advertisement
▼
Scroll to page 2
Caution for AC mains lead o nl ow About Bluetooth® D Supplied accessories (For the AC mains plug of three pins) Check and identify the supplied accessories. Panasonic bears no responsibility for data and/or information that can possibly be compromised during a wireless transmission. For the United Kingdom and Ireland For Australia and New Zealand 2 AC mains leads (K2CT2YY00097) 1 AM loop antenna (RSAX0002) Placement of speakers How to replace the fuse The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. Figure A Sales and Support Information For the United Kingdom and Ireland Customer Communications Centre • For customers within the UK: 0844 844 3899 • For customers within Ireland: 01 289 8333 • Monday – Friday 9:00am – 5:00pm (Excluding public holidays). • For further support on your product, please visit our website: www.panasonic.co.uk Figure B Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. Manufactured by: Panasonic Corporation Kadoma, Osaka, Japan Importer for Europe: Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Panasonic Corporation Web Site: http://panasonic.net E System SC-AKX18 Main unit SA-AKX18 Speakers SB-AKX18 Safety precautions WARNING! Unit • To reduce the risk of fire, electric shock or product damage, – Do not expose this unit to rain, moisture, dripping or splashing. – Do not place objects filled with liquids, such as vases, on this unit. – Use only the recommended accessories. – Do not remove covers. – Do not repair this unit by yourself. Refer servicing to qualified service personnel. • Do not let metal objects fall inside this unit. CAUTION! Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation. By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment. For more information about collection and recycling, please contact your local municipality. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. Note for the battery symbol (bottom symbol): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. 2. Replace the fuse and close or attach the fuse cover. Figure A Figure B Maintenance To clean this system, wipe with a soft, dry cloth. • Never use alcohol, paint thinner or benzine to clean this system. • Before using chemically treated cloth, read the instructions that came with the cloth carefully. Note: • Keep your speakers more than 10 mm from the main unit for ventilation. • Put the speakers on a flat safe surface. • These speakers do not have magnetic shielding. Do not put them near TVs, PCs or other equipment easily influenced by magnetism. • When you play at high levels for a long period, it can cause damage to the speakers and decrease the life of the speakers. • Decrease the volume in these conditions to prevent damage: – When the sound is distorted. – When you adjust the sound quality. CAUTION! • Use the speakers only with the recommended system. If not, you can cause damage to the amplifier and speakers and can cause a fire. Consult an approved service personnel if damage occurs or if there is a sudden apparent change in performance. • Do the procedures included in these instructions when you attach the speakers. Unit • To reduce the risk of fire, electric shock or product damage, – Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. – Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. – Do not place sources of naked flames, such as lighted candles, on this unit. • Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. • This unit is intended for use in moderate climates. • This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone. • This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Battery • Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. • When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal. • Do not heat or expose to flame. • Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. • Do not break open or short-circuit the battery. • Do not charge the alkaline or manganese battery. • Do not use the battery if the cover has peeled off. • Remove the battery if you do not use the remote control for a long period of time. Keep in a cool, dark area. Specifications 1177 Declaration of Conformity (DoC) Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Connect the speakers. Connect the AC mains lead. (For the AC mains plug of three pins) READ THE “Caution for AC mains lead” BEFORE CONNECTION. Conserving power The system consumes a small amount of power even when it is in standby mode. Disconnect the power supply if you do not use the system. Some settings will be lost after you disconnect the system. You have to set them again. 2 Connect the FM indoor antenna. Put the antenna where reception is best. For the United Kingdom and Ireland Connect the FM outdoor antenna Use an outdoor antenna if the reception is poor. CAUTION! Keep the antenna plug adaptor out of reach of children to prevent swallowing. Note: • Do not use the outdoor antenna during a lightning storm. • Disconnect the outdoor antenna if you do not use the system. Magyar MegfelelĘségi Nyilatkozat (DoC) Ű Amplifier section Ű USB section “Panasonic Corporation” erklærer at utstyret er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF. Ezennel a, “Panasonic Corporation” kijelenti, hogy a jelen termék kielégíti az 1999/5/EK Irányelv létfontosságú követelményeit és más vonatkozó rendelkezéseit. A vásárlók letölthetik az R&TTE termékek eredeti DoC másolatát a DoC szerverünkrĘl: http://www.doc.panasonic.de Forduljon a hivatalos márkaképviselethez: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Németország A terméket általános fogyasztóknak szánták. (3-as kategória) RMS output power stereo mode Front Ch (both ch driven) 175 W per channel (4 ȍ), 1 kHz, 30% THD Total RMS stereo mode power 350 W (30% THD) USB port USB standard Media file format support USB device file system USB port power Kundene kan laste ned en kopi av den originalesamsvarserklæringen (DoC) for vårt R&TTE utstyr fra vår DoC server: http://www.doc.panasonic.de Kontakt vår autoriserte representant: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Tyskland This product is intended for general consumer. (Category 3) Utstyret er beregnet på den vanlige forbruker. (Klasse 3) Lietuviškai Atitikties deklaracija (AD) Eesti keel Vastavusdeklaratsioon (DoC) Bendrovơ “Panasonic Corporation” patvirtina, kad šis gaminys tenkina direktyvos 1999/5/EB esminius reikalavimus ir kitas taikytinas nuostatas. Mnjsǐ R&TTE gaminiǐ originalios atitikties deklaracijos kopiją klientai gali atsisiǐsti iš mnjsǐ AD serverio: http://www.doc.panasonic.de Ʋgaliotojo atstovo adresas: “Panasonic Marketing Europe GmbH”, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Vokietija. “Panasonic Corporation” kinnitab käesolevaga, et see toode on vastavuses põhiliste nõuete ja muude direktiivi 1999/5/EÜ asjakohaste sätetega. Šis gaminys skirtas bendrajam vartojimui. (3 kategorija) Slovensky Vyhlásenie o zhode (DoC) “Panasonic Corporation” týmto prehlasuje, že tento výrobok je v zhode so základnými požiadavkami a ćalšími príslušnými ustanoveniami smernice 1999/5/ES. Zákazníci si môžu stiahnuĢ kópiu pôvodného DoC na naše R&TTE výrobky z nášho servera DoC: http://www.doc.panasonic.de Kontakt na splnomocneného zástupcu: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Nemecko Tento produkt je urþený pre všeobecného spotrebiteĐa. (Kategória 3) Slovensko Izjava o skladnosti (DoC) S priþujoþo izjavo podjetje “Panasonic Corporation” izjavlja, da so svoji izdelki skladni s poglavitnimi zahtevami in drugimi odgovarjajoþimi predpisi direktive 1999/5/ES. Stranka lahko naloži izvod izvirnega DoC o naših izdelkih R&TTE s strežnika DoC: http://www.doc.panasonic.de Pooblašþeni zastopnik: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Nemþija Limited Warranty (Australia) Norsk Samsvarserklæring (DoC) Customers can download a copy of the original DoC to our R&TTE products from our DoC Server: http://www.doc.panasonic.de Contact to Authorised Representative: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany Izdelek je namenjen splošni uporabi. (Razred 3) A5 16 Portrait.indd 1 MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. 3 4 L0214LC1044 AC mains lead • The mains plug is the disconnecting device. Install this unit so that the mains plug can be unplugged from the socket outlet immediately. Back of product Use only the supplied speakers. You can cause damage to the system and decrease the sound quality if you use other speakers. Licenses Google Play and Android are trademarks of Google Inc. Connect the AM loop antenna. Stand the antenna up on its base until it clicks. The left and right speakers are the same. You cannot remove the net of the speakers. Fuse (5 ampere) The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. 1 Do not use an AC mains lead from other equipment. Fuse (5 ampere) RQT9896-1B © Panasonic Corporation 2014 Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same. Your system and the illustrations can look differently. These operating instructions are applicable to the following system. GN En Direct Sales at Panasonic UK • Order accessory and consumable items for your product with ease and confidence by phoning our Customer Communications Centre Monday – Friday 9:00am – 5:00pm (Excluding public holidays). • Or go on line through our Internet Accessory ordering application at www.pas-europe.com. • Most major credit and debit cards accepted. • All enquiries transactions and distribution facilities are provided directly by Panasonic UK. • It couldn’t be simpler! • Also available through our Internet is direct shopping for a wide range of finished products. Take a browse on our website for further details. To household mains socket Fuse cover Interference from other devices • This system may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if this unit is located too close to other Bluetooth® devices or the devices that use the 2.4 GHz band. • This system may not function properly if radio waves from a nearby broadcasting station, etc. is too strong. Intended usage • This system is for normal, general use only. • Do not use this system near an equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc.). 2 1. Open the fuse cover with a screwdriver. Range of use • Use this device at a maximum range of 10 m. • The range can decrease depending on the environment, obstacles or interference. A e .b For the United Kingdom and Ireland 1 Antenna plug adaptor (K1YZ02000013) A rre Before use Remove the connector cover. 2 Install the battery so that the poles (+ and –) align with those in the remote control. o nb (N2QAYB000944) 4 Use alkaline or manganese battery. de 1 Remote control battery 1 Remote control If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer. an 1 FM indoor antenna on the 1 .v Restrictions of use • Wireless transmission and/or usage with all Bluetooth® equipped devices is not guaranteed. • All devices must conform to standards set by Bluetooth SIG, Inc. • Depending on the specifications and settings of a device, it can fail to connect or some operations can be different. • This system supports Bluetooth® security features. But depending on the operating environment and/or settings, this security is possibly not sufficient. Transmit data wirelessly to this system with caution. • This system cannot transmit data to a Bluetooth® device. (N1DYYYY00011) or the BSI mark w w SC-AKX18 (K2CQ2YY00119) Check for the ASTA mark body of the fuse. 2 w Model No. For others 3 m For the United Kingdom and Ireland This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. fro Certification • This system conforms to the frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. • The actions below are punishable by law: – Taking apart or modifying the main unit. – Removing specification indications. 1 AC mains lead Connect the AC mains lead only after all the other connections have been made. For your safety, please read the following text carefully. ed CD Stereo System Frequency band • This system uses the 2.4 GHz frequency band. Making the connections ad Operating Instructions Use numbers indicated in parentheses when asking for replacement parts. (Product numbers correct as of February 2014. These may be subject to change.) Preparing the remote control Kliendid saavad koopia meie R&TTE toodetele kehtiva originaalvastavusdeklaratsiooni koopia alla laadida meie DoC serverist: http://www.doc.panasonic.de Võtke ühendust volitatud esindajaga: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany Ȼɴɥɝɚɪɫɤɢ Ⱦɟɤɥɚɪɚɰɢɹ ɡɚ ɫɴɨɬɜɟɬɫɬɜɢɟ (DoC) “Panasonic Corporation” ɞɟɤɥɚɪɢɪɚ, ɱɟ ɬɨɡɢ ɩɪɨɞɭɤɬ ɫɴɨɬɜɟɬɫɬɜɚ ɧɚ ɫɴɳɟɫɬɜɟɧɢɬɟ ɢɡɢɫɤɜɚɧɢɹ ɢ ɞɪɭɝɢɬɟ ɩɪɢɥɨɠɢɦɢ ɪɚɡɩɨɪɟɞɛɢ ɧɚ Ⱦɢɪɟɤɬɢɜɚ 1999/5/EC. Ű Tuner, terminals section Preset memory FM 30 stations AM 15 stations Frequency modulation (FM) Frequency range 87.50 MHz to 108.00 MHz (50 kHz step) Antenna terminals 75 ȍ (unbalanced) Amplitude modulation (AM) Frequency range 522 kHz to 1629 kHz (9 kHz step) 520 kHz to 1630 kHz (10 kHz step) Analog audio input Pin jack (1 system) Panasonic Warranty USB 2.0 full speed MP3 (*.mp3) FAT12, FAT16, FAT32 500 mA (max) Ű Speaker section Speaker unit(s) Woofer Tweeter 16 cm cone type 6 cm cone type 4ȍ Impedance Dimensions (W x H x D) 200 mm x 334 mm x 233 mm Mass 3 kg Ű General Power supply Ű Disc section AC 220 V to 240 V, 50 Hz Power consumption 50 W ɉɨɬɪɟɛɢɬɟɥɢɬɟ ɦɨɝɚɬ ɞɚ ɫɜɚɥɹɬ ɤɨɩɢɟ ɨɬ ɨɪɢɝɢɧɚɥɧɢɬɟ DoC ɤɴɦ ɧɚɲɢɬɟ ɩɪɨɞɭɤɬɢɬɟ ɨɬ ɬɢɩɚ R&TTE ɨɬ ɫɴɪɜɴɪɚ, ɧɚ ɤɨɣɬɨ ɫɟ ɫɴɯɪɚɧɹɜɚɬ DoC: http://www.doc.panasonic.de Ɂɚ ɤɨɧɬɚɤɬ ɫ ɨɬɨɪɢɡɢɪɚɧ ɩɪɟɞɫɬɚɜɢɬɟɥ: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Ƚɟɪɦɚɧɢɹ Disc played (8 cm or 12 cm) CD, CD-R/RW (CD-DA, MP3 ) Dimensions (W x H x D) Pick up Wavelength Operating temperature range Latviski AtbilstƯbas deklarƗcija (DoC) Ɍɨɡɢ ɩɪɨɞɭɤɬ ɟ ɩɪɟɞɧɚɡɧɚɱɟɧ ɡɚ ɨɛɳɚ ɭɩɨɬɪɟɛɚ. (Ʉɚɬɟɝɨɪɢɹ 3) Version KompƗnija “Panasonic Corporation” ar šo paziƼo, ka šis izstrƗdƗjums atbilst bnjtiskƗm prasƯbƗm un citƗm saistošƗm DirektƯvas 1999/5/EK prasƯbƗm. PircƝji var lejupielƗdƝt oriƧinƗlo DoC kopiju mnjsu R&TTE izstrƗdƗjumos no mnjsu DoC servera: http://www.doc.panasonic.de Lnjdzam sazinƗties ar pilnvaroto parstƗvi: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany Šis izstrƗdƗjums ir paredzƝts parastam patƝrƝtƗjam. (3. kategorija) Hrvatski Deklaracija o podobnosti (DoC) Supported profiles See toode on mõeldud tavakasutajale. (III kategooria) Român DeclaraĠie de Conformitate (DoC) Prin prezenta, societatea “Panasonic Corporation” declară că produsul este conform cu cerinĠele esenĠiale úi cu alte norme corespunzătoare Directivei 1999/5/EC. ClienĠii pot descărca o copie a DoC-ului original al produselor noastre R&TTE de la adressa noastră DoC din Internet: http://www.doc.panasonic.de Contact la ReprezentanĠa autorizată: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germania Acest produs a fost proiectat pentru clientela generală. (Categoria 3) Ovime, “Panasonic Corporation” izjavljuje da je ovaj proizvod udovoljava osnovnim zahtjevima i ostalim relevantnim uvjetima Smjernice 1999/5/EC. Kupci mogu preuzeti kopiju originalne DoC za naše R&TTE proizvode s našeg DoC poslužitelja: http://www.doc.panasonic.de Obratite se ovlaštenom predstavniku: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Njemaþka Ovaj proizvod je namijenjen za opüu potrošnju. (Kategorija 3) 790 nm (CD) MPEG-1 Layer 3 Ű Bluetooth® section Class Operating frequency Operation distance 230 mm x 335 mm x 243 mm Mass 2.7 kg 0°C to +40°C Operating humidity range 35% to 80% RH (no condensation) Power consumption in standby mode Bluetooth® Ver. 2.1 + EDR Class 2 A2DP, AVRCP, SPP 2.4 GHz band, FH-SS 10 m line of sight 0.5 W (approximate) Power consumption in standby mode (With “BLUETOOTH STANDBY” set to “ON”) 0.6 W (approximate) Note: • Specifications are subject to change without notice. Mass and dimensions are approximate. • Total harmonic distortion is measured by the digital spectrum analyzer. 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. 2. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised Distributors or Dealers and only where the products are used and serviced within Australia or it's territories. Warranty cover only applies to service carried out by a Panasonic Authorised Service Centre and only if valid proof of purchase is presented when warranty service is requested. 3. This warranty only applies if the product has been installed and used in accordance with the manufacturer’s recommendations (as noted in the operating instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty covers normal domestic use only and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation, accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm activity, infestation by insects or vermin, tampering or repair by unauthorised persons (including unauthorised alterations), introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, exposure to abnormally corrosive conditions or any foreign object or matter having entered the product. 4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase: (a) Cabinet Part(s) (e) DVD, Blu-ray or Recordable Discs (b) Video or Audio Tapes ( f ) Video / Audio Heads from wear and tear in normal use (c) SD cards or USB devices (g) Information stored on Hard Disk Drive, USB stick or SD card (d) User replaceable Batteries (h) DTV reception issues caused by TV Aerial / Cabling / Wall socket(s) etc 5. Some products may be supplied with Ethernet connection hardware. The warranty is limited on such products and will not cover (a) Internet and or DLNA connection / setup related problems (b) Access fees and or charges incurred for internet connection (c) The use of incompatible software or software not specifically stipulated in the product operations manual; and (d) Any indirect or consequential costs associated with the incorrect use or misuse of the hardware, its connection to the internet or any other device. 6. To claim warranty service, when required, you should: 7HOHSKRQH3DQDVRQLF¶V&XVWRPHU&DUH&HQWUHRQRUYLVLWRXUZHEVLWHUHIHUUHGWREHORZDQGXVHWKH6HUYLFH&HQWUH Locator for the name/address of the nearest Authorised Service Centre. 6HQGRUWDNHWKHSURGXFWWRD3DQDVRQLF$XWKRULVHG6HUYLFH&HQWUHWRJHWKHUZLWK\RXUSURRIRISXUFKDVHUHFHLSWDVDSURRIRI purchase date. Please note that freight and insurance to and / or from your nearest Authorised Service Centre must be arranged by you. 1RWHWKDWKRPHRUSLFNXSGHOLYHU\VHUYLFHLVDYDLODEOHIRUWKHIROORZLQJSURGXFWVLQWKHPDMRUPHWURSROLWDQDUHDVRI$XVWUDOLDRU the normal operating areas of the nearest Authorised Service Centres: - Plasma/LCD televisions / displays (screen size greater than 103 cm) 7. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or re-installation of a product, including costs related to the mounting, de-mounting or remounting of any screen, (and any other ancillary activities), delivery, handling, freighting, transportation or insurance of the product or any part thereof or replacement of and do not extend to, and exclude, any damage or loss occurring by reason of, during, associated with, or related to such installation, de-installation, re-installation or transit. Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however, coverage will vary dependant on product. For advice on exact Authorised Service Centre locations for your product, please telephone our Customer Care Centre on 132600 or visit our website and use the Service Centre Locator. In addition to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded under the Australian Consumer Law. If there is a major failure with the product, you can reject the product and elect to have a refund or to have the product replaced or if you wish you may elect to keep the goods and be compensated for the drop in value of the goods. You are also entitled to have the product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount to a major failure. If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable period by contacting the Panasonic Customer Care Centre. If the failure in the product is not a major failure then Panasonic may choose to repair or replace the product and will do so in a reasonable period of time from receiving notice from you. THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE) SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES If you require assistance regarding warranty conditions or any other enquiries, please visit the Panasonic Australia website www.panasonic.com.au or contact by phone on 132 600 If phoning in, please ensure you have your operating instructions available. Panasonic Australia Pty. Limited ACN 001 592 187 ABN 83 001 592 187 1 Innovation Road, Macquarie Park NSW 2113 PRO-031-F11 Issue: 4.0 01-01-2011 17/04/2014 4:58:08 PM B Select the audio source C Basic playback control 1 2 D View the setup menu Press [USB/CD] to select “CD”. Press [CD x] (main unit: [x OPEN/CLOSE]) to open the disc tray. Put in a disc with the label facing up. 4 H Decrease the brightness of the display panel To cancel, press the button again. K L K View the play menu F M Remote control sensor Press [CD x] (main unit: [x OPEN/CLOSE]) again to close the disc tray. USB Preparation Before you connect a USB device to the system, make sure you do a backup of the data. D.BASS N Select the sound effects Preparation If this system is connected to a Bluetooth® device, disconnect it (Z“Disconnecting a device”). DJ JUKEBOX O Select the DJ jukebox USB A USB B 1 A USB port ( ) USB status indicator 2 B Q Display panel Q M A Press [ALBUM/TRACK] to select album or track. Browse track or albums Turn [CONTROL] to browse. To start playback from the selection, press [4/9]. CONTROL R VOLUME ALBUM/TRACK DISPLAY C S Disc tray USB/ CD MANUAL EQ TUNE MODE D.BASS B 1 2 RADIO/AUX DJ JUKEBOX OPEN/CLOSE G B Decrease the volume and connect the USB device to the USB port. Hold the main unit when connecting or disconnecting the USB device. Press [USB/CD] to select “USB A” or “USB B”. Note: Do not use a USB extension cable. The system cannot recognise USB device connected through a cable. A P USB device (not supplied) PAIRING PRESET EQ O R Select MP3 album or track I S Bluetooth® 3 Press [ ]. “BLUETOOTH READY” is shown. Select “SC-AKX18” from the Bluetooth® menu of the device. The name of the connected device is shown for a few seconds. Start playback on the device. Note: • A device must be paired to connect. • The system can only connect to one device at a time. • When “BLUETOOTH” is selected as the source, this system will automatically try to connect to the last connected device. Press [4/9]. Press [8]. You can connect and play an audio device wirelessly through Bluetooth®. Play one selected track. Press [2/3] or [5/6] to select the track. 1TR USB The position is memorised. “RESUME” is shown. Press again to stop fully. 1-ALBUM 1ALBUM Pause Press [4/9]. Press again to continue playback. RANDOM Skip Press [2/3] or [5/6] to skip track. 1-ALBUM RANDOM CD USB Search 1ALBUM RND Press and hold [2/3] or [5/6]. REPEAT Note: Depending on the Bluetooth® device, some operations may not work. Play one selected MP3 album. Press [R, T] to select the MP3 album. Play all tracks randomly. RND Press [R, T] to skip MP3 album. Play all tracks in one selected MP3 album randomly. Press [R, T] to select the MP3 album. OFF REPEAT Cancel the setting. ON REPEAT Repeat playback. CD USB BLUETOOTH Note: • During random playback, you cannot skip to tracks which have been played. • The setting is cancelled when you open the disc tray. You can view the available information on the display panel. Link mode Viewing available information Press [DISPLAY]. Press [ ]. Album number Press [PLAY MENU] to select “DISCONNECT?”. • This system can play CD-R/RW with CD-DA or MP3 format content. • Before playback, finalise the disc on the device it was recorded on. • Some CD-R/RW cannot be played because of the condition of the recording. Radio Improving the sound quality Preparation Press [RADIO/AUX] to select “FM” or “AM”. Manual tuning 1 2 3 Press [2/3] or [5/6] to tune in to the station. To tune automatically, press and hold the button until the frequency starts changing quickly. “STEREO” is shown when a stereo broadcast is being received. Using the main unit 1 2 When “FM” is selected 1 2 Press [PLAY MENU] to select “TUNE MODE”. Press [R, T] to select “MANUAL” and then press [OK]. Press [TUNE MODE] to select “MANUAL”. Press [2/3] or [5/6] to tune in to the station. Track number Press [R, T] to select “OK? YES” and then press [OK]. “BLUETOOTH READY” is shown. To cancel, select “OK? NO”. BASS –4 to +4 MID Ű Note on MP3 file TREBLE • Files are defined as tracks and folders are defined as albums. • Tracks must have the extension “.mp3” or “.MP3”. • Tracks will not necessarily be played in the order you recorded them. • Some files can fail to work because of the sector size. Using the main unit 1. Press [MANUAL EQ] to select “BASS”, “MID” or “TREBLE”. 2. Press [2/3] or [5/6] to adjust the level. D.BASS MP3 file on disc • This system can access up to: – 255 albums (including root folder) – 999 tracks – 20 sessions • Disc must conform to ISO9660 level 1 or 2 (except for extended formats). MP3 file on USB device • This system can access up to: – 800 albums (including root folder) – 8000 tracks – 999 tracks in one album Setting the clock Press [R, T] to select the setting and then press [OK]. Emphasis on sound quality. Press [R, T] to select “MONO” and then press [OK]. To cancel, select “STEREO”. “MONO” is also cancelled when you change the frequency. This is a 24-hour clock. To memorise the setting Continue with step 4 of “Manual presetting”. Checking the signal status For Australia and New Zealand For others (Except for Bluetooth® source) You can set the timer to come on at a certain time to wake you up. FM ST The FM signal is in stereo. 1 2 FM MONO “MONO” is selected as the “FM MODE”. RDS broadcasting LOWEST Tuning begins from the lowest frequency. CURRENT Tuning begins from the current frequency. Press [DISPLAY]. Press [2/3] or [5/6] to tune in to the station. Press [OK]. Press [R, T] to select a preset number and then press [OK]. Do steps 3 through 5 again to preset more stations. The new station replaces any station that occupies the same preset number. Ű Selecting a preset station 1 2 3 Press [PLAY MENU] to select “TUNE MODE”. Press [R, T] to select “PRESET” and then press [OK]. Press [2/3] or [5/6] to select the preset station. Using the main unit 1 2 Press [TUNE MODE] to select “PRESET”. Press [2/3] or [5/6] to select the preset station. A5 16 Portrait.indd 2 Preparation Set the clock. 1 2 3 4 Except for Australia and New Zealand This system can show the text data transmitted by the radio data system (RDS) available in some areas. Press [R, T] to select “MANUAL” and then press [OK]. Note: Reset the clock regularly to maintain accuracy. Press [PLAY MENU] to select “FM STATUS” and then press [OK]. Ű Automatic presetting Press [PLAY MENU] to select “TUNE MODE”. To check the time Press [SETUP] to select “CLOCK” and the press [OK]. In standby mode, press [DISPLAY]. Play timer You can preset up to 30 FM and 15 AM stations. 1 2 3 4 5 Press [R, T] to set the time and then press [OK]. Press [DISPLAY]. The FM signal is in monaural. The system is not tuned in to a station. Ű Manual presetting Press [SETUP] to select “CLOCK”. When “FM” is selected FM Press [R, T] to select “LOWEST” or “CURRENT” and then press [OK]. The tuner presets all the stations it can receive into the channels in ascending order. To cancel, press [8]. 1 2 PS Programme service PTY Programme type FREQ Frequency Note: RDS may not be available if reception is poor. AM allocation setting By main unit only This system can also receive AM broadcasts allocated in 10 kHz steps. 1 2 Press [RADIO/AUX] to select “AM”. Press and hold [RADIO/AUX]. After a few seconds, the display panel shows the current minimum radio frequency. Release the button when the minimum frequency changes. • To go back to the initial setting, do the above steps again. • Preset frequencies are erased after you change the setting. Press [SETUP] to select “TIMER ADJ”. Press [R, T] to set the start time and then press [OK]. Do step 2 again to set the end time. Note: • The remaining time is always shown on the display. The display changes temporarily when you perform other operations. • The play and sleep timer can be used together. • The sleep timer always comes first. Be sure not to set an overlap of timers. External equipment You can connect a VCR, DVD player etc. and listen to the audio through this system. Preparation • Disconnect the AC mains lead. • Switch off all equipment and read the appropriate operating instructions. Press [R, T] to select the source you want to play and then press [OK]. DVD player (not supplied) To start the timer 1 2 Press [R, T] to select the setting (in minutes) and then press [OK]. To cancel, select “OFF”. Rear panel of this main unit Press [SETUP] to select “TIMER SET”. To check the setting Press [SETUP] to select “TIMER ADJ” and then press [OK]. In standby mode, press [DISPLAY] two times. Note: • The timer starts at a low volume and increases gradually to the preset level. • The timer comes on at the set time every day if the timer is on. • If you switch off the system and then switch on again while the timer is in operation, the timer will not stop at the end time. Auto off This system automatically switches off when you do not use it for approximately 20 minutes. 1 2 Press [SETUP] to select “AUTO OFF”. Press [R, T] to select “ON” and then press [OK]. “A.OFF” is shown. To cancel, select “OFF”. Note: This function does not work when you are in radio source or when a Bluetooth® device is connected. Bluetooth® standby This function automatically switches on the system when you establish a Bluetooth® connection from a paired device. 1 2 Press [SETUP] to select “BLUETOOTH STANDBY”. Press [R, T] to select “ON” and then press [OK]. To cancel, select “OFF”. Software version You can check the software version of the system. 1 2 Press [R, T] to select “SET” and then press [OK]. “#” is shown. To cancel, select “OFF”. The system must be switched off for the timer to operate. Press [SETUP] to select “SW VER.” and then press [OK]. The software version is shown. Press [OK] again to exit. Troubleshooting Connect the external equipment. Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated do not solve the problem, consult your dealer for instructions. Press [RADIO/AUX] to select “AUX”. Ű Common problems Audio cable (not supplied) 1 2 3 Play the external equipment. To adjust the input level 1 2 Press [SOUND] to select “INPUT LEVEL”. Press [R, T] to select “NORMAL” or “HIGH” and then press [OK]. Note: • The default setting is “NORMAL”. • Select “NORMAL” if the sound is distorted during “HIGH” input level. • Components and cables are sold separately. • If you want to connect equipment other than those described, refer to the audio dealer. • Sound distortion can occur when you use an adaptor. DJ jukebox USB You can use DJ jukebox to add cross-fading effect between songs. You can also use additional features with the “Panasonic MAX Juke” app (Z see below). Press [PLAY MENU] to select “JUKEBOX” and then press [R, T] to select the setting. Or press [DJ JUKEBOX] on the main unit to select the setting. Continue with step 3. Cancel cross-fading. ON CROSS FADE Add cross-fading. OFF Switch off DJ jukebox. Press [OK]. Press [PLAY MENU] to select “PLAYMODE”. Press [R, T] to select the setting and then press [OK]. RANDOM REPEAT Play all tracks randomly and repeat all tracks. RND ALL TITLE REPEAT Repeat all tracks. Using the “Panasonic MAX Juke” app You can download and install the free Android™ app “Panasonic MAX Juke” on Google Play™ for additional features, such as to request song playback from multiple devices simultaneously. Others Press [SETUP] to select “SLEEP”. “ON SURROUND” or “OFF SURROUND” Note: The default setting is underlined. Changed settings will be kept until it is changed again, unless otherwise indicated. Note: • The default setting is “MODE 2”. • Select “MODE 1” if the sound is interrupted. Note: A device is disconnected when you: • Select a different source. • Move the device out of the maximum range. • Disable the Bluetooth® transmission of the device. • Switch off the system or the device. 1 2 SURROUND 2 3 4 Press [PLAY MENU] to select “LINK MODE”. MODE 2 “ON D.BASS” or “OFF D.BASS” Using the main unit Press [D.BASS]. OFF CROSS FADE Press and hold [ –PAIRING] until “PAIRING” is shown. Sleep timer Using the main unit Press [LOCAL PRESET EQ]. Preparation If this system is connected to a Bluetooth® device, disconnect it (Z“Disconnecting a device”). Emphasis on connectivity. Select the desired preset EQ setting. • This system supports USB 2.0 full speed. • This system can support USB devices of up to 32 GB. • Only FAT 12/16/32 file system is supported. 1 MODE 1 Press [R, T] to select the setting and then press [OK]. PRESET EQ You can change the link mode to suit the connection type. 1 2 Press [SOUND] to select the sound effect. Note: DJ jukebox effect is cancelled when you switch off the system or change to another source. The sleep timer switches off the system after the set time. Press [PLAY MENU] to select “FM MODE”. Memory presetting Press [PLAY MENU] to select “A.PRESET”. Clock and timers 1 2 Ű Note on USB device Using the main unit Preparation • Switch on the Bluetooth® feature of the device and put the device near the system. • Read the operating instructions of the device for details. Sound effects BLUETOOTH Note: • Maximum characters that can be shown: CD USB : approximately 32 BLUETOOTH : approximately 16 • This system supports ver. 1.0 and 1.1 ID3 tags. • Text data that the system does not support can show differently. • Example: MP3 album and track number display. Ű Disconnecting a device 1 2 3 1-TRACK e .b Ű Connecting a device Distance: Within approximately 7 m Angle: Approximately 20° up and down, 30° left and right P Note: You can pair up to 8 devices with this system. If a 9th device is paired, the device that has not been used for the longest time will be replaced. Cancel the setting. rre L Select the sound effects 3 Stop OFF PLAYMODE o nb To cancel, press the button again. “MUTE” is also cancelled when you adjust the volume or when you switch off the system. CD USB BLUETOOTH de E J Mute the sound PLAYMODE an J Select “SC-AKX18” from the Bluetooth® menu of the device. If prompted for a passkey, input “0000”. The device connects with this system automatically after pairing is complete. The name of the connected device is shown for a few seconds. Basic playback Play Press [R, T] to select the setting and then press [OK]. .v D I Adjust the volume level Press [R, T] to select “OK? YES” and then press [OK]. “PAIRING” is shown. To cancel, select “OK? NO”. 2 Press [PLAY MENU] to select “PLAYMODE” or “REPEAT”. w w I Press [PLAY MENU] to select “PAIRING”. Or press and hold [ –PAIRING] on the main unit until “PAIRING” is shown. Continue with step 4. 1 w G Open or close the disc tray Press [ ]. If “PAIRING” is shown, continue with step 4. CD USB m F Select or confirm the option C N 2 3 E View the content information E C 1 The following marks indicate the availability of the feature. CD : CD-R/RW in CD-DA format or with MP3 files. USB : USB device with MP3 files. BLUETOOTH : Bluetooth® device. Ű Note on disc Play menu fro B Disc Preparation If this system is connected to a Bluetooth® device, disconnect it (Z“Disconnecting a device”). Media playback ed G H Ű Pairing a device ad A On the main unit: To start Bluetooth® pairing, press and hold [ –PAIRING] when you are in Bluetooth® source. Preparing the media o nl ow Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. D A Standby/on switch [`], [1] Overview of controls The unit does not work. • The safety device has been activated. Do the following: 1. Press [1] on the main unit to switch the unit to standby mode. If the unit does not switch to standby mode, – Press and hold the button for a minimum of 10 seconds. Or, – Disconnect the AC mains lead and connect it again. 2. Press [1] again to switch on the unit. If the problem persists, consult your dealer. The display panel lights up and changes continuously in standby mode. • Press and hold [8] on the main unit to select “DEMO OFF”. No operations can be done with the remote control. • Examine that the battery is installed correctly. Sound is distorted or no sound. • Adjust the volume of the system. • Switch off the system, determine and correct the cause, then switch on again. It can be caused by straining of the speakers through excessive volume or power, and when using the system in a hot environment. A humming sound can be heard during playback. • An AC mains lead or fluorescent light is near the cables. Keep other appliances and cords away from the cables of this system. The sound level reduces. • The protection circuit has been activated due to the continuous use at high volume output. This is to protect the system and maintain the sound quality. Ű Radio Sound is distorted. • Use an optional FM outdoor antenna. The antenna should be installed by a competent technician. A beat sound is heard. • Switch off the TV or move it away from the system. • Move mobile telephones away from the system if the interference is apparent. A low hum is heard during AM broadcasts. • Move the antenna away from other cables and cords. Ű Main unit displays Ű Disc “ADJUST CLOCK” Display not shown correctly. Playback does not start. “ADJUST TIMER” • • • • You have not put in the disc correctly. Put it in correctly. Disc is dirty. Clean the disc. Replace the disc if it is scratched, warped, or non-standard. There is condensation. Let the system dry for 1 to 2 hours. • The clock is not set. Adjust the clock. • The play timer is not set. Adjust the play timer. “AUTO OFF” • The system has not been used for 20 minutes and will switch off within a minute. To cancel, press any button. The total number of tracks displayed is incorrect. The disc cannot be read. Distorted sound is heard. “ERROR” • You put in a disc that the system cannot play. Change to a playable disc. • You put in a disc that has not been finalised. “F61” Ű USB The USB device or the contents in it cannot be read. • The format of the USB device or the contents in it are not compatible with the system. • USB devices with storage capacity of more than 32 GB cannot work in some conditions. Slow operation of the USB device. • An incorrect operation was done. Read the instructions and try again. • Examine and correct the speaker cords connection. • Disconnect the USB device. Switch off the system and then switch on again. • Examine the Bluetooth® connection. • Disconnect the Bluetooth® device. Switch off the system and then switch on again. • There is a problem with the power supply. • Disconnect the AC mains lead and consult your dealer. Ű Bluetooth® “NODEVICE” Pairing cannot be done. “NO DISC” • The USB device is not connected. Examine the connection. • You have not put in a disc. “NO PLAY” “UNSUPPORT” • Examine the content. You can only play supported format. • The files in the USB device can be corrupted. Format the USB device and try again. • The system may have a problem. Switch off the system and then switch on again. The device is connected but audio cannot be heard through the system. “NO TRACK” • For some built-in Bluetooth® devices, you have to set the audio output to “SC-AKX18” manually. Read the operating instructions of the device for details. “PLAYERROR” • The device is out of the 10 m communication range. Move the device nearer to the system. • Remove any obstacle between the system and the device. • Other devices that use the 2.4 GHz frequency band (wireless router, microwaves, cordless phones, etc.) are interfering. Move the device nearer to the system and distance it from the other devices. • Select “MODE 1” for stable communication. • The USB device is using too much power. Disconnect the USB device, switch off the system and then switch on again. “VBR–” • The system cannot show the remaining play time for variable bit rate (VBR) tracks. Remote control code When other Panasonic equipment responds to the remote control of this system, change the remote control code for this system. Preparation Press [USB/CD] to select “CD”. Ű To set the code to “REMOTE 2” 1 2 Press and hold [USB/CD] on the main unit and [RADIO/AUX] on the remote control until “REMOTE 2” is shown. Press and hold [OK] and [USB/CD] for a minimum of 4 seconds. Ű To set the code to “REMOTE 1” 1 2 Press and hold [USB/CD] on the main unit and [USB/CD] on the remote control until “REMOTE 1” is shown. Press and hold [OK] and [ ] for a minimum of 4 seconds. • Disconnect the AC mains lead and consult your dealer. • The pairing of the device was unsuccessful. Do pairing again. • The pairing of the device has been replaced. Do pairing again. • This system might be connected to a different device. Disconnect the other device and try pairing the device again. Sound from the device is interrupted. “USB OVER CURRENT ERROR” “F76” “F77” The device cannot be connected. • The temperature protection circuit has been activated, and the system will switch off. Let the unit cool down before switching it on again. • Check that the ventilation opening of the unit is not obstructed. • Ensure this unit is well ventilated. “F70” • Large content size or large memory USB device takes longer time to read. • Check the Bluetooth® device condition. • The device is out of the 10 m communication range. Move the device nearer to the system. “TEMP NG” • There is no album or track in the USB device. System memory reset Reset the memory when the following situations occur: • There is no response when buttons are pressed. • You want to clear and reset the memory contents. 1 2 3 Disconnect the AC mains lead. While you press and hold [1] on the main unit, connect the AC mains lead again. Continue to press and hold the button until “– – – – – – – –” is shown. Release [1]. All the settings are set back to the factory preset. It is necessary to set the memory items again. • You played an unsupported MP3 file. The system will skip that track and play the next one. “REMOTE 1” “REMOTE 2” • The remote control and the main unit are using different codes. Change the code of the remote control. – When “REMOTE 1” is shown, press and hold [OK] and [ ] for a minimum of 4 seconds. – When “REMOTE 2” is shown, press and hold [OK] and [USB/CD] for a minimum of 4 seconds. 17/04/2014 4:58:11 PM
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project