Atlantis Land I-FLY A02-WR-54G Quick Start Guide

I-Fly Wireless Broadband Router with 4 Fast Ethernet ports + 1 Wan port

Quick Start Guide

A02-W R-54G/G2 (November 2003)V1.00

I-Fly Wireless Broadband Router

For more detailed instructions on configuring and using the I-

Storm Lan Router ADSL, please refer to the online manual.

1.1 Package contents

Make sure that you have the following items:

•

I-Fly Wireless Broadband Router

•

Network cable (CAT 5)

•

Power Adapter AC-DC (5V, 2A)

•

CD-ROM (with manual, software and driver)

•

This Quick Start Guide

If any of the above items are missing, please contact your reseller.

1.2 Cabling

Connect to RJ45 ports by an Ethernet cable your PCs or Switch.

Finally connect the Adapter to power inlet. Now the I-Fly Router will enter a self-test phase for about ten seconds. After this phase the STATUS led will be flashed to indicate that router is in normal operation. Now you should see the LAN (WLAN/WAN) is solid or blinking. A solid light (POWER Led) indicates a proper connection to the power supply.

2

I-Fly Wireless Broadband Router

1.3 The Front Panel LEDs

LED

POWER

MEANING

ON=Indicates proper connection to power supply.

OFF= The unit is not receiving power

STATUS BLINKING=Indicates that the device is ready .

WAN

WLAN

LAN

ON= Indicates connection to the WAN port

BLINKING= Data transmission.

ON= Link is established

BLINKING= Packet transmit or receive activity

OFF= No Link activity

ON= Indicates connection is established.

BLINKING= Data transmissions

OFF= No LAN connections

3

1.4 The Rear Ports

I-Fly Wireless Broadband Router

LAN

(4 *RJ-45)

WAN

PORT

RESET

MEANING

Auto MDI/MDIX LAN ports automatically sense the cable type when connecting to

Ethernet -enabled computers.

The Auto MDI/MDIX WAN port is the connection for the Ethernet cable to the Cable or DSL modem

After the device has turned on, press it (10s) to reset the device or restore to factory default settings.

Receptor for the Power Adapter

POWER (Jack)

1.5 Default Settings

Before you configure this I-Fly Wireless Broadband Router, you need to know the following default settings.

Leaving these settings, configuring the PCs such as DHCP client

(follow the instructions below) . You can configure the I-Fly

Router quickly. For a more detailed configuration refer to manual on Installation CD.

4

I-Fly Wireless Broadband Router

Below the I-Fly default settings:

•

User Name:admin

•

Password:admin

•

IP Address (192.168.1.1)

•

Subnet Mask (255.255.255.0)

•

DHCP Server active

1.6 IE Configuration

Now open IE, go to Instruments menu, select the Connections tab and select one of the following options:

•

Never use remote connection

•

Use remote connection if another network connection isn’t available

5

I-Fly Wireless Broadband Router

1.7 TCP/IP Configuration

Configuring PC (Windows 95/98/ME)

1. Go to Start / Settings / Control Panel. In the Control

Panel, double-click on Network and choose the

Configuration tab.

2. Select TCP / IP -> NE2000 Compatible, or the name of any Network Interface Card (NIC) in your PC.

3. Click Properties .

4. Select the IP Address tab. In this page, click the Obtain

an IP address automatically radio button.

5. Then select the DNS Configuration tab.

6. Select the Disable DNS radio button and click “OK” to finish the configuration.

Configuring (PC in WindowsXP)

1. Go to Start / Control Panel (in Classic View). In the

Control Panel, double-click on Network Connections.

2. Double-click Local Area Connection.

3. In the LAN Area Connection Status window, click

Properties.

4. Select Internet Protocol (TCP/IP) and click Properties .

5. Select the Obtain an IP address automatically and the

Obtain DNS server address automatically radio buttons. Click OK to finish the configuration.

6

I-Fly Wireless Broadband Router

1.6 Browser configuration

Open the web browser, enter the local port IP address of this

I-Fly Router, which default at 192.168.1.1, and click “Go” to get the login page.

The default username is admin, password admin and click

“OK” to continue.

1.9 Quick Setup with Wizard

Setup wizard is provided as the part of the web configuration utility. You can simply follow the step-by-step process to get your wireless router configuration ready to run in 6 easy steps by clicking on the “Wizard” button on the function menu. The following screen will appear. Please click “Next” to continue.

7

I-Fly Wireless Broadband Router

Step 1: Set your new Password

You can change the password as you like and then click

“Next” to continue.

8

I-Fly Wireless Broadband Router

Step2: Choose your time zone

Select your time zone from the drop down list. Please click

“Next” to continue.

Step 3: Set LAN connection and DHCP server

Set your IP address and mask. The default IP is 192.168.1.1.

If you like to enable DHCP, please click “Enabled”. DHCP enabled is able to automatically assign IP addresses. Please assign the range of IP addresses in the fields of “Range start” and “Range end”. Please click “Next” to continue.

9

I-Fly Wireless Broadband Router

Step 4: Set Internet connection

Select how the router will set up the Internet connection:

Obtained IP automatically; Fixed IP address; PPPoE to obtain

IP automatically; PPPoE with a fixed IP address; PPTP.

Obtain IP automatically (DHCP client):

If you have enabled DHCP server, choose "Obtain IP

automatically (DHCP client)" to have the router assign IP addresses automatically.

Fixed IP Address:

If Fixed IP address is assigned, the below screen will pop up.

Please set the WAN address and DNS server.

10

I-Fly Wireless Broadband Router

PPPoE to obtain IP automatically or PPPoE with a fixed IP

address

Enter in the username, password (and IP address) provided to you by your ISP.

PPTP:

Enter IP adresses and password.

11

I-Fly Wireless Broadband Router

Step 5: Set Wireless LAN connection

Click “enable” to enable wireless LAN. If you enable the wireless LAN, type the SSID in the text box and select a communications channel. The SSID and channel must be the same as wireless devices attempting communication to the router.

Step 6: Restart

The Setup wizard is now completed. The new settings will be effective after the Wireless router restarted. Please click

“Restart” to reboot the router. If you do not want to make any changes, please click “exit” to quit without any changes. You also can go back to modify the setting by clicking “ Back” .

12

I-Fly Wireless Broadband Router

1.10 Test Internet Connection

Then relaunch your Web browser, to link to your favorite Web site to test your Internet connection.

For additional settings or information, refer to the Manual located on the CD.

13