Landa EU Cat Cover 07.qxp - Mancorp Industrial Sales

Landa EU Cat Cover 07.qxp - Mancorp Industrial Sales
Water Cleaning Equipment,
Parts & Accessories
North America’s No.1 Dealer Support Network
With Landa products you get so much more than high-quality cleaning equipment.
You also get the expertise and experience of the largest and most highly trained
pressure washer dealer support team in North America.
There’s more to Landa
hardness to identifying local wastewater treatment regula-
cleaning equipment than a
tions. Landa dealers are well schooled in the sometimes-
host of safety features and
complex formula of combining the right pressure washer
rugged, industrial quality.
with the ideal detergent or accessory to produce the fastest,
As with any equipment that has moving parts, pressure
most effective cleaning solution for your application. They
washer value is also measured by its
offer on-site demonstrations to ensure
customer service and technical support.
your complete satisfaction.
That’s where Landa excels.
Certified Technical Support: Landa deal-
Landa equipment is backed by North
ers also provide the technical support
America’s largest network of cleaning
that will keep your equipment in top con-
equipment dealers, highly skilled in
dition so you avoid costly downtime.
keeping your machine operating at peak
Authorized Landa service centers must
performance so you can enjoy years of
pass a rigorous factory certification train-
uninterrupted high-pressure cleaning.
ing program and are regularly schooled
Local Cleaning Expertise: Landa’s 250 dealers are the most
in the field and at the factory on the intricacies of effective
seasoned consultants in the industry devoting many years
high-pressure cleaning. They also provide on-site technical
to helping customers just like you analyze and solve high-
and preventive maintenance support for added protection to
pressure cleaning problems, everything from tackling water
your investment. In short, Landa’s got you covered!
Table of Contents
EQUIPMENT
Pressure Washers . . . . . . . . . . . . . . . . . . . .2-11
Parts Washers . . . . . . . . . . . . . . . . . . . . . .12-15
ACCESSORIES AND PARTS
Pressure Washers Parts
Pressure Washer Accessories........................ 16-24
Guns & Lances .............................................. 25-34
Hoses & Hose Reels ...................................... 35-45
Couplers, Fittings & Filters ............................ 46-58
Nozzles .......................................................... 59-68
Pumps & Pump Kits ...................................... 69-81
Unloaders, Valves,
Injectors & Gauges ........................................ 82-99
Engines, Motors & Parts............................ 100-107
Burners & Coils.......................................... 108-115
Electrical Components................................ 116-124
Chassis Components ..................................125-126
Detergents ........................................................127-132
Index ................................................................133-136
Hot Water Portable
PRESSURE WASHERS
Electric-powered, Diesel / Oil-heated
PHWS:
Top-of-the-line, industrial-duty hot water pressure washer built to work day-and-night
For a quarter of a century, the PHWS has been customers’
preferred choice for electric-powered, hot-water pressure
washers. Engineered with the highest quality components
and a flurry of innovations that have revolutionized the
market, the PHWS is legend for its ruggedness and reliability.
• 7-Year Warranty - Landa Pump
• Pump: Landa Pump, belt-drive, industrial grade
• Hose: 50', 2-Wire Tuff-Skin, rated for 6000 PSI
The PHWS features a super-efficient, horizontal, Schedule 80
heating coil; long-life, low-RPM, belt-drive Landa Pump;
aluminized steel inner coil wrap with high temperature
tolerance; detergent metering valve; adjustable thermostat;
time delay shutdown; and magnetic starter.
SS Variable Pressure Wand
●
ETL Certification to UL-1776
●
Stainless Steel Coil Wrap
●
Time-Delay Shutdown
●
Wet Steam Combination
●
Mag Wheels
●
Float Tank with Metering Valve
●
Features
Standard
Optional
Part No.
GPM
PSI
Pump RPM
HP
Voltage
Amps
PHWS3-11024D
PHWS4-20024A
PHWS4-30024A
PHWS5-30024B
2.5
4.2
3.9
4.8
1000
2000
3000
3000
1075
935
735
1035
2
6.2
8.2
10
120 1ph
230 1ph*
230 1ph*
230 3ph*
20
29
38
34
Available options: Automatic start/stop
*Models available in other electrical configurations.
Electric-powered, Diesel / Oil-heated
OHW:
Affordable alternative pressure washer for heavy-duty usage
The OHW is an affordable option for outdoor, heavyduty, hot-water pressure washing. Designed with some
features as the PHWS, such as the Schedule 80 horizontal
heating coil, backed by Landa’s standard 5-year warranty
and heat-efficient aluminized steel inner coil wrap.
• 7-Year Warranty - Landa Pump
• Pump: Landa Pump, belt-drive, industrial grade
• Hose: 50', 1-Wire Tuff-Skin, rated for 3000 PSI
Like the PHWS, the OHW gets its cleaning punch from
an industrial, belt-drive Landa pump, industrial-grade
Baldor motor and energy-efficient burner with dial-in
air metering. The 3-phase models have a magnetic starter.
ETL Certification to UL-1776
●
Float Tank with Metering Valve
●
Optional
Stainless Steel Coil Wrap
❍
Time-Delay Shutdown
❍
Mag Wheels
❍
PSI
Pump RPM
HP
Voltage
Amps
OHW3-11024D
OHW4-20024A
OHW4-30024A
2.5
4.2
3.9
1000
2000
3000
1075
935
735
2
6.2
8.2
120 1ph
230 1ph*
230 1ph*
20
29
36
Available options: Automatic start/stop or time delay
shutdown, mag wheels, stainless steel outer coil wrap.
Most economical hot water pressure washer for medium-duty usage
The HOT pressure washer offers the most economical
choice in a horizontal coil design with many of the features
that have made Landa pressure washers the most reliable
and popular on the market.
The HOT also has a belt-drive, Landa pump, a Duracoil
with aluminized steel inner wrap, plated steel variable
pressure wand and tubed pneumatic tires for easy
maneuvering in all terrain.
The HOT3-30034D delivers steam up to 310°F.
Part No.
GPM
HOT2-11024D
2.0
HOT2-15024D
1.9
HOT3-11024D
2.8
HOT4-20024A
3.5
Extra-Hot Steamer (310°F):
HOT3-30034D
2.5
*Also available in 208V 1ph
LANDA
●
GPM
*Models available in other electrical configurations.
2
Standard
SS Variable Pressure Wand
Part No.
Electric-powered, Diesel / Oil heated
HOT:
Features
• 7-Year Warranty - Landa Pump
• Pump: Landa Pump, belt-drive, heavy duty grade
• Hose: 50', 1-Wire Tuff-Skin, rated for 3000 PSI
Features
Variable Pressure Wand
ETL Certification to UL-1776
Stainless Steel Coil Wrap
Time-Delay Shutdown
Mag Wheels
Float Tank with Metering Valve
Standard
●
●
Optional
❍
❍
❍
❍
PSI
Pump RPM
HP
Voltage
Amps
1000
1500
1000
2000
1100
1100
1375
1350
1.5
2
2
5
120 1ph
120 1ph
120 1ph
230 1ph*
18
20
20
25
300
1350
1.5
120 1ph
12
Available options: Automatic start/stop or time delay
shutdown, mag wheels, stainless steel outer coil wrap, float
tank with inlet metering valve
Hot Water Skids
PRESSURE WASHERS
Gasoline / Diesel-powered, Diesel / Oil heated
SLX:
Top-of-the-line, skid-mounted washer for on-site cleaning where super high water volume is needed
Powered by industrial duty, Honda gas and water cooled
Lombardini diesel engines, the SLX sports the same top
of the line features as the SLT and in addition provides an
extremely high volume (up to 9.9 gpm) of hot 200° water
at up to 2500 PSI.
• Pump: Landa Pump, belt-drive, industrial grade
• Engines: Honda, Lombardini Diesel
Features
This mean machine is ideal for multiple gun applications
for a fast and furious clean.
Gas version comes with a 30-gallon diesel fuel tank and a
16-gallon gas tank. Diesel model has single 40-gallon
tank.
Standard
Stainless Steel Coil Wrap
●
Adjustable Thermostat
●
Wet Steam Combination
●
SS Variable Pressure Wand
●
2000W Winco Generator
●
7.5 Gallon Float Tank
●
Vibration Isolated Platform
●
Optional
N/A
Part No.
GPM
PSI
Pump RPM
HP
Engine
SLX10-20324E
SLX10-25324E
SLX10-25824E
9.9
9.5
9.5
2000
2500
2500
1560
1560
1470
20
24
27
Honda
Honda
Lombardini Diesel
Gasoline / Diesel-powered, Diesel / Oil heated
SLT:
Top-of-the-line skid-mounted washer for on-site cleaning where heavy-duty is demanded
Powered by industrial duty, Honda and Vanguard gas and
water cooled Lombardini diesel engines, the SLT is as
beefy as they come.
• Pump: Landa Pump, belt-drive, industrial grade
• Engines: Honda, Vanguard, Lombardini Diesel
Features
Standard
The SLT delivers 200° hot water in a high powered package
that delivers up to 7.8 gpm and 3200 PSI in cleaning punch.
Stainless Steel Coil Wrap
●
Adjustable Thermostat
●
Among the SLT’s many features are: a 3/4-inch schedule 80
pipe coil heat exchanger, belt drive Landa Pump with 7 year
warranty, stainless steel coil wrap, protected by a rugged
2" x 4" x 1/8" thick steel tubing frame.
Wet Steam Combination
●
SS Variable Pressure Wand
●
2000W Winco Generator
●
7.5 Gallon Float Tank
●
The engine and pump are vibration isolated from the frame
for fatigue resistance and the gas version of the SLT
comes with a 10 gallon fuel tank for gas and a 15 gallon
diesel tank (26-gallon single fuel tank on diesel models).
Vibration Isolated Platform
●
Optional
N/A
Part No.
GPM
PSI
Pump RPM
HP
Engine
SLT5-30224E
SLT6-32324E
SLT8-30324E
SLT5-30824E
SLT6-32824E
SLT8-30824E
5.2
5.9
7.8
4.4
6.3
7.8
3000
3200
3000
3000
3200
3000
1295
1570
1470
1295
1470
1560
16
20
24
16
27
27
Vanguard
Honda
Honda
Lombardini Diesel
Lombardini Diesel
Lombardini Diesel
Electric-powered, Diesel / Oil heated
SEHW:
Top-of-the-line skid-mounted washer for on-site cleaning where electricity is readily available
The most rugged electric-powered hot-water pressure
washer in a skid frame. Featuring a 11/4-inch square steel
frame, industrial-duty 15 HP Baldor motor, long-life, beltdrive Landa Pump and Schedule 80 Duracoil wrapped
in an aluminized steel covering for optimum heating
efficiency, the SEHW is quality throughout.
The motor and pump are vibration isolated from the
frame for fatigue resistance. The SEHW also comes with
time-delay shutdown and extra-large, 10-gallon dieselfuel oil tank for hours of hot water and uninterrupted
cleaning.
Part No.
GPM
PSI
Pump RPM
SEHW6-35024B
5.2
3500
1340
* Also available in 208V or 360V 3ph
• 7-Year Warranty - Landa Pump
• Pump: Landa Pump, belt-drive, industrial grade
• Electric Motor: 15 HP Baldor
Features
Standard
Stainless Steel Coil Wrap
●
Adjustable Thermostat
●
Wet Steam Combination
●
SS Variable Pressure Wand
●
Float Tank with Metering Valve
●
Vibration Isolated Platform
●
Optional
HP
Voltage
Amps
15
230 3ph*
44
N/A
Available options: Wheel kit (4 pneumatic tires), automatic
start/stop (replaces time-delay shutdown)
LANDA
3
Hot Water Mini-Skids
PRESSURE WASHERS
Gasoline-powered, Diesel / Oil heated
PGHW:
Classic model featuring heavy-duty ruggedness within a compact frame design
As Landa’s most popular gasoline-powered, industrial
hot water pressure washer, the PGHW combines a smaller
size with the ruggedness you’ve come to expect from Landa.
It is loaded with many of the same features of the larger-size
skid models such as 11/4-inch square steel frame, long-life,
belt-drive Landa Pump 7-year warranty and Schedule 80
Duracoil backed by a 5-year warranty and wrapped in an
aluminized steel covering for optimum heating efficiency.
The biggest PGHW is powered by a 27 HP, water-cooled
Kawasaki engine and delivers cleaning power of up to 5
GPM and 5000 PSI.
PGHW5-50524E
with 5000 PSI
PGHW
All other models
NEW!
• Pump: Landa Pump, belt-drive, industrial grade
• Engine: 13 - 27 HP Honda, Vanguard or Kawasaki
Features
Standard
SS Variable Pressure Wand
●
Vibration Isolated Engine
●
Stainless Steel Coil Wrap
●
Adjustable Thermostat
●
Wet Steam Combination
●
2000W Winco Generator
●
Float Tank with Metering Valve
●
Optional
Part No.
GPM
PSI
Pump RPM
HP
Engine
Start
PGHW4-30324E
PGHW5-30224E
PGHW5-35324E
PGHW4-40324E
PGHW5-50524E
3.5
4.8
4.7
4.0
5.0
3000
3000
3500
4000
5000
1125
1375
1360
1425
1585
13
16
20
20
27
Honda
Vanguard
Honda
Honda
Kawasaki
Electric
Electric
Electric
Electric
Electric
N/A
Available option: Wheel kit with four pneumatic tires
Gasoline-powered, Diesel / Oil heated
PGDC:
Affordable alternative design with belt-drive Landa pump and 12V DC burner
The PGDC provides an economical alternative to the
skid family without sacrificing ruggedness. Powered
by electric-start Honda or Vanguard engines the PGDC
is also protected by a 11/4-inch square steel frame, and
has a 7-year warranty, belt-drive Landa Pump and
Schedule 80 Duracoil backed by a 5-year warranty with
an aluminized steel covering. The water is heated by a
high-efficiency 12V burner assembly (battery not included.)
• Pump: Landa Pump, belt-drive, industrial
• Engine: 13 - 20 HP Honda or Vanguard
Features
Standard
SS Variable Pressure Wand
●
Vibration Isolated Engine
●
Optional
N/A
❍
Adjustable Thermostat
Stainless Steel Coil Wrap
❍
Float Tank with Metering Valve
❍
Part No.
GPM
PSI
Pump RPM
HP
Engine
Start
PGDC4-35324E
PGDC5-35224E
PGDC5-35324E
3.8
4.7
4.7
3500
3500
3500
1185
1185
1185
13
16
20
Honda
Vanguard
Honda
Electric
Electric
Electric
Available options: Wheel kit (4 pneumatic tires), stainless
steel coil wrap, float tank and inlet detergent metering valve
Gasoline-powered, Diesel / Oil heated
MHP:
Economy mini-skid with extra narrow frame, belt-drive pump and 12V DC burner
The MHP is an economy mini-skid, hot-water pressure
washer with an extra narrow frame for maneuvering
through doorways. Less than 25-inches in width, the
MHP models is also powered by electric-start Honda
or Vanguard engines. The narrow-frame chassis is made
of rugged 11/4-inch steel and the Schedule 80 heating
coil is backed by a 5-year warranty and protected by an
aluminized steel inner wrap. The MHP also utilizes a 12V
burner assembly for heating water (battery not included).
• Pump: Landa Pump, belt-drive, Industrial
• Engine: 11 - 20 HP Honda or Vanguard
Features
Standard
Optional
N/A
●
Variable Pressure Wand
❍
Vibration Isolated Engine
❍
Adjustable Thermostat
Stainless Steel Coil Wrap
❍
Float Tank with Metering Valve
❍
Part No.
GPM
PSI
Pump RPM
HP
Engine
Start
MHP4-30324E
MHP4-35324E
MHP4-35224E
MHP5-35324E
3.5
3.8
3.8
4.2
3000
3500
3500
3500
1160
1185
1185
1185
11
13
16
20
Honda
Honda
Vanguard
Honda
Electric
Electric
Electric
Electric
Available options: Wheel kit (4 pneumatic tires), stainless
steel coil wrap, float tank w/ inlet detergent metering valve
4
LANDA
Hot Water Portable
PRESSURE WASHERS
Gasoline-powered, Diesel / Oil heated
MVC:
Entry-level, compact, hot water pressure washer for on-site cleaning
The MVC Commando is an ideal compact, hot-water
pressure washer for on-site cleaning with its unique design
and portability. Protected by a welded, one-piece, 11/4"
square steel cage, the MVC has a Schedule 80 heating coil
with 5-year warranty, a 10-gauge steel chassis with epoxy
powder coat finish, and easy-to-reach control panel with
tachometer and hour meter for maintenance monitoring.
The entire unit rides on four 13" tubed pneumatic tires
ideally spaced for balancing and stability.
• Pump: Landa Pump, direct-drive, heavy duty
• Gasoline Engine: 9 - 13 HP Honda
Features
Standard
Variable Pressure Wand
●
Vibration Isolated Engine
●
Adjustable Thermostat
●
Optional
N/A
❍
Stainless Steel Coil Wrap
Mag Wheels
❍
Float Tank with Metering Valve
❍
Part No.
GPM
PSI
Pump RPM
HP
Engine
Start
MVC3-30324
MVC4-30324
MVC4-30324E
MVC4-35324E
MVC4-30324E/S*
3.0
3.5
3.5
3.5
3.5
3000
3000
3000
3500
3000
3400
3400
3400
3400
3400
9
11
11
13
13
Honda
Honda
Honda
Honda
Honda
Recoil
Recoil
Electric
Electric
Electric
*Designed for high altitude applications
Electric-powered, Diesel / Oil heated
SUV:
Super-compact, entry-level hot water pressure washer, 12VDC
NO
BATTERY
NEEDED
Shown with
optional
hose reel
There’s never been an entry-level, gasoline-powered, hot water pressure washer
so compact and yet so reliable as Landa’s
new SUV.
The SUV is made possible by the technologically advanced Robin-Subaru engine being matched
with a Landa proprietary Super-Duty Regulator (SDR)
to create an extremely versatile medium-duty, hot water
pressure washer that operates completely without a
battery or magneto system.
The Subaru engine, with its revolutionary new internal
200W alternator, linked to Landa’s extra-large SDR unit,
is capable of supplying enough power for
all of the SUV’s electrical functions, including its highefficiency burner assembly. This eliminates the need for
a battery and for belts and pulleys used in maintenanceintensive magneto systems.
• Pump: Landa Pump, direct-drive, heavy duty
• Gasoline Engines: 6-7 HP Subaru
Features
Standard
Variable Pressure Wand
●
Adjustable Thermostat
●
Optional
N/A
❍
Stainless Steel Coil Wrap
Mag Wheels
❍
Float Tank with Metering Valve
❍
Vibration Isolated Engine
❍
The SUV stands only 39" high with a ship weight of only
380 lbs. (6 HP model) and 385 lbs. (7 HP model)
Part No.
GPM
PSI
Pump RPM
HP
Engine
Start
SUV3-20124
SUV3-24124
2.5
2.7
2000
2400
3400
3400
6
7
Suburu
Suburu
Recoil
Recoil
LANDA
5
PRESSURE WASHERS
Hot Water Stationary
Electric-powered, Natural gas / LP heated
VNG:
Industry’s most rugged natural gas line with remote station capability
The VNG is the patriarch of the
natural gas-heated pressure washers.
Created in 1987, the VNG features a
super-efficient vertical coil, burner
assembly and remote station option—
serving as the standard for natural gas
pressure washers in the industry.
The VNG also comes with an energyefficient, burner and 24V electronic
ignition for pilot-free operation. Its
belt-drive, Landa Pump has cast-iron
pulleys and dual-groove belts for a
cooler operation.
Features
Standard
Time Delay Shutdown
●
Electronic Ignition
●
Wet Steam Combination
●
Adjustable Thermostat
●
Float Tank with Metering Valve
●
Modulating Thermostat
●*
Optional
Remote Operating Station
❍
LP Gas Conversion
❍
N/A
*6 & 8 gpm units only
Part No.
GPM
PSI
Pump RPM
HP
BTU
Voltage
Amps
VNG4-20024A
VNG4-30024A
VNG6-30024B**
VNG8-30024B**
VNG10-20024B
4.0
3.9
6
8
10
2200
3000
3000
3000
2000
930
775
1525
1370
1630
6.2
8.2
15
20
20
400,000
400,000
600,000
750,000
935,000
230 1ph*
230 1ph*
230 3ph*
230 3ph*
230 3ph*
27
36
39
52
46
*Models available in other electrical configurations.
**6 & 8 gpm units use a modulating thermostat for
optimum heat efficiency and performance especially
suited for multiple gun applications.
Available options: Auto start/stop,
draft diverter, LP conversion, remote
operating stations (up to 3 separate
stations)
Electric-powered, Natural gas / LP heated
VHG:
Economical, extra-compact natural gas- or LP-heated pressure washer
For a compact, economical natural
gas model customers turn to the
VHG, which has a footprint of only
24" wide and 53" long. The VHG 6-3
& 8-3 are 35" wide and 66" long. It,
too, features a Schedule 80 Duracoil,
a belt-drive, Landa Pump, and antisyphon detergent metering.
Shown with optional hose reel and stainless
steel coil wrap and cabinet cover
Now
With Optional...
WIRELESS
REMOTE
OPERATION
6
LANDA
Features
Standard
Float Tank with Metering Valve
●
Time Delay Shutdown
Electronic Ignition
Remote Operating Station
LP Gas Conversion
Optional
N/A
❍
❍
❍
❍
Part No.
GPM
PSI
Pump RPM
HP
BTU
Voltage
Amps
VHG3-11024D
VHG4-20024A
VHG4-22024A
VHG4-30024A
VHG5-30024B
VHG6-30024B**
VHG8-30024B**
2.5
3.5
4.0
4.0
4.8
6.0
8.0
1000
2000
2200
3000
3000
3000
3000
1075
1175
835
850
1035
1525
1370
2
5
6.2
8.2
10
15
20
245,000
350,000
400,000
400,000
480,000
600,000
750,000
120 1ph
230 1ph
230 1ph*
230 1ph*
230 3ph*
230 3ph
230 3ph
20
25
27
36
29
39
52
*Models available in other electrical configurations.
**VHG 6-3 and VHG 8-3 are 35" wide and 66" long
and have electronic ignition standard
The innovative LanCom wireless remote
system allows an operator to turn on and
off the pump, burner and detergent from
up to 300 feet away. The remote signal
can even pass through walls giving the
operator maximum flexibility for remote
operation of any VHG model.
Available options: Wireless remote
control, auto start/stop, electronic
ignition, draft diverter, LP conversion,
remote operating stations (up to 3
separate stations), and stainless steel
cover wrap and skirt
Hot Water
PRESSURE WASHERS
Electric-powered, Electric-heated
EHW:
All-electric model is perfect for hot water indoor cleaning — no noise, no fumes
The EHW is ideal for in-plant cleaning needs. Just plug it
in and get hot water...no noise, no fumes. It can be located
under a stairway or inside a closet. Its unique design
features a heating coil immersed in a tank of hot water
so the heating elements never touch the pressurized
water, reducing scale build up and maintenance.
Features
A layer of oil sits atop the enclosed tank of water for
additional heat retention and prevention of evaporation.
Hot water spray is generated on demand by simply
pulling the spring-loaded trigger.
• Pump: Landa Pump, belt-drive, industrial grade
• Electric Motor: 6.2 - 7.5 HP Baldor
Standard
Automatic Start / Stop
●
Stainless Steel Coil
●
Low-Water Flow Switch
●
SS Variable Pressure Wand
●
Tri-Lingual Warning Labels
●
24" Hose Safety Guard
●
Submerged Heating Elements
●
Optional
Part No.
GPM
PSI
Pump RPM
HP
Voltage
Amps
KW
EHW4-20024C
EHW4-30024C
4.2
3.5
2000
3000
935
800
6.2
7.5
460 3ph
460 3ph
55
59
40.5
40.5
Hot Water Generators
Electric-powered, Diesel / Oil-heated
HS:
Attaches to a cold water pressure washer to convert it to a hot water pressure washer
The HS is a portable unit that attaches to a cold water
pressure washer and converts it into a hot water cleaning
machine. The cold water pressure washer sends the highpressure spray into the HS generator which heats the water
before dispatching it to the wand.
This model has some of the same features of other Landa
hot water models, including tubed, pneumatic tires, 36'
electrical cord and Schedule 80 heating coil that is backed
by a 5-year warranty and protected by an aluminized steel
inner wrap.
• Pump: None
• Electric Motor: .2 HP Baldor
Features
Standard
Optional
●
Tubed Pneumatic Tires
❍
Stainless Steel Outer Wrap
High-Efficiency Burner
●
10-Gauge Steel Chassis
●
Tri-Lingual Warning Labels
●
Part No.
GPM
PSI
HP
Voltage
Amps
HS-3000
up to 6
3000
420,000
120 1ph
5
Natural gas powered, Natural gas / LP heated
NG:
Attaches to a cold water pressure washer and heats the water using natural gas or propane
NG-3000LM
Shown with optional
support table
The NG is a stationary unit that attaches to a cold water
pressure washer and converts it into a hot water unit.
Because it is heated by natural gas or liquid propane
the NG is ideal for indoor cleaning with hot water.
• Modulating Thermostat (LM unit only)
• Pump: None
• Electricity: None
There are two models to accommodate the different flow
rates of cold water washers. Both have many high-quality
features including Schedule 80 vertical heating coil with
aluminized steel inner wrap, high-efficiency burners
with fused transformer and millivolt ignition and standing
pilot and powder coat finish for added protection.
Features
Optional
●
❍
LP Conversion
High-Efficiency Burner
●
10-Gauge Steel Platform
●
Tri-Lingual Warning Labels
●
The NG 3000LM utilizes a modulating thermostat to provide efficient stable hot water at high volumes even under
multiple gun applications.
Part No.
NG-3000
Standard
Safety Rupture Disk
NG-3000
NG-3000LM
Fuel
PSI
BTU
Natural Gas
Natural Gas
3000
3000
420,000
750,000
Available options: LP conversion, draft diverter, support table for NG-3000LM
LANDA
7
PRESSURE WASHERS
Cold Water • Belt-Drive
Gasoline / Electric-powered, Belt drive
MP / MPE:
Extra-high pressure models with cleaning power of up to 5000 PSI
No gasoline-powered cold-water pressure washer delivers
more blasting power than the MP. Powered by a 13 and
24 HP Honda engine, coupled to a tri-plunger, belt-drive
Landa Pump, the MP delivers an unsurpassed cleaning
power of up to 5000 PSI. The MP is commonly used to
remove salt-water barnacles or blast heavy dirt loads from
field equipment. It’s heavy-duty roll cage design, with lifting bar, makes it ready for the toughest applications.
• Pump: Landa Pump, belt-drive, industrial duty
• Engine / Motor: Honda / Baldor
Features
Standard
Steel Roll Cage w/ Lifting Beam
●
Powder Coat Finish
●
13" Tubed Pneumatic Tires
●
50' Hose 6000 PSI Rated
●
Optional
Part No.
GPM
PSI
Pump RPM
HP
Engine
Start
Axle
MP-373534
MP-455034E
3.7
4.5
3500
5000
1185
1845
13
24
Honda
Honda
Recoil
Electric
Single
Tandem
MP-455034E
The MPE is the electric-powered version of the MP with
all of the same high-quality features including heavy-duty
steel roll cage with lifting beam and insulated high-pressure
wand with trigger gun.
MPE
Part No.
GPM
PSI
Pump RPM
HP
Voltage
Amps
MPE5-50024B
MPE5-50024C
5.0
5.0
5000
5000
1900
1900
20
20
230 3ph
460 3ph
48
26
Available option: Hose reel kit
Gasoline / Electric-powered, Belt drive
PG / PE:
Super-duty, portable, belt-drive models for constant cleaning
The PG is the workhorse of Landa’s cold water pressure
washer line with its belt-drive, industrial Landa Pump
and Honda or Vanguard gasoline-powered engines with
E-Z start valve. As with all of Landa’s belt-drive models,
the PG uses notched V-belts and cast iron pulleys, which
produce a cooler operation for longer belt life. Unique
twin-rail design allows for easy adjusting of belt tension.
Features also include 10-gauge steel chassis with fully
welded seams; powder coat finish; 11/4" chrome-plated
handle and bumper for ease in lifting.
PG
• Pump: Landa Pump, belt-drive, industrial
• Engine / Motor: Honda or Vanguard / Baldor
Features
Standard
E-Z Start Valve
●
SS Variable Pressure Wand
●
13" Tubed Pneumatic Tires
●
Spring-Loaded Feet
●
Thermal Pump Protection
●
Optional
Part No.
GPM
PSI
Pump RPM
HP
Engine
Start
PG4-20324
PG4-35324
PG5-35224E
PG5-35324E
PG4-40324E
4.2
3.7
4.7
4.7
4.0
2000
3500
3500
3500
4000
1300
1185
1185
1185
1090
9
13
16
20
20
Honda
Honda
Vanguard
Honda
Honda
Recoil
Recoil
Electric
Electric
Electric
The PE is the beefiest electric cold water pressure
washer on wheels. Packed with all of the ruggedness
found on the PG, there are four PE models. All have a
36’ electrical cord with GFCI on single phase models.
PE
Part No.
GPM
PSI
Pump RPM
HP
Voltage
Amps
PE3-11024D
PE4-20024A
PE4-30024A
PE5-30024B
2.8
4.2
3.5
4.8
1000
2000
3000
3000
1540
900
800
1060
2
6.2
7.5
10
120 1ph
230 1ph*
230 1ph*
230 3ph*
20
27
36
26.8
*Models available in other electrical configurations.
8
LANDA
Cold Water • Belt-Drive
PRESSURE WASHERS
Electric-powered, Belt drive
SEA:
Super-duty, stationary, belt-drive pressure washers for unlimited usage
The SEA is one of a kind. No other stationary pressure
washer offers so much quality with its belt-drive, industrial
grade Landa Pump, notched V-belts, cast iron pulleys
and twin-rail design for easy adjusting of belt tension.
The cabinet and base plate are made of stainless steel.
It can handle water of up to 175°F. Rubber feet absorb
vibration and time delay shutdown automatically
turns off the machine when not in use.
• Pump: Landa Pump, belt-drive, industrial grade
• Motor: Baldor
Features
Standard
Stainless Steel Cabinet
●
SS Variable Pressure Wand
●
50' Tuff-skin Hose, 6000 PSI
●
Magnetic Starter
●
Vibration Isolators
●
Optional
Part No.
GPM
PSI
Pump RPM
HP
Voltage
Amps
SEA3-11024D
SEA4-20024A
SEA4-20024B
SEA4-20024C
SEA4-30024B
SEA4-30024C
2.8
4.2
4.2
4.2
3.5
3.5
1000
2000
2000
2000
3000
3000
1540
935
935
935
800
800
2
6.2
6.2
6.2
7.5
7.5
120 1ph
230 1ph*
230 3ph*
460 3ph*
230 3ph*
460 3ph*
20
28
16
7.2
21.5
10.5
*Models available in other electrical configurations.
Available options: Wall mount bracket assembly,
hose reels, auto start/stop, remote switch, wheel
kit, float tank, stand w/caster wheels
Everything but the
kitchen sink...
There’s so much to see and
learn about high-pressure
cleaning when you visit the
web site of North America’s
largest manufacturer of
industrial pressure washers
and aqueous parts washers:
www.landa.com
LANDA
9
PRESSURE WASHERS
Cold Water • Direct-Drive
Gasoline / Electric-powered, Direct drive
PC / PDE:
Heavy-duty, direct-drive alternative for serious cleaning
When size and weight are factors, the compact,
direct-drive pressure washers are the preferred choice.
The gas-powered PC and electric-driven PDE deliver a
powerful cleaning punch with their heavy-duty pumps.
Rubber feet absorb vibration and the E-Z start valve
relieves pressure so pull starting the engine is a breeze!
• Pump: Direct-drive
• Engine / Motor: Honda / Baldor
Features
Standard
E-Z Start Valve (Gas Only)
●
10" Tubed Pneumatic Tires
●
Thermal Pump Protection
●
Optional
❍
SS Variable Pressure Wand
PC
Part No.
GPM
PSI
Pump
HP
Engine
Start
PC3-23326
PC3-24324
PC3-27324
PC3-30324
PC4-35324
2.3
2.3
2.5
3.0
3.8
2300
2400
2700
3000
3500
Comet
Landa
Landa
Landa
Landa
5
5.5
6.5
9
13
Honda
Honda
Honda
Honda
Honda
Recoil
Recoil
Recoil
Recoil
Recoil
Available option: Hose reel kits
The PDE is the electric equivalent of the PC with its heavyduty, direct-coupled Landa Pump. All come single phase units
with 36' electrical cord and GFCI for operator safety.
PDE
Part No.
GPM
PSI
Pump RPM
HP
PDE2-11024D
PDE2-15024D
PDE4-20024A
PDE4-30025A*
2.0
1.8
3.5
3.5
1000
1500
2000
3000
3450
3450
3450
1725
1.5
2
5
7.5
*uses AR pump
Engine
Amps
120 1ph
120 1ph
230 1ph
230 1ph**
15
20
20
30
**Also available in 230V or 460V 3 ph
Gasoline / Electric-powered, Direct drive
ZG / ZE:
Most rugged hand held pressure washers on the market today
The ZG & ZE are proof that hand-held pressure washers
can be tough, too. This electric- or gas-powered, cold
water pressure washer has a quality motor direct-coupled
to a Comet axial high pressure pump. The entire electric
unit weighs only 61lbs and comes with 36' of electric
cord with GFCI. The straight-through wand is connected
with 25' of Tuff-Flex hose.
ZE
10 LANDA
Features
Standard
Thermal Pump Protection
●
Ground Fault Circuit Interrupter
●
Stainless Steel Wand
●
25 ft. Wire Braid Hose
●
Optional
Part No.
GPM
PSI
Pump RPM
HP
Voltage
Amps
ZE2-11026D
ZG3-232336
2.0
2.3
1000
2300
3450
3400
1.5
5
120 1ph
(gas engine)
15
N/A
Mobile Wash Packages
TR-6000:
PRESSURE WASHERS
Top-of-the-line dual axle trailer package is the ultimate in mobile high-pressure cleaning
The dual-axle TR-6000 is the premier trailer package
with its extra capacity to carry the largest of skid
pressure washers along with a 330-gallon,
high-density, polyethylene water tank that
comes standard with the trailer.
shown with options
Features
TR-6000
TR-3500
Weight Capacity (lbs)
6000
3300
Water Tank Capacity (gal)
330
200
Double Axle
●
Fuel & Tool Box Option
●
The TR-6000 chassis is made of extra-rugged
2-by-3 inch structural tubing, capable
of transporting loads of up to 6,000 lbs.
Full Skid Pressure Washer
●
Two 3-Way Ball Valves
●
●
Steel Cage
●
●
The wheel and axle assembly feature leafspring suspension of up to 3,500 lbs per
axle and 14-inch, white spoke wheels.
(Optional chrome wheels and fenders
are available.)
Recessed Electrical Wiring
●
●
Powder Coat Finish
●
●
1000 lb Swivel Jack
●
●
A powder-coated epoxy black finish gives the entire package added weather
protection as well as a first-class look.
The entire trailer package is completed by selecting the trailer size, then
adding a Landa pressure washer (see pages 3-4). Finally, add the options
listed below.
TR-6000
COMMON FEATURES OF BOTH TRAILER PACKAGES
• 1,000 lb. swivel jack with a 25/16"
ball coupler for quick and easy
hook up of the trailer
• 12" access port, 11/2" drain valve,
3
/4" float valve and a 50-mesh inlet
filter for water tanks
• Two 3-way ball valves for easy
switching of the water flow from
the holding tank to a faucet
• All electrical wiring is recessed
within the tubular frame
• Two 5/16" chains for safety
TR-3500:
Part No.
Axle
Max Gross Vehicle Wt
Water Tank
TR-6000
Tandem
6000 lbs
330 gal.
Available options: Lunette eye coupler, brakes, hose
reel kit, mounting kit, fuel tank and tool box, vinyl skid
covers, chemical rack, chrome wheel and fender, work
lamp, signage plate
• Lighted license plate holder
and recessed tail lights
Compact—yet roomy—single axle mobile high-pressure cleaning system
The TR-3500 is a rugged single-axle trailer, capable of carrying four series of Landa’s portable,
self-contained, hot-water pressure washers. The TR-3500 is made of the same, durable 2-by-3 inch
structural tubing, capable of sustaining a total weight of 3,300 lbs and is further protected by a black,
powder-coated epoxy giving the entire package added weather protection.
shown with options
Part No.
Axle
TR-3500
Single
Max Gross Vehicle Wt
Water Tank
3300 lbs
200 gal.
Available options: Lunette eye coupler, brakes, hose
reel kit, mounting kit, fuel tank and tool box, vinyl skid
covers, chemical rack, chrome wheel fender, work
lamp, signage plate
TR-3500
LANDA 11
Hot Water Front Load
PARTS WASHERS
Patented Spin Wash Technology
POWERED BY: ELECTRICITY • HEATED BY: ELECTRICITY
SJ-15: Top-Load with Water-Propelled Spray Bar
The SJ-15 is an industrial-grade, top-load autoPRODUCT
matic aqueous
of the
YEAR
parts washer
capable of handling parts as large as
an automobile transmission.
Made of durable 12 gauge steel coated
with a heat- and moisture-resistant liquid paint with an automotive finish, the
SJ top-load parts washers has 23 preNOW WITH
cision spray nozzles, a seal-less vertical
AUTOMATIC
pump, an extra large 90 gallon water
OIL SKIMMER
tank, and a high-efficiency calrod heating element
protected by an incoloy sheath for long life.
Other features include:
• Sealed safety stop switch and low-water shutdown protection;
• Adjustable thermostat, 50 - 175°F;
• Easy-to-clean stainless steel strainer for removing floating debris;
• 1-hour wash timer for protection against neglect and 7-day programmable timer for energy efficiency;
• Optional caster wheels for easy moving around the shop; and
• 11/2-inch drain port for disposing of wastewater and sludge.
Plant Engineering
Part
Number
GPM
PSI
SJ-15A
37
30
Basket
Working
Dimensions Height
32" x 21"
18"
Load
Volt/Phase/
Capacity
Amps
Ship
Weight
350 lbs
773 lbs
230/1/38*
C
*Models available in other electrical configurations.
Available options: Auto fill, stainless steel, detail brush, timers, and
many more
• Water Pump: 3 HP, Vertical Seal-less
• Heater: 6 kW (SJ-15), 4.5 kW (SJ-10)
• Tank Capacity: 90 Gallons (SJ-15)
• Size: 49"H x 53"W x 48"D (SJ-15)
Conventional Parts Washer Sink
HEATED BY: ELECTRICITY
REBEL™: Manual Stainless Steel Hot-Water Parts Washer for Solvent-Free Cleaning
The Landa Rebel™ is the most rugged hot-water
parts washer sink on the market with its 304
stainless steel construction and industrialduty, time-tested, vertical seal-less pump
that eliminates the need for an expensive filtration system.
Shown with
optional work lamp
From the painted stainless steel
cabinet with a two-step polyurethane finish used in the automotive industry to
the stainless steel automatic oil skimmer
disc and from the low-water shutoff protection to the water-resistant metal control panel, the Rebel has been
designed to hold up under the
AUTOMATIC
toughest of environments.
LOW-WATER
SHUTOFF
Besides being compact the
Rebel is mobile. With four
PROTECTION
industrial-grade casters and a
high-pressure, trigger spray gun, the
Rebel can be wheeled under a raised vehicle to rinse the underside without having
to remove the parts!
The Rebel’s unique recessed shelf on the backside provides protection for motorized parts. Options include a magnetic tool holder, easy-to-adjust metal work lamp,
automatic water fill and power brush. The Rebel is backed by a one-year warranty.
12 LANDA
Part
Number
GPM
PSI
Heating
Element
Load
Capacity
Volt/Phase/
Amps
Ship
Weight
REB-3626D
2.5
8
1.25kW
250 lbs
120/1/9.5
303 lbs
Available Options: Automatic water fill, filtration system,
magnetic tool holder, power brush, 24-hour heater timer,
work light, Rebel washer detergent,
and many more
• Water Pump: 1/6 HP Vertical seal-less
• Sump Capacity: 21 gallons
• Sink Dimensions: 10"H x 36"W x 26"D
• Cabinet Dimensions: 42"H x 39"W x 29"D
Hot Water Top Load
PARTS WASHERS
Power Scan Wash Front-Load Model
POWERED BY: ELECTRICITY • HEATED BY: ELECTRICITY
Power Scan Wash:
Front-Load Model with Unique Oscillating Spray Bar That Cleans 50+% Better
Landa’s Power Scan Wash is the only
automatic aqueous parts washer with
an oscillating spray bar delivering 50+%
more effective cleaning than conventional parts washer by increasing the
wash dwell time and by creating many
more angles at which the hot water
spray hits the revolving parts.
Part #
The vertical spray bar, with six ziptip, quick-disconnect spray nozzles,
oscillates back and forth as the
parts, located in the rotating
turntable basket, pass by the
hot water spray that is constantly flooding the parts from
the side, above and below.
GPM
Basket Working V/Ph/Amp
Load
PSI Diameter Height Electrical Capacity
Ship
Weight
PSW-2632A
50
45
26"
32"
230/1/38
800 lbs
890 lbs
PSW-2632B
50
45
26"
32"
230/3/23
800 lbs
890 lbs
PSW-2632C
50
45
26"
32"
460/3/11
800 lbs
890 lbs
PSW-2632F
50
45
26"
32"
575/3/9
800 lbs
890 lbs
PSW-2632G
50
45
26"
32"
208/1/42
800 lbs
890 lbs
PSW-2632H
50
45
26"
32"
208/3/25
800 lbs
890 lbs
PSW-3040A
50
45
30"
40"
230/1/38
800 lbs
990 lbs
PSW-3040B
50
45
30"
40"
230/3/23
800 lbs
990 lbs
PSW-3040C
50
45
30"
40"
460/3/11
800 lbs
990 lbs
PSW-3040F
50
45
30"
40"
575/3/9
800 lbs
990 lbs
PSW-3040G
50
45
30"
40"
208/1/42
800 lbs
990 lbs
PSW-3040H
50
45
30"
40"
208/3/25
800 lbs
990 lbs
• Water Pump: 3 HP, Vertical Seal-less
• Heater: 6 kW
Another unique design feature is the side-mounted component platform so the unit
can be pushed up against a wall to conserve space.
Standard features include: low-maintenance vertical seal-less pump for consistent
hot water flow; automatic oil skimmer; timers for pre-heating the water and automatic one-hour washing; fold-down intermediate spray manifold; pull-out debris
tray; low-water shut-off; gear motor-driven turntable; containment ring; a parts tree
and a parts basket; 12 quick-disconnect nozzles for ease in cleaning; and an oil
drain container.
• Tank Capacity: 52 - 64 Gallons
• Dimensions: 68"H x 61"W x 34"D (2632 models)
76"H x 65"W x 38"D (3040 models)
Side-mounted spray bar oscillates
back and forth hitting the parts
on the rotating turntable at many
more angles than conventional
front-load parts washers and
creating longer dwell times
of the cleaning solution
Parts Washer Accessory: Minimize Disposal Costs
FOR: ALL PARTS WASHERS
PK-100D:
Cleans Tanks and Extends Life of Wash Water
Landa’s PK-100D PortaKleen is an economical and efficient way to process
and extend the life of wastewater from a parts washer.
Components include a sump pump and hand truck with filter bag.
The sump pump is placed at the bottom of the parts washer tank where it
suctions out the wastewater and passes it through the bag filter in a metal housing
fixed to a hand truck.The water then flows into a 55-gal. drum (not included)
where it is stored. A wet vac (not included) can then be used to remove residual
sludge from the tank.
Shown with wet vac
and 55-gal. drum
(not included)
Finally, the water is returned to the tank, passing it one more time through the
bag filter, thus extending the life of the wastewater and minimizing disposal costs.
The bag is removed from the canister and allowed to dry for easy disposal.
Part
Number
PK-100D
Flow Rate
Pump
Volt/Phase/Amps
40 gpm
1/3 hp
120/1/15
LANDA 13
Hot Water Front Load
PARTS WASHERS
Extra-Large Capacity Front-Load
POWERED BY: ELECTRICITY • HEATED BY: ELECTRICITY
LC:
Top-Of-The-Line Automatic Aqueous Parts Washers for Extra-Heavy and Large Loads
There is no line of front-load, automatic parts washers with the
cleaning versatility of Landa’s LC (large capacity) with 48 variations to
meet your cleaning needs.
Besides a wide variety of electrical configurations, the LC models
include optional stainless steel and fresh-water rinse upgrades.
All models come with the LC’s unique roll-in door design reducing the
amount of floor space used by traditional units with swing out cabinet
doors.
The LC front-load parts washers are capable of handling loads of up to
60 inches (5 feet) in height with a turntable diameter of up to 60 inches and load weights of as much as 5,000 lbs., plus optional upgrades
of up to 72 inches working height.
Built with rugged steel and coated by a heat- and moisture-resistant
paint with an automotive finish, the LC models provide focused cleaning with 18 to 26 precision spray nozzles focused directly onto the
parts in the rotating turntable. A conveniently located intermediate
spray bar lifts up or down to position the spray
closer to the parts being cleaned.
Other features include:
• Adjustable thermostat and low-water shutoff protection;
• Built-in stainless steel oil skimmer and drain container for
automatic disposal of floating oils in the sump tank;
• 1-hour wash and 12-hour heater timer for operating convenience
and energy savings;
• High-efficiency calrod heating element protected by an incoloy
sheath;
• Durable, time-tested 5 to 7.5 HP vertical seal-less pump with optional upgrades,
including 10 HP for the largest models;
• Pull-out debris screen for preventing foreign objects from falling into
the sump tank;
• Easy-reach sump access panel for convenience in cleaning tank with
double-pitch floor;
• Recessed base to allow ample foot clearance while loading and
unloading parts;
• Front-access drain cap for ease in flushing sump tank; and
• Comes with oil drain container, parts tree, parts basket and containment rings.
Shown with optional sump
sweep and filtration.
Part
Number
GPM
PSI
Basket
Dimensions
Working
Height
Load
Capacity
Volt/Phase/
Amps
Ship
Weight
LC-3636B
LC-3648B
LC-4860B
LC-6048B
110
200
200
200
50
50
50
50
36"
36"
48"
60"
36"
48"
60"
48"
2500 lbs
2500 lbs
2500 lbs
5000 lbs
230/3/51*
230/3/58*
230/3/67*
230/3/110*
1707 lbs
1869 lbs
2288 lbs
2681 lbs
*Models available in other electrical configurations
Available Options: Stainless steel, rinse,
auto water fill, detail brush, timers and
many more
• Pump: Vertical Seal-less, 5 HP (3636), 7.5 HP (3648, 4860, 6048)
• Heating Element: 15 kW (3636, 3648), 18 kW (4860) and 36 kW (6048)
• Sump Capacity: 113 gal (3636, 3648), 156 gal (4860) and 275 gal (6048)
• Dimensions: 83"H x 57"W x 65"D (3636), 95"H x 57"W x 65"D (3648)
106"H x 66"W x 75"D (4860), 96"H x 79"W x 90"D (6048)
14 LANDA
Hot Water Top Load
PARTS WASHERS
Conveyor Parts Washer
POWERED BY: ELECTRICITY • HEATED BY: ELECTRICITY
MM:
Single-Stage, Pass-Through Parts Washer for Integrating Into an Assembly Line
Landa has introduced the MM, a compact, single-stage,
conveyor parts washer for manufacturing plants and other applications where in-line cleaning
is needed.
Featuring a steel mesh belt 16 inches in width with a tunnel
height of 10 inches, this automatic hot water parts washer can
handle a broad array of parts that are commonly found in an
assembly line or in-line applications.
The adjustable conveyor speed of 0 to 8 feet per second allows
the operator to slow down or speed up the cleaning process and
thus adapt to the level of grease and grime on the parts.
There are six Mini-Max models, with a variety of electrical and
stainless steel configurations, all driven by a 5 hp vertical sealless pump.
The wash tunnel features a 360-degree spray manifold and is
accessed by a convenient lift-up lid, which has a built-in safety
device that shuts down the parts washer if the lid is opened.
Other safety or protection devices include an automatic water fill
and low-water shutoff system, fused lock out for main disconnect
in box on the rear of the equipment and a Y-strainer in the plumbing to protect the nozzles (not present when optional filtration
system is in place).
360°
The water is heated by three 9 kW heating elements, raising the
water temperatures to as much as 140°F.
SPRAY ACTION
A conveniently located, water-resistant control panel contains a
push button start/stop button, analog conveyor control and temperature control.
Other features include:
• A slide-out debris tray with 20-mesh screen that makes easy
work of removing large particles;
• A sloped tank design and capped pipe outlet for convenience in
draining the wastewater;
Part
Number
GPM
PSI
Belt
Width
Heating
Element
Load
Capacity
Volt/Phase/
Amps
Ship
Weight
MM-1610B
110
45
16"
3 x 9 kW
2500 lbs
230/3/77*
1234 lbs
*Models available in other electrical configurations.
Available Options: Stainless steel, filtration system, timers, and many more
• A fully automated, 12-inch stainless steel disc oil skimmer;
• Locking casters for use in moving the Mini-Max about the shop
as needed.
• Wash Tunnel Height: 10"
• Water Pump: 5 HP Vertical seal-less
• Conveyor Belt Speed: Adjustable, 0-8 ft. per minute
• Conveyor Belt Mesh: 1" x 1"
• Dimensions: 62"L x 58"W x 58"H
LANDA 15
PRESSURE WASHERS ACCESSORIES
Landa Water Jet Surface Cleaner
■ Fatigue-Free Trigger Handle:
Water Jet is the Mercedes-Benz of the surface cleaning market. It handles
easier, cleans faster and holds up better under the toughest conditions.
Turns the unit off and on for
operator safety.
The Water Jet’s spray bar spins at 2000 RPM and can be adjusted to blast
concrete but not dig up asphalt or wood. The rotating bar and shaft are made
of stainless steel with sealed precision guide bearings for low maintenance
and a long life.
■ Tangle-Free Hose: Swivel connection
keeps hose from tangling while operating.
■ Holster-Mounted Gun: Keeps
A holster-mounted trigger gun and insulated wand make for convenient
spot cleaning in hard-to-reach places.
trigger gun close by for quick spot
cleaning of hard-to-reach places.
■ Variable Height Adjustment:
Other features include:
Allows you to raise or lower
the spray bar so you can blast
off concrete, but not dig up
softer surfaces.
• Made of durable, rust-free polyethylene, for easy handling,
but weighs only 45 lbs.
• Pneumatic tires on steel wheels make for easy maneuvering on all surfaces;
• Easy-to-clean, in-line filter keeps spray nozzles from plugging;
■ Corrosion-Free:
• Auto switching between surface cleaner and holster-mounted wand;
Rotating bar and shaft
are made of stainless
steel with sealed
precision guide bearing
for low maintenance
and long life;
backed by
1-year warranty.
• Tri-lingual warnings and operating instructions;
• Collapsible handle for ease in transporting.
■ Built to Last: Self-lubricating rotary
union is protected in a stainless steel
housing and features industrial strength
ball bearings and tungsten carbide seat
for longer life.
2-11058
Rotary Union
Part No.
Description
30-585
95-0728030
2-11058
81-21007L
81-21227
Water Jet Surface Cleaner
Spray Angle Adjustment Tool
Rotary Union
Actuator Valve Assembly
Repair Kit, Actuator Valve
■ Easy to Handle:
Swivel caster wheel,
sealed for added
protection against
debris, makes for
easy maneuvering
into corners and
tight spaces.
• Rating: Super-duty
• Recommended Usage: Heavy
• Attaches to: Any hot- or cold-water pressure washer
with minimum of 2000 PSI, 190°F
• Max PSI: 4000
• Max Temp: 200°F
• Cleaning Width: 20"
Landa Cyclone Surface Cleaner
The economy model flat surface cleaner, Landa’s Cyclone is the pricecompetitive surface cleaner with many of the same design features that have
made the top-of-the-line Water Jet so popular.
The Cyclone’s non-adjustable spray bar also spins at 2000 RPM and seemingly
glides across flat surfaces riding on the evenly balanced tubed pneumatic tires
and swivel caster wheel.
The rotating bar is made of stainless steel with medium-duty sealed precision guide
bearings.
Other features include:
• Durable, rust-free polyethylene spray housing;
• Fatigue-free trigger handle turns unit on/off for operator safety;
• Tangle-free hose connection for ease of maneuvering; and
• Tri-lingual operating instructions for added liability protection.
16 LANDA
Part No.
Description
30-587
2-11055
Landa Cyclone Surface Cleaner
Rotary Union
• Rating: Heavy-duty
• Recommended Usage: Medium
• Attaches to: Any hot- or cold-water pressure
washer with minimum of 2000 PSI, 190°F
• Max PSI: 3500
• Max Temp: 200°F
• Cleaning Width: 20"
Your One Stop Shop for Parts
PRESSURE WASHERS ACCESSORIES
Whisper Wash Flat Surface Cleaners
• Saves labor, fuel & water
• Eliminates overspray and zebra striping
• Use with conventional pressure washers
Applications:
• Service Stations
• Pool & Patio Decks
• Warehouse Floors
• Loading Docks
• Parking Lots
• Balanced spray bar
• Quick connection
• 2,000 to 4,000 PSI
• Use with cold or hot water
• 2500 RPM
The Classic
•
•
•
•
•
Public Facilities
Restaurants
Gondolas
Stadiums
Marina Docks
•
•
•
•
Driveways
Sidewalks
School Yards
And lots more!!
•
•
•
•
•
•
•
The “Maxima 36”
•
•
•
•
•
Portable Breakaway Handle
212°F
4-10 GPM
2500 RPM
Dimensions:
Cover: 36"
Handle: 77"
• Weight 37 lbs
Part No.
Description
343636
Whisper Wash Maxima 36
Portable breakaway handle
ABS Housing
2" nylon brush
4-10 GPM
212°F
Dimensions: 77" x 19" x 12"
Weight 28 lbs
Part No.
Description
343605
Whisper Wash Classic
The Ultra Clean WW
•
•
•
•
•
•
•
•
ABS Housing
Four 3" casters
Powder coated handle
3-6 GPM
185°F
2500 RPM
Dimensions: 19" x 43" x 9"
Weight 23 lbs
The “Big Guy”
• Powder coated aluminum housing
• Oversized, self-lubricating twin
thrust bearings
• Choice of 2 or 4 nozzles
• 10" pneumatic tires, 4" caster
• Crafted with durable stainless
steel & aircraft aluminum
• 4-10 GPM
• 212°F
• Dimensions: 28" x 44" x 12"
• Weight 48 lbs
Part No.
Description
343606
343607
Whisper Wash Big Guy 2 Nozzles
Whisper Wash Big Guy 4 Nozzles
Part No.
Description
343604
Whisper Wash Ultra Clean WW
The Ultra Clean HC
•
•
•
•
•
•
•
ABS housing
2" nylon brush
Powder coated handle
3-6 GPM
185°F
Dimensions: 16" x 43" x 9"
Weight 19 lbs
Ground Force
•
•
•
•
•
•
•
Flip and fold handle
Choice of 2 or 4 nozzles
Rebuildable swivel
4-10 GPM
212°F
Dimensions: 24" x 60" x 9"
Weight 29 lbs
Part No.
Description
343608
Ground Force
Part No.
Description
343603
Whisper Wash Ultra Clean HC
Repair Kits
Part No.
Description
092105
092108
092109
092110
Seal Kit; Classic, Big Guy & Ground Force
Seal Kit; Ultra Clean
Swivel Kit; Ultra Clean
Swivel Kit; Classic, Big Guy & Ground Force
NOTE: 251119 - 2.5 x 25° 1/4" Nozzle Fits All Models
LANDA
17
PRESSURE WASHERS ACCESSORIES
SideWinder Surface Cleaner
•
•
•
•
NEW
•
2-Year Mfg.
Warranty
•
•
•
2000-4000 psi
12 GPM max
210°F
Available in collapsible
and fixed models
Available in both black and
red
Heavy duty aluminum
handle
20” deck
19 lbs.
Mosmatic Turbo
Surface Cleaner & Duct Cleaner
Delivers high-pressure performance with low maintenance for any hot or cold
pressure washer. Completely stainless steel design makes this the toughest
surface cleaner available in the pressure cleaning market.
Swiss engineered with high RPM Swivel features
reinforced self-lubricated stainless steel ball bearings and dual spring based carbide seal bushings
for long-lasting operation under tuff conditions.
Part No.
Description
343690
343690R
343691
343691R
SideWinder 105F Fixed Black
SideWinder 105F Fixed Red
SideWinder 105C Collapsible Black
SideWinder 105C Collapsible Red
• 4000 PSI
• 250°F
Designed as an accessory for use with high
pressure pumps or pressure washers. Cleans
Ducts, Chutes, Vents, Restaurant Exhausts,
Tanks, etc.
• 4000 PSI
• 250°F
• 4000 PSI
• Fits 1/4" wand
• Requires (4) 1/4" nozzles
Part No.
Description
343615
Water Broom 16"
A “Must Have” tool for every serious mobile cleaner, cleans areas other
surface cleaners can’t reach.
Part No.
Description
PSI
411171A
411156
411155
Turbo Cleaner
Duct Cleaner TXR-2s, Adjustable
Duct Cleaner TXR-2s, Fixed
4000
4000
4000
•
•
•
•
•
Tough - durable - lightweight
No cracking - splintering
No kinks - dents
Safer around electrical hazards
Easy-Twist cam lock extension
Part No.
• Premium Quality Mosmatic Swivel
• Steel 1/4" Q.C. Inlet-Quick Connect
to Guns, Lances Injectors, High
Pressure Filters or other accessories
• Height 7.5" - OD 14.5"
• Light Weight - 3.2 lbs
• Size 5 Nozzle Equivalent
• Two Standard 1/8" 3.0 x 40°
replacement nozzles
• 2.5 GPM @ 1000 PSI
• 4.0 GPM @ 2500 PSI
• 4.4 GPM @ 3000 PSI
Description
343610
092175
Thunderdome Base Unit
Repair Kit
NOTE: Does not include gun-hose-lance-etc.
Self rotating and feeding stainless steel triple
bearing system for constant easy turning. Nozzle
holders are 1/8" NPTF. Nozzles are sold separately.
• 2lbs
• Inlet Ports:
3/8" NPTF
Fiberglass “Super Handles”
Thunderdome Flat Surface Cleaner
Part No.
• 6.5lbs
Duct Cleaner
Water Broom 16"
18 LANDA
Ideal for Pressure Washer Contractor to clean
Walls, Ceilings, Public Facilities, Tile Floors and
other hard to reach areas.
343690
343691
• Super heavy-duty aluminum
alloy threads
• Standard 3/4" Acme thread fits:
Brooms, brushes, utility tools
• Optional reduction adapter for 3/4"
Description
Super Handles
306864
48" Length (4 ft)
306865
60" Length (5 ft)
306866
72" Length (6 ft)
Super-Extension Handles
306868
4 ft to 8 ft Ext
306869
6 ft to 12 ft Ext
306870
8 ft to 16 ft Ext
075271
Threaded Adapter
Water-Sweepers
• Rolls on four wheels
• Plastic cover with brush spray breaker
• Uses four Brass 1.5 x 80° V-jet nozzles
(254620, below)
• Rated for 1,500 PSI w/ Brass nozzles
• Rated for 2,500 PSI w/ SS nozzles (non-hardened)
Part No.
Description
343602
254620*
ST-95 Water Sweeper
Nozzle 1/8" #1.5 x 80° (SS)
*Longer lasting replacement nozzle
Your One Stop Shop for Parts
PRESSURE WASHERS ACCESSORIES
Brushes
Nozzle
Sandblast Kit - Carbon
Industrial Grade
Rotating Brush - Natural Bristle (soft) used for painted surfaces. Nylon
A Venturi orifice creates a uniform blast pattern, doubles sand velocity
and produces up to 45% more work with 20% less sand.
Bristle (stiff) used for removing scum and grime on fiberglass boats, etc.
• Solid Carbide blast nozzle
• Venturi orifice design
• Volume control sand feed valve
• Up to 3500 PSI
• Up to 750 lbs of sand per hour
Kit contents: Sand head
w/ carbide nozzle, 20" lance,
Sand probe, 13-1/2' sand hose,
Sand flow regulator valve.
• Internal nozzle = size 20
• Max Flow 8 GPM
Part No.
Description
Brush Unit Complete
1-20
Natural
1-2005
Nylon
Replacement Brushes
306927
Natural
1-22
Nylon
Kits
Orifice
Size
4.0
4.5
5.0
5.5
Truck Wash Brush
• Flag-tipped
• Firm bristle
• ACME thread for Super Handles,
Flow-Thru lances or broom handles
• Trailer Brushes – (2-1/2" Bristle
w/Bumper)
Part No.
Description
306800
306818
306824
306860*
2-1/2" x 10"
2-1/2" x 18"
2-1/2" x 24"
60" Flow Thru Lance
Description
086941
Solid Carbide Nozzle only
Description
306812
Deck Scrub Brush
6.0
7.0
10.0
Orifice
Size
• Trimmed for cleaning hard-to-reach areas
• 10" molded polypropylene foam block
does not warp or absorb water
• Stiff polypropylene bristle
for aggressive cleaning
• Excellent chemical resistance
• Use with threaded handle
• Not a Flow Thru
Description
306802
306810
Flag Tip Window 10"
“Extra-Soft” 10" w/ Bumper
Orifice
Size
3.0
4.0
4.5
5.0
5.5
6.0
253316
253330
253338
253346
253355
253365
6.5
7.0
7.5
8.0
9.0
10.0
253375
253383
253392
253400
253415
253456
Professional Sandblast Head
• Long-wearing Carbide
sand nozzle
• 1/4" FPT water inlet
• 200°F
• 10 GPM
• 3500 PSI
• Sand probe weight
6 oz, length 16"
• Head weight 13 oz
Nozzle
Size
3.5
4.0
4.5
5.0
Tractor Brush - Soft for gentle cleaning of fine finishes.
Part No.
391556X
391557X
391560X
Tip-Jet Nozzles for water nozzle replacement or for system volume changes.
*with Acme Thread & Garden Hose Attachment
Part No.
391554X
391553X
391555X
391550X
Part No.
Deck Scrub Brush – Over / Under - Unique Heavy-duty Scrub Brush
with Multi-Level/Angle.
Orifice
Size
Nozzle
Size
391631
391632
391633
391634
Part No.
Description
391640
121041
Sand Probe
1/2" ID Polybraid Tubing, 25'
5.5
6.0
8.0
391635
391636
391637
Industrial Sandblaster
Nozzle
Sandblast Kit - Carbide
Industrial Grade
A Venturi orifice creates a uniform blast pattern, doubles sand velocity and
produces up to 45% more work with 20% less sand.
•
•
•
•
5500 PSI Max Working Pressure
10 GPM Max Flow
200°F
10 lbs.
Part No.
Description
084079
Sand Blask Kit DWSDBTK
Working Flow:
4 GPM at 3000 PSI
up to 8 GPM at 5000 PSI
• Carbide Sand Nozzle
• 25' Suction Hose
• Use 1/4" meg 5° Spraytip
• Tips not included, buy
separately
Part No.
Description
391510
092157
251159
251198
251221
251237
251256
Sand Blast Kit
Carbide Sand Nozzle
4.0 x 5° Tip
5.0 x 5° Tip
5.5 x 5° Tip
6.0 x 5° Tip
6.5 x 5° Tip
LANDA
19
PRESSURE WASHERS ACCESSORIES
Landa Industrial Sandblasters
For the extra-tough cleaning jobs, wet-sandblasting is the dust-free solution.
Landa’s sandblasters attach to a hot-or cold-water pressure washer and, using a venturi, mixes sand
or other abrasive media with the high-pressure spray to create enough cleaning power to strip paint off
concrete and barnacles from a ship’s hull.
The sandblasting nozzle is made of tungsten carbide for long life. There are two models—a top-of-theline steel pot (photo at right) with tight-fitting lid or with a probe only.
Other features include:
■ Quick-connect coupler for ease
in attaching sand probe or pot;
■ Valve for metering the flow
of the media;
■ Tubed, pneumatic tires
for easy maneuvering.
4-011211
• Rating: Super-duty
• Recommended Usage: Heavy
• Attaches to: Any hot- or cold-water pressure washer
with minimum volume of 4 GPM
Part No.
Description
4-011201
4-011211
Sandblaster w/ Pot (Carbide)
Sandblaster w/ Probe (Carbide)
4-011201
Landa Sand Nozzle
Pit Cleaner
Tungsten Carbide provides maximum durability for sand blasting application.
Cleaning sludge from the bottom of a collection pit or tank is neither easy nor
fun. But the Pit Cleaner makes it bearable.
• Carbide insert
• Light weight
• Easily changed
Part No.
Description
4-2002
Carbide Sand Nozzle
An extended wand is attached to a cold- or hot-water pressure washer
with a minimum of 1000 PSI. The pressure is channeled
so that it creates a vacuum, capable of suctioning mud
and sludge from the bottom of a pit, tank or even
a pond.
The sludge is deposited into a porous collection
bag, mounted on a hand truck, where the water
drains out and the sludge is allowed to dry
for proper disposal.
30-580
4-41120
30-575
20 LANDA
Part No.
Description
30-575
30-580
4-41120
4-02190003
Pit Cleaner Assembly (as shown w/hose)
Sludge Cart (sold separately)
Sludge Pump Head w/ 05 nozzle installed
Hose, 1-1/2" Spirallite, per foot
Your One Stop Shop for Parts
Foot Controlled
Pressure Valve
Tube Cleaning Nozzles
Operators of sewer and tube cleaning equipment need both hands free to feed or
retract the hose in the sewer line. Foot operated valve allows hands-free control.
•
•
•
•
•
344200
PRESSURE WASHERS ACCESSORIES
The reverse jets on the fixed and rotary nozzles pull the hose through the tube
or sewer line and blast debris from line or tube walls. Fixed nozzles also have forward orifice to blast blockage out of the way.
• Standard sewer nozzle
• Blast forward and back
• Clears clogs and
flushes out lines
• 4200 PSI
Inlet 3/8" - outlet 1/4"
Brass body – Stainless steel valve
Steel cover for safety
Up to 12 GPM
Up to 5000 PSI
342024
Part No.
Description
PSI
344200
342024*
089006
089850
Sewer Cleaner Foot Valve
Foot Valve w/ ST-2305
Repair Kit - Foot valve
Repair Kit ST-2305
3000
5000
*Heavy gauge steel construction for durability and stability
• Complete kit; includes 25' hose,
4.5 nozzle and foot valve
• Ready to go!
Part No.
Description
PSI
4-0193
Foot Controlled Pressure Valve Kit
3000
Sewer Hose
SUPER FLEXIBLE SEWER LINE HOSE Hose and couplings have small outside
diameter, allowing hose and nozzles to fit through sewer line. Sewer line has
Super Tough poly-ether cover over ultra-flexible nylon
tube. (1/8" sewer nozzle and hose will operate
through many 1-1/2" lines.)
Part No.
Nozzle
Size
373024
1/8"
(back jet only)
1/8"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
3/8"
4.5
5.5
4.5
5.5
6.0
7.5
8.0
12.0
4.0
5.5
8.5
12.0
14.0
4-01916
4-019101
4-01911
4-01913
4-01914
373028
373032
373038
373037
373039
373036
373035
Rotating Nozzle
4-01917
4-01918
4-01919
Duct Cleaner*
373040
1/8"
1/4"
1/4"
5.5
5.5
8.0
1/4"
5.5
*Duct Cleaner jet to sides instead of reverse
Stainless Steel Sewer Nozzles
• 4100 PSI
• Corrosion Resistant
Stainless steel
(Nozzles not included.)
• 150°F
• Nylon tube, poly-ether cover
Part No.
Description
1/8" hose – 3000 PSI working pressure
150960
1/8" x 25' Hose (1/4" Inlet/1/8" Outlet)
150963
1/8" x 50' Hose (1/4" Inlet/1/8" Outlet)
150964
1/8" x 100' Hose (1/4" Inlet/1/8" Outlet)
1/4" Hose – 2500 PSI working pressure
150968
1/4" x 50' Hose (1/4" Inlet/1/4" Outlet)
150970
1/4" x 100' Hose (1/4" Inlet/1/4" Outlet)
1/4" Hose – 4200 PSI working pressure
150972
1/4" x 50' Hose (1/4" Inlet/1/4" Outlet)
150973
1/4" x 100' Hose (1/4" Inlet/1/4" Outlet)
• Rotating sewer
nozzle
• Adds extra agitation
• 3000 PSI
• Back Jet Only
Part No.
Nozzle
Size
373075
373076
373077
373078
373079
373080
1/8" FPT
1/8" FPT
1/8" FPT
1/4" FPT
1/4" FPT
1/4" FPT
5.0
5.5
6.0
6.5
7.0
9.5
• One Forward Orifice
• Three Rear Orifices
Dual Chemical Systems
• New deep-ribbed Yellow casing, stays flexible even
in cold temperature
• Hose assembly complete with gun and amphenol
connectors pre-wired
• Fully compatible with Power Blaster, Two-Step, Chemex
and most other cold water dual chemical systems
Part No.
Description
285116
285120
80' R2 Electric (5 wire)
100' R2 Electric (5 wire)
LANDA
21
PRESSURE WASHERS ACCESSORIES
Vinyl Skid Covers
Siphon Pumps
Custom-designed covers provide all-weather protection for Landa’s skidmounted pressure washers.
Siphon liquids from higher to lower levels. Simply pump the bellows a few times
to prime and start flow. Loosen air lock to stop.
Made of seamless, truck-tarp-quality, vinyl-coated polyester (18 oz. per square
yard), the covers fit snugly over the equipment so there is no need to tie down
the cover.
The covers are both
waterproof and capable of
withstanding high winds.
•
•
•
•
2-9025
Part No.
2-9025
2-9026
Drum pump fits 15, 30 & 55 gallon drums
Fit 2" bung opening
Excellent for: Alkaline & acidic chemicals, diesel fuel, & oils
Not for use with solvents!
Description
Part No.
Description
SDHW, SGHW, Vinyl Cover
PGHW, Vinyl Cover
118431
9-50035
90-8108
118420
Super Duty “PE/PVC” 7 GPM
Red Hex Head (Heavy-duty)
Red Head (Standard duty)
Pail Pump (5 Gallon)
Gloves - Industrial Duty
Industrial Grade Gloves for most industry needs chemical/ heat/ abrasion/
laceration protection.
116105 Gray – Split Cowhide work
gloves, 2-1/2" gauntlet unlined –
Great general purpose work glove.
Part No.
Description
116105
116114
Gray Roughout
Black PVC
Drum / Tank Pump - Crank Type
Chemical-resistant, lightweight pump, ideal for dispensing chemicals, pesticides
and oils. Polypropylene for most alkalies, dilute acids, pesticides, and most oils
& solvents. Ryton for extremely aggressive acids, aromatic
and aliphatic hydrocarbons.
SPECIFICATION:
• 11 oz per revolution
• 6 GPM @ 70 RPM
• Viton seals
• Polypropylene gasket
116114 Black, 14" PVC Glove lined with
cotton for the most demanding chemical
handling. Resists alkalines, acids – even
works well as a sandblasting glove.
Drum Tool Accessories
Part No.
Description
118435
118438
076975
Polypropylene Pump (Standard)
Ryton Pump (Deluxe)
Replacement Handles
•
•
•
•
2" bung adapter
Outlet 3/4" barb 2 piece
47" suction tube
Weight 2.6 lbs
The Indispensable Tools.
Air Power Sprayers
249939
449339
118400
Part No.
118404
Description
449339
Drum Plug Wrench
118400
Lid-Off
118404
Funnel, 7" x 10"
118407
3/4" Faucet
118408
2" Faucet
Load Cincher Tie Downs
249938
7/8" x 5-1/2' (Non-Ratchet) “Quick Lock”
249939
1" x 15' (Ratchet) “Tight Lock”
22 LANDA
•
•
•
•
•
•
118407
Pump-up style
Heavy-duty plastic sprayers for chemical applications
Both models have Adj. Nozzle – from mist to solid stream
2 gallon unit has 2' hose and hand trigger
Excellent chemical resistance
Locking hand pump handle serves as carrying handle
Part No.
Description
118842
118835
Thumb Button 3 Pint
2 Gallon Sprayer
Your One Stop Shop for Parts
Compact Foamer
PRESSURE WASHERS ACCESSORIES
Rain Suit - 2 Piece
Generates a high density clinging foam for extended dwell time to increase
chemical action
• Stainless steel,
aluminum and brass
• 5" long, 1" diameter
• 4 and 6.5 nozzle
included
Part No.
Description
344022V
344023V
1/8" F Inlet
1/4" F Inlet
• Heavy-duty 2-ply laminated vinyl
(25 mil)
• Jacket & pants
• Bright safety yellow
• Vented for air flow
• 1 to 5 GPM
• 2500 PSI
• 195°F
NOTES: Most cleaning chemicals perform best when applied at 120° - 150°F and can be applied as a
foam by adding a foaming agent. See your chemical supplier to obtain the correct product.
Foam Cannon
The Ideal Foam Generator Application Accessory meters the foaming
chemical for customized foam type and applies the foam to match the application.
• Stainless Steel 1.5mm orifice
(#5.5 nozzle equivalent)
• Brass meter valve
• 4.8 GPM
• 3000 PSI
• 176°F
• High impact glass-filled body
• SS Foam Turbulator
• 1/4" FPT lance connect
Part No.
Description
344030
344032
Foam Cannon/ Injector
Foam Cannon/ Injector/Bottle
Thread Lock Products
NUT GRADE™ Medium strength threadlocking. Seals most types of nuts
and bolts, allowing disassembly with standard tools. Blue in color; removable
and non-running.
STUD GRADE™ Very high strength PERMANENT threadlocking for maximum
security. Suitable for most applications on fasteners up to 1" in diameter where
disassembly is not required. Red in color.
PENETRATING ADHESIVE (SEALANT) is designed specifically for use on
pre-assembled connections. Seals small gaps through capillary action.
Green in color.
• Direct replacement for LocTite®
and Fel-Pro™ products
• ND™ anaerobic adhesives are liquid materials
that cure to a solid, chemical-resistant plastic
state when air is not present
• Excellent lubricant; prevents corrosion
and fretting
Part No.
Description
LocTite Equiv
112350
112352
112354
112360
112362
112367
Nut Grade™
Nut Grade™
Nut Grade™
Stud Grade™
Stud Grade™
Penetrating Adhesive (Sealant)
242
242
242
271
271
290
Part No.
Description
116100
116101
Large
Extra Large
Amazing Pocket Reference - 3rd Edition
A ton of information in a 5 oz book!
•
•
•
•
•
•
•
•
•
Part No.
Description
449015
Pocket Reference
Air & gases
Automotive
Chemistry
Electrical
Physical constants
Math
3350 conversion factors
Plumbing & pipe
Over 20 other subject areas
Shipping Tape & Dispenser
Big 2" x 110 yard rolls of clear. Biaxially-oriented polypropylene
for secure packages.
• Heavy-duty tape dispenser
with serrated blade
Part No.
Description
118916
118918
Dispenser Boxed
110 Yard Roll
Bottle Size
10 ml
50 ml
250 ml
10 ml
50 ml
10 ml
Nut Grade™ and Stud Grade™ are trademarks of the Oakland Corp.LocTite® is a registered
trademark of the LocTite Corp.
LANDA
23
PRESSURE WASHERS ACCESSORIES
Goff’s Curtain Walls
Build a Power Wash Cell to meet your needs. Goff’s Curtain Walls™ increase
useable floor space while controlling overspray, contaminants, climate, and noise
levels. Curtain Walls™ glide easily on steel track and dual-wheeled rollerhooks.
Made from a combination of 14-oz. heavy-duty, reinforced vinyl and double-polished 20-mil clear PVC material. Reinforced hems and chain-weighted lower
hems add durability. Hook and loop fasteners on side hems attach to adjacent
panels. Meet NFPA-701 requirements for flame retardancy. Curtains are also rot
and mildew resistant. Standard model has a white vinyl top, clear PVC center, and
blue vinyl bottom.
• #2 Brass tooth grommets on 1' centers
balance
• 14 oz. reinforced vinyl white top section
• All seams double locked stitched
• Hook & Loop Fasteners allow adjacent panels
to be easily attached to one another
52"
• 20 mil. double polished clear window
• All sections joined together using mildew/
rot resistant thread
• 14 oz. reinforced colored vinyl section
(your choice of over 12 different colors)
27"
• Chain weighted lower hem
Part No.
Single
681135
681136
681134
681133
681083
681084
681089
681082
681088
681085
681086
681087
Station
681137
681146
681140
681143
681138
681147
681141
681144
681139
681148
681142
681145
Description
PSI
6' width x 8' high
6' width x 9' high
6' width x 10' high
6' width x 12' high
12' width x 8' high
12' width x 9' high
12' width x 10' high
12' width x 12' high
24' width x 8' high
24' width x 9' high
24' width x 10' high
24' width x 12' high
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
2-sided x 8' high
2-sided x 9' high
2-sided x 10' high
2-sided x 12' high
3-sided x 8' high
3-sided x 9' high
3-sided x 10' high
3-sided x 12' high
4-sided x 8' high
4-sided x 9' high
4-sided x 10' high
4-sided x 12' high
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
includes hardware, track & rollers (white top, clear center & blue bottom panel)
All 2,3 & 4-sided stations are 12' wide x 24' long (see diagram above)
24 LANDA
GUNS & LANCES
Your One Stop Shop for Parts
Landa Gun
Linear Trigger Guns
Designed exclusively for Landa to meet the demands
of the high pressure cleaning professional.
Superior quality inline gun, especially well suited
for high reach applications.
•
•
•
•
•
•
•
•
•
•
PSI: 5000
GPM: 10
Temperature: 350°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 27.5 oz
PSI: 4000
GPM: 10.5
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 21.9 oz
Linear
Landa 5000 PSI
Part No.
Description
Part No.
Description
4-01212
12-30203124
Landa Gun
Repair Kit
353201
109797
Linear 2 Gun
Repair Kit-Linear 2 Gun
Legacy AP1000 Trigger Gun
The World’s most popular and easy to repair trigger gun!!!
•
•
•
•
•
AP1000
•
•
•
•
•
PSI: 4500
GPM: 12
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 19 oz
Part No.
Description
353010
AP1000
353010W
AP1000 Weep
109856
Unitized Valve
109857
Unitized Valve (Weep)
109858
Trigger Seal Kit
AP2000
Part No.
Description
353020
109875
109876
AP2000
Trigger Seal Kit
Valve Seat Kit
•
•
•
•
•
Part No.
Description
353025
109950
109960
Model 2500
Unitized Valve
Trigger Seal Kit
PSI: 4600
GPM: 10
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 23 oz
GPM: 7
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 14 oz
Iride Trigger Gun
Power performance with comfort and durability.
•
•
•
•
•
PSI: 3000
Part No.
Description
353270
109950
109960
Iride
Repair Kit
Trigger Seal Kit
PSI: 4100
GPM: 8
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 24 oz
Giant Trigger Guns
Extra value!
The Original “Heavy weight”.
•
•
•
•
•
•
•
•
•
•
PSI: 4000
GPM: 7
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 13.4 oz
PSI: 5000
GPM: 10
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 29.28 oz
21290C
AP740
Part No.
Description
Part No.
Description
353030
111266
111279
AP740
Repair Kit
Trigger Seal Kit
81-21250
352250
81-21227
21290C - Brass Outlet
21250B - SS Outlet
Repair Kit
LANDA
25
GUNS & LANCES
Suttner Trigger Guns
Suttner Trigger Guns (continued)
High pressure and fatigue free “relax action” design.
15° offset angle thru gun for easier overhead use.
•
•
•
•
•
GPM: 12
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 21 oz
ST-2605
Part No.
Description
4-01223
84-202300490
ST-2605
Unitized Valve
•
•
•
•
•
PSI: 5000
ST-601
Part No.
Description
4-01204
84-202000044
ST-601
Unitized Valve
GPM: 12
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 23 oz
Relax action design, STAINLESS STEEL gun.
•
•
•
•
•
Extreme durability with easy pull trigger.
•
•
•
•
•
ST-2305
PSI: 4000
PSI: 5000
GPM: 12
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 21 oz
ST-2700
Part No.
Description
4-01224
84-202700490
ST-2700
Unitized Valve
PSI: 5000
GPM: 12
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 21 oz
Excellent for truck and fleet washing applications
Part No.
Description
4-01922
352239
84-202300490
089851
ST-2305
ST-2300 w/ Weep (4500 PSI)
Unitized Valve
Unitized Weep Valve
•
•
•
•
•
ST-810 POM
PSI: 2000
GPM: 8
Temperature: 320°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: .82 lb
The handle style for “Big Hands”.
•
•
•
•
•
PSI: 4000
GPM: 12
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 26 oz
Part No.
Description
352210P
ST-810 POM
J.E. Adams Trigger Gun
Vented handle for Cooler Operation.
ST-2000
Part No.
Description
4-01203
84-202000044
089631
ST-2000
Unitized Valve
Unitized Weep Valve
The perennial favorite for general pressure washer
applications.
•
•
•
•
•
ST-1500
PSI: 4000
GPM: 12
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 20.5 oz
Part No.
Description
4-01205
352236
84-202000044
089631
ST-1500
ST-1500 w/ Weep
Unitized Valve
Unitized Weep Valve
26 LANDA
•
•
•
•
•
5030NP
Part No.
Description
85-5030
85-5044
Adams 5030NP
Repair Kit
PSI: 4500
GPM: 12
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 25.64 oz
MV 950 Gun
•
•
•
•
•
Part No.
Description
353045
110030
Model 950
Valve Kit
PSI: 4500
GPM: 8
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 20 oz
GUNS & LANCES
Your One Stop Shop for Parts
PA Trigger Guns
PA Trigger Guns (continued)
Good Solid Heavy-duty Trigger Gun.
•
•
•
•
•
PSI: 5000
•
•
•
•
•
GPM: 10.5
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 26 oz
RL30 – YG5000
PSI: 3200
GPM: 8
Temperature: 320°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 10 oz
RL20
Part No.
Description
Part No.
Description
4-01211
111976
RL30–YG5000
Repair Kit
353207
109993
RL20
Repair Kit
Good Solid Heavy-duty Trigger Gun.
MV Hobby Wash Gun
•
•
•
•
•
Vega 5000
PSI: 5000
Part No.
Description
352222-5
352222W
110550
110574
111950
Vega 5000
Vega Weep Gun
Valve Kit Vega
Weep Valve Kit Vega
Repair Kit
Easy Hold Trigger, Stainless Steel Compensating.
•
•
•
•
•
Excellent Light-duty gun.
GPM: 10.5
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 27.5 oz
•
•
•
•
•
Hobby Wash Gun
353223
111980
Orange Nova SS Gun
Repair Kit Orange Nova
RL-55 Blue & Lance
Part No.
Description
4-01219
353250
368440PB
111814
Gun/Lance Assembly
RL-55 Blue Gun
40" SS Lance w/ Blue Vent Grip
Repair Kit- RL-55
PSI: 5000
GPM: 8
Temperature: 302°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 20 oz
Part No.
Description
353110
353111
AL016650016
AL 35 - Blue
AL 35 - Yellow
Repair Kit
•
•
•
•
•
PSI: 5650
GPM: 8
Temperature: 320°F
3/8" FPT inlet x 1/4" BSP outlet
Weight: 23.3 oz
Blue vent grip, stainless steel lance
has 1/4" BSP threads
Hobby Wash Gun
Easy pull trigger.
Easy pull and easy to hold with matching blue lance.
•
•
•
•
•
•
Description
353040
•
•
•
•
•
AL 35
Description
Part No.
Easy Pull, Easy Hold!
GPM: 10.5
Temperature: 320°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 30 oz
Part No.
GPM: 5
Temperature: 180°F
1/4" M inlet x 1/4" F outlet
Weight: 8.4 oz
Arrowline Guns
PSI: 6400
Orange Nova
PSI: 1850
AL 19
GPM: 8
Temperature: 302°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 20 oz
Part No.
Description
353105
AL016650016
AL 19
Repair Kit
•
•
•
•
•
AL 5
PSI: 4500
PSI: 4060
GPM: 10.5
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 25 oz
Part No.
Description
353100
AL01165006
AL 5
Repair Kit
LANDA 27
GUNS & LANCES
Big Guns
•
•
•
•
•
PSI: 1800
GPM: 26.5
Temperature: 300°F
1/2" FPT inlet / outlet
Weight: 59.2 oz
Model 100 “Big Brown Gun”
•
•
•
•
•
PSI: 8100
•
•
•
•
•
PSI: 7250
GPM: 21
Temperature: 210°F
1/2" SS FPT inlet / outlet
Weight: 60.3 oz
Model 80 “Big Black Gun”
•
•
•
•
•
PSI: 3200
GPM: 42
Temperature: 210°F
1/2" FPT inlet / outlet
Weight: 60.3 oz
GPM: 26
Temperature: 300°F
1/2" plated steel FPT inlet / outlet
Weight: 42.5 oz
ST-3002 Stainless Steel Gun
Model 160 “Big Blue Gun”
Part No.
Description
Part No.
Description
353245
109775
353260
111900
Model 100
Repair Kit - Model 100
Model 160
Repair Kit - Model 160
353246
109825
352223
089876
089875
Model 80
Repair Kit
ST-3002
Repair Kit (Includes Seal Kit)
Seal Kit
Part No.
Description
352902A
352904A
352906A
20" Wand w/ Handle
40" Wand w/ Handle
Side Handle Only
Big Stainless Steel Lances & Side Handles
For big guns shown above.
• High pressure stainless steel pipe
• Complete with adjustable handle
& coupler for 1/4" MPT nozzle
• 1/2" MPT gun connection
• Schedule 80 pipe
• PSI: 7200
• Temperature: 300°F
Open Guns
Open Guns (continued)
Just plain comfortable!
•
•
•
•
•
•
•
•
•
•
PSI: 4500
GPM: 12
Temperature: 302°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 21.5 oz
Part No.
Description
352602
12 GPM Open Gun
Part No.
Description
353050
AP740 Open Gun
Flow Thru Guns
PSI: 4000
GPM: 7
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Weight: 12.2 oz
“Slim” Grip
Durable Glass Reinforced Handle.
“Full” Grip
•
•
•
•
•
PSI: 4000
GPM: 12
Temperature: 300°F
3/8" FPT inlet x 1/4" FPT outlet
Tubular Flow-Thru internals for high
pressure and efficiency
• Weight: 16.7 oz
Part No.
Description
352600
Legacy AP1000 Open Gun
28 LANDA
• Pistol grip gun handle
• Tough polyurethane
insulation
Part No.
Description
352605
352606
Full Red Grip 3/8" FPT x 1/4" FPT
Full Black Grip 3/8" FPT x 1/4" FPT
Gun Handle w/ 18" Lance
352614
352616
Slim Red Grip 1/4" M x 1/4" F
Full Black Grip 3/8" F x 1/4" M
• Cushion grip - red or black
• Full grip or slim line handle
(See specs below)
GUNS & LANCES
Your One Stop Shop for Parts
Landa Variable Pressure Lances
The Landa Stainless Steel Variable pressure lance simply out classes the competition. 41" length to meet ETL Standards plus 1/4" stainless steel
tubes provide superior look and durability. Designed specifically for Landa to our specifications
NEW
• 4-011143A
IMPROVED
with coupler shown
VALVE
• 1/4" stainless
BODY!
or zinc plated tubes
• Fully insulated
• New improved brass valve body
and Stainless Steel valve bushing
Part No.
Description
4-011143A
4-0111391
4-0111351A
83-SSVPKIT
Stainless Steel w/ Coupler
Stainless Steel Lance Only
Zinc Plated w/ Coupler
Repair Kit
Insulated Lances
Steam Lance
Landa Quality through and through. Superior heat
protection with stainless steel tube construction. Available
in stainless steel and zinc plated with vented grips or with
molded plastic grip as shown below
Designed for use with the Landa Hot 3-300 Steamer
unit. Completely insulated for maximum protection
• 4-01111 lance
with steam nozzle shown
• 4-0111021 35.5" lance with vented
grip and coupler, stainless steel
shown
• Vented insulated grip
Part No.
Length
Description
4-0111021
4-01114230
4-011062
4-0111427
35.5"
35.5"
72"
72"
Vented Grip w/ Coupler, SS
Vented Grip, SS, Lance only
Plated, Vented Grip w/ Coupler
Plated, Vented Grip, Lance only
Part No.
Description
4-01111
4-01110
48" w/ Steam Nozzle
48" w/o Steam Nozzle
• Vented grip full length of lance
Cold Water Lances
Made of 304 Stainless Steel for long lasting durability.
As shown below, the 4-0110410 31" lance also has a highly visible yellow safety cover and coupler
• High visibility yellow protective cover
AP Dump Gun
Water continues to run through the tube even when trigger
gun is closed.
• Stainless steel 1/4" pipe
Part No.
Description
4-0110410
31" Covered w/ Coupler
Dump Gun
• PSI: 3000
• GPM: 10.5
• Temperature: 140°F
• 3/8" FPT inlet x 1/8" FPT outlet
AP Single Lance
Dump Gun
Part No.
Description
352810
352812
109905
Dump Gun 16" Lance
Dump Gun 40" Lance
Repair Kit
Industrial duty dual-barrel.
• PSI: 3000
• GPM: 10
• Temperature: 200°F
• 3/8" FPT inlet x 1/8" FPT outlet
Dual Lance
Dump Gun
Part No.
Description
352820
075296
Dump Gun w/ 36" Lance
Repair Kits
LANDA 29
GUNS & LANCES
AL Dual Lances
Suttner Dual Lances
Premium lance with stainless steel inserted seat.
ST-54
w/ Side Handle
AL Premium
Dual Lance
• PSI: 3600
• GPM: 10.5
• Temperature: 302°F
• 1/4" tubing
• Vented grip
• 1/4" male inlet - female outlet
AL Basic
Dual Lance
• PSI: 3600
• GPM: 10.5
• Temperature: 302°F
Part No.
Description
368925
368925Z
AL8355VPKIT
368927
AL004650300
Stainless Steel Pipe
Zinc Plated Pipe
Repair Kit
Basic Dual Lance
Repair Kit
• 1/4" male inlet - female outlet
• 1/8" Zinc plated tubes
• Square molded grip inlet
•
•
•
•
ST-53 w/ Knob
PSI: 4000
GPM: 10
Temperature: 300°F
Zinc / chromate finish
•
•
•
•
38" total length
Molded grip
High pressure thin wall tubing
Weight: 42 oz
Part No.
Description
368153
368154
086884
086883X
086907
ST-53 with Knob (4000 PSI)
ST-54 with Side Handle (4500 PSI)
Repair Kit (ST-53)
Clamp Kit (ST-53/54)
Repair Kit (ST-54)
Dual Trigger Lance
Unique Design – Go from High Pressure to Low Pressure (Rinse
to Soap) with a pull of the trigger. Use with separate Trigger Gun
or as an Open Gun, and still change from High to Low.
Dual Lances
Interpump
Dual Lance
• PSI: 3000
• GPM: 10
• Temperature: 220°F
Part No.
Description
4-011139
4-0111412
4-011142A*
4-0111421*
1-VPKIT
36" Standard
72" Extended
36" Deluxe Standard
72" Deluxe Extended
Valve Repair Kit
• Excellent for down stream injector
• Zinc-plated for chemical resistance
• Brass & stainless steel valve
w/ Viton seals
• Side handle valve adjustment
• PSI: 3600
• GPM: 12
• Temperature: 300°F
Part No.
Description
368158
109490
48" Dual Trigger Lance
Seal Kit
Superlite stainless steel with nozzle guard.
Include Hardened Steel QC Inlet Plug, Soap
Nozzle and Top Quality Quick Coupler. See lances with deluxe noted above.
Suttner Push & Pull Lance
(Pictured in “pull” 90° position)
PSI: 3050
Temperature: 300°F
1/4" MPT inlet
1/4" MPT outlet
Vented grip can be pushed and pulled
to make 90 degrees
• Each desired angle remains stationary
until adjusted
• Cleans hard to reach areas easier,
saving time
Part No.
Description
368880
ST-85 Push & Pull Lance
30 LANDA
Zinc-plated steel tubes
Stainless steel seat
Includes nozzle protector
Weight: 39 oz
Legacy Superlite SS Dual Lance
*Deluxe Lances
•
•
•
•
•
•
•
•
•
• PSI: 4000
• Temperature: 200°F
Part No.
Description
368160
368165
109490
36" - 37.8 oz
72" - 56.0 oz
Seal Kit
•
•
•
•
•
Side handle/ Valve actuator
Viton seal
Forged brass valve body
1/4" MPT inlet
1/8" SS outlet tubing
GUNS & LANCES
Your One Stop Shop for Parts
PA Insulated Molded Grip Lances
Round Daisy Grip
•
•
•
•
PSI: 4000
Temperature: 300°F
Zinc-plated high pressure tubing
Glass-filled polyamide grips
•
•
•
•
Square Molded Grip Lances
1/4" MPT both ends
Round daisy grip
Better heat dispersion
Reduced weight
•
•
•
•
•
Part No.
Length
Description
Part No.
Straight Length
368712PA
368720PA
368724PA
368728PA
368736PA
368748PA
368760PA
368778PA
12"
20"
24"
28"
36"
48"
60"
79"
Single Grip
Single Grip
Single Grip
Single Grip
Single Grip
Double Grip
Double Grip
Triple Grip
368712A
368720A
368724A
368728A
368736A
368748A
368760A
368779A
12"
20"
24"
28"
36"
48"
60"
79"
PSI: 4500
Temperature: 300°F
Polyamide square grip
1/4" MPT both ends
Bright Zinc-plated Steel
NOTE: For 15° bend at Lance Discharge, Place “BND” at end of Part Number
AP Uninsulated Lances
AP Lances w/ Oval Grips
Stainless steel or corrosion-resistant bright zinc-plated lances
made with 1/4" tubing.
10% Lighter weight reduces operator fatigue. Stainless steel
or Zinc-Plated.
• PSI: 4100
• Temperature: 300°F
Part No.
Stainless Steel
368212
368220
368224
368228
368236
368248
368260
368278
• Superior strength rolled threads
• 1/4" high pressure, lightweight,
thin wall tubing
Length
12"
20"
24"
28"
36"
48"
60"
78"
Part No.
Stainless Steel
368412
368420
368424
368428
368436
368448
368460
368479
• 1/4" MPT both ends
• Tough glass-filled polyamide
• Molded-on solid oval
Length
Description
12"
20"
24"
28"
36"
48"
60"
79"
Single Grip
Single Grip
Single Grip
Single Grip
Single Grip
Double Grip
Double Grip
Double Grip
12"
20"
24"
28"
36"
48"
60"
79"
Single Grip
Single Grip
Single Grip
Single Grip
Single Grip
Double Grip
Double Grip
Double Grip
Zinc-plated
Zinc-plated
368312
368320
368324
368336
368348
368360
368378
• PSI: 4100
• Temperature: 300°F
12"
20"
24"
36"
48"
60"
78"
NOTE: For 15° bend at Lance Discharge, Place “BND” at end of Part Number
368712M
368720M
368724M
368728M
368736M
368748M
368760M
368779M
NOTE: For 15° bend at Lance Discharge, Place “BND” at end of Part Number
LANDA 31
GUNS & LANCES
Suttner Solid Insulated
Molded Grip Lances
Lance Handles / Accessories
Vented Grip, Side Handle with Nut and Vented Grip with Side Handle can be userattached to Uninsulated Lances or 1/4" Steel Pipe – Detachable & Reusable.
• PSI: 5800
• Glass-Filled Polyamide Grip
• Zinc-Plated High Pressure
Steel Tubing
• 1/4" MPT Both Ends
Part No.
Length
368712
368724
368736
368748
368760
368779
12"
24"
36"
48"
60"
79"
Description
368909P
368909PS
368920P
Vent Grip Only (14" long)
Grip with Side Handle
Side Handle with Nut
Description
368909
368911
4-01207
Vent Grip Only (14" long) ST-9
Grip with Side Handle
Side Handle with Nut
NOTE: For 15° bend at Lance Discharge, Place “BND” at end of Part Number
Spray-Flex™ Flex Wand
Super Value Vent Grip Lances
Stainless steel or zinc-plated lances with 1/4" inlet/outlet.
• PSI: 4100
• Temperature: 300°F
• Tough, reusable molded nylon
vented handles for heat dissipation
Part No.
Stainless Steel
368820SS
368824SS
368836SS
368848SS
368860SS
368879SS
Gives easy access to difficult spots, great for cleaning engines, roofs, eaves
or underneath almost anything! Holds its’ shape under pressure.
• PSI: 3000 or 5000
• Temperature: 190°F
• 90° flexibility
• Heat venting hollow insulators
• 1/4" nozzle protector INCLUDED
• 1/4" male inlet – female outlet
Length
Description
20"
24"
36"
48"
60"
79"
Single Grip
Single Grip
Single Grip
Double Grip
Double Grip
Double Grip
20"
24"
36"
48"
60"
79"
Single Grip
Single Grip
Single Grip
Double Grip
Double Grip
Double Grip
Part No.
Description
4-01109
368116
Spray-Flex™ Flex Wand - 3000 PSI
Spray-Flex™ Flex Wand - 5000 PSI
Flex Lances
Flexes a full 180° and returns, saving broken wand repairs.
Zinc-plated
368820M
368824M
368836M
368848M
368860M
368879M
• PSI: 2000
• Temperature: 200°F
• Prevents bent lances & broken hoses
• Industrial grade polyurethane
flex section
• Perfect for self-serve carwash bays
• 1/4" galvanized pipe end sections
NOTE: For 15° bend at Lance Discharge, Place “BND” at end of Part Number
MV Lance Handle
• Use on all 1/4" lances
• Easily positioned without removal of nozzle
Part No.
Description
109873
1/4" Lance Handle
32 LANDA
Part No.
Description
368118
368121
368124
18" Red, 1/4" MPT x 1/4" MPT
21" Red, 1/4" MPT x 1/8" FPT
24" Red, 1/4" MPT x 1/8" FPT
GUNS & LANCES
Your One Stop Shop for Parts
Telescoping Lances
Reach high places without scaffolding. High quality telescoping lance reaches up
to 24', 3 sizes to choose from. Lightweight and balanced under pressure
• PSI: 3000, Optional: 4000
• Temperature: 200°F
• Safe & convenient – cuts cleaning
time by 50%
• Easily adjusted for desired lengths
• Lightweight & balanced under pressure
•
•
•
•
1/4" QC socket for easy nozzle changes
3/8" QC plug on trigger gun inlet
Reinforced guns are bolted to lance
AP 2000 Gun (353020)
on 3000 PSI models
Part No.
Length
PSI
368095
368096
368097
6' – 12'
6' – 18'
8' – 24'
4000
4000
4000
Fiberglass Telescoping Lances
High quality telescoping lance reaches up to 24', 3 sizes to choose from.
Lightweight and balanced under pressure.
• PSI: 3500
• Temperature: 200°F
• 6' - 12' Lance shown
Shoulder Strap and Belt
Part No.
Length
PSI
Description
4-011012
4-011018
4-011024
4-011015
6' – 12'
3500
6' – 18'
3500
8' – 24'
3500
Strap & Belt Shoulder Harness
Long!
Longer!!
Longest!
Hobby Gun, Lance & Hose
Don’t turn away hobby unit owners. Complete replacement hose, gun and lance!
Part No.
Description
4-011137
4-011106
4-011105
4-02010025M
Insulated Lance w/ Gun
Lance w/ Coupler (Not Shown)
Lance w/ #3 Hi/Low Varifan Nozzle
1/4" x 25' Thermoplastic Hose, 22mm both ends
NOTE: See page 40 for more Hobby Hoses
X-Jet Long Range Nozzle
• Projects water and chemical up to 40'
• Chemicals bypass pump, lance, hose
and gun for damage protection
• Includes15' hose with inline shut-off
valve and color coded proportioners
Part No.
Description
PSI
360103
360104
360102
X-Jet Long Range Nozzle
X-Jet Long Range Nozzle
M5 X-Jet Variable Fan
Long Range Nozzle
2000-3000
3000-4000
2000-3000
360103
LANDA 33
GUNS & LANCES
Kew Replacement Accessories
•
•
•
•
•
PSI: 4000
GPM: 10.5
Temperature: 300°F
3/8" F inlet
Bayonet Quick Coupler Outlet
• 416 Stainless Steel Plug attaches
any 1/4" lance to Kew Guns
Bayonet Plug
Iride Kew Style
Part No.
Description
Part No.
Description
353065
109950
109960
Iride Kew Style
Unitized Valve
Trigger Seal Kit
373068
373069
SS Plug
SS Plug w/ set back threads
Replacement Accessories
Tip Retainer
Fits vent grip lance and other nozzles.
• PSI: 4000
• Temperature: 300°F
• M22 - 1 “O” Ring inlet
(Standard)
• M22 - 2 “O” Ring outlet
(Extended)
Astra Style
• 18mm Thread
• Fits vent grip lance
& other nozzles
Tip Retainer
Iride Style
Part No.
Description
353070
353075
Astra Style, 10.5 GPM
Iride Style, 8 GPM
• See tip jet nozzles
in nozzle section
Part No.
Description
373065
Tip Retainer
• Double O-ring Seal
• Machined Brass Body
• High Impact Plastic Knob
• PSI: 3600
• GPM: 11
• Temperature: 300°F
Maintenance Kits
109950
Unitized Valve
109960
Trigger Seal Kit
Extended Twist
Seal Coupler
Part No.
Description
331215
331315
Coupler 1/4" FPT x 22mmF
Plug 1/4" FPT x 22mmM
Tip-Jet Nozzle System
“Tip-Jet” Nozzle Systems are versatile nozzling systems for everyday or specialized applications.
Tip-Jet Tips
• PSI: to 4000
• Neat & simple
tip change
• Hardened stainless
steel tips with vanes
• Strainers available
• Body components
available in brass,
zinc-plated steel
or stainless steel
Nozzle
Size
0°
15°
25°
40°
Nozzle
Size
0°
15°
25°
40°
3.0
4.0
4.5
5.0
5.5
6.0
253316
253330
253338
253346
253355
253365
253317N
253331
253339
253348
253357
253367
253318
253332
253340
253349
253358
253368
–
253333
253341
253350
253359
253369
6.5
7.0
7.5
8.0
9.0
10.0
253375
253383
253392
253400
253415
253456
–
253385
253393
253401
253416
253457
253377
253386
253394
253402
253417
253458
253378
253387
253395
253403
253418
253459
See page 62 for other Tip-Jet components
34 LANDA
HOSES & HOSE REELS
Your One Stop Shop for Parts
Landa Tuff-Skin™ Hose
For use with: hot or cold-water pressure Washer
here is no other high-pressure hose as tough as Landa’s Tuff-Skin™
hose. When tested to ISO 6945 / DIN 20024, the Tuff-Skin has proven
to be seven times more abrasion resistant than standard pressure
washer hoses yet is 20% more flexible. The Tuff-Skin, with its unique
design, has been engineered for a greater continuous temperature
range—from -40° to 275°F / 310°F intermittent— and for handling
pressures of up to 6000 PSI.
Beside its maximum-strength Class A ORS
(Oil Resistance Standard)—most other
brands are Class B— the Tuff-Skin has
a “bite-the-wire” coupling that grips
the hose better than any other design.
Both single-and double-wire braid
hoses come with Landa branded durable plastic sleeves on both
ends—a 24-inch sleeve on the gun end—for added operator protection against
high-pressure bursts.
■
Greater Oil Resistance: Both the tube and the cover carry the maximum Class A
ORS (Oil Resistance Standard) for longer life. Most brands of hose carry only a
Class B rating.
■
Certified Burst Protection: Tuff-Skin meets the stringent UL-1776 safety standards
with two hose guards—including a 24-inch sleeve on the gun end—for added
operator protection against bursts.
■
Higher Temperature Rating: Tuff-Skin hoses are rated for continuous temperatures
up to 275°F / 310°F intermittent —20-30% higher than other brands.
■
Higher Abrasion Resistance: The Tuff-Skin cover has been specially compounded
to deliver 7 times the abrasion resistance of other brands.
■
Special Wire Braid: Unique design of braid gives Tuff-Skin hose
added durability, greater working pressure and higher impulse
cycle in both the double- and single-wire products.
■
Additional Flexibility: Even with extra durability, the braid design allows for 20%
more flexibility than other brands.
■
Easily Identified: Permanently embossed identification makes
for easy tracing and owner protection.
Tuff-Skin 2-Wire 6000 PSI Hose
■ Unique Coupling: A “bite-the-wire” coupling actually reaches the wire
braid for never-slip retention, far superior to the “compression” fittings used
on conventional hoses.
Tuff-Skin 1-Wire 4000 PSI Hose
• Wrapped impression,
maximum oil resistant
tube and cover
• LANDA branded yellow
hose guard
• 2-wire protection
• Seven times greater abrasion resistance
• Built to SAE 100R2AT OD dimensions
• 3/8" MPT Swivel x 3/8" MPT Solid
• Wrapped impression, maximum oil resistant tube and
cover
• LANDA branded black hose
guard
• 20% greater flexibility
• Seven times greater abrasion resistance
• Built to SAE 100R1AT OD dimensions
• 3/8" MPT Swivel x 3/8" MPT Solid
Part No.
Size
Temp
PSI
Part No.
Size
Temp
PSI
87390710
87390720
87390730
87390740
87390750
25' x 3/8" ID
50' x 3/8" ID
75' x 3/8" ID
100' x 3/8" ID
150' x 3/8" ID
275°F
275°F
275°F
275°F
275°F
6000
6000
6000
6000
6000
87390250
87390260
87390270
87390280
87390290
25' x 3/8" ID
50' x 3/8" ID
75' x 3/8" ID
100' x 3/8" ID
150' x 3/8" ID
275°F
275°F
275°F
275°F
275°F
4000
4000
4000
4000
4000
4-02063450
4-02063499
4-020434200*
50' x 1/2" ID
100' x 1/2" ID
3/8" (bulk hose)
275°F
275°F
275°F
5800
5800
5800
4-02053450
4-02053498
4-020334200*
50' x 1/2" ID
100' x 1/2" ID
3/8" (bulk hose)
275°F
275°F
275°F
3000
3000
3000
*400 feet per reel
*500 feet per reel
LANDA 35
HOSES & HOSE REELS
Landa Tuff-Flex Hose
Tuff-Flex hose has the same durable cover as Tuff-Skin with a smaller outside diameter for greater flexibility!
3/8" Tuff-Flex 2-Wire 5000 PSI Hose
3/8" Tuff-Flex 1-Wire 3000 PSI Hose
Tuff-Flex hose has the same durable cover as the Tuff-Skin
hose. A smaller OD allows for even greater flexibility.
Tuff-Flex hose has the same durable cover as the Tuff-Skin
hose. A smaller OD allows for even greater flexibility.
• Black Landa branded hose guard
• Wrapped impression, maximum oil
resistant tube and cover
• 50% greater flexibility
• Seven times greater abrasion resistance
• Economically priced
• 3/8" MPT Swivel x 3/8" MPT Solid
• Yellow Landa branded hose guard
• Wrapped impression, maximum oil
resistant tube and cover
• 50% greater flexibility
• Seven times greater abrasion resistance
• Economically priced
• 3/8" MPT Swivel x 3/8" MPT Solid
Part No.
Size
Temp
PSI
Part No.
Size
Temp
PSI
87392120
87392130
87392140
87392150
87392160
25' x 3/8" ID
50' x 3/8" ID
75' x 3/8" ID
100' x 3/8" ID
150' x 3/8" ID
275°F
275°F
275°F
275°F
275°F
5000
5000
5000
5000
5000
87391330
87391340
87391350
87391360
87391370
25' x 3/8" ID
50' x 3/8" ID
75' x 3/8" ID
100' x 3/8" ID
150' x 3/8" ID
275°F
275°F
275°F
275°F
275°F
3000
3000
3000
3000
3000
3/8" Blue Tuff-Flex 2-Wire 5000 PSI Hose
3/8" Blue Tuff-Flex 1-Wire 3000 PSI Hose
• Non-markingdurable blue cover
• Yellow Landa branded hose guard
• Wrapped impression, maximum oil
resistant tube and cover
• 50% greater flexibility
• 3/8" MPT Swivel x 3/8" MPT Solid
• Non-markingdurable blue cover
• Black Landa branded hose guard
• Wrapped impression, maximum oil
resistant tube and cover
• 50% greater flexibility
• 3/8" MPT Swivel x 3/8" MPT Solid
Part No.
Size
Temp
PSI
Part No.
Size
Temp
PSI
87392170
87392180
87392190
87392200
25' x 3/8" ID
50' x 3/8" ID
75' x 3/8" ID
100' x 3/8" ID
275°F
275°F
275°F
275°F
5000
5000
5000
5000
87391380
87391390
87391400
87391410
25' x 3/8" ID
50' x 3/8" ID
75' x 3/8" ID
100' x 3/8" ID
275°F
275°F
275°F
275°F
3000
3000
3000
3000
Industrial Garden Hose
Built to last, extra-large 3/4" ID Inlet water hose. EPDM cover and tube is perfect for water and provides ozone and heat protection.
•
•
•
•
•
36 LANDA
EPDM Tube and Cover
Class C Oil Resistant
-40°F to 212°F
Heavy-Duty, contractor grade
Crush resistant fittings
Part No.
Size
Temp
PSI
4-02140025
4-02140050
4-02140075
4-02140099
25' x 3/4" ID
50' x 3/4" ID
75' x 3/4" ID
100' x 3/4" ID
212°F
212°F
212°F
212°F
200
200
200
200
HOSES & HOSE REELS
Your One Stop Shop for Parts
Sandblast Hose
1/4", 3/8" & 1/2" 2-Wire Pressure Loop
Heavy-duty spiralite hose available preassembled
or by the foot.
• 3/4" spiralite sand hose with air hose
locking couplers
• -30°F to 130°F
Part No.
Size: ID
Temp
Description
4-02190000
4-02199925
4-02199940
3/4"
3/4" x 25'
3/4" x 40'
130°F
130°F
130°F
Sand, Spiralite /ft
Assy, Sand, Spiralite 25'
Assy, Sand, Spiralite 40'
Float Tank Inlet Hose
Float tank connection hoses are completely assembled and ready to go. Don't see
the size you need? Call us for special orders.
• Pre-made hose with special float
fitting already installed
• 3/8" ID Push-on hose
• -40°F to 212°F
Part No.
Size
4-02100008
4-02100009
4-02100013
4-02100030
4-02100045
2-30140
8"
212°F
300
11"
212°F
300
13"
212°F
300
30"
212°F
300
45"
212°F
300
Connector, Fluidmaster Ball Cock
Temp
PSI
Push-On Hose
This is a fabric braid hose with a Nitrile cover and tube. Easily pushes on to hose
barb fitting and good up to 300 PSI.
• Fabric braid
• Nitrile cover
• -40°F to 212°F
Part No.
Size
Temp
PSI
4-02100000
4-02110000
4-02120000
1/4" ID
1/2" ID
3/4" ID
212°F
212°F
212°F
300
300
300
Vinyl Tubing
This 1/4" x 1/2" clear vinyl tubing is heavier duty than the rest! Thick wall resists
kinking. Available in clear or clear reinforced with a polyester braid.
The 1/4" ID pressure lines swivel at both ends for most any application. The
3/8" ID pressure loops have female JIC on both ends for typical unloader
connection hose.
1/4" ID Pressure Line
• 1/4" MPT swivel
x 1/4" MPT swivel
• 1/4" ID two-wire 5000 PSI
• Any length available
JIC Pressure Loop
• 1/2" female JIC swivels
on each end
• 3/8" ID two-wire 4500 PSI
• Any length available
Part No.
Size
Temp
PSI
Description
4-02021216
4-02021220
4-02021226
4-02021228
4-02021230
4-02021236
4-02021242
4-02047716
4-02047720
4-02047722
4-02047725
4-02047729
4-02047736
4-02047738
4-02047742
4-02067720
4-02067722
4-02067728
4-02067746
4-02067770
16" x 1/4" ID
20" x 1/4" ID
26" x 1/4" ID
28" x 1/4" ID
30" x 1/4" ID
36" x 1/4" ID
42" x 1/4" ID
16" x 3/8" ID
20" x 3/8" ID
22" x 3/8" ID
25" x 3/8" ID
29" x 3/8" ID
36" x 3/8" ID
38" x 3/8" ID
42" x 3/8" ID
20" x 1/2" ID
22" x 1/2" ID
28" x 1/2" ID
46" x 1/2" ID
70" x 1/2" ID
275°F
275°F
275°F
275°F
275°F
275°F
275°F
275°F
275°F
275°F
275°F
275°F
275°F
275°F
275°F
275°F
275°F
275°F
275°F
275°F
5000
5000
5000
5000
5000
5000
5000
4500
4500
4500
4500
4500
4500
4500
4500
4500
4500
4500
4500
4500
1/4" Pressure Line
1/4" Pressure Line
1/4" Pressure Line
1/4" Pressure Line
1/4" Pressure Line
1/4" Pressure Line
1/4" Pressure Line
Pressure Loop
Pressure Loop
Pressure Loop
Pressure Loop
Pressure Loop
Pressure Loop
Pressure Loop
Pressure Loop
Pressure Loop
Pressure Loop
Pressure Loop
Pressure Loop
Pressure Loop
Pulse Hose
• 1300 PSI working pressure
• Available with either plug-end or open
flow with solid/swivel connects
• 3/8" MPT on both styles
Part No.
Description
381118
381124
381128
381136
18" with Plug End
24" with Plug End
28" Solid/Swivel - Open
36" Solid/Swivel - Open
• Very flexible
• Available by the foot
or 100' rolls
Part No.
Size: ID x OD
PSI
Description
4-02080000
4-02090000
1/4" x 1/2"
1/4" x 1/2"
50
250
Clear Vinyl /ft
Braided Vinyl /ft
LANDA 37
HOSES & HOSE REELS
Legacy Rawhide Hose
Superior abrasion-resistant cover hose for use with: hot- or cold-water pressure Washer
All standard 3/8” RAWHIDE assemblies include:
■
1 solid end and 1 swivel end
■
Class A ORS (Oil Resistance Standard) for longer life
■
8" molded vinyl, color coded bend restrictors
(both ends)
■
Superior flexibility
■
Temperature up to 275°F
■
Durable wrapped finish outer cover
Rawhide 1-Wire 3000 PSI Blue
& Yellow Non-Marking Hose
Rawhide 1-Wire
4000 PSI Black Hose
ANIMAL FAT RESISTANT
Part No.
Size
Temp
PSI
Approx Wt - lbs
250°F
250°F
250°F
250°F
250°F
250°F
250°F
250°F
4000
4000
4000
4000
4000
4000
4000
4000
6.00
7.00
10.00
12.00
17.00
23.00
34.00
25' x 3/8" ID
30' x 3/8" ID
40' x 3/8" ID
50' x 3/8" ID
75' x 3/8" ID
100' x 3/8" ID
150' x 3/8" ID
500' x 3/8" ID
Size
Temp
PSI
Approx Wt - lbs
250°F
250°F
250°F
250°F
3000
3000
3000
3000
12.00
17.00
23.00
250°F
250°F
250°F
250°F
250°F
3000
3000
3000
3000
3000
12.00
17.00
23.00
34.00
250°F
250°F
250°F
3000
3000
3000
8.00
16.00
3/8" Yellow Hose
3/8" Black Hose
158265
158270
158275
158280
158285
158290
158295
158200*
Part No.
158980
158985
158990
158900*
50' x 3/8" ID
75' x 3/8" ID
100' x 3/8" ID
500' x 3/8" ID
3/8" Blue Hose
158780
158785
158790
158795
158700*
50' x 3/8" ID
75' x 3/8" ID
100' x 3/8" ID
150' x 3/8" ID
500' x 3/8" ID
1/4" Blue Hose
158880
158890
158800*
50' x 1/4" ID
100' x 1/4" ID
500' x 1/4" ID
*500 ft reel, 50 ft incremental lengths (max 3 pieces)
Legacy Rawhide 2-Wire 3/8" Hose
All black 2-wire Legacy Rawhide hose is now rated at 6000 PSI!
2-Wire RAWHIDE assemblies include:
Part No.
Size
Temp
PSI
Approx Wt - lbs
275°F
275°F
275°F
275°F
275°F
275°F
6000
6000
6000
6000
6000
6000
9.00
17.00
25.00
33.00
48.00
■
1 solid end and 1 swivel end
■
6000 PSI rating(5000 PSI on Blue)
■
8" bend restrictors (both ends)
■
Durable wrapped finish outer cover
■
Superior flexibility
■
Beefed up high tensile steel wire
braid
■
Higher abrasion resistance
*500 ft reel, 50 ft incremental lengths (max 3 pieces)
■
New Temperature up to 275°F
3/8" BLUE Hose
3/8" Black Hose
159305
159310
159315
159320
159325
159300*
154415
154425
38 LANDA
25' x 3/8" ID
50' x 3/8" ID
75' x 3/8" ID
100' x 3/8" ID
150' x 3/8" ID
500' x 3/8" ID
50' x 3/8" ID
100' x 3/8" ID
275°F
275°F
5000
5000
17.00
33.00
HOSES & HOSE REELS
Your One Stop Shop for Parts
Legacy Ultima Hose
Wrapped cover hose with a smaller outside diameter for even greater flexibility!
All standard Ultima assemblies include:
1 solid end and 1 swivel end
■
50% greater flexibility
■
8" molded vinyl color coded bend restrictors (both ends)
■
Temperature up to 275°F
■
Wrapped impression, maximum oil resistant tube and cover
■
Ultima 1-Wire 3000 PSI Black Hose
Part No.
Size
Approx Wt - lbs
15' x 3/8" ID
25' x 3/8" ID
50' x 3/8" ID
75' x 3/8" ID
100' x 3/8" ID
150' x 3/8" ID
Full Reel
5.0
7.0
13.0
19.0
25.0
37.0
25' x 1/2" ID
50' x 1/2" ID
75' x 1/2" ID
100' x 1/2" ID
Full Reel
7.50
14.00
21.00
27.00
*Full Reel – 500 ft per reel, hose only, 50 ft incremental lengths (max 3 pieces)
1/4" Black Hose
151025
151030
151050
151075
151090
151000*
Size
Approx Wt - lbs
154215
154225
154250
154275
154290
154294
154000*
15' x 3/8" ID
25' x 3/8" ID
50' x 3/8" ID
75' x 3/8" ID
100' x 3/8" ID
150' x 3/8" ID
Full Reel
5.75
8.00
15.00
22.00
28.00
42.00
25' x 1/2" ID
50' x 1/2" ID
75' x 1/2" ID
100' x 1/2" ID
Full Reel
9.25
18.00
26.80
35.50
1/2" Black Hose
1/2" Black Hose
155425
155450
155475
155499
155400*
Part No.
3/8" Black Hose
3/8" Black Hose
153550
153555
153570
153575
153590
153595
153000*
Ultima 2-Wire 5000 PSI Black Hose
25' x 1/4" ID
30' x 1/4" ID
50' x 1/4" ID
75' x 1/4" ID
100' x 1/4" ID
Full Reel
5.00
6.00
10.00
15.00
20.00
*Full Reel – 700 ft per reel, hose only, 50 ft incremental lengths (max 3 pieces)
155725
155750
155775
155790
155700**
*Full Reel – 500 ft per reel, hose only, 50 ft incremental lengths (max 3 pieces)
**Full Reel – 330 ft per reel, hose only (max 3 pieces)
Part No.
Custom Lengths
3/8" Hose
154000
150204*
150202*
per ft / hose only
add fitting(s) and bend restrictor
add fitting(s) only
*Assembly – Add to cost of custom length (labor & fittings - 1 solid, 1 swivel)
1/2" Hose
Part No.
Custom Lengths
3/8" Hose
153000
150232*
150205*
per ft / hose only
add fitting(s) and bend restrictor
add fitting(s) only
155700
150224*
150222*
per ft / hose only
add fitting(s) and bend restrictor
add fitting(s) only
*Assembly – Add to cost of custom length (labor & fittings - 1 solid MPT, 1 swivel MPT)
High Pressure Hose
1/2" Hose
155400
150220*
150222*
per ft / hose only
add fitting(s) and bend restrictor
add fitting(s) only
GREAT VALUE! Econimically priced 1-wire and 2-wire hose with a durable
wrapped cover.
•
•
•
•
1/4" Hose
151000
150210*
150212*
per ft / hose only
add fitting(s) and bend restrictor
add fitting(s) only
Temperature: 250°F
4 to 1 burst rating
3/8" MPT Swivel x 3/8" MPT Solid
Durable wrapped cover
*Assembly – Add to cost of custom length (labor & fittings - 1 solid, 1 swivel)
Part No.
Size
Wire
PSI
153350
153390
153355
153395
50' x 3/8" ID
100' x 3/8" ID
50' x 3/8" ID
100' x 3/8" ID
1-wire
1-wire
2-wire
2-wire
3000
3000
4500
4500
LANDA 39
HOSE & HOSE REELS
Hobby Hose
Replacement hose for most hobby pressure Washer sold by mass retailers.
•
•
•
•
•
•
•
Thermoplastic cover
Fiber-braid reinforcement
2250 PSI working pressure
9000 PSI burst pressure
M22 x 1.5 fitting inlet
14mm seal cone fits Karcher, Generac & Excell
15mm seal cone fits Campbell, MI-T-M
Part No.
Seal Cone
ID
Length
150245
150246
14mm
15mm
1/4"
1/4"
25 ft
25 ft
4-02010025M*
22mm
1/4"
25 ft
Orange 600
& Ribbed PVC Sprayer Hose
Braid reinforced PVC hose designed specifically for AG/ Pest control
spraying applications.
•
•
•
•
•
Part No.
Tough Ribbed Cover
Color - Orange
600 PSI max pressure
Bulk Hose Standard in 300' Single Length Coils
Resists Abrasion and UV Rays
Length
3/8" Hose - Orange
150630
150634
150636
150632
NOTE: See Hobby Gun and Lance on page 33.
*Both Ends
300' Coil (Single, Uncut Length)
50' Length (Bulk)
100' Length (Bulk)
Per Foot (Minimum 25')
1/2" Hose - Orange
150601
150603
150606
150602
Whitewater
Combination Steam Hose
®
Good up to 3000 PSI / 250°F or 350 PSI / 325°F (1/2" hose 2500 PSI max).
• Single high-tensile steel
wire braid
• High temperature
bend restrictors –
both ends
• Seamless innertube
• Solid 3/8" or 1/2" MPT
connectors – both ends
(Swivel ends NOT available)
• Oil-resistant cover
300' Coil (Single, Uncut Length)
50' Length
100' Length
Per Foot (Minimum 25')
3/4" Hose - Orange
150660
150662
300' Coil (Single, Uncut Length)
Per Foot (Minimum 25')
NOTE: All Above Hoses Can Be Custom Fitted – with MPT Fittings, Male or Female Garden Hose Solid
or Swivel Fittings, with or without Bend Restrictors, etc. Combinations Are Too Numerous To List –
CALL FOR CUSTOM ASSEMBLY PRICING!
Hose Bend Restrictors
Part No.
Size
PSI
30'
50'
25'
75'
100'
Full Reel
up to 3000
up to 3000
up to 3000
up to 3000
up to 3000
25'
50'
75'
100'
Full Reel
up to 2500
up to 2500
up to 2500
up to 2500
• Top quality molded fit bend
restrictors
• Fits snugly to prevent kinks near
the connectors
• Non-slip sure fit
• Easy installation, 325°F
3/8" Hose
153930
153950
153925
153975
153990
153900*
1/2" Hose
155625
155650
155675
155690
155600*
Part No.
Size
Hose Size/Type
Color/Material
150166
150161
150164
150170
150168
150174
150172*
5.3"
6.0"
6.0"
7.0"
7.0"
6.5"
6.5"
1/4" 1 wire
3/8" 1 wire
3/8" 2 wire
1/2" 1 wire
1/2" 2 wire
3/8" Combo
1/2" Combo
Black Vinyl
Black Vinyl
Red Vinyl
Black Vinyl
Red Vinyl
Gray Vinyl
Black Rubber
*Insulated Rubber
Garden Hose - APEX Quality
• Rated for cold water use
• Reinforced hoses for flexibility & strength
in all weather
• Assemblies complete with bend restrictor
• 5/8" or larger ID for full flow
• Commercial grade has machined octagonal
“wrench tight” fittings
*500 ft per reel, hose only, 50 ft incremental lengths (max 3 pieces)
Part No.
Custom Lengths
3/8" Hose
153900
150215*
150216*
per ft / hose only
add fitting(s) and bend restrictor
add fitting(s) only
1/2" Hose
155600
150230*
150228*
per ft / hose only
add fitting(s) and bend restrictor
add fitting(s) only
*Assembly – Add to cost of custom length (labor & fittings - 2 solid MPT)
40 LANDA
Part No.
Size
ID
PSI
Color
121315
50'
5/8"
Com
Gray
121319
100'
5/8"
Com
Gray
121332
50'
5/8"
HD
Lt. Green
121336
100'
5/8"
HD
Lt. Green
All Rubber Reinforced Hot Water (160°F) Hose
121344
50'
5/8"
Com
Red
121348
50'
3/4"
Com
Red
HOSE & HOSE REELS
Your One Stop Shop for Parts
Connector Hose - 2' - 10'
Connector hose come with 1 solid / 1 swivel end. NOTE: Add suffix “B” to include 6" bend restrictor.
Part No.
Lengths
Part No.
Lengths
154107
154108
154109
154110
7'
8'
9'
10'
2'
3'
4'
5'
6'
NOTE: Add suffix “B” to include Bend Restrictors
Part No.
Lengths
2'
3'
4'
5'
6'
Part No.
Lengths
155702
155703
155704
155705
155706
2'
3'
4'
5'
6'
155707
155708
155709
155710
7'
8'
9'
10'
Part No.
Lengths
151007
151008
151009
151010
7'
8'
9'
10'
NOTE: Add suffix “B” to include Bend Restrictors
Part No.
Lengths
153007
153008
153009
153010
7'
8'
9'
10'
3/8" Ultima - 1 wire 3000 PSI
153002
153003
153004
153005
153006
Lengths
1/2" Ultima - 2 wire 5000 PSI
3/8" Ultima - 2 wire 5000 PSI
154102
154103
154104
154105
154106
Part No.
Part No.
Lengths
1/4" Ultima - 1 wire 3000 PSI
NOTE: Add suffix “B” to include Bend Restrictors
151002
151003
151004
151005
151006
2'
3'
4'
5'
6'
NOTE: Add suffix “B” to include Bend Restrictors
Connector Hose / Carwash Bay Hose - 12' - 25'
All Carwash Bay hose come with Solid Male Pipe on both ends. Add suffix “B” to include bend restrictors on one end. See other options
at the bottom of this page.
Part No.
Lengths
Part No.
Lengths
261219
261220
261221
261222
261223
261224
261225
19'
20'
21'
22'
23'
24'
25'
3/8" Ultima - 1 wire 3000 PSI
261212
261213
261214
261215
261216
261217
261218
12'
13'
14'
15'
16'
17'
18'
Lengths
12'
13'
14'
15'
16'
17'
18'
NOTE: Add suffix “B” to include Bend Restrictors
Part No.
Lengths
261312
261313
261314
261315
261316
261317
261318
12'
13'
14'
15'
16'
17'
18'
261319
261320
261321
261322
261323
261324
261325
19'
20'
21'
22'
23'
24'
25'
Part No.
Lengths
261369
261370
261371
261372
261373
261374
261375
19'
20'
21'
22'
23'
24'
25'
NOTE: Add suffix “B” to include Bend Restrictors
Part No.
Lengths
261119
261120
261121
261122
261123
261124
261125
19'
20'
21'
22'
23'
24'
25'
1/4" Apex 3000 - 1 wire 3000 PSI
261112
261113
261114
261115
261116
261117
261118
Lengths
3/8" Blue - 1 wire 3000 PSI
NOTE: Add suffix “B” to include Bend Restrictors
Part No.
Part No.
Part No.
Lengths
1/4" Blue - 1 wire 3000 PSI
261362
261363
261364
261365
261366
261367
261368
12'
13'
14'
15'
16'
17'
18'
NOTE: Add suffix “B” to include Bend Restrictors
LANDA 41
HOSE & HOSE REELS
“Field” Attachable Couplings
Design and Build Your Own Hose or Adapt and Repair Hose in the Field (No Crimper Required)
Couplings for 1 Wire Braid Hose
Couplings for 2 Wire Braid Hose
Part No.
ID x MPT
Type
Part No.
ID x MPT
Type
150502
150505
150510
150511
150513
150515
150516
150518
1/4" x 1/4"
1/4" x 1/4"
3/8" x 1/4"
3/8" x 3/8"
3/8" x 3/8"
1/2" x 3/8"
1/2" x 1/2"
1/2" x 1/2"
Solid
Swivel
Solid
Solid
Swivel
Solid
Solid
Swivel
150532
150535
150540
150541
150543
150546
150548
1/4" x 1/4"
1/4" x 1/4"
3/8" x 1/4"
3/8" x 3/8"
3/8" x 3/8"
1/2" x 1/2"
1/2" x 1/2"
Solid
Swivel
Solid
Solid
Swivel
Solid
Swivel
Clear PVC Tubing
Clear Vinyl Tubing
• Also sold in Box of 100 ft
• 25°F to 150°F
• Very flexible – Non-reinforced
• Packaged in self-dispensing box
• “Box Pak” 100 ft
• 25°F to 150°F
• Very flexible – Non-reinforced
• Packaged in self-dispensing box
Part No.
ID
121070
121106
1/4" 3/8" 55
1/2" 5/8" 30
OD
WP @70°
Part No.
ID
4-02080000
1/4" 1/2" 100
OD
Box of 100'
Box of 100'
Multi-use industrial grade tubing with high resistance to chemicals,
solvents & fuel.
• Reinforced with polyester cord
• Huge selection of sizes and lengths
• 4 to 1 Burst Safety Factor
Part No.
Industrial PVC hose with black seamless inner tube, polyester braid reinforced
tough outer cover. Excellent for use as supply lines or bypass lines. Typically
used for air hoses.
• Looks & feels
like rubber
• Smooth dirt& oil-resistant finish
• Super flexible
• Abrasion-resistant cover
• Burst-rated 3 times WP
ID x OD
WP @ 70°
Red Cover, heavy wall
121081
3/8" x .634"
121083
3/8" x .634"
121087
1/2" x .792"
121089
1/2" x .792"
121097
3/4" x 1.14"
121099
3/4" x 1.14'
300
300
250
250
160
160
50'
500'
50'
500'
50'
300'
Black Cover, standard wall
121143
1/4" x .475"
121147
3/8" x .614"
121148
3/8" x .614"
121153
1/2" x .752"
250
250
250
250
300'
100'
300'
300'
Blue Cover, standard wall
121160
1/4" x .475"
121165
3/8" x .614"
121166
3/8" x .614"
250
250
250
100'
100'
300'
42 LANDA
Sold by the Foot, Specify Length
Clear Reinforced PVC Tubing
Roll Length
Flex Line Bypass /
Supply Line Hose
Part No.
WP @70° Roll Length
Roll Length
121031
121032
121033
121034
4-02090000
121036
121037
121038
121039
121041
121042
121043
121044
121046
121047
121048
121049
121051
121052
121053
121054
121059
121060
121061
121063
ID x OD
WP @ 70°
1/4" x 3/8"
1/4" x 3/8"
1/4" x 3/8"
1/4" x 3/8"
1/4" x 1/2"
3/8" x 1/2"
3/8" x 1/2"
3/8" x 1/2"
3/8" x 1/2"
1/2" x 3/4"
1/2" x 3/4"
1/2" x 3/4"
1/2" x 3/4"
5/8" x 7/8"
5/8" x 7/8"
5/8" x 7/8"
5/8" x 7/8"
3/4" x 1"
3/4" x 1"
3/4" x 1"
3/4" x 1"
1" x 1-1/4"
1" x 1-1/4"
1" x 1-1/4"
1" x 1-1/4"
25
50
100
300
25
50
100
300
25
50
100
300
25
50
100
300
25
50
100
300
25
50
100
200
Roll Length
250'
250'
250'
250'
Sold by Foot
175'
175'
175'
175'
175'
175'
175'
175'
140'
140'
140'
140'
140'
140'
140'
140'
75'
75'
75'
75'
HOSE & HOSE REELS
Your One Stop Shop for Parts
Revolutionary 360˚ Swivel Design
360° Pivot Reel
he Rapid Reel Pivot Reel takes the muscle and pain out of fighting
high-pressure hoses and keeps them safely stored away from traffic.
Featuring a sturdy, lockable, 360° swivel design, the Pivot Reel
is always aligned with the hose for tangle-free pressure washing.
Features a sturdy, lockable 360° pivot design. Numerous mounting options.
These patented pivot reels are always aligned with the hose for tangle-free
pressure washing. Rated at 5000 PSI and 325°F.
The Pivot Reel offers two types
of hose reels: pivot and standard (non-pivot).
All are rated at 5000 PSI and
325°F to meet maximum limits of
standard 3/8" pressure Washer.
Reels carry a two-year warranty.
Pivot Reels have a number of
distinctive features, including
stainless steel rotor and dual
seal swivel, “flip-over” hose
guide, spring-action pin to
prevent slippage when winding
hose and easy-to-engage
cam-lever brake.
Part No.
Length
4-02751030
4-02752030
100' x 3/8"
200' x 3/8"
NOTE: Hose not included
Pivot Mounting Brackets
Select one of the pivot reels above and simply bolt it to any of these brackets
or kits.
■
Pivot Design: Engineered to keep the reel constantly in alignment with the
hose for tangle-free washing.
■
Swivel Action: Designed specifically for pressure Washer with stainless steel
rotor and dual seals backed by two-year
leak-free guarantee.
4-02751036
4-02751032
4-02751031
Part No.
Description
4-02751036
Pivot Reel Wall Mount
4-02751032** Universal Bracket mount
4-02751031
PHW, OHW, HOT
■
‘Flip-Over’ Hose Guide: For ease
in winding and unwinding as well as
keeps hands clean and injury free.
■
Slip Protection: Spring-action,
stainless steel pin is quickly engaged
or disengaged to prevent slippage
during reel operation.
■
Cam-Lever Brake: Made of durable
components, turns on and off with the flick of a finger.
■
Hose Attachment: Innovative design protects hose from hard pulls so that the
strain is absorbed by a cushioned hose clamp.
360°
*Wall stud plate is drilled for 16", 20" and 24" studs. Wall mount bracket is needed
for installation with this.
**Universal bracket mounts to any round pipe, square tube or angle iron up to 1-1/2" in size.
LANDA 43
HOSE & HOSE REELS
Non-Pivot Hose Reels
Rapid Reel Swivels
Versatile line for high-pressure hose. Numerous mounting options. High-pressure
reels carry a 2-year warranty and are rated at 5000 PSI and 325°F.
Rapid Reel’s very own swivel is designed specifically for pressure Washer
and is the ONLY swivel guaranteed not to leak for 2 years! A stainless rotor
and unique dual seal deliver extra long life.
• 5000 PSI
• Stainless steel rotor
Non-pivot reels are designed
to be bolted to one of the mounting
brackets listed under “Non-Pivot
Mounting Brackets”.
Front View
Part No.
Length
4-02751025
4-02751026
100' x 3/8"
200' x 3/8"
• Unique dual seal for extra
long life
• 2 year warranty
Part No.
Description
PSI
4-02751028
4-02751029
Rapid Reel Swivel, 1/2" FPT x 3/8" FPT
Rapid Reel Swivel Repair Kit
5000
Cox Hose Reels
Cox reels offer high performance in a very compact and lightweight hand crank
hose reel. Perfect for mobile application and permanent floor and wall mount.
NOTE: Hose not included
Non-Pivot Mounting Brackets
•
•
•
•
Select one of the non-pivot reels and simply bolt it to any of these brackets or kits.
368159
4-02750003
4-02750001
4-02751044
Part No.
Description
4-02750001
4-02750002
4-02750003
4-02750004
4-02750008
95-07121213
4-020362
4-020363
4-020368
4-020369
4-020366
175' x 3/8"
3000
50' x 3/8"
4000
100' x 3/8"
4000
100' x 1.5"
600
100' x 1"
300
Mounting Bracket, Horizontal Coil Machines
Replacement Swivel, 1/2"
Replacement Swivel, 3/8"
Swivel Repair Kit
Handle Replacement
Locking Pin Assy
PSI
4-02751042
4-02751043
Part No.
Description
386159
4-02751060
4-02751044
4-02751043
Base Mount, Non-Pivot Reel, Wall or Flatbed
Support Arm, 45°, Non-Pivot Reel
Support Arm, 90°, Non-Pivot Reel
Vertical Support Arm, Non-Pivot Reel
44 LANDA
Rated up to 4000 PSI
-20°F to 225°F
Adjustable drag brake
90° brass swivel
HOSE & HOSE REELS
Your One Stop Shop for Parts
AP Hose Reels
AP hose reels have been designed to perfectly balance ruggedness and durability with affordability.
•
•
•
•
•
Swivel Repair Kits
Part No.
4-0203611
Flared flanges for maximum capacity
Solid center core for maximum strength
Rolled beaded edge flanges for maximum safety
Easy mounting options for maximum versatility
“Posi-Pin” lock, prevents unwanted dereeling
•
•
•
•
•
Heavy-duty powder coated steel
Easy access external swivel
4000 PSI working pressure
Rated temp: 225°F
3/8" or 1/2" Inlet/Outlet
Part No.
Hose Dia
Capacity
Core Width
Flange Width
Flange Dia
Overall Height
386188
4-02755030
386206
386209
3/8"
3/8"
3/8"
1/2"
50'
100'
150'
100'
4.3"
8.7"
6.3"
6.3"
7.9"
12.2"
10.2"
10.2"
10.5"
10.5"
13.0"
13.0"
13.0"
13.0"
16.7"
16.7"
NOTE: Hose is not included. See page 41 for connector hoses.
Replacement Swivels
See pages 49-50
•
•
•
•
•
Super-reinforced core – Won’t collapse!
Adjustable brake for controlled reel tension
Convenient external swivel
Manual rewind handle included
Solid core bolts onto flanges for extra strength
•
•
•
•
225°F
Snap lock to prevent accidental dereeling
Bearings have oil cap for easy field maintenance
4000 PSI working pressure
Professional Size Reel
Swivel Repair Kits
Part No.
Hose Dia.
075130
075128
110025*
3/8"
1/2"
*For Round Swivels
Replacement Swivels
See pages 49-50
Part No.
Hose Dia
Capacity
Reel Size Width
Reel Size Dia
386174
386175
386176
386181
386182
3/8"
3/8"
3/8"
1/2"
1/2"
150'
300'
350'
200'
270'
6"
10"
14"
10"
14"
18"
18"
18"
18"
18"
NOTE: Hose is not included. Interchangeable parts available. See page 41 for connector hoses.
Space Saver Reel
Part No.
Hose Dia
Capacity
Reel Size Width
Reel Size Dia
386171
386172
386173
386178
386179
3/8"
3/8"
3/8"
1/2"
1/2"
90'
140'
200'
115'
150'
6"
10"
14"
10"
14"
14"
14"
14"
14"
14"
NOTE: Hose is not included. Interchangeable parts available. See page 41 for connector hoses.
LANDA 45
COUPLERS, FITTINGS & FILTERS
Quick Couplers
Brass Couplers, designed for 4,000 PSI and extended durability. Affordable and rugged all in one.
• Precision brass design
• Unrestricted free flow
• 4000 PSI max
• Zinc plated
• Hardened steel
• 4000 PSI max
Part No.
Description
Part No.
Description
2-2000
2-2002
2-20180
1/4" FPT
3/8" FPT
1/2" FPT
2-2001
2-2003
2-20181
1/4" MPT
3/8" MPT
1/2" MPT
Steel Nipples, hardened steel combined with zinc yellow chromate plating holds up
to the harshest environments.
Part No.
Description
Part No.
Description
2-2004
2-20040
2-2006
2-2018
1/4" FPT
1/4" x 1/8" FPT
3/8" FPT
1/2" FPT
2-2005
2-2007
2-2017
1/4" MPT
3/8" MPT
1/2" MPT
Stainless Steel Couplers, made of 303 stainless steel, these are “built to last”.
• Chemical resistant
• 303 stainless steel
• 4000 PSI max
Part No.
Description
Part No.
Description
2-2000SS
2-2002SS
1/4" FPT
3/8" FPT
2-2001SS
2-2003SS
1/4" MPT
3/8" MPT
Stainless Steel Nipples, provide extra long life and protection against corrosion.
• Chemical resistant
• 303 stainless steel
• 4000 PSI max
Part No.
Description
Part No.
Description
2-20041
2-20061
1/4" FPT
3/8" FPT
2-20051
2-20071
1/4" MPT
3/8" MPT
Parker Quick Couplers
Parker Brass Couplers are built to stringent standards to provide a durable, safe connection.
• Best name
in the industry
• High quality brass
construction
• 3500 PSI
Part No.
Description
Part No.
Description
2-2000P
2-2002P
1/4" FPT
3/8" FPT
2-2001P
2-2003P
1/4" MPT
3/8" MPT
Parker Safety Lock Couplers provide maximum safety and eliminates accidental disconnection.
• Prevents accidental
disconnecting
• Reduces liability
• 3500 PSI
Part No.
Description
Part No.
Description
2-20000
2-20020
1/4" FPT
3/8" FPT
2-20010
2-20030
1/4" MPT
3/8" MPT
Parker Steel Quick Coupler Nipples, are hardened and zinc plated to provide superior durability.
•
•
•
•
46 LANDA
Hardened steel
Zinc plated
The industry leader
3500 PSI
Part No.
Description
Part No.
Description
2-2004P
2-2006P
1/4" FPT
3/8" FPT
2-2005P
2-2007P
1/4" MPT
3/8" MPT
COUPLERS, FITTINGS & FILTERS
Your One Stop Shop for Parts
O-Rings
O-Rings for AP, Hansen, Foster, Parker, and other quick-coupler brands. Buna to 210°F, HNBR, EPDM
to 280°F and Viton to 300°F and aggressive chemicals.
Part No.
Description
Part No.
Description
075033
2-01193
2-01213
ORE114
2-0119
2-0121
1/8" QC EPDM
1/4" QC EPDM
3/8" QC EPDM
1/2" QC EPDM
1/4" QC HNBR
3/8" QC HNBR
075034
075036
075038
075042
2-011900
2-012100
1/4" QC Buna
3/8" QC Buna
1/2" QC Buna
1/4" QC Viton
3/8" QC Viton
1/2" QC Viton
Hansen Quick Connective Couplers
Built by the company that invented Quick Connective Couplers in 1915. Designed and built to perform even in the
toughest pressure washing applications.
• Precision performance
• Unrestricted bore for free flow
• Resists plug deformation when pressure spikes
occur and withstands pump pulse
Part No. - MPT
Part No. - FPT
Description
331010
331015
331020
331025
331045
331012
331011
331016
331021
331026
331044
1/8" Brass Coupler Socket
1/4" Brass Coupler Socket
3/8" Brass Coupler Socket
1/2" Brass Coupler Socket
3/4" Brass Coupler Socket
1/8" SS Coupler Socket
1/4" SS Coupler Socket
3/8" SS Coupler Socket
1/2" SS Coupler Socket
1/8" Plugs, Steel, Zinc-plated
1/4" Plugs, Steel, Zinc-plated
1/4" Plugs, Steel, Zinc-plated
3/8" Plugs, Steel, Zinc-plated
3/8" Plugs, Steel, Zinc-plated
1/2" Plugs, Steel, Zinc-plated
1/2" Plugs, Steel, Zinc-plated
3/4" Plugs, Steel, Zinc-plated
3/4" Plugs, Steel, Zinc-plated
1/4" Plugs, Hardened SS
1/4" Plugs, Hardened SS
3/8" Plugs, Hardened SS
3/8" Plugs, Hardened SS
1/2" Plugs, Hardened SS
1/2" Plugs, Hardened SS
331110
331115
Pressure Rating Service
Series
w/Steel Plug
PSI
w/Brass Plug
PSI
w/Stainless Steel
PSI
1/8"
1/4"
3/8"
1/2"
3/4"
2,600
5,500
3,500
2,700
1,700
2,500
5,200
2,700
2,200
1,700
4,200
6,700
5,500
3,000
1,700
331017
331413
331031
331111
331116
331120
331121
331125
331126
331127
331144
331117
331118
331122
331123
331112
331113
LANDA 47
COUPLERS, FITTINGS & FILTERS
Twist Seal Couplers
11,000 PSI Quick Couplers
Allows U.S. Standard Hoses to Connect to European (22mm) Fittings.
Snaptite Quick Sockets and Plugs are precision built for extreme high pressure.
• Internal O-ring seal
• Machined brass body
• High-impact plastic knob
• 11,000 PSI max
• -40°F to 250°F
• Must be used with 11,000 PSI socket
or plug
• 7.8 GPM
• 3600 PSI
• 302°F
Part No.
Description
2-2110
2-2113
1/4" FPT
3/8" FPT
2-21100
2-21131
1/4" MPT
3/8" MPT
Plugs are made of heavy-duty machined brass for a safe and leak free connection.
Part No.
Description
2-2112
2-2114
1/4" FPT
3/8" FPT
2-2116
2-2115
1/4" MPT
3/8" MPT
• Zinc Chromate
• Used on equipment of 4000 PSI
and above
Part No.
Description
2-20023
2-200231
2-20021
1/4" FPT Socket
1/4" MPT Socket
3/8" FPT Socket
2-20024
2-20028
2-20022
2-20027
1/4" FPT Plug
1/4" MPT Plug
3/8" FPT Plug
3/8" MPT Plug
Replacement “U” Packing Seals
2-0132
1/4" Snaptite
2-01321
3/8" Snaptite
Double Shut-Off Couplers & Plugs
O-rings, viton
Part No.
Description
109286
O-rings (Viton)
Double Quality Twist Seal Couplers
Couples U.S. Standard Pipe Threads to 22mm European Fittings Found
on Imported Pressure Washer.
• Internal O-ring with back ring seal
assures no-leak operation
• Oversized high-impact plastic knob
• Machined brass body
Sockets
•
•
•
•
7.8 GPM
4000
302°F
3.9 to 4.2 oz weight
Part No.
Description
331205PA
331207PA
331209PA
1/4" FPT
3/8" FPT
1/2" FPT
331204PA
331206PA
331208PA
1/4" MPT
3/8" MPT
1/2" MPT
Part No.
Description
331305PA
331307PA
331309PA
1/4" FPT
3/8" FPT
1/2" FPT
331304PA
331306PA
331308PA
1/4" MPT
3/8" MPT
1/2" MPT
Part No.
Description
109286
109287
O-rings (Viton)
Back Ring
331501
• Quick disconnect without
drips and leaks
• Indispensible for in-plant
multiple station systems
• Machined construction brass,
zinc plated steel or stainless steel
331401
Part No.
Description
PSI
331401
331405
331406
331407
331408
331409
331410
1/8" FPT Socket (Brass)
1/4" FPT Socket (Brass)
3/8" FPT Socket (Stl Zinc)
3/8" FPT Socket (Brass)
1/2" FPT Socket (Brass)
1/2" FPT Socket (SS)
3/4" FPT Socket (Brass)
3000
2700
3700
2200
2250
4250
2000
331501
331505
331507
331508
1/8" FPT Plugs (Brass)
1/4" FPT Plugs (Brass)
3/8" FPT Plugs (Brass)
1/2" FPT Plugs (Brass)
3000
2700
2200
2250
• Nitrile up to 210°F
• Use Viton for 230°F and above
Plugs
O-rings
48 LANDA
Replacement O-rings
0RN013
O-ring 1/8" Nitrile
0RN110
O-ring 1/4" Nitrile
0RN112
O-ring 3/8" Nitrile
0RN114
O-ring 1/2" Nitrile
0RV110
O-ring 1/4" Viton
0RV112
O-ring 3/8" Viton
0RV114
O-ring 1/2" Viton
Your One Stop Shop for Parts
COUPLERS, FITTINGS & FILTERS
Two-Gun Tee Coupler
90° Swivels
Two-Gun Tee Coupler makes switching from one gun to two a snap. 3/8" quick
coupler fittings good up to 4000 PSI.
Excellent for Carwash Booms and Hose Reels. Remarkable value,
comparable to best swivels made.
• Forged Brass Body
• 4000 PSI
• 225°F
• For use with dual gun systems
• Couples onto outlet nipple
• 3/8" couplers
Part No.
Description
2-2014
Two Gun Splitter
Hose Clamps
Warning: Low pressure use only! Not for use on pressure washer discharge hose.
• Stainless steel band
and housing
• Worm gear tensions
Part No.
Band
OD
2-9000
2-9002
358013
358015
358018
2-9004
2-90041
2-9007
358024
4mm
5mm
10mm
H8
H10
H12
H16
H24
H32
5/16"
5/16"
5/16"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
358001X*
358004X*
358006X*
1/4" ID Speedi-Clamps
3/8" ID Speedi-Clamps
1/2" ID Speedi-Clamps
• Nylon “Speedi-Clamp”
tightens with a snap
• Releases with a twist
Part No.
Description
421043
421044
421045
421046
421047
110025
3/8" M x 3/8" F
3/8" F x 3/8" F
1/2" M x 1/2" F
1/2" F x 1/2" F
1/2" M x 3/8" F
Repair Kit
Swivels
• Swivels even at 3000 PSI
• Brass housing
• Stainless steel
flow-through bolt
Min - Max
.25 - .63
.38 - .88
.50 - 1.06
.44 - .91
.56 - 1.06
.69 - 1.25
.75 - 1.50
1.06 - 2.00
1.56 - 2.50
Part No.
Description
421010A*
421012A*
421014
421015
109198
109199
3/8" MPT x FPT
3/8" FPT x FPT
3/8" MPT x FPT, Brass
3/8" FPT x FPT, Brass
Seal Kit
Rebuild Kit
*Long Body Style
Stainless Steel High Pressure
& Economy Brass Swivels
*50 Pack
Spring Clamps
Spring tension, speed mount clamps
•
•
•
•
2-11059, 2-1106
Part No. Description
2-9040
2-9041
Spring clamps - .46 – .54
Spring clamps - .40 – .48
Swivels - Right Angle
421019
• Close tolerance fit
assures leakproof seal
• Teflon® ring provides
free swivel
421018
Part No.
Description
421018
421020
421019
075130
075128
Swivel - Stainless Steel 3/8"
Swivel - Brass 3/8"
Swivel - Brass 1/2"
Repair Kit - 3/8"
Repair Kit - 1/2"
•
•
•
•
360° swivel rotation
3/8" MPT inlet/outlet
4000 PSI - Brass
5000 PSI - SS
10.5 GPM (SS)
7.8 GPM (brass)
320°F (SS)
195°F (brass)
• Highly resistant
to harsh chemicals
• “Live” swivel
at full pressure
• 6 oz weight
421009
Part No.
Description
2-11059
2-1106
421009
109542
Swivel - 1/4" M x F
Swivel - 3/8" M x F
3/8" M x F
Repair Kit
Gun Swivel
Made of corrosion-resistant material and stainless steel self-lubricated bearings
the new gun swivel offers highest quality Swiss made craftsmanship.
• 4000 PSI
Part No.
Description
421057
421056
Gun Swivel DGV - 1/4" NPTF
Gun Swivel DVG - 3/8" NPTF
• 250°F
• 30 RPM
LANDA 49
COUPLERS, FITTINGS & FILTERS
Stainless Steel Swivels
• Swivels even at 4000 PSI
• 200°F
• All stainless construction
Part No.
Description
421016
421017
109198
109199
3/8" MPT x FPT
3/8" FPT x FPT
Seal Kit
Rebuild Kit
Bushings - Brass
• Teflon® swivel ring
• Rebuildable
• 3/8" in and out
Swivels freely even at maximum pressure level noted below.
• MPT x FPT all sizes
• Brass and Stainless Steel materials
1/4" x 1/8"
3/8" x 1/4"
1/2" x 1/4"
1/2" x 3/8"
3/4" x 3/8"
3/4" x 1/2"
Part No.
FPT
2-1013
2-1014
2-1015
2-1016
2-1017
1/8"
1/4"
3/8"
1/2"
3/4"
421004
Part No.
Description
PSI
421004
421005
421006
421007
421080
075060
1/4"
1/4"
3/8"
3/8"
1/4" 90°
Repair Kit
2000
3500
2000
3500
3500
Reducing Hex Couplings - Brass
Swivels - Stainless Steel Ball Bearing
• Hardened stainless
steel body
• Nitrile Buna seals
• 3500 PSI
• 180°F
Part No.
Description
421034
421036
421038
076101
076102
076103
1/4", 6.8 GPM
3/8", 10.6 GPM
1/2", 27.0 GPM
Repair Kit for 421036
Repair Kit for 421034
Repair Kit for 421038
• M x F NPT thread
• Ball-bearing design
ensures free swivel
action under pressure
• Suitable for extended
wear application
Part No.
Description
2-1095
2-1097
2-1098
2-1099
2-11010
1/4" x 1/8" F
3/8" x 1/4" F
1/2" x 1/4" F
1/2" x 3/8" F
3/4" x 1/2" F
Hex Double Nipples - Brass
Part No.
Description
2-1001
2-1003
2-1005
2-1007
2-1009
140764
1/8" x 1/8" M
1/4" x 1/4" M
3/8" x 3/8" M
1/2" x 1/2" M
3/4" x 3/4" M
1" x 1" M
Hex Reducing Nipples - Brass
Adapters - Brass
50 LANDA
MPT x FPT
2-1072
2-1074
2-1076
2-1077
2-1080
2-1081
Hex Couplings - Brass
Swivels - Ball Bearing
421080
Part No.
Part No.
FPT x MPT
140651
2-11031
2-1103
140650
2-1101
2-11020
2-11011
2-1102
2-1100
140660
140662
1/8" x 1/8"
1/4" x 1/8"
1/4" x 1/4"
3/8" x 1/8"
3/8" x 1/4"
3/8" x 3/8"
1/2" x 1/4"
1/2" x 3/8"
1/2" x 1/2"
3/4" x 1/2"
3/4" x 3/4"
Part No.
Description
2-1055
2-1056
2-1057
140757
2-1058
2-1059
1/4" x 1/8" M
3/8" x 1/8" M
3/8" x 1/4" M
1/2" x 1/4" M
1/2" x 3/8" M
3/4" x 1/2" M
Your One Stop Shop for Parts
Copper Tubing Connectors
2-1118
COUPLERS, FITTINGS & FILTERS
Nipples - Brass
2-1116
Part No.
Description
Material
2-1117
2-1118
2-1116
1/4" Tube x 1/8" MPT
1/4" Tube x 1/4" MPT
1/4" Tube x 1/8" MPT, 90° Elbow
Brass
Brass
Brass
Plastic Dip Tube Assembly
• New Style Plastic dip tubes
• Rubber bushing seal
ordered separately
Part No.
Description
2-010062
2-010063
2-010064
2-010061
MPG, VHW, MVP, HS, 7.5"
PHWS, OHW, HOT, 12"
Skids, 17.75"
Rubber bushing
Part No.
Description
2-1000
2-1002
2-1004
2-1006
2-1008
140703
140705
140711
140712
140713
140721
140723
140724
140731
140733
140742
140744
1/8" Close
1/4" Close
3/8" Close
1/2" Close
3/4" Close
1/8" x 1-1/2"
1/8" x 2-1/2"
1/4" x 1-1/2"
1/4" x 2"
1/4" x 2-1/2"
3/8" x 1-1/2"
3/8" x 2-1/2"
3/8" x 3"
1/2" x 1-1/2"
1/2" x 3"
3/4" x 2"
3/4" x 3"
90° Reducing Elbows - Brass
Copper Fuel Dip Tubes
“Old Style”
Part No.
Description
Material
2-10881
2-10882
2-10883
2-10884
PHW Fuel, 12"
HS Fuel, 6.5"
VHW Fuel, 7.5"
MHP Fuel, 17"
Brass
Brass
Brass
Brass
Part No.
Description
2-10410
140577
1/4" F x 1/8" F
3/8" F x 1/4" F
140583
140582
140585
140587
1/4" x 1/8" MPT
3/8" x 1/8" MPT
3/8" x 1/4" MPT
1/2" x 3/8" MPT
90° Elbows - Brass
JIC Nipples - Brass
2-1053
2-10632
Part No.
Description
2-1051
2-1052
2-1053
2-1054
2-10632
2-10633
2-10634
2-10635
2-10636
2-10941
1/2" JIC x 1/4" MPT
1/2" JIC x 3/8" MPT
1/2" JIC x 1/2" MPT
1/2" JIC x 3/4" MPT
1/2" JIC x 1/2" FPT
1/2" JIC x 3/8" FPT
1/2" JIC x 1/4" FPT
1/2" JIC x 3/4 FPT
3/4" JIC x 3/4" Pipe MPT
1/2" JIC x 3/4" GHF
Part No.
Description
140552
2-1018
2-1019
2-1020
2-1021
1/8" FPT
1/4" FPT
3/8" FPT
1/2" FPT
3/4" FPT
140584
140586
140588
1/4" x 1/4" MPT
3/8" x 3/8" MPT
1/2" x 1/2" MPT
LANDA 51
COUPLERS, FITTINGS & FILTERS
Street Elbows - Brass
Part No.
Description
2-10215
2-1022
2-1023
2-1024
2-1025
1/8" M x F - 90°
1/4" M x F - 90°
3/8" M x F - 90°
1/2" M x F - 90°
3/4" M x F - 90°
140632
2-10260
2-1026
2-1027
140642
1/8" M x F - 45°
1/4" M x F - 45°
3/8" M x F - 45°
1/2" M x F - 45°
3/4" M x F - 45°
Push-On - Brass Swivel
2-1105
Description
140852
2-1030
2-1031
2-1032
2-1033
1/8" F
1/4" F
3/8" F
1/2" F
3/4" F
Description
2-11062
2-1105
2-11050
1/4" Barb x 1/4" JIC Fem
1/2" Barb x 1/2" JIC Fem
3/4" Barb x 3/4" JIC Fem
Hose Barbs - Brass
Part No.
Description
2-10891
2-10864
140208
140210
140212
1/4" x 1/4"
3/8" x 3/8"
1/2" x 1/2"
5/8" x 5/8"
3/4" x 3/4"
2-1088
2-1089
2-10892
140372
140374
140375
140376
140377
140379
140384
1/4" x 1/8"
1/4" x 1/4"
3/8" x 1/4"
3/8" x 3/8"
3/8" x 1/2"
1/2" x 1/4"
1/2" x 3/8"
1/2" x 1/2"
5/8" x 3/8"
5/8" x 1/2"
140350
2-1084
2-1085
2-1086
140361
140351
2-10871
2-10862
140356
140353
140363
140359
140362
140364
2-10860
2-10861
140366
140367
140368
2-11063
1/8" X 1/4"
1/4" X 1/8"
1/4" x 1/4"
1/4" x 3/8"
1/4" x 1/2"
3/8" x 1/8"
3/8" x 1/4"
3/8" x 3/8"
3/8" x 1/2"
3/8" x 3/4"
1/2" x 1/4"
1/2" x 3/8"
1/2" x 1/2"
1/2" x 3/4"
5/8" x 3/8"
5/8" x 1/2”
5/8" x 3/4"
3/4" x 1/2"
3/4" x 3/4"
1/4" x fits Honda oil drain
Barb x Barb
Barb x Barb
Extruded or Forged Tees - Brass
Part No.
Part No.
90° Barb x MPT
90° Barb x MPT
Male Branch Tees - Brass
Barb x MPT
Part No.
Description
2-1037
2-1038
140879
1/4"
3/8"
1/2"
Barb x MPT
Street Tees - Brass
Part No.
Description
2-1040
2-1041
2-1042
140890
1/4"
3/8"
1/2"
3/4"
Female Crosses - Brass Extruded
Part No.
Description
140664
2-1034
2-1035
140672
1/4"
3/8"
1/2"
3/4"
Check Hose Barbs
• 1/4" MPT X 1/4" barb
• Brass body
• Buna or Viton check ball
Part No.
Description
385128
385129
Check Hose Barb - Viton
Check Hose Barb - Buna
52 LANDA
2-11063
Push-N-Lock Barbs
Part No.
Barb x MPT
Part No.
Barb x MPT
140252
140254
140255
140256
140257
140258
140259
140260
140261
1/4" x 1/8"
1/4" x 1/4"
1/4" x 3/8"
3/8" x 1/8"
3/8" x 1/4"
3/8" x 3/8"
3/8" x 1/2"
3/8" x 3/4"
1/2" x 1/4"
2-1108
2-1107
140264
140265
140266
140267
2-11080
2-11081
1/2" x 3/8"
1/2" x 1/2"
1/2" x 3/4"
5/8" x 3/8"
5/8" x 1/2"
5/8" x 3/4"
3/4" x 1/2"
3/4" x 3/4"
Your One Stop Shop for Parts
Swivel Hose Barbs - Low Pressure
• 300 PSI
• 210°F
• Brass MPT base with
steel hose barb
• Swivel easily at low
pressure to eliminate
twists and tangles in
chemical or water lines
COUPLERS, FITTINGS & FILTERS
Garden Hose Fittings
• MGH = Male Garden Hose
• FGH = Female Garden Hose
Part No.
Part No.
Description
140079
140081
140083
1/4" x 1/4"
3/8" x 3/8"
1/2" x 1/2"
• Heavy-duty Machined
Brass Fittings
Description
Swivel Fittings
140056
Orificed Hose Barb
• Inexpensive way to
create suction on inlet
side of pump
• Used in-line from float
tank to pump
Part No.
Description
140320
Orificed Hose barb
• One-piece machined brass
• 3/8" MPT x 5/8" barb
• Standard orifice 5/32" –
Drill up to 3/8" to fit
your need
140054
140050
2-10943
2-10942
2-1093
2-1094
140055
140002
140004
140006
3/4" FGH x 1/4" MPT
3/4" FGH x 3/8" MPT
3/4" FGH x 1/2" MPT
3/4" FGH x 1/2" FPT (S-1)
3/4" FGH x 3/4" FPT (S-2)
3/4" FGH x 3/4" FGH (S-3)
3/4" FGH x 1/2" Barb
3/4" FGH x 5/8" Barb
3/4" FGH x 3/4" Barb
Garden Hose Quick Couplers
331040
331140
Female Hose Coupler
Male Hose Plug
331040
Garden Hose Accessories
140020
2-1902
Drain Cocks
Part No. Description
140125
140127
2-1902
1/4" Fuel Drain
w/Tee Handle
1/4" Fuel Drain
w/Barb & Tee Handle
140038
Hex Head Plugs
Part No.
Description
140802
140804
2-1047
2-1048
2-1049
1/8"
1/4"
3/8"
1/2"
3/4"
Description
2-1044
2-1046
140806A
2-10461
1/8"
1/4"
3/8"
1/2"
Solid Fittings
2-1091
2-1092
2-10922
140028
140030
2-10921
2-10920
140026
3/4" MGH x 3/8" MPT
3/4" MGH x 1/2" MPT
3/4" MGH x 3/4" MPT
3/4" FGH x 1/2" FPT
3/4" FGH x 3/4" FPT
3/4" FGH x 1/2" MPT
3/4" FGH x 3/4" MPT
3/4" FGH X 3/4" FGH (SS)
Hose Barb Fittings
140303
Hex Socket Head Plugs
Part No.
Garden Hose Washer
Filter Screen Washer
(30 mesh)
140301
140303
140305
140307
140317
140319
140321
140323
3/8" Barb x 3/4" MGH
1/2" Barb x 3/4" MGH
5/8" Barb x 3/4" MGH
3/4" Barb x 3/4" MGH
3/8" Barb x 3/4" FGH
1/2" Barb x 3/4" FGH
5/8" Barb x 3/4" FGH
3/4" Barb x 3/4" FGH
Teflon® Thread Sealing Tape
• Big 1/2" x 520" roll
• Mil - spec #T27730
Pipe Thread Hex Nuts
Part No.
Description
140062
140064
2-1082
2-1083
140070
1/8"
1/4"
3/8"
1/2"
3/4"
Part No.
Description
2-9021
Thread Sealing Tape
LANDA 53
COUPLERS, FITTINGS & FILTERS
Zinc Plated Heavy Wall
Steel Pipe Fittings
JIC x Pipe Nipples
• Up to 6000 PSI working pressure (18000 PSI burst)
• Attractive zinc-plated protective coating
• US standard taper pipe threads
Part No.
MPT x FPT x MPT
2-00501
2-00510
2-0051
2-0052
1/2" JIC x 1/4" FPT
1/2" JIC x 3/8" FPT
1/2" JIC x 3/8" MPT
1/2" JIC x 1/2" MPT
Adapters
Part No.
MPT x FPT
PSI
142404
2-0069
2-0047
2-0071
142408
2-0072
142412
1/4" x 1/4"
1/4" x 3/8"
3/8" x 3/8"
3/8" x 1/2"
1/2" x 1/2"
1/2" x 3/4"
3/4" x 3/4"
6000
6000
6000
5000
5000
4000
4000
Part No.
FPT x FPT
PSI
2-0022
2-0023
2-0024
2-0025
1/4" x 1/4"
3/8" x 3/8"
1/2" x 1/2"
3/4" x 3/4"
6000
6000
5000
5000
142416
142418
142419
142421
3/8" x 1/4"
1/2" x 3/8"
1/2" x 1/4"
3/4" x 1/2"
6000
5000
5000
4000
Elbow
Part No.
FPT x FPT
PSI
142504
142505
2-0027
142507
2-0028
142509
2-0029
1/4" x 1/4"
1/4" x 3/8"
3/8" x 3/8"
3/8" x 1/2"
1/2" x 1/2"
1/2" x 3/4"
3/4" x 3/4"
5000
4500
4500
3000
3000
4000
4000
Coupling Hex
Close Nipple - Hex
Part No.
MPT x MPT
PSI
2-0004
2-0006
2-0008
142434
1/4" x 1/4"
3/8" x 3/8"
1/2" x 1/2"
3/4" x 3/4"
6000
6000
6000
6000
Part No.
MPT x FPT x MPT
PSI
2-0044
2-0045
2-0046
142687
1/4"
3/8"
1/2"
3/4"
5000
4500
3000
3000
Tee - 3 Connects
Part No.
FPT
PSI
2-0034
2-0035
2-0036
142662
1/4"
3/8"
1/2"
3/4"
5000
4500
3000
3000
Part No.
FPT
PSI
142664
2-0038
2-0039
2-1040
1/4"
3/8"
1/2"
3/4"
5000
4500
3000
3000
Cross - 4 Connects
2-0018
142428
2-0019
142431
3/8" x 1/4"
1/2" x 1/4"
1/2" x 3/8"
3/4" x 1/2"
6000
6000
6000
6000
Part No.
MPT x FPT
PSI
Part No.
MPT x FPT
PSI
2-0030
2-00301
2-0031
2-00271
2-0032
142443
142444
1/4" x 1/4"
1/4" x 3/8"
3/8" x 3/8"
3/8" x 1/2"
1/2" x 1/2"
1/2" x 3/4"
3/4" x 3/4"
5000
4500
4500
3000
3000
3000
3000
2-00682
142678
2-00681
142682
3/8" x 1/4"
1/2" x 1/4"
1/2" x 3/8"
3/4" x 1/2"
6000
6000
6000
6000
Reducing Bushing
Street Elbow
54 LANDA
Street Tee
Pipe Plugs - Hex
Part No.
MPT
PSI
142701
2-0048
2-0049
2-00491
1/4"
3/8"
1/2"
3/4"
6000
6000
6000
6000
COUPLERS, FITTINGS & FILTERS
Your One Stop Shop for Parts
Pipe Nipple - Zinc
Part No.
Length x MPT
Working PSI
Part No.
Length x MPT
Working PSI
142800
142801
142802
142803
142804
142805
142806
2" x 1/4"
3" x 1/4"
4" x 1/4"
2" x 3/8"
3" x 3/8"
4" x 3/8"
2" x 1/2"
6000
6000
6000
6000
6000
6000
6000
142807
142808
142808T
142810
142811
142812
142813
3" x 1/2"
4" x 1/2"
5" x 1/2"
2" x 3/4"
3" x 3/4"
4" x 3/4"
6" x 3/4"
6000
6000
6000
6000
6000
6000
6000
Galvanized Pipe Fittings
“The Big One”
• Pressed steel fittings - external galvanized for excellent chemical resistance
• Ideal for supply line (city water pressure) applications
(working pressure rating 125 PSI)
NOT recommended for high pressure piping applications
Larger, heavier, and with more filtering area than competitors’ filters
Pipe Street Elbows
Part No. MPT x FPT
142604
142606
142608
142610
1/4"
3/8"
1/2"
3/4"
• Corrosion-resistant plastic
• Stepped 1/4" & 3/8" hose barb
• Weighted to hold onto bottom of tank
Part No.
Description
340025
340026
With Check Valve
Without Check Valve
Brass Chemical Filter
50 mesh stainless steel screen. Removable mesh for easy cleaning.
Heavy-duty one-piece brass body holds the filter on the bottom of tank.
Pipe Tees
• 1/4" hose barb
• Stainless steel check ball
Part No. FPT x FPT x FPT
142854
142856
142858
142868
1/4"
3/8"
1/2"
3/4"
Part No.
Description
2-1905
2-1907
With Check Valve
Without Check Valve
Merchant Coupling
Part No. FPT x FPT
142454
142456
142458
1/4"
3/8"
1/2"
Plastic Chemical Strainer
Polypropylene and Brass Construction
• 7mm hose barb
Banded Coupling
Part No.
Description
340014
2-1904
with Check Valve
without Check Valve
Part No. FPT x FPT
142754
142756
142758
142760
1/4"
3/8"
1/2"
3/4"
Inline ClearView Filter
347091
90° Elbows
Part No. FPT x FPT
142552
142556
142558
142560
1/4"
3/8"
1/2"
3/4"
347092
347093
• Clear plastic cover
• Integrated garden hose connector
Part No.
Inlet
Outlet
347091
347093
347090
347092
3/8" MPT
3/8" MPT
1/2" MPT
1/2" MPT
3/4" GH
3/4" GH
3/4" GH
3/4" GH
• 8 GPM, 150 PSI
• Strongest see-through filter
on the market
Bypass
1/4"
1/4"
LANDA 55
COUPLERS, FITTINGS & FILTERS
Green-Cap Inline Filter
Inline Can-Type Filters & Parts
The Original Green-Cap!
• 6 GPM
• 40 mesh stainless screen
• Diecast metal housing/
plastic cap
Part No.
Description
2-1908
1-10016776
1-10016651
Green Cap Filter
Replacement Screen
Replacement Cap
•
•
•
•
Part No.
All Metal Line Filter
• Die-cast aluminum
body and cover
• 38 mesh screen
• 6.6 GPM
Part No.
Description
342030
109343
All Metal Line Filter (Black Anodized Finish)
Replacement Filter
• 170 PSI
• 195°F
• 1/2" Female x Male
Line Filters
• 1/2" Female x Male
• 50 mesh screen
• 8 GPM
Part No.
Description
342026
2-1923
12-28030656
Filter
With Auxiliary (bypass) Port
Replacement Screen
• 145 PSI
• 140°F
• Unbreakable reinforced
nylon cap
Clear Bowl Filters
•
•
•
•
•
•
Low profile style
MPT inlet & outlet
White nylon body
Clear bowl
Stainless steel screen
L 3", W 1-3/4", H 2-3/8"
56 LANDA
• 40 or 80 mesh filtration
• Heavy-duty molded plastic
with stainless steel screen
• Hanger tab standard on 3/8",
1/2" and 3/4"
• Choose black or clear filter cans
1/2" FPT inlet
1/2" MPT outlet
Two 1/4" side ports
145 PSI
Part No.
Description
342012
342013
342014
342015
342016
342017
078214
078215
1/4", 40 Mesh Screen
1/4", 80 Mesh Screen
3/8", 40 Mesh Screen
3/8", 80 Mesh Screen
1/2", 40 Mesh Screen
1/2", 80 Mesh Screen
80 Mesh Replacement Screen
40 Mesh Replacement Screen
Description
40 Mesh Filters
342105
342110
342115
342120
342150
342155
342106
342111
342116
342123
342151
342156
Black, 3/8"
Black, 1/2"
Black, 3/4"
Black, 1"
Black, 1-1/4"
Black, 1-1/2"
Clear, 3/8"
Clear, 1/2"
Clear, 3/4"
Clear, 1"
Clear, 1-1/4"
Clear, 1-1/2"
80 Mesh Filters
342112
342117
342122
342158
342147
342113
342118
342125
342159
342149
Black, 1/2"
Black, 3/4"
Black, 1"
Black, 1-1/4"
Black, 1-1/2"
Clear, 1/2"
Clear, 3/4"
Clear, 1"
Clear, 1-1/4"
Clear, 1-1/2"
Inline Can-Type Filter Parts - 3/8", 1/2", 3/4"
078202
Gasket
078204
Viton Gasket
078207
Bowl - Standard Black
078208
Bowl - Clear
078216
40 Mesh Screen
078220
80 Mesh Screen
078223
3/8" Top with Tab
078224
1/2" Top with Tab
078225
3/4" Top with Tab
Inline Can-Type Filter Parts - 1", 1-1/4", 1-1/2"
078203
Gasket
078205
Viton Gasket
078217
40 Mesh Screen 1"
078233
40 Mesh Screen 1-1/4"
078234
40 Mesh Screen 1-1/2"
078221
80 Mesh Screen 1"
078237
80 Mesh Screen 1-1/4"
078238
80 Mesh Screen 1-1/2"
078226
1" Filter Top
078227
1-1/4" Filter Top
078228
1-1/2" Filter Top
078230
Bowl Black - 1", 1-1/4", 1-1/2"
078231
Bowl Clear - 1", 1-1/4", 1-1/2"
Your One Stop Shop for Parts
Y-Trap Strainer
High Pressure Nozzle Filters
• Brass bodies & cap
• FPT inlet & outlet
• Stainless steel 50 mesh
cylinder screen
Part No.
Description
342004
342006
342007
342008
342009
1/4"
3/8"
1/2"
3/4"
1"
COUPLERS, FITTINGS & FILTERS
• 170 PSI
• 194°F
2-990712
2-99071
342042
347098
• 1/4" MPT outlet
• 300°F
NOTE: Replacement Screen/Gasket Kits Available
Check / Foot Valve
Includes backflow check and perforated screen, prevents damage to pump
or control valves.
•
•
•
•
Removable stainless steel screen
Spring-loaded check valve
Cast brass bodies
FPT outlet
Part No.
Description
310882
310883
310884
310886
310888
1/2" Foot Valve/ Check & Screen
3/4" Brass Spring Check Valve
1" Brass Spring Check Valve
1-1/2" Brass Spring Check Valve
2" Brass Spring Check Valve
ST35 / 35R Suction Foot Valve
• 100 mesh screen
• 5000 PSI
Part No.
Material
Inlet
Outlet
2-99071
342042
2-990712
347098
Brass
Brass
416 SS
Brass
1/4" FPT
1/4" QC
1/4" QC
1/4" MPT
1/4" MPT
1/4" MPT
1/4" MPT
1/4" MPT
High Volume Filter & Parts
Molded Plastic Housing
•
•
•
•
•
•
Part No.
Description
342375
Housing Only
Mounting Bracket / Hardware
• Stainless steel screen
• Combination 1/2"/ 3/4" hose barb
• Weighted to hold at bottom
of tank or source
Part No.
Description
342021
342020
With Check Valve
Without Check Valve
3/4" FPT inlet & outlet
125 PSI
12 GPM max flow at 50 Micron
10 GPM max flow at 5 or 20 Micron
Clear-View sump
14-1/2" tall x 5-1/2" port to port
• Allows secure, solid wall mounting
• Bright zinc-plated
• (4) screws included
Part No.
Description
565375X
Mounting Bracket/Hardware
Ultra Fine Filter Elements
• Pleated polyester/polypropylene core
• Recommended for large flow, low pressure applications
(up to 60 PSI)
Tank Screen / Strainer
• Stainless steel screen – 40 or 50 mesh
• PVC base – attaches to nipple or tubing
• Use for tank drain or chemical line
Part No.
Mesh
FPT
342304
342306
2-1906
342308
342311
342312
342316
342320
50
50
40
50
40
50
40
40
1/4"
3/8"
1/2"
1/2"
3/4"
3/4"
1"
1-1/2"
Part No.
Description
342380
342382
342384
5 Micron, 10 GPM
20 Micron, 10 GPM
50 Micron, 12 GPM
Synthetic String Wound Elements
• Recommended for maximum filtration with reduced flow
requirements (up to 130 PSI)
Part No.
Description
342387
342389
342391
5 Micron, 4 GPM
20 Micron, 5 GPM
50 Micron, 6 GPM
LANDA 57
COUPLERS, FITTINGS & FILTERS
Landa Fuel Filter / Water Separator
•
•
•
•
•
Removes water from fuel
Replace elements w/o tools
15 micron element
1/4" FPT inlet and outlet
Filters gasoline and diesel fuel
2-9905
Part No.
Description
2-9905
2-99051
2-99052
2-99053
2-99054
2-99055
Filter, Fuel/Water Separator
Replacement Element, Fuel/Water Separator
Replacement Element, Fuel/Water Sep - Heavy-duty
Kit, O-Rings & Drain Plug
Kit, O-Rings, Drain Plug, Cup
Plug, Vent, Fuel/Water Separator - Plastic
Clear Bowl Fuel Filter
Fuel Filters
Inline – disposable
• Aluminum Housing
• Clear Acrylic Bowl
341002
• Designed for gasoline filtering
Part No.
Description
2-99031
341002
341003
1/4" In/Out, Plastic
1/4" In/Out, Metal
3/8" In/Out, Plastic
Part No.
Description
341013
Complete Unit
• 120 Mesh SS Screen
• 1/4" x 1/4"
2-99031
General Fuel Filters
•
•
•
•
Can type
10 GPH
10 micron filtration
1/4" FPT inlet/outlet
• Inexpensive
replacement
• Wool felt element
• UL & CSA listed
Inline Fuel Filter
• 1/4" hose barb ends
• Multi brand application
Part No.
Description
2-9903
Disposable, mini
Part No.
Description
341015
341017
Filter Unit
Element
Racor Filter Funnel
• 3.9 GPM
• Telfon Coated, Stainless Steel Filter
• Separates free water and contaminates
from gasoline/diesel/kerosene
58 LANDA
Part No.
Description
341044
Racor Filter Funnel
NOZZLES
Your One Stop Shop for Parts
Nozzle Size Selection Chart
Determine the nozzle size by the pressure washer’s gallons per minute (GPM) and a specific pounds per square inch (PSI). If the nozzle size is too small,
your equipment can be damaged. If the nozzle size is to large, cleaning ability is compromised. Nozzle fan degree does not effect nozzle size selection.
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
10
11
12
12.5
13
15
20
25
30
40
50
60
Pounds Per Square Inch (PSI)
Hole
Size
.034"/0.86mm
.042"/1.07mm
.043"/1.09mm
.048"/1.22mm
.052"/1.32mm
.055"/1.40mm
.057"/1.45mm
.060"/1.52mm
.062"/1.57mm
.064"/1.63mm
.067"/1.70mm
.070"/1.78mm
.072"/1.83mm
.074"/1.88mm
.076"/1.93mm
.078"/1.98mm
.080"/2.03mm
.083"/2.11mm
.087"/2.21mm
.089"/2.26mm
.091"/2.31mm
.096"/2.44mm
.109"/2.77mm
.125"/3.18mm
.141"/3.58mm
.156"/3.96mm
.172"/4.37mm
.188"/4.78mm
Gallons Per Minute - GPM
Standard
Nozzle
Size
500
0.71
0.88
1.06
1.24
1.41
1.59
1.77
1.94
2.12
2.30
2.47
2.65
2.83
3.01
3.18
3.36
3.54
3.89
4.24
4.42
4.60
5.30
7.07
8.84
10.61
14.14
17.68
21.21
750
0.87
1.08
1.30
1.52
1.73
1.95
2.17
2.38
2.60
2.81
3.03
3.25
3.46
3.68
3.90
4.11
4.33
4.76
5.20
5.41
5.63
6.50
8.66
10.83
12.99
17.32
21.65
25.98
1000
1.00
1.25
1.50
1.75
2.00
2.25
2.50
2.75
3.00
3.25
3.50
3.75
4.00
4.25
4.50
4.75
5.00
5.50
6.00
6.25
6.50
7.50
10.00
12.50
15.00
20.00
25.00
30.00
1250
1.12
1.40
1.68
1.96
2.24
2.52
2.80
3.07
3.35
3.63
3.91
4.19
4.47
4.75
5.03
5.31
5.59
6.15
6.71
6.99
7.27
8.39
11.18
13.98
16.77
22.36
27.95
33.54
1500
1.22
1.53
1.84
2.14
2.45
2.76
3.06
3.37
3.67
3.98
4.29
4.59
4.90
5.21
5.51
5.82
6.12
6.74
7.35
7.65
7.96
9.19
12.25
15.31
18.37
24.49
30.62
36.74
1750
1.32
1.65
1.98
2.32
2.65
2.98
3.31
3.64
3.97
4.30
4.63
4.96
5.29
5.62
5.95
6.28
6.61
7.28
7.94
8.27
8.60
9.92
13.23
16.54
19.84
26.46
33.07
39.69
2000
1.41
1.77
2.12
2.47
2.83
3.18
3.54
3.89
4.24
4.60
4.95
5.30
5.66
6.01
6.36
6.72
7.07
7.78
8.49
8.84
9.19
10.61
14.14
17.68
21.21
28.28
35.36
42.43
2250
1.50
1.88
2.25
2.63
3.00
3.38
3.75
4.13
4.50
4.88
5.25
5.63
6.00
6.38
6.75
7.13
7.50
8.25
9.00
9.38
9.75
11.25
15.00
18.75
22.50
30.00
37.50
45.00
2500
1.58
1.98
2.37
2.77
3.16
3.56
3.95
4.35
4.74
5.14
5.53
5.93
6.32
6.72
7.12
7.51
7.91
8.70
9.49
9.88
10.28
11.86
15.81
19.76
23.72
31.62
39.53
47.43
2750
1.66
2.07
2.49
2.90
3.32
3.73
4.15
4.56
4.97
5.39
5.80
6.22
6.63
7.05
7.46
7.88
8.29
9.12
9.95
10.36
10.78
12.44
16.58
20.73
24.87
33.17
41.46
49.75
3000
1.73
2.17
2.60
3.03
3.46
3.90
4.33
4.76
5.20
5.63
6.06
6.50
6.93
7.36
7.79
8.23
8.66
9.53
10.39
10.83
11.26
12.99
17.32
21.65
25.98
34.64
43.30
51.96
3250
1.80
2.25
2.70
3.15
3.61
4.06
4.51
4.96
5.41
5.86
6.31
6.76
7.21
7.66
8.11
8.56
9.01
9.92
10.82
11.27
11.72
13.52
18.03
22.53
27.04
36.06
45.07
54.08
3500
1.87
2.34
2.81
3.27
3.74
4.21
4.68
5.14
5.61
6.08
6.55
7.02
7.48
7.95
8.42
8.89
9.35
10.29
11.22
11.69
12.16
14.03
18.71
23.39
28.06
37.42
46.77
56.12
3750
1.94
2.42
2.90
3.39
3.87
4.36
4.84
5.33
5.81
6.29
6.78
7.26
7.75
8.23
8.71
9.20
9.68
10.65
11.62
12.10
12.59
14.52
19.36
24.21
29.05
38.73
48.41
58.09
4000
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00
11.00
12.00
12.50
13.00
15.00
20.00
25.00
30.00
40.00
50.00
60.00
4500
2.12
2.65
3.18
3.71
4.24
4.77
5.30
5.83
6.36
6.89
7.42
7.95
8.49
9.02
9.55
10.08
10.61
11.67
12.73
13.26
13.79
15.91
21.21
26.52
31.82
42.43
53.03
63.64
5000
2.24
2.80
3.35
3.91
4.47
5.03
5.59
6.15
6.71
7.27
7.83
8.39
8.94
9.50
10.06
10.62
11.18
12.30
13.42
13.98
14.53
16.77
22.36
27.95
33.54
44.72
55.90
67.08
Quick Connect Nozzles
One-Piece Hardened Steal Quick Connect Nozzle, fits most 1/4" quick couplers. Rated for 4000 PSI.
• Color coded for easy identicication
• “Through hardened” stainless
• Made in America
Nozzle
Size
0°
15°
25°
40°
3.0
3.5
4.0
4.5
5.5
87235760
87235770
258160
87235780
87235790
258125
258145
258180
258180
258220
258130
258150
258165
258185
258225
258135
258155
258170
258190
258230
Part No.
87236360
Orifice
Degree
40
65°
Q-Style Chemical Nozzle
LANDA 59
NOZZLES
4 & 5 Pack Color Coded QC Nozzle Sets
Nozzle Sets, contain a complete set of 4 or 5 quick coupler nozzles 0°, 15°, 25°, and 40°.
The 5 pack includes one 40 x 65° soap nozzle.
4-Pack
4-Pack
4-Pack
5-Pack
Orifice
3.0
3.5
4.0
4.5
5-Pack
Part No.
4-0003
4-0035
4-0004
4-0045
Orifice
Part No.
Orifice
Part No.
Orifice
Part No.
5.0
5.5
6.0
6.5
4-0005
4-0055
4-0006
259706
3.5
4.0
4.5
5.0
259710
259711
259712
259713
5.5
6.0
6.5
259714
259715
259716
General Pump Nozzles
“QC”, Color Coded, Hardened Stainless Nozzle, fits most 1/4" quick couplers. Rated for 4000 PSI.
Orifice
Q-Style Nozzle
3.0
3.5
4.0
4.5
5.0
5.5
6.0
0°
15°
25°
40°
259610
259615
259620
259625
259630
259635
259640
259611
259616
259621
259626
259631
259636
259641
259612
259617
259622
259627
259632
259637
259642
259613
259618
259623
259628
259633
259638
259643
Orifice
6.5
7.0
7.5
8.0
8.5
9.0
10.0
0°
15°
25°
40°
259645
259650
259655
259660
259665
259670
259675
259646
259651
259656
259661
259666
259671
259676
259647
259652
259657
259662
259667
259672
259677
259648
259653
259658
259663
259668
259673
259678
Fan Sizes Available
Landa Part No., use the following part numbering key.
example: 4-12804025
4-128
prefix
040
orifice size (4.0)
25
fan size (25°)
0°, 15°, 25° and 40°
see chart on page 59
for orifice size
1/4" male pipe thread nozzles, rated up to 5000 PSI. Hardened stainless steel nozzle insert insures consistent,
accurate orifice size.
Orifice
M-Style
1/4" Male Threads
3.0
3.5
4.0
4.5
5.0
5.5
6.0
0°
15°
25°
40°
259100
259104
259108
259112
259116
259120
259125
259101
259105
259109
259113
259117
259121
259126
259102
259106
259110
259114
259118
259122
259127
259103
259107
259111
259115
259119
259123
259128
Orifice
6.5
7.0
7.5
8.0
8.5
9.0
10.0
0°
15°
25°
40°
259130
259135
259140
259145
259150
259155
259160
259131
259136
259141
259146
259151
259156
259161
259132
259137
259142
259147
259152
259157
259162
259133
259138
259143
259148
259153
259158
259163
Fan Sizes Available
Landa Part No., use the following part numbering key.
example: 4-01407500
4-014
prefix
075
orifice size (7.5)
00
fan size (0°)
0°, 15°, 25° and 40°
see chart on page 59
for orifice size
Q-Style Chemical Nozzles, are brass with a large #40 orifice and 65° spray angle. Ideal for low pressure
chemical applications.
Q-Style Chemical Nozzle
Soap Nozzles
Orifice
Part No.
Spray Angle
40
4-16540
65°
“Black” Soap Nozzles, are brass with a large #40 orifice. Ideal for low
pressure chemical applications.
25°
Part No.
255905B
60 LANDA
65°
Orifice
40
Part No.
255920B
Orifice
40
NOZZLES
Your One Stop Shop for Parts
Spraying Systems Nozzles
1/4" male pipe thread nozzles, rated up to 4000 PSI. Hardened stainless steel nozzle insures consistent,
accurate orifice size.
Orifice
1/4" Male Threads
• Orifice recessed
for protection
• 4000 PSI rated
working pressure
• ± 2% flow tolerance
@ 70°F
• Hard edge pattern, light
center requires overlap
to cover center
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
0°
15°
25°
40°
251100
251113
251120
251140
251160
251175
251195
251215
251235
251255
251275
251300
251320
251340
251105
251116
251125
251145
251161
251180
251200
251220
251240
251260
251280
251305
251325
251345
251110
251119
251130
251150
251165
251185
251205
251225
251245
251265
251285
251310
251330
251350
251115
–
251135
251155
251170
251190
251210
251230
251250
251270
251290
251315
251335
251355
Orifice
9.0
10.0
11.0
12.0
12.5
13.0
15.0
20.0
25.0
30.0
40.0
50.0
60.0
0°
15°
25°
40°
251360
251380
251400
251420
251440
251460
251480
251500
251520
251540
251560
251580
251600
251365
251385
251405
251425
251445
251465
251485
251505
251525
251545
251565
251585
251605
251370
251390
251410
251430
251450
251470
251490
251510
251530
251550
251570
251590
251610
251375
251395
251415
251435
251455
251475
251495
251515
251535
251555
251575
251595
251615
Fan Sizes Available
Landa Part No., use the following part numbering key.
example: 4-01403025S 4-014
prefix
030
orifice size (3.0)
25
fan size (25°)
S
suffix
0°, 15°, 25° and 40°
see chart on page 59
for orifice size
1/8" male pipe thread nozzles, rated up to 4000 PSI. Hardened stainless steel nozzle insures consistent,
accurate orifice size.
Orifice
1/8" Male Threads
• Orifice recessed
for protection
• 4000 PSI rated
working pressure
• ± 2% flow tolerance
@ 70°F
• Hard edge pattern, light
center requires overlap
to cover center
2.0
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
0°
15°
25°
40°
250100
250120
–
250140
250160
250180
250200
250220
250240
250260
250105
250125
250137
250145
250165
250185
250205
250225
250245
250265
250110
250130
250138
250150
250170
250190
250210
250230
250250
250270
250115
250135
–
250155
250175
250195
250215
250235
250255
250275
Orifice
7.5
8.0
8.5
9.0
9.5
10.0
11.0
12.0
15.0
20.0
0°
15°
25°
40°
250280
250300
250320
250340
–
250380
250400
250420
250440
250500
250285
250305
250325
250345
250365
250385
250405
–
250445
–
250290
250310
250330
250350
250370
250390
250410
–
250450
–
250295
250315
250335
250355
250375
250395
–
250435
–
–
Fan Sizes Available
Landa Part No., use the following part numbering key.
example: 4-01803515S 4-018
prefix
035
orifice size (3.5)
15
fan size (15°)
S
suffix
0°, 15°, 25° and 40°
see chart on page 59
for orifice size
“QC” or Quick Connect Hardened Stainless Nozzle, fits most 1/4" quick couplers. Rated for 4000 PSI.
QC “Wash Jet” Nozzle
Color Coded Nozzle Protector
• 4000 PSI
• Flow rated tolerance
of ±2%
• Hardened SS
• 300°F
• Fits Hansen and
Parker quick-couplers
Orifice
0°
15°
25°
40°
4.0
4.5
5.0
5.5
6.0
6.5
Red
255160
255175
255195
255215
255235
255255
Yellow
255161
255180
255200
255220
255240
255260
Green
255165
255185
255205
255225
255245
255265
White
255170
255190
255210
255230
255250
255270
Orifice
0°
15°
25°
40°
7.0
7.5
8.0
9.0
10.0
12.0
Red
255275
255300
255320
–
255380
255420
Yellow
255280
255305
255325
255365
255385
255425
Green
255285
255310
255330
255370
255390
255430
White
255290
255315
255335
255375
255395
255435
To order correct nozzle size, use the following part numbering key.
Fan Sizes Available
example: 4-12802040S 4-128
prefix
0°, 15°, 25° and 40°
see chart on page 59
for orifice size
020
orifice size (2.0)
40
fan size (40°)
S
suffix
LANDA 61
NOZZLES
Brass Nozzles for Low Pressure Applications
1/4" male pipe thread nozzles, Brass inexpensive alternative for applications up to 700 PSI.
Nozzle
Size
0°
15°
25°
40°
50°
65°
15
20
30
40
50
60
70
254260B
254270B
254290B
254300B
254310B
254320B
254330B
254261B
254271B
254291B
254301B
254311B
254321B
254331B
254262B
254272B
254292B
254302B
254312B
254322B
254332B
254264B
254274B
254294B
254304B
254314B
254324B
254334B
254265B
254275B
254295B
254305B
254315B
254325B
254335B
254266B
254276B
254296B
254306B
254316B
254326B
254336B
1/4" Male Threads
• Feather edge
for wide coverage
• Allows overlap
for even application
• Excellent for low
pressure chemical
& acid applications
• 1/4" MPT connects
Broad Spray Stainless Steel Nozzles
1/4" male pipe thread 303 stainless steel nozzles, low to medium volume up to 1500 PSI medium pressure/
special application.
Nozzle
Size
Equiv
Orifice Dia
50°
65°
80°
95°
110°
1.0
1.5
2.0
3.0
4.0
5.0
6.0
7.0
8.0
.026
.031
.036
.043
.047
.053
.058
.063
.067
254105
254115
254125
254135
254145
254155
254175
254195
254215
254106
254116
254126
254136
254146
254156
254176
254196
254216
254107
254117
254127
254137
254147
254157
254177
254197
254217
254108
254118
254128
254138
254148
254158
254178
–
254218
254109
254119
254129
254139
254149
254159
254179
254199
254219
1/4" Male Threads
Tip-Jet Nozzle System - Tips & Components
“Tip-Jet” Nozzle Systems are versatile nozzling systems for everyday or specialized applications. Also on page 34.
Flat spray, full cone, hollow cone & solid stream patterns, metering orifices and atomizing tips are all available
in the Tip-Jet system. Capacities range from .55 to 20 GPM.
Orifice
Size
0°
15°
25°
40°
Orifice
Size
0°
15°
25°
40°
3.0
4.0
4.5
5.0
5.5
6.0
253316
253330
253338
253346
253355
253365
253317N
253331
253339
253348
253357
253367
253318
253332
253340
253349
253358
253368
–
253333
253341
253350
253359
253369
6.5
7.0
7.5
8.0
9.0
10.0
253375
253383
253392
253400
253415
253456
–
253385
253393
253401
253416
253457
253377
253386
253394
253402
253417
253458
253378
253387
253395
253403
253418
253459
Tip-Jet Tips
• Neat & simple
tip change
• Hardened stainless
steel tips with vanes
• Strainers available
• Body components
available in brass,
zinc-plated steel
or stainless steel
• Rated to 4000 PSI
Tip-Jet Retainer Caps, fits all Tip-Jet nozzle bodies,
holds spray tips and metering orifices firmly in place.
Tip-Jet Nozzle Bodies, MPT inlet connections
in 1/4", 3/8" and 1/2" sizes. All outlet connections
are 11/16" - 16 male thread to fit Tip-Jet tip retainers
and adapters.
Part No.
Tip-Jet
Nozzle Bodies
252511
252640B
252642
252861P
Material, MPT
Part No.
Tip-Jet
Retainer Caps
Nylon, 1/4"
Brass, 1/4"
SS, 1/4"
Polypropylene, 1/4"
Part No.
62 LANDA
252878B
252880B
252881
Material, MPT
Brass, 1/8"
Brass, 1/4"
SS, 1/4"
Brass, Hex
Plated Steel, Hex
SS, Hex
Tip-Jet Strainers, fit into nozzle body cavity to stop
nozzle clogging.
Tip-Jet Adapter Caps, similar to tip retainers, but
have FPT connections for in-line applications.
Tip-Jet
Adapter Caps
252858B
252875
252565
Material, MPT
Tip-Jet Strainers
Part No.
Material
252627
252629
252631
50 Mesh, Brass w/ SS Mesh
100 Mesh, Brass w/ SS Mesh
200 Mesh, Brass w/ SS Mesh
NOZZLES
Your One Stop Shop for Parts
Legacy REVOLUTION Turbo Nozzle
THE REVOLUTION IS HERE!
L
egacy Premier Parts & Accessories is proud to introduce the Revolution
rotary nozzle. Our much anticipated rotary nozzle is rated for up to
New!
4350 PSI at 185°F. Turning at an astounding 4000 RPM, the
Revolution delivers faster and deeper cleaning action for the same price
of 3000 PSI rotary nozzles. This means you only need one turbo nozzle
to meet most of your customers’ cleaning needs.
With the Legacy Revolution rotary nozzle you get:
■
Greater Cleaning Power: The Revolution is engineered to increase
the impact pressure by more than 10 times that of conventional nozzles!
■
Longer Operating Life: The Revolution’s operating life is extended significantly
by its wear-resistant ceramic nozzle and bearing ring.
■
More Durable and Versatile: The Revolution features an extra-resilient housing
protector and is capable of handling a stream of up to 4350 PSI at 185°F.
Nozzle
Repair Kit
Nozzle
Orifice
PSI
Repair Kit
Orifice
374231
374232
374233
374234
374235
374236
374237
374238
3.5
4.0
4.5
5.0
5.5
6.5
7.0
10.0
4350
4350
4350
4350
4350
4350
4350
4350
079920
079921
079922
079923
079924
079925
079926
079927
3.5
4.0
4.5
5.0
5.5
6.5
7.0
10.0
Rotomax Rotating Nozzle 3500
& 5800 PSI
•
•
•
•
•
Part No.
Description
4-2014
4-2013
4-2012
374216
374217
1-190040
Rotomax I
Rotomax II
Rotomax III
Rotomax 401
Rotomax 403
Repair Kit
Std Nozzle
Equiv
4.5
5.5
6.5
4.5
6.5
Legacy high-quality parts and
accessories have been field
tested to exceed the rugged
demands of the harshest
high-pressure cleaning
applications.
Viper Rotating Nozzle
Up to 5800 PSI
1/4" FPT inlet
176°F
Weight 1.1 lbs
Replaceable SS orifices
•
•
•
•
5000 PSI
190°F
1/4" FPT inlet
Weight 1.1 lbs
PSI
Part No.
Description
Std Nozzle
Equiv
3500
3500
3500
5800
5800
4-2018
4-2017
080004
080006
Viper
Viper
Repair Kit
Repair Kit
4.5
5.5
4.5
5.5
PSI
5000
5000
5000
5000
LANDA 63
NOZZLES
Dirt Killer Rotating Nozzle
4700 maximum PSI, popular model that provides great impact and cleaning power.
• 180°F maximum temperature
4-20091
• 1/4" inlet
Part No.
Orifice
PSI
Part No.
Orifice
PSI
4-20091
4-200910
045
Repair Kit
3200
4-20092
4-200920
055
Repair Kit
4700
Suttner Turbo Nozzles
• Forged brass
• Precision ceramic orifice
ST-357 3600 PSI
ST-457 5800 PSI
• Rubber cover/ protector
• 190°F
Part No.
Size
PSI
Part No.
Size
PSI
Part No.
Size
PSI
374103
374104
374106
3.0
3.5
4.0
3600
3600
3600
374105
374107
4.5
5.0
3600
3600
374109
374108
5.5
6.0
3600
3600
ST-357
Repair Kit
Size
PSI
ST-357
Repair Kit
Size
PSI
ST-357
Repair Kit
Size
PSI
085458
085457
085452
3.0
3.5
4.0
3600
3600
3600
085449
085453
4.5
5.0
3600
3600
085456
085454
5.5
6.0
3600
3600
Part No.
Size
PSI
Part No.
Size
PSI
Part No.
Size
PSI
374300
374301
374302
374303
3.0
3.5
4.0
4.5
5800
5800
5800
5800
374304
374305
374306
5.0
5.5
6.0
5800
5800
5800
374308
374309
374310
7.0
8.0
10.0
5800
5800
5800
ST-457
Repair Kit
Size
PSI
ST-457
Repair Kit
Size
PSI
085465A
085465
085466
085467
3.0
3.5
4.0
4.5
5800
5800
5800
5800
085468
085469
085470
5.0
5.5
6.0
5800
5800
5800
ST-457
Repair Kit
085472
085473
085474
Size
PSI
7.0
8.0
10.0
5800
5800
5800
Rotojet 2000
Economy Turbo Nozzle.
• Great economy
washer
• 2000 PSI
• 1/4" FPT inlet
• 140°F
• 5.4 oz weight
Part No.
Orifice
Color
PSI
374175
374176
374177
3.0
3.5
4.0
Yellow
Black
Blue
2000
2000
2000
Turbo Nozzle
Provides great impact and cleaning power
Part No.
Orifice
PSI
Part No.
Orifice
PSI
374369
374361
374362
374363
374364
3.0
3.5
4.0
4.5
5.0
3650
3650
3650
3650
3650
374365
374366
374360
374367
374368
5.5
6.0
6.5
7.0
8.0
3650
3650
3650
3650
3650
374362
374352
64 LANDA
Part No.
Orifice
PSI
Part No.
Orifice
PSI
374350
374351
374352
374353
374354
3.0
3.5
4.0
4.5
5.0
5100
5100
5100
5100
5100
374355
374356
374357
374358
374359
5.5
6.0
6.5
7.0
8.0
5100
5100
5100
5100
5100
NOZZLES
Your One Stop Shop for Parts
Rotojet 3700 / Rotojet 5800
0° Impact, 25° pattern, no gears – no teeth – no bearings. Exclusive design of the Rotojet 3700 / Rotojet 5800 eliminates start up impact and damage to internal nozzle.
• High strength forged brass
• Precision ceramic orifice and matching race
Rotojet 3700
Must start
with nozzle
pointed down
Rotojet 5800
• Durable rubber/ plastic cover
• 190°F (except on 3700’s)
• 1/4" FNPT
3000 PSI
Part No.
Size
PSI
3000 PSI
Part No.
374130
4-2020
4-2021
4-2022
3.0
3.5
4.0
4.5
3700
3700
3700
3700
Size
PSI
4-2023
4-2024
4-2025
5.0
5.5
6.0
3700
3700
3700
Repair Kit
Part No.
Size
PSI
109297
89-0204107330
89-0204107340
89-0204107350
3.0
3.5
4.0
4.5
3700
3700
3700
3700
5000 PSI
Part No.
Size
PSI
5000 PSI
Part No.
Size
PSI
374142
374143
4-2030
4-2031
4-2032
4-2033
4-2034
3.0
3.5
4.0
4.5
5.0
5.5
6.0
5800
5800
5800
5800
5800
5800
5800
374151
4-2035
4-2036
374158
374160
374162
4-2037
6.5
7.0
8.0
9.0
10.0
11.0
12.0
5800
5800
5800
5800
5800
5800
5800
Repair Kit
Part No.
Size
PSI
Repair Kit
Part No.
Size
PSI
109428
109429
89-0204106910
89-0204106915
89-0204106920
89-0204106925
89-0204106930
3.0
3.5
4.0
4.5
5.0
5.5
6.0
5800
5800
5800
5800
5800
5800
5800
109435
89-0204106940
89-0204106950
109438
109439
109440
89-0204106990
6.5
7.0
8.0
9.0
10.0
11.0
12.0
5800
5800
5800
5800
5800
5800
5800
Repair Kit
Part No.
Size
PSI
89-0204107360
89-0204107370
89-0204107380
5.0
5.5
6.0
3700
3700
3700
MV Hi-lo Turbo Nozzle
Combines the power of a O° stream and a 20° wide angle spray pattern to improve cleaning. Hi-Lo pressure feature eliminates changing to a
low pressure nozzle for soap and chemical application.
374296
Part No.
Orifice
PSI
Part No.
Orifice
PSI
374293
374294
025
030
2500
2500
374295
374296
035
040
2500
2500
MV Triple Function Nozzle
Provides three cleaning options, Low pressure for soap or chemical application, a 15° angle for hi pressure cleaning and a rotating nozzle for
maximum cleaning efficiency.
Part No.
Orifice
PSI
Part No.
Orifice
PSI
374291
035
3000
374292
040
3000
374292
Rotojet Soft - Hard Rotating Nozzle
Offers the cleaning efficiency of a hi-pressure rotating nozzle with the feature of changing from a hard spray for concrete to a soft spray for
wood by simply pushing or pulling the finger protected nozzle.
374247
Part No.
Orifice
PSI
Part No.
Orifice
PSI
374245
374246
030
035
3600
3600
374247
374248
040
045
3600
3600
LANDA 65
NOZZLES
Rotojet 5800 with Rotation Controller
Offers the ability to adjust from the standard number of rotations to a lesser amount for optimum impact and cleaning efficiency.
Part No.
Orifice
PSI
Part No.
Orifice
PSI
374241
374242
035
040
5800
5800
374243
374244
045
050
5800
5800
374242
Duo-Reg Nozzle
Duo-Reg Nozzles are designed for Industrial use and priced for ALL applications. Easy Push/Pull
low to high pressure change and easy turn to adjust from 0° to 80° fan pattern.
• Stainless steel replaceable orifices
• 3000 PSI capability
• 300°F
Part No.
374030
374035
374040
374045
Orifice
Angle
Color
Yellow
White
Blue
Brown
3.0
3.5
4.0
4.5
• 1/4" FPT connect
• Tough glass-filled nylon cover
• Compact size: 3-3/8" long, 1-3/16" diameter,
5.7 oz weight
Part No.
374050
374055
374060
374065
Orifice
Angle
Color
Green
Sky
Black
–
5.0
5.5
6.0
6.5
Part No.
374070
374075
374080
Orifice
Angle
Color
–
–
–
7.0
7.5
8.0
Multi-Fan Nozzle
Adjust from maximum Impact Zero Stream to 80° Wide Angle Spray with a Twist of the Nozzle Body.
• 1/4" FPT connect
• 2900 PSI
• Replaceable SS orifices
• SS deflector
• 210°F
Part No.
373352
373353
373354
373356
Orifice
Angle
Color
Yellow
White
Blue
Brown
3.0
3.5
4.0
4.5
Part No.
373357
373358
373359
373360
Orifice
Angle
Color
Green
Sky
Gray
–
5.0
5.5
6.0
6.5
Part No.
373361
373362
373363
Orifice
Angle
Color
–
–
–
7.0
7.5
8.0
HL250 High / Low Variable Angle Nozzles
Push/Pull for easy change between high and low pressure; simple twist to adjust 0° – 80° spray fan pattern.
• Stainless steel
replaceable orifice
• 4000 PSI
• 200°F
• Durable glass-filled
nylon cover
• 1/4" FPT inlet
• Weight .4 lbs
Part No.
Color
374086 Light Green
374087
Pink
374088
White
374090
Brown
Orifice
Angle
2.0
2.5
3.0
3.5
Part No.
Color
374091 Dark Yellow
374092
Blue
374093
Purple
374094
Dark Red
Orifice
Angle
4.0
4.5
5.0
5.5
Part No.
Color
374095 Dark Green
374096 Light Blue
374097
Orange
374098
Silver
Orifice
Angle
6.0
6.5
7.0
8.0
Interchangeable Orifices - fit nozzles on this page
Orifice sizes for Duo-Reg, Multi-Fan and VapJet nozzles correspond to standard “MEG” orifice diameters –
Multi-Reg sizes relate ONLY to metric orifice diameter.
Part No.
084021
084023
084025
084026
084027
66 LANDA
Orifice
Fits
Fits
Dia Duo-Reg Multi-Reg
.043
.048
.051
.053
.055
3.0
3.5
4.0
n/a
4.5
n/a
n/a
3.0
3.5
4.0
Part No.
084028
084029
084030
084031
Orifice
Fits
Fits
Dia Duo-Reg Multi-Reg
.057
.059
.061
.063
5.0
5.5
6.0
6.5
4.5
5.0
5.5
6.0
Part No.
084032
084033
084034
084035
Orifice
Fits
Fits
Dia Duo-Reg Multi-Reg
.065
.067
.069
.071
n/a
7.0
7.5
8.0
6.5
7.0
7.5
8.0
NOZZLES
Your One Stop Shop for Parts
Double Nozzle Head
• Durable machined
brass body
• Stainless steel ball
• Chemical-resistant
• Heavy nickel plate
• 3600 PSI
Adjustable Nozzle
• 300°F
• Up to 10 GPM flow for low
side pressure at 250 PSI
• 1/4" female inlet,
2 female outlets
• New ball guide & seat
Compact full feature unit weighs only 4.3 oz, same functions as ST-51N.
• 10 GPM
• 3600 PSI
• 300°F
Part No.
Description
Part No.
Description
373058A
Double Nozzle Head
373051P
Adjustable Nozzle
Stainless Steel Sewer Nozzles
Rollover Nozzle - Twist-Type
Part No.
Holds 2 MEG nozzles on opposite sides for positive change from chemical
application to high pressure rinse.
• Nickel-plated brass body
• 180°F
Part No.
Description
373054
075020X
Dual 1/4" FPT in/out
Repair Kit
• 1000 PSI
• 4100 PSI
• Corrosion Resistant
Stainless Steel
• One Forward Orifice
• Three Rear Orifices
Brass body
8 GPM
3600 PSI
300°F
Part No.
Description
373056
Rollover Nozzle Head
• Glass-filled
polyamide cover
• 1/4" FPT inlet & outlet
• Standard sewer nozzle
• Blast forward and back
• Clears clogs and
flushes out lines
• 4200 PSI
ST-51N Adjustable Nozzle
Nozzle Holder allows water to be diverted around the Fixed Orifice Nozzle,
dropping the pressure and allowing the Chemical Injector to operate.
• Attaches to 1/4" MPT lance
• Accepts 1/4" MEG nozzles
• 8.0 GPM
Part No.
373051
• 300°F
• 3600 PSI
• 5.9 oz weight
Description
ST-51N
High Pressure Nozzle Filters
Size
1/8" FPT
1/8" FPT
1/8" FPT
1/4" FPT
1/4" FPT
1/4" FPT
5.0
5.5
6.0
6.5
7.0
9.5
Part No.
Nozzle Size
373024
(back jet only)
4-01916
4-019101
4-01911
4-01913
4-01914
373028
373032
373038
373037
373039
373036
373035
1/8"
1/8"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
3/8"
Part No. Description
• Rotating sewer
nozzle
• Adds extra agitation
• 3000 PSI
• Back Jet Only
• More sewer cleaning
accessories, page 21
Rotating Nozzle
4-01917
4-01918
4-01919
2-990712
347098
5.0
5.5
4.5
5.5
6.0
7.5
8.0
12.0
4.0
5.5
8.5
12.0
14.0
Nozzle Size
1/8"
1/4"
1/4"
5.5
5.5
8.0
373040* Duct Cleaner 1/4"
5.5
* Duct Cleaner jet to sides instead of reverse
• 1/4" MPT outlet
• 300°F
2-99071
342042
373075
373076
373077
373078
373079
373080
Tube Cleaning Nozzles
ST-56 Rollover Nozzle Head
•
•
•
•
• Machined brass body
• Nylon adjustment knob
• 1/4 FPT inlet/outlet
• 100 mesh screen
• 5000 PSI
Part No.
Material
Inlet
Outlet
2-99071
342042
2-990712
347098
Brass
Brass
416 SS
Brass
1/4" FPT
1/4" QC
1/4" QC
1/4" MPT
1/4" MPT
1/4" MPT
1/4" MPT
1/4" MPT
LANDA 67
NOZZLES
Rosebud Nozzle Guard
Steam Nozzle
Steam Nozzle Blank
•
•
•
•
Flat Steam Nozzle
Part No.
Description
373710
4-2000
373705
Flat Steam Nozzle, 1.5mm
Steam Nozzle Blank – Drill to Size
Nozzle Blank – Drilled to 1.6mm
One-piece brass
1450 PSI
Steam Nozzle - 1/4" F
Steam Blank - 3/8" M
Part No.
Description
373002
373004
1/8" Nozzle
1/4" Nozzle
• 1/8" MEG
Part No.
Description
373012
Nozzle Guard
Compact Foamer
Nozzle Protector / Coupler
• Protect nozzles and
finished surfaces
• Deep nozzle recess
Molded Rubber Guard which fits tightly around the nozzle to protect the nozzle
and painted surfaces.
• Tough plastic protector
• 1/4" FPT coupler inlet
Lance Nozzle Couplers
Generates a high density clinging foam for extended dwell time to increase
chemical action
• Stainless steel,
aluminum and brass
• 5" long, 1" diameter
• 4 and 6.5 nozzle
included
Part No.
Description
344022V
344023V
1/8" F Inlet
1/4" F Inlet
• 1 to 5 GPM
• 2500 PSI
• 195°F
NOTES: Most cleaning chemicals perform best when applied at 120° - 150°F and can be applied as a
foam by adding a foaming agent. See your chemical supplier to obtain the correct product.
Changes MPT Lance to FPT for Mounting MPT Nozzles.
Foam Cannon
The Ideal Foam Generator Application Accessory meters the foaming chemical for
customized foam type and applies the foam to match the application.
Part No.
Description
Brass
2-1013
2-1095
2-1014
1/8" x 1/8"
1/4" x 1/8"
1/4" x 1/4"
• Stainless Steel 1.5mm orifice
(#5.5 nozzle equivalent)
• Brass meter valve
• High impact glass-filled body
• 4.8 GPM
• 3000 PSI
• 176°F
• SS Foam Turbulator
• 1/4" FPT lance connect
Steel
368903
368902
368904
1/8" X 1/8"
1/4" x 1/8"
1/4" x 1/4"
Slip-On Nozzle Protector
A durable, easy-to-use nozzle protector. Plastic rubber compound – FLEXIBLE
but TOUGH.
• 1-1/2" diameter
at flare-end
• Slip-fits standard lances
• 2-1/2" long
• Only 1.2 oz!
Part No.
Description
373006
Slip-on Nozzle Protector
68 LANDA
• Slip onto Lance
• Attach Nozzle Coupler
& Nozzle
• Slide Protector Forward
for COMPLETE NOZZLE
PROTECTION
Part No.
Description
344030
344032
Foam Cannon/ Injector
Foam Cannon/ Injector/Bottle
PUMPS & PUMP
NOZZLES
KITS
Your One Stop Shop for Parts
LANDA Pumps
The LX series pump is the patriarch of the line, delivering enough volume and pressure
for the beefiest of pressure Washer.
• Up to 10.6 GPM and 5000 PSI
• 10% lower RPM than comparable pumps
LX Series
• Extra-heavy duty crankshaft and bearings
• 10mm head bolts made of 12.9 class steel
Part No.
Model No.
Part No.
Model No.
GPM
PSI
5-1738
5-1742
5-1749
LX5050-Right
LX8030-Right
LX1025-Right
5-1739
5-1743
5-1748
LX5050-Left
LX8030-Left
LX1025-Left
5.0
8.0
10.6
5000
3000
2500
HP
RPM
Shaft
13.0
16.5
16.5
1660
1460
1725
25mm
25mm
25mm
LANDA’s unique design that delivers the same performance as other pumps but at 10%
lower RPM.
• Up to 6 GPM and 4000 PSI
• 10% lower RPM than comparable pumps
LT Series
Part No.
Model No.
5-1726
5-1724
5-1728
5-1730*
5-1732
LT4040-Right
LT4035-Right
LT5030-Right
LT5030/H-Right
LT6035-Right
Part No.
• Unique snug-fit design for heavy-duty valves
• Durable ceramic plunger with mirror finish
Model No.
5-1725
LT4035-Left
5-1733
LT6035-Left
GPM
PSI
4.0
4.2
5.0
5.0
6.0
4000
4000
3000
3000
3500
HP
RPM
Shaft
11.0
11.0
13.5
13.5
14.5
1030
1325
1060
1060
1540
25mm
25mm
25mm
25mm
25mm
*High heat valves and packing for SEA units.
The LM series is a heavy-duty pump designed for a broad range of applications
generally from 4 to 5 GPM and from 3000 to 3500 PSI.
• Up to 5 GPM and 3500 PSI
• 10% lower RPM than comparable pumps
LM Series
• Copper-plated plunger guide lined with low-friction,
teflon bronze and lead bushing
Part No.
Model No.
GPM
PSI
HP
RPM
Shaft
5-1710
5-1720
5-1722*
5-1715
LM4030-Right
LM4035-Right
LM4035/H-Right
LM5030-Right
4.0
4.2
4.2
5.0
3000
3500
3500
3000
8.2
7.5
7.5
13.5
1000 24mm
1300 24mm
1300 24mm
1550 24mm
*High heat valves and packing for SEA units.
The LS series is designed specifically as a direct drive pump for gas engines.
• Up to 5 GPM and 4000 PSI
• Durable ceramic plunger w/mirror finish
LS Series
New
Part No.
Model No.
GPM
PSI
5-1760
5-1761
5-1762
5-1763
LS3040G
LS3540G
LS4040G
LS5030G
3.0
3.5
4.0
5.0
4000
4000
4000
3000
LD Series
HP
RPM
Shaft
9.0
11.0
13.0
16.0
3400
3400
3400
3400
1" Hollow
1" Hollow
1" Hollow
1" Hollow
HP
RPM
Shaft
3450
1725
3450
5/8"
5/8"
5/8"
1650
1550
1650
25mm
25mm
25mm
3400
3400
3/4"
3/4"
LANDA’s LE, LD and LG pump series
Part No.
LE Series
• Set screw for engine shaft
Model No.
GPM
PSI
Landa LE Series - Hollow shaft pumps for direct drive electric units
5-1701
LE2020F
2.1
2000
5.0
5-1702
LE2020S
2.1
2000
5.0
5-1705
LE3525F
3.5
2500
5.0
Landa LD Series - Solid shaft pumps for belt drive units
5-1706
LD3030H
3.0
3000
9.0
5-1708
LD4020
4.0
2000
5.0
5-1709
LD3030
3.0
3000
9.0
Landa LG Series - Hollow shaft pumps for direct drive gas units
5-1750
LG2530G
2.5
3000
11.0
5-1752
LG3030G
3.0
3000
13.0
LG Series
LANDA 69
PUMPS & PUMP KITS
LANDA Pump Repair Kit Selection Chart
Use the selection chart below to find the correct repair kits for the specific LANDA Pump Model.
Pump Model
LM-4030
LM-4035
LM-4035H
LM-5030
LT-4035
LT-4040
LT-5030
LT-5030H
LT-6035
LS-3040G
LS-3540G
LS-4040G
Valves
Packings
Packing
w/Brass
Plunger
Oil Seals
Ceramic
Plunger Kit*
Pump Model
70-260007
70-260007
70-260007
70-260007
70-260007
70-260007
70-260007
70-260007
70-260007
70-260007
70-260007
70-260007
70-260821
70-261216
70-261212
70-260821
70-260020
70-260020
70-260110
70-262922
70-260020
70-260824
70-260824
70-260824
70-260810
70-261210
70-261213
70-260810
70-261211
70-261211
70-260811
70-262921
70-261211
70-260825
70-260825
70-260825
70-260023
70-260027
70-260023
70-260023
70-260023
70-260023
70-260023
70-260023
70-260023
70-260027
70-260027
70-260027
70-260822
70-261217
70-261217
70-260822
70-260024
70-260024
70-260112
70-260112
70-260024
70-260823
70-260823
70-260823
LS-5030G
LX-8030
LX-1025
LX-5050
LE-2020F
LE-2020S
LE-3525F
LD-3030H
LD-4020
LD-3030
LG-2530G
LG-3030G
Valves
Packings
Packing
w/Brass
Plunger
Oil Seals
Ceramic
Plunger Kit*
70-260007
70-260025
70-260025
70-260018
70-260028
70-260028
70-260028
70-260028
70-260028
70-260028
70-260028
70-260028
70-260824
70-260207
70-260207
70-260216
70-261408
70-261410
70-261408
70-261412
70-261410
70-261408
70-261408
70-261408
70-260825
70-260208
70-260208
70-260217
70-261409
70-261411
70-261409
70-261413
70-261411
70-261409
70-261409
70-261409
70-260027
70-260023
70-260023
70-260023
70-260826
70-260826
70-260826
70-260826
70-260826
70-260826
70-260826
70-260826
70-260823
70-260209
70-260209
70-261217
70-261404
70-261405
70-261404
70-261404
70-261405
70-261404
70-261404
70-261404
* Includes bolt, Washer, o-ring, teflon ring and ceramic plunger
LANDA Pump Repair Kits
LANDA Pump Tool Kit
Original Factory Direct Repair Kits. See above for kit selection chart. Individual
parts are also available. See exploded view of pump for individual part numbers.
Part No.
Kit Description
70-260007
70-260018
70-260020
70-260023
70-260024*
70-260025
70-260027
70-260028
70-260110
70-260112*
70-260207
70-260208
70-260209
70-260216
70-260217
70-260810
70-260811
70-260821
70-260822*
70-260823*
70-260824
70-260825
70-260826
70-261210
70-261211
70-261212
70-261213
70-261216
70-261217*
70-261404
70-261405
70-261408
70-261409
70-261410
70-261411
70-261412
70-261413
70-262922
70-262921
Valve Kit, LM, LT, LS Series
Valve Kit, LX5050
Plunger Seals, 20mm LT Series
Plunger Oil Seals, LM, LT, LS Series
Plunger, 20mm, LT4035
Valves, LX8030, LX1025
Plunger Oil Seals, LS
Valve Kit, LE, LD, LG Series
Plunger Seals, 22mm, LT5030
Plunger, 22mm, LT5030
Plunger Seals, 25mm, LX8030, LX1025
Packing Assy, 25mm, LX8030, LX1025
Plunger, 25mm, LX8030, LX1025
Plunger Seals, LX5050
Complete Seal Packing, LX5050
Complete Seal Packing, 20mm, LM4030, LM5030
Complete Seal Packing, 22mm, LT5030
Plunger Seals, 20mm, LM5030
Plunger, 20mm, LM5030
Plunger, 15mm, LS Series
Plunger Seals, 15mm, LS Series
Complete Seal Packing, 15mm, LS Series
Plunger Oil Seals, LE, LD,LG Series
Complete Seal Packing, 18mm
Complete Seal Packing, 20mm, LT Series
Plunger Seal, 18mm, Hot Kit, LM4035H
Packing Assy, 18mm, Hot Kit, LM4035H
Plunger Seals, 18mm, LM4035
Plunger, 18mm, LM4035, LX5050
Plgr, 15mm, LE2020F, LE3525F, LD3030H, LD3030, LG srs
Plunger, 18mm, LE2020S, LD4020
Plng. Seal, 15mm, LE2020F, LE3525F, LD3030, LG series
Complete Seal Pkng, LE2020F, LE3525F, LD3030. LG srs
Plunger Seal, 18mm, LE2020S, LD4020
Complete Seal Packing, 18mm, LE2020S, LD4020
Plunger Seal, 15mm LD3030H
Complete Seal Packing, 15mm, LD3030H
Plunger Seal, 22mm, Hot Kit, LT5030H
Packing Assy, 22mm, Hot Kit, LT5030H
* Includes bolt, Washer, o-ring, teflon ring and ceramic plunger
70 LANDA
A Must for every Service Department.
Save time using the right tool for the job. The LANDA Pump Tool Kit, which can
be purchase individually, includes the following:
Part No.
Kit Description
70-060202
70-120604
70-120605
70-060203
70-021506
70-021501
70-021505
70-010114
70-010117
70-021502
70-120608
70-010104
70-120609
70-010105
70-021504
70-070109
Oil Seal Bushing Inserter for LT Plunger Rod
Oil Seal Piston Inserter for LT Plunger Rod
Oil Seal Piston Inserter for LM Plunger Rod
Oil Seal Bushing Inserter for LM Plunger Rod
Allen Wrench, 8mm for LT Manifold bolts
Allen Wrench, 6mm for LM Manifold bolts
Allen Wrench, 5mm for LM-LT Crankcase cover bolts
Oil Seal Bushing Inserter for LT Crankshaft
Oil Seal Bushing Inserter for LM Crankshaft
Piston Seal Extractor
“V” Seal Piston Inserter for LM Manifold
“V” Seal Bushing Inserter for LM Manifold
“V” Seal Piston Inserter for LT Manifold
“V” Seal Bushing Inserter for LT Manifold
Hammer, Plastic Head
Plastic Tool Box
Part No.
Kit Description
70-241202 LANDA Pump Tool Kit (complete)
PUMPS & PUMP
NOZZLES
KITS
Your One Stop Shop for Parts
Interpump / General Pumps
Solid Shaft Pumps
Part No.
Interpump
Model No.
GP
Model No.
GPM
PSI
HP
RPM
Shaft
Dia
102033*
5-2300*
5-2302
102052L
102048
5-23023
102046L
102042
5-23040
5-23042
5-2304
5-23041
5-23013
102074
5-23026
5-2335
5-2332
102082
102090
102088
102105
5-2305
5-2307
5-2306
5-23005
102162
102167*
5-23007*
102174*
102176GA
102135
102140
102145
5-23004
102152
5-2321
5-2331
5-2330
5-23011
102049
5-23018
102099
5-23019
5-23019
W72
W73
W99
W99-Left
WS92
W92
W92-Left
WS82
WS101
WS101
W101
W101
WS133
WS132
W132
WS151
WS151
W151
WS162
W162
W201
WS201
WS202
WS202-Left
W972
W973
W979
W995
W996
W997
W912
W913
W916
W921
W928
W928
T5050
T5050-Left
–
WW93
WW94
WW935
WW944
WW944-Left
T721
T731
T991
T991
TS921
T921
T921
TS821
TS1011
TS1011-Left
T1011
T1011-Left
TS1331
TS1321
T1321
TS1511
TS1511-Left
T1511
TS1621
T1621
T2011
TS2011
TS2021
TS2021
T9721
T9731
T9791
T9951
T9961
T9971
T9121
T9131
T9161
T9211
T9281
T9281-Left
T5050
T5050
TT9111
TT931
TT941
TT9351
TT9441
TT9441
2.2
3.0
3.5
3.5
4.75
5.0
5.0
5.6
4.0
4.0
4.5
4.5
3.5
4.75
5.5
4.0
4.0
4.5
4.75
5.0
4.5
4.0
5.6
5.6
2.1
2.8
2.5
3.4
4.0
4.0
4.75
4.0
4.75
4.0
4.0
4.0
5.0
5.0
3.0
2.9
3.43
3.5
4.4
4.4
1200
1200
1500
1500
1800
1700
1700
1500
2000
2000
2000
2000
2100
2100
2100
2500
2500
2500
2500
2500
3000
3000
3000
3000
1000
1100
1100
1300
1100
2000
1500
1900
2300
2900
4000
4000
5000
5000
1500
1500
1300
2500
2500
2500
1.7
2.4
3.5
3.5
5.8
5.8
5.8
5.6
5.4
5.4
6.0
6.0
5.0
6.8
7.9
6.8
6.8
7.7
8.0
8.5
9.2
8.0
11.3
11.3
1.5
2.0
2.0
3.0
3.0
5.0
5.0
5.0
7.5
7.5
11.0
11.0
11.0
11.0
3.0
3.0
3.0
5.0
7.5
7.5
1450
1450
1450
1450
1450
1050
1050
1450
1450
1450
1125
1125
1450
1450
1150
1450
1450
1125
1450
1050
1125
1450
1450
1450
1750
1750
1750
1750
1750
1750
1750
1750
1750
1750
1750
1750
1845
1845
1750
2800
2800
3400
3400
3400
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
GPM
PSI
HP
RPM
Shaft
Dia
3.6
3.6
4.2
4.2
4.0
4.2
4.2
4.0
2500
2500
2500
2500
3000
3000
3000
4000
6.0
6.0
7.0
7.0
8.0
9.0
9.0
11.0
1750
1750
1750
1750
3400
1750
1750
3400
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
*Duplex Pump
Series “44” (EZ Series) Solid Shaft Pumps
Part No.
Interpump
Model No.
GP
Model No.
102313
102313
5-23130
5-23131
5-23132
102318
102318GL
5-23171
W956
W956-Left
W959
W959
W186
W959
W959
–
EZ2536S
EZ2536S
EZ2542S
EZ2542S-Left
EZ3040S
EZ3042S
EZ3042S-Left
EZ4040S34
LANDA 71
PUMPS & PUMP KITS
Interpump / General Pumps (continued)
TX Solid Shaft Pump
Part No.
Model No.
102282
TX1510S34
GPM
PSI
HP
RPM
Shaft
Dia
4
3000
8.2
3400
24mm
TSF
Part No.
Model No.
GPM
PSI
HP
RPM
Shaft
Dia
102281
102277
102278
TSF2021
TSF2221
TSF2421
7
10.2
12
3600
3000
2500
17.3
21
20.5
1450
1750
1750
24mm
24mm
24mm
Large Frame Solid Shaft Pumps
Part No.
Interpump
Model No.
GP
Model No.
GPM
PSI
HP
RPM
Shaft
Dia
102004
5-23008
102086
102079
102092
102120
102006
102008
102012
102015
5-2329
W4A
WS104
WS153
WS135
W163
W203
W6
W8
W12
W15
W425
T41A
TS1041
TS1531
TS1351
T1631
T2031
T611
T81
T121
T151
T4251
12.0
8.0
8.0
11.0
10.0
9.0
7.0
21.0
35.0
43.0
6.6
900
1600
2175
2000
2500
3000
1000
1000
1000
1000
5800
7.2
7.5
10.0
15.0
17.0
18.2
11.6
14.5
24.0
29.7
25.0
650
1450
1450
1450
1080
1140
650
650
650
650
1000
35mm
35mm
35mm
32mm
32mm
32mm
35mm
35mm
35mm
35mm
35mm
Solid Shaft Car Wash Pumps
Part No.
Model No.
GPM
PSI
HP
RPM
Shaft
Dia
Ship Wt
LBS
102295
102293
102286
5-23081
102289
CW2040
CW24
CW3040
CW1012
CW81
5.0
5.0
5.0
12.0
20.0
2500
2500
3000
1200
1200
5.5
8.6
8.3
10.0
18.0
1250
1250
1250
900
1000
24mm
24mm
24mm
24mm
24mm
30
30
32
46
92
Hollow Shaft Direct Drive - Flange included
Part No.
Interpump
Model No.
GP
Model No.
GPM
PSI
HP
RPM
Shaft
Dia
5-23003
102202L
5-23001
5-23010
5-23000
5-23017
W905E
W905E-Left
WW906E
WW907E
WW906G
WW907G
T9051E
T9051E
TT9061E
TT9071E
TT9061G
TT9071G
2.11
2.11
2.1
2.8
2.1
2.8
1400
1400
1400
1500
1400
1500
2.0
2.0
2.0
3.0
2.0
2.8
1750
1750
3400
3400
3400
3400
5/8"
5/8"
5/8"
5/8"
3/4"
3/4"
EZ Series Hollow Shaft
72 LANDA
Part No.
Interpump
Model No.
GP
Model No.
GPM
PSI
HP
RPM
Shaft
Dia
102301
5-2314
5-23181
102304
102311
102307
102309
W956EZE
W959EZE
W950EZE
W953EZE
WW962EZG
WW960EZG
WW961EZG
EZ2536E
EZ2542E
EZ2545E
EZ2555E
EZ2545G
EZ3035G
EZ3040G
3.6
4.2
4.5
5.5
4.6
3.5
4.0
2500
2500
2500
2500
2500
2500
2500
6.2
7.2
7.9
9.0
7.9
6.0
6.8
1750
1750
3400
3400
3400
3400
3400
1-1/8"
1-1/8"
1-1/8"
1-1/8"
1"
1"
1"
PUMPS & PUMP KITS
Your One Stop Shop for Parts
Interpump / General Pumps (continued)
Hollow Shaft Direct Drive – Flanged for direct couple to electric motors
Part No.
Model No.
GPM
102125
102125L
102126
5-23025
5-2303
TT9111EBF
TT9111EBF-Left
TT2021EBF
TT2028EBF
TT2035EBF
3.0
3.0
2.1
2.8
3.5
PSI
HP
RPM
Shaft
Dia
Ship Wt
LBS
1500
1500
2000
2000
2000
3.0
3.0
3.0
4.0
5.0
1750
1750
3400
3400
3400
5/8"
5/8"
5/8"
5/8"
3/4"
14
14
14
14
14
Hollow Shaft Direct Drive – Flanged for direct couple to gasoline engines
Part No.
Model No.
GPM
102130
5-23022
5-2301
102122L
TT1540GBF
TT2028GBF
TT2035GBF
TT2035GBF-Left
4.0
2.8
3.5
3.5
PSI
HP
RPM
Shaft
Dia
Ship Wt
LBS
1500
2000
2000
2000
5.5
5.0
6.5
6.5
3400
3400
3400
3400
3/4"
3/4"
3/4"
3/4"
14
14
14
14
Hollow Shaft Direct Drive – EZ Series flanged for direct couple gasoline engines
Part No.
Model No.
GPM
102324
5-23161
102327
EZ4030G34
EZ4035G34
EZ4040G34
3.0
3.5
4.0
PSI
HP
RPM
Shaft
Dia
Ship Wt
LBS
4000
4000
4000
10.0
10.0
11.0
3400
3400
3400
1"
1"
1"
21
21
21
TX Series Hollow Shaft Direct Drive – flanged for direct couple to 184TC electric motor
Part No.
Model No.
GPM
102335
102336
TX1810E179
TX1812E179
3.2
3.8
PSI
HP
RPM
Shaft
Dia
2000
2000
4.4
5.2
1750
1750
1 1/8
1 1/8
Interpump / General Pump Kit Selection Chart
Use this selection chart below and next page to find the correct repair kit for the specific Interpump / General Pump model.
Pump
Valve Kit
Oil Seal
Packings
Packing Assy.
Piston
Valve Cap
Piston Bolts
Head Ring
CW1012
Kit 62
Kit 37
Kit 113
Kit 67
1-69040109
–
Kit 74
Kit 65
Crankshaft Seal
Kit 32
EZ2542E
Kit 123
Kit 23
Kit 127
Kit 131
1-44040109
Kit 124
–
Kit 129
1-90169000
EZ2545E
Kit 123
Kit 23
Kit 88
Kit 130
1-52040009
Kit 124
–
Kit 90
1-90169000
EZ2542S
Kit 123
Kit 23
Kit 127
Kit 131
1-44040109
Kit 124
–
Kit 129
1-90164100
EZ3030G34
Kit 123
Kit 23
Kit 88
Kit 130
1-52040009
Kit 124
–
Kit 90
1-90169000
EZ3035G
Kit 123
Kit 23
Kit 88
Kit 130
1-52040009
Kit 124
–
Kit 90
1-90169000
EZ3040G
Kit 123
Kit 23
Kit 88
Kit 130
1-52040009
Kit 124
–
Kit 90
1-90169000
LANDA 73
PUMPS & PUMP KITS
Interpump / General Pump Kit Selection Chart
Use this selection chart below to find the correct repair kit for the specific General Pump model.
Pump Model
Valves
Oil Seal Piston
Packings
Packing w/Brass
Pistons
Valve Caps
Piston Bolts
Head Rings
Crank Oil Seal
EZ3040S
Kit 123
Kit 23
Kit 88
Kit 130
1-52040009
Kit 124
–
Kit 90
1-90164100
EZ3042S
Kit 123
Kit 23
Kit 127
Kit 131
1-44040109
Kit 124
–
Kit 129
1-90164100
EZ3045G
Kit 123
Kit 23
Kit 88
Kit 130
1-52040009
Kit 124
–
Kit 90
1-90169000
EZ4035G34
Kit 123
Kit 23
Kit 153
Kit 156
1-44040266
Kit 124
–
Kit 155
1-90169000
EZ4040S34
Kit 123
Kit 23
Kit 153
Kit 156
1-44040266
Kit 124
–
Kit 155
1-90164100
T731
Kit 1
Kit 23
Kit 19
Kit 27
1-50040409
Kit 4
Kit 6
Kit 21
1-90163400
T991
Kit 1
Kit 23
Kit 19
Kit 27
1-50040409
Kit 4
Kit 6
Kit 21
1-90163400
Kit 3
T921
Kit 1
Kit 2
Kit 148
Kit 29
1-47040509
Kit 4
Kit 6
Kit 11
T1011
Kit 1
Kit 2
Kit 69
Kit 28
1-47040409
Kit 4
Kit 6
Kit 7
Kit 3
T1321
Kit 1
Kit 2
Kit 148
Kit 29
1-47040509
Kit 4
Kit 6
Kit 11
Kit 3
T1631
Kit 1
Kit 24
Kit 148
Kit 28
1-47040509
Kit 4
Kit 6
Kit 11
–
T4251
Kit 122
Kit 44
Kit 77
Kit 78
1-61040056
–
–
Kit 7
Kit 32
T5050
Kit 150
Kit 2
Kit 109
Kit 151
1-47040856
–
–
Kit 108
Kit 3
T9051EBF
Kit 1
Kit 83
Kit 97
Kit 96
1-51040009
Kit 84
–
–
1-90164400
T9211
Kit 1
Kit 2
Kit 69
Kit 28
1-47040409
Kit 5
Kit 6
Kit 7
Kit 3
T9281
Kit 1
Kit 2
Kit 9
Kit 112
1-47040856
Kit 106
Kit 107
Kit 108
Kit 3
T9721
Kit 1
Kit 23
Kit 19
Kit 27
1-50040409
Kit 4
Kit 6
Kit 21
1-90163400
T9731
Kit 1
Kit 23
Kit 19
Kit 27
1-50040409
Kit 4
Kit 6
Kit 21
1-90164400
T9951
Kit 1
Kit 23
Kit 19
Kit 27
1-50040409
Kit 4
Kit 6
Kit 21
1-90163400
T9971
Kit 1
Kit 23
Kit 19
Kit 27
1-50040409
Kit 4
Kit 6
Kit 21
1-90163400
TS1011
Kit 1
Kit 2
Kit 69
Kit 28
1-47040409
Kit 4
Kit 6
Kit 7
Kit 3
TS1021
Kit 1
Kit 2
Kit 69
Kit 28
1-47040409
Kit 4
Kit 6
Kit 7
Kit 3
TS1041
Kit 62
Kit 37
Kit 69
Kit 82
1-47040409
–
Kit 54
Kit 7
Kit 32
TS1321
Kit 1
Kit 2
Kit 148
Kit 29
1-47040509
Kit 4
Kit 6
Kit 11
Kit 3
TS1331-B
Kit 1
Kit 2
Kit 69
Kit 28
1-47040409
Kit 4
Kit 6
Kit 7
Kit 3
TS1511
Kit 1
Kit 2
Kit 69
Kit 28
1-47040409
Kit 4
Kit 6
Kit 7
Kit 3
TS1531
Kit 62
Kit 37
Kit 69
Kit 82
1-47040409
–
Kit 54
Kit 7
Kit 32
TS2011
Kit 1
Kit 2
Kit 69
Kit 28
1-47040409
Kit 5
Kit 6
Kit 7
Kit 3
TS2021
Kit 1
Kit 2
Kit 69
Kit 28
1-47040409
Kit 5
Kit 6
Kit 7
Kit 3
TT941
Kit 1
Kit 83
Kit 97
Kit 96
1-51040009
Kit 84
–
–
1-90163400
TT2028
Kit 1
Kit 83
Kit 97
Kit 96
1-51040009
Kit 84
–
–
1-90164400
TT2035
Kit 1
Kit 83
Kit 97
Kit 96
1-51040009
Kit 84
–
1-90164400
TT9061
Kit 1
Kit 83
Kit 97
Kit 96
1-51040009
Kit 84
–
–
1-90164400
TT9071
Kit 1
Kit 83
Kit 97
Kit 96
1-51040009
Kit 84
–
–
1-90164400
TT9111
Kit 1
Kit 83
Kit 141
Kit 140
1-51040166
Kit 84
–
–
1-90163400
TT9441
Kit 1
Kit 23
Kit 88
Kit 92
1-52040009
Kit 4
–
–
1-90163400
Pump
Valve Kit
Oil Seal
Packings
Valve Cap
Crankshaft Oil Seal
TSF2021
KIT 169
KIT 2
KIT 171
104800
KIT 3
TSF2221
KIT 169
KIT 2
KIT 173
107921
KIT 3
TSF2421
KIT 169
KIT 2
KIT 182
107923
KIT 3
Pump
Valve Kit
Oil Seal
Packings
Packing Assy.
Ceramic
Valve Cap
Int Ring
Short Packing
Soft Packing
Long Packing Kit
TX1510534
KIT 123
KIT 159
–
–
1-52040009
KIT 124
KIT 164
KIT 160
KIT 162
KIT 166
–
TX1810E179
KIT 123
KIT 159
KIT 161
KIT 167
1-52040009
KIT 124
KIT 165
–
–
–
KIT 163
TX1812E179
KIT 123
KIT 159
KIT 161
KIT 167
1-52040009
KIT 124
KIT 165
–
–
–
KIT 163
74 LANDA
Seal Retainer
PUMPS & PUMP KITS
Your One Stop Shop for Parts
Genuine Interpump / General Pump Kits
We stock a complete selection of original General Pump repair kits. See previous page for our kit selection chart.
• Complete selection of repair kits
Part No.
Description
Part No.
Description
Part No.
Description
1-0001
1-0002
Kit 1, Valve
Kit 2, Piston
Rod Oil Seal
Kit 3, Crankshaft
Oil Seal
Kit 4, Valve Caps
Kit 5, Valve Cap
Kit 6, Piston Bolt
Kit 7, Head Ring
Kit 8HP
20mm Packing
Kit 8HP, new style
Packing Kit
Kit 9
Packing Spacer
Kit 10, Retainer
20mm Packing
Kit 11, 22mm
Head Ring
Kit 12, 22mm
Packing
Kit 14, Retainer
22mm Packing
Kit 15
Packing Adapter
Kit 16, 24mm
Packing
Kit 17, 24mm
Intermediate Ring
Kit 18
Packing Retainer
Kit 19HP, 20mm
Packing
Kit 19, new style
Kit 20, 20mm
Intermediate Ring
Kit 21, 20mm
Head Ring
Kit 22, 20mm
Packing Retainer
Kit 23, Piston
Rod Oil Seal
Kit 24, Piston
Rod Oil Seal
Kit 26, Piston Bolt
Kit 27, 20mm
Packing Assembly
Kit 28, 20mm
Packing Assembly
Kit 29, 22mm
Packing Assembly
Kit 30, 24mm
Packing Assembly
Kit 32, Crankshaft
Oil Seal
Kit 37, Piston
Rod Oil Seal
Kit 38, 36mm
Packing
Kit 41
Packing Adapter
Kit 44, Piston
Rod Oil Seal
Kit 50, Valve Kit
Kit 51, Timax
Maintenance
Kit 58, K5 Maint.
1-0059
1-0060
Kit 59, K3 Maint.
Kit 60, K5
Complete Rebuild
Kit 61, K3
Complete Rebuild
Kit 62, Valve
Kit 63
30mm Packing
Kit 64, Packing
w/Intermed. Rings
Kit 65
30mm Head Ring
Kit 66
Packing Spacer
Kit 67, 30mm
Packing Assembly
Kit 69, 20mm
Packing w/Restop
Kit 70, K7 Maint.
Kit 71, Intermed.
Ring w/Restop
Kit 72, Maint. Kit
Kit 74, Piston Bolt
Kit 77, 20mm
Packing w/Restop
Kit 79, 45mm
Packing w/Restop
Kit 80, 45mm
Packing Assembly
Kit 81
Intermediate Ring
Kit 83, Oil Seal
Kit 84, Valve Cap
Kit 85
Complete Packing
Kit 86
Packing Retainer
Kit 87, Packing
Kit 88, Packing
EZ3040G
Kit 89
Intermediate Ring
Kit 90, Head Ring
Kit 91
Packing Retainer
Kit 92, Piston Seal
Kit 93
Control Set W2
Kit 94, Control Set
Kit 95,KRUnloader
Kit 96
Packing Assembly
Kit 97, Packing
Kit 98,ZKW1 Maint.
Kit 102
Unloader Maint.
Kit 105, P10 Maint.
Kit 106, Valve Cap
Kit 107, Piston Bolt
Pump T9281
Kit 108, Head Ring
for T-9281
Kit 109
16mm Packing
1-0110
Kit 110, 16mm
Intermediate Ring
Kit 111, Packing Retainer
16 mm, Pump T9281
Kit 112, 16mm
Packing Assembly
Kit 113,
Packing Assembly
Kit 118, Packing
Kit 119, Packing
Kit 120, Unloader
Kit 122, Valves
Kit 123, Valve
EZ3040
Kit 124, Valve Cap
and O-ring for EZ Pump
Kit 125, EZ Pump
Kit 126, EZ Pump
Kit 127, Packing
EZ2542S
Kit 129, Head Ring
EZ Series
Kit 130
Packing Complete
Kit 131, EZ Pump
Kit 134
Valve TH Pump
Kit 140, Packing
Assembly, T9111
Kit 141, General
Kit 148
22mm Packing
Kit 149, Ring
Intermediate
Kit 150, Valve
General T5050
Kit 151
Packing Retainer
Kit 153, Packing Kit
Kit 156
13mm Packing
Kit 201, Hot Kit Valve
Kit 159 Oil Seal
Kit 160
Short Packing
Kit 161 Packings
Kit 162 Packings
Kit 163
Seal Retainer
Kit 164 Int Ring
Kit 165 Int Ring
Kit 166 Long Kit 1
Kit 167
Packing Assy
Kit 169 Valve Kit
Kit 170LP Seal Kit
& HP Seal
Kit 171 Packings
Kit 172 Low/High
Packing
Kit 173 Packings
Kit 181 LP Seal Kit
& HP Seal
Kit 182 Packings
1-0003
1-0004
1-0005
1-0006
1-0007
1-0008
1-0008HP
103009X
1-0010
1-0011
1-0012
1-0014
1-0015
1-0016
1-0017
103018B
1-0019HP
1-0019
1-0020
1-0021
1-0022
1-0023
1-0024
1-0026
1-0027
1-0028
1-0029
1-0030
1-0032
1-0037
1-0038
1-0041
1-0044
1-0050
1-0051
1-0058
1-0061
1-0062
1-0063
1-0064
1-0065
1-0066
1-0067
1-0069
1-0070
1-0071
1-0072
1-0074
1-0077
1-0079
1-0080
1-0081
1-0083
1-0084
1-0085
1-0086
1-0087
1-0088
1-0089
1-0090
1-0091
1-0092
1-0093
1-0094
1-0095
1-0096
1-0097
1-0098
1-0102
1-0105
1-0106
1-0107
1-0108
1-0109
1-0111
1-0112
1-0113
1-0118
1-0119
1-0120
1-0122
1-0123
1-0124
1-0125
1-0126
1-0127
1-0129
1-0130
1-0131
1-0134
1-0140
1-0141
1-0148
1-0149
1-0150
1-0151
1-0153
1-0156
1-0201
103159B
103160B
103161B
103162B
103163B
103164B
103165B
103166B
103167B
103169B
103170B
103171B
103172B
103173B
103181B
103182B
LANDA 75
PUMPS & PUMP KITS
AR Triplex Ceramic Plunger Pumps
Direct Drive Gas Engine Flanged Models
101865
Part No.
Model No.
GPM
PSI
BHP
RPM
Shaft Dia
Weight lbs
101804
101704
101701
101718
101711
101702
101796
101792
101797
101865
101866
101867
101868
XTV3G16D-F7
XTV3G20D-F7
XTV3G22D-F7
XMV25G26D-F25
XMV3G30D-F24
XMV3G25D-F25
XMV35G25D-F24
XMV35G25D-F25
XMV4G30D-F24
RKV35G30AD-F24
RKV4G30AD-F24
RKV4G32D-F24
RKV4G35HD-F24
3.0
3.0
3.0
2.5
3.0
3.0
3.5
3.5
3.8
3.5
4.0
4.0
4.0
1600
2000
2200
2600
3000
2500
2500
2500
3000
3000
3000
3200
3500
3.0
4.0
4.5
5.0
6.0
5.0
5.5
5.5
7.5
5.0
7.5
8.5
10.0
3400
3400
3400
3400
3400
3400
3400
3400
3400
3400
3400
3400
3400
3/4"
3/4"
3/4"
3/4"
1"
3/4"
1"
3/4"
1"
1"
1"
1"
1"
10
11
11
19
19
19
19
19
19
21
21
21
21
Solid Shaft Models
101780
Part No.
Model No.
GPM
PSI
BHP
RPM
Shaft Dia
Weight lbs
101731
101734
101780
101870
101873
101875
101877
101765
101750
XTA3G22N
XTA3G19N
XMA3.5G25N
RKA4G20N
RKA4G30N
RKA4G35N
RKA4G40HN
XW2128N
XW2623
3.0
3.0
3.5
4.0
4.0
4.0
4.0
5.5
6.87
2200
1900
2500
2000
3000
3500
4000
4060
3400
4.5
4.0
5.5
5.0
7.5
10.0
11.0
15.0
15.0
1750
1750
1750
1750
1750
1750
1750
1450
1450
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
11
11
18
19
19
19
21
34
34
Direct Drive Electric Flanged Models
101730
76 LANDA
Part No.
Model No.
GPM
PSI
BHP
RPM
Shaft Dia
Weight lbs
101730
101801
101803
101737
101717
101756
101730
101755
101871
101872
XTA2G15E
XTV2G15EBA-F8
XTV3G16E-F8
XTV3G20E-F8
XTV3G22E-F8
XTA3G22E-F8
XTA2G15EBA-F8
XTA3G16EBA-F8
RKA4G20E-F17
RKA4G30E-F17
2.1
2.1
3.0
3.0
3.0
3.0
2.1
3.0
4.0
4.0
1500
1500
1600
2000
2200
2200
1800
1600
2000
3000
2.0
2.0
3.0
4.0
4.5
4.5
3.0
3.0
5.0
7.5
1750
3400
3400
3400
3400
1750
1750
1750
1750
1750
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
1-1/8"
1-1/8"
9
10
10
11
11
11
10
10
21
21
PUMPS & PUMP KITS
Your One Stop Shop for Parts
AR Pump Repair Kit Selection Chart
Use the following chart to find AR Repair Kits by pump model number. See next page for AR kit pricing. We also stock a broad selection
of non-kit AR repair parts.
Pump Model
Water Seals
Check Valves
Oil Seals
Piston Kit
Piston Guide
Support Rings
Hot Kit
XJV
AR002798
AR001864
AR002797
AR002796
AR1980180 ea
AR1980190 ea
NA
XJW
AR002800
AR001864
AR002797
AR002796
AR1980180 ea
AR1980190 ea
NA
XT-15MM
AR001866
AR001864
AR001872-N ver
AR002628
AR1260151 ea
AR1520120 ea
AR002029-V
XT-18MM
AR001874
AR001864
AR001872-N ver
AR002629
AR1260450 ea
AR1320340 ea
AR002725-H/D
AR002030-V
AR002726-H/D
XTA-15MM
AR001866
AR001864
AR001860-E ver
AR002628
AR1260151 ea
AR1520120 ea
XTA-18MM
AR001874
AR001864
AR001860-E ver
AR002629
AR1260450 ea
AR1320340 ea
AR002030-V
XTV
AR001866
AR001864
AR001860-D, E ver
AR002628
AR1260151 ea
AR1520120 ea
AR002029-V
XM-15MM
AR002741
AR001864
AR002544
AR1780090 ea F
AR002740
AR001872-N ver
AR002786-N ver
AR002029-V
AR002725-H/D
AR002776
AR1780100 ea R
XM-18MM
AR002747
AR001864
AR002786-N ver
AR002545
AR1780110 ea F
AR002745
AR002777
AR1780120 ea R
XMA-15MM
AR002741
AR001864
AR002786-N ver
AR002544
AR1780090 ea F
AR002740
AR002776
AR1780100 ea R
XMA-18MM
AR002747
AR001864
AR002786-N ver
AR002545
AR1780110 ea F
AR002787-E ver
XMV
AR002741
AR001864
AR002786-N ver
AR002544
AR002745
AR002777
AR1780120 ea R
AR1780090 ea F
AR002787-D ver
AR002740
AR002776
AR1780100 ea R
XRC-18MM
AR001857
AR001828
AR001855- N ver
AR002546
AR1380090 ea
AR001829
AR002809
XRC-20MM
AR001887
AR001828
AR001855- N ver
AR002547
AR1380150 ea
AR001815
AR002810
XRCA-18MM
AR001857
AR001828
AR001855- N ver
AR002546
AR1380090 ea
AR001829
AR002809
AR1380150 ea
AR001815
AR002810
AR001856-E ver
XRCA-20MM
AR001887
AR001828
AR001855- N ver
AR002547
AR001856-E ver
XRCV
AR001857
AR001828
AR001856-D, E ver
AR002546
AR1380090 ea
AR001829
AR002809
RK-18MM
AR001857
AR002864
AR001855-N ver
AR002546
AR1380090 ea
AR001829
AR002809
RK-20MM
AR001887
AR002864
AR001855-N ver
AR002547
AR1380150 ea
AR001815
AR002810
RKA-18MM
AR001857
AR002864
AR001855-N ver
AR002546
AR1380090 ea
AR001829
AR002809
RKA-20MM
AR001887
AR002864
AR001855-N ver
AR002547
AR1380150 ea
AR001815
AR002810
RKV
AR001857
AR001828
AR001856
AR002546
AR1380090 ea
AR001829
AR002809
XW-20MM
AR002782
AR002780
AR002781
AR002642
AR002784
NA
AR002778
XW-22MM
AR002783
AR002780
AR002781
AR001891
AR002785
NA
AR002779
XWA-20MM
AR002782
AR002780
AR002781
AR002642
AR002784
NA
AR002778
XWA-22MM
AR002783
AR002780
AR002781
AR001891
AR002785
NA
AR002779
SXW-18MM
AR002874
AR002871
AR002873
AR002548
AR002875
NA
NA
LANDA 77
PUMPS & PUMP KITS
AR Pump Kits
Original Factory Direct Repair Kits. See previous page for kit selection chart. Don’t see
what you’re looking for? Give us a call. We stock a broad selection of AR replacement parts
AR piston kits contain all that you need to repair broken pistons. O-rings, Washer, nuts,
plungers…YOU GET IT ALL!
AR001864
Part No.
Description
Part No.
Description
83-1804
83-1805
83-1806
83-1815
83-1825
83-1826
83-1828
83-1829
83-1830
83-1842
83-1843
83-1855
83-1856
83-1857
83-1860
83-1864
83-1865
83-1866
83-1869
83-1872
83-1873
83-1874
Packing
Packing, 20mm
Pump
Piston
Valve Kit
Piston Bolt
Valve
Ring, Support XRA/XRV Series
Repair, AR 2882 - O-Rings Only
Piston, XRA/XRV Series
Piston, XRA, XR
Oil Seal, XRA Series
Oil Seal, XRV
Packing XRA/XRV Series
Seal, Oil, XTV Series
Valve Kit
Oil Seal
Packing Kit
Repair Unloader
Oil Seal
Oil Seal Kit Complete
Packing
83-1887
83-2031
83-2043
83-2044
83-2544
83-2546
83-2624
83-2628
AR002542
83-2697
83-2740
83-2741
83-2744
83-2747
83-2776
83-2780
83-2781
83-2782
83-2784
83-2786
Water Seals
Viton Seal, XRA
Oil Seal
Seal
Piston, XM Series
Piston XRCA/XRCV
Seal
AR Piston #2628
Piston, XWA8G30N-SX
Repair, Combi-Set
Support Ring, XM Series
Water Seal, XM
XFV Manifold Assy
Packing, 18mm, XMA Series
Hot/Dry Cup
Valve, XWA8G30N-SX
Seal, XWA8G30N-SX
Piston Seal, XWA8G30N-SX
Piston Guide, XWA8G30N-SX
Oil Seals, XMA35G25N
Comet Pumps & Pump Kits
For use in homeowner or light commercial duty pressure Washer.
• One piece bronze connection rods
• Built in unloader
• Increased surface area for lower
operating temperatures
• Ultra high pressure head
Part No.
Model No.
GPM
PSI
RPM
Shaft Dia
5-2100
5-2102
AXD 3020 G
AXD 2527 G
2.75
2.5
2000
2700
3400
3400
3/4"
3/4"
Comet kits and parts are available for any Comet model. Call with model number for quick and accurate service.
78 LANDA
Part No.
Model No.
CT0202002000
CT0202002200
CT5019003500
CT5019003800
CT5019004500
CT5019006400
CT5019006500
CT5019007700
CT5025001100
Piston 15mm FWD
Piston 18mm FWD
Seal Kit LWD HP
Packing Kit FWS / FWD
Seal Kit Oil LW Series Hollow
Seal Kit ZWD4030G
Seal Kit Hollow Shaft Pumps
Seal Kit AXD3020
Valve Kit ZWD / FWS / FWD / HW / FW / LW
PUMPS & PUMP KITS
Your One Stop Shop for Parts
Ceramic Plungers
Piston Pumps
Precision ground, high polish, solid ceramic plungers, designed
for long life even under constant use.
Part No.
Size
1-44040109
1-44040266
1-46040009
1-47040409
1-47040509
104807
1-47040856
1-50040409
1-51040009
1-51040109
1-52040009
104810
104811
1-69040109
104802
104815
18mm (EZ)
13mm, EZ Series
W50 Pump
20mm, (1.970" length)
22mm
24mm, 47040609
16mm
20mm, (1.570" length)
15mm
18mm, TP Series
15mm (EZ)
20mm, 61040056
36mm, 69040009
30mm
30mm, 76040056
45mm, 76040209
• Cast iron body
• Stainless steel
check valves
• Complete with base
or torque arm
100315
Part No.
•
•
•
•
Hypro
GPM
PSI
RPM
5315
5320
5321
5324
5325
5330
1.5
2.0
2.2
2.9
2.5
3
500
500
1000
800
500
500
1750
1750
1750
1750
1750
1750
100315
5315
1.5
500
100316*
5315
1.5
500
5-2028
5320
2.0
500
5-2026
5321
2.2
1000
100324
5324
2.9
800
5-2021
5325
2.5
500
5-2023
5330
3.0
500
100301 Injector Head 5320/5330 Pump
100306 Injector Head 5321/5324 Pump
1750
1750
1750
1750
1750
1750
1750
Buna cups
140° except 5321
180° 5321
1/2 NPT Ports
Solid Shaft
100314
5-20231
5-2027
100325
5-2022
5-2024
Hollow Shaft
Packing & Seal Kits
*100316 Has Teflon Seals
UPC, General Pump and Interpump Replacement Kits
Time-tested Quality Parts Meet
or Exceed Factory Specifications
Pump Parts & Tools
For 5300 series pump.
Part No.
Description
103001X
103002X
103003X
103008X*
103009X*
103012X*
103019X*
103023X
103024X
103027X*
103028X*
103029X*
103037X
103083X
103087X
103097X
Kit 1, Check Valve
Kit 2, Oil Seal
Kit 3, Crankshaft Oil Seal
Kit 8, V-Packing
Kit 9, Intermed Packing
Kit 12, V-Packing
Kit 19, V-Packing
Kit 23, Crankcase Oil Seal
Kit 24, Crankcase Oil Seal
Kit 27, Plunger Repair
Kit 28, Plunger Repair
Kit 29, Plunger Repair
Kit 37, Oil Seal
Kit 83, Oil Seal
Kit 87, V-Packing
Kit 97, Packing
• A necessity for working
on 5300 series pumps
• Rugged construction
Valve Seat Tools
Piston Repair Kit
Valve Cage Tools
Part No.
Description
8-34300010
8-34300144
8-34300197
449052
449071
Piston Repair Kit (Model 5320 pump)
Piston Repair Kit (Model 5321 pump)
Check Valve Kit (All 5300 Pumps)
Valve Cage Tool
Valve Seat Tool
NOTE: Piston Repair Kits have Buna seal
Jetter Pulse Valves
*These are old style kits to replace components in Interpump/General pumps with two brown Buna-V
packings; (pumps built before the change was made to restop ring and black low-pressure seals.)
Replaces valve cap to create pulsation action, to move nozzle
in pipe cleaning applications.
O-Ring Tool
Indispensable for Pump Repair. Excellent for removing O-Rings, seals, etc.
• 6" long dental pick
• Stainless steel
Part No.
Description
249737
Dental Pick
• Knurled handle
• Double-end
Part No.
Description
1-100316
1-100317
1-100315
For EZ Pumps
For 47 Series Pumps
For TT Pumps
LANDA 79
PUMPS & PUMP KITS
Accumulator
V-Packing Insertion Tool Kit
Pulse Dampener.
Contains Inserting Tools for installing 20mm, 22mm and 24mm V-Packings
in the Packing Gland. Prevents damaged sealing surfaces.
• 3/4" MPT connector
• 1350 PSI
Part No.
381110
• 10 GPM
• Weight 1 lb
Description
Accumulator
Part No.
Description
1-ZMVTOOL
V-Packing Kit
Accumulator - Pulse Dampener
• Max Temp - 180°F
• Precharge Pressure
580 PSI
381102
Pump Oil
381104
Part No.
Working PSI
Capacity
Inlet
381102
381103
381104
3100
3100
4400
21.4 CU"
6.1 CU"
2.5 CU"
1/2"F
3/8"F
3/8"F
• Formulated to exceed the factory specifications for LANDA, Admiral,
AR, Interpump, General and other high pressure pumps.
• Quart or gallon size
Part No.
Description
90-8006
32 oz Landa Pump Oil
Packing Extractor
Virtually Unbreakable Sockets will pull Packings from Interpump,
General and other brand pumps.
Easy to Use: Slide-Hammer (shown below) attaches to Slotted Socket–which expands inside
the Packing Gland. The Slide Hammer then pops the Packing Gland Brass out of the Head to
facilitate easy seal repairs without damage to Brass Support Rings.
Part No.
Pump Oil
Formulated to meet the factory specifications for Admiral,
Interpumps, General Pumps and other high pressure pumps.
Description
Slide Hammer
449299
Hammer Only
Sockets for Regular Slide Hammer
449302
449301
449303
449304
449307
18mm Socket
15mm Socket
20mm Socket
22mm Socket
25mm Socket
Large Slide Hammer
449309
Large Slide Hammer
Sockets for Large Slide Hammer
449311
449312
449313
30mm Socket
38mm Socket
45mm Socket
Packing Extractor Tool
Expansion Tool inserts into Packing Gland to remove lodged
Packing Components.
Part No.
Description
449310
Extractor (only)
Expansion Sockets for Extractor Above
449315
449320
449322
449324
15mm (Ref Kit 86 & 97)
20mm (Ref Kit 8 & 19)
22mm (Ref Kit 12)
24mm (Ref Kit 16)
NOTE: 15mm Expansion Sockets also fit Admiral Pump W-Series pumps.
80 LANDA
Part No.
Description
112055
112075
Pump Oil (quart)
Case Lots (12 ea)
Pump Lube
• A premium quality lubricating oil fortified with additives
to reduce friction, foaming & corrosion
• Excellent for use in CAT PUMPS and other fine
precision machinery
Part No.
Description
112056
112076
Pump Lube (quart)
Case Lots (12 ea)
“Inter-Lube-Red” Gear Lube
Inter-Lube Red Gear Lube is a multi-viscosity SAE 80W 90
lubricant with anti-friction, anti-foaming and corrosion
inhibitor additives. Use in Admiral Geared Speed Reducers
and Interpump/General RS99, RS151, PTO as well as other
High Speed Gear Boxes.
Part No.
Description
112052X
112072X
Interlube (quart)
Case Lots (12 ea)
PUMPS & PUMP KITS
Your One Stop Shop for Parts
Geared Reduction
Geared Reduction Units
Specifically designed for Legacy and Admiral pumps
For use with 1450 RPM Interpump, General Pumps
and Admiral A-W99
• Engine-to-Pump drive units
• 2.1 to 1 reduction ratio
(3675 Eng. RPM=1750 Pump RPM)
• Engine shaft size = 1" or 1-1/8"
• Pump shaft size = 24mm or 30mm
RS99 – 2.4:1 Gear Reduction (3480 Eng. RPM = 1450 RPM Pump)
For 3-5 HP Briggs, Honda-Tecumseh-Kohler with 3/4" shaft
RS151 – 2.2:1 Gear Reduction (3190 eng. RPM = 1450 RPM pump)
For 7-18 HP Briggs, Honda engines with 1" or 1-1/8" shaft (must specify)
Use with the appropriate size: “WS” series Interpump, “TS” series General pump
• Eliminates belts, pulleys
& belt guards
Part No.
Fits Shaft Sizes
349120
349121
349122
24mm Pump x 1" Engine
30mm Pump x 1" Engine
30mm Pump x 1-1/8" Engine
Part No.
• Engine-to-Pump
drive units
• Improve efficiency
Engine Shaft
349009
RS-99
349009
Geared Reduction
3/4"
RS-151
349011
349013
Fits: Admiral - Interpump - AR - Comet - Udor - Hawk
• Engine-to-Pump drive units
• 2.18 to 1 reducer
• Fore 11-18 HP Gasoline Engine
1"
1-1/8"
349011
Flex Couplers
24mm Pump Shaft Couplers. Direct Drive Flex Coupling 24mm Interpump/General
& Admiral XLS Series Pumps to NEMA Standard Motor Shafts.
Part No.
Fits Shaft Sizes
349130
349131
1" Engine Shaft
1-1/8" Engine Shaft
PTO Geared Multiplier
• 1 to 1.9 speed multiplier
• 1-3/8" splined shaft (same shaft
as standard tractor PTO)
• 540 RPM PTO speed multiplied
to 1026 RPM at pump shaft
Part No.
Fits Shaft Sizes
349005
Gear Multiplier
2-Piece Coupler
Part No.
2-Piece Coupler
336028
336030
336032
336036
339112A
080320
NEMA Frame
Drive Shaft
56 A
5/8"
145 T
7/8"
184 T
1-1/8"
215 T
1-3/8"
Gas (Aluminum)
1"
Rubber Bumper - Replacement
Flanges
Anti-Seize Compound
Recommended for All Metal to Metal Power Drive Assemblies – Facilitates
Removal After Use.
• Copper - Graphite or Nickel
• Copper - Graphite High torque for high
temperature to 1800°F
• Nickel continues to work up to 2400°F
• Stops rust, galling & seizure on pulley/shaft
or gear/shaft interfaces
Part No.
Description
112299
112305
Blister Pack (1 appl) copper - graphite
8 oz Brush Top Can - nickel
Direct Attachment of Interpump/General Pumps to NEMA Standard C-Face Motors.
NOTE: Flange 336020 & 336024 also fit Admiral XLS and 24mm XD pumps
Part No.
NEMA Frame
336020
336024
336025
339120
56/145TC
184TC
215TC
8-13 HP(G)
Drive Shaft
W973
W995
W913
WW161
LANDA 81
UNLOADERS
Automatic Pressure Regulator
550 Regulator / Unloader
Integral Regulator For Admiral Pumps: WE - WG - WEL - XLS - XLE - XLG
bolt on for Admiral and Legacy Pumps. Trapped pressure regulator specifically
designed for use on the Admiral plunger pumps. Integral inlet, bypass and outlet
eliminates the need for bypass hose.
The Quality Performer – Simple & Effective
•
•
•
•
6 GPM
3200 psi
195°F
Forged brass body
• 1/2" MPT inlet
• 3/8" MPT outlet
• Stainless steel plunger
& seat valve
• 29 oz weight
106020
Part No.
Description
106020
106022
109139
109139X
109140
APR-Brass/ Black 3/8"
APR-Brass/ Black 1/2"
Seal Repair Kit - 3/8"
Seal Repair Kit - 1/2"
Valve Seat Repair Kit
•
•
•
•
Part No.
Description
462335
462335K
109060
109062
without Knob
with Knob
Seal Repair Kit
Valve Seat Repair Kit
• Forged brass body
• 3/8" FPT outlet
& (2) inlet ports
• 1/4" FPT bypass
• 22 oz weight
550 Regulator / Unloader
with Bypass Switch
Same features as 550 (above); Integral switch detects Full Bypass Mode.
Regulators / Unloaders
• Normally Open (NO) or Normally
Closed (NC) operation
• Use for burner control or time
delay shutdown
• 29 oz weight
Basic Valves. Premium Performance.
• Forged brass body
• Stainless steel seat
& piston
8 GPM
3600 psi
200°F
Stainless steel valve
• 3/8" MPT inlet,
outlet & bypass
• 200°F
520 Regulator / Unloader
• Rated @ 2000 psi
• 13 oz weight
462320
• Tested up to 2400 psi
• 8 GPM
540 Regulator / Unloader
• Rated @ 2600 psi
• 15 oz weight
• Tested up to 2800 psi
• 8 GPM
560 Regulator / Unloader
• Rated @ 3200 psi
• 15 oz weight
• Tested up to 3400 psi
• 8 GPM
Part No.
Description
462336
462336K
109060
109062
082022
109041
without Knob
with Knob
Seal Repair Kit
Unloader Seat Repair Kit
Replacement Micro Switch
Knob only (550)
Regulator / Unloader 580
Repair Kits
• For use with 520, 540, and 560 Regulator/Unloaders
Single Inlet.
462320K
Part No.
Description
462320
5-3505
462330
462330K
462340K
109177
109178
520 without Knob
520 with Knob
540 without Knob
540 with Knob
560 with Knob
Seal Repair Kit
Valve Seat Repair Kit
82 LANDA
•
•
•
•
8 GPM
3600 psi
200°F
3/8" MPT inlet & outlet,
1/4" FPT bypass
• Adjustable pressure
setting nut
Part No.
Description
463350
463350K
109060
109062
without Knob
with Knob
Seal Repair Kit
Valve Seat Repair Kit
• Heavy-duty forged
brass body
• Stainless steel ball
& valve seat
• High temperature Viton seals
• Adjustable upper pressure
limit lock
UNLOADERS
Your One Stop Shop for Parts
Pulsar Unloaders
VB75 / VB135
• Pulsar 3 Blue rated 3200 psi
– Max 3650 psi
• Pulsar 3 White rated 1400 psi
– Max 1750 psi
• Pulsar 280 HP rated 4050 psi
– Max 4350 psi
• 195°F
Part No.
Description
462650
462651
462653
462654
5-3020
111100
12-60007224
Pulsar 3 (Blue) with Knob
Pulsar 3 (Blue) without Knob
Pulsar 3 (White) without Knob
Pulsar 3 (White) with Knob
Pulsar 280 HP
Repair Kit – Pulsar 3
Repair Kit – 280 HP
•
•
•
•
•
•
8 GPM
All stainless steel valves
Pressure actuated
Forged body
3/8" FPT inlet, outlet
Two 3/8" FPT bypass ports
The VB75 is an integrated unloader for INTERPUMP/GENERAL pumps
with 7.8 GPM – 3600 psi max pressure. The VB135 fits Interpump “WW” Series
Pumps and General “TT” Series Pumps with 6.5 GPM – 2600 psi max pressure.
VB75
VB135
• Rated pressure: 3200 psi
• 200°F
• 3/8" MPT inlet,
1/4" FPT gauge port
• 3/8" FPT outlet & bypass
• 19.7 oz weight
•
•
•
•
•
Rated pressure: 2300 psi
200°F
Stainless internals
Forged brass body
22.9 oz weight
VB75
Part No.
VB135
VB7 Regulator / Unloader
VB75
463672
5-3025
111175
463600
VB135
5-3024
463600
Description
Series 44 pumps (EZ)
Series 47 pumps (W151)
Seal Kit
Knob Only
VB 135
Knob Only
Fits CAT 4SF pumps and other pumps; 7.8 GPM – 3600 psi max pressure.
• Rated pressure: 3200 psi
• 200°F
• 3/8" MPT inlet,
1/4" FPT gauge port
Part No.
Description
463670
5-3021
111175
463600
without Knob
with Knob
Repair Kit
Knob Only
• 3/8" FPT outlet & bypass
• 19.7 oz weight
VB350/4 Unloader
Bigger. Stronger. Faster - 5600 psi max pressure
•
•
•
•
•
•
VB130 Regulator / Unloader
Fits CAT 2SF pumps and other pumps; 6.6 GPM – 2600 psi max pressure.
•
•
•
•
Rated pressure: 2300 psi
200°F
3/8" MPT inlet & outlet
3/8" FPT bypass
Part No.
Description
463660
5-3023
111150
463600
without Knob
with Knob
Repair Kit
Knob Only
• Stainless steel plunger
• Stainless steel valve seat
• 14.7 oz weight
10.5 GPM
Rated 5100 psi
Max 5600 psi
195°F
Forged bronze body
31 oz weight
• Stainless steel plunger
& valve seat
• 3/8" FPT outlet & bypass
• 1/2" F bypass
• 3/8" MPT inlet,
1/4" gauge port
Part No.
Description
5-3014
111200X
111901
Unloader Red Knob
Repair Kit - Old VB 350
Repair Kit - Red Knob Version
Automatic Pressure Compensating
Unloader Valves VB10 / VB9
7.8 GPM - 3600 psi max pressure
• Rated 3200 psi
• 194°F
• Reduces trapped pressure
to 25% of operating pressure
when unloading; allows
easier gun trigger pull
• Instant pressure response
Regulator / Unloader 21 Gallon
VB 80/280: 21 GPM – 4300 psi max; VB 80/150: 21 GPM – 2400 psi max.
• Hex-shaped non-stick
check valve
• 3/8" in/out/bypass
• Brass valve body/stainless
ball & seat
• Knob included
• VB9 - Panel mountable
VB10
•
•
•
•
VB80/280 rated @ 4000 psi
VB80/150 rated @ 2200 psi
200°F
Pressure actuated
• Forged brass body
• Stainless steel plunger
& seat
• 1/2" FPT in-out-bypass
• 45 oz weight
Part No.
Description
Spring
5-3012
5-30121
111300
VB80/280
VB80/150
Blue
White
Repair Kit
Part No.
Description
5-3015
5-3013
111336
111400
111401
VB9 with Knob
VB10 with Knob
Repair Kit VB9
Repair Kit VB10
Seal Kit VB10
VB9
LANDA 83
UNLOADERS
VB200 / 150 High Volume Unloader
• 52.5 GPM
• Forged bronze body
• Large plastic knob
(removable)
• Lock nut on
pressure adjustment
•
•
•
•
2175 psi
194°F
1" FPT Inlet, outlet & bypass
Two 5/16" – 18 bolt
mounting ports
• 73.5 oz weight
Part No.
Description
463714
463715
111550
VB 200/150 without Knob
VB 200/150 with Knob
Repair Kit
“K” Series
Pressure Regulators
Unloaders relieve line pressure in bypass mode.
• 3/8" FPT Inlet
K3 - 0-1500 psi
VB80 / 400 Stainless Steel Unloader
21 GPM – 6200 psi max pressure.
•
•
•
•
K5 - 1000-3000 psi
Rated 5800 psi
• Viton seals
Forged stainless steel body
• 1/2" FPT inlet, outlet
& bypass
195°F
All stainless steel valve parts
Part No.
Description
462656
111340
VB 80/400
Repair Kit
• 165°F
• 1/2" FPT B
Part No.
Model
GPM
Outlet
K3
5-30020
5-30021
5-3002
5-30022
462530E
462531E
462532E
462533E
K3.0
K3.1
K3.2
K3.3
K3.0
K3.1
K3.2
K3.3
2.10-2.90
2.90-4.22
4.22-5.55
5.00-6.50
2.10-2.90
2.90-4.22
4.22-5.55
5.00-6.50
3/8" M
3/8" M
3/8" M
3/8" M
1/2" M
1/2" M
1/2" M
1/2" M
K5
5-30011
5-3001
5-30012
462551E
462552E
462553E
K5.1
K5.2
K5.3
K5.1
K5.2
K5.3
2.90-4.22
4.22-6.60
6.60-10.83
2.90-4.22
4.22-6.60
6.60-10.83
3/8" M
3/8" M
3/8" M
1/2" M
1/2" M
1/2" M
NOTE: 1) Use #140070 Back nut on bypass nipple when mounting
1/2" bypass line on K3 & K5’s. 2) Use restricted (.156 - .225 ID)
orifice in bypass line for smoother operation/pressure balancing.
• 3/8" FPT
Control Set “W” Series /
Integrated Regulator /
Unloader
Designed exclusively to fit INTERPUMP and GENERAL pumps.
K7 - 0-3000 psi
• Mounts directly on pump inlet
and outlet; internal bypass loop
• Pressure actuated:
“Instant - On”
• 3/8" MPT outlets
• Integrated injector - optional
• Pressure and flow engineered
for specific pump models
• 165°F
Part No.
Model
GPM
Outlet
5-30030
5-30031
5-3003
462573
K7.0
K7.1
K7.2
K7.3
2.11-2.90
2.90-4.22
4.22-6.60
6.60-10.8
3/8" M
3/8" M
3/8" M
3/8" M
• 3/8" inlet
• 1/2" discharge
• 1/2" bypass
• 165°F
Part No.
Model
GPM
Outlet
462525
ZK1
2.4-10.8
1/2" M
ZK1 - 0-3600 psi
Part No.
Model
GPM
“W” Series Unloaders
462636
W1
4.00
462639
W1-L
4.00
462643
W2
5.56
462644
W2-L
5.56
103093B
W2/W2L Rebuild Kit
103098B
W1/W1L Rebuild Kit
“W” Series Unloaders with Injectors
462635
W1-0
2.1-2.9
462640
W1L-1
3.0-4.0
462642
W2-1
2.9-4.0
462645
W2L-1
2.9-4.0
462647
W2L-2
4.2-5.5
103094B
Injector Maintenance Kit
84 LANDA
PSI
Pump
1600
1600
3000
3000
W905
W99
W997
W201
• 1/2" FPT
• 165°F
Part No.
Model
GPM
Outlet
462574
K9
13.2
1/2" M
K9 - 0-5800 psi
1600
1600
3000
3000
3000
W907
W99
W997
W201
WS202
Repair Kits for All K3, K5, K7 and K9 models
Part No.
Description
1-0059
1-0061
1-0058
1-0060
K3 Maintenance Kit
K3 Rebuild Kit
K5 Maintenance Kit
K5 Rebuild Kit
UNLOADERS
Your One Stop Shop for Parts
HM Regulator / Unloader
• Excess flow is bypassed to
maintain selected pressure
• Will operate on single
or multiple gun systems
• Brass body - Stainless steel
valve & seat
• 3/8" FPT inlet
ST-261 Regulator / Unloader
• 3/8" MPT outlet
• 3/8" FPT bypass
• Flow range of 1.4
to 10.8 GPM
• Pressure adjustable
0-3000 psi
Part No.
Description
462575
103072B
HM Regulator/Unloader
Repair Kit
• 0–3600 psi regulation
• Forged brass body
• Viton seals
• 22.5 oz weight
• 180°F temperature rating
ST-261 Standard
Part No.
Description
5-3226
088211X
088209
088466
ST-261 STD
Seal Kit
Repair Kit “B”
Outlet Check Kit “A”
ST-261/S Unloader with Bypass Switch
Timax
Pressure Regulator Valve
• Max flow 52 GPM
• Max pressure 1000 psi
• Lever control manual dump
for bypass to relieve line
pressure
• 8 GPM
• Stainless steel plunger
& seat
• Switches at full bypass flow
• 10 Amp, 110/230V
• 3/4" & 1" FPT inlet & outlet
• 3/4" FPT bypass
• Brass body - SS piston
& seat
Part No.
Description
462580
103051B
Timax Regulator Valve
Repair Kit
Part No.
Description
5-3225
84-200261527
ST-261/S
Switch Seal Kit
ST-261/I Unloader with Chemical Injector
• Switches at full bypass flow
• 10 Amp, 110/230V
ST-230 Regulator / Relief Valve
• 8 GPM
• Mounts off-line –
No line restrictions
• Complete pressure regulation
0-3600 psi
• All brass body with stainless
steel piston and seat
• 200°F
• 14 oz weight
• 1/4" FPT Inlet & bypass
Part No.
Description
462590
087926
ST-230
Repair Kit
8 GPM
3600 psi
175°F
27.5 oz weight
• Wired N/C
(may be wired N/O)
Part No.
GPM
462691
462692
462693
088260X
088424
0.0–2.4
ST-261/I-1
2.4–3.5
ST-261/I-2
3.5–5.5
ST-261/I-3
Injector Repair without Barb
Injector Repair with Barb
Model
ST-261/SI Unloader with Switch and Injector
ST-280 Regulator / Unloader
•
•
•
•
• Wired N/C
(may be wired N/O)
• Brass housing stainless steel valve
• 3/8" FPT inlet/outlet
• 1/4" FPT bypass
Part No.
GPM
Model
462696
462697
462698
0.0–2.4
2.4–3.5
3.5–5.5
ST-261/SI-1
ST-261/SI-2
ST-261/SI-3
ST-261 Bypass Switch only
Part No.
Description
462680
088536
088535
088534
ST-280
Seat Repair Kit “D”
Piston Seal Kit “C”
Poppet Repair Kit
• Field mountable
• 10 Amp @ 115/230V
Part No.
Description
84-200260513
84-090000050
84-200261527
Switch Assy Complete
Micro Switch Only
Seal Kit for Micro Switch
• Switches at full bypass flow
• Wired N/C
(may be wired N/O)
LANDA 85
UNLOADERS
13 GPM Pressure
Actuated Unloaders
MG4000 Series Unloaders
“The world’s best unloader value” with a choice of PSI: 1500, 3000 or 4500.
• 800-3000 psi
• 160°F
• Bellville spring washers
minimize spikes
• Forged brass bodies/
stainless ball & seat
• Four 1/4" side ports
enhance versatility
• 1/2" FPT inlet, outlet
& bypass ports
• 57.3 oz weight
• Forged Brass Body
• 3/8" FPT inlet, outlet
& bypass
• Auxiliary 1/4" outlet
• 10 GPM
Part No.
Part No.
Model No.
Spring
462934
5-31032
5-31033
5-31034
81-12099
22910
22911
22912
22913
Repair Kit
Silver
Yellow
Red
Orange
PSI
800
1400
2400
3000
Pressure Actuated Unloaders
Without Knob
463108
463110
463114
With Knob
463108K
463110K
463114K
111442
•
•
•
•
200°F
Up to 4500 psi
Can be panel mounted
Pressure limit indicated
with color coded ring
Description
PSI
Yellow
Red
Black
1500
3000
4500
Yellow
Red
Black
Repair Kit
1500
3000
4500
MG4000 with Microswitch
462927
• Unloads pressure in entire
system when in bypass
• Forged bronze body
• Stainless steel seat
• 3/8" FPT inlet/ 3/8" FPT outlet
• 1/4" FPT bypass
• 160°F
462928
Part No.
Model
GPM
PSI
462927
462928
22760APM
22760APM
8
5
3000
4000
Part No.
Model No.
GPM
5-31029
462913
5-3104
5-3105
81-22666
22650
22654
22655
22656
Seal Kit
3.0–4.5
3.5–4.8
4.5–5.5
4.5–6.5
• 3/8" FPT inlet/
3/8" MPT outlet
• 1/2" bypass
• 160°F
PSI
3000
4000
3000
3000
Part No.
Description
PSI
463109K
463111K
463105K
463115K
Yellow
Red
Blue
Black
1500
3000
3600
4500
VRT Unloader Valves
Flow Actuated Unloaders
• Unloads pressure in entire
system when in bypass
• Forged bronze body
• Stainless steel seat
• Can be used as (NO)
• Up to 4500 psi
Normally Open or (NC)
• Panel mountable
Normally Closed
• 15 Amp Microswitch
• Use for time delay shut down
or as burner control
• Forged brass body
• Stainless internals
• Up to 4350 psi
Part No.
Description
PSI
462249
462250
5-3207
5-3208
83-005650213
AL605Y - Yellow
AL605 - Red
AL606 - Blue
AL607 - Black
Repair Kit
1450
2950
3650
4350
Hypro-Style Unloader
• All rated at 5 GPM
• Pressures from
400 to 1500 psi
• 180°F
• Buna-N seals
• 3/8 MPT inlet & outlet
• 8 oz weight
Part No.
PSI
462739
462740
5-3201
462745*
462748*
H34300223
200-500
1/4"
400-1000
1/4"
800-1500
1/4"
400-1000 Closed Coupled
800-1500 Closed Coupled
Repair Kit for All
*Bypass port not threaded
86 LANDA
• 200°F
• 7.8 GPM
• 3/8" in-out/bypass
FPT
UNLOADERS
Your One Stop Shop for Parts
Gymatic Unloaders
Unloader Mounting Block
End vibration-caused fitting failure, 3 styles available.
•
•
•
•
• 12 GPM
• 5500 psi
• Solid brass construction
RK & XM Series Pumps
3650 psi rated pressure
3-5.5 GPM
3/8" M Outlet
Part No.
Model No.
Description
462229
462226
462244
462235
462236
AR002611
AR20242
AR20242G
AR20081
AR20399
AR20400
1/2" F Inlet no injector
3/4" Inlet (GHF) with no injector
1/2" M Inlet fixed inj #1 (2-3 gal)
1/2" M Inlet adj inj #1 (2-3 gal)
1/2" M Inlet adj injector #2
Repair Kit
• 165°F
Part No.
Description
95-07101215/B
95-07101216/B
95-07101218/B
1/2" x 1/2"
3/8" x 3/8"
3/8" x 1/2"
YU - High Volume Unloader
AR Unloader
• Direct Mount
• Relieves pump head & fitting
stress due to vibration
• Mounting hardware included
• Dual Gun Valve
Part No. Description
GPM / PSI
5-3202 Zeromatic/83, AR2882
83-1830 Repair Kit, O-Rings Only
3-10 / 3600
• 21 GPM
• 1/2" FPT inlet, outlet
• 2 - 1/2" FPT bypass ports
• 200°F
• Forged brass body
• SS internals
YU-2121 Yellow Spring
• 2450 psi max pressure
• 2200 psi rated pressure
YU-2140 Green Spring
• 4350 psi max pressure
• 4050 psi rated pressure
Part No.
Description
462628
462629
111340
2121 Yellow Spring
2140 Green Spring
Repair Kit
J.E. Adams Unloader
• 3/8" FPT
• 200°F
AR Bolt On Unloaders
Mini-Matic Models.
• Fits XT and
XM Series Pumps
• 2600 psi rated pressure
• 1-2" F inlet
• 3/8" M Outlet
5-3009
Part No.
Model No.
Description
462228
462243
462246
462245
AR002812
AR20821
AR20890
AR21039
AR21040
Seal Kit
2-5 GPM, AL Bypass, No injector
2-3 GPM, AL Bypass, Adj injector
2-3 GPM, Brass Bypass, Adj injector
3-4 GPM, Brass Bypass, Adj injector
Part No.
GPM
5-3009
5-3010
85-7130
8
3000
8
2000
Repair Kit
PSI
Model No.
7300 - Red Spring
7100 - Brown Spring
MV-520 Unloader
•
•
•
•
NOTE: AR has discontinued the Combiset unloaders. Use Mini-Mate unloaders as replacements.
For 22mm twist coupler outlet models add Landa part # 331307 (3/8" x 22mm) to injector outlet.
3/8" MPT
3/8" FPT bypass
195°F
Stainless steel
seat & piston
Part No.
GPM
PSI
5-3505
8-34300397
8.0
2000
Repair Kit
Model No.
MV-520
LANDA 87
UNLOADERS
VS200 / 180 High Volume Regulator
• 53.5 GPM
• 2600 psi
• 194°F
• 3/4" FPT inlet
x 1/2" FPT bypass
• 29.4 oz weight
Part No.
Description
463705
111520
VS 200/180
Repair Kit
Safety Pressure Relief Valves
Engineered and built by Interpump. Premium quality valves for all
pressure systems.
• Adjustable pop off protection • Bypass & outlet
• Machined brass bodies
• S – R: Safety Valve 3000 psi
• Stainless steel plunger
@ 1.3 to 10.8 GPM
& seat
•
S
–
3:
Safety
Valve • 165°F
500 to 10,000 psi
• 3/8" MPT connect x 1/4" MPT
@ 2.6 to 26.5 GPM
VS350 Regulator / Relief Valve
• Rated pressure: 5100 psi
• 5600 psi
• 6.5 GPM
• 195°F
• 3/8" FPT inlet, outlet
& bypass
• 16.8 oz weight
Part No.
Description
390103
390123
S – R Valve
S – 3 Valve
Part No.
Description
Regulating Relief Valve
463720
111832
VS 350
Repair Kit
Economical replacement for paraplate BR5 Series.
Pressure Regulator
• 7 GPM
• Pressure adjusts
200-2000 psi
• 200°F
• 3/8" FPT Inlet, outlet
& bypass
• Lowers city water pressure for better
machine performance
• 10-125 psi
Part No.
Description
2-30074
Pressure Regulator
VS500 High Pressure
Regulator / Relief Valve
•
•
•
•
Rated pressure: 7250 psi
21 GPM
8100 psi
195°F
Part No.
Description
463725
111850
VS 500
Repair Kit
• Forged bronze body
• 1/2" FPT inlet & bypass
• 14.2 oz weight
88 LANDA
Relief Valve
Repair Kit
Amerimax Injector
The Higher Rate Injector. Our Best Seller!
Brass housing
Stainless Steel orifice
Fully adj metering valve
Stainless Steel spring
Part No.
6.3 GPM – 3600 psi max pressure.
Rated 3200 psi
200°F
Forged bronze body
Stainless steel plunger
& seat valve
Description
462585
075127
•
•
•
•
VS220 Regulator / Relief Valve
•
•
•
•
Part No.
•
•
•
•
Two 3/8" FPT inlets
3/8" FPT outlet/bypass
Compact design
14.2 oz weight
Part No.
Description
463655
111576
VS 220 without Knob
Repair Kit
• Flow-Thru design
for smooth operation
• Machined brass body
& knob
• Stainless steel plunger
& seal
Standard
360130
360131
360132
360133
075122X
• 3500 psi
• 3/8" MPT inlet/outlet
• 1/4" hose barb
Description
"0", 1-2 GPM
"1", 2-3 GPM
"2", 3-5 GPM
"3", 5-8 GPM
Repair Kit (SS check ball)
“Acid” Injector with Special Inlet Check Valve
360140X
"0A", 1-2 GPM
360141X
"1A", 2-3 GPM
360142X
"2A", 3-5 GPM
360143X
"3A", 5-8 GPM
075123X
Acid Repair Kit (Ceramic check ball)
UNLOADERS & VALVES
Your One Stop Shop for Parts
Quick-Coupled Amerimax
ST-64 Up Stream Injector
Assembled for Added Convenience - “Quick” couples to unloader outlet
and “Quick” couples hose to injector outlet.
Apply soap at high pressure. Restricts waterflow to create suction.
• Top-Quality quick-couplers:
3/8" plug inlet, 3/8" socket outlet
• 6' Industrial grade poly-braid reinforced tubing (will
not collapse, resists crimping, high chemical tolerance)
• Heavy-duty brass chemical filter with check valve
prevents loss of prime
Part No.
Description
Amerimax “QC”
360135X
Quick Coupled "0", 1–2 GPM
360136X
Quick Coupled "1", 2–3 GPM
360137X
Quick Coupled "2", 3–5 GPM
360138X
Quick Coupled "3", 5–8 GPM
075122X
Repair Kit (SS check ball)
Amerimax Acid “QC”
360145X
Quick Coupled "0A", 1-2 GPM
360146X
Quick Coupled "1A", 2-3 GPM
360147X
Quick Coupled "2A", 3-5 GPM
360148X
Quick Coupled "3A", 5-8 GPM
075123X
Acid Repair Kit (Ceramic check ball)
Part No.
Flow Rate
360155
360156
1.5-4.0 GPM
4.0-7.0 GPM
• Chemical strainer and
4' PVC tubing included!
• Adjustable with
ST-61 meter valve
• locking waterflow
adjustment
Flow orifice adjusts for machines from 2-8 GPM. Requires ST-61 (below)
to regulate Chemical Injection Rate.
• Forged brass body
• 3500 psi
• Stainless steel construction
• 210°F max
• Complete with hose and filter
Part No.
Description
3-1006
088424
ST-62
Repair Kit “F”
• 8 GPM
ST-61 Chemical
Metering Valve
• Snap-on attachment to ST-60, • Glass-filled polyamide body
ST-62, ST-261/I (usage
& valve parts
limited to these injectors)
• 1/4" hose barb
• Adjusts from off to full flow • Teflon® seals
4-011186
Part No.
140 psi
160°F
3/4" FGH inlet
3/4" MGH outlet
ST-62 Variable
Chemical Injector
5500 PSI Stainless Steel Chem Injector
3-1208
•
•
•
•
Description
GPM
PSI
3-1208
Non-Adjustable, Injector Only 2.0-4.0 5500
4-011186 Assembly
2.0-4.0 5500
Hi-Lo Injector
May be used on high side or low side of pump. Adjustable flow orifices plus
adjustable chemical valves. Standard features similar to ST-62.
Description
360163
360165
075136
075136X
Hi/Lo Injector with Meter Valve
without Chemical Adjust
Repair Kit
Seal Kit
Description
371161
ST-61
ST-60 Chemical Injector
Requires ST-61(above) to regulate chemical injection rate.
• Forged brass body
• Compact size
• Performance Range
• Machined brass body
Low side:
• 3/8" FPT inlet/outlet
.5-3.5 GPM @ 10-120 psi
High side:
2.0 - 8.0 GPM @ 3500 psi
Part No.
Part No.
Part No.
Description
360120
360121
360122
088424
1.50 – 2.25, ST-60/0
2.25 – 3.35, ST-60/1
3.35 – 5.00, ST-60/2
Repair Kit “F”
• Injection rate to 10%
LANDA 89
INJECTORS & VALVES
400 Series Chemical Injectors
Robokim Chemical Injectors
The Injector of choice.
• Forged brass body
• Stainless steel orifice
• Stainless steel inlet check
valve components
•
•
•
•
•
•
Orifice Selection
Orifice Dia.
Flow Rate
1.6mm
1.5-2.7 GPM
1.8mm
2.0-3.6 GPM
2.1mm
2.7-4.9 GPM
2.3mm
3.3-6.0 GPM
Teflon® valve seat
3/8" inlet & outlet (3 configurations)
Forged brass housing
Renewable orifices & check valve
3200 psi / 200°F
Options include: Quick-coupled, SS orifices/
acid-resistant check
• Only 5 oz weight
Part No.
MxM
MxF
Brass
1.6
360406
360416
1.8
360400
360410
2.1
360401
360411
2.3
360402
360412
Stainless Steel
1.6
360406S 360416S
1.8
360400S 360410S
2.1
360401S 360411S
2.3
360402S 360412S
Brass/Acid-Resistant
1.6
360406A 360416A
1.8
360400A 360410A
2.1
360401A 360411A
2.3
360402A 360412A
Stainless Steel/Acid-Resistant
1.6
360406AS 360416AS
1.8
360400AS 360410AS
2.1
360401AS 360411AS
2.3
360402AS 360412AS
FxM
360426
360420
360421
360422
360426S
360420S
360421S
360422S
3500 psi
180°F
3/8" MPT inlet/outlet
1/4" hose barb
Model No., GPM
Robokim with Plastic Meter Knob
360200
"0", 2.1-2.9
360201
"1", 3.0-4.0
360202
"2", 4.0-5.5
360203
"3", 5.5-10.8
Robokim with Brass Meter Knob
3-12041
"0", 2.1-2.9
3-12042
"1", 3.0-4.0
3-1204
"2", 4.0-5.5
3-12044
"3", 5.5-10.8
Kits
1-190000 Repair Kit
077010X
Acid Kit
Adjustable Injectors, Precise needle
metering valve.
Orifice
Size (mm)
•
•
•
•
Downstream Chem Injectors
Fixed Down Stream Injectors
–
360420A
360421A
360422A
360426AS
360420AS
360421AS
360422AS
• Down stream, non-adjustable
• Some with built in coupler and nipple
injector only
Complete assembly with hose and filter
Part No.
Description
Repair Kits include Check Ball, Spring, Seat & O-ring
109220X
Standard Kit
109222X
Acid Kit
Robokim Quick-Coupled
Chemical Injectors
• Quick-Couplers: 3/8" QC plug inlet,
3/8" QC socket outlet
• 6' Industrial Grade poly-braid
reinforced tubing
• Brass chemical filter with stainless
steel check valve
Part No.
Description
GPM
PSI
3-1201
3-1202
3-12021
4-0111831
4-011183
4-011184
Non-Adjustable, 190°, Injector only
Non-Adjustable, 190°, Injector only
Non-Adjustable, 190°, Injector only
Complete Assy with Hose, Filter
Complete Assy with Hose, Filter
Complete Assy with Hose, Filter
1.0-2.0
2.0-3.0
3.0-4.0
1.0-2.0
2.0-3.0
3.0-4.0
3500
3500
3500
3500
3500
3500
Adjustable Down Stream Injectors
• Down stream, adjustable
• With built in coupler and nipple
Model No., GPM
Robokim “QC” with Plastic Knob
360210X
"0", 2.1-2.9
360211X
"1", 3.0-4.0
360212X
"2", 4.0-5.5
360213X
"3", 5.5-10.8
Robokim “QC” with Brass Knob
4-011182
"0", 2.1-2.9
4-011181
"1", 3.0-4.0
4-01118
"2", 4.0-5.5
360233X
"3", 5.5-10.8
90 LANDA
Part No.
Part No.
Description
GPM
PSI
3-1203
3-12031
3-12032
Chem, Adj, 190°
Chem, Adj, 190°
Chem, Adj, 190°
5.0-8.0
3.0-5.0
2.0-3.0
3500
3500
3500
INJECTORS
Your One Stop Shop for Parts
Adjustable Quick-Connect Injector
Adjustable Bronze Float Valves
• 3500 psi
• 200°F
360242
360240A
Part No.
GPM
360240
360242
360244
2-3
3-5
5-8
Acid Injectors
360240A
360242A
360244A
080055
080056
•
•
•
•
2-3
3-5
5-8
Injector Repair Kit
Injector Acid Kit
Cast bronze body
Live rubber stopper
Adjustable float arm
180°F
Part No.
Thread
Stem
GPM @ 40 PSI
2-3012
2-3011
2-30110
343306
343307
3/8"
1/2"
3/4"
1"
1-1/4"
1/4" – 20
1/4" – 20
1/4" – 20
1/4" – 20
3/8" – 16
10
17
31
47
80
NOTE: Float valves above require stem & float, below
Repair Parts for Adjustable Valves
076406*
Long Arm
076407*
Short Arm
076408*
Thumb Screw
076411
Thumb Screw (for 1" Valve)
076418
3/8" & 1/2" Plunger
076420
3/4" Plunger
076422
1" Plunger
Series 505 Stainless Steel
& Brass Injectors
All metal parts are stainless steel or brass.
*Fits 3/8", 1/2" & 3/4" Valve Only
•
•
•
•
Part No.
Description
Premier type injector
3200 psi
3/8" inlet/outlet
190°F
GPM
505 Stainless Steel
360505/1.8
SS Injector 1.8
360505/2.1
SS Injector 2.1
360505/2.3
SS Injector 2.3
109234
Repair Kit
Brass
360245
Brass Injector 1.8
360246
Brass Injector 2.1
360247
Brass Injector 2.3
109235
Repair Kit
2.0 – 3.6
2.7 – 4.9
3.3 – 6.0
2.0 – 3.6
2.7 – 4.9
3.3 – 6.0
Exact-A-Flow Pressure
Reducer / Injector
“Low side” chemical injector that regulates inlet pressure to maintain consistent
chemical ratio.
•
•
•
•
Copper & Plastic Float Balls
Up to 6 GPM
1/2" FPT I/O ports
1/4" hose barb chemical inlet
± 2% injection ratio variation
Part No.
Description
385127*
385125
385126**
385128
385129
Weep Seat
Non-Weep
With Switch
Hose Barb with Viton Check
Hose Barb with Buna Check
343318
343319
343325
Part No.
Length
Material
Thread
343326
343317
343318
Plastic
343319
343320
343321
343322
343323
343325
4" x 5"
5"
6"
Copper
Copper
Copper
1/4" – 20
1/4" – 20
1/4" – 20
4-1/2"
5"
6"
6"
8"
4" x 5"
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
1/4" – 20
1/4" – 20
1/4" – 20
5/16" – 18
1/4" – 20
1/4" – 20
Parts for other float valves also available
Stems Only
343310
343310C
Part No.
Length
Material
343310
343310C
343311
343315
343313B
343316
8"
8"
8"
10"
18"
19"
Brass
Brass
Brass
Brass
Brass
Brass
Thread
1/4" – 20
1/4" – 20 x 5/16" – 18
5/16" – 18
1/4" – 20
3/8" – 16
1/2" – 20
Parts for other float valves also available
* Weep Seat allows pump to self-prime
** With burner control switch automatically turns burner off when water flow stops
LANDA 91
INJECTORS & VALVES
Float Valves
Diaphragm Float Valve
• Requires only
6.5" x 3" inside tank
• All plastic snap-on float
• Positive shut off
diaphragm style
• Inlet screen, tank gasket
& nut included
Part No.
Description
Part No.
Description
2-3014
2-30140
Valve, Fluidmaster, 400A, Float
Connector, Fluidmaster Ball Cock
343007
Float Valve Complete
• Rebuildable –
repair parts available
• 3/4" MPT inlet
• 142 psi
• 7.86 GPM @ 28 psi
• 6.68 GPM @ 14 psi
• 140°F
Hudson Float Valve
PA Float Valve
•
•
•
•
•
•
Part No.
Description
2-30121
110250
3/8" Float Valve
Repair Kit
140°F
3/8" MPT inlet
Brass body
Positional/adjustable arm
5 GPM max flow @ 15 psi
7 GPM max flow @ 30 psi
•
•
•
•
No external moving parts
No float ball or arm
Operates between 0-130 psi
All plastic, nylon, rubber
& stainless steel
Part No.
Description
343022
343026
1" Hudson Float Valve, 90°
1" Hudson Float Valve, 150°
•
•
•
•
90°F
1" inlet - easy installation
Automatic anti-siphon
Flow capacity 80% of supply
(40 GPM @ 40 psi)
Back Flow Preventor - Check Valve
Brass Float Valve Assembly
COMPLETE: Valve, Stem & Float
Protects water supply from harmful chemical backflow – will not allow “spike”
pressure to push chemicals into supply line. Now required by many city and
state regulations
• 1/2" FPT inlet
• Brass housing
with polyamide cover
• 4.5 GPM
• 175°F
• 3/4" female garden hose inlet • Machined brass housing
(with lock screw)
• Plastic diaphragm check
• 3/4" male garden hose outlet
Part No.
Description
Part No.
Description
2-30115
085331
343012*
ST-8
Repair Kit
MPT Adapter Kit for ST-8
2-30062
Back Flow Preventor
Check Valves - Swing Action
*Double MPT nipple, sealing washer & lock nut
Retain prime on pumps with low lift capability
Brass Float, Ball & Stem
•
•
•
•
•
•
Part No.
Description
343050
109502
Valve Complete
Repair Kit
92 LANDA
142 psi max inlet pressure
140°F
7.1 GPM @ 28 psi - 1/2" MPT inlet
Positive soft Buna/brass shut-off
Adjustable float ball settings
Inlet nut and washer seal provided
• Brass body with swing
(flapper) action
• 150 psi
Part No.
Description
310862
310863
310864
310865
310866
310868
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
• FPT inlet/outlet
• Gravity seal –
no seal pressure
INJECTORS & VALVES
Your One Stop Shop for Parts
Stainless Steel Check Valves
• Rated pressure:
• 195°F
5800 psi
• Female x Female
• 6500 psi max pressure • 2.0 oz weight
Part No.
Description
310827
310828
1/4" F x F
3/8" F x F
6.5
13.5
2500 or 3000 psi ball check.
Part No.
Holds pump prime without overloading pump suction.
• Designed for harsh
chemical applications
• PVC plastic body
• Stainless steel ball check
GPM Flow Rate
High Pressure Check Valves
310814
PVC Check Valve
Part No.
Description
310834
310835
310837
310838
310844*
1/4" MPT x 1/4" Barb
1/4" Barb x 1/4" MPT
1/4" Barb x 1/4" Barb
3/8" Barb x 3/8" Barb
1/2" Barb x 1/2" Barb
310820
•
•
•
•
Buna seals
Stainless steel check ball
Machined brass body
1 psi cracking pressure
Stainless Steel Ball Valves - 2000 PSI
• Full flow ports
• Investment cast
process
• Two piece 316
Stainless bodies
Description
2500 PSI Miniature Ball Check
310814
1/4", M x F
310815
1/4", M x M
3000 PSI Stainless Guided Ball & Quad Ring Seat
310820
1/4", F x F
310822
3/8", F x F
Part No.
Description
306534
306536
306538
306540
1/4" F x F
3/8" F x F
1/2" F x F
3/4" F x F
•
•
•
•
Allow excellent low-restriction flow in inlet direction and instant
positive check action in reverse direction.
• Machined brass body
• Poppet seal
• Cracking pressure 1 psi
310804
310806
310808
310811
1/4", F x F
3/8", F x F
1/2", F x F
3/4", M x M
• Glass-filled
Teflon® seals
• 180°F @ 2,000 psi
• 300°F @ 1,000 psi
• 350°F @ 300 psi
Forged Brass Ball Valves
Check Valves - 1200 PSI
Description
Cracking press 1 psi
Choice of connects
125 psi
180°F
*310844 has viton seals
310815
Part No.
•
•
•
•
600 psi
180°F Working Temperature
Forged brass body
Full flow ports
MxF
FxF
MxM
Size
306525
306526
306527
306528
306529
306525F
306526F
306527F
306528F
306529F
306525M
306526M
306527M
306528M
306529M
1/4"
3/8"
1/2"
3/4"
1"
Nickel-Plated Brass Ball Valves
Brass Check Valves - Spring-Loaded
•
•
•
•
Holds pump prime without overloading pump suction.
• Machine cast brass
bodies, FPT x FPT
• 150 psi
Part No.
Description
310872
310873
310874
1/2"
3/4"
1"
• 250°F
• Mount horizontal
or vertical
Threaded FPT connects
Chrome-plated ball
Seats & seals have glass-filled Teflon®
Full flow bore
Part No.
Size
PSI
306504
306506
306508
306512
306516
306520
306524
306532
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
710
710
710
570
570
430
430
360
LANDA 93
VALVES
Mini Ball Valves
Brass Mini Ball Valves
• Compact knob operation
• Brass housing-hex bar
• 220 psi working pressure
• Forged brass body
• 600 psi
• 180° handle movement
MxF
FxF
MxM
Size
306350
306352B
306354B
306350F
306352F
306354F
–
306352M
306354M
1/8"
1/4"
3/8"
High Pressure Ball Valves
• Rugged carbon steel
construction
• 2-way
• NPT (F x F) threads
Part No.
FPT
306552
306553
306554
306556
1/4" x 1/4"
3/8" x 3/8"
1/2" x 1/2"
3/4" x 3/4"
• Blow-out proof stems
• Delrin ball seats
• Viton O-rings
306553S
306554S
306556S
306558S
3/8" x 3/8"
1/2" x 1/2"
3/4" x 3/4"
1" x 1"
306542
306544
306546
306548
1/8" x 1/8"
1/4" x 1/4"
3/8" x 3/8"
1/2" x 1/2"
Full port reinforced polypropylene.
•
•
•
•
PSI
7350
7350
7350
5880
• 316 Stainless steel
body, ball & stem
• Viton O-rings
FPT
FPT
Polypropylene Ball Valves
306390
Part No.
Stainless Steel High Pressure
Ball Valves - 5800 PSI
Part No.
Part No.
• Designed to fit tight quarters
• Teflon® seals
• Only 1-3/4" long
• Delron ball seats
• Full Port
PSI
5880
5880
5880
5880
150 psi working pressure
Easy turn with Teflon® seals
Double seal in stem for “no leak”
Threaded mounting bosses, brass
insert on 1-1/4" - 2" sizes
306412
FPT
Two-Way Ball Valves
306390
1/2" x 1/2"
306392
3/4" x 3/4"
306394
1" x 1"
306398
1-1/2" x 1-1/2"
306400
2" x 2"
Three-Way Ball Valves
306408
1/2" x 1/2" x 1/2"
306412
3/4" x 3/4" x 3/4"
306416
1" x 1" x 1"
306420
1-1/4" x 1-1/4" x 1-1/4"
306422
1-1/2" x 1-1/2" x 1-1/2"
306424
2" x 2" x 2"
Compact PVC Ball Valves
Stainless Steel One Piece Ball Valves 800 PSI
• FPT thread both ends
• 150°F
• 150 psi working pressure • EPDM seals - white body
• Easy turn handle
Suitable for steam.
• Standard port
• 316 Stainless
steel body
Part No.
FPT
306582
306583
306584
306585
1/4" x 1/4"
3/8" x 3/8"
1/2" x 1/2"
3/4" x 3/4"
94 LANDA
• 300°F @ 800 psi
• 350°F @ 400 psi
Part No.
FPT
306444
306448
306450
306452
306454
306456
306460
1/4" x 1/4"
1/2" x 1/2"
3/4" x 3/4"
1" x 1"
1-1/4" x 1-1/4"
1-1/2" x 1-1/2"
2" x 2"
VALVES
Your One Stop Shop for Parts
PVC Ball Valves
Flow Control Metering Valve
Great for chemical On/Off flow control.
The Valve that “Seals” (will not suck air).
•
•
•
•
•
Part No.
Description
306352P
306354P
306356
306358
1/4" Panel Mtg - Barb x Barb
1/4" Inline - Barb x Barb
3/8" Inline - Barb x Barb
1/2" Inline - Barb x Barb
•
•
•
•
•
Description
306331
1/4" M x F x F
Part No.
Description
371120X
371120P
Metering Valve / Alum Knob
Metering Valve / Poly Knob
• Heavy-duty brass bar
stock body
• 195°F rated temperature
• Panel mounts 5/8" hole
• Large easy-grip
four-lobe handwheel
• Aluminum
or Poly available
Brass Metering Valve
3-Way Ball Valve
Part No.
• 3500 psi to 28" vacuum
– No leak
• Viton gland seal
isolates metering
threads from solution
• Stainless steel needle/
brass seat
• 1/4" FPT ports
PVC & nitrile material
Chemical & impact resistant
Flag handle
180°F
125 psi
• Easy grip, fluted plastic
handle with pointer
• Brass body, Viton gland
seal eliminates air leaks
• Panel mount 11/16"
or 3/4" hole
400 psi
180°F
Teflon seat
Buna seals
Brass
Part No.
Description
371115
371116
“T” 1/4 F x F - Forged
“L” 1/4 M x M - Machined
• Extremely compact
T-style
• 1/4 inlet/outlet
• 450 psi
• 170°F
Flow Selector Valve
Chemical Metering Valves / On-Off Valve
3-way & 4-way lever control with brass body
• 4-way
Plumb for 3 inlets & 1 outlet
or 1 inlet & 3 outlets
• 3-way
Plumb for 2 inlets & 1 outlet
or 1 inlet & 2 outlets
371100
Part No.
Description
343734
343736
343744
343746
1/4" FPT 3-Way
3/8" FPT 3-Way
1/4" FPT 4-Way
3/8" FPT 4-Way
Flow Control Metering Valve
•
•
•
•
•
•
Part No.
Description
371125
371133
1/4", FPT In/out
3/8", FPT In/out
2-30158
• Dual knob control – calibrate chemical
flow withbase knob. Outside knob
allows on/off control without changing
calibration
Forged brass, nickel-plated body
Panel mtg in 17/32" hole
Compact size
Double stem seal
300 psi
175°F rated temperature
Part No.
Description
371100
2-30158
2-3028
MV-100
MV-150
MV-250 with Locknut
2-3028
• Single (1/2") hole panel mounting
• Brass & stainless steel materials
ST-66 Chemical Meter
& Selection Valve
• Two input barbs – for different chemicals
to single outlet barb
• Double metering dial with center OFF
• Panel mount in single 5/8" hole
Part No.
Description
371166
ST-66
LANDA 95
VALVES
GP Chemical Metering Valves
•
•
•
•
2-3015
Adjusts from off to full flow
4000 psi
6 GPM
2-30151 has presettable
limiting orifice
Steam Valve
For “Combo” Hot Pressure Washer/Steamer Units. The single turn on/off
diverter valve by-passes pump flow to reduce water flow to the coil, creating
steam in place of normal hot water.
• Panel mount in 11/16"
or 3/4" hole
• Machined brass body
• Easy-grip plastic knob
2-30151
Part No.
Description
2-3015
2-30151
Flow Control
Flow Control with Locking Adjustment
Thermal Relief Valves
A MUST for any pump that might ever be left in bypass mode (unloading)
for more than 15 seconds! Protects the pump from overheating caused by
recirculating water.
•
•
•
•
•
•
•
Installs in by-pass line
Automotive style wax element
Automatically resets at cool down to 115°+ F
No adjustment required
1/8" FPT side discharge
125 psi inlet pressure
2.5 GPM flow
Part No.
Inlet
“Trip” Temp
458000
458001
458002
458005
458007
1/4" MPT
3/8" MPT
3/8" MPT
1/2" MPT
1/2" MPT
140°F
140°F
170°F
140°F
170°F
Compact Thermal Relief Valves
Part No.
Orifice (mm)
400008
400012
400015
400018
400020
0.8
1.2
1.5
1.8
2.0
• 3600 psi
• 175°F
• 1/4" MPT inlet/outlet
TRV Thermal Relief Valves
Low Profile!
• Brass body
• Plastic covered barb
• 7mm Hose barb
Part No.
Inlet
458030
458032
458034
1/4"
3/8"
1/2"
• 145 psi
• Opens at 145°
Safety Pressure Relief Valves
• 145°F “Trip” temperature
Part No.
Inlet
“Trip” Temp
458024
2-300816
2-30082
2-3008150
1/4" MPT
3/8" MPT
1/2" MPT
1/2" MPT
145°F
145°F
145°F
190°F
96 LANDA
• Prevents pressure overloads,
protecting people and equipment
• Machined brass
• Automatically resets
• 3/8" MPT
Part No.
Max PSI
Size
81-22550
81-22560
81-22565
2-3245
1200 (Silver Spring)
2400 (Red Spring)
3600 (Orange Spring)
5000 PSI
1/4"
1/4"
1/4"
3/8"
VALVES
Your One Stop Shop for Parts
Rupture Disks
E-Z Start Valve
• Prevents dangerous thermal expansion
of water in the coil
• Ensures operator safety
Relieves pump head pressure during engine/motor starting, seals when
full system flow is reached, saving battery and arm power. Cuts Amp draw
on electric motors.
• 1/4" or 3/8" MPT inlet
• 1/8" FPT outlet
• 8 GPM
Part No.
Description
2-3409
Assembly, 7000 psi
Part No.
Description
2-3100543
2-3100544
1/4" MPT x 1/8" FPT
3/8" MPT x 1/8" FPT
• Stainless steel spring
and ball
• 5000 psi
Air Valve - Coil Blow Out
Install in front of coil and use air pressure to blow water out of coil
to prevent “Freeze Up”.
•
•
•
•
2-3013
Threaded connection
1/8" model is stainless steel
1/4" brass valve
Valve cap included
2-30131
Part No.
Description
2-30131
2-30132
2-3013
140073
140075
Valve Assy, fits Garden Hose Inlet Swivel
Valve Assy, fits Water Tanks
Air Valve Stem Only, 1/8"
1/8" Stainless Steel Connect
1/4" Connect
Easy Start Valve
Relieves pump head pressure during engine/motor starting, seals when full
system flow is reached, saving battery & arm power. Cuts Amp draw on electric
motors startup.
• 3/8" MPT inlet
• 1/8" FPT outlet
• Machined
brass housing
Part No.
Description
339004
339005
140350
Easy Start Valve, 4100 psi
Easy Start Valve, 3500 psi
Hose Barb, 1/8 x 1/4 barb
Relieves pump head pressure during engine/motor starting, seals when
full system flow is reached, saving battery & arm power. Cuts Amp draw
on electric motors startup.
•
•
•
•
INLINE – Garden Hose Connect
Part No.
Discharge
Outlet
385130
2-3010
385133
385134
20 psi
20 psi
30 psi
40-50 psi
1/2" FPT
3/4" MGH
3/4" MGH
3/4" MGH
Hose barb outlet
Stainless steel internal
8 GPM
200°F
Easy Start Valve
Pressure Reducing Valve
• 200 psi max inlet
pressure (See discharge
pressures, below)
• Protects pumps from
supply pressure surges
•
•
•
•
• Improves efficiency
of float valves
• Brass construction
• 3/4" female garden hose
inlet (See outlets, below)
3/8" MPT inlet
Hose barb outlet (8 mm)
Machined brass body
Stainless steel spring & ball
Part No.
Description
339006
Easy Start Valve
• 7.8 GPM
• 3200 psi
• 176°F
Speedmaster Throttle Control
Stop overworking the engine and pump during bypass. Decelerator reduces
engine speed when pump head pressure drops below 215 psi, reduces flow
during bypass, slows recirculation heat buildup.
• 3500 psi
• 300°F
• A major system saver
for gas engine units
• Machined brass body
• Stainless steel
gland components
Part No.
Description
339000A
Throttle Control
• 1/4" male connect
• Viton seals
• 42" lined and covered
control cable
• Engine speeds infinitely
adjustable for “Fine Tuned”
system performance
LANDA 97
VALVES & GAUGES
Stainless Steel Pressure Gauges
AISI 304 stainless steel case
Bronze Bourdon tube
99.5% pure glycerin filled
PSI & Bar dual scale
1/4" NPT brass mounting stem
Convex magnifying lens
for easy reading
• Steel needle & peg
• Accuracy ± 1.5%
Corrosion-Resistant ABS Gauge
•
•
•
•
•
•
Part No.
Pressure Range
2-1/2" Bottom Mount with Bronze Internals
348216
0-100 psi
348220
0-200 psi
348224
0-300 psi
348230
0-500 psi
348240
0-1000 psi
348245
0-2000 psi
348250
0-3000 psi
348255
0-4000 psi
348260
0-5000 psi
348262
0-6000 psi
348265
0-10,000 psi
2-1/2" Back Mount with Bronze Internals
348125
30Hg - 0 Vacuum
348140
0-100 psi
348150
0-500 psi
348152
0-1000 psi
348154
0-2000 psi
348156
0-3000 psi
348158
0-4000 psi
348160
0-5000 psi
348162
0-6000 psi
348165
0-10,000 psi
Mounting Hardware for Back Mount Gauges
348001
U-bracket
348090*
3-hole flange, mounted
• Acid & alkali proof
plastic case
• Bronze bourdon tube
Part No.
Pressure Range
348305
348307
348308
348312
348313
348314
348316
0-100 psi
0-200 psi
0-300 psi
0-1000 psi
0-2000 psi
0-3000 psi
0-5000 psi
Fuel Oil Pressure Gauge
• 0-200 psi
• Perfect for testing burner pump fuel pressure
Part No.
Pressure Range
079020
0 - 200 psi
AMP Meters
• Designed for OEM or replacement
• Utilize as constant monitor
or as test instruments
• Accuracy to ± 5%
• Rugged & weather-resistant
• Bright stainless bezel
• Metal case
• Fits 2-1/16" mounting hole
*must be factory mounted
Steel Utility Gauges
Dry Gauges!
• Black lacquered
steel case
• Bronze bourdon tube
• Dry gauge
Part No.
2" bottom mount
348552
348554
348558
348560
98 LANDA
• 1/4" NPT brass
mounting stem
• Accuracy ± 3-2-3%
Part No.
Range
091321
091323
091344
-15 to +15 Amps
-20 to +20 Amps
-60 to +60 Amps
*Requires 2-1/8" hole
Hour Meters for Gasoline Engines
•
•
•
•
Pressure Range
0-60 psi
0-100 psi
0-200 psi
0-300 psi
• 1/4" NPT brass
mounting stem
• Accuracy Dry: ±3-2-3%
Filled: ±1.5%
Elapsed time
Made in U.S.A.
No battery required
Digital quartz accuracy
(± .02%)
Part No.
Description
358460
358464
358466
For Recoil Start / 4-40 VDC
For Electric Start / 4-40 VDC
Minitach/ Hourmeter
• Extremely rugged
& tamperproof
• Sealed from dirt & moisture
• Requires 2" panel cutout
VALVES & GAUGES
Your One Stop Shop for Parts
Hour Meter
Pressure & Temperature Test Set
• Elapsed time
• Extremely rugged and tamperproof
• Sealed from dirt and moisture
4-050822
4-050823
Part No.
Description
4-050822
4-050823
4-0508
110V/230V
12V
VDO, 12VDC,
Round, old style
Tachometer/Hour Meter
12VDC
4-050820
Voltmeter
• Monitor alternators/generators
• Everclear glass lens
• Versatile — use as TEST instruments
or mount permanently on or near engine —
accurate to within 10% of full scale
Convenient test set provides both pressure and temperature check with one easy
quick coupled connection at outlet of unloader or coil.
• Test Set 5000
500°F Thermometer
5000 psi pressure gauge
for systems up to 2000 psi
• Test Set 8000
500°F Thermometer
8000 psi pressure gauge
for systems up to 4000 psi
• Test Set 10,000
10,000 psi pressure gauge
for systems up to 5000 psi
4-0600
4-0601
Part No.
Description
4-0601
449048
449040
4-0600
Test Set 5000 (0-2500 psi systems)
Test Set 8000 (0-4000 psi systems)
Test Set 10,000 (0-5000 psi systems)
Pressure Gauge Assy (0-5000 psi)
Flow Meters
The answer to precision calibration and efficient operation
of pressure washing systems.
Part No.
Description
4-0507
120 VAC SGHW, SDHW
• Flow scale measures Gallons
Per Hour (GPH)
• 100 psi
• 150°F
• 1/8" FPT inlet & outlet port
• Wetted parts are brass
or stainless steel, with or
without metering values
Temperature Gauges
(Dial Thermometers)
• 3" diameter dial –
stainless steel case
• Shatter-resistant
polycarbonate lens
• Stainless steel stem (2.5")
Part No.
Description
426410
Temp Gauge +50° to 500°F
• 1/2" MPT connector
• Accuracy to within 3%
of dial range
(ie. 50 - 500 = ± 6.8°F)
NOTE: “Thermowell” to be used with dial thermometers in systems over 300 PSI. For best results fill
thermowell with liquid silicon or glycol to increase sensitivity and accuracy of readings.
Thermowell for temperature gauge above
• Brass
3/4" MPT x 1/2" FPT
• Gives 2000 psi
collapse protection
Part No.
Description
426423
Thermowell for 426410 above
• 1.75" immersion length
• Accurate within ±5%
• Precision cut and machined
clear acrylic
• Metal mounting inserts
for ease of installation
(10-32 threads)
• Compact size – 2" tall scale,
4-3/32" overall height
Part No.
GPH
Metal
Metering Valve
343722
343723
343726
343727
343724
343725
343728
343729
.6 – 5
.6 – 5
2 – 10
2 – 10
.6 – 5
.6 – 5
2 – 10
2 – 10
Brass
Brass
Brass
Brass
SS
SS
SS
SS
no
yes
no
yes
no
yes
no
yes
NOTE: All flow measurements must be on Low Pressure side of pump.
LANDA 99
ENGINES & MOTORS
Honda Engine Parts
Original Honda replacement parts from the factory. Filters are a great add-on to every service order.
77-310
77-500
77-331
77-330
• Authorized manufacturer replacement parts
• Don’t settle for cheap imitations
Part No.
Description
Engine Model No.
77-100
77-300
77-310
77-320
77-331
77-330
77-500
77-VHRM1
77-VHLM1
77-VHLM4
77-VHRM4
Spark Plug
Air Filter
Air Filter, Dual
Air Filter
Air Filter
Air Filter
Oil Filter
Muffler
Muffler
Muffler, Honda
Muffler, Honda, Right
All GX models
GX140, GX200
GX240, GX270
GX340, GX390
GX610, GX620, new style
GX610, GX620, old style
GX610, GX620
620K Version, 20 hp, MHP, old style
620K Version, 20 hp, PG/PGHW, old style
GX620/GX670 for K-1 Eng, SkidsPG
GX620/GX670 for K-1 Eng, MHP/MVP/MPG
Kohler Engine Parts
Genuine Kohler replacement parts.
• Authorized manufacture replacement parts
73-1213202
• Don’t settle for cheap imitations
Part No.
Description
Engine Model
73-2408303
73-2404102
73-2478612
73-1205001
73-2408302
73-1213202
73-4834001
Air Filter
Gasket, Exhaust Muffler
Muffler
Oil Filter
Pre-Filter, Air
Spark Plug
Key, Ignition
Kohler 25 hp
Kohler 25 hp
Kohler 25 hp
Kohler 25 hp
Kohler 25 hp
Kohler 25 hp
Kohler 25 hp
73-1205001
73-2408303
100 LANDA
ENGINES & MOTORS
GAUGES
Your One Stop Shop for Parts
Briggs & Stratton Engines - Gasoline
Briggs & Stratton’s top-of-the-line engines have proven performance
in the pressure washer industry.
• Easy, quick starting
• Large fuel tank
• Super quiet muffler
• OilGuard® low-oil shutdown
Part No.
HP
Shaft Diameter
Starter
Charge Rate
Fuel Tank
Model No.
5-0306
5-0309
5-0317
5-0316
16
16
16
21
1"
1"
1"
1"
Recoil
Electric
Electric
Electric
N/A
20 Amp
20 Amp
N/A
2.25 gal
N/A
2.25 gal
N/A
Vanguard
Vanguard
Vanguard
Vanguard
NOTE: Mufflers for the above engine are sold separately. See Briggs & Stratton Engine Parts section below.
VANGUARD, V-TWIN OHV
Power to complete any job quicker and easier with less wear and tear
on major engine components.
• State-of-the-art carburetion system
• 30% quieter muffler than competition
Part No.
HP
Shaft Diameter
5-0300
5-0313
5-0314
339405
6
11
13
5.5
3/4"
1"
1"
• Cast/sintered iron sleeve
• OilGuard® low-oil shutdown
Starter
Charge Rate
Recoil
N/A
Recoil
N/A
Recoil
N/A
One Pull Starting
Fuel Tank
Model No.
1 gal
2 gal
2 gal
Vanguard
Vanguard
Vanguard
Intek-Pro
OHV VANGUARD
Briggs & Stratton Engine Parts Selection Chart
Use the selection chart below to find the correct part for the specific Briggs & Stratton model.
Description
Oil Filter
Air Filter
Air Pre-Filter
Fuel Filter
Spark Plug
Engine Model No.
Vanguard, 6 hp
Vanguard, 9 hp
Vanguard, 16 hp with Fuel Tank, Pull/Start
Vanguard, 16 hp ES, 20 Amp
Vanguard, 11 hp
Vanguard, 13 hp
Vanguard, 21 hp ES
Vanguard, 16 hp ES with Fuel Tank
n/a
n/a
76-491056
76-491056
n/a
n/a
76-492932S
76-491056
76-491588S
76-710266
76-394018S
76-393957
76-710266
76-710266
76-692519
76-394018S
76-491435S
76-710268
76-272490S
76-272490S
76-210268
76-210268
76-692520
76-272490S
2-9903
2-9903
76-394358
76-394358
2-9903
2-9903
76-691035
76-691035
76-491055
76-491055
76-491055
76-491055
76-491055
76-491055
76-491055
76-491055
117432-0236-E1
185432-0235-E1
303442-1027-E1
303447-1110-E1
235432-0235-E1
245432-0235-E1
381447-0253-E1
303447-1306-E1
Briggs & Stratton Engine Parts
Genuine Briggs & Stratton replacement parts are available from LANDA. Please provide engine
model/type/code to assure proper fit of replacement parts or see above selection chart above.
• Authorized manufacturer replacement parts
76-491055
76-49491056
• Don’t settle for cheap imitations
Part No.
Description
Part No.
Description
76-491056
76-491588
76-394018S
76-393957
76-272490S
76-394358
76-491055
Oil Filter
Air Filter
Air Filter
Air Filter
Air Pre-Filter
Fuel Filter
Spark Plug
76-807964
Muffler, Exhaust
16 HP Vanguard
Muffler, Exhaust
16 HP Vanguard, Hi-Right
Muffler, Exhaust
21 HP
76-807965
76-808597
76-394018S
LANDA 101
ENGINES & MOTORS
Robin-Subaru Engine - Gasoline
Part No.
Description
HP
Model No.
5-0003
5-0004
Manual Start, 200 Watt Charging System
Manual Start, 200 Watt Charging System
6.0
7.0
EX17
EX21
Lombardini Engines - Diesel
Lombardini Water Cooled Diesel Engines provide superior power and quiet operation.
• Diesel powered
• Water cooled
Part No.
HP
Shaft Diameter
Starter
Charge Rate
5-0405
5-0407
15
26
1-1/2"
1-1/2"
Electric
Electric
N/A
N/A
Fuel Tank
Model No.
No
No
LDW602, Water Cooled
LDW903, Water Cooled
Lombardini Engine Parts
Factory direct Lombardini parts from Italy. Many parts stocked at LANDA.
• Authorized manufacturer replacement parts
74-2175107
74-2175164
Part No.
Description
Engine Model
74-2175107
74-2175164
74-2175045
Oil Filter
Air Filter
Fuel Filter
LDW602/903
LDW602/903
LDW602/903
12 VDC Starter Solenoid
Keyed Ignition Switch - 12 VDC
•
•
•
•
•
•
Universal type used on many lawn and garden tractors and mowers.
• Double terminal – 5/16" - 24 studs
• Same as used on 16 HP
B & S Vanguard engines
• Rated for intermittent duty
(i.e. for starting small gasoline engines)
Part No.
Description
091357
12V DC Starter
102 LANDA
Universal style/5 pole
Off-On-Start (spring back to On)
Panel nut and star-lock washer
Two keys included
Has two auxiliary circuits
Universal - used for small engine controls
on many lawn and garden tractors, mowers
Part No.
Description
6-0206
091351
Keyed Ignition Switch, 5 pole
Keyed Ignition Switch, 6 pole
ENGINES & MOTORS
Your One Stop Shop for Parts
Baldor Motors - Open Drip Proof (ODP)
Industrial grade motors built specifically to meet or exceed the demands of the pressure
washer industry.
• The industry standard
• U.L. Listed
1 PHASE
56 FRAME
1 PHASE
184T FRAME
3 PHASE
184T FRAME
• Any Baldor motor available
Part No.
HP
Phase
Voltage
RPM
Frame
Model
5-1044
5-1046
5-1046E*
5-1047
5-1043
5-1071
5-1047E*
5-1048
5-10081
5-1053
5-1053E*
5-10104
5-10401
5-1011
5-1013
5-10145
5-1080
5-1081
5-1082
5-1083
5-1016
5-1018
5-1025
1.5
1.5
1.5
2.0
2.0
2.0
2.0
3.0
3.0
5.0
5.0
5.0
6.2
6.2
7.5
7.5
8.2
8.2
8.2
8.2
10.0
10.0
15.0
1PH
1PH
1PH
1PH
1PH
1PH
1PH
1PH
1PH
1PH
1PH
1PH
1PH
3PH
1PH
3PH
1PH
3PH
1PH
3PH
1PH
3PH
3PH
115/230V
115V
115V
115/230V
115/230V
115V
115/230V
230V
208/230V
208/230V
208/230V
230V
230V
208/230/460V
230V
230/460V
208V
208V
230V
230/460V
230V
230/460V
230/460V
3450
3450
3450
3450
3450
1725
3450
3450
1725
3450
3450
1725
1725
1725
1725
1725
1725
1725
1725
1725
1725
1725
1725
56
56C
56C
56C
56H
56
56C
56C
56HC
56CZ
56CZ
184TCZ
184TZ
184T
215T
213T
215
215
215
215
215T
215T
254T
34F171W448
17E072W505
34F316W448S2
35R613R717G1
35K263Y685
35Q371R021G1
35K894Y685
35R613Y771G1
35M895T356
35R606R761G1
35L358S214
36G472W849
36J185X288G1
36B101Y483H2
L1510T
M3311T
N/A
N/A
N/A
N/A
L1512T
M3313T
M2513T
*Replacement for old style LANDA “HOT” units, these have the capacitors on the side.
Baldor Motors - Totally Enclosed Fan Cooled (TEFC)
Totally enclosed for special applications
• The industry standard
• U.L. Listed
1 PHASE
• Any Baldor motors available
Part No.
HP
Phase
Voltage
RPM
Frame
Model
5-1006
5-1074
5-1070
1.5
2.0
4.0
1PH
1PH
1PH
115/208/230V
115/208/230V
230V
1725
1725
1725
56
56H
56H
35E770S728G3
35N486S301G1
35Q988R447G1
NOTE: Any Baldor TEFC motor can be ordered.
LANDA
103
ENGINES & MOTORS
Baldor Motors - C-Face Open Drip Proof (ODP)
Built to “Industrial” Specifications. “S” Indicates Motor Has On/Off Switch.“B” Indicates Motor
is black.
Part No.
HP/S
Single Phase
337255
3/4
337302
1.5
337304
1.5
337232B
1.5S
337234B
1.5S
337311
2.0
337313
2.0
337240B
2.0S
337242B
2.0S
337321
3.0
337323B
3.0
337263B
3.0S
337264B
3.0
337265B
3.0S
337266B
3.0S
337267B
4.0
337268B
4.0
337269B
4.0
337271B
5.0
337272B
5.0
337273B
6.0
337275B
7.5
Three Phase Motors
337520
3.0
337530
5.0
337535
7.5
337536
7.5
337542
10.0
RPM
Shaft Dia
Bolt Circle
Frame/C-Face
Amps
Voltage
1725
1725
3450
1725
3450
1725
3450
1725
3450
1725
3450
3450
1725
1725
1725
1725
1725
3450
1725
3450
1725
1725
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
1-1/8"
5/8"
5/8"
5/8"
5/8"
1-1/8"
1-1/8"
5/8"
5/8"
1-1/8"
5/8"
1-1/8"
1-1/8"
5 7/8"
5-7/8"
5-7/8"
5-7/8"
5-7/8"
5-7/8"
5-7/8"
5-7/8"
5-7/8"
7-1/4"
5-7/8"
5-7/8"
5-7/8"
5-7/8"
7-1/4"
7-1/4"
5-7/8"
5-7/8"
7-1/4"
5-7/8"
7-1/4"
7-1/4"
56/56C
56/56C
56/56C
56/56C
56/56C
56/56C
56/56C
56/56C
56/56C
184TC
56/56C
56/56C
184CZ/56C
184CZ/56C
184TC
184TC
182TCZ/56C
56/56C
184TC
56HCY/56C
213C/182TC
215C/182TC
10.2/5.4/5.1
14/7
13.2/6.6
14/7
13.2/6.6
18.4/9.2
17.6/8.8
18.4/9.2
17.6/8.8
32/16
13.7/12.5
13.7/12.5
32/16
32/16
32/16
17.5/16
17.5/16
38/21/19
25/23
24/23
26
36/33
115/208/230
115/230
115/230
115/230
115/230
115/230
115/230
115/230
115/230
115/230
208/230
208/230
115/230
115/230
115/230
208/230
208/230
115/208/230
208/230
208/230
230
208/230
1725
1725
1725
1725
1725
1-1/8"
1-1/8"
1-3/8"
1-1/8"
1-1/8"
7-1/4"
7-1/4"
7-1/4"
7-1/4"
7-1/4"
182TC
184TC
215TC
215TCZ/184TC
215CZ
8.6/8.2/4.2
14.8/14.7/7.4
23/22/11
23/22/11
30/28/14
208/230/460
208/230/460
208/230/460
208/230/460
208/230/460
NOTE: Amp draw ratings require adequate wire size and full voltage to apply. Full load Amp ratings apply only when full rated voltage
and properly sized wiring is used to supply power to motor.
Baldor Motors - Rigid Base Open Drip Proof (ODP)
Part No.
Single Phase
337301
337312
337310
337320
337331
337329
337279
3 PHASE
184T FRAME
HP/S
RPM
Shaft Dia
Motor Frame
Amps
Voltage
1.5
2.0
2.0
3.0
5.0
5.0
7.5
1725
3450
1725
1725
3450
1725
1725
5/8"
5/8"
5/8"
1-1/8"
5/8"
1-1/8"
1-3/8"
56
56
56
184T
56
184T
215T
14/7
17/8.8
18.4/9.2
32/16
23-21
25/23
3-31
115/230
115/230
115/230
115/230
208/230
208/230
208-230
1725
1725
1725
1760
1-1/8"
1-3/8"
1-3/8"
1-5/8"
184T
213T
215T
254T
14.8/14.7/7.4
23/22.5/11.3
30/28/14
40.9/39/19.5
208/230/460
208/230/460
208/230/460
208/230/460
Three Phase Motors
337529
5.0
337534
7.5
337540
10.0
337545
15.0
NOTE: Amp draw ratings require adequate wire size and full voltage to apply. Full load Amp ratings apply only when full rated.
104 LANDA
ENGINES & MOTORS
Your One Stop Shop for Parts
Baldor Motors - Totally Enclosed Fan Cooled (TEFC)
Featuring heavy gauge steel frames, ball bearings, welded base and “snap-action” starting
for reliability. Built to industrial specifications.
Part No.
HP
RPM
Shaft Dia
Bolt Circle
Frame/C-Face
Amps
Voltage
1725
1725
3450
3450
3450
1725
1725
3450
3450
1725
1725
3450
3450
1725
1800
3450
1725
5/8"
5/8"
5/8"
5/8"
5/8"
7/8"
1-1/8"
5/8"
5/8"
1-1/8"
1-1/8"
1-1/8"
1-1/8"
1-3/8"
1-1/8"
1-3/8"
1-3/8"
None
5-7/8"
5 7/8"
5-7/8"
None
5-7/8"
None
None
5-7/8"
None
7-1/4"
None
7-1/4"
None
7-1/4"
None
None
56
56C
56C
56C
56
145TC
184T
56
56C
184T
184TC
184T
184TC
215T
215C
213T
215T
12/6
12/6
13.2/6.6
17/8.5
17/8.5
8.3
13.2
12.5
13.8-12.5
23
23
19.5
19.5
29-32
34.1-30.8
30-33
40
115/230
115/230
115/230
115/230
115/230
230 only
230
230
208-230
230
230
230
230
208-230
208-230
208-230
230
Three Phase Motors
337519
3.0 1725
337334
5.0 1725
337333
5.0 1725
337537
7.5 1725
337276
7.5 1725
337385
7.5 3450
337544
10.0 1725
337396
10.0 3450
1-1/8"
1-1/8"
1-1/8"
1-3/8"
1-3/8"
1-1/8"
1-3/8"
1-3/8"
7-1/4"
None
7-1/4"
None
7-1/4"
None
None
None
182TC
184T
184TC
213T
213TC
184T
215T
215T
9.1-8.2/4.1
14.6-13.2/6.6
14.6-13.2/6.6
22.1-20/10
22.1-20/10
19-17.2/8.6
29-26/13
26.6-24/12
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
Single Phase
337351
1.5
337352
1.5
337354
1.5
337363
2.0
337362
2.0
337361
2.0
337370
3.0
337373
3.0
337374
3.0
337379
5.0
337380
5.0
337376
5.0
337377
5.0
337383
7.5
337280
7.5
337384
7.5
337393
10.0
NOTE: Some of these motors will require two days from order to shipping.
A.O. Smith - Pressure Washer Motors
Excellent power efficiency. “S” indicates Motor has On/Off switch.
Motor
HP/S*
RPM
Shaft
Dia
Bolt
Circle
Frame/
C-Face
Full Load
Amps
Voltage
337413
337414S
337423
337424S
337432
337438
2.0
2.0
3.0
3.0
5.0
6.0
3450
3450
3450
3450
3450
3450
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5-7/8"
5 7/8"
5-7/8"
5-7/8"
5-7/8"
5-7/8"
56C/56C
56C/56C
56C/56C
56C/56C
56C/56C
56C/56C
17.2/9.2/8.6
17.2/9.2/8.6
13.5
13.5
22.0
22.0
115/208/230
115/208/230
208/230
208/230
208/230
208/230
TEFC Motor
337407T
1.5
1750
5/8"
5-7/8"
56C/56C
15.0/7.5
115/230
Part No.
LANDA
105
ENGINES & MOTORS
Small Engine Test Equipment
Spark Tester
Compression Tester
• Handy tool allows safe, easy visual
inspection of ignition output
• Connects BETWEEN plug & plug wire
• Totally contained spark
• Engine will run with tester attached
• Neon test light verifies proper ignition
Wireless Tachometer
• Terrific service aid for
1-cylinder engines
• Just hold built-in antenna near
spark plug
• Excellent for setting GPM
on pressure washers; accuracy
within 2% of full scale
• Two scales: 0-5000 RPM
or 0-15,000 RPM
• Solid state electronics
• Requires 9 volt battery
(not included)
• Designed for small engines
• 2-1/2" dial reads up to 300 psi
• 12" flexible hose to reach
spark plug holes
• Adapters for 14mm and 18mm
spark plug holes
• Built-in pressure holding/ release valves
Part No.
Description
Part No.
Description
Part No.
Description
091126
Spark Tester
091133
Comp Tester
091132
Wireless Tach
Couplers Built by Browning or Lovejoy
Reference / Calculation Guide
Listed as individual coupler sections (half) to allow flexibility in design.
For complete coupler select:
Bore size for motor + Bore size for pump + Spider = Complete Coupler
Conversion Factors
NOTE: Select halves from same series as listed in groups
below (i.e. All “090/095”, “099/100”)
1 inch = 25.4 mm
1 gal H20 = 8.33 lbs
1 gal = 3.79 liter
1 kg = 2.205 lbs
1 cm = 0.394 inch
1 oz = 23.35 gram
1 liter = 0.2642 gal
1 KW = 1.341 HP
Horsepower (HP) Equations
HP =
GPM x PSI
1460
PSI =
HP x 1460
GPM
GPM =
HP x 1460
PSI
Pulley Equations
Pump Pulley Diameter x Pump RPM = Manufacturer Pulley Diameter x Manufacturer RPM
Part No.
Description
Bore
090/095 SERIES: Up to 3 HP Electric or 4 HP Gas
336031
336050
336044
336045
336049
Coupler Half
Coupler Half
Coupler Half
Coupler Half
Buna Spider for 090 (STD)
24 mm
5/8" (090)
3/4" (090)
15/16" (090)
099/100 SERIES: Up to 5-7 1/2 HP Electric or 5-13 HP Gas
336038
336048
336037
336039
336039A
336040
336042A
336047
336043
106 LANDA
Coupler Half
Coupler Half
Coupler Half
Coupler Half
Coupler Half
Coupler Half
Coupler Half
Coupler Half
Buna Spider for 099/100 (STD)
3/4" (100)
15/16" (099)
20 mm (100)
24 mm (099)
24 mm (100)
1" (100)
1-1/8" (100)
1-3/8" (100)
Questions and Answers
Q: How fast do I turn my pump to give me a desired GPM?
A: Required RPM = (desired GPM x Rated RPM)
Rated GPM
Q: What size pump pulley do I use to get a certain RPM?
A: Pump Pulley Diameter = Motor Pulley Diameter x Motor RPM
Pump RPM
ENGINES & MOTORS
Your One Stop Shop for Parts
Belts
• Full line of belts
• "V" notched for longer life
and better performance
• For all LANDA machines
Bushings
• Split taper,
malleable iron
• Keyed to both shaft
and hub
• Highest torque
carrying capacity
Part No.
Size
5-602026
5-602029
5-602031
5-602033
5-602034
5-602037
5-602040
5-602041
5-602035
5-602036
5-602038
5-602042
AX26
AX29
AX31
AX33
AX34
AX37
AX40
AX41
AX35
AX36
AX38
AX42
5-604022
5-604032
5-604034
5-604035
5-604036
5-604037
5-604038
5-604040
5-604042
5-604044
5-604046
5-604048
5-604051
BX22
BX32
BX34
BX35
BX36
BX37
BX38
BX40
BX42
BX44
BX46
BX48
BX51
Part No.
Description
5-511063
5-511075
5-511088
5-511100
5-511113
5-511138
5-511139
5-522138
5-522158
5-531112
5-531144
5-512020
5-512022
5-512024
5-512025
376332
376335
H x 5/8
H x 3/4
H x 7/8
Hx1
H x 1-1/8
H x 1-3/8
H x 1-3/8-6B, Spline
P1 x 1-3/8 x 5/16
P1 x 1-5/8
P2 x 1
P2 x 1-7/16
H x 20MM
H x 22MM
H x 24MM
H x 25MM
H x 32MM
H x 35MM
Pulleys
• High quality
cast iron pulleys
• Cast design
• All sizes available
AK pulley
2AK pulley
BK pulley
XD3047, XD3055 and XD3065.
• Double groove
• 24mm bore
• 2 x A groove
Part No.
OD
376304
376305
376306
4.0"
5.5"
6.3"
Size
OD
5-40102158*
5-40102358*
5-40102558*
5-40102858*
5-40103001
5-40103201
5-40103401
5-40103901
5-40107401
5-40108401
5-40108901
AK21
AK23
AK25
AK28
AK30H
AK32H
AK34H
AK39H
AK74H
AK84H
AK89H
2.10"
2.30"
2.50"
2.80"
3.05"
3.25"
3.45"
3.75"
7.25"
8.25"
8.75"
5-40203001
5-40203201
5-40203401
5-40204901
5-40205101
5-40205401
5-40206401
5-40207401
5-40208401
5-40209401
2AK30H
2AK32H
2AK34H
2AK49H
2AK51H
2AK54H
2AK64H
2AK74H
2AK84H
2AK94H
3.05"
3.25"
3.45"
4.75"
4.95"
5.25"
6.25"
7.25"
8.25"
9.25"
5-40403001
5-40403201
5-40403401
5-40403601
5-40404001
372586
372596T
372650T
5-40405701
5-40406001
372704T
5-40406501
5-40407001
5-40407501
5-40408001
5-40408501
372799T
BK30H
BK32H
BK34H
BK36H
BK40H
BK45H
BK47H
BK52H
BK57H
BK60H
BK62H
BK65H
BK70H
BK75H
BK80H
BK85H
BK100H
3.30"
3.35"
3.55"
3.75"
3.95"
4.25"
4.45"
4.95"
5.45"
5.75"
5.95"
6.25"
6.75"
7.25"
7.75"
8.25"
9.75"
5-40503201
5-40503401
5-40503601
5-40504001
5-40504501
5-40504701
5-40505201
5-40506001
5-40506201
5-40507001
5-40505001
5-40506501
5-40506701
5-40508001
5-40509001
5-40510001
2BK32H
2BK34H
2BK36H
2BK40H
2BK45H
2BK47H
2BK52H
2BK60H
2BK62H
2BK70H
2BK50H
2BK65H
2BK67H
2BK80H
2BK90H
2BK100H
3.35"
3.55"
3.76"
3.95"
4.25"
4.45"
4.95"
5.75"
5.95"
6.75"
4.75"
6.25"
6.45"
7.75"
8.75"
9.75"
5-406040
2TB40
4.35"
5-407034
5-407040
3TB34
3TB40
3.75"
4.35"
*5/8 Bore
2BK pulley
Pulleys
Fits Interpump, General and Admiral XLS, XDS Series pumps, plus XD3040,
Part No.
3TB pulley
LANDA
107
BURNERS
Burner Assembly
Electrode / Insulator Assembly
• High efficiency, low amp diesel burner
• “Clean Cut” fuel pump eliminates smoking
• Easy to adjust airbands
Part No.
Description
7-00030
7-00031
7-00009
7-00011
7-00012
7-00013
7-00021
7-00090
7-00010
14VDC, MHP, PGDC Units
14VDC, MVC
115V, AFG, VHW Units
115V, AFG, with Cap Start Motor, Skids, PHWS
115V, AFG, Hot Units
115V, AFG, HOT, OHW, PHWS Units
115V, AFG, VHW, VHWS Units
230V, AFG, VHW, VHWS Units
230V, SM, with120V Solenoid, HOT, OHW, PHWS Units
115 / 230 Volt Oil Burners
•
•
•
•
•
•
•
Part No.
Description
307032
307036
Beckett AFG 115
Beckett AFG 230
.4 to 3 GPH firing rate
6-1/4" blower fan 115V and 230V
3450 RPM pump/blower motor
Solid state ignition
Beckett “CleanCut” fuel pump with oil valve
Air tube 2-3/4"
UL recognized
12 Volt DC Oil Burner
•
•
•
•
•
12 Volt solid state ignition
1/6 HP
3450 RPM
4-1/4" Fan
Beckett “CleanCut” fuel pump with oil valve
Part No.
Beckett No.
Description
7-5780
079535
079536
079548
7-578726
7-578727
7-578711
5780
5940
5781
578728
578726
578727
578703
Std to 9", AC,A,F,SR, SM
Std to 9", MB/MD
Std to 9", A & S
ADC Electrode
ADC Electrode
Electrode Kit AFG
Electrode Kit SM
Flex Couplings
Part No.
Beckett No.
Description
2-001449
079521
7-2433
079523
7-21405
2454
2290
2433
21282
21405
Flex Coupling 5/16 "A", (M/A)
Flex Coupling 7/16 "S", (J/H)
Flex Coupling 5/16 "S", (M/A)
Flex Coupling 7/16 "A", (J/H)
Flex Coupling 12 VDC
Beckett Misc. Parts
Part No.
Beckett No.
Description
079530
079542
079543
7-3616
7-3416
7-5877
079595
079677
079674
7-7006U
079684
079675
079629
079573
7-51568
149
5432
5850
3616
3416
5877
5717 (51400)
51304
31404
7006U
7350U
3245
AF90
5151501
51568
Electrode Clamps (ALL)
Flange, with Gasket (ALL)
Flange, Split UnI, A&S
Gasket, Universal, AMF
Gasket, Unit Mtg
Burner Housing, AFG/ADC
Knurled Nut Kit, ADC
Transf Mtg Gasket, AFG
Transformer Clip
Cadcell Flame det
Primary Control (7434U)
Transformer Spring
Air Tube without Head
Air Band (3 x 92 AFG)
Brush Kit 12V ADC
Blower Wheels
Part No.
Description
307059
307061
Beckett 14V
Beckett 13.5V with Electric Eye
NOTE: Proper operation requires an engine with 16+ Amp alternator and deep cycle battery
on nightly, overnight recharge
108 LANDA
Part No.
Beckett No.
Description
079513
7-2383
7-2999
7-21404
2288U
2383U
2999U
21404
5-3/4D x 3-7/16W, SF-SM
6-1/4D x 3-7/16W, SR
4-1/4D x 2-1/2WAFG
4-1/4D x 2-7/16W, ADC
BURNERS
Your One Stop Shop for Parts
Burner Motors
Part No.
48M
48N
48M
079602
079605
079608
079613
079615
079021
48N
079604
079609
079611
079612
079021X
Universal
079022
7-0005
Burner Tune-Up Kit
•
•
•
•
•
•
•
•
•
Oil Iine – 8"
Buss bars
Buss bar bracket
Electrodes pair with insulator
Motor/pump coupler
Insulator bushing
Instructions
J pump coupling end
Tip setting gauge
Part No.
Wayne No.
Description
7-31156
31156
Burner Tune-up Kit
RPM
HP
Flange
Voltage
Wayne / Beckett No.
3450
3450
3450
3450
3450
4500
1/7
1/4
1/7
1/6
1/5
1/5
48M
48M
48M
48M
48M
48M
115V
12V
240V
13.5V
115/240V
12VDC
20627 / 2456U
N/A / 21539
20892 / 21174
21699U
N/A / 21345
21993-005 / N/A
3450
1/4
48N
3450
1/4
48N
3450
1/5
48N
3450
1/5
48N
Kit, 12VDC/MET to Fasco
115V
115/240V
240V
115V
N/A / 2364U
N/A / 21344
20328 / 2899
20554 / 2900
3450
3450
110-60 Hz
110/240V
Capacitor Start
Capacitor Start
1/7
1/5
48M
48N
Wayne Burner Parts
Part No.
Wayne No.
Description
7-13286
7-14733/34001
13286
14733-001
14734-002
12945
14344
12484
31421-001
2689-11
13279
N/A
13360
13038
2668
2669
31702-014
21913-001
Electrode Pair
Electrode Assembly (Pair)
with Buss Bars – G shape
Buss Bar – G shape
Burner Gasket
Universal Gasket
Burner Housing (E-Series)
Burner Flange “F”
Flex Coupler A Fuel Unit
Coupler End (J Pump 7/16")
Trans Clip Screw
Trans Clip
Outer Air Band (8 Hole)
Inner Air Band (8 Hole)
Gun Assy, F/307007
Nozzle Adapter with legs MSR/DC
7-12945
7-14344
7-12484
7-31421-001
079016
7-13279
079060
7-13360
7-13038
7-2668-002
7-2669-002
078979
7-21913-001
Blower Wheel
Common Parts - Beckett & Wayne
Part No.
Wayne No.
Description
7-20288
7-21854
7-20673
079003
7-21427
20288
21854
20673
21427-003
21427
5-3/16" x 3-7/16"
6-1/4" x 4-3/16"
4-1/4" x 3-1/8"
12V (Fasco)
(MET)
Oil Line
Brass Elbow
Part No.
Description
7-14451
7-0020
079525
7-13494
079067
079020
079051
Oil Line, 6.5", Copper
Oil Line, 8", Copper
Oil Line, 9.5", Copper
Brass 90° Elbow 1/8" flare, 1/8" MPT
Brass 90° Elbow 3/16 flare, 1/8" MPT
Oil Pressure Gauge 0 - 200 psi
(28737-1) Nozzle Adapter
LANDA
109
BURNERS
Burner Transformers
•
•
•
•
Burner Transformers
•
•
•
•
10,000 Volt spark
2.2 Amp @ 110V
8.5 lbs
Traditional copper wire wound
10,000 Volt spark
2.2 Amp @ 110V
8.5 lbs
Traditional copper wire wound
Part No.
Beckett No.
Mounting
Voltage
Part No.
Wayne No.
Mounting
Voltage
079668
079662
7-21176U
51343U
21376U
21176
AFG
S-SF-SR-SM
SM
230V
120V
240V
7-20358
079117
7-21153
079124
20358
20593
21153
21665
Side/EH-EHA
Back/M-MSR
Side/EH-EH
10KVA/Side
115V
115V
230V
115V
Burner Ignitors
Burner Ignitors
•
•
•
•
•
•
•
•
Solid state technology
14,000 Volt spark
Only .35 Amp @ 110V
1.7 lbs
Part No.
Beckett No. Mounting
Voltage
079669
7-515241
079670
079707
7-51824
079687
51501U
51524U
51499U
51506U
518240
51779U
115V
12VDC
12VDC
12VDC
120V
12VDC
AFG/Lo Amp
ADC without CB
ADC with CB
SDC with Con BD
SDC
SDC without CB
Solid state technology
14,000 Volt spark
Only .35 Amp @ 110V
1.7 lbs
Part No.
Wayne No.
Mounting
079111
079113
079107
079109
079106*
079120
079152
31813-001
31812-001
31813-002
31812-002
21985-001
31812-003
31813003
Side/EH-EHA
Back/M-MSR
Side/EH-EHA
Back/M-MSR
Module Only
Rear Mount
Side Mount (E)
Voltage
115V
115V
220V
220V
220V
12V
12V
*complete with Timer
Base Plates for Transformers
& Ignitors
12 VDC KIP Fuel Solenoid Valve
•
•
•
•
•
Part No.
Beckett
Part No.
Description
079644
079645
079646
079647
A Trans/Ign
S Trans/Ign
E Trans/Ign
M Trans/Ign
079652
Fuel Solenoid Valve
110 LANDA
Brass body
12V DC coil
1/8" FPT I/O ports
Conduit connector
5/64" orifice = 6 watt
BURNERS
Your One Stop Shop for Parts
Oil Solenoid Valve
•
•
•
•
Burner Accessories
Unitized mounting on Suntec fuel pumps
1/8" FPT inlet
300 psi
Uses standard SUNTEC coil
Part No.
Description
7-0009611
7-0009622
7-21441
079125
079126
079053X
079054X
079050X
7-21755U
079097
079098
7-3753895
079047
110V Oil Valve - R642
220V Oil Valve - R753
12/24V Oil Valve - R261
Flow Thru Connector Bolt
Aluminum Seal Washer
110V Coil with Cord Set
230V Coil with Cord Set
12/24 Coil with Cord Set
115V Coil with CleanCut
220V Coil with CleanCut
12/24VDC Coil without Cord Set
Cord Set Only
8mm Nut for Old Style Coil
9-028008
9-4007
• Coil Clean removes lime and scale
buildup and restores heating coil
efficiency
9-40083
• Soot-O-Magic help remove soot
from coils
• Red Devil Soot Remover eliminates
soot deposits
Part No.
Description
9-028008
9-4007
9-40083
112059
Coil Clean 8 lb
Soot-O-Magic, Stick
Liquid Soot Remover, Red Devil, Pint - 16 oz
Liquid Soot Remover, Red Devil, Quart - 32 oz
NOTE: No Air Freight shipments on the above items
Fuel Pumps
Draft Diverters / Rain Caps
• Draft diverter prevents
backdrafts, keeps cold air out
• Rain cap prevents water
running down vent pipes
• Fits on standard stove pipe
• Hot dipped galvanized
• Use with single or dual line systems
• Pressure adjustment valve
Part No.
112059
Description
GPH
RPM Rotation
Standard Pumps
7-0009
A2VA7116
3 3450
RH
079031
A1VA7112
3 1725
RH
079033
A2VC7118
3 3450
LH
079036
A1YA7912
7 1725
RH
079037
A2YA7916
7 3450
RH
079028
A2RA7710
2.5 3450
RH
Pumps with Solenoid
079038
A2VA2116 with 12V
3 3450
RH
079038-110
A2VA2116 with 110V 3 3450
RH
079038-220
A2VA2116 with 220V 3 3450
RH
Pump Replacement Parts
7-3715732
3715732 Pump Fuel Screen (A2VA 7116)
079055
3715744 Pump Fuel Screen (A2AVA 7916)
7-3779801
3779801 Gasket Cover
079164
Lip Seal
Simple design provides faster cleaning, more reliable cut offs,
and cut ons. Cleaner operation-less soot. More reliable-fewer
moving parts. Reduced motor load in start up. Higher capacity
- 4 GPM at 100 psi.
Part No.
Description
7-21844U
7-2184403U
7-00098
110 Volt
220 Volt
12 Volt
• Rated speed 3600 RPM
• Includes Built in solenoid
with cord set
7-10033
Part No.
Description
7-1003
7-10031
7-10032
7-10033
7-10034
8", Round
10", Round
12", Round
10", Exhaust Stack, Cap
12", Exhaust Stack, Cap
Flue Adapters
• Used to vent exhaust from
horizontal hot water machines
• Hot dipped galvanized
• Adapts to standard
stove pipe
7-10049
CleanCut Fuel Pump
• 100-200 psi Factory set 100 psi
• Inlet pressure 10 psi
7-10031
7-1004
Part No.
Description
30-199*
7-10049
7-10071
7-1004
7-10041
8" without Stack, new style kit
8" without Stack, new style
10" without Stack, SLT/SLX
8" with Stack, old style
10" with Stack, old style
*Includes insulation and mounting hardware
LANDA
111
BURNERS
Smoke Tester - Diagnostic Tool
“Snap” Fuel Nozzle Check Valve
The smoke tester gives you the ability to measure smoke (soot) density
and adjust air flow and fuel pressure to optimize burner performance.
Spring loaded “snap” check valve replaces filter element on fuel nozzle. Valve
opens when fuel pump pressure reaches 130 psi and “snaps” shut when fuel
pressure drops below 130 psi. Stops “smokey” burners at start up and eliminates
“shut down” after burn.
• Reduces nozzle fouling caused
by residual fuel in orifice
• Easy field installation in standard fuel nozzles
• Reduces soot build up in coil
A properly tuned burner:
• Heats water more efficiently
• Doesn’t build up soot in the coil
• Doesn’t pollute the air
• Keeps your customers happy
• A tool that should be used
by every serviceman in the industry.
Part No.
Description
079210
079211
079215
079214
Snap Fuel Valve, 100 psi
Snap Fuel Valve, 130 psi
Snap Check Valve, 130 psi (5 pack)
Snap Check Valve, 100 psi (5 pack)
Nozzle Accessories
Part No.
Description
449020
449019
Smoke Tester
Filter Paper Refill (40 sheet - 10 test per sheet)
Part No.
Description
079221
Nozzle Tray (Metal)
(Open Top, 55-Compartment, Plastic)
Delavan Fuel Nozzles
Select proper size for maximum burner efficiency.
GPH
079477
079479
079480
079481
079482
079483
2.00 x 60°W
1.65 x 80°W
1.50 x 80°W
1.75 x 80°W
2.00 x 80°W
2.25 x 80°W
079484
079486
079487
079490
079505
079492
2.50 x 80°W
2.75 x 80°W
3.00 x 80°W
4.00 x 80°W
1.65 x 90°W
2.00 x 90°W
NOTE: The above “W”
Nozzles are Stocked
All Sizes Are Available
112 LANDA
GPH
60° A
Hollow
60° B
Solid
70° A
Hollow
70° B
Solid
80° A
Hollow
80° B
Solid
90° A
Hollow
90° B
Solid
.50
.60
.65
.75
.85
.90
1.00
1.10
1.20
1.25
1.35
1.50
1.65
1.75
2.00
2.25
2.50
2.75
3.00
3.25
3.50
4.00
5.00
6.00
6.50
7.00
8.00
079225
–
079227
–
079229
079230
079231
079232
079233
079234
079235
079236
079237
7-0116
7-0117
079240
079241
079242
–
079244
–
–
–
–
–
–
–
079250
–
–
079253
079254
079255
079256
079257
079258
079259
079260
079261
079262
079263
–
079265
079266
079267
–
–
079270
–
–
–
–
–
–
079275
–
–
–
7-0104
–
7-0105
–
7-0106
–
–
7-01061
–
7-0107
–
7-0108
7-0109
–
079293
079294
–
–
–
–
–
–
–
–
–
–
079303
–
–
079306
–
–
079309
079310
–
–
079313
079314
079315
–
–
–
–
–
–
–
–
–
–
079324
079325
079326
079327
7-0120
079329
079330
7-0121
079332
7-0122
079334
079335
7-0123
079337
7-0124
7-0125
7-0126
7-0127
7-0128
7-0129
–
7-0119
079346
–
–
–
–
–
–
079351
079352
079353
079354
079355
079356
079357
079358
079359
079360
079361
079362
079363
079364
079365
079366
079367
079368
079369
079370
079371
079373A
079374
079372
–
–
–
079376
079377
079378
–
079380
079381
079382
–
079384
079385
079386
079387
079388
079389
079390
079391
079392
079393
079394
079395
079396
079398
–
–
–
–
079400
–
–
079403
079404
–
079406
079407
–
079409
079410
079411
079412
7-0101
7-0102
079415
079416
079417
079418
079419
079420
079421
–
079425
–
–
–
BURNERS
Your One Stop Shop for Parts
Cycle Pilot
Gas Valves - LP or Natural Gas
Gas Auto Relight Kits. Eliminate standing pilot in gas burners with a cycle pilot
relight kit. Retro Fit Kit includes: Gas valve, flame sensor, electrode pilot relight
and harness.
Universal type for building new systems or field replacement. 750 MV, 24V
or 120V Controls by White-Rodgers.
• 335,000 BTU max
• 3/4" inlet/outlet
• All adjustments &
wiring connections
on top of valve
• Automatic outlet pressure
regulator
• A.G.A. design certified,
C.G.A. certified
347400
Part No.
Description
347425
347418
347379
347416
347440
347446
24V Retrofit Kit (NG) 100,000 BTU
24V Retrofit Kit (NG) 335,000 BTU
24V Retrofit Kit (NG) 720,000 BTU
Cycle Pilot Control (347425) 24V
Cycle Pilot Control 120V
Gas Ignition Electrode (24" Lead)
Gas Burner Rings - N G or L P Gas Jets
The Standard for Gas-Fired Pressure Washers. Impinged Jet Burner Rings offer
the most efficient utilization of gas for heating water.
7-700021
Part No.
Description
7-700021
347400
347410
347412
347423
7-70001
7-70002
7-7000HC
7-7028
7-7LPKIT
3/4" NEW 24V Honeywell
Gas Valve 24V (1)
Gas Valve 120V (2)
Gas Valve 750 MV (1)
3/4" LP Conversion Kit
WR 36C03A-410, 3/4" White Rogers
7000DERCH, 24V Robertshaw
7000MVRHC, Robertshaw
700522, (Hwg-75-1), 1" Robertshaw
LPG Regulator Kit for Robertshaw
(1) Includes two 3/4" x 1/2" all-thread plated bushings and valve instructions.
(2) Includes L.P. Kit, two 3/4" x 1/2" and one 1/2" x 3/8" all-thread plated bushings
and all instructions.
1" Gas Valves by Robert Shaw
Universal type for new equipment or replacement.
•
•
•
•
•
Manual gas cock
Auto pilot safety valve
Wiring & hardware included
Pilot gas filter
600,000 BTU LP gas
720,000 BTU Natural Gas
• 1" inlet/outlet
Gas Burner Ring
Part No.
Model No.
Gas Burner Rings Only
347502
Z-21
347504
X-11
347506
X-44
347508
X-66
347510
X-88
Jets Req’d
1000 BTUH
20
32
44
66
88
100-200
160-320
220-440
330-660
440-880
NOTE: Gas jets sold separately.
Part No.
Description
347406
347407
347403
347409
240 Vac, NG, Standing Pilot
24 Vac, NG, Standing Pilot
24 Vac, NG, Electronic Ignition
700 MV, Natural Gas
LP Conversion Kit on next page
Gas Jets
Part No.
Drill Size
Orifice Size
Gas Jets for Burner Rings* (above)
347552
#52
(.0635)
347554
#54
(.055)
347562
#62
(.038)
347565
#65
(.035)
347566
#66
(.033)
347549
Blank (Must Be Drilled)
Use
NG
NG
LP
LP
LP
LANDA 113
BURNERS
LP Conversion Kit for Robert Shaw
Electronic Ignition
Convert NG to LP
7-70151
Part No.
Description
347421
347380
1" LP Conversion Kit
LP Orifice
• Replaces the need
for standing pilot
Gas Valve Accessory Components
Use with both 3/4" and 1" models above.
• Field installation kit
• Complete instructions included
Part No.
Description
7-701510
7-70151
Ignition Module - NEW
Ignition, Electronic Control
Propane Tanks
•
•
•
•
10.5 gallon / 30 lb
With or without gauge
Fits on LANDA propane machines
For outdoor use only
7-70237
7-7036, 347436
7-1015
7-70162
7-7022
Part No.
Description
7-70162
7-70163
7-70164
7-70165
7-70166
7-7017
7-7022
7-7023
7-70230
347430
7-7CH
7-70237
7-7034
347438
7-7036
Ignitor, Piezo
Electrode, Piezo Assembly
Washer, Panel Adapter, Piezo
Wire, 15" Assembly
Wire, 15" Assembly
Orifice, Pilot, LP, Small
Jet, Orifice, 638-69
Pilot Orifice, NG, Small
Pilot, Orifice, NG, Large
750 MV Generator
Pilot Assembly, VHP/VNG
Pilot, Natural Gas Electronic
Thermocouple, 24" White Rodgers
Thermo Couple (with 36") Cap Tube
Thermopile, VNG, 44 Mfg
114 LANDA
347431
Part No.
Description
7-1014
7-1015
10.5 gal/ 30 lb
10.5 gal/ 30 lb with Gauge
NOTE: No Air Freight shipments on the above items
Propane Gas Regulators
• High quality Fischer regulators
• High and low pressure
• Available individually or in 7-1010 kit
7-1010
Part No.
Description
7-1005
7-10050
7-10052
7-1010
High Pressure
Low Pressure
Regulator, Propane Gas, Fisher, VHP Units
L.P. Assembly: includes High/Low Pressure Assembly
BURNERS
Your One Stop Shop for Parts
Coils
Coil Insulation
• Cold rolled pipe, no weak points
from heating to make bends
• Heavy-duty schedule 80 carbon
steel pipe
• “Aluminized Steel” wrapper
• Best warranty in the industry
7-0140
7-0141
7-01401
7-01482
• Refractory grade ceramic
• Retains heat inside coil for better fuel
efficiency and paint protection
95-07121212
Part No.
Description
95-07121212
DuraCoil, Sch 80
with Aluminized Steel Wrap, Horizontal
DuraCoil 14.5" Dia, Sch 80, MVC, VHP
VNG-S after 4/99, new style, 18" dia.,
ENG,VNG, NG,VHG
DuraCoil, VNG, Large, after 3/97, new style
ENG,VNG,NG
VNG-S, 16" (5/89-3/99) Except 8-2500,
6-3000, old style
VNG-S Except 8-2500,
6-3000, old style pre 5/89
HWG-60 VNG6-3000, before 3/97, old style
HWG-75 VNG8-2500, before 3/97, old style
GTO Replacement Coil
DuraCoil, 6-3,8-3 VNG/VHG for modulating thermo
95-07121218
95-07121220
95-07121222
95-07121213V
95-07121212V
7-7041
7-7042
95-071212111
95-07121224
7-014832
Insulation & Rigid Disc / Donuts
7-01484
Part No.
Description
7-0140
7-0141
7-0144
7-01470
7-01471
7-01482
7-014832
7-01401
7-0142
7-01430
7-01484
7-014841
Front Head, No Hole
Burner Head, with Hole
Gasket, Burner Plate
Gasket, Skid Stackless Top
Gasket, Stackless Adapter
Tank Bottom, 1" Blanket, VHW, VHP
Tank Head 16" OD x 8" ID, VHW, VHP
Disk, Flash Pan, GTO (2 required)
Blanket, with Foil sqft (10 sqft required)
Blanket-No Foil, 24" x 57", Horizontal
Blanket-Die Cut, 28" x 24", Horizontal
Blanket-Die Cut, 33" x 89" (VNG)
Top & Bottom Wraps
Refactory Grade Ceramic Kawool Formed; retains heat inside coil for better fuel
efficiency and paint protection.
• Stainless and mild steel
95-07121011S
Part No.
Description
TK/Long
“Rigid Formed” Donut & Discs
122253
Donut
.88"
122258
Donut
.88"
122254
Disc
1/2"
122257
Disc
1/2"
Insulation Blanket
122204
Coil Wrap
1"
122205
Coil Wrap
1"
122206
Coil Wrap
1"
122222
Full Roll
1/2"
122225
Full Roll
1"
Dia/Wide
OD/ID
18"
16"
18"
16"
6"/4.4"
6"/4.4"
24"
24"
24"
24"
24"
4'
5'
6'
25'
25'
95-07121012
95-07290013
Part No.
Description
95-07121011S
95-07121014S
95-07121012
95-07121015
95-07290013
95-07290013S
Top, Yellow
Top, Stainless Steel
Bottom, Yellow
Bottom, Stainless Steel
Outer, MVC
Outer, Stainless, MVC
LANDA
115
ELECTRICAL COMPONENTS
Magnetic Starters
• Cutler-Hammer quality
• Highest HP rating
in a compact space
saving design
• Long-life twin break,
silver cadmium oxide
contacts provide superior
resistance to welding
and arc erosion
• Din rail mounting
Part No.
Model No.
6-4003
6-4000
6-4001
6-4002
6-4006
6-4004
6-4005
6-4007
6-4008
6-4009
6-4024
6-4012
6-4010
6-4011
6-4015
6-4013
6-4014
6-4016
6-4017
6-4020
6-4018
6-4019
6-4021
6-4022
CH CE15BNS3TB
CH CE15BNS3AB
CH CE15BNS3BB
CH CE15BNS3CB
CH CE15CNS3TB
CH CE15CNS3AB
CH CE15CNS3BB
CH CE15DNS3AB
CH CE15DNS3BB
CH CE15DNS3CB
CH CE15DNS3DB
CH CE15ENS3TB
CH CE15ENS3AB
CH CE15ENS3BB
CH CE15FNS3TB
CH CE15FNS3AB
CH CE15FNS3BB
CH CE15FNS3HB
CH CE15FNS3CB
CH CE15HNS3TB-09
CH CE15HNS3AB-09
CH CE15HNS3BB-09
CH CE15JNS3AB-09
CH CE15JNS3BB-09
Frame
Coil
Voltage
HP @ 115V
1 PH
HP @ 230V
1 PH
B
B
B
B
C
C
C
D
D
D
D
E
E
E
F
F
F
F
F
H
H
H
J
J
24V
120V
240V
480V
24V
120V
240V
120V
240V
480V
600V
24V
120V
240V
24V
120V
240V
277V
480V
24V
120V
240V
120V
240V
.05
.05
.05
.05
.05
.05
.05
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
3.0
3.0
3.0
5.0
5.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
10.0
10.0
Overload Relays
•
•
•
•
•
Cutler-Hammer quality
Direct heated bimetal elements
Adjustable trip current, overload trip indication
Manual/automatic reset
Din rail mounting
Part No.
Model No.
Frame Compatibility
6-5000
6-5002
6-5003
6-5004
6-5005
6-5006
6-5007
6-5008
6-5009
6-5010
6-5011
6-5012
6-5013
6-5014
6-5015
6-5016
6-5018
CH C316FNA3E
CH C316FNA3G
CH C316FNA3H
CH C316FNA3J
CH C316FNA3K
CH C316FNA3L
CH C316FNA3M
CH C316FNA3N
CH C316FNA3P
CH C316FNA3Q
CH C316FNA3R
CH C316FNA3S
CH C316FNA3T
CH C316KNA3B
CH C316KNA3C
CH C316KNA3D
CH C316KNA3E
A-F
A-F
A-F
A-F
A-F
A-F
A-F
A-F
A-F
A-F
A-F
A-F
A-F
G-K
G-K
G-K
G-K
116 LANDA
Amps
0.63-1.00
1.30-1.80
1.70-2.40
2.20-3.10
2.80-4.00
3.50-5.00
4.50-6.50
6.00-8.50
7.50-11.00
10.00-14.00
13.00-19.00
18.00-24.00
24.00-32.00
22.00-32.00
29.00-42.00
36.00-52.00
45.00-63.00
HP @ 230V HP @ 380V
3 PH
3 PH
2.0
2.0
2.0
2.0
3.0
3.0
3.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
20.0
20.0
HP @ 460V
3 PH
5.0
5.0
5.0
5.0
5.0
5.0
5.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
25.0
25.0
25.0
30.0
30.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
10.0
10.0
10.0
10.0
15.0
15.0
15.0
20.0
20.0
20.0
20.0
20.0
30.0
30.0
30.0
40.0
40.0
Push Button
& Contact Blocks
• Cutler-Hammer quality
• Heavy-duty
• Water tight/oil tight
6-2000
6-2021
6-2022
6-2023
Part No.
Model No.
Description
6-2004
6-2000
6-2001
6-2021
6-2022
6-2023
6-2020
CH C320KGS3
CH E22B1
CH E22B2
CH E22PB3
CH E22EB2
CH E22VB51
CH E22YED215
Contact Block, N/O, N/C
Contact Block, N/C
Contact Block, N/O
Switch, Green Push Button
Switch, Red Push Button
Switch, 2-position Lever
Switch, Red Lever
ELECTRICAL COMPONENTS
Your One Stop Shop for Parts
LANDA Flow Switch
•
•
•
•
•
•
Phoenix Flow Switch w/ Pilot
•
•
•
•
•
Horizontal or vertical mount
4350 psi
8 GPM max flow, 1.8 GPM min flow
180°F
12-250V, .8 Amps
3/8" FPT inlet/outlet
Part No.
Description
410320
410322
Switch with Pilot
Reed Switch
.75-16.0 GPM
4000 psi
165°F
3 Amp-250 Volts
96" Reed Cord
•
•
•
•
Includes 8mm Pilot
3/8" F inlet/outlet
2.5 lbs
Mounting Hole
6-021730
Part No.
Description
6-021730
6-021740
LANDA MV60, Gray
Replacement Reed Switch
VAC Switch - Burner Control
Legacy 500 Flow Switch
Normally open (NO) switch closes when pump vacuum begins drawing water and
opens when vacuum is broken due to pump shut down or empty water tank.
Vertical mounting or versatile mounting.
• Tough, impact-resistant,
glass-reinforced, nylon housing
• Tungsten contact reed switch
• Heavy-duty machine brass internals
Part No.
Description
410305A
410308A
109672
Vertical Mount Only
Mount in Any Position (Gray)
Reed Switch Only (2 wire)
•
•
•
•
•
•
•
•
Viton seals
For solenoid control only
1-8 GPM
4350 psi
190°F
3/8" Inlet / Outlet
1 Amp switch
2 Wire Reed
• 1/4 FPT connect
• Heavy-duty 16 Amp contacts
• 140°F max water temperature
Part No.
Description
413031
413032
413034
1.5" (HG) Vac Switch
2.5" (HG) Vac Switch
4.5" (HG) Vac Switch
Pressure Switch
Operation without opening switch case – Blue = Common
CONNECT: Red/Blue = N/C, Blue/Brown = N/O
Flow Switch
•
•
•
•
•
•
Spring return float allows full mounting versatility.
• 4050 max pressure
• 3500 rated pressure
• Horizontal
or vertical mount
• Forged brass body
• NEW 3-wire
reed switch
Part No.
Description
410307P
109672
Flow Switch
Reed Switch Only (2 wire)
•
•
•
•
•
3/8" MPT inlet/outlet
8 GPM
190°F
One Amp switch
Solenoid control
200°F
Stainless steel plunger
3600 psi
1/4" MPT nipple
15 Amp – 115 or 230V AC
3-wire – Internally wired
for either N/O or N/C
Part No.
Description
411060
411060-40
082022
082023
Pressure Switch (Switches @ 360 psi)
Pressure Switch (Switches @ 580 psi)
Micro Switch (10 Amp 28VDC)
Micro Switch (15 Amp 115/230VAC)
NOTE: 10 AMP 28 VDC Micro Switch available. Excellent for use on 12 VDC Hot Pressure Washers.
Flow Switch
ST-5
Compact Pressure Switch
• Brass body
• 8 GPM
• 3600 psi
• 3 Amp reed switch
• 180°F
• 3/8" inlet
& outlet ports
Three Amp rating provides the switching power to control fuel solenoids
just like the large switches. Body measures 1" x 1-1/4" x 2" (Not including
wire or connector)
• 3600 psi
• 580 psi
switch pressure
• 200°F
• 1/4" brass MPT
connect SS plunger
ST-6
Part No.
Description
6-02173
6-02175
109672
109675
109673
ST-5 – Vertical Mount Only
ST-6 – Horizontal or Vertical Mount
Reed Switch (AP) (2 wire)
Reed Switch - ST 5
Reed Switch - ST 6
Part No.
Description
411050
Compact Pressure Switch
• 3 Amp switch rating –
250V
• 48" – 3-wire cable
for use in either NC
or NO application:
Blue = Common
Brown = NO;
Red = NC
LANDA
117
ELECTRICAL COMPONENTS
Black Pressure Switch
Accura High Limit Switch
• Brass stem and
stainless steel nipple
• 3600 PSI
• 580 PSI
switching pressure
Part No.
Description
6-021720
Black Pressure Switch
•
•
•
•
•
195°F
1/4" male inlet
15 Amp
Weight: 8 oz
250 volts
Red Pressure Switch
• All stainless steel
construction
• Rated pressure:
5800 psi
• 6500 psi
max pressure
• 640 psi
switching pressure
Part No.
Description
411065
111459
Red Pressure Switch
Heavy-duty MicroSwitch
•
•
•
•
195°F
3/8" male inlet
15 Amp max draw
Weight 10 oz
Toggle / Push Button Switch
• 7/16" mounting bushing
• 1/2" diameter mounting hole required
• Mounting hardware included
Part No.
Description
411605*
SPST, 20A/110V
411607
DPST, 20A/110V
337206*
DPST, 20A/125V
337205*
DPST, 20A/250V
337208*
DPST, 16A/125V
285140*
SPST, 20A/120V
285189*
DPST, 20A/120V
337207
Switch Guard
Push Button Switches
285139
SPST, 5A/120V
Push on/ push off
285187
SPST, 15A/120V
Push and hold on/ release off
HP*
Connects
1.0
m/spade
m/spade
screw
screw
screw
m/spade
screw
1.5
2.0
1.0
3/4
3/4
screw
Rocker Switches
• On/off switch
• Lighted
available
• 125/250V
6-020252
6-020240
6-020241
Description
AMP
Voltage
6-020251
6-020252
6-020253
6-020240
6-020241
Curvette, V. Carling
Curvette, 2-pos
Curvette, 3-pos
Carling, Green Light, 2-pos
Carling, Red Light, 3-pos
16/10
20/15
16/10
15/10
15/10
125/250
125/250
125/250
125/250
125/250
118 LANDA
Part No.
Probe MPT
Temperature
411250
411254
411256
411262
411266
411272
411276
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
110°F
120°F
140°F
170°F
180°F
210°F
230°F
411264
411268
411270
411232
411278
411332
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
180°F
200°F
210°F
230°F
250°F
330°F
141538
1/2"
PVC Coupler
Accura High Limit Switch
w/ Wire Lead
screw
Part No.
• Heavy-duty brass housing
(7000 psi collapse rating)
• UL - CSA rated,
bimetal switch components
• 1/4" male spade lug terminals
• 1/2" MPT external thread connects
for attaching conduit or PVC wire
connectors
• Operates as safety device to shut off burner to prevent
machine (water) overheating flashing to steam
• Does not turn back on until water has cooled
50° - 70°F
• Normally used with other adjustable or fixed range
thermostat which regulates water temperature
• 15 Amp @110V/10 Amp @ 220V
• Heavy-duty brass housing (7000 psi collapse rating)
• UL - CSA rated, bimetal switch components
• 1/4" male spade lug terminals
• 1/2" MPT external thread connects for attaching
conduit or PVC wire connectors
*Motor rated
6-020251
• Operates as safety device to shut off
burner to prevent machine (water)
overheating flashing to steam
• Does not turn back on until water
has cooled 50° - 70°F
• Normally used with other adjustable or
fixed range thermostat which regulates
water temperature
• 15 Amp @110V/10 Amp @ 220V
Part No.
Probe MPT
Wire Lead
Temperature
411274
4-0509
4-0510
411233
4-05010
1/2"
1/2"
1/2"
1/2"
1/2"
36"
42"
42"
80"
80"
210°F
230°F
275°F
230°F
330°F
ELECTRICAL COMPONENTS
Your One Stop Shop for Parts
Ground Fault Circuit Interrupters (GFCI)
Magnetic Motor Starters
GFCI’s protect people and equipment by interrupting potentially lethal ground
circuits exceeding 6mA. The dangers of electrical shocks have been long known –
GFCI’s are the only real way to be safe. Most city & county codes now require
GFCI protection on power cleaning equipment.
For pressure washer and carwash applications.
•
•
•
•
•
•
•
•
•
Part No.
Volt
6-01062
120V
337626
120V
337607
120V
337608
120V
6-01060
120V
337627
220V
337630
240V
6-010631
240V
337632
240V
337645
240V
337647
240V
337634
240V
337649
240V
6-01059
240V
6-010690
240V
GFCI Plug without Cord
6-01061
120V
337614
120V
U.L. listed
Three wire circuits
Transient voltage protection
4 - 6mA ground fault protection
Grounded neutral protection
Mechanical trip indicator
Compact size
Rugged construction
Radio frequency interference suppression
Amp
Length
Plug included
15A
15A
20A
20A
20A
15A
15A
20A
30A
30A
30A
30A
30A
30A
40A
36 ft
12 ft
12 ft
12 ft
35 ft
6 ft
12 ft
36 ft
6 ft
6 ft
12 ft
12 ft
35 ft
35 ft
36 ft
yes
yes
no
yes
yes
yes
yes
yes
yes
no
no
yes
no
yes
no
15A
20A
N/A
N/A
yes
yes
NOTE: User-attached plug also includes the sealant necessary to attach the power cord
per UL Specification.
GFCI Module 20 Amp - 120V or 240V
Not recommended for field service.
• Using 120V or 240V shop attachable module;
attach your power cord length as required
• Use with 16–12 gauge SJ, SJO or SJT 3-wire cords
• 20 Amp rating at 120V or 240V 60 Hz
Part No.
Description
6-01063
GFCI Module
Enclosure Box
for Magnetic Motor Starter Sets
Contactor
Overload
Coil
• 24VAC Control
• 1Ø - 240V, 3Ø - 240V
or 480V Contactor
• Componentized for flexibility
• Thermal overloads adjustable
within range shown
• Electrical life: 1,000,000+ cycles
• Mechanical life: 20,000,000+ cycles
• Contacts: 90% silver, 10% cad-oxide
24V
Type Coil
120V
Coil
220V
Coil
FL
Amp
220V
1Ø HP
Contactors
A 260265
B 260266
C 260267
D 260268
E 260269
F 260351
260290
260291
260292
260293
260294
260352
260295
260296
260297
260298
260299
260353
22
24
32
40
52
90
2
2
3
5
7.5
10
Part No.
Coils Only
260274
260272
260273
260275
260277
260278
260427
260428
220V
3Ø HP
440V
3Ø HP
UL Rating
3
5
5
7.5
10
15
Voltage
Fits Contactor
24V
120V
220V
480V
120V
220V
120V
220V
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
E
E
F
F
Part No.
Thermal Overloads
260253
260270
260271
260247
260248
260249
260433AUTO
260437AUTO
260440AUTO
260253AUTO
260270AUTO
260271AUTO
260247AUTO
260248AUTO
260249AUTO
Type
Amp Range
Man
Man
Man
Man
Man
Man
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
9.0-15
14-23
17-26
20-33
28-42
35-50
2.0-3.3
4.5-7.5
6.0-10
9.0-15
14-23
17-26
20-33
28-42
35-50
5
7.5
10
15
20
30
Fits Contactor
A,B,C,D
A,B,C,D
A,B,C,D
C,D
C,D
E,F
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
A,B,C,D
C,D
C,D
E,F
• Used to mount Overload to Motor Starter Contactors
• NEMA 65 non-metallic enclosure Dim:
4-1/3" W, 4" D x 6" H
• 8 (1/2-3/4") wiring knockouts on box
• Holes pre-drilled for mounting contactor and
overloads with mounting screws included
Part No.
Description
260268X
Box, Toggle & Hardware
Part No.
Description
Thermal Overload Connector Kits
260281
A,B,C,D
260284
E
260349
F
LANDA
119
ELECTRICAL COMPONENTS
On / Off Rotary Switch
Universal “Elektra”
• Single or three phase
• 2 position or 3 position
• Heavy-duty
UL/CSA Rated Machine control cam switches
6-020201
Part No.
Description
6-020201
6-020203
6-020204
115-230V, 1PH 3-position
230/460V, 3PH 3-position
120-600V, 1-3PH 2-position
410251
Machine Control Cam Switch 3 Position
•
•
•
•
•
•
Part No.
Model
Heavy-duty rotary cam switches
Legend plate reads Off/Pump/Burner
Quick Make/Break action reduces arcing
Wiring boot included (except 410242-3)
Legend plate 2-1/2" square
Four-screw mounting
Amp
410210
S220-1686
20
410221
S220-1687
20
410223
S220-1688
20
410231
S225-1686
30
410232
S225-1687
30
410233
S225-1688
30
410242
S432-4095
40
410243
S432-1402
40
Single Hole Mounting - requires a 22mm
410208
220-1789
20
Voltage
Phase
110V
1Ø
220V
1Ø
220V
3Ø
110V
1Ø
220V
1Ø
220V
3Ø
240V
1Ø
480V
3Ø
(7/8" Dia) hole
110V
1Ø
“Big Boot” Cam Switch - 3 Position
Large rectangular boot for easier wiring.
Part No. Amp
410251
410253
410263
410267
Model
Amp
410260
T225-1686
30
410262
T225-1687
30
410265
T225-1688
30
Single Hole Mounting - requires a 22mm
410219
220-1843
20
410263
25
25
35
50
Wiring Poles
1
2
2
2
• Screw to screw/terminal to terminal
replacement for salzer “S” & “J” type
switches above
• “Tite Boot” excellent dust
& moisture seal
• Contacts UL/CSA Rated: 25 Amp vs
20 Amp, 35 Amp vs 30 Amp, 50 Amp
vs 40 Amp
Phase
Voltage
HP
1
1
1
1
120
120/240
120/240
120/240
1.5
1.5/2.0
2/3
3/7.5
NOTE: None of the ELEKTRA switches are for use on 3 phase motors without adding fuses
or thermal overload.
“Elektra” On - Off Switch with box UL/CSA Rated 25
& 35 Amp. Compact 3-1/4" Square x 3-3/4" Deep
Enclosure “Versatile Mount”.
Part No. AMP
410203
410205
25A
35
Wiring Poles
2
2
Phase
Voltage
HP
1
1
120/240
120/240
1.5/2
2/3
NOTE: None of the ELEKTRA switches are for use on 3 phase motors without adding fuses
or thermal overload.
60 AMP On / Off Cam Switch & Box
Cam Action Fast “Make-Break” to reduce arcing.
• 60 Amp disconnect rating
• Four 1/2" knock-outs
• Versatile mounting
• Mounting configuration and electrical ratings
same as “S” switches above
Part No.
410253
• Position - “Off”- “Pump Burner”
• Quick make/break action reduces arcing
• 2 or 4 screw mount
(2-1/2 square legend plate)
• (Matches: Salzer/Kraus -Naimer/
Bremas & Klockner - Moeller mounts)
• “Boot” has plenty of wiring room
Voltage
Phase
110V
1Ø
240V
1Ø
240V
3Ø
(7/8" Dia) hole
220V
1Ø
• Motor Ratings:
7.5 HP @ 240vt 1Ø
5.0 HP @ 240vt 3Ø
30 HP @ 480vt 3Ø
Part No.
Description
410206
60 Amp Switch with Large Box
4-1/2" w x 7" H x 3-3/4" D
60 Amp Switch only
Box only 3-7/8" x 4-7/8" x 2-3/4" for
410190 switch using 10 gage/smaller wire
Knob
410190
410192
076521
NOTE: Switch does not have thermal overload protection
On / Off Cam Switch
• Legend plate: On/Off
• Tear drop-shaped knob
• Face plate 2-1/2" square
Part No.
Description
410202
410204
20 Amp/ 110 Volt
28 Amp/ 240 Volt
30 AMP Toggle Switch
• Motor Ratings:
410202 – 1-1/2 HP/ 110V
410204 – 6 HP/ 240V
• 30 Amp 600 Volt - DPST
• With or without box
Part No.
Description
337187
337188
337210*
Switch only
Switch & Rain Tight Box
Switch with NEMA 1 Box
*Not Rain Tight (Baldor Replacement)
120 LANDA
• Rated for:
2 HP motor @ 115V
3 HP Motor @ 230V
ELECTRICAL COMPONENTS
Your One Stop Shop for Parts
Manual Motor Starter w/ Sealed Box
Voltage Regulator
• 25 Amp
• 2 cord grips fit
with adjustable overload
1/2" threaded knockouts
• Adjustment range
• Protective cover
20-25 Amps
over buttons
• Sealed box
• Single & 3-phase wiring
3-1/4"W x 3-1/2"D x 6-1/2"H
instructions
• 110-500 Volt IEC rated
Part No.
Description
337212
Motor Starter
Winco AC Generator
2000 Watt, 120 VT, 3600 RPM, 16.7 Amp.
• Industrial-duty – 3 carbon brushes
• The STANDARD in the pressure
washing industry: WINCO 2FSM2PC-1
• Starts & runs 1/2 HP motor
• 5/8" diameter shaft rotates
either direction
Part No.
Description
6-0601
Winco AC Generator
• Genuine Winco parts
Part No.
Winco Repair Parts
078451
Bearings
6-0605
Brushes
6-0607
Capacitors
6-0608
Rectifier
078457
Receptacle
078459
Fan
Part No.
Description
6-0615
25 Amp, 15 Volt
Adjustable
Thermostat Switches
• Capillary tube provides fast response time
• Prevents burner from overheating
• Adjustable to 300°F
• Extra slip ring for smoother power
curve during motor starting
• Dual sealed permanent bearings
• 15" L x 6.5" W x 6.75" H
• 59 lbs weight
Part No.
Description
4-05088
4-05090
300°
175°, SJ Units
Adjustable Thermostat
• Save downtime–we stock below items
& more!
Description
• Designed specifically for LANDA
for use on 12VDC burner systems.
With panel-mount controls.
•
•
•
•
•
•
•
•
No. Req’d
2
3
2
1
2
1
4000 psi
302°F
3-1/2" immersion bulb with 60" capillary tube
Accuracy ± 2.5%
Temperature change response within ± 6°F
16 Amp - 250 volt
Large easy read dial
Seal, nut & 1/2" transition coupling included
Part No.
Description
430050
430058
430060
0-194°F Thermostat
0-248°F Thermostat
0-302°F Thermostat
Voltmaster Generator
Adjustable Flow Thru Thermostat
2500 Watt/120V/21.6 Amp @ 3600 RPM.
• Industrial-type
watertight enclosure
(11-5/8" x 7-1/2" diameter)
• Brushless design
• All copper winding
– High surge capacity
• Circuit breaker protection
(standard)
Part No.
337441
337443
• Shaft rotates
either direction
• 7/8" shaft, 2 sealed
(ball) bearings
• 36.5 lbs weight
• Adapter plate
for replacement
of Winco model
2FS2PC-1 available
430027
4-05083
•
•
•
•
Stainless Steel Case
Silver Contacts
Ceramic Insulation
Stop Collar
•
•
•
•
Description
Part No.
Description
2500 Watt Generator
Adapter Plate & Fasteners
430027
4-05083
Thermostat
Switch Only
Tension Adjusting Screw • Adjustable 85° - 195°
3000 psi
• 1/2" inlet / 3/8" outlet
10 Amps - 110 Volts
• Fenwall Inside
5 Amps - 220 Volts
LANDA
121
ELECTRICAL COMPONENTS
In Line Thermostat
Fuses
In Line Controls for Pressure Washers and Steamers.
• Full range of fuses
• Protect your equipment
•
•
•
•
Part No.
Description
430025
430035
60-250°F
60-350°F
Positive bimetal temperature control
1/2" inlet/outlet FPT ports
2000 psi max working pressure
Universal 1/4" spade terminal connection
Solid State Temperature Control
• Solid state controls
• Thermistor provide accurate
and timely cutoff
at proper temperature
• Adjustable up to 350°F
4-05085
4-05086
Part No.
Description
4-05085
4-05087
4-05086
275°
350°
Thermistor
Timers
• Preset and adjustable available
• Heavy-duty
6-03700
6-036880
Part No.
Description
6-03700
6-036880
Multi-function, 24V-120/240V Time Delay Timer
Solid State, 120V, 5-60 Minute Adj for Auto Start84.50
Part No.
Code
Max Voltage
Amps
6-022970
6-0229810
6-0229710
6-02320
6-023080
6-023090
6-02321
6-022910
6-022920
FNM1/2
FNM8/10
FNM1
FNM2-1/2
FNM3
FNM5
FNM7
FNM8
FNM10
250V
250V
250V
250V
250V
250V
250V
250V
250V
0.5
0.8
1.0
2.5
3.0
5.0
7.0
8.0
10.0
6-02311
6-02312
6-02306
FNQ3/10
FNQ6/10
FNQ-R-3
500V
500V
600V
0.3
0.6
3.0
6-02296
6-02295
6-02294
6-022982
6-02299
6-022990
6-022992
6-02307
6-02304
KTK-R1/4
KTK-R1/2
KTK-R1
KTK-R1-1/2
KTK-R2
KTK-R2-1/2
KTK-R4
KTK-R5
KTK-R30
600V
480V
240V
600V
120V
600V
600V
600V
600V
0.25
0.5
1.0
1.5
2.0
2.5
4.0
5.0
30.0
6-02297
6-022981
6-022971
6-02298
6-02308
6-02309
6-02291
6-022911
MDL1/2
MDL3/4
MDL1
MDL2-1/2
MDL3
MDL5
MDL7-1/2
MDL8
120V
250V
250V
24V
250V
250V
250V
250V
0.5
0.75
1.0
2.5
3.0
5.0
7.5
8.0
Circuit Breakers
Indicator Lights
• Easily mounts to control panel
• Available in 12V, 24V, and 125V
• Great for remote applications
6-050413
Part No.
6-02053
6-020530
6-050413
6-0399
6-03990
6-02059
6-020590
122 LANDA
• Provides protection against
excessive Amp draw
6-020590
Voltage
125V
125V
125V
24V
24V
12V
12V
Color
Red
Green
Amber
Red
Green
Red
Green
6-04121
Part No.
Description
6-04121
6-041250
8 Amp
25 Amp (All 12V Systems)
ELECTRICAL COMPONENTS
Your One Stop Shop for Parts
Relays
6-03621
6-0367
Junction Boxes
6-035210
6-03541
6-03671, 6-036710
6-036210
6-0381
Description
6-03621
6-03521
6-035210
6-03541
6-036210
6-0367
6-0381
6-0374
120V, RH2B-Ul-AC120 for Pressure Washers
240V, RH2B-UI-AC240 for CL, CLP
Socket, SH3B05*IDEC for Auto Start/ CLP
Base, SH2B-05 for IDEC
Latch 2, RH2LBUAC120*IDEC Auto Start/ CLP
24V, IDEC CLP
Power Deltrol, 120V for SJ-5, CL, WS
Relay, Power Omron G4B112T1FDCUSRPAC120
for Delta/Alpha
P&B/VF4-41F11, 12VDC, 40 Amp
for 12VDC Units 13hp & Below
Relay, P&B, 24V/40 A
for 12 VDC Units over 13hp
6-036711
Step-Down Transformers
6-6031
6-60121
6-6035
6-03901
6-03904
6-03907
6-03909
6-03910
6-03912, 6-03913, 6-03906
6-0409
6-0410
6-04101
6-04104
6-0374
Part No.
6-03671
6-0390
• Industrial duty
• High quality
CutlerHammer
• Drops primary voltage
to selected secondary
voltage
Part No.
Primary Voltage
Secondary Voltage
Size
6-05234
6-6031
6-60121
6-6035
6-60161
6-60141
6-60151
6-6025
6-60051
6-60021
6-60111
6-60101
6-60131
600V
380/400/415
120/240V
120/240V
208/230/460V
208/277V
208/277V
380V
240/480V
240/480V
240/480V
240/480V
550V/575/600V
120-240V
110/220V
24V
24V
24/115V
120V
120V
24V
120/240V
120/240V
120V
120V
115V
1.0KvA
.750KvA
.050KvA
.100KvA
.050KvA
.050KvA
.075KvA
.050KvA
.200KvA
.500KvA
.075KvA
.050KvA
.050KvA
Part No.
Description
6-0390
6-03901
6-03904
6-03906
6-03907
6-03909
6-03910
6-03911
6-03912
6-03913
6-0409
6-0410
6-04101
6-04102
6-04103
6-04104
6-041041
6-041043
6-0411
6-04110
6-041100
VNG Remote, Plastic
12" x 12" x 4", Metal VNG Remote Wiring Box
Fiberglass, NEMA4 for PE Units
12" x 10" x 5.25" for Solid Sep/ Water Blast/ AMC
8" x 8" x 4", Plastic Alpha, for SEA 3-1100
10" x 8" x 6", Box, Plastic with Lid for SEA
Box, Plastic without Lid E9801
Lid, Plastic for 6-03910
18" x 16" x 9.25", Plastic for CLP, WB
14" x 16" x 6.75", Plastic for CL, HBG, AMC, Delta
Cover, Duplex Receptacle for Alpha
2" x 4", 3-hole, 1/2" WB, for CLP
2" x 4", Extension, for 6-0410, 6-04102, 6-04103
2" x 4", 5-hole, 1/2" for CLP
2" x 4", 4-hole, 1/2" for CLP
4" x 4", 3-hole, SK Series for Alpha/ PK
4" x 4", 5-hole, 1/2" for WB
4" x 4" SK, Cover Plate, for WB for 6-00041
2" x 4", Cover Plate, for 6-0410
2" x 4", Junction 3-hole, 3/4"
2" x 4", 3-hole, 1" for ENG
LANDA
123
ELECTRICAL COMPONENTS
RainTite Switch Box
Cord Caps / Plugs
•
•
•
•
UL 728A
2-3/4" x 5-1/2" x 2" box
Three 1/2" tapped holes
Box includes 2 plugs, ground screw
& mounting lugs
• Cover includes gasket
Part No.
Description
337203
337204
RainTite Switch Box
Switch Box Cover
337000
337004
337006
337013
Part No.
Description
337000
337004
337006
337013
15A/120V, Black Nylon
20A/120V, Black Nylon
20A/250V, Black Nylon
30A-50A/250V, Black Vinyl
• Industrial quality
• Dead front cord caps –
nylon body straight plugs
& “Auto-Clamp” for cord
• 337013 angle plug has vinyl
body and both 30A & 50A
neutral leg
Molded Power Cord
Strain Reliefs
• Water tight
• Factory finished look
• Used on skid generator units
• 1/2" and 3/4"
• Liquid tite
available
• Heavy-duty
6-05153, 6-05152
6-051595
6-05154
Part No.
Description
6-0107
3' 14-3 Cord with Plug
Wire Loom - for wiring harnesses
6-05161
Part No.
Plastic
6-05152
6-05153
6-05154
6-051500
6-051595
6-051591
6-051593
6-05159
6-051592
6-05181A
6-05181B
Metal (Romex)
337020
6-05161
6-0517
6-05181
Aluminum
6-05180
6-05220
124 LANDA
6-05180, 6-05220
6-051591, 6-051593
• Protects wires from abrasion and crushing
• Controls bundles of wires and allows
for multiple exits at wiring points
• “Factory Perfect” look for all machines
6-05159, 6-051592
Description
1/2", Straight, small
1/2", Straight, large
1/2", Flexible, 80° to 90°
3/4", Flexible, 80° to 90°
3/4", Straight
1/2" 90°
3/4" 90°
Straight, 1/2"
Straight, 3/4"
Locknut, 1/2"
Locknut, 3/4"
1/2" Straight
3/8" Straight
3/4" Straight
Locknut, 1/2"
1/2", Straight
1", Straight
Part No.
Description
337120
337121
337122
337123
1/4" ID 100' Roll
3/8" ID 100' Roll
1/2" ID 100' Roll
5/8" ID 100' Roll
Vinyl Electrical Tape
• Premium grade - 7 mil
• UL approved
• 3/4" x 60
Part No.
Description
118910
Roll 3/4" x 60'
CHASSIS COMPONENTS
Your One Stop Shop for Parts
Float Tank
Fuel / Chemical Tanks
•
•
•
•
•
3.5 gallon capacity
22" x 13-1/2" x 5"
Heavy 3/16" durable plastic
Convenient mounting tabs
Complete assemblies available,
call with model number
Suitable for primary or auxiliary fuel tank or for onboard chemical holding tank.
344727
Part No.
Description
2-01164
95-07121207
Universal Plastic Float Tank
Lid & Hinges
344128 Cap
• Molded seamless tanks
• 2-1/4" filler neck
• Heavy-duty polyethylene complete
with mounting tabs
Fuel Tanks
• International Color coded
for gas (red) and diesel
(Green)
• Rugged fill neck cap
with vent
• Semi transparent shows
fuel level
• Heavy-duty 14 gauge
2-011502
2-011501
Part No.
Description
2-011501
2-011502
2-011503
2-01154
2-011541
10 gal Poly, Yellow, Skids
5 gal Poly, Red, Skids
10 gal Poly, Red, SGHW
6 gal Poly, Yellow, VHW/MVP/MVC
6 gal Poly, Red, MPG
NOTE: Cap not included with tank
Molded Plastic Float Tanks
• Suitable for gasoline, diesel fuel
alkaline or acidic chemical
(Not for use with solvents)
• Versatile - no pre-drilled suction/
return ports
Part No.
Description
Height
Depth
Length
344727
344728
9 Gal Fuel Tank
10"
Vented Cap, 2-1/4" Thread
12"
19-5/8"
NOTE: Cap not included with tank
9 Gallon Fuel Tank
•
•
•
•
•
•
•
Part No.
Description
344735
9 Gallon Fuel Tank
9 gallon black plastic tank
Strap or Bolt mount (4/5/16" inserts in bottom)
Metal inset 3/8" inlet/return lines
Black - Crosslinked PE
Vented fuel cap
Filler neck doesn’t extend beyond tank wall
Compact Size: 19-3/4" L x 12" W x 10-1/2" H
NOTE: Includes fuel cap
•
•
•
•
•
Molded polypropylene
7 liter size: 13" x 5" x 6"
1 gallon size: 10" x 5" x 8"
No holes for max flexibility
1 gallon tank has tight-fitting
lid, included
• 7 liter tank lid is snap-on
& sold separately
Part No.
Description
343002
343003
343004P
7-Liter Tank Only
7-Liter Tank Lid
1-Gallon Tank with Lid
Fuel Tanks
091504
091502
Stainless Steel Float Tank
•
•
•
•
•
•
Part No.
Description
343006
343016
Stainless Steel Float Tank
Stainless Steel Lid
Fully welded and water tight
2.8 gallon capacity
12" x 9" x 6"
16 gauge #303 stainless steel
1/2" full coupling (SS) inlet/outlet
Convenient mounting tabs
091505
091506
• Seamless one-piece construction
of marine grade, UV-protected
polyethylene
• Built-in reserve (When gauge reads
Empty, tilt to access additional fuel!)
Part No.
Gallons
2-01152*
091504
091505
091506
6.0
8.5
11.5
12.0
•
•
•
•
Rugged fill neck cap with vent
90° fuel withdrawal fitting
Easy-to-read sight gauge
4 shapes & capacities from which
to choose
Height
Length
Width
10.5"
10.0"
14.0"
11.5"
21.50"
20.25"
20.25"
18.50"
13.50"
14.25"
14.25"
24.75"
*Built-in Carrying Handle
LANDA 125
CHASSIS COMPONENTS
Battery Boxes w/ Cover, Marine Style
Complete Wheels
Protect batteries on pressure washers, boats or other industrial equipment.
• Attractive molded polypropylene
• Complete with hold-down cleats and strap for cover
4-0304
4-0303
4-0305
4-0307
• Replacement for all LANDA machines
• High quality pneumatic, and semi pneumatic
• Fits 5/8" shaft, except 4-0305 fits 1/2" shaft
Small:
L: 8-1/2" W: 6" H: 8-1/2"
Large: L: 11-1/4"
W: 7-3/4" H:10-3/4"
Part No.
Description
306625
306627
Small Box
Large Box
Fuel Caps
Part No.
Description
4-0304
4-0303
4-0307
4-0305
10" Mag
10" Steel Rim with Tube
13" Steel Rim
8" x 1.75", Semi-Pneumatic
Tubes & Bearings
• Replacement for
standard LANDA machines
2-01167
2-01157, 2-01158
2-01153
Part No.
Description
2-01167
2-01157
2-01158
2-01153
Threaded Cap (Fits All Poly Fuel Tanks)
Cap, 14" with Fuel Gauge, PHW & PGHW Metal Tanks
Cap, 18" with Fuel Gauge, SGHW Metal Tanks
Cap, Plastic, Twist Lock, PHW Metal Tanks
Chrome Fuel Caps
• For gas or diesel fuel tanks
• Fits standard 2-1/4" fuel necks
4-03031
4-03910
Part No.
Description
4-03031
4-03172
4-03162
4-03910
076505
076504P
076505P
10" Inner Tube
12" Inner Tube
13" Inner Tube
5/8" Wheel Bearing
3/4" Bore Bearing
5/8" Nylon Bearing
3/4" Nylon Bearing
076504P
Caster Wheels
Part No.
Description
344725
Chrome Cap
Hand Tote ll
Strong. Lightweight. Versatile.
• Strong 1" square
• Durable gloss black
steel tubing
polyurethane finish
• Lightweight –
Electric: 1.5 HP - 5.0 HP
only 8 pounds!
56C Motor
• Rubber mounting feet
Gas Eng:
for stability
4.0 HP - 6.5 HP Honda
3.0 HP - 6.0 HP B&S /
• Use with either gas
B&S Vanguard engines
or electric direct drive units
• Compact size –
12" W x 19" H x 17" D
• Easy pivot of machines
• Locking or non-locking
• 360 degree swivel
4-031509
Description
565230X
Hand Tote II
126 LANDA
4-031514
Part No.
Description
4-031509
4-031513
4-031514
3" Grey, WaterJet
5" Swivel Caster, SJ Units
5" Swivel Caster, with Brake, SJ Units
Rubber Parts
2-0103
Part No.
4-031513
2-01041
2-0108
2-0107
2-01101
Part No.
Description
2-0103
2-01041
2-0107
2-0108
2-01101
2-01011
1/8" Grommet (Holds Nozzles in Frame)
Foot Pad, Soft, PG
Bellows, Leg (Boot), PG
Bumper Pad, Engine, PG
Handle Grip, 1" Waffle
Vibration Isolator, 5/16"
2-01011
DETERGENTS
Your One Stop Shop for Parts
LANDA Detergents
why detergents are paramount for power washing
LANDA detergents contain the most advanced formulas engineered to be used
with high-pressure cleaning equipment.
Most of the 38 blends contain an exclusive multi-metal corrosion inhibitor
package designed to protect your equipment as well as prevent flash rusting
while cleaning.
Furthermore, the LANDA detergents are biodegradable and most include
a special additive to prevent scale build up.
The detergents come in 5-gallon and 55-gallon containers with blends
engineered to meet the needs of the majority of pressure washer and parts
washer applications.
Cleaners & Degreasers:
The highly concentrated detergents are to be diluted at ratios of up
to 150:1 making the cost-in-use very economical. Mix kits are also available.
All packaging complies with U.S. and Canadian regulations.
STRONG ENOUGH TO POWER AWAY GREASE
L-219 Extra Powerful Degreaser — When the toughest of cleaning jobs requires a highly caustic detergent, L-219
gets the call. This non-toxic cleaner cuts grime, grease and carbon extremely fast and is effective in cleaning everything
from vent hoods and concrete to engines and parts in a soak tank. Dilution: 30:1; 4:1 for vent hoods
L-219
Part No.
Description
Lbs
9-68005*
9-68055*
L-219, Super-Duty Degreaser, 5 gal
L-219, Super-Duty Degreaser, 55 gal
58
632
*Cannot ship via UPS
Dyna-Might Super-Duty Degreaser — A highly concentrated, butyl-based detergent with a precise amount of caustic
to deliver a powerful cleaning punch. Ideal for heavy equipment, repair shops, sidewalks, parking lots, parts degreasing
and exhaust tracks. Biodegradable and phosphate free. Dilution: 128:1
Dyna-Might
Part No.
Description
Lbs
9-32005*
9-32055*
Dyna-Might, Super-Duty Degreaser, 5 gal
Dyna-Might, Super-Duty Degreaser, 55 gal
48
512
*Cannot ship via UPS
PowerEdge Butyl-Based Super-Duty Degreaser — A powerful, highly concentrated degreaser with extra cleaning
ingredients. While it is non-caustic, but butyl-based, it works with the effectiveness of a caustic detergent.
Biodegradable and safe for even fine automotive finishes. Has alcohol for restorative cleaning. Dilution: 150:1
PowerEdge
Part No.
Description
Lbs
9-22005
9-22055
PowerEdge, Super-Duty Degreaser, 5 gal
PowerEdge, Super-Duty Degreaser, 55 gal
46
504
Buckshot Low-Alkalinity Heavy-Duty Degreaser — A highly effective, non-caustic, butyl-based degreaser that
works well with hot or cold water. Biodegradable and safe for use on all metals and painted surfaces, including
engine and vehicles. Also cleans mildew, soap scum and baked on grease. Dilution: 150:1
Part No.
Description
Lbs
9-24005
9-24055
Buckshot, Heavy-Duty Degreaser, 5 gal
Buckshot, Heavy-Duty Degreaser, 55 gal
47
506
Buckshot
Citrus Degreaser — Citrus-Based Degreaser. Uses d-Limonene, a natural product from rinds or peelings of citrus fruit,
that is highly effective for stripping away grease and grime. It is especially popular because it is made from a renewable
resource along with being non-toxic and biodegradable Dilution: 50:1
Part No.
Description
Lbs
9-56005
9-56055
Citrus Degreaser, 5 gal
Citrus Degreaser, 55 gal
44
466
Citrus Degreaser
LANDA
127
DETERGENTS
Cleaners & Degreasers:
STRONG ENOUGH TO POWER AWAY GREASE
Bazooka Non-Butyl Cleaner / Degreaser — A super-strength, highly concentrated non-butyl blend of powerful
ingredients formulated to wet, penetrate and suspend soil, oils and grease for faster, more thorough cleaning
effectiveness. OK on most surfaces, including aluminum, stainless steel, glass, plastic, paint and even fine automotive
paint finishes. Dilution: 100:1
Bazooka
Recycle Detergent:
Part No.
Description
Lbs
9-26005
9-26055
Bazooka, Non-Butyl Degreaser, 5 gal
Bazooka, Non-Butyl Degreaser, 55 gal
48
505
ENGINEERED FOR WASH-WATER RECYCLING SYSTEMS
L-215 Detergent For Water Treatment — All-purpose, non-emulsifying detergent for use in wash-water reclaim systems. It is low-foaming, non-flammable and biodegradable with a high surfactant concentration for removing road film
and grime. Dilution: 64:1 to 80:1; pre-soak for 3 to 5 minutes for extra heavy soil
L-215
Part No.
Description
Lbs
9-67005*
9-67055*
L-215, Recycle Detergent, 5 gal
L-215, Recycle Detergent, 55 gal
48
523
*Cannot ship via UPS
Environ Quick Release Recycle Detergent — Low-foaming, non-caustic, low-phosphate detergent ideal for washwater recycling systems and oil-water separators. Environ’s quick-release surfactant allows oil and grease to be
removed in filtration systems. Biodegradable and safe on painted surfaces. Dilution: 100:1
Part No.
Description
Lbs
9-62005
9-62055
Environ, Recycle Detergent, 5 gal
Environ, Recycle Detergent, 55 gal
46
495
Environ
All Purpose Cleaners:
VERSATILITY TO TACKLE TOUGHEST OF JOBS
L-217 All Purpose Cleaner — Butyl-based, super-duty all purpose detergent quickly dissolves grease, dirt and grime.
It produces a generous foam and rinses easily with water. Safe on most surfaces and applications but not polished
aluminum or galvanized metals. Dilution: 100:1 typically; 40:1 or 20:1 for toughest tasks
Part No.
Description
Lbs
9-63005*
9-63055*
L-217, All Purpose Cleaner, 5 gal
L-217, All-Purpose Cleaner, 55 gal
48
520
*Cannot ship via UPS
L-217
Top Gun All Purpose Cleaner with Alcohol — A high-performance general purpose cleaner formulated to remove
all types of dirt, grit, grease and soap scum. It is non-caustic, non-butyl, low-foaming with alcohol for extra effective
cleaning of painted surfaces. Ideal for cleaning vehicles and building exteriors. Dilution: 120:1
Part No.
Description
Lbs
9-11005
9-11055
Top Gun, All-Purpose Cleaner, 5 gal
Top Gun, All-Purpose Cleaner, 55 gal
45
496
Top Gun
Purple Rain All Purpose Cleaner — A non-caustic, butyl-based, low-foaming detergent engineered to remove grease
and grime, yet can be used safely on painted surfaces, including plastic, metals, aluminum, glass, steel and chrome.
Use with hot or cold water to clean buildings, vehicles, decks. Dilution: 130:1
Purple Rain
128 LANDA
Part No.
Description
Lbs
9-13005
9-13055
Purple Rain, All-Purpose Cleaner, 5 gal
Purple Rain, All-Purpose Cleaner, 55 gal
47
495
DETERGENTS
Your One Stop Shop for Parts
Vehicle Cleaners:
CUTS AWAY DIRT AND GRIME BUT LEAVES THE SHINE
L-9140 Car Wash Cleaner — Unique blend of the latest generation of surfactants, along with water softening agents,
to deliver highly effective penetration and cleaning performance. High-foaming and butyl-based; ideal for pre-soaking
vehicles in car washes. Rinses quickly and cleanly. Dilution: 80:1 for pre-soaking and 180:1 for exterior washing
New
Part No.
Description
Lbs
9-64005
9-64055
L-9140, Car Wash Cleaner, 5 gal
L-9140, Car Wash Cleaner, 55 gal
47
510
L-9140
RoadShow Non-Butyl Vehicle Cleaner — Highly effective all-purpose, non-caustic, non-butyl vehicle wash that
cleans and degreases. Works with hot or cold water. Biodegradable and safe to use on all metals and painted surfaces,
especially formulated to clean cars, trucks, engines and RVs. Dilution: 100:1
Part No.
Description
Lbs
9-31005
9-31055
RoadShow, Vehicle Cleaner, 5 gal
RoadShow, Vehicle Cleaner, 55 gal
47
506
RoadShow
L-9115 Powder All Purpose Vehicle Cleaner — Powdered compound, with buffered alkalinity and a blend of water
softening agents for fast removal of soils and grime. It is biodegradable, solvent-free and very stable in hard water.
Works in car wash systems as well as pressure washers. Dilution: 1 lb. per 5 gallons then apply through the pressure
washer at 20:1
New
Part No.
Description
Lbs
9-65040
9-65400
L-9115, All Purpose Vehicle Cleaner, 40 lb Pail
L-9115, All Purpose Vehicle Cleaner, 400 lb Drum
43
415
L-9115
GrimeCutter™ Brown Soap Vehicle Wash — An extra-strong degreaser with just enough caustic to clean effectively
while displaying the properties and alkalinity of a non-caustic detergent. It is biodegradable and contains no butyl.
Excellent for cleaning carbon stack. Not for fine finish surfaces. Dilution: 50:1
New
GrimeCutter
Part No.
Description
Lbs
9-27005*
9-27055*
GrimeCutter™,
42
451
Vehicle Degreaser, 5 gal
GrimeCutter™, Vehicle Degreaser, 55 gal
*Cannot ship via UPS
Convoy Vehicle Cleaner with Alcohol — A non-butyl, low-foaming, extra-strength, biodegradable detergent
formulated specifically for cleaning vehicles. Safe for all metals with alcohol for restorative cleaning of fine painted
surfaces as well as aluminum, glass, steel and chrome. Use with hot or cold water. Dilution: 120:1
Part No.
Description
Lbs
9-35005
9-35055
Convoy, Vehicle Cleaner, 5 gal
Convoy, Vehicle Cleaner, 55 gal
45
496
Convoy
Highway Butyl-Based Vehicle Cleaner — Extra strong, butyl-based, low-foaming, biodegradable detergent
engineered to clean and degrease simultaneously. Works with hot or cold water and has quick-release properties.
Ideal for use on hard surfaces, such as cars, trucks, engines and RVs. Dilution: 130:1
Part No.
Description
Lbs
9-37005
9-37055
Highway, Vehicle Cleaner, 5 gal
Highway, Vehicle Cleaner, 55 gal
47
495
Highway
Hard Drive Off-Road Vehicle Cleaner — A super-strength, caustic-based detergent formulated to tackle the toughest
of jobs. While it is biodegradable , use caution in applying. May dull the surface of automotive paints. Do not use
on aluminum, magnesium, galvanized metal or finely painted surfaces. Dilution: 50:1
Hard Drive
Part No.
Description
Lbs
9-33005*
9-33055*
Hard Drive, Off-Road Vehicle Cleaner, 5 gal
Hard Drive, Off-Road Vehicle Cleaner, 55 gal
51
550
*Cannot ship via UPS
LANDA 129
DETERGENTS
Vehicle Cleaners:
CUTS AWAY DIRT AND GRIME BUT LEAVES THE SHINE
L-431 — Extra-Tough, Butyl-Based Vehicle Wash. L-431 features a unique combination of emulsifiers and high-alkaline
builders designed to meet the toughest of cleaning jobs. The concentrated, butyl-based formula wets, penetrates and
suspends soil, oils and grease for a especially thorough cleaning. Dilution: 25:1
Part No.
Description
9-66000
L-431 Mix Kit (makes 55 gal.)
Lbs
53
L-431
Rinsing Agents & Wax:
SPECIALTY PRODUCTS FOR VEHICLE CLEANING
Prism Rinsing Agent — A blend of biodegradable wetting agents formulated to break up surface tension of water,
reducing water spotting. Excellent for car washes or rinsing after pressure washing with Landa detergents. Made
for rinsing in hard or soft water. Extremely dilutable. Dilution: 5000:1
Prism
Part No.
Description
Lbs
9-38005
9-38055
Prism, Rinsing Agent, 5 gal
Prism, Rinsing Agent, 55 gal
46
491
TechnoWax Vehicle Wax — Highly concentrated, biodegradable, long-lasting wax designed specifically to enhance
and protect the appearance of any painted surface. Readily biodegradable and user friendly. Works well in hard or
soft water. Dilution rate is only .6 ounces per automobile. Dilution: 2000:1
TechnoWax
Aluminum Brighteners:
Part No.
Description
Lbs
9-39005
9-39055
TechnoWax, Vehicle Wax, 5 gal
TechnoWax, Vehicle Wax, 55 gal
43
462
IDEAL FOR CLEANING ROAD FILM & SMOKE
L-207 One-Step Acid Cleaner — Fast-acting cleaner and aluminum brightener that uses phosphoric acid to clean
and brighten in one step. Designed to remove road film, oxide film and diesel smoke from aluminum trailers and
aircraft. High foam reduces splash back. Dilution: 20:1 or 30:1, depending on soil content
L-207
Part No.
Description
Lbs
9-45005*
9-45055*
L-207, Aluminum Brightener, 5 gal
L-207, Aluminum Brightener, 55 gal
47
509
*Cannot ship via UPS
L-209 One-Step Acid Cleaner Concentrate — An aluminum brightener concentrate with a blend of ammonium
bifluoride and sulfuric acid to chemically clean and brighten in one step. Removes road film, oxide film and diesel
smoke from aluminum trailers. Dilution: 120:1 or 350:1, depending on soil concentration
L-209
Part No.
Description
Lbs
9-43005*
9-43055*
L-209, Aluminum Brightener, 5 gal
L-209, Aluminum Brightener, 55 gal
56
600
*Cannot ship via UPS
Super Nova Aluminum Brightener with Extras — Highly concentrated, non-fuming, acid detergent with extra wetting
agents for the absolute toughest of cleaning jobs, such as road film. Cleans and restores oxidized aluminum.
Removes carbon, grease, oils and diesel smoke. Easy to apply. Does not use hydrofluoric acid. Dilution: 20:1
Super Nova
Part No.
Description
Lbs
9-42005*
9-42055*
Super Nova, Aluminum Brightener, 5 gal
Super Nova, Aluminum Brightener, 55 gal
50
537
*Cannot ship via UPS
Nova Aluminum Brightener — Non-fuming, acid-based cleaner for cleaning and restoring oxidized aluminum.
Contains an acid inhibitor formula for minimizing metal removal. Excellent for removing grease, oil and diesel
smoke. Uses Ammonium Bifluoride, not hydrofluoric acid. Dilution: 20:1
Nova
130 LANDA
Part No.
Description
Lbs
9-44005*
9-44055*
Nova, Aluminum Brightener, 5 gal
Nova, Aluminum Brightener, 55 gal
50
537
*Cannot ship via UPS
DETERGENTS
Your One Stop Shop for Parts
Specialty Cleaners:
FROM CONCRETE CLEANING TO COIL CONDITIONING
L-220 Hood & Vent Cleaner — An extra-high alkaline cleaner formulated for removing grease, grime and dirt
from restaurant vent hoods. Especially effective on grease, fat and soy oils. Biodegradable with rust inhibitor.
Dilution: 100:1 to 20:1, depending on soil concentration
L-220
Part No.
Description
Lbs
9-47005*
9-47055*
L-220, Hood & Vent Cleaner, 5 gal
L-220, Hood & Vent Cleaner, 55 gal
51
553
*Cannot ship via UPS
Matrix Concrete Cleaner — A powerful, highly concentrated concrete cleaner for the toughest of cleaning jobs. It
is non-caustic and butyl-based but works with the effectiveness of a caustic detergent. Biodegradable and safe for
painted surfaces. Formulated for restorative cleaning. Dilution: 150:1
Matrix
Part No.
Description
Lbs
9-71005
9-71055
Matrix, Concrete Cleaner, 5 gal
Matrix, Concrete Cleaner, 55 gal
47
505
BlockBuster Hood and Vent Cleaner — Engineered for the toughest of commercial kitchen cleaning jobs. Highly
concentrated, caustic potash-based formula effectively attacks greasy baked-on and burnt-on food and soil. Use on
kitchen vent hoods and floors. Do not use on aluminum or painted surfaces. Dilution: 50:1
BlockBuster
Part No.
Description
Lbs
9-72005*
9-72055*
BlockBuster, Hood & Vent Cleaner, 5 gal
BlockBuster, Hood & Vent Cleaner, 55 gal
51
550
*Cannot ship via UPS
LazerWash Extra-Strength Cleaner — Highly concentrated blend of non-fuming acid and surfactants formulated to
clean everything from mortar, concrete and rust to diesel smoke and welding smut. Ideal for cleaning building exteriors, but safe to use on glass and aluminum. Biodegradable. Dilution: 10:1
LazerWash
Part No.
Description
Lbs
9-73005*
9-73055*
LazerWash, Extra Strength Cleaner, 5 gal
LazerWash, Extra Strength Cleaner, 55 gal
51
546
*Cannot ship via UPS
Mongoose Coil Conditioner — Inhibited, non-fuming, biodegradable acid cleaner removes rust and hard water
deposits from inside heating coils. For pressure washers and boilers. Mix Ratio: 16:1
Mongoose
Part No.
Description
9-74002*
Mongoose, Coil Conditioner, 12 x 2 lbs
Lbs
28
*Cannot ship via UPS
Landa Phosphatizer — Ideal for Paint Preparation. Landa Phosphatizer is a complete phosphatizing agent that cuts
and removes oil, grease and grime from steel prior to painting. it is a butyl-based, biodegradable cleaner that can
be applied using spray, dip or wipe-on cleaning and phosphatizing methods. It also works well in hard or soft water
and rinses completely . Dilution: Use 1/4 to 2 ounces per gallon of 120°F water, depending on the method of application, the weight of the coating desired and the temperature.
Landa Phosphatizer
Part No.
Description
Lbs
9-78005
9-78055
Landa Phosphatizer, 5 gal
Landa Phosphatizer, 55 gal
51
525
LANDA 131
DETERGENTS
Parts Washer Detergents:
ENGINEERED FOR AQUEOUS CLEANING
MPW-2000 Manual Parts Washer Detergent — An all-purpose, neutral pH, non-foaming, liquid detergent ideally
suited for use in a manual aqueous parts washer. Besides being phosphate-free and biodegradable, the MPW-2000
is safe to use on all metals, painted surfaces and plastic. Mix Ratio: 10:1 light; 5:1 heavy
MPW-2000
Part No.
Description
Lbs
9-54005
9-54055
MPW-2000, Manual Parts Washer Detergent, 5 gal
MPW-2000, Manual Parts Washer Detergent, 55 gal
43
462
Rebel Wash Liquid Manual Parts Washer Detergent — A non-caustic, non-foaming, liquid with corrosion inhibitors
ideal for use in either hot water automotive parts or a parts washer sink. Also it is environmentally friendly — phosphate-free and biodegradable. Safe to use on all metals, painted surfaces and plastic. Mix Ratio: 64:1 light; 10:1 heavy
Rebel Wash
Part No.
Description
Lbs
9-52005
9-52055
Rebel Wash, Liquid Manual Parts Washer Detergent, 5 gal
Rebel Wash, Liquid Manual Parts Washer Detergent, 55 gal
51
550
HyperDrive Parts Washer Detergent — Non-foaming, non-caustic, powder blend ideal for automatic parts washers
because of its unsurpassed multi-metal rust and corrosion inhibitor formula. Excellent for steel, aluminum, copper,
brass, and plastic. Also works in soak tanks and ultrasonic tubs. Mix Ratio: 16:1 light; 4:1 heavy
Hyper Drive
Part No.
Description
Lbs
9-51010
9-51050
9-51100
9-51450
Hyper Drive, Parts Washer Detergent, 4 x 10 lbs
Hyper Drive, Parts Washer Detergent, 50 lbs
Hyper Drive, Parts Washer Detergent, 100 lbs
Hyper Drive, Parts Washer Detergent, 450 lbs
44
52
103
469
L-228 APW Detergent for Soft-Medium Metals — Low-foaming, non-caustic, detergent formulated specifically
for cleaning aluminum and other soft metals and even plastics or rubber. Biodegradable, non-toxic and has no
irritating fumes. Features Landa’s rust inhibitors to prevent oxidation. Mix Ratio: 1/4 - 1/2 lb per gallon water
L-228
Part No.
Description
Lbs
9-69040
9-69400
L-228, APW Detergent, 40 lb Pail
L-228, APW Detergent, 400 lb Drum
43
415
L-229 Heavy-Duty Parts Washer Detergent — A d-limonene-based formula for extra tough cleaning of grease and
grime. With a buffered alkalinity for maximum performance and extended life, excellent for use in all parts washers.
Has a pleasant citrus scent and Landa’s rust and corrosion inhibitors to prevent oxidation.
Mix Ratio: 1/4 - 1/2 lb per gallon water
L-229
Part No.
Description
Lbs
9-46040
9-46400
L-229, Parts Washer Detergent, 40 lb Pail
L-229, Parts Washer Detergent, 400 lb Drum
43
415
Landa Bare-All Paint Stripper is a liquid paint and powder coat remover for use in aqueous parts washers. It is a
specialized blend for removing all types of paint and powder coatings. This biodegradable, alkaline stripper is fast
acting and effective in dissolving stubborn paint and powder coats, including epoxy finishes. It is effective in paint
removal on iron and steel but NOT intended for use on aluminum, magnesium and galvanized metals.
Bare-All
Part No.
Description
Lbs
9-25005
9-25055
Bare-All Paint Stripper, 5-gal
Bare-All Paint Stripper, 55-gal
49
530
Response Vapor Corrosion Inhibitor — Superb, non-foaming agent that protects parts and parts washers from flash
rusting in either liquid or vapor environments. Mix Rate: 1-2 oz. per week
Response
Part No.
Description
9-55001*
9-55005
Response, Vapor Corrosion Inhibitor, 4 x 1 gal
Response, Vapor Corrosion Inhibitor, 5 gal
Lbs
37
46
*[Tip-and-measure 1 gallon containers]
InterFace Defoamer — Fast-acting, biodegradable agent that suppresses foam in all automatic parts washers.
Environmentally safe. Works well in hard or soft water. Dilution: 500:1
InterFace
Part No.
Description
9-53001*
Interface, Defoamer, 4 x 1 gal
*[Tip-and-measure 1 gallon containers]
132 LANDA
Lbs
36
INDEX
Your One Stop Shop for Parts
A
A+ High Pressure Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
A.O. Smith Pressure Washer Motors . . . . . . . . . . . . . . . . . . . . . . . . .105
ABS Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-24
Accumulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Accura High Limit Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 54
Adjustable Flow Thru Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Air Power Sprayers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Air Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
AL Dual Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
All Purpose Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
Aluminum Brighteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Amazing Pocket Reference - 3rd Edition . . . . . . . . . . . . . . . . . . . . . . . .23
Amerimax Injector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
AMP Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Anti-Seize Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
AP Dump Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
AP Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Aqueous Parts Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-15
AR Pumps & Pump Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76-78
AR Unloaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Arrowline Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Automatic Parts Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-15
B
Back Flow Preventor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Baldor Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103-104
Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93-95
Balls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91-92
Banded Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Base Plates for Transformers & Ignitors . . . . . . . . . . . . . . . . . . . . . . .110
Battery Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Beckett Burners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108-109
Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
“Big Boot” Cam Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
Big Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Blower Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Bowl Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119-121, 123-124, 126
Branch Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Briggs & Stratton Engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Broad Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Burner Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Burner Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Burner Control VAC Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Burner Ignitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Burner Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Burner Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Burner Transformers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Burner Tune-Up Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Burners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108-115
Bushing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Bushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 107
C
Cam Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111, 126
Carbon Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Carwash Bay Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Caster Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Ceramic Plungers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Chassis Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125-126
Check Foot Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Check Hose Barbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92-93, 112
Chemical Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Chemical Injectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88-91
Chemical Jug Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Chemical Metering Valves . . . . . . . . . . . . . . . . . . . . . . . . . .88-91, 95-96
Chemical Strainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Chemical Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Chemical Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
CleanCut Fuel Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
Cleaners & Degreasers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127-128
Coil Blow Out Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Coil Insulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Coil Wraps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Coils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Cold Water Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Cold Water Pressure Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
Comet Pumps & Pump Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Comet Unloader Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Connector Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Contact Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Cord Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Cord Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46-49, 68, 81
Couplers Built by Browning or Lovejoy . . . . . . . . . . . . . . . . . . . . . . . .106
Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42, 50, 54-55, 108
Cox Hose Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Crimp Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52, 54
Curtain Walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Cycle Pilot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Cyclone Surface Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
D
Dampener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Degreasers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127-128
Delavan Fuel Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Deluxe Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Detergents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127-132
Diagnostic Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Diaphragm Float Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Diesel Engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Dip Tube Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Dirt Killer Rotating Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Disks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Double Nozzle Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Double Shut-Off Couplers & Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Downstream Chemical Injectors . . . . . . . . . . . . . . . . . . . . . . . . . . .88-91
Draft Diverters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Drain Cocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Drum Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Drum Tool Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Dual Chemical Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Dual Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Dual Trigger Lance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Duct Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Dump Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Duo-Reg Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
E, F
E-Z Start Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Easy Start Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51, 54-55
Electrical Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116-124
Electrical Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Electrode Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Electronic Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Engines & Engine Parts . . . . . . . . . . . . . . . . . . . . . . . . .100-102, 106-107
Exact-A-Flow Pressure Reducer / Injector . . . . . . . . . . . . . . . . . . . . . . .91
Extractors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Extruded Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Fiberglass “Super Handles” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
INDEX
Fiberglass Telescoping Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Filter Funnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53, 55-58
Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37, 46-58
Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Flex Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Flex Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Flex Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Flex Line Bypass Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Flex Wand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Float Balls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Float Tank Inlet Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Float Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
Float Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91-92
Floats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Flow Actuated Unloaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Flow Control Metering Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Flow Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Flow Selector Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Flow Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Flow Thru Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Flue Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Foam Cannon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 68
Foamer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 68
Foot Controlled Pressure Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Foot Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Forged Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Fuel Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Fuel Dip Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Fuel Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56, 58
Fuel Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Fuel Oil Pressure Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Fuel Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Fuel Solenoid Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Fuel Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
Funnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
G
Galvanized Pipe Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Garden Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Garden Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Gas Burner Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Gas Jets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Gas Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Gas Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98-99
Gear Lube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Geared Multiplier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Geared Reduction Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
General Fuel Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
General Pump Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
General Pumps & Pump Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71-75
Generators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
GFCI Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Giant Trigger Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Goff’s Curtain Walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Green-Cap Inline Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Ground Fault Circuit Interrupters (GFCI) . . . . . . . . . . . . . . . . . . . . . . .119
Gun Swivel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25-30, 33-34
Gymatic Unloaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
H, I, J
Hand Tote ll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 28, 32
Hansen Quick Connective Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Hard Rotating Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Hex Close Nipple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Hex Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 54
Hex Double Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Hex Head Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Hex Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Hex Pipe Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Hex Reducing Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Hex Socket Head Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Hi-Lo Injector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
High / Low Variable Angle Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
High Limit Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
High Pressure Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
High Pressure Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
High Pressure Nozzle Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 64
High Pressure Swivels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
High Pressure Unloaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82-88
High Volume Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
High Volume Regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
High Volume Unloader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84, 87
HM Regulator / Unloader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Hobby Gun, Lance & Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33, 40
Hobby Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Hobby Wash Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Honda Engine Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-42
Hose Barbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52-53
Hose Bend Restrictors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Hose Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Hose Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43-45
Hosemaster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Hot Water Pressure Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7
Hour Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98-99
Hudson Float Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Hypro-Style Unloader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Ignition Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Ignitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
In Line Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
Injectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88-91
Inline Can-Type Filters & Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Inline ClearView Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Inline Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-58
Inline Fuel Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56, 58
Insulated Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Insulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Insulation Donuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Insulator Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Integrated Regulator / Unloader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
“Inter-Lube-Red” Gear Lube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Interchangeable Orifices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Interpump / General Pumps & Pump Kits . . . . . . . . . . . . . . . . . . . . .71-75
Iride Trigger Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
J.E. Adams Unloader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Jetter Pulse Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
JIC Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
JIC x Pipe Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Junction Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
K, L
“K” Series Pressure Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Kew Replacement Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Keyed Ignition Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
KIP Fuel Solenoid Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Klemm Fuel Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Kohler Engine Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Lance Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Lance Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28, 32
Lance Nozzle Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-33
LANDA Cyclone Surface Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
LANDA Detergents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127-132
LANDA Flow Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
LANDA Fuel Filter / Water Separator . . . . . . . . . . . . . . . . . . . . . . . . . .58
LANDA Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
LANDA Industrial Sandblasters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
LANDA Parts Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-15
LANDA Pressure Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10
LANDA Pump Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
INDEX
Your One Stop Shop for Parts
LANDA Pump Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
LANDA Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
LANDA Sand Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
LANDA Tuff-Skin™ Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
LANDA Variable Pressure Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
LANDA Water Jet Surface Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Legacy AP Trigger Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Legacy Dual Lance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Legacy Flow Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Legacy Rawhide Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Legacy Revolution Turbo Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Legacy Ultima Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
Line Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Lombardini Engines & Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
LP Conversion Kit for Robert Shaw . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Lube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
M,N.O
Machine Control Cam Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
Magnetic Motor Starter Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Magnetic Motor Starters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Magnetic Starters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
Merchant Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Metering Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88-91, 95-96
Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
MG4000 Series Unloaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Molded Grip Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Mosmatic Turbo Surface Cleaner & Duct Cleaner . . . . . . . . . . . . . . . . . .18
Motor Starters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119, 121
Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100-107, 109
Multi-Fan Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
MV Hi-Lo Turbo Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
MV Hobby Wash Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
MV Lance Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
MV Triple Function Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46-51, 54-55
Non-Marking Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Non-Pivot Hose Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Non-Pivot Mounting Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Nozzle Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Nozzle Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Nozzle Fan Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Nozzle Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Nozzle Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Nozzle Size Selection Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20. 59-68, 112
Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
O-Ring Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Oil Burners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Oil Solenoid Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Open Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Orange 600 & Ribbed PVC Sprayer Hose . . . . . . . . . . . . . . . . . . . . . . .40
Orificed Hose Barb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Orifices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Overload Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
P, Q
PA Float Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
PA Insulated Molded Grip Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
PA Trigger Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
PA Turbo Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Packing & Seal Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Packing Extractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Packing Extractor Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Parker Quick Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Parts Washer Detergents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
Parts Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-15
Phoenix Flow Switch w/ Pilot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Pilot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Pipe Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54-55
Pipe Nipple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Pipe Street Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Pipe Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Pipe Thread Hex Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Piston Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Pit Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Pivot Mounting Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Pivot Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46-49, 53-54, 124
Plungers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Pressure & Temperature Test Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Pressure Actuated Unloaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Pressure Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Pressure Loop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Pressure Reducer / Injector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Pressure Reducing Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Pressure Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82-88
Pressure Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117-118
Pressure Washer Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-24
Pressure Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10
Propane Gas Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Propane Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
PTO Geared Multiplier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Pulleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Pulsar Unloaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Pulse Dampener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Pulse Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Pulse Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Pump Lube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Pump Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Pump Parts & Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Pumps & Pump Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22, 69-81, 111
Push Button & Contact Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
Push Button Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Push-N-Lock Barbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Push-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Push-On Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
PVC Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94-95
PVC Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
PVC Sprayer Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
PVC Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Quick Coupled Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60-61, 63
Quick Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46-49, 68
Quick-Coupled Injectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89-91
R
Racor Filter Funnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Rain Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Rain Suit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
RainTite Switch Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Rapid Reel Swivels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Recycle Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
Reducing Bushing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Reducing Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Reducing Hex Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43-45
Reference / Calculation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
Regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82-88
Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82-88, 114
Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116, 123
Relief Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82-88, 96
Replacement Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Ribbed PVC Sprayer Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Rigid Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Rinsing Agents & Wax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Robin-Subaru Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Robokim Chemical Injectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Robokim Quick-Coupled Chemical Injectors . . . . . . . . . . . . . . . . . . . . .90
Rocker Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Rollover Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Rollover Nozzle Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Rosebud Nozzle Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
INDEX
Rotary Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
Rotating Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63-65
Rotojet Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63-65
Rotojet Soft Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Rotomax Rotating Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Rubber Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Rupture Disks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
S
Safety Pressure Relief Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . .88, 96
Sand Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Sandblast Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Sandblast Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Sandblaster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Sandblasters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-20
Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Seal Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Sewer Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Sewer Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21, 67
Shipping Tape & Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Side Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28, 32
SideWinder Surface Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Siphon Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Skid Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Slip-On Nozzle Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Small Engine Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
Smoke Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
“Snap” Fuel Nozzle Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Soap Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Solenoid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Solenoid Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Solenoid Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Specialty Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
Speedmaster Throttle Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Spray-Flex™ Flex Wand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Sprayer Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Sprayers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Spraying Systems Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Spring Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Square Molded Grip Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Starter Solenoid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Starters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119, 121
Steam Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Steam Lance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Steam Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Steam Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Steel Pipe Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Steel Utility Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Stems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91-92
Step-Down Transformers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
Strain Reliefs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Strainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55, 57
Street Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52, 54-55
Street Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52, 54
Suction Foot Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Super Value Vent Grip Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Superlite SS Dual Lance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Supply Line Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Surface Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-18
Suttner Dual Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Suttner Push & Pull Lance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Suttner Solid Insulated Molded Grip Lances . . . . . . . . . . . . . . . . . . . . .32
Suttner Trigger Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Suttner Turbo Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Switch Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102, 116-121
Swivel Hose Barbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Swivels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44, 49-50
T
Tank Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Tank Screen / Strainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114, 125
Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 53, 124
Tape Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Tee Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52, 54-55
Teflon® Thread Sealing Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Telescoping Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Temperature Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
Temperature Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
The “Engineered” Reusable Couplings . . . . . . . . . . . . . . . . . . . . . . . . .42
“The Big One” Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Thermal Relief Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Thermostats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121-122
Thread Lock Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Throttle Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Thunderdome Flat Surface Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Timax Pressure Regulator Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
Tip-Jet Nozzle System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Toggle Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118, 120
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22, 70, 79-80, 106, 112
Trailers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Transformers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110, 123
Transformers & Ignitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Triple Function Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
TRV Thermal Relief Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Tube Cleaning Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21, 67
Tubes & Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37, 42
Tubing Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Tuff-Flex Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Tuff-Skin™ Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Turbo Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64-65
Twist Seal Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Twist-Type Rollover Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Two-Gun Tee Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
U,V,W,Y
Uninsulated Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Universal “Elektra” Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
Unloader Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Unloader Mounting Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Unloaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82-88
Up Stream Injectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
V-Packing Insertion Tool Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
VAC Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79, 82-97, 110
Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Variable Chemical Injector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Variable Pressure Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29-30
Vehicle Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129-130
Vent Grip Lances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Vinyl Electrical Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Vinyl Skid Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Vinyl Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37, 42
Viper Rotating Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Voltage Regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Voltmaster Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Voltmeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
VRT Unloader Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Wands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-33
Water Broom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Water Jet Surface Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Water-Sweepers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Wax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Wayne Burners & Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108, 126
Whisper Wash Flat Surface Cleaners . . . . . . . . . . . . . . . . . . . . . . . . . .17
Whitewater® Combination Steam Hose . . . . . . . . . . . . . . . . . . . . . . . . .40
Winco AC Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Wire Loom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
X-Jet Long Range Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Y-Trap Strainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
YU High Volume Unloader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Everyone Can Say They’re #1
Only Landa can prove it. For more than a quarter of a century Landa
has established itself as the premier manufacturer of industrial pressure washers
with unrivaled dealer support and product quality, safety and selection.
#1 in Pressure Washer Quality
#1 in Pressure Washer Selection
Landa was among the first in our
Landa’s unrivaled line of 250+ hot-
industry to meet the internationally
and cold-water pres-
recognized ISO-9001 standards for
sure washers, along
quality manufacturing. Today
with automatic
Landa stands alone in number of
parts washers,
patents, awards and design inno-
detergents, replacement
vations. Furthermore, Landa stands
parts and accessories, ensure
firmly behind its products with the
you’ll get the right cleaning
industry’s top warranty program.
solution for every application.
#1 in Pressure Washer Safety
#1 in Dealer Support
Every Landa pressure washer is uniquely deigned with the
Landa’s 250 factory-trained dealers literally have thousands
latest in safety features for maxi-
years of collective experience in pro-
mum owner and operator protec-
viding professional support to pressure
tion. In fact, Landa was the first
washer customers. Each dealer
pressure washer manufacturer to
receives certified training at the factory
certify its entire line to the rigid
on how to protect your investment and
UL-1776 safety standards.
ensure optimum cleaning performance.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising