6 XS8 is a compact 2-way speaker model with a pri

6 XS8 is a compact 2-way speaker model with a pri
XS8
XS8 is a compact 2-way speaker model with a priority on excellent music reproduction, a very good
efficiency and attractive design.
The internal crossover was designed by a German
company specialised on speaker design, which results not only in excellent sonic performance, but
also in well engineered protection circuits.
Two parallel NL-4 Speakon inputs offer easy daisychaining of the speaker signal. With a switch on
the connection plate the input impedance can be
toggled between 8, 16 and 32 ohms. This enables
the user to run a huge number of speakers on one
single amplifier channel (depending on min. load
and power of the amplifier).
The XS8 offers a great variety of mounting options: Yoke mount for both horizontal and vertical installation is available as well as a discrete
wall support, which allows the installer to tilt and
swivel the cabinets for optimum alignment. Above
that the cabinet is Omnimount® ready for series
30.0 brackets.
Due to the rotatable horn, this model can be used
in vertical and horizontal orientation without suffering from phase interference (e.g. under-balcony
applications).
XS8 is available in black (similar to RAL9005),
white (similar to RAL9010) or unpainted.
Tec Specs
Model
XS8
Power (watts / rms)
150
Rec. amplifier power
150 - 300
Driver
LF-Driver
8“
HF-Driver
1“ on a rotatable horn
Input impedance
8/16/32 ohms
Freq. response(+/-3 dB)
70 Hz - 19 kHz
SPL (1 W / 1 m)
95 dB
Dispersion (h x v)
100° x 50°
Connectors
2 x NL4 Speakon
Cabinet material
Multiplex plywood
Cabinet design
Trapezoidal
Colours available
black, white
Accessories
WB-S
V-Yoke8
H-Yoke8
Special Features
Omnimount ready (30.0)
Dims (H x W x D, cm)
50 x 28 x 27
Weight (kg)
12.5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising