Asus | CPX20 | User's Manual | ASUS CPX20 User's Manual

CPX20 Series
Zero Client BOX
User Guide
Table of contents
Notices.......................................................................................................... iv
Safety information........................................................................................ v
Care and cleaning........................................................................................ vi
1.1Welcome........................................................................................ 1-1
ii
1.2
Package contents.......................................................................... 1-1
1.3
Assembling the zero client box................................................... 1-2
1.4
Zero client introduction............................................................... 1-4
1.4.1
Front of the box................................................................ 1-4
1.4.2
Rear of the box................................................................ 1-5
1.4.3
Get start with client system.............................................. 1-6
1.4.4
Client Indicator Behavior.................................................. 1-6
2.1
Client setting................................................................................. 2-1
3.1
Specifications................................................................................ 3-1
3.2
Trouble shooting (FAQ)................................................................ 3-2
3.3
Supported Timing List.................................................................. 3-3
Copyright © 2014 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND
SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
iii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
Warning: This zero client complies with the EMC directive only when you
use a shielded Ethernet cable.
iv
Safety information
Use only the AC/DC adapter model:
AD891M21010ALF&AD891M21210ALF
• Before setting up the box, carefully read all the documentation that
came with the package.
• To prevent fire or shock hazard, never expose the zero client to rain or
moisture.
• Never try to open the zero client cabinet. The dangerous high voltages
inside the zero client may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
• The zero client should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power
standard.
• Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the zero
client in any area where it may become wet. Place the zero client on
a stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the zero client from damage due
to power surges.
• Never push objects or spill liquid of any kind into the slots on the zero
client cabinet.
• The socket-outlet shall be installed near the equipment and shall be
easily accessible.
• If you encounter technical problems with the zero client , contact a
qualified service technician or your retailer.
v
Care and cleaning
• Before you lift or reposition your zero client , it is better to disconnect
the cables and power cord. Follow the correct lifting techniques when
positioning the zero client . When lifting or carrying the zero client ,
grasp the edges of the zero client . Do not lift the zero client by the
stand or the cord.
• Cleaning. Turn your zero client off and unplug the power cord. Clean
the zero client surface with a lint-free, non-abrasive cloth. Stubborn
stains may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the screen. Never spray cleaner directly on the
screen, as it may drip inside the zero client and cause an electric
shock.
The following symptoms are normal with the zero client :
• The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the power switch and turn it on again to make
sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the power switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not try to repair the
zero client by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
vi
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1.
ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2.
Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
vii
1.1Welcome
Thank you for purchasing the ASUS® zero client box .
The latest zero client box from ASUS delivers you a seamless desktop and
viewing experiences.
Please enjoy the convenient and delightful experience that the zero client
brings to you!
1.2
Package contents
Check your package for the following items:
Box set
Wall mount
Base and screw
Quick start guide
Warranty card
Adapter
DVI Cable
•
1-1
If any of the above items is damaged or missing, contact your retailer
immediately..
Chapter 1: Product Introduction
1.3
1.
Assembling the zero client box
Use Base Assembly
• Attach the base to the box and fix with the screw to join them tightly.
You can easily tighten the screw by screw driver.
1
2.
2
Use Wall mount Assembly
• Attach the wall mount to the back of display and fix with the screw to
join them the tightly.
• Snap the box into the wall mount (You can use 100x100mm or
75x75mm two modes to lock it).
ASUS LCD Monitor CPX20 Series
1-2
1
2
3
4
or
1-3
Chapter 1: Product Introduction
1.4
Zero client introduction
1.4.1
Front of the box
1
1.
3
4 5
Power Indicator:
•
2.
2
The color of power indicator is as below.
Client Link LED Indicator:
•
The color of client link LED lndicator is as below.
Status
description
LED1
White
Client power on
LED1
Orange
Power Off and Wake
On Lan/ Wake On USB
LED2
Green
Link to virtual desktop
3.
USB connector
4.
Earphone-out
5.
Microphone input
ASUS LCD Monitor CPX20 Series
1-4
1.4.2
Rear of the box
1
1-5
1.
Kensington lock
2.
Power-in jack
3.
DVI-I
4.
DVI-D
5.
RJ45
6.
USB connector
2
3
4
5
6
Chapter 1: Product Introduction
1.4.3
Key
Power
Link(LED2)
1.4.4
Get start with client system
Description
Press this button to turn on/off the zero client box
Link to server
Client Indicator Behavior
Status
Power On
Power Off
Power On and Link to
Virtual Desktop
Power Off and Wake
On Lan
Power Off and Wake
On USB
POWER
White
Off
LINK
Off
Off
White
Green
Orange
Off
Orange
Off
White (Blink
Green(on for 12s
Power On to Power Off
12s then off)/
then off)
and Wake On USB
Orange(always on)
ASUS LCD Monitor CPX20 Series
1-6
2.1
Client setting
1. Turn on power
2. Login Client widget, click “[Options]“ on top left corner.
Options
3. Select “[Options]” --> “[Configuration]”.
Options
Configuration
Diagnostics
Information
User Settings
ASUS LCD Monitor CPX20 Series
2-1
4. Enter “[Configuration]” --> [Network],and select “Enable DHCP”.
Configuration
Network IPv6 SCEP Label Discovery Session Language Power Display Access Audio Reset
Change the network settings for the device
Enable DHCP:
IP Address:
192 . 168 . 100 . 51
Subnet Mask:
255 . 255 . 255 . 0
Gateway:
192 . 168 . 100 . 1
Primary DNS Server:
192 . 168 . 100 . 2
Secondary DNS Server:
0
. 0
.0
.0
Domain Name:
FQDN:
Auto
Ethernet Mode:
Enable 802.1X Security:
Identity:
Client Certificate:
OK
Cancel
Apply
5. Select [Session] sheet and enter “DNS Name or IP Address”, then click
“Apply” to execute.
Configuration
Network IPv6 SCEP Label Discovery Session Language Power Display Access Audio Reset
vmware Horizon View Client
TM
Configure the connection to a peer device
Connection Type:
DNS Name or IP Address:
View Connection Server
192.168.100.252
Advanced
OK
2-2
Cancel
Apply
Chapter 2: Setup
6. Select [Language] sheet ,and choice requisite language, then click
“Apply” to execute.
Configuration
Network IPv6 SCEP Label Discovery Session Language Power Display Access Audio Reset
Select language for the user interface
Language:
Keyboard Layout:
English
US
OK
Cancel
Apply
7. Select [OK] to finish [Configuration].
8. Return to main manual, select [Options] on top left corner and go to
[User settings].
Options
Configuration
Diagnostics
Information
User Settings
ASUS LCD Monitor CPX20 Series
2-3
9. Select [Certificate] sheet, choice item and setting, then click [OK].
User Settings
Certificate Mouse Keyboard Image
Display Topology Touch Screen
vmware Horizon View Client
TM
Certificate Checking Mode:
This mode determines how the client proceeds when it cannot verify that
your connection to the server is secure. It is not recommended that you
change this setting unless instructed to do so by your system administrator.
Never connect to untrusted servers
Warn before connecting to untrusted servers
Do not verify server identity certificates
OK
Cancel
Apply
10.Link to server IP and enter connection interface, Click [Connect].
Enter the address of the View
Connection Server.
Server:
192.168.100.252
Connect
2-4
Chapter 2: Setup
11.Enter “User name” and “password”, then click [Login].
https://192.168.100.252
Enter your user name and password
User name:
Password:
Server:
192.168.100.252
Login
Cancel
12.Click [Connect].
Log on to desktop
win7
Connect
Reser VM
Cancel
13.Enter client interface.
ASUS LCD Monitor CPX20 Series
2-5
14. Select desktop “Start”, choice “Logout” to exit client.
2-6
Chapter 2: Setup
3.1
Specifications
Model
Max. Resolution
CPX20
Single
1920 x 1200/60
Dual
2560 x 1600/60
Power ON Consumption
Mic phone
ON Mode: <20 W
Yes
Earphone
Yes
Power off
< 0.8 W
Power off and wake on LAN
< 2.5 W
Power off and wake on USB
< 1.0 W
Mounting Interface
Phys. Dimension (WxHxD)
Box Dimension (WxHxD)
Net Weight (Esti.)
Gross Weight (Esti.)
Voltage Rating
ASUS LCD Monitor CPX20 Series
100mm x 100mm & 75mm x 75mm
135 x 204.8 x 84 mm
195.6 x 31.2 x 130.5 mm
0.6 kg
1.2 kg
AC 100~240V(External)
3-1
3.2
Trouble shooting (FAQ)
Problem
Power LED is not ON
3-2
Possible Solution
• Press the button to check if the box is in the ON
mode.
• Check if the power cord is properly connected to
the box and the power outlet.
Chapter 3: General Instruction
3.3
Supported Timing List
Resolution
2560 x 1600
2048 x 1152
1920 x 1440
1920 x 1200
1920 x 1080
1856 x 1392
1792 x 1344
1680 x 1050
1600 x 1200
1600 x 900
1440 x 900
1400 x 1050
1366 x 768
1360 x 768
1280 x 1024
1280 x 960
1280 x 800
1280 x 768
1280 x 720
1024 x 768
848 x 480
800x 600
640 x 480
Refresh Rate
60Hz
60Hz
60Hz
60Hz
60Hz
56Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
* Any displays attached to the client will be set to the native resolution of 1024 x 768 when this
option is enabled.
2
1
Display
*CPX20 DVI dual-display PCoIP zero client: This zero client supports one 2560x1600 / 1920x1440
/ 1856x1392 / 1792x1344 monitor. Connect the two DVI-D cable connectors on a custom dual-link
DVI-I cable adapter to the two DVI-D ports on the zero client, as shown in the above Illustration.
ASUS LCD Monitor CPX20 Series
3-3
Download PDF

advertising