Blaupunkt | miami CD127 | User's Manual | Blaupunkt miami CD127 User's Manual

Blaupunkt miami CD127 User's Manual
FCC Warning
The equipment has been tested and found to comply with the limits for a Class B device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and, if not installed and used in accordance with instructions, may cause
harmful interference with radio communications. However, there is no guarantee that radio
interference will not occur in particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to contact the dealer or an experienced Radio/TV technician for
help.
You are cautioned that any changes or modifications not expressly approved in this manual could
void your authority to operate this equipment.
CAUTION
• The use of optical instruments with this product will increase eye hazard.
• Because the invisible laser beam in this compact disc player is harmful to the eyes, do not
attempt to disassemble this cabinet. Refer servicing to qualified personnel only.
SAFETY CERTIFICATION
This Compact Disc Player is made and tested to meet exacting safety standards. It meets FCC
requirements and complies with safety performance standards of the US Department of Health and
Human Services.
Owner’s Record
The model and warranty numbers are located on the top of the unit. Record the warranty (serial)
number in the space provided below. Refer to these numbers whenever you call upon your
Blaupunkt dealer regarding this product.
Warranty Number _____________
Attach Sales Receipt Here
2
Table of Contents
English
Español
FCC Warning .................................................... 2
Owner’s Record ................................................ 2
Features ............................................................ 4
Precautions ....................................................... 4
Detachable Face .............................................. 5
Electrical Connections and Installation ............ 6
Installation ........................................................ 8
Maintenance ................................................... 10
Specifications ................................................. 11
Location of Controls ....................................... 12
Instructions—General Operation ................... 12
Audio Operation .............................................. 13
Radio Operation ............................................. 14
CD Player Operation ...................................... 15
Auxiliary Input Jack ........................................ 16
Troubleshooting Guide ................................... 16
Advertencias FCC ........................................ 34
Registro del Propietario ................................ 34
Características .............................................. 35
Precauciones ................................................ 35
Panel Frontal Desmontable (Carátula) ........ 36
Conexiones Eléctricas e Instalación ............ 37
Instalación .................................................... 39
Mantenimiento .............................................. 41
Especificaciones ........................................... 42
Ubicación de los Controles .......................... 43
Instrucciones de Funcionamiento ................ 43
Funcionamiento de Audio ............................ 45
Funcionamiento de la Radio ........................ 45
Funcionamiento del CD ................................ 47
Toma de Entrada Auxiliar ............................. 48
Guía para la Solución de Problemas ........... 48
Français
Portuguese
Avertissement de la FCC ............................... 18
Archive du Propriétaire ................................... 18
Caractéristiques .............................................. 19
Précautions à Prendre .................................... 19
Face Avant Amovible ..................................... 20
Raccordements Électriques et Installation .... 21
Installation ...................................................... 23
Entretien ......................................................... 25
Spécifications ................................................. 26
Emplacements des Commandes ................... 27
Mode d’Emploi/Fonctionnement Général ...... 27
Fonctionnement de l’Audio ............................. 29
Fonctionnement de la Radio .......................... 29
Fonctionnement du Lecteur de CD ................ 31
Prise Auxiliare ................................................. 32
Guide de Dépannage ..................................... 32
Aviso da FCC ............................................... 50
Registro do Proprietário ............................... 50
Características .............................................. 51
Precauções ................................................... 51
Painel Removível .......................................... 52
Conexões Eléctricas e Instalação ................ 53
Instalação ..................................................... 55
Manutenção .................................................. 57
Especificações .............................................. 58
Posição dos Controles ................................. 59
Instruções-Funcionamento Geral ................. 59
Funcionamento do Audio ............................. 61
Funcionamento do Rádio ............................. 62
Funcionamento do CD ................................. 63
Tomada para Entrada Auxiliar ..................... 64
Guia para Solução de Problemas ................ 65
3
ENGLISH
Features
Congratulations on your purchase of this Blaupunkt CD Receiver. Its Codem III-US FM/AM Tuner
and 3-Beam Laser/Anti-Vibration & Anti-Shock CD Player mechanism provide the ultimate in sound
reproduction. Its high-power amplifier and 4-Channel preamp output provide you with tremendous
system configuration flexibility. Its auxiliary input jack lets you easily incorporate portable audio
equipment, such as a cassette or DAT player, into your car’s sound system.
• Codem III-US Tuner Features:
– Multipath Management
– ASU Electrical Impulse Noise Reduction
– Superior AM Frequency Response
– 15 FM/5 AM Presets, Including 5 FM &
5 AM Travel Store Presets
– Station Scan
– Local/Distant Seek & Manual Tuning
• CD Player Features
– Track Up/Down
– Scan, Mix, Repeat
– Cue/Review & Pause/Play
– CD IN Indicator
– Last Position Memory
– 3-Beam Laser Pick-Up
– 1 Bit/8 Times Oversampling Digital Filter
– Silicone-Oil Dampened Anti-Vibration and
Anti-Shock CD Mechanism
• Audio Features:
– 30 Watts x 4 Channel Integrated Amplifier
– Dual-Level Fader
– Over 3 Volts of Distortion-Free Preamp Output
– 4-Channel, Low Impendance (100 Ω) Preamplifier
– 2-Channel RCA Preamp Output Harness Included
– Bass,Treble, Balance, Fader Controls
– Adjustable Maximum Turn-On Volume
– Loudness Button
– Mute Button
– Auxiliary Input
• Other Features:
– Partially Detachable Face
– Amber Illumination
– Display Priority Control
– Temporary Display Change Control
– Clock/Ignition-Off Clock Recall
– 180 x 50 x 155 mm (7 x 2 x 6 1/8 in.)
DIN/ISO Chassis
– Detachable Wire Harness
– Snap-In DIN Sleeve & Mounting Hardware
– Side-Bracket Compatible
Your unit’s detachable front faceplate makes the unit useless to would-be thieves.
Designed, Engineered and Manufactured By Blaupunkt.
Traffic Safety and Precautions
• Do not adjust your unit in difficult driving conditions that demand your full attention.
• As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all
times. Never use your unit in a way that could distract you.
• Always make sure that you are still able to hear any warning signals coming from outside of the
vehicle, such as police or fire engine sirens, so that you can react accordingly.
• If your vehicle was parked in direct sunlight resulting in a considerable rise in temperature inside
the vehicle, allow the unit to cool off before operating your unit.
• The use of optical instruments with this product will increase eye hazard.
• Because the invisible laser beam in this compact disc player is harmful to the eyes, do not
attempt to disassemble this cabinet. Refer servicing to qualified personnel only.
• You are cautioned that any changes or modifications not expressly approved in this manual could
void your warranty.
• Before any jump startings, disconnect all wire harnesses from rear of unit.
• Car Wash precaution - If you have a motorized antenna, make sure to turn off the unit - not just
the tuner - so that the antenna is lowered and antenna damage is prevented.
4
Detachable Face
E
N
G
L
I
S
H
Detaching & Attaching the Face:
The face of this unit can be detached and taken with you to prevent it from being stolen.
Detaching the Face:
Press the REL (Release) Button and detach the face by gently pulling it off as illustrated.
Note: Do not pull it straight out from the chassis. Be sure not to drop the face when detaching it
from the chassis.
Attaching the Face:
Apply the right hand side of the face to the chassis by sliding (part B) of the face to (part A) at the
front of the chassis. Gently push the left side of the face against the front of the chassis until it
snaps into place.
Note: Make sure that the face is inserted right side up. Do not press against the display window.
Do not press hard against the face when attaching it to the chassis, it may be easily attached with
gentle pressure. Do not expose the face to direct sunlight, heat sources such as hot air ducts or
leave it in a humid place. Never leave it on the dash board of a vehicle parked in direct sunlight,
where there may be a considerable rise in temperature inside the vehicle.
Affixing Faceplate For Retail Display:
The faceplate can be affixed to the unit’s chassis, which is desirable for a retail display, for
example.
To affix the faceplate:
Insert the black bolt into the hole at the left front of the top of the radio. See* below.
*
5
Electrical Connections and Installation
@/<?#&*>@! To avoid the aggravation of costly mistakes and serious damage that could make
you feel this way, please carefully read all of the instructions before you begin. Carefully follow all
instructions. You’ll be glad you did!
GENERAL RECOMMENDATIONS
• If you’re not confident that you can install the unit correctly, have it installed by a qualified
Blaupunkt installation technician.
• Use this unit only with negative ground 12 Volt (11-16 Volt) direct current (DC).
• Be sure to detach the faceplate before you start to connect or install the unit.
• Don’t assume that a seemingly matching wire harness in the vehicle has leads that match the
leads of the unit’s wire harness.
• We recommend making and testing all electrical connections before installing the unit. Connect
the leads (wires) according to instructions and diagram below.
ELECTRICAL CONNECTION INSTRUCTIONS
1.
2.
Disconnect the vehicle battery’s negative terminal before making connections.
Connect the speakers and/or external amplifiers (if you have any) following the guidelines in
the SPEAKER CONNECTION section below.
3. Connect the blue (trigger output) lead to the amplifier’s trigger input terminal and/or antenna
motor trigger input terminal (if you have either or both of these items). The combined total
amperage required for triggering the antenna motor and/or amplifier must not exceed 300 mA.
DO NOT connect the blue lead to the antenna’s and/or amplifier’s power supply input.
4. Connect the black (power ground) lead to a grounded metal part on the vehicle. We
recommend grounding all audio system black ground leads (head unit, external amplifier, etc.)
to a common grounding point, preferably a non-painted surface under the instrument panel.
5. Connect the yellow (constant power) input lead to a source of constant battery power,
preferably a terminal to an appropriate slot in the fuse box.
6. Connect the red (turn-on power) input lead only after the other leads are connected. Be sure to
connect the red lead to a positive (+) 12 Volt power terminal that is energized only when the
ignition key is set to the on position or accessory position.
7. Cover the ends of any unused leads with electrical tape. This will prevent them from touching
the vehicle or each other and causing a short-circuit and damage to the radio or vehicle.
8. Reconnect the vehicle’s battery.
9. Verify that no fuses have blown.
10. Plug the harness into the unit.
11. Attach the faceplate and test the unit.
Once the connections have been successfully made, you can begin to mount the unit.
SPEAKER CONNECTIONS
The unit’s Dual-Level Fader allows you to fade between the front and the rear channels using
either the front and/or rear speaker leads and/or the rear preamp outputs, providing you
tremendous flexibility in configuring your speaker arrangement:
• You can connect a speaker (regular, co-axial or tri-axial speakers or component speaker system,
all hereafter referred to simply as “speaker”) to each of the units’ four pairs of speaker leads.
• You can connect the 2 RCA preamp outputs to multiple external amplifiers and power multiple
speakers or speaker systems through the amplifiers. (Blaupunkt amplifiers and speakers
available
separately). To add front preamp output,
purchase Blaupunkt part 8634494218 which is included
in the CDC-A05 and CDC-A071
changer’s harnesses. (See page 11)
• You can use either or both of these two methods.
Connecting the Speaker Leads
To prevent short circuits or serious damage to the unit and/or speakers:
• Connect the speaker leads only as indicated in the wiring diagram. Disconnect the vehicle
battery’s negative terminal before making connections.
6
• Only use speakers that have impedance ratings of 4 ohms or higher and have power-handling
capabilities greater than the receiver’s stated power level.
• The unit’s internal amplifier is designed to handle a 4-ohm load on each pair of speaker leads.
• DON’T connect two speakers to a single pair of speaker leads (“in parallel”) unless both speakers
each have at least 8 ohms impedance.
• DON’T connect the left and right speaker leads to each other or to the same speakers.
• DON’T connect the front and rear speaker leads to each other or to the same speakers.
• DON’T connect the negative speaker leads to each other.
• DON’T connect the positive speaker leads to each other.
• DON’T connect any active speakers (with built-in amplifiers) to the speaker leads unless their
owner’s manuals specifically state that this is O.K.
• Cover the ends of any unused leads with electrical tape. This will prevent them from touching the
vehicle or each other and causing a short-circuit and damage to the receiver or vehicle.
Connecting the Pre-Amp Outputs to External Amplifier(s)
To prevent short circuits or serious damage to the receiver, amplifier, and/or speakers:
• Follow the amplifier’s instructions on how to connect the unit’s preamp outputs to the amplifier(s)
AUXILIARY
ANTENNA MOTOR
TRIGGER SWITCH
*
SWITCH
*
* Harness has single blue lead that can
be used for either antenna motor
trigger switch or amp trigger or spliced
for use with both. (See note 3.)
7
and connect the speaker(s) directly to the amplifier.
Installation
Recommendations
• Carefully choose the mounting location so that the unit won’t interfere with normal driving.
• Avoid mounting locations where the unit would be subject to high temperatures, such as from direct
sunlight or hot air from the heater, or where it would subject to dust, dirt or excessive vibration.
• The illustration below shows a typical installation, however, you may need to adjust the
installation, depending on the unit. If you have questions or need additional installation hardware,
consult your Blaupunkt dealer.
• Make sure the unit is firmly anchored (preferably at both front and back) and does not vibrate.
Mounting Hardware
(2)
Mounting Strap
and Screw
(1)
Sleeve
(3)
Release Keys
Mounting The Unit in Most Dashboards
1 Install the Sleeve (1) in the dashboard.
2 Select and bend the appropriate tabs to hold the sleeve firmly in place.
3 A. Attach the Mounting Strap (2) to the underside of the dashboard, using screw.
B. Attach the back of the unit to the mounting strap using the support stem bolt and hardware.
Bend these tabs
Dashboard
8
Mounting the Unit in a Japanese Car
You may have difficulty mounting this unit in some Japanese cars that have ISO mounting features
(side-bracket mounting systems).
In this case, consult your Blaupunkt dealer.
1 Run a blade along the slits on the back of the front trim ring, unscrew the two side screws, and
separate it from the unit. Save the trim ring and related hardware in case you ever want to install
the unit in another vehicle.
2 Use the vehicle’s own mounting hardware to attach the unit.
2 TOYOTA
1
max. size M5x8
Slit
to dashboard/center console
max. size
M5x8
Bracket
Support
2 NISSAN
max. size M5x8
to dashboard/center console
max. size
M5x8
Bracket
Support
9
Maintenance
Removing the Unit
Use the Release Keys as shown below. Keep them in a safe place in case you need them in the
future.
Fuse Replacement
When replacing the fuse, be sure to use one with the correct amperage, which will be stated on the
fuse case. Never use a fuse that has a stated amperage exceeding the one supplied for this unit, as
this could cause malfunction and serious damage to the unit.
10
Specifications
Audio Power Specifications
Power Output and Total Harmonic Distortion: 13 watts per channel minimum continuous average
output into 4 ohms, 4 channels driven, from 30-15,000 Hz with no more than 1% total harmonic
distortion.
Other Specifications
Tuner
FM
Tuning Range:
Intermediate Frequency:
FM Mono Sensitivity:
Seek lo sensitivity:
87.5 - 107.9 MHz
10.7 MHz
13 dBf
51 dBf
Seek sensitivity
Selectivity:
Signal-to-Noise Ratio:
Harmonic distortion at 1 kHz:
Separation:
Frequency Response:
31 dBf
80 dB at 400kHz
65 dB (stereo), 70 dB (mono)
0.7% (stereo), 0.5% (mono)
30 dB
30-15,000 Hz ± 3 dB
AM
Tuning Range:
Seek lo sensitivity
Seek sensitivity:
Intermediate Frequency:
Signal-to-Noise Ratio:
Frequency Response:
530 - 1,710 kHz
50 dBµV
25 dBµV
450 kHz
50 dB
30-5,000 Hz + 3dB
Audio
Speaker Impedance:
Maximum Amp Power:
RMS Power:
Bass Control:
Treble Control:
Loud:
Preamp Output:
4-8 ohms
4 X 30 Watts (at 4 ohms)
4 X 13 Watts (at 4 ohms) <1% THD
± 10 dB @ 100 Hz
± 10 dB @ 10 kHz
+ 8 dB @ 60 Hz & + 2 dB @ 8 kHz
4-Channel, Low-Impendance (100 Ω) Preamplifier
Over 3 Volts of Distortion-Free Preamp Output
CD Player
Signal-to-Noise Ratio:
Dynamic Range:
Frequency Response:
Harmonic Distortion:
90 dB
90 dB
5-20,000 Hz + 3 dB
.01%
General
Dimensions (w/o projecting parts/controls):
Mass:
Power Requirement (neg. grnd.):
Operating Temperature:
Supplied Accessories:
Optional Accessories:
180 x 52 x 155 mm, 7 x 3 x 6 1/8 in.
Approx. 1.4 kg (3.0 lb.)
12 V DC car battery (11-16 V DC allowable)
15°F to 120°F, –10°C to 50°C
• Unit
• Faceplate
• Wire Harness, including 2-Channel RCA Preamp Output
Harness
• DIN Sleeve
• Mounting Hardware
• Owner’s Manual in English, French, Spanish and Portuguese
• 4-Channel Preamp Output Harness (Part No. 8634494218)
(Available at 1-800-920-2121)
Design and specifications subject to change without notice.
11
Location of Controls
8
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
REL (Release) Button
PWR (Power) Button
Source (and Radio Band) Select
Mute/Audio Button
SCA (Scan) TS (Travel Store)
LD (Loudness)/ SENS (Tuning Sensitivity)
CLK/Display Change
Disc Insertion Slot
CD Eject
+ Button
Volume +
Bass +
Treble +
Balance Left
Fade to Front
11. - Button
Volume Bass Treble Balance Right
Fade to Rear
12. /\ Button
Seek and Manual Tuning
Track Up
Audible CD Cue
Clock Hours
13. V Button
Seek and Manual Tuning
Track Down
Audible CD Review
Clock Minutes
14. FM/AM Presets
15. CD RPT
16. CD MIX
17. CD Pause
18. Display
Instructions — General Operation
See Traffic Safety & Precautions on page 4.
“Press” means a momentary press of less than 1/2 second. All presses requiring more than 1/2
second are followed by beep.
“Time Out” When additional button presses are anticipated to complete a procedure, the unit will
automatically exit the procedure after 4 seconds of inactivity.
12
Ignition-Off Clock Recall
Any button press while ignition off displays time for about 8 seconds.
Ignition-On
Unit lights up and clock is displayed.
Release for Detachable Faceplate
Push REL to detach face. Already-inserted CD remains in unit. Current settings and source mode
are stored. If power was not switched off before face removed, unit will automatically power-on
when face is reattached.
Power (PWR) On/Off
When ignition on, press PWR or insert a disc to turn unit on. Last-used source becomes active,
unless unit is turned on by inserting disc, in which case CD player becomes active.
Power Off
Press PWR to turn unit off. Unit stores current settings for source, station or track, etc. Antenna/
amplifier trigger wire shuts off voltage. (If faceplate still attached, display switches to clock.)
Setting the Clock
Turn the unit on. Press the CLK Button for four seconds until the clock starts blinking. (The display
will change after two seconds. Ignore this and continue to hold for two more seconds.) Once the
clock starts blinking, Press the /\ to set the hour, and press the V Button to set the minutes. (To
change the minute indicator to the nearest hour (:00), you can press the MUTE Button. Press the
CLK Button again to activate the clock.
Changing the Information Displayed
You can temporarily change the information shown in your unit’s display. You can also select which
information has “display priority” and is shown in the display except for moments when adjustments
are made.
• To change the display priority, press the CLK Button for two seconds. The display priority
changes. The display priority choices are clock or Radio Frequency and Elapsed Play Time /
Track Number.
• To change the display temporarily, press and release the CLK Button to access the desired
information.* After five seconds, the display changes back to the priority information.
Source (SRC)
Use SRC to select source - AMT, FM1, FM2, FMT or CD (if already inserted), and/or auxiliary input
(even if no input on aux in line).
Audio Operation
Volume Control Buttons (+/–)
Press + and - to increase/decrease volume from 0 to 63, in increments of 1.25 dB/step. Volume
control is accessible from all modes except Bass, Treble, Balance and Fade modes.
Adjustable Maximum Turn-On Volume
First adjust the volume to the (maximum) volume level desired when the unit is turned on. Press
and hold the PWR Button for more than two seconds. The unit turns off and the turn-on volume
level is memorized. When the unit is turned on, the volume will be at the memorized level, even if
the unit was turned off while the volume was at a higher level. However, if the volume is turned off
when the volume level is lower than the stored Turn-On volume level, the volume will be at the
lower level when the unit is turned back on.
Mute
Press Mute to temporarily reduce volume by 20 dB. “MUTE” appears. Mute is terminated by
pressing any button.
13
Bass, Treble, Balance and Fade
Press Mute/AUDIO for more than 1/2 second to access Bass. Subsequent presses access Treble,
Balance and Fade modes.
Bass
- Adjust from +7 to -7 at 2 dB/step using + to increase bass, – to decrease.
Treble - Adjust from +7 to -7 at 2 dB/step using + to increase treble, – to decrease.
Balance - Adjust balance from 9 (all the way left) using + to -9 (all the way right) using –.
Fader - Adjust fader from 9 (sound only from the front) using + to -9 (sound only from the rear) using –.
Loudness (LD)
Press LD to increase sound of low and high frequencies. LOUD icon appears. To cancel, press LD
again.
Radio Operation
Last Station Memory
Each FM bank and AM band has its own last station memory, which holds last-tuned frequency for
that band or bank irrespective of whether that frequency is stored into a preset.
Selecting Bands
Press SRC as needed to access FM1, FM2, FM3/FMT, AM/AMT banks.
Seek Tuning
Press /\ or V to seek next receivable frequency. Tuning stops at frequency that fulfills sensitivity
requirements predetermined by sensitivity set through SENS/LD button.
Tuning Sensitivity (SENS)
Press SENS/LD for more that 2 seconds to switch between local (lo) and distant search sensitivity.
When “lo” is absent from the display, search sensitivity setting is distant.
Radio Reception Hints
• When listening to weak or distant AM stations, adjusting the Treble to minimum (-7) will reduce
noise and improve sound.
• In general, set SENS to distant tuning is in rural areas or or where stations tend to be weak and
distant, and to local tuning when in metropolitan areas or areas where stations tend to be strong
and local.
Stereo Symbol
Stereo symbol turns on if a stereo station with an incoming signal of at least 20 dBµV is received.
The unit gradually switches between mono to stereo automatically.
14
Manual Tuning
Press /\ or V for more than 1/2 second and frequency will go one channel/step in direction pressed.
Press and hold causes continuous manual tuning. Unit returns to seek tuning mode after 4 seconds
or after storing a station on a preset.
Preset Station Storage
After tuning desired frequency on desired band, press and hold a Preset Button for more than 2
seconds to store current frequency. Audio is muted during storage, preset number appears, and
beep acknowledges storage.
Preset Station Selection
Press desired Preset Button.
Travel Store
This feature allows you to automatically store stations onto all 5 preset buttons and is especially
useful when traveling outside your normal listening area. In any FM Bank, press SCA/TS for 2
seconds to activate FM Travel Store. (In AM Bank, press it for 2 seconds to activate AM Travel
Store.) TS appears. Beginning at the bottom of the band, TS stores five relatively strong stations,
one on each of the five preset buttons, and returns to preset 1. Pressing any tuning-related button
during Travel Store process cancels search operation.
Station Scan Tuning
Press SCA. Frequency blinks (along with preset number if appropriate) during scanning. Unit stops
at receivable stations for 4 seconds. Unit continuously scans until user stops scan by pressing
SCA, another tuning button or SRC.
Compact Disc Play Operation
CD Insertion
Make sure that “CD IN” isn’t lit. Insert a disc into Disc Slot with printed surface facing up. Playback
starts at beginning of first track. In rare instances when a disc has more than 28 tracks, it may take
up to about a minute for the unit to read the disc and for playback to start.
CD Playback
When a CD is already in unit, press SRC as needed to activate CD play. Display shows elapsed
play time and track number.
CD Eject
Press eject. Disc ejects. If disc is not removed within about 5 seconds (unless ignition off) or if eject
is pressed again within this time, disc is automatically reloaded, although unit stays with current
audio source. Press the SRC as required to access CD play and resume disc playback.
Insert/Eject Summary
Activity
Ignition Off
Insert
No Reaction
Eject
Disc ejects. Stays
out unless other
button pressed.
Ignition On/
Unit Off
Turns Unit On,
becomes active
source.
Disc ejects. After
5 seconds, disc
re-inserts.
Ignition On/
Power On/
Other Source
CD Player
becomes active
source.
Disc ejects. After
5 seconds, disc
re-inserts.
Track Up/Down
Press /\ and V select track. Elapsed play time and track number appear. Pressing V will restart
current track if more than 1 second of track has been played. If less than 1 second, unit goes to
beginning of previous track.
15
CD Track Cue and Review
Press and hold /\ or V for audible cue or review.
CD Track Repeat Play
Press RPT to play current track repeatedly (“rpt” appears temporarily in display.) (This cancels MIX
or SCAN if previously active.) If track manually advanced, RPT becomes active for new track. To
cancel, press again.
Mix Play
Press MIX to randomly select a track and thereafter play tracks in random order (“rdm” appears
temporarily in display.) (This cancels RPT or SCAN, if previously active.) A track will not be played
a second time until all tracks have been played. To cancel, press again.
CD Track Scan
Press SCA to start Track Scan. SCA deactivates any active MIX or RPT modes. Track No. and
Elapsed Play Time blink during scanning operation. Unit stops at each track for 10 seconds. Unit
continuously scans until user stops scan by pressing SCA or another playback related button.
Pause
To pause, press II>. To cancel, press again or press /\, V, SCA, RPT, or MIX.
CD Player Reset
In unlikely case of CD player trouble, reset CD player by turning unit’s power and/or ignition off, and
then power-on unit. (See TROUBLESHOOTING below.)
Auxiliary Input Jack
Connect other audio equipment, such as a portable cassette or DAT player, through the 500mV/3.5
mm pigtail connector. Access auxiliary equipment output by pressing SRC until “InP” appears.
Adjust volume, bass, and treble settings through the receiver.
Troubleshooting Guide
The following check will assist in the correction of most problems which you may encounter with your
unit. Before going through the check list below, refer back to the connection and operating procedures.
General
Trouble
No sound.
Cause/Solution
• Adjust the volume with the + button.
• With a two-speaker system set the fader control to the center
position.
Radio reception
Trouble
Preset stations are not receivable.
Cause/Solution*
• The broadcast is too weak.
Automatic tuning is not possible.
• The broadcast is too weak. —> Use manual tuning.
Travel Store feature does not complete
storing of six stations.
• Not enough broadcast frequencies are receivable.
* Also make sure that antenna is connected, extended and dry inside.
CD operation
Trouble
CD play does not start.
Cause/Solution
• Dusty or defective disc.
• The ambient temperature is more than 50°C (120°F).
• Disc has more than 28 tracks. Wait for about a minute for playback to start.
• The disc is inserted with the printed side downwards.
• CD-ROM (computer) disc inserted.
The sound skips due to vibration.
• The unit is installed at an angle of more than 20°.
• The unit is not installed on the sturdy part of a car.
• Dusty or defective disc.
If the above solutions do not help to improve the situation, consult your nearest Blaupunkt dealer or in the United States call 1-800-266-2528.
16
German Headquarters:
Blaupunkt-Werke GmbH
Postfach 77 77 77
D-31132 Hildesheim
Germany
Robert Bosch Corporation
Sales Group — Blaupunkt Division
2800 South 25th Avenue, Broadview, Illinois 60153
1-800-950-BLAU
Robert Bosch, SA., DE, C. V.
Dr. Lucio 270
Cols. Doctores, Mexico 06720
Made in Malaysia
Fabrique en Malasie
Hecho en Malasia
Fabricado en Malaysia
Copyright 1997 by the Robert Bosch Corporation
No portion of this work may be reproduced in any form without
the written consent of the Robert Bosch Corporation.
17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising