Fiber Optical Components Lab and Production Equipment

Fiber Optical Components Lab and Production Equipment
Fiber Optical Components
Lab and Production Equipment
Optical Components

Pigtails, Patchcords, Adapters

Coupler/Splitters

Filter Based devices
PM Components

Polarization Scrambler Card

High Speed In-line Polarimeter

Reset-Free Polarization Tracker
Test & Measurement

Light Sources

Optical Powermeters

Timing/Delay Management
Serial Data Signal Testing
Bulletin No. 4013

Production and low Data Rate BERTS

BERTScope

Signal Analysis
www.laser2000.com
Overview & Contact Persons
Dear valued customers,
About Laser 2000
This brochure gives you a short overview about our product portfolio of fiber optic components, manufacturing,
production and lab test and measurement equipment.
Laser 2000 Fiberoptic has different branches of activity
where all of them are dedicated to fiber optics or photonics. In the fiberoptics field Laser 2000‘s offering comprises a large variety. Starting from optical patchcords,
attenuators and transceivers like GBICs and SFPs it ranges
to easy to deploy CWDM and DWDM solutions.
Starting from simple optical patchcords up to OEM subsystem solutions we offer a broad spectrum of fiber optic
devices and components as well as production equipment
for component and system manufactures, integrators, research labs and universities.
Our lab test and measurement equipment completes this
product line for measuring all optical parameters and
makes it possible to get deeper insight into electrical and
optical serial data signals.
Furthermore aggregation and optical transport for access,
metro and regional networks are a fix part of the portfolio.
With different quality partners Laser 2000 is able to provide the right solution for its customers. As Laser 2000 is
very knowledgeable in the optical domain they can even
tailor dedicated solutions for special needs.
Laser 2000 offers additionally test and measurement equipment for installers and operators of fiber optical networks.
Your Contact Persons
Michael Riess
Dr. Christina Manzke
Heiko Pierchalla
• Fiber Optics
• Digital Testing
• Fiber Optics
• Installation & Measurement
• Digital Testing
• Network Solutions
• Fiber Optics
• Digital Testing
Tel. +49 30 962778-11
Fax +49 30 962778-29
Mobile +49 151 55019719
[email protected]
Tel. +49 30 962778-13
Fax +49 30 962778-29
Mobile +49 151 55019721
[email protected]
Stefan Wiener
Christian Schöbel
Michael Oellers
• Installation & Measurement
• Fiber Optics
• Network Solutions
• Installation & Measurement
• Fiber Optics
• Network Solutions
• Installation & Measurement
• Fiber Optics
Tel. +43 1 4810498
Fax +43 1 4810548
[email protected]
Tel. +49 2161 307300
Fax +49 2161-307310
Mobile +49 151 55019720
[email protected]
Sabine Beausencourt
Andrea Wagner
Sandra Grothwinkel
• Fiber Optics
• Digital Testing
• Network Solutions
• Fiber Optics
• Installation & Measurement
• Network Solutions
• Installation & Measurement
• Fiber Optics
Product Specialist
Germany, PLZ 3-9
Tel. +49 8153 405-18
Fax +49 8153 405-33
Mobile +49 151 55019723
[email protected]
Product Specialist
Germany, PLZ 7-9
Tel. +49 9547 870369
Fax +49 9547 871281
Mobile +49 151 55019728
[email protected]
Sales Assistant
Tel. +49 8153 405-12
Fax +49 8153 405-33
[email protected]
Laser 2000 GmbH
Argelsrieder Feld 14
DE-82234 Wessling
München/Germany
Tel. +49 8153 405-0
Fax +49 8153 405-33
[email protected]
Office Berlin
Pasedagplatz 3-4
DE-13088 Berlin
Tel. +49 30 962778-0
Fax +49 30 962778-29
[email protected]
Office Bamberg
Hängbergstrasse 18
DE-96199 Zapfendorf
Tel. +49 9547 8703-69
Fax +49 9547 8712-81
[email protected]
Office Mönchengladbach
Ohlerkamp 4
DE-41069 Mönchengladbach
Tel. +49 2161 3073-00
Fax +49 2161 3073-10
[email protected]
2
Product Specialist
Germany, PLZ 0-2
Product Specialist
Austria, Eastern Europe
Sales Assistant
Fiber Optical Components – Lab and Production Equipment
Product Specialist
Germany, PLZ 3-6
Sales Assistant
Tel. +49 8153 405-30
Fax +49 8153 405-33
[email protected]
Office Wien
Christian Schöbel
AT-1160 Wien
Tel. +49 (0) 8153-405-12
Fax +49 (0) 8153-405-33
[email protected]
Product Specialist
Germany, PLZ 0-2
Tel. +49 2161 307320
Fax +49 2161 307310
[email protected]
!
New office
www.laser2000.com
Content
Overview & Contact Persons ................................................................. 2
Content ...................................................................................................3-4
Service-Center ....................................................................................... 38
Free Catalogue Order ............................................................................ 39
Optical Components
Optical Components
5-17
Specifications
Arrayed
Specifications
Arrayed
Specifications
Arrayed
Laboratory Test
and Measurement Equipment
18-30
Passive Components............................................................................... 5
• Pigtails, Patchcords, Adapters, Attenuators ................................... 5
• Coupler/Splitters Fused and PLC based .......................................... 5
• Pump and Power Combiners ............................................................ 5
• Isolators and Circulators ................................................................... 6
• Filter Based devices ........................................................................... 6
• Optical Switches ................................................................................ 6
• Others .................................................................................................. 7
• Dispersion compensating Modules (DCM) ..................................... 7
Active Devices – Time and Delay Management .................................. 7
• Manual Variable Optical Delay Line ................................................. 7
• Miniature Manual Variable Optical Delay Line ............................... 8
• Motorized Variable Optical Delay Line ............................................ 8
• Fiber Phase Shifter............................................................................. 8
• High-Speed Optical Path Length Scanner ...................................... 9
• Fixed Differential Group Delay ......................................................... 9
• Fiber Pigtailed Free Space Interferometer – MZI-001.................... 9
Polarization Management .................................................................... 10
• Dynamic Polarization Scrambler/Controller
– Mini Dynamic Polarization Controller ........................................ 10
• Polarization Switch .......................................................................... 10
• Miniature Polarization Scrambler Card ......................................... 11
• High Speed In-line Polarimeter ..................................................... 11
• Polarization State Generator ......................................................... 11
• Reset-Free Polarization Tracker – PolaStay™ ............................... 12
• Polarization Controller..................................................................... 12
Modulators ............................................................................................. 13
Accessories ............................................................................................ 13
• Lab Fiber Splicer ............................................................................. 13
Active Devices – Lightsources ............................................................. 14
• Electro-absorption Modulator Lasers ........................................... 14
• Continuous Wave C-band and L-band DFB Lasers (CW) ............. 14
• 2.5 Gb/s Direct Modulation Lasers (DML) ..................................... 14
• Other Digital Applications............................................................... 15
• Lasers for CATV and Analog Applications .................................... 15
• High & Ultra-High Power 980 nm Cooled Pumps ........................ 15
• High Power 980 nm Uncooled Pumps ........................................... 15
Detectors ................................................................................................ 16
• Pigtailed and Receptacle packed PIN Detectors
for analog and digital Applications ............................................... 16
Transceiver ............................................................................................. 16
• LAN .................................................................................................... 16
• WAN .................................................................................................. 16
PMD and PDL Calibration Standards .................................................. 17
Other Components ................................................................................ 17
Laboratory Test & Measurement Equipment
Light Sources ......................................................................................... 18
• Benchtop Broadband Source ......................................................... 18
• Superluminescent Diode Light Source ......................................... 18
• Fabry-Perot Laser............................................................................. 18
• Tunable Laser Source ...................................................................... 19
Modulation Units................................................................................... 19
Fiber Optical Components – Lab and Production Equipment
3
Optical Components
Laboratory Test & Measurement Equipment
Optical Powermeters ............................................................................ 19
• Optical Power Meter (cOPM-A1) ..................................................... 19
• Optical Return Loss Meter (cORL-A1) ............................................ 20
Optical Amplifiers ................................................................................. 20
• Benchtop Erbium-Doped Fiber Amplifier ..................................... 20
Fiberoptical Switches ........................................................................... 21
• Benchtop/Rackmount Programmable Switches .......................... 21
Polarization Measurement ................................................................... 21
• Polarization Extinction Ratio Meter ............................................... 21
• DSP In-line Polarimeter ................................................................... 21
• Polarization Measurement System ................................................ 22
• Polarization Synthesizer/Analyzer ................................................. 22
• DOP Meter ......................................................................................... 22
• PDL Multimeter ................................................................................ 23
Polarization Control .............................................................................. 23
• Multifunction Polarization Controller ............................................ 23
• Polarization Scrambler .................................................................... 23
• Reset-free Polarization Stabilizer ................................................... 24
• Polarization State Generator .......................................................... 24
• Polarization Synthesizer/Analyzer ................................................. 24
PMD Management ................................................................................. 25
• PMD Emulation Platform................................................................. 25
• Polarization Optimized PMD Source – PMDPRO™ ...................... 25
Timing/Delay Management ................................................................. 26
• Programmable Optical Delay Generator – TimeRITE™ .............. 26
• Fiber Stretcher .................................................................................. 26
Passive Component Test ...................................................................... 26
• Environmental Test System (OCETS Plus) .................................... 26
• Insertion Loss/ Return Loss Testing .............................................. 27
• Swept Wavelength Systems ........................................................... 28
High Resolution OTDRs ........................................................................ 28
Multiple Application Platform (MAP-200) .......................................... 30
Laboratory Test
and Measurement Equipment
18-30
Serial Data
Signal Testing
31-35
Serial Data Signal Testing
Production and Low Data Rate BERTS ............................................... 31
• 10G BERT: 8 Gbit/s to 11.3 Gbit/s X-BERT System ....................... 31
• BitAlyzer – 1.6 / 1.5 Gb/s Bit Error Ratio Test Systems ................ 31
BERTScope Product Family ................................................................. 32
• BERTScope Si 17.5 Gb/s Analyzer with Stressed Eye.................. 32
• BERTScope S 12.5/7.5 Gb/s Analyzers with Stressed Eye .......... 32
Signal Analysis ...................................................................................... 33
• Clock recovery you can count on ................................................... 33
• Jitter Spectrum and DCD Measurements ..................................... 33
• DCRJ — Optical Jitter Compliance Solution Showing
>80 MHz Jitter Spectrum................................................................. 34
• Flexible 850 nm Jitter Tolerance Testing ...................................... 35
• Companion Products ....................................................................... 35
Production Equipment
CW-5000 Coupler Workstation ............................................................ 36
Fusion Splicer for the Lab .................................................................... 36
Polishing Machines ............................................................................... 37
Additional Solutions ............................................................................. 37
4
Fiber Optical Components – Lab and Production Equipment
Production
Equipment
36-37
Optical Components
Passive Components
Pigtails, Patchcords, Adapters, Attenuators
In nearly all fiber optic networks the optical fiber, passive optical components and active optical devices must be joined
using optical interconnections. Our pigtails, patchcords and
adapters provide fundamental component support for these
applications as well as standard and custom value added integrated solutions that address the need for higher functionality and modularity.
Products
All major fiber types available
Multimode
Singlemode
Hard Cladded Silica and POF
Fan Outs
Colorcoded patchcords for CWDM applications
Fixed attenuators
Variable attenuators
Mode conditioning patchcords
Fiber Arrays
Coupler/Splitters Fused and PLC based
Fiber optic splitters are passive optical devices that are used
to split or combine different optical signals in terms of optical
power or wavelength. We offer fused biconical Taper and Planare waveguide based solutions (PLC).
Specifications
1x2, 1x3, 1x4, 1xN and many other configurations
Multimode, Sinlgemode solutions available
Bare fiber, buffered fiber or pigtail packaging
Rack and OEM solutions also available
Pump and Power Combiners
These couplers are used to combine the output power of two
or more pumps into one single fiber. They are usually used
for high gain EDFAs or fiber lasers. We offer a variety of 2x1,
3x1 to 7x1 power combiner and 3 port PM combiners.
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Fiber Optical Components – Lab and Production Equipment
5
Optical Components
Passive Components
Isolators and Circulators
Fiber optic isolators are passive optical components that are
used to isolate returned or back reflected optical signals, thereby preventing laser output degradation. They can be found
in virtually all fiber optic network systems, Erbium-Doped Fiber Amplifiers and WDM systems, where they protect critical
components from back reflections. Circulators are used to pass
optical signals only in one way through a 3 or 4 port device.
Specifications
High quality and attractively priced
Exceptional environmental stability
Low excess loss
Also for PM Fibers available
Filter Based devices
To increase carrying capacity of existing cable systems the
use of Wavelength Multiplexing technologies is common in
order to provide additional capacity without increasing fiber
count. Using Wavelength selective devices like two channel
Mux and Demux in Fused Biconical Taper technology up to
Thin Film Filter based or PLC we offer solutions for almost
any application.
Specifications
Wavelength division multiplexers (WDMs) for Multimode,
Single Mode and Polarization maintaining fiber (PMF)
CWDM – Components
DWDM – Components
Add/drop Multiplexer
Optical Switches
The optical switches are used to connect one input fiber to 1, 2
or N output fibers. Several packaging sizes and fiber counts are
available for Multimode, Singlemode and user supplied fibers.
Specifications
Remote fiber test systems
Fiber network restoration
Fiberoptic component test and measurement
Integrated module solution designed for integration
into new products
OEM applications
Sensing applications
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
6
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Optical Components
Passive Components
Others
Next Generation networks rely on additional re-configurable
optical links and nodes. For this application we offer several
integrated solutions and subsystems.
Please ask for details or provide your requirements!
Products
Arrayed Wave Guides AWGS with or without integrated VOAs
Reconfigurable Add Drop Filter (ROADM)
Hybrid components
Dispersion compensating Modules (DCM)
Modules are proposed for compensation in the C band, in the
L band, or the C+L band where applicable. Customized models are available upon request.
Active Devices – Time and Delay Management
Manual Variable Optical Delay Line
Our manually variable optical delay line provides precision
optical path variation of more than 18 cm (600 ps). The compact and rugged design makes the device ideal to be integrated in network equipment and test instrument for precision
optical path length or timing alignment.
Specifications
Space efficient
Highest delay to length ratio
Large delay: more than 600 ps
Low insertion loss variation
Free space model available
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]r2000.de
Fiber Optical Components – Lab and Production Equipment
7
Optical Components
Active Devices – Time and Delay Management
Miniature Manual Variable Optical Delay Line
The VDL-002 is a miniaturized variable optical delay line designed specifically for OEM applications. With a delay range
of up to 250 ps, this device is a superior replacement for the
variable RF phase shifters inadequately adapted from the RF/
wireless field for fiber optic communications. It is especially
useful in coherent detection systems for adjusting phase or
delay differences between signals.
Specifications
Compact size
High resolution
Low backlash
Low insertion loss
High stability
Longevity
Motorized Variable Optical Delay Line
General Photonics’ motorized variable optical delay line provides precision optical path length adjustment of up to 560
ps. Driven by a DC motor with an integrated encoder, the
MDL-002 has a delay resolution of less than 0.3µm (1 fs), and
an extremely low backlash of less than 8 fs. In addition, its
advanced motion design guarantees longevity for long-term
continuous operation.
Specifications
Compact size
High resolution
Low backlash
Low insertion loss
High stability
Long delay range
Fiber Phase Shifter
General Photonics‘ all fiber phase shifter/modulator provides
phase shifts up to 15 π from DC to 20 kHz. The all fiber construction practically eliminates insertion loss and back reflection. This compact device is ideal for fiber laser systems, fiber
resonators, and fiber interferometers for precision phase tuning or phase modulation.
Specifications
Compact size
Low insertion loss
Low residual amplitude modulation
Low PDL
Low cost
NoTail™ model available (without pigtails)
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
8
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Optical Components
Active Devices – Time and Delay Management
High-Speed Optical Path Length Scanner
The FST-002 is a PZT-driven high-speed optical path length
scanner with a scanning range of up to 18 mm at a resonant
frequency of around 2 kHz. Built with a patented fiber stretching technology, this device provides a large scan range
with a relatively low drive voltage of around 90 volts. At frequencies below resonance, a total scan range of 4.0 mm can
be achieved with a maximum drive voltage of 150 volts. This
fiber stretcher is packaged in a specially designed enclosure
to minimize audible noise generated by the PZT.
Specifications
Large delay range
High speed
Low insertion loss
Low loss variation
Low audible noise
Fixed Differential Group Delay
General Photonics’ fixed differential group delay lines eliminate the need for precise measurement of PM fiber lengths to
add defined amounts of first order PMD to a system. DGD values of up to 45 ps are available in the standard size package.
Larger DGD values are also available by special request.
Specifications
Large 1st order PMD up to 45 ps
Compact size
Low insertion loss
Fiber Pigtailed Free Space Interferometer
– MZI-001
The MZI-001 is a fiber pigtailed compact Mach-Zehnder interferometer, based on free space optics, for detecting changes
in optical frequency. The device comes with two fast photodetectors for the balanced detection of the two complementary outputs of the interferometer.
Specifications
Compact size
Accurate free spectral range
Temperature stable
Polarization insensitive
Fine optical frequency spacing
Balanced photodetectors
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Fiber Optical Components – Lab and Production Equipment
9
Optical Components
Polarization Management
Dynamic Polarization Scrambler/Controller
– Mini Dynamic Polarization Controller
The all-fiber dynamic polarization controller (patented) is specially designed for original equipment manufacturers (OEM)
for integration into their fiber optic network modules and test
equipment. The all fiber construction practically eliminates insertion loss and back reflection. The device can be used as a fast
electronic-driven polarization controller to convert any input polarization to any desired output polarization, or as a polarization
scrambler to randomize the output polarization state.
Specifications
No intrinsic insertion loss
No intrinsic back reflection
Works with any wavelength
Works with any single mode optical fiber
Compact, ideal for integration in modules
Fast response time
Polarization Switch
General Photonics’ all solid-state polarization switch can
quickly and repeatedly rotate the incoming SOP via a fixed
angle, either at 45 or 90 degrees. Both single mode and PM
fiber pigtailed versions are available. With the PM option, the
device functions as a TE to TM converter to switch the SOP
between being aligned with the slow and the fast axes of the
PM fiber, or between the slow axis and 45 degrees from the
slow axis. With SM option, the device simply rotates the polarization eclipse either 45 or 90 degrees. The device can be
used for PMD monitoring, polarization modulation, polarization detection, and polarization metrology.
Specifications
Fast speed
No moving parts
Low insertion loss
Compact size
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
10 Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Optical Components
Polarization Management
Miniature Polarization Scrambler Card
General Photonics’ miniature polarization scrambler module
is designed specifically for hand held and field instruments.
It uses fiber squeezer technology to effectively randomize polarization states. Finally, the scrambler has a superb scrambling uniformity enabled by an on board microprocessor and
proprietary codes.
Specifications
No insertion loss & No back reflection
Low residual phase and amplitude modulation
Selectable scrambling frequencies
Low power consumption
High Speed In-line Polarimeter
General Photonics’ in-line polarimeter is specially designed
for low cost, high-speed polarization characterization without
interrupting data traffic. It outputs four voltage signals for calculating both the degree of polarization (DOP) and the state
of polarization (SOP) of the light passing through the device
in microseconds. PolaDetect is ideal for integration into polarization monitoring and polarization stabilization modules, or
into polarization characterization instruments.
Specifications
High speed
Low loss
Compact size
No moving parts
Polarization State Generator
General Photonics’ high-speed polarization state generator
(PSG) module provides the ability to generate 6 states of polarization (-45°, 0°, 45°, 90°, RHC & LHC) across the Poincaré
Sphere in less than 250 µs, with an impressive repeatability
of less than 0.1 degrees. In addition, it comes as a compact
module ideal for integration into systems that require precise
generation of these 6 polarization states or precise 90° polarization rotation.
Specifications
Digitally switched SOP
Switching speed 250µs or less
Degree SOP repeatability
6-bit TTL control
Compact
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Fiber Optical Components – Lab and Production Equipment
11
Optical Components
Polarization Management
Reset-Free Polarization Tracker – PolaStay™
The PolaStay™ polarization tracker automatically adjusts the
state of polarization (SOP) towards a reference SOP, counteracting continuous input SOP variations as fast as 1 ms with
no resets. The reference SOP is determined by a feedback
signal which can be provided either internally or externally.
The internal feedback version (POS-002-I) consists of a fiber
squeezer polarization controller, in-line polarization monitor,
digital and analog circuits, and proprietary algorithm.
The error signal from the polarization monitor is fed back to
the polarization controller to maintain a linear SOP at the output. The external feedback version (POS-002-E) replaces the
internal polarization monitor with an external analog electrical feedback signal of the user’s choice, such as a voltage
proportional to the degree of polarization (DOP) measured by
a polarimeter, the bit-error rate (BER) from a BER chip, the RF
spectrum of a detected signal, or the optical power after a
polarizer. The output fiber can be either single mode fiber or
PM fiber with the SOP aligned to its slow axis.
Specifications
Reset free operation
1 ms recovery time
32 π /s tracking speed
Plug and play
Polarization Controller
The polarization controllers are available in different variations either pigtailed or to drop in a bare or buffered fiber as
well as noTail version. The pigtailed versions can be spliced
to other components with a minimum loss and are ideal for
controlling the polarization state of light in any single mode
fiber optic systems. The compact, user-friendly device covers
wide operation wavelength range.
The in-line version can be inserted into a fiber optic system
to control the polarization state of light without having to
disconnect any part of the system. It can be used by simply
inserting a length of fiber into the slot located on top of the
device. The miniature version can be inserted in even tighter
spaces in a fiber optical module.
Specifications
Low Loss
Low back reflection
Easy to connect
Low cost
Insensitive to wavelength variations
Works with fibers of any size
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
12 Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Optical Components
Modulators
We provide a variety of modulation solutions for high data
rate optical networks, high bandwidth optical applications, fiber sensors and instruments. The complete family of LiNb03
modulators, RF drivers and subsystems allow system manufacturers to increase their competitiveness by offering costeffective and high performance modulation solutions.
Specifications
2,5 G Lithium-Niobate Modulators
10 G Modulators
QPSK –Modulators
Bias Driver
Modulator boxes
Accessories
Lab Fiber Splicer
The LFS is a precision jig that constrains two bare fibers in an
end-to-end position forming a temporary joint. The fibers are
not permanently glued or fused.
Specifications
Fast
Easy to use
Accommodates different fiber types
Low splice loss
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Fiber Optical Components – Lab and Production Equipment
13
Optical Components
Active Devices – Lightsources
Our portfolio covers many types of discrete lasers for analog
and digital transmission in datacom and telecom applications.
Applications
CW
Digital
Analog
Tunable
Electro-absorption Modulator Lasers
The modules contain a DFB laser with monolithically integrated electro-absorption modulator (EML). The modulation
voltage is applied to the modulator section while the DFB laser operates CW. Without the complexity of LiNbO3 external
modulators, Electro-absorption Modulator Laser Module is
dedicated to STM16/OC-48 and STM64/OC-192 bit rate with
reduced size and reduced cost.
Solutions
2,5 Gb/s C-Band DWDM
10 Gb/s C-Band DWDM
Butterfly and XMD Packages
Continuous Wave C-band and L-band DFB
Lasers (CW)
This laser module contains a SLMQW DFB laser and can be
used for high power Wavelength Division Multiplexed (WDM)
telecommunication, CATV and military systems, as well as
sensing applications with external modulation. The module
incorporates a polarization maintaining fiber pigtail, thermoelectric cooler, precision thermistor, and optical isolator for
stable operation under all conditions.
Solutions
C+L-Band Version
10, 20 and 30 mW
2.5 Gb/s Direct Modulation Lasers (DML)
This laser module contains a DFB laser with 25 Ohm impedance matching designed for use in Wavelength Division
Multiplexed (WDM) systems, high power direct modulation
operations up to 2.7Gbit/s supporting application up to 200
km. The module incorporates a thermoelectric cooler, precision thermistor and optical isolator for stable operation under all conditions.
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]00.de
14 Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Optical Components
Active Devices – Lightsources
Other Digital Applications
Coaxial and Butterfly Laser for CWDM 1470 nm to 1610 nm,
1525 nm 1310 nm and C-Band DWDM.
Features
Downstream/Upstream rates up to 2.5 Gbps
Wide operating temperature range
RoHS compliant package
Fully GR-468 Telcordia compliant
Lasers for CATV and Analog Applications
We offer a variety of lasers for CATV and other analog applications, like Quadrature Amplitude Modulation (QAM)-Lasers, Forward and Return Path Lasers and Lasers optimized
for Wireless Repeater applications.
Features
Excellent linearity
Designed for RF modulation to 1000 MHz
RoHS compliant package
Fully GR-468 Telcordia compliant
High & Ultra-High Power 980 nm Pumps
– 14-pin Cooled Butterfly Modules
Features
Up to 750 mW kink-free output power
Low power consumption
Hermetically sealed low profile BTF package
High Power 980 nm Uncooled Pumps
– Uncooled Mini-DIL Modules
Features
Up to 275 mW kink-free output power
Coolerless device
Operating temperature range -5°C to +75°C
Mini-DIL package
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Fiber Optical Components – Lab and Production Equipment
15
Optical Components
Detectors
Pigtailed and Receptacle packed PIN Detectors for analog and digital Applications
Applications
Analog
Digital
Video Receiver Modules
Transceiver
Transceiver are standardized transmission modules. They
convert electrical signals into optical signals and vice versa.
Transceivers may be used in established routers and switches for the LAN, SAN and WAN area.
We offer transceiver solutions for various applications.
LAN
For the LAN area we offer original and OEM transceiver (GBIC,
SFP) for Cisco, HP, Extreme, Nortel, Foundry, Avaya, IBM, Enterasys and similar systems.
WAN
Besides those for Gigabit Ethernet, STM-1, STM-4, STM-16
and STM-64 also transceivers for CWDM and DWDM are
available. This increases the transmission bandwidth and the
flexibility to set up metro transmissions.
Specifications
Data rates up to 2.7 Gbit/s with SFP resp.
10 Gbit/s with SFP+, XFP, XENPAK, X2
16 channels for CWDM
32 channels for DWDM
Up to 120 km without optical amplification, above 200 km
with optical amplification
PON/FFTH Transceivers
BIDIs coax, 1x9, SFF, SFPS
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
16 Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Optical Components
PMD and PDL Calibration Standards
PMD and PDL are important considerations in many applications, especially high data-rate communications. With the
development of high precision test equipment and tightertolerance systems, a need has arisen for extremely precise
calibration standards. General Photonics offers a range of
calibration standards for DGD, second order PMD and PDL.
The accuracy of the standards is assured by the intrinsic optical and birefringence properties of the materials used in their
construction
Specifications
Compact size
Accurate and precise
Available
Other Components
For dedicated applications we offer a variety of additional
components like:
Solutions
Tunable Filters
SOAs
SLEDs
Fiber-Bragg-Gratings
Erbium doped Fiber Amplifiers (EDFA)
Gain Blocks
Ruggedized Solutions
Integrated Components
and more
Please ask for more details!
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Fiber Optical Components – Lab and Production Equipment
17
Laboratory Test & Measurement Equipment
Light Sources
Benchtop Broadband Source
The JDSU Benchtop BBS series provides a wide wavelength
range and high output power source within the 1525 to 1610
nm window. Its superior performance is achieved by pumping erbium-doped fiber to generate amplified spontaneous
emission combined with specialized optical filters to achieve
optimal flatness over its operating wavelength range.
Specifications
Choice of wavelengths (C- band and L- band)
Flattened output power spectrums
High output power density
High spectral stability
Optional quad outputs
Superluminescent Diode Light Source
The SLD-101S is a highly stable superluminescent light source designed specifically for OCT, sensor and test & measurement applications. During operation, both the current and
temperature are accurately controlled for superb power and
spectral stabilities.
Specifications
Extremely power stable
Extremely temperature stable
Internal and external modulation options
Wide center wavelength selections
Wide spectral width selections
Low and high DOP options
High ER options
Fabry-Perot Laser
The JDS-A1 provides a compact, intuitive laser source designed to enable applications ranging from simple continuity
verification and insertion loss testing to integration into process automation equipment designed for robotic alignment.
Specifications
Provides four keys FTTx wavelengths (1310, 1490, 1550 and
1625 nm)
Combines two or three lasers onto a single output
Adjustable output power
Selectable continuous wave or modulated output power
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
18 Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Laboratory Test & Measurement Equipment
Light Sources
Tunable Laser Source
The TLS-101 is a compact tunable laser source for daily test
and measurement applications. The laser can be step-tuned
across the C-band communication channels with a tuning resolution of 50 GHz in less than 20 ms. The internal wavelength
locker assures that the wavelengths or frequencies of the output light are exactly on the ITU grid of the DWDM channels.
Specifications
Fast tuning speed (20 ms)
High output power (20 mW)
ITU grid locking
Ethernet interface for remote control
GPIB, USB, and RS-232 interfaces for flexibility
Modulation Units
The ModBox systems are a family of turnkey optical transmitters and external modulation benchtop units for both digital
and analog transmission applications. The Modbox design integrates within an enclosure a laser source (optional), a complete modulation stage featuring an external LiNb03 modulator with its RF driver and bias control circuit, and a receiver
stage (optional). ModBoxes can be tailored to specific transmission needs in order to provide systems engineers with reliable performance and high speed modulation capabilities together with the peace of mind of a ready-to-plug equipment.
Specifications
12.5 Gb/s NRZ ModBox
40 Gb/s NRZ ModBox
40 Gb/s QPSK ModBox
Pulse generation ModBox
Spectral broadening ModBox
Optical Powermeters
Optical Power Meter (cOPM-A1)
The cOPM-A1 Optical Power Meter is optimized for a number of
applications ranging from general lab use to test and process
automation for passive optical components. It can be used
with both single-mode and multimode fiber and offers power
levels from –80 to +15 dBm over a wavelength range of 800 to
1650 nm. The cOPM-A1 features high accuracy, high linearity,
and extremely low polarization-dependent sensitivity.
Specifications
Operates over wide wavelength range (800 to 1650 nm)
High power capability option can withstand up to 2 W
Low PDL <0.01 dB
Bare fiber measurement capability
SCPI-compliant commands over USB automation interface
Auto dark current measurements
Perform simultaneous measurements on multiple wavelengths when used with cORL and cFPL units
Fiber Optical Components – Lab and Production Equipment
19
Laboratory Test & Measurement Equipment
Optical Powermeters
Optical Return Loss Meter (cORL-A1)
The cOTRL-A1 provides a compact, intuitive Optical Return
Loss Meter designed to enable applications ranging from
simple continuity verification and return loss testing to integration into process automation equipment designed for
robotic alignment.
Specifications
Provides versatility with optical power, return loss,
and light source in single unit
Operates at 4 key FTTx wavelengths
(1310, 1490, 1550, and 1625 nm)
Combines 2 or 3 laser versions on a single output
Dynamic range of 65 dB for return loss measurements
applications
Serves as a general purpose lab tool
Performs return loss testing of FTTx and passive
optical components
Performs return loss testing of optical connectors and cables
Monitors back reflection during alignment process
Optical Amplifiers
Benchtop Erbium-Doped Fiber Amplifier
The Benchtop Erbium-Doped Fiber Amplifier (EDFA) amplifies
optical signals across the EDFA window (1528 to 1610 nm).
Through optimization of amplifier gain, noise figure, and saturated output power, the EDFA will expand your test capabilities
in systems, components or sub-assembly manufacturing as
well as research and development (R&D) environments.
Specifications
Choice of wavelengths C- or L- bands
High output power and gain
Mid-span access
Compact benchtop design with rackmount kit
Single channel and multichannel dense wavelength division
multiplexing (DWDM) capabilities
RS-232 remote control
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
20 Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Laboratory Test & Measurement Equipment
Fiberoptical Switches
Benchtop/Rackmount Programmable Switches
The Benchtop/Rackmount Programmable Switches can be
controlled using the front panel keys with a numeric pad or
via GPIB or serial RS-232 interface. The SCG series ganged
input switches allow a single switch instrument to replace
multiple switch elements while maintaining low loss. In this
series of switches, the inputs are ganged together in a particular sequence and are thus able to offer three different
modes of operation.
Both single-mode (SM) and multimode (MM) switches are
available. We offer also large matrix switches for integration
into optical networks or measurement applications with up to
256x256 ports based on the MEMS technology.
Polarization Measurement
Polarization Extinction Ratio Meter
The ERM-101 is a high performance polarization extinction ratio (PER) meter designed specifically for both production and
laboratory environments. With a PER dynamic range greater
than 50 dB, a wide wavelength range (1260-1650 nm) and an
angular resolution of 0.06°, the instrument outperforms any
competitors in its class.
Specifications
High PER dynamic range
Wide wavelength range
High angular resolution
Detachable optical head option
Variable speed measurement
Data storage and recall functions
Manual alignment function
DSP In-line Polarimeter
The POD-101D is a DSP (digital signal processor) powered inline polarimeter specially designed for high-speed polarization analysis and monitoring. The instrument uses four channels to simultaneously obtain the four Stokes parameters and
measure the instantaneous state of polarization (SOP) and
degree of polarization (DOP) of an input light beam.
Specifications
Up to 625 kS/s polarization sampling rate
Analog bandwidth up to 1MHz
Real time Poincaré Sphere display
Continuous scan mode
External trigger mode
Long term monitoring mode
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Fiber Optical Components – Lab and Production Equipment
21
Laboratory Test & Measurement Equipment
Polarization Measurement
Polarization Measurement System
PolaWise™ is an advanced polarization measurement system
for accurate measurement of all polarization related properties
of light sources and optical materials. Based on General Photonics’ patented magneto-optic polarization generation and analysis technology, the PSGA-101-A is specially designed for fiber optic applications and can effortlessly accomplish multiple
functions, including polarization state generation (PSG), polarization state analysis (PSA), polarization extinction ratio (PER)
measurement, polarization dependent loss (PDL) measurement and polarization mode dispersion (PMD) measurement.
Specifications
Multiple operation modes
Flip-top graphic display
Front panel character LCD display
External LCD monitor enabled
USB removable data storage
Ethernet for remote operation
Polarization Synthesizer/Analyzer PSY-101
PolaFlex™ is a turn-key instrument that can generate and
maintain any desired state of polarization (SOP), regardless
of the input SOP. The instrument automatically searches for
the SOP and maintains it against input SOP fluctuations.
Specifications
Multiple operation modes
Deterministic SOP generation
Deterministic SOP trace generation
Polarization analysis
Polarization scrambling
Input polarization independent
DOP Meter
Using a patented maximum & minimum search technique,
this DOP meter can measure and display the Degree of Polarization (DOP) of a light source in real time with high accuracy
and wide dynamic range. While polarimeter-based systems
are expensive and can be inaccurate for low DOP sources
and polarization scrambler-based instruments are less accurate for high DOP sources, this amazing, low-cost DOP meter
provides simple, accurate measurement of both low and high
DOP sources.
Specifications
Rapid Measurement
No Calibration Needed
High Accuracy and Reliability
Front Panel Real-Time Display
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
22 Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Laboratory Test & Measurement Equipment
Polarization Measurement
PDL Multimeter
Using a patented deterministic power search method (compliant with TIA/EIA-455-198), General Photonics‘ PDL multimeter
measures the Polarization Dependent Loss (PDL), Insertion
Loss (IL) and optical power of a device under test (DUT) in subseconds. Unlike PDL meters that use a polarization-scrambled
input to the DUT and look for the PDL via output power fluctuations, PolaCHEX™ systematically searches for the maximum
& minimum transmission, assuring measurement accuracy at
all times. Consequently, this instrument is the most accurate
PDL meter available on the market, able to accurately characterize devices with both low and high PDL values.
Specifications
Deterministic polarization scanning
Rapid measurement
No calibration needed
High accuracy and reliability
RS-232, USB, Ethernet, GPIB interfaces
Polarization Control
Multifunction Polarization Controller
Controlling polarization state has never been easier: This instrument has 4 operational modes for complete polarization
control: variable speed polarization scrambling, manual polarization adjustment, polarization function generation and externally triggered scrambling.
Specifications
4 Polarization Control Modes
Easy to Use
Flexible Setting Options
Speed up to 6 kHz
Complete Polarization Control
Polarization Scrambler PCD-104
General Photonics’ Polarization Scrambler uses a breakthrough all-fiber technology to effectively randomize polarization states. Depolarizing by polarization scrambling has
many important applications. Scrambling the input polarization can eliminate measurement uncertainties caused by the
polarization sensitivity of the testing device. Performance degradation due to polarization dependent gain (PDG) induced
in optical amplifiers can also be suppressed by polarization
scrambling. In addition, polarization scrambling can be used
in systems to facilitate and simplify PMD monitoring.
Specifications
4 Polarization Control Modes
Easy to Use
Flexible Setting Options
Speed up to 6 kHz
Complete Polarization Control
Fiber Optical Components – Lab and Production Equipment
23
Laboratory Test & Measurement Equipment
Polarization Control
Reset-free Polarization Stabilizer
The PolaStay™ polarization stabilizer actively maintains a
stable output state of polarization (SOP) against rapid input
SOP fluctuations as fast as 2 ms and tracks against an endlessly rotating input SOP up to 16 π/s without reset. In addition to the standard configuration, specialized versions are
available for low power applications (down to -30 dBm) and
special wavelengths (1064 nm).
Specifications
Reset free operation
2 ms recovery time
16 π/s tracking speed
Plug and play
Polarization State Generator
The ability to repeatedly generate 5 to 6 distinctive polarization states on the Poincaré Sphere is highly desirable for
polarization-related analysis. General Photonics’ high-speed
polarization state generator (PSG) is the first such product on
the market. It generates, with high repeatability, 6 states of
polarization (-45°, 0°, 45°, 90°, RHC & LHC) across the Poincaré
Sphere in less than 250 µs.
Specifications
Digitally Switched SOP
Switching Speed 250 µs or less
Degree SOP Repeatability
6-bit TTL Control
Polarization Synthesizer/Analyzer PSY-101
PolaFlex™ is a turn-key instrument that can generate and
maintain any desired state of polarization (SOP), regardless
of the input SOP. The instrument can also function as a polarization scrambler, generating random SOP scans with userdefined scanning speed.
Specifications
Deterministic SOP generation
Deterministic SOP trace generation
Polarization analysis
Polarization scrambling
Input polarization independent
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
24 Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Laboratory Test & Measurement Equipment
PMD Management
PMD Emulation Platform
This PMD emulation platform (PMDE) simulates the true nature of PMD. Using General Photonics‘ patented polarization
controllers and differential group delay lines, the PMDE-301
generates an accurate Maxwellian Probability Density Function with a tunable mean DGD value. The dynamic PMD emulation platform has broad applications in PMD effects evaluation and in calibration of PMD testing setups. In addition, it can
be used in performance evaluation of PMD compensators.
Specifications
Multiple functions
Rapid measurement
All-order PMD emulation
High accuracy and reliability
Tunable statistics
Reconfigurable
Random or slow PMD dynamics
Polarization Optimized PMD Source
– PMDPRO™
PMDPro™ is a breakthrough PMD source that can deterministically generate precise 1st order PMD up to 180 ps and 2nd
order PMD up to 8100 ps2. It contains an automatic polarization controller and two polarimeters that monitor the state
of polarization (SOP) and degree of polarization (DOP) before
and after the PMD generating elements. The polarization controller can be used with the front polarimeter to automatically
align and maintain the input SOP at 45° from the principal
axis of the DGD element to obtain the worst-case first order
PMD effect.
Alternatively, the controller can automatically adjust and
maintain the input SOP using the feedback from the rear polarimeter to either minimize or maximize the output DOP for
each PMD setting. Minimizing the output DOP enables testing
of the worst-case total PMD effect, while maximizing the DOP
turns the PMDPro™ into a PMD compensator, allowing the
user to estimate the PMD values of an active fiber link and
compare its performance with and without PMD compensation. PMDPro™ can also perform PMD emulation by generating statistical PMD distributions. Finally, the polarization
controller and polarimeters enable variable rate polarization
scrambling and deterministic polarization control functions,
including trace generation and polarization stabilization at
any SOP. PMDPro™ makes your PMD related systems testing
simple, fast and professional.
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
Specifications
1st & 2nd order PMD source
1st order PMD emulator
Automatic polarization alignment
Polarization scrambling
PMD compensation
PMD determination for live fiber links
Rapid PMD switching: ~ 1 ms
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Fiber Optical Components – Lab and Production Equipment
25
Laboratory Test & Measurement Equipment
Timing/Delay Management
Programmable Optical Delay Generator
– TimeRITE™
Generating programmable optical delay generator from nanoseconds to milliseconds is important for various applications
ranging from wireless communications to radar, optical communications and measurement systems. General Photonics’
TimeRITE™ programmable optical delay generator is the first
such product on the market. With a total delay range up to
0.25 ms (75 km) and a delay resolution up to 12 bits, this easyto-use instrument features low insertion loss (~0.5 dB per bit),
low delay dependent loss (DDL<0.2 dB), low polarization dependent loss and fast delay changing speed (<0.5 ms).
Specifications
High resolution
Large delay range
Low insertion loss
Fast delay switching
Low delay dependent loss
Fiber Stretcher
The FST-001-B is a piezo-driven fiber stretcher with a long optical delay range of up to 3 mm. The device comes complete with
a piezo driver packaged in a user-friendly small enclosure.
Specifications
Large delay range
High speed
Low insertion loss
Analog & digital control
User friendly
Passive Component Test
Environmental Test System (OCETS Plus)
OCETS Plus is the evolution of the classic OCETS system that
has been shipping from JDSU for over a decade. The classic OCETS hardware specifications and software algorithms
have been improved to meet the latest market requirements
for optical component qualification testing, such as those driven by Verizon’s FOC program.
Specifications
High insertion loss (IL) and return loss (RL) repeatability
High return loss option (HiRL) monitors RL up to 70dB
Supplied with EasyOCETS Software
Single mode and multi-mode systems
Full bi-directional testing
Up to 210 device channels (420 ports)
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
26 Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Laboratory Test & Measurement Equipment
Passive Component Test
Insertion Loss/ Return Loss Testing
OTS-OPM 815
Measure Insertion Loss efficiently for single or dual wavelength requirements. With the OP815 series the Insertion loss
(IL) on fiber optical components are measured fast and accurately. The insertion loss is measured by utilizing the stable laser
source in combination with the precision optical power meter.
Specifications
Insertion Loss (IL) on single mode fibers & cables
Fully automated, concurrent dual wavelength IL and RL
Display readings for dual wavelength
Approved to qualify all singlemode cables
USB Interface to custom applications or OPL_ Pro, the comprehensive cable testing system
Various detector options, with interfaces to multi fiber and
multi-ferrule connectors
Singlemode, Multimode and POF solutions available
OTS-OPM 930
The OP930 series are the most efficient Insertion Loss and
Return Loss measurement currently on the market. With the
OP930-SM series the Insertion loss (IL) and return loss (RL) on
fiber optical components are measured fast and accurately.
The return loss is measured with the „no mandrel“ method,
meaning neither matching gel nor mandrel wraps are required
at the far end of the cable. The insertion loss is measured by
utilizing the stable laser source of the returnloss in combination with the precision optical power meter. Measuring Insertion
Loss (IL) and Return Loss (RL) on multiple fibers can be challenging; the connectors may be difficult to clean, high quality
reference cables may be hard to get and the measurement step
requires fiber management and organizational skills beyond
belief. With the OPSeries Multifiber Test Systems, tailored solutions measure the necessary parameters on Mulitfiber cables
such as MTP/MPO Cables, Fanouts, Multi-termini Connectors,
and even Duplex or Simplex Cables. Compact instrumentation
combined with the efficient OPLMax application software, the
test setup and measurement data stay well-organized.
MTP/M PO/MT
Te s te r
Specifications
Insertion Loss (IL) and Return Loss (RL) measurement
on single mode fibers & cables
Fully automated, concurrent up to 4 wavelengths IL and RL
Displays both readings, IL and RL, at the same time
Mandrel free RL measurement, IEC/TIA approved RECM
method
Approved to qualify all singlemode cables
USB Interface to custom applications or OPL_Pro,
the comprehensive cable testing system
Various detector options, with interfaces to multifiber
and multi-ferrule connectors
Singlemode and Multimode versions available
Multifiber solution with integrated switches,
e.g for ribbon fibers
MPO/MT Multifiber Testing (accessories also available)
Fiber Optical Components – Lab and Production Equipment
27
Laboratory Test & Measurement Equipment
Passive Component Test
Swept Wavelength Systems
(SWS2000 and OMNI Expansion Series)
The Swept Wavelength System SWS2000 series remains the
industry standard solution for measuring insertion loss (IL),
polarization dependent loss (PDL), return loss (RL) and directivity with high wavelength resolution in both research and
development (R&D) and production environments. With the
OMNI Expansion group delay (GD) and differential group delay can be added making SWS the ideal system for the complete verification of components for 40G systems.
Specifications
Scalable architecture - add more stations any time
± 0.002 nm absolute wavelength accuracy
Up to 128 detector channels available per station
Remote source laser can be shared by up to 8 workstations
High speed scanning (user controllable) up to 40 nm/s
Flexible easy-to-use software
Customized applications through dynamic link libraries (DLLs)
24/7 service and support
High Resolution OTDRs
Optical Fiber Monitors are designed to measure fiber optical
components such as fiber cable and patch cords as well as passive components such as isolators, switches attenuators, etc.
OFM1020
The OFM1020 has been designed specifically to characterize and fault find the short runs encountered in aircraft optical harnesses. While not limited to aircraft harnesses, the
harnesses can be mapped into the OFM1020 memory and
subsequently tested at any time. A harness consists of a series of links, each link with a series of features. The OFM1020
finds the features automatically in the selected link and maps
each feature position and its returned signal strength. To
eliminate small features and multiple reflections, the operator can select a threshold signal strength below which the
OFM1020 will not record the feature. Subsequent testing of
specified links can reveal the precise location of damaged
components or fiber.
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
Specifications
Operates in Real-Time
Has a Map & Test routine
Link Map time is about 20 seconds
Link Test time is about 5 seconds
Has Flash Memory
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
28 Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Laboratory Test & Measurement Equipment
High Resolution OTDRs
OFM130
The OFM130 is a unique, fixed wavelength, high resolution
OTDR designed to operate in the long wavelength region
(1200 nm to 1635 nm) in Real-Time with unprecedented sensitivity and resolution. When operated in the Fresnel mode,
return loss as low as 80 dB can be measured from individual
concatenated components, separated by as little as 50 cm.
Rayleigh-mode operation allows for splice-loss measurements (even between unlike fibers) in confined lengths such
as experienced in erbium amplifiers. The OFM130 Real-Time
operational capability makes it unmatched for fault-finding
applications. The high resolution also makes the OFM130 suitable for beat-length measurements in PM fiber in addition to
more normal length and delay-line applications.
Specifications
Self-contained portable instrument
Operates in Real-Time
Can be remotely controlled through the GPIB interface
Programmable
Many custom configurations and options
OFM20
The OFM20 is a unique, fixed wavelength, high resolution
OTDR designed to operate in the short wavelength region
(630 nm to 980 nm) in Real-Time with unprecedented sensitivity and resolution. The system can be configured to operate
in plastic optical fiber (POF) or the standard glass fiber. When
operated in the Fresnel mode, return signals below 100 dB
can be detected and return losses as low as 55 dB in multimode fiber can be measured from concatenated components, separated by as little as 10 cm. Rayleigh-mode operation
allows for splice loss and bending loss measurements. The
OFM20 Real-Time operation makes it unmatched for fault-finding applications. The high resolution also makes the OFM20
suitable for beat-length measurements in PM fiber in addition to the more normal length and delay-line applications.
Specifications
Self-contained portable instrument
Operates in Real-Time
Can be remotely controlled through the GPIB interface
Programmable
Many custom configurations and options
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Fiber Optical Components – Lab and Production Equipment
29
Laboratory Test & Measurement Equipment
Multiple Application Platform (MAP-200)
The JDSU Multiple Application Platform (MAP-200) is an optical test and measurement platform optimized for cost-effective development and manufacturing of optical transmission
network elements. Todays rapidly changing optical market
requires investment in productivity-enhancing technologies
and tools, making the MAP-200 scalable test platform the
right tool needed in even the most stringent environments.
Based on the previous-generation Multiple Application Platform (MAP), the MAP-200 builds on the differentiation of offering the broadest portfolio of modules in the densest and
most configurable platform. The MAP-200 is optimized for test
applications in lab and manufacturing environments ranging
from insertion loss testing to dispersion penalty testing.
MAP Power Meters
MAP Tunable Filters
MAP Power Meters provide high absolute power measurement accuracy over a wide power and wavelength range.
They support a broad combination of fiber types and connectivity options optimized for datacom and telecom applications.
MAP Tunable Filters provide the lowest loss and narrowest
bandwidth filter with the highest input power capability in
the industry.
MAP Switches
MAP Amplifiers are designed to meet the broadest optical signal amplification applications. They are available at various
saturated output power, gain flattened or not gain flattened,
C-band, L-band and with low noise figure.
MAP Switches are the most configurable optical signal routing solutions in their class. MAP Switches are available in
configurations including low channel count matrix (2x2) and
single input to multiple outputs ranging from 2 to 50. In the
1x2 and 2x2 format, the modules are available with up to
eight switches per single slot module.
MAP Attenuators
MAP Sources
MAP Attenuators provide the highest performance optical
power control solution. The attenuators offer the lowest insertion loss, highest input power capability, low polarization
dependent loss (PDL), high dynamic range and ultra-flat attenuation over wavelength. Monitor couplers are optional
available.
MAP Sources are ideal sources for applications requiring
a stable stimulus for parametric measurements. The sources are available at key telecom wavelengths, with broad or
narrow spectral bandwidth or with tunable spectrum. Other
functions available in the MAP-200 include a variable backreflector, polarization controller, RF switch and utility modules.
MAP Amplifiers
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
30 Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Serial Data Signal Testing
Production and Low Data Rate BERTS
10G BERT: 8 Gbit/s to 11.3 Gbit/s X-BERT System
The X-BERT is a quick way to increase throughput of 10Gbps
fiberoptical or electrical component production and to reduce the total cost of ownership. Our 10Gb/s BERT provides
essential testing features at the lowest investment possible.
Easy to set up and small in size.
The 10G X-BERT is a high speed, low cost modular BERT
equipment, giving the option to configure the device according to customers needs and allow for later upgrade without
wasting previous investments.
Available modules include electrical and optical BERTs, Clock
Sources, CDR, Clock Divider and more. Also customized modules have been delivered. All modules work independently.
For production throughput increase up to three 10G BERTs in
a 19“/2 or up to 7 BERTs in a 19“ housing can be operated.
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
BitAlyzer – 1.6/1.5 Gb/s Bit Error Ratio Test
Systems
These instruments are the world‘s first bit error rate test system combined with an eye pattern display and automatic jitter measurements, all in one chassis. The BitAlyzer‘s rapid
eye mask test is another feature that adds to the efficiency
of this cost-effective unit. This ultimate physical layer test
system comes standard with our patented BitAlyzer® Error
Analysis™, which provides detailed analysis of data stream
errors. Another benefit to this multi-function system is the
flexibility of the unit, including differential and single-ended
I/O that supports variable amplitude, offset and threshold.
Ideal for the following applications
Production Eye Masks, Jitter and BER Tests
Semiconductor Characterization
Transceiver Testing
Satellite Communications
1 Mb – 1.6 Gb/s (BA1600) Rate
Eye Pattern Display
Differential and Single-Ended I/O
Variable Amplitudes, Offset and Threshold
BitAlyzer® Error Location Analysis
Automatic RJ & DJ Jitter Measurements
BER Bathtubs with Q-factor Measurements
Very Fast Eye Mask Tests
Pattern Generation
Bit Error Detection
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Fiber Optical Components – Lab and Production Equipment
31
Serial Data Signal Testing
BERTScope Product Family
BERTScope Si 17.5 Gb/s Analyzer with
Stressed Eye
BERTScope S 12.5/7.5 Gb/s Analyzers with
Stressed Eye
The BERTScope Si 17500C Signal Integrity Analyzer advances the BERTScope Family to 17.5 Gb/s. Covering serial data
interfaces from 1 Gb Ethernet to future 16x Fibre Channel, the
BERTScope Si 17500C reduces your time to market by providing the most advanced and comprehensive combination
of signal integrity analysis and test tools available in a single
instrument. The BERTScope Si 17500C features enhanced integrated stress generation, automated optimization of preemphasis and equalization settings and optional Jitter Map
BER-based detailed jitter decomposition.
The BERTScope S has everything you will need to perform
receiver compliance testing, transmitter compliance testing
and advanced analysis. Featuring easy and flexible stress
testing, physical layer analysis such as BER Contour and Jitter measurements and a Compliance Contour view for Mask
Test, it represents a breakthrough in insight and saved development time. Compliance Contour is a bridge between BER
and mask testing, needed because of the requirements of
standards such as OIF CEI and XFP/XFI. These new standards
require compliance to masks at BER levels of 10-12, a feature
beyond the capabilities of a sampling oscilloscope.
Specifications
Pattern Generation and Error Analysis (from 500 Mb/s to
17.5 Gb/s)
Patented error location analysis
Comprehensive range of differential divided clock outputs
for supplying test devices with an instrument grade clock
External clock input upgraded to allow imposition of stress
Variable depth eye and mask measurements, to allow correlation with shallow sampling scope measurements or a
deeper, more revealing view of device performance
Jitter tolerance compliance template testing with margin testing:
High Speed BER Measurements
Integrated, Calibrated Stress Generation
Sinusoidal Jitter to 80 MHz
Random Jitter
Bounded, Uncorrelated Jitter
Sinusoidal Interference
Specifications
Comprehensive range of differential divided clock outputs
for supplying test devices with an instrument grade clock
External clock input upgraded to allow imposition of stress
Analysis (using clock recovery if desired) of signals with SSC
Analysis of physical layer parameters such as eye diagrams
and jitter while input signal has SCC on it
BER measurements down to 100 Mb/s, operable with the
internal clock or an external clock
Variable depth eye and mask measurements, to allow correlation with shallow sampling scope measurements or a
deeper, more revealing view of device performance
Optical measurement units for eye diagrams with an external optical reference receiver
Active measurement and graphing of BERTScope clock
recovery loop bandwidth and peaking
Jitter tolerance compliance template testing with margin
testing
The 12500B Analyzer offers greater than 20 GHz bandwidth
for superior jitter, Q-factor and eye measurement accuracy
and fidelity
Other and dedicated Test Sets and Configurations for PCIExpress, Display Port, USB 3.0 are available. Please ask for
Details.
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
32 Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Serial Data Signal Testing
Signal Analysis
Clock recovery you can count on
Jitter Spectrum and DCD Measurements
The BERTScope™ CR and CRJ Jitter Analyzer are fully flexible clock recovery instruments designed to make compliance
testing of today’s communication devices easy and exact.
With jitter being such a complex and contentious parameter,
each clock recovery instrument is intended to make compliance testing simple, repeatable and accurate.
The BERTScope™ CRJ Variable Clock Recovery Jitter Analyzer is based on our BERTScope CR, the highest performance instrumentation-grade adjustable clock recovery product available today. The CRJ retains all of the functionality
of the current BERTScope CR, with additional Jitter Analysis
capabilities.
The BERTScope™ CR smoothly integrates with the BERTScope family, or can be used stand-alone to bring compliance
to your existing investments in BER and sampling scope
equipment.
Full BERTScope CR functionality, including compliant clock
recovery from 150 Mb/s to 12.5 Gb/s, or to 14.3 Gb/s with Option 143; adjustable, self-measuring loop BW and peaking.
Specifications
Instrumentation quality clock recovery
150 Mb/s to 12.5 Gb/s or 14.3 Gb/s continuous coverage
Accurate variable loop bandwidth from 100 kHz to 12 MHz
Auto lock capability with LED display
Programmable peaking adjustment with first and second
order roll off settings
Self-measured and displayed PLL frequency response
Single-ended or differential 50 Ω data inputs/outputs
DC-coupled data through-path
Full and divided clock outputs with selectable divide ratios
Measurement of clock phase error as a function of frequency and time
Data measurement capability
Edge density measurement – determine the mark density of
the signal under test
Spread Spectrum Clock Waveform View & dF/dt measurement
Ideal for spread spectrum clock (SSC) applications with
large jitter excursions
Specifications
Powerful jitter measurement capability to 12.5 Gb/s
Direct spectral analysis of jitter components
‘Spectrum analyzer’ display with cursor measurements of
jitter and frequency
User-settable frequency gated measurements for band-limited integrated jitter
Preset band limits for PCIe 2.0 jitter spectrum
Direct measure of Duty Cycle Dependent (DCD) jitter
Passive ‘Pass through’ signal path — neither timing nor
amplitude on input signal are regenerate
Stand-alone software available for control through a PC
Combine with a BERTScope Signal Integrity Analyzer to
use the new Jitter Spectrum View included in the analyzer‘s
user interface
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Fiber Optical Components – Lab and Production Equipment
33
Serial Data Signal Testing
Signal Analysis
DCRJ — Optical Jitter Compliance Solution
Showing >80 MHz Jitter Spectrum
The BERTScope Digital Communications Receiver (DCRJ) optical reference receiver is a flexible, multi-functional instrument that complements the powerful signal integrity analysis
capabilities of the BERTScope S.
The DCRJ is designed for 10 Gb/s telecommunications testing,
possessing both optical and single-ended electrical data inputs. Combine the DCRJ with the BERTScope S 12500B signal
integrity analyzer for the ability to look deeper into device
performance. Generate, measure, and analyze jitter from 5
kHz to >80 MHz to test compliance, characterize performance
and design margin, and to precisely see and troubleshoot device behaviour.
Whether calibrating a stressed eye or measuring a compliance mask at 10-12 BER levels, the DCRJ is the perfect
complement to the BERTScope for greater insight in optical
serial data applications. The stressed output of the BERTScope and DCRJ also enable jitter transfer and jitter tolerance
measurements, providing the complete suite of telecom jitter
measurements.
The DCRJ can also be operated in a standalone fashion, controlled by a PC, and can be fully automated for easy integration into a manufacturing environment.
Specifications
Broad Wavelength Coverage — 700–1650 nm
Jitter Spectrum Analysis and Display to >80 MHz
Standalone Jitter Measurement Solution with Built-In, Standards-Compliant, Flexible Clock Recovery
Provides Both Optical and Single-Ended Electrical Data
Interfaces
10 Gb/s Reference Receiver for 10 GbE, OC-192/STM-64, and
10G Fibre Channel
SONET, SDH, and OTN Jitter Generation Analysis
Optical and Electrical Standards-Compliant Clock Recovery
Including:
SONET and SDH
1 and 10 Gb Ethernet
Fibre Channel
BERTScope CR Clock Recovery Functionality:
Continuous 150 Mb/s to 12.5 Gb/s Data Rate Coverage
Independently Adjustable, Self-Measuring Loop Bandwidth and Peaking
Display of Clock Recovery‘s Observed Jitter Transfer
Function
In Combination with BERTScope S:
10 Gb/s Transmitter Compliance Testing
Jitter Tolerance Test and Margin Analysis
Jitter Transfer Measurement
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
34 Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Serial Data Signal Testing
Signal Analysis
Flexible 850 nm Jitter Tolerance Testing
The new BERTScope Lightwave Test Set (LTS) 8500A is
the first flexible stress solution to offer 850 nm receiver jitter tolerance testing (stressed eye) to 8x Fibre Channel and
10 Gb/s Ethernet Short Reach (10GBASE-SR) standards for
transceiver types such as XFP and SFP+. In combination with
the BERTScope S 12500B signal integrity analyzer, the LTS
8500A offers compliance test and deep insight on all high
speed ports of common short reach optical transceivers.
The BERTScope LTS features an 850 nm optical source, and
an optional 10 Gb/s optical reference receiver (Option OPT
REC) with 10 Gbit band clock recovery, enabling transmitter
test and optical stress calibration. When combined with the
BERTScope S 12500B, all of the stress impairments required
by 1x, 2x, 4x, 8x, and 10x Fibre Channel are available, along
with those of 10GBASE-SR. For the first time, engineers are
able to generate a test quality 850 nm stressed eye, calibrate
it at the time of test if required, and then set the desired optical modulation amplitude (OMA) using the built in output
level control.
The LTS dovetails perfectly with the BERTScope S 12500B
analyzer, the BERTScope DCRJ compliance receiver with
flexible clock recovery and jitter analysis, and available automation software for making waterfall measurements and
calibrating 10 Gb/s Ethernet and 4x Fibre Channel stressed
eyes. The LTS and DCRJ are easily controlled through an intuitive user interface design on the BERTScope S analyzer.
This powerful combination comprises the BERTScope Optical Test Bench.
Specifications
850 nm Multimode Transmitter
10 GbE 10GBASE-SR Optical Stressed Eye Receiver Testing
10x, 8x, 4x, 2x, 1x Fibre Channel Optical Stressed Eye Receiver Testing
Integrated Optical Output Level Control
Automated Stressed Eye Calibration
Automated Jitter Tolerance Margin Testing
Automated Receiver Sensitivity Waterfall Curves
Integrated ISI for 8.5 Gb/s Fibre Channel Pulse Width Shrinkage
„Golden PLL“ Clock Recovery for compliant Fibre Channel
Stressed Eye Calibration and Transmitter Testing
Transmitter Compliance Testing
Also available as a standalone instrument
Companion Products
Options
BERTScope DPP Digital Pre Emphasis Processor
BERTScope ISI Board
Cable Sets
SATA Tee
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Fiber Optical Components – Lab and Production Equipment
35
Production Equipment
CW-5000 Coupler Workstation
The Lightel CW-5000 workstation allows fabricating a wide
range of fused fiber optic products, including bi-conical fused couplers, fiber tapers, and various fiber processing. Its
flexible structure and intelligent automatic control make this
workstation a highly useful machine for fiber-fusion related
manufacturing and research.
Specifications
High precision motion controller, control up to 8 motors
Optional positioning encoder to maintain required speed
and position
High torque nano-step motor for smoothest motion
16 bit A/D conversion, monitor up to 5 channel power input
3-D torch motion mechanism
Built-in Hydrogen and Oxygen (optional) mass flow controller
Built-in Curing temperature monitor/controller
Video micro-scope for advanced applications such as PM
fiber orientation, fiber cleanness check, fiber alignment etc.
Optional internal Oxygen mixer or external Oxygen nozzle
Wide selection of optional accessories
Fusion Splicer for the Lab
The S183PM Fusion Splicer series provides you the ultimate
splicing solution. Designed primarily to address production
and research splicing needs in the optical components industry, this is the most advanced series, along with S184 series, in FITEL’s extensive line of high performance machines.
Specifications
Splicing specialty and exotic fiber combinations
Very large diameter fiber splicing (up to 500 µm / 1200 µm)
Polarization maintaining fiber splicing
High-strength splicing application
RoHS compliant
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
36 Fiber Optical Components – Lab and Production Equipment
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Production Equipment
Polishing Machines
SEI-SFP-550S
This top of the line polishing machine offers excellent production throughput of up to 40 ferrules simultaneously. Offering
our widest versatility of connectors and ferrules including MT/
MPO ferrules, Fiber array and Planar Lightwave Circuit chip
processing, the SFP-550S is a high workability machine. It features a full function LCD touch panel for simplified programming of various polishing processes. Additionally, it features a
slow start function, programmable turntable speed-controller
and voltage-free power input for world-wide versatile installation. Best for use in high volume mass-production environments where critical geometry performance is required. Other
Polishing Machines and Holders are available too.
Additional Solutions
Beside the shown products we also offer
Fusion Splicer
Inspection Microscopes
Insertion and Return Loss Measurement Equipment
Measurement Equipment for Plastic Optical Fiber
Educational Kits and many more
Fiber Bragg Grating- Interrogator Systems
Launch Condition Analysis
Discontinuity Testing
And much more
 Product Specialist
Michael Riess
+49 8153 405-18
[email protected]
 Product Specialist
Dr. Christina Manzke
+49 30 962778-11
[email protected]
Sales Assistant
Sabine Beausencourt
+49 8153 405-12
[email protected]
Fiber Optical Components – Lab and Production Equipment
37
Notes
38 Fiber Optical Components – Lab and Production Equipment
Free Catalogue Order
Find all these products and many more
on our web page www.laser2000.com:
• Fiber Optics
• Network Technology
• Digital Testing
• Lasers & Lightsources
• Ophthalmic Solutions
• Laserprotection
• Optics & Optomechanics
• UV Technology
• Infrared Technology
• Optical Instrumentation
• Image Processing
Free catalogues! Webcode:
Mail order for your catalog
Fax +49 8153 405-33
9001
 Fiber Optics, 240 pages, in German
 Network Solutions, 16 pages, in German
 FO Components & Lab Equipment, 40 pages
 Optical Filters for Life Sciences, 62 pages
 Lasers and Lightsources, 124 pages, in German
 Optical Instrumentation, 104 pages, in German
 Laser Safety, 24 pages, in German
 Image Processing, 72 pages, in German
 Infrared Technology, 48 pages, in German
 Ophthalmic Systems, 12 pages

Please keep me informed by eMail.
I am particularly interested in:





Fiber Optics
Network Technology
Digital Testing
Lasers & Lightsources




Ophthalmic Solutions
Laserprotection
Optics & Optomechanics
UV Technology
 Infrared Technology
 Optical Instrumentation
 Image Processing
Call me back please.
Company / University, Department
Last name, First name
Title
Street
Number
Zip-Code / City
Country
Phone with prefix
eMail adress
Fiber Optical Components_Bulletin No. 4013
Fiber Optical Components – Lab and Production Equipment
39
Find
all these products and
Co
Fi
many more on our web page:
• Fiber Optics
• Network Technology
• Digital Testing
• Lasers & Lightsources
•Specifications
Ophthalmic Solutions
•Arrayed
Laserprotection
• Optics & Optomechanics
• UV Technology
• Infrared Technology
• Optical Instrumentation
Co
•Fibe
Image Processing
www.laser2000.com
Laser 2000 SAS
Parc d‘affaires „Le Vivier”
3 rue de la Plaine
Specifications
FR-78860
St-N. l. Bretèche
France
Arrayed
Tel. +33 1 30 800-060
Fax +33 1 30 800-040
[email protected]
Laser 2000 SAS
Doctor Palomar 28, 1°A
ES-50002 Zaragoza
Iberia
Co
Fiber
Tel. +34 976 299-150
Fax +34 976 299-150
[email protected]
Laser 2000 GmbH
Argelsrieder Feld 14
DE-82234 Wessling
Specifications
Munich/Germany
Arrayed
Tel. +49 8153 405-0
Fax +49 8153 405-33
[email protected]
Office Berlin
Pasedagplatz 3-4
DE-13088 Berlin
Tel. +49 30 962778-0
Fax +49 30 962778-29
[email protected]
Office Dresden
Geschwister-Scholl-Str. 47
DE-01877 Bischofswerda
Tel. +49 3594 705980
Fax +49 3594 705985
[email protected]
 Product Specialist
U.K.
Belgium
Michael Riess
Netherlands
+49 8153 405-18
Sweden
Phone
Phone
Phone
Phone
[email protected]
Office Mönchengladbach
Ohlerkamp 4
DE-41069 Mönchengladbach
Tel. +49 2161 307300
Fax +49 2161 307310
[email protected]
Specialist
+44 1933 461666 Product
Fax +44
1933 461699
+32 71 610 640
Fax +32 71 610
649
Dr. Christina
Manzke
+31 297 266 191
Fax +31 297 266 134
+49 30
+46 11 369 681
Fax 962778-11
+46 11 369 689
[email protected]
Office Bamberg
Hängbergstrasse 18
DE-96199 Zapfendorf
Tel. +49 9547 870369
Fax +49 9547 871281
[email protected]
!
New office
Office Wien
Christian Schöbel
AT-1160 Wien
Tel. +43 1 4810498
Fax +43 1 4810548
[email protected]
Sales Assistant
[email protected]
[email protected]
Sabine Beausencourt
[email protected]
+49 8153 405-12
[email protected]
As part of our continuous program for product improvement, Laser 2000 reserves the right to change specifications
without notice. Copyright © 2009 Laser 2000 GmbH. All Trademarks are the registered property of their respective owners.
[email protected]
www.laser2000.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement