Avital 2101L Owner's Guide

The company behind Avital® Auto Security Systems
is Directed.
Since its inception, Directed has had one purpose,
to provide consumers with the finest vehicle security
products and accessories available. The recipient of
nearly 100 patents and Innovations Awards in the field
IT'S YOUR CAR - CONTROL IT FROM THE START
of advanced electronic technology.
Quality Directed products are sold and serviced
throughout North America and around the world.
Call (800) 876-0800 for more information about our
products and ser­vic­es.
© 2015 Directed, All rights reserved.
Vista, CA 92081
www.avital.com
G2101L 2015 04
Directed is committed to delivering world class
quality products and services that excite and
delight our customers.
O W N E R’ S
GUIDE
M
O
D
E
L
2101L
Table of contents
What is included....................................................................................................... 2
Your warranty........................................................................................................... 2
Important information............................................................................................... 3
FCC/id notice.................................................................................................... 3
System maintenance......................................................................................... 4
Replacement remote controls........................................................................... 4
Transmitter functions................................................................................................ 5
Standard configuration...................................................................................... 5
Using your system ................................................................................................... 7
Locking.............................................................................................................. 7
Unlocking.......................................................................................................... 7
Disabling the system without a transmitter....................................................... 8
To bypass the starter kill:.................................................................................. 8
Audible mode.................................................................................................... 8
Valet mode........................................................................................................ 8
Panic mode....................................................................................................... 9
Rapid resume logic................................................................................................. 10
Programming options............................................................................................. 10
Glossary of terms................................................................................................... 11
Security & convenience expansions...................................................................... 12
Quick reference guide............................................................................................ 15
Limited lifetime consumer warranty........................................................................ 17
Notes...................................................................................................................... 19
What is included
•
The control module
•
A pair of four-button trans­mit­ters
•
A status LED indicator light
•
A push-button Valet® switch
•
Your warranty registration
Your warranty
Your warranty registration must be completely filled out
and returned within 10 days of purchase. Your product
warranty is not valid if the warranty registration is not
returned. Make sure you receive the warranty registration from your dealer. It is also necessary to keep your
proof of purchase, which reflects that the product was
installed by an au­tho­rized dealer. You may also register
online at www.prodregister.com/directed.
2
© 2015 Directed. All rights reserved.
Important information
Congratulations on the purchase of your keyless entry
system. Due to the complexity of this system, it must
be installed by an authorized dealer only. Installation
of this product by anyone other than an authorized
dealer voids the warranty. All dealers are provided with
a preprinted dealer cer­tif­i­cate to verify that they are
au­tho­rized.
By carefully reading this Owner’s Guide prior to using
your system, you will maximize the use of this system
and its features.
You can print additional or replacement copies of
this manual by accessing the Directed website at:
www.avital.com.
FCC/id notice
This device complies with Part 15 of FCC rules. Operation
is subject to the following con­di­tions: (1) This device
may not cause harmful interference, and (2) This device
must accept any in­ter­fer­ence re­ceived, including in­ter­
fer­ence that may cause undesirable op­er­a­tion.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate this device.
© 2015 Directed. All rights reserved.
3
412 Series
System maintenance
The system requires no specific main­te­nance. Your
remote is pow­ered by a small, lightweight 3-volt lithium
battery (CR2032) that will last approximately one year
under normal use. When the battery begins to weaken,
operating range is reduced and the LED on the remote
starts to dim.
Replacement remote controls
If additional remote controls are desired,
please see your authorized dealer or visit us at:
www.directedstore.com to order. Your replacement
part number is 7143L.
4
© 2015 Directed. All rights reserved.
Transmitter functions
The receiver uses a computer-based learn routine to
learn the trans­mit­ter buttons. This makes it possible to
assign any specific transmitter button, or combination of
buttons, to any receiver function. The transmitter initially
comes programmed with the Standard Configuration,
but may also be customized by an authorized dealer.
The transmitter buttons indicated in all of the instructions
in this manual correspond to a Standard Configuration
transmitter.
Standard configuration
- The locking function is controlled by pressing
this button for one second. Pressing this button for two
seconds also activates Panic mode.
- The unlocking function is controlled by pressing
this button for one second.
- An optional auxiliary function such as trunk release
is controlled by pressing this button for 1.5 seconds.
Audible mode is activated by pressing this button.
The auxiliary output controls _______________________.
- The panic feature is controlled by pressing this
button for two seconds.
© 2015 Directed. All rights reserved.
5
and
- An optional auxiliary convenience or expan-
sion function that has been added to your system can
be activated by pressing these buttons simultaneously.
The auxiliary output controls_____________________.
6
© 2015 Directed. All rights reserved.
Using your system
Locking
Pressing
for one second locks the doors and acti-
vates the optional Failsafe® Starter Kill (if installed). The
parking lights flash once to confirm the system is locked.
While the system is locked, the status LED flashes once
per second.
The starter kill prevents the vehicle’s starter from
cranking. If you press lock again within three seconds
of the initial press, audible mode is activated for that one
operation only.
Note: Manually locking the vehicle does not
enable the starter kill.
Unlocking
Pressing
for one second unlocks the doors. The
parking lights flash twice to confirm the system is
unlocked. The starter kill (if installed) is deactivated. The
status LED will turn off.
Note: Manually unlocking the vehicle does not
disable the starter kill.
© 2015 Directed. All rights reserved.
7
Disabling the system without a transmitter
If your remote transmitter is lost or damaged, you can
manually override the starter kill (if installed). To do
this, you must have the ve­hi­cle’s ignition key and know
where the Valet® switch is located. Be sure to check
with the installer for the location of the Valet® switch.
To bypass the starter kill:
1.
Turn the ignition on.
2. Press and release the Valet switch within 10 seconds. The status LED
DRW-35
stops flashing and the vehicle
starts. If the vehicle does not start, you may have waited
too long. Turn the ignition off and repeat the process.
Location of Valet Button_________________________________
Audible mode
To temporarily turn on the lock or unlock horn honk(s),
press
for less than one second before locking or
unlocking. The confirmation honk(s) will be present for
that one op­er­a­tion only.
Valet mode
You can prevent your system from ac­ti­vat­ing the starter
kill (if installed) using Valet® Mode. This is very use­ful
8
© 2015 Directed. All rights reserved.
when having the vehicle serviced. In Valet® Mode the
starter kill cannot be activated even with the trans­mit­ter,
but all con­ve­nience func­tions (door locks, trunk release,
etc.) will continue to work normally.
To enter or exit Valet® Mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet switch within 10 DRW-35
seconds.
The status LED lights steadily if you are entering Valet
Mode and turns off if you are exiting Valet Mode.
Panic mode
If you are threatened in or near your vehicle, you can
attract attention by trig­ger­ing the system with your
or
transmitter. Just press
for two seconds to
enter Panic Mode. In Panic Mode the horn honks (if
connected), and the parking lights will flash for 30
seconds. To stop Panic Mode at any time, press
or
again.
Note: In order for Panic Mode to work, the
vehicle’s horn and parking lights must be
connected.
© 2015 Directed. All rights reserved.
9
Rapid resume logic
This Directed system can store its current state to
non-volatile memory. If power is lost and then reconnected, the system recalls the stored state from
memory. If the unit is in Valet Mode and the battery is
dis­con­nect­ed for any reason such as to service the car
- when the battery is re­con­nect­ed the unit will be in Valet
Mode. This applies to all system states including lock,
unlock, and panic mode.
Programming options
Programming options control your system’s normal, operational set-up. Most options do not require additional
parts, but some may require additional installation labor.
This system’s programming options are listed below, with
the factory default settings in bold:
•
•
10
Ignition switch-controlled door-locking on or off.
With this feature on, the doors will lock 3 seconds
after the ignition key is turned on, and unlock when
the ignition key is turned off.
Comfort Closure off or on. This option is not available for all vehicles. When programmed on, and
pressing
on the remote, the vehicle will lock
and close the windows/sunroof. See your dealer to
see if this is available for your vehicle.
© 2015 Directed. All rights reserved.
Glossary of terms
Control Unit: The “brain” of your system. Usually hidden
under the dash area of the vehicle. It houses the microprocessor that monitors your vehicle and controls all
system functions.
LED: A light mounted at a discretionary location inside
the vehicle. It is used to indicate the status of your
system.
Starter Interrupt: An automatic switch controlled by
your system which prevents the vehicle’s starter from
cranking whenever the system is locked. The vehicle
is never prevented from cranking when the system is
unlocked in Valet Mode, or if the starter interrupt switch
fails. Your system has feature-ready circuitry for the
starter interrupt, however installation may require additional labor.
Transmitter: A hand-held, remote control which operates the various functions of your system.
Valet Switch: A small button mounted at a discretionary
location inside the vehicle. It is used to override the
system when a transmitter is lost or damaged, or to
enter or exit Valet Mode.
© 2015 Directed. All rights reserved.
11
Security & convenience expansions
Listed below are some of the many expansion options
available for use with your system. Some options may
require additional parts and/or labor. Please consult
with your dealer for a complete list of options available
for use with this system.
Domelight Supervision: The domelight will illuminate for
30 seconds each time the system is disarmed using the
remote. This is useful for seeing inside the vehicle at
night prior to entering it.
Power Door Lock Control: Your system is capable of
controlling many types of power door lock systems;
however, some door lock systems may require extra
parts. Consult with your dealer to determine which type
of locks your vehicle uses.
Power Trunk Release: The system’s auxiliary output can
be programmed to operate a factory power release for
the vehicle’s trunk or hatch. If the factory release is not
power-activated, Directed®’s 522T trunk-release solenoid can often be added.
Power Window Control: Power window control is
provided with Directed®’s 529T or 535T systems. The
529T system will roll up two windows automatically
when the system is armed, or roll two windows down
12
© 2015 Directed. All rights reserved.
by using the transmitter. The 535T will roll two windows
both up and down. The 535T also provides one touch
switch operation.
Progressive Door Unlocking: For added security, your
system can be configured to unlock the driver’s door
only, leaving the passenger doors locked. Pressing
the unlock button an additional time will unlock the
passenger doors. This option requires additional parts
and labor.
© 2015 Directed. All rights reserved.
13

Cut along dotted line and fold for a quick and easy ref­er­ence to keep in your purse or wallet.

Quick reference guide
•
To lock using your remote: Press
for one
second. The doors lock, and the LED starts to
flash. The Failsafe® Starter Kill prevents the vehicle’s starter from cranking if it has been in­stalled. If
audible mode has been enabled, the ve­hi­cle’s horn
(if connected) honks and the parking lights flash
once to confirm the system is locked.
•
To unlock using your remote: Press
for one
second. The doors will unlock (if connected). The
optional starter kill is deactivated. If audible mode
is turned on the vehicle’s horn (if con­nect­ed) honks
twice, and the parking lights flash twice.
•
To enter or exit Valet® Mode: Turn the ignition to
the ON position. Turn the ignition back off. Press
and release the Valet® switch with­in 10 seconds.
The status LED will light steadily if you have
entered Valet® Mode. To exit Va­let® Mode, repeat
the steps above. The LED will turn off when ex­it­ing
Valet® Mode.
•
To activate Panic Mode: Press and hold
for two seconds.
•
To exit Panic Mode: Press
mitter.
or
or
on the trans
Location of Valet Switch___________________________
© 2015 Directed. All rights reserved.
15
Limited lifetime consumer warranty
Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace
(at Directed’s election) with a comparable reconditioned model any Directed unit
(hereafter the “unit”), excluding without limitation the siren, the remote transmitters,
the associated sensors and accessories, which proves to be defective in workmanship or
material under reasonable use during the lifetime of the vehicle provided the following
conditions are met: the unit was purchased from an authorized Directed dealer, the unit
was professionally installed and serviced by an authorized Directed dealer; the unit will be
profession¬ally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible
copy of the bill of sale or other dated proof of purchase bearing the following information: consumer’s name, telephone number and address; the authorized dealers name,
telephone number and address; complete product description, including accessories; the
year, make and model of the vehicle; vehicle license number and vehicle identification
number. All components other than the unit, including without limitation the siren, the
remote transmitters and the associated sensors and accessories, carry a one-year warranty
from the date of purchase of the same. ALL PRODUCTS RECEIVED BY DIRECTED
FOR WARRANTY REPAIR WITHOUT PROOF OF PURCHASE FROM AN
AUTHORIZED DEALER WILL BE DENIED. This warranty is non-transferable
and is automatically void if: the unit’s date code or serial number is defaced, missing or
altered; the unit has been modified or used in a manner contrary to its intended purpose;
the unit has been damaged by accident, unreasonable use, neglect, improper service,
installation or other causes not arising out of defects in materials or construction. The
warranty does not cover damage to the unit caused by installation or removal of the unit.
Directed, in its sole discretion, will determine what constitutes excessive damage and may
refuse the return of any unit with excessive damage.
TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES,
INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED
WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR
PARTICULAR PURPOSE AND WARRANTY OF NON-INFRINGEMENT OF
INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED
NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO
ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION
WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY
NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING
ITS AUTHORIZED DEALERS OR INSTALLERS. DIRECTED SECURITY
SYSTEMS, INCLUDING THIS UNIT, ARE DETERRENTS AGAINST POSSIBLE
THEFT. DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE
AGAINST VANDALISM, DAMAGE OR THEFT OF THE AUTOMOBILE,
ITS PARTS OR CONTENTS; AND HEREBY EXPRESSLY DISCLAIMS
© 2015 Directed. All rights reserved.
17
ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION,
LIABILITY FOR THEFT, DAMAGE AND/OR VANDALISM. THIS WARRANTY
DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOVAL OR
REINSTALLATION OF THE UNIT OR ANY CONSEQUENTIAL DAMAGES
OF ANY KIND. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING
DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO
COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND
APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE.
THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED
SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S
PURCHASE PRICE OF THE UNIT. DIRECTED SHALL NOT BE RESPONSIBLE
FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO,
ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGE
TO VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS,
COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE.
NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A
LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE
SUBJECT TO THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY
IS VOID IF THE UNIT HAS NOT BEEN PURCHASED FROM DIRECTED,
OR AN AUTHORIZED DIRECTED DEALER, OR IF THE UNIT HAS BEEN
DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE, ACTS OF
GOD, NEGLECT, IMPROPER SERVICE, OR OTHER CAUSES NOT ARISING
OUT OF DEFECT IN MATERIALS OR CONSTRUCTION.
Some states do not allow limitations on how long an implied warranty will last or the
exclusion or limitation of incidental or consequential damages. This warranty gives you
specific legal rights and you may also have other rights that vary from State to State.
This warranty is only valid for sale of product(s) within the United States of America and
in Canada. Product(s) sold outside of the United States of America or Canada are sold
“AS-IS” and shall have NO WARRANTY, express or implied.
For further details relating to warranty information of Directed products, please visit the
support section of Directed’s website at: www.directed.com
This product may be covered by a Guaranteed Protection Plan (“GPP”). See your
authorized Directed dealer for details of the plan or call Directed Customer Service at
1-800-876-0800.
920-10011-01 2011-06
18
© 2015 Directed. All rights reserved.
Notes
© 2015 Directed. All rights reserved.
19