Ch5. Wireless Solutions

Ch5. Wireless Solutions
Wireless Solutions
5.1
5.2
5.3
5.4
Wireless LAN & Wireless Modem
P5-1-1
‧Wireless LAN
P5-1-3
‧Wireless Modems
P5-1-5
GPRS/GSM Wireless Products
P5-2-1
‧Modems
P5-2-3
‧Intelligent GPRS/GSM Modules
P5-2-7
‧Mini-Programmable Automation Controllers
P5-2-9
ZigBee Wireless Products
P5-3-1
‧ZigBee Converters
P5-3-3
‧ZigBee Repeaters
P5-3-7
External Antenna
P5-4-1
‧Applications
P5-4-1
‧2.4 GHz Omni-directional Antennas
P5-4-3
‧2.4 GHz Directional Antennas
P5-4-5
‧Power Amplifiers
P5-4-7
Overview
5
5.1. Wireless LAN & Wireless Modems
Wireless Solutions
Wireless LAN
1
Wireless LAN & Wireless Modems
Nowadays, Wireless LAN applications are very popular. They’re not only faster than traditional industrial
transmissions, i.e. RS-232, RS-485, RS-422 etc, but are also able to minimize the need for troublesome
wiring tasks and have a higher mobility than an Ethernet network. By taking full advantage of the
integrated Web Server capability, configuration of the T-316 can easily be performed via a simple Web
browser user interface.
CF
Overview
5-1-1
ICP DAS CO., LTD
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Wireless Modems
5
Wireless Solutions
1
The SST-2450 is based on a direct sequence spread spectrum using RF technology, operating in the ISM
bands with a frequency range of 2410.496 MHz to 2471.936 MHz and a channel spacing of 4.096 MHz.
Wireless LAN & Wireless Modems
The SST-2450 is a spread spectrum radio modem with an RS-232/RS-485 interface port and is designed for
data acquisition and control applications between a host and remote sensors. It is also useful for those
applications where the installation of cable wire is inconvenient. The SST-2450 can be used not only in
peer-to-peer mode, but also in a multi-point structure.
CF
Overview
Website: http://www.icpdas.com
E-mail: [email protected]
5-1-2
Wireless LAN
PCI
5
Features
Wireless Solutions
802.11b Ethernet Client
Web-based Configuration
Web-based Firmware Upgrades
64/128-bit WEP
No Driver Installation Required
Plug and Play Operation
Directional 6dBi Gain Antenna
AP Priority List
Small and Compact
T-316
DIN-Rail Mountable
128 bytes
bytes Hardw
Hardware
are F
FIFO
IFO ffor
or Ea
Each
ch Po
Port
rt
Smart WLAN Ethernet Client
Introduction
The T-316 is an Ethernet LAN to wireless LAN converter. It requires no software or drivers to be installed and the configuration process is very simple. The
current hardware system or currently running programs do not need to be modified in order to enjoy the benefits of wireless transmission.
Operating Modes
1
Ad-hoc Mode
Infrastructure Mode
Wireless LAN & Wireless Modems
An Ad-hoc network is formed using a number of wireless stations (without an
Access Point) and communicates via radio waves. For the user, the shared
resources on the wireless network appear exactly as they would on a regular
wired network. The wireless operation of the network is totally transparent.
An Infrastructure network is formed using a number of stations together
with one or more Access Points (APs), with the stations positioned
within a set distance from the AP. This mode supports long distance
transmissions.
Applications
PC
μPAC-7186EXD
T-316
T-316
Ethernet
Wi-Fi
T-316
XP-8041
Ethernet
M-7000
I-7000
RS-485
CF
Ethernet
Remote I/O Modules
T-316
T-316
iP-8441
RU-87P4
RS-485
Ethernet
5-1-3
ICP DAS CO., LTD
Remote I/O Units
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Specifications
5
Wireless
IEEE 802.11b DSSS (2.4 GHz ISM radio band)
Standard
Data Rate
Wireless Solutions
11 Mbps, 5.5 Mbps, 1 Mbps (Auto scaling)
Transmit Power
+15 dBm (typical)
Data Rate Sensitivity
Modulation
11 Mbps
-84 dBm
5.5 Mbps
-87 dBm
1 Mbps
-90 dBm
11 Mbps
5.5 Mbps
CCK
CCK
1 Mbps
DBPSK
Antenna
Internal patch antenna with diversity
Transmission Range
100 m
General
System Interface
Ethernet (RJ-45)
LAN
802.3 compliant for wired LAN
LED Indicators
Power
Yes
RF Activity
Yes
LAN Activity
Yes
Power
Operating Voltage
+3.3 VDC +/-5 % or +5.0 VDC +/-5 %
Current Consumption
500 mA (max.)
Mechanical
Dimensions (W x H x D)
72 mm x 108 mm x 35 mm
Weight
250 g
Environment
Operating Temperature
0 °C ~ +55 °C
Humidity
10 ~ 95% RH, non-condensing
1
Dimensions (Unit: mm)
35
Left Side View
108
72
Front View
Right Side View
Bottom View
Back View
CF
Ordering Information
T-316
88.1
108
Top View
Wireless LAN & Wireless Modems
4.5
40.4
Smart WLAN Ethernet Client
T-316
Website: http://www.icpdas.com
E-mail: [email protected]
5-1-4
Wireless Modems
5
Features
Wireless Solutions
Half-duplex up to 57600 bps
Internal Self-Tuner
ISM Band 2.4 GHz
Supports Full-duplex and Half-duplex communication
Spread Spectrum Technology
SST-2450
2450 MHz Wireless Modem
Introduction
Applications
The SST-2450 is a spread spectrum radio modem with an RS-232/RS-485
interface port and is designed for data acquisition and control applications
between host and remote sensors. It is also useful for those applications, the
cable wire is inconvenient to be installed. The SST-2450 can be used in not
only peer to peer mode but also multi-point structure.
PC
SST-2450
SST-2450
RS-232
RS-485
RF
XP-8041
1
SST-2450
M-7000
I-7000
RS-485
RS-485
Remote I/O Modules
Wireless LAN & Wireless Modems
CF
iP-8441
RS-485
RU-87P4
RS-485
Remote I/O Units
Specifications
Wireless
Operating Frequency Range
Channel Spacing
Output Power
Transmit Power
Modulation
Radio Technique
Duplex Mode
Number of Channel
Number of PN Code
PN Code Rate
Transmission Range
Data Bit Error Rate
Antenna
Type
Connector
Serial Link
Interface
SST-2450
Max. Data Transfer Rate in
Asynchronous Mode
Max. Data Transfer Rate in
Synchronous Mode
Data Format
Power
Operating Voltage
Current Consumption
2.4 GHz (2410.496 MHz ~ 2471.936 MHz)
4.096 MHz
0.05 W
17 dBm +/-2 dBm
MSKG
Direct Sequence Spread Spectrum
TDD (for Full-duplex)
16
16
1.365 Mchips/Sec.
Typical 300 m
< 1/1000 @ -102 dBm
3 dBi Omni-directional, bendable
Reverse-Polarity SMA-Jack
RS-232
RS-485
Full-duplex Mode
Half-duplex Mode
Full-duplex Mode
Half-duplex Mode
Typical
Transmission
Receive
Mechanical
Dimensions (W x H x D)
Environment
Operating Temperature
Storage Temperature
Humidity
5-1-5
SST-2450
ICP DAS CO., LTD
TxD, RxD, GND
D+, D-; internal self-tuner ASIC; Non-isolated
9600 bps
28800 bps
19200 bps
57600 bps
N, 8, 1 or E, 8, 1
+10 VDC ~ +30 VDC
Less than 250 mA
2W
1W
72 mm x 117 mm x 35 mm
-10 °C ~ +50 °C
-20 °C ~ +70 °C
0 ~ 90% RH, non-condensing
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Pin Assignments
3-wire RS-232 Wiring
RS-232 Master
N/A
RL0 NO
RL0 COM
RL1 NO
RL1 COM
RL2 NO
RL2 COM
10 N/A
RL3 NO
RL3 COM
RL4 NO
RL4 COM
TxD
RL5 NO
05
23 RL5 COM
RxD
PWR
(R)+Vs
10
(B)GND
01
(B)GND
(G)DATA-
09
(R)Vs+
08
IN.COM
(Y)DATA+
IN2
GND
07
IN1
06
9
SST-2450
SST-900
IN0
Twisted Pair Wiring plus Ground
--
04
1
2-wire Only Device
GND
03
E1
DATA+(B)
DATA-(A)
GND
SET
02
5
Antenna
IN4
01
Pin
Assignment
IN3
Terminal
No.
GND
DATA-(A)
Device 3
DATA+(B)
GND
DATA-(A)
DATA+(B)
GND
DATA-(A)
DATA+(B)
Device 2
Wireless Solutions
RS-485 Master
Device 1
IN5
Wiring
2-wire
RS-485 Wiring
10
RS-232 Device
TxD
RxD
GND
RxD
TxD
GND
Dimensions (Unit: mm)
35
31.5
1
56.0
Top View
2-SCREW
M3
56.0
35
72.0
72.0
Front View
Back View
Bottom View
39.5
Din-Rail Mounting Bracket
CF
Ordering Information
2450 MHz Wireless Modem
Accessories
ANT-8
ANT-15
1 km, 2.4 GHz External Antenna (Omni-directional). Gain: 8 dBi
ANT-18
9 km, 2.4 GHz External Antenna (Directional). Gain: 18 dBi
ANT-15YG
ANT-21
5 km, 2.4 GHz External Antenna (Directional). Gain: 15 dBi
ANF-2401
1 W Amplifier
SST-2450
SST-2450
Side View
Wireless LAN & Wireless Modems
117
5 km, 2.4 GHz External Antenna (Omni-directional). Gain: 15 dBi
12 km, 2.4 GHz External Antenna (Directional). Gain: 21 dBi
Website: http://www.icpdas.com
E-mail: [email protected]
5-1-6
Wireless Modems
5
Features
Wireless Solutions
Half-duplex up to 115200 bps
Internal Self-Tuner
ISM Band 900 MHz
SST-900
900 MHz Wireless Modem
Introduction
Applications
The SST-900 is a radio frequency modem with an RS-232/RS-485 interface
port and is designed for data acquisition and control applications between a
host and remote sensors. It is also useful for those applications where the
installation of cable wire is inconvenient. The SST-900 can be used not only in
peer-to-peer mode but also in a multi-point structure.
PC
SST-900
SST-900
RS-232
RS-485
RF
XP-8041
1
SST-900
M-7000
I-7000
RS-485
RS-485
Remote I/O Modules
Wireless LAN & Wireless Modems
iP-8441
RS-485
RU-87P4
RS-485
Remote I/O Units
Specifications
Wireless
Operating Frequency Range
Channel Spacing
915 MHz (902 MHz ~ 928 MHz)
Transmit Power
15 dBm
Number of Channel
Transmission Range
16
Data Bit Error Rate
< 1/1000 @ -102 dBm
1.5 MHz
Typical 300 m
Antenna
Type
3 dBi Omni-directional, bendable
Connector
CF
SST-900
Reverse-Polarity SMA-Jack
Serial Link
RS-232
Interface
RS-485
TxD, RxD, GND
D+, D-; internal self-tuner ASIC; Non-isolated
SST-900
Max. Data Transfer Rate (Half-duplex Mode)
115200 bps
Data Format
N, 8, 1 or E, 8, 1
Power
+10 VDC ~ +30 VDC
Operating Voltage
Mechanical
Dimensions (W x H x D)
72 mm x 117 mm x 35 mm
Environment
5-1-7
Operating Temperature
-10 °C ~ +50 °C
Storage Temperature
-20 °C ~ +70 °C
Humidity
0 ~ 90% RH, non-condensing
ICP DAS CO., LTD
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Pin Assignments
3-wire RS-232 Wiring
RS-232 Master
N/A
RL0 NO
RL0 COM
RL1 NO
RL1 COM
RL2 NO
RL2 COM
10 N/A
RL3 NO
RL3 COM
RL4 NO
RL4 COM
TxD
RL5 NO
05
23 RL5 COM
RxD
PWR
(R)+Vs
10
(B)GND
01
(B)GND
(G)DATA-
09
(R)Vs+
08
IN.COM
(Y)DATA+
IN2
GND
07
IN1
06
9
SST-2450
SST-900
IN0
Twisted Pair Wiring plus Ground
--
04
1
2-wire Only Device
GND
03
E1
DATA+(B)
DATA-(A)
GND
SET
02
5
Antenna
IN4
01
Pin
Assignment
IN3
Terminal
No.
GND
DATA-(A)
Device 3
DATA+(B)
GND
DATA-(A)
DATA+(B)
GND
DATA-(A)
DATA+(B)
Device 2
Wireless Solutions
RS-485 Master
Device 1
IN5
Wiring
2-wire
RS-485 Wiring
10
RS-232 Device
RxD
TxD
GND
TxD
RxD
GND
Dimensions (Unit: mm)
35
31.5
1
56.0
Top View
2-SCREW
M3
56.0
35
72.0
72.0
Front View
Back View
Bottom View
39.5
Din-Rail Mounting Bracket
CF
Ordering Information
900 MHz Wireless Modem
Accessories
ANT-8
ANT-15
1 km, 2.4 GHz External Antenna (Omnidirectional). Gain: 8 dBi
ANT-18
9 km, 2.4 GHz External Antenna (Directional). Gain: 18 dBi
ANT-15YG
ANT-21
5 km, 2.4 GHz External Antenna (Directional). Gain: 15 dBi
ANF-2401
1 W Amplifier
SST-900
SST-900
Side View
Wireless LAN & Wireless Modems
117
5 km, 2.4 GHz External Antenna (Omnidirectional). Gain: 15 dBi
12 km, 2.4 GHz External Antenna (Directional). Gain: 21 dBi
Website: http://www.icpdas.com
E-mail: [email protected]
5-1-8
Overview
5
5.2. GPRS/GSM Wireless Products
Wireless Solutions
ICP DAS GPRS/GSM wireless solutions are uniquely designed to meet the challenges of implementing and
Managing a small, medium and large number of unmanned remote devices as well as mobile terminals
using the GPRS/GSM network. The ICP DAS GPRS/GSM wireless system is comprised of intelligent
GPRS/GSM modems with versatile interfaces, a GPRS/GSM Data Server (DS) and GRPS/GSM PACs with
embedded dynamic IP resolution technology to help system integrators and application service providers
quickly integrate GPRS/GSM technology into their own solutions, and save development time with reduced
costs and assured performance.
Advantages & Benefits
◆
◆
◆
◆
There is no need to build an expensive fixed line network, saving substantially costs
Plug & Play - Enable any device to be connected to the Internet via serial port over a GSM/GPRS network
Communications - The most efficient method of handling data over a GPRS/GSM wireless network and the Internet
Complete - A full turnkey solution that is designed for both fixed and mobile machine-to-machine applications
2
GPRS/GSM Wireless Products
CF
Overview
5-2-1
The Supreme has the same versatile Plug & Play form factor as previous M1306 products, and is packed
with a host of new features that will carry your applications well into the future. For μPAC users, we
provide GPRS, GSM and SMS lib files that allow you to quickly create custom application. For PAC users,
the necessary software tools for GPRS, GSM and SMS are built to the OS.
ICP DAS CO., LTD
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
5
Wireless Solutions
Product
GTM-201 series
G-4500 series
Applications
Intelligent GPRS/GSM modules
Quad-band 850/900/1800/1900 MHz
● Can act as a GPRS or SMS gateway module
● SMS reception and transmission
● Connect any serial device to GPRS and the
Internet
● Easily monitor remote processes
● Plug and play. No special programming
Knowledge required
● Support for Voice alarm via GSM network
● GUI-based Utility
● Industrial design with surge protection
●
●
●
●
●
●
Website: http://www.icpdas.com
●
●
●
●
●
●
●
●
●
●
●
Remote data monitoring and
control
Water, gas and oil flow metering
Power station monitoring and
control
Traffic signal monitoring and
control
Remote I/O monitoring systems
Home automation
Vendor machine management
systems
Voice alert system
Fleet management
Commercial vehicle monitoring
and driver performance
monitoring
Rental car monitoring and theft
recovery
Emergency (ambulance and fire
engine)
Hydrology monitoring systems
E-mail: [email protected]
2
CF
Overview
Multi-function GPRS/GSM PACs
● Supports a variety of TCP/IP features,
including TCP, UDP, IP, ICMP and ARP, etc.
● 10/100 BASE-T NE2000 compatible Ethernet
Controller
● Built-in Self-Tuner ASIC controller on the
RS-485 port
● Support the Modbus Protocol
● GPS function
● Free easy-to-use software development
toolkits
● Industrial design with surge protection
●
Equipment automation
Remote monitoring systems
Remote Data acquisition systems
For the PC based/PLC/PAC-based
applications
GPRS/GSM Wireless Products
GT-5xx series
Functions
Industrial GSM/GPRS modems
● Quad-band 850/900/1800/1900 MHz
● Different communication interfaces are
provided, including RS-232 and USB, etc.
● Uses AT commands
● Designed for GPRS, data, fax, SMS and
voice applications
● Industrial design with surge protection
● Supports TCP Server, TCP client, UDP client
connection from GPRS
5-2-2
Modems
PCI
5
Features
Quad-band GSM/GPRS Modem Operating of 850/900/1800/1900 MHz
Wireless Solutions
Designed for GPRS, Data, Fax, SMS and Voice Applications
Supports TCP Server, TCP Client, UDP Client Connection from GPRS
Supports Standard AT Commands
Includes a Digital Input Channel to reset the System
Provide 3.5 mm stereo jack for Audio Interface
LED Indicators for GSM and Power Indication
High reliability in harsh environments
The RS-232 Port supports 9600 to 115200 bps (GTM-201-RS232)
GTM-201-RS232
GTM-201-USB
USB Driver for Windows, WinPAC (WinCE5.0), LinPAC (Linux 2.6)
(GTM-201-USB)
DIN-Rail mountable
Industrial Quad-band GPRS/GSM Modems
Introduction
2
GPRS/GSM Wireless Products
GTM-201
GTM-201-RS232/GTM-201-USB
M-2
M
-2
2
5-2-3
Machine
Monitor
SMS
XP-8041
RS-232
GTM-201-RS232
Vendor
Machine
Models
GSM/GPRS System
GPRS/GSM Quad-band
GPRS Multi-slot
GPRS Mobile Station
GPRS Class 10
CSD
Compliant with GSM Phase 2/2+
Coding Schemes
SMS
Serial Ports
Serial Standards
RS-232
Baud Rate
Include Cable
Compatibility
GTM-201-RS232
Internet
GPRS
PLC
PC
USB
GTM-201-USB
-
Reset Input
Input Type
On Voltage Level
Off Voltage Level
Input Impedance
LED Indicators
Power
GSM/GPRS
Power
Protection
Frame Ground Protection
Required Supply Voltage
Power Consumption
Connection
Mechanical
Casing
Flammability
Dimensions (W x L x H)
Installation
Environment
Operating Temperature
Storage Temperature
Humidity
GTM-201-USB
850/900/1800/1900 MHz
Class 10/8
Class B
Max. download speed 85.6 kbps
Up to 14.4 kbps
Class 4 (2 W @ 850/900 MHz); Class 1 (1 W @ 1800/1900 MHz)
CS 1, CS 2, CS 3, CS 4
Text and PDU Mode
RS-232 (DB-9 Female)
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
9600 bps ~ 115200 bps
RS-232 9-Pin Female to Male cable (CA-0915)
-
USB (B-TYPE) to RS232(VCP)
TxD, RxD, DTR, DSR, DCD, RI, GND
USB Type A to Type B cable (CA-USB18)
USB 1.1 and 2.0 standard
Windows 98 and 2000
Windows XP and XP 64-bit
Windows Vista and Vista 64-bit
WinPAC (WinCE 5.0)
LinPAC (Linux kernel 2.6)
Isolated, 3750 Vrms
+3.5 VDC ~ +30 VDC
+1V max.
3 kΩ, 0.25 W
Red
Green
Power reverse polarity protection
ESD, Surge, EFT, Hi-Pot
+10 VDC ~ +30 VDC
Idle: 25 mA @ 24 VDC; Data Link: 100 ~ 400 mA (peak) @ 24 VDC
5-Pin 3.81 mm Removable Terminal Block
Plastic
UL 94V-0 materials
33 mm x 87 mm x 107 mm
DIN-Rail
-25 °C ~ +55 °C
-40 °C ~ +80 °C
5 ~ 90% RH, non-condensing
ICP DAS CO., LTD
Call
Phone
GSM
Network
Specifications
USB Driver Support
CF
Applications
The GTM-201 is a series of industrial Quad-band GSM/GPRS modems with
RS-232 and USB interfaces that work at frequencies of GSM 850 MHz, EGSM
900 MHz, DCS 1800 MHz and PCS 1900 MHz. The modems utilize the
GSM/GPRS network for convenient and inexpensive data transfer from
remote instruments, meters, computers or control systems in either live data
or packet data acquisition. The GTM-201 series has an integrated TCP/IP
stack so that even simple controllers with serial communications ports can be
connected to the modem without the need for special installation of drivers.
The features of the GTM-201 series allows a variety of PLC and PC
applications to take advantage of SMS and GPRS connectivity. The voice
interface allows these modems to be also applied to alarm systems with
sounds.
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Appearance
GTM-201-RS232
5
GTM-201-USB
PWR
LED Indicators
GSM
PWR
Wireless Solutions
LED Indicators
GSM
RTS/CTS
Switch
Antenna
None
Antenna
SIM Card
SIM Card
+Vs
GND
F.G.
RSTRST+
1. DCD
2. TxD
3. RxD
4. DSR
5. GND
6. DTR
7. CTS
8. RTS
9. RI
RS-232 Port
+Vs
GND
F.G.
RSTRST+
USB Port
Reset
Reset
Removable Terminal Block
Removable Terminal Block
Internal I/O Structure
GTM-201-RS232
GTM-201-USB
+5V
+5V
RST+
RST-
RST+
RST-
Reset
Reset
GPRS/GSM
System
RS-232
Driver
Power
RST button
VBUS
DATA0+
DATA0GND
USB
Driver
+10 ~ +30 VDC
+Vs
GND
Power
Dimensions (Unit: mm)
GTM-201-RS232
GTM-201-RS232/GTM-201-USB
87
78.0
33
39.0
87
99.0
107.0
35.4
2
78.0
GPRS/GSM Wireless Products
+10 ~ +30 VDC
+Vs
GND
GPRS/GSM
System
RST button
TxD
RxD
GND
RTS (optional)
CTS (optional)
DSR (optional)
DTR (optional)
DCD (optional)
RI (optional)
24.6
8.0
Left Side View
Front View
Bottom View
Right Side View
Back View
Top View
87
78.0
GTM-201- Industrial Quad-band GPRS/GSM Modem
33
RS232 CR with RS-232 Interface (RoHS)
GTM-201- Industrial Quad-band GPRS/GSM Modem
39.0
USB CR
107.0
35.4
87
99.0
Accessories
24.6
ANT-421-01
8.0
Left Side View
with USB Interface (RoHS)
78.0
Front View
Right Side View
Website: http://www.icpdas.com
Bottom View
E-mail: [email protected]
3m external GPRS/GSM antenna
GTM-201-RS232/GTM-201-USB
Ordering Information
GTM-201-USB
CF
5-2-4
Intelligent GPRS/GSM Module
5
Features
Wireless Solutions
Support 900/1800/1900 MHz Tri-band frequency
Identify ASCII or Unicode SMS Automatically
Supports max. 140 ASCII Characters
Supports max. 70 Unicode Characters
Built-in ASCII Commands and Transparent Communication Modes
Max. 10 Default Phone Numbers
Industrial Design with Surge Protection
Support SMS setting and control
10 DI (6 Counter), 2 DO, 2 RS-232 port
Digital input support NC/NO/Counter modes
Send alarm SMS by DI trigger or exceed Counter preset limits
GT-530
Support simple command to send SMS via RS-232
Supports DC +10 VDC ~ +30 VDC Power Input
Supports 3.7 V Li-ion Battery Backup
Intelligent SMS Alarm Controller
Introduction
2
GPRS/GSM Wireless Products
Pin 1
Status Line
System Specifications
GSM/GPRS System
Digital Input
10 (6 DI can set as counter + 4 DI work
Input Channel
with Li-ion battery)
On Voltage Level
Off Voltage Level
+3.5 VDC ~ +30 VDC
+1V max.
Digital Output
Output Channel
Output Type
2
Load Voltage
+24 VDC max.
Load Current
500 mA max.
Open Collector Output
GT-530
-53
53
3
EXT (red)
STA (orange)
Class 10/8
GPRS Mobile Station
Class B
GPRS Class 10
Max. download speed 85.6 kbps
CSD
Compliant with
GSM Phase 2/2+
Up to 14.4 kbps
Coding Schemes
CS 1, CS 2, CS 3, CS 4
SMS
Text and PDU Mode
Class 4 (2 W @ 900 MHz)
Class 1 (1 W @ 1800/1900 MHz)
Serial Ports
COM2
RS-232: TxD, RxD, GND
COM3
RS-232: TxD, RxD, GND
Protection
On
The external Power is active
Off
The external Power is not active
Normal
GSM Fail
PIN code
is wrong
Blinking
(1 sec)
Always
on or off
Blinking per
50 ms
Off
(sleep mode)
EXT off blinking
(1 sec)
(wake up)
Blinking
GSM (green)
900/1800/1900 MHz
GPRS/GSM Tri-band
GPRS Multi-slot
Power
Digital Input
EXT on
5-2-5
8 Function Item
Pin 10
I/O Specifications
LED Indicators
CF
C
F
Tool Menu
GT-530 is an intelligent SMS controller for industry applications with the simple commands and SMS tunnel
function, and power can be input by external power or Li-ion Battery. It supports UNICODE or 7 bit format
for users to send SMS messages with in various languages. Applying GT-530, the SMS report can be sent by
defined time or DI/counter event trigger. This can be a remote control and alarm system allowing you to use
your mobile phone to monitor and control your business from any location. Its alarm facilities provide a
flexible way to distribute critical alarm information to any number of mobile phone users. GT-530 can
monitor up to 10 digital
inputs (6 counters). The
user can also interrogate
PC
PC RS-232
PC
PC
the status of I/O through
GND COMTxD COMRxD
GT-530 Utility
SMS messages. The
GT-530 also has 2 Digital
Pin 1
Pin 10
output which can be
activated via DI trigger or
SMS to control the lamps,
GT-530
GT-530
GT-530
COM2.GND COM2.GND COM2.GND
pumps, heaters etc.
3 sec
On
Always on
Blinking per
50 ms
Required Supply Voltage
+10 VDC ~ +30 VDC
with 600 mAh Li-ion battery backup
(Option: 1200 mAh)
Mechanical
Casing
Plastic
Flammability
Dimensions (W x H x D)
UL 94V-0 materials
91 mm x 132 mm x 52 mm
Installation
DIN-Rail
Environment
Modem normal
Modem fail (or Blinking(not 3 sec))
ICP DAS CO., LTD
Reverse polarity protection
Frame Ground Protection ESD, Surge, EFT, Hi-Pot
Operating Temperature
-25 °C ~ +55 °C
Storage Temperature
-40 °C ~ +80 °C
Humidity
5 ~ 95% RH, non-condensing
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Applications
Machine, Standby Power Generator, Electrical Panels, Pumps, Vending Machines, Fire alarm Panels, Gas monitoring System, HVAC system, Door security,
etc.
Signal Alarm and SMS Communication System
Wireless Solutions
Alarm Messages
I/O Signal
Cell
Phone
GPRS/GSM
Machine
Monitor
SMS
GT-530
Events
RS-232
Emergency
Process
Internet
XP-8041
5
Remote Maintenance System
μPAC-7186EXD
GSM
Machine
Monitor
GT-530
RS-232
Events
GT-530
Emergency
Process
RS-485
Home Security System
GTM-201-RS232
Control
Center
Emergency Process
Messages
SMS Tunnel Communication System
iVIEW-100-40
SMS
Messages
XP-8041
SMS
Data
Cell
Phone
Door Event
Digital Meter
GT-530
GT-530
μPAC-7186EXD
GT-530
SMS
Window Event
Smoke Event
RS-232
RS-485
GSM
EKAN-MD104
PLC
Data
SMS
Appearance
Antenna
DI/DO
DI/DO
Antenna
14
Terminal
No.
LED Indicators
PWR
NET
FUNC
DO
DI/DO
BAT Con SIM Card
COM Port &
Power Input
01
Pin
Assignment
Pin
Assignment
Terminal No.
01
DI0
02
DI1
03
DI2
04
DI3
05
DI4
06
DI5
06
TxD2
07
DI6
N/A
07
N/A
08
DI7
DC.+Vs
DI8
Power Input:
+10 VDC ~ +30 VDC
08
09
09
DC.GND
10
DI9
Frame Ground
10
F.G.
11
DO0
12
DO1
13
DO.PWR
14
Ext.GND
COM3
RS-232
COM2
RS-232
01
GND
02
RxD1
03
TxD1
04
GND
05
RxD2
10
2
GPRS/GSM Wireless Products
DI
COM Port &
Power Input
COM Port & Power Input
DI/DO
01
Dimensions (Unit: mm)
52.0
GT-530
-53
53
CF
C
F
Top View
132
52.0
91.0
42.5
Front View
Back View
Ordering Information
GT-530 CR
Intelligent SMS Alarm Controller (RoHS)
Website: http://www.icpdas.com
Left Side View
Bottom View
Right Side View
Accessories
3S003
External GPRS/GSM Antenna
E-mail: [email protected]
5-2-6
Intelligent GPRS/GSM Module
5
Features
Wireless Solutions
Built-in 32 bit, 72 MHz CPU
COM port: COM1 (5-wire RS-232), COM2 (RS-485),
I/O: 6 channels DI, 2 channels DO, 1 channel AI
Supports microSD Storage Card
Quad-band 850/900/1800/1900 MHz
Automatic/continuous GPRS Link Management
Support Modbus RTU protocol to connect to Max 3 Modbus RTU
devices via RS-485 port
Support I/O data logger file transferring by E-mail
Support M2M.OPC server and M2M.API tools
Local I/O linkage function to make the simple local control
GT-540
Support 3.7V 600 mAH Li-battery
Intelligent GPRS Remote Terminal Unit
Introduction
The GT-540 is an intelligent Active GPRS Remote Terminal Unit. It can be used in M2M application fields to transfer the local I/O or Modbus device’s data
via GPRS by the defined period or DI/AI triggers. The local I/O data can also be stored in the SD card to become a remote data logger. In addition, the
GT-540 also offers the e-mail mode to transfer the data by e-mail via GPRS for users to choose. With The simple I/O linkage function, the GT-540 can
reach the real time control in local field.
2
GPRS/GSM Wireless Products
System Specifications
I/O Specifications
GSM/GPRS System
Digital Input
Input Channel
6
Input Type
Sink or Source, Isolated channel with
common power or ground
Wet Contact
On Voltage Level: +3.5 VDC ~ +30 VDC
Off Voltage Level: +1 VDC max.
Class B
GPRS Class 10
Max. download speed 85.6 kbps
Up to 14.4 kbps
Output Channel
Output Type
2
Open Collector (NPN)
Coding Schemes
CS 1, CS 2, CS 3, CS 4
Load Voltage
+30 VDC max.
SMS
Text and PDU Mode
Max. Load Current
100 mA/channel
Serial Ports
COM1
COM2
1
Input Channel
Resolution
12-bit
GT-540
-54
54
4
Input Range/Type
0 ~ 20 mA
Sample Rate
1 kHz max. (Read one channel)
Protection
LED Indicators
EXT (red)
RS-232: TxD, RxD, GND
RS-232, RS-485 (Transparency)
Reverse polarity protection
Frame Ground Protection ESD, Surge, EFT, Hi-Pot
Required Supply Voltage
+10 VDC ~ +30 VDC
Power Consumption
Idle: 35 mA @ 24 VDC
Data Link: 150 ~ 400 mA (peak) @ 24 VDC
Mechanical
On
The external Power is active
Casing
Plastic
Off
The external Power is not active
Flammability
Dimensions (W x H x D)
UL 94V-0 materials
91 mm x 132 mm x 52 mm
Installation
DIN-Rail
STA (orange) EXT on
Blinking
GSM (green)
Class 4 (2 W @ 850/900 MHz)
Class 1 (1 W @ 1800/1900 MHz)
Power
Digital Input
5-2-7
Class 10/8
CSD
Compliant with
GSM Phase 2/2+
Digital Output
Analog Input
CF
C
F
850/900/1800/1900 MHz
GPRS/GSM Quad-band
GPRS Multi-slot
GPRS Mobile Station
3 sec
Off
Normal
GSM Fail
PIN code
is wrong
Blinking
(1 sec)
Always
on or off
Blinking per
50 ms
Modem normal
Environment
Operating Temperature
-25 °C ~ +55 °C
Storage Temperature
-40 °C ~ +80 °C
Humidity
5 ~ 95% RH, non-condensing
Modem fail (or Blinking(not 3 sec))
ICP DAS CO., LTD
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Applications
Machine, Standby Power Generator, Electrical Panels, Pumps, Vending Machines, Fire alarm Panels, Gas monitoring System, HVAC system, Door security,
etc.
Software Solutions
NAPOPC. M2M DA Server
EZ Data Logger
M2M RTU Center
Select GT-540 and Modbus
devices according to your need
TCP/IP Socket
GPRS Ethernet
Wireless Solutions
SCADA, VB, VC, Net...
M2M RTU API
GPRS Ethernet
GPRS Ethernet
Install GPRS RTU Utility
and Test in Your LAB
G-4500 RTU
GT-540P
Active
E-mail
Design and build up your
applications
GT-540
pu
sh
SCADA
EZ Data Logger
da
t
Install M2M software
a
1-AI, 3-DO, 6-DI
RS-485
Modbus RTU
5
Application Flow Chard
(Li-ion
Battery
backup)
GPRS
Programmable with
M2M API tools
GT-540
Install NAPOPC.M2M DA Server
Fixed IP
M2M RTU Center
Set and configure your GPRS RTU
Internet
ma
tica
l
ly
8-AI, 3-DO, 3-DI
RS-485
Deploy to field sites
ra
ut
o
Ethernet
M2M OPC server
Modbus RTU
G-4500 RTU
TU
Reg
istering in M2M R
n
Ce
te
Appearance
Antenna
DI/DO
DI/DO
Antenna
14
Terminal
No.
microSD Socket
LED Indicators
PWR
NET
FUNC
DO
DI/DO
BAT Con SIM Card
COM Port &
Power Input
01
Pin
Assignment
01
DI0
02
DI1
03
DI2
04
Pin
Assignment
Terminal No.
COM1
RS-232
01
RxD1
02
TxD1
COM2
RS-232
03
RxD2
DI3
04
TxD2
05
DI4
Ground for COM
05
GND
06
DI5
D+
DI6
COM2
RS-485
06
07
07
D-
08
DI7
DC.+Vs
DO0
Power Input:
+10 VDC ~ +30 VDC
08
09
09
DC.GND
10
DO1
Frame Ground
10
F.G.
11
DO2
12
DO3
13
DO.PWR
14
Ext.GND
10
2
GPRS/GSM Wireless Products
DI
COM Port &
Power Input
COM Port & Power Input
DI/DO
01
Dimensions (Unit: mm)
52.0
GT-540
-54
54
4
CF
C
F
Top View
132
52.0
91.0
42.5
Front View
Back View
Ordering Information
GT-540 CR
Intelligent GPRS Remote Terminal Unit (RoHS)
Website: http://www.icpdas.com
Left Side View
Bottom View
Right Side View
Accessories
ANT-421-01
3m external GPRS/GSM antenna
E-mail: [email protected]
5-2-8
Mini-Programmable Automation Controllers
5
Features
Embedded MiniOS7, anti-virus
Wireless Solutions
Supports a variety of TCP/IP features, including TCP, UDP, IP, ICMP, AR
10/100 Base-TX NE2000 Compatible Ethernet Controller
COM1 (5-wire RS-232), COM2 (RS-485), COM3 (3-wire RS-232)
Built-in Self-Tuner ASIC Controller on the RS-485 Port
I/O: 3-ch DI, 3-ch DO, 8-ch AI
Supports SD Storage Card
GPRS/GSM: Tri-band 900/1800/1900 MHz, Quad-band 850/900/
1800/1900 MHz (optional)
GPS: 16-ch with All-In-View Tracking (optional)
Support TCP Server, TCP Client, UDP Client Connection from GPRS
128 x 64-dots LCM Display (only for G-4500D(PD)-SIM340)
G-4500(D)-SIM340/
G-4500P(D)-SIM340
Supports Virtual COM Technology
Supports the Modbus Protocol
Built-in RTC, NVRAM, EEPROM
High reliability in harsh environments
Free Easy-to-use Software Development Toolkits
M2M Mini-Programmable Automation Controller Series
Introduction
2
GPRS/GSM Wireless Products
G-4500(D)-SIM340/G-4500P(D)-SIM340
D)-SIM34
S IM
SIM
M
CF
5-2-9
Applications
The G-4500 provided by ICP DAS is a series of M2M (Machine to Machine)
mini programmable controllers with a cellular transceiver that can be used to
monitor industrial equipment information that sends live data to the
monitoring system, providing real-time status. With the optional GPS model,
the G-4500 can also function as a GPS tracking system that can be used in
vehicle management systems or maritime systems.
With a high performance CPU, the G-4500 series modules can handle a large
amount of data and are suitable for the harsh industrial environments. The
G-4500 series features a GPRS/GSM module, Ethernet interface, an optional
GPS module, 3 digital inputs, 3 digital outputs, 8 analog inputs, 2 RS-232 and
1 RS-485 ports.
‧Remote Control/Monitoring Systems
‧Car Monitor Systems
‧GIS Systems
‧Redundant Communication Systems
Specifications
Models
CPU
CPU
SRAM/Flash
NVRAM
EEPROM
Communication Interface
COM1
COM2
COM3
Ethernet
GPRS Interface
Frequency
Quad-Band
Band
GPRS Multi-slot
GPRS Connectivity
Downlink Transfer
DATA GPRS
Uplink Transfer
SMS
GPS Interface
General
G-4500-SIM340
G-4500D-SIM340
850/900/1800/1900 MHz
Class 10/8
GPRS class 10; GPRS station class B
Max. 85.6 kbps
Max. 42.8 kbps
MT, MO, CB, Text and PDU mode
32 channels with All-In-View tracking
Built-in high gain amplifier and bandpass filter
Extra high sensitivity: -159 dBm
Cold/Warm Time: 42/35 sec. in air and stationary
0.1 second
-
Life Time
LED Indicators
System
GPRS
GPS
Power
Protection
Frame Ground Protection
Power Requirement
Power Consumption
Mechanical
Casing
Dimensions (W x L x H)
Installation
Environment
Operating Temperature
Storage Temperature
Humidity
G-4500PD-SIM340
5-wire RS-232
RS-485
3-wire RS-232
10/100 Base-TX Ethernet controller
-
Acquisition Time
Reacquisition Time
LCD Interface
Effective Display Area
General Module Dimension
G-4500P-SIM340
80 MHz internal microprocessor
512K/512K, real time clock, watchdog timer
31 bytes, battery backup, data valid up to 10 years
16 KB, data retention> 40 years. 1,000,000 erase/write cycles
80.61 mm x 14.37 mm (W x H)
93 mm x 70 mm x 1.6 mm (W x H xT)
Expected life is more than 100,000
hours under normal operations
Red
Yellow
Green
-
80.61 mm x 14.37 mm (W x H)
93 mm x 70 mm x 1.6 mm (W x H xT)
Expected life is more than 100,000
hours under normal operations
Yes
Power reverse polarity protection
ESD, Surge, EFT, Hi-Pot
15 W; Unregulated +10 VDC ~ +30 VDC
Idle: 75 mA @ 24 VDC; Data Link: 150 ~ 400 mA (peak) @ 24 VDC
Metal
42 mm x 118 mm x 154 mm
DIN-Rail
-25 °C ~ +50 °C
-40 °C ~ +80 °C
5 ~ 90% RH, non-condensing
ICP DAS CO., LTD
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Appearance
G-4500(D)-SIM340
LED Indicators
N/A
GPRS
LED Indicators
Sys
GPS
GPRS
G-4500(D)/4500P(D)-SIM340
GPRS
Sys
MMC/SD
Ethernet
10/100M
Ethernet
Link/Act
GPS
DIP switch
CN2 Pin Assignment
16
8
Analog Input
AI7
Pin 16
Pin 8
AGND
AI6
Pin 15
Pin 7
AGND
AI5
Pin 14
Pin 6
AGND
AI4
Pin 13
Pin 5
AGND
AI3
Pin 12
Pin 4
GND
AI2
Pin 11
Pin 3
DI2
AI1
Pin 10
Pin 2
DI1
Pin 9
Pin 1
AI0
9
20
1
10
16
COM1 RS-232
1
Power Input:
+10 VDC ~ +30 VDC
8
DI0
9
20
RxD3
Pin 20
Pin 10
DO.PWR
TxD3
Pin 19
Pin 9
DO2
GND
Pin 18
Pin 8
DO1
CTS1
Pin 17
Pin 7
DO0
RTS1
Pin 16
Pin 6
D+
RxD1
Pin 15
Pin 5
D-
TxD1
Pin 14
Pin 4
GND
Ground For COM1
DC.+VS
Pin 13
Pin 3
DC.+VS
DC.GND
Pin 12
Pin 2
DC.GND
Power Input:
+10 VDC ~ +30 VDC
N/A
Pin 11
Pin 1
F.G.
Frame Ground
RUN
Lock
SIM Card
GPRS
INIT
G-4500/
4500PSIM340
Digital Input
CN1 Pin Assignment
COM3 RS-232
11
Analog Ground
G-4500D/
4500PDSIM340
1
10
LCD
Digital Output
COM2 RS-485
11
1
2
Dimensions (Unit: mm)
GPRS/GSM Wireless Products
G-4500PD-SIM340
47.0
142
128.1
168.0
158.7
Front View
Back View
Left Side View
Top View
Bottom View
G-4500(D)-SIM340/G-4500P(D)-SIM340
Right Side View
5
Wireless Solutions
GPRS
G-4500P(D)-SIM340
CF
Ordering Information
G-4500-SIM340 CR
M2M Mini-Programmable Automation Controller (RoHS)
G-4500D-SIM340 CR
M2M Mini-Programmable Automation Controller with LCD Display (RoHS)
G-4500P-SIM340 CR
M2M Mini-Programmable Automation Controller with GPS Function (RoHS)
G-4500PD-SIM340 CR M2M Mini-Programmable Automation Controller with LCD Display and GPS Function (RoHS)
Accessories
ANT-421-01
3m external GPRS/GSM antenna
Website: http://www.icpdas.com
E-mail: [email protected]
5-2-10
Overview
5
5.3. ZigBee Wireless Products
Wireless Solutions
ZigBee Host
ZB-2570/2550
ZigBee DIO
3
ZigBee Wireless Products
CF
Overview
5-3-1
ZigBee Repeater
ZB-2510
ZigBee is a specification based on the IEEE
802.15.4 standard for wireless personal area
networks (WPANs). ZigBee operates in the ISM
radio bands and its focus is to define a generalpurpose, inexpensive, self-organizing, mesh
network that can be used for industrial control,
embedded sensing, medical data collection,
smoke and intruder warning, building automation,
home automation, and domotics, etc.
ICP DAS CO., LTD
Introduction
ZigBee Module Specifications
RF Channels
Receive Sensitivity
Transmit Power
16
-102 dBm
12 dBm
Network Topology
Support
Star, Mesh and cluster tree
Certification
TUV (ZCP)
Antenna
2.4 GHz, 3 dBi Omnidirectional antenna
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Introduction
Selection Guide
5
Interface
RS-232
RS-485
Ethernet
Transmission Range
Up to 700 m (LOS)
Support High Gain
Antenna
Page
ZB-2550
Yes
Yes
-
-
-
5-3-3
ZB-2551
Yes
Yes
-
-
-
5-3-3
ZB-2570
Yes
Yes
Yes
-
-
5-3-5
ZB-2571
Yes
Yes
Yes
-
-
5-3-5
ZB-2550P
Yes
Yes
-
Yes
Yes
5-3-3
ZB-2551P
Yes
Yes
-
Yes
Yes
5-3-3
ZB-2570P
Yes
Yes
Yes
Yes
Yes
5-3-5
ZB-2571P
Yes
Yes
Yes
Yes
Yes
5-3-5
Model Name
Wireless Solutions
Ethernet/Serial to ZigBee Converters
ZigBee Repeater
Model Name
USB Configuration Interface
Repeater Function
ZB-2510
Yes
Yes
ZB-2510P
Yes
Yes
Transmission Range
Up to 700 m (LOS)
Support High Gain
Antenna
Page
-
-
5-3-7
Yes
Yes
5-3-7
3
ZigBee Wireless Products
CF
Overview
Website: http://www.icpdas.com
E-mail: [email protected]
5-3-2
ZigBee Converters
5
Features
Wireless Solutions
ISM 2.4 GHz Operating Frequency
Fully Compliant with 2.4 G IEEE802.15.4/ZigBee Specifications
Wireless Transmission Range up to 100 m (ZB-2550/ZB-2551)
Wireless Transmission Range up to 700 m (ZB-2550P/ZB-2551P)
GUI Configuration Software (Windows Version)
DIN-Rail Mountable
ZB-2550
ZB-2551
ZB-2550P
ZB-2551P
RS-485/RS-232 to ZigBee Converter
Introduction
Applications
The ZB-2550 and the ZB-2551 are small-sized wireless ZigBee converters
based on the IEEE 802.15.4 standard. They allow RS-485/RS-232 interfaces
to be converted to a ZigBee wireless network.
RS-485
μPAC-7186EXD
3
Only one ZB-2550 (Host) is allowed in a ZigBee network and is used to
initialize and manage the data transmission routes. The ZB-2551 (Slave)
ZigB ee router is responsible for transmitting/receiving data from its
child/parent router or the host. ICP DAS ZigBee products are designed for low
data rates. The main benefit of ICP DAS ZigBee products is that they can be
used to define a general-purpose, self-organizing mesh network, which can
be highly advantageous for industrial control.
RS-232
ZB-2550/ZB-2550P
PC Controller
PANID=0xFF01
NodelD=00
RF Channel=01
ZB-2060 (DIO)
ZigBee Wireless Products
PANID=0xFF01
NodelD=02
RF Channel=01
Specifications
Models
Wireless
RF Channels
Receive Sensitivity
Transmit Power
Network Topology Support
Certification
Antenna
Transmission Range
General
CPU
EEPROM
Module Type
Communication Interface
COM 0
Z
ZB-2550(P)/ZB-2551(P)
5-3-3
iP-8411
PANID=0xFF01
NodelD=01
RF Channel=01
RS-485
The typical transmission range of the ICP DAS ZigBee ZB-2550/ZB-2551
converter is 100 m, and the ZB-2550P/ZB-2551P is 700 m.
CF
RS-232
ZB-2551/ZB-2551P
COM 0 Settings
Baud Rate
Data Bit
Parity Check
Stop Bit
LED Indicators
ZigBee Net State
ZigBee RxD
Power
Power
Protection
EMS Protection
Required Supply Voltage
Power Consumption
Connection
Mechanical
Casing
Flammability
Dimensions (W x L x H)
Installation
Environment
Operating Temperature
Storage Temperature
Relative Humidity
ZB-2550
16
-102 dBm
12 dBm
Star, Mesh and Cluster tree
TUV (ZCP)
2.4 GHz-3 dBi
Omni-Directional antenna
100 m
ZB-2550P
ZB-2551
ZB-2551P
18 ~ 24 dBm, adjustable
12 dBm
18 ~ 24 dBm, adjustable
2.4 GHz-5 dBi
Omni-Directional antenna
700 m
2.4 GHz-3 dBi
Omni-Directional antenna
100 m
2.4 GHz-5 dBi
Omni-Directional antenna
700 m
8-bit microcontroller
16 KB (8 blocks, each block has 256 bytes); Data retention > 40 years; 1,000,000 erase/write cycles
Host
Slave
Host
Slave
RS-232 (TxD, RxD and GND); D-Sub 9 Female Non-isolated
RS-485 (D+, D-; internal Self-Tuner ASIC); Non-isolated
RS-232 (TxD, RxD and GND); D-Sub 9 Male Non-isolated
1200 ~ 115200 bps
8
Even, Odd, None
1
Green
Yellow
Red
Power reverse polarity protection
ESD, Surge, EFT
+10 VDC ~ +30 VDC
2.0 W (max.)
0.5 W
5-Pin 5.08 mm Removable Terminal Block
0.5 W
?????????????????
2.0 W (max.)
Plastic
UL 94V-0 materials
33 mm x 78 mm x 107 mm
DIN-Rail
-25 °C ~ +75 °C
-40 °C ~ +80 °C
5 ~ 95% RH, non-condensing
ICP DAS CO., LTD
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Appearance
ZB-2550/2550P
5
ZB-2551/2551P
Antenna
ZigBee
RxD
LED Indicators
PWR
Antenna
Removable Terminal Block
ZigBee
Net
F.G.
COM 0
RS-232 Port
(Female DB-9)
RS-232 Port
(Male DB-9)
DataRS-485
Data+
DataRS-485
Data+
GND
GND
DC Input
ZBSET
DC Input
+Vs
DIP switch
PWR
Removable Terminal Block
F.G.
COM 0
ZigBee
RxD
+Vs
DIP switch
RUN
ZBSET
Wireless Solutions
ZigBee
Net
LED Indicators
RUN
Dimensions (Unit: mm)
87.0
78.0
33
3
39.0
78.0
24.6
8.0
Left Side View
Front View
Right Side View
Back View
Bottom View
Top View
ZigBee Wireless Products
87.0
99.0
107.0
35.4
Ordering Information
ZB-2550 CR
RS-485/RS-232 to ZigBee Converter (Host) (RoHS)
ZB-2550/S CR
RS-485/RS-232 to ZigBee Converter (Host) (RoHS) + GPSU06U-6 (Power Supply)
RS-485/RS-232 to ZigBee Converter (Slave) (RoHS)
ZB-2550P CR
RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS)
ZB-2550P/S CR
ZB-2551P CR
RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS) + GPSU06U-6 (Power Supply)
ZB-2551P/S CR
RS-485/RS-232 to High Power Amplifier ZigBee Converter (Slave) (RoHS) + GPSU06U-6 (Power Supply)
RS-485/RS-232 to ZigBee Converter (Slave) (RoHS) + GPSU06U-6 (Power Supply)
RS-485/RS-232 to High Power Amplifier ZigBee Converter (Slave) (RoHS)
Accessories
Power Supply
ZigBee DIO
ZigBee Repeater
ZigBee Converter
Website: http://www.icpdas.com
E-mail: [email protected]
CF
Z
ZB-2550(P)/ZB-2551(P)
ZB-2551 CR
ZB-2551/S CR
5-3-4
ZigBee Converters
5
Features
Wireless Solutions
ISM 2.4 GHz Operating Frequency
Fully Compliant with 2.4 G IEEE802.15.4/ZigBee Specifications
Wireless Transmission Range up to 100 m (ZB-2570/ZB-2571)
Wireless Transmission Range up to 700 m (ZB-2570P/ZB-2571P)
GUI Configuration Software (Windows Version)
DIN-Rail Mountable
ZB-2570/ZB-2570P
ZB-2571/ZB-2571P
RS-485/RS-232 to ZigBee Converter
Introduction
Applications
ZigBee Network
The ZB-2570/2570P is a host ZigBee converter, and the ZB-2571/2571P is a
slave ZigBee converter. Each feature an Ethernet/RS-485/RS-232 interface.
Devices that have an Ethernet/RS-485/RS-232 interface are also able to be
connected using the ZB-2570/2570P/2571/2571P. By distributing host and
slave ZigBee converters in the field, users can easily build a wireless network
that can be used for both monitoring and control.
3
What are the benefits of using ZigBee?
ZigBee is a specification based on the IEEE 802.15.4 standard for wireless
personal area networks (WPANs). It is targeted at applications that require
secure networking as well as high flexibility for network expansion anytime
new nodes are to be added. It is also widely used in the industrial control
field, in hospitals, labs and in building automation. Three topologies are
defined in the IEEE 802.15.4 standard: Star, Cluster Tree and Mesh. The
typical transmission range for the 2570/2571 is 100 m, and the 2570P/2571P
is 700 m.
ZigBee Wireless Products
Specifications
Models
Wireless
RF Channels
Receive Sensitivity
Transmit Power
Network Topology Support
Certification
Antenna
Transmission Range
General
CPU
SRAM
Flash Memory
EEPROM
Module Type
Communication Interface
COM 0
CF
Z
ZB-2570(P)/ZB-2571(P)
5-3-5
Ethernet
COM 0 Settings
Baud Rate
Data Bit
Parity
Stop Bit
LED Indicators
ZigBee Net State
ZigBee RxD
Power
Power
Protection
EMS Protection
Required Supply Voltage
Power Consumption
Connection
Mechanical
Casing
Flammability
Dimensions (W x L x H)
Installation
Environment
Operating Temperature
Storage Temperature
Relative Humidity
ZB-2570
16
-102 dBm
12 dBm
Star, Mesh and Cluster tree
TUV (ZCP)
2.4 GHz-3 dBi
Omni-Directional antenna
100 m
ZB-2570P
ZB-2571
ZB-2571P
18 ~ 24 dBm, adjustable
12 dBm
18 ~ 24 dBm, adjustable
2.4 GHz-5 dBi
Omni-Directional antenna
700 m
2.4 GHz-3 dBi
Omni-Directional antenna
100 m
2.4 GHz-5 dBi
Omni-Directional antenna
700 m
80186, 80 MHz or compatible
512 KB
512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles
16 KB (8 blocks, each block contains 256 bytes); Data retention > 40 years; 1,000,000 erase/write cycles
Host
Slave
Host
Slave
RS-232 (TxD, RxD and GND); D-Sub 9 Female Non-isolated RS-232 (TxD, RxD and GND); D-Sub 9 Male Non-isolated
RS-485 (D+, D-; internal Self-Turner ASIC); Non-isolated
10/100 Base-TX (Auto-negotiating, auto MDI/MDI-X, LED indicators)
1200~115200 bps
7, 8
Even, Odd, None
1
Green
Yellow
Red
Power reverse polarity protection
ESD, Surge, EFT
+10 VDC ~ +30 VDC
2.5 W
4 W (max.)
5-Pin 5.08 mm Removable Terminal Block
2.5 W
?????????????????
4 W (max.)
Plastic
UL 94V-0 materials
33 mm x 78 mm x 107 mm
DIN-Rail
-25 °C ~ +75 °C
-40 °C ~ +80 °C
5 ~ 95% RH, non-condensing
ICP DAS CO., LTD
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Appearance
ZB-2570/2570P
5
ZB-2571/2571P
LED Indicators
ZigBee
RxD
LED Indicators
PWR
Antenna
Antenna
RS-232 Port
(Female DB-9)
RS-232 Port
(Male DB-9)
RJ-45 Port
COM 0
RJ-45 Port
Removable Terminal Block
10/100 Mbps
COM 0
F.G.
ZigBee
Net
ZigBee
RxD
Removable Terminal Block
10/100 Mbps
F.G.
Data-
DataRS-485
RS-485
Data+
Link/Act
Data+
Link/Act
GND
ZBSET
RUN
GND
DC Input
DIP switch
PWR
DC Input
DIP switch
+Vs
INIT
ZBSET
RUN
Wireless Solutions
ZigBee
Net
+Vs
INIT
Dimensions (Unit: mm)
87.0
78.0
33
3
39.0
78.0
24.6
8.0
Left Side View
Front View
Right Side View
Back View
Bottom View
Top View
ZigBee Wireless Products
87.0
99.0
107.0
35.4
Ordering Information
ZB-2570 CR
Ethernet/RS-485/RS-232 to ZigBee Converter (Host) (RoHS)
ZB-2570/S CR
Ethernet/RS-485/RS-232 to ZigBee Converter (Host) (RoHS) + GPSU06U-6 (Power Supply)
Ethernet/RS-485/RS-232 to ZigBee Converter (Slave) (RoHS)
ZB-2570P CR
Ethernet/RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS)
ZB-2570P/S CR
ZB-2571P CR
Ethernet/RS-485/RS-232 to High Power Amplifier ZigBee Converter (Host) (RoHS) + GPSU06U-6 (Power Supply)
ZB-2571P/S CR
Ethernet/RS-485/RS-232 to High Power Amplifier ZigBee Converter (Slave) (RoHS) + GPSU06U-6 (Power Supply)
Ethernet/RS-485/RS-232 to ZigBee Converter (Slave) (RoHS) + GPSU06U-6 (Power Supply)
Ethernet/RS-485/RS-232 to High Power Amplifier ZigBee Converter (Slave) (RoHS)
Accessories
Power Supply
ZigBee DIO
ZigBee Repeater
ZigBee Converter
Website: http://www.icpdas.com
E-mail: [email protected]
CF
Z
ZB-2570(P)/ZB-2571(P)
ZB-2571 CR
ZB-2571/S CR
5-3-6
ZigBee Repeaters
PCI
5
Features
Wireless Solutions
ISM 2.4 GHz Operating Frequency
Fully Compliant with 2.4 G IEEE802.15.4/ZigBee Specifications
Wireless Transmission Range up to 100 m (ZB-2510)
Wireless Transmission Range up to 700 m (ZB-2510P)
USB Setting Interface
GUI Configuration Software (Windows Version)
DIN-Rail Mountable
AP Pr
Priorit
iorityy Lis
Listt
ZB-2510/ZB-2510P
B-251
-2510
ZigBee Repeater
er
Introduction
3
ZigBee Wireless Products
CF
ZB-2510/ZB-2510P
5-3-7
Small and Compa
Compact
ct
Supports
Suppo
rts 3.3
3 V/5
V/5 V PCI
PCI bus
bus, Pl
Plug
ug and
and Play
Play
128 bytes
bytes Hardw
Hardware
are F
FIFO
IFO ffor
or Ea
Each
ch Po
Port
rt
Applications
The ZB-2510 and ZB-2510P are two ZigBee-based repeater modules included
in the ICP DAS product line. The main difference between these two products
is the transmission range. The ZB-2510 supports an extended transmission
range of up to 100 meters, whereas the ZB-2510P can transmit to a
maximum of 700 meters. Both modules are able to operate in broadcast and
user-defined route modes. When the repeater is set to broadcast mode, the
transmission route is constructed by the ZigBee Host. The repeater will
forward any data that it receives using broadcast mode. The advantage of
this mode is that the repeater can be deployed in a “haphazard” manner
without any concern about positioning. However, the main flaw of this mode
is that if there are too many broadcast data packets in a ZigBee network, it
will cause the network to crash. In contrast, when the repeater is set to
user-defined route mode, it will only forward data using the user-configured
r ou t e . T h e ben ef it of th is m ode is th a t t h e d at a l o ad i n g o f t h e Z i g Bee
network will be reduced, but the user must plan the data transmission route
for the entire ZigBee network before setting up the application. If a mistake
is made on even one repeater point, the entire ZigBee network will be invalid.
ZigBee Host
ZB-2570/2550
ZigBee DIO
ZigBee Repeater
ZB-2510
Specifications
Models
Wireless
RF Channels
Receive Sensitivity
Transmit Power
Network Topology Support
Certification
Antenna
Transmission Range
Setting Interface
USB
Include Cable
Compatibility
Driver Supported
COM 0 Settings
Data Bit
Parity
Stop Bit
LED Indicators
ZigBee Net State
ZigBee RxD
Power
Power
Protection
EMS Protection
Required Supply Voltage
Power Consumption
Connection
Mechanical
Casing
Flammability
Dimensions (W x L x H)
Installation
Environment
Operating Temperature
Storage Temperature
Relative Humidity
ZB-2510
ZB-2510P
16
-102 dBm
12 dBm
Star, Mesh and Cluster tree
TUV (ZCP)
2.4 GHz-3 dBi Omni-Directional antenna
100 m
H t
Host
Type B
CA-USB18 (1.8 M Cable) x 1; USB Type A connector (Type A
USB 1.1 and 2.0 standard
Windows 98/ME/2000/XP/Linux/Vista
18 ~ 24 dBm, adjustable
2.4 GHz-5 dBi Omni-Directional antenna
700 m
Slave
Sl
to Type B cable provided)
8
Even, Odd, None
1
Green
Yellow
Red
Power reverse polarity protection
ESD, Surge, EFT
+10 VDC ~ +30 VDC
1.5 W
3-Pin 5.08 mm Removable Terminal Block
3W
?????????????????
Plastic
UL 94V-0 materials
33 mm x 87 mm x 107 mm
DIN-Rail
-25 °C ~ +75 °C
-40 °C ~ +80 °C
5 ~ 95% RH, non-condensing
ICP DAS CO., LTD
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Appearance
Internal I/O Structure
5
ZB-2510
LED Indicators
ZigBee
RxD
PWR
Wireless Solutions
LED Display
ZigBee
Net
Antenna
VBUS
ZigBee Module
(Slave)
USB
to
Series
Chip
DATA0+
DATA0GND
Antenna
Power Supply
+10 ~ +30 VDC
V+
GND
Power Circuit
USB Port
+Vs GND F.G.
ZB-2510P
LED Display
VBUS
USB
to
Series
Chip
DATA0+
DATA0GND
+10 ~ +30 VDC
V+
GND
ZigBee Module
(Slave)
PA
Antenna
Power Circuit
3
ZigBee Wireless Products
Dimensions (Unit: mm)
87.0
78.0
33
39.0
87.0
99.0
107.0
35.4
78.0
24.6
8.0
Left Side View
Front View
Right Side View
Back View
ZigBee Repeater (RoHS)
ZB-2510P CR
High Power Amplifier ZigBee Repeater (RoHS)
Accessories
Power Supply
ZigBee Repeater
ZigBee Converter
Website: http://www.icpdas.com
Top View
CF
ZB-2510/ZB-2510P
Ordering Information
ZB-2510 CR
Bottom View
E-mail: [email protected]
5-3-8
Applications
5
5.4. External Antennas
Wireless Solutions
1. Omni-directional Antenna to Omni-directional Antenna
Note: As the antennas rely on line-of-sight for connection, they should be placed at the same height.
PC
SST-2450
RS-232
S 232
4
External Antennas
SST-2450
PC
RS-232
S 232
CF
Applications
5-4-1
ICP DAS CO., LTD
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
2. Omni-directional Antenna to Directional Antenna
5
I-7000
SST-2450
SST-2450
ANT-15
RS-485
RS-485
PC
SST-2450
I-7000
Wireless Solutions
A
ANT-18
ANT-21
1
ANT-15YG
A
ANT-8
RS-232
S 23
SST-2450
I-7000
RS-485
I-7000
SST-2450
RS-485
3. Directional Antenna to Directional Antenna
4
ANT-21
T 21
RS-485
I-7000
External Antennas
SST-2450
T-21
T1
ANT-21
I-7000
SST-2450
CF
RS-485
Applications
Website: http://www.icpdas.com
E-mail: [email protected]
5-4-2
2.4 GHz Omni-directional Antennas
5
4. Connector Type for 2.4 GHz Antenna
2.4 GHz Power Amplifier
(option)
External Antennas
ZigBee Modules
ANF-2401
Omni-directional
Wireless Solutions
2.4 GHz Wireless Modules
ZigBee Converter
ZigBee Repeater
ANT-8
ZB-2570P
ZB-2571P
ZB-2510P
ZB-2550P
ZB-2551P
RF Modems
4
ANT-15
RPSMA Female
(Jack)
Directional
RPSMA Male
(Plug)
ANT-15YG
External Antennas
SST-2450
ANT-18
ANT-21
2.4 GHz Omni-directional Antennas
CF
5-4-3
2.4 GHz Omni-directional Antennas
Model Name
Ordering Information
Connector
Radiation
Band
Gain (dBi)
Note
Page
ANT-8
1 km, 2.4 GHz
External Antenna
RP SMA
Male (Plug)
OmniDirectional
2.4 ~ 2.5 GHz
8
Dipole
5-4-4
ANT-15
5 km, 2.4 GHz
External Antenna
RP SMA
Male (Plug)
OmniDirectional
2.4 ~ 2.5 GHz
15
Dipole
5-4-4
ICP DAS CO., LTD
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Specifications
5
Antenna Type
Electrical Specifications
Frequency Range
Gain
Indoor or Outdoor
Directional Sector
2400 ~ 2500 MHz
9 dBi
VSWR
1.3:1 (max.)
Polarization
Linear
HPBW/Horizontal
360°
HPBW/Vertical
Power Handing
10°
Impedance
50 Ω +/-5 Ω
Cable
-
15 W (max.)
Wireless Solutions
Operating Environment
Radiation
N Type Female
Connector
Environmental and Mechanical Characteristics
ANT-8
Operating Temperature
-20 °C ~ +60 °C
Radome Material
Glass fiber
Weight
Dimensions (L x W)
430 g
420 mm x φ35 mm
Ordering Information
ANT-8
Includes
1 km, 2.4 GHz External Antenna (Omnidirectional)
Gain: 8 dBi
3S004 x 1
HDF 200 Cable, 1 m N Type Male to SMA Male
Important Note: Distance data is for reference only. Actual results may
be different depending on the environment.
4
Operating Environment
Radiation
Electrical Specifications
Frequency Range
Gain
VSWR
Outdoor
Directional Sector
2400 ~ 2500 MHz
15 dBi
1.3:1 (max.)
Polarization
Linear
HPBW/Horizontal
360°
HPBW/Vertical
Power Handing
10°
Impedance
50 Ω +/-5 Ω
Cable
RG-58, 100 cm
20 W (max.)
Operating Temperature
-20 °C ~ +60 °C
Radome Material
Glass fiber
Weight
Dimensions (L x W)
1050 g
1600 mm x 35 mm
Ordering Information
ANT-15
Includes
5 km, 2.4 GHz External Antenna (Omnidirectional)
Gain: 15 dBi
3S004 x 1
HDF 200 Cable, 1 m N Type Male to SMA Male
Important Note: Distance data is for reference only. Actual results may
be different depending on the environment.
Website: http://www.icpdas.com
E-mail: [email protected]
2.4 GHz Omni-directional Antennas
N Type Female
Connector
Environmental and Mechanical Characteristics
ANT-15
External Antennas
Specifications
Antenna Type
CF
5-4-4
2.4 GHz Directional Antennas
2.4 GHz Directional Antennas
5
Wireless Solutions
Model Name
Ordering Information
Connector
Radiation
Band
Gain (dBi)
Note
Page
ANT-15YG
5 km, 2.4 GHz
External Antenna
RP SMA
Male (Plug)
Directional
2.4 ~ 2.5 GHz
15
Yagi
5-4-5
ANT-18
9 km, 2.4 GHz
External Antenna
RP SMA
Male (Plug)
Directional
2.4 ~ 2.5 GHz
18
Panel
5-4-6
ANT-21
15 km, 2.4 GHz
External Antenna
RP SMA
Male (Plug)
Directional
2.4 ~ 2.5 GHz
21
Grid
5-4-6
4
External Antennas
Specifications
Antenna Type
Operating Environment
Radiation
Electrical Specifications
Frequency Range
Gain
VSWR
Outdoor
Directional Sector
2400 ~ 2500 MHz
15 dBi
2:1 (max.)
Polarization
Linear
HPBW/Horizontal
25°
HPBW/Vertical
Power Handing
18°
Impedance
50 Ω
Cable
RG-58, 100 cm
10 W (max.)
N Type Female
Connector
Environmental and Mechanical Characteristics
2.4 GHz Directional Antennas
CF
5-4-5
ANT-15YG
Operating Temperature
-40 °C ~ +85 °C
Radome Material
Aluminum
Weight
Dimensions (L x W x H)
425 g
325 mm x 70 mm x 15 mm
Ordering Information
ANT-15YG
5 km, 2.4 GHz External Antenna (Directional)
Gain: 15 dBi
Important Note: Distance data is for reference only. Actual results may
be different depending on the environment.
ICP DAS CO., LTD
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
Specifications
5
Antenna Type
Electrical Specifications
Frequency Range
Gain
Outdoor
Directional Patch
2400 ~ 2500 MHz
18 dBi
VSWR
1.5:1 (max.)
Polarization
Vertical, vertical
HPBW/Horizontal
15°
HPBW/Vertical
Power Handing
15°
Impedance
50 Ω
Cable
RG-58, 100 cm
50 W (cw)
Wireless Solutions
Operating Environment
Radiation
N Type Female
Connector
Environmental and Mechanical Characteristics
ANT-18
Operating Temperature
-40 °C ~ +80 °C
Radome Material
ABS
Weight
Dimensions (L x W x H)
1600 g
360 mm x 360 mm x 16 mm
Ordering Information
ANT-18
Includes
9 km, 2.4 GHz External Antenna (Directional)
Gain: 18 dBi
3S004 x 1
HDF 200 Cable, 1 m N Type Male to SMA Male
Important Note: Distance data is for reference only. Actual results may
be different depending on the environment.
4
Operating Environment
Radiation
Electrical Specifications
Frequency Range
Gain
VSWR
Outdoor
Directional Sector
2400 ~ 2500 MHz
External Antennas
Specifications
Antenna Type
21 dBi
1.5:1 (max.)
Polarization
Linear
HPBW/Horizontal
8°
HPBW/Vertical
Power Handing
5°
Impedance
50 Ω +/-5 Ω
Cable
RG-58, 100 cm
20 W (max.)
N Type Female (Jack)
Connector
Environmental and Mechanical Characteristics
-20 °C ~ +60 °C
Radome Material
ABS
Weight
Dimensions (L x W)
2770 g
610 mm x 248 mm
Ordering Information
ANT-21
15 km, 2.4 GHz External Antenna (Directional)
Gain: 21 dBi
Important Note: Distance data is for reference only. Actual results may
be different depending on the environment.
Website: http://www.icpdas.com
E-mail: [email protected]
2.4 GHz Directional Antennas
ANT-21
Operating Temperature
CF
5-4-6
Power Amplifiers
Power Amplifiers
5
Wireless Solutions
Model Name
Ordering Information
Connector
Radiation
Band
Gain (dBi)
Note
Page
ANF-2401
1 W, 2.4 GHz
Power Amplifier
N Type
Male (Plug)
-
2.4 ~ 2.5 GHz
up to 10 dBm
-
5-4-7
ANF-2402
600 mW, 2.4 GHz
Power Amplifier
RP SMA
Male (Plug)
-
2.4 ~ 2.5 GHz
up to 18 dBm
-
5-4-7
Specifications
Electrical Specifications
Frequency Range
Power Consumption
Transmitter Amplifier
Transmit Gain
Transmit Input Power
Receiver Amplifier
Receive Gain
2400 ~ 2500 MHz
1.2 A @ 12 VDC
up to 12 dBm
200 mW (max.)
up to 10 dBm
Environmental and Mechanical Characteristics
Operating Temperature
Amplifier
Weight
DC Injector
Dimensions Amplifier
-20 °C ~ +70 °C
410 g
185 g
110 mm x 60 mm x 29 mm
(L x W x H) DC Injector 90 mm x 78 mm x 30 mm
4
ANF-2401
External Antennas
Ordering Information
ANF-2401
1 W Amplifier
Specifications
Electrical Specifications
Frequency Range
Lightning Protection
Power Input
2400 ~ 2500 MHz
Power Consumption
0.6 W
Transmitter Amplifier
Transmit Gain
Transmit Current
Consumption
Receiver Amplifier
Receive Gain
Receive Current
CF
Consumption
+10 VDC ~ +30 VDC
up to 18 dBm
300 mA (max.)
-15 dBm typical
15 mA (max.)
Environmental and Mechanical Characteristics
Power Amplifiers
ANF-2402
Operating Temperature
Weight
-40 °C ~ +70 °C
Dimensions (L x H x D)
92 mm x 76 mm x 30 mm
200 g
Ordering Information
ANF-2402
5-4-7
Direct DC ground at antenna
ICP DAS CO., LTD
600 mW, 2.4 GHz Power Amplifier
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement