Monitoring 100001-20121027 all EN

Monitoring 100001-20121027 all EN
MONITORING
m3/s
A
V
Rh
°C
J
m/s
°F
Pa
g/m3
kW
Data Input
Measurement
Sensors
Dry contacts
www.HW-group.com
Processing
Logging
Analysis, Alarms
Various products
M2M Transfer
XML/HTTP
SNMP, E-mail
GPRS/SMS
Software
Reports
Graphs, Excel
Alarms
Measurement, Sensors
Temperature
Humidity
Energy
Voltage
Current
Pressure
Dry Contacts
Smoke
Flooding
Power
Motion
Gas
30A Current probe 1W-UNI
Current sensor 0 to 20mA,
1W-UNI bus
Door contact MK4
Door contact
Flood detector
Gas Leak Detector
HTemp-1Wire-Box2
HTemp-1Wire Rack 19
HTemp-485 T3419
HTemp-485 T3411
Humid-1Wire (1m, 3m, 10m)
M-Count 2C
Meter 3f ED 310.DB HWG
Meter 1f DHZ 5/63-M-BUS
Motion PIR Detector
PHTemp-485
em
T7410
PowerEgg
PT30-2MPT100 version
Sens-485-UI
Sens-1W-UDI86
Smoke Detector
Temp-1Wire (1m,3m,10m)
Temp-1Wire Rack 19
Temp-1Wire-Flat
Temp-1Wire Outdoor
Temp-485 Box2
Temp-485-Pt100 "Head"
Temp-485-Pt100 "Cable"
Temp-485-Pt100 "Box"
Temp-485-Pt100 "DIN"
Temp-485 Box2
Temp-485-Pt100
version "Frost"
Vibration detector
Voltage sensor 0 to 60V,
1W-UNI bus for monitoring
-48VDC
Voltage sensor 0 to 15V,
1W-UNI bus
HWg-WLD Relay
WLD sensing cable
A - 2+2,10 & 50m
HTemp-1Wire Outdoor 3m
HTemp-1Wire 3m
Sensor Light 1W-UNI 3m
Data Input
Processing
M2M Transfer
Software
Product families
Poseidon
Data Centers
Datová centra
IT
IT
Industrial
Průmysl
Security
Zabezpečení
Poseidon 4002
Poseidon 3468
Complete rack monitoring (19") for data centers.
A single unit with a GSM modem can serve as a SMS gateway
for other Poseidon units in the same building.
Remote monitoring and control for industrial applications. Typical
applications involve monitoring dry contacts, controlling outputs
and measuring temperature/humidity.
Fits on a DIN rail, output relay is 110/230V rated. Can be used as a
local thermostat/hygrostat.
Sensors:
Alarms:
Output:
4x RJ11 - 1-Wire UNI (12 sensors)
Temperature, humidity, current (0-30A AC , 4-20mA),
voltage (0-10V, 0-60V)
E-mail, SNMP Trap,
SMS (GSM modem or SMS GW)
2x relay
Sensors:
Alarms:
Output:
2x RJ11 - 4x 1-Wire (temperature / humidity)
E-mail, SNMP Trap
2x relay (230V / 16A)
Poseidon 3268
Remote monitoring and control of outputs for IT applications
(temperature, humidity, 4x dry contact input, 2x relay output).
Typical applications involve environment monitoring with the
capability to turn on A/C, fan, or perform remote restart.
Sensors:
Alarms:
Output:
4x 1-Wire (temperature / humidity)
E-mail, SNMP Trap
2x relay
Poseidon 2250
Remote monitoring and logging for industrial applications.
Up to 40 sensors, distance up to 1000m (RS-485).
Logs can be e-mailed as attachments every hour.
Suitable for large-scale applications, such as monitoring of
buildings or warehouses, where sensors are tens of meters apart.
Sensors:
Alarms:
1-Wire UNI (10 sensors)
RS-485 (26 sensors).
E-mail, SNMP Trap, SMS (GSM modem or SMS GW)
Poseidon 3266
Economy model for IT SOHO applications (temperature, humidity,
4x dry contact input). Typical applications monitor the
environment, power supply, and access through doors to cabinets
or technology rooms.
Sensors:
Alarms:
Data Input
Processing
M2M Transfer
4x 1-Wire (temperature / humidity)
E-mail, SNMP Trap and SMS (only via SMS GW)
Software
100 002-20120305
100 002-20120305
Data Centers
IT
Industrial
Security
Product families
Damocles
Ares
Damocles 2404i
Remote monitoring for 24 digital dry contact inputs. 4-byte pulse
counter with memory for each input (supports S0 pulse output).
Fits on a DIN rail. Sends SNMP traps to 4 destinations.
M2M protocols: Modbus/TCP, XML (HTTP), SNMP.
Inputs:
Outputs:
Alarms:
24x dry contact
4x relay (max 50V)
E-mail, SNMP Trap
HWg-Ares 14
GSM/GPRS monitoring unit for collecting data from 14 sensors and
2 dry contact inputs.
Designed for remote environment monitoring at any place with
GSM coverage. Contains a battery for several hours of backup.
Data can be read into HWg-PDMS (free software), connected to the
SensDesk Web portal, or delivered to a generic SCADA/NMS system.
We supply a Nagios plugin.
Damocles 1208
Digital inputs and outputs for industrial applications. Fits on
a DIN rail. Inputs feature protection for direct relay connection.
32-bit pulse counting for all inputs, Box-2-Box mode.
M2M protocols: Modbus/TCP, XML (HTTP), SNMP.
Inputs:
Outputs:
Alarms:
12x dry contact
8x open collector
E-mail, SNMP Trap
HWg-Ares 12
Simplified version of HWg-Ares 14. GSM thermometer with email
(GPRS) and SMS alerts. Supports 3 sensors and 2 dry contact
inputs.
Designed for remote environment monitoring at any place with
GSM coverage. Contains a battery for several hours of backup.
Damocles MINI
Digital inputs and outputs for small IT SOHO applications. Inputs
can count pulses. Outputs can be used in the Box-2-Box mode and
controlled over the network by another Poseidon or Damocles unit.
M2M protocols: Modbus/TCP, XML (HTTP), SNMP.
Inputs:
Outputs:
Alarms:
Data Input
Processing
4x dry contact
2x relay (max 50V)
E-mail, SNMP Trap
M2M Transfer
Software
Data can be read into HWg-PDMS (free software), connected to the
SensDesk Web portal, or delivered to a generic SCADA/NMS system.
We supply a Nagios plugin.
Data Centers
IT
Industrial
Security
Product families
HWg-STE
HWg-PWR 3/12/25
Ethernet thermometer with WEB interface and free software.
Two temperature or humidity probes can be connected.
Sends an e-mail alert if the temperature or humidity exceeds a
specified limit.
Supports SNMP, plugin for Nagios.
Supplied with one temperature probe. Versions with PoE or
HWg-Push support are available under separate ordering codes.
HWg-PWR collects values from M-Bus meters and makes them
available over IP. Values can be accessed over the web (charts),
SNMP log, or by e-mail. Operates without a need for a PC.
The device can be used for remote monitoring and metering of
electricity, heat, water or gas consumption using electricity
meters, water meters, gas meters, heat meters and other
sensors equipped with the M-BUS interface (EN 13757).
HWg-WLD
Water flood detector for 2D areas. Ethernet output. When a liquid
is detected anywhere along the sensing cable, alarm is signaled.
Sends e-mail, SNMP trap, or switches a remote relay output over
IP (Poseidon / Damocles).
Supplied with 2+2m detection cable. Supports up to 85 m WLD
sensing cable + up to 100 m extension cable.
HWg-SMS GW
SMS gateway is a central point that all other HW group
products in the same network can use to send alarm text
messages. It works on the hardware level and does not need
any installed software.
IP WatchDog Lite
Monitors functionality of the network interface of two IP devices
(two channels). When a device fails, it is automatically restarted
using a relay. This can solve problems before your customers
even notice them.
Restart can be performed manually over the WEB.
With the PowerEgg unit, a 110/230V device can be power-cycled.
Inputs:
Detection:
Outputs:
Data Input
Processing
PING to 4 different IP addresses
Active/passive PING, active/passive HTML
request
2 channels = relay contacts (powered, NO/NC)
M2M Transfer
Software
Central SMS gateway significantly reduces costs of external
GSM modems, and the entire installation only needs one
SIM card. This greatly simplifies control and saves costs.
Supplied with an external GSM antenna with a 3m cable.
Protocols
Software
HWg-PDMS
WEB
embedded web server
Monitoring software with chart and MS Excel output. Windows application
for collecting sensor and digital input readings over GSM and LAN from all
HW group products.
Export of data in the background, simple analysis and data processing in
MS Excel 2007 and newer.
Flash web GUI
Nagios (plugin)
Cacti
ETHERNET
SNMP
Registered version is free of charge. Periodic export to MS Excel (runs
periodically in the background).
Zenoss
HP OpenView
IBM Tivoli
HWg-PD Trigger
Windows application for processing events (sensor in alarm, contact closed,
device failure). Alarms can be filtered by sensor name and type, just like
e-mail.
Conditions can be tied with actions, such as displaying a pop-up window,
sending a text message, playing a sound, or activating a remote output.
XML Setup (configuration + readings)
XML values (readings only)
XML
PD Trigger works with SNMP traps. Alternatively, it can work as a software IP
watchdog (value/ping).
Wonderware-InTouch
Iconics-Genesis32
Modbus/TCP
Indusoft-Web Studio
Siemens-WinCC
www.SensDesk.com
MII-Control Web
Citect
Web service for collecting data from HW group sensors. Works with all
sensors that support the HWg-Push protocol.
Alarm start
Alarm end
SMTP
(E-mail)
Watch the readings of all your sensors on the web – with no need to install
any software. The base version of the service is free of charge.
Visit www.SensDesk.com to learn more.
Periodical e-mail
XML values & Logfile as attachment
Paessler PRTG Monitoring
Internal or External GSM modem
SMS
"SMS GW" functionality - GSM gateway for
Robust remote monitoring application on the PRTG Network Monitor
platform with the HCVg plug-in installed. This remote monitoring system
satisfies the highest demands of medium and large scale infrastructures.
Features a unique user access with intuitive controls for creating concise
interactive maps according to individual requirements.
GSM
other devices on the LAN
Ring alert
HWg-Push protocol
GPRS
Activated by sensor, not by server
E-mail data transfer
OTHER
XML values & Logfile as attachment
WAP
HWg-SDK
HWg PUSH
HWg-SDK (Software Development Kit) is a set of application examples for
programmers. Example programs simplify the integration of HWg products
with custom software.
HWg SDK
(Software Development Kit)
SOAP
Data Input
Supported programming languages: C/C++, Active X, VB, C#, .NET, Borland
C++, Microsoft C++, Borland Delphi, JAVA, PHP and more.
OPC driver
Processing
M2M Transfer
Software
Data Input
Processing
M2M Transfer
Software
10
HWg-SiteMon5
2
12
16
4
Poseidon 3268,3468
4
4
2
Poseidon 3266
5
4
HWg-STE
2
HWg-Ares 14
14
2
HWg-Ares 12
3
2
*
Damocles 2404i
24
4
Damocles 1208
12
8
Damocles MINI
4
2
HWg-PWR 25
8
25
HWg-PWR 12
8
12
HWg-PWR 3
8
3
PoE version
available
Logger
Modbus / TCP
HWg-PUSH version
available
SNMP Trap
SNMP
E-mail
SMS gateway
compatible
SMS gateway
Ext. GSM modem
support (SMS alerts)
2
3
IP WEB interface
6
M-BUS meters
RS-485
(industrial sensors)
26
Digital outputs
12
Poseidon 2250
Digital inputs
Poseidon 4002
1-Wire UNI support
1-Wire sensors
GSM-GPRS data
LAN interface
Overview
*
HWg-SMS GW
HWg-WLD
*
HWg-WLD Relay
1
IP WatchDog Lite
2
* Different ordering code is required
HW group distributor
Registered office
Business premises
HW group s.r.o.
Rumunská 26
120 00 Praha 2
Czech Republic
U pily 3/103
143 00 Praha 4 - Modřany
Czech Republic
www.lucom.de
LUCOM GmbH
Tel.:
+420 222 511 918
Fax:
+420 222 513 833
E-mail: [email protected]
www.HW-group.com
Elektrokomponenten & Systeme
Ansbacher Str. 2a 90513 Zirndorf
Tel. 09127/59 460-10
Fax 09127/59 460-20
[email protected]
100 001-20121027
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement