commercial av resource guide
2017/18
COMMERCIAL AV
RESOURCE GUIDE
TABLE OF CONTENTS
THE STAUB DIFFERENCE
4-9
CONTROL12-17
MEDIA DISTRIBUTION
18-25
VIDEO WALL & MULTI -VIEWERS26-27
SYSTEM MANAGEMENT
WELCOME
Welcome to Staub Electronics and our Commercial AV Resource
Guide. For many of you this will be your first introduction to our
company, our team and our brands. Although we have been distributing technology products in Canada for over 35 years, 2017 marks
our entry into the exciting world of Commercial Audio Video!
I describe Staub as a progressive and innovative technology distributor with a simple plan. We have filled our team with passionate AV
professionals, we’ve invested heavily in world-class technology, we
only partner with leading or emerging brands – and we do it all with
the goal of being your number one supplier.
We back this plan up with the Staub Difference, our daily commitment to ensuring we deliver on the things that matter to you most:
NETWORKING30-31
We believe in seamless service which means we want every interaction you have with us to be easy. We do this by building our systems,
processes and policies with you in mind first, and we push our team
to find a way to say “yes” when you need something. We make
ordering, technical support and returns as easy as possible - because
it shouldn’t be difficult - and we are obsessive about operational excellence, measuring our performance daily to ensure your experience
with us is the best it can be.
My team and I are passionate about helping technology integrators succeed and we look forward to introducing you to the Staub
Difference. We would be thrilled to show you firsthand why so many
integrators across the country have selected Staub as their AV supplier of choice.
» We provide you with an easy, best-in-class website for placing
orders online
» All orders placed before 5pm are shipped the same day
» We offer some of the lowest prepaid delivery options in the
industry
28-29
Scott Trotter
President
AUDIO32-37
OUTDOOR TV
38-39
MOUNTS40-41
PROJECTORS42
SCREENS43
LIGHTING & SHADES
44-47
SURVEILLANCE48-51
CELLULAR SIGNAL
52-53
RACK PRODUCTS
54
POWER & PROTECTION
55
WIRE & CABLE
56-57
CORPORATE DIRECTORY
58
BUSINESS DEVELOPMENT TEAM
59
» Our technical team provides live, first level support for all of the
brands we carry
» And we take the risk out of buying with our 60 day no hassle
return policy
ONLINE
ORDERING
WWW.STAUB.CA/CAV
SAMEDAY
SHIPPING
PREPAID
DELIVERY
LIVE TECHNICAL
SUPPORT
NO HASSLE
RETURNS
3
ONLINE ORDERING
THE STAUB TEAM
ORDERING MADE EASY.
We make business easier with Staub.ca. Fully e-commerce enabled and ready to take your order,
Staub.ca is home to over 3,500 products from industry leading manufacturers. Get detailed informa-
The Staub Electronics team is comprised of an energetic and diverse group of individuals dedicated to the pursuit of customer service
tion on all of the products we carry, access our latest pricing, check real-time stock availability, order
excellence. Our knowledgeable product and support experts are experienced in both the sale and installation of AV products, which means
online, track shipments, create multiple project lists and much more!
we speak your language and can answer your questions.
Call us at (888) 470.2211 and we’ll help you make the right choice for your next project.
MANAGEMENT TEAM
Will Woo
Bryan Sack
Senior Director of
Merchandise & Operations
Director of Sales &
Business Development
Keith McCrea
Mani Purewal
Colin Moskaluke
National Sales Manager
Commercial AV
Client Services Manager
Warranty & Technical
Support Manager
“
When it comes to online ordering, Staub.ca is an
industry leader. Over 50% of our dealers use the
site to place their orders and manage their day-today business with us. Client feedback has allowed
us to improve on the site and add new features
such as real-time inventory levels as well as next
ETA for product that may be out of stock. The result has been a seamless and easy website experience that our customers rave about.
MANI PUREWAL
CLIENT SERVICES MANAGER
WWW.STAUB.CA/CAV
5
SAMEDAY SHIPPING
PREPAID DELIVERY
ORDER TODAY. GET IT TOMORROW.
THE FREIGHT IS ON US.
All orders are considered a priority at Staub. Meet demanding deadlines with our sameday shipping
With some of the lowest prepaid delivery options in the industry, we make freight charges a thing
guarantee. Orders placed before 5:00pm PST, or express orders placed before 2:00pm PST, will be
of the past. We also take away the guesswork. Our online ordering system will let you know if you
shipped the same-day.*
have met your prepaid shipping level or not and how much more till you meet it. To learn more visit
* Conditions apply. Learn more at www.staub.ca/terms.
www.staub.ca/shipping.
“
Shipping and logistics is one of our biggest differentiators, and provides a lot of extra value to
our customers. Our team knows how important
your project timelines are, so we are on-site from
8:00am to 7:00pm to ensure your orders are out
the door and on a truck the same-day. Being able
to place an order late in the day, and receive it the
next day is something we are really proud to offer.
JEREMIAH DARTNELL
“
We work closely with our courier partners and
meet regularly to review delivery performance and
look for ways to improve the customer experience
through new service offerings. We want to offer
solutions that are as unique as your business. Prepaid shipping is just another example of how we
help our customers succeed.
WILLIAM WOO
SENIOR DIRECTOR OF MERCHANDISE & OPERATIONS
WAREHOUSE MANAGER
WWW.STAUB.CA/CAV
7
“
NO HASSLE RETURNS
As your first level of support for all the brands we
carry, our team is constantly testing and validating
the solutions we offer to confirm they perform as
intended. Our technical team also embraces new
and emerging technologies as a way to stay on the
leading edge of what our industry has to contend with. We love the challenge that comes with
learning and understanding the intricacies of our
products, and are very proud to be able to support
them from a technical perspective. Pushing technology to, and well past its limits creates a better
understanding of its full functionality. This helps
ensure that we can troubleshoot and rectify any
issues that may arise during your projects so you
can complete them on-time and on-budget.
WE STAND BEHIND WHAT WE SELL.
Did you purchase something you wish you hadn’t? Purchased too much? No problem! All products
purchased from Staub can be returned within 60 days for a full credit.*
* Conditions apply. Learn more at www.staub.ca/terms.
PAUL KAISER
AV SUPPORT SPECIALIST & WARRANTY
LIVE TECHNICAL SUPPORT
TALK TO OUR EXPERTS.
Have a technical question? We’re here to help! Our in-house support team is comprised of certified
AV technicians with over 90 years of combined experience with the role of helping you overcome
challenges so that projects roll-out smoothly and meet your client’s expectations. Available from
Monday to Friday, 8:00am to 5:00pm PST, our technicians will work to ensure your questions are
answered and your customers are satisfied.
“
Our warranty and return policy is simple, effective
and timely. With 60 days to return purchases and
an easy-to-use online RMA process, we strive to
process your returns as quickly as possible. Plus,
we offer advanced exchange warranty on all our
products in order to minimize downtime and
streamline the replacement process. Having spent
years working as a technology integrator, I know
first-hand how disruptive a defective part can be,
and our goal is to help get your customer’s system
back working as quickly as possible.
COLIN MOSKALUKE
TECHNICAL SERVICES MANAGER
WWW.STAUB.CA/CAV
9
PRODUCT GUIDE
WWW.STAUB.CA/CAV
11
View 3rd party IP cameras on URC interfaces such as Luma Surveillance cameras. Display live,
full-motion video with the touchscreen/remote of your choice!
CONTROL
URC 7” GRAPHICAL TABLETOP COLOR TOUCHSCREEN
SKU: TDC-7100
This tabletop touchscreen controller with 7” high-resolution color LCD features a sleek, premium
design with integrated charging base. The next-generation user interface provides primary control for up to 32 rooms - entertainment, cameras, door locks, motorized shades, thermostats and
more. The TDC-7100 delivers two-way control of Total Control and compatible third-party products for the ultimate experience. Features A/V intercom function with TKP-7600, displays room
status and enables room selection and turns off individual rooms or the whole facility with one
touch. Plus, the controller connects to the Wi-Fi network when lifted and preserves the battery
charge. Customized control includes favorite channels, shortcuts and other custom menus.
URC 7” GRAPHICAL IN - WALL COLOR TOUCHSCREEN
URC ADVANCED NETWORK SYSTEM
CONTROLLER W/2- WAY COMMUNICATION
URC ADVANCED NETWORK SYSTEM
CONTROLLER W/2- WAY COMMUNICATION
SKU: TKP -7600
SKU: MRX-8
SKU: MRX-10
The TKP-7600 In-Wall Touchscreen provides next generation, primary control of entertainment and smart products. It features a brilliant seven inch color touchscreen, built-in camera, microphone and new audio/video intercom - perfect for door
station integration. The sleek, premium design appeals to discerning designers and architects alike. In addition to elegant
control for lighting, security, surveillance cameras, thermostats, motorized shades and more, the TKP-7600 delivers entertainment control with guide-based favorite channels, plus faster than ever speed, enhanced graphics and sensor-based wakeup
function. It is designed to mount in portrait or landscape orientation.
The MRX-8 controller is the ideal way to make the
move to adding simple yet powerful automation to your
project. Small in size but big on value, this piece can
sit in any room or central equipment rack and deliver
robust control of all your entertainment, lights, security,
door locks, temperature and more. Ideal for small
offices and the like, this robust central control center
stores and issues automation commands for all of your
components throughout the office over your network.
The system allows you to easily add on other products
including URC LED or Vivido wireless lighting, streaming music players, intelligent thermostats and more, as
your customers’ needs change.
The MRX-10 is the Total Control solution for any
commercial application. For installs where multiple
control protocols need addressing, the MRX-10 issues
commands to all IP, IR, RS-232, relay and sensor controlled devices throughout the entire system. A two-way
RF transceiver offers communication with current
and future Total Control remotes, and control over
IP is possible via a network connection for all other
Universal Remote Controls and keypads. The MRX-10
routes macro steps via IR, RS-232, relays and sensors
to up to 8 sub-base stations on a network, perfect for
the hospitality industry where control over inaccessible
locations is always a necessity. Programmable via the
internet for convenient off premises configuration. URC
Mobile App for iOS and Android now included with all
MRX Advanced Controllers.
URC IN - WALL COLOR TOUCHSCREEN CONTROLLER
SKU: TKP -5600
The TKP-5600 In-Wall Color Touchscreen provides highly responsive, elegant control of all Total Control systems like music,
TV and video, lights, thermostats, security systems and more. Featuring a new audio/video intercom, it provides two-way
feedback with all Total Control and compatible third-party devices. The TKP-5600 is designed to always be on and ready
for use. It fits securely in a standard single-gang wall box, either horizontally or vertically, to provide a dedicated screen for
control in any area. Enjoy brilliant visual feedback for music, TV, and more. The TKP-5600 delivers nothing short of instant
gratification. Bearing the latest and greatest in touchscreen technology, the screen reacts faster-than-ever to select and
control lighting, music, weather and much more for full control of everything.
Also available: MRX-2 (Two-Way Network Base Station)
URC 2- WAY STREAMING NETWORK PLAYER
SKU: SNP -2
The SNP-2 streaming network player merges all music
sources into one simple solution with a graphical menu
so you can pick and control music from anywhere.
The SNP-2 provides instant access to streaming music
services such as SiriusXM and Pandora, Rhapsody,
vTuner and thousands of other internet radio stations
- plus any music collection that’s stored on an attached
NAS drive, PC and/or Apple computer. Windows Media,
iTunes files and Playlists are all supported. Enjoy music
with one touch on a URC remote, keypad, touch screen
or even a smartphone or tablet. The SNP-2 installs best
with URC’s DMS-1200 or DMS-100 amplifiers since
they incorporate superior media streaming capabilities.
Flawless CD quality streams can be routed to various
locations in one system. And, because the SNP-2 also
features one digital audio output and a set of analog
outputs, it can be used as a standalone music source
with other brand systems.
URC IN - WALL NETWORK KEYPAD ( WHITE )
SKU: TKP -100
The TKP-100 keypad installs with your system to serve as a quick access point to assist you in making system adjustments in
stride. In an effort to outfit your facility with one touch automation from anywhere, your installer will recommend the TKP100 for areas where a primary handheld controller is not necessary but system adjustments will be indefinitely. The TKP-100
works by communicating over your network with the required MRX-10 Network System Controller. It’s also the perfect complement for controlling your DMS-1200 amplifier’s volume from multiple locations, or switching music sources on your SNP1. Eye-catching push button LEDs that illuminate from white to orange reflect a selected source or a lighting scene’s status
with Universal Remote Controls two-way feedback technology. Installation is clean and simple since the TKP-100 installs in
a standard single-gang wall box. Interchangeable buttons can be tailored to match your individual system requirements.
URC MOBILE FOR ANDROID AND IOS
URC MOBILE APP FOR IOS AND ANDROID NOW INCLUDED WITH ALL MRX ADVANCED CONTROLLERS!
URC Mobile for iOS and Android lets you use any iDevice or Android device to access all the benefits of your Total Control
system. Control music, video, alarm systems and more in ways already familiar to you. Access the app over your network through
the connected URC controller and swipe, tap and rotate your way between portrait and landscape views for convenient control
of your control solution. Works in conjunction with a Total Control MRX-Series Advanced Network Controller for control of A/V
components and automation devices.
Also available: TKP-100BL and TKP100LA
WWW.STAUB.CA/CAV
* URC products are only available to Authorized Staub URC Total Control Dealers. Please contact your local Staub Representative for more
information or download the application on staub.ca.
13
CONTROL
URC 255 DEVICE IR/RF WAND REMOTE W/COLOR LCD
DISPLAY
SKU: MX-890
Employing the latest in technology and ergonomic design, the MX-890 is
equipped to handle virtually any application. Easily control every Audio and
Video product including lighting. One touch puts you in complete command of
everything. This beauty is strong enough to control the most robust entertainment or theater room, and versatile enough to allow you to select other rooms.
The MX-890 features a brilliant 2-inch color, high-resolution screen that can
be fully personalized to suit the particular products you wish to control with
exciting, custom graphics. When used with one the URC base stations – such as
the MRX-1, MRF-350 or MRF-260 – the MX-890 remote can operate equipment
through walls, or from outside. You don’t have to point or be in the same room
as the music player or screen—you can still control them entirely. And, there’s
no need to purchase batteries. The URC MX-890 sits in an attractive tabletop
charging cradle, and is always ready for action the moment you pick it up.
URC ONE WAY IR/RF HARD BUT TON REMOTE
SKU: MX-780
The MX-780 is a wand style hard button remote control with a color OLED
interface. It provides the reliability you need when controlling your entertainment system. Its gorgeous 1.46” OLED screen gives you a higher contrast
ratio than LCD screens and uses less energy as well, which means you’ll enjoy
more vibrant and deeper color levels, especially in low light settings. URC has
added a host of new color icons with modern sources for your installer to use
when designing the layout and look of your MX-780 remote control. You can
control up to 48 devices located in any room with the MX-780. You can use
your MX-780 to control components via RF on the standard 418 MHz or 433
MHz “I” series frequencies, through walls and cabinet doors without having to
aim or point. The MX-780 uses four (4) AA-size alkaline batteries and employs
a sophisticated built in memory back up to retain your program if unused for
several months.
URC TWO - WAY NETWORK BASE STATION
SKU: MRX-2
The MRX-2 two-way Network Base Station bridges the
digital divide between control of clients’ legacy components and the IP network. Acting as a Total Control
sub-base station, it receives commands from an MRX-10
and reissues them via IR, RS-232, or Relays. Each MRX-2
has the following: one relay, one sensor port, two RS232 ports and 6 IR ports. The advanced connectivity of
the MRX-2 allows it to connect to virtually any device
or component. When used in a Total Control system, it
can expand zones throughout the space by installing
multiple MRX-2 units and control equipment such as
shades and TV lifts using the base station sensors,
relays and RS-232 ports.
URC ADDRESSABLE NARROW BAND RF BASE
STATION
SKU: MRF -260
The MRF-260 base station is an “addressable” base
station. RF addressing gives you the ability to control as
many as 60 identical components throughout a facility.
To enable better range and reliability, the MRF-260 is
equipped with the Narrow Band RF reception (like the
MRF-350), so is only compatible with other Narrow
Band remotes. Base Stations are small boxes that
sit out-of-sight and receive the radio frequency (RF)
commands from the remote and then translate these
signals into commands that your various components
can understand. The benefits include no more pointing,
because RF passes harmlessly through walls, doors
and floors. That means that you can store all of your
equipment behind closed doors. You gain many other
versatile features, including the ability to turn off all
of the TVs with a single button press, for example, or
adjust music volume while outside.
URC UNIVERSAL RF BASE STATION (418MHZ )
SKU: MRF -350
The MRF-350 base station is an “addressable” base
station. RF Addressing gives you the ability to control
as many as 90 identical components throughout a
facility. However, the MRF-350 is equipped with the
Narrow Band RF reception, so is only compatible with
MSC System remotes. The MRF-350 can control up to
six individual components and features a separate,
detached antenna. The benefit of the detached antenna
is that your installer can position it precisely so that
you achieve maximum operating range and minimal (or
no) interference. With the MRF-350 and a compatible
remote you can now have complete control over any
component anywhere in the building.
URC COMPLETE CONTROL COLOR SCREEN IR/RF WAND REMOTE
SKU: MX-990
Outfitted with a brilliant 2.4” color LCD screen, the MX-990 sports a ‘freeform graphics’ feature. This
allows an authorized URC installer to customize the remote’s graphics thanks to the greatest flexibility
in design and layout. Your installer can create time-based actions for the remote to perform, and program how long an action will occur, that you can enable or disable whenever you need to. Plus, there’s
no need for batteries. The MX-990 sits in a handsome tabletop charging cradle that fits well with any
existing décor. The new CCP remote requires a simple setup that accepts all MX-980 files, and works
with the popular, bulletproof Narrow-Band RF. That means that you can freely move around your facility
and select entertainment components in any room and operate devices through walls. No additional
networking gear or service is required with the CCP line, which ensures your system is always up and
running.
WWW.STAUB.CA/CAV
URC COMPLETE CONTROL APP SET- UP CARD FOR IOS/ANDROID
SKU: MX- IOS | MX- ANDROID
Leverage the power of your Apple or Android smartphone or tablet by turning it in to an amazing
touchscreen remote for your URC Complete Control automation system, complete with the Complete
Control interface you may already be used to. The CC Control Mobile App for iOS and Android enables
control of your A/V devices via a Wi-Fi connection right over the local area network (LAN) that is host
to the connected MRX-2 Network Base station from URC. Aided by intuitive interfaces that can easily
flip between portrait and landscape views, you can do everything from setting a DVR and navigating
favorite channels to controlling music and videos while moving around or from outside.
15
CONTROL
THE OPTIMAL AV CONTROL ECOSYSTEM
The Atlona Velocity™ Control System is a new AV control platform for very fast, agile control system configuration and
deployment, from individual meeting rooms up to an entire campus or enterprise. A powerful, centralized resource allows
integrator to easily manage all their AV control clients, from site installations all the way down to an individual room.
Velocity features an innovative cloud and premise-based system architecture with scalability up to 500 room systems or
more, as well as full redundancy capability that prevents AV control downtime in any room. Velocity standard features include
system monitoring, notifications, intuitive and mobile-friendly GUIs, secure communications, analytics, and more.
The Velocity Control System is comprised of three distinct elements that work together as a single, unified platform:
Velocity Control Suite, Velocity Control Gateway, and Velocity Touch Panels
VELOCITY CONTROL SUITE
VELOCITY CONTROL GATEWAY
VELOCITY TOUCH PANELS
A cloud-based service and centralized resource to
create and manage AV control projects by client,
client sites, and specific locations including floors
and rooms.
A software-based control processor that resides
on-site with the AV systems. It is available as a
server appliance, or can be hosted on standard IT
server infrastructure.
Sleek, stylistic touch panels in 5.5” and 8” sizes
with a table mount available. Velocity also offers
easy BYOD integration options for tablets, smartphones, PCs, and more.
WWW.STAUB.CA/CAV
EASY TO USE – Control system configuration is fast and highly
intuitive with the familiar interactions, flow, and visual elements of
a web or mobile application. No programming skills are necessary.
To get started with Velocity, all it takes is a few hours with an online
training / certification session.
BYOD – Atlona offers easy, flexible, and affordable options for
Velocity Touch Panels as well as BYOD integration with tablets,
smartphones, and other devices. There are no complicated licensing
schemes or usage restrictions. The intuitive web-based GUIs are
automatically generated during system configuration.
AGILE – Velocity delivers the agility that enables system deployment in a fraction of the time for traditional control platforms.
This agility also allows integrators to expedite functional or user
interface adjustments during commissioning, and respond promptly
to client requests for system modifications.
MONITORING & ALERTS – The Velocity Control System comes
with continuous system monitoring, as well as real-time event
notifications and alerts. For other control systems, such features are
often available only with an asset management platform requiring
separate purchase, installation, and training.
SCALABLE – A single Velocity Control Gateway appliance can serve
up to 500 IP device connections at once. The gateway can also be
hosted in an IT data center, with licensing available for up to 5,000
connections to serve an enterprise. This expandability is unmatched
by traditional control processors, both in scale and cost.
ANALYTICS – Velocity includes analytics and data reporting capabilities that enable deep insight into which rooms and equipment
are most frequently accessed. This is valuable in helping integrators
and technology managers make informed decisions about when,
where, and how to expand.
REDUNDANCY – Velocity features an IP-based system architecture that allows full redundancy with two gateways in operation,
one serving as the primary and the other as a backup. This keeps AV
control running continuously in all rooms, preventing user frustration
that often leads to meeting, class, or event cancellation.
BUDGET FRIENDLY – The Velocity Control System offers a cost
of ownership far lower than competitive offerings in the AV industry.
Significant savings will be realized in terms of equipment costs, free
online training, fast system configuration, high device control capacity, and more – together with Atlona’s 10 year warranty.
CENTRAL MANAGEMENT – The Velocity Control Suite provides
a unified platform for creating and managing AV control projects
by client, client sites, and specific locations such as rooms. Access is
available anywhere worldwide through a standard web browser. This
is much easier than managing clients and installations separately.
SECURE – Velocity supports secure data communications between
the cloud service, control gateway, AV devices, and web clients
through HTTP/2, HTTPS, and WebSocket with TLS and AES-128 encryption. Additionally, Velocity can operate over an isolated network
with a localized version of the cloud service.
17
MEDIA DISTRIBUTION
ATLONA 4K/UHD 8×4 HDBASET AND HDMI MATRIX SWITCHER
WITH POE
ATLONA 4K/UHD, 8×2 MULTI - FORMAT MATRIX SWITCHER WITH
DUAL, HDBASET
ATLONA SWITCHER FOR HDMI AND VGA INPUTS WITH
HDBASET OUTPUT
ATLONA HDBASET SCALER WITH HDMI AND ANALOG AUDIO
OUTPUTS
SKU: AT- UHD - CLSO -840
SKU: AT- UHD - CLSO -824
SKU: AT- HDVS -200-TX
SKU: AT- HDVS -200- RX
The Atlona AT-UHD-CLSO-840 is a 4K/UHD 8×4 matrix switcher for HDMI and
HDBaseT with eight inputs, four discrete outputs, flexible audio integration
capabilities and Ethernet-enabled 100 meter HDBaseT extension with PoE
remote device powering. It is highly versatile and ideal for presentation environments with content on multiple displays, as well as videoconferencing,
presentation capture, and divisible rooms. The AT-UHD-CLSO-840 supports
resolutions up to 4K/UHD at 60 Hz with 4:2:0 chroma subsampling. Ethernet
pass-through allows HDBaseT Ethernet extension from a control system or
network. Audio system integration is streamlined with audio embedding and
de-embedding, independent audio matrix switching, dedicated input and output gain controls, and a five-band EQ for each output. The AT-UHD-CLSO-840
is configured and managed using Atlona Management System software to
simplify installation and enable remote monitoring and support.
The AT-UHD-CLSO-824 is a 4K/UHD 8×2 matrix switcher with dual, HDBaseT and mirrored HDMI outputs for 4K/UHD @ 60Hz signals. This matrix
switcher has multi-format signal-handling, Ethernet-enabled 100-meter
HDBaseT input/output extension, and advanced audio capabilities. The mix
of inputs supports remote sources at lecterns and conference room tables via
HDBaseT transmission as well as local sources in the equipment rack. The
matrix serves a wide array of room configurations with two HDBaseT video
outputs, each featuring a mirrored HDMI port to provide an additional output
for a local display or an Atlona Extender Kit. The AT-UHD-CLSO-824 offers
three Ethernet-enabled HDBaseT inputs designed to provide system design
flexibility. To increase the number of system inputs, designers can choose the
AT-HDVS-200-TX or AT-HDVS-200-TX-WP HDBaseT transmitter that offers
HDMI and VGA inputs with Ethernet.
The AT-HDVS-200-TX is a 3×1 switcher for HDMI and VGA inputs with HDBaseT output. It features two HDMI inputs, a VGA input, and an always on 3.5mm
audio connector. It can be the central component of a small, automated
AV system. Automatic display control turns on the display automatically
whenever a source is connected. When the source is removed, the display is
turned off. Volume is controlled by using the front panel buttons. Automatic
input selection on the AT-HDVS-200-TX works by sensing the presence of any
video signal. With automatic input selection, manual control systems can be
eliminated. The AT-HDVS-200-TX combines the benefits of a switcher and the
advantages of Ethernet-enabled HDBaseT signal transmission over a single
cable. The switcher enables input selection from the front panel, RS-232, or
TCP/IP commands. HDMI signals up to 4K/UHD @ 60Hz with embedded audio, VGA input signals up to 1920×1200, and control signals can be extended
up to 328 feet (100 meters).
The AT-HDVS-200-RX is an HDBaseT scaler with HDMI and analog audio outputs. It features an HDMI output with balanced analog audio de-embedding
and display control using CEC, IP, or RS-232. The AT-HDVS-200-RX combines
the benefits of an extended-distance HDBaseT receiver with built-in scaling
and the capabilities of a control processor for simplified AV system installation and operation. When used with the AT-HDVS-200-TX switcher, it receives
HDMI signals with embedded audio and control signals at distances up to
328 feet (100 meters). The switcher/scaler pair enables automatic display
control, automatic input selection, volume adjustment, or optional third-party control. The AT-HDVS-200-RX supplies power to the AT-HDVS-200-TX
switcher via Power over Ethernet and together they create a standalone AV
switching and control system with scaling for classrooms and huddle rooms.
ATLONA 6 INPUT SWITCHER AND SCALER WITH HDBASET AND
HDMI OUTPUT
ATLONA 4K/UHD, 6- INPUT MULTI - FORMAT SWITCHER WITH
MIRRORED HDMI AND HDBASET
SKU: AT- UHD - CLSO -612ED
SKU: AT- UHD - CLSO -601
The Atlona AT-UHD-CLSO-612ED is an advanced six-input, multi-format
switcher with 4K scaling, Ethernet-enabled HDBaseT and PoE capabilities.
It simplifies classroom and small office system integration by providing two
HDBaseT inputs, two HDMI inputs, two multi-function analog inputs, plus
mirrored HDBaseT and HDMI outputs. Advanced Automatic System Control
(AASC) features on the switcher provide automatic display control and automatic input selection. Ethernet pass through on the switcher enables control
signal pass-through and Internet distribution. The AT-UHD-CLSO-612ED contains a full RS-232 signal distribution system to route control signals to local
sources and displays. Professional audio features such as a microphone input
with 48-volt phantom power and ducking eliminates additional voice-lift
audio needs. The switcher is configured and managed by Atlona Management
System software to reduce installation time and enable remote support. The
AT-UHD-CLSO-612ED addresses a wide array of AV switching and processing needs often encountered in classrooms, conference rooms, boardrooms,
training rooms and other presentation settings.
The Atlona AT-UHD-CLSO-601 is an advanced six-input, multi-format
switcher with built-in 4K scaling and mirrored HDBaseT and HDMI outputs.
It simplifies classroom and small office system integration by providing four
HDMI and two multifunction analog inputs, to enable the use of both new
and legacy sources with HDMI displays. The AT-UHD-CLSO-601 can be the
central component of an automated AV system. Automatic display control
turns on the display automatically whenever a source is connected. When
the source is removed, the display is turned off. Volume is controlled by using
the front panel buttons. Automatic input selection on the AT-UHD-CLSO-601
works by sensing the presence of any video signal. With automatic input
selection, manual control systems can be eliminated. The AT-UHD-CLSO-601
combines the benefits of a switcher and the advantages of Ethernet enabled
HDBaseT signal transmission over a single cable. The switcher enables input
selection from the front panel, RS-232, or TCP/IP commands. Configuration,
maintenance and updates are performed using Atlona’s WebGUI, AMS IP
management system, or OSD.
ATLONA THREE - INPUT SWITCHER FOR HDMI AND VGA SOURCES WITH HDBASET OUTPUT
ATLONA HDBASET SCALER WITH HDMI AND ANALOG AUDIO
OUTPUTS
SKU: AT- HDVS -150-TX
SKU: AT- HDVS -150- RX
The AT-HDVS-150-TX is a 3×1 Switcher for HDMI and VGA Inputs with HDBaseT Output. It features two HDMI inputs plus a VGA input with 3.5mm audio
connector. The AT-HDVS-150-TX combines the benefits of a switcher with
built-in auto-switching and the advantages of long-distance HDBaseT signal
extension over a single cable. HDMI signals up to 4K/UHD @ 60Hz with embedded audio, VGA input signals up to 1920×1200 video, and control signals
can be extended up to 230 feet (70 meters). The switcher enables auto display on/off, auto-switching, along with other features. The switcher receives
power from the AT-HDVS-150-RX receiver using Power over Ethernet. The
AT-HDVS-150-TX is ideal for long distance transmission and display control
in corporate or educational settings using analog and digital sources.
The Atlona AT-HDVS-150-RX is an HDBaseT scaler receiver for HDMI
transmission over category cable. It receives AV signals up to 1080p/60Hz or
1920×1200 video with embedded audio and control signals at distances up
to 230 feet (70 meters). Features include balanced analog audio de-embedding, RS-232 control, and Power over Ethernet for compatible transmitting
devices. The receiver offers advanced scaling capabilities including image
adjustment capability and an Auto-set feature for matching incoming signals
to the display’s native resolution. Designed for use with the AT-HDVS-150TX transmitter, the transmitter/receiver pair enables auto display on/off,
auto-switching, third-party control, and other features. The built-in HD video
scaler works with matrix switchers to optimize source signals with different
resolutions to a display’s native resolution. The AT-HDVS-RX is ideal for
long distance transmission and display control in corporate or educational
settings using analog and digital sources.
WWW.STAUB.CA/CAV
19
MEDIA DISTRIBUTION
ATLONA 4K/UHD 16×16 HDMI TO HDBASET MATRIX SWITCHER
WITH POE
ATLONA 4K/UHD DUAL- DISTANCE 8×8 HDMI TO HDBASET MATRIX SWITCHER WITH POE
OMNISTREAM DUAL- CHANNEL NETWORKED AV DECODER
OMNISTREAM SINGLE - CHANNEL NETWORKED AV DECODER
SKU: AT- OMNI -122
SKU: AT- OMNI -121
SKU: AT- UHD - PRO3-1616M
SKU: AT- UHD - PRO3-88M
The AT-UHD-PRO3-1616M is a 4K/UHD 16×16 HDMI to HDBaseT Matrix
Switcher with PoE for 4K/UHD @ 60Hz video signals with Power over
Ethernet for receivers and analog audio breakout. The matrix provides both
extended distance, 328 foot (100 meter) and long distance, 230 foot (70
meter) HDBaseT transmission over category cable. It also provides convenient bidirectional extension of both RS-232 and IR Control. Four HDMI
outputs are provided as mirrored outputs designed for routing HDMI-based
audio to an AVR or as additional matrix outputs. The matrix switcher is HDCP
2.2 compliant and supports EDID communication. The matrix is control
system-friendly and integrates with any TCP/IP, RS-232, or IR based control
signals. Designed for multi-zone commercial distribution applications, the ATUHD-PRO3-1616M features a 2U, rack-mountable enclosure with an internal,
international power supply.
The AT-UHD-PRO3-88M is a dual-distance 4K/UHD 8×8 HDMI to HDBaseT
matrix switcher 4K/UHD @ 60Hz video signals with Power over Ethernet for
receivers and analog audio breakout. The matrix switcher features advanced
capabilities for AV signal distribution and a host of integrator-friendly
features. The switcher supports 4K/UHD @ 60 Hz, 4:2:0, 8-bit video signals;
offers 3D pass-through and meets HDCP 2.2 copy protection standards.
Remote power for compatible Atlona UHD-EX Series HDBaseT receivers is
provided using industry standard IEEE 802.3af PoE supplied by the switcher
over HDBaseT links. Professional audio capabilities include analog audio
de-embedding with volume, mute, and 5-band EQ for the first six output
zones on line level, captive screw connectors. The matrix supports digital
audio signals up to 192 kHz/24-bits. Flexible control capability is provided by
the supplied IR remote, front panel control, GUI-based integrated web server
as well as compatibility with TCP/IP, RS-232, or IR based control system.
The Atlona OmniStream 122 is a networked AV decoder with two independent channels of decoding for two OmniStream-encoded video streams up
to 4K/UHD, as well as embedded audio and RS-232 control. OmniStream is
designed for distributing AV over Gigabit Ethernet in enterprises and other
large-scale installations. The OmniStream 122 features SMPTE VC-2 visually
lossless compression with extremely low, sub-frame latency, as well as AES128 encryption and SMPTE 2042 forward error correction. For professional
AV integration, it includes two HDMI outputs, 4K/UHD scaling for each
output with 4:4:4 processing, aspect ratio control, multi-channel PCM audio
downmixing, audio embedding and de-embedding, and more. This dual-channel decoder is housed in a half rack width enclosure and is ideal for
high-density installations. With two Ethernet ports, the OmniStream 122 can
also be integrated with duplicate AV streams delivered over two networks
by the OmniStream 112 dual-channel encoder, for full system redundancy in
mission-critical applications.
The Atlona OmniStream 121 is a networked AV decoder for an OmniStream-encoded video stream up to 4K/UHD, as well as embedded audio and
RS-232 control. OmniStream is designed for distributing AV over Gigabit
Ethernet in enterprises and other large-scale installations. The OmniStream
121 features SMPTE VC-2 visually lossless compression with extremely low,
sub-frame latency, as well as AES-128 encryption and SMPTE 2042 forward
error correction. For professional AV integration, it includes an HDMI output,
4K/UHD scaling with 4:4:4 processing, aspect ratio control, multi-channel
PCM audio downmixing, audio embedding and de-embedding, and more.
This decoder is housed in a half rack width enclosure. The OmniStream 121
can conveniently be powered over the network through Power over Ethernet
(PoE), as well as from local AC power.
ATLONA 4K/UHD DUAL- DISTANCE 6X6 HDMI TO HDBASET MATRIX SWITCHER WITH POE
ATLONA 4K/UHD HDMI OVER 70M HDBASET RECEIVER WITH
CONTROL AND POE
OMNISTREAM DUAL- CHANNEL NETWORKED AV ENCODER
OMNISTREAM SINGLE - CHANNEL NETWORKED AV ENCODER
SKU: AT- OMNI -112
SKU: AT- OMNI -111
SKU: AT- UHD - PRO3-66M
SKU: AT- UHD - EX-70C- RX
The Atlona AT-UHD-PRO3-66M is a dual-distance 6×6 HDMI to HDBaseT matrix switcher for 4K/UHD @ 60Hz video signals with Power over Ethernet for
receivers and analog audio breakout. The matrix provides flexible HDBaseT
routing with both extended distance, 328 foot (100 meter) and long distance,
230 foot (70 meter) transmission over category cable with bidirectional
extension of both RS- 232 and IR Control. Two HDMI outputs are provided
as mirrored outputs designed for routing HDMI-based audio to an AVR or as
additional matrix outputs. The matrix switcher is HDCP 2.2 compliant and
supports EDID communication. The matrix is control system-friendly and
integrates with any TCP/IP, RS-232, or IR based control signals. Designed for
multi-zone commercial distribution applications, the AT-UHD-PRO3-66M
features a 2U, rack-mountable enclosure with internal, international power
supply.
The Atlona AT-UHD-EX-70C-RX is an HDBaseT receiver for AV signals up to
230 feet (70 meters) over category cable with RS-232 and IR control plus
Power over Ethernet capability. It is compatible with video signals up to 4K/
UHD @ 60Hz with embedded multi-channel audio and remote 48V Power
over Ethernet. The receiver works with the PRO3-UHD Matrix Switcher Series
to provide bidirectional extension of both 12 volt IR and RS-232 commands.
The AT-UHD-EX-70C-RX is HDCP 2.2 compliant and supports EDID communication. The receiver features a quarter rack width metal enclosure for easy
installation with rear panel I/O ports for uncluttered wire management. Use
with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.
The Atlona OmniStream 112 is a networked AV encoder with two independent channels of encoding for two HDMI sources up to 4K/UHD, plus embedded audio and RS-232 control. OmniStream is designed for distributing
AV over 1 Gigabit Ethernet in enterprises and other large-scale installations.
The OmniStream 112 features SMPTE VC-2 visually lossless compression
for critical-quality video applications, with extremely low, sub-frame latency
from encode to decode. It also includes selectable AES-128 encryption, and
SMPTE 2042 forward error correction for robust AV distribution spanning
multiple networks. This dual-channel encoder is housed in a half-width rack
enclosure and is ideal for high-density rack installations. The OmniStream
112 can provide networked AV system redundancy in conjunction with an
OmniStream 122 dual-channel AV decoder.
The Atlona OmniStream 111 is a networked AV encoder for one HDMI source
up to 4K/UHD, plus embedded audio and RS-232 control. OmniStream is
designed for distributing AV over Gigabit Ethernet in enterprises and other
large-scale installations. The OmniStream 111 features SMPTE VC-2 visually
lossless compression for critical-quality video applications, with extremely
low, sub-frame latency from encode to decode. It also includes selectable
AES-128 encryption, and SMPTE 2042 forward error correction for robust
AV distribution spanning multiple networks. The OmniStream 111 includes
several features for optimizing integration and enhancing professional
AV presentations. EDID and HDCP management features ensure reliable,
consistent system operation and compatibility with source devices. EDID
management includes the option to assign an EDID captured from a display
at an OmniStream AV decoder. Aspect ratio controls are available to specify
the presentation viewing format as desired by the end user.
WWW.STAUB.CA/CAV
21
MEDIA DISTRIBUTION
BINARY SINGLE FIBER EXTENDER (1000FT ) FOR HDMI WITH BI - DIRECTIONAL IR AND RS232
SKU: B -700- EXT-1K- RS
This HDMI over Fiber extender transmits up to full HD video and 7.1 channels of lossless audio over a single fiber cable - up
to 1000 ft. Plug and play technology allows this product to bypass frustrating EQ settings, and it even includes bi-directional
IR and RS-232 for complete system integration. Plus, the optical fiber offers better install flexibility and resistance to EMI
interference.
BINARY USB 2.0 CAT 5E/6 EXTENDER BALUN KIT 100M (330 FT )
SKU: B -300- USB2- CATX
When you need to extend a USB signal in commercial environments, there is no better way than with a Binary CAT5e/6 balun
kit. Perfect for use with any USB 2.0 devices, these installer-friendly baluns allow you to use plenum rated cable up to 100M
(330 ft) to reliably extend USB signals over UTP cable through conduit and in ceilings. And with their patented USB technology, they are sure to work seamlessly every time.
BINARY 7 PORT USB 3.0 POWERED HUB
SKU: B - USB3- HUB7P
With data transfer rates up to 5Gbps, these professional grade USB 3.0 powered hubs easily support external hard drives,
1080p USB cameras, Smartboards, and more. Plus, with a sleek and durable all-metal chassis, included mounting ears, a
convenient external power supply, and handy lockable connectors, these hubs are everything you want from USB technology
and are the perfect centerpiece for a Unified Communication system.
AVENVIEW 4K HDMI 2.0 EXTENDER SET OVER SINGLE SC FIBER OPTIC
CABLE - UP TO 20KM
AVENVIEW 5.8 GHZ HDMI WIRELESS “THROUGH WALL” EXTENDER SET
PAIRING UP TO 3 RECEIVERS UP TO 50M
SKU: FO - HDM - IP4K- SET
SKU: W- HD3DIR-50M - SET
The FO-HDM-IP4K-SET, HDMI extender set is designed to provide a long haul video
signal transmission over fiber optic cable at furthest possible distances. Avenview’s
FO-HDM-IP4K-SET delivers an amazing pixel to pixel transmission of 4K or 1080p
HDMI signal up to 20 kilometers. With this extender users overcome the length
restrictions of standard HDMI cables with IR Support. The Sender and Receiver units
can extend 20000 meters (20 km) over a Fiber Optic cord point to point. The Sender
can be connected to a Gigabit switch to establish an IP address therefore sending
1080p/4K video signals to multiple Receivers connected to the Gigabit switch and
the HDMI displays. (Network switch with fiber optic ports required). Multiple Senders
can be connected to a Managed Gigabit switch with vlAN/IGMp support therefore
sending 1080p/4K video signals to Receivers connected to the Gigabit switch to
show different sources on multiple displays.
The W-HD3DIR, wireless HDMI extender set runs at 5GHz operation frequency to
deliver HD video/audio 50 meters in an open field. This HD wireless device kit make
wireless connection by using WHDI Technology from HD media Source Devices such
as Cable box, Bluray player, media box, PC or Game Console to any TV display or
monitor as LCD/Plasma/LED TV or projector. Providing outstanding and consistent
picture quality equivalent to wired HDMI cable, with low latency, multi-room connection and low power consumption. Supports HDMI, EDID 1.1, Support HDCP 2.0;
resolution up to 1080p/60Hz and 3D and AES 128 image encryption.
Also available: B-USB3-HUB4P
BINARY HDBASET 4K EXTENDER (330 FT ), BI - DIRECTIONAL IR, RS232, ETHERNET AND POC, RX WALL
PLATE
SKU: B -540- EXT-330- RS - IPW
This 540 series HDBaseT extender transmits video up to [email protected] 60Hz, 7.1 channels of lossless audio, and more over a single
Cat 5e/6 cable. It’s compatible with HDMI 2.0 and HDCP 2.2, plus, support for 100Mb Ethernet makes streaming Netflix or
Pandora on any smart TVs easier than ever. It’s also configured for robust control system integration, featuring Ethernet, IP,
Power over Cable, bi-directional IR and RS-232. Note: The receiver is an in-wall version and fits in dual-gang wall plate. The
extender supports 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0).
BINARY 520 SERIES CONFERENCE ROOM HDMI & VGA EXTENDER + SCALER - 330 FT
SKU: B -520- EXT-330- HV
This Binary Single Cat-5 extender proves that one extender really can meet all your needs. With just one cat-5/5e/6 cable,
send either HDMI or VGA with Stereo Audio signals over distances up to 330ft (100 m). As a bonus, this extender supports
bi-directional IR, RS-232 and IP over a single category cable. You can even use the dip switch setting to set the priority of
HDMI or VGA based on the Conference room applications.
WWW.STAUB.CA/CAV
23
MEDIA DISTRIBUTION
PVI VECODER PRO 8 HD 8 CHANNEL RACK MOUNT HD IPTV ENCODER
SKU: VECODER- PRO8- IP
ZEEVEE HD BRIDGE 2000 SERIES 4 CH HD DIGITAL MPEG2 ENCODER/QAM MODULATOR
ZEEVEE HDBRIDGE 3000 CHASSIS SYSTEM, CABLES NOT
INCLUDED
SKU: HDB2640
SKU: HDB3KR
The ZeeVee HDBridge 2640 4-Ch 1080p Encoder and Modulator converts
four Component or VGA sources into cable channels and broadcasts them
over existing coax cabling to an unlimited number of tuner-equipped
displays. The 2640 features four full-sized DIN inputs and includes four 3 ft
DIN to multi-RCA breakout cables that enable connecting Component video,
Composite closed captions, and digital and analog audio. Optional ZeeVee
DIN to VGA cables are required for connecting VGA sources. Component and
VGA inputs are ideal for connecting satellite receivers and digital signage
players. Video is encoded into MPEG-2 and audio into AC-3. VGA input
supports a wide range of resolutions from 640 x 480p/i to 1920 x 1080p/i,
and Component input supports 1080p/i30, 720p60, and 480p/i. 1RU rack ears
are integrated. Linking up to built-in tuners eliminates the need for matrix
switches or receivers.
The HDbridge3000 provides a highly flexible, incredibly reliable, and simple
to use solution for delivering HD and SD video simultaneously over RF and IP
networks, all within a compact 3RU footprint. With the flexibility to grow with
your deployment, ZeeVee enables you to future proof your video distribution
investment. Distribute two sources / channels of HD video up to 1080p resolution or six channels of SD 480i video per card directly from your audio and
video sources to an unlimited number of displays over almost any distance or
network. The HDbridge3000 converts audio and video into an output which
can be sent over coax cable to an HDTV’s QAM or DVB-T/C tuner or with the
IP enabled card an MPEG-2 IP stream can be simultaneously multi-casted
over most Ethernet networks and to an IP set top box or computer. That
means you can send your content to an unlimited number of displays over
nearly any distance - and change sources on any display simply by changing
the channel on the display.
Also available: HDB2620
Picture represents stacked image of the front and back of the ZVPRO820.
ZEEVEE HD DIGITAL TUNER/DECODER QAM
ZEEVEE DUAL CHANNEL DIGITAL VIA UNENCRYPTED HDMI
SKU: ZVSYNC
SKU: ZVPRO820
Have a projector, monitor or other display without a digital tuner? ZvSync is a
digital cable tuner with HDMI and composite outputs. It can be used for any
display that is not equipped with a built-in digital tuner, such as: projectors,
HDTVs without tuners, commercial displays, monitors, and analog TVs. The
ZvSync enables you to connect to any ZvPro or Hdbridge encoder / modulator
and receive over 100 channels on your display. Perfect for sports bars, assisted living and education environments where you have both televisions and
projectors. The ZvSync takes the signal via coax from the ZvPro and converts
it to either an HDMI or composite video output that can be used on nearly
any display. The ZvSync includes both a partial learning remote control and
an external IR receiver. The receiver has a 1 meter cable to enable you to
hide the ZvSync unit behind the display or projector and move the IR receiver
to a visible location by the display.
ZvPro820 delivers uncompromising digital HD video distribution over your
existing coax cabling from your unencrypted HDMI sources. This one channel
QAM, MPEG2, Encoder/Modulator unit allows you to easily distribute content
up to 1080p resolution to an unlimited number of displays, using the TV’s
built in QAM tuner, eliminating the need for cumbersome, expensive set-topboxes or media players at each display. ZvPro units can be managed either
locally through the color LCD screen on the front panel or remotely using our
intuitive web based, management and control system – Maestro. All ZeeVee
units support Dolby Digital audio encoding. Add information channels for
free with ZvShow, a built-in media player and additional channel included in
each ZvPro. With Emergency Alert System capabilities, keep your guests, residents and patrons safe. Included Closed Captioning makes your installation
ADA compliant. ZvPro allows you to control power output from 25 to 45dBmV
QAM output levels in 1dBmV steps. ZvPro delivers resolutions from 480i to
1080i/p, which means you’re covered regardless of content resolution.
The VeCOAX PRO8 HD IP is the perfect solution to distribute HD video signals over WIFI, LAN, WAN, internet,
to an unlimited number of network devices such as IPTV Decoder boxes, tablets, computers, laptops, mobile,
internet distribution servers, and any other video over IP player devices. The PRO8 HD IP converts eight HD high
definition video signals into 8x MPEG4 H264 broadcast quality SPTS IP streams, selectable one by one to UDP/
RTP, multicast or unicast, with any audio format including the AAC or multi-channel surround, and selectable
bitrates and SI. Multiple units of different models can be connected together at any time to expand the number
of channels as you need.
PVI MICROMOD 2 HD 2 CHANNEL COMPACT HD MODULATOR
SKU: VECOAX- MMD2- HD - Q
The VeCOAX MICROMOD TWO is a 2 channel full HD compact modulator that is the ideal solution to distribute
two SD or HD 720p / 1080i / 1080p video signals to an unlimited number of HD televisions over the existing
coax cables. The result is perfect, full digital HD quality - the same as the original source up to 1080p. Features
universal inputs such as HDMI, component, composite, audio and select via software and IPTV outputs to watch
on WIFI/LAN on tablets/computers/IP decoders. Can be compactly wall or desk mounted or rack mounted with
the included rack ears.
PVI MICROMOD HD 1 CHANNEL COMPACT HD MODULATOR
SKU: VECOAX- MMD - HD - Q
The VeCOAX MICROMOD HD is a compact HD Modulator that distributes HD video signals to an unlimited number of HD televisions over the existing coax cables. It is the perfect replacement for old analog modulators and
the perfect alternative to much more complex matrix and extenders. The MICROMOD HD converts one HD video
signal into a digital RF TV channel you can inject directly to the coaxial cabling and receive on any digital HD TV
as regular HD station on the channel list. Multiple units can be used in a system, also installed in different points
to inject the local HD video signal from their position to the same coax cable, up to the number of channels you
need. The Micromod can be used anywhere, is totally silent and fanless, and can be wall mounted or placed on
desktop. The VeCOAX MICROMOD installs in minutes - just connect your video sources and the coax out. Comes
standard with all the accessories including all the HD Video Cables.
PVI MICROMOD 2 USB 4K 2 CHANNEL COMPACT MODULATOR W/ 4K PLAYBACK
SKU: MMD - USB -4K
The VeCOAX MICROMOD TWO 4K is a 3 channel, full HD and 4K compact modulator. It is an ideal solution to
distribute two SD or HD 720p / 1080i / 1080p video signals plus one 4K UHD ultra high definition content to an
unlimited number of HD televisions over the existing coax cables. Three independent and simultaneous channels
are included in the box. Features HDMI full digital HD quality and stereo / 5.1 / 7.1 audio and built In coax
amplifier that works directly with your coax distribution. Expandable to multiple channels adding more units at
any time.
Also available: ZVPRO810
WWW.STAUB.CA/CAV
25
VIDEO WALL & MULTI-VIEWERS
AVENVIEW H264 HDMI OVER IP SET WITH
SEAMLESS MATRIX SWITCHING & VIDEO
WALL WITH AUDIO OUT SUPPORT
SKU: HDM - C6MWIP - SET
The Avenview HDM-C6MWIP-SET, HDMI H.264 IP
Videowall/Matrix Decoder/Encoder delivers end-to-end
streaming media over IP networks. The HDM-C6MWIP-SET is composed of two units - a Decoder and
an Encoder. The Decoder H.264/ MPEG-4 AVC video
compression format, it receives the encoded IP signal
through LAN port and decodes video/audio signal
out through HDMI interface, it also supports stereo
de-embeding and streaming resolutions up to 1920 x
[email protected] Features include M-Series flexible control
and management options; CEC function; supports live
IP video stream decoding; supports POE; capable of
outputting two IP Streams (allows video previewing);
supports multiple interfaces HDMI, DVI, VGA, YPbPr or
CVBS signals over IP networks.
Also available: HDM-C6MWIP-S (sender) and
HDM-C6MWIP-R (receiver)
WWW.STAUB.CA/CAV
AVENVIEW VIDEOWALL IP CONTROLPRO FOR
H264 MODELS, MVIP, MXIP, MWIP MODULES
AVENVIEW 4X1 HDMI MULTIVIEWER WITH
ROTATION [email protected] UHD SUPPORT
SKU: CTRLPRO - MIP
SKU: HDM2- SPLITPRO -T4K
The Avenview CTRLPRO-MIP IP Controller simply
provides communication to the M-Series IP Extenders
(C6MXIP, C6MWIP, C6MVIP) and third party controllers to communicate, Telnet and RS-232 commands
to automate high definition video and high quality
audio to multiple screens. This device can be accessed
from a WEB Browser and allow control commands to
Avenview Video IP solution allowing connection by
the following: Point-to-MultiPoint with CAT5/6 using
Managed/Unmanaged Network Switch; Matrix Function
- add multiple Sources to multiple RX with no signal
loss; Videowall Function - add multiple Sources to
multiple TX and RX to the HD displays with no signal
loss; Ability to communicate via telnet from third party
control systems such as Crestron, Amx, and Control 4;
Auto detects TX/RX devices.
This 4 x1 multiviewer Scaler was developed for
the purpose of supporting higher output resolution
([email protected] 4:4:4 8bits) for multiple sources on a single
screen. This HDMI device can accept 4 HDMI input
digital sources and combine (4) four video signals onto
a single HDMI UHD or HD monitor. The user can easily
manage each input via the supplied Control Software
and create any layout and position of any of the 4 (four)
Inputs on a single monitor. This device supports full
range of input video resolutions up to [email protected] (RB)
or full HD1080p and audio RCA breakout supported for
external audio distribution systems. Audio channels can
be selected to playback with input or can be muted.
AVENVIEW 4 SCREEN VIDEOWALL CONTROLLER WITH [email protected] ROTATION AND AUDIO
SUPPORT
AVENVIEW 12 SCREEN VIDEOWALL CONTROLLER WITH 4K INPUT- MODULAR, HDMI INPUT
AND DVI OUTPUT
AVENVIEW MULTI INPUT 4 SCREEN VIDEOWALL CONTROLLER WITH ROTATION AND
AUDIO SUPPORT
SKU: HDM2- PROWALL-T4K
SKU: DVI - PROWALL-12X
SKU: MLT- PROWALL-4K
The HDM2-PROWALL-T4K 4 screen HDMI UHD [email protected]
4:4:4 video wall processor is the first videowall processor to input a TRUE [email protected] source and output onto a
4 HD Screens. Processing the signal pixel to pixel with
a vivid, clear and crisp picture without resolution loss.
This unit can be used as a dedicated 2x2 videowall at
UHD [email protected] or 1080p with rotation, different preset
or custom layouts. This unit can support cascading
through software to allow using multiple units to create a larger videowall 3x3 with stunning clarity using
the same UHD [email protected] input for displaying content
on your flat panel displays or projectors. Bundled with
its own control software the user can simply configure
different layouts for any solution such as 1x1, 1x3, 1x4,
2x2 and mosiac. The HDM2-PROWALL-T4K can accept
both DVI/HDMI source inputs/outputs, made with the
embedded scaler that converts signals from either
DVI/HDMI source to match the native resolution of
monitors, flat panel displays, projectors connected to
the 4 outputs connectors. Each output resolution can
be selected for each display, also settings up to full HD
1080p and PC resolutions WUXGA (1920x1200).
The DVI-PROWALL-12x 12-Displays Video Wall
Processor was developed to meet and accommodate
resolutions up to 1080p. This unit can support up
to 12 DVI/HDMI outputs to expand the spectrum of
video wall applications, because of its modular add-on
card design concepts. Users can therefore modify the
number of output ports based on different scenarios.
The bandwidth of the video can be controlled by any
PC/laptop either via Ethernet or RS232 control. These
control modules and control software has been revised
for quick and easy setup within any environment. The
DVI PROWALL-12X allows you to input 2 DVI/HDMI
supports up to 1080p and the VGA/Component port
supports up to WUXGA (1920x1200).
The Avenview MLT-PROWALL-4K quad multi-input
videowall controller is a four channel high end 10-bit
processor with 3D motion adaptive de-interlace, low
angle smooth algorithm and 3:2/2:2 film mode processing for creative irregular video wall layouts. This video
wall is designed with 3 input and 4 output ports with
the capability to select up to 256 pre-defined display
modes. Settings can be achieved through Dip switch
settings on front panel. Pre-defined display modes
include multiple rotation angles, position and arrays.
Customized layouts can be added from the OSD menu.
Dual contents can be displayed on the video wall at the
same time. One HDMI 4k/2k loop out port is available
for daisy chain connection while cascading with multiple units of MLT-PROWALL-4K for video wall larger
than four displays. The MLT-PROWALL-4K is designed to
display 3-4 panels as one display unit based on full HD
display with the same size and resolution.
27
BROWSER COMPATIBILITY
SMARTPHONE APPS
OvrC supports the latest versions of these browsers:
Compatible with iOS 7+ and Android OS 4.4+
SYSTEM MANAGEMENT
EMPOWER YOURSELF WITH OVRC
OVRC PRO LIFETIME
LICENSE + HUB
INSTANT ACCESS - WITHOUT ROLLING A TRUCK!
OvrC (pronounced oversee) is your virtual on-call technician, equipping you to provide great service in minutes, no matter where you are. No more pointless truck
rolls! Save valuable time and money with OvrC’s powerful features. You’ll feel like you could take on the world. Your customers will think you’re a hero!
OvrC Pro extends your visibility and
access to the entire network of IP devices,
including non-SnapAV products, all within the same OvrC platform you love. With
OvrC Pro, you get access to enhanced
troubleshooting capabilities and diagnostic data that makes remote support
easy, eliminating unnecessary truck rolls
and enabling you to provide world-class
service to your clients.
WHAT EXACTLY DOES OVRC DO?
OvrC uses the Internet to contact and control your customer’s equipment, directly from your mobile device or computer. Whether you’re twelve feet up a ladder or
relaxing on the beach, OvrC lets you:
UPDATE
FIRMWARE
ACCESS THE DEVICE’S
LOCAL UI
RECEIVE EVENT
NOTIFICATIONS
CYCLE POWER TO
RESET A DEVICE
EDIT NETWORK
SETTINGS
This product features a lifetime license,
so there’s no recurring fees to worry
about. And if you are already implementing a service plan in your jobs, OvrC Pro
is the perfect solution to maximize your
margins.
ACCESS COMMONLY USED
CONFIGURATION & CONTROLS
BENEFITS
OVRC PRO EMPOWERS YOU AND
YOUR CUSTOMERS
EASY TO USE
PRODUCT COMPATIBILITY
OvrC currently supports a variety of products: surveillance, power, and networking.
The OvrC ecosystem continues to grow.
No manuals required. The interface is
straight forward and easy to navigate
so you don’t waste time with guessing
games.
PLUG - AND - PLAY SETUP
Getting started is easy. Just install your
device, claim it in the app, and you’re
ready - no additional hardware needed!
REMOTE MANAGEMENT
Receive alerts, troubleshoot, and fix
common issues before your customer
recognizes there’s a problem.
OvrC Pro offers full visibility of connected devices and premium
network transparency so you can tackle common network issues
quickly and discreetly, without rolling a truck.
With OvrC Pro, you can:
OVRC ENABLED PRODUCTS
WITH IP+ POWER, NEVER ROLL A TRUCK
TO RESET A DEVICE AGAIN.
WWW.STAUB.CA/CAV
REMOTELY TROUBLESHOOT AND MANAGE
YOUR CUSTOMERS’ NETWORKS.
EASE YOUR CUSTOMER’S MIND WITH
VIDEO AND HARD DRIVE NOTIFICATIONS.
VIEW IP
DEVICES
DELIVER END USER
MOBILE APP
MONITOR SYSTEM
HEALTH
TEST ISP
PERFORMANCE
INTEGRATE CONTROL
SYSTEMS
MANAGE FIRMWARE
REMOTELY
29
NETWORKING
ARAKNIS NETWORKS 300 SERIES DUAL- WAN GIGABIT VPN
ROUTER
ARAKNIS 300- SERIES DUAL- BAND CONCURRENT WIRELESS - N
INDOOR ACCESS POINT
ARAKNIS NETWORKS 310- SERIES 24- PORT L2
MANAGED GIGABIT SWITCH FRONT PORTS
SKU: AN -300- RT-4L2W
SKU: AN -300- AP - I - N
SKU: AN -310- SW- F -24
This Araknis Networks router is perfect for high traffic networks. It has 4
Gigabit LAN interfaces with full Gigabit LAN-LAN speed. It supports 2 Gigabit
WAN interfaces that can be configured in load-balancing or link failover
modes. The router has embedded firewall for added network security, and
also supports a plethora of VPN technologies to allow remote access to client
network. Dual-WAN allows a dealer to connect the client network to two
different ISPs. The router has an embedded 4 Gigabit switch on the LAN side.
Use it to connect the router to multiple switches in the network or connect
other devices to the router directly. The LAN side of the router supports full
LAN-LAN Gigabit speed with Jumbo Frame support for better video streaming. If you need to remotely access the client network via VPN, the router
supports PPTP, L2TP, IPSec, and OpenVPN technologies. OpenVPN is an easy,
secure option that is backed up by the open source community.
Featuring dual-band steering, this sleek little WAP runs on both 2.4 and
5 GHz concurrently and auto-selects between them for seamless performance with minimal interference. With 2.4 and 5 GHz radio signals running
concurrently, you have more availability for traffic and less chance for a slow
connection. With band steering, the WAP will automatically detect the best
signal quality for each client that supports 5GHz and command the client
to use either a 2.4GHz or 5GHz band. Its included mounting plate, mounting
template, and backing plate make it a breeze to install. This WAP’s square
shape gives it the versatility to suit ceiling- or wall-mounted applications.
Each WAP comes with a mounting plate to fit both single-gang or double-gang outlets. Plus with OvrC enablement you get easy set-up, remote
access, real-time monitoring, and customer management all from your phone,
computer, or tablet.
Get powerful, reliable connectivity for a wide range of
network devices with our flagship series of switches.
Fully managed means full control of the network.
This switch provides a full L2 managed solution with
functionality to handle the most complex and robust
installs. 1Gbps speed across all ports allows for powerful connectivity, while a user-friendly GUI and multiple
mounting options ensures a quick and easy install.
With a powerful 1Gbps on all ports simultaneously, this
switch can support the backbone of an install or simply
act as a desktop add. Plus, LEDs on the front and back
of the device make it easy to see port status. And like
all Araknis switches, you have remote management
capability via OvrC.
Also available: AN-310-SW-R-24, AN-310-SW-F-48, AN-310SW-F-16, AN-310-SW-R-16, AN-310-SW-F-8, AN-310-SW-R-8
ARAKNIS NETWORKS 210- SERIES 24- PORT
WEBSMART GIGABIT SWITCH WITH PARTIAL
POE+ AND REAR PORTS
ARAKNIS NETWORKS 110- SERIES 16- PORT
UNMANAGED+ GIGABIT SWITCH WITH FRONT
PORTS
SKU: AN -210- SW- R-24- POE
SKU: AN -110- SW- F -16
For installs that require PoE on a budget, opt for the
Araknis Networks 210-series switch. With it you get
a sizable power budget and full PoE capability on all
ports, up to 30W. Use this switch’s SFP ports to provide
RJ45 uplinks to other devices, and/or fiber uplinks to
extend the network over long distances while getting a
stronger signal. Featuring a dedicated fabric, they don’t
share a backplane with any other ports on the switch,
which means you get a full 1 Gbps and don’t have to
sacrifice a dedicated PoE port to use them. You can
also take advantage of Websmart, which allows you to
control PoE and IP settings via OvrC. When it comes to
operation, this switch has it all, including plug and play
capability, multiple mounting options, and a sleek, 1U
design. And with multi-speed fans, this switch offers a
discreet solution to combat high temperatures.
These sleek Unmanaged+ Gigabit switches deliver an
unrivaled networking solution for any job. Unmanaged+ takes the reliability and cost-effectiveness of an
unmanaged switch and adds basic cloud management
via OvrC. Now you can see through the entire network
to each connected device, making it easy to troubleshoot problems and adding a layer of visibility to an
already great design. Designed exclusively for installers,
they offer visibility to end devices via the OvrC cloud
management platform, 1Gbps support on all ports
simultaneously, plug-and-play capability, and a new rift
lighting design with network performance indicators.
And with multiple mounting options and a versatile
design, this switch can go just about anywhere.
Also available: AN-110-SW-R-16, AN-110-SW-F-24, AN-110SW-R-24, AN-110-SW-F-8, AN-110-SW-R-8
Also available: AN-210-SW-F-24-POE, AN-210-SW-F-48POE, AN-210-SW-R-16-POE, AN-210-SW-F-16-POE, AN-210SW-R-8-POE, AN-210-SW-F-8-POE
ARAKNIS 500- SERIES INDOOR WIRELESS ACCESS POINT
ARAKNIS 700- SERIES INDOOR WIRELESS ACCESS POINT
SKU: AN -500- AP - I - AC
SKU: AN -700- AP - I - AC
Provide faster wireless speeds and better signal reliability with the Araknis
Networks 500-Series 1200 Indoor Wireless Access Point. Equipped with the
latest AC wireless technology, this WAP offers faster network speeds than
ever before, while high TX power ensures proper coverage throughout your
install. And because it operates via concurrent radio interfaces, you’ll get
automatic dual-band steering between 2.4 and 5 GHz bands for optimal performance. Fast Roaming allows for a quick and seamless transition between
multiple wireless access points. The location-based triangulation helps
determine the closest and strongest AP, then automatically connects your
device. Add in remote management via OvrC and a sleek design, and you have
a WAP that can’t be beat.
Provide faster wireless speeds and better signal reliability with the Araknis
Networks 700-Series 1750 Indoor Wireless Access Point. Equipped with the
latest AC wireless technology, this WAP offers faster network speeds than
ever before — up to 1750 Mbps, while high TX power ensures proper coverage throughout your install. With 2.4 and 5 GHz radio signals running concurrently, you have more availability for traffic and less chance for a frustrating,
slow connection. As an added convenience, band steering is included, so the
WAP will automatically position 5GHz clients onto that respective radio signal, decreasing congestion on the 2.4 GHz radio and providing the best user
experience possible. Combined this with a 3x3:3 Wireless-AC antenna, and
you’ll provide clients will incredible speed and a reliable connection.
WWW.STAUB.CA/CAV
Unmanaged switches provide simple, effective and reliable networking solutions. Easy setup, durable
metal housings, and silent operation allow these switches to offer dynamic, durable support that meets
today’s networking demands. Managed switches include a user-friendly, intuitive Web interface. Easy to
manage and engineered with a premium feature set, these switches offer expert control and robust support for demanding networking environments. As managed switched allows you to monitor the entire
network through its user friendly web interface, you can individually name ports for fast troubleshooting, set up VLANs to isolate chatty devices and enhance your network performance.
31
AUDIO
INTERM 60W PUBLIC ADDRESS MIXING AMPLIFIER, 1U SIZE,
SMPS, 3 INPUTS ( MIC, MIC/AUX, AUX )
INTERM 60W COMMERCIAL MIXER AMPLIFIER
8/4OHM (40W/60W ) OR 70V/100V ( HIGH - Z )
SKU: MA-106N
SKU: PA-60
The MA-106N is a 1U compact 3-input channel 60W PA Mixer Amplifier. Ideal
for use in a small place such as the classroom, training center, restaurant and
cafe for both BGM playback and public address. Powered by a high efficiency
class D amplifier topology, this amplifier offers high reliability, light weight,
high energy efficiency, low power consumption and low heat dissipation. Plus,
additional functions such as input of MIC and LINE, tone control, mute, priority function, auto sleep mode and phantom microphone power are possible
with the compact MA-106(N)/110(N).
The Inter-M PA-60 are integrated mixer amplifiers. They are complete and
economical multi-purpose desktop mixer-amplifiers providing a cost-effective solution to public address and similar applications. Three versions
are available with outputs of 60 watts respectively into direct (4 ohms)
or distributed (70V/100V line) speaker systems. Each have six inputs - five
microphones or line level selectable balanced on XLR-F and/or euro block
connector inputs with rear mounted level selector switch setting the input
sensitivity from mic to line level. The sixth input is high impedance unbalanced on summing RCA connectors. A telephone input terminal is provided
for telephone paging. The PA-Series amplifier is designed for reliable service
in permanent installations, and comes complete with short-circuit and thermal protection and is ideal for voice reproduction and BGM applications.
Also available: MA-110N
INTERM PRE AMPLIFIER- MIXER, 8 MONO INPUT/4CH STEREO INPUT/MAIN OUT/REC OUT
SKU: PP -6214
The Inter-M PP6214 is a two output Pre-amplifier/Mixer which allows any of the unit’s 10 input signals to be
routed to Output 1, Output 2 or both. ThePP6214 is ideal for dual zone public address or audio visual installed
applications such as factories, leisure centers, hotels and general PA systems. It has 8 Mic inputs (CH 1 to CH 8), 7
Line inputs (CH 2 to CH 8), 2 Stereo inputs and 2 Priority input. Phantom power (18v block switched) can supply 8
Min inputs and a 3 bands equalizer per output allow you to make correction independently on the 2 outputs.
Also available: PP-6213
Also available: PA-120, PA-240
INTERM 240W COMMERCIAL POWER AMPLIFIER, 4?/70V/100V,
HPF, DC 24V INPUT TERMINAL
INTERM 240W DIGITAL MEDIA MIXING AMPLIFIER, STREAMING
NETWORK AUDIO, INTERNET RADIO
INTERM 8X8 AUDIO MATRIX CONTROLLER, PAGING MIC INPUT,
BUILT- IN MONITORING SPEAKER
INTERM PROFESSIONAL POWER AMPLIFIER, 2 CHANNEL
280W/500W/850W, BRIDGED MODE 1000W/1700W
SKU: PA-6324
SKU: PMU -240N
SKU: PX-8000
SKU: V2-2000
The PA-6324 is Inter-M’s best-selling commercial PA amplifiers. The 6300
Series are recognized for their ruggedness, reliability and performance. They
are the installer’s choice for sound reinforcement, background music, paging,
and public address systems. Featuring low-distortion, low-noise amplifier
electronics circuits which provides a high-output and a high S / N ratio. PA
6300 series amps provide a wide dynamic range with excellent headroom. An
onboard High Pass Filter protects both amplifier and speakers from damaging transients. A comprehensive thermal/electrical protection circuit ensures
long-haul dependability. Thermister protected output helps ensure overall
stability and provides input overload protection.
The PMU-240N is a 6-Input 240-watt mixer/amplifier with a built in digital
portable media player that will playback MP3/WMA/WAV audio files. The
PMU-N Series offers input flexibility with its 6 microphone and line level
selectable inputs. Direct PC USB connection is possible using the built in USB
PC sound card. A network audio connection makes the PMU-N Series amplifier great for BGM applications that receive their audio program via network,
LAN, Dedicated WAN and internet TCP/IP or RTSP.
The PX-8000 is an easy-to-operate 8x8 matrix mixer/controller that is usable
with or without remote modules. The PX-8000 and related components
provide the latest technology combined with ease of operation to create a
system that offers enormous capability and flexibility. Local audio sources
may be sent to any combination of up to eight remote zones and can do so
with either local or remote control. This type of flexibility makes this product
ideal for any type of multi-zone system, including hotels, airports, casinos,
hospitals, conference centers, and restaurants. The remote devices ensure
that the right amount of control is located in the correct locations throughout a facility. The unit features local and remote paging capabilities with
priority control. Each of the eight output zones is capable of being controlled
by a remote station. A monitor speaker is built in for local signal monitoring
at the controller.
This amplifier is part of the Inter-M power amplifier line-up for the professional audio market with stable SMPS (Switch Mode Power Supply) applied
for low power consumption and light weight. It also provides powerful and
high quality sound based on high damping factor. Features 2Ω-load stable
per channel, 4Ω-load stable in bridged mono; 2U rack space; switch mode
power supply available for high efficiency and low weight; front panel indicators for output signal, clip, protect and power; and rack ears for permanent
installation in a standard 19”(rack mount width) enclosure.
Also available: PA-6312, PA-6336, PA-6342
WWW.STAUB.CA/CAV
Also available: PMU-60N, PMU-120N, PMU-360N, PMU-480N, PMU-600N
Also available: V2-1000, V2-3000, V2-4000, V2-5000
33
AUDIO
AUTONOMIC MIRAGE ESERIES MUSIC STREAMER
SKU: AU - MMS -5A
Engineered exclusively for custom integration, the world’s first cloud-based media server connects music lovers
to the greatest selection and highest quality of content. Stream Hi-Res Audio from local libraries, NAS, and all the
most popular streaming services. Play uncompressed, lossless audio formats, and complete the infinite playlist
with the most popular streaming services, internet radio and music via AirPlay. The MMS-5A supports reference
quality, high resolution 24-bit/192kHz content, perfectly rendered through analog, coaxial digital and USB outputs.
You get install flexibility, your customers get incredible sound. Distribute up to six independent streams of audio
up to as many as 96 zones with any combination of Mirage Amplifiers.
AUTONOMIC MIRAGE ESERIES MUSIC STREAMER
SKU: AU - MMS -1E
EPISODE 70V DIGITAL AMPLIFIER, 60W WITH IR & RS232
SKU: ECA-70VMINI -60W
The Episode 70V Digital Amplifier 60W with IR & RS232 may be small, but
it packs a punch. This amplifier is perfect for boosting sound and delivering
extraordinary audio quality to even the smallest of TVs in restaurants, bars, or
small conference rooms, or to maximize the sound of outdoor speakers. This
single-channel 70V amplifier is equipped with three inputs and an external
12VDC power supply. Three inputs enable connection to a variety of sources,
including microphone input or other analog sources. An integrated mixer
blends all sources by default – perfect for background music and paging
applications. It also has the flexibility to select discrete input source.
The MMS-1e Mirage Music Streamer is a solid-state, single-source music player complete with the features and
functionality expected from the Mirage family of products. Seamlessly integrate the MMS-1e into any popular automation system, and deliver playback of pure, 24-bit/192kHz high-resolution audio, in addition to the most popular online music streaming services. Plus, mirrored physical outputs via eAudioCast allow for the utmost flexibility.
Paired with the M-120e Digital Amplifier, the MMS-1e supports up to two discrete streams of audio-over-Ethernet
using eAudioCast technology.
EPISODE 240 WATT RACK MOUNTABLE 70 VOLT COMMERCIAL
AMPLIFIER- MIXER
SKU: ECA-70MIXAMP -1-240
Perfect for light commercial applications, these Episode 70V Mixer-Amplifier include all the features needed for background music and paging. They
feature eight inputs for microphone and stereo hookups, an integrated mixer
that provides expert blending, XLR microphone inputs with independent
priority modes that enable audio “ducking,” and a powerful amplifier. System
expansion is simple with this mixer/amplifier. Not only is there a balanced
line output to daisy-chain a second amplifier, but there is also a fixed record
output and preamp loop output / amp input should an external EQ or DSP be
needed.
Also available: ECA-70MIXAMP-1-60, ECA-70MIXAMP-1-120
INTERM 6.5” FULL RANGE 20W CEILING
SPEAKER, 500/1K/2KOHM , KS CERTIFIED
SKU: CS -20
EPISODE 300W PER CHANNEL, 2 CHANNELS 70 VOLT DIGITAL
POWER AMPLIFIER ( IR, RS232, & IP CONTROL )
SKU: ESA-70V2CH -300W
These 70-volt, 2-channel digital amplifiers are OvrC enabled for easy remote
management, while popular control drivers, IR, IP, and RS-232 allow you to
customize audio in commercial environments. It fits perfectly in restaurants,
bars, or small conference rooms, and can maximize the sound of an outdoor
speaker system. With four inputs and a loop out, it provides all the flexibility
needed for a professional installation. This amp offers standard RCA connections for unbalanced inputs, as well as screw terminals for balanced/unbalanced inputs. Plus, an intuitive UI allows you to route inputs and outputs.
Also available: ESA-70V2CH-150W, ESA-70V2CH-500W
RUSSOUND 70/100V STREAMING MIXER AMPLIFIER
SKU: XZONE70V
The Russound XZone70V features built-in XStream technology, enabling
popular streaming content from the cloud, home network, AirPlay enabled
tablets and phones - all from a single component. The built-in audio streamer
offers the best audio content from the internet or even a user’s personal
networked audio collection using DLNA. The rear panel even includes a USB
port for playing content from a Flash Drive or an externally powered USB
hard drive. Features include 70v/100v/4Ω operation, powerful 300W output
and controllable by the XTS Touchscreen or the MyRussound App. XStream
complement of streaming sources including: SiriusXM for Business, Spotify,
Pandora, AirPlay and more.
The CS-20 ceiling speaker from Inter-M is a high
quality, fast-fit solution which features premium grade
drivers for impressive acoustic performance and longterm reliability. The Inter-M CS20 20W ceiling loudspeaker is ideal for paging and ambient background
music applications such as offices, retail, waiting rooms,
corridors, Board Room and anywhere a quality ceiling
speaker is required. Low impedance input terminal provides a connection terminal of low impedance (8ohms)
for playing high quality music. High rated input and
frequency make it possible to play wide frequency up to
20kHZ and high sound pressure music by accepting an
output of high rated input and frequency characteristic
up to over 40W(PGM).
Also available: CS-30, CS-80
WWW.STAUB.CA/CAV
INTERM 20W, 1WAY FULL RANGE SPEAKER
100V TAPPING 20/10/5/2.5/1.3W PLUS 20W LOW
Z BYPASS ( BLACK )
SKU: CI -40AT- B
The CI series elegant and stylish speaker design is
manufactured from a precision-machined and acoustic
tuned injection molded abs. Featuring 4” full-range
drivers, 90 degree conical dispersion pattern, high
sensitivity 87dB / 88dB SPL and corrosion-resistant
powder-coated grill. Rigorous QC and testing ensures
product quality and durability. The CI series speakers
are full range with a uniform frequency response and
pristine sound quality. The CI Series speakers are ideal
for BGM playback and also offer precise voice reproduction. The new articulated mounting bracket offers ease
of installation with precision speaker orientation.
Also available: CI-40AT-W, CI-60AT-B, CI-60AT-W
INTERM 50W 5” 2- WAY PASSIVE,
50/25/13/6.5/3.3W ( WHITE )
SKU: WS -50T- W
The WS Series speakers can be used in various applications from small-sized venues to mid/large-sized
venues, particularly facilities that require a high quality
of background music. The series has been applied
with newly developed full-range unit, HF driver and LF
driver unit to provide high-power clear sound without
distortion. With the speaker taps on the rear panel of
the every WS Series model, 100 V line/70 V line and low
impedance (8 Ω) output can be adjusted. With an IP54
rating, the WS Series can be used in various indoor and
outdoor applications. Install with provided steel-made
durable U bracket and even better with the Knuckle
Bracket.
Also available: WS-15T-W, WS-15T-B, WS-30T-W, WS-30T-W,
WS-80T-W, WS-80T-B
35
AUDIO
EPISODE 200 COMMERCIAL SERIES IN - CEILING 25/70-VOLT SPEAKER WITH 8” FULL- RANGE
DRIVER ( EACH )
SKU: ECS -200- IC-8
When you need a speaker to win those competitive bids, look no further than the ECS-200-IC-8. Perfect for commercial applications needing background sound and paging, this in-ceiling speaker hits the sweet spot of price
and performance. It’s equipped with a durable aluminum baffle that makes the speaker less prone to rust, and
flying leads for tap settings (0.5W, 1W, 2W, and 4W) so the speaker’s output level can be adjusted to meet your
application’s requirements. A tile bridge is included in the box for fast and easy installation. Everything needed
for this installation comes in one box – the single-packed speaker, the tile bridge, even the wire nuts.
EPISODE 650 COMMERCIAL SERIES IN - CEILING 70-VOLT
SUBWOOFER WITH TILE BRIDGE AND 8” WOOFER ( EACH )
SKU: KIT- ECS -650- ICSUB -8
Give your next commercial installation a boost of performance from
a discreet form factor with the Episode In-Ceiling 70V Subwoofer.
This sub is the perfect complement to our in-ceiling speakers, providing deeper bass, better bottom end and improved low frequency
performance. Installed directly into the ceiling, it provides exceptional sound clarity and depth and won’t take up any unnecessary
space. A high-temperature, UV-stabilized baffle stands the test
of time. The grille has extra reinforcement so it won’t fall out no
matter how much bass is playing. Plus it’s a breeze to install, thanks
to an innovative 3-piece tile bridge, front-mounted tap settings, and
a removable screw terminal.
EPISODE 250 COMMERCIAL SERIES IN - CEILING 25/70-VOLT TWO - WAY SPEAKER WITH 6 1/2”
WOOFER ( EACH )
SKU: ECS -250- IC-6
If your next commercial job calls for performance, an attractive look, and incredible value – this Episode Commercial Series In-Ceiling 25/70-Volt Speaker is dressed to impress. Its true two-way design delivers stellar performance for background music and paging applications, while a micro-perf aluminum grill provides a contemporary fit and finish. A two-way design delivers better sound quality than a single full-range driver. The Nomex
spider and high-temperature voice coil assure a long lasting product, and the fluid-cooled neodymium tweeter
magnet delivers a smooth, high-frequency performance. Equipped with flying leads for 0.5W, 1W, 2W, and 4W tap
settings, the output level of each speaker can easily be set to meet your application’s requirements.
EPISODE COMMERCIAL SURFACE MOUNT, ALL WEATHER, 70V SERIES 4” SPEAKER
( WHITE | EACH )
SKU: ECS - AW70V-4- WHT
EPISODE 650 COMMERCIAL SERIES IN - CEILING 70-VOLT SPEAKER
WITH TILE BRIDGE AND 6” WOOFER ( EACH )
Rugged commercial design, easy installation and quality sound join forces in these Episode All-Weather Commercial Series Surface Mount 70-Volt Speakers. An easy-to-access external tap setting makes adjustments a breeze,
while a quick-hang bracket frees up one hand for fast installs. A true all-weather product, this speaker features
polypropylene woofers for a deep, full sound and aluminum tweeters that produce crisp, clear audio in any
temperature. Its hardware is ready to live a hard life too, thanks to aluminum grills and brackets, a UV-treated,
mineral-filled polypropylene cabinet, and stainless steel bolts. Plus they are designed to perform flawlessly in
extreme temperatures from -5 degrees to 160 degrees Fahrenheit.
SKU: KIT- ECS -650- IC-6
Get premium sound quality and unparalleled performance with the Episode 650
Commercial Series 70-Volt Speaker. Top-notch components, a wide frequency response, and a two-way design provide exceptional sound clarity and dynamic highs
and lows. Features a Mica-filled polypropylene woofer and 1” silk dome tweeter with
neodymium magnet, plus a 1.2” oversized voice coil. Outstanding driver voicing is
combined with a 1st order crossover for sound clarity beyond expectations, while
a computer-optimized, low-turbulence tube port provides improved low-frequency
response. An innovative 3-piece tile bridge, front-mounted tap settings, and all-cardboard packaging make this professional-grade product perfect for your next commercial application. This commercial speaker is UL listed, as well as plenum rated.
It’s approved for use above ceilings in air handling and plenum locations – and has
passed the stringent standards needed to get the UL stamp of approval.
Also available: KIT-ECS-650-IC-4
Also available: ECS-AW70V-4-BLK, ECS-AW70V-6-WHT, ECS-AW70V-6-BLK
EPISODE 650 COMMERCIAL SERIES 70V PENDANT
SPEAKER WITH 6” WOOFER AND GRIPPLE KIT ( BLACK |
EACH )
SKU: KIT- ECS -650- PND6- BLK
Ideal for spaces with tall, open ceilings, this Pendant Speaker gets
the sound down where you need it and features wide dispersion
that’s perfect for background music and paging applications. And
thanks to smart engineering that includes a Gripple cable mounting
kit and carrying handle, installing it has never been easier. Equipped
with top-quality components, a two-way design and outstanding
driver voicing, this speaker provides exceptional sound clarity while
hitting dynamic highs and lows. Add in the UL 1480 listing, toolfree tap settings, and all-cardboard packaging – and you’ve got a
professional-grade product that’s perfect for your next commercial
installation.
RUSSOUND 70V SURFACE MOUNT INDOOR/OUTDOOR SPEAKERS ( BLACK )
SKU: AW70V6- BLK
The AW70V6 speakers are designed to add high quality, custom-tailored sound for distributed audio systems using either 70V or 100V amplification. With an easily adjustable weatherproof tap setting switch on the rear panel,
these versatile speakers even include a bypass setting to allow their use as high performance 6-ohm speakers.
Their 1” titanium dome tweeters combined in a ported-cabinet design with 6.5” injection-molded polypropylene
woofers, provide the audio quality that our customers have come to know and expect from Russound, while
rugged enough for even the most extreme outdoor environments.
Also available: AW70V6-WHT
Also available: KIT-ECS-650-PND6-WHT, KIT-ECS-650-PND4-BLK, KITECS-650-PND4-WHT
WWW.STAUB.CA/CAV
37
OUTDOOR TV
APOLLO ENCLOSURE FOR 70”-75” LED/LCD TV’S. ( BLACK ) & NON - ARTICULATING WALL MOUNT
SKU: PKG - AE7570BL- WM607NA
Weather resistant non-articulating wall mount with stainless steel
hardware. Tilt adjustable from 0° to 12°. Mount weight is 6.0 lbs. (2.7 kg).
Also available: PKG-AE4239BL-WM607NA, PKG-AE5046BL-WM607N, PKG-AE5550BL-WM607NA, PKG-AE6560BL-WM607NA
APOLLO ENCLOSURE FOR 46”-50” LED/LCD TV’S. ( BLACK ) & ADJUSTABLE HEIGHT CEILING MOUNT
SKU: PKG - AE5046BL- CM307
Weather resistant adjustable height, tilting and swivel ceiling mount with ceiling plate. Extension from 33.5” - 59” (850
to 1500mm). Tilt adjustable from -5° to 15°. Product weight is 14.65 lbs. (6.7 kg).
Also available: PKG-AE4239BL-CM307, PKG-AE5550BL-CM307, PKG-AE6560BL-CM307
APOLLO ENCLOSURE FOR 60”-65” LED/LCD TV’S. ( BLACK ) & ARTICULATING DUAL ARM WALL MOUNT
SKU: PKG - AE6560BL- AWM407
SUNBRITETV SIGNATURE SERIES OUTDOOR TV ( BLACK )
SKU: VARIOUS
The SunBriteTV Signature Series Outdoor LED HDTV is water-resistant,
resilient, and durable - guaranteed to function safely and effectively in a
wide variety of elements including rain, snow, extreme heat and cold, dust,
salt air and beyond. Its powder-coated aluminum exterior shields internal
components while the bright, full 1080p HD / LED anti-glare screen delivers
exceptional outdoor viewing quality. Made for permanent outdoor installation, SunBriteTV Signature Series TVs are perfect for partial sun and ambient
light installations. For applications where the screen will be exposed to
harsh direct sunlight, we recommend the SunBriteTV Pro Series. A heat dispersion system allows SunBriteTV Signature Series TVs to operate efficiently
in extremely low and high temperature environments (-24 degrees F up to
122 degrees F). Equipped with RS232 Serial Control with discreet On/Off and
Input. A rear IR receiver located in the cable compartment keeps IR emitter
hidden and protected. Cable hookups are easy with SunBriteTV’s weatherproof cable entry system. Thick gaskets form a compression seal around
cables, and the media compartment can accommodate many types of media
players and baluns. The weatherproof remote puts the power in your hands,
while a remote lockout feature prevents unauthorized users from changing
programming. For built-in sound, a weatherproof, detachable 20 watt speaker
bar is included (top or bottom mountable).
Available in the following sizes: 32”, 46”, 55” and 65” and colours: Black, Silver and
White
WWW.STAUB.CA/CAV
SUNBRITETV PRO SERIES DIRECT SUN OUTDOOR TV
SKU: VARIOUS
SunBriteTV Pro Series TVs are designed for full sun or active areas. Enjoy
the big game even on the sunniest of days. This device is direct sunlight
readable, featuring high-temperature Enhanced Solar Tolerance (EST)
technology to help guard against isotropic blackout - those annoying dark
spots that could appear over the screen when it faces the sun. This LED HDTV
also features a tempered glass shield that protects the LED screen in active
environments. Its powder-coated aluminum exterior shields internal components while the ultra-bright, full 1080p HD / LED anti-glare screen delivers
exceptional outdoor viewing quality. SunBriteTV Pro Series TVs have high
temperature tolerant, ultra-bright, professional-grade anti-reflective screens
to deliver clear images in brighter outdoor lighting conditions. A built-in
heating and cooling system allows the display to operate in temperatures
from -40 F up to 122 degrees F. Cable hookups are easy with SunBriteTV’s
weatherproof cable entry system. Thick gaskets form a compression seal
around cables, and the media compartment can accommodate many types of
media players and baluns. Media bay power port provides on-demand power
without the need for external cords ([email protected]/[email protected]). For built-in
sound, a weatherproof, detachable 20 watt speaker bar is included (top or
bottom mountable). Water-resistant, resilient, and durable, this TV is made for
permanent outdoor installation.
Weather resistant aluminum dual arm, full-motion, tilting wall mount with stainless steel hardware. Extension from 2.3”
to 18.5” (58.4 to 469.9 mm). Tilt adjustable from -3° to 10°. Mount weight is 23.7 lbs. (10.8 kg).
Also available in Dual Arm: PKG-AE7570BL-AWM407, PKG-AE5046BL-AWM407
Also available in Single Arm: PKG-AE4239BL-AWM207
Enclosure without TV
Available in the following sizes: 32”, 42”, 47” and 55” and colours: Black, Silver and
White
39
MOUNTS
STRONG RAZOR ARTICULATING MOUNT FOR
X- LARGE FLAT- PANEL TVS ( BLACK )
STRONG LARGE CEILING MOUNT FOR 36-60”
FLAT PANEL DISPLAYS ( BLACK )
STRONG X- LARGE FIXED MOUNT FOR MOST
55 - 80” FLAT- PANEL TV’S ( BLACK )
STRONG LARGE TILTING MOUNT FOR 36-60”
FLAT PANEL TVS ( BLACK )
STRONG CONTRACTOR SERIES ARTICULATING
MOUNT FOR 42 - 63” FLAT PANEL TVS ( BLACK )
STRONG UNIVERSAL FINE ADJUST PROJECTOR MOUNT ( BLACK )
SKU: SM - RAZOR- ART2-XL
SKU: SM - CEILING -T- L
SKU: SM - F -XL
SKU: SM -T- L
SKU: SM - CS - ART2- L
SKU: SM - PROJ -XL- BLK
Perfect for mounting a TV onto a single stud, the Strong
Razor Articulating Dual-Arm Mount for Flat Panel
TVs sits just 1.75” off the wall to provide an elegant,
low-profile solution. It features an easy-to-install, threepiece construction - meaning you don’t need a second
person to hang it - and its curved, cast-aluminum Razor
mount arms are not only lightweight and Strong, but
they look great too. This mount is full of custom AV and
installer-friendly features like post-installation leveling,
height, and tilt adjustments, this Razor mount makes
your install thinner - and your life easier.
The Strong Ceiling Mount with 1-½” NPT for Flat Panel
Displays feature integrated wire management, 1.5” NPT
connections, and a tilt up to 20° forward. Utilizing a
standard connection of 1-1/2” diameter schedule 40
pipe thread allows you to go to any home center or
plumbing center and get shorter or longer extensions if
they’re needed for your specific job. With plenty of room
to run wiring, installs stay clean with integrated wire
management. In through the ceiling, down through the
pipe, out of the bottom, and connect to the TV. Convenient and attractive.
The Strong Fixed Mount for Flat Panel TVs has a
slightly reduced weight rating, with the ultimate goal
of going slimmer. These mounts are only 1- 1/8” deep
for an extra low profile. Flat panels are getting thinner,
and so should the mounts holding them. Underneath
its beautiful black powder coat is 2.5mm of solid steel.
Strong fixed and tilt mounts now include LokTight
rotating lockable tabs directly on the arms themselves.
The lockable tabs keep the arms against the mount,
eliminate easy lifting from curious kids, and allows for a
locking device to be added for security measures.
As TVs get thinner and lighter, maximum holding
capacities decrease as a result. The Strong Tilt Mount
for Flat Panel TVs has a slightly reduced weight rating,
with the ultimate goal of going slimmer. But rest
assured, build quality was not compromised. Pick one of
these thin TV mounts up to feel the 2.5mm thick steel
used to make them, and notice the post-installation
leveling screws, built-on lockable tabs, and easy-to-use
wall plate to help make your custom AV job that much
easier.
With the Contractor Series, Strong provides AV installers
full-featured articulating mount solutions for budget-conscious jobs. With universal compatibility and
smooth full-motion adjustability, you’ll appreciate the
flexibility, professional-grade construction, and value
of this Strong Contractor Series Universal Articulating
Dual Arm Mount. Plus it’s easy to install and features
all-black hardware, integrated wire management, and
helpful post-install adjustments.
Equipped with longer mounting arms and security
screw holes, these projector mounts are specifically
designed to handle oversized models up to 50 lbs.,
including JVC projectors, while offering maximum installation flexibility. They feature tool-less adjustments
- so getting the ideal alignment is a breeze - and have a
simple three-piece design that minimizes time spent at
the top of the ladder. Also included is a plastic cover to
keep the install looking neat and tidy.
Also available: SM-CS-ART1-M and SM-CS-ART2-XL
Also available: SM-PROJ-XL-WH
Also available: SM-RAZOR-ART2-L
Also available: SM-CEILING-T-M
Also available: SM-T-M and SM-T-L
WWW.STAUB.CA/CAV
Also available: SM-T-M and SM-T-XL
41
PROJECTORS
SCREENS
DRAGONFLY 160 IN. MATTE WHITE PROJECTION SCREEN
WITH BLACK VELVET FRAME ( HDTV, 16:9)
SKU: DF - SL-160- MW
VIVITEK LARGE VENUE NEAR- SILENT LASER PROJECTOR (6000
LUMENS )
SKU: DU7090Z
With impressively vivid colors and a high brightness of 6,000 ANSI lumens,
the DU7090Z offers the next generation of advanced projection technology
— laser. Built lamp-free, it provides a low cost of ownership, with minimal
maintenance, and gives a stable, high-quality projection for up to 20,000
hours. The DU7090Z offers an immersive big-screen experience with an
unbeatable return on investment. The Vivitek DU7090Z provides the connections necessary for a large venue and many other enviornments: HDMI input,
3G-SDI, HDBaseT, BNC for YPbPr/RGBHV, VGA input for PC and Laptop, S-Video,
Composite video, IR input, Rs232c and 12V Trigger for screen automation.
» Advanced V-Color, dual-phosphor, laser light engine provides a
superior brightness and color uniformity to create the most
immersive, big-screen images possible today
» Quietest laser projector in its class at 33dB — in full power mode
» Lamp-less design delivers up to 20,000 hours of operational time,
in full power mode, with a 20,000 hour warranty
» 6,000 ANSI lumens and a 15,000:1 contrast ratio
These Dragonfly Matte White Fixed Screens are the go-to choice for
fantastic image quality. The matte white screen material makes every
seat the best. It’s engineered with a micro-diamond pattern that delivers
ultra-wide off-axis viewing so no matter where you’re sitting you get the
best performance. Reduced light “ripples” and glare create impeccable
color balance and translate to true-to-life, accurate reproduction. Every
fixed screen frame is hand-wrapped with VelTX™ black velvet, providing
an elegant finish that absorbs any overscan for the perfect viewing
experience. The beveled 3-1/4 in. aviation grade aluminum frame is
rigid, easy to assemble, and looks great too. This Dragonfly screen has
been engineered with SnaPerfect technology to provide quicker screen
attachment to the frame and an always-tight, wrinkle-free surface for a
lifetime of image perfection. From their high-quality screen material to
their quick-to-assemble, black velvet aluminum frame – these projection
screens guarantee a beautiful image with each use.
VIVITEK LARGE VENUE PROJECTOR (12,000 LUMENS )
SKU: DU9000
Specifically designed for Pro AV rental, staging and large venue applications,
the DU9000 projects a strong 12,000 Centered Lumens/11,500 ANSI Lumens
brightness and a 5,000:1 (with DB on) contrast ratio, while incorporating
a dual-lamp engine design for a brighter picture and operational reliability should one lamp go down. The projector comes with embedded 3D
edge-blending and warping technology, while sporting geometric correction
functionality for projection on curved surfaces, in addition to individual
corner correction. With a centered lens, motorized lens shift/focus/zoom and
four interchangeable lens options, the projector is primed for a greater variety of screen sizes, projection distance requirements, trouble free installation
and flexible positioning.
» Native WUXGA resolution (1920x1200)
» 12,000 ANSI Center Screen Peak Lumens, 10,600 ANSI Lumens ISO
21118 with a crisp 5,000:1 (with DB On)
» Powered zoom, focus and lens shift features for easy adjustment
and positioning flexibility
» Connectivity options: HDMI v1.4a, Component, RGB-In, 12V Trigger,
3D Sync-Out, 3GHD-SDI-In/Out, RS-232, RJ45/HDBaseT
Also available in High Contrast and AcoustiWeave
DRAGONFLY MOTORIZED 133” MATTE WHITE PROJECTION SCREEN (16:10 ASPECT RATIO )
SKU: DFM - NTT-133- MW-1610
VIVITEK LARGE VENUE PROJECTOR (8800 LUMENS )
VIVITEK LARGE VENUE PROJECTOR (8,000 LUMENS )
SKU: D8800
SKU: DU8090Z
The perfect solution for diverse large-venue applications, the Vivitek D8800
features native WUXGA resolution, HD-SDI connectivity, DLP/BrilliantColor
and dual-lamp technologies. Designed for video stacking, the D8800 features
centered optics with motorized lens shift, zoom and focus. The Vivitek D8800
offers six interchangeable bayonet lens options to match up with various
installation requirements. Featuring built-in edge blending and warping
capabilities, the D8800 can take you beyond its native aspect ratio and into
endless possibilities.
The DU8090Z features a WUXGA resolution, an amazing 8000 ANSI Lumens
brightness and 10,000:1 contrast ratio for a clear and bright projection. The
projector is equipped with a laser light source that offers up to 20,000 hours
of operation which makes it the perfect solution for large venues that need
power, flexibility and a durable solution.
» Native WUXGA resolution (1920 x 1200)
» Extremely bright at 8000 lumens with a 3000:1 contrast ratio
» Dual-lamp technology limits down-time
» Centered lens design
WWW.STAUB.CA/CAV
Ideal for conference rooms where computers with VGA outputs are used, this Dragonfly Motorized Projection
Screen has a 16:10 aspect ratio that effectively eliminates black bars and image over-scan. A premium screen
material is bonded to an inner layer of woven fiberglass that stiffens the material to help hold flat during
use. Matte White screen material is a great choice for applications where you have control over the ambient
light. It’s engineered with a micro-diamond pattern that delivers ultra-wide off-axis viewing – so no matter
where you’re sitting you get the best performance. With a 1.0 gain and 170-degree viewing angle it prevents
hot-spots and color shifts, while reducing light “ripples” and glare – all to create impeccable color balance and
a true-to-life experience. Each model comes standard with the most popular control types: RS-232, IR, 12V trigger, wall switch and contact input. Plus, we include a mounting bracket for the remote – so the customer never
has to search to find it. Add to that its ease of installation, whisper-quiet tubular motor, and a variety of control
capabilities - and you’ve got a projection screen that’s perfect for your next commercial installation.
» Native WUXGA resolution (1920 x 1200)
» DLP technology with BrilliantColor for vibrant and rich picture quality
» 8,000 ANSI lumens of brightness, WUXGA resolution, and 10,000:1
contrast ratio for clear, crisp and bright projection
» Single chip DLP Technology by Texas Instruments
* Some screen sizes are available by Special Order only.
43
LIGHTING & SHADES | CONFERENCE ROOM LAYOUT
Lutron solutions do more than just control the light in a space. With
the right design strategies, they can save substantial amounts of
energy, reduce operating costs, and improve productivity.
ENERGY SAVING STRATEGIES
» High-end trim (20% lighting)
» Occupancy or vacancy sensing (15% lighting)
» Daylight harvesting (15% lighting)
» Personal dimming control (10% lighting)
» Controllable window shades (10% AC)
» Timeclock scheduling* (variable)
POTENTIAL LIGHTING ENERGY SAVINGS
60%
* When scheduling is used without occupancy sensing or vacancy
sensing, 15% energy savings can be expected.
NEW ECOSYSTEM® H-SERIES BALLASTS
Cost-effective, digitally addressable 1%
dimming ballasts work with wired and
wireless sensors and controls—ideal for
any application, both retrofit and new
construction.
NEW RADIO POWR SAVR™ WIRELESS
DAYLIGHT SENSOR
Wireless sensor gradually dims lights
in response to the amount of available
daylight.
WWW.STAUB.CA/CAV
NEW PICO™ WIRELESS CONTROLS
SIVOIA® QS WIRELESS SHADES
Tabletop, handheld, or wall-mount
controls adjust lights or shades from
anywhere in the room.
Automated window shades move quietly
to eliminate glare and reduce heating
and cooling costs.
RADIO POWR SAVR™ WIRELESS
OCCUPANCY AND VACANCY SENSOR
Wireless sensor provides energy savings
by ensuring lights are off when rooms
are unoccupied.
NEW HI-LUME® A-SERIES LED DRIVER
The world’s first LED drivers to offer
smooth, continuous 1% dimming for
virtually any LED fixture—whether it
requires constant current or constant
voltage.
NEW GRAFIK EYE® QS WIRELESS WITH
ECOSYSTEM
Customizable preset light control with
built-in timeclock allows users to adjust
the lights and shades for any task and
save energy at the touch of a button.
45
LIGHTING & SHADES | PRESET LIGHTING BASICS
ZONES
A zone is a single light, shade, or grouping of lights or shades traditionally controlled by one
switch or dimmer. GRAFIK Eye® QS allows you to design each scene by adjusting the lights
and shades in a series of zones.
LIGHTING ZONES
Projection Screen (Zone S3)
Zone L2
Zone L5
Zone L6: CFL downlights
Zone L5: left LED downlights
Zone L4: right LED downlights
Zone L3: fluorescent wall wash
Zone L2: projection ELV downlights
Zone L1: fluorescent table pendants
Windows
Zone L1
Zone L4
SHADING ZONES
Zone S1: sheer shades
Zone S2: blackout shades
Zone S3: projection screen
Zone S1
Zone L3
Zone L6 Zone S2
SCENES
A scene is created by controlling the light level of any single
zone or grouping of zones to create the perfect lighting
environment for any task or activity. In this example we use a
conference room to explain how scenes are created throughout the day. Recall the setting with a touch of a button.
WWW.STAUB.CA/CAV
CONFERENCE
VIDEO
MEETING
A/V
During a morning conference, open
shades to allow daylight in and dim
lights to conserve energy.
Blackout shades are lowered to avoid
screen glare and lighting levels adjusted
to provide enough light for note-taking.
The lighting is focused on the conference table and sheer shades are lowered
to reduce direct daylight.
The room is darkened for a late afternoon A/V presentation without sacrificing task lighting on the table.
47
SURVEILLANCE
VISUALINT MINI MAXX SERIES NVR
SKU: VI - M -16-4000
Visualint’s Mini Maxx NVRs integrate perfectly with Visualint cameras. Use object-tracking analytics to detect
events and generate notifications, or to alert professional monitoring companies and consumers in real-time
when an event occurs. The user interface offers a virtual timeline, available via browser or HDMI Out, which lets
you quickly find events and export or download recordings. When analytic events are triggered or captured by
on-site cameras, each NVR writes metadata to the hard drive and tags it so you can specifically search recordings
by trigger type. This NVR is a trusted favorite, perfect for installers who want added security options along with
the most popular surveillance system features.
VISUALINT OUTDOOR IP AUTO TRACKING PTZ CAMERA WITH
VIRTUAL TECHNICIAN (3MP | WHITE )
VISUALINT OUTDOOR IP DOME CAMERA WITH VIRTUAL TECHNICIAN ( MOTORIZED | 4MP | WHITE )
SKU: VI - M -7230-VT
SKU: VI - M -4340-VT
SKU: VI - L-32-8000R
This 3MP Auto Tracking PTZ Speed Dome has 33x optical zoom. Incredible
auto-tracking capabilities allow you to follow objects through scenes for
better monitoring. It also comes standard with 16:9 letterbox sensors, glass
optics, one-touch auto focus and other convenient installation features.
Included Virtual Technician services even do the toughest legwork for you:
they set up port forwarding, event schedules, and email notifications for each
camera; configure analytics; and offer a follow-up calibration for any custom
install.
This 4MP motorized dome camera showcases high-res images at a full 25
frames per second. It also comes standard with built-in IR ranging from
30-50m, 16:9 letterbox sensors, glass optics, one-touch auto focus and other
convenient installation features. Included Virtual Technician services even do
the toughest legwork for you: they set up port forwarding, event schedules,
and email notifications for each camera; configure analytics; and offer a
follow-up calibration for any custom install.
The Line Series NVRs are a fantastic step up for installers who want analytics and security capabilities with full
control system integration. These video management systems feature a user-friendly interface, a smart search
function which lets you search tagged metadata, and Visualint viewer software. Buy a recorder with 4, 8, or 16
channels to start and add additional channel licenses as needed. It also supports over 4000 IP cameras from
ONVIF-certified manufacturers. Visualint’s consumer app for iOS and Android is ideal for commercial use, and can
be quickly set up for multi-site applications. Transcoding and connection optimization help customers navigate
the simple user interface with ease. They can view live camera recordings, playback past events, and check in at
any time.
VISUALINT LINE SERIES NVR
VISUALINT INTELLIGENT INDOOR IP MINI DOME CAMERA WITH STARLIGHT & VIRTUAL
TECHNICIAN (2MP | WHITE )
SKU: VI - M -1250-VT
With intelligent analytics that track distinct objects instead of light-based motion, this Visualint Intelligent Mini
Dome Camera was specifically designed for any small to medium-sized room. An advanced starlight color sensor
lets you see clearly down to 0.02 lux, plus, the camera features 16:9 letterbox sensors optimized for crystal-clear
images on any modern display; glass optics; one-touch auto focus and so much more. Included Virtual Technician
services even do the toughest legwork for you by professionally configuring the network, desired analytics, event
schedules, and email notifications for each camera.
VISUALINT OUTDOOR IP BULLET CAMERA WITH VIRTUAL TECHNICIAN ( MOTORIZED | 4MP | WHITE )
VISUALINT OUTDOOR IP BULLET CAMERA WITH STARLIGHT &
VIRTUAL TECHNICIAN ( MOTORIZED | 2MP | WHITE )
SKU: VI - M -3140-VT
SKU: VI - M -1550-VT
This 4MP motorized bullet camera showcases high-res images at a full 25
frames per second. It also comes standard with built-in IR ranging up to 30
meters, 16:9 letterbox sensors, glass optics, one-touch auto focus and other
convenient installation features. With an ultra-high definition 4MP CMOS
sensor, Visualint cameras can deliver true HD images up to 1280×720 at a
full 60 frames per second. When properly configured, embedded intelligence
analytics tracks objects and makes automatic picture adjustments using
seven main configurable rules, resulting in superior alert detection with 97%
less false alarms.
Featuring a 2.8–12mm motorized lens that’s adjustable from the GUI, this
bullet camera fits a variety of installs. It also comes standard with Visualint’s
ultra low-light color sensor for clear viewing at down to 0.002 lux, built-in IR
ranging up to 30m, 16:9 letterbox sensors, glass optics, one-touch auto focus
and other convenient installation features. With a premium 2MP CMOS sensor, Visualint cameras deliver true HD images with a resolution of 1920×1080
at a full 30FPS. They’re also true widescreen so they can provide a full landscape view of the action, optimized for modern displays and mobile devices.
WWW.STAUB.CA/CAV
VISUALINT OUTDOOR IP MINI DOME CAMERA WITH STARLIGHT & VIRTUAL TECHNICIAN
(2MP | WHITE )
SKU: VI - M -1350-VT
Designed for both indoor and outdoor applications, this IR dome camera features Visualint’s premium starlight
low-light color sensor for clear viewing at down to 0.002 lux, plus, it offers 16:9 letterbox sensors, glass optics
and other convenient installation features. With a premium 2MP CMOS sensor, Visualint cameras deliver true HD
images with a resolution of 1920×1080 at a full 30FPS. They’re also true widescreen so they can provide a full
landscape view of the action, optimized for modern displays and mobile devices.
49
SURVEILLANCE
FLIR 32 CH NVR WITH 16 POE, HDMI, [email protected], UP TO 4MP CAMERAS, 8TB
HDD, MOBILE, PC/MAC, CLOUD
SKU: DNR532P8
With sixteen integrated Power over Ethernet (PoE) inputs and PoE+ support, installation is made
simple. No programming or configuration is necessary as the NVR automatically discovers FLIR IP
Cameras on the network. Drive mirroring enables back-up recordings between up to four internal
hard disk drives, supports 4x SATA HDDs up to 4TB (16TB total), plus eSata support for four external drives to keep data secure. Real-time recording in Full HD per channel means turbo 200 Mbps
network bit rate, supports HD real-time recording with cameras up to 5MP and Pentaplex operation
- simultaneous view, record, playback, backup and remote monitoring. Set up remote viewing with
Flir Cloud in three easy steps: install FLIR Cloud app, scan QR code on DVR, view live video.
FLIR 8 CH NVR WITH 8 POE, [email protected], 2TB HDD, MOBILE, PC/MAC, FLIR CLOUD
SKU: DNR1182
FLIR’s DNR110 Series NVRs feature powerful high-speed HD recording. Installation is made simple with integrated PoE and
auto-detection of the cameras upon connection. With high bit rate processing, the NVR records at full resolution per channel
at real-time. Integrated PoE inputs provide for a quick, convenient connection with 4/8 integrated PoE ports, 50Watt total
PoE (up to 25W per channel) and auto-discovery of FLIR IP Cameras with no programming. This NVR supports SATA HDD
up to 4TB to back-up and keep data secure via 2x USB 2.0 ports. Flir Cloud provides quick and secure remote viewing with
access via iOS, Android, PC / Mac.
LUMA SURVEILLANCE 501- SERIES 16 CHANNEL DVR (2U )
SKU: LUM -501- NVR-16CH
This easy-to-use NVR is equipped with Power over Ethernet, 2TB of pre-installed internal storage, and supports up to 16 IP
cameras with a total bitrate of up to 100 Mbps. The 8- and 16-channel models have even been redesigned so they fit into our
shallowest racks. End users and installers alike will love the clean user interface. Rewind and fast forward, jump backward or
forward 15 seconds, pause, take a snapshot, playback, and zoom to your heart’s content. All of these options are easily controlled with a tap or a swipe. New IR/RS232/IP drivers have been created that control the NVR’s on-screen GUI through the
HDMI output. If you’re looking for video streaming to control systems, these NVRs are compatible with Control 4, Crestron,
ELAN g! & URC.
FLIR MINI P/T V.DOME, 2.1MP, [email protected],
3.6MM, POE / 12V, MICROSD, ONVIF, DU
FLIR MINI EYEBALL DOME, 1MP, [email protected],
3.6MM, IR LED’S, POE / 12V, ONVIF, DU
LUMA SURVEILLANCE 700 SERIES BULLET IP
OUTDOOR CAMERA WITH HEATER ( GREY )
SKU: N233ZD
SKU: N133ED
SKU: LUM -700- BUL- IPH - GR
Available in 1.3MP/2.1MP configurations, the FLIR HD
Micro PT IP cameras offer the most compact pan/ tilt
viewing solution at outstanding value. Provides ±180°
pan range / 2°~90° Tilt, 100°/sec max rotation speed,
25 presets. With a miniature and discreet form factor at
2.2”/57mm height and 5.1”/130mm diameter, the Micro
PT packs impressive performance with HD picture
quality, Edge storage, 100°/s rotation speed, built-in
microphone, plus rugged IK10 and IP66 vandal and
weatherproof housing.
Available in 1MP / 2.1MP / 3MP configurations, the FLIR
Fixed IR Dome IP Cameras offer HD picture quality in
real time with outstanding night vision capabilities.
Installation is made easy with PoE operation included.
Built rugged, FLIR’s Fixed IR Dome IP Cameras are
suitable for both indoor and outdoor installations (IP66
rated), cold climates (-22°F/-30°C) and true day/night
with ICR, 2D-DNR, D-WDR. The N133Ed features 2.1MP
HD, 1080p @ 30/25fps, 1/3” CMOS, 3.6mm lens and
65ft/20m IR.
Also available: N233BE, N233EE
Also available: N133BB, N133BD, N133EB
With enhanced IR range and comprehensive zoom
capabilities, the 700-series cameras were built to zoom
in and glimpse minute details up close and personal, or
view long range footage from afar. The built-in heater
prevents condensation in warm environments or frost
on the lens in icy conditions. At 4MP, these cameras
offer crystal-clear digital images and deliver two times
the resolution of normal 1080p. Motorized zoom and
focus at the camera user interface means you can
have an easy installation. Just point the camera in the
right direction while on the ladder, and then make any
adjustments or fine-tuning using your computer.
Also available: LUM-700-BUL-IPH-WH, LUM-700-DOM-IPHWH, LUM-700-DOM-IPH-BL
LUMA SURVEILLANCE 500 SERIES DOME IP OUTDOOR CAMERA ( BLACK )
SKU: LUM -500- DOM - IP - BL
LUMA SURVEILLANCE 501- SERIES 8 CHANNEL DVR (2U )
SKU: LUM -501- NVR-8CH
This easy-to-use NVR is equipped with Power over Ethernet, 1TB of pre-installed internal storage, and supports up to 16 IP
cameras with a total bitrate of up to 100 Mbps. The 8- and 16-channel models have even been redesigned so they fit into
our shallowest racks. Plug & play capabilities make setup a breeze. Thanks to PoE, you can power your camera directly at the
NVR without having to mess with a separate power source. Organize addresses, port-forwarding addresses, DDNS names, devices by location, and much more using the handy mobile integrator app. Through OvrC, you can even access customer UIs by
selecting the appropriate device from a list. Plus, you’ll receive real-time notifications for new firmware and perform updates
with a single tap. The Luma mobile app is built using the same intuitive design as the desktop UI, so you can continually
provide peace of mind to your clients with on-the-go updates —anytime, anywhere.
WWW.STAUB.CA/CAV
At 4MP, these cameras offer crystal-clear digital images and deliver two times the resolution of normal 1080p. Using a
display designed for 1080p – now you get twice the digital zoom. Optimized for 16:9 letterbox format, and thus tailor-made
for the A/V market, the resolution built into these cameras prevents picture distortion. Watching crystal clear video on the
go just got better, thanks to free apps for iOS and Android, as well as streaming video drivers for popular control systems.
Created with a strong IR capability, the 500-series IP cameras were specifically designed to showcase wide-angle views that
need to be shown in a single frame.
Also available: LUM-500-DOM-IP-WH, LUM-500-BUL-IP-GR, LUM-500-BUL-IP-WH
51
CELLULAR SIGNAL
SURECALL FORCE5 80DB IN - BLDG RECONFIGURABLE WIRELESS MULTI - BAND AMPLIFIER
SKU: SC- CM5000
The SureCall Force5 is a high-quality bidirectional cell phone signal booster that enhances cellular signals to
areas that are prone to weak cellular coverage. The Force5 is an alternative solution to a DAS at a fraction of the
cost. Force5 increases signal strength for voice, text and 4G LTE on all North American cellular carriers. Force5 is
a complete enterprise solution designed for large buildings 25,000+ square feet, supporting 100+ simultaneous
users. The Force5 booster features sturdy metal construction and an industry leading 3-year warranty. Optional
5-year extended warranty is also available. Force5 boosters include the SENTRY Remote Monitoring and Control
System for optimizing when located off-site.
SURECALL FUSION5X BOOSTER ONLY UP TO 20,000 FT
SKU: SC- POLYXH - O -72
Designed for buildings up to 20,000 square feet, the SureCall Fusion5X increases voice, text and 4G LTE signals
for 20+ simultaneous users on all carriers in North America. Configurable for all indoor environments, the
Fusion5X reduces dropped and missed calls and improves 4G LTE data speeds to ensure everyone has a reliable
connection to their mobile device. The Fusion5X booster features sturdy metal construction and an industry leading 3-year warranty. Fusion5X doesn’t feature attenuation knobs, instead, sophisticated software automatically
and continually optimizes gain ensuring the booster is always operating at maximum performance. Fusion5X kits
include (4) internal antennas which provide the flexibility to customize your installation to meet the needs of
any large building or challenging floor plan.
SURECALL FUSION5 72DB FIVE - BAND MANUALLY ADJUSTABLE BOOSTER KIT FOR AREAS UP
TO 6,000 SQ. FT.
SKU: SC- POLYH - O - CA-YD - KIT | SC- POLYH - O - CA-YP - KIT
Fusion5 is a cellular booster solution that’s ideal for offices where reception is weak due to distance from towers,
the topography, building materials or structural design. This is a complete solution that covers all major Canadian and US carriers, and with the fastest 4G speed it’s perfect for a fast-paced office. This competitively priced
booster easily covers areas up to 6,000 square feet, with up to 10 simultaneous users and is configurable for all
indoor environments. A built in safeguard completely eliminates interference to cell tower and the high quality
filters and parts provide superior performance, higher power and longer life. Independently reconfigurable for
each band, the Fusion5 supports 2G and 3G voice and 4G data standards. All Fusion5 kits include low dB loss
SC-400 coax cable.
SURECALL SIGNAL METER FOR 1930-1990 PCS; 869-894 CELLULAR; 2110-2155 AWS; 746-757 LTE
SURECALL FULL BAND DOME ANTENNA - 3 TO 4DB ( INCLUDES
MOUNTING KIT, 700 & 2700 MHZ )
SKU: SC- METER-01
SKU: SC-222W
The SureCall RF signal meter measures RF signal for 4G LTE for every major
carrier and 2G-3G PCS/Cellular frequencies. It features a digital LCD readout
for each band. Use the meter to receive and measure an outside RF wireless
signal from the air, an installed outdoor antenna or directly connect the field
antenna. Unit can also be used to measure signal loss in long cable installation runs. An amazing tool used to determine an ideal location to install
outside antennas and achieve optimal signal booster coverage installation.
The built-in display shows you which band you’re measuring, if any block is
selected, and the signal strength in decibels. The meter is highly sensitive
and can detect signals as weak as -110 dB. The meter includes 4 AAA rechargeable batteries which can power the meter for up to 2.5 hours.
This full band dome antenna is designed to be unobtrusive with a low profile
that blends easily with your internal environment. The full band antenna
is designed to cover 2G/3G/4G and WLAN systems for Cellular, PCS, AWS
and LTE frequencies. This ceiling mount antenna transmits and receives to
cell phones with a 360 degree beamwidth. The CM222W multi band plastic
antenna is an omni-directional interior antenna that gathers signals from
all sides and does not need to be pointed toward a cellular tower. Range of
antenna is dependent on physical obstructions, power generated by booster/
amplifier and reception from outside signal received and distributed by outside antenna. Besides the antenna itself, parts include mounting equipment
for either a flat horizontal surface or a wall. It should be mounted in an
upright position for best results.
Available Kits:
» Model SC-POLYH-O-CA-YD-KIT: Outside Yagi Antenna with inside dome antenna, 50’ x 75’ coax cable
» Model SC-POLYH-O-CA-YP-KIT: Outside Yagi antenna with inside panel antenna, 50’ x 75’ coax cable
SURECALL FLEXPRO 72DB DUAL- BAND MANUALLY ADJUSTABLE BOOSTER KIT FOR AREAS UP
TO 6,000 SQ. FT.
SKU: SC- DUALH - O -72-YD - KIT | SC- DUALH - O -72-YP - KIT
The SureCall FlexPro cell phone signal booster increases cellular signal strength for voice and text for all North
American cell carriers. FlexPro delivers unrivaled performance with cutting-edge technology, reducing dropped
and missed calls and extending battery life for multiple simultaneous users. These competitively priced booster
kits produce enhanced 2G and 3G voice and data reception for areas of 100 feet up to 6,000 square feet where
reception is weak due to distance from tower, topography, building materials or structural design. Fully configurable for all indoor environments. The SC-400 coax cable is certified at the optimum length to ensure maximum
performance with minimal loss and the built in safeguard completely eliminates interference to cell tower. All
FlexPro kits include low dB loss SC-400 coax cable. FlexPro Standard kit model SC-DUALH-O-72-OD-Kit includes:
outside Omni antenna, inside dome antenna, 30’ and 75’ CM coax cable
Available Kits:
» Model SC-DUALH-O-72-YD-KIT: Outside Yagi Antenna with inside dome antenna, 30’ and 75’ coax cable
» Model SC-DUALH-O-72-YP-KIT: Outside Yagi antenna with inside panel antenna, 30’ and 75’ coax cable
WWW.STAUB.CA/CAV
SURECALL FULL BAND PANEL ANTENNA - 7 TO 10DB ( INCLUDES
MOUNTING KIT, 698 & 2700 MHZ )
SKU: SC-248W
The SC-248W Panel Antenna is a compact directional antenna designed to
cover 2G/3G/4G/and WLAN systems for Cellular, PCS, AWS and LTE frequencies. It’s a high gain indoor antenna suited for places where the signal needs
to be broadcast over a wide area. This wall mount antenna transmits and
receives to cell phones with a 45° beamwidth. Designed for indoor use and
best mounted on the wall or in a corner to provide the best coverage, this antenna also features full band (698 - 2700 MHz) broadband and 7-10 dB gain.
SURECALL FULL BAND 2 WAY SPLITTER
SKU: SC- WS -2
The Surecall 2-way splitter allows for two individual indoor antenna to be
used with a single outdoor signal amplifier. These compact, small-footprint
splitters utilize excellent build quality to reduce interference and insertion
loss, isolate outputs effectively, and deliver great all-around value. Antenna
connection on inside allows a signal loss of ≤ 0.4 dB. Sure-Call SC-WS-2 full
band caters for LTE, AWS, Cellular and PCS band systems within the 698 MHz2700 MHz range. It is made within international standards with steel metal.
Maximum power for the two-way splitter stands at twenty watts.
53
RACK PRODUCTS
STRONG CUSTOM SERIES 42U FLOOR
STANDING RACK WITH FINE FLOOR
CASTERS (24’ DEEP )
SKU: SR- CUSTOM -42U -24IN
Installation is a breeze with the new Z-Lock
technology rack rails. The new design gives the
rack a much sturdier and stronger stance – and
enables a smoother, more efficient assembly that
can be completed in no time. Custom Series Racks
come standard with a skirted base that features
preinstalled fine floor casters. Streamlined-look
casters have all the functionality of the older
models with the casters moved outward for a
more balanced rack. Leveling feet are also included for an all-in-one secure rack base solution.
Other installer-centric features include integrated
slots and knockouts for wire management, fan top
bracket attachments, and a gangable side-by-side
design—even offering multiple holes on the rails
for mounting accessories.
POWER & PROTECTION
STRONG CUSTOM SERIES RACK DOOR
42U H2- GLASS
SKU: SR- CUST- DOOR-42U - GLS
Having a see-through door serves a practical purpose; it keeps unauthorized users away from the
equipment, while allowing you to monitor system
components. The rack door’s tinting also reduces
the intensity of LEDs making them more subdued
in dimly lit applications. Custom Series rack doors
do not need side panels for installation, so you
can add doors without side panels and create a
nice look for cut-in installs. Features stainless
steel construction, reversible and front and rear
mountable, and lock and keys.
WATTBOX RACK MOUNT OVRC UPS - 2000 VA
SKU: WB - OVRC- UPS -2000-1
The WattBox Uninterruptible Power Supply (UPS) is
packed with features to help keep vital equipment up
and running in the case of power loss. This Pure
Sinewave UPS provides battery backup and full
automatic voltage regulation (AVR) to prevent costly interruptions,
as well as a ‘Graceful Shutdown’ of a connected PC via USB port. By using the single
outlet to back up a WattBox IP power conditioner, you can receive system OvrC updates, which allow you to
monitor power and perform basic functions like load shedding configuration. With this model, you’ll get a 2000 VA capacity, up to
5:30 min of battery backup at full load (1560W), and 15:30 minutes of
battery backup at 45% load (720W).
Also available: WB-OVRC-UPS-1500-1, WB-OVRC-UPS-1100-1
Also available in 21U, 27U, 32U and 37U and in Solid
Steel Door
Also available in 21U, 27U, 32U and 37U and 20”
depth
STRONG CUSTOM SERIES RACK SIDE
PANELS 42U (24” DEEP | PAIR )
SKU: SR- CUST- SP -42U -24
Locking side panels provide added security and
also dress up the rack by hiding its contents, while
powder-coated steel provides a durable fit and
finish. Vents placed in the panel bottom even
allow for a more efficient chimney-style exhaust
ventilation that allow cool air to enter and hot air
to exhaust out of the top. Panels are easily moved
with the pins on the panels that slide into keyhole
slots, while a built-in handle lends a helping hand
during installation and removal. Each side panel
can easily be locked to prevent system tampering.
Also available in 21U, 27U, 32U and 37U and 20”
depth
STRONG 16U WALL MOUNT RACK SYSTEM
SKU: SR- WMS -16U
For installs needing equipment locked up and off
the floor, this fully assembled Strong Rack System
is an installer’s dream. It arrives fully assembled,
ready to go with a swing kit, vented top and
base, reversible, tinted, tempered glass door, and
removable side panels. Reversible steel hinge pins
provide reliable swing and sag resistance up to
150 lbs., while locking latches on the front door,
side panels, and swing kit keep prying hands out.
A welded design provides rugged reliability, and to
top it off, knockout panels and marked rails make
for simpler wire management.
Also available in 10U and 12U
WATTBOX UPS 2000VA PURE SINEWAVE (8 OUTLETS )
SKU: WB - UPS -2000-8
This Pure Sinewave UPS provides 8 outlets of battery backup and full
automatic voltage regulation (AVR) to prevent costly interruptions, as well
as a ‘Graceful Shutdown’ of a connected PC via USB port. With this model,
you’ll get a 2000 VA capacity, up to 5:30 min of battery backup at full load
(1560W), and 15:30 minutes of battery backup at 45% load (720W). Features
a multifunction LCD readout that provides ready access to power/battery condition vitals such as Runtime and Load. Plus, it incorporates an auto-dimming
function, which helps minimize distractions when in use.
Also available: WB-UPS-1500-8, WB-UPS-1100-8
WWW.STAUB.CA/CAV
WATTBOX IP+ 12- CONTROLLED OUTLET CHASSIS POWER
CONDITIONER WITH AUTO REBOOT
SKU: WB -700CH - IPV-12
Get all the features and functionality you love about the innovative WattBox
IP+ line in a chassis form factor perfect for cabinet and shelf mounting.
This WattBox offers easy access with full control of all 12 outlets, and has
a front panel with voltage/current displays and utility outlets for charging
peripherals. With the sequencing feature you can individually control and
sequence all 12 outlets. You can even do timed sequencing – anywhere from
one second to five minutes – through the product’s sophisticated programming schedule. It’s smart enough to automatically reboot an attached device
when network connectivity is lost, provides premium surge protection and
noise filtration. Add remote access, scheduling and email – and you can say
goodbye to unnecessary service calls. Plus with OvrC enablement, you get
remote access, remote firmware updates, real-time monitoring, and customer
management all from your phone, computer, or tablet.
55
WIRE & CABLE
WIREPATH BULK WIRE & BINARY CABLE
ICE CABLES
CLEERLINE NON-STRIP OPTICAL FIBER
PLANET WAVES TOOL-LESS CONNECTORS
Wirepath Bulk Wire and Binary Cable manufactures bulk wire and cable for audio
and control, speaker, coaxial, security/fire, category, RGB, plenum and riser as well
as bundled wire.
Ice Cable manufactures high-quality cable, including Speaker Cable, Category/
Data Cable, Coaxial/Video Cable, Alarm Wire, Structured Wiring, Plenum Cables,
control cables and cables for specialty systems.
Cleerline advanced optical glass fibers are much stronger, safer, and faster at terminating than typical fibers. This duplex style cable provides the ultimate in durability and bend with ease of termination. Cleerline fibers are always protected at
the glass level as a result of their integral polymeric coating, increasing both bend
and tensile strength to unprecedented levels. Cleerline fibers are compatible with
all common connector systems on the market for standard 50/125 multimode and
9/125 Singlemode fibers.
Planet Waves’ Cable Station solderless connectors and high definition cables are
designed for the custom installer.
IT’S ALL IN THE BOX
Tough, high-quality wire deserves a tough, high-quality package. The new Wirepath Bulk Wire box has been re-designed to be more durable and installer-friendly than ever before. From stronger, more durable reinforced handles, to a tangle
window that you’ll probably never have to use, to a wide-mouth payout tube that
lets you access your wire without breaking a pinky, the packaging makes your job
easier. As an added bonus, it’s water resistant, tape-free, and practically indestructible.
NO MORE TANGLES
Wirepath Bulk wire is coiled with patented REELEX® technology to eliminate
tangles. Each coil is tangle-free and kink-free so you’re left with a smooth, easy
pull that won’t give you a headache.
INSTALLER- FRIENDLY
Sequential distance markings, anti-snag dispensing slots and easy-to-strip jackets
make Binary and Wirepath Bulk Wire cable a breeze to work with.
CMP/PLENUM RATED WIRE
This wire has been tested by UL and meets the standard of CMP, or plenum. As
such, it is permitted for use with all in-wall,
plenum, and riser applications. If
your job does not require these
specially-rated cables, you may
want to consider their CMGRated counterpart as an
alternative.
OXYGEN - FREE COPPER
CABLES
Only 99.9997% oxygen free
conductors are used in the cable
to ensure signal integrity and a
lifetime of performance. Oxygen
Free Cables (manufactured in an
oxygen free environment) drastically
reduces signal distortion for unrivaled audio
clarity using 99.9997% oxygen free conductors.
WET SLICK JACKET
The most popular control cable SKUs, 18-2EPS, 22-2EPS, 22-2OS and 22-4OS have
been upgraded with 10009 PVC compound. This gives the cable a shiny look and a
slick feel, resulting in less friction, easier pulls and more flexibility than a standard
PVC jacket.
ILABEL
iLabel is a print legend to help you identify and pre-mark your cable for each
room, wall and jack location. All ICE cables come pre-printed with location and
application information that can be circled with a felt-tipped pen.
FOOT MARKERS
Foot markers show how much cable has been used and how much is left, and are
printed every two feet on all ICE cables. This reduces waste and makes the best
use of the cable remaining in each box or spool as you know exactly how much
you have left before you pull the cable.
BMP – BIG MOUTH PAYOUT
BMP boxes feature a new type of coil payout that’s 20 times larger and results
in an exceptionally quick and efficient payout while improving productivity. The
figure-8 wind cancels out recoil, back-twist, kinks, and even
knots to allow the cable to easily pull from the
package.
HDBASET CERTIFIED CAT 5E AND
CAT 6
With cable certification, you can rest
assured knowing your installation is
ensured to have full product
interoperability and compliance.
EZ STRIP TISSUE
A thin layer of tissue is placed around
the conductors – under the outer
jacket – making the cable much
easier to strip. Once the jacket is
scored, it slides off easily, with no effort.
» Cleerline fiber achieves unprecedented mechanical strength and durability,
providing more reliable connections and longer service life
» The glass fiber is never exposed to the elements. Not having to strip the
integral acrylate/polymer or buffer coating means tools never fracture the
glass, the glass is never exposed, and the end product is more stable with less
long-term defects
» Cleerline fiber is designed for ease of use and safety due to incredible
flexibility of the fiber soft tissues are protected at all times during the
termination process
» Incredible bend longevity with Nd = 30 assured for up to 10,000X increased
bend over typical glass fibers
» Ultra low attenuation loss on tight bend radius
» SSF exclusive “Soft Peel” 250um jacket identifier
» Reduced tooling required for termination
» Incredible tensile strength allowing for ease of installation and superior
fatigue value
Cleerline SSF fiber optic cable’s proprietary 3M integral coating simplifies many of
the critical processes involved in the termination of fiber optic cable. Unlike all
other types of fiber cables, with SSF fiber the user no is longer required to strip
the acrylate “buffer” 900μm coating. SSF is the next generation of fiber optics
with an Nd rating = 30, providing up to 10,000 times the bend and 400 times the
pull force of standard or bend insensitive fibers. With a more
reliable cable and much
easier installation, the
installer is also able to quickly
terminate mechanical splice style
connections as the SSF fiber is easy safe to handle,
reducing termination times by up to 50%. SSF supports all
broadband applications and complies with the most stringent industry standards.
No stripping, no crimping, no soldering required! BC Series RCA connectors are one
piece, all nickel-plated connectors designed to work specifically with Planet Waves
3/16” coaxial cable. Terminate in 3 simple steps: just cut, twist, & screw. Each pack
comes with extra colored rings for color-coding connectors by application.
Planet Waves BC connectors offer an alternative to those who demand quality but
operate in more price-sensitive markets.
» Nickel-plated contacts
» Standard nickel chrome finish
» Quality connectivity at a more affordable price
FAST 3- STEP TERMINATION
Leave the clunky stripping and crimping tools at home. Simply cut the end of the
cable, twist on the connector, and tighten down the set screw. It cleanly penetrates
the outer jacket to provide superior contact for the life of the connector. And you
can do it all using just one small, lightweight Cutter/Screwdriver Tool Kit.
COMPLETELY REUSABLE
If you happen to end up with an imperfect termination – which is highly unlikely –
instead of cutting the connector off and eating the cost of it, with Planet Waves you
just back out the set screw, cut the end of the cable, and start over.
PREMIERE BACK- OF - RACK SOLUTION
When you have a lot of rack components that need to be connected, using bulky
RG59 or RG6 cabling can get pretty messy. The Planet Waves line of ultra-slim
cabling, connectors and accompanying tools allow professionals to deliver a clean,
polished back-of-rack solution. Shallow
connectors and Y adapters with
customizable leg lengths pair with
super thin and flexible coax cable to
make tight turns and
neat terminations
where you need
them most.
Automation Cable from Ice Cable is available in multiple
combinations such as (1) 18 gauge, 2 Cond. + (1) 22 gauge,
2 Cond. w/ Shield & Drain (SKU: ICE-LUTRON-XXXX)
WWW.STAUB.CA/CAV
57
CORPORATE DIRECTORY
CEO
President
Senior Director of Merchandise & Operations
Director of Sales & Business Development
National Sales Manager Commercial AV
BUSINESS DEVELOPMENT TEAM
Dave Mason
Scott Trotter
William Woo
Bryan Sack
Keith McCrea
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
ext. 308
ext. 307
ext. 106
ext. 603
Strategically located throughout the country, our field business development managers provide critical support to our dealers across Canada.
Keith McCrea
Ph. (416) 704.7386 Em. [email protected]
Jeff Litke | British Columbia
FINANCE
Financial Controller
Accounts Payable
Accounts Receivable
Derek Wong
Cheryl Wei
Annie Li
[email protected]
[email protected]
[email protected]
ext. 401
ext. 403
ext. 402
Ph. (604) 202.6643 Em. [email protected]
Benjamin Riboreau | Alberta
Ph. (780) 893.4850 Em. [email protected]
INVENTORY
Merchandise Planner
Merchandise Planner
Merchandise Analyst Josh Lastimoza
Arnel Santos
Billy Kato
[email protected]
[email protected]
[email protected]
ext. 304
ext. 309
ext. 301
Ph. (204) 996.6483 Em. [email protected]
Matt Daub | Ontario
CLIENT SERVICES
Client Services Manager
Senior AV Sales & Technical Specialist
Client Services, 12v Specialist
Client Services, AV Specialist
Client Services, AV Specialist - CTS
Client Services, Quebec Market
Ian Laker | Saskatchewan, Manitoba
Mani Purewal
Tom Mah
Justin March
Jatinder Sandhu (JS)
Sean McGuigan
Stephane Gendron
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
ext. 104
ext. 107
ext. 101
ext. 103
ext. 109
ext. 108
Media Manager
Marketing Coordinator
Jason Miller
Mary Quinn
[email protected]
[email protected]
ext. 302
ext. 303
Web Content Administrator & Graphic Design
Karen Ballesteros
[email protected]
ext. 305
Ph. (519) 533.8050 Em. [email protected]
Stephane Gendron | Quebec, Maritimes
Ph: (514) 416.2211 Em: [email protected]
MARKETING & MEDIA
SERVICE, SUPPORT & TRAINING
Warranty & Technical Support Manager
Colin Moskaluke
[email protected]
ext. 202
Senior AV Sales & Technical Specialist
Brian Crowe
[email protected]
ext. 102
12V/AV Support Specialist & Warranty Paul Kaiser [email protected]
ext. 204
Warranty
[email protected]
ext. 201
LOGISTICS
Warehouse Supervisor
Jeremiah Dartnell
[email protected]
ext. 507
Shipping
[email protected]
ext. 501
Receiving
[email protected]ca
ext. 502
OUR LOCATION
Address
Phone
#160 11791 Hammersmith Way
Richmond, B.C. V7A 5C6
(888) 470.2211 Toll-Free
(604) 270.7316 Local
Email
Fax
[email protected] WWW.STAUB.CA/CAV
Order Desk
(888) 844.7316 Toll-Free
(604) 276.8098 Local
59
WWW.STAUB.CA/CAV
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement