advertisement
Features
• 12" coaxial loudspeaker with 40-18,000Hz response
• 250Wrms (AES standard) power handling and 97dB sensitivity
• 2.5" high temperature copper voice coil wound on polyimide for increased reliability
• Robust and reliable pressed steel frame ferrite magnet LF driver
• Compact, lightweight neodymium compression driver - 80º nominal coverage
Frequency Response and Impedance Curves
TF1225CX
Coaxial, pressed steel chassis driver
General Specifications: LF
Nominal diameter . . . . . . . . . . . . . . . . . . . . . . 305mm/12in
Power rating 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 250Wrms
Nominal impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Ω
Sensitivity 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97dB
Frequency range . . . . . . . . . . . . . . . . . . . . . . . . 40-4000Hz
Voice coil diameter . . . . . . . . . . . . . . . . . . . . . 64mm/2.5in
Chassis type. . . . . . . . . . . . . . . . . . . . . . . . . . Pressed steel
Magnet type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ferrite
Magnet weight . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2kg/42oz
Coil material . . . . . . . . . . . . . . . . . . . . . . . . . Round copper
Former material . . . . . . . . . . . . . . . . . . . . . . . . . . Polyimide
Cone material . . . . . . . . . . . . . . . . . . . Kevlar loaded paper
Surround material . . . . . . . . . . . . . . . . . . . . . Cloth-sealed
Suspension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single
Xmax 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5mm/0.098in
Gap depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8mm/0.31in
Voice coil winding width. . . . . . . . . . . . . . . . . 13mm/0.51in
Small Signal Parameters
D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.26m/0.24in
Fs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71.4Hz
Mms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49.68g/1.75oz
Mmd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42.76g/1.51oz
Qms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.824
Qes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.480
Qts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.426
Re . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.57
Ω
Vas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39.91lt/1.41ft
3
BI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.08Tm
Cms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.10mm/N
Rms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.83kg/s
Le (at 1kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.23mH
General Specifications: HF
Power rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Wrms
Nominal impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Ω
Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110dB
Frequency range. . . . . . . . . . . . . . . . . . . . . 1200-18,000Hz
Recommended min. crossover (12dB/oct) . . . . . . . . 2200Hz
Voice coil diameter . . . . . . . . . . . . . . . . . . . . 45mm/1.75in
Magnet type . . . . . . . . . . . . . . . . . . . . . . . . . . . Neodymium
Diaphragm and surround material . . . . . . . . . . . . PETP film
Mounting Information
Overall diameter . . . . . . . . . . . . . . . . . . . . . 309mm/12.2in
Overall depth . . . . . . . . . . . . . . . . . . . . . . . . 172mm/6.77in
Cut-out diameter . . . . . . . . . . . . . . . . . . . . 283mm/11.14in
Mounting slot dimensions . . . . . . . . . . . . . . . . ø 7.9mm/0.31in
Number of mounting slots. . . . . . . . . . . . . . . . . . . . . . . . . 4
Mounting PCD range . . . . . . . . . . . . . . . . . 297mm/11.69in
Unit weight . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6kg/10.1lb
1. Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
2. Measured on axis at 1W, 1m in 2 π anechoic environment.
3. Xmax derived from: (voice coil winding width-gap depth)/2.
PAGE 101
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project