UltraMig - AMH Canada
Research & Development • Safety • Production
CANADALTD
AMH Canada Ltd is a canadien
Sweden
Canada
Quebec
company established in Rimouski, Quebec
since 1978 and founded in 1953.
The company consists of three divisions,
Blue Boy®, specialized in the
manufacturing of pipe benders, portable
pipe expanders and end forming
equipment, Controlled Systems®,
specialized in the manufacturing of
welders, and Spectratek®, specialized
in the process of paint drying with
the lnfrared curing lamps and
UHraviolet curing lamps.
AMH Canada's wide markets include:
industriel sector, automotive manufacturing,
service and collision repair.
Our high quality and state-of-the-art
products are distributed in more than
70 countries worldwide.
AMH has enjoyed steady growth thanks to
continuous research and new product
development to meet market demand.
AMH Canada Ltd.
391, rue St.Jean-Baptiste Est
Rimouski (Quebec) Canada GSL 1Z2
CANADA and other countries:
Tel. : (418) 724-4105 Fax: (418) 722-6108
USA:
Tel. : (910) 371-9313 Fax: (910) 371-9417
EUROPE:
Tel. : +33 6 16 99 54 08
ASIA:
Tel. : +8610 88 86 40 98
Email: [email protected]
Sta
COpyr ight @ 20 13
Ger many
Belgium
France
Spain
Mexico
South
America
.
Customer's Service • Marketing Department
Table of Contents
ADVANCED DENT PULLING SYSTEM
Japan
China
RESISTANCE SPOT WELDER
SYNERGIC MIG WELDER
f
INVERTER AIR PLASMA CUTTER
UV CURING SYSTEM
Africa
--.._ ... ,-
INFRA-RED CURING SYSTEM
AIR DIFFUSER
PIPE BENDING AND
END FORMING EQUIPMENT
NewZealand
SYNERGIC MIG WELDER
ACCESSORIES
RESISTANCE SPOT WELDER
ACCESSORIES
BENDING AND
END FORMING TOOLING
Visit our website:
www.amh.ca
AMH Canada Ltd reserves the right to make
changes in the equipment described in this catalog.
Texts and photographs herein
are provided for information only.
CompuSpot 160 Digital
Professional Dent Puller with
Modern Touch Pad Control
Digital display with keypad control of ti me and power,
including welding mode and language selection.
CompuSpot 1BOAL
Aluminium Dent Pulling System
Utilizes capacitive discharge with extra safety features.
Includes welding gun, 2 ground clamps, 3 welding tips, plus supply
of threaded 4, 5 and 6mm pulling studs.
Compact l l "x 11 " x 9 " (280x 280x 229mm).
Complete with hand lifter, hook and 3 puller mandrels.
Light weight (only 481bs, 22kg.).
Slide hammer and larger pulling studs optional .
Quick change electrodes.
Quick star washer dent pulling: fast and easy to use slide
hammer included .
Weld studs (nails), washers, rivets for interior panel and
window molding (ali tips included) .
May also be used for dent pulling steel and stainless steel.
Digital touch pad control.
Ready and discharge (trigger) lights in the gun base, let the operator
focus on the application rather than the control panel.
Shrinking with copper tip for high spot.
115VAC (lOA) / 230VAC (6A), Single phase, 50-60Hz
Easy access around vehicles .
Capacitance: 66mF
Power208/240V(30A)or
Welding energy: 50l/40V, 1600l/220V
380/415V (20A),
Single Phase,
Secondary Open-Circuit Voltage:
UMIN:20V, UMAX:25V
3,500 Output power.
@cE
No. Reference
28.CPS161
28.CPS164
14.CS.00.30
Ill
No. Reference
CompuSpot 160 380-415V / 20A / 50-60Hz
Cart
28.CPS180
14.CS.00.40
CompuSpot 180AL
Cart
CompuSpot 325, 425 & 525
CompuSpot 550
Multi-Function Compression Spot Welder
High performance compression spot welder
Designed to reduce panel drilling, MIG weld plugging,
and grinding to a minimum .
Backlit LCD for clear readout of weld power and ti me plus
diagnostics display. Four memory slots per weld function for
storage of customized pre-sets.
High welding current delivers superior performance on today's sheet
metals including galvanized and high-tensile steel. A variety of
accessory electrode arms for the versatile pneumatic clamps can
reach up to 90% of the automobile body.
Easily interchangable electrodes provide single side spot welding for
places without access to both sides of the panel. A full complement
of dent pulling accessories and heat shrinking accessories is included.
Permanently attached air cooled welding ca bles provide maximum
flexibility and increa ses shop productivity.
Liquid cooled system .
High pressure pneumatic clamping:
160daN at 8 bar (3621bf at 115psi).
Power supply requirements:
208/230V (50A) or 380/415V (32A), 3-Phase.
Main frequency: 50-60Hz.
Max transformer current: ll,OOOA.
Power supply requirement:
208-240V (50A) or 380-415V (32A),
single phase .
No. Reference
28.CPS574
28.CPS583
Main frequency: 50-60Hz.
Max transformer current:
ll,OOOA (CPS525)
9,500A (CPS425)
CompuSpot
7,500A (CPS325)
No. Reference
28.CPS336
28.CPS339
28.CPS426
28.CPS429
28.CPS436
28.CPS439
28.CPS574
28.CPS583
28.CPS574
28.CPS583
CE
CompuSpol325 wilh G Clamp 160daN, 20Q.240V, Air cooled
CompuSpo1325 wilh G Clamp 160daN, 380-415V, Air cooled
CompuSpo1425 wilh C Clamp 180daN, 200·240V, Air cooled
CompuSpo1425 wilh C Clamp 180daN, 380-415V, Air cooled
CompuSpo1425 wilh G Clamp 160daN, 200·240V, Air cooled
CompuSpo1425 wilh G Clamp 160daN, 380-415V, Air cooled
CompuSpo1525 wilh C Clamp 180daN, 200·240V, Air cooled
CompuSpo1525 wilh C Clamp 180daN, 380-415V, Air cooled
CompuSpo1525 wilh G Clamp 160daN, 200·240V, Air cooled
CompuSpo1525 wilh G Clamp 160daN, 380-415V, Air cooled
CE
CompuSpo1550 wilh C Clamp, 380-415V 3·Phase, Liguid cooled
CompuSpo1550 wilh G Clamp, 200·240V 3·Phase, Liguid cooled
Shawn wi th pn eumatic G Clamp .
Optional C Clamp avai lab le .
CompuSpot 700HF
CompuSpot 750HF
High frequency Inverter compression spot welder
High performance compression spot welder
Designed and built in cooperation with car manufacturers to meet
the requirements for repairing ultralight and ad van ced high
strength steel s including boron alloys.
Liquid cooling system.
Advan ced inve rter t echnolog y for boron alloys and
high strength steels .
Liquid cooling sy stem .
Digitally controlled programmable weld settings for
producing factory quality weld s.
Advanced inverter technolog y.
Digitally controlled programmable weld setting s
for producing factory quality weld s.
Maximum tip pressure :
410daN at 8 bar (9251bf at 115psi).
Maximum tip pressure : 550daN at 8 bar (1,2251bf at 115psi)
Power supply requirements:
208/230V (60A) or 380/415V (32A) or 440-480V (40A)
3-Phase.
Power supply requirements :
208/230V (70A) or 380/415V (32A), 3-Phase.
Main frequency: 50-60Hz.
Main frequency: 50-60Hz.
Max welding current: 12,000A.
Max welding current at the electrode tips: lO,OOOA.
Approved and
recommended by:
Approved and
recommended by:
MARUTI ~~~~ $ SUZUKI
•
CHR:VSLER
CE
(@·
CE
c
(@·
Available EMF Cables conform to 2004/40/CE
standard and pr EN505005 & 50445
c
us
@
No. Reference
28.CPS723
28.CPS733
28.CPS724
28.CPS725
us
@
Available EMF Cables conform to 2004/40/CE standard
and pr EN505005 & 50445
No. Reference
CompuSpot 700 with C Clamp, 208-230V
CompuSpot 700 with G Clamp. 208-230V
CompuSpot 700 with C Clamp, 380-415V
CompuSpot 700 with C Clamp, 440-480V
3-Phase. 60A, Liguid cooled
3-Phase. 6DA. Liguid cooled
3-Phase. 32A, Liguid cooled
3-Phase. 40A, Liguid cooled
28.CPS773
28.CPS774
28.CPS783
28.CPS784
CompuSpot 750 with C Clamp
CompuSpot 750 with C Clamp
CompuSpot 750 with G Clamp
CompuSpot 750 with G Clamp
410daN,
410daN,
450daN,
450daN,
208-230V
380-415V
208-230V
380-415V
3-Phase,
3-Phase,
3-Phase,
3-Phase,
?DA,
32A,
70A,
32A,
Liguid
Liguid
Liguid
Liguid
cooled
cooled
cooled
cooled
CompuSpot BOOHF
CompuSpot BOOHF Max
Heavy duty liquid cooled Inverter spot welder
Twin liquid cooled clamps
Powerful 550daN C Clamp.
Achieves maximum cavera ge of the car body.
Digital di splay of tip pressure and arm selection .
Offers the best features of bath clamp styles.
Easy keypad selection of clamp style.
Wide variety of electrode arms available .
Complete electrode arm package .
Welds ali boron and advanced high strength steels.
Complete electrode arm package .
C Clamping force over 550daN at B,5 bar (1,2251bf at 125psi).
G Clamping force over 160daN at B bar (3601bf at 115psi).
Maximum tip pressure 550daN at B,5 bar (1,2251bf at 125psi).
Power supply requirements:
20B/230V (BOA) or 3B0/415V (32A) or 440/4BOV (40A), 3-Phase.
Power supply requirements:
20B/230V (BOA) or 3B0/415V (32A) or 440/4BOV (40A),
3-Phase.
Main frequency: 50-60Hz.
Main frequency: 50-60Hz.
Max welding current: 14,000A.
Max welding current: 14,000A.
Also available in conformity with the follo wing standards:
CE
Also available in conformity with the following standards :
EMF Cables conform to 2004/40/CE standard
and pr EN505005 & 50445
CNOMO
EMF Cables conform to 2004/40/CE standard
and pr EN505005 & 50445
Conform to CNOMO E34.12. 100.N Standard
CE
CPSSOOHF approved
and recommended by:
SUZUKI
@ Mercedes-Benz
CHR:VSLER
~
TOYOTA
Œ2D
HON DA.
PEUGEOT
Il
CITROËN
RENAULT
CE
CE
(@·
c
No. Reference
2B.CPSB23
2B.CPSB04
2B.CPSB05
2B.CPSB33
us
®
CompuSpot BOO with C Clamp, 20B-230V 3-Phase, BOA, Liguid cooled
CompuSpot BOO with C Clamp, 3B0-415V 3-Phase, 32A, Liguid cooled
CompuSpot BOO with C Clamp, 440-4BOV 3-Phase, 40A, Liguid cooled
CompuSpot BOO with G Clamp, 20B-230V 3-Phase, BOA, Liguid cooled
(@·
c
us
®
No. Reference
2B.CPSB03GC
2B.CPSB04CH
CompuSpot BOOHF Max with C & G Clamp, 20B-230V 3-Phase, BOA, Liguid cooled
CompuSpot BOOHF Max with C & G Clamp, 3B0-415V 3-Phase, 32A, Liguid cooled
850
COM1'PI!l~I2_0T
~
. ,· ......
CompuSpot 850
Inverter Spot Welder
The Next Generation o lnverter Spot Welders
Welding today's high strength dual phase and boron steels with up ta
630 daN ( 1,3861bf) of tip pressure, 14,000 amps of welding current
USB port for data transfer and program updates.
Weld history log re cording each weld performance.
Assisted mode with factory presets of 5 metal ty pes
and 8 metal thicknesses.
The reports saved on the USB key.
CompuSpot
Liquid cooling ali the way ta the electrode tips.
7" touch screen control panel with high resolution
color (800x480px) .
Maximum tip pressure 630daN at
8 , 5 bar (14161bf at 125psi).
Power supply requirements :
208/230V (70A) or 380/41SV (32A), 3-Phase.
Main frequency: 50-60Hz.
Max welding current: 14,000A.
Also available in conformity with
the follo wing standards :
CE
CE
No. Reference
28.CPS853
28.CPS854
28.CPS863
28.CPS864
CompuSpot85D wilh C Clamp,
CompuSpot85D wilh C Clamp,
CompuSpot85D wilh G Clamp,
CompuSpot85D wilh G Clamp,
2DB-23DV
38D-415V
2DB-23DV
38D-415V
3-Phase,
3-Phase,
3-Phase,
3-Phase,
?DA, Liguid cooled
32A, Liguid cooled
?DA, Liguid cooled
32A, Liguid cooled
EMF Cables conform to 2004/40/CE
standard and pr ENSOSOOS & 50445
CompuSpot 900 Fusion
Advanced Inverter Spot Welder
The ideal answer for how to weld t oday 's high strength dual phase and
boron steels with up to 630 daN ( 1,3861bf) of tip pressure, 14,000 amps
of we lding current, and no guess work .
Automatic recognition of sheet thickness and material t ype
(HSS , UHSS, Boron , etc.)
Automatic setting of weld power, weld ti me, and tip pressure .
USB port for data tran sfer and program updates.
Weld hi story storage .
Liquid cooling ali the way to the electrode tips.
7" touch screen control panel with high re solution
color (800x480px).
Maximum tip pressure 630daN at 8,5 bar
(14161bf at 125psi).
Power supply requirements:
208/230V (70A) or 380/415V (32A) or
440/480V (40A) 3-Phase.
Main frequency: 50-60Hz.
Max welding current: 14,000A.
Also available in conformity with the
follo wing standard s:
EMF Cables conform to 2004/40/CE (
standard and pr EN505005 & 50445
E
Measures the thickness of the metal and its electrical
resistance to determine its properties and surface coating.
Based upon the measurements, the Fusion will automatically adjust
the settings or suggest a factory specified weld program .
With this new equipment the operator no longer needs to worry about
setting the correct welding parameters .
CE
No. Reference
28.CPS903
28.CPS904
28.CPS905
28.CPS913
28.CPS914
28.CPS915
CompuSpot 900 Fusion with C Clamp,
CompuSpot 900 Fusion with C Clamp,
CompuSpot 900 Fusion with C Clamp,
CompuSpot 900 Fusion with G Clamp,
CompuSpot 900 Fusion with G Clamp,
CompuSpot 900 Fusion with G Clamp,
208·230V
380415V
440480V
208415V
380415V
440480V
3·Phase,
3·Phase,
3·Phase,
3·Phase,
3·Phase,
3·Phase,
70A,
32A,
40A,
70A,
32A,
40A,
Liguid cooled
Liquid cooled
Liguid cooled
Liguid cooled
Liguid cooled
Liguid cooled
CompuSpot l 000 INDUSTRIAL
Advanced Spot Welder Clamp for Industrial Applications
The solution for spot welding and the demands of mass production in the sheet
metal & body-in-white industry.
1000
IGBT, transformer and electrode arms are water cooled.
CoMPIISPoT
*
Ensured weld quality: Adaptive closed loop control systems effectively process
highly-variegated material combinations (Dynamic Resistance).
6 programmable user levels.
CompuSpot 1000 Specifications:
Clamping force: 1150daN at 8 bar (25401bf at 115psi).
Power supply requirements: 380/415V with 32A D curve protection.
CompuSpot
Main frequency: 50-60Hz.
Max welding current: 15,000A.
Suspended Cabinet Specifications:
Main voltage: 400-500V 3-Phase.
Main frequency: 50-60Hz.
Dimensions (WxHxD): 575x565x250mm (23"x22"x10").
Weight: 39Kg (861bs).
Network System:
Automatic identification of connected welding to the control
unit via Ethernet network.
ETHERNET 100/10
Control Units
ETHERNET 100/10
Server
ETHERNET 100/10
1
-------
r. - - .
Suspended
Cabinet
Suspended
Cabinet
Spot Welding
X Gun
Spot Welding
X Gun
Assembly Lines
Assembly Lines
Suspended
Cabinet
Assembly Lines
No. Reference
28.CPS1000
c~;$(:.
CompuSpo11000, 380-415V 3-Phase, 32A, Liguid cooled
UltraMig 185
UltraMig 200
Versatile synergie shop MIG
for heavier work
Powerfull 100°/o mieroprocessor
controlled synergie MIG
Designed to obtain optimum results in any welding application .
No compromise on performance quality.
A powerful machine at a reasonable priee .
The UltraMig 185 produces less sparks and spatter because wire
speed and power are perfectly synchronized.
Damage to glass, painted surfaces, and upholstery
is considerably reduced.
Ideal for MIG welding of steel, aluminium and stainless steel.
Programmed for three wire sizes for steel or aluminum.
Ultra fine tuning system for optimum results.
Capable of welding from 24 ga. To 3/8 inch steel.
This machine is also suitable for MIG welding stainless
steel and aluminum .
Designed for MIG weld from steel to aluminium.
100% microprocessor controlled .
Synergie control on the handle allows preci se
adjustments while welding (patented ) .
Three welding modes: continuous, spot and stitch (standard ) .
Manual and Synergie control.
Spool gun receptacle is alread y built in.
10' torch cable and 25' AC power cable .
200V-240V (30A),
1 Phase, 50-60Hz.
Patented "self-compensating" wire drive system adjusts
for any wire size and prevents "bird nests.
UltraMig®
UltraMig®
Maximum output: 225A
Maximum output: 200A
No. Reference
28.800.22. 15- AMERICA
28.800.22. 16- EUROPE
@cE
UltraMig 185, 200-240V 1 Phase, 30A, 50-60Hz
UltraMig 185, 200-240V 1 Phase, 30A, 50-60Hz
No. Reference
28.800.22.20
28.800.22.21
28.800.22.30
28.800.22.31
[email protected]@·
c
us
UltraMig 200, 200-240V 1 Phase, 30A, 50-60Hz, 1 Connector
UltraMig 200, 200-240V 1 Phase, 30A, 50-60Hz, 2 Con nectars
UltraMig 200, 380-415V 1 Phase, 20A, 50Hz, 1 Connector
UltraMig 200, 380-415V 1 Phase, 20A, 50Hz, 2 Con nectars
UltraMig 225 & 225HP
UltraMig 260 and 260A
for MIG brazing and MIG welding aluminium
Heavy duty synergie MIG series
Additional programming for silicone bron ze wire in 3 sizes.
Designed for optimum performance on both thin and thick
material without sacrificing weld quality.
Digital display of output volts and amps.
100% microprocessor control.
Easy t o use key pad selection of wire t y pes, sizes,
and welding m odes.
Ultra fine tuning syst em for optimum res ults.
Designed for the widest variety of appli cations
including the MIG brazing with sili con e bronze wire of AHSS,
boron alloys, and full y gal vanized steel.
Accommodates the sy nergie spool gun.
UJfraMig®
Three welding mod es and four possible rang es.
Accommodates up to 301b wire spool.
Durable MB26 sy nergi e torch with 10' welding cable ( 15' optional ).
Patented wire drive system.
Ultra fine tuning system for greater precision.
Maximum
output:
225A
Ideal for MIG weld of steel, stainless steel, aluminium.
Sy nergie spool gun available .
UltraMig 260A - Reverse polarity in MIG and STICK welding modes.
Maximum
output:
300A
[email protected]·
c
us
No. Reference
28.800.22.40
28.800.22.41
28.800.22.42
28.800.22.43
28.800.22.45
28.800.22.46
UltraMig®
UltraMig 225, 380415V 1 Phase, 20A, 50Hz, 1 Conneclor
UllraMig 225, 380415V 1 Phase, 20A, 500Hz, 2 Conneclors
UllraMig 225, 380415V 1 Phase, 20A, 50Hz, 2 Molors
UllraMig 225, 200-240V 1 Phase, 30A, 50-60Hz, 2 Molors
UllraMig 225, 200-240V 1 Phase, 30A, 50-60Hz, 1 Conneclor
UllraMig 225, 200-240V 1 Phase, 30A, 50-60Hz, 2 Conneclors
Synergie Spool Gun
Design ed for aluminium or MIG brazing with
synchronized thumb knob control of wire speed
and voltage. 20' torch cable standard . In cludes
spool of .6mm (.024) aluminium wire.
Runs wire sizes .6mm (. 024) to 1. 2mm (.045).
[email protected](@·
c
us
Use with UltraMig 225 and 200.
No. Reference: 03.700.00.42
No. Reference- UltraMig 260
28.700.00.30
28.700.00.45
28.700.00.50
UllraMig 260, 208-230V 1 Phase, 50A, 50-60Hz, 2 Wheel drive
UllraMig 260, 380415V 1 Phase, 32A, 50-60Hz, 2 Wheel drive
UllraMig 260, 380415V 1 Phase, 32A, 50-60Hz, 4 Wheel drive
Auto-darkening Electric
Welding Helmet
Adjustable shades 9 t o 13.
Variabl e sensiti vity and delay.
ANS! Z87.1 2003
4/9-13 1/3/2 EN379
cE
No. Reference- UltraMig 260A
28.700.01 .05
28.700.01 .06
28.700.00.50
UllraMig 260A, 208-230V 1 Phase, 50A, 50-60Hz, Arc-Mig, 2 Wheel drive
UllraMig 260A, 208-230V 1 Phase, 50A, 50-60Hz, 2 Conneclors, 2 Wheel drive
UllraMig 260A, 380415V 1 Phase, 32A, 50-60Hz, 2 Wheel drive
UltraMig 350 Inverter*
Synergie MIG welder with Inverter Power Source
UltraCut 40E
Digital control.
Portable Inverter Air Plasma Cutter
100% microprocessor control .
High frequency 220V (50-60Hz)
Inverter with variable output control.
Maximum 40A output at 60% duty cycle .
Three welding modes:continuous, spot
and stitch (standard ) .
Synergie control for faster and easier set up.
Patented wire dri ve system . Four-Wheel dual
drive or t wo-wheel single drive
Cuts stainless steel and aluminium upto 1/ 2 inch thick
(severs eut 5/8 inch thick).
Metal plates with different thickness
can be curve-cut into any shape.
Ultra fine tuning sy stem for
greater precision .
Air regulator with water separator
for longer tip life included .
Ideal for MIG weld of steel ,
stainless steel and aluminium .
Fan assisted air-cooling with
temperature overload protection .
Porta drive included .
Power source:
380-415V (25A),
3-Phase, 50Hz
Cames with "Back Up Pack"
of tips and nozzles.
Maximal output: 350A
No. Reference
28.700.03.50
UltraMig 350, 380-4 15V 3-Phase, 50Hz
UltraMig 500 Inverter*
Synergie MIG welder with Inverter Power Source
Digital control.
100% microprocessor control .
Three welding modes:continuous, spot
and stitch (standard ) .
Synergie control for faster and easier set up.
Patented wire drive system . Four-Wheel dual
drive or t wo-wheel single drive
Ultra fine tuning system for
greater precision .
Ideal for MIG weld of steel,
stainless steel and aluminium .
Porta drive included .
Power source:
380-415V ( 40A),
3-Phase, 50-60Hz
Maximal output: 500A
No. Reference
No. Reference
28.700.05.50
28.PCA40E
Plasma Cutter lnverter, 220V, 50-60Hz
spectratek
v
Spectratherm 2400800
Double head UV curing lamp
Fast, safe, efficient UV curing for automotive
repair and industrial finishes.
Designed and built in Canada for worldwide use on ali current
ultraviolet light curable fillers, base coats (primers),
top coats, and clear coatings .
• Almost instant full cure with no heat.
• Ready to sand, buff and deliver
in under 3 minutes.
• Filters out ali harmful UVB and UVC.
An easy to use double head UV
curing lamp for a greater curing area .
• IP30 (The enclosure provides a protection
against access to hazardous parts).
The designed system allows a
multiple head positions .
• Cooling fans in each head to extend bulb life.
The heads are supported by a
lightweight, strong and
stable column .
Vertical Height : 1. 7m (67")
Spectratherm 2400400
Single head UV curing lamp
An easy to use single
head UV curing lamp
at low purchase priee
and running cost than
other conventional
methods .
CURING AREA
32" X 24" (768in 2 )
BOcm x 60cm ( 4800cm 2 )
The head is supported by
a lightweight, strong and
stable column .
Power consumption: SOOW
Vertical Height : 1.4m (55 " )
CURING AREA
16" X 24" (384in 2 )
40cm x 60cm (2400cm 2 )
Power consumption: 400W
No. Reference
28.SPT400U V
CE
No. Reference
28.SPT800UV
CE
Spectratherm 2400800, SOOW, 230V 1 Phase, 50-60Hz
Spectratherm 3400800
Spectratherm 34001600
Double head UV curing lamp
Quadruple head UV curing lamp
A double head UV curing lamp supported by a robust column
and arm . The base also provides a superior stability.
A quadruple head UV curing lamp supported by a robust
column and arm . The base also provides a superior stability.
Purchase priee and running cost lower than other
conventional methods .
Purchase priee and running cost lower than other
conventional methods .
Locking rear casters .
Locking rear casters .
Adjustable lamp arrays.
Adjustable lamp arrays.
Vertical Height: 2.4m (95 " )
Horizontal Height: 2.0m (79")
Effortless lamp unit
adjustment with gas
cylinder and gas booster
cylinder.
Vertical Height: 2.4m (95")
Horizontal Height : 2.0m (79 " )
CURING AREA
32" X 24" (768in 2 )
SOcm x 60cm ( 4800cm 2 )
CURING AREA
Power consumption: SOOW
32" X 48" (1536in 2 )
SOcm x 120cm (9600cm 2 )
Power consumption: 1,600W
No. Reference
28.SPT802UV
CE
Speclralherm 3400800, BOOW, 230V 1 Phase, 50-60Hz
No. Reference
28.SPT1 600UV
CE
Spectralhenn 34001600, 1600W, 230V 1 Phase, 50-60Hz
Spectratherm l 000
Spectratherm 1200
Economie Infrared curing lamp
Infrared curing lamp
Cu res on any substrate, putty or primer.
Cu res on any substrate, putty or primer.
Automatic tim ed shut-off reduces
chance of damage to finish due
to overheating .
Automatic tim ed shut-off reduces
chance of damage to finish due
to overh eating .
Uniform, focused cure area No hot or cold spot.
Uniform, focused cure area No hot or cold spot.
,+,.,1
7
~:> n~
spedra
l_l,®W
1
Easy to operate.
Easy to operate.
Chrome- plated column .
Power consumption:
1200W
Power consumption:
lOOOW
@ ·us CE
c
No. Reference
CE
No. Reference
28.SPT1000
Speclralherm 1000, 1000W, 200-240V 1 Phase, 50-60Hz
See page 18 for replacement IR bulb light
28.SPT1200
28.SPT. 1200T
28.SPT1202
Speclralherm 1200, 1200W, 100-120V 1 Phase, 60Hz
Spectralherm 1200, 1200W, 200-240V 1 Phase, 50-60Hz, Telescopic
Speclralherm 1200, 1200W, 200-240V 1 Phase, 50-60Hz
See page 18 for replacement IR bulb light
Spectratherm 2400
Double Head Infrared curing lamp
Double lamp array.
Cures on any substrate, putty or primer.
Automatic timed shut-off reduces
chance of damage to finish due
to overheating .
Spectratherm 240050
Double Head Infrared curing lamp digital
Double lamp array.
Cures on any substrate,
putty or primer.
Optical measuring of distances.
Digital co ntrol.
Uniform, focused cure area No hot or cold spot.
Power consumption:
2400W
Power consumption:
2400W
CE
No. Reference
28.SPT. 2400
28.SPT.2400SD
Uniform, focused cure area No hot or cold spot.
Speclralherm 2400, 2400W, 200-240V 1 Phase, 50-60Hz
Speclralherm 2400, 2400W, 200-240V 1 Phase, 50-60Hz, Sensors, Digital
See page 18 for replacement IR bulb light
5pectratherm 340050 & 400050
Spectratek Infrared curing lamp
Short Wave IR Curing System reduces curing time of
organic solvent based paint products and drying time of
water based products. This technology is dramatically
less expensive to operate with better results and saves
energy because drying can be focused on repaired a rea,
not the entire vehicule.
No. Reference SPECTRATHERM 3400
Spectratherm 3400, 3400W, 240V 1 Phase, Sensors, Digital
28.SPT3400SD
@ ·us CE
c
No. Reference SPECTRATHERM 4000
Spectratherm 4000, 4000W, 240V 1 Phase, Sensors, Digital
Spectrathenm 4000, BOOOW, 240V 1 Phase, High output
Spectratherm 4000, 4000W, 380V 3-Phase, Sen sors, Digital
28.SPT4000SD
28.SPT4000DHO
28.SPT4004SD
See page 18 for replacement IR bulb light
Curing times reduced to less than 5 minutes .
Acoustic and optical measuring of distances.
Fully temperature controlled from start to finish .
Thermal Integrated Sensor System (TISS) .
Flexible settings possible.
Efficient Lamp Units
Lamp array are ali positionned for absolutely uniform heat distribution
over the larges! curing area.
The unique reflectors thal envelop the lamps are specifically designed to
direct ali the energy from the lamps towards the vehicle.
Digital control optional.
39"(1m)
Spectratherm 3400 Power consumption: 3400W
Spectratherm 4000 Power consumption: 4000W
Thermallntegrated
Sensor System (TISS)
Helps to position the curing unit
for optimum heating with an
ultrasonic senso~
Optical sensor and electronics
regulate the heating
temperature based on
the panel temperature desired.
Digital Control and Display
• Easy to use;
• Display different cycles setup;
• Display of the ramptime, curetime and
temperature of each cycle;
• Option selection, as language or
umts of measuremen t;
>ENGLISH
CELCIUS
CENTIMETRES
DISTRNCE OFF
• System memory;
CYCLE # 01
00
00
50
f'lin
f'lin
c
Nb CYCLES: 01
Spectratherm 800050
Spectratek Infrared curing lamp
Double head.
Acoustic and optical measuring of distances.
Temperature sensor.
Flexible settings possible. Easily moveable stand and effortless
lamp unit adjustment, enable even the most inaccessible
panels to be cured efficiently.
Digital control optional.
Power consumption:
sooow
EFFORTLESS LAMP
UNIT ADJUSTMENT
A gas cylinder locking allows an
easy and effortless adjustment
of the lamp unit.
Replacement lnfrared Bulb Lights
EFFICIENT LAMP UNITS
The high-temperature halogen lamps,unique reflector and lamp array
are ali positioned for absolutely uniform heat distribution over the
larges! cu ring area. ln addition, individual lamps can be angled to
more closely match the contours of the vehicle.
850W IR bulb light (for model 3400SD)
17.200.00.19 - IR bulb light 850W (200·240VI
79"(2m)
'
-
""
c§J
No. Reference
2B.SPTBOOOSD
2B.SPTB002SD
2B.SPTB003SD
2B.SPTB004SD
1 OOOW IR bulb light (for models 1000, 4000SD & 8000SD)
17.200.00.24 - IR bulb light 1000W (110V)
17.200.00.30 - IR bulb light 1000W (200·240V)
17.200.00.22 -IR bulb light 1000W (3BOV)
®
[email protected]·
c
us
Spectralherm BODO, BOOOW, 240V 1 Phase, Sensors, Digital
Spectratherm BODO, BOOOW, 220V 3-Phase, Sensors, Digital
Spectratherm BODO, BOOOW, 3BOV 3-Phase, Sensors, Digital
Spectratherm BODO, BOOOW, 3BOV 3-Phase, 4 wires, Sensors, Digital
1200W IR bulb light (for models 1200 & 2400)
17.200.00.25 -IR bulb light 1200W (100-120V)
17.200.00.50 - IR bulb light 1200W (200·240V)
;;iiiiiiiiiii...... .
:EFFICIENT LAMP UNITS
1
The high-temperature halogen
lamps,unique reflector and lamp array
are ali positioned for absolutely uniform heat
distribution over the larges! curing area . ln addition ,
indiv iduallamps can be angled to more closel y
nA
match the contours of the vehicle .
,,1, 1
1
'l'1
spectral10llhl
79"(2m) SkW & 16kW models
1:
Spectratherm TM
Overhead Track System
The SpectrathermTM Overhead Track System was specifically
designed to maximize vehicle throughput. Utilizing the Short
Wave Infra-Red curing process it combines: lamps,unique
reflectors, lamp array, and Thermal lntegrated Sensor System
(TISS) to significantly reduce standard curing and drying times.
The Short Wave Infra-Red curing heads are suspended from
an overhead track system , freeing up valuable floor space.
An easy glide bridge assembly makes positioning the curing
heads, on any panel of a vehicle, effortless. There is no need to
maneuver portable floor systems between tightly spaced
vehicles, eliminating any fear of vehicle damage.
C/)
Qj
"C
0
E
~
co
Ê
~
ên
M
For optimum performance lamp heads should be left in the closed position
(as illustrated above).
The innovative track design and its cable carrier allow the track
system to span multiple bays, no more electric cables dragging
along or cluttering up the floor. Various options are available,
floor mount, ceiling mount or a combination of both.
Available models:
Track System
The unique reflectors
that envelop the
lamps are
specifically
designedto
direct ali the
energy from the
lamps towards the
vehicle.
Digital Control Box, is independent,
and can be positionned on a nearby w all ,
column , or be free standing .
Spectratherm™4000TS
Spectratherm™8000TS
SpectrathermTM 16000TS
SpectrathermTM 32000TS
No. Reference
28.SPT4004TSD
28.SPTBOOOTS
28.SPTBOOOTSD
28.SPT8003TS
28.SPT8003TSD
28.SPT8004TS
28.SPT32000TS
[email protected]·
c
us
Track System, BOOOW, 380V 3-Phase, Digital
Track System, BOOOW, 240V 3-Phase
Track System, BOOOW, 240V 3-Phase, Digital
Track System, BOOOW, 380V 3-Phase
Track System, BOOOW, 380V 3-Phase, Digital
Track System, BOOOW, 380V 3-Phase, 4 wires
Track System, 32000W, 380V 3-Phase
*Cali us to orcier or for more informations
SPECTRA-JET
Air diffuser for waterborne basecoats
Tried and Tested Performance.
Light Yet Robust Adjustable Stand.
Easy Head Positioning.
Patent (pending) Design.
Air diffuser specifically designed to rapidly dry the waterborne
basecoats that are now being used in the automotive
refinish industry.
Multiple positions to suit your drying needs.
This equipment harnesses the venturi principle resulting in a
large volume of filtered spray- booth air being pushed across
the painted panels .
Dry times as short as 5 minutes can be achieved .
Example at low pressure:
14psi (lBAR) = 10.1CFM (IN) 78.6 (OUT)
Recommended working pressure range:
1 to 4 BAR (14-60psi).
Maximum height: 2.1m (6.8ft.)
Hand-held Spectra-Jet
Portable air diffuser for
waterborne paint product
No. Reference
28.SPT0500
28.SPT. 0250
28.SPT0260
CE
Double air dryer on support
Hand-held air dryer
Hand-held air dryer wilh trigger
Hand Expander
Truck Expander
The revolutionary tool that lets you replace only
worn-out sections of an exhaust pipe .
The ideal tool for replacing exhaust
systems economically and efficiently.
Fast (does the job in 15 seconds max.) .
Quick and accurate expansion
(approximately 15 seconds at most) .
Eliminates need for welding .
Portable and easy ta handle.
Expansions range:
1-1/2" through 3-1/2"
I.O. and 0.0.
Expansion capacity:
from 3" I.O. to 6-1/8" 0.0.
Required air pressure:
60 to 120 lb/sq.in. (psi)
Required air pressure:
60 to 120 lb/sq.in. (psi)
Accuracy:
Controlled to .005"
Accuracy:
Controlled to .005"
No. Reference
41.100.01 .01
41.100.01 .015
41 .100.01 .04
No. Reference
Hand expander with 6 segments
Hand expander with 7 segments
41.100.01 .06
Il
@·
c
us
CE
Bender 133MSA
Two-way expander with gripper clamp for maximum versatility.
Design provides swaging and Hydra-Sizing expansion
in a single unit.
Rugged steel frame and finest quality hydraulics and electrics
provide years of trouble free service .
Motor or pump: 5-hp 3gpm; single or three phase.
Export: 50Hz, 3-phase avail.
Bending capacity: 3/4"- 3" (19mm- 76.2mm).
Swaging capacity: 3/4"- 3" (19mm- 76.2mm).
Hydra-Sizer capacity: 1-1/4"- 3" (31.8mm- 76.2mm).
No. Reference
28.100.00.10
28.100.00.15
@·
c
us
CE
Bender 153MSA
Top-of-the-li ne tube bender designed for high-volume
and high-profit operation .
Equipped with two expanders : the Hydra-sizer and the Gripper
clamp swager. This dual expander feature allows two different
expanding set-ups without changing tooling .
Rugged steel frame and finest quality hydraulics and electrics
provide years of trouble free service .
Motor or pump: 5-hp 3gpm; single or three phase.
Export: 50Hz, 3-phase avail.
Bending capacity: 3/4"- 3" (19mm- 76.2mm) .
Swaging capacity: 3/4"- 3" (19mm- 76.2mm).
Hydra-Sizer capacity: 1-1/4"- 6 " (31.8mm- 152.4mm).
No. Reference
Pipe bender 133MSA, 1 Phase
Pipe bender 133MSA, 3·Phase
28.100.00.05
28.100.00.20
Pipe bender 153MSA, 1 Phase
Pipe bender 153MSA, 3·Phase
Item
1
4
5
8
9
10
11
12
13
No. Reference
Description
16.176.00.05
16.176.00.10
16.176.00.15
16.176.01.05
16.176.01 .10
16.176.01.15
16.176.02.10
16.176.02.15
16.176.11.01
16.176.11 .02
16.176.12.05
16.176.12.15
16.176.40.05
16.176.40.10
16.176.41 .05
16.176.41.10
16.176.42.05
16.176.42.10
15.900.00.05
16.178.00.85
03.700.00.05
03.800.00.10
05.202.04.10
05.202.04.15
05.202.04.20
02.205.03.55
04.204.90.15
02.205.03.15
Welding steel wire: .023, 21bs (0.9kg)
Welding steel wire: .023, 111bs (5kg)
Welding steel wire: .024, 441bs (20kg)
Welding steel wire: .030, 21bs (0.9kg)
Welding steel wire: .030, 101bs (4.5kg)
Welding steel wire: .030, 441bs (20kg)
Welding steel wire: .035, 101bs (4.5kg)
Welding steel wire: .035, 441bs (20kg)
Welding aluminium wire: .030, 11b (0.5kg)
Welding aluminium wire: .030, 11b (0.5kg)
Welding aluminium wire: .024, 11b (0.5kg)
Spool aluminium wire: .035, 1Olbs (4.5kg)
Welding bronze wire: .024, 21bs (0.9kg)
Welding bronze wire: .024, 101bs (4.5kg)
Welding bronze wire: .030, 21bs (0.9kg)
Welding bronze wire: .030, 101bs (4.5kg)
Welding bronze wire: .035, 21bs (0.9kg)
Welding bronze wire: .035, 101bs (4.5kg)
Drive rollers ass~
Clip with feil
Mig gun MB26
Mig gun MB15
Conical nozzle MB26
C~lindrical nozzle MB26
Spot nozzle MB26
Swan neck MB26
Tip holder MB26
Head insulator MB26
Item
No. Reference
Description
15
16
17
18
19
20
21
22
18.115.00.10
18.115.00.15
05.202.01 .05
05.202.01 .10
05.202.01 .15
05.202.01 .20
02.205.01 .86
04.204.90.05G
02.205.01 .25
02.205.01 .20
Grou nd clamp 200AMPS
Ground clamp 350AMPS
Conical nozzle MB15
Cylindrical nozzle MB15
Spot nozzle MB15
Stud weld nozzle MB15
Swan neck MB15
Tip & nozzle MB15
Nozzle spring MB15
Head insulator MB15
24
25
26
06.206.00.20
02.205.08.40
06.206.00.10
Teflon liner .024, .030, .035
Brass tube for teflon
Steel liner MB14 .024, .030, .035
28
16.178.00.30
16.178.00.35
18.114.00.35
18.114.00.30
02.205.08.55
02.205.08.56
02.800.00.05
09.125.05.25
16.178.00.40
03.700.00.45
04.204.71.01
04.204.73.01
Welding helmet
Auto-darkening welding helmet
Quick coupler male
Quick coupler female
Guide tube 211/16"
Guide tube 2 718"
Gun adaptor (Euro)
Gun adaptor plastic only (Euro)
Gas regulator argon • C02
Spool gun
Welding tip .030
Welding tip .040
14
29
30
31
32
33
34
35
36
Compuspot 160
13.PS.10.27
Mandrel for na il
04.PS.15.05
Washer tip
16.178.00.67
Nails (Pkt 100)
13.PS.10.31
Hook ma nd rel for nails pulling
04.PS.15.15
Half moon tip
(stich and wiggle wire) ,...._ _ _!OftJk
13.PS.10.45
Grou nd plate holder
04.PS.15.18
Single spot tip
16.178.00.72
Washer (Pkt 100)
~--~~ ··---
13.155.00.36
Stars (Pkt 10)
--- ~--- ~
04.PS.15.20
Molding clip tip
.... .
.
A VAVAT
,1"0 --- J· ~
~
04.PS.15.25
Long stud tip (nails)
-
13.155.10.45
5 Finger bear claw
13.155.10.50
8 Finger bear claw
16.178.00.77
M6 stud (Pkt 30)
~---·--..·.,....,,
·~·-........ "'~
~
--~
--
-
04.PS.15.30
Wiggle wire tip
04.PS.20.36
Adapter holder
for carbon rod
02.205.01.60
Carbon rod
' -.........~-· ·- . ··-·""""t'!"'-.. . . . .- -.
13.PS.10.23
Energie si ide hammer with adaptor
13.155.10.78
Wiggle wire (Pkt 1/21b)
13.155.10.76
Wiggle wire (Pkt 11b)
16.178.00.79
M6 nut (Pkt 30)
~
~
....,
13.155.10.55
Handle for bear claw
Compuspot 180AL
1
·••111!~·····~-
Hand
lifter ~
13.155.30.05·
.c
Compuspo t 325 to 900
04.PS20 0~
Standard t1p
04.PS.15.15.
Fan shape tlp
04.PS.20.10
Rivet tip
04.PS.15.30 .
Wiggle wire tlp
04 PS.18.04
Stud holder 4mm
04 PS 18.05
Stud Îlolder Smm
04.PS.20.15
Nail tip
04 PS.18.06
Stud holder 6mm
16.178.01.24
Threaded
pu Il"mg studs M4x15 (Pkt 200)
04.PS.20.20
washer tip
16.178.01 .25
Threaded
pu ll"ng
1 studs M5x15 (Pkt 200)
16.178.01.26
Threaded
pu Il"mg studs. M6x15 (Pkt 200)
04.PS.20.25 .
Gutter rail tlp
08 175.00.54
Pu lier mandrel4mm
08 175.00.55
m
Pu lier mandrel Sm
08 175.00.56
Pu lier mandrel 6mm
04.PS.20.30.
Shrinking t1p
Ill
04.PS.20.3_1
M6 Stud t1p
16.178.00.18
Safety goggles
04.PS.20.32
M6 Nut tip
13.155.00.36
AVA VA.V'
13.155.10.45
5 Finger bear claw
13155.10.50
8 Finger bear claw
~
13.155.10_76 (16 GA Pkt 11b)
Wigglew1re
13.15510_77(16 GA Pkt 5 LBS)
Wigglew1re
16 250.00.10
St~inless steel brush
04.PS.20.33
Adapter
02.205.01.60
Carbon rod
8
13.155.10_7 (16 GA Pkt 1/21b)
Wigglew1re
~
13 PS.10.45
Giou nd plate holder
Compuspot 325 to 850
04.PS.20.83
04.PS.80.12
13.PS.11.05
Tip sharpener
120mm Straight arms kit
Fender electrode (G Clamp)
16.178.00.67
Na ils (Pkt 100)
04.PS.80.33
330mm 1/2 Offset arms kit
13.PS.11.64
500mm U arm (G Clamp)
04.PS.80.32
16.178.00.71
Rivets (Pkt 100)
330mm
1/2 Offset arm
13.PS.11.60
100mm Offset arm
(G Clamp)
04.PS.80.34
330mm Dog
noze arms kit
16.178.00.72
Washer (Pkt 100)
13.PS.11.55
G to C Adapter
(G Clamp)
16.178.00.77
M6 stud (Pkt 30)
04.PS.80.21
230mm Crocodile
type arms kit
09.125.05.52
Accessories & consumables storing case
Accessories & consumables not included
04.PS.80.41
16.178.00.79
M6 nul (Pkt 30)
470mm Full offset
arms kit
_c.
_j -
.1
13.PS.10.27
Mandrel for na il
04.PS.80.22
Fender electrode kit
Compuspot 325 to 850
13.PS.10.96
C Clamp 180daN
(air coolling)
~=-o;;;~
04.PS.70.15
150mm Straight electrodes
04.PS.70.16
150mm Angled electrodes
04.PS.70.17
160mm Fender electrodes
13.PS.10.86
G Clamp 160daN
(air cooling)
13.PS.10.61
254mm arm
13.PS.10.62
380mm arm
13.PS.10.63
610mm arm
04.PS.70.20
200mm Flat electrodes
13.PS.10.64
G Clamp adapter
04.PS.70.24
240mm Straight
electrodes
04.PS.70.25
250mm Angled
electrodes
13.PS.10.65
508mm arm
04.PS.70.38
380mm Offset
electrodes
04.PS.38.15
Offset electrode
04.PS.70.39
380mm Offset
electrodes (2)
--
...-:-~
..
Compuspot 900 FUSION
04.PS.20.83
04.PS.80.12S
Tip sharpener
120mm Straight arms set
04.PS.80.22S
Fender eclectrodes set
16.178.00.67
Na ils (Pkt 100)
for G clamp 490daN
04.PS.90.12S
16.178.00.71
120mm Straight arms set
Rivets (Pkt 100)
-~
04.PS.90.10S
16.178.00.72
Fender electrode set
Washer (Pkt 100)
04.PS.80.34S
330mm Dog noze arms set
04.PS.90.30S
300mm U arm
04.PS.80.47S
470mm Straight arms set
04.PS.90.40S
400mm U arm
04.PS.80.21 S
230mm Crocodile type arms set
13.PS.10.27
Mandrel for na il
04.PS.90.50S
500mm U arm
09.125.05.52
04.PS.80.41 S
Accessories & consumables storing case
470mm Full Offset arms set
Accessories & consumables not included
0
AMH presents one of the broadest li nes of bending,
end forming and special accessories in the industry.
Ali tooling is manufactured from high grade, solid
steel which is heat treated and ground for superior
performance.
4-Three Quarter Shoes *
No. Reference
2" (51 mm)
2-114" (57mm)
35TS200
35TS214
0
In addition to catalogued items, AMH has the ability
to design and produce special tooling to meet
virtually any requirement.
1-Ram Dies*
No. Reference
3535R112
3535R134
3535R200
354R178
354R200
354R214
355R200
355R212
355R214
355R234
355R300
R3.5" x 1-112" (R89mm x 38mm)
R3.5" x 1-314" (R89mm x 44.5mm)
R3.5" x 2" (R89mm x 51 mm)
R4" x 1-1178" (R102mm x48mm)
R4" x 2" (R102mm x 51 mm)
R4" x 2-114" (R102mm x 57mm)
R5" x 2" (R127mm x 51 mm)
R5" x 2-112" (R127 x 63mm)
R5" x 2-114" (R127mm x 57mm)
R5" x 2-314" (R127 x 70mm)
R5" x 3" (R127mm x 76mm)
5-Ram Die Pin Clip
No. Reference
35RDPI
Ram die pin clip
6-Die Pusher
No. Reference
35DP100
Die pusher 1" (25.4mm)
7-Die Pusher Spring
No. Reference
35DP150
2-Back Shoes*
8-Retractor Bar
No. Reference
1-112" (38mm)
1-314" (44.5mm)
1-718" (47.6mm)
2" (51mm)
2-1 12" (63mm)
2-114" (57mm)
2-314" (70mm)
3" (76mm)
3-1 12" (89mm)
35BS112
35BS134
35BS178
35BS200
35BS212
35BS214
35BS234
35BS300
35BS312
3-Half Shoes *
No. Reference
35HS112
35HS134
35HS178
35HS200
35HS212
35HS214
35HS234
35HS300
Die pusher spring (9-1208-21)
1-112" (38mm)
1-314" (44.5mm)
1-718" (48mm)
2" (51 mm)
2-1 12" (63mm)
2-1 14" (57mm)
2-314" (70mm)
3" (76mm)
No. Reference
35RB100
Retracter bar
0
1
*The tools listed above are the most common tools manufactured. Cali us to get more information about other tools
9-Ba/1 Joint Segment Set*
12-Ba/1 Male Expander Die
No. Reference
No. Reference
Bali joint segment set 1-314" (44.5mm)
Bali joint segment set 2" (51 mm)
Bali joint segment set 2-112" (63.5mm)
Bali joint segment set 2-114" (57mm)
Bali joint segment set 2-314" (70mm)
Bali joint segment set 3" (76mm)
Bali joint kit 2", 2-114", 2 112" (51mm, 57mm, 63.5mm)
33BSS134
33BSS200
33BSS212
33BSS214
33BSS234
33BSS300
36HE03
0
34BMED112
34BMED134
34BMED178
34BMED200
34BMED212
34BMED214
34BMED238
34BMED300
34QBMED134
34QBMED200
34QBMED212
34QBMED214
Bali male expander die 1" (25.4mm)
Bali male expander die 1-314" (44.5mm)
Bali male expander die 1-718" (47.6mm)
Bali male expander die 2" (50.8mm)
Bali male expander die 2-112" (63.5mm)
Bali male expander die 2-114" (57mm)
Bali male expander die 2-318" (35mm)
Bali male expander die 3" (76.2mm)
Quick Bali male expander die 1-314" (44.5mm)
Quick Bali male expander die 2" (SO.Bmm)
Quick Bali male expander die 2-112" (63.5mm)
1 O-F/are Segment Set*
No. Reference
33FSS1 12
33FSS134-214
33FSS200-212
33FSS300
33FSS400
36HE02
Flare segment set 1-112" (38mm)
Flare segment set 1-314", 2-114" (44.5mm, 57mm)
Flare segment set 2", 2-112" (51 mm, 63.5mm)
FIare segment set 3" (76mm)
Flare segment set 4" (102mm)
13-Ba/1 Female Expander Die
No. Reference
34BFED134-200
34BFED134-212
34BFED234-300
34QBFED300
34QBFED312
34QBFED400
Bali female expander die 1-314" to 2" (44.5 to 50.8mm)
Bali female expander die 1-314" to 2-112" (44.5 to 63.5mm)
Bali female expander die 2-314" to 3" (70 to 76.2mm)
Bali female expander die 3" Quick attach (76.2mm)
Bali female expander die 3-112" Quick attach (89mm)
Bali female expander die 4" Quick attach (101 .6mm)
Bali female expander die 5" Quick attach (127mm)
11-Gripper Adapter Col/ar*
No. Reference
34GAC34
34GAC100
34GAC112
34GAC1 14
34GAC118
34GAC12
34GAC134
34GAC138
34GAC158
34GAC178
34GAC200
34GAC212
34GAC214
34GAC218
34GAC234
34GAC238
34GAC300
Gripper adapter collar 314" (19mm)
Gripper adapter collar 1" (25.4mm)
Gripper adapter collar 1-1 12" (38.1mm)
Gripper adapter collar 1-114" (31.2mm)
Gripper adapter collar 1-1 18" (28.6mm)
Gripper adapter collar 112" (12.7mm)
Gripper adapter collar 1-314" (44.5mm)
Gripper adapter collar 1-318" (35mm)
Gripper adapter collar 1-518" (41 .3mm)
Gripper adapter collar 1-718" (47.6mm)
Gripper adapter collar 2" (50.8mm)
Gripper adapter collar 2-112" (63.5mm)
Gripper adapter collar 2-114" (57mm)
Gripper adapter collar 2-118" (54mm)
Gripper adapter collar 2-314" (70mm)
Gripper adapter collar 2-318" (60.3mm)
Gripper adapter collar 3" (76.2mm)
14-S/ip Segment Set*
No. Reference
33SSS112
33SSS114
33SSS134
33SSS200
33SSS212
33SSS214
33SSS234
33SSS300
33SSS312
33SSS400
33SSS412
33SSS500
33SSS512
33SSS600
Slip segment set 1-112" (38mm)
Slip segment set 1-114" (32mm)
Slip segment set 1-314" (44.5mm)
Slip segment set 2" (51 mm)
Slip segment set 2-112" (63.5mm)
Slip segment set 2-114" (57mm)
Slip segment set 2-314" (70mm)
Slip segment set 3" (76mm)
Slip segment set 3-112" (89mm)
Slip segment set 4" (10 1.6mm)
Slip segment set 4-112" (114mm)
Slip segment set 5" (127mm)
Slip segment set 5-112" (140mm)
Slip segment set 6" (152.4mm)
*The tools listed above are the most common tools manufactured. Cali us to get more information about other tools
15-Expander Die*
17-Doming Die*
No. Reference
No. Reference
34E012
34E034
34E0100
34E0112
34E0114
34E0118
34E0134
34E0138
34E0158
34E0178
34E0200
34E0212
34E0214
34E0218
34E0234
34E0238
34E0300
38ST1-14
Expanderdie 112" (12.7mm)
Expander die 314" (19mm)
Expander die 1" (25.4mm)
Expanderdie 1-112" (38.1mm)
Expander die 1-1 14" (31.2mm)
Expander die 1-1 18" (28.6mm)
Expander die 1-314" (44.5mm)
Expander die 1-318" (35mm)
Expanderdie 1-518" (41.3mm)
Expander die 1-718" (47.6mm)
Expander die 2" (50.8mm)
Expander die 2-112" (63.5mm)
Expander die 2-114" (57.2mm)
Expander die 2-118" (54mm)
Expander die 2-314" (69.9mm)
Expander die 2-318" (60.3mm)
Expander die 3" (76.2mm)
Threaded stud 1-14NS X 2112
Ooming die 1-314" to 2-1 12" (44.5 to 63.5mm)
Ooming die 3" (76.2mm)
Ooming die 3-112" (88.9mm)
Ooming die 4" (10 1.6mm)
3400134-212
3400300
3400312
3400400
18-Reducing Tool*
No. Reference
Reducing tool1" (25.4mm)
Reducing tool1-1 12" (38.1mm)
Reducing tool1-1 14" (3 1.2mm)
Reducing tool1-3/4" (44.5mm)
Reducing tool1-318" (34.5mm)
Reducing tool1-518" (41.3mm)
Reducing tool1-718" (47.6mm)
Reducing tool 2" (50.8mm)
Reducing tool2-1 12" (63.5mm)
Reducing tool2-1 14" (57.2mm)
Reducing tool2-3/4" (69.9mm)
Reducing tool 3" (76.2mm)
34RT100
34RT112
34RT114
34RT134
34RT138
34RT158
34RT178
34RT200
34RT212
34RT214
34RT234
34RT300
Quick Expander dies
Standard Expander dies
34QE0100
34QE0112
34QE0114
34QE0134
34QE0138
34QE0158
34QE0178
34QE0200
34QE0212
34QE0214
34QE0234
34QE0300
34QE0300S
34QE0312S
34QE0400S
34QE0500S
Quick expander die 1" (25.4mm)
Quick expander die 1-112" (38.1mm)
Quick expander die 1-114" (31.2mm)
Quick expander die 1-314" (44.5mm)
Quick expander die 1-318" (35mm)
Quick expander die 1-518" (41.3mm)
Quick expander die 1-718" (47.6mm)
Quick expander die 2" (50.8mm)
Quick expander die 2-112" (63.5mm)
Quick expander die 2-114" (57.2mm)
Quick expander die 2-314" (69.9mm)
Quick expander die 3" (76.2mml
Expander die 3" Quick attach (76.2mm)
Expander die 3-112" Quick attach (88.9mm)
Expander die 4" Quick attach (101.6mm)
Expander die 5" Quick attach (127mm)
16-Head Pipe Flanging Tool
No. Reference
34HPF1
19-Segment Set "0" Rings*
No. Reference
370RHE01
370RHE02
370RHE03
370RHE112
370RHE212
370RHE300
370RHE312
370RHE400
370RHE412
370RHE500
370RHE600
O'Ring set including 12x OR119, OR122, OR128 and OR132
O'Ring set including 6x OR223 and OR225
O'Ring set of 1-112" to 3" (38 to 76mm)
O'Ring set for Segment 1-112" (38mm)
O'Ring set for Segment 2-112" (63.5mm)
O'Ring set for Segment 3" (76mm)
O'Ring set for Segment 3-112" (89mm)
O'Ring set for Segment 4" (102mm)
Head pipe flanging tool
* The tools listed above are the most common tools manufactured. Cali us to get more information about other tools
20-Inner Segment Set
25- Tube Notcher
No. Reference
331SS134
331SS200
331SS212
331SS214
No. Reference
lnner segment set 1-314" (44.5mm)
lnner segment set 2" (50.8mm)
lnner segment set 2-1 12" (63.5mm)
lnner segment set 2-1 14" (57.2mm)
38TNI
38TNII
Tube notcher 1-112" to 2-112" (38. 1mm to 63.5mm)
Tube notcher 4", 5" and 6" (1 02mm, 127mm and 152mm)
22-Hand Sizing Tool
No. Reference
Hand sizing tool
38HSTI
23-Micro-Dia/ Arbor
No. Reference
33HSA114
33HSA2
41.100.01.40
Red ucing tool1-1 14" (31 .2mm)
Reducing tool 2" (50.8mm)
Arbor Hand Expander
24- Tube Cutter
No. Reference
38TC30
Tube cutler No30
*The tools listed above are the most common tools manufactured. Cali us to get more information about other tools
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement