Application Tooling - MS Hi-Tech

Application Tooling - MS Hi-Tech
Date of issue: January 2014
Date of issue: January 2014
Application Tooling
6
6.1 Application Tooling for Cable Ties
Manual Processing Tool with Plastic Housing
EVO7, EVO7SP
308
302
MK7
309
303
MK9
311
MK7HT
309
MK9HT
312
Product Selection
Flowchart for Optimum Tool Selection
Technical Information
How to use a cable tie tool
304
Pneumatic Tensioning Tool with Metal Housing
Manual Processing Tool for cable ties with low profile head
MK10-SB
306
MK20, MK 21
306
Manual Processing Tool with Metal Housing
MK3SP
307
MK6
311
298
MK3PNSP2
307
Pneumatic Tensioning Tool with Plastic Housing
Manual Processing Tool, simple version
MK7P
310
MK9P
313
MK9PSST
314
Date of issue: January 2014
Tool Overview for Cable Ties
6
Application Tooling
6.2 Application Tooling for Non Shrinkable Tubing
Manual Processing Tool for Metal Ties MBT- and AMT-Series
HDT16
315
Manual Processing Tool for Metal Ties MBT- and MAT-Series
Three-Pronged for sleeves and grommets
NA
319
MK9SST
314
VA2.5/5 - Reinforced
320
KST-STG200
315
K, S, SS
321
Manual Processing Tool for Metal Ties MLT-Series
MTT4
6.2 Application Tooling for Identification
316
Manual Processing Tool for Metal Ties
THT
Manual Tool for Helafix HCR
Helafix HCT Application tool
322
316
6.2 Application Tooling for Heat Shrinkable Tubing
Electrical Hot Air Tool
H5002- handy tool
317
H5004 - for professional use
317
Gas powered Hot Air Tool
Date of issue: January 2014
E4500
318
299
Find more information in our
Engineered Solutions Catalogue
in chapter 6.1.
Date of issue: January 2014
Automatic Cable
Tying Systems
Autotool 2000 – automated solutions
Date of issue: January 2014
For more information
please contact us!
www.HellermannTyton.co.uk
Application Tooling
6.1
Product Selection
Application Tooling for Cable Ties
MK10-SB
see page 306.
MK20, MK21
see page 306.
MK3SP
see page 307.
MK3PNSP2
see page 307.
EVO7 / EVO7SP
see page 308.
MK7
see page 309.
MK7HT
see page 309.
MK7P
see page 310.
MK6
see page 311.
MK9
see page 311.
MK9HT
see page 312.
MK9P
see page 313.
HDT16
see page 315.
KST-STG200.
see page 315.
MK9SST
see page 314.
MK9PSST
see page 314.
MTT4
see page 316.
THT
see page 316.
302
Further information and products at www.HellermannTyton.co.uk/a302
Date of issue: January 2014
Processing Tools for Metal Ties
Application Tooling
6.1
Product Selection
Product Selection
Cable tie
Attributes
Tool
Page
MK10-SB
306
MK20
306
MK10-SB
306
MK21
306
MK3PNSP2
307
MK7P
310
MK9P
313
EVO7 / EVO7SP
308
MK3SP
307
MK7
309
MK7HT
309
MK6
311
MK9
311
MK9HT
312
4.8 mm
bandwidth
no
4.8 mm
4.8 mm
yes
standard
cable ties
bandwidth
tool must
have
automatic
cut-off
4.8 mm
yes
pneumatic
4.8 mm
no
bandwidth
4.8 mm
yes
Date of issue: January 2014
metal
cable ties
tool must
have
automatic
cut-off
no
yes
bandwidth
16.0 mm
MK9PSST
314
no
bandwidth
13.0 mm
MK9SST
314
16.0 mm
HDT16
315
12.3 mm
KST-STG200
315
12.0 mm
MTT4
316
7.9 mm
THT
316
pneumatic
bandwidth
Further information and products at www.HellermannTyton.co.uk/a303
303
Application Tooling
6.1
Technical Information
How to use a cable tie tool (using an MK7 as an example)
1. Rough adjustment (1) depending on cable tie, and set according
to details in the user instructions. Value is displayed in the
viewing window (2).
4. Push the tool with the open side of the tool head (5) over the free
strip end and guide in the direction of the bundle until the tool
head buts on the tie head (4).
2. Use fine adjustment (3), if necessary, to set the desired value.
5. Pull manual lever one or more times to the stop. Once the
pre-selected tension is reached, the free tie end is automatically
cut off flush with the tie head.
3. Lay cable tie around the bundle and guide strip end through the
cable tie head (4). Tighten tie firmly enough that one stroke of
the tool is enough to tension and cut off.
Tool testing - Determination of tensions
To date, no generally applicable test method has been established
on the market. The companies within the HellermannTyton group
work with a usual force meter with minimum 10 kHz frequency of
data sampling to determine the tensile forces of the tools and to
guarantee the quality of the tools.
It is more difficult to test cable tie tools than would appear at first
glance. It is of supreme importance to comply with a standardised
test procedure and consistent test conditions. This means e.g. the
size and thus the cross-section of the cable ties, but also the water
content of the tie. A test using different ties and / or different
conditioning can easily lead to different values.
In general, the speed of cut-off, the position of the tool with
respect to the cable tie, the condition of the wearing parts in the
tool and the state of the cable tie play a fundamental role in the
determination of tensile forces.
Therefore we must point out that any values we provide must only
ever be regarded as guide values for your information. The values
cannot be transferred into practice 'one for one'.
In our user instructions, we specify an adjustment range for each
type of cable tie. If tension values must be documented or comply
with a specification, we recommend that you adjust them with
the aid of the force meter. Also, as a guideline, half the minimum
holding strength of the cable tie should be used as tensile force.
The minimum tensile strength (also referred to as minimum
unlocking strength) is the least force which the cable tie can
withstand before it tears or stretches. This strength is determined
using a threaded tie, hence the following formula should be
used for guidance as to the correct tensile force of the tool:
Min. tensile strength
= rec. tensile force
2
Example:
225 N min. tensile strength
T50R =
2
304
Further information and products at www.HellermannTyton.co.uk/a304
Date of issue: January 2014
225 N 112.5 N rec. tensile force according
=
2
to formula
Application Tooling
6.1
Technical Information
The tensile force can of course be adjusted up or down, in line with the corresponding applicatoin.
Please bear in mind that this statement applies only to HellermannTyton products. Cable ties from other manufacturers may require a higher
or lower force setting.
In order to secure the device after it has been adjusted using the force meter against manipulation or unintentional maladjustment,
HellermannTyton offers an adjustment safety cap (Art. No.: 110-07200 for MK7, MK7HT, MK7P, MK9, MK9HT, MK9SST, MK9P) which you
can push onto the device after removing the adjustment unit (loosening a screw is all it takes to remove).
After a period of time, to be defined, you test the device again and if necessary re-adjust it. The problem of determination of forces depends
on the individual case and has no direct connection with the quality of our product. An exact value for each setting (e. g. in Newtons),
without stating a tolerance, cannot be confirmed.
Test set-up with a usual force meter (Chatillon DFS-II) and EVO7 cable tie tool.
The following describes how to check the tension force of a manual
tensioning tool.
1. Lay the cable tie (green) into the fixture (A).
2. Bring the nose piece of the tensioning tool (B) flush to the test
block (C).
3. Insert the strap of the cable tie into the tensioning tool and pull
the strap flush against the fixture (A).
4. Re-set the force meter (D) to zero.
5. Pull the trigger of the tensioning tool continuously until the cable
tie is cut.
6. The tension force achieved at the cut off point is determined.
Your contact and our partner for the testing of cable tie tools:
AMETEK GmbH
Mr. Sancar Eser
Rudolf-Diesel-Straße 16
40670 Meerbusch
Germany
Telephone: +49 2159 913684
Fax: +49 2159 9136684
E-Mail: [email protected]
Date of issue: January 2014
Website: www.ametek.de
Further information and products at www.HellermannTyton.co.uk/a305
305
Application Tooling
6.1
Application Tooling for Cable Ties
Manual Tensioning Tool for Cable ties with low
profile head
• MK10-SB up to 9.5 mm strap width
Features and Benefits
• Ideal for easy handling of entire HellermannTyton RPE and
PE-Series
• Tensions and cuts off pre-looped cable ties flush at the head
MK10-SB.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
9.5
2.5
0.33 kg
110-10001
MK10-SB
All dimensions in mm. Subject to technical changes.
Manual Tensioning Tool for Cable Ties,
simple version
• MK20 up to 4.8 mm strap width
• MK21 up to 7.6 mm strap width
Features and Benefits
• Lightweight, ergonomic tools
• For tensioning and cutting HellermannTyton standard cable ties
4.8 - 7.6 mm wide
• MK20 and MK21 ideal for on-site assembly
• Mounted and pre-tensioned ties are cut off by twisting tool
MK20, MK21.
Tension.
Twist to cut.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
MK20
4.8
1.5
0.05 kg
110-20006
MK21
7.6
2.5
0.05 kg
110-21016
All dimensions in mm. Subject to technical changes.
306
Further information and products at www.HellermannTyton.co.uk/a306
Date of issue: January 2014
Apply.
Application Tooling
6.1
Application Tooling for Cable Ties
Manual Tensioning Tool with Metal Housing
• MK3SP up to 4.8 mm strap width
This tough metal tool MK3SP is used by harness makers for the
automotive industry and white goods as well as in the aerospace,
railway and medical industry.
Features and Benefits
• Tough metal tool for HellermannTyton plastic cable ties up to
4.8 mm width
• For consistent tensioning and automatically flush cutting
• Infinitely adjustable tensioning force
• Reliable and low maintenance
MK3SP.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
MK3SP
4.8
-
Replacement Blade
Weight
Article-No.
1.5
0.33 kg
110-03500
-
0.01 kg
110-03524
All dimensions in mm. Subject to technical changes.
Pneumatic Tensioning Tool with Metal Housing
• MK3PNSP2 up to 4.8 mm strap width
Features and Benefits
• Pneumatic tensioning tool
• Tough metal housing
• For cable ties up to 4.8 mm width
• For consistent tensioning and automatically flush cutting
• Infinitely adjustable tension force
• High application speed
• Reliable and low maintenance
MK3PNSP2.
Non oiled / oiled
Air Pressure (min.)
3 Bar
Air Pressure (max.)
6 Bar
Hose Internal Diameter
4.0 mm
LxHxW
approx. 225 x 140 x 40mm
Specifications
CE, GS
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
4.8
1.5
0.56 kg
110-03400
Compressed-air hose
-
-
0.35 kg
110-30002
Replacement Blade
-
-
0.01 kg
110-30101
TYPE
MK3PNSP2
Date of issue: January 2014
Air Supply
All dimensions in mm. Subject to technical changes.
Please note! Not all products listed on this page may have this approval. For product specific approvals please refer to the Appendix.
Further information and products at www.HellermannTyton.co.uk/a307
307
Application Tooling
6.1
Application Tooling for Cable Ties
Manual Tensioning Tool with Plastic Housing
• EVO7 up to 4.8 mm strap width
Features and Benefits
• Ergonomic, slip-proof handle for a comfortable and secure grip
• Extremely low maintenance
• Fast and precise application with minimum effort
(TLC mechanism)
• Convenient and simple tension adjustment
• Extended, slim nose for use in narrow spaces
• Housing made of resilient and lightweight glass fibre-reinforced
polyester
• Standard grip span (90 mm) and short grip span (80 mm) available
EVO7.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
EVO7
4.8
1.5
0.275 kg
110-70129
EVO7SP
4.8
1.5
0.275 kg
110-70130
-
-
-
110-70106
BLADEKIT
All dimensions in mm. Subject to technical changes.
TLC-Technology: Tension - Lock - Cut
The new EVO7 protects muscles and joints and increases effectiveness
•Lessrecoilshockreducesimpacttotheoperator‘shand
•Applicationofforceissignificantlyreduced
One Step to the Web!
308
3. Cut: Innovative, effortless and less recoil shock cut-off function.
Further information and products at www.HellermannTyton.co.uk/a308
Date of issue: January 2014
1: Tension: Tie is tensioned as usual.
2: Lock: When the desired tension is met the locking mechanism locks the tie
in place.
Application Tooling
6.1
Application Tooling for Cable Ties
Manual Tensioning Tool with Plastic Housing
• MK7 up to 4.8 mm strap width
The MK7 tensioning tool is used by harness makers. Based on the
US Military Specification (MIL) and the German Military Specification
(VG), the MK7 is also used to apply cable ties in all military vehicles
and aircrafts. Other applications can be seen within electrical
installation eg. in buildings or production plants.
Features and Benefits
• Light glass-fibre-reinforced housing
• Ergonomic design
• For ties up to 4.8 mm width
• Consistent tensioning and automatically flush cutting
• Infinitely adjustable tension force combined with three-step
quick adjustment
• MIL and VG approved
TYPE
MK7.
Strap Width
max. (G)
Strap Thickness
max.
MK7
Weight
Article-No.
4.8
1.5
0.29 kg
110-07500
Replacement Blade
-
-
0.01 kg
110-07511
Lock cap tensioning knob
-
-
0.011 kg
110-07200
All dimensions in mm. Subject to technical changes.
Please note! Not all products listed on this page may have this approval. For product specific approvals please refer to the Appendix.
Manual Processing Tool with Plastic Housing
• MK7HT up to 4.8 mm strap width
MK7HT application tool is mainly used to apply cable ties in harness
making industries.
Features and Benefits
• Light glass-fibre-reinforced housing
• Ergonomic design
• For cable ties up to 4.8 mm width
• MK7 HighTension version with higher tension force than MK7
• Consistent tensioning and automatically flush cutting
• Infinitely adjustable tension force combined with three-step
quick adjustment
MK7HT.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
MK7HT
4.8
1.5
0.29 kg
110-07000
Replacement Blade
-
-
0.01 kg
110-07511
Lock cap tensioning knob
-
-
0.011 kg
110-07200
Date of issue: January 2014
All dimensions in mm. Subject to technical changes.
Further information and products at www.HellermannTyton.co.uk/a309
309
Application Tooling
6.1
Application Tooling for Cable Ties
Pneumatic Tensioning Tool with Plastic Housing
• MK7P up to 4.8 mm strap width
The MK7P pneumatic bundling tool sets a new benchmark for the
rational application of ties in the industrial production process.
Improved compressed air supply moves the tensioning piston faster
than in comparable tools.
Features and Benefits
• Pneumatic tensioning tool
• Light glass-fibre-reinforced housing
• For cable ties up to 4.8 mm width
• For consistent tensioning and automatically flush cutting
• Infinitely adjustable tension force
• High application speed
MK7P.
The easy to use quick-set-knob.
Air Supply
Non oiled / oiled
Air Pressure (min.)
3 Bar
Air Pressure (max.) 6 Bar
Hose Internal
Diameter
4.0 mm
LxHxW
approx. 220 x 170 x 40 mm
Specifications
CE, GS
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
MK7P
4.8
1.5
0.43 kg
110-07100
Compressed-air hose
-
-
0.35 kg
110-30002
Replacement Blade
-
-
0.01 kg
110-07111
Lock cap tensioning knob
-
-
0.011 kg
110-07200
Please note! Not all products listed on this page may have this approval. For product specific approvals please refer to the Appendix.
310
Further information and products at www.HellermannTyton.co.uk/a310
Date of issue: January 2014
All dimensions in mm. Subject to technical changes.
Application Tooling
6.1
Application Tooling for Cable Ties
Manual Tensioning Tool with Metal Housing
• MK6 up to 9.0 mm strap width
Features and Benefits
• Tough metal tool
• For cable ties up to 9.0 mm width
• For consistent tensioning and automatically flush cutting
• Infinitely adjustable tension force
• Reliable and low maintenance
MK6.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
9.0
-
MK6
Replacement Blade
Weight
Article-No.
2.0
0.52 kg
110-06000
-
0.01 kg
110-06026
All dimensions in mm. Subject to technical changes.
Manual Tensioning Tool with Plastic Housing
• MK9 up to 13.5 mm strap width
Features and Benefits
• Glass-fibre-reinforced housing
• Ergonomic design
• For HellermannTyton plastic cable ties up to 13.5 mm width
• Consistent tensioning and automatically flush cutting
• Infinitely adjustable tension force combined with two-step
quick adjustment
• MIL and VG approved
MK9.
TYPE
MK9
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
13.5
2.0
0.385 kg
110-09500
Replacement Blade
-
-
0.01 kg
110-09511
Lock cap tensioning knob
-
-
0.011 kg
110-07200
Date of issue: January 2014
All dimensions in mm. Subject to technical changes.
Please note! Not all products listed on this page may have this approval. For product specific approvals please refer to the Appendix.
Further information and products at www.HellermannTyton.co.uk/a311
311
Application Tooling
6.1
Application Tooling for Cable Ties
Manual Tensioning Tool with Plastic Housing
• MK9HT up to 13.5 mm strap width
The MK9HT boasts especially high tensioning forces. Ideal for
applications where larger cable ties need to be securely fastened,
such as in truck and bus construction.
Features and Benefits
• Glass-fibre-reinforced housing
• Ergonomic design
• For cable ties up to 13.5 mm width
• MK9 HighTension version with higher tension force than MK9
• Consistent tensioning and automatically flush cutting
• Infinitely adjustable tension force combined with two-step
quick adjustment
MK9HT.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
MK9HT
13.5
2.0
0.385 kg
110-09000
Replacement Blade
-
-
0.01 kg
110-09511
Lock cap tensioning knob
-
-
0.011 kg
110-07200
312
Further information and products at www.HellermannTyton.co.uk/a312
Date of issue: January 2014
All dimensions in mm. Subject to technical changes.
Application Tooling
6.1
Application Tooling for Cable Ties
Pneumatic Tensioning Tool with Plastic Housing
• MK9P up to 13.5 mm strap width
The MK9P is constructed with heavy duty parts to ensure optimum
performance. It is ideally designed to apply heavy-duty ties that are
used in vehicle construction like trucks, busses and railways.
Features and Benefits
• Pneumatic tensioning tool
• Glass-fibre-reinforced housing
• For cable ties up to 13.5 mm width
• For consistent tensioning and automatically flush cutting
• Infinitely adjustable tension force
• High application speed
• Holding ring for a balancer
• Option of lower or upper air attachment
MK9P.
MK9P is also available with upper air attachment.
TYPE
MK9P
Air Supply
Non oiled / oiled
Air Pressure (min.)
3 Bar
Air Pressure (max.)
6 Bar
Hose Internal Diameter
4.0 mm
LxHxW
approx. 280 x 200 x 55mm
Specifications
CE, GS
Strap Width
max. (G)
Strap Thickness
max.
Weight
Air att.
Position
Article-No.
13.5
2.5
0.91 kg
Lower air connection
110-09100
13.5
2.5
0.91 kg
Top air connection
110-09110
Compressed-air hose
-
-
0.35 kg
-
110-30002
Lock cap tensioning knob
-
-
0.011 kg
-
110-07200
Replacement Blade
-
-
0.01 kg
-
110-09111
Date of issue: January 2014
All dimensions in mm. Subject to technical changes.
Please note! Not all products listed on this page may have this approval. For product specific approvals please refer to the Appendix.
Further information and products at www.HellermannTyton.co.uk/a313
313
Application Tooling
6.1
Application Tooling for Cable Ties
Manual Tensioning Tool for Metal Ties MBT- and
MAT-Series
• MK9SST up to 13.0 mm strap width
Features and Benefits
• Glass-fibre-reinforced housing
• Ergonomic design
• Consistent tensioning and automatically cutting of metal ties
MBT / MAT-series
• Infinitely adjustable tension force combined with two-step
quick adjustment
MK9SST.
TYPE
MK9SST
Replacement Blade
Strap Width
max. (G)
Strap Thickness
max.
13.0
-
Weight
Article-No.
0.3
0.6 kg
110-95000
-
0.01 kg
110-95011
All dimensions in mm. Subject to technical changes.
Pneumatic Tensioning Tool with Plastic Housing
• MK9PSST up to 16.0 mm strap width
TYPE
MK9PSST
MK9PSST.
Air Supply
Non oiled / oiled
Air Pressure (min.)
3 Bar
Air Pressure (max.)
6 Bar
Hose Internal Diameter
4.0 mm
LxHxW
approx. 280 x 200 x 55 mm
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
16.0
0.7
0.91 kg
110-95350
Replacement Blade
-
-
-
110-95307
Lock cap tensioning knob
-
-
0.011 kg
110-07200
All dimensions in mm. Subject to technical changes.
314
Further information and products at www.HellermannTyton.co.uk/a314
Date of issue: January 2014
Features and Benefits
• Unique levels of repeatability and accuracy
• High application speed and low maintenance
• Improved compressed air supply for faster tensioning
piston movement
• Shorter processing time and greater volume of connecting
tie application
• Ergonomic design
• Automatic ejection of cut-off cable tie end
• Ideally designed to apply stainless steel MBT-Series up to
16.0 mm width
• Air pressure between 3 and 6 bar
Application Tooling
6.1
Application Tooling for Cable Ties
Manual Tensioning Tool for Metal Ties MBT- and
AMT-Series
• HDT16 up to 16.0 mm strap width
Features and Benefits
• Two way nose piece for use with both MBT-Series and AMT-Series
stainless steel cable ties
• Easy adjustment of the handles to ensure the most ergonomic
position for the operator
• Integrated cutting mechanism delivering a flush cut and
professional finish every time
• The ideal tool for achieving a perfect installation of MBT and
AMT cable ties
HDT16.
TYPE
Strap Width
max. (G)
Article-No.
HDT16
16.0
110-40000
All dimensions in mm. Subject to technical changes.
Manual Tensioning Tool for Metal Ties MBT- and
MAT-Series
• KST-STG200 up to 12.3 mm strap width
Features and Benefits
• Tough metal tool
• Operator controlled tensioning
• Cut off by pulling the hand lever
KST-STG200.
TYPE
KST-STG200
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
12.3
0.3
0.561 kg
110-09950
Date of issue: January 2014
All dimensions in mm. Subject to technical changes.
Further information and products at www.HellermannTyton.co.uk/a315
315
Application Tooling
6.1
Application Tooling for Cable Ties
Manual Tensioning Tool for Metal Ties MLT-Series
• MTT4 up to 12.0 mm strap width
Features and Benefits
• Tough metal tool
• Simple ratchet operation, easy to use
• Operator controlled tensioning and cutting facility
MTT4.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
MTT4
12.0
0.7
0.78 kg
110-04000
All dimensions in mm. Subject to technical changes.
Manual Tensioning Tool for Metal Ties
• THT up to 7.9 mm strap width
Features and Benefits
• Ergonomic T-Handle design with rubber grip
• Suitable for MBT cable ties (4.6 mm and 7.9 mm)
• Simple tensioning mechanism coils the strap tail quickly without
cut off
T-Handle Tensioning tool.
TYPE
THT Tool
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
7.9
1.0
0.145 kg
110-09970
316
Further information and products at www.HellermannTyton.co.uk/a316
Date of issue: January 2014
All dimensions in mm. Subject to technical changes.
Application Tooling
6.2
Application Tooling for Heat Shrinkable Tubing
Electrical Hot Air Tool
• H5002 - handy tool
For applying heat shrinkable products like thin walled shrink tubing and
Moulded Shapes.
Features and Benefits
• Lightweight and compact hot air tool
• Enables comfortable, fatigue-free work
• Temperature electronically controlled from 100- 600 °C, cold air
step of 50 °C
• Air-flow regulation adjusted in two stages (300 l/min and
500 l/min)
H5002 - The light, convenient hot-air tool.
TYPE
Air Flow
l/min
Operating
Temperature
Standby
Temp. °C
Wattage
H5002
300 - 500
+100 °C to +600
°C
50 °C
2,000 W
Z3 Reflector
-
-
-
Z4 Wide Slot
Nozzle
-
-
-
Operational
Voltage
Weight
Article-No.
230 V AC ~ /
230-240 V
0.9 kg
391-50200
-
-
50 g
391-50500
-
-
50 g
391-50600
Subject to technical changes.
Electrical Hot Air Tool
• H5004 - for professional use
H5004 electrical Hot Air Tool is designed for shrinking down many
heat shrinkable products like thin wall tubing, with and without
adhesive, End Caps, and Moulded Shapes.
Features and Benefits
• Professional hot air gun
• Temperature electronically controlled
• Air flow regulation
• Equiped with LED temperature indication enableling precise
temperature adjustment
H5004 - for professional use.
Accessories suitable for both H5002 and H5004.
Air Flow
l/min
Operating
Temperature
Standby
Temp. °C
Wattage
Operational
Voltage
Weight
Article-No.
150 - 500
+50 °C to +650
°C
50 °C
2,300 W
230-240V, 50Hz
1.13 kg
391-50400
Z3 Reflector
-
-
-
-
-
50 g
391-50500
Z4 Wide Slot
Nozzle
-
-
-
-
-
50 g
391-50600
TYPE
Date of issue: January 2014
H5004
Subject to technical changes.
Further information and products at www.HellermannTyton.co.uk/a317
317
Application Tooling
6.2
Application Tooling for Heat Shrinkable Tubing
Gas powered Hot Air Tool
• E4500
The E4500 hot-air gun Starter Kit is ideal for working in cramped
spaces or where there is no power supply. The Kit includes a E4500
Hot Air Tool with protective spring, gas cartridge P445, Reflector
Nozzle Z2 and Flat Nozzle Z3. The Hot Air Tool is suitable for
shrinking all types of heat shrink products including tubing, shapes
and cable repair sleeves. It can also be used for the bending and
shaping of PVC pipes, soft soldering of copper pipes, drying,
defrosting (of locks) , heating and paint stripping.
Features and Benefits
• Cordless hot air gun works with special gas cartridge
• Does not need any power supply
• Suitable for outdoor use
• Designed for heat shrink tubing, end caps and moulded shapes
• Supplied with protective spring, two nozzles and a gas cartridge
• Allows precise working in any position even in restricted spaces
• Can be operated on its stand for hands free use
• Light weight tool
• Operating time of cartridige: approx. 1.5 hours
• With easy Piezo ignition
One Step to the Web!
TYPE
E4500-H with heat protecting spring.
Practical hot air gun kit E4500 with accessories.
Gas cartridge P445.
Description
Article-No.
E4500
GAS-HEATGUN4500
Hot air gun with protective spring incl. gas cartridge, reflector nozzle Z2
and flat nozzle Z3
391-90002
P445
P445
P445 Refill Gas Cartridge (Methyl Acetylene Propadiene, Butane, Propane)
391-90101
Z2 Deflector Nozzle
Z2
Deflector Nozzle
391-90300
Z3 Reduction Nozzle
Z3
Reduction Nozzle
391-90001
318
Further information and products at www.HellermannTyton.co.uk/a318
Date of issue: January 2014
Subject to technical changes.
Application Tooling
6.2
Application Tooling for Non Shrinkable Tubing
Three-Pronged Pliers for Sleeves and Grommets
• NA
Three-pronged expansion tools are used to ensure speedy and
precise application of expandable markers and sleeves.
Features and Benefits
• To easy affix expandable sleeves of every type onto
cables/connectors
• Sleeve simply slide onto the prongs
• Push pliers and pull over cable
• Close pliers, sleeve is placed easily
• Hellerine lubricant recommended for easy operation
Fast, secure application with the NA three-pronged pliers.
Replacement prong NA0/1
Replacement prong NA1K/3
Replacement prong NA4/5
Replacement prong NA8/10
Bundle Ø
min.
TYPE
Bundle
Ø max.
Three-prong pliers max.
application diameter
ØD
max.
Max. length
of marker
Article-No.
NA/01
1.3
1.8
10.5
28
621-10001
NA1K/3
2.5
5.0
11.0
28
621-10103
NA4/5
7.5
10.0
15.5
50
621-10405
NA8/10
12.0
17.0
25.5
60
621-10810
NA/01 PRONG
1.3
1.8
-
28
621-60001
NA1K/3 PRONG
2.5
5.0
-
28
621-60103
NA4/5 PRONG
7.5
10.0
-
50
621-60405
NA8/10 PRONG
12.0
17.0
-
60
621-60810
Date of issue: January 2014
All dimensions in mm. Subject to technical changes.
Further information and products at www.HellermannTyton.co.uk/a319
319
Application Tooling
6.2
Application Tooling for Non Shrinkable Tubing
Three-Pronged for sleeves and Grommets
• VA2,5/5 - Reinforced
Expansion tools are used to ensure speedy and precise application of
expandable markers and sleeves
Features and Benefits
• Suitable for expanding tubing cut lengths and rubber parts
• Withstands high loading
• Set of 3 2.5/5 pins
• Replacement pins available in sizes 8 and 18
VA2.5/5.
Replacement prong size 18
Three-prong pliers max.
application diameter
Replacement prong size 8
Replacement prong size 2.5/5
Bundle Ø
min.
Bundle
Ø max.
ØD
max.
Article-No.
VA2.5/5
2.5
5.0
26.0
621-00200
VA-2.5/5 PRONG
2.5
5.0
26.0
621-01200
VA2.5/5 PRONG 8
8.0
10.0
28.0
621-02200
VA2.5/5 PRONG 18
18.0
20.0
30.0
621-03200
TYPE
320
Further information and products at www.HellermannTyton.co.uk/a320
Date of issue: January 2014
All dimensions in mm. Subject to technical changes.
Application Tooling
6.2
Application Tooling for Non Shrinkable Tubing
Three-Pronged for sleeves and Grommets
• K, S, SS
Three-pronged expansion tools are used to ensure speedy and
precise application of expandable markers and sleeves.
Features and Benefits
• For speedy application of markers and sleeves
• Hellerine lubricant recommended for easy operation
• Handy D kit contains a tool body, a range of prongs and small
bottle of Hellerine lubricant.
Fast, secure application with the three-pronged expansion tools.
Three-prong pliers max.
application diameter
TYPE
Bundle Ø
min.
Bundle
Ø max.
ØD
max.
Max. length
of marker
Article-No.
D KIT
1.2
11.5
17.0
32
621-80005
K TOOL
5.0
10.0
17.0
32
621-80007
SS TOOL
1.2
2.0
15.0
20
621-80008
S TOOL
2.5
4.0
15.0
20
621-80009
Date of issue: January 2014
All dimensions in mm. Subject to technical changes.
Further information and products at www.HellermannTyton.co.uk/a321
321
Application Tooling
6.2
Application Tooling for Identification
Helafix Tool
• HCT1 for carrier size HCR09
• HCT2 for carrier size HCR12
HCT1 and HCT2 tools are ideal for cleanly cutting the carrier strip
as well as punching out the securing holes. For HCR7, HCR19 and
HCR25, the front part of the pliers can be used. To fix the character
holders HC and HCR simply use the T18 range of cable ties, fixings
or rivets.
Features and Benefits
• Cleanly cut Helafix HCR carrier tubing
• Punch securing holes on edges of HCR09 (HCT1) and HCR12
(HCT2)
• Apply punched HCR09 and HCR12 with T18 range of cable ties
• Suitable for punching rivet holes in HCR06, HCR18 and HCR24
tubing
• Punch hole diameter 2.5mm
• Fix with T18 range of cable ties, or suitable rivets
Any length can be used…
…just cut to suit.
TYPE
For Carrier
Width
For
Size
ØD
Article-No.
HCT1
10.0
HCR09
2.5
525-00010
HCT2
13.0
HCR12
2.5
525-00013
322
Further information and products at www.HellermannTyton.co.uk/a322
Date of issue: January 2014
All dimensions in mm. Subject to technical changes.
Minimum Order Quantity (MOQ) may differ from package content.
Date of issue: January 2014
Manual and pneumatic processing tools.
The professional way to fasten metal cable ties!
www.HellermannTyton.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement