Power Meter HM8115-2 - Test Equipment Depot

Power Meter HM8115-2 - Test Equipment Depot
Power Meter HM8115-2
Power measurement up to 8 kW
Simultaneous reading of votage, current and power
Selectable reading of power(W), reactive power(Var) and apparent power(VA)
Measurement of the power factor PF
Auto ranging, simplified measurement
Controllable using RS232 interface
The HM8115-2 is an easy to handle power meter with a good
accuracy for laboratory application or monitoring. It offers all
necessary features at reasonable costs. Fully isolated auto
ranging inputs and simultaneously reading of voltage, current
and power guarantee a simplified measurement. The showing
Specifications
Ref. Temperature: +18°C to +28°C
Voltage (True RMS (AC+DC))
Current (True RMS (AC+DC))
Current ranges:
160mA 1,6A
16A
Resolution:
1mA 1mA 10mA
Accuracy:
±(0,4% + 5 digits) at 20Hz -1kHz
±(0,6% + 5 digits) at DC
Crest factor:
max. 4 at full scale
Input protection:
fuse 16 A super-quick
reacting (FF), 6,3x32mm
Active power
Ranges:
8W, 24W, 80W, 240W,
800W, 2400W, 8000W
Resolution:
1mW, 10mW, 10mW, 100mW,
100mW, 1W, 1W
Accuracy: ±(0,5% + 10 digits) at 20 Hz - 1kHz
±(0,5% + 10 digits) at DC
Display:
4 digit, 7-segment LED
Reactive power
Resolution:
230403
Accuracy:
4 digit, 7-segment LED
Apparent power
Voltage ranges:
50V 150V 500V
Resolution:
0,1V
1V
1V
Accuracy:
±(0,4% + 5 digits) at 20Hz -1kHz
±(0,6% + 5 digits) at DC
Input impedance:
1 MΩ II 100pF
Crest factor:
max. 3,5 at full scale
Input protection:
500Vpeak
Ranges:
Display:
of all parameters at a glance makes the HM8115-2 very
helpful for monitoring. The RS232 interface makes it possible
to read data from the HM8115-2 or set the parameters of the
measuring instrument. For this case the HM8115-2 is exceptionally well-suited for automated testing systems.
8Var, 24Var, 80Var, 240 /800Var,
2400 / 8000Var
1mVar, 10mVar, 10mVar,
100mVar, 1Var
±(2,5 % + 10 digits + 0,02 x P) at
20Hz - 400Hz, P = active power
Ranges:
8VA, 24VA, 80 VA, 240 /800VA,
2400 / 8000VA
Resolution:
1mVA, 10mVA, 10mVA,
100mVA, 1VA
Accuracy: ±(0,8 % + 5 digits) at 20Hz – 1kHz
Display:
4 digit, 7-segment LED
Power factor
Reading:
0,00 to +1,00
Accuracy (50-60 Hz): ±(2% + 3 digits) Voltage
and current (sinusoidal) and > 1/10 full scale
Monitor (analogue output)
Output: BNC connector (electrically insulated
against measured input and RS232 interface)
Output level:1Vrms at full scale (2400/8000 digits)
Reference potential:
protective earth
Accuracy:
typ. 5 %
Output impedance:
about 10kΩ
Bandwith:
DC to 1kHz
Protection:
± 30V
Interface
Type:
RS-232 (3 wires)
Protocol:
Xon / Xoff
Transmission rates:
1200 / 9600 Baud
Functions:
control / data request
Output:
D-Sub (electrically insulated against
measured input and monitor output)
Operation / Display
Operations: voltage, current, power, power factor
Range selection:
automatic / manual
Overranging indicator:
optical, acoustical
Voltage display:
3 digit,7-segment LED
Current display:
4 digit,7-segment LED
Combined display for:
Power, reactive power and
apparent power:
4 digit,7-segment LED
Power factor:
3 digit,7-segment LED
General specifications
Power supply:
115/230 V ± 10%, 50/60 Hz
protection class I, EN 61010 (IEC 1010)
Power consumption:
approx. 15W at 50Hz
Operating temperature:
0°....+40°C
Operating humidity:
< 80%
Dimensions:
B 285, H 75, T 365 mm
Weight:
approx. 4kg
subject to change without notice
Accessories supplied:
Power Meter HM8115-2,
power cord, operating manual,
warranty card
Optional Accessories:
HZ33 / HZ34 / HZ42
Cable BNC / BNC,
19" rack mount kit, 2HU
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement