AtlasIED TSD DCPDV DC Power Distribution Owner's Manual
Below you will find brief information for DC Power Distribution TSD DCPDV. The TSD-DCPDV is a compact device that provides DC power distribution with fixed and variable outputs. It has one 24VDC input, four fixed 24VDC outputs, two 5VDC USB charge ports, and two regulated variable outputs ranging from 5V to 24VDC. This makes it ideal for various audio applications, such as powering multiple TSDs from a single power supply, reducing AC outlets from power strips, and using less power.
Advertisement
Advertisement
Owner’s Manual
TSD-DCPDV
DC Power Distribution
TSD-DCPDV
DC Power Distribution with
Fixed & Variable Outputs
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
Description
TSD-DCPDV
DC Power Distribution
Owner’s Manual
The AtlasIED TSD-DCPDV Variable DC Power Distribution Block is designed to reduce cost and wiring clutter in installations where multiple DC power supplies with the same voltage are required.
Each unit has one 24VDC Input, 4 fixed 24VDC Outputs, 2 5VDC USB Charge Ports and 2 regulated variable outputs ranging from 5V - 24VDC. Each output has additional filtering to negate any AC ripple that may be present in the DC signal. Both USB and Variable outputs have a current overdrive protection circuit. The current output also depends on the power supply current rating.
The TSD-DCPDV is part of a full line of AtlasIED Time Saving Devices. These compact
(1.5" x 4" x 2.75") units are designed to solve some of the common audio system problems in the easiest and in the most efficient and cost-effective way. All models are made from high quality components and include removable individual I/O connectors for quick and precise wiring, separate ground terminals for all I/Os assuring secured connections, and removable level controls that can be replaced with tamper-proof security covers. The TSDs are highly efficient and meet Energy Star™ standards as one 24V DC power supply (available separately) can power multiple Atlas Time Saving
Devices.
Features
• Power Distribution for Multiple TSDs
From a Single PSU
• 1 In 8 Out Configuration
• Four (4) Fixed 24VDC Outputs
• Two (2) Variable 5V - 24VDC Outputs
• Two (2) USB 5VDC Charge Ports
• Current Operating Range 1A to 3A
• DC Filtering Per Channel
• DC Isolation Per Channel
• Cable Management System
• Multiple Mounting Configurations
• Separate Ground Connections
• Removable Phoenix Style I/O Connectors
• Meets Energy Star™ Standards
• Compact Chassis Design
Audio Applications
• Wireless Microphone Power Supplies
• TSD Power Distribution
• Reduce AC Outlets from Power Strips
• Use Less Power
Installation
• Government Buildings
• Medical Facilities
• Office Environments
• Churches
• Restaurants
• Schools
• Industrial Facilities
• House of Worship
AtlasIED.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 2 –
Specifications are subject to change without notice.
Owner’s Manual
Front Panel Description
TSD-DCPDV
DC Power Distribution
2
1
1. USB Charge Ports - Connect USB devices to these 2 ports. Maximum current draw from each port
is 500mA at 5VDC. Note: These ports will not charge iPhones.
2. Power LED - Illuminates BLUE when 5-24VDC power is present.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
TSD-DCPDV
DC Power Distribution
Rear Panel Description
5
Owner’s Manual
5
5 5
1 2 3 4
TSD Input/Output connections are removable for easy system wiring. The connector has a 3.5mm pitch between pins.
1. DC Power Input - Each TSD that requires DC power comes with a 2 position connector for
an external 24VDC power supply (sold separately). Because of the TSD’s low power consumption,
a single external power supply may power more than one TSD. Please refer to the specifications
on current requirements in milliamps to match with the appropriate power supply. Note: It is
acceptable to exceed the current requirements of the TSDs but NOT safe to use a power supply
that is below the current requirement of the device.
2. Isolated DC Outputs - Connect all system TSD products to these outputs, ensuring the total current
draw of all the connected devices does not exceed the supply current of the TSD power supply
being used. Observe the polarity of the output connectors and the polarity of the TSD devices
being connected as well. Each output is filtered and isolated.
3. Variable DC Voltage Control - Rotate clockwise to increase the voltage at the 2 variable output
voltage connectors. Rotate counterclockwise to decrease. A meter should be used to measure
the DC voltage at the output terminals. Adjustment range is 5-24VDC when a 24VDC power supply
is connected to the 24VDC Input.
4. Variable Output Voltage Connectors - Connect devices to these two outputs that require a voltage
other than fixed 24VDC. Observe the polarity at the connectors. Maximum current output is 500mA
at each port.
5. Cable Management Retainer Points - Each TSD includes two cable retainer straps for securing
the included cable management retainers. Remove one of the rear panel screws, align the
panel hole with a retainer and firmly tighten the screws.
AtlasIED.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 4 –
Specifications are subject to change without notice.
Owner’s Manual
Cable Management
TSD-DCPDV
DC Power Distribution
Knob and Security Cover
All front panel level controls feature a removable knob that can be replaced with an included security cover. Follow these steps to prevent potentiometer damage or unwanted changes.
1. Knob Installation - Turn the potentiometer shaft fully counter-clockwise. Align the knob indicator
to the lowest setting on the panel and the potentiometer shaft slot. Carefully press the knob onto
the potentiometer shaft. Do not force or damage may occur to the potentiometer.
2. Security Cover Installation - Remove the knob from the panel and insert the cover. Small pliers may
be required to remove the knobs. Align the security cover to the level control panel hole. Push the
cover into the hole until it snaps into place. Do not force or damage may occur to the potentiometer.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
TSD-DCPDV
DC Power Distribution
Owner’s Manual
Mounting
Listed below are the ways to mount the TSD and the optional accessories that can be purchased.
1. Velcro™ - Each unit includes two 2" x 2" pieces of industrial-grade Velcro™ with adhesive backing
to adhere to any flat surface. Clean all surfaces before applying the adhesive side of the Velcro™.
2. Multi Mount Plate - Each TSD includes a versatile multi-position mounting plate. This plate
allows the TSD to be mounted to any surface; but is ideal for use with rear rack rails or side rack
hat channels. Use the included M3 x 4mm screws to install the plate on the TSD. Note: Only use
the included M3 x 4mm screws as other screws may be too long and will cause internal damage
to the TSD. The multi-position mounting plate is a new addition being included with TSDs. If the
TSD being used did not include the mounting plate, contact AtlasIED customer service at
1-800-876-3333.
(M3 x 4mm)
(M3 x 4mm)
AtlasIED.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 6 –
Specifications are subject to change without notice.
Owner’s Manual
TSD-DCPDV
DC Power Distribution
Optional Mounting Accessories
1. TSD-RMK 19" Width Rack Mount Kit - For 19" rack mounting, AtlasIED offers an optional rack
mount kit, the TSD-RMK. This rack mount kit can support up to four TSD units. The kit includes
three blank panels designed to fill any unused slots. Use the included hardware to mount the TSD
into the rack mount kit using the top mount screw holes on the TSD.
2. TSD-RMKHR Half Width Rack Mount Kit - AtlasIED offers an optional rack mount kit that can
be used in half width rack applications including the AtlasIED WMA-HR and AWR-HR models.
The TSD-RMKHR can support up to two TSDs. Included is an extra blank panel to fill one of the
spaces if only one TSD is being used.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
TSD-DCPDV
DC Power Distribution
Owner’s Manual
3. TSD-RRMK Rear Rack Mounting Kit - For complete flexibility in mounting a TSD or TSD external
power supplies the optional TSD-RRMK is available. The TSD-RRMK can support mounting of
either two larger TSDs with external power supplies or up to 4 TSD models. Note: Only use the
included M3 x 4mm screws as other screws may be too long and will cause internal damage to
the TSD.
AtlasIED.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 8 –
Specifications are subject to change without notice.
Owner’s Manual
Block Diagram
DC 24V
TSD-DCPDV
DC Power Distribution
D C
D C
D
VARIABLE
VOLTAGE
CONTROL
DC TO DC
POWER
SUPPLY
AUTO RESET
THERMAL SWITCH
F
DC TO DC
POWER
SUPPLY
AUTO RESET
THERMAL SWITCH
F
D
DC 24V OUT
DC 24V OUT
5V - 24VDC
ADJUSTABLE
OUPUT VOLTAGE
2X0.5A
USB
DC 5V OUT
2X0.5A
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
TSD-DCPDV
DC Power Distribution
Owner’s Manual
Specifications
Description
Chassis Color
Chassis Material
Inputs
DC Voltage Input
Connection
Outputs
DC Voltage Output Fixed
Connection
DC Voltage Output Fixed
Connection
DC Voltage Variable
Controls
Variable DC Adjust Recess Pot
DC Power Distribution with Fixed & Variable Outputs
Black
Aluminum
1A - 3A, 24VDC, 3A Max
Removable 2 Position Captive Screw 3.5mm Spacing
24VDC, Current Output Related to Input Power Supply and Load
Qty 4, Removable 2 Position Captive Screw 3.5mm Spacing
5V DC 500mA Each
Qty 2, USB Charge Port, Front Panel
Qty 2, Ports 1 Adjustable Voltage, Variable DC Output 5V – 24VDC,
500mA Each
Indicators
Power Blue
Electrical
Isolation Active
Filters
Over Current
DC Storage & AC Ripple
Auto Reset Thermal Switch for Variable Output
Power Requirements
Idle
Dimensions
Weight
10mA
H 1.5" (39mm) x W 4" (101mm) x D 2.75" (70mm)
6oz, .165kg
Included Accessories
Velcro™ Industrial-Grade
Multi-Mount Plate
Cable Retainers
Qty 1, Includes Two (2) M3 x 4mm Screws
Qty 2
Optional Accessories
TSD 24VDC
TSD-RMK
TSD-RMKHR
TSD-RRMK
Power Supply
1 RU 19" Width Rack Mount Panel (Supports 4 TSD Units)
1 RU Half Rack Width Panel (Supports 2 TSD Units)
Rear Rack Mounting Kit
AtlasIED.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 10 –
Specifications are subject to change without notice.
Owner’s Manual
Notes:
TSD-DCPDV
DC Power Distribution
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
TSD-DCPDV
DC Power Distribution
Owner’s Manual
Limited Warranty
All products manufactured by AtlasIED are warranted to the original dealer/installer, industrial or commercial purchaser to be free from defects in material and workmanship and to be in compliance with our published specifications, if any. This warranty shall extend from the date of purchase for a period of three years on all AtlasIED products, including SOUNDOLIER brand, and ATLAS SOUND brand products except as follows: one year on electronics and control systems; one year on replacement parts; and one year on Musician Series stands and related accessories. Additionally, fuses and lamps carry no warranty. AtlasIED will solely at its discretion, replace at no charge or repair free of charge defective parts or products when the product has been applied and used in accordance with our published operation and installation instructions. We will not be responsible for defects caused by improper storage, misuse (including failure to provide reasonable and necessary maintenance), accident, abnormal atmospheres, water immersion, lightning discharge, or malfunctions when products have been modified or operated in excess of rated power, altered, serviced or installed in other than a workman like manner. The original sales invoice should be retained as evidence of purchase under the terms of this warranty. All warranty returns must comply with our returns policy set forth below. When products returned to AtlasIED do not qualify for repair or replacement under our warranty, repairs may be performed at prevailing costs for material and labor unless there is included with the returned product(s) a written request for an estimate of repair costs before any nonwarranty work is performed. In the event of replacement or upon completion of repairs, return shipment will be made with the transportation charges collect.
EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF CONSEQUENTIAL
DAMAGES FOR PERSONAL INJURY, ATLASIED SHALL NOT BE LIABLE IN TORT OR CONTRACT
FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE ARISING OUT OF THE
INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS. THE ABOVE WARRANTY IS IN LIEU OF
ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
AtlasIED does not assume, or does it authorize any other person to assume or extend on its behalf, any other warranty, obligation, or liability. This warranty gives you specific legal rights and you may have other rights which vary from state to state.
Service
Should your Atlas TSD require service, please contact the AtlasIED warranty department at 1-877-689-8055, ext. 277 to obtain an RA number.
AtlasIED Tech Support can be reached at 1-800-876-3333 or support.atlasied.com.
Visit our website at www.AtlasIED.com to see other Atlas products.
©2017 Atlas Sound L.P. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P.
IED is a registered trademark of Innovative Electronic Designs LLC. All Rights Reserved.
All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS003939 RevB 4/17
AtlasIED.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 12 –
Specifications are subject to change without notice.

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Compact Chassis Design
- Fixed & Variable Outputs
- DC Filtering Per Channel
- DC Isolation Per Channel
- Multiple Mounting Configurations