capacity Trending Service
HPE 3PAR Performance and Capacity Trending Service provides data collection, analysis, and reports
with key performance and capacity metrics for your HPE 3PAR StoreServ array. Through this service,
you will receive a specified number of reports describing long-term trends in performance and capacity
usage, and have the option to purchase additional reports. You will also receive briefing sessions
highlighting The Hewlett Packard Enterprise findings and recommendations.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA5-8792ENW.pdf
HPE 3PAR Health Check Service
The HPE 3PAR Health Check service is delivered as a single engagement, providing data collection,
analysis, report creation, and a briefing session concerning the performance of a single HPE 3PAR
StoreServ Storage System. This health check service is best for HPE 3PAR StoreServ Storage Systems
that have been installed and are in normal production mode. It can also be used to establish a baseline
for future reference to improve the effective use of your storage system.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-3404ENW.pdf
HPE 3PAR Storage Rebalance Service
The HPE 3PAR Rebalance Service helps balance data across an HPE 3PAR StoreServ Storage array to
take advantage of the capabilities of the array architecture. The service provides analysis, planning, and
implementation of data movement and/or physical movement of drive magazines within the array.
http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-0280ENW.pdf
Page 6
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Configuration Information
Customer Self Installation (CSI)
Customers have the option of self-installing the HPE 3PAR StoreServ 9000 Storage array. The Customer Self Installation option is
available for HPE 3PAR StoreServ 9000 Storage arrays that meets the following criteria:
• 2-node or 4-node configurations
• CTO configurations (factory integrated)
• Single rack (the physical Service Processor can be in a separate rack)
Customer technical profile
In order to successfully install the HPE 3PAR StoreServ 9000 Storage array the installer should:
• Have a good understanding and knowledge of Storage Area Networks, Fiber Channel fundamentals and a basic
understanding of TCP/IP and other networking protocols (DNS/NTP).
• Have a good understanding of server virtualization technology, in particular of Hypervisors such as VMware ESXi and
Microsoft Hyper-V.
• Be able to maintain and install server hardware and Microsoft Windows and/or Linux OS.
• Have experience creating Storage LUNs, presenting/exporting LUNs to a server and formatting the LUNs to make them
usable for applications.
• Be able to troubleshoot hardware and software issues using logs and documentation.
If the installer doesn’t meet the profile or is not comfortable with the self-installation process, Hewlett Packard Enterprise
recommends engaging the Hewlett Packard Enterprise sales representative or Hewlett Packard Enterprise Channel Partner to
purchase HPE deployment services.
Customer responsibilities
The Customer will:
• Ensure that the host and SAN environment is supported and compliant with HPE recommendations and best practices.
Host and SAN Implementation Guides are available at http://www.hp.com/go/hpsc. Support Matrix are available on
SPOCK (HP Storage Single Point of Connectivity Knowledge) http://www.hpe.com/storage/spock.
• Resolve any problems with their SAN and host environment, prior to installing the HPE 3PAR StoreServ 9000 Storage.
Customer Self Installation documentation
Prior to installing the HPE 3PAR StoreServ 9000 Storage array, the installer should thoroughly review the following documentation.
• HPE 3PAR StoreServ 9000 Storage Self-Install Guide: http://www.hpe.com/support/3PAR9000CSI
• HPE 3PAR StoreServ 9000 Storage Installation video: http://www.hpe.com/support/3PAR9000CSIVideo
• Forum on HPE 3PAR StoreServ 9000 Self-Install: http://www.hpe.com/forum/3PARCSIHELP
The Customer Self Installation option is available only for initial installs, not for upgrades. Customer Self Upgrade (CSU) is not
available for HPE 3PAR OS software on HPE 3PAR StoreServ 9000 Storage arrays. Customer Self Repair (CSR) information is
available at this link: http://h18033.www1.hp.com/hpe/support/selfrepair/ww/replace_part.asp?myinc=s008
NOTE: Customers performing a self-install (according to rules identified above) will not void their warranties and will be fully
supported.
Page 7
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Configuration Information
Step 1 - Choose the Base configuration and Controller Nodes
HPE 3PAR StoreServ 9000 configurations start with the selection of the Base. The Base includes the controller node chassis and
two controller nodes. Each Controller Node consists of CPUs, ASICs, Cache banks and connectivity options for the storage array.
HPE 3PAR StoreServ 9000 Storage Base
HPE 3PAR 9450 2-node Storage Base with All-inclusive Single-system Software
•
•
•
Q0E92A
A minimum of one (1) storage base must be ordered for each array.
Each storage base includes the controller node chassis and two (2) controller
nodes
Each controller node includes two (2) SAS adapters
HPE 3PAR StoreServ 9000 Controller Nodes
Add a pair of the HPE 3PAR StoreServ 9000 Controller Nodes to the 9000 Storage Base to configure a HPE 3PAR StoreServ
9000 4-node array.
HPE 3PAR 9450 Storage Node with All-inclusive Single-system Software
•
•
•
•
•
•
Q7F41A
Each Controller Node SKU represents a single (1) unit
Each Controller Node SKU includes two (2) SAS adapters
Controller Nodes are always ordered in pairs on a HPE 3PAR StoreServ 9000
Storage array
Only one (1) pair of 9450 Controller Nodes can be ordered per array
Each Controller Node SKU is loaded with All-inclusive Single-system Software
The Controller Nodes have built-in Gigabit Ethernet ports for management and
Remote Copy over IP
HPE 3PAR StoreServ 9000 Upgrade Controller Nodes
Use the HPE 3PAR StoreServ 9000 Upgrade Controller Nodes to increase the number of controller nodes on an existing
previously installed HPE 3PAR StoreServ 9000 array. Increasing the controller nodes on an existing array helps improve resiliency,
performance and increase scalability in a balanced fashion.
HPE 3PAR 9450 Upgrade Node with All-inclusive Single-system Software
•
•
•
•
•
Q0E94A
Each Upgrade Controller Node SKU represents a single (1) unit
Each Upgrade Controller Node SKU includes two (2) SAS adapters
Upgrade Controller Nodes are always ordered in pairs on a HPE 3PAR
StoreServ 9000 Storage array
Only one (1) pair of 9450 Upgrade Controller Nodes can be ordered per
array
Each Upgrade Controller Node SKU is loaded with All-inclusive Singlesystem Software
The Upgrade Controller Nodes have built-in 1Gb Ethernet port for
management and 10Gb Ethernet port for Remote Copy over IP
Page 8
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Configuration Information
Step 2 - Choose Drive Adapter
HPE 3PAR StoreServ 9000 Storage uses SAS drive adapters for backend drive connectivity. Two SAS adapters are included as part
of each controller node. Each SAS adapter on a controller node can connect up to 8 drive enclosures. HPE 3PAR StoreServ 9000
Storage arrays have 12Gbps SAS backend.
HPE 3PAR StoreServ 9000 Drive Adapters
Order the following SKU to configure a third SAS adapter on the HPE 3PAR StoreServ 9000 controller nodes. This is optional
because each controller node already includes 2 SAS adapters.
HPE 3PAR 9000 4-port 12Gb SAS Host Bus Adapter
•
•
Q0E96A
Two (2) SAS adapters are included as part of each controller node
A third optional SAS adapter can be ordered per controller node
Step 3 - Choose Host Adapter
Host adapters can be ordered separately to be installed in the field or they can be factory configured into controller nodes. Host
adapter cards provide the array with additional FC ports, with 10Gb/sec iSCSI ports, or 10Gb/sec Ethernet ports. The additional FC
ports can be used for multiple purposes including connection to hosts and connection to other HPE 3PAR StoreServ Storage
systems in a Remote Copy or Peer Motion relationship. The iSCSI ports permit host connection in iSCSI environments. The Ethernet
ports can be used to natively host various File protocols and core file data services.
HPE 3PAR StoreServ 9000 Host Adapters
HPE 3PAR 9000 4-port 16Gb Fiber Channel Host Bus Adapter
HPE 3PAR 9000 2-port 10Gb iSCSI Converged Network Adapter
HPE 3PAR 9000 2-port 10Gb Ethernet Host Bus Adapter
Q0E97A
Q0E98A
Q0E99A
•
•
A minimum of one (1) host adapter per node must be ordered.
The 16Gb Fiber Channel Adapter includes (4) 16Gb/s shortwave FC SFP+.
The 10Gb iSCSI Adapter includes (2) 10Gb/s shortwave SFP+. The 10Gb
Ethernet Adapter includes (2) 10Gb/s SR SFP+.
• Each node in a node pair must have the same number and type of adapters.
• The 4 ports of the FC adapter can be individually configured to connect to a
host or to a remote array in a Remote Copy configuration.
NOTE: Ethernet Adapters can be used only for File services connectivity
Step 4 - Choose Drive Enclosures
Add drive enclosures to include drives in the configuration (the controller nodes don’t include any drive). Drive enclosures can be
ordered separately for installation in the field, or they can be factory configured in a rack. Each drive enclosure supports twentyfour (24) small form factor 2.5” drives. The HPE 3PAR StoreServ 9450 supports up to forty-eight (48) drive enclosures.
Drive Enclosures
HPE 3PAR 9000 24-disk 2U SFF (2.5in) SAS Drive Enclosure
•
•
Q0E95A
A minimum of 2 drive enclosures is required per node pair.
Each drive enclosure includes 24 drive bays for small form factor 2.5”
drives.
Page 9
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Configuration Information
•
•
•
•
•
Drive enclosures by default are connected directly to the controller
nodes (direct connect). As an option, it is possible to have the drive
enclosures connected to the controller nodes in (2-level deep) daisy
chains.
The best practice is to balance the drive enclosures across the SAS
ports on each controller node.
With a four node configuration, the best practice is to attach the same
number of drive enclosures behind each node pair.
Drive bays that are not filled with a drive must be covered with a drive
blank to preserve proper air flow.
If future capacity upgrades are expected, include enough Drive
Enclosures so that there are some empty bays in each enclosure after
all drives are added.
Step 5 - Choose Drives
Drives are orderable at the time the array is purchased, or can be added in the future when additional capacity is required. HPE
3PAR StoreServ 9000 drives are sold as single drives.
HPE 3PAR StoreServ 9000 Drives
HPE 3PAR SSDs
HPE 3PAR FIPS
Encrypted SSD
HPE 3PAR 9000 400GB SAS SFF (2.5in) SSD with All-inclusive Single-system
Software
HPE 3PAR 9000 1.92TB SAS SFF (2.5in) SSD with All-inclusive Single-system
Software
HPE 3PAR 9000 3.84TB SAS SFF (2.5in) SSD with All-inclusive Single-system
Software
HPE 3PAR 9000 7.68TB SAS SFF (2.5in) SSD with All-inclusive Single-system
Software
HPE 3PAR 9000 15.36TB SAS SFF (2.5in) SSD with All-inclusive Single-system
Software
HPE 3PAR 9000 3.84TB SAS SFF (2.5in) FIPS Encrypted SSD with All-inclusive
Single-system Software
HPE 3PAR 9000 7.68TB SAS SFF (2.5in) FIPS Encrypted SSD with All-inclusive
Single-system Software
HPE 3PAR 9000 15.36TB SAS SFF (2.5in) FIPS Encrypted SSD with Allinclusive Single-system Software
•
•
•
•
•
•
Q0F40A
Q1J36A
Q0F41A
Q0F42A
Q0F43A
Q0F44A
Q0F45A
Q0F46A
The minimum recommended initial quantity is eight (8) SSDs per node
pair.
Minimum upgrade quantity is 4 drives per node pair or 2 drives per
enclosure, whichever is larger. Best practice is to run Autonomic
Rebalance (also known as tunesys) after adding the drives.
RAID 6 is recommended.
All drive enclosures must contain an even number of drives, with a
minimum of two.
A best practice is to add equal numbers of drives to all enclosures.
With a four node configuration, the best practice is to attach the same
number of drives to each node pair.
Page 10
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Configuration Information
•
Small Form Factor (SFF) drives must be loaded in pairs of identical
drives, beginning with the leftmost slot, slot 0, and filling to the right,
leaving no empty slots between drives.
HPE 3PAR Encryption HPE 3PAR 9450 Data Encryption LTU
License
HPE 3PAR 9450 Data Encryption E-LTU
•
•
•
•
•
•
•
•
•
L7F18A
L7F18AAE
An encrypted HPE 3PAR StoreServ array, i.e. any HPE 3PAR StoreServ
array that has the HPE 3PAR Data Encryption license activated or
intended to be activated, must have only self-encrypted drives installed.
A non-encrypted HPE 3PAR StoreServ array can have a mix of
encrypted and non-encrypted drives.
Customers have option to turn on encryption, non-disruptively, at any
time, even after data has been written to the system.
FIPS 140-2 Validated Self-Encrypting Drives (SEDs) have been certified
by the U.S. National Institute of Standards and Technology (NIST) and
Canadian Communications Security Establishment (CSE) as meeting the
Level 2 security requirements for cryptographic modules as defined in
the Federal Information Processing Standards (FIPS) 140-2 Publication
Strengthen the DAR solution with an optional FIPS 140-2 Level-2
validated external key manager. Supports KMIP 1.1 for key
management communications
Supports HPE Enterprise Secure Key Manager 4.0 and SafeNet
KeySecure k460 and k150 centralized key management
A data encryption license (LTU) is required to enable encryption on the
array. One encryption license is required for each encrypted array.
Once encryption is enabled on the HPE 3PAR StoreServ Storage, it
cannot be disabled.
The local key manager is included in the HPE 3PAR OS. There is not a
separately orderable part number for the local key manager.
Step 5 - Choose Service Processor Implementation
The HPE 3PAR Service Processor remotely monitors the HPE 3PAR StoreServ 9000 and enables remote servicing of the array.
The key capabilities of the Service Processor are to:
•
•
Enable rapid, proactive responses to issues
Provide a secure communication channel between the customer's data center and HPE 3PAR Central for:
Remote Online Software Upgrade --Upgrade software with no application disruption
Remote Diagnostics --Maintain key diagnostic information centrally on a historical basis
Remote Serviceability--Provide fast predictive response and remediation
Each HPE 3PAR StoreServ 9000 requires its own Service Processor. The Service Processor functions as the communication
interface between a customer's IP network and HPE 3PAR Central by managing all service-related communications. The Service
Processor leverages the industry-standard HTTP over Secure Sockets Layer (HTTPS) protocol to secure and encrypt data
communication. The Service Processor can be deployed either as a virtual Service Processor (VSP) or a physical Service Processor.
Virtual Service Processor
A virtual Service Processor is included free with the base HPE 3PAR Operating System. The virtual Service Processor can be
installed on a customer-provided VMware or Microsoft Hyper-V system that meets the following specifications:
•
Virtualization operating system
VMware vSphere ESXi 4.1, 5.0, 5.1, 5.5
Page 11
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Configuration Information
•
Microsoft Hyper-V Server 2008 R2, 2012 or 2012 R2
Server features
2 GB RAM (minimum for the vSP Virtual Machine)
256 GB free disk space (minimum for the vSP Virtual Machine)
NOTE: vSP storage must not reside on the array it is managing.
DVD ROM or DVD RW
1 Gb Ethernet port
For vSP on VMware, the server must be listed in the VMware Compatibility Guide
For vSP on Hyper-V, the server must be listed on the Windows Server Catalog
Physical Service Processor
The physical Service Processor is a dedicated storage appliance located within the storage rack providing close proximity to the
HPE 3PAR StoreServ 9000 Storage. The physical Service Processor is fully supported and maintained by HPE Services. The
physical Service Processor has serial port connectivity that provides maintenance access for trouble shooting capabilities.
If a VMware server is not available to run the virtual Service Processor, the physical Service Processor is the alternative choice for
remote monitoring and remote service. The physical Service Processor is available in two version: with Single Power Supply and
with Redundant Power Supply.
Service Processor
HPE 3PAR StoreServ Redundant Power Supply Service Processor
Q0F86A
HPE 3PAR Policy Server
HPE 3PAR Policy Server works to implement customer-configurable remote service access policies. Installed on a customerprovided host, Policy Server provides the customer with ultimate flexibility and control to allow or deny outbound communication
or remote service connections to and from an HPE 3PAR StoreServ Storage system. Policy Server also serves as the centralized
point for collecting and storing audit logs of all diagnostic data transfers and authorized remote service connections to and from all
configured HPE 3PAR Storage systems. HPE 3PAR Policy Server provides the
•
•
•
•
•
The customer has complete control over policy administration.
A centralized policy administration for all HPE 3PAR Storage systems is provided.
A centralized audit log to facilitate security audits is provided.
Up to 100 3PAR systems can be managed with a single 3PAR Policy Server license
Policy Server 6.1.5 can be run on a Virtual Machine. For the latest information on supported hypervisors, refer to Single
Point of Connectivity Knowledge for HPE Storage Products (SPOCK): http://www.hpe.com/storage/spock
HP 3PAR Policy Manager Software LTU
TE400B
Step 6 - Choose Cables
Cables are required on the HPE 3PAR StoreServ 9000 Storage for drive enclosure connections and for host connectivity. Copper
SAS cables are required for connecting the drive enclosures to the nodes on the base rack and for daisy chaining between adjacent
drive enclosures. Active Optical SAS Cables are required for connecting drive enclosures in adjacent racks to the nodes in the base
rack. OM4 Fiber Cables are required for host connectivity, Remote Copy, and Peer Motion.
Cables
SAS Active Optical Cables
HP External 0.5m (1ft) Mini-SAS HD 4x to Mini-SAS HD 4x Cable
HP External 2.0m (6ft) Mini-SAS HD 4x to Mini-SAS HD 4x Cable
HP 10m Mini SAS High Density Active Optical Cable
HP 25m Mini SAS High Density Active Optical Cable
691968-B21
716197-B21
E7V95A
E7V96A
Page 12
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Configuration Information
HP 100m Mini SAS High Density Active Optical Cable
E7V97A
OM4 Cables
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Optical splitters
HP Multi Fiber Push On to 4 x Lucent Connector 5m Cable
HP Multi Fiber Push On to 4 x Lucent Connector 15m Cable
K2Q46A
K2Q47A
Direct Attach Copper Cables*
HPE 3COM (H3C)
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HP X240 QSFP+ 4x10G SFP+ 1m DAC Cable
HPE X240 QSFP+ 4x10G SFP+ 3m DAC Cable
HPE X240 QSFP+ 4x10G SFP+ 5m DAC Cable
HPE ProCurve
HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable
Brocade
HPE 1m B-series Active Copper SFP+ Cable
HPE 3m B-series Active Copper SFP+ Cable
HPE 5m B-series Active Copper SFP+ Cable
Cisco
HPE C-series 3M Passive Copper SFP+ Cable
HPE C-series 5M Passive Copper SFP+ Cable
HPE 7m C-series Active Copper SFP+ Cable
HPE 10m C-series Active Copper SFP+ Cable
HPE BladeSystem
HP BLc 10G SFP+ SFP+ 3m DAC Cable
HP BLc 10G SFP+ SFP+ 5m DAC Cable
HP BLc 10G SFP+ SFP+ 7m DAC Cable
•
•
JD096C
JD097C
JG081C
JG329A
JG330A
JG331A
J9281B
J9283B
J9285B
AP818A
AP819A
AP820A
K2Q21A
K2Q22A
QK701A
QK702A
487655-B21
537963-B21
487658-B21
DAC cables are supported for 10GbE speeds with iSCSI and File
protocols.
Direct Connect between the host and storage is not supported
with DAC cables, they require the use of a switch.
For the latest information refer to Single Point of Connectivity
Knowledge for HPE Storage Products (SPOCK)
Step 7 - Choose Racking Options
Page 13
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Configuration Information
The HPE 3PAR StoreServ 9000 Storage is available factory integrated on the HPE Intelligent Series racks with the appropriate
power distribution units (PDUs). Alternatively, a third party rackmount kit can be purchased in cases where the HPE 3PAR
StoreServ 9000 Storage needs to be installed on any rack other than the Hewlett Packard Enterprise racks mentioned below.
HPE 42U 600mm x 1075mm Enterprise Shock Rack
HPE 600mm Rack Stabilizer Kit
HPE 42U 1075mm Side Panel Kit
HPE 42U 600mm x 1200mm Enterprise Shock Rack
HPE 42U 1200mm Side Panel Kit
HP 3PAR StoreServ Third Party Rack Mount Kit
•
•
•
BW904A
BW932A
BW906A
BW908A
BW909A
C8S86A
When installed on a 42U 1075mm rack (BW904A) the array uses horizontal modular
PDUs and can support up to 12 drive enclosures in the base rack.
When installed on a 42U 1200mm rack (BW908A) the array uses vertical PDUs and can
support up to 16 drive enclosures in the base rack.
Expansion racks can support up to 20 drive enclosures.
NOTE: The Third Party Rack Mount Kit is required for mounting the 3PAR StoreServ 9000
Node enclosure on third party racks. For mounting the drive enclosure, rail kits are included
with the product.
For more information on the HPE rack offerings, please see the following URL:
http://h18004.www1.hpe.com/products/servers/platforms/rackandpower.html.
For more information on rack options, see: http://www.hpe.com/products/rackoptions.
PDUs
HPE G2 Basic Mdlr 4.9kVA/C19 NA/JP PDU
HPE G2 Basic 4.9kVA/(20) C13 NA/JP PDU
HPE G2 Basic Modular 7.3kVA/C19 INTL PDU
HPE G2 Basic 7.3kVA/(20) C13 INTL PDU
HPE G2 Basic Mdlr 3Ph 8.6kVA/NA/JP PDU
HPE G2 Basic 3Ph 8.6kVA/C13 NA/JP PDU
HPE G2 Basic Mdlr 3Ph 11kVA/C19 INTL PDU
HPE G2 Basic 3Ph 11kVA/C13 C19 INTL PDU
HPE G2 Basic 3Ph 22kVA/(18) C13 INTL PDU
P9Q39A
P9Q41A
P9Q43A
P9Q45A
P9Q52A
P9Q54A
P9Q57A
P9Q58A
P9Q64A
For more information on PDUs,
see: http://h18004.www1.hpe.com/products/servers/proliantstorage/powerprotection/pdu.html.
Step 8 - Choose Software
Page 14
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Configuration Information
Hewlett Packard Enterprise provides an extensive selection of features for HPE 3PAR StoreServ Storage. The HPE 3PAR StoreServ
9000 includes as part of the array and drives the All-Inclusive Single-System Software which includes: OS Suite, Virtual Copy,
Adaptive Optimization, Dynamic Optimization, Priority Optimization, Virtual Domains, Virtual Lock, Online Import, File Persona,
Recovery Manager Central (RMC), and Smart SAN. Additional software can be purchased by ordering the All-inclusive Multi-system
Software, a frame license that includes Peer Motion, Remote Copy, Peer Persistence, and Cluster Extension. The Data-at-Rest
Encryption Software completes the portfolio of software available with HPE 3PAR StoreServ Storage.
For more information regarding HPE 3PAR 9000 software SKUs
see: http://h20195.www2.hpe.com/v2/GetPDF.aspx/c04199812.pdf
All-Inclusive Single-System Software
The All-Inclusive Single-System Software is included as part of the array and offers all the software titles necessary to run a single
HPE 3PAR Storage array.
HPE 3PAR Operating
System Software
The HPE 3PAR Operating System Software Suite gives you everything you need to get up and
running quickly and efficiently. It is the foundation software of HPE 3PAR StoreServ Storage,
combining advanced virtualization capabilities with simple storage management, high efficiency,
and world class performance.
HPE 3PAR Virtual Copy
HPE 3PAR Virtual Copy software protects and shares data affordably with rapid recovery using
reservation-less, non-duplicative, copy-on-write snapshots.
HPE 3PAR Adaptive
Optimization
HPE 3PAR Adaptive Optimization improves storage utilization by enabling cost-optimized
storage tiering.
HPE 3PAR Dynamic
Optimization
HPE 3PAR Dynamic Optimization delivers the required service levels for the lowest possible
cost throughout the data lifecycle.
HPE 3PAR Priority
Optimization
HPE 3PAR Priority Optimization assures service levels with QoS controls for mission critical
applications.
HPE 3PAR Virtual Domains
and Virtual Lock
With HPE 3PAR Virtual Domains and HPE 3PAR Virtual Lock software, you can segregate
access and deliver robust storage services for different applications and user groups with
additional security attached to the retention of storage volumes.
HPE 3PAR Online Import
HPE 3PAR Online Import Software is the first do-it-yourself data migration tool for enterprise
Storage Area Networks. Unlike traditional block migration approaches, Online Import Software
enables customers to migrate storage volumes from HPE EVA Storage, EMC, Hitachi, IBM
Storage to HPE 3PAR StoreServ Storage systems online and without complex planning or
dependency on extra tools.
HPE 3PAR File Persona
Software
This software enables rich set of file protocol services, core file data services and an Object
Access API to extend the spectrum of primary storage workloads natively addressed by HPE
3PAR StoreServ 9000 Storage. With this solution, the architectural benefits of HPE 3PAR
StoreServ 9000 Storage can be extended to use cases such as: home directories and user
shares; content management and collaboration; data preservation and governance; and custom
cloud applications.
HPE Recovery Manager
Central (RMC) for VMWare
Protect your business critical applications without impacting performance using HPE RMC
software. With this automated, non-intrusive software, the simplicity and performance of local
Page 15
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Configuration Information
vSphere, MS SQL, Oracle
and more
and remote snapshots can be combined with the reliability and cost effective retention of
deduplicated backups to protect any application data stored on 3PAR arrays. Based on your
RTO objectives, retain the space-efficient snapshots on the 3PAR array itself or offload them to
a StoreOnce Backup system using fast, efficient, Express Protect Backups. Based on your RPO
objectives, generate as many application-consistent recovery points as desired for VMware VMs,
MS SQL and Oracle databases or automate the protection workflow for any application data on
3PAR using the RMC REST API SDK. NOTE: RMC for Oracle is supported for Oracle running
on RHEL and OL platforms
HPE 3PAR Recovery
Manager for Hyper-V (RMH)
Protect your Microsoft Hyper-V environment with HPE 3PAR Recovery Manager for Microsoft
Hyper-V and the HPE 3PAR VSS Provider software, included in this software bundle. By
leveraging HPE 3PAR Virtual Copy software, RM-H enables administrators to non-disruptively
create space-efficient, application-consistent, point-in-time snapshots to protect and recover
Hyper-V Virtual Hard Disks (VHDs) and individual VMs.
HPE 3PAR Recovery
Manager for Exchange (RME)
Protect your Microsoft Exchange environment with HPE 3PAR Recovery Manager for Microsoft
Exchange and the HPE 3PAR VSS Provider software, included in this software bundle. By
leveraging HPE 3PAR Virtual Copy software, RM-E enables administrators to non-disruptively
create space-efficient, application-consistent, point in time snapshots to protect and recover
Exchange databases and mailboxes.
HPE 3PAR Recovery
Manager for Oracle (RM-O)
Protect your Oracle environment running on Solaris, HP-UX or IBM AIX platforms with HPE
3PAR Recovery Manager for Oracle. By leveraging HPE 3PAR Virtual Copy software, RM-O
enables Oracle administrators to non-disruptively create space-efficient, application-consistent,
point-in-time snapshots to protect and recover Oracle databases and instances. For Oracle
environments running on RHEL or Oracle Linux, please refer to RMC for Oracle above.
HPE Smart SAN
HPE Smart SAN for HPE 3PAR makes end-to-end SAN configuration and management simple
and autonomic, reducing the probability of errors through SAN automation. It is an application
embedded in the SAN components (array, hosts and switches) that enables the 3PAR to
automate configuration for settings and policies across the SAN. Smart SAN features enable
customers to automate peer zoning, resulting in the creation of fewer zones, and enables
configuration of zones in minutes, not hours.
HPE StoreFront Remote
SaaS Portal
The HPE StoreFront Remote SaaS Portal provides proactive tools and integrated data collection
from the HPE 3PAR StoreServ Storage arrays that call home to deliver unique insights and
analytics all in one dashboard. Identify capacity and performance issues early through intuitive
capacity and performance trend analysis and forecasting. These valuable analytics help
maximize asset utilization and optimize the datacenter with recommendations and remedial
actions when issues arise. Users can log into http://www.storefrontremote.com to claim their
arrays and get access for free.
All-inclusive Multi-system software
The All-inclusive Multi-system software is an optional software suite that includes Peer Motion, Remote Copy, Peer Persistence, and
Cluster Extension.
HPE 3PAR Peer Motion
HPE 3PAR Peer Motion enables load balancing at will wherein, movement of data and
workloads between arrays is initiated without impacting applications, users or services.
HPE 3PAR Remote Copy
HPE 3PAR Remote Copy offers simple and cost effective data protection for efficient multitenant disaster recovery.
Page 16
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Configuration Information
HPE 3PAR Peer Persistence
HPE 3PAR Peer Persistence software enables HPE 3PAR StoreServ systems located at
metropolitan distances to act as peers to each other, presenting a nearly continuous storage
system to VMware vSphere hosts connected to them.
HPE 3PAR Cluster
Extension
HPE 3PAR Cluster Extension Software offers rapid automated protection against application
downtime from fault, failure, or site disaster. CLX integrates with the Windows OS clustering
software and HPE 3PAR Remote Copy to automate failover and failback between sites
Step 9 - Choose File Controller
With HPE 3PAR StoreServ File Controller you get an efficient, bulletproof, and effortless way to provide file storage from HPE 3PAR
StoreServ Storage. 3PAR StoreServ File Controller saves you time and money by supporting hundreds to thousands of concurrent
users and diverse file workloads .It also has non-intrusive data deduplication that provides an average 50-60% in space savings. It
provides security through features such as built-in encryption, sophisticated access controls, online snapshots, and the ability to run
endpoint protection and backup software onboard so that data is protected at rest and in flight. HPE 3PAR StoreServ File
Controllers are clustered file gateway configurations with transparent failover and online rolling maintenance updates that deliver
continuous availability of data to users, servers, and applications. With a straightforward and consistent management experience, it
also provides robust capabilities for demanding 24 x 7 file storage environments.
For more details on the specifications and data services offered by the HPE 3PAR StoreServ File Controller please refer to the
following link: http://www8.hpe.com/h20195/v2/GetHtml.aspx?docname=c04637524
Page 17
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Appendix
Physical Dimensions
Width in/cm
Depth in/cm
Height in/cm/U
Weight lb/kg
42U 1075mm Intelligent Series Rack
42U 1200mm Intelligent Series Rack
HPE 3PAR 9450 2N Storage Base
(2 controller nodes, 2 SAS HBAs)
HPE 3PAR 9450 Controller Node
(2 SAS HBAs)
HPE 3PAR 9000 2U SFF SAS Drive
Enclosure (without drives)
Service Processor
23.54/597.9
23.54/597.9
17.3/44
44.3/1125.2
51.19/1300.2
32.1/81.6
79/2006.6
79/2006.6
13.88/35.25/8
451/205
531/241
47.7/21.6
12.7/32.2
27.2/69.1
3.2/8.2/8
48.15/21.8
Supported Host FC Connections
FC Connector Type from Storage System to
Host Port
FC Cable Core Diameter
Connector Boot Length
38/17.3
37.48/17
LC to LC
OM4
Standard
Power and Heat
Single Phase Power Supply Requirements (per rack or cabinet)
NEMA (North America, Taiwan, Philippines & Japan)
Input Voltage (VAC)
220 (200 - 240)
Frequency (Hz)
50 - 60
Circuit Breaker Maximum
30 A per PDU (de-rated to 24 A)
Power Plugs
(4) L6-30P with 1+1 redundant (Base and Exp racks)
Power Connectors
(4) L6-30C with 1+1 redundant (Base and Exp racks)
Power Receptacles
(4) L6-30R with 1+1 redundant (Base and Exp racks)
IEC (International)
Input Voltage (VAC)
Frequency (Hz)
Circuit Breaker Maximum
Power Plugs
Power Connectors
Power Receptacles
220 (200 - 240)
50 - 60
32 A per PDU
(4) IEC 60309-332P6 (32A) with 1+1 redundant (Base and Exp racks)
(4) IEC 60309-332C6 (32A) with 1+1 redundant (Base and Exp racks)
(4) IEC 60309-332R6 (32A) with 1+1 redundant (Base and Exp racks)
Three Phase Power Supply Requirements (per rack or cabinet)
NEMA (North America, Taiwan, Philippines & Japan)
Input Voltage (VAC)
200 - 240 p-p
Frequency (Hz)
50 - 60
Circuit Breaker Maximum
48 A per PDU (de-rated to 27.71 A per phase)
Power Plugs
(4) L15-30P with 1+1 redundant (Base and Exp racks)
Power Connectors
(4) L15-30C with 1+1 redundant (Base and Exp racks)
Page 18
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Appendix
Power Receptacles
IEC (International)
Input Voltage (VAC)
Frequency (Hz)
Circuit Breaker Maximum
Power Plugs
Power Connectors
Power Receptacles
(4) L15-30R with 1+1 redundant (Base and Exp racks)
200 - 240 p-n; 380 - 415p-p
50 - 60
16A per phase per PDU (Base and Exp racks)
(2) IEC 60309-516P6W (16A) with 1+1 redundant (Base and Exp racks)
(2) IEC 60309-516C6W (16A) with 1+1 redundant (Base and Exp racks)
(2) IEC 60309-516R6W (16A) with 1+1 redundant (Base and Exp racks)
Refer to the HPE Power Advisor online tool for power consumption, heat loading, and circuit sizing information available
at https://paonline56.itcs.hpe.com
Environmental Specifications
Operating Temperature
Shipping Temperature (Controller Node)
Shipping Temperature (Drive Enclosure)
Operating Altitude (ft/m) max.
Shipping Altitude (ft/m) max.
Humidity
Shipping Humidity
Operating Vibration
Non-operating Vibration
Operating Shock (Controller Node)
Operating Shock (Drive Enclosure)
Non-operating Shock
Raised Floor
Maximum Exhaust Air Flow
Acoustics
Sound pressure level measured per ISO 7779
specifications during normal operating fan
conditions
Electromagnetic Compatibility
41° to 104° F (5° to 40° C) – Reduce rating by 1° F for each 1000 ft (1.8°
C/1,000 m)
-22° to 140° F (-30° to 60° C). Maximum rate of change is 20° C/hr (36° F/hr)
32° to 140° F (0° to 60° C). Maximum rate of change is 20° C/hr (36° F/hr)
10,000 ft / 3,048 m
40,000 ft / 12,192 m
10% to 90% non-condensing
10% to 90% non-condensing
0.25G, Sine, 5-500 Hz; 0.25 GRMS, Random 5-500 Hz
0.5G, 5 - 500 Hz, Sine; 0.5 GRMS, Random, 5-500Hz
5G, 11ms, half-sine
5G, 11ms, half-sine
10G, 11ms, half-sine
Recommended
Per Controller Node – 157 CFM
Per Drive Enclosure – 81 CFM
Fan Speed
(RPM)
5600
8500
4-way
Node
76.7
87.1
Fan Speed
(RPM)
5580
16500
Drive
Enclosure
43
64
CISPR 22:2008/ EN55022:2010 Class A
CISPR 32:2015 / EN 55032:2015 Class A
CISPR 24:2010/ EN 55024:2010
IEC 61000-3-2: 2014/ EN 61000-3-2: 2014
IEC 61000-3-3:2013/ EN 61000-3-3: 2013
AS/NZS CISPR22: 2009 +A1:2010 Class A
AS/NZS CISPR 32:2013
CNS 13438:2006 Class A
47 CFR Part 15 Subpart b Class A
ICES-003 Issue 6 Class A
V-3/2015.04
RRA KN 32 Class A
Page 19
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Appendix
RRA KN 35
Safety
IEC 60950-1:2005 (2nd Edition); +A1:2009 +A2:2013
EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013
IEC 62368-1:2014 ed 2
EN 62368-1:2014
EN 62479:2010
CNS 14336-1 2nd Edition
UL 60950-1-07 2nd Ed. +A1:2011 +A2:2014
CAN/CSA C22.2 No. 60950-1-07 +A1:2011 +A2:2014
CSA/UL 62368-1:2014
Certifications / Markings
cTUVus Mark
TUV GS-mark
CE Mark
FCC Class A
IC Class A
VCCI Class A,
BSMI RoHS
BIS
KCC
EAC
RCM
Ukraine
WEEE
China RoHS
Morocco
Nordic text
NOTE: Specifications are subject to change without notice.
Page 20
QuickSpecs
HPE 3PAR StoreServ 9000 Storage
Summary of Changes
Date
05-Jun-2017
Version History
Version 1
Action
Created
Description of Change
Create first version
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
a00005876enw- 15897 - Worldwide - V1 – 05-June-2017
Page 21
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement