GS-07F-0147T - Laurus Systems
1
GS-07F-0147T
2
LAURUS Systems Inc. is a certified woman-owned small business corporation that specializes in the sales,
service, installation and training of radiation and chemical detection equipment. LAURUS Systems has acquired an expansive customer base in the U.S. and abroad including, federal, state, and local agencies; military installations; national labs; hospitals; and commercial manufacturing and processing entities.
The LAURUS mission is to exceed customer expectations and to take an innovative approach to business
by representing only those manufacturers who share our vision and meet or exceed the following benchmarks:
• First and foremost being responsive to the needs of the customer.
• Provide only high quality, durable equipment.
• Meet or exceed applicable industry standards; mil-specs, ANSI, NRC etc.
LAURUS Systems, Inc. has built a solid reputation on fair pricing, quality products
and understanding and most importantly, responding to the needs of the customer.
We are pleased to offer our products under the General Services Administration
(GSA) Schedules and are part of the H.I.R.E. Multi-State Purchasing Contract.
Staff and Management
LAURUS Systems Inc
3460 Ellicott Center Drive, Suite 101 | Ellicott City, MD 21043
Phone: (410) 465-5558 | Fax: (410) 465-5257
http://www.LaurusSystems.com | Email: [email protected]
1 Alarming Dosimeters
Electronic
Pocket Dosimeters, Personal Radiation Detectors
Dosimeters and PRD’s………….... 3
Hand Held Instruments, Dose Rate Instruments
Contamination Instruments, Probes, Accessories
Survey Instruments…………...… 8
Hand Held Radioisotope Identifiers
Multi-Channel Analyzer, Accessories
Isotope Identification………….... 14
Area Monitors, Vehicle Mounted Alarms,
Personnel Monitors, Vehicle Monitors, Waste Monitors
Portal and Area Monitoring……. 19
Scrap Metal, Recycling, Steel and Metals Industry
Vehicle, Train and Handheld Radiation Monitoring
Scrap Metal and Steel……..……. 24
Constant-Flow and High Volume Air Samplers
Filter Holders, Cartridges, Filter papers, Kits, Accessories
Air Sampling Equipment……….. 27
The Original LAURUS Systems First Response Kits
Radiation and Contamination Control, Custom Configurations
Custom Response Kits……….... 32
Chemical Detection, Explosive Detection
Chemical Identification, The Chameleon
Chemical & Explosives….……… 33
Biological Detection
Biological Sampling, Screening Kits
Biological…………………………. 36
Protective Clothing
Pre and Post Decontamination Kits
Protective Clothing……………… 38
Instrument and Radiation Response Training
Instrument Maintenance, Calibrations, Consulting Services
Services…………………………… 39
2
Laurus Systems offers solutions to training and
performance issues brought about by technological, procedural, or regulatory changes. We
are experienced in the instruments we provide
as well as in the use of these technologies in
the field. Our expertise goes beyond that,
however, as we can provide practical training
for virtually any radiation detection instrument.
Likewise, we can provide programs to help
your staff understand and better respond to the
radiological issues that they will face in sensible and easy to comprehend formats.
Our experienced staff and contract personnel
will help you perform a needs analysis, create
and implement a custom solution tailored to
your needs, determine whether your training
investment is achieving the desired results,
and offer you a number of delivery options.
RAD-60 It doesn’t get any easier than this!
The RAD-60 personal alarming dosimeter is a simple to use stand-alone
device that can be easily configured and programmed with a push of a button.
Unique features include the ability to transform into a
system dosimeter for use with access control programs
and dose tracking systems. Included also are enhanced
EMI shielding and a non-volatile memory function for
retrieval of dose, even during power down.
Push Button Features
• Turn the unit ON/OFF
• Change the display to read dose or
dose rate
• Select form several dose and dose
rate alarm levels
• Turn the chirp function ON/OFF
• Reset integrated dose
• Perform a battery test
3
DMC 3000
Covering a wide range of X-Ray and
Gamma radiation detection, our DMC
3000 Electronic Dosimeter represents
over 25 years of real-world electronic
dosimetry experience, continually
refined through customer feedback.
The unique, high contrast and backlit
LCD display provides a clear indication of wearer’s dose and ambient
dose rate for deep dose equivalent.
More importantly, multiple methods (audible, visual, and tactile) are
utilized to alert the wearer of alarm conditions.
Best of all, the DMC 3000 provides all of this protection, for over 2500
hours of continuous use, with a single AAA battery.
Features
•
•
•
•
•
•
•
•
•
Loud Alarm, 85 dB (A)
Vibrating alarm
Highly Visible Backlit Display
Optional Telemetry
Factory Upgradeable Firmware
Simple 2-Button Navigation
Extended Dose Rate Alarms
Dual UltraBright LED Alarm
Superior X-Ray and Gamma Energy Response
• Meets or Exceeds Applicable IEC and ANSI
Standards
• Designed for Ruggedness and Durability
The DMC 2000 GN takes advantage of a unique
licensed neutron detection technology based an a
large single diode. The full energy range of thermal, intermediate
and high energy neutrons is covered with high sensitivity and very
good gamma rejection; tested to 6 MeV. In addition, a gamma
section identical to the proven technology of the DMC 2000 S,
allows the 2000-GN to measure the gamma dose from 50 keV to
over 6 MeV gamma range with unique linearity to over 10 Sv/h.
DMC-2000 GN
DMC-2000
The DMC 2000 S
features flat energy
response to X-rays and
gamma field from 50 keV
to 6 MeV and linear
response to dose rate fields from natural
background up to more than 10 Sv/h. The
pass-by data exchange feature gives
unequal operational flexibility. In-motion
reading allows dose management by subzone as well as real-time location tracking of
Features
• Visual and Audible Alarms
• User Programmable Dose and
Dose Rate Levels
• System or Stand-Alone
• Optional External AlarmTelemetry-Visual LED Alarm
• Weatherproof-Waterproof
SOR Dosimeters
The SOR was designed and developed as a tactical, durable and versatile
dosimeter. An important feature of the SOR Line is its ability to meet the
needs of various applications with one product. Given its multi-detector
architecture, the measurement range covered is broad, and includes high
level gamma and neutron dose rates as well as low level radiations (L.L.R).
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Dosimeters & PRD’s
4
RADView CT
The RADView™ CT dosimeter badge is a 1.2” x
2.4” plastic radiation dosimeter that provides visual
measurement of absorbed radiation dose to patients who are undergoing CT scans. The RADView™ is radiologically equivalent to soft tissue,
which means that it is effectively transparent to Xrays at the kVp settings used for CT scans, but
nevertheless measures the surface dose from Xray treatments. The RADView™ dosimetry process
employs a self developing radiation sensitive film
that is calibrated for radiation dose.
In the RADView™ PD dosimeter, calibrated dose
threshold indicators surround the radiation sensitive
film in the center of each reference square. The
color of each reference square is calibrated to the
dose printed on that segment. The reference
indications are permanently printed on the badge
and do not change, providing a constant reference
value for each dose level. If the sensitive film in the
center is darker than the background of a square,
Instadose
Instadose™ brings
radiation monitoring into
the digital age. Smaller
than a flash drive, this
rugged dosimeter
provides an instant
read-out when connected to any computer with internet access via
a USB connector.
This revolutionary device provides radiation
workers with complete control over when and
how frequently they get their readings, with
unlimited readings included for one low price.
Based upon patented direct ion storage technology, instadose includes access to each users
historical and current exposure readings. There
is no need to send badges to a processing
center, simplifying administration and reducing
costs.
Sentry
DoseRae2
The Radiation Alert®
Sentry Personal Alarming
Dosimeter and Rate Meter
is designed to ensure the
personal safety of personnel
that work in occupations
with potential x-ray or gamma exposure. The
pocket sized unit has built in memory for
recording data points for the purpose of tracking exposure. The Sentry Software option
enables you to generate incident reconstruction for analysis. The software also enables
you to easily set the vibrating and audio alert to
your desired levels for dose and dose rate.
Use the audio switch to choose between an
audible click with every count taken, or a
discreet silent mode that can be augmented
with the use of headphones.
Great Choice for Radiography!
DoseRAE 2 is
a compact,
direct-reading
and alarming
electronic
personal
radiation
detector. It
uses a diode
and a scintillation crystal to detect X- and
gamma radiation, and provides real-time
monitoring of personal dose and dose rate.
The real-time radiation dose rate monitoring
allows immediate reaction in case of radiation
occurrences and thus reduces the radiation
exposure. By measuring dose equivalent and
dose equivalent rate, this detector provides the
functions of a dosimeter too. It also measures
radiation exposure and exposure rate, which is
appropriate for controlling the exposure of
Direct Read Pocket Dosimeters are rugged, precision instruments about the size
of a pocket fountain pen, which are used to measure accumulative doses or quantities of gamma & X-ray radiation. A metal clip
is used to attach the dosimeter to an individual's pocket or to any available object in an area to be monitored for total radiation
exposure. It is pocket-size, conductive-fiber electroscope with an ion chamber for detecting and indication integrated exposure
to gamma and x-radiation. It has a thin wall which permits the penetration and detection of radiation. If your dosimeter is going
to be used in harsh conditions where scratching of the lens is a concern we recommend a synthetic sapphire window to protect
the lens even in the toughest of conditions.
Direct Read Pocket Dosimeters
Dosimeter Chargers
CT Scan
Dosimeter
Dosimeters & PRD’s
The Handheld Charger can charge a variety of direct-reading dosimeters
by simply squeezing the lever of a generator. The Charger requires no
batteries. By pulling a trigger, a dosimeter is easily placed in or removed
from the charger. The clamping action holds the dosimeter for you.
Model 909 Charger Capable of charging
any self-reading dosimeter. Conforms to
ANSI N322-1997. Operates on one 1.5 V
“D” cell battery.
Contact Us for GSA and Quantity Pricing
Leather & Padded Nylon Dosimeter Holders
•
•
•
•
5
Designed Exclusively for use with Rados Rad-60
Substantial savings on clip replacements and repairs
Less dosimeter “down-time” for your in-house inventory
Unique design allows for secure use on a lanyard, belt, or other utility device
Rad-60 Configuration Kit
Mini Rad-D
The Kit Includes an ADR-1 Reader and Configuration Software and Manual. The Reader
connects to any PC via 9 Pin Serial port. SW works with Windows operating systems.
FEATURES
•
•
•
•
•
The Mini Rad-D is a highly portable, rugged, all-weather radiation detector that’s small
enough to wear on a belt yet powerful enough to quickly locate low-level radioactive sources,
even in a warehouse full of boxes. Designed to discreetly monitor in any environment without
intrusion or disruption of civilian activities, the Mini Rad-D can be set to notify the user by
vibration or audible alarm whenever gamma radiation exceeds natural background levels. The
“Mini’s” simple operation and highly readable display provide an automatically updated
strength indicator in under 1 second, allowing a rapid area sweep to identify the exact location
of any radiation source.
ADR-1
Change Dosimeter Settings
Perform Calibration
Assign Dosimeters
Assign a User ID and Name
Compatible with ACS Access Control Software
DMC 2000 Configuration Kit
LDM-220
The LDM-220 Reader comes equipped with dosimeter configuration software
to manage the DMC 2000 electronic dosimeter settings and thresholds.
LDM 320D & LDM 320W
LDM 320D
LDM 320W
The LDM 320D and LDM 320W readers operate using software
packages installed on computer (PC) and communicate with DMC
3000 dosimeter and DMC 2000 and SOR families in hands-free
data exchange mode.
ACS - Access Control System
For Rad-60 and DMC 2000 Dosimeters, ACSX-press is a state-of-the-art, single license, Windows® based program which provides a dose tracking system and personnel control for restricted
area entries and exits. ACS is easy to use and administer and provides the highest possible level
of control and data integrity.
The “Mini” automatically calibrates itself to the natural background radiation, maximizing its
detection sensitivity in any environment. What happens when the mini detects radiation? It will
alarm or vibrate, depending which mode it is in and display a simple intensity number of a “1”
to a “9” on a large, bright, easy to read LED display. The Mini Rad-D’s simple, single digit,
makes protocol and procedure training as easy as “if it shows a 4 or larger, do this...” The
mini is designed to work in all weather conditions, survive submersion, survive a 3 ft drop onto
concrete, and work in high-density RF environments, including alongside powerful transmitters. The Mini Rad-D uses two AA batteries to provide a battery life of over 2 years used 48
hrs/week.
APPLICATIONS:
SPECIFICATIONS
Function
Detector
Battery Life
Batteries
Response Time
Size
Weight
Environment
Calibration
Calibration Biasing
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Gamma ray detection
Cesium Iodide Scintillator
2+ years @ 48 hrs/week
2 AA Alkaline
<1 second
3.75" x 2.5" 1.25"
6.4 oz w/batteries
Heavy rain, -10°F to 122°F
Automatic when turned on
16-position switch; allows
manual setting for highradiation environments
•
•
•
•
•
•
•
•
•
First responders
Firefighters
Custom agents
Vehicle inspectors
Cargo inspectors
Package inspectors
Scrap Industry
HAZMAT teams
Law Enforcement
Dosimeters & PRD’s
6
nanoRAIDER Z/ZH
When radiation detection capabilities are necessary, operators must rely on the accuracy and
dependability of their instruments. With the highest detector resolution available in a pager-sized
device, the nanoRaider™ virtually eliminates the false alarms and false positives that are so
common to personal radiation detectors. With both detection and identification capabilities available in a single, rugged device, those on the front lines of homeland security can trust the nanoRaider to make their job easier.
About the same size as a cell phone, the belt wearable nanoRaider provides continuous detection capability with
visible, audible and tactile alerts. Once radiation has been detected, the fast identification capability of the instrument
provides essential information to the user in the field, enabling them to make a next step determination. The One
Touch Reachback™ feature integrated into the nanoRaider allows the user to immediately send a notification to team
members, superior officers, situation management personnel, and expert analysts – all with a single push of a button.
The nanoRaider uses uniquely constructed Cadmium Zinc Telluride (CZT) detectors that enable exceptional sensitivity and identification capabilities never before seen in a spectroscopic personal radiation detector (SPRD). The
characteristic design of FLIR CZT detectors is more rugged than scintillation-based detectors and does not require
temperature stabilization. The nanoRaider is also available with an optional neutron detector as well as a full range of
accessories.
Gamma Rae2 & Neutron Rae2
The GammaRAE II R is a gamma radiation detector and full-range dosimeter in a single
instrument. Designed specifically to meet the needs of first responders, it has the rapid
response of a detector and the accurate dose measurement of a dosimeter.
NeutronRAE II is the first personal radiation detector to provide rapid detection of both
gamma and neutron radiation sources even in potentially flammable environments.
Certified intrinsically safe and water immersible for chemical decontamination purposes, the NeutronRAE II can be
safely used in more environments than any other personal gamma and neutron radiation detector.
APPLICATIONS
•
•
•
•
•
•
Customs and border patrols
Law enforcement
Infrastructure Security
Military
Government agencies
HazMat teams & Fire departments
Dosimeters & PRD’s
FEATURES
Combined Detector and Dosimeter
Intrinsically Safe | Immersible
Loud Alarm | Dose Accumulation
RadEye Versatile Family of Devices
RadEye PRD
The so-called “orphan source” phenomena is a serious
global problem as sources showing up unexpectedly at
border crossings, or numerous other public locations are a
significant potential threat. The RadEye PRD represents a
high performance measuring device for anyone responsible
for finding radiation sources whether they be first preventers
(border guards, customs agents, special forces or counter
terrorisim teams) or first responders (emergency services
and law enforcement). The RadEye PRD is 5000 - 100000
times more sensitive than a typical electronic dosimeter.
When looking for Nuclear Weapons, Improvised Nuclear Devices (IND's) or
Radiological Dispersal Devices (RDD's or dirty bombs), it is of paramount importance
that you have high sensitivity with high selectivity. It is the only instrument of its type
and size to achieve this. The RadEye PRD incorporates a high sensitivity NaI(Tl)
scintillation detector with a miniature photo-multiplier allowing the detection of very low
radiation levels with particular emphasis on gamma emissions below 400 keV.
RadEye GN
The Thermo Scientific RadEye GN Gamma Neutron Pager
combines the superior performance of the Thermo Scientific
RadEye PRD Gamma Pager with a very high neutron sensitivity that exceeds the time-to-alarm requirements of ANSI 42.32
and IEC 62401. It is now even more capable of differentiating
artificial sources from NORM than previous RadEye™ PRDs.
The RadEye GN identifies to the user whether the alarms are
due to gamma or neutron by a different colored alarm LED,
different tones and flashing the count rate/dose rate display readings with an inverted
display background of the alarming channel or both channels as appropriate. The
RadEye GN also has different audible alarms, discriminating between elevated
background/NORM and any artificial isotope alarm. The gamma and neutron audible
alarms are clearly different. This gives the RadEye GN audible and visual identification using NBR of the type of material detected.
Contact Us for GSA and Quantity Pricing
RadEye PRD ER
7
Special proprietary circuitry allows for energy compensated dose and dose rate
measurement up to 100 mSv/h (or 10 rem/h). Thus the RadEye PRD-ER is the
ideal tool for both interdiction and response. Unlike instruments using 2 different
detectors for the low dose rate range and the high dose rate range, the single
detector arrangement in the RadEye PRD-ER offers the following unique
advantages over the whole measuring range:
Consistent angular dependence andenergy response
No transition range with annoying hysteresis effects
No high activity source for function test of high dose rate detector required
RadEye PRD N/NL - Neutron Version
The RadEye N closes a gap in the classical product spectrum of the
radiation measurement technology. Rem-Counters for neutron detection with
a He-3 or BF3 tube are usually heavy and bulky since fast neutrons have to
be moderated in order to be detected and to provide the correct neutron
dose rate response. Low energy neutrons with their lower biological impact
however have to be suppressed to a large extent. Thus the rather low
sensitivity of Rem- Counters to pre-moderated neutrons can be explained.
Dropping the demand for energy compensated dose rate response, a device
can be built with one fiftieth of the weight and comparable or even a higher
neutron response as compared to a Rem-Counter.
The RadEye G is a light-weight and very rugged
instrument designed for quick and reliable measurement
of gamma dose rates. Modern electronic circuitry
guarantees excellent linearity over 6 decades of radiation intensity:
from background level to 10 R/h - with overrange indication up to
1000 R/h. It incorporates a large energy compensated GM-tube for
precise dose rate measurement for gamma and x-ray.
RadEye G Ex
In emergency response and in industry flammable and explosive materials like
gases, dust and fibers can occur. In such potentially explosive atmospheres it is
necessary to use ATEX certified devices for your measurements.
A Higher Sensitivity RadEye
The RadEye G Ex radiation detector series comprises 4 versions of intrinsically
safe handheld devices for gamma and dose rate measurements. They are
designed according to the latest ATEX standards to meet the needs of their
operator in and around hazardous
areas.
APPLICATIONS
The dose rate capabilities of the high range RadEye versions
GF-Ex and GF-10-Ex radiation detectors are designed to
exceed the higher set points required for “Emergency Response Life-Saving Turn Around” situations.
Devices certified as „intrinsically safe“ are designed to be
unable to release sufficient electrical or thermal energy to
cause ignition of flammable materials like gas, dust or particulates.
•
•
•
•
•
•
Emergency services
Fire brigades
Hazmat teams
Locations with risk of explosion
Refineries
Oil platforms
The PDS-100G is a sensitive pocket-sized device designed to detect, locate
and quantify any radioactive materials as Special Nuclear Materials or as
Radiological Dispersal Devices (RDD), in a very short time. The PDS-100G
features the capability to transmit the measurement and the spectrum on request. It has been designed
specially for first responders. law enforcement, customs inspectors and for personnel and site security in
critical infrastructures.
PDS 100 G
RadEye G/G-10
RadEye G-10 version incorporates a different energy filter in order to
achieve a Sievert response curve according to ambient equivalent
dose rate H*(10). There is also a PTB* type tested and approved
version available. The intelligent ratemeter algorithm (ADF mode) guarantees that even the smallest
changes in dose rate are immediately detected, while at the same time, random fluctuations are
effectively suppressed.
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
FEATURES
•
•
•
•
•
•
•
•
•
•
Small, rugged, compact, user-friendly
High sensitivity and fast response time
Embedded identification, automated & manual mode
Visual, audio and vibration alarms
Wireless communication interface
Detection; search; identification mode
Source indication alarm and danger alarm
Easy-to-read display (OLeD technology)
100 512 ch/50 1024 ch. spectra and >1000 events
IRDa and Bluetooth® technology communication
Dosimeters & PRD’s
RDS-30 Survey Meter
8
RDS-80/80A Contamination Meter
The RDS-30 Pocket Radiation Survey Meter is a versatile gamma
radiation detector designed for a wide range of applications
involving the detection of abnormal or elevated radiation levels.
Compact, lightweight, waterproof, its performance and its user
friendly interface make the RDS-30 perfectly suited for radiation
professionals and emergency responders for field radiation surveys and for monitoring and detection of radiological hazards.
The RDS-80/80A Pocket Surface Contamination Meter is a rugged, versatile
contamination instrument designed for a wide range of radiation detection applications. It is suitable for use in the nuclear industry, emergency response, interdiction operations or any environment where the possibility exists for abnormal
contamination levels to be present. The unit combines contamination detection
measurement with alarm functions and automatic conversion to activity values.
Additionally, there is a histogram stored in the meter’s internal memory. The
RDS80 will also display in Bq/100 cm2!
High Range - Durable - User-Friendly
SPECIFICATIONS
• Radiation detected:
• Detector:
• Dose Rate
measurement range:
• Dose rate linearity:
•
•
•
•
Calibration accuracy:
Energy response:
Angular response:
Dose measurement
range:
SPECIFICATIONS
• Radiation detected:
gamma and X-ray from 48 keV to 1.3 MeV
energy compensated GM tube compliant to H*(10)
from 0.01 μSv/h to 100 mSv/h or from 1 μrem/h to 10 rem/h
± 10 % or ±1 digit within the range 0.1 μSv/h to 100 mSv/h
or 10 μrem/h to 10 rem/h
± 5 % of the reading in 137Cs exposure, at 3 mSv/h, +20°C (68°F)
± 30 % over the range of 48 keV - 1.3 MeV
± 15 % within ± 45 % from the calibration direction at 48 keV
from 0.01 μSv to 1 Sv or from 1 μrem to 100 rem
RO-20 Ion Chamber
The Model RO-20 is a portable air ionization chamber instrument, used to detect
beta, gamma, and x-radiation, with five linear ranges of operation to measure
exposure from background to 50 R/h full scale.
Proven Technology - The Industry Workhorse
The ionization chamber is vented to atmospheric pressure and is specifically
designed to have a flat energy response into the x-ray region. The detector is fully
temperature compensated, eliminating any need for temperature correction.
A single rotary switch turns the instrument off, checks the batteries, checks the
zero setting, and selects the range of operation. An ergonomically located switch
illuminates the meter. Internal switching of ranges is accomplished with reed relays, eliminating the
mechanical swing arms typically used with portable ion chamber survey instruments.
Survey Instruments
• Detector:
• Measurement range:
Available in a
Custom Kit!
• Alarm levels:
• CPS linearity:
• Power supply:
• Electromagnetic
alpha >2 MeV, beta >100 keV, gamma and x-rays
from 5 keV to 1.3 MeV
end window GM tube
surface contamination 1 to 100 000 cps
or 0.01 to 100 000 Bq/cm2
freely adjustable alarm levels for contamination level
±15% ±1 digit within the range of 10 to 100 000 cps
the Bq/cm2 display is calculated from cps values by
multiplying with sotope coefficient
2 alkaline batteries IEC LR6/AA size (recommended)
compatibility: CE compliant
The RAM ION X DigiLog
provides a very straightforward, fast and reliable method of collecting and storing survey
data on site for later use.
RAM ION X
The RAM ION X can read bar code labels that identify measurements location. The measurements data combined with their
locations, data and time are stored in a built in memory. The
stored data Records can be downloaded by the SMARTS
(Survey Mapping Automated Radiation Tracking System) software or manually for custom applications.
The RAM ION X Is ideal for use in nuclear medicine (X version) ,
radiography (X version), radiotherapy facilities (X version),
nuclear research Centers and in other industrial applications
Contact Us for GSA and Quantity Pricing
9
DSM-500
This microprocessor-controlled instrument represents the new
gold standard of survey instruments. The DSM-500 boasts an
oversized digital display and a unique capability for dual probe
capability. Comes standard with timed count capability, probesaturation and error indicators.
DSM-502
The DSM-502 Survey meter is designed as the perfect
application for general users of radiation measurement and
monitoring. It's mid-range internal detector allows for the
perfect combination of accuracy, simplicity and functionality
for the reliable and consistent measurement of dose.
DSM-506
The operation of the DSM-506 provides
users the ease of an internal detector with the additional probe
capability for those specific measurement needs. This feature, with
its easy to read display, digital electronics and rugged design make
the 506 a perfect instrument for all applications.
The DSM-525 is the most functional survey instrument on the market with its dual probe capability.
This dual connection capability allows users the
luxury of multiple level measurements with as many
as four different probes calibrated to each measurement type. No more retracking to the instrument
case to switch probes.
DSM-525
Features
DSM Probes
WB Johnson Instruments has a rich history in manufacturing radiation
detection instruments. Our products are some of the most well known
radiation detection products in the world. In 2011, we launched our new
product line, focused on meeting the demand for a dependable and
accurate radiation detection instrument. We offer a full and complete line
of our DSM Probes for all of our handheld instruments.
•
•
•
•
•
•
Auto-Ranging Display
Large Easy-to-read Digital
Display
Dual Probe Capability for
both Dose and
Contamination Monitoring
ERK-525
The ERK-525 is a complete, portable radiation monitoring system designed to measure a broad range of radioisotope contamination under field conditions. The system contains a state of the
art, microprocessor based digital display meter that auto ranges and can detect most of the common alpha, beta & gamma radiation that is likely to be present in an emergency situation. The
DSM-525 is a dual probe survey meter that measures contamination and dose levels from micro-R to 200 mR/hr levels of gamma isotopes (Based on 137-Cs calibration). The Instrument and
accessories are contained in a very durable water resistant carrying case for easy storage and portability. The ERK-525 does not require changing probes to obtain the full operational benefits
of the system. The user needs only to turn the selector switch to the desired probe and the rest of the operation is automatic.
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Survey Instruments
The RadEye SX is a modern compact multi-purpose survey
meter for external scintillator counter tubes. General count
rate and surface contamination measurements can be performed as well as dose rate measurements. As part of the growing RadEye product family of high-end standalone meters, the
RadEye SX is designed to exceed the most demanding user expectations.
RadEye SX
Due to the clear and large display all essential functions and software parameters can be
easily accessed. The display and the alarm-LED can be seen while the instrument is worn in
the transparent case.
RadEye G20 Variants
The RadEye G20-10 and G20-ER -10 are excellent gamma
survey meters with a flat energy response curve from 17 keV to
1.3 MeV according to ambient equivalent dose H*(10). The
versions G20 and G20-ER are equipped with a different energy
filter in order to yield an energy response for dose rate measurements in R/h.
FEATURES
•
•
•
•
•
•
•
•
Light Weight (300 g), excellent grip with and without gloves
Rugged and compact design, thick rubber protective cover
> 500 h operation time with 2 AAA batteries – rechargeable NiMH-cells can be used
Menu-driven user interface results in low training cost and immediate familiarity
Huge internal data memory for both scaler results and continuous data recording
Bright backlit LCD display – plain text messages - different languages can be selected
Audible indication: single pulse or chirper mode proportional to count rate
Earphone output for operation in loud environment
RadEye PX
The RadEye PX is a modern compact multipurpose survey meter for proportional
counter tubes. General count rate and surface contamination measurements can
be performed as well as dose rate measurements, typically with He-3 or BF3
based Rem-counters.
Survey Instruments
10
The RadEye B20 is a modern compact multi-purpose
contamination meter for alpha, beta, gamma and Xray radiation. By virtue of optional gamma energy filters, deep or shallow dose rate measurements from 17 –
1300 keV can be performed. For emergency response purposes alpha and beta contamination can be discriminated using another optional filter. The instrument is part of the growing RadEye family of high-end standalone meters, which are designed to exceed the most demanding user expectations.
RadEye B20 Variants
FEATURES
•
•
•
•
•
•
•
Light Weight (300 g), excellent grip with and without gloves, rugged and compact
500 h operation time with 2 AAA batteries – rechargeable NiMH-cells can be used
Menu-driven user interface results in low training cost and immediate familiarity
Huge internal data memory for both scaler results and continuous data recording
Bright backlit LCD display – plain text messages - different languages can be selected
Easy adaptation to different tasks by supervisor: figuration, calibration, selection of measuring units
Versatile operation modes:: Scaler/Timer - Continuous rate meter mode for frisker operation - Dose rate
mode
• Audible indication: single pulse or chirper mode proportional to count rate
• A table of up to 15 nuclides can be loaded for display in Bq or dpm
RadEye AB100
The RadEye AB100
is a modern contamination meter for
surface contamination measurements with
excellent alpha/beta discrimination. The user
can select the proper calibration factor within
a list of isotopes (e.g. Bq, Bq/cm², dpm). The
instrument is part of the growing RadEye
family of high-end stand-alone meters, which
are designed to meet the most demanding
user expectations.
FEATURES
•
•
•
•
•
•
•
•
•
•
Light weight , rugged and compact design
1,000 h operation time using 2 C batteries
Menu-driven user
Huge internal data memory
Bright backlit LCD display –
Different languages can be selected
Easy adaptation to different tasks by supervisor configuration
Audible indications
Earphone output
Easy to use, no PC required
The RadEye™ NBR is a combination of the Thermo Scientific RadEye SX multipurpose meter and the FHZ 674 NBR detector. Even in case of large variations of
the natural background during the search, very small contributions of artificial
gamma radiation can be detected by a NBR detector
(Natural Background Rejection).
RadEye NBR
Contact Us for GSA and Quantity Pricing
11
Gamma Laboratory Kit
With RadEye PRD
The mobile Thermo Scientific Gamma Laboratory
Kit allows immediate, local response to emerging
food monitoring requirements for known contamination scenarios.
Highly Sensitive Gamma Lab Kit
With RadEye SX
The portable Thermo Scientific Highly
Sensitive Laboratory Kit supports the
laboratory and also field measurement
program for contamination resulting from a
nuclear accident. The Highly Sensitive
Laboratory Kit combines a 1.0 l Marinelli
beaker with the 2x2“ NaI(Tl) probe model
SPA-3. Data evaluation and display is performed by the low power RadEye SX multipurpose meter. This combination allows low
limits of detection within short measurement
time.
RadEye HEC
FH40- Survey Meter
The FH 40 G family of advanced digital survey meters is designed for many different
radiation protection applications. The FH 40 G is rugged, lightweight, fits snugly in the
palm of the hand and is easy to operate with large keys that enable users to wear gloves.
Internal diagnostics ensure proper functioning of the detector(s) and the electronics. If the
battery voltage falls below a pre-defined value, an icon on the display flashes giving the
user 20 hours of remaining use before replacing the batteries.
Alarm values are established for dose rate and integrated dose. When an alarm value is
exceeded, an audible alarm is emitted. In parallel to the measured value display, an
audible speaker can be activated to signal detector pulses.
The FH 40 G models are designed to record up to 256 data points containing measurement number, date, time and dose rate at the internal detector and external detector,
status, and barcode information.
FH40– TG Teleprobe
The Teleprobe FH 40 TG can be used with a display unit FH 40 G-X or together with any of the FH 40 G. In
this case the FH 40 System allows the simultaneous dose and dose rate measurement at the operator’s
location while measuring the dose rate at the teleprobe end; up to four (4) meters away.
FHZ 672 E / 672 E-10
For fast discrimination of natural and artificial gamma radiation.
The FHZ 672 E consists of a special detector of 750 cm³ organic
scintillation material of integral line construction, voltage divider,
high voltage generator, amplifier and discriminator thresholds
and NBR process computer. The indication of artificial radiation is
shown by LED on the probe, as well as visually in the display and
audibly by the speaker in the instrument body.
The RadEye HEC is a sample counting system that provides
simultaneous alpha and beta measurements. The system
incorporates a 2" (5 cm) dual scintillation phosphor mated to
a sliding drawer accommodating a 2" (5 cm) diameter sample. Using a height-adjustable sampling area the drawer
permits the use of different sample types and must slide fully
to the rear to initiate the counting.
FHZ 672 E
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Version FHZ 672 E-10: Energy response according to ambient
dose equivalent rate H*(10)
Survey Instruments
12
Inspector & Inspector EXP
The Inspector is a small, handheld microprocessorbased instrument that offers excellent sensitivity to
low levels of alpha, beta, gamma, and x-rays. The
digital readout is displayed with a red count light and a
beeper sound with each count detected. Other features include an adjustable timer and external calibration controls.
The Inspector EXP was designed for the requirements of emergency response personnel. It has the
same valuable features, small size, and quality of the
Inspector, but instead of the built-in detector, it has the
added versatility of an external probe with a convenient carrying case
that attaches to a
belt or grommet.
Excellent for Low Level
Alpha/Beta/Gamma
Contamination Monitoring
Observer Software
The Observer software runs on a Windows platform and can be
used with the Inspector, and Geiger Radiation Monitors. As an
option, any of our Radiation Alert® instruments can be modified
to interface with the Observer. The Observer reads in Counts,
CPM, and CPS and has the ability to collect, log, and perform statistical analysis on the
data received. The data is displayed on a graph as well as digital and analog on-screen
meters and can be saved or printed in various ways including a spreadsheet format. The
dwell/count time can be adjusted for each point on the graph. You can also set the length of
time for the count. The on-screen meters in the software have adjustable settings as well as
a settable alarm in CPM. There are both visual and audio indicators, and you can play the
meter click through your PC speakers.
Survey Instruments
Teletector 6112M
The Teletector 6112M is a portable, battery operated dose rate meter designed to
measure photon radiation (gamma and X-radiation), and to detect beta radiation.
Two GM counter tubes serve as detectors. The stainless steel telescope can
extend up to four meters and its tip carries the two tubes. The tubes are placed
along the axis one behind the other; a groove marks the center of each tube. The
low End tube detects beta radiation and together with the high end tube the
Teletector covers a dose range from 10 µR/h to 1000 R/h (0.1 µSv/h to 10 Sv/h),
where it automatically switches between the two tubes.
FEATURES:
The Original Extending Detector
•
•
•
•
•
•
•
•
•
•
Microprocessor controlled dose rate meter with telescope to measure gamma radiation and to detect beta radiation.
Illuminated fully graphic LCD for analog and digital display of the measured value.
Measuring quantity: Photon Dose Equivalent Rate Hx
Safety by distance: telescope extendible up to 4 m total
Wide dose rate range from 10 µR/h to 1000 R/h (0.1 µSv/h to 10 Sv/h)
Display units: Roentgen (R), Sievert (Sv) or Gray (Gy)
Automatic range switching, time constants adjustable
Simultaneous measurement of dose rate, dose, dose rate mean value
Programmable dose rate and dose alarm threshold.
Storage of up to 450 measurements including location, dose rate, time, duration and standard deviation of measurement.
• Serial transfer of current measurement and stored measurements to a PC.
6150 AD5/Ex
The 6150AD5/Ex is a portable, battery operated dose rate meter to measure
photon radiation (gamma and X radiation). It is especially designed to be used in
Ex-areas. An Ex-area is a hazardous location which may contain a fire or explosion hazard due to the presence of inflammable substances (gases, vapors,
combustible dust).
A built-in GM counting tube (type ZP1310) serves to measure dose rates up to 1
Sv/h. At dose rates lower than 0.2 mSv/h dose rate indication fluctuates by more
than 5% around its average value making accurate readings more difficult.
Therefore, the probe 6150AD-18/Ex is available as an optional accessory for low
dose rates. The probe connects to the meter through a probe cable of up to 10 m
length. The probe 6150AD-18/Ex has a larger counting tube (type ZP1200) which
only covers dose rates up to 10 mSv/h, but which is better suited for low levels
because of its higher sensitivity.
Contact Us for GSA and Quantity Pricing
13
The new RDS-31S/R Multipurpose Survey Meter is part of
the RDS family of RADOS survey
meters and offers modern design and an advanced approach to radiation monitoring. The RDS-31 features
outstanding ergonomics; it is lightweight and easy to
handle with visual, audible and vibrating alarms.
RDS 31
The large LCD screen includes an automatic illumination
control feature with an energy saving backlight that can be
easily read in total darkness and in direct sunlight. To
make the instrument even easier to use, the buttons can
be configured with easy to understand Shortcuts. The Shortcuts allow the user a
straightforward and simple way to configure the instrument for performing repeated
operations such as the Manual Histogram, Sample Collection, Dose Value Display,
and Diagnostics. In addition, to help the users to become accustomed to the
Shortcut-function, a Visualization display function can be employed.
With a simple cable connection to existing RADOS probes, the capabilities of the
RDS-31 can be extended to include the detection and measurement of other types
of radiation. The meter provides an additional protective function to the user: while
using external probes, the meter is simultaneously measuring the dose rate with its
internal detector. This is all done in the background and an alarm is triggered in the
event of a dose rate or an accumulated dose exceeding the alarm thresholds.
All the Mirion external probes can be connected to the RDS-31 with the cable
adapter and are automatically detected.
FEATURES
•
•
•
•
•
•
•
•
•
H*(10) ambient dose equivalent dose and dose rate
Existing GMP-series external detectors can be used with suitable adapters
New ergonomic design
Large screen, configurable backlight with automatic illumination control
High impact durable case construction, IP-67 immersion proof
Internal memory to store measurements
Flexible histogram functions
Firmware of instrument upgradable through cable link
Configurable short cut function
GMP-11
External Beta Probe
Radiation detected:
Energy range:
Detector type:
Measurement range:
End window active area:
Window thickness:
Sensitivity:
Max dead time:
Self count rate:
Gamma,
beta and alpha rays
Gamma > 30 keV,
Beta > 100 keV,
Alpha > 2 MeV
Halogen quenched GM tube
(type ZP 1430 or equivalent)
0 to 10 000 cps
6.1 cm2
1.5 - 2 mg/cm2
1.0 cps for uniform 90Sr/90Y
source of 0.37 Bq/cm2
230 µs
25 cpm
GMP-15
Pancake Beta Probe
Radiation detected:
Energy range:
keV,
Detector type:
Measurement range:
End window active area:
Window thickness:
Sensitivity:
source of
Max dead time:
Self count
Gamma, beta and alpha rays
Gamma > 30 keV, beta > 100
Alpha > 2 MeV
Halogen quenched GM tube
(type 7312 or equivalent)
0 to 10 000 cps
15.5 cm2 (2.4 in2)
1.5 - 2 mg/cm2
2.8 cps for uniform 90Sr/90Y
0.37 Bq/cm2
40 µs
Rate:30 cpm
Optional RDS Probes
GMP 12H/12L
External high dose rate gamma probes
Radiation detected:
Energy range:
Detector type:
Measurement range*:
Dose:
Dose rate:
Calibration accuracy:
Energy response:
Dose rate linearity*:
Directional response:
GM tube sensitive length:
gamma and x-rays, according to ambient dose equivalent H*(10)
80 keV - 3 MeV 12H, 50 keV - 3 MeV12L
halogen quenched, energy compensated GM tube (type ZP 1304 or equivalent) 12H
halogen quenched, energy compensated GM tube (type ZP 1202or equivalent) 12L
1 µSv – 10 Sv 12H; 0.01 µSv - 10 Sv 12L
0.1 mSv/h – 10 Sv/h 12H; 0.05 µSv/h – 100 mSv/h 12L
±5% of the reading in 3 mSv/h Cs-137 exposure at +20°C (68°F) 12L
± 5% of the reading in 300 mSv/h Cs-137 exposure at +20°C (68°F) 12H
±15% over energy range 80 keV – 1.25 MeV, (+95% at 6 MeV) 12L
±20% +30% over energy range 50 keV - 1.25MeV, (+95% at 6MeV) 12H
±15% over the range 1.0 mSv/h – 10 Sv/h 12L
±15% over the range 0.10 µSv/h – 100 mSv/h 12H
±15% within ± 180° horizontally from the calibrationdirection.±30%
within ± 45° vertically from the calibration direction
7 mm (0.27 in) 12L; 40 mm (1.57 in) 12H
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Survey Instruments
14
identiFINDER 2
The FLIR identiFINDER 2 is a logical extension of the original identiFINDER series of handheld radioisotope identification detector (RIID)
instruments. The thousands of identiFINDERs currently deployed
worldwide have provided FLIR with a tremendous resource for suggestions and comments on how to improve the already exceptional identiFINDER. The identiFINDER 2 is the result of these comments and
suggestions.
The monochrome LCD display has been replaced with a TFT LCD, 64k
color, 320 by 240 pixel display that is readable in virtually all light
conditions. The spectrum is continuously LED peak stabilized to handle
a wide range of count rates and conditions with no peak interference in
the identification spectrum. Wired communication uses a micro USB
connector, USB 2.0, or wireless via a Class 2.0 Bluetooth© interface, with a 33 ft (10m) range, which supports
the reach-back capability, also provided. A Web interface is provided via USB emulated TCPIP (LAN) for
monitoring and configuring the identiFINDER 2. A twelve channel, Sirf III GPS is included for incident location.
Data storage has been enlarged to 1 GB to save more spectra and event information.
Unchanged are the size, shape and weight; the three button (4th for
power) operation; the scintillation, neutron and GM detector types, sizes
and sensitivities; the screens menus, when operated in the original
identiFINDER mode; the types of alarms; the radionuclide identification
accuracy; and the reliability, support and service.
Very much the same as the 10,000+ deployed original identiFINDERs
TFT LCD 64k color display
LED stabilized
2 channel, Sirf III GPS
Reach-back via Bluetooth© connected to DUN capable cell phone
ANSI N42.42 output format
Web interface for monitoring and configuring instrument
Original three button operation
1 GB event data storage
Visible, audible and tactile alarm annunciators
Embedded Windows CE operating system
Meets ANSI N42.34 shock conditions
Isotope Identification
The radHUNTER is an extremely sensitive and accurate
digital hand-held gamma radionuclide identification device
(RID). It is the culmination of over eight years of development
of micro-miniature, digital signal processing electronics;
operating power conservation; and advancements in the
scintillation detector, radionuclide template matching identification algorithm. The radHUNTER development was supported in part by the U.S. Government.
Fast Detection and Identification
The radHUNTER is able to quickly detect, rapidly locate,
accurately measure and precisely identify sources of contamination from their gamma radiation signature. The radHUNTER
uses a 0.75" thick by 4" diameter NaI(Tl) detector. This large cross section provides an excellent source
to background ratio which rapidly locates gamma contamination. It comes with a GM tube for high
gamma dose rate measurements and an optional sealed 3He detector with moderator for neutron
detection. Each instrument is supplied in a carrying case with belt holster, wrist strap, battery pack and
recharging unit.
Reliable and Accurate
The radHUNTER operating system and user interface is based on the proven identiFINDER 2 technology. The radHUNTER has been developed to correct for environmental conditions and other influences
during field operation. The instrument performs an automatic calibration verification while powered up
using intrinsic radiation and it is continuous stabilized during operation.
FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
radHUNTER
F E AT U R E S
The Original
identiFINDER is still
available by special
request.
•
•
•
•
•
•
•
•
•
Hand-held Radionuclide Identification Device (RIID)
Quickly survey trucks, cargo containers, cars, etc. for the presence of radiation
Rapidly determine the primary location of the radiation
Determine the Isotope identification in as little as a few seconds
Categorizes the radiation as Innocent, Suspicious or Threat
Alarms on dose rate changes above background
Continually stabilizes for temperature and other conditional changes
Visible, audible and tactile alarm annunciators
Reach-back via Ethernet with event data
Contact Us for GSA and Quantity Pricing
15
nanoRaider
Rad-ID
The Rad-ID™ offers public safety and federal agencies a highly accurate and
reliable in-field tool to detect, identify and quickly classify radiological hazards as to
exact isotope, dose rate and location of greatest concentration. Over 110 Medical,
Industrial and SNM isotopes of significance are included in the extensive radiation
library. Designed to be rugged and easy to operate, the Rad-ID can rapidly provide
critical isotope identification for non-technical users and extensive analysis for
highly trained personnel within minutes. An IrDA and a Bluetooth® wireless interface allows uploading of data via email / internet as well as downloading additional identification criteria
to the search library if required.
FEATURES
• Available in two versions- Z (gamma) and
ZH (gamma./neutron)
• Transflective color display
• 24 hour battery life
• IP63 compliant enclosure protection
• Data storage for up to 600,000 identifications and spectra
and over 1 million alarms
• ANSI N42.48 compliant
• Standard ANSI N42.42 data output format as preferred by
triage teams as well as the government and scientific
communities
When radiation detection capabilities are necessary, operators must rely on the accuracy and
dependability of their instruments. With the highest detector resolution available in a pagersized device, the nanoRaider™ virtually eliminates the false alarms and false positives that
are so common to personal radiation detectors. With both detection and identification capabilities available in a single, rugged device, those on the front lines of homeland security can trust
the nanoRaider to make their job easier.
BENEFITS
• Designed and built to meet the most rugged field
environments
• Easy to read display, even in bright sunlight
• High resolution in a small device
• Ease of use in high background environments
• Highly reliable, accurate results
• Small enough to be carried on a belt or in a
pocket
• User interface almost identical to other FLIR
radiation detectors, such as the identiFINDER®
• Virtually eliminates the false alarms and false
positives inherent in other personal radiation
detectors
About the same size as a cell phone,
the belt wearable nanoRaider provides continuous detection capability
with visible, audible and tactile alerts.
Once radiation has been detected,
the fast identification capability of the
instrument provides essential information to the user in the field, enabling them to make a next step
determination. The One Touch
Reachback™ feature integrated into
the nanoRaider allows the user to
immediately send a notification to
team members, superior officers,
situation management personnel,
and expert analysts – all with a single
push of a button.
The Rad-ID is now available in four variants including a standard gamma only, and enhanced gamma
and gamma/neutron versions. The Rad-ID is still the best choice for easy and accurate gamma and
neutron isotope identifications.
Superior Neutron Capability - User Friendly
SPECIFICATIONS
Four Rad-ID Variants
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Rad-ID G—Four (4) CZT array, 24.4 cm3 NaI(Tl) crystal, and GM tube
Rad-ID Plus—Eight (8) CZT array, 24.4 cm3 NaI(Tl) crystal, and GM tube
Rad-ID GN—Four (4) CZT array, 24.4 cm3 NaI(Tl) crystal, GM tube, and large volume (83 cm3)
He3 detector for high-probability neutron detection
• Rad-ID GN-Plus—Eight (8) CZT array, 24.4 cm3 NaI(Tl) crystal, GM tube, and large volume
(83 cm3) He3 detector for high-probability neutron detection
4096 channel MCA
Constant radiation level readout for user safety
User expandable identification database
Wireless & IrDA communication allows data to be downloaded and emailed instantly
High resolution, 65,000 color, 3.6” display (320x240), backlit for easy reading
Comfortable shoulder-strap for extended use Adjustable alarm levels
IP 65 Compliant as described in IEC529
Operational outside temperature range: 5° F to 130° F
Thermally corrected sensors
Auto-scaling Display
PC communication software
User selected measurement units
Dimensions: 4” x 5.4” x 11.1”
Weight: 5.7 lbs, including batteries
Operates on 3 “D” cell batteries with an operational life of 12 hours or longer
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Isotope Identification
16
MEDSpec
The MedSpec portable Fast Responding Gamma Spectrometer and
Dose Rate Meter will instantly measure any material for the presence of
radioactivity whether it is general waste, medical waste, scrap metal or
recycled material. Operation of the MedSpec is completely automatic
once the easy-to-set operational parameters have been selected.
Simply position the unit in close proximity to the object that needs to be
scanned and listen for the varying audio alarm to sound and/or the
displayed readings to increase. The MedSpec scans suspect material
and quickly analyses to determine if and what radio-isotope is present
then further categorizes the result as Medical, Industrial, or Natural
Occurring Radioactive Material (NORM).
The user selectable readout on the instrument display will show the
desired units of measure such as Counts per Second (CPS), DoseRate (Sv/h, R/h) or Accumulated Dose (Sv/R). The MedSpec stores all results in a record which can
be downloaded via USB into the user-friendly RadCom MedSpec software for information archiving
and further data manipulation and analysis. Reports can be saved in Adobe® PDF format and
emailed via user’s PC. Remote service diagnostics and software updates of the MedSpec are also
achieved by utilizing the RadComm software.
The SYCLONE is a highly sensitive handheld GammaRay spectrometer capable of identifying single or multiple
isotopes simultaneously. The SYCLONE also provides the user with
various functions such as Search and Find, Optional Neutron Detection,
Rate Meter, Nuclide ID, Dose Rates and accumulated Dose.
Syclone
The SYCLONE Gamma-Ray spectrometer utilizes the highest quality
Thallium doped Sodium Iodide crystal, combined with an integral high
signal to noise ratio PMT and state-of-the-art electronics and embedded
microcontroller firmware. All of these enhanced features allow the SYCLONE to be one of the most accurate portable Gamma-Ray spectrometers when it comes to identifying specific and/or multiple isotopes even
with weak gamma sources. The mechanical assembly of the SYCLONE
is robust and designed for field applications where harsh environments are commonplace.
The SYCLONE operating system utilizes sensible easy to read and follow Menus. The multi-position
joystick and large LCD backlit display provides easy navigation through menu selections. Detailed
spectral information is clearly and precisely displayed so knowledgeable users have the ability to
visually identify peaks in the histogram. Various on-screen messages assist the user when immediate
attention is required for issues such as preset timing, high radiation levels, alarm settings and warning
messages.
The Radiation Raider is a state-of-the-art handheld instrument in a
class of its own. It uniquely meets or exceeds the performance
requirements of ANSI N42-34
(RID) and ANSI N42-48 (SPRD) standards. The instrument utilizes an innovative
array of solid-state CZT detectors and (optional) He3 tubes to provide superior
gamma and neutron sensitivities resulting in a rapid identification and verification of
radioactive materials.
RIIDEye
The Raider is small enough and light enough to be held and operated with one hand
and can be conveniently clipped to the user’s belt in the holster provided. Easy to use,
it is both water and drop resistant, making it rugged and ideal for strenuous operating
situations.
Training is easy allowing for swift and expeditious
deployment of the RIIDEye by virtually anyone regardless of their level of experience or background in radiation detection and monitoring. The unique and advanced features of the RIIDEye can be quickly mastered to ensure fast, accurate measurements
and reliable results. Immediate identifications are already displayed as color coded energy
peaks in real time - while taking a spectrum – resulting in significant time savings in many critical
situations.
All spectra are archived and stored with a time and date stamp on a convenient compact flash
disc. data management on a PC.
Radiation Raider
The Raider records, displays, and analyzes spectral information in real time, providing quick and accurate radionuclide identification. This is made possible through state of the art micro-miniature electronics utilizing modern
digital signal processing. A built-in GPS identifies the global position of the instrument and transmits this and other
pertinent event information, including the spectra, identification results, picture and audio description of the incident, via its reach-back capability using Bluetooth© and/or WiFi communication channels.
Isotope Identification
The RIIDEye from Thermo Scientific is an easy to use
and very advanced handheld isotopic identifier. It
provides precise, real time gamma source identification
using the patented QCCtechnology. Effortless and
uninterrupted operation is made possible due to a design
that is ergonomic with the weight of the unit perfectly
balanced at the mid point of the handle.
Contact Us for GSA and Quantity Pricing
17
GR-135
The GR-135 Plus uses a variety of sophisticated techniques to accurately detect and identify nuclides, including a 1,024-channel highresolution analyzer; stabilized, thermally corrected gain; and pulse pileup rejection to reduce errors at high count rates. Users can define
energy ranges to search for specific nuclides. The unit includes four
predefined nuclide libraries, and SAIC can provide custom libraries for
specific applications.
The unit is easy to carry and use in one hand using the thumb joystick.
Typical operations are simple and automatic. The large, backlit LCD
display features auto-scaling and zoom for graphs, and can display
text in many languages. Audio feedback lets users search without
watching the unit. Advanced users can customize alarm levels and other parameters for specific
applications.
SpiR-Ident Mobile System
SPIR-Ident Mobile System, is a movable radiation monitoring system, developed for vehicle, helicopter
and aircraft use. It is a ruggedized and friendly deployable equipment with the higher existing capability
for both detection and identification of radioactive sources.
This system especially allows to detect artificial gamma isotopes among varying natural isotopes when
used as an airborne or vehicle borne system
FEATURES
for the purpose of contamination evaluation
• Very sensitive nuclear detection and real-time
identification
• For mobile use: car, boat, helicopter or airplane
• Potential radiological threat search with Homeland Security algorithm
• After event contamination mapping
• Versatile configuration 1 to 4 detectors, 2 to 16
liters NaI(Tl)
• Rugged detection case and wireless tablet PC
• GPS and mapping function
The GR-135 Plus can store thousands of time-stamped readings in non-volatile memory. Users can
quickly replay and re-analyze stored readings on the unit. In its docking station, the unit can upload
stored data to standard workstations for more detailed analysis using the powerful IdentiVIEW application, and for transmission and archiving.
The HDS-101G and HDS-101GN are portable devices
designed to search for any radioactive materials and to
respond to incidents involving Radiological Dispersal Devices. They feature the
capability to identify the detected isotope and characterize its category from
medical, industrial, naturally occurring radioactive materials (NORM) and special
nuclear materials (SNM).
HDS-101
SpiR-ID
The SPIR‐ID is a rugged handheld device designed to efficiently search for
radioactive materials and “on the fly” discriminate threats such as illicit trafficking
and Radiological Dispersal Devices (RDDs).
It quickly and reliably identifies and categorizes radionuclide’s for demanding
scenarios including heavily shielded or masked threats due to a large volume
detector associated with the Identpro/SIA algorithm specifically designed for
homeland security.
Because of their high sensitivity, they can be used to verify any alarm trigged by
a fix-installed monitor or by a radiation pager, to locate sources and measures
radiation levels, and even to identify the detected isotope. These products are
ideally suited for first responders, border control, customs inspectors, site security in critical infrastructures, and for all missions related to the control of nuclear
materials.
Algorithm processing-continuous spectra acquisition and stabilization (0.2s time slot), continuous dose
rate and count rate comparison to background, Varying Background Suppression algorithm (VBS)
continuously analyzes the spectra shape and rejects alerts due to sudden background changes,
NORM Medical Discrimination algorithm (NMD) categorizes and identifies up to 4 simultaneous
isotopes. Cumulated spectra can be triggered by alert detection or on request.
Detection and Identification performance exceeds all ANSI N42‐34 requirements. Rugged construction and simple routine user mode are ideally suited for
field use in harsh environments. The SPIR‐ID can be used for mobile surveys
or for portal alarm assessment.
It is ideally suited for military, civil defense, border & customs and generally all applications requiring efficient detection, search and identification of radiological threats.
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Isotope Identification
URSA II
Ideal for laboratory applications! The URSA II, with
a full-featured MCA program, can be used with practically any radiation detector and can extract any data your detector can supply! It has
been designed taking into account comments and requests from our
current URSA customers. URSA-II MCA, the all-new fully, quantitative
Windows™ based URSA-II software package has been designed for
ease of use in a 32-bit Windows™ environment. Software also
includes URSA-II for PPC software to run the URSA-II using a Windows Mobile™ Device (Jornada, iPAQ, TDS Recon, etc.) running
Windows CE™ or Windows Mobile™. The Software can be installed on as many computers
as you like, with no restrictions and includes free software
updates.
NUC-ID Kit
Featuring
the URSA II
SOFTWARE INCLUDES:
• Fully editable standard libraries include all 497 isotopes listed
in "Kocher's Radioactive Decay Tables."
• Multi-channel scaling mode, peak search and identify, quantification based on ROIs or
peaks search.
• Dual-channel emulator allows use with gas proportional or phoswich detectors as a "gross
alpha/beta" counter/scaler.
• Sophisticated multiple alarm functions are based on the overall count rate, individual ROIs,
exceeding a specific rate or an increase in rate over a specific time interval. Alarms can
trigger external devices.
• Power Requirements External 12VDC power supply, six "AA" NiMH rechargeable batteries
(included) with recharging internally, or six standard alkaline "AA" batteries. External 12VDC
power jack allows instrument to plug into vehicle. "Fast Charge" of NiMH batteries can also
be selected. The URSA-II is fully portable with four hours of battery life and PPC Compatibility
• Weight 391 grams (13.8 oz.) without batteries.
• Size 157 x 90 x 44 mm (6.186 x 3.558 x 1.718 in.)
• Minimum System Requirements 486 computer running Windows 95® or higher. Connec
Detector Connector Two detector inputs. One standard series "C" connector for detectors
where the signal is joined with the high voltage supply. The other is for detectors having
separate connections for high voltage (SHV connector) and signal (BNC connector). Active
detector input is selected via software, and can be negative, positive, or pre-shaped
(positive) signal.
18
These sources are supplied as one inch plastic discs.
With the exception of the alpha source, the small quantity of radioactive material is sealed in the plastic with epoxy to prevent leakage and contamination. The transmission
window is sufficiently thin to transmit both beta and gamma emissions without undue absorption. The alpha source
is of open window construction with the source material bonded to the surface of a silver foil mounted in the recess of
the plastic disc. This design yields excellent emission of alpha particles without window losses. Many sources are
and of nominal activity to provide a safe, yet inexpensive supply of radioactive material for educational and commercial use. Calibrated sources are also available, please call for more options.
Disc Sources and Kits
RSS-2—GM Resolving Time Set; This set is used for determining the resolving time of GM
Counters. It consists of three half discs, two of which contain 5 uCi of Tl-204 plus a third half disc
with no activity. The count-rate of each half disc plus the blank (to maintain constant geometry) is
measured and then both active half discs are combined for a measurement with high count-rate.
RSS-3—The RSS-3 contains 1 each Po-210, Sr-90 and Co-60 emitting a range of alpha, beta
and gamma radiation's. This set is ideal for demonstration and introductory nuclear labs covering
basic characteristics of radiation.
RSS-5—Containing 1 each Cs-137, Co-60, Sr-90, Tl-204 and Po-210, the RSS-5 provides a
wide of alpha, beta and gamma emissions making it a popular choice for nuclear science instruction
The set contains two beta emitters, two beta/gamma emitters and one alpha source for in-depth
studies of radiation.
RSS-8—Designed for gamma spectroscopy, the RSS-8 contains eight different gamma
emitting isotopes covering the entire energy range from 32 to 1333 keV. Also included in the set is
a mixed source of Cs-137 and Zn-65 which students may use to identify an “unknown” isotope.
The set consists of Ba-133, Cd-109, Co-57, Co-60, Cs-137, Mn-54. Na-22 and Cs/Zn.
RSS-8 EOD—Uniquely configured for EOD and DNDO applications. The RSS-8 EOD
variations contain consists of 1uCi Ba-133, Co-57, Mn-54, Cd-109; 0.5uCi Cs-137, Na-22 and Co60; 0.1uCi Cs-137; PRND Training Kit: Includes-1 of each of the following-1 uCi each-Ba133EU152-Cs137-Na22-Mn54-Co57-Co60-Cd109
Cs-137—Cs-137 sources available in activities up to 10 micro curies
Isotope
Ph (410)Identification
465-5558 | Fax (410) 465-5257 | [email protected]
Contact Us for GSAIsotope
and Quantity
Pricing
Identification
19
AM-801
The TPM-903B is designed for rapid screening of personnel in the event of a
TPM-903B radiation release. It provides early warning of hot spots, eg. on protective
clothing, and has design features suited for monitoring radiation workers,
vehicles or the public. The TPM-903B is lightweight and mobile to facilitate
transport to its location, where it is easily installed within seconds. In use, the
aperture accommodates walkers or wheelchairs, and can be adjusted to also
accommodate vehicles. Users are first detected by the occupancy sensor
which switches the detectors from updating the background into scan mode.
The alarm is given if the counts exceed a predetermined level, if not, the
green “ready/clear” light remains on. The passage time is typically 1 second
and a Reliably Detected Activity (RDA) figure of1 μCi in a 25 uR/h background.
The AM-801 Portable Portal monitor assembles simply in less than five minutes. It comes
with Voice Operational Commands, Full Color
Touch Sensitive graphics panel, and Auto Cal
for Maximum Sensitivity. The audible and
visual alarms meet or exceed FEMA's sensitivity requirements of 1uCi or less Cs-137
detection.
With preset parameters, self-testing is complete in 2 seconds and background is acquired in 20 seconds. The TPM-903B is then operational. If
parameters need adjustment, the LCD display prompts the operator for setup
values which are entered via the password protected keypad. Alarm level,
time and date, signal amplitude discrimination level, resetting of occupancy
sensor and detector variance test are all adjustable.
The AM-801 is the only portable walk-through monitor with voice
commands, making the monitoring and decontamination process
much easier for the technician and the public. This also the only
device of this type to boast a full 36” (91 cm) interior pass-through
width to accommodate wheelchairs and stretchers.
It boast a full color touch sensitive graphics readout making it easy
to set up and operate. It features auto calibration (for maximum
sensitivity), audible and visual alarms, diagnostics, 120 vac w/10hr
battery backup. The AM-801 is also available with optional printer
and VH-1 Vehicle Monitor Kit.
Hard sided
shipping case
included!
Intuitive, easy
to read touch
screen display.
FEATURES
• Fast walk-thru operation
• Easily adapted to a vehicle monitor
• Detects shielded sources
• OK for wheelchair and stroller use
• Features New to the TPM-903B
• Networkable
• Backlit display
• Brighter lamps
• Louder alarm
• Controller can be remotely operated
Vehicle Conversion Kit
To set up, simply clamp the pillars to floor stands with
the provided thumbnuts, make simple connections,
slide the crossbar into push fit, connect the unit to AC
power or D-cell batteries and switch it on. With
preset parameters, self-testing is complete in 2
seconds and background is acquired in 20 seconds.
The TPM-903B is then operational. If parameters
need adjustment, the LCD display prompts the
operator for setup values which are entered via the
password protected keypad. Alarm level, time and
date, and signal amplitude discrimination level are all
adjustable.
The TPM-903B is supplied in a ski-style bag containing just five main pieces: two support stands, two
vertical pillars and the cross bar which holds the
controller. With a total weight of only 90 lbs (approx.)
it can easily be wheeled into place.
The TPM-903B operates equally well from AC power
or six alkaline D-cells which provide over many hours
uninterrupted use.
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Radiation Monitors
20
Rad-DX
The Rad-DX operates on the new and exclusive D-tect SensorNet - an
automatic communication network that allows users to monitor a full
network of Rad-DXs as long as they are in range of a single Rad-DX
system (up to 1000 meters)! The Rad-DX units will automatically form an
intelligent, self-healing mesh network, allowing them to be constantly
connected to each other as well as to the user network.
Each Rad-DX can be controlled and monitored by a PC on the network or
cross the internet on any Tablet or remote PC. 128-bit encryption protected. Monitoring can be real-time or past event logs can be reviewed.
Monitor all the Rad-DXs on a floor plan, within a facility or on wide area map. The display provides an
intuitive understanding of the location of the devices and can track the motion of a radioactive source.
Dose rates can be viewed in multiple graph formats.
The Rad-DX is ideal for security and infrastructure protection applications – waste management –
hospitals – industry – or any location where accurate, versatile and economical radiation monitoring is
needed.
Rad-D Portal Monitor
Fixed or Portable; At 17” Length and 5” around, the Rad-D is a
versatile and highly sensitive radiation detector that can be integrated
into an existing security system and be used to monitor: Points of
entry; conveyor belts; on X-ray machines; or metal detectors.
Other devices need large, fixed areas and concrete footings to mount their systems and require traffic
(vehicles or people) to be forced through a fixed inspection corridor. Due to it’s small footprint, the flow of
vehicles or pedestrians is not affected. A Rad-D system can include up to 4 detectors operating simultaneously. The Rad-D is designed to integrate into existing networks, using serial communications or Bluetooth.
Two types of Rad-D detectors are available; Gamma, or Neutron. The standard unit searches for gamma and
X-ray radiation and can be configured with or without collimated lead shielding The neutron detector is an
important tool to detect the transport of illicit nuclear weapons. The Rad-D is designed to be extremely easy
to use. It provides the operator with a single digit read out of a “1” to a “9” to show the strength of the detected radiation. The Rad-D also shows the actual count of photons or neutrons and automatically calibrates
itself to the natural background.
SPECIFICATIONS
Function:
Detector:
FEATURES
• D-tect SensorNet™ (mesh network) equipped – automatic
connections between all Rad-DXs
• Integrates with your local network integration via encrypted
WiFi or Ethernet
• Control and monitor on Tablet or PC
• Integrated floor plan design shows the radiation source
• Mounts on standard electrical junction box
• Blends into public areas - small, lightweight, and discreet
• IP65 rated (sealed against dust and rain)
• Radiation detection in less than 1 second
• Sensitive Dose Rate and Total Dose measurement and
recording
• Directionality detection available
Radiation Monitors
Dual Versions Available
Gamma, Gamma/Neutron detection
Sodium Iodide doped with Thallium Scintillator
With Optional PRM
(Gamma) He3 ((Neutron)
Power:
Regular 120VAC
System
Response: < 1 second
Notification: Audio alarm, LED with readout 1—9 (9= highest)
Calibration: Automatic
Calibration
Biasing: 16-position switch; allows manual setting
Placement: Can be mounted on walls, vehicles,
machinery, x-ray machines and
conveyer belt systems
The Rad-D becomes fully transportable with
Size:
Detector: 5" Dia, 17.5" length
the exclusive LAURUS Systems PRM Bracket
Control Unit: 6.75" x 4.2" 3"
Mounting System, making SNM detection of
Weight:
Detector: 27.5 lb;
containers, conveyor belt package inspection,
Control Unit: 1.5 lb
ad-hoc vehicle monitoring, and special event
Environment: Any normal temperature controlled
surveillance even easier.
environment
Rad-D
Contact Us for GSA and Quantity Pricing
21
Mini Rad-V
Recognizing elevated radiation levels and detecting radioactive
materials has never been easier. The ultra sensitive Mini Rad-V
vehicle mounted radiation detector takes the proven performance and reliability of the Mini Rad-D
and Rad-D technology to new levels for first responders and those concerned with discovering
unwanted radioactive materials.
The Mini Rad-V will give the occupants of the vehicle an instantaneous alarm (< 1 second) when the
radiological conditions minimally exceed normal background levels. Although the Mini Rad-V constantly calculates and updates the background conditions, the end-user does have the option of
manually adjusting for higher than usual radiation environments.
Whether you are concerned with dirty bomb components, industrial accidents, or unknowingly adding
radioactive materials to your normal payload, the Mini Rad-V will economically enable you to reduce
your risks. Because it is permanently installed in the vehicle, if there is power from the battery, the
Mini Rad-V is on the job
Ultra Sensitive Vehicle Mounted Rad Monitor
SPECIFICATIONS
• Mission: Vehicle mounted radiation detection system
• Detector: 1.3 cm diam x 3.8 cm Cesium Iodide Scintillation detector with high-sensitivity
photo- multiplier tube
• Calibration: Automatic
• Sensitivity: Alarms at 55µrem/hr (~63 µR/hr)
• Response Time: Less than 1 second
• Display: Large LED indicators for in-cab viewing
• Alarm Indicator: Loud audible alarm with acknowledge button
• Environment: -10°F to 122°F (-23°C to 50°C). Operates in high RF and other harsh
environments.
• External Sensor Housing: Sealed waterproof and shock isolated enclosure
• External Sensor Dimensions: 6.2” x 3.6” x 2.4” (with mounting hardware)
• External Sensor Weight: 1.25 lb
• Warranty: 1 year parts and labor
The RC2W34 Waste Radiation Detection
System is a precise and innovative instrument specifically designed to detect radioactive material in a moving
vehicle containing waste and scrap. The revolutionary design of the
RC2W34 incorporates 20 years of engineering design and proven field
application experience.
RC2W34-2
The RC2W34 incorporates state-of-the-art components and software.
The end-user will have a clear understanding of the RC2W34 operations
without a background in computer science or physics. The RC2W34 uses
“rate-meter” concepts so that once the operational parameters have been established the system
will provide automated scanning without operator interaction. The RC2W34 WASTE simply
collects data on continuous bases from each detector assembly in the system and automatically
sets up alarm thresholds according to the set parameters. In the event radiation has been detected in vehicle a varying audio frequency and change count-rate on the display will warn the
operator of the detection. To ensure the operator hears and sees the alarm condition the audio
and red alarm lamp will remain on until the operator resets the systems condition.
PM702
The TSA PM702 personnel portal monitor was designed for
monitoring applications that require less sensitivity or for
situations that require a semi-portable monitor. While it has adequate sensitivity for security applications, it is primarily designed for use in hospitals, laboratories, and other locations where radioactive Special Nuclear Materials (SNM)
need to be monitored.
The TSA PM702 portal monitor is a highly reliable system for the radiometric
protection of special nuclear material (SNM). It exceeds the criteria for an
ASTM Standard C 1169 Category II* SNM monitor which will detect 10 grams
of 235U (HEU) on a walk-through basis when using the stop feature.
The TSA PM702 is suitable for indoor or outdoor installation. The system
consists of three main components; two vertical pillars each containing an
organic plastic scintillator detector, and a crossover pillar. An optional step
through feature provides optimal SNM monitoring.
A numeric keypad alarm with an LCD display attaches to the pillar and provides both audible and
visual alarm indicators. The system operates from an internal battery. Under normal conditions the
memory should be adequate to store data for at least 3 months of operation.
The TSA PM702 is compatible with TSA RAVEN™ communications software designed to both
capture and view data and video images relating to a radiological detection incident.
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Radiation Monitors
The DRM-1 is a compact area radiation
monitoring system offering unparalleled
features for stand-alone or wireless area monitoring. The DRM is a portable or fixed position device
for monitoring of perimeters or boundaries and quickly identify changing radiological conditions.
With enhanced sensitivity, the DRM-1D is ideal for radiological monitoring in medical facility emergency rooms, incident site decontamination tents, etc. The optional Display Unit allows the user to
monitor the device from a remote location with visual and audible alarms.
DRM-Area Monitors
22
DRM-1
DRM-2
Optional
Display Unit
The versatility of the DRM provides for easy deployment on emergency response vehicles. The
DRM can be configured for wireless (FHSS) transmission of radiological data or other communication
process (air card, satellite, GPS, etc) It can be deployed and configured as a wireless radiological
monitoring system in arenas, stadiums, convention centers, transportation hubs, etc.
The DRM-2 works essentially the same as the DRM-1. The difference being, it is an all-in-one area
radiation monitoring system with display and alarm indicators in the same device. The DRM-2 offers
unparalleled features for a stand-alone, TCP/IP networked (optional) or wireless area monitoring
solutions.
Solar Powered
Enclosure
NEMA 4 Rated
Enclosure
Network Card
& AC Power
SPECIFICATIONS
Detector:
GM Tube ZP-1301 (or equivalent) High Range
GM Tube ZP-1201 (or equivalent) Low Range
Optional GM Tube ZP-1300 non-energy compensated
Optional CsI detector
Measurement Range:
0.05 mr/hr to 1000 R/hr (0.5 mSv/hr to 10 Sv/hr)
Automatic switching between detectors at 800 mr/hr and 600 mr/hr
Accuracy:
+ 10% of reading, within the measurement range
Energy Response (137Cs): + 20% at 70 keV to 2 MeV
Sensitivity (137Cs):
17 cps/mr/hr (Low Range)
0.3cps/mr/hr (High Range)
Optional CsI (TI) detector: CsI (TI) (30x30mm) crystal optically coupled to PMT with 0.5 mm
aluminum housing and solid Mu Metal shied
Measuring range:
1 µR/h to 9999 µR/h (0.001 mR/h to 9.999 mR/h)
Overflow alarm for reading > 9999 µR/h
Overload for field > 1 R/h
Sensitivity:
6.8 cps/µR/h for 137-Cs
Dimension (DRM 1)
(LxDxW): 7’’x3.5’’x4.25’’ (17.78 x 8.89 x 10.80 cm)
Dimension (DRM 2)
4.8”W x 8.4”L x 4.2”H (212 mm x 123 mm x 107 mm)
Humidity Range:
10% to 95% RH (non-condensing)
Radiation Monitors
DRM-1 or 1D
Strobe Light, Transmitter
Teleview 2000
DRM Non-Metallic
Enclosures
TeleView 2000 is a software program designed for real-time monitoring
of radiation detection devices -providing the user timely display of dose
and dose rate information from a variety of monitoring devices.
FEATURES
• Software suite consisting of TeleCast, TeleView Client and TeleLog
• Single Station or Network Operation
• Display of real-time data captured from electronic dosimeters, portable
survey instruments and continuous air monitors
• Real-time connectivity to Dose of Record/access Control
• System-Capable of monitoring-up to 1000 transmitting electronic dosimeters-up to 256 continuous air
monitors-up to 256 area monitors-unlimited client stations
Contact Us for GSA and Quantity Pricing
The STRIDE Series 300 stanchion detection
units have been designed primarily for pedestrian security installations. The stanchion detection unit looks and works
exactly the same as a standard crowd control stanchion. It has an extendable
belt on top, the post and a weighted base. These units are available in wired
or wireless versions. If wired, the stanchion will have an attached RJ-45
Ethernet cable for connection to a PoE LAN receptacle. Wireless systems
will be completely covert to passengers or pedestrians. The stanchion base,
weighted with lead for stability, will be replaced with a battery weighted base
(batteries provided) with only a connector for an external battery charger to indicate any difference from a
standard security stanchion.
Stride 300
A STRIDE stanchionSPEC consists of a stanchion detection unit with
STRIDE Basic Communications software plus STRIDE Id, (nuclide identification) and STRIDE View (graphic user interface) software programs.
Covert Installation - Pedestrian or Vehicle Monitoring!
The STRIDE Series 800 portal detection units are designed for
pedestrian portal security installations that require very high
sensitivities to all types of radionuclides. Portal detection units are
able to detect and identify radionuclides carried by a pedestrian
walking at a pace of 1 meter per second. It contains two 2”x 4”x
16” NaI scintillation detectors, summed to provide an extremely
high sensitivity to gamma radiation and rapid identification of the
radionuclide. The portal detection unit comes in an aluminum
housing with wooden top and base. Audible and visible annunciators alert attendants of the presence of gamma and, optional,
neutron radiation. The portal detection unit operates on main
power and includes a UPS to assure continuous operation in
extreme conditions. Communication with the server computer is accomplished via an RJ-45
Ethernet connection. An optional He3 neutron detector with moderator is available, as well as a
high dose rate GM detector.
Stride 800
All portal detection units are provided with STRIDE Basic, a server communication and alarm
protocol program. STRIDE ID server software is available for nuclide
identification using an ICx priority template matching technique and STRIDE View, a graphic users
interface client program is available to display alarms and results on the screen of a computer.
STRIDE View also has the ability to transmit messages and/or screens to another computer, PDA
or similar device worn by a local security officer.
23
The VM-250AG vehicle portal monitor consists of two selfcontained, weather resistant pillars placed on either side of the
roadway to be protected. Each pillar contains two organic plastic scintillator detectors, an occupancy detector, and an amplifier/controller. The master pillar also has a
battery, power supply/battery charger, and an SC-770 system controller. The VM250AGN adds neutron detection capability to the basic VM-250AG. Both are
equipped with RS-232 and Ethernet communications capability. The VM-375AG
system (not shown) is essentially a VM-250AG with a third pillar positioned horizontally between the two upright pillars. The third pillar can be mounted above or below
the other pillars. The VM-375A provides improved sensitivity over the VM-250AG.
When the infra-red detector senses occupancy, the system starts comparing
the current count to the most recent background data. Alarm comparisons are
made every 200ms. If the count exceeds the alarm level, both audible and
visual alarms will be triggered. The system monitors itself and indicates low and
high background conditions. A closed circuit tamper output is available for
connection to the AM-270 or on site security system. System status is continuously updated on the system controller SC-770, located in the master pillar.
VM250 AG
VM250 AGN
Sensitivity:
• Gamma: Will detect 1000 grams of 235U (HEU) or 10 grams of Pu, 0.50 probability of detection 95%
confidence in a 20 uR/hr background at a passage speed of 5 mph (8km/h) when tested in accordance with
ASTM International Standard C1169
• Neutron: Will detect less than 200 grams of plutonium in a shielded container that reduces the gamma flux
to 1% of the unshielded gamma flux
Detectors:
• VM-250: Two, 6" x 30" x 1.5" (15 x 76 x 3.8cm) organic plastic scintillator detectors per pillar; provides
approximately 1,080 in3 (17.6l) of detector volume per pillar
• VM-250AGN: Two, 6" x 30" x 1.5" (15 x 76 x 3.8cm) organic plastic scintillator detectors per pillars and four
2.0" x 36" (3 x 100 cm) 3He tubes per pillar; provides approximately 1,080 in3 (17.6l) of detector volume per
pillar
System controller model SC-770 is a general purpose controller which is
used in the master pillar of most TSA portal monitors. A four line,
sixteen character LCD display is used to monitor system status and setup information.
Setup is accomplished using the twelve key keypad on the front of the unit or using the
Windows™ based program included with the unit. All of the settings and system status are
stored in flash memory internal to the unit. The status information can be downloaded using
the Windows™ based program.
SC770
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Radiation Monitors
24
RC Monitor Series
Prevent costly radioactive contamination of your scrap yard, equipment,
plant, product and personnel with the RC4000 vehicle radiation detection
system. The state-of-the-art design of the RC4000 incorporates 14 years of
engineering and field application experience, and has provided the metals
industry with the highest safety record to-date.
The RC4000 Series of radiation detection systems have been specifically designed to detect radioactive
materials contained in a moving vehicle loaded with scrap material. The system design is modular,
flexible and customizable, offering multiple detector configurations to meet site specific applications. The
RC4000 incorporates only the highest quality of components and software/hardware technology available
today.
The system menus are based on a Windows environment allowing a clear and precise understanding of
the RC4000 operations without the requirement of having a background in physics. The software is
extremely flexible, with touch-screen navigation that allows the user to configure general operations such
as; setting passwords, adjusting detector parameters, pinpointing the location of a radioactive source
when detected in a vehicle, storing and the retrieval of all vehicle information.
PRIMARY PROTECTION
• Detectors must be the right size, not too small
• Detector surface area must be as close as possible to the surface area of the vehicle being
scanned
• Detectors face to face spacing must be as close as possible
• WATERSIDE – best possible detection capability with grapple detectors
SECONDARY PROTECTION
•
•
•
•
Unloading rail cars – detectors on the grapple/magnet
Loading conveyors/shredders – grapple/magnet/side walls/overhead detectors
Loading charge buckets - “In-Air” detectors
Dust or Off-gas systems = Multiple detectors
The RC4000 can be controlled and monitored from virtually anywhere in the world, in real-time. Supervisory administration has full control of system access with password control features. The system is both
network and intranet ready, with secured digital wireless and/or highspeed telephone network capabilities. All scans are stored in both graphic
and text modes with full data-logging and central alarm storage viewing
capabilities.
4138 Rail Scale Monitor
Radcomm engineers have developed proprietary technology that not only
tracks the pulse count rates from the PVT scintillator but applies a special
characterization analysis on each pulse. The key benefit of this
“characterization” is the knowledge that specific isotopes will produce
predictable results.
Characterization is used to eliminate any major fluctuations caused by varying densities in loads of scrap
metal, along with any atmospheric changes that might affect a reading. This technique is similar to what is
utilized in gamma ray spectroscopy where a sodium iodide scintillator is used. Characterization is a signal
processing technique that focuses on real-time system noise cancellation, correction of ambient back-
Scrap and Steel
4069 for Truck Scales
State of the art software allows for
full networkability, global control and
reach back, the most sophisticated
algorithms in the industry
Exclusive RC 4110
Replacement System
Contact Us for GSA and Quantity Pricing
CRICKET Grapple System
The exclusive CRICKET radiation detection system fits any grapple, in any
application. It has been designed specifically to meet the needs of the scrap,
steel and waste industries. The CRICKET’s revolutionary, yet simple design
provides an optimum level of detection capability for low intensity radioactive
sources, on a continuous basis, in applications where radiation detection
systems have never existed before. The level of detection capability will far
exceed any conventional radiation detection system, including detection systems that are mounted on the boom of a crane, regardless of the detector size.
Get closer, scan longer. Mounting the CRICKET in the grapple allows direct exposure to all the material
being handled. There are three different opportunities to measure all scrap material during the handling
process. Because the system scans on a continuous basis, material is scanned on the surface before the
grab even picks up the load.
Secondly, the grapple load is scanned for up to 10 seconds while in the grapple. Finally, the material is
scanned as it falls from the grapple. These three scanning conditions allow the CRICKET to provide a high
degree of detection capability for low level radioactive material. In addition, the CRICKET’s robust design
provides greater impact-resistance then any manufactured grapple.
CRICKET Magnet System
Find radioactive sources that other radiation detection systems
miss! CRICKET is the world’s leading, most rugged, highly
sensitive radiation detection magnet mounted system on the
market! The CRICKET radiation detection system is designed
specifically to meet the needs of the scrap, steel, and waste
industries. The CRICKET’s revolutionary, yet simple design
provides an optimum level of detection capability for low
intensity radioactive sources, on a continuous basis, in applications where radiation detection systems never existed before.
The level of detection capability will far exceed any conventional radiation detection system, including detection systems
that are mounted on the boom of a crane, regardless of detector size.
Get closer, scan longer, with more accuracy. Mounting the CRICKET in a magnet application allows direct
exposure to all the material being handled. There are two different opportunities to analyze all the scrap
material during the handling process. Firstly, the CRICKET system can scan on a manual basis, material
may be scanned on the surface before the load is even picked up. Secondly, once the magnet is energized
the load is scanned while in the magnet allowing for the highest level of sensitivity.
25
The RC2 portable radiation detector
has been designed to detect very
low radiation intensity levels from radioactive materials buried in scrap
metal. The RC2 is an extremely effective handheld detector that utilizes a
large 32 cu. in. (0.54L) internal PVT plastic scintillation detector, a common material found in most larger vehicle monitoring systems.
RC-2 Handheld Detector
Operation of the RC2 is fully automatic and designed to allow fast and
easy inspection of areas, containers or vehicles that may contain radioactive materials, or to verify or separate radioactive materials that have
triggered an alarm on large scale radiation detection systems. The RC2
contains a state-of-the-art microprocessor and internal electric circuitry
designed to automatically set the lowest achievable alarm level and to continuously monitor system
operation in order to maintain consistent optimum performance.
In the event that radiation is detected, a varying audio tone will activate to help locate the source of
the radiation. In addition, the display will show an increasing count/second (cps) numeric radiation
level. The RC2 is equipped with an internal rechargeable battery pack that eliminates the need for
stocking and changing conventional batteries. There are also three warning condition indicators for
«Low Battery», «Change Batteries Now », and «Over Range», when the measured radiation exceeds the dynamic range (saturation) of the system.
RC-22/23 Wand
Pinpoint a radioactive source quickly and safely with a RC22 or RC23 Wand.
• Fully automatic and easy to use
• Light weight
• Extendible for longer reach
• Easy to read backlit display
• Quick response time with variable alarm tone
• Fully Automatic and Operator Friendly
The RC22 and RC23 were designed to allow fast and easy inspection of areas, containers or vehicles
that may contain radioactive material. Upon start up the unit will perform a background check and
automatically set an alarm threshold for the user. In only seconds the RC22 and RC23 is ready for
use.
Easy to Read Display with Audible Alarm—When radiation is detected the display will immediately
show the increasing radiation levels. An audio alarm will also be activated to help locate the exact
source of the radiation. The tone varies based upon the proximity and intensity of the radioactive
source.
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Scrap and Steel
RC 1069 Manually Operated System
26
The RC1069 is a dual detector configuration that is mounted at vehicle weigh scales.
The RC1069 is extremely flexible when it comes to detector configurations. The line
of detector sizes can be made to fit virtually any application whether it be a feeder
yard large or small vehicle scales to a conveyor in feed/downstream to a small nonferrous sorting area.
In order to provide reliable and rugged state-of-the-art detectors suitable for any
hostile environment, Radcomm uses nothing but lab-quality components, such as
premium grade PVT and components using low noise design technology.
“Bare Bones”
Radiation Detection System
SYCLONE Gamma Spectrometer
The SYCLONE Gamma-Ray spectrometer utilizes the highest quality Thallium doped
Sodium Iodide crystal, combined with an integral high signal to noise ratio PMT and
state-of-the-art electronics and embedded microcontroller firmware. All of these enhanced features allow the SYCLONE to be one of the most accurate portable GammaRay spectrometers when it comes to identifying specific and/or multiple isotopes even
with weak gamma sources. The mechanical assembly of the SYCLONE is robust and
designed for field applications where harsh environments are commonplace.
Simplified and Flexible - The SYCLONE operating system utilizes sensible easy to read and follow Menus. The
multi-position joystick and large LCD backlit display provides easy navigation through menu selections. Detailed spectral information is clearly and precisely displayed so that even users without special nuclear training
can easily see scan results. Various on-screen messages assist the user when immediate attention is required
for issues such as preset timing, high radiation levels, alarm settings and warning messages.
Remote SYCLONE PC Spectral Analysis and Data Storage Software- The SYCLONE is equipped with a large
internal memory that allows large amounts of data to be stored by record number, date and time. Stored data
such as spectral and dose rate information can be easily downloaded to a PC via a serial RS232, mini USB or
Bluetooth. The SYCLONE PC software has all the necessary features that will meet the needs of virtually any
user.
Scrap and Steel
MEDSpec
The MedSpec portable Fast Responding Gamma Spectrometer and
Dose Rate Meter will instantly measure any material for the presence of radioactivity whether it is general waste, medical waste,
scrap metal or recycled material. Operation of the MedSpec is
completely automatic once the easy-to-set operational parameters
have been selected. Simply position the unit in close proximity to the
object that needs to be scanned and listen for the varying audio
alarm to sound and/or the displayed readings to increase. The
MedSpec scans suspect material and quickly analyses to determine
if and what radio-isotope is present then further categorizes the
result as Medical, Industrial, or Natural Occurring Radioactive
Material (NORM).
The user selectable readout on the instrument display will show the
desired units of measure such as Counts per Second (CPS), DoseRate (Sv/h, R/h) or Accumulated Dose (Sv/R). The MedSpec stores all results in a record
which can be downloaded via USB into the user-friendly RadCom MedSpec software for information archiving and further data manipulation and analysis. Reports can be saved in Adobe®
PDF format and emailed via user’s PC. Remote service diagnostics and software updates of the
MedSpec are also achieved by utilizing the RadComm software.
mini Rad-D
The mini Rad-D is a highly portable, rugged, all-weather radiation
detector that’s small enough to wear on a belt yet powerful enough
to quickly locate low-level radioactive sources, even in a container
of material. Designed to discreetly monitor in any environment with
very little training required, the mini Rad-D can be set to notify the
user by vibration or audible alarm whenever gamma radiation
exceeds natural background levels. The mini’s simple operation
and highly readable display provide an automatically updated
strength indicator in under 1 second, allowing a rapid area sweep
to identify the exact location of any radiation source.
The mini automatically calibrates itself to the natural background radiation, maximizing its
detection sensitivity in any environment. What happens when the mini detects radiation? It will
alarm or vibrate, depending which mode it is in and display a simple intensity number of a “1”
to a “9” on a large, bright, easy to read LED display.
Contact Us for GSA and Quantity Pricing
27
H-809-V
AVS-28A
The Model H-809V is a lightweight rugged grab sampler
designed specifically for heavy duty industrial applications
sampling airborne particulates or combination particulates
and radioiodine. The Model H-809V may be used with
RADCO sample holders that house selected filter discs and
high quality RADCO radioiodine cartridges. The unit may
be re-calibrated using one of the RADCO NIST traceable Air
Flow Calibrators (sold separately) to give the user a fully
qualified air sampling system. The H-809VI has a small, sintered metal exhaust diffuser and is
normally used with combination filter and cartridge holders (typical flow range from 1-8 CFM). The
H-809VII has a large diffuser and is normally used with 4” diameter filter holders (typical flow range
from 1-30 CFM). Standard features of the H-809 series include a spring-loaded face guard which
protects the switch, fuse, and flow adjust knob and a top mounted eye bolt with carrying strap.
The Model AVS-28A Portable Constant Flow Air Sampler is a
continuous duty, constant flow device. It can be used with filters
and cartridges in the collection of airborne contaminates, or as a
regulated, positive displacement vacuum supply for continuous
air monitors and stack sampling systems.
The ability of the AVS-28A to maintain a preset sample flow rate
is controlled by the unique side-mounted regulator valve. The
RADēCO regulator valve is not a bypass design, and therefore
the exhaust contains only sampled air. The AVS-28A has the
superior ability to compensate for added P across sampling media. The sampling flow rate is read out on a
side-mounted rotometer which measures the differential pressure across the in-line anodized aluminum
venturi. All units are individually calibrated and traceable to NIST.
SPECIFICATIONS
SPECIFICATIONS
Dimensions:
Weight:
Power Requirement:
Power Cable:
Air Flow Indicator:
Air Mover:
Motor:
H-809-C
8” High X 10” Wide X 7” Deep, 30.3 cm X 25.4 cm X 17.8 cm
10.5 lbs (4.8 kg)
115V, 50-60Hz, 8 Amps, 1ø, 230V, 50-60Hz, 4 Amps, 1ø
Three wire cord six feet 10 Amp rating; UL and CSA approved.
British and European available.
Individually calibrated, easy reading protected rotometer.
Two stage turbine blower with peripheral exhaust.
One horsepower; self-cooling universal
Air Flow Rate:
Air Flow Regulation:
Dimensions/Weight:
Power:
Air Flow Indicator:
Air Mover/Motor:
26”
Input Connection:
Re-settable Time Meter:
Adjustable from 0.5 to 3.5 CFM (15 to 100 LPM).
+5% of set air flow rate up to maximum capability of pump.
12” Long x 14” Wide 9” High, (30.5 cm x 35.6 cm x 22.9 cm), 38 lbs (17.27 kg).
115V, 60Hz, 4.6 Amps; 230V, 50hz, 2.3 Amps. Three wire, (6) six feet (10) Ten
Amp rating; British and European available.
Venturi mounted rotometer.
Self-adjusting carbon vane type. Pump is designed for continuous operation at
Hg vacuum. Rated at 1/4 horsepower with thermal overload protection.
3/8” Female Quick Disconnect.
99999 hours and 59 minutes, pushbutton re-settable.
The Model H-809C is a lightweight GRAB sampler designed for sampling airborne particulates or
combination particulates and iodines in the field using a motorized vehicle or RADēCO’s Portable
12/24VDC Power Supply. The H-809C is supplied with a battery jumper type cable with large alligator
clamps for connecting directly to battery terminals. RADēCO precision machined aluminum sample
holders, selected filter discs, and high quality radioiodine cartridges can be used with a RADēCO NIST
traceable air flow calibrator to give the user a fully qualified air sampling system.
SPECIFICATIONS
The flow rate capability of the H-809C is dependent upon the pressure drop across the filter media
used. Five CFM may be obtained through a 4” diameter filter, while two to three CFM is the upper limit
for open face combination filter and charcoal cartridge filter media. High pressure drop filters and
cartridges are not recommended for use with this unit. A number of different sample holders are
available as accessories.
AIR MOVER:
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
SIZE:
WEIGHT:
POWER CABLE:
AIR FLOW INDICATOR:
SAMPLING RATE:
8” High x 10” Wide x 7” Deep
20.3cm x 25.4cm x 17.8cm
11 LBS (5Kg)
12V or 24VDC, 15 Amps
Individually calibrated rotometer; supplied with
rotometer guard.
Two stage turbine blower with peripheral
exhaust
1 to 5 CFM (30 to 140 LPM); Filter media
dependent
Air Samplers
28
Calibrators: C-812, C-828, C-8528;
D-812, D-828, D-8528
H-810
The RADēCO™ Model H-810 is a dependable, lightweight high volume air
sampler which incorporates the reliability of the Model H-809V with an Air
Volume Totalizer. This microprocessor based unit is designed to eliminate the
use of rotometers and mechanical time meters, simplifying air sampling procedures while adding significantly higher accuracy to air sampling data.
The Air Volume Totalizer portion of the sampler is composed of an enclosed airturbine which rotates at speeds proportional to the air velocity of the sampled
air. The turbine’s rotation is sensed by a reflective sensor/breaker disk. The microprocessor converts the
signal to volume and displays the flow rate, total volume, and elapsed time on the LCD readout.
RADēCO Air Flow Calibrators are the most
durable and repeatable calibration devices
available. The RADēCO calibrators are constructed of a precision machined aluminum
venturi tube. The C-Series (analog) employs an
appropriately ranged magnehelic gauge while
the D-Series uses an appropriately ranged
intelligent digital meter, both mounted in rugged
steel cases. Simple, cost effective and consistently accurate year after year. RADēCO Air
Flow Calibrators are available calibrated in cubic feet per minute or in liters per minute. Each
calibrator is individually calibrated to an air flow instrumentation system whose calibration is
certified and traceable to the National Institute of Standards and Technology (NIST). The
RADēCO Air Flow Calibrators are guaranteed to an accuracy of better than +5%, referenced
to 29.92 inches of mercury and 70°F. A Certificate of Calibration is supplied with each calibrator.
Typical Max Flow Rates for Various Filter and Cartridge Combinations
CARTRIDGE
CP-100
CP-200
BG-300
GY-130
None
HD-206 1 FILTER 47mm LB-5211 FILTER 0750-36 GELMAN AE FILTER 47mm
DIAMETER
47mm DIAMETER
DIAMETER
FLOW RATE (CFM)
FLOW RATE (CFM)
FLOW RATE (CFM)
4.5
3.3
2.8
8.9
4.9
5.0
7.4
4.7
3.8
4.2
3.1
2.7
11.8
6.0
4.5
The RADēCO Model H-811 AC/DC is a dependable,
lightweight high volume air sampler which can operate off
12 or 24VDC as well as 120 VAC. This microprocessor based high volume air
sampler will operate virtually anywhere. The unit has a slip connector for
powering off a car battery or a RADeCO RAD1224 Battery Pack as well as a
removable AC power cord for when line power is available.
In 2006 we upgraded the microprocessor of the industry favorite H-810 to
allow three independently programmable calibrations as well as altitude
correction factors. This one unit can replace up to 6 air samplers. Three AC
units with different calibrations and three DC units with three different calibrations.
The Air Volume Totalizer portion of the sampler is composed of an enclosed air-turbine which rotates at
speeds proportional to the air velocity of the sampled air. The turbine’s rotation is sensed by a reflective
sensor/breaker disk. The microprocessor converts the signal to volume and displays the flow rate, total
volume, and elapsed time on the LCD readout.
H-811
Air Samplers
RADēCO maintains an Air Flow Calibrator recertification and repair service for all RADēCO
units. Similar units manufactured by competitors can also be serviced at our facility. Special
calibrations are available upon request. An assortment of adaptors is available which mate
the calibrators to all RADēCO Sample Holders.
The operation of the Model H-811 is a very simple, four-step procedure, and the training required by
the user is relatively short. Its operational procedure is:
1. Connect to a power source.
2. Install the sample holder with filter media.
3. Turn power switch on.
4. Press the start key.
FEATURES:
•
•
•
•
•
•
•
•
Constant airflow maintained with ΔP across the filter up to 17" Hg (Flow Rate Dependent)
Balanced, Easy to carry system
Flow rate indicated on rotometer, CFM or LPM
Rated for continuous duty
Low noise level
Minimal maintenance
Optional elapsed time indicator
All units individually calibrated and traceable to NIST
Contact Us for GSA and Quantity Pricing
29
Air Force Kit
Filter Papers- HD-2061 & LB-5211
H-809VII
High Volume Air Sampler
HD-2061 This filter paper combines good aerosol filtration efficiency with
slightly higher porosity than LB-5211 Laminated glass filter paper. These
products are high efficiency multi-purpose filter materials with good heat
resistance. They are particularly recommended for both gas and liquid filtration
in the medical field and for air monitoring applications. The base material
consists of micro glass borosilicate fibers with low amounts of acrylic resin, the
composition of which corresponds to the description listed in DFR Title 21,
Part 177.2260, Filter, Resin Bonded.
In 2003 RADēCO was selected by the United States
Air Force as their supplier of Emergency Response
air sampling equipment. Since then, RADēCO has
provided the USAF with over 500 complete air
sampling kits, composed of calibrators, filter media, sample holders and air samplers. These kits
have been distributed to Air Force bases around the globe and we continue to support and
supply the USAF with quality service and equipment.
USAF Complete Air Sampling Kit - Part No. AS Kit_USAF SC
• H-809VII - High Volume Air Sampler
• 2500-25 (2500-25A) - 4” Diameter Filter Holder
• 0750-49 - Filter Paper, Retention Efficiency 99.99% for
0.3 micron particles
• TRP-2 - Tripod for use with the H-809VII with applicable
adaptor
• Soft Case Air Sampling Kit Model SC-1
Calibration Equipment - Part No. D-8528Kit
• D-8528 - Digital Air Flow Calibrator
• 2500-43 - Calibration Adaptor
• * One adaptor per calibration setup
Air Force Kit Soft Case
Unlike the heavy and cumbersome Pelican Case, the
SC-1 Transport Case was specifically designed for
use with the USAF Air Sampling Kit. The SC-1 allows
responders to store their air sampler attached to the
TRP-2 Tripod, enabling responders to vastly improve
their response time. There are also internal pockets
for storage of the 2500-25A filter holder and 0750-49
filter paper.
210B - Weather House
The RADēCO Model 210B Weather House is a heavy duty, all aluminum
weather house with features especially desirable in a weather protected air
sampling station. The Model 210B not only has two sets of louvers on each of
four sides so that air may enter the weather house from any direction, but each
set of louvers is uniquely counter-louvered to prevent rain or snow from blowing
onto the instrumentation in the weather house. Each end also has upper
louvers to prevent heat build-up under the roof.
To permit ease of installation, an electrical box is firmly mounted inside on one wall in the upper part of the
house. Electrical conduit from the bottom of the house to the electrical box requires only wire installation and
the wiring of the box. A standard light socket is provided so that a “heat lamp” may be installed by the user for
extremely cold weather usage.
Tripod
Model TRP-2
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
The TRP-2 is a survey style Tripod which provides telescoping
legs for varying sampling heights. The feet are rugged steel with
sharp point for a solid gripping on a variety of surfaces.
Constructed of lightweight Aluminum for ease- of portability with a
solid cast aluminum head for years of reliability.
The TRP-2 works with either the H-809 Series or the H-810 series
of High Volume Grab Samplers. When ordering please specify
which unit it will be used so the appropriate adapter plate/block
can be provided.
Constructed of lightweight Aluminum for ease- of portability with a
solid cast aluminum head for years of reliability.
Air Samplers
30
H-29A & 66A
The Model HD-29A and HD-66A are mobile “K-Flow” constant
flow air samplers designed for use in nuclear power plants,
research laboratories, production areas, and throughout industrial facilities where the collection of precise air samples is
required on a continuous or semi-continuous basis. The heavy
duty vacuum pump and constant air flow regulator combination
permits the collection of an air particulate sample at a constant
flow rate until the ΔP across the filter paper exceeds the capability of the pump at that flow rate.
The controlled flow rate is observed on the handle-mounted
rotometer and is adjustable from 1.0 to 7.0 CFM. The HD-66A
can be used with all 25mm, 37mm, 47mm and 2 inch diameter
filters and charcoal cartridges used for the collection of airborne
contaminants. An internal air filtering system has been installed
between the regulator valve and the pump to prevent particulates from reaching the self-adjusting carbon vanes and causing
excess wear. A re-settable elapsed time meter is mounted on
the instrument panel. By setting this timer to zero at the start of each sample period, an accurate
sample volume may be readily calculated.
SPECIFICATIONS
Air Flow Rate:
Adjustable from 1.0 to 7.0 CFM (25 to 200 LPM).
Air Flow Indication:
Venturi mounted rotometer.
Air Flow Regulation:
+5% of set air flow rate up to maximum capability of pump.
Air Mover:
Self-adjusting carbon vane type. Pump is designed for continuous
operation at 27” Hg vacuum.
Elapsed Time Meter:
99999 Hours and 59 minutes, pushbutton re-settable.
Vacuum Gauges:
0 to30” Hg (vacuum) for reading ΔP. 0 to 30” Hg (vacuum) for reading
pump head.
Wheels:
Steel axle with 8” rubber tires.
Motor:
3/4 HP; Thermal Overload Protection. (1/2 HP for 220V, 50Hz Operation).
Input Connection:
3/8” Female Quick Disconnect Fitting.
Power Connection:
6 Foot, three wire grounded cable.
Power Requirements:
115VAC, 60Hz, 15 Amps, or 230VAC, 50Hz, 8Amps.
Overall Dimensions:
18” Long x 12” Wide x 57” High (46 cm x 30 cm x 1.45 m).
Weight:
80 pounds (36 kg).
Air Samplers
RAD-Pro 5
RAD-Pro 5 Personal Air Sampler
The RADeCO RAD-Pro 5 is an industry leader in backpressure
performance, reliability and ease-of-use. This pump offers flow
rates up to 5 LPM respectively. And thanks to several advanced
features, this pump overcomes the main causes of sampling
errors – saving you time and money. The air flow display holds
calibration for 30 days, even with atmospheric changes. While
RADeCO air sampling pumps are known for their strength, the
back-pressure capabilities of the RAD-Pro 5 are the highest in the
industry for any personal sampling pump.
With the RAD-Pro 5 there is less risk of lost samples due to
battery failure. It incorporates a nickel-metal hydride (NiMH)
battery which, unlike a NiCd battery, doesn’t suffer from "memory" problems. So there’s no hidden
loss of battery capacity, no shorter-than-expected run time and no need for special battery maintenance. You use our standard charger and get the same, highly predictable life, charge after charge.
When the display indicates a "full" battery, that’s exactly what the pump delivers. Plus, the indicator
more accurately displays remaining life throughout the sampling period. You get faster charging too.
The NiMH battery fully charges in just five hours. And you won’t be hampered with special storage or
FEATURES
•
•
•
•
•
•
Up to 5 LPM Flow Rate
Highest back Pressure Capability
Programmable
Live Flow Display
NIMH Battery
EN-1232 Type B Compliant
Contact Us for GSA and Quantity Pricing
31
Filter Holders
In-Line
Filter Holders
Filter Diameter
Holder Number
2500-65
2500-67
Filter Diameter
Holder Number
47 mm
2”
B
B
47 mm
2”
2500-05
B,C
2500-19
2500-21
2500-27
2500-34
2500-35
2500-39
2500-46
A,D
B,D
A,C
A,D
B,C
A,C
B,D
Open Face
Filter Holders
RADēCO™ has available the finest line of precision machined, all aluminum, holders for air sampling
media. There are four different types of holders: (1) Open Face Filter Holder, (2) Inline Filter Holder, (3)
Open Face Combination Filter and Cartridge Holder, and (4) Inline Combination Filter and Cartridge
Holder. All four types are available for the RADēCO H809, H810, HD and AVS series of air samplers as
well as for other manufacturers models.
RADēCO pioneered the unique two O-ring method of preventing the sampling air from bypassing the
cartridge in the combination holder. This method of sealing the cartridge in the lower body eliminated
gasket creep and wrinkling which caused leakage past the cartridge.
All 47 mm, 2 inch and 4 inch holders are hard anodized to give the sample holders good chemical resistance to prevent oxidation and to color code the various parts. The main body of each holder is colored
blue, while the filter retainer nuts and the cartridge retainers are colored gold for 47 mm, black for 2 inch,
and blue for 4 inch.
Open Face Filter and Open Face Combination Holders for the HD & AVS series are supplied with a
mating 3/8 inch male quick disconnect fitting which will snap directly into the inlet of the samplers. All
inline type holders are furnished with a 3/8 inch male quick disconnect at both the inlet and outlet of the
holder.
When ordering, please specify the type of holder desired, the diameter of the filter to be used, and in the
case of a combination holder, the type of charcoal or silver zeolite cartridge (RADēCO or Scott) to be
used in the holder.
Open Face
Combination Filter
& Cartridge Holders
In-Line Face
Combination Filter
& Cartridge Holders
A-Threaded for 787, 809, 810 series
B-With 3/8” male quick disconnects for HD & AVS series.
C-Holds Scott cartridge
D-All RADēCO Cartridges
Note: All inline holders fitted with two 3/8” male quick disconnect fittings
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Filter Diameter 47 mm
Holder Number
2500-04
2500-23
2500-25A
2500-33
A
2500-42
B
Filter Diameter
Holder Number
2500-40
2500-41
2500-44
2500-45
47 mm
2”
4”
B
A
A
2”
B,C
B,C
B,D
B,D
Air Samplers
LAURUS WMD Kits
32
The Original Radiation Response Kits
Kit's May Include:
•
Three Person Kit
RAD-60 | Mini Rad-D | EXP
Eight Person Kit
RAD-60 | Mini Rad-D | EXP
Nuc-ID Kit
Mountaineer Kit
•
•
•
•
•
•
Dosimeters for Personal protection
◊ Rad-60 alarming dosimeter
◊ DMC 2000 alarming dosimeter
◊ Pocket ion chamber self reading dosimeter
◊ Dosimeter holders for attaching to a lanyard or grommet.
Inspector-EXP Survey Meter for Contamination Monitoring
Mini Rad-D personal radiation detector for rapid detection
Radiological air samplers for airborne threats
Training Guides
◊ Easy to follow
◊ Written manuals
◊ Interactive training CD Rom’s
Check Sources to ensure instrument responses
Pelican Brand Waterproof-Dustproof-Shock Resistant Cases
Custom Kits
ERK Kit
RDS Kit
Pelican Cases
RD-30 | RDS-80
LAURUS EOD Kit
Custom Response Kits
The first step in providing protection for risk and vulnerability is to be able
to immediately detect and respond to any potential radiological threat.
LAURUS Systems provides a wide variety of specialized response kits
designed to detect, identify, and analyze a radiological and/or nuclear
threat. Since not all responding organizations face the same threat levels,
or are responsible for the same degree of response, LAURUS Systems
designs kits that address the specific needs of the end-user. We can
assemble kits with any number of options from the products shown here,
but we are certainly limited to these configurations. Many other options
are available by request.
Waterproof • Dustproof • Rugged
Multiple Sizes • Multiple Colors
Versatile and Proven
Contact Us for GSA and Quantity Pricing
Completely redesigned from the ground up, the
lightweight and rugged new Fido® NXT delivers
fast, accurate and consistent explosives detection capabilities for combat,
physical security and anti-terrorism operations. The expanded detection
capabilities and reduced size of the Fido NXT enables the system to be
easily integrated into existing security measures.
The Fido NXT features a simplified user interface with a GO/NO GO
response suitable for novice users. Additional response information is
available via the administrator mode for fully trained operators and
system administrators. The system provides on-screen prompts for the
majority of user actions to overcome issues related to intermittent usage
and the associated loss of training knowledge enabling both novice
operators and explosives experts to use the device with confidence.
FIDO NXT
Encased in a ruggedized magnesium shell, the Fido NXT operates in all environments and has
passed one meter drop testing. This extremely sensitive device can operate for a full eight hours
on a single battery and requires no calibration. The Fido NXT starts up quickly, in less than five
minutes, and swiftly clears down after an explosives alert to permit rapid throughput.
The ergonomic design of the Fido NXT enables standardized, consistent sample presentation for
enhanced analysis. This new design mitigates the potential for interference from weapons,
communications systems, and other devices. With all-weather and day/night capability combined
with visible, audible and tactile alerting options, the Fido NXT is ideally suited to covert operations or screening in high risk or high threat environments.
33
Based on a breakthrough detection technology, the combat proven
Fido® XT is currently in use throughout Iraq and Afghanistan.
Unlike other systems, the Fido uses a polymer-based technology to achieve better and
faster detection results. This innovative material provides an immediate response before
rapidly resetting for continued screening operations.
FIDO XT
To mitigate the threat of improvised explosive devices, detection solutions must be sensitive, portable and flexible in their application capabilities. The Fido meets and exceeds these
requirements through its sensitivity and compact nature - helping users pinpoint people
involved in the construction, transportation and deployment of explosive devices.
Even after a positive detection result, screening operations can continue uninterrupted. Unlike other devices, the Fido
does not force the user to wait through excessive cleaning and clearing routines before using the device again. Rather, the
Fido allows users to locate trace amounts of explosive materials, quickly verify their results and continue screening the
surrounding area or additional personnel. This capability also enables the Fido to be mounted as a payload on a robot; the
only explosives detector to effectively do so.
Weighing less than three pounds, the Fido XT is small, fast and ultra-sensitive. In today’s asymmetric fight, working dogs
are an invaluable asset. Now, the size and sensitivity of Fido puts the capabilities of canine detection into the hands of the
war fighter, first responder and security personnel.
SPECIFICATIONS
Description:
Detection Technology
Power
AC Input
Auxiliary Battery Charger
(external)
Com Ports
Data Storage
Weight
Dimensions
Portable explosives detector
Fluorescent polymer based *
(no radioactive source required)
Internal battery: Lithium Ion
(8 hour life dependent upon
environmental conditions)
100 to 240 V, 50 to 60 Hz wall adapter (supplied)
System charges battery while running on AC power
AC Input: 100 to 240 V, 50 to 60 Hz wall adapter (supplied)
USB
2000 hours of continuous data logging
3.0 lbs including battery
14.5L x 4.5W x 2.75 H
The Fido® PaxPoint™ from FLIR is a
handheld, portable liquid screening system
capable of detecting liquids used in making
explosive devices. The instrument, which weighs less than four pounds, is capable of
quickly screening passengers, baggage, sealed containers and bottles for potential
threats. The Fido PaxPoint provides acute sensitivity in a rugged device suitable for
sustained use in an operational environment. Detection is performed in real time with
results presented on a display screen. In contrast to other detectors, the Fido PaxPoint can detect specific liquids used in homemade explosive devices through both
clear and opaque containers.
Fido Pax-Point
The Fido PaxPoint was designed to quickly screen passengers and baggage for liquid threats. Operation of the Fido
PaxPoint is straightforward, requires little training and is ready to use within two minutes of being powered on. Once an
operator receives a positive detection result, the Fido PaxPoint will recover rapidly for further screening operations.
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Chemical & Explosives
34
Chem-ID
The Chem-ID is a parts-per-billion gas analyzer that characterizes chemicals using two-dimensional gas chromatography. The chemical signatures of gases and out-gassing
liquids and solids are measured and recorded in the field.
Each chemical signature contains information on the individual compounds and concentrations of the chemicals present
in the sample. Because the Chem-ID is rugged, in can be
used in most locations and under most harsh conditions.
The Chem-ID operates using 4 large control buttons, a large
color LCD display, and menu-driven software. It can also be
operated by remote control via the built-in Bluetooth wireless
radio. The Chem-ID automatically performs the functions
needed to precisely measure a chemical sample, produce
and record the two dimensional chromatograph signature of the sample, and clean itself in preparation
for the next test. The two gas chromatograph columns in the standard Chem-ID use DB-1
(Dimethylpolysiloxane ) and DB-wax (Polyethylene glycol) stationary phases. Alternately, almost any
column can be installed to meet your unique test requirements. The Chem-ID comes standard with a
pre-concentrator loaded with Tenax TA as a trapping agent.
Griffin 460
The Griffin™ 460 mobile GC/MS identifies chemicals in complex samples,
providing protection of assets 24 hours a day, 7 days a week. Multi-modal
sample introduction allows the Griffin 460 to accept liquid, solid, and air samples.
The self-contained system can accept direct liquid injections via syringe or solid
phase micro extraction (SPME) fibers. Should users wish to expand the capabilities of the system, the split/splitless liquid injection port easily accommodates a
headspace sampler or autosampler. The air sampling module performs direct air
analysis via a sampling line or by thermally desorbing samples from the Griffin™
X-Sorber. Water analysis may also be performed via the Griffin™ Purge & Trap
accessory.
BENEFITS
APPLICATIONS
• Building and other asset protection (CWA &
TIC)
• Environmental contaminant analysis (VOC &
SVOC)
• Field forensics investigation (Narcotics &
Explosives
•
•
•
•
•
•
•
24/7 continuous air monitoring
Chemical identification with MS/MS confirmation
Intuitive interface requiring minimal training
Automated method selector tool
Remote handheld air sampler (X-Sorber)
Simple routine maintenance
Tested to MIL-STD-810G
Laboratory results in the field
Fido Verdict & ClearPoint
SPECIFICATIONS
Sensitivity*:
Detectors:
Battery:
sealed lithium ion
Battery Life:
Carrier Gas:
He Tank Life:
Communication:
Operating temperature
Range:
Relative Humidity:
Precipitation:
Vibration:
Emissions:
Decon methods:
Dimensions:
Weight:
25 ppb
(2) Thermal Conductivity
Rechargeable 28.8 volt
Fido® Verdict™ is a small, lightweight and ruggedized instrument for rapidly identifying suspicious liquids, solids and powdered materials. Designed specifically to identify the explosives,
liquid threats and narcotics commonly listed by the ATF and DEA.
12-14 measurement cycles
Ultra-pure helium
20 hours of constant operation
Built-in Bluetooth class 1 radio
Verdict uses well-established Raman spectroscopy to identify unknown materials directly
through sealed containers, minimizing exposure to potentially dangerous chemicals. During
interrogation, a spectrum is captured and compared against an application-specific library to
identify the principal components of the suspect sample. The simple three-button interface
means a sample can be presented, interrogated, analyzed, and the results provided in under 30
seconds.
-25º to 125º F
0-100% condensing
Driving Rain per Mil-STD-810
ASTM D4169-04A
FCC certified
External high pressure wash and brush
16” (14” w/o knobs) L x 8.6”H x 7.5”W
15.9 lbs`
Chemical & Explosives
ClearPoint is a desktop implementation of the GSA-listed Fido Verdict™ ruggedized,
palm-sized, Raman spectroscopy scanner for rapidly identifying suspicious liquids,
solids, and powdered materials.
By incorporating a radically different sampling approach and user software written from
the ground up to support bottled liquid screening, ClearPoint significantly improves
operator efficiency and reduces the possibility of operator error. Additionally, proprietary signal analysis algorithms minimize the impact of fluorescence and noise in acquired Raman spectra to
reduce false alarm rates below the level obtainable by standard correlation analysis.
Contact Us for GSA and Quantity Pricing
Chemical detection has never been easier. If half of the viewing window changes color - the chemical is present; it really is that simple. No
power, no calibration. The Chameleon’s rugged design allows for
use in extreme heat and extreme cold conditions and in wet or dry
environments. Even after immersion in water, just shake off the
residual water and detect the invisible threats.
Chameleon
35
Agentase Disclosure Spray
Agentase Disclosure Spray™ is an enzyme-based,
chemical agent detection system in a spray formulation. The solution changes color when sprayed on
surfaces contaminated with chemical warfare agents
(CWAs) providing emergency responders and other
critical personnel with simple, rapid and reliable
access to chemical agent detection.
SPECIFICATIONS
Cassette Shelf-Life:
Cassette Service Life:
Temperature Range:
Humidity Range:
Immersion:
Salt Water:
Fresh Water:
24 months room temperature*
24 hours*
-30 C to 50 C (-22 F to 122 F)
20 to 100%RH
1 Hour
1 Hour
The Basic Hazard Classification Kit is designed
to provide first responders a rapid and easy method to determine if unknown or suspicious materials
present a possible chemical, radiological or
biological hazard to the responder, population or surrounding environment. The procedure is not designed to identify the substance, but to determine if a possible hazard
may exist. The kit may be used by any
personnel with basic HazMat training skills.
HazClass Kit
Agentase CAD-Kit
The Agentase™ CAD Kit provides first responders with
the ability to conduct surface, solid and liquid interrogation of nerve (G&V series), blood (AC) and blister (HD)
agents, acids, bases, aldehydes and oxidizers. This kit
provides accurate results in field environments, improves detection limits to rival those of expensive
handheld electronic testing devices and provides fast signals that are easy
to interpret. The simplicity of this kit makes it user friendly for the entire first
responder community. Unlike other field detection equipment, the Agentase CAD Kit has extremely low rates of
false positives and negatives.
Before now,
there has not
been a methodology to effectively screen patients or
objects for trace levels contamination prior to providing
them with access to a facility. The Agentase™ Hospital
Readiness Kit (HRK) fills this void by providing hospital
responders with the tools to detect the presence of
harmful chemicals before they contaminate the hospital.
The Agentase HRK also provides sensors for use following the decontamination effort to ensure efficiency of
decontamination procedures. The Agentase HRK contains 180 sensors that detect the breadth of chemical
warfare agents and toxic industrial chemicals including nerve (G and V series), blood, and blister agents,
strong acids, bases, oxidizers and aldehydes as well as 40 training sensors and simulant for use in
annual decontamination exercises.
Agentase HRK
Three Critical Steps to Minimize or Eliminate the Potential for Cross Contamination:
• Chemical Detection: Use FLIR Agentase sensors to detect trace levels of chemical weapons and
toxic industrial chemicals.
• Decontamination: Utilize your current decontamination procedures to remove residual agents.
• Post Decontamination Verification: Assess the efficiency of decontamination procedures using
FLIR Agentase sensors before admitting patients into your facility. Failure to effectively isolate
your facility from contamination may result in afflicted care givers that can have a catastrophic
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Chemical & Explosives
20/20 Bio-Check Kit
36
20/20 Gene Systems’ BIOCHECK™ Kit helps first responders quickly determine--by
looking for a color change--whether a suspicious powder may contain a bio terror agent.
This is only a first step in determining whether a pathogen or toxin may be present.
BioCapture 650
The BioCapture® 650 was designed for first responders
working in unfamiliar, challenging and dangerous environments.
We know that emergency situations are no place for chemistry
set-ups and delicate instrumentation.
The product works primarily by using PurpleHaze™ Technology to identify
protein, found in all living material. All bio-warfare agents—including Anthrax
and Ricin— contain protein. On the other hand, many harmless substances
frequently mistaken to be potential bio-terror agents, such as powdered sugar,
drywall dust, cornstarch, and many cosmetics—do not. The BIOCHECK™
Powder Screening Test Kit also includes a test to determine pH. A positive with
this test further rules out any materials not containing bio hazardous materials;
these don’t normally survive acidic and basic environments.
BENEFITS
•
•
•
•
•
•
•
Save resources, time and reduce citizen concern over false alarms
Used by 100’s of first responder teams (including government agencies) nationwide
Rules out 87% of powders that cause citizens to call 911*
Simultaneously screen for the possible presence of multiple agents
Laboratory proven to screen for Anthrax**
Reduces your need for expensive, time-consuming agent identification
Results in 5 minutes!
The BioCapture is cutting edge air sampling technology packed
in a rugged, lightweight package. Large single button operation
means responders can quickly execute the sampling mission
and proceed to other objectives.
The key to the BioCapture is the integrated collector cartridge. With rotating impactor, fluid chamber, fluid
lines and sample vial pre-assembled in one disposable cartridge, the system is deployment ready when
you are. When the operation is complete, simply replace the cartridge and you are ready for your next
mission. There are no internal lines to decontaminate, no sand or dirt to clean out of moveable parts and
corners. Simplify your bio-sampling preparedness program with the
BioCapture.
The BioCapture represents a significant leap forward in air sampling technology. Incorporating the latest
technological breakthroughs in particle collection, the portable, handheld unit captures airborne pathogens and spores into a concentrated liquid sample. a snap-in, disposable sampling cartridge minimizes
set-up and decontamination. The BioCapture provides the user with an effective and easy-to-use instrument for fast, safe and efficient biological agent collection.
FEATURES
Pro HazClass Kit
Biological Protein Screening Test
• A Test for the Presence of Protein and pH
• Will Indicate if a Possible Bioterrorism Agent or WMD is Present
• Very Economical and Simple to Use
• Fast and Reliable Powder Test Kit In a Durable Re-Usable Case
•
•
•
•
•
•
•
•
•
Single button operation in hot zone
Deployment ready for emergency use
Laboratory effectiveness in a rugged 7.5 lb package
Collects typical agents released in a biothreat attack including bacterial spores (such as B.
anthracis, which causes anthrax), bacteria (such as Y. pestis, which causes plague), viruses
(such as smallpox) and toxins (such as ricin)
100% decontamination ability
Highly operable in sand, dust and inclement environments
Flexible sampling times
Disposable collector cartridge prevents cross contamination
Easy to operate by user in fully dressed Level A or MO PP-IV gear
Biological
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Contact Us for GSA and Quantity Pricing
IBAC
The IBAC™ is a real-time continuously
operating indoor or outdoor monitor that provides early warning
of biological aerosol threats. The IBAC facilitates the process
of identifying bio-terror agents to allow timely containment,
treatment and remediation. Monitors are designed to detect
concentrated levels of biological aerosols. Possible
agents released in a bio-threat attack can include bacterial
spores (such as B. anthracis, which causes anthrax), bacteria
(such as Y. pestis, which causes plague), viruses (such as
smallpox) or toxins (such as ricin).
IBAC monitors can operate independently or as part of a network configuration to form the “first
tier” of an airborne biological threat monitoring system. Communication and response can be
managed through existing building control systems or an independent network.
In addition to providing real time alerts to biological aerosol threats, the IBAC can trigger a secondary aerosol sample for subsequent analysis and identification. The C100™ modular tactical
collector is designed for field collection of bioaerosols. The collector is based on proprietary
rotating impactor technology and yields a 6 ml aqueous sample for field and laboratory analysis.
Integrated with the IBAC or deployed stand-alone, the C100 is optimized for enhanced collection
of small particles, such as single spores, and can collect a triggered or continuous aerosol sample.
The rugged design and high sensitivity allow the system to be deployed in severe environments
such as HVAC systems and outdoor settings.
37
The BioXC™ 200GX is an affordable approach to continuous or triggered bio-threat sampling. It is designed for seamless integration with
the Cepheid GeneXpert® PCR-based pathogen identification system. The innovative design of
the BioXC eliminates the need to transfer samples from a collection vial or cartridge into the
PCR cartridge, significantly reducing risk of inadvertent human exposure and re-aerosolization
of concentrated pathogens.
BioXC
The approach helps speed up the time from detection to confirmation testing and minimize the
risk of human contact with the sample. When a GeneXpert cartridge is placed into the BioXC
dispensing chamber, the concentrated liquid fills the vial for subsequent analysis. By automatically dispensing the
liquid into the cartridge, the BioXC eliminates the time consuming and costly process of transferring the sample
manually with a pipette. No additional fluidics are required.
The BioXC may also be integrated with the ICx Technologies AirSentinel® to create a trigger-based bio-threat
detection system. The AirSentinel would trigger the BioXC to take a sample only under threatening conditions,
rather than continuously, thus reducing the costs of consumables.
The BioXC uses our patented rotating impactor technology. This unique air-sweep approach allows high-volume
samples with low power requirements and reduced risk of re-aerosolization relative to wetwalled cyclones. The
BioXC isolates the air sample into the GeneXpert cartridge. The auto-dispense feature offers a safe and simple
approach to sample collection. To initiate the testing sequence, remove the cartridge from the dispensing station
and place it into the GeneXpert analyzer.
The C100 Modular Tactical Collector is intended to be used as a stand-alone
collector or as a component within a modularly-integrated system that would also
include detection and identification components.
C100
BioBadge
The BioBadge™ is a commercially-available, hand held, battery-operated
air sampler that collects airborne biological particles in the 1-10 micron
size range. It utilizes the ICx patented rotating impactor technology. The
BioBadge impacts airborne particles onto a collection disk that rotates at
high speed relative to the sampled air. An electronic motor drives the
collection disk via a magnetic coupling. This facilitates easy insertion and
removal of the sample from the unit. After sampling, particles are rinsed
from the collection disk for subsequent analysis.
Slightly larger than a cellular phone, the BioBadge is small and lightweight
enough to be worn by an individual for monitoring exposure to biological
organisms. It can be placed unobtrusively in an area suspect of contamination. It could be configured to be remotely operated (on/off) via wireless communication.
Available in two stand-alone versions, the C100-L and the C100-X, the C100-L has been
optimized for longer battery run time while the C100-X has been optimized for enhanced
collection of small particles such as single spores. Both versions may be operated via standard military battery or DC power. Initiation of a collection cycle can be manual using the
interface on the base unit or may be triggered for collection using a serial interface. Triggered
sampling time is firmware configurable and has a default time of 10 minutes. Continuous
sampling can be conducted on a single BA5390/U battery for eight to fourteen hours, depending on the model.
The collector is based on ICx Technologies rotating impactor technology and is designed to sample the ambient
air at a nominal flow-rate 150 liters per minute (lpm), depending on the model. The impactor rotates at high speed,
both entraining air into the system and collecting particles onto the surface. Following sampling, the rotating disk is
rinsed using pre-measured, individually-packaged fluid to extract the collected particles from the impactor into a
small liquid volume of buffered saline.
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Biological
38
OREX Modesty Clothing
OREX is the trade name for a line of garments and products that are uniquely and perfectly
suited for the needs of all classifications of Emergency Responders. Although they are
described as disposable, the performance and durability of the OREX fabric rival any cotton
or polyester garment. Not only do they compete favorably in cost, the range of products
that we offer exceeds that of any other product of this type. Our Personal Decon Kits are
comprised primarily with OREX garments and towels and are priced at nearly half of our
nearest competitor. Most noted for its light weight and comfort, the OREX products are
engineered and manufactured from a special, degradable polymer that is environmentally
friendly. Following use, the used products can be treated using a proprietary process that
dissolves the product in high temperature water (> 190 degrees F.), decontaminates it and
finally chemically converts it to carbon dioxide and water, much of which is returned to the
environment for reuse.
OREX Pre & Post
Decon Kits
The OREX Personal Decon Kits address the procedural
and logistic issues of mass decontamination operations
while offering unparalleled cost-effectiveness. Ultra
strong and absorbent towels along with our exclusive
protective slippers add to the overall value and performance of the OREX kits. Other factors absent from products of this type have been garment durability and waste
management of radioactively contaminated materials.
The Personal Decon Kit utilizes patented OREX products that are made from a special, degradable polymer that is tough, breathable, and environmentally friendly. Following deployment, used products can be
treated offsite using a proprietary process that dissolves the product, decontaminates it, and ultimately
converts it to carbon dioxide and water. Responsiveness and commitment to the end-user is further
illustrated by the fact that LAURUS provides the only Decontamination and modesty clothing specifically
designed for the smaller (child’s) user. Until now, a forgotten patient group that will require more privacy
and durability capabilities than any other users.
Unparalleled comfort and modesty along with cost effective procurement make the OREX clothing and
decon kits a logical and easy choice to make. Available through the LAURUS GSA schedule and the Multi
State HIRE contract. Please call for quantity pricing and delivery times.
Products
• Pre/Post Decon Kits
• Coveralls
◊ Regular—Zipper Front
◊ Splash Resistant—Zipper Front
• Lab Coats
• Towels
• Shoe Covers
• Scrubs
◊ Long
Pant
◊ Short Pant
◊ Long Sleeve Top
◊ Short Sleeve Top
• Hoods
Standard Kit
• Personal belongings bag w/ name tag
• Two part wrist ID bracelet
• Pre decon white robe
• Bath size towel
• Scrubs; long pants, v-neck top
• Hard sole slippers
• Double bagged and vacuum sealed
• Custom configurations and child sizes available!
Ph (410) 465-5558 | Fax (410) 465-5257 | [email protected]
Protective Clothing
39
Calibrations & Maintenance
LAURUS Systems can provide calibration and maintenance
services for virtually any and all radiation instrumentation.
Our services are available on many State Contracts, including the H.I.R.E. Multi State Contract as well as through our
GSA Contract. All of our maintenance and service associates are ready to serve you professionally and efficiently.
Instruments from LAURUS Systems, such as electronic
alarming dosimeters and survey meters come with a one
year manufacturer warranty. The manufacturers recommend
calibration on a yearly basis for most instruments. There is
no other regular maintenance or adjustment needed on the
radiation detection instruments.
LAURUS Systems has built a reputation on exceeding customer expectations regarding
instrument support and service. We can also create Maintenance Service Agreements to
meet specific needs and requirements. Please contact us for pricing and return information.
Computer Based Learning
Laurus has developed a number of easy-touse computer based individual training
presentations and tutorials. Although not
meant to replace face to face training, our
affordable and easy to follow training
programs offer users a suitable alternative
for many of our widely used detection and
monitoring instruments. These personal
learning aids are very helpful for maintaining on-going equipment familiarization and
refresher training. Convenient and economical instrument training is available
anytime, anywhere.
Services
You don’t have to go anywhere to get
face-to-face training. Whether it is
instrument-specific or topical, our experienced team will bring knowledge to you.
Your organization will benefit from on-site training with the equipment and systems
that your own and use. This ensures that we thoroughly cover the topics and
procedures that are important to you. We’ll consult with you and evaluate your
needs to utilize the ideal curriculum and hands-on exercises. When we leave, your
employees will be confident with the systems and their ability to use them.
On-Site Training
Our users find that this option works well for organizations that want more individualized instruction. It’s a cost-effective way to train several users at once with one-onone instruction and can include or be exclusively a train the trainer scenario. This
will allow selected personnel to more actively participate in the training process.
We also offer you the opportunity to come to our Ellicott City, Maryland training facility and learn from experienced
Laurus employees and practice your skills on our equipment and instrumentation. By the time you go home, you will
feel comfortable and ready to fully utilize your instruments and systems.
Whether you're a new customer, an existing client, or in need of a comprehensive training program, Laurus face-toface training is a great way to master our products and maximize end-user capabilities.
Custom Training Solutions
Whether you are implementing the latest technology or preparing new employees to step
into their roles within your organization, remember that your most valuable resource is
the human one. When your team members are appropriately trained, they will be
successful.
Laurus Systems offers solutions to training and performance issues brought about by
technological, procedural, or regulatory changes. We are experienced in the instruments we provide as well as in the use of these technologies in the field. Our expertise
goes beyond that however as we can provide practical training for virtually any radiation
detection instrumentation. Likewise, we can provide programs to help your staff understand and better respond to the radiological issues that they will face in a sensible and
easy to comprehend format.
Our experienced staff and contract personnel will help your perform a needs analysis, create and implement a custom
solution tailored to your needs, determine whether your training investment is achieving the desired results, and offer
you a number of delivery options.
Contact Us for GSA and Quantity Pricing
40
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
1
Advantages for the Seller
• Access to unlimited number of buyers in the U.S., Canada
and South America-looking to purchase, enhance or
upgrade their instrument inventory
• Free basic listing-pay only when you sell, enhanced
listings available
• Calibration and repair services to enhance your offering
• Advertising options for qualified Instrument
Manufacturers and Service Providers
Advantages for the Buyer
RAD-Trader.com, the exclusive online
center for connecting buyers and sellers
in the detection marketplace.
• Access to detection equipment previously beyond
your budget
• Free posting of items wanted
• Community forum to post questions and links to
resourceful websites.
• Secure purchase options
http://www.RAD-Trader.com | Toll Free: 1-800-875-8523
Call for Advertising Opportunities
2
V 02-2012
3460 Ellicott Center Dr, Suite 101 | Ellicott City, MD 21043
www.LaurusSystems.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement