Playing a CD
Table of Contents
Playing a CD
Without Navigation System
CD BUTTON
CD LOAD INDICATOR
REPEAT BUTTON
RANDOM BUTTON
LOAD BUTTON
120
CD SLOT
EJECT BUTTON
▼
▲
Main Menu
Table of Contents
▼
▲
Main Menu
Playing a CD
With Navigation System
UPPER DISPLAY
Features
TRACK REPEAT ICON
DISC REPEAT ICON
CH DISC ICONS
RANDOM ICON
CD LOAD INDICATOR
EJECT BUTTON
LOAD BUTTON
SEEK/SKIP BAR
SCAN BUTTON
CD/AUX BUTTON
CH DISC BAR
AUDIO DISPLAY BUTTON
CD SLOT
121
Table of Contents
▼
▲
Main Menu
Playing a CD, CD Changer
To Play a CD
To load or play CDs, the ignition
switch must be in the ACCESSORY
(I) or ON(II) position.
You operate the CD player/CD
changer with the same controls used
for the radio. To select the CD
player/CD changer, press the CD
button. The number of the track
playing is shown in the display. With
the in-dash CD changer, the disc and
track numbers are displayed. The
system will continuously play a CD
until you change modes.
Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.
122
To play the radio when a CD is
playing, press the AM/FM button.
Press the CD button again to switch
back to the CD player.
For vehicles with Satellite Radio
To listen to satellite radio when a CD
is playing, press the CD/AUX XM
button.
To play the tape when a CD is
playing, insert a tape in the player
(optional). If a tape is in the player,
press the AUX button. Press the CD
button again to switch back to the
CD player. The cassette player is
optional on all U.S. models.
If you turn the system off while a CD
is playing, either with the PWR/VOL
knob or by turning off the ignition,
the disc will stay in the drive. When
you turn the system back on, the CD
will begin playing where it left off.
▼
Table of Contents
▲
Main Menu
Playing a CD, CD Changer
You can also load a CD into an empty
position while a CD is playing. Select
the empty position (the disc number
indicator is not highlighted) and
press the appropriate preset bar or
touch a disc icon. The current CD
stops playing and starts the loading
sequence. The CD just loaded will
play.
You operate the CD changer with
the same controls used for the radio.
The numbers of the disc and track
playing are shown in the display. On
vehicles with navigation system,
these numbers also appear in the
upper display.
To select a different disc, press an
appropriate preset button (1−6) or
use the Preset 5 (DISC −) to select
the previous disc or Preset 6 (DISC
+) to select the next disc in
sequence. On vehicles with
navigation system, touch the
appropriate disc icon or press the ▲
or ▼ side of the CH/DISC bar. If
you select an empty position in the
CD changer, the system will try to
load the CD in the next available slot.
CONTINUED
123
Features
1. Press the LOAD button until you
hear a beep and see ‘‘LOAd’’ in the
display.
2. The disc number for an empty
position is highlighted and the red
light starts blinking.
3. Insert the disc into the CD slot
when the green CD load indicator
comes on. Insert it only about
halfway; the drive will pull it in the
rest of the way. You will see
‘‘BUSY’’ in the display as the CD
load indicator turns red and blinks
as the CD is loaded.
4. When the CD load indicator turns
green and ‘‘LOAD’’ appears in the
screen again, insert the next CD in
the slot.
5. Repeat steps 1 through 3 until all
six positions are loaded. If you are
not loading all six positions, the
system begins playing the last CD
loaded.
▼
Table of Contents
▲
Main Menu
Playing a CD, CD Changer
For Vehicles without Navigation System
to
SEEK/SKIP − Push the
play the next track on the disc. Push
the
once to replay the track in
play, press twice to replay the
previous track.
To remove rapidly within a track,
press and hold the
, or the
button.
REPEAT − Press to continuously
replay a track. You will see RPT in
the display. Press the RPT button
again to turn it off.
RANDOM − Press to play the
tracks in random order. You will see
RDM in the display. Press the RDM
button again to return to normal play.
SCAN − The SCAN function
samples all the tracks on the
selected disc in the order they are
recorded. To activate it, press and
release the SCAN button. You will
see SCAN in the display, and you will
get a 10 second sampling of each
track on the selected CD. Press the
SCAN button again to get out of the
system.
For Vehicles with Navigation System
To use the controls, press the
AUDIO DISPLAY button, the control
icons will appear on the screen.
TRACK SCAN − Press the icon or
SCAN button, to get a 10 second
sampling of each track on the
current CD. Press the icon or button
again to turn it off.
DISC SCAN − Touch to get a 10
second sampling of the first song of
each disc in the CD changer. Touch
the icon again to turn it off.
TRACK RPT − Touch to
continuously play the same song on
the CD. Press the icon again to stop
the function.
124
▼
Table of Contents
▲
Main Menu
Playing a CD, CD Changer
DISC RPT − Touch the icon to
continuously replay the current CD.
Touch again to turn it off.
TRACK RDM − Touch the icon to
play the current CD in random order.
Touch again to stop.
To Stop Playing a CD
Press the eject button (
) to
remove the CD. If you eject the CD,
but do not remove it from the slot,
the system will automatically reload
the CD after 15 seconds and put it in
pause mode. To begin playing, press
the CD button.
If a tape is in the optional tape player,
press the AUX button to switch to
the tape while a CD is playing. Press
the CD button again to switch back
to the CD player.
If you turn the system off while a CD
is playing, the CD will stay in the
drive. When you turn the system
back on, the CD will begin playing
where it left off.
Removing CDs from the Changer
To remove the disc currently playing,
press the EJECT button. When a
disc is removed from a slot, the
system automatically begins the load
sequence so you can load another
CD in that position. If you do not
remove the disc from the changer
within 15 seconds, the system
returns to the previous mode (AM/
FM or satellite radio). The disc will
reload into the system and will
remain there in a pause mode.
To remove a different disc from the
changer, first select it with the
appropriate preset bar or icon. When
that CD begins playing, press the
eject button. Continue pressing the
EJECT button to remove all the discs
from the changer.
125
Features
CH DISC − Selects an icon and
plays the disc.
Press the AM/FM or CD/AUX
button, or CD/AUX XM button to
switch to the radio or satellite radio
while a CD is playing. Press the CD
button again to play the CD.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising