Intraplex® NetXpressLX

Intraplex® NetXpressLX
Intraplex® NetXpress LX™
IP Audio Multiplexer
Unprecedented Flexibility in IP Audio Transport
The Intraplex NetXpress IP audio multiplexer has built its reputation for
reliability at the heart of some of the world’s most complex and geographically
widespread IP audio networks. Today, Harris introduces the NetXpress LX™
multiplexer — delivering the same high-performance IP audio platform in a
scaled down, more affordable package.
®
™
Supporting both unicast and multicast, and compatible with the existing
NetXpress, the NetXpress LX system opens up new possibilities in IP audio
network design.
Existing T1/E1 Multiplexer Conversion to IP
Features
CM-30 IP interface module; can convert existing T1/E1 systems to IP
Compatible with Intraplex NetXpress systems
Wide variety of audio, voice and data interface modules
Optional echo cancellation for 2-wire voice circuits
Transport of two contact closures in each direction
Adjustable packet size
Programmable jitter buffer depth
Advanced Intraplex forward error correction
Quality of Service (QoS) priority tagging
Unidirectional or bidirectional unicast streaming
Forget about retiring perfectly good Intraplex systems when moving from T1
or E1 to IP. The new NetXpress LX IP interface module, the CM-30, can replace
the network interface module in existing Intraplex T1/E1 systems, converting
them to IP while keeping the existing chassis with all of its audio, voice and
data cards.
Unidirectional multicast streaming
Intraplex Reliability
Event logging
When the mission is critical, broadcasters turn to Harris® Intraplex audio
transport systems — the standard-bearer for dependable, great-sounding
audio links for “always on” applications.
Built upon the technology of the original NetXpress system, but with a form
factor matching that of our T1/E1 systems, the NetXpress LX multiplexer
provides the reliable and robust performance demanded by studio-totransmitter link (STL) and other fixed, full-time inter-facility applications.
Available in two sizes — a 3RU frame with capacity for up to 17 application
modules and a compact 1RU frame that can hold five application modules —
the NetXpress LX system can also work as an “edge” device along with the
NetXpress multiplexer in large, multisite networks.
Web browser user interface
SNMP-controllable
Current and previous software revision storage
Network statistics monitoring
The NetXpress LX multiplexer provides the superior support and long-term
value expected from Intraplex — broadcasting’s first choice for rock-solid,
full-time operation of IP audio, T1/E1 and 950 MHz audio and data links.
INTRAPLEX® NETXPRESS™ LX
Specifications
Specifications are subject to change without notice.
General
Status and Diagnostics
Shelf Configurations������������������LX-100: 1RU shelf with 5 card slots for audio, voice
and data modules
LX-300: 3RU shelf with 17 card slots for audio,
voice and data modules
Each shelf comprises one chassis, one power supply,
one CM-30 IP interface module and one MA-230
module adapter; the LX-100 contains a single AC
power supply; the LX-300 contains one AC or one
DC supply and can be equipped with a second
power supply for hot-standby redundancy;
audio, voice and data modules optional
Module Compatibility ����������������Accepts Intraplex plug-in audio, voice and data
modules; see individual module specifications for
details and applications
Contact Closures������������������������Two contact closures in each direction
Opto-isolated inputs and normally open relay
outputs
Network Interface
Ethernet Data Rate��������������������10/100Base-T (10 or 100 Mb/s)
Full duplex
Auto-negotiation with network
Network Connections����������������Port 1 — Management — RJ-45
Port 2 — WAN — RJ-45
Circuit Connection���������������������Up to 32 streams/connections
Point-to-point unidirectional
Point-to-point bidirectional
Point-to-point multipoint unidirectional multicast
per IGMP v2
Network Protocols
Supported����������������������������������IP, TCP, UDP, RTP, DHCP, DNS, HTTP, FTP, Telnet,
NTP, SNMP v2c, RTCP, ARP, ICMP, IGMP v2
Timing ��������������������������������������Internal
External, RS-422 clock input
Adaptive to incoming program stream
Timing out, RS-422 clock output
LED Indicators����������������������������Power, normal, alert, alarm
Network performance
Statistics (per stream)����������������Packet loss, packets received, packets sent, packets
dropped, packet count and delay variation
Loopbacks ��������������������������������Received stream loopback, equipment loopback
Remote Management
Web browser user interface
SNMP network management interface
Physical and Environmental
Power Requirement��������������������Universal AC 90 to 240 VAC, 50/60 Hz,
48 VDC, 24 VDC
LX-300 only: optional 48 VDC, 24 VDC
Power Supply ����������������������������LX-100: single 60 W AC
LX-300: single or optional dual 60 W AC,
100 W AC, 50 W, 48 VDC, 50 W, 24 VDC
Power Consumption������������������Depends on number and type of channel modules
installed:
LX-100: less than 15 W typical
LX-300: less than 40 W typical
Temperature������������������������������32° to 122° F (0° to 50° C) operating
(AC powered)
Humidity������������������������������������10% to 90% non-condensing
Dimensions (H x D x W)��������������LX-100: 1RU, 1.75 x 14.25 x 19 in.
(4.45 x 36.2 x 48.3 cm)
LX-300: 3RU, 5.25 x 14.25 x 19 in.
(13.4 x 36.2 x 48.3 cm)
Standard LX-100 shipping carton (contains one 1RU
shelf): 4 x 18 x 20 7/8 in. (10 x 46 x 53 cm)
Standard LX-300 shipping carton (contains one 3RU
shelf): 15 x 20 x 22 in. (38 cm x 50 cm x 56 cm)
Shipping Weight������������������������Depends on number and type of channel modules
installed: LX-100: Less than 20 lbs (7.5 kg) typical
LX-300: Less than 25 lbs (11.4 kg) typical
Regulatory Compliance
Stream Parameters (per stream)
Forward Error Correction������������High, low, off; user-adjustable
Packet Optimization ������������������Packet size/rate, allows control over the inherent
tradeoff between overhead and delay
Jitter buffer depth to 128 packets, provides
compensation in excess of one second of network
jitter
User-adjustable
Quality of Service ����������������������IPv4 Type of Service (ToS) tagging
Differentiated Service (DiffServ)
CE compliant, FCC Part 15 Class A, UL 1950, RoHS compliant
For more information, please visit www.broadcast.harris.com/intraplex.
Harris is a registered trademark of Harris Corporation. Trademarks and tradenames are the property of their respective companies.
Broadcast Communications Division
4393 Digital Way | Mason, OH USA 45040 | Tel: (513) 459 3400
www.broadcast.harris.com
©2010 Harris Corporation
DS_NETXP_LX_0110
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising