Audiovox Alarm Clock Radio with CD Player User manual
Below you will find brief information for Alarm Clock Radio with CD Player null. This device combines an AM/FM radio, a CD player, and an alarm clock with dual alarm settings. It features a sleep timer, snooze function, and the ability to program CD playback. You can set alarms to trigger with the radio, CD player, or a buzzer. The display shows time, radio station, CD track number, and alarm settings. The unit is easy to use and offers many different functions to provide the perfect wake up experience.
PDF
Download
Document
Advertisement
Advertisement
COMPACT DISC PLAYBACK 1. Press the STANDBY button to turn to function mode. 2. Press OPEN button to insert a CD into the slot with printed side facing upward and close the door. 3. Press the FUNCTION button to select CD mode. After loading the CD, total tracks of the disc will be shown. Tracks Skip - Skipping To The Previous or Next Track • Press the track. • Press the • Press the button once to return to the beginning of the current button repeatedly to skip tracks backward one by one. button repeatedly to skip tracks forward one by one. button to begin play. Note: LCD display will return to Clock mode after about 15 sec with no further operation. • Press the button. • To resume playback, press the button again. 3. To cancel repeat play, press the PRESET/REPEAT button until “REPEAT” icon disappears from the display. To Stop Playback • Press the button. To Remove the Disc • Press the OPEN button and take the CD out. To Review CD Track No. • Press to review CD track no. Note: This operation will cause instant stop of track playing. Track Search - Locating a Particular Point In a Track • Keep the or desired point. 1. To repeat the same track, press the PRESET/REPEAT button until “REPEAT” icon lights up on the display. 2. To repeat the disc, press the PRESET/REPEAT button until “REPEAT ALL” icon lights up on the display. To Interrupt Playback button pressed during play and release at the Note: LCD display will return to Clock mode after about 15 sec with no further operation. Program Play Program play allows the selected tracks play in desired order. Program function can only be operated in stop mode. 1. Turn on the power and press the FUNCTION button to select CD mode. -9- WAKE UP TO ALARM (TUNER,CD OR BUZZER) The TUNER, CD or BUZZER automatically sounds at the designated time everyday. You can set two different kinds of alarm time, one for ALARM 1 and the other for ALARM 2. 4. To add additional tracks, repeat setp 2 ~ 3. Notes: • Check the program order. • Press MEMORY/SET button repeatedly. • To stop program play, press STOP button or select other function by pressing FUNCTION button. • The same track can be selected more than once in the same program. • A maximum of 20 tracks can be programmed. • With program on, the or skip function is available only for the selected tracks. • REPEAT play can be performed during program play. CONNECTING HEADPHONES Connect headphones (Dia. 3.5mm stereo mini plug) to the PHONE jack. When the headphones are connected, speaker sound will be automatically disconnected. When the designated alarm time comes, the selected sound source (TUNER, CD or BUZZER) will be triggered and the ALARM symbol will start to flash. Turn Off the Alarm 2. Press ALARM 1 button until “ ” and alarm time start to flash. To turn off the alarm, press STANDBY, ALARM 1 or ALARM 2 button. The alarm will go off instantly until the same time next day. Important note: In case of wake up with TUNER or CD, no other operation such as CD Stop can be made until turn off the alarm by pressing STANDBY, ALARM 1 or ALARM 2, and then change the unit to TUNER or CD mode for further operations. To Review the Set Alarm Time • Press ALARM button while the unit is in power off. button to adjust hour. CARE AND MAINTENANCE General Guidelines • Do not touch the laser lens on the CD player. • Temperature changes may cause condensation on the laser lens. If condensation forms on the lens, leave the unit for about an hour until condensation evaporated. • Do not leave the unit exposure directly under sunlight or extreme heat such as inside a car parked in the sun. This can cause damage or malfunction. • To prevent dust from reaching internal components, do not leave compartment door such as back up battery door opened at all time. • Do not cover unit with cloth. Handling of Compact Disc • Although the music tracks in the disc are covered with enclosure, it is still advisable to treat the disc carefully. Always pick up the disc by the edge and put them back in the holders immediately after use. • Always wipe the compact disc from centre to the edge of disc with a piece of velvet or soft dry cloth. To Cancel Alarm Mode 4. Press button to adjust minute. • Press ALARM button until all wake up modes (TUNER, CD or BUZZER) disappear from the display, then press MEMORY/SET button to confirm. Snooze 5. Press MEMORY/SET button to confirm Alarm 1 wake up time. And “ ” appears on the display which means ALARM 1 has been set. - 12 - • Press SNOOZE button allows you to enjoy another 5 minutes’ sleep. Alarm will be on again after 5 minutes of each press of SNOOZE button until STANDBY, ALARM 1 or ALARM 2 button is pressed. - 13 - INSTRUCTION MANUAL For best results, please read this manual carefully before using the unit. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. TO AVOID ELECTRICAL SHOCK, DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. - 11 - Alarm On with Tuner, CD and Buzzer 1. Press STANDBY button to return to clock mode. 3. Press or button to select the desired track. Then press 3. Press MEMORY/SET button to store the track in memory. - 10 - Setting Alarm 1 (Same As Setting ALARM 2) Note: If ALARM 1 button is pressed again, this operation will go cycle until wake up mode (TUNER, CD or BUZZER) is confirmed by pressing MEMORY/SET button. Alarm Clock AM/FM Radio With CD Player Repeat Play This function will allow a single track or all tracks on the disc to be played repeatedly. REPEAT function can be operated when playing a disc. 4. Press the 2. Press MEMORY/SET button (in stop mode), first “2”will appear for about 2 seconds and then “” will flash on the display. RADIO Problems Poor FM reception Poor AM reception • Make sure FM antenna wire is fully extended. • Electrical interference in your home can cause poor reception. Move the unit away from them (especially those with motors and transformers). • Rotate the unit horizontally. CLOCK Problems Solutions Clock does not show the correct time. Alarm does not come on at the preset time. TROUBLE SHOOTING GUIDE CD Problems System does not turn on. Disc in place but unit won't play. Solutions • There has been an electrical power interruption. To turn on the TUNER, CD or BUZZER alarm, check the following points: • Is the current time correctly set on the time display? Check the AM/PM indication. • Is the alarm time correctly set? Check the AM/PM indication. • Is the desired station tuned in? SPECIFICATIONS Solutions • Make sure the STANDBY button is set to ON. • Make sure press the FUNCTION button to CD mode. • Make sure disc is clean and undamaged. • Make sure printed side of disc is facing up. • Make sure PAUSE mode is not activated. - 14 - Power consumption: 8W Power requirements: AC 120V - 60Hz DC 9V Specifications are subject to change without notice. Printed in China 811-308091-010 PRECAUTIONS CAUTION The use of optical instruments with this product will increase eye hazard. Information (for the customers in USA) This equipment has been tested and found to comply with the limits for a Class B digital device. Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. Which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet that is on a circuit different from the one the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void you authority to operate this equipment. For the customers in the United Kingdom and / European countries This compact disc player is classified as a CLASS 1 LASER product. The CLASS LASER PRODUCT label is located on the bottom exterior. For the customers In Canada This apparatus complies with the Class B limits for radio noise emission set out in radio interference regulations. This product contains a low power laser device. CAUTION:INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. On Safety As the laser beam used in this compact disc player could be harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only. • Do not put any foreign objects in the disc compartment. If you do so, the laser beam interlock may be defeated allowing the laser to remain on when the lid is opened. • Do not put any foreign objects in the DC 9V(external power input) jack. Should any solid objects or liquid fall into the unit, disconnect the power supply and have the unit checked by qualified personnel before any further operation. On Operation Since the CD system offers a wide dynamic range, the peaks of the high level inputs are recorded with high fidelity, and the noise level is very low. Do not turn up the volume while listening to a part of the disc with no audio signals or very low level inputs. If you do so, the speakers may be damaged when the peak level of the sound is played. The lens of the laser should be kept clean. Do not touch the lens or poke at it with your fingers. If you do so, the lens may be damaged and the unit will not operate correctly. Never use the unit where it would be subject to: - Heat sources such as radiators or airducts. - Direct sunlight. - Excessive dust. - Moisture or rain. - Mechanical vibration or shock. - Unleveled surface. • Do not place any heavy object on top of the unit. • When the unit is used with an AC power adaptor, do not wrap the unit in a cloth, blanket, etc. If you do so, the temperature inside Connect the AC power cord to a wall outlet. -2- 3. Press BAND button to FM or AM. In Clock Mode 1. Press MEMORY/SET button for about 3 seconds. Normally hour and minute digit will flash. 2. Press 3. Press button to adjust hour. button to adjust minute. LISTENING TO THE RADIO 1. Press the STANDBY button to turn on the unit. To AC outlet Please use a 9V 500mA power adaptor. Plus pole “ ” to the center pin of the 5.5mm socket. When the unit is not in use, be sure to disconnect the AC power adaptor from the mains supply. Remarks: If AC cord is unplugged, please wait 5 seconds before AC cord is plugged in again. TURNING ON THE UNIT Plug the AC adaptor to AC outlet. This display will light up in standby mode. Press STANDAY button, and press FUNCTION button to select the desired function, the corresponding indicator will light up. ADJUST THE SOUND Rotate the VOLUME to adjust sound level. Presetting Station Setting The unit can store AM - 10 stations, FM - 10 stations. It can be tuned into by selecting their preset numbers. It is possible to store station of any band in order of your choice. Note: LCD display will return to CLOCK mode after about 15 seconds with no further operation. 3. Press MEMORY/SET button until “MEMORY” indicator flash. -5- 1 2 7 3 4 5 6 8 9 10 11 Front View 12 16 13 17 18 14 19 15 For Better Radio Reception 4. Press PRESET + or PRESETbutton to select channel number. 11. SNOOZE button 12. PRESET + / REPEAT button 13. PHONE jack 14. PRESET - button 15. COLORS button 16. ALARM 1 button 17. Display window 18. VOLUME control 19. ALARM 2 button 1. STANDBY button 2. SLEEP button 3. MEMORY/SET button 4. HR / TUNING button 5. CD OPEN button MIN / TUNING button 6. 7. DIMMER button 8. FUNCTION button (RADIO/CD) 9. CD STOP/BAND button 10. CD PLAY/PAUSE button -4- DISPLAY COLOR AND BRIGHTNESS • Press DIMMER button to change the LCD display brightness. • Press COLORS button to repeatedly select the multi-color display changed cyclically as below. SETTING SLEEP FUNCTION When the sleep timer is used, the power will be automatically turned off after the specified time passes. Set in CD or Tuner Mode CAUTION: DO NOT CONNECT TO OUTSIDE ANTENNA. 5. Press MEMORY/SET button until “MEMORY” indicator lights up to memorize the station. 6. Repeat steps 1 to 5 for the next preset. To Search For a Station Automatically Tuning Into a Preset Station • Press and hold the or button still for 1to 2 seconds, and a station is searched automatically. Search will automatically stop when a station is tuned. Note: • The search may not stop at a station if the broadcast station signal is too weak. 1. Press BAND button to select FM or AM band. 2. Press PRESET + or PRESET button to select a preset number. To Receive The FM Broadcast in Stereo 2. Press the FUNCTION button to TUNER. Top View -3- 1. Press BAND to select FM or AM band. or button to tune to a desired station. 2. Press FM Extend the external FM antenna wire. 4. Press MEMORY/SET button to confirm. AC POWER ADAPTOR 4. Press or button to tune to a desired station. AM Rotate the unit horizontally. LOCATION OF CONTROLS POWER SUPPLY On Use -1- CLOCK SETTING IN STANDBY MODE and outside the unit may rise considerably, resulting in malfunctioning of the unit. • If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, the moisture may condense on the lens inside the unit. Should this occur, the unit will not operate. In this case, remove the disc and leave the unit in a warm place for several hours until the moisture evaporates. • For the unit to operate at its best, it should not be subjected to temperatures below 5°C (41° F) or above 35°C (95° F). 2. Press SLEEP button to select the length of remaining time until the unit turns off. It changes the indicator in following way: ' %# $ "# # # ! • To cancel the sleep timer, press SLEEP button until “”show in display. 1. Press BAND button to FM. 2. When receiving FM broadcast in stereo, the " " indicator will light up. -6- 1. Press SLEEP button while the power is on. “SLEEP” and “” light up. -7- -8- ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Wake up to radio, CD, or buzzer
- Dual alarm settings for customized wake-up times
- Snooze function for extra sleep
- CD player with repeat play for continuous music
- AM/FM radio tuner for music and news
- Large, easy-to-read LCD display
- Intuitive button layout for effortless operation
Frequently asked questions
Press the ALARM 1 button until “ ” and alarm time start to flash. Press ↩ or ▲ button to adjust hour. Press ◼ or ▼ button to adjust minute. Press MEMORY/SET button to confirm Alarm 1 wake up time.
Press the STANDBY button to turn to function mode. Press OPEN button to insert a CD into the slot with printed side facing upward and close the door. Press the FUNCTION button to select CD mode. After loading the CD, total tracks of the disc will be shown.
To repeat the same track, press the PRESET/REPEAT button until “REPEAT” icon lights up on the display. To repeat the disc, press the PRESET/REPEAT button until “REPEAT ALL” icon lights up on the display.