MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS

MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS
05
MOBILE GREASE UNITS
WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 KG.
05metering and control equipment
Iquip modit iriuscidunt nos niam ver ip control guns for oil and grease . . . .
. . . . . . . . . . . . . . . . . . . . .000
. . .000
. 62
other control guns, oil bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Reraessi. Dolobore volorpe rcilit lut luptat wis ad magniam dolore miniam do con elit utem dolortis
hose end meters for oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
dolorerit ver sed dolutem vullandrem adigna am esenit velisim iliquat at velent augiam dolore
hose
metersrerosto
for oil,
other service fluids . . . . . . . . . . . . . . . 65
faciliquis nostrud te magnim ea core magna feugait wisit
auteend
commolo
entgrease
lor sumand
exercil
lutat, quipisim vel irillandio consecte min eum diat, sumin-line
euisi meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
control gun and hose end meter accessories . . . . . . . . . . . . . . . . . . . . . . 67
advanced monitoring system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Control master oil monitoring system . . . . . . . . . . . . . . . . . . . . . . . . . 71
inventory management console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Product specifications are subject to change without prior notice
61
05
CONTROL GUNS for oil and grease
363 078
363 077
413 077
Oil control guns
grease control guns
Oil control guns, manufactured in aluminium, with ergonomic grip and trigger to reduce operator
hand fatigue. NBR valve with progressive action, for comfortable operation when dispensing
products, even with high ratio (10:1) oil pumps. All guns include a ball bearing inlet swivel with
large capacity screen filter.
Maximum working pressure: 105 bar (1,500 psi).
Maximum delivery: 25 l/min (6.6 US gpm).
Fluid inlet thread: 1/2" NPSM (F).
Guns available with a variety of outlets to fit every application.
High pressure grease control guns with ergonomic
body and trigger designed to reduce operator
hand fatigue. Manufactured in aluminium with
steel high pressure section.
Maximum working pressure: 500 bar (7,150 psi).
Inlet thread: 1/4" BSP (F).
Outlet thread: 1/8" BSP (F).
413 077 Grease control gun
Grease control gun with rigid outlet with 3 jaw
connector (PN 121 050).
Models
Part No.
Application
Outlet type
included
Non drip nozzle
included
363 082
-
None
None
363 075
GEAR OIL
110º rigid swiveling (369 217)
Manual
363 077
ATF , LUBRICANTS
Straight flexible (369 200)
Manual
363 078
ALL TYPES OF
LUBRICANTS
Flexible with 90º outlet,
swiveling (369 218)
Semi automatic
363 079
MOTOR OIL
60º rigid (369 215)
Semi automatic
413 080 Grease control gun with z-swivel
Grease control gun with z-swivel (PN 414 300),
rigid outlet and 3 jaw connector (PN 741 300).
413 081 Grease control gun
Grease control gun with 450 mm double steel
braid reinforced rubber hose (PN 140 050) with
3 jaw connector (PN 121 050).
413 082 Grease control gun with z-swivel
Grease control gun with z-swivel (PN 414 300)
and 450 mm double steel braid reinforced
rubber hose (PN 140 050) with 3 jaw connector
(PN 121 050).
See page 67 for accessories.
62
Product specifications are subject to change without prior notice
05
other control guns, oil bar
363 041
High delivery oil control gun
363 041 High delivery oil control gun
High delivery oil gun manufactured in steel.
With lockable trigger and guard to prevent
accidental opening of the valve. Delivered with
inlet swivel, and rigid outlet with semiautomatic
non-drip nozzle.
Maximum working pressure 100 bar.
Fluid inlet thread 3/4" NPT (F).
186 300
fluid control gun
186 300 Fluid control gun
Control gun with reinforced polyamide body
and stainless steel valve mechanism for use with
fluids like windshield washer, glycol solution
(anti-freeze) and other water based fluids.
Includes brass inlet swivel and flexible outlet
with 90º angled outlet.
Maximum working pressure: 40 bar (570 psi).
Maximum flow: 15 l/min (4 US gpm).
Inlet thread 1/2" BSP (F).
361 200
Oil bar
361 200 Oil bar
Oil dispensing bar for up to four products.
Delivered with one outlet, up to 3 additional
outlets can be mounted.
361 110 Additional outlet valve for oil bars
366 550 In-line meter kit for oil bars
An in-line meter can be mounted as an option.
See page 67 for accessories.
Product specifications are subject to change without prior notice
63
05
hose end meters for oil
365 853
365 603
METER WITH electronic DIGITAL DISPLAY
meter with mechanical display
Oval gear meter with mechanical odometer
style register, for use with lubricants up to
SAE 140. Resettable partial reading up to 999,9
litres and non-resettable totalizer. Meters are
factory calibrated for maximum accuracy and
include protective rubber shroud.
The meter is flange coupled to a durable but
light weight oil control gun that incorporates a
rugged ball bearing inlet swivel with filter.
Maximum working pressure: 70 bar (1,000 psi).
Oil flow range: 1 to 27 l.p.m. (0.26 to 7.1 US gpm).
Fluid inlet thread: 1/2" BSP (F).
365 853 Hose end meter with mechanical
register, litres
Includes outlet 369 218.
365 851 Hose end meter with mechanical
register, litres
No outlet.
365 854 Hose end meter with mechanical
register, quarts / US gallons
Includes outlet 369 218.
365 852 Hose end meter with mechanical
register, quarts / US gallons
No outlet.
Oval gear meter with electronic digital LCD display 366 750 coupled to a durable but lightweight
oil control gun that incorporates a rugged ball bearing swivel with inlet screen filter. Meter is
supplied with a protective rubber shroud.
Meters are factory calibrated. Also they, can easily be re-calibrated in the field for increased accuracy.
Meter can measure in litres , quarts, pints and US gallons.
Maximum working pressure: 70 bar (1,000 psi).
Oil flow range: 1 to 25 l/min (0.25 to 7 US gpm).
Fluid inlet thread: 1/2' BSP (F).
Models
Part No.
Application
Outlet type
365 601
-
None
365 602
MOTOR OIL
60º angled rigid outlet with semi automatic non drip tip
365 603
ALL TYPES
OF LUBRICANTS
Flexible outlet with 90º rigid stem, swiveling, with
semi automatic non drip tip
365 604
ATF
Straight flexible outlet with manual non drip tip
365 605
GEAR OIL
110º angled rigid swiveling outlet with manual non drip tip
365 607
ALL TYPES
OF LUBRICANTS
Flexible outlet with 90º rigid stem, swiveling with
manual non drip tip
See page 67 for accessories.
64
Product specifications are subject to change without prior notice
05
hose end meters for oil, grease and other service fluids
365 300
365 675
415 002
Preset hose end meter
365 300 Preset digital meter
Oval gear hose end meter with preset function.
Preset mode dispensing allows hands off
operation as the meter automatically shuts off
the oil once the preset volume is delivered.
Meter with digital display, works with four easy
to replace 1,5 AA alkaline batteries. Includes
rigid outlet with non drip nozzle and inlet
swivel.
365 710
Hose end meter for other
service fluids
WEIGHTS AND MEASUREs APpROVED
hose end meter
365 710 Weights and Measures approved
hose end meter
Oval gear hose end meter with digital display
approved by German Weights and Measures
aurothority (PTB).
Includes calibration certification, protective
shroud, inlet swivel and sight glass. Order
outlet accessory separately.
365 675 Hose end meter for other service
fluids
Oval gear hose end meter with electronic digital
LCD display for measured delivery of fluids such
as windshield washer, glycol solution and other
water based fluids. Display is powered by two
easily replaceable AAA 1,5 V alkaline batteries.
The meter has two separate displays in litres, a
resettable 4 digit batch display and a permanent
totalizer. Meters are factory calibrated and
they can easily be re-calibrated in the field for
increased accuracy. Meter can measure in litres,
quarts, pints and US gallons.
The meter is coupled to fluid control gun (PN 186 300).
Maximum working pressure: 40 bar (570 psi).
Flow range: 5 to 15 l/min (1.3 to 4 US gpm).
Fluid inlet thread: 1/2" BSP (F).
Hose end meter for grease
High pressure oval gear meter with electronical
digital LCD display for accurate greasing. The
display is powered by two easy to replace AAA
1,5 V alkaline batteries and shows the amount
delivered in grams (up to 9999 gr) and a
permanent totalizer in kilograms (up to 999999
kg). Includes a batch display reset button. Meters
are factory calibrated and they can easily be recalibrated in the field for increased accuracy. The
meter is coupled to a high pressure grease control
gun with ergonomic body and trigger to reduce
operator hand fatigue.
Maximum working pressure 500 bar (7,150 psi).
415 002 High pressure grease hose end
meter
Includes:
Double steel braid reinforce rubber hose
(400 mm) with hydraulic grease connector and
Z-swivel.
415 000 High pressure grease hose end
meter
Includes:
Z-swivel, with no outlet accessories.
See page 67 for accessories.
Product specifications are subject to change without prior notice
65
05
in-line meters
411 100
oval gear In line grease meter with electronic digital display
411 100 In line grease meter
High pressure oval gear meter with electronic digital LCD display. Batch display in grams (up to 9999
gr) and permanent totalizer in kilograms (up to 999999 kg). Batch display reset button. Meters are
factory calibrated and they can easily be re-calibrated in the field for increased accuracy. Works with
two 1,5 V AAA alkaline batteries. Maximum pressure: 500 bar (7,140 psi). Maximum flow range: up
to 1 kg/min (2.2 lb/min). Accuracy: ± 3,0 %. Inlet and outlet connections: 1/8" BSP (F).
366 750 - 836 504
OVAL GEAR in line oil METER WITH electronic DIGITAL DISPLAY
366 750 In-line oil meter with electronic digital display
Oval gear meter with electronic digital LCD display for use with lubricants up to SAE 140. The display
is powered by two easy to replace AAA 1,5 V alkaline batteries. The meter has a multifunction
display, showing in a large four digit display the volume dispensed in each transaction, and two
totals, one permanent and another resettable, which might be used for recording the total volume
dispensed during one work shift, the volume of oil left in a drum or tank, etc. Meters are factory
calibrated and they can easily be re-calibrated in the field for increased accuracy. Meter can measure
in litres, quarts, pints and US gallons.
Maximum working pressure: 70 bar (1,000 psi). Oil flow range: 1 to 25 l/min (0.25 to 7 US gpm).
Fluid inlet and outlet threads: 1/2" BSP (F). Accuracy: ± 0,5 %.
Accessory:
836 504: Protective rubber shroud for meter 366750.
366 850
oval gear in line OIL METER WITH MECHANICAL DISPLAY
Oval gear meter with mechanical odometer style register for use with lubricants up to SAE 140.
Resettable partial reading up to 999.9 litres and non-resettable totalizer. Meters are factory calibrated
for maximum accuracy and include protective rubber shroud.
Maximum working pressure: 70 bar (1,000 psi). Oil flow range: 1 to 27 lpm (0.26 to 7.1 US gpm).
Fluid inlet and outlet threads: 1/2" BSP (F). Includes protective rubber shroud. Accuracy: ±1%
366 850 Oval gear in-line meter
With mechanical register in litres.
366 851 Oval gear in-line meter
With mechanical register in quarts / US gallons.
366 725 - 366 726
High flow in line meters with electronic digital display
Oval gear in line meters with electronic digital LCD display. The meter has two separate displays: a
resettable 4 digit batch display and a 6 digit permanent totalizer. Meters are factory calibrated and
they can easily be re-calibrated in the field for increased accuracy. Meters can measure in litres,
quarts, pints or gallons. Meters are compatible with lubricants up to SAE 240, diesel and glycol
solutions.
366 725 High flow in-line meter 50 litres/min.
Works with two AAA alkaline batteries.
Maximum working pressure: 70 bar (1,000 psi).
Maximum working temperature: 60º C (140 ºF).
Flow range: 5.5 l/min (1.45 US gpm); to 50 l/min (13.2 US gpm).
Accuracy: ±0.5 %.
Pressure drop: 0.5 bar (7 psi).
Inlet and outlet threads: 1/2" BSP (F).
366 726 High flow in-line meter 100 litres/min.
Works with two AAA alkaline batteries.
Maximum working pressure: 30 bar (430 psi).
Maximum working temperature: 60º C (140 ºF).
Flow range: 9.5 l/min (2.5 US gpm); to 100 l/min (26.4 US gpm).
Accuracy: ±0.5 %.
Pressure drop: 0.5 bar (7 psi).
Inlet and outlet threads: 1" BSP (F).
66
Product specifications are subject to change without prior notice
05
control gun and hose end meter accessories
Grease control gun swivels
414 300 - 414 100
Equipped with ball bearings for easy articulation even at high pressure. For best results, use a
straight swivel between the pump and distribution hose and Z swivel between the hose and grease
control gun. Maximum working pressure: 500 bar (7,150 psi).
414 100 Straight grease swivel. 1/4" BSP (MF).
414 200 “L" grease swivel. 1/4" BSP (MF).
414 300 “Z" grease swivel. 1/4" BSP (MF).
Grease control gun outlets
140 050 - 741 300
741 306 Rigid outlet with hydraulic grease connector.
741 300 Rigid outlet with 3 jaw hydraulic grease connector (121 050).
140 050 Double steel braid reinforced grease hose, 450 mm.
741 304 Rigid outlet.
oil gun and oil hose end meter accessories
Part No.
Application
Outlet type included
Non drip nozzle
Outlets for hose end meter 365 601
369 217
369 217
GEAR OIL
110º rigid swiveling
Manual
369 200
ATF (TRANSMISSION FLUID)
Straight flexible
Manual
369 218
ALL TYPES OF LUBRICANTS
Flexible with swiveling
90º stem
Semiautomatic
369 216
ALL TYPES OF LUBRICANTS
Flexible with swiveling
90º stem
Manual
369 215
MOTOR OIL
60º rigid
Semiautomatic
369 200
369 218
369 215
Non drip nozzles
736 511
Semiautomatic non drip nozzle
736 502
Manual non drip nozzle
369 205
90º angled adaptor. For use with manual operated non drip nozzles
736 511
736 502
369 205
Swivels
736 601
1/2" BSP (F) oil inlet swivel. For use with standard hose end meters
836 404
Oil filter. To be placed between a hose and 1/2" swivel
736 601
Product specifications are subject to change without prior notice
67
advanced monitoring sYstem
5
7
3
2
4
1
6
1
AMS Access Key pad with Application
software Memory Module
(PN 381 001 + PN 381 600)
2
AMS Accesess Key pad
(PN 381 001)
3
intelligent flow control unit
(PN 381 500)
4
intelligent fluid dispense manager
(PN 381 550)
5
FLUID CONTROL UNIT
(PN 380 550)
6
Network protocol converter
(PN 381 300)
7
tank inventory system
(PN 382 100)
F
luid Management in today’s shops poses several challenges. As the size of the shop increases,
properly dispensing and controlling fluids challenges older system and equipment. Additionally,
the increased cost of today’s lubricants and the popularity of synthetic lubricants place a higher
demand for the proper accounting of lubricants usage. Samoa is proud to lead the industry with
our proven offering of inventory and fluid dispense management products. From the simplest entry
level console to sophisticated computerized management system, we can supply the equipment
required for the professional management of both new and used fluids.
The Advanced Monitoring System (AMS), the software at the heart of our state-of-the-art fluid and
inventory management system, has been installed in several thousand facilities around the world.
Based on our experience in the design of systems for fluid monitoring and the management of
workshop activities, we have brought true innovation to an old concept. We have created a system
designed to improve profitability through controlled fluid distribution work-order accountability.
The system’s ease of integration allows you to design any size of installation using a minimum
number of components, adaptable from a single-point dispense system to the largest system
including more than 100 fluid outlets. This modularity also allows the integration of complementary
functions, such as remote displays, stock level detectors, volumetric measuring probes, control
access points and the automatic scheduling of any “on/off" function and guarantees the possibility
of future evolution should new needs arise.
The network topology utilized by the AMS is the CANBUS network, which was originally developed
to manage all the functions of an automobile through one single cable. This technology gives the
system a unique simplicity of installation, whilst offering the highest reliability, accuracy and speed
of communications. CANBUS networks are used throughout industry, whenever a highly reliable
network is required.
The AMS is designed to satisfy the needs of:
A.- The user, who will be guided during the delivery transaction by a rolling menu and who will
also have access to innovative functions like automatic identification by coded key, multi-fluid
delivery againts for one work order and top up option on request
B.- The supervisor, who will have access to a wide choice of parameters that will allow him to set
up the system management criteria to best meet his specific needs. Through easy to use rolling
menus, he will be able to modify operator authorizations, to adjust tank levels and to access a
wide range of statistics.
C.- The installer, who will be able to easily install and set up the system.
Directly connected to the mains electricity supply (115 / 230 V AC) the AMS keypad has an internal
24 V DC power supply that provides the electrical power for 1 to 8 outlets, depending on the
distance. The number of AMS keypads in a system depends on the layout of the workshop and
it is not limited. The AMS can manage up to 100 outlets, each equipped with an Intelligent Flow
Control Unit.
The entire system can be controlled through a PC using a PC interface and communications adapter
together with special software. It also allows communication with the workshop Data Management
System using an additional software module.
The AMS system can also integrate the Advanced Tank Management System. This allows an
accurate control of oil inventory and the automatic updating of inventories whenever lubricants are
delivered. It also allows a pump to be stopped whenever the oil inside the tank is below a critical
level, so eliminating the possibility of air getting into the fluid distribution system.
68
Product specifications are subject to change without prior notice
05
ADVANCED MONITORING SYSTEM
381 501 - 381 953
381 600 - 381 905 - 381 001
Intelligent flow control
unit (IFCU)
Controls all parameters related with the distribution
of fluids and integrates in one single module
component all of the following elements:
• A large capacity filter easily accessed for
cleaning.
• A double channel pulse transmitter for
accurate and reliable metering.
• A solenoid valve to control the fluid line.
• A microprocessor CPU for the fluid outlet
management.
• A large 3 digit very bright display that shows
the volume dispensed during the transaction
and the outlet number when the outlet is not
in use. In most applications, there is no need
for a hose end meter.
• Three LED lights that show the IFCU status.
The IFCU connection to the fluid distribution
line is done through 1/2" threaded ports. Its
connection to the electronic network is done
through 2 standard plug in electrical connectors
(network IN / network OUT).
Access Keypads
To be mounted in the workshop to provide technicians with remote access to outlets or reels. Access
keypads include a coded key reader for user identification. As an option, a bar code reader can be
connected to the access keypad for user identification, job order or job description registration. The
access keypad also includes a slot for housing the application software memory module (381 600 one software memory module is required for each installation).
Sturdy metal casing for durability, 25 key alphanumeric keyboard and 2 x 16 digit back lit LCD
display.
381 001 AMS Access keypad with ticket printer (Voltage input: 115 - 230 V AC)
Includes a thermal ticket printer that prints a report after each transaction that includes the following
information:
• Date and time of the transaction.
• Job order number.
• Product supplied.
• Volume supplied.
• Hose reel / outlet used.
• User I.D. / name.
• Vehicle registration number (optional).
• Vehicle odometer reading (optional).
• Inventory of the fluid supplied remaining after the transaction.
Additionally, a warning message is displayed when the fluid inventory reaches the warning level
previously assigned by the supervisor.
381 501 Intelligent Flow Control Unit with
CAN controller 100 PPL
Connection threads: 1/2" BSP (F).
381 013 AMS Access keypad with ticket printer (Voltage input: 12 V DC)
381 500 Intelligent Flow Control Unit with
CAN controller 100 PPL and installation
accessories
Includes electrical connectors and two 90º
fittings for connection to the fluid distribution
line. Connection threads: 1/2" BSP (F).
381 600 Application software memory module
To be inserted into its slot in the access keypad, includes the system operating software. One
memory module must be used with every system.
381 000 AMS Access keypad without ticket printer (Voltage input: 115 - 230 V AC)
381 905 Five coded keys set
381 903 Set of electrical connectors
381 953 IFCU connection cable
500 mm cable with connectors on both ends
for connecting IFCUs when installed in a bank.
Product specifications are subject to change without prior notice
69
05
ADVANCED MONITORING SYSTEM
381 300
381 550 - 381 700
NETWORK PROTOCOL CONVERTER
AND SOFTWARE (NTPC)
INTELlIGENT FLUID DISPENSER
MANAGER (IFDM) and REMOTE DISPLAY UNIT (RDU)
381 300
The CAN network uses a different communication
system to the one usually available on PCs.
The network protocol converter allows reliable
communication with a PC through a RS232
serial port connector.
The PC software delivered with the NTPC is
user-friendly and it takes full advantage of the
flexibility and the wide possibilities of the AMS.
This software supports both daily operations
and statistical analysis, to help develop sales
and increase profit. The software runs on a PC,
in a WINDOWS environment help and uses an
ACCESS database.
381 550
The IFDM manages the flow control units whenever the system
requires a special pulse meter or solenoid valve (type of fluid, flow rate,
pressure, etc.). It has the same electronic management functions as the
IFCU. It connects to the CAN network through 2 standard electrical
connectors (Network IN / Network OUT). The unit also provides the
power to operate a solenoid valve to control a fluid line and accepts
the input from a pulse meter.
multidispense
manager
382 113
Multidispense manager
with 4 digits display
(voltage input: 12 V DC).
To be used with
12 V Access keypad
(PN 381 013). Provides
control to up 6 outlets.
381 700
High visibility 3-digit very bright display, identical to the IFCU display.
It displays in real time the delivery details of any transaction in a remote
location. It is particularly useful when a hose reel is mounted onto a
frame, which can be used from both sides. One RDU can display the
delivery of any IFCU present on the network.
381 350
Same as 381 300 with USB connection.
381 912 - 381 910 - 381 911
381 102
ACCESSORIES
power supply box
381 904 External RS-422/RS-232 Converter
381 200 Thermal ticket printer Ticket printer for installation inside the access keypad.
381 950 Cable for CAN bus Comunications cable to connect system elements, adequate in most
installations.
736 353 Wall bracket for 381 000 or 381 001 Keypads for wall mounted applications.
381 102 Additional power supply box
Each access keypad has a power supply box that
provides energy to the system for opening and
closing up to eight solenoid valves. An additional
power net box is required when one single keypad
needs to control more than eight hose reels or if the
distance between the keypad and the last IFCU is
too far.
381 912 IFCU bracket for open reels (501 and 504 series) for wall mounted applications.
736 349 Bracket for mounting up to 6 IFCUs (381 500) on top of a six hose reel stand.
Requires brackets 381 911 and 381 910 and cover 736 377.
381 911 IFCU bracket. Use together with 736 349.
381 910 IFDM or remote display (RDU) bracket. Use together with 736 349.
736 377 Cover It covers the open area of bracket 381 911 when no IFCU is installed.
70
Product specifications are subject to change without prior notice
05
MOBILE GREASE UNITS
WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 CONTROL
Cat,
KG. Patum
MASTER
este temquam
oil monitoring
rempriusqui
systemsatill
Iquip modit iriuscidunt nos niam ver ip
000 000
Reraessi. Dolobore volorpe rcilit lut luptat wis ad magniam dolore miniam do con elit utem dolortis
dolorerit ver sed dolutem vullandrem adigna am esenit velisim iliquat at velent augiam dolore
faciliquis nostrud te magnim ea core magna feugait
wisit aute commolo rerosto ent lor sum exercil
1
1
lutat, quipisim vel irillandio consecte min eum diat, sum euisi
1
3
3
2
2
4
1 Flow control unit (max. 6 per input/output box)
FCU cable
CAN bus without power transmission
2 Input/output box with remote display
CAN bus with power transmission
3 Access keypad
4 Network protocol converter NTPC
382 110
382 112
Modular fluid monitoring and security system for small to medium size applications. It can be used
to cover applications from a single access point keypad control system through to a multi-dispense
point, multi-access, PC linked system.
SYSTEM COMPONENTS
382 110 Beta Key pad BCM-R
Alphanumerical keypad to be mounted in the workshop allowing technician remote access to
outlets / reels using numerical ID authorisation. It also allows.
382 112 Multi fluid Dispense Manager with 4 digits display MFDM-LD
Provides control to up to 6 outlets and communication between different keypads. Several Input
/ Output Control Units can be used in a system whenever there are more than six outlets in the
system. Includes power supply unit. Voltage input: 115 - 230 V.
381 300 Network protocol converter and software (NTPC-RS232)
The network protocol converter allows reliable communication with a PC, through a RS232 serial
port connector.
The PC software delivered with the NTPC is user-friendly and it takes full advantage of the flexibility
and the wide possibilities of the fluid monitoring System. This software supports both daily
operations and statistical analysis, to help develop sales and increase profit. The software runs on a
PC, in a WINDOWS environment and uses an ACCESS database.
381 350 Network protocol converter and software (NTPC-USB).
Same as 381 300 with USB connection.
382 116 Beta Validation Chip and PC Software for RS232 connection to Beta Keypad
A Beta validation Chip can be placed into the Beta Keypad in order to connect it directly to PC
(through RS232 port).
PULSE METERs*
600 281 In line pulse meter
600 600 In line pulse meter for wind shield wash and antifreeze
380 550
380 551
Solenoid valve*
389 001 Solenoid valve
Fluid control units
Line meter with 328 pulses per litre and solenoid valve assembly. The line meter monitors the fluid
flow and sends electronic pulses to the Input/Output unit. The solenoid valve opens and closes
the hose reel selected. Meter and valve are constructed and tested to guarantee accurate and safe
function.
380 550 Fluid control unit for oil and antifreeze
Includes line meter 600 281 and solenoid valve 389 001. Unit also includes Y strainer at the fluid
inlet. Connection threads: 1/2" BSP (MM) with 60º cone seal.
380 551 Fluid control unit for windscreen washer and detergents
Includes line meter 600 600 and solenoid valve 389 001. Unit also includes Y strainer at the fluid
inlet. Connection threads: 1/2" BSP (MM) with 60º cone seal.
* See page 73 for more information.
Product specifications are subject to change without prior notice
71
2
05
inventory
Cat, Patummanagement
este temquamconsole
rempriusqui satill
000meter (max. 2)
Pulse
1000
Iquip modit iriuscidunt nos niam ver ip
2 Solenoid valve (max. 10)
Reraessi. Dolobore volorpe rcilit lut luptat wis ad magniam dolore miniam do con elit utem dolortis
dolorerit ver sed dolutem vullandrem adigna am esenit velisim iliquat at velent augiam dolore
faciliquis nostrud
2 te magnim ea
2 core magna feugait wisit
2 aute commolo
2 rerosto ent lor sum exercil
lutat, quipisim vel irillandio consecte min eum diat, sum euisi
3 Key pad module
1
1
3
T
his powerful console is designed for shops that want simple control of their fluids. IMC offers
ease of operation, great value and several features not previously available in entry level Fluid
Management and Control System.
IMC works with one pulse meter at each pump (maximum two pulse meters) and a solenoid valve
at each fluid outlet (maximum 10 solenoid valves in total). The system does not allow simultaneous
operation outlets with the same fluid; however different fluids can be dispensed simultaneously.
An upgraded Inventory Management Console, which allows connection to a PC, is available.
PC connection makes setting and maintaining the system parameters easier and it is a powerful
inventory control tool that allows tank level monitoring to alert the oil vendor or the shop purchase
department with an email when the oil inventory level is low.
IMC standard features and capabilities are:
• Controls one or two fluids and up to 10 dispense points. Manages simultaneous dispensing of two
different fluids.
• Up to 200 users, system access through pin number or coded key.
• Allows control of one air valve, so air supply is only available during service operating hours.
• Inventory management on a declining balance: allows initial inventory to be entered and deducts
for each dispense. Manager needs to enter each delivery and the console alerts when inventory
level is low.
• Two operation levels, user and manager levels. At user level it is only possible to order a dispense.
At manager level is possible to adjust inventory levels, set inventory warning levels and perform
other management functions.
• The system requires 115 to 230 V AC mains power.
• Can work with metric or US units of measure.
72
Product specifications are subject to change without prior notice
05
inventory management console
Iquipcomponents
Imc
modit iriuscidunt nos niam ver ip
000 000
381 002
381 002 Inventory management console module - 230 V
Access keypad designed to monitor and control fluid dispenses in a workshop from a single or
central location. It can control a total of 10 different outlets with two different fluids. The unit tracks
fluid dispenses for every single work order and provides additional information regarding each
fluid such as current stock, reorder level and stop level. The IMC can also manage a solenoid valve
to control the air powering the pumps, either according to a service planning schedule or from a
command entered on the keypad by a manager. Four float type level switches provide the signals
to control waste fluid levels in two waste fluid tanks and prevent overflow of used oil by disabling
the waste product pump.
381 004 Inventory management console module - 115 V
Same as 381 002 for 115 V.
381 003 Inventory management console module with PC connection - 230 V
Similar to model 381 002 plus includes a validation chip and PC software that enables the setting
and maintaining of system parameters through a PC. Also, the PC can alert the oil vender or shop
Purchasing Department with an email when the oil inventory level is low.
381 005 Inventory management console module with PC connection - 115 V
Same as 381 003 for 115 V.
600 281
600 600
389 001
pulse meter
pulse meter other fluids
solenoid valve
600 281 In line pulse meter
Line meter with 328 pulses per litre pulse
transmitter output. For connection to each
pump outlet or to the Advanced Monitoring
System when using the Intelligent Fluid
Dispenser Manager (PN 381 550). Meter does
not have display or function buttons. Equipped
with connection terminal and reel open
indication light. For use with lubricants.
600 600 In line pulse meter for windshield
washer and antifreeze
Line meter with 328 pulses per litre pulse
transmitter output. For connection to each pump
outlet or to the Advanced Monitoring System
when using the Intelligent Fluid Dispense
Manager (PN 381 550). Meter does not have
display or function buttons.
Manufactured in stainless steel with Viton seals.
Equipped with connection terminal and inlet
strainer. For use with windscreen wash fluids,
detergents and antifreeze mixed with water.
Inlet-Outlet: 1/2" BSP (M) with 60º cone seal.
Minimum flow: 1,5 l/min (0.4 US gpm).
Maximum flow: 30 l/min (8 US gpm).
Maximum working pressure: 150 bar (2,150 psi).
389 001 Solenoid valve
24 V DC solenoid valve for oil, glycol and wind
screen washing fluids.
Inlet - Outlet: 1/2" BSP (F). Maximum working
pressure: 50 Bar (715 psi).
Inlet-Outlet: 1/2" BSP (M) with 60º cone seal.
Minimum flow: 1,5 l/min (0.4 US gpm).
Maximum flow: 15 l/min (4 US gpm).
Maximum working pressure: 50 bar (715 psi).
Product specifications are subject to change without prior notice
73
05
tank alert and tank management systems
382 001
Iquip ALERT
TANK
modit SYSTEM
iriuscidunt nos niam ver ip
Protects the pump from running dry and the waste oil tanks from overflowing. The module can
accept up to four tank level sensors, e.g. three low level sensors in fresh oil tanks and one high level
sensor in a waste oil storage tank. The unit includes four indicator LEDs and an acoustic alarm signal
that give a warning when each of the tanks reaches a critical level. 230 V – 50 Hz AC.
When the Tank Alert System is connected to an Advanced Monitoring System, AMS, it provides
signals to warn of a high level in the waste oil tank (to prevent overflow) and to warn of low levels
in the new oil tank, making possible to automatically close a solenoid valve in the pump air supply
(to prevent air entering the fluid lines and to stop the pumps running dry).
382 001 Tank Alert module.
Stand alone unit
382 050 Tank Alert module for AMS
Connected to the AMS system, when the Tank Alert system is connected to AMS, provides signals
to warn of a high level in the waste oil tank (to prevent overflow) and to warn of low levels in the
new oil tank (to prevent air entering the fluid lines and to stop the pumps running dry).
382 010
382 010 High level sensor
For use with models 382 050 and 382 001. Fits into 2" bung openings.
382 012 Low level sensor
For use with models 382 050 and 382 001. Fits into 2" bung openings.
382 015 High low level sensor
For use with models 382 050 and 382 001. Fits into 2" bung openings.
382 005 Flashing alarm light
For use with models 382 050 and 382 001.
382 100
382 120
TANK MANAGEMENT SYSTEM
Control module for monitoring the volume in up to four tanks using barometric level sensors. The
level sensors provide accurate measurement of the volume in each tank and it is possible to set
critical control threshold levels that define when the Tank Management System should stop the air
supply to each pump (using a solenoid valve PN 389 001). The system can work as a stand-alone
unit or as part of an Advanced Monitoring System AMS.
When used as a stand-alone unit, the system is set up using an access keypad (PN 382 110). This
keypad is used to set up tank parameters and the threshold levels and the actions required from
the system, such as closing a solenoid valve that controls the air supply to a pump. Optionally, the
system can be controlled and set up through a PC using a software pack that includes a validation
chip that must be installed inside the access keypad.
When used with an AMS system, the Tank Management System is connected directly to any keypad
in the system (AMM version 3.1.3 or higher) and it transmits accurate real time information about
the inventory in the oil tanks, increasing system security, and reliability of the oil inventories. This
way manual inventory adjustments are no longer required, for example when new oil is supplied
into a tank. When the AMS is running connected to a PC, using AMS-WIN PC version 2.1 or higher,
the tank inventory system is controlled and set up through the AMS software.
382 100 Tank Management System module
382 110 Tank Management System access keypad
Required to set-up the system when working as a stand-alone unit.
382 115 PC software kit for Tank Management System
Includes software and validation chip.
382 120 Level sensor for Tank Management System
Tank maximum depth 400 cm.
74
Product specifications are subject to change without prior notice
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement