Bosch | X10 | User's Manual | Bosch X10 User's Manual

VideoJet X10
Network Video Server
en
Installation and Operating Manual
VideoJet X10
Table of Contents | en
3
Table of Contents
1
Preface
7
1.1
About this Manual
7
1.2
Conventions in this Manual
7
1.3
Intended Use
7
1.4
EU Directives
8
1.5
Rating Plate
8
2
Safety Information
9
2.1
Electric Shock Hazard
9
2.2
Installation and Operation
9
2.3
Maintenance and Repair
9
3
Product Description
11
3.1
Scope of Delivery
11
3.2
System Requirements
12
3.3
Overview of Functions
13
3.4
Connections on the Front Panel
16
3.5
Connections on the Rear Panel
17
4
Installation
19
4.1
Preparations
19
4.2
Mounting
19
4.3
Connections
20
4.4
Power On/Power Off
25
4.5
Setup Using the Configuration Manager
25
5
Configuration Using a Web Browser
27
5.1
Connecting
27
5.2
Configuration Menu
29
5.3
Identification
31
5.4
Camera Name
31
5.5
Display Stamping
32
5.6
Password
34
5.7
Language
35
5.8
Date/Time
35
5.9
Time Server
35
5.10
Picture Settings
37
5.11
Encoder Profile
38
5.12
Profile Configuration
40
5.13
Video Input
43
5.14
Audio
44
5.15
JPEG Posting
45
5.16
Storage Medium
47
5.17
iSCSI
48
5.18
Partitioning
51
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
4
en | Table of Contents
VideoJet X10
5.19
Recording Profiles
57
5.20
Recording Scheduler
59
5.21
Alarm Sources
61
5.22
Alarm Connections
62
5.23
VCA
65
5.24
Alarm E-Mail
70
5.25
Alarm Task Editor
72
5.26
Relay Settings
73
5.27
COM1
75
5.28
Network
77
5.29
Multicasting
81
5.30
Encryption
83
5.31
Version Information
85
5.32
Livepage Configuration
86
5.33
System State
89
5.34
Licenses
90
5.35
Maintenance
91
5.36
Function Test
93
6
Operation
95
6.1
Operation with Microsoft Internet Explorer
95
6.2
The LIVEPAGE
6.3
Saving Snapshots
100
6.4
Recording Video Sequences
100
6.5
Running Recording Program
100
6.6
The RECORDINGS Page
101
6.7
Backup
104
6.8
Installing the Player
105
6.9
Hardware Connections Between Video Servers
106
6.10
Operation Using Software Decoders
108
7
Maintenance and Upgrades
109
7.1
Testing the Network Connection
109
7.2
Unit Reset
109
7.3
Repairs
110
7.4
Transfer and Disposal
110
8
Appendix
111
8.1
Troubleshooting
111
8.2
General Malfunctions
112
8.3
Malfunctions with iSCSI Connections
114
8.4
LEDs
115
8.5
Processor Load
116
8.6
Serial Interface
116
8.7
Terminal Block
117
8.8
Communication with Terminal Program
118
9
Glossary
121
V3.0 | 2007.09
97
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
10
Table of Contents | en
5
Specifications
125
10.1
Unit
125
10.2
Protocols/Standards
126
11
Index
127
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
6
en | Table of Contents
V3.0 | 2007.09
VideoJet X10
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
Preface | en
1
Preface
1.1
About this Manual
7
This manual is intended for persons responsible for the installation and operation of the
VideoJet X10. International, national and any regional electrical engineering regulations must
be followed at all times. Relevant knowledge of network technology is required. The manual
describes the installation and operation of the unit.
1.2
Conventions in this Manual
In this manual, the following symbols and notations are used to draw attention to special
situations:
CAUTION!
!
i
1.3
This symbol indicates that failure to follow the safety instructions described may endanger
persons and cause damage to the unit or other equipment.
It is associated with immediate, direct hazards.
NOTICE!
This symbol refers to features and indicates tips and information for easier, more convenient
use of the unit.
Intended Use
The VideoJet X10 network video server transfers video, audio and control signals over data
networks (Ethernet LAN, Internet). There are various memory options for recording the
images captured by the connected camera. The unit is intended for use with CCTV systems.
Various functions can be triggered automatically by incorporating external alarm sensors.
Other applications are not permitted.
In the event of questions concerning the use of the unit which are not answered in this
manual, please contact your sales partner or:
Bosch Sicherheitssyteme GmbH
Robert-Koch-Straße 100
85521 Ottobrunn
Germany
www.bosch-sicherheitssysteme.de
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
8
en | Preface
1.4
VideoJet X10
EU Directives
The VideoJet X10 network video server complies with the requirements of EU Directives 89/
336 (Electromagnetic Compatibility) and 73/23, amended by 93/68 (Low Voltage Directive).
1.5
Rating Plate
For exact identification, the model name and serial number are inscribed on the bottom of the
housing. Please make a note of this information before installation if necessary so as to have it
to hand in case of questions or when ordering spare parts.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
Safety Information | en
2
Safety Information
2.1
Electric Shock Hazard
9
–
Never attempt to connect the unit to any power network other than the type for which it
–
Use only power supply units with UL approval and a power output according to LPS or
is intended.
NEC Class 2.
–
Never open the housing.
–
Never open the housing of the power supply unit.
–
If a fault occurs, disconnect the power supply unit from the power supply and from all
other units.
–
Install the power supply and the unit only in a dry, weather-protected location.
–
If safe operation of the unit cannot be ensured, remove it from service and secure it to
prevent unauthorized operation. In such cases, have the unit checked by Bosch Security
Systems.
Safe operation is no longer possible in the following cases:
–
2.2
if there is visible damage to the unit or power cables,
–
if the unit no longer operates correctly,
–
if the unit has been exposed to rain or moisture,
–
if foreign bodies have penetrated the unit,
–
after long storage under adverse conditions, or
–
after exposure to extreme stress in transit.
Installation and Operation
–
The relevant electrical engineering regulations and guidelines must be complied with at
all times during installation.
–
Relevant knowledge of network technology is required to install the unit.
–
Before installing or operating the unit, make sure you have read and understood the
documentation for the other equipment connected to it, such as cameras. The
documentation contains important safety instructions and information about permitted
uses.
–
Perform only the installation and operation steps described in this manual. Any other
actions may lead to personal injury, damage to property or damage to the equipment.
2.3
Maintenance and Repair
–
Never open the housing of the VideoJet X10. The unit does not contain any userserviceable parts.
–
Never open the housing of the power supply unit. The power supply unit does not contain
any user-serviceable parts.
–
Ensure that all maintenance or repair work is carried out only by qualified personnel
(electrical engineers or network technology specialists).
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
10
en | Safety Information
V3.0 | 2007.09
VideoJet X10
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
Product Description | en
3
Product Description
3.1
Scope of Delivery
i
Bosch Security Systems
–
VideoJet X10 network video server (with or without integrated hard drive)
–
4 terminal blocks
–
Drilling template
–
Quick Installation Guide
–
Product CD with the following content:
–
Quick Installation Guide
–
Manual
–
System Requirements document
–
Further documentation on Bosch Security Systems products
–
Configuration Manager
–
MPEG ActiveX control
–
Player and Archive Player
–
DirectX control
–
Microsoft Internet Explorer
–
Sun JVM
–
Adobe Acrobat Reader
11
NOTICE!
Check that the delivery is complete and in perfect condition. Have your unit checked by Bosch
Security Systems if you detect any damage.
Installation and Operating Manual
V3.0 | 2007.09
12
en | Product Description
3.2
VideoJet X10
System Requirements
3.2.1
General Requirements
–
Computer with Windows 2000 or Windows XP operating system
–
Network access (Intranet or Internet)
–
Screen resolution 1,024 × 768 pixels
–
16- or 32-bit color depth
–
Installed Sun JVM
NOTICE!
i
Also note the information in the System Requirements document on the product CD
supplied. If necessary, you can install the required programs and controls from the product
CD supplied (see Section 3.1 Scope of Delivery, page 11).
You can find notes on using Microsoft Internet Explorer in the online Help in Internet Explorer.
3.2.2
Additional Configuration Requirements
–
Microsoft Internet Explorer (version 6.0 or higher)
or
–
3.2.3
Installed Configuration Manager program (version 1.60 or higher)
Additional Operational Requirements
–
Microsoft Internet Explorer (version 6.0 or higher)
or
–
Receiver software, for example VIDOS (version 3.11 or higher) or Bosch Video
Management System
or
–
MPEG-4 compatible hardware decoder from Bosch Security Systems (for example
–
For playing back recordings: connection to storage medium
VIP XD) as a receiver and connected video monitor
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
3.3
3.3.1
Product Description | en
13
Overview of Functions
Network Video Server
The VideoJet X10 is a compact network video server for a connected video source. It is
primarily designed for encoding video, audio and control data for transfer over an IP network.
With its encoding in the MPEG-4 format, the VideoJet X10 is ideally suited for making existing
analog CCTV cameras IP-compatible and for remote access to digital VCRs and multiplexers.
The use of existing networks means that integration with CCTV systems or local networks can
be achieved quickly and easily.
Two units, a VideoJet X10 as a sender and a VIP XD as a receiver, for example, can create a
standalone system for data transfer without a PC. Video images from a single sender can be
received simultaneously on multiple receivers. Audio signals can also be transmitted from and
to compatible units.
The VideoJet X10 features industrial standard, robust equipment and is therefore equally
suited to stationary as well as mobile use in rail or other vehicles.
3.3.2
Receiver
Compatible MPEG-4 enabled hardware decoders such as VIP XD can be used as receivers.
Computers with decoding software installed, such as VIDOS, or computers with the Microsoft
Internet Explorer Web browser can also be used as receivers.
3.3.3
Video Encoding
The VideoJet X10 uses the MPEG-4 video compression standard. Thanks to efficient encoding,
the data rate remains low even with high image quality and can also be adapted to local
conditions within wide limits.
3.3.4
Dual Streaming
Dual Streaming allows the incoming data stream to be encoded simultaneously according to
two different, individually customized profiles. This feature creates two data streams that can
serve different purposes, for example one for local recording and one optimized for
transmission over the LAN.
3.3.5
Multicast
In suitably configured networks, the multicast function enables simultaneous real-time video
transmission to multiple receivers. The UDP and IGMP V2 protocols must be implemented on
the network for this function.
3.3.6
Encryption
The VideoJet X10 offers a variety of options for protection against unauthorized reading. Web
browser connections can be protected using HTTPS. You can protect the control channels via
the SSL encryption protocol. With an additional license, the user data itself can be encrypted.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
14
en | Product Description
3.3.7
VideoJet X10
Remote Control
For remote control of external units such as pan or tilt heads for cameras or motorized zoom
lenses, control data is transmitted via the VideoJet X10's bidirectional serial interface. This
interface can also be used to transmit transparent data.
3.3.8
Tamper Detection and Motion Detectors
The VideoJet X10 offers a wide range of configuration options for alarm signaling in the event
of tampering with the connected camera. An algorithm for detecting movement in the video
image is also part of the scope of delivery and can optionally be extended to include special
video analysis algorithms.
3.3.9
Snapshots
Individual video images (snapshots) can be called up from the VideoJet X10, stored on the
computer's hard drive or displayed in a separate browser window in JPEG format.
3.3.10
Recordings
Various local memory options enable the VideoJet X10 to be used as a digital VCR. The
VideoJet X10 supports ANR technology, which guarantees seamless recording without gaps
via VIDOS-NVR, even during network failures. A connection to an appropriately configured
iSCSI system enables long-term recordings with high image quality over the network.
3.3.11
Backup
A function for storing the video images displayed on the hard drive of your computer is
available on the LIVEPAGE as well as on the RECORDINGS page. Video sequences can be
stored by means of a mouse click and can be redisplayed using the Player supplied as part of
the scope of delivery.
3.3.12
Integrated Network Switch
The integrated switch functionality of the VideoJet X10 permits the ETH 1, ETH 2 and SFP
interfaces to be used alternatively, redundantly or for cascading other units.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
3.3.13
Product Description | en
15
Summary
The VideoJet X10 offers the following main functions:
–
Video and data transmission over IP data networks
–
Dual Streaming function for the encoder for simultaneous encoding with two individually
–
Multicast function for simultaneous image transmission to multiple receivers
–
One analog BNC composite video input (PAL/NTSC)
definable profiles
–
Video encoding to international standard MPEG-4
–
Two redundant integrated Ethernet ports (10/100 Base-T)
–
SFP slot for mini-GBIC modules (1 Gbps)
–
Integrated switch functionality
–
CF slot for CompactFlash cards of up to 8 GB for local storage
–
Optional, integrated robust hard drive for local storage
–
USB interfaces for future WAN or WLAN connections
–
Transparent, bidirectional data channel via RS232/RS422/RS485 serial interface
–
Configuration and remote control of all internal functions via TCP/IP, also secured via
HTTPS
Bosch Security Systems
–
Password protection to prevent unauthorized connection or configuration changes
–
Extensive, flexible storage options
–
Four alarm inputs and four relay outputs
–
Built-in video sensor for motion and tamper alarms
–
Event-controlled automatic connection
–
Convenient maintenance via uploads
–
Flexible encryption of control and data channels
–
Authentication according to international standard 802.1x
–
Transmission and receipt of audio signals
–
Bidirectional audio (mono) for line connections
–
Audio encoding to international standard G.711
Installation and Operating Manual
V3.0 | 2007.09
16
en | Product Description
3.4
VideoJet X10
Connections on the Front Panel
1
USB 1/2 interfaces
for future expansion of functions
2
Video In video input
BNC socket for connecting the video source
3
Audio In audio line input
3.5 mm stereo socket for connecting an audio line input signal
4
Audio Out audio line output
3.5 mm stereo socket for connecting an audio line output signal
5
Connect LED
flashes green when the unit is connected to a video
6
HDD LED
flashes orange when hard drive activity is detected
(only on units with a hard drive installed)
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
3.5
Product Description | en
17
Connections on the Rear Panel
7
ETH 1 RJ45 socket
for connecting to an Ethernet LAN (local network), 10/100 MBit Base-T
8
ETH 1 LED
lights up yellow when the unit is connected to the network via ETH 1
9
ETH 2 RJ45 socket
for a redundant connection to the network or to an iSCSI system
10
ETH 2 LED
lights up yellow when the unit is connected to the network via ETH 2
11
Terminal block
for alarm inputs, relay outputs, serial interface and power supply
12
Power On LED
lights up green when ready for operation
13
Factory reset button
to restore factory default settings
14
Compact Flash slot
for a CF card type I or type II
15
SFP LED
lights up yellow when the unit is connected via SFP
16
SFP slot
for mini-GBIC module
i
Bosch Security Systems
NOTICE!
For more information about the LEDs, see Abschnitt 8.4 LEDs, Seite 115.
For terminal block assignment, see Abschnitt 8.7 Terminal Block, Seite 117.
Installation and Operating Manual
V3.0 | 2007.09
18
en | Product Description
V3.0 | 2007.09
VideoJet X10
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
Installation | en
4
Installation
4.1
Preparations
19
The VideoJet X10 features industrial standard equipment and is therefore suitable for both
stationary installation and mobile installation in vehicles.
CAUTION!
The unit is intended for use indoors or in housings.
Select a suitable location for installation that guarantees to meet the environmental
!
conditions. The ambient temperature must be between –30 and +60 °C (–22 and +140 °F).
The relative humidity must not exceed 95%.
The VideoJet X10 generates heat during operation, so you should ensure that there is
adequate ventilation and enough clearance between the unit and heat-sensitive objects or
equipment.
Please ensure the following installation conditions:
–
Do not install the unit close to heaters or other heat sources. Avoid locations exposed to
direct sunlight.
–
Allow sufficient space for running cables.
–
Ensure that the unit has adequate ventilation.
–
When making connections, use only the cables supplied or use appropriate cables
immune to electromagnetic interference.
–
Position and run all cables so that they are protected from damage, and provide
–
Avoid impacts, blows and severe vibrations that exceed the specification limits (see
adequate cable strain relief where needed.
Abschnitt 10 Specifications, Seite 125), as these can irreparably damage the unit.
4.2
Mounting
The VideoJet X10 can be permanently mounted to walls, below ceilings or other load-bearing
locations using the four drillings in the unit's base.
CAUTION!
The front panel of the VideoJet X10 (video input) must not be pointing upwards, as internal
heat dissipation is not guaranteed in this position. All other installation positions are
permitted.
!
Make sure that the mounting location (for example wall or ceiling) can reliably hold the unit.
The load bearing capacity must be adequate for four times the weight of the unit.
For mounting on metal, use screws with the following minimum specification:
M4 × 8, 8.8, DIN ISO 4017.
For mounting on concrete, use screws with the following minimum specification:
M4 × 40 mm (1.57 in) and 6 mm (0.23 in) plastic dowels, for example fischer S4, type 50106.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
20
en | Installation
VideoJet X10
4.3
Connections
4.3.1
Camera
You can connect a video source to the VideoJet X10. Any cameras and other video sources
that produce a standard PAL or NTSC signal are suitable.
1.
Connect the camera or another video source to the BNC Video In socket using a video
cable (75 Ohm, BNC plug).
2.
If the video signal is not looped through, termination is performed by a software setting if
necessary (see Abschnitt 5.13 Video Input, Seite 43).
4.3.2
Audio Connections
The VideoJet X10 has two audio ports for audio line signals.
The audio signals are transmitted two-way and in sync with the video signals. As a result, you
can connect a speaker or door intercom system at the destination point, for example. The
following specifications should be complied with in all cases.
1 × Line In:
Impedance 9 kOhm typ., 5.5 Vp-p max. input voltage
1 × Line Out:
Impedance 10 kOhm typ., 3.0 Vp-p max. output voltage,
impedance 16 Ohm min., 1.7 Vp-p max. output voltage
The stereo plugs must be connected as follows:
Contact
Line In function
Line Out function
Tip
Channel 1 (camera 1)
Channel 1 (camera 1)
Middle ring
–
–
Lower ring
Ground
Ground
1.
Connect an audio source with line level to the Audio In socket of the VideoJet X10 with a
3.5 mm stereo plug.
2.
Connect a unit with line-in connection to the Audio Out socket of the VideoJet X10 with a
3.5 mm stereo plug.
4.3.3
Network
You can connect the VideoJet X10 to a 10/100 Base-T network using a standard UTP
category 5 cable with RJ45 plugs. The second Ethernet interface can be used to create a
redundant connection to the network.
i
NOTICE!
You cannot create a connection to a second network.
1.
2.
Connect the VideoJet X10 to the network via the ETH 1 socket.
Connect the VideoJet X10 to a redundant switch or hub on the same network via the
ETH 2 socket.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
4.3.4
Installation | en
21
SFP Slot
You can establish an additional network connection by inserting a mini-GBIC module into the
SFP slot for example via fiber optic cables (OF).
!
4.3.5
CAUTION!
Only laser class 1 transceivers are approved for use in the VideoJet X10.
Use only approved modules.
Direct iSCSI Connection
You can connect the VideoJet X10 directly to an iSCSI system via one of the network
interfaces. For ETH 1 or ETH 2 connections, use a UTP category 5 network cable with RJ45
plugs.
i
4.3.6
NOTICE!
You can obtain a list of compatible iSCSI systems from your supplier or directly from Bosch
Security Systems. This list is constantly being updated and extended.
CF Slot
You can insert a type I or II CompactFlash card into the Compact Flash slot to enable
recordings to be saved locally. CF cards are the ideal solution for shorter storage times and
temporary recordings, for example alarm recordings or local buffering in the event of network
interruptions.
The VideoJet X10 supports high-performance CF cards with a storage capacity of up to 8 GB.
i
NOTICE!
You can obtain a list of compatible CF cards from your supplier or directly from Bosch
Security Systems. This list is constantly being updated and extended.
Playing back recordings is also possible using a different VideoJet X10, a VideoJet X20 or a
VideoJet X40.
CAUTION!
!
Bosch Security Systems
Setting up partitions clears all existing data from the card.
You should therefore check whether the CF card contains any data that needs to be backed up
before it is inserted.
1.
Carefully slide the CF card, top side down, into the slot as far as it will go.
2.
To remove the CF card, push the eject button to its right and then take out the card.
Installation and Operating Manual
V3.0 | 2007.09
22
en | Installation
4.3.7
VideoJet X10
Data Interface
The bidirectional data interface is used to control units connected to the VideoJet X10, for
example a dome camera with motorized lens. The connection supports the RS232, RS422 and
RS485 transmission standards.
The VideoJet X10 offers the serial interface via the orange terminal block (see
Abschnitt 8.7 Terminal Block, Seite 117).
The range of controllable equipment is expanding constantly. The manufacturers of the
relevant equipment provide specific information on installation and control.
CAUTION!
!
Please take note of the appropriate documentation when installing and operating the unit to
be controlled.
The documentation contains important safety instructions and information about permitted
uses.
i
4.3.8
NOTICE!
A video connection is necessary to transmit transparent data.
Alarm Inputs
The VideoJet X10 has four alarm inputs on the orange terminal block (see
Abschnitt 8.7 Terminal Block, Seite 117). The alarm inputs are used to connect to external
alarm devices such as door contacts or sensors. When configured appropriately, an alarm
device can, for example, trigger the VideoJet X10 to automatically establish a connection with
a remote station.
A zero potential make contact or switch can be used as the actuator.
i
NOTICE!
If possible, use a bounce-free contact system as the actuator.
X
Connect the lines to the appropriate terminals on the orange terminal block (IN1 to IN4)
and check that the connection is secure.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
4.3.9
Installation | en
23
Relay Outputs
The VideoJet X10 has four relay outputs for switching external units such as lamps or alarm
sirens. You can operate these relay outputs manually while there is an active connection to
the VideoJet X10. The outputs can also be configured to automatically activate sirens or other
alarm units in response to an alarm signal. The relay outputs are also located on the orange
terminal block (see Abschnitt 8.7 Terminal Block, Seite 117).
!
CAUTION!
A maximum load of 30 V and 2 A may be applied to the relay contacts.
X
Connect the lines to the appropriate terminals on the orange terminal block (R1 to R4)
and check that the connection is secure.
4.3.10
Remote Indication of the Connection Status
When the VideoJet X10 is connected to a video, the Connect LED on the front panel of the
unit flashes. The LED also provides information on the operational state of the unit and signals
a unit defect (see Abschnitt 8.4 LEDs, Seite 115).
You can connect an additional two-color LED to the VideoJet X10 as a remote indicator. This
provides the same information as the integrated Connect LED. A remote indicator can be
useful if the VideoJet X10 is installed at a location that is difficult to access or see, for
example in a cable duct or on top of a mast. Just like the integrated LED, the remote indicator
LED should also light up red and green in order to avoid confusion.
Please comply with the following specifications and the connection diagram:
Voltage between RM1 and RM2
3.3 V DC max.
Current between RM1 and RM2
25 mA max.
Source resistance
140 Ohm typ.
1.
Connect the LED lines to the appropriate terminals on the orange terminal block (RM1
and RM2) and check that the connection is secure.
2.
Check that the signals on the Connect LED on the VideoJet X10 and the remote indicator
LED correspond.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
24
en | Installation
4.3.11
VideoJet X10
Backup Power Supply
When used in mobile vehicles (for example public transport), the VideoJet X10 is usually
switched on when the vehicle is started with the ignition key. If the ignition is switched off,
the power supply to the unit is also stopped. To keep the internal clock running when the
engine is off, you can connect the VideoJet X10 directly to the car battery via the BP and GND
contacts. The correct time is crucial for evaluating local recordings.
!
CAUTION!
Connect only batteries with the following specification: 10 to 30 V DC, 50 Ah max.,
12/24 V continuous flow.
1.
Connect the + (plus) line on the car battery to the BP terminal on the orange terminal
block.
2.
Connect the – (minus) line on the car battery to the GND terminal on the orange terminal
block.
3.
V3.0 | 2007.09
Now check that the connections are secure.
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
4.4
Installation | en
25
Power On/Power Off
4.4.1
Power Supply
The VideoJet X10 does not have a power switch. Power is supplied via a separate unit.
Connect the VideoJet X10 to the power supply unit and plug this into the mains. The unit is
now ready for use. The VideoJet X10 does not come supplied with a power supply unit.
CAUTION!
Use only power supply units with UL approval and a power output according to LPS or
!
NEC Class 2.
Where necessary, use suitable equipment to ensure that the power supply is free from
interference such as voltage surges, spikes or voltage drops.
Do not connect the VideoJet X10 to the power supply until all other connections have been
made.
1.
Plug the terminal block with the PSU cable connected into the orange socket on the
VideoJet X10.
2.
Connect the power supply unit to the mains. The VideoJet X10 is ready for use as soon as
the Connect LED changes from a red light, indicating the start-up procedure, to a green
light.
If your network connection has been set up correctly, the yellow ETH 1 or ETH 2 LED will also
light up. A flashing ETH 1 or ETH 2 LED signals that data packages are being transmitted over
the network.
4.5
Setup Using the Configuration Manager
The Configuration Manager program can be found on the product CD contained in the scope
of delivery. This program allows you to implement and set up new video servers in the
network quickly and conveniently.
i
4.5.1
NOTICE!
Using the Configuration Manager to set all parameters in the VideoJet X10 is an alternative to
configuration by means of a Web browser, as described in chapter 5 of this manual.
Installing the Program
1.
2.
Insert the CD into the computer's CD-ROM drive.
If the CD does not start automatically, open the Configuration Manager directory using
Windows Explorer and double-click Setup.exe.
3.
Bosch Security Systems
Follow the on-screen instructions.
Installation and Operating Manual
V3.0 | 2007.09
26
en | Installation
4.5.2
VideoJet X10
Configuring the VideoJet X10
You can start the Configuration Manager immediately after installation.
1.
Double-click the icon on the desktop or start the program via the Start menu. After the
program has started, the network is immediately searched for compatible video servers.
2.
You can start the configuration if a VideoJet X10 is shown in the list in the left section of
the window. To do this, click the entry for the unit.
3.
Click the Network tab in the right section of the window. The current network settings
are displayed.
4.
In the IP address field, enter the required IP address (for example 192.168.0.10) and
click the Set button at the bottom right of the window. The new IP address is valid the
next time you start the unit.
5.
i
4.5.3
If required, enter a new subnet mask and additional network data.
NOTICE!
You must reboot to activate the new IP address, a new subnet mask or a gateway address.
Reboot
You can trigger the reboot directly with the assistance of the Configuration Manager.
X
Right-click the entry for the unit in the list in the left section of the window and select the
Reset command from the context menu.
4.5.4
Additional Parameters
You can check and set additional parameters with the assistance of the Configuration
Manager. You can find detailed information on this in the documentation for this program.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
Configuration Using a Web Browser | en
5
Configuration Using a Web Browser
5.1
Connecting
27
The integrated HTTP server in the VideoJet X10 offers you the option of configuring the unit
over the network with a Web browser. This option is an alternative to configuration using the
Configuration Manager program and is considerably richer in function and more convenient
than configuration using the terminal program.
5.1.1
System Requirements
–
Computer with Windows 2000 or Windows XP operating system
–
Network access (Intranet or Internet)
–
Microsoft Internet Explorer (version 6.0 or higher)
–
Screen resolution 1,024 × 768 pixels
–
16- or 32-bit color depth
–
Installed Sun JVM
NOTICE!
i
Also note the information in the System Requirements document on the product CD
supplied. If necessary, you can install the required programs and controls from the product
CD supplied (see Abschnitt 3.1 Scope of Delivery, Seite 11).
You can find notes on using Microsoft Internet Explorer in the online Help in Internet Explorer.
5.1.2
Installing MPEG ActiveX
To allow the live video images to be played back, suitable MPEG ActiveX software must be
installed on the computer. If necessary, you can install the program from the product CD
supplied.
1.
Insert the product CD into the computer's CD-ROM drive. If the CD does not start
automatically, open the root directory of the CD in Windows Explorer and double-click
MPEGAx.exe.
2.
Bosch Security Systems
Follow the on-screen instructions.
Installation and Operating Manual
V3.0 | 2007.09
28
en | Configuration Using a Web Browser
5.1.3
VideoJet X10
Establishing the Connection
The VideoJet X10 must be assigned a valid IP address to operate on your network.
The following default address is preset at the factory: 192.168.0.1
1.
2.
Start the Web browser.
Enter the VideoJet X10's IP address as the URL. The connection is established and after a
short time you will see the LIVEPAGE with the video image.
5.1.4
Maximum Number of Connections
If you do not connect, the unit may have reached its maximum number of connections.
Depending on the unit and network configuration, each VideoJet X10 can have up to 25 Web
browser connections or up to 50 connections via VIDOS or Bosch Video Management System.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.1.5
Configuration Using a Web Browser | en
29
Protected VideoJet X10
If the VideoJet X10 is password protected against unauthorized access, the Web browser
displays a corresponding message and prompts you to enter the password when you attempt
to access protected areas.
i
NOTICE!
The VideoJet X10 offers the option to limit the extent of access using various authorization
levels (see Section 5.6 Password, page 34).
1.
Enter the user name and associated password in the corresponding text fields.
2.
Click OK. If the password is entered correctly, the Web browser displays the page that
was called up.
5.1.6
Protected Network
If a RADIUS server is employed in the network for managing access rights (802.1x
authentication), the VideoJet X10 must be configured accordingly, otherwise no
communication is possible.
To configure the unit, you must connect the VideoJet X10 directly to a computer using a
network cable. This is because communication via the network is not enabled until the
Identity and Password parameters have been set and successfully authenticated (see
Section 5.28.17 Authentication, page 80).
5.2
Configuration Menu
The SETTINGS page provides access to the configuration menu, which contains all the unit's
parameters arranged in groups.
You can view the current settings by opening one of the configuration screens. You can change
the settings by entering new values or by selecting a predefined value from a list field.
All parameter groups are described in this chapter in the order in which they are listed in the
configuration menu, from the top of the screen to the bottom.
!
CAUTION!
The settings in the configuration menu should only be processed or modified by expert users
or system support personnel.
All settings are stored in the VideoJet X10's memory so that they are retained even if the
power supply is interrupted.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
30
en | Configuration Using a Web Browser
5.2.1
VideoJet X10
Starting Configuration
X
Click the SETTINGS link in the upper section of the window. The Web browser opens a
new page with the configuration menu.
5.2.2
Navigation
1.
Click one of the menu items in the left window margin. The corresponding submenu is
displayed.
2.
5.2.3
Click one of the entries in the submenu. The Web browser opens the corresponding page.
Making Changes
Each configuration screen shows the current settings. You can change the settings by entering
new values or by selecting a predefined value from a list field.
X
After each change, click Set to save the change.
CAUTION!
!
Save each change with the associated Set button.
V3.0 | 2007.09
Installation and Operating Manual
Clicking the Set button saves the settings only in the current field. Changes in any other fields
are ignored.
Bosch Security Systems
VideoJet X10
Configuration Using a Web Browser | en
5.3
Identification
5.3.1
Unit name
31
You can give the VideoJet X10 a name to make it easier to identify. The name makes the task
of administering multiple units in larger video monitoring systems easier, for example using
the VIDOS or Bosch Video Management System programs.
The unit name is used for the remote identification of a unit, in the event of an alarm for
example. For this reason, enter a name that makes it as easy as possible to quickly identify the
location.
CAUTION!
!
5.3.2
Do not use any special characters, for example &, in the name.
Special characters are not supported by the system's internal recording management and may
therefore result in the Player or Archive Player being unable to play back the recording.
Unit ID
Each VideoJet X10 should be assigned a unique identifier that you can enter here as an
additional means of identification.
5.4
Camera Name
The camera name makes it easier to identify the remote camera location, in the event of an
alarm for example. It will be displayed in the video screen if configured to do so (see
Section 5.5.1 Camera name stamping, page 32). The camera name makes the task of
administering cameras in larger video monitoring systems easier, for example using the VIDOS
or Bosch Video Management System programs.
5.4.1
Camera 1
Enter a unique, unambiguous name for the camera in this field.
CAUTION!
!
Bosch Security Systems
Do not use any special characters, for example &, in the name.
Special characters are not supported by the system's internal recording management and may
therefore result in the Player or Archive Player being unable to play back the recording.
Installation and Operating Manual
V3.0 | 2007.09
32
en | Configuration Using a Web Browser
5.5
VideoJet X10
Display Stamping
Various overlays or "stamps" in the video image provide important supplementary information.
These overlays can be enabled individually and are arranged on the image in a clear manner.
5.5.1
Camera name stamping
This field sets the position of the camera name overlay. It can be displayed at the Top, at the
Bottom or at a position of your choice that you can then specify using the Custom option. Or
it can be set to Off for no overlay information.
1.
2.
Select the desired option from the list.
If you select the Custom option, additional fields are displayed where you can specify the
exact position (Position (XY)).
3.
5.5.2
In the Position (XY) fields, enter the values for the desired position.
Time stamping
This field sets the position of the time overlay. It can be displayed at the Top, at the Bottom or
at a position of your choice that you can then specify using the Custom option. Or it can be
set to Off for no overlay information.
1.
Select the desired option from the list.
2.
If you select the Custom option, additional fields are displayed where you can specify the
exact position (Position (XY)).
3.
5.5.3
In the Position (XY) fields, enter the values for the desired position.
Alarm mode stamping
Select On to display a text message overlay in the image in the event of an alarm. It can be
displayed at a position of your choice that you can then specify using the Custom option. Or it
can be set to Off for no overlay information.
1.
Select the desired option from the list.
2.
If you select the Custom option, additional fields are displayed where you can specify the
exact position (Position (XY)).
3.
V3.0 | 2007.09
In the Position (XY) fields, enter the values for the desired position.
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.5.4
Configuration Using a Web Browser | en
33
Alarm message
Enter the message to be displayed in the image in the event of an alarm. The maximum text
length is 31 characters.
5.5.5
Video watermarking
Select On if you wish the transmitted video images to be "watermarked". After activation, all
images are marked with a green W. A red W indicates that the sequence (live or saved) has
been manipulated.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
34
en | Configuration Using a Web Browser
5.6
VideoJet X10
Password
A VideoJet X10 is generally protected by a password to prevent unauthorized access to the
unit. You can use different authorization levels (User name) to limit access.
NOTICE!
i
Proper password protection is only guaranteed when all higher authorization levels are also
protected with a password. If a live password is assigned, for example, a service and a user
password must also be set. When assigning passwords, you should therefore always start
from the highest authorization level, service, and use different passwords.
5.6.1
User name
The VideoJet X10 operates with three user names: service, user and live, which correspond
to different authorization levels.
The service user name is the highest authorization level. After entering the correct password,
this user name allows you to use all the functions of the VideoJet X10 and change all
configuration settings.
The user user name is the middle authorization level. You use it to operate the unit and also to
control cameras, for example, but you cannot change the configuration.
The live user name is the lowest authorization level. It can only be used to view the live video
image and switch between the different live image displays.
5.6.2
Password
You can define and change a separate password for each user name if you are logged in as
service or if the unit is not password protected.
Enter the password for the selected user name here.
5.6.3
Confirm password
Enter the new password a second time to eliminate typing mistakes.
i
V3.0 | 2007.09
NOTICE!
The new password is only saved when you click the Set button. You should therefore click the
Set button immediately after entering and confirming a password, even if you also wish to
subsequently assign a password to another user name.
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.7
5.7.1
Configuration Using a Web Browser | en
35
Language
Website language
Select the language for the user interface here.
5.8
5.8.1
Date/Time
Date format
Select your required date format.
5.8.2
Unit date/Unit time
If there are multiple units operating in your system or network, it is important to synchronize
their internal clocks. For example, it is only possible to identify and correctly evaluate
simultaneous recordings when all units are operating on the same time.
1.
Enter the current date. Since the unit time is controlled by the internal clock, there is no
need to enter the day of the week – it is added automatically.
2.
Enter the current time or click the Synchr. PC button to copy your computer's system
time to the VideoJet X10.
5.9
Time Server
The VideoJet X10 can receive the time signal from a time server using various time server
protocols, and then use it to set the internal clock. The unit polls the time signal automatically
once every minute.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
36
en | Configuration Using a Web Browser
5.9.1
VideoJet X10
Unit time zone
Select the time zone in which your system is located.
5.9.2
Daylight saving time
The internal clock can switch automatically between normal and daylight saving time (DST).
The unit already contains the data for DST switch-overs up to the year 2015. You can use
these data or create alternative time saving data if required.
i
NOTICE!
If you do not create a table, there will be no automatic switching. When changing and clearing
individual entries, remember that two entries are usually related to each other and dependent
on one another (switching to summer time and back to normal time).
1.
First check whether the correct time zone is selected. If it is not correct, select the
appropriate time zone for the system, and click the Set button.
2.
3.
Click the Details button. A new window will open and you will see the empty table.
Select the region or the city which is closest to the system's location from the list field
below the table.
4.
Click the Generate button to generate data from the database in the unit and enter it into
the table.
5.
Make changes by clicking an entry in the table. The entry is selected.
6.
Clicking the Delete button will remove the entry from the table.
7.
Select other values from the list fields below the table to change the entry. Changes are
made immediately.
8.
If there are empty lines at the bottom of the table, for example after deletions, you can
add new data by marking the row and selecting required values from the list fields.
9.
5.9.3
Now click the OK button to save and activate the table.
Time server IP address
Enter the IP address of a time server.
5.9.4
Time server type
Select the protocol that is supported by the selected time server. Preferably, you should
select the SNTP server as the protocol. This supports a high level of accuracy and is required
for special applications and subsequent function extensions.
Select Time server for a time server that works with the protocol RFC 868.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.10
Configuration Using a Web Browser | en
37
Picture Settings
You can set the video image of the camera to suit your requirements. The current video image
is displayed in the small window next to the slide controls as confirmation. Your changes are
effective immediately.
5.10.1
1.
Move the slide control to the required position.
2.
Click Default to reset all settings to their default value.
Contrast (0...255)
You can use this function to adapt the contrast of the video image to your working
environment.
5.10.2
Saturation (0...255)
You can use this function to adjust the color saturation so as to make the reproduction of
colors on your monitor as realistic as possible.
5.10.3
Brightness (0...255)
You can use this function to adapt the brightness of the video image to your working
environment.
5.10.4
Low-pass filter (0...255)
You can use this function to filter very fine noise from the image. This reduces and optimizes
the bandwidth necessary for image transmission over the network. The image resolution may
be impaired.
The higher the value set with the slide control, the flatter the image signal. Check your setting
in the image window next to the slide controls.
Also observe the processor load indicator that appears in the top left of the window near the
unit name (see Abschnitt 8.5 Processor Load, Seite 116).
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
38
en | Configuration Using a Web Browser
5.11
VideoJet X10
Encoder Profile
For encoding the video signal you can select two profiles and change the presets for the
profiles.
You can adapt the MPEG-4 data transmission to the operating environment (for example
network structure, bandwidth, data load). To this end, the VideoJet X10 simultaneously
generates two data streams (Dual Streaming). You can select the compression settings of
these data streams individually, for example one setting for transmissions to the Internet and
one for LAN connections.
i
NOTICE!
The settings must be made individually for each stream.
Pre-programmed profiles are available, each giving priority to different perspectives.
–
Profile 1: Low bandwidth (CIF)
High quality for low bandwidth connections,
resolution 352 × 288/240 pixels
–
Profile 2: Low delay (2/3 D1)
High quality with low delay, resolution 464 × 576/480 pixels
–
Profile 3: High resolution (4CIF/D1)
High resolution for high bandwidth connections,
resolution 704 × 576/480 pixels
–
Profile 4: DSL
For DSL connections with 500 kbps, resolution 352 × 288/240 pixels
–
Profile 5: ISDN (2B)
For ISDN connections via two B-channels, resolution 352 × 288/240 pixels
–
Profile 6: ISDN (1B)
–
Profile 7: Modem
For ISDN connections via one B-channel, resolution 352 × 288/240 pixels
For analog modem connections with 20 kbps, resolution 352 × 288/240 pixels
–
Profile 8: GSM
For GSM connections at 9,600 baud, resolution 176 × 144/120 pixels
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.11.1
Configuration Using a Web Browser | en
39
Active profile
Here you can select the desired profile for each of the two streams. You will see a preview for
each data stream in the right section of the window. The preview of the data stream currently
selected is marked by a green frame. Above the previews, various additional items of
information regarding data transmission are displayed and continually updated.
i
5.11.2
1.
Click a tab at the bottom to select the associated stream.
2.
Select the desired setting from the list.
NOTICE!
Stream 2 is always transmitted for alarm connections and automatic connections. Bear this
fact in mind when assigning the profile.
Preview for
Select which video data stream should be displayed in the previews. You can deactivate the
display of the video images if the performance of the computer is affected too strongly by the
decoding of the data streams.
Check the box for the required data stream.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
40
en | Configuration Using a Web Browser
5.12
VideoJet X10
Profile Configuration
You can change individual parameter values within a profile and you can also change the
name. You can switch between profiles by clicking the appropriate tabs.
CAUTION!
!
i
5.12.1
The profiles are rather complex. They include a large number of parameters that interact with
one another, so it is generally best to use the default profiles.
Change the profiles only once you are fully familiar with all the configuration options.
NOTICE!
All parameters combine to make up a profile and are dependent on one another. If you enter a
setting that is outside the permitted range for a particular parameter, the nearest permitted
value will be substituted when the settings are saved.
Profile name
You can enter a new name for the profile here. The name is then displayed in the list of
available profiles in the Active profile field.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.12.2
Configuration Using a Web Browser | en
41
Target data rate
You can limit the data rate for the VideoJet X10 to optimize utilization of the bandwidth in
your network. The target data rate should be set according to the desired picture quality for
typical scenes with no excessive motion.
For complex images or frequent changes of image content due to frequent movements, this
limit can be temporarily exceeded up to the value you enter in the Maximum data rate field.
5.12.3
Encoding interval
The figure selected here determines the interval at which images are encoded and
transmitted. For example, entering 4 means that only every fourth image is encoded, the
following three are skipped — this can be particularly advantageous with low bandwidths. The
image rate in ips (images per second) is displayed next to the text field.
5.12.4
Video resolution
Here you can select the desired resolution for the MPEG-4 video image. The following
resolutions are available:
–
QCIF
176 × 144/120 pixels
–
CIF
352 × 288/240 pixels
–
1/2 D1
352 × 576/480 pixels
–
2CIF
704 × 288/240 pixels
–
4CIF/D1
704 × 576/480 pixels
–
2/3 D1
464 × 576/480 pixels
5.12.5
Default
Click Default to return the profile to the factory default values.
5.12.6
Details
Clicking the Details >> button displays further details on image quality and data transmission.
These settings require extensive knowledge of the MPEG standard and video data
compression. Incorrect settings can render the video images unusable.
5.12.7
Maximum data rate
This maximum data rate is not exceeded under any circumstances. Depending on the video
quality settings for the I- and P-frames, this fact can result in individual images being skipped.
The value entered here must be at least 10% higher than the value entered in the Target data
rate field. If the value entered here is too low, it will automatically be adjusted.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
42
en | Configuration Using a Web Browser
5.12.8
VideoJet X10
I-frame distance
This parameter allows you to set the intervals in which the I-frames will be coded. 0 means
auto mode, whereby the video server inserts I-frames as necessary. An entry of 1 indicates
that I-frames are continuously generated. An entry of 2 indicates that only every second image
is an I-frame, and 3 only every third image etc.; the frames in between are coded as P-frames.
5.12.9
P-frame quality
This setting allows you to adjust the image quality of the P-frames depending on the
movement within the image. The Auto option automatically adjusts to the optimum
combination of movement and image definition (focus). Selecting Manual allows you to set a
value between 4 and 31 on the slide control. The value 4 represents the best image quality
with, if necessary, a lower frame refresh rate depending on the settings for the maximum data
rate. A value of 31 results in a very high refresh rate and lower image quality.
5.12.10
I-frame quality
This setting allows you to adjust the image quality of the I-frames. The Auto option
automatically adjusts the quality to the settings for the P-frame video quality. Selecting
Manual allows you to set a value between 4 and 31 on the slide control. The value 4
represents the best image quality with, if necessary, a lower frame refresh rate depending on
the settings for the maximum data rate. A value of 31 results in a very high refresh rate and
lower image quality.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.13
Configuration Using a Web Browser | en
43
Video Input
You can activate the 75 Ohm terminating resistance for the video input on the VideoJet X10.
The terminating resistance must be deactivated for the video signal to be looped through.
Every video input is closed at the time of delivery.
5.13.1
75 Ohm termination
Select Off if the video signal is to be looped through.
5.13.2
Source type
To allow VCRs to be connected as a video source, you can change the characteristic of the
video source from the preset value of Camera to VCR. VCRs require a more tolerant setting for
the internal PLL as a result of jitter effects caused by the mechanical components of a VCR.
i
Bosch Security Systems
NOTICE!
In some cases, selecting the VCR option can lead to an improvement in the video image even
with a camera connected.
Installation and Operating Manual
V3.0 | 2007.09
44
en | Configuration Using a Web Browser
5.14
VideoJet X10
Audio
You can set the gain of the audio signals to suit your specific requirements. The current video
image is shown in the small window next to the slide controls to help you check the audio
source and improve assignments. Your changes are effective immediately.
If you connect via Web browser you must activate the audio transmission on the Livepage
Configuration page (see Section 5.32 Livepage Configuration, page 86). For other connections,
the transmission depends on the audio settings of the respective system.
5.14.1
Line In 1
You can set the line input gain. Make sure that the display does not go beyond the green zone
during modulation.
5.14.2
Line Out
You can set the line output gain. Make sure that the display does not go beyond the green
zone during modulation.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.15
Configuration Using a Web Browser | en
45
JPEG Posting
You can save individual JPEG images on an FTP server at specific intervals. You can then
retrieve these images at a later date to reconstruct alarm events if required.
5.15.1
Image size
Select the resolution you wish the JPEG images to have:
–
Small
176 × 144/120 pixels (QCIF)
–
Medium
352 × 288/240 pixels (CIF)
–
Large
704 × 576/480 pixels (4CIF)
5.15.2
File name
You can select how file names will be created for the individual images that are transmitted.
–
Overwrite
The same file name is always used and any existing file will be overwritten with the
current file.
–
Increment
A number from 000 to 255 is added to the file name and automatically incremented by 1.
When it reaches 255 it starts again from 000.
–
Date/time suffix
The date and time are automatically added to the file name. When setting this parameter,
ensure that the unit's date and time are always correctly set. Example: the file
snap011005_114530.jpg was stored on October 1, 2005 at 11:45 and 30 seconds.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
46
en | Configuration Using a Web Browser
5.15.3
VideoJet X10
Posting interval
Enter the interval in seconds at which the images will be sent to an FTP server. Enter zero if
you do not want any images to be sent.
5.15.4
FTP server IP address
Enter the IP address of the FTP server on which you wish to save the JPEG images.
5.15.5
FTP server login
Enter your login name for the FTP server.
5.15.6
FTP server password
Enter the password that gives you access to the FTP server.
5.15.7
Path on FTP server
Enter the exact path on which you wish to post the images on the FTP server.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.16
Configuration Using a Web Browser | en
47
Storage Medium
You can record the images from the camera connected to the VideoJet X10 on various local
storage media or on an appropriately configured iSCSI system.
The internal RAM memory of the VideoJet X10 is suitable for short-term recordings and prealarm recordings in ring mode operation.
CF cards (see Abschnitt 4.3.6 CF Slot, Seite 21) are the ideal solution for shorter storage times
and temporary recordings, for example alarm recordings or local buffering in the event of
network interruptions.
If the VideoJet X10 has a hard drive, this is suitable for longer, local recordings in mobile use.
For long-term, authoritative images in stationary operation, it is essential that you use an
appropriately sized iSCSI system.
It is also possible to let the Video Recording Manager (VRM) control all recording when
accessing an iSCSI system. The VRM is an external program for configuring recording tasks for
video servers. For further information please contact your local customer service at Bosch
Security Systems.
5.16.1
Type
Select the desired storage medium to subsequently configure the recording parameters.
If you select VRM, the Video Recording Manager will manage all recording, and you will not be
able to make any further configurations here.
!
5.16.2
CAUTION!
If you switch the storage medium from iSCSI system to another option, the settings on the
iSCSI page will be lost and can only be restored by reconfiguring them.
Storage Information
The status of the currently selected storage medium and the data throughput are displayed
here for information. You cannot change any of these settings.
1.
Click Log to view a status report with logged actions. A new window will open.
2.
In this window, click Clear to delete all entries. The entries will be deleted immediately.
3.
Click the Close button to close the window.
This action cannot be reversed.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
48
en | Configuration Using a Web Browser
5.17
VideoJet X10
iSCSI
If you select type iSCSI system as the storage medium, you then need to set up a connection
to the desired iSCSI system and set the configuration parameters.
i
5.17.1
NOTICE!
The storage system selected must be available on the network and completely set up.
Amongst other things, it must have an IP address and be divided into logical drives (LUN).
iSCSI IP address
1.
2.
Enter the IP address of the required iSCSI target here.
Click the Read button. The connection to the IP address will be established. The iSCSI
LUN Map field contains the corresponding logical drives.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.17.2
Configuration Using a Web Browser | en
49
iSCSI LUN Map
The LUN map displays the logical drives configured for the iSCSI system. The current user is
displayed for each drive.
1.
Double-click a free drive (LUN). The associated information is called up and automatically
2.
If the logical drive is password protected, you must first enter the password in the Target
displayed in the fields below the map.
password field and click the Set button.
In cases where the information cannot be read due to the network topology, you must enter
the data manually, so that the VideoJet X10 can access the drive. In this case you should
ensure that the entries correspond exactly with the configuration of the iSCSI system.
1.
Enter the required data into the corresponding fields.
2.
Click the Set button. The VideoJet X10 will now use this data to try and connect to the
required drive.
As soon as a connection has been established, the selected drive is used for recordings.
5.17.3
Target IP address
Enter the IP address of the required iSCSI target here.
5.17.4
Target node
Enter the number of the iSCSI target node.
5.17.5
Target LUN
Enter the LUN of the required drive.
5.17.6
Target password
If the drive is password protected, enter the password.
i
5.17.7
NOTICE!
You may not enter a new password. This is only possible by configuring the iSCSI system.
Initiator name
The initiator name is automatically displayed after a connection has been established.
5.17.8
Initiator extension
Enter the initiator extension. For the sake of clarity, you can enter a name or the existing
extension with a comment, for example "– Camera 2".
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
50
en | Configuration Using a Web Browser
5.17.9
VideoJet X10
Decoupling the Drive in Use
Each drive can only be associated with one user. If a drive is already being used by another
user, you can decouple the user and connect the drive with the VideoJet X10.
!
CAUTION!
Before decoupling, make absolutely sure that the previous user no longer needs the drive.
1.
Double-click a drive that is already being used in the LUN map. You will see a warning
message.
2.
Confirm the decoupling of the current user. The drive is released and can now be
connected to the VideoJet X10.
5.17.10
Storage Information
The status of the currently selected storage medium and the data throughput are displayed
here for information. You cannot change any of these settings.
1.
2.
Click Log to view a status report with logged actions. A new window will open.
In this window, click Clear to delete all entries. The entries will be deleted immediately.
This action cannot be reversed.
3.
V3.0 | 2007.09
Click the Close button to close the window.
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.18
Configuration Using a Web Browser | en
51
Partitioning
A partition must be set up for recordings of the camera connected to the VideoJet X10; this is
similar to the partitioning often found on computer hard drives. Parameters such as size and
type of video recording can be specified for the partition. Modifying these parameters leads to
reorganization, during which stored data is lost.
The partition is listed in the table on the Partitioning page together with the number of the
video input (Camera), its partition name, alarm tracks, type and size.
In addition, the page provides you with an overview of the drive data; for example total
memory and number of partitions created. A pie chart indicates how much memory space is
partitioned for recordings.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
52
en | Configuration Using a Web Browser
5.18.1
VideoJet X10
Creating a Partition
i
NOTICE!
The maximum number of partitions is predefined and corresponds to the number of video
inputs on the unit.
Creating a new partition is performed using separate windows in which information is
presented to you and you are led step by step through the necessary settings.
The process must be completed for each partition to be set up on the hard drive.
1.
Click the Create partition button to start the assistant for creating partitions. The first
window appears.
2.
3.
You should always first read the information text in the upper section of the window.
Click in the text fields to enter values or use the other controls that are available, such as
buttons, checkboxes or list fields.
V3.0 | 2007.09
4.
Click the Next > button at the bottom of the window to continue with the next step.
5.
Click the < Back button at the bottom of the window to view the previous step again.
6.
Click the Cancel button to cancel the process and close the wizard.
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.18.2
Configuration Using a Web Browser | en
53
Saving Changes
After you have made all necessary settings, you must transfer the settings to the unit and save
them.
!
CAUTION!
All modifications to settings are only effective if you complete the configuration in the last
window by clicking Finish.
1.
Switch to the last window.
2.
Click Finish to complete the configuration. All settings are now transferred to the unit
and subsequently become effective.
5.18.3
Partition status
The Partition status window provides you with an overview of the current partition
configuration. No changes can be made here.
1.
Click the partition in the list in order to select it.
2.
Click the Partition status button. A new window with the entries for the partition is
opened.
3.
Bosch Security Systems
Click OK to close the window.
Installation and Operating Manual
V3.0 | 2007.09
54
en | Configuration Using a Web Browser
5.18.4
VideoJet X10
Editing a Partition
You can modify the configuration of the partition at any time.
CAUTION!
!
All modifications result in the reorganization of the partition and all sequences stored on it are
therefore lost.
Consequently, you should back up all important sequences on the computer's hard drive
before modifying the partition.
You can perform the required modifications in the Partition Properties window.
1.
2.
Click the partition in the list in order to select it.
Click the Edit partition button. A new window with the entries for the partition is
opened.
5.18.5
3.
Make the desired changes.
4.
Click the Set button to save the modifications.
Partition name
You can enter a new name for the partition.
5.18.6
Partition number
The partition number (= number of the video input) is displayed for information purposes.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.18.7
Configuration Using a Web Browser | en
55
Type of recording
Select the required recording type.
In the case of Ring mode the recording proceeds continuously. If the maximum hard drive
space has been reached, the oldest recordings are automatically overwritten.
In the case of Linear mode the recording proceeds until the entire hard drive space is full. The
recording is then stopped until old recordings have been deleted.
5.18.8
Number of alarm tracks
!
CAUTION!
Alarm tracks must be set up in the partition for alarm recording.
The unit uses a special recording mode during alarm recording for optimal usage of storage
capacity: as soon as a time gap for alarm recording begins, a recording is continuously made
on one segment, which is the size of a complete alarm sequence (pre- and post-alarm time).
This segment in the partition functions in a similar manner to a ring buffer and is overwritten
until an alarm is actually triggered. Recording occurs on the segment only for the duration of
the preset post-alarm time and a new segment is subsequently used in the same manner.
Select the number of alarm tracks to be used in the partition. One alarm event can be
recorded in each alarm track. Accordingly, the number of alarms entered can be recorded and
archived. A partition can contain a maximum of 128 alarm recordings.
If the Ring mode option is set for the partition, the latest alarm recordings are always saved
in the preset number. If the Linear mode option is selected for the partition, the recording is
stopped as soon as the total number of alarm tracks has been described.
5.18.9
Alarm track size
The size for the alarm tracks can be calculated using various parameters. The calculated size
applies for each of the alarm tracks.
1.
Bosch Security Systems
Click the Calculate button. A new window will open.
2.
Select the setting you require from individual parameter list fields.
3.
Click the Set button to apply the calculated value.
Installation and Operating Manual
V3.0 | 2007.09
56
en | Configuration Using a Web Browser
5.18.10
VideoJet X10
Format
You can delete all recordings in a partition at any time.
!
CAUTION!
Check the recordings before deleting and back up important sequences on the computer's
hard drive.
X
5.18.11
Click the Format button to delete all recordings in the partition.
Deleting All Partitions
You can delete a partition that has been created at any time.
CAUTION!
!
Deleting a partition causes reorganization of the entire hard drive and all sequences stored on
it are therefore lost.
Consequently, you should check the recordings before deleting any partitions and back up
important sequences on the computer's hard drive.
X
Click the Delete all partitions button. The display retains the line containing the number,
the partition name is deleted and 0 is specified as the size.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.19
Configuration Using a Web Browser | en
57
Recording Profiles
You can define up to ten different recording profiles. You will then use these recording
profiles in the recording scheduler, where they are linked with the individual days and times
(see Section 5.20 Recording Scheduler, page 59).
i
NOTICE!
You can change or add to the recording profile description on the tabs on the Recording
Scheduler page (see Section 5.20.3 Time Periods, page 60).
1.
Click one of the tabs to edit the corresponding profile.
2.
Click the Default button to return all settings to their default, if appropriate.
3.
Click the Copy settings button if you want to copy the currently visible settings to other
profiles. A new window will open and you can select the profiles in which you want to
copy the settings.
4.
Bosch Security Systems
For each profile, click the Set button to save the settings in the unit.
Installation and Operating Manual
V3.0 | 2007.09
58
en | Configuration Using a Web Browser
5.19.1
VideoJet X10
Standard profile
From this field, you can select the encoder profile to be used for continuous recording (see
Section 5.11 Encoder Profile, page 38).
i
5.19.2
NOTICE!
The recording profile can deviate from the standard setting Active profile and is only used
during an active recording.
Encoder
Here you can select the data stream to be used for the recording.
5.19.3
Alarm track recording
i
NOTICE!
This parameter is active only if alarm tracks have been configured (see Section 5.18.8 Number
of alarm tracks, page 55).
X
Click the checkbox to activate alarm track recording. The pre-alarm time is automatically
displayed for information.
5.19.4
Post-alarm time
You can select the required post-alarm time from the list field.
5.19.5
Post-alarm profile
You can select the encoder profile to be used for recording during the post-alarm time (see
Section 5.11 Encoder Profile, page 38).
The Standard profile option adopts the selection for continuous recordings at the top of the
page.
5.19.6
Alarm input / Motion alarm / Video loss alarm
Here you can select the alarm sensor that is to trigger a recording.
NOTICE!
The motion alarm is configured and activated on the VCA page (see Section 5.23 VCA,
i
page 65).
The alarm inputs are configured and activated on the Alarm sources page (see
Section 5.21 Alarm Sources, page 61).
The numbering of the checkboxes for the alarm inputs corresponds to the labeling of the
alarm inputs on the VideoJet X10.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.20
Configuration Using a Web Browser | en
59
Recording Scheduler
The recording scheduler allows you to link the created recording profiles with the days and
times at which the camera's images are to be recorded in the event of an alarm.
You can link any number of 15 minute intervals with the recording profiles for each day of the
week. Moving the mouse cursor over the table displays the time below it. This aids
orientation.
In addition to the normal weekdays, you can define holidays that are not in the standard
weekly schedule on which recordings are to apply. This allows you to apply a schedule for
Sundays to other days with dates that fall on varying weekdays.
1.
Click the profile you want to link in the Time Periods field.
2.
Click in a field in the table, hold down the mouse button and drag the cursor over all the
3.
Use the right mouse button to deselect any of the intervals.
4.
Click the Select all button to link all time intervals to the selected profile.
5.
Click the Clear all button to deselect all of the intervals.
6.
When you are finished, click the Set button to save the settings in the unit.
periods to be assigned to the selected profile.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
60
en | Configuration Using a Web Browser
5.20.1
VideoJet X10
Holidays
You can define holidays that are not in the standard weekly schedule on which recordings are
to apply. This allows you to apply a schedule for Sundays to other days with dates that fall on
varying weekdays.
1.
Click the Holidays tab. Any days that have already been selected will be shown in the
table.
2.
3.
Click the Add button. A new window will open.
Select the desired date from the calendar. You can select several consecutive calendar
days by holding down the mouse button. These will later be displayed as a single entry in
the table.
5.20.2
4.
Click OK to accept the selection. The window will close.
5.
Assign the individual holidays to the recording profiles, as described above.
Deleting Holidays
You can delete holidays you have defined yourself at any time.
5.20.3
1.
Click the Delete button. A new window will open.
2.
Click the date you wish to delete.
3.
Click OK. The item will be deleted from the table and the window will close.
4.
The process must be repeated for deleting additional days.
Time Periods
You can change the names of the recording profiles.
5.20.4
1.
Click a profile and then the Rename button.
2.
Enter your chosen name and then click the Rename button again.
Activating the Recording
After completing configuration, you must activate the recording scheduler and start the
recording. Once recording is underway, the Recording Profiles and Recording Scheduler
pages are deactivated and the configuration cannot be modified.
You can stop the recording activity at any time and modify the settings.
1.
Click the Start button to activate the recording scheduler.
2.
Click the Stop button to deactivate the recording scheduler. Recordings that are
currently running will be interrupted and the configuration can be modified.
5.20.5
Recording status
The graphic indicates the recording activity of the VideoJet X10. You will see an animated
graphic while recording is taking place.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.21
Configuration Using a Web Browser | en
61
Alarm Sources
You can configure the alarm inputs of the VideoJet X10.
5.21.1
Alarm input
Select Active high if the alarm is to be triggered by closing the contact. Select Active low if
the alarm is to be triggered by opening the contact.
5.21.2
Name
You can enter a name for each alarm input, which is then displayed below the icon for the
alarm input on the LIVEPAGE if configured correctly (see Section 5.32 Livepage Configuration,
page 86).
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
62
en | Configuration Using a Web Browser
5.22
VideoJet X10
Alarm Connections
You can select how the VideoJet X10 responds to an alarm. In the event of an alarm, the unit
can automatically connect to a pre-defined IP address. You can enter up to ten IP addresses
which the VideoJet X10 will contact in order in the event of an alarm, until a connection is
made.
5.22.1
Connect on alarm
Select On so that the VideoJet X10 automatically connects to a pre-defined IP address in the
event of an alarm.
By setting Follows input 1 the unit maintains the connection that has been automatically
established for as long as an alarm exists on alarm input 1.
i
5.22.2
NOTICE!
Stream 2 is always transmitted for alarm connections. Bear this fact in mind when assigning
the profile (see Section 5.11 Encoder Profile, page 38).
Number of destination IP address
Specify the numbers of the IP addresses to be contacted in the event of an alarm. The unit
contacts the remote stations one after the other in the numbered sequence until a connection
is made.
5.22.3
Destination IP address
For each number, enter the corresponding IP address for the desired remote station.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.22.4
Configuration Using a Web Browser | en
63
Destination password
If the remote station is password protected, enter the password here.
In this page, you can save a maximum of ten destination IP addresses and hence up to ten
passwords for connecting to remote stations. If connections to more than ten remote stations
are to be possible, for example when initiating connections via higher-ranking systems such as
VIDOS or Bosch Video Management System, you can store a general password here. The
VideoJet X10 can use this general password to connect to all remote stations protected with
the same password. In this case, proceed as follows:
1.
Select 10 from the Number of destination IP address list field.
2.
Enter the address 0.0.0.0 in the Destination IP address field.
3.
Enter your chosen password in the Destination password field.
4.
Define this password as the user password for all remote stations to which a connection
is to be possible.
i
5.22.5
NOTICE!
If you enter the destination IP address 0.0.0.0 for destination 10, the VideoJet X10 will no
longer use this address for the tenth attempt at automatic connection in the event of an
alarm. The parameter is then used only to save the general password.
Video transmission
If the unit is operated behind a firewall, TCP (HTTP Port) should be selected as the transfer
protocol. For use in a local network, select UDP.
CAUTION!
!
Please note that in some circumstances, a larger bandwidth must be available on the network
for additional video images in the event of an alarm, in case Multicast operation is not
possible. To enable Multicast operation, select the UDP option for the Video transmission
parameter here and on the Network page (see Section 5.28.5 Video transmission, page 78).
5.22.6
Remote port
Depending on the network configuration, select a browser port here. The ports for HTTPS
connections will be available only if the On option is selected in the SSL encryption
parameter.
5.22.7
Video output
If you know which unit is being used as the receiver, you can select the analog video output to
which the signal should be switched. If the destination unit is unknown, it is advisable to
select the First available option. In this case, the image is placed on the first free video
output. This is an output on which there is no signal. The connected monitor only displays
images when an alarm is triggered. If you select a particular video output and a split image is
set for this output on the receiver, you can also select from Decoder the decoder in the
receiver that is to be used to display the alarm image.
i
5.22.8
NOTICE!
Refer to the destination unit documentation concerning image display options and available
video outputs.
Decoder
Select a decoder of the receiver to display the alarm image. The decoder selected has an
impact on the position of the image in a split screen. For example, you can specify via a VIP XD
that the upper-right quadrant should be used to display the alarm image by selecting
decoder 2.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
64
en | Configuration Using a Web Browser
5.22.9
VideoJet X10
SSL encryption
The data for the connection, for example the password, can be securely transmitted with SSL
encryption. If you have selected the On option, only encrypted ports are offered in the
Remote port parameter.
i
NOTICE!
Please note that the SSL encryption must be activated and configured at both ends of a
connection. This requires the appropriate certificates to be uploaded onto the VideoJet X10
(see Section 5.35.4 Maintenance log, page 92).
You can activate and configure encryption of the media data (video, audio and metadata) on
the Encryption page (see Section 5.30 Encryption, page 83).
5.22.10
Auto-connect
Select the On option to automatically re-establish a connection to one of the previously
specified IP addresses after each reboot, after a connection breakdown or after a network
failure.
i
5.22.11
NOTICE!
Stream 2 is always transmitted for automatic connections. Bear this fact in mind when
assigning the profile (see Section 5.11 Encoder Profile, page 38).
Audio
Select the On option if you wish to additionally transmit a standalone G.711-encoded audio
stream with alarm connections.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.23
Configuration Using a Web Browser | en
65
VCA
The VideoJet X10 features an integrated video content analysis (VCA), which can detect and
analyze changes in the signal. Such changes can be due to movements in the camera's field of
view.
NOTICE!
i
If computing power becomes short, the highest priority is always the live images and
recordings. This can lead to impairment of the video content analysis. You should therefore
observe the processor load and optimize the encoder settings or the video content analysis
settings as necessary (see Abschnitt 8.5 Processor Load, Seite 116).
Bosch Security Systems
1.
Enter the desired settings.
2.
Click the Default button to return all settings to their default, if appropriate.
Installation and Operating Manual
V3.0 | 2007.09
66
en | Configuration Using a Web Browser
5.23.1
VideoJet X10
Analysis
Select the option On to activate the video content analysis.
As soon as the video content analysis is activated, metadata are created. Depending on the
analysis type selected and the relevant configuration, additional information overlays the
video image in the preview window next to the parameter settings. With the MOTION+
analysis type, for example, the sensor fields in which motion is recorded will be marked with
rectangles.
i
5.23.2
NOTICE!
On the Livepage Configuration page, you can also enable additional information overlays for
the LIVEPAGE (see Section 5.32 Livepage Configuration, page 86).
Analysis type
Select the required analysis algorithm. By default, only MOTION+ is available – this offers a
motion detector and essential recognition of tampering. The current alarm status is displayed
for information purposes.
NOTICE!
i
Additional analysis algorithms with comprehensive functions such as IVMD and IVA are
available from Bosch Security Systems.
If you select one of these algorithms, you can set the corresponding parameters here directly.
You can find information on this in the relevant documents on the product CD supplied (see
Abschnitt 3.1 Scope of Delivery, Seite 11).
5.23.3
Motion Detector (MOTION+ only)
For the detector to function, the following conditions must be met:
–
Analysis must be activated.
–
At least one sensor field must be activated.
–
The individual parameters must be configured to suit the operating environment and the
desired responses.
–
The sensitivity must be set to a value greater than zero.
CAUTION!
Reflections of light (off glass surfaces, etc.), switching lights on or off or changes in the light
!
level caused by cloud movement on a sunny day can trigger unintended responses from the
motion detector and generate false alarms. Run a series of tests at different times of the day
and night to ensure that the video sensor is operating as intended.
For indoor surveillance, ensure constant lighting of the areas during the day and at night.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.23.4
Configuration Using a Web Browser | en
67
Sensitivity (MOTION+ only)
The basic sensitivity of the motion detector can be adjusted for the environmental conditions
to which the camera is subject.
The sensor reacts to variations in the brightness of the video image. The darker the
observation area, the higher the value that must be selected.
5.23.5
Minimum object size (MOTION+ only)
You can specify the number of sensor fields that a moving object must cover to generate an
alarm. This is to prevent objects that are too small from triggering an alarm.
A minimum value of 4 is recommended. This value corresponds to four sensor fields.
5.23.6
Select area (MOTION+ only)
The areas of the image to be monitored by the motion detector can be selected. The video
image is subdivided into 858 square fields. Each of these fields can be activated or
deactivated individually. If you wish to exclude particular regions of the camera's field of view
from monitoring due to continuous movement (by a tree in the wind, etc.), the relevant fields
can be deactivated.
1.
Click Select area to configure the sensor fields. A new window will open.
2.
If necessary, click Clear all first to clear the current selection (fields marked yellow).
3.
Left-click the fields to be activated. Activated fields are marked yellow.
4.
If necessary, click Select all to select the entire video frame for monitoring.
5.
Right-click any fields you wish to deactivate.
6.
Click OK to save the configuration.
7.
Click the close button X in the window title bar to close the window without saving the
changes.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
68
en | Configuration Using a Web Browser
5.23.7
VideoJet X10
Tamper Detection
You can reveal the tampering of cameras and video cables by means of various options. Run a
series of tests at different times of the day and night to ensure that the video sensor is
operating as intended.
i
5.23.8
NOTICE!
The options for tamper detection can only be set for fixed cameras. Dome cameras or other
motorized cameras cannot be protected in this manner as the movement of the camera itself
causes changes in the video image that are too great.
Sensitivity
i
NOTICE!
This and the following parameter are only accessible if the reference check is activated.
The basic sensitivity of the tamper detection can be adjusted for the environmental conditions
to which the camera is subject.
The algorithm reacts to the differences between the reference image and the current video
image. The darker the observation area, the higher the value that must be selected.
5.23.9
Trigger delay (s)
You can set delayed alarm triggering. The alarm is only triggered after a set time interval in
seconds has elapsed and then only if the triggering condition still exists. If the original
condition has been restored before this time interval elapses, the alarm is not triggered. This
allows you to avoid false alarms triggered by short-term changes, for example cleaning
activities in the direct field of vision of the camera.
5.23.10
Global change
You can set how large the global change in the video image must be for an alarm to be
triggered. This setting is independent of the sensor fields selected under Select area. Set a
high value if fewer sensor fields need to change to trigger an alarm. With a low value, it is
necessary for changes to occur simultaneously in a large number of sensor fields to trigger an
alarm.
This option allows you to detect, independently of motion alarms, manipulation of the
orientation or location of a camera resulting from turning the camera mount bracket, for
instance.
5.23.11
Scene too bright
Activate this function if tampering associated with exposure to extreme light (for instance,
shining a flashlight directly on the lens) should trigger an alarm. The average brightness of the
scene provides a basis for recognition.
5.23.12
Scene too dark
Activate this function if tampering associated with covering the lens (for instance, by spraying
paint on it) should trigger an alarm. The average brightness of the scene provides a basis for
recognition.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.23.13
Configuration Using a Web Browser | en
69
Scene too noisy
Activate this function if tampering associated with EMC interference (noisy scene as the result
of a strong interference signal in the vicinity of the video lines), as an example, should trigger
an alarm.
5.23.14
Global change
Activate this function if the global change, as set with the Global change slide control, should
trigger an alarm.
5.23.15
Reference check
You can save a reference image that is continuously compared with the current video image. If
the current video image in the marked areas differs from the reference image, an alarm is
triggered. This allows you to detect tampering that would otherwise not be detected, for
example if the camera is turned.
1.
Click Reference to save the currently visible video image as a reference.
2.
Click Select area and select the areas in the reference image that are to be monitored.
3.
Check the Reference check box to activate on-going matching. The stored reference
image is displayed in black and white below the current video image, and the selected
areas are marked in yellow.
5.23.16
Select area
You can select the image areas in the reference image that are to be monitored. The video
image is subdivided into 858 square fields. Each of these fields can be activated or
deactivated individually.
i
NOTICE!
Select only those areas for reference monitoring in which no movement takes place and that
are always evenly lit, as false alarms could otherwise be triggered.
1.
Click Select area to configure the sensor fields. A new window will open.
2.
If necessary, click Clear all first to clear the current selection (fields marked yellow).
3.
Left-click the fields to be activated. Activated fields are marked yellow.
4.
If necessary, click Select all to select the entire video frame for monitoring.
5.
Right-click any fields you wish to deactivate.
6.
Click OK to save the configuration.
7.
Click the close button X in the window title bar to close the window without saving the
changes.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
70
en | Configuration Using a Web Browser
5.24
VideoJet X10
Alarm E-Mail
As an alternative to automatic connecting, alarm states can also be documented by e-mail. In
this way it is possible to notify a recipient who does not have a video receiver. In this case the
VideoJet X10 automatically sends an e-mail to a previously defined e-mail address.
5.24.1
Send alarm e-mail
Select On if you want the unit to automatically send an alarm e-mail in the event of an alarm.
5.24.2
Mail server IP address
Enter the IP address of a mail server that operates on the SMTP standard (Simple Mail
Transfer Protocol). Outgoing e-mails are sent to the mail server via the address you entered.
Otherwise leave the box blank (0.0.0.0).
5.24.3
SMTP user name
Enter a registered user name for the chosen mailserver here.
5.24.4
SMTP password
Enter the required password for the registered user name here.
5.24.5
Layout
You can select the data format of the alarm message.
–
Standard (with JPEG)
E-mail with attached JPEG image file.
–
SMS
E-mail in SMS format to an e-mail-to-SMS gateway (for example to send an alarm by
cellphone) without an image attachment.
CAUTION!
!
V3.0 | 2007.09
When a cellphone is used as the receiver, make sure to activate the e-mail or SMS function,
depending on the format, so that these messages can be received.
You can obtain information on operating your cellphone from your cellphone provider.
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.24.6
Configuration Using a Web Browser | en
71
Attach JPEG from camera
Click the checkbox to specify that JPEG images are sent from the camera. An enabled video
input is indicated by a check mark.
5.24.7
Destination address
Enter the e-mail address for alarm e-mails here. The maximum address length is 49 characters.
5.24.8
Sender name
Enter a unique name for the e-mail sender, for example the location of the unit. This will make
it easier to identify the origin of the e-mail.
5.24.9
Test e-mail
You can test the e-mail function by clicking the Send now button. An alarm e-mail is
immediately created and sent.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
72
en | Configuration Using a Web Browser
5.25
VideoJet X10
Alarm Task Editor
CAUTION!
Editing scripts on this page overwrites all settings and entries on the other alarm pages. This
!
procedure cannot be reversed.
In order to edit this page, you must have programming knowledge and be familiar with the
information in the Alarm Task Script Language document. You can find the document on the
product CD supplied (see Abschnitt 3.1 Scope of Delivery, Seite 11).
As an alternative to the alarm settings on the various alarm pages, you can enter your desired
alarm functions in script form here. This will overwrite all settings and entries on the other
alarm pages.
1.
Click the Examples link under the Alarm Task Editor field to see some script examples. A
new window will open.
2.
Enter new scripts in the Alarm Task Editor field or change existing scripts in line with
your requirements.
3.
When you are finished, click the Set button to transmit the scripts to the unit. If the
transfer was successful, the message Script successfully parsed is displayed over the
text field. If it was not successful, an error message will be displayed with further
information.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.26
Configuration Using a Web Browser | en
73
Relay Settings
You can configure the switching behavior of the relay outputs. For each relay, you can specify
an open switch relay (normally closed contact) or a closed switch relay (normally open
contact).
You can also specify whether an output should operate as a bistable or monostable relay. In
bistable mode, the triggered state of the relay is maintained. In monostable mode, you can set
the time after which the relay will return to the idle state.
You can select different events that automatically activate an output. It is possible, for
example, to turn on a floodlight by triggering a motion alarm and then turning the light off
again when the alarm has stopped.
5.26.1
Idle state
Select Open if you want the relay to operate as an NO contact, or select Closed if the relay is
to operate as an NC contact.
5.26.2
Operating mode
Select an operating mode for the relay.
For example, if you want an alarm-activated lamp to stay on after the alarm ends, select
Bistable. If you wish an alarm-activated siren to sound for ten seconds, for example, select
10 s.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
74
en | Configuration Using a Web Browser
5.26.3
VideoJet X10
Relay follows
If required, select a specific event that will trigger the relay. The following events are possible
triggers:
–
Off
Relay is not triggered by events
–
Connection
Trigger whenever a connection is made
–
Video alarm
Trigger by interruption of the video signal
–
Motion alarm
–
Local input
Trigger by motion alarm, as configured on the VCA page (see Section 5.23 VCA, page 65)
Trigger by the corresponding external alarm input
–
Remote input
Trigger by remote station's corresponding switching contact (only if a connection exists)
i
5.26.4
NOTICE!
The numbers in the lists of selectable events relate to the corresponding connections on the
unit, Video alarm 1, for example to the Video In connection.
Relay name
You can assign a name for the relay here. The name is shown on the button next to Trigger
relay. The Livepage can also be configured to display the name under the relay icon.
5.26.5
Trigger relay
Click the button to trigger the relay manually (for testing or to operate a door opener, for
example).
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.27
Configuration Using a Web Browser | en
75
COM1
You can configure the serial interface parameters (orange terminal block) to meet your
requirements.
NOTICE!
i
If the VideoJet X10 is working in multicast mode (see Section 5.29 Multicasting, page 81), the
first remote location to establish a video connection to the unit is also assigned the
transparent data connection. However, after about 15 seconds of inactivity the data
connection is automatically terminated and another remote location can exchange
transparent data with the unit.
5.27.1
Serial port function
Select a controllable unit from the list. If you wish to use the serial port to transmit
transparent data, select Transparent. Select Terminal if you wish to operate the unit from a
terminal.
i
Bosch Security Systems
NOTICE!
After selecting a unit, the remaining parameters in the window are set automatically and
should not be changed.
Installation and Operating Manual
V3.0 | 2007.09
76
en | Configuration Using a Web Browser
5.27.2
VideoJet X10
Camera ID
If necessary, enter the ID of the peripheral you wish to control (for example a dome camera or
pan/tilt head).
5.27.3
Baud rate
Select the value for the transmission transmission rate in bps.
5.27.4
Data bits
The number of data bits per character cannot be changed.
5.27.5
Stop bits
Select the number of stop bits per character.
5.27.6
Parity check
Select the type of parity check.
5.27.7
Interface mode
Select the required protocol for the serial interface.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.28
Configuration Using a Web Browser | en
77
Network
The settings in this screen are used to integrate the VideoJet X10 into an existing network.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
78
en | Configuration Using a Web Browser
VideoJet X10
Changes to fields followed by the Reboot link are transmitted to the unit by clicking the Set
button; however, they will only be activated once the unit is rebooted.
1.
Make the desired changes.
2.
Click the Set button.
3.
Click a Reboot link to trigger a reboot. VideoJet X10 is rebooted and the changed
settings are activated.
!
5.28.1
CAUTION!
If you change the IP address, subnet mask or gateway address, the VideoJet X10 is only
available under the new addresses after the reboot.
IP address
Enter the desired IP address for the VideoJet X10. The IP address must be valid for the
network.
5.28.2
Subnet mask
Enter the appropriate subnet mask for the selected IP address here.
5.28.3
Gateway address
If you want the unit to establish a connection to a remote location in a different subnet, enter
the IP address of the gateway here. Otherwise leave the box blank (0.0.0.0).
5.28.4
DNS server address
The VideoJet X10 is easier to access if the unit is listed on a DNS server. If you wish, for
example, to establish an Internet connection to the VideoJet X10, it is sufficient to enter the
name given to the unit on the DNS server as a URL in the browser. Enter the DNS server's IP
address. Servers are supported for secure and dynamic DNS.
5.28.5
Video transmission
If the unit is operated behind a firewall, TCP (HTTP Port) should be selected as the transfer
protocol. For use in a local network, select UDP.
CAUTION!
!
5.28.6
Multicast operation is only possible with the UDP protocol. The TCP protocol does not
support multicast connections.
The MTU value in UDP mode is 1,514 bytes.
HTTP browser port
Select a different HTTP browser port from the list if required. The default HTTP port is 80. If
you want to allow only secure connections via HTTPS, you must deactivate the HTTP port. In
this case, select Off.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.28.7
Configuration Using a Web Browser | en
79
HTTPS browser port
If you wish to allow browser access on the network via a secure connection, select an HTTPS
browser port from the list if necessary. The default HTTPS port is 443. Select the Off option to
deactivate HTTPS ports; only unsecured connections will now be possible.
The VideoJet X10 uses the TLS 1.0 encryption protocol. You may have to activate this
protocol via your browser configuration. You must also activate the protocol for the Java
applications (via the Java control panel in the Windows control panel).
NOTICE!
i
If you want to allow only secure connections with SSL encryption, you must select the Off
option for each of the parameters HTTP browser port, RCP+ port 1756 and Telnet support.
This deactivates all unsecured connections. Connections will then only be possible via the
HTTPS port.
You can activate and configure encryption of the media data (video, audio and metadata) on
the Encryption page (see Section 5.30 Encryption, page 83).
5.28.8
RCP+ port 1756
To exchange connection data, you can activate the unsecured RCP+ port 1756. If you want
connection data to be transmitted only when encrypted, select the Off option to deactivate
the port.
5.28.9
Telnet support
If you want to allow only secure connections with encrypted data transmission, you must
select the Off option to deactivate Telnet support. The unit will then no longer be accessible
using the Telnet protocol.
5.28.10
Ethernet link type 1
If necessary, select the Ethernet link type for interface ETH 1. Depending on the unit
connected, it may be necessary to select a special operation type.
5.28.11
Ethernet link type 2
If necessary, select the Ethernet link type for interface ETH 2. Depending on the unit
connected, it may be necessary to select a special operation type.
5.28.12
Network MSS (Byte)
You can set the maximum segment size for the IP packet's user data. This gives you the option
to adjust the size of the data packets to the network environment and to optimize data
transmission. Bear comply with the MTU value of 1,514 bytes in UDP mode.
5.28.13
iSCSI MSS (Byte)
You can specify a higher MSS value for a connection to the iSCSI system than for the other
data traffic via the network. The potential value depends on the network structure. A higher
value is only useful if the iSCSI system is located in the same subnet as the VideoJet X10.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
80
en | Configuration Using a Web Browser
5.28.14
VideoJet X10
SNMP
The VideoJet X10 supports the SNMP V2 (Simple Network Management Protocol) for
managing and monitoring network components, and can send SNMP messages (traps) to IP
addresses. The unit supports SNMP MIB II in the unified code. If you wish to send SNMP traps,
enter the IP addresses of one or two required target units here.
If you select On for the SNMP parameter and do not enter an SNMP host address, the
VideoJet X10 does not send them automatically, but only replies to SNMP requests. If you
enter one or two SNMP host addresses, SNMP traps are sent automatically. Select Off to
deactivate the SNMP function.
5.28.15
1. SNMP host address / 2. SNMP host address
If you wish to send SNMP traps automatically, enter the IP addresses of one or two required
target units here.
5.28.16
SNMP traps
You can select which traps are to be sent.
5.28.17
1.
Click Select. A new window will open.
2.
Click the checkboxes to select the required traps. All the checked traps will be sent.
3.
Click OK to apply the selection.
Authentication
If a RADIUS server is employed in the network for managing access rights, authentication must
be activated here to allow communication with the unit. The RADIUS server must also contain
the corresponding data.
To configure the unit, you must connect the VideoJet X10 directly to a computer using a
network cable. This is because communication via the network is not enabled until the
Identity and Password parameters have been set and successfully authenticated.
5.28.18
Identity
Enter the name that the RADIUS server is to use for identifying the VideoJet X10.
5.28.19
Password
Enter the password that is stored in the RADIUS server.
5.28.20
Automatic IP assignment
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you
can activate acceptance of IP addresses automatically assigned to the VideoJet X10.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.29
Configuration Using a Web Browser | en
81
Multicasting
In addition to a 1:1 connection between an encoder and a single receiver (unicast), the
VideoJet X10 can enable multiple receivers to receive the video signal from an encoder
simultaneously. The unit either duplicates the data stream itself and then distributes it to
multiple receivers (multi-unicast) or it sends a single data stream to the network, where the
data stream is simultaneously distributed to multiple receivers in a defined group (multicast).
You can enter a dedicated multicast address and port for each stream. You can switch
between the streams by clicking the appropriate tabs.
i
NOTICE!
Multicast operation requires a multicast-enabled network that uses the UDP and the Internet
Group Management IGMP protocols. Other group management protocols are not supported.
The TCP protocol does not support multicast connections.
A special IP address (class D address) must be configured for multicast operation in a
multicast-enabled network.
The network must support group IP addresses and the Internet Group Management Protocol
(IGMP V2). The address range is from 225.0.0.0 to 239.255.255.255.
The multicast address can be the same for multiple streams. However, it will be necessary to
use a different port in each case so that multiple data streams are not sent simultaneously
using the same port and multicast address.
i
Bosch Security Systems
NOTICE!
The settings must be made individually for each stream.
Installation and Operating Manual
V3.0 | 2007.09
82
en | Configuration Using a Web Browser
5.29.1
VideoJet X10
Multicast address video 1
Enter a valid multicast address for each stream to be operated in multicast mode (duplication
of the data streams in the network).
With the setting 0.0.0.0 the encoder for the relevant stream operates in multi-unicast mode
(copying of data streams in the unit). The VideoJet X10 supports multi-unicast connections for
up to five simultaneously connected receivers.
i
5.29.2
NOTICE!
Duplication of data places a heavy demand on the unit and can lead to impairment of the
image quality under certain circumstances.
Port
Assign a different port to each data stream if there are simultaneous data streams at the same
multicast address.
Enter the port address of the required stream here.
5.29.3
Streaming
Click the checkbox to activate multicast streaming mode for the relevant stream. An enabled
stream is indicated by a check mark.
5.29.4
Multicast packet TTL
You can enter a value to specify how long the multicast data packets are active on the
network. This value must be greater than one if multicast is to be run via a router.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.30
Configuration Using a Web Browser | en
83
Encryption
A special license, with which you will receive a corresponding activation key, is required to
encrypt user data. You can enter the activation key to release the function on the Licenses
page (see Section 5.34 Licenses, page 90).
Here you can activate encryption of media data (video, audio and metadata). If you activate
encryption here, the exchange of connection data (RCP+) is also automatically encrypted.
CAUTION!
!
If you want to work with encrypted data transmission, you should allow only secured Web
browser connections with SSL encryption. This is done by deactivating all open ports and
protocols (see Section 5.28 Network, page 77).
Connections will then only be possible via the HTTPS port.
You have the option of selecting individual data channels for the encryption. As soon as a key
has been generated, the data for the corresponding channel is transmitted only if encrypted. If
you delete a key, the data for this channel will be transferred unencrypted.
i
Bosch Security Systems
NOTICE!
The encryption of video data requires increased computing power.
Installation and Operating Manual
V3.0 | 2007.09
84
en | Configuration Using a Web Browser
5.30.1
VideoJet X10
Encryption
1.
From the Encryption list field, select the On option to activate the encryption. Keys will
then be generated for all data channels.
2.
Click the Keys >> button. The keys for the individual data channels will be displayed.
3.
Click an entry in the list to select it.
4.
Hold the [Ctrl] key down to select multiple entries.
5.
Click the Clear keys button to delete the selected key. The data for this channel will now
be transmitted unencrypted.
5.30.2
6.
Click the Generate keys button to generate a new key for a selected channel.
7.
Click the Edit button to enter a key for a selected entry yourself.
Automatic key interchange
You can activate automatic key interchange between two units (or unit and software decoder)
over a secure connection. If the box is checked, keys will be automatically exchanged.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.31
Configuration Using a Web Browser | en
85
Version Information
The data on this page are for information purposes only and cannot be changed. Keep a
record of these numbers in case technical assistance is required.
i
Bosch Security Systems
NOTICE!
You can select all required text on this page with the mouse and copy it to the clipboard with
the [Ctrl]+[C] key combination, for example if you want to send it via e-mail.
Installation and Operating Manual
V3.0 | 2007.09
86
en | Configuration Using a Web Browser
5.32
VideoJet X10
Livepage Configuration
In this window you can customize the appearance of the LIVEPAGE to suit your requirements.
You can opt to have selected information and controls displayed in addition to the video
image.
If necessary, you can also replace the manufacturer's logo (top right) and the product name
(top left) in the top part of the window with individual graphics.
NOTICE!
i
You can use either GIF or JPEG images. The file paths must correspond to the access mode
(for example C:\Images\Logo.gif for access to local files, or http://www.mycompany.com/
images/logo.gif for access via the Internet/Intranet).
When accessing via the Internet/Intranet, ensure that a connection is always available to
display the image. The image file is not stored in the VideoJet X10.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
Configuration Using a Web Browser | en
1.
87
Check the box for the items that are to be displayed on the LIVEPAGE. The selected
items are indicated by a check mark.
2.
5.32.1
Go to the LIVEPAGE to check whether and how the required items are displayed.
Company logo
1.
Enter the path to a suitable graphic if you want to replace the manufacturer's logo. The
image file can be stored on a local computer, in the local network or at an Internet
address.
2.
5.32.2
If necessary, click Browse to search for an appropriate graphic in the local network.
Device logo
1.
Enter the path to a suitable graphic if you want to replace the product name. The image
2.
If necessary, click Browse to search for an appropriate graphic in the local network.
file can be stored on a local computer, in the local network or at an Internet address.
i
5.32.3
NOTICE!
If you want to use the original graphics again, simply delete the entries in the Company logo
and Device logo fields.
Transmit audio
The audio signals are sent in a separate data stream parallel to the video data, and so
increase the network load. The audio data are encoded according to G.711 and require an
additional bandwidth of approx. 80 kbps for each connection.
5.32.4
Bilinx control
Next to the field for view control at the top left of the LIVEPAGE, an additional field is
displayed for the special Bosch Security Systems Bilinx control.
5.32.5
Show alarm inputs
The alarm inputs are shown next to the video image as icons, along with their assigned names.
If an alarm is active, the corresponding icon changes color.
5.32.6
Show relay outputs
The relay outputs are shown next to the video image as icons, along with their assigned
names. If the relay is switched, the icon changes color.
5.32.7
Show VCA trajectories
The trajectories (motion lines of objects) from the video content analysis are displayed in the
live video image if a corresponding analysis type is activated (see Section 5.23 VCA, page 65).
5.32.8
Show VCA metadata
When the analysis function is activated, the additional information from the video content
analysis (VCA) will be displayed in the live video image (see Section 5.23 VCA, page 65). With
the MOTION+ analysis type, for example, the sensor fields in which motion is recorded will be
marked with rectangles.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
88
en | Configuration Using a Web Browser
5.32.9
VideoJet X10
JPEG size
You can choose between two given image sizes to display the M-JPEG image.
5.32.10
JPEG interval
You can specify the interval at which the individual images should be generated for the MJPEG image.
5.32.11
JPEG quality
You can specify the image quality for displaying M-JPEG on the LIVEPAGE.
5.32.12
Show event log
The event messages are displayed along with the date and time in a field next to the video
image.
5.32.13
Show system log
The system messages are displayed along with the date and time in a field next to the video
image and provide information about establishing and ending connections, for example.
5.32.14
Save event log
Check this option to save event messages in a text file on your local computer.
You can then view, edit and print this file with any text editor or the standard Office software.
5.32.15
Save system log
Check this option to save system messages in a text file on your local computer.
You can then view, edit and print this file with any text editor or the standard Office software.
5.32.16
5.32.17
5.32.18
File for event log
1.
Enter the path for saving the event log here.
2.
If necessary, click Browse to find a suitable directory.
File for system log
1.
Enter the path for saving the system log here.
2.
If necessary, click Browse to find a suitable directory.
Path for JPEG and MPEG files
1.
Enter the path for the storage location of individual images and video sequences that you
can save from the LIVEPAGE.
2.
V3.0 | 2007.09
If necessary, click Browse to find a suitable directory.
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.33
Configuration Using a Web Browser | en
89
System State
The storage devices used by VideoJet X10 are monitored. If a storage device is no longer
available for recordings, for example due to a technical defect, a Failed message will be
displayed in this window. You can reset the error message to establish whether the error still
exists.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
90
en | Configuration Using a Web Browser
5.34
VideoJet X10
Licenses
You can enter the activation key to enable additional functions or software modules in this
window.
i
V3.0 | 2007.09
NOTICE!
The activation key cannot be deactivated again and is not transferable to other units.
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.35
Configuration Using a Web Browser | en
91
Maintenance
5.35.1
Firmware
The VideoJet X10 is designed in such a way that its functions and parameters can be updated
with firmware. To do this, transfer the current firmware package to the unit via the selected
network. It will then be automatically installed there.
In this way, a VideoJet X10 can be serviced and updated remotely without a technician having
to change the installation on site.
You obtain the current firmware from your customer service or from the download area on our
Internet site.
CAUTION!
Before launching the firmware upload make sure that you have selected the correct upload
file. Uploading the wrong files can result in the unit no longer being addressable, in which
!
case you must replace the unit.
You should never interrupt the installation of firmware. An interruption can lead to the Flash
EPROM being incorrectly programmed. This in turn can result in the unit no longer being
addressable, in which case it will have to be replaced. Even changing to another page or
closing the browser window leads to an interruption.
1.
2.
First store the firmware file on your hard drive.
Enter the full path of the firmware file in the field or click Browse to locate and select the
file.
3.
Next, click Upload to begin transferring the file to the unit. The progress bar allows you to
monitor the transfer.
The new firmware is unpacked and the Flash EPROM is reprogrammed. The time remaining is
shown by the message going to reset Reconnecting in ... seconds. The unit reboots
automatically once the upload has successfully completed.
If the Connect LED lights up red, the upload has failed and must be repeated. To perform the
upload you must now switch to a special page:
1.
In the address bar of your browser, enter /main.htm after the IP address of the
VideoJet X10 (for example 192.168.0.10/main.htm).
2.
Bosch Security Systems
Repeat the upload.
Installation and Operating Manual
V3.0 | 2007.09
92
en | Configuration Using a Web Browser
5.35.2
VideoJet X10
Configuration
You can save configuration data for the VideoJet X10 on a computer and then load saved
configuration data from a computer to the unit.
Upload
1.
2.
Enter the full path of the file to upload or click Browse to select the required file.
Make certain that the file to be loaded comes from the same unit type as the unit you
want to configure.
3.
Next, click Upload to begin transferring the file to the unit. The progress bar allows you to
monitor the transfer.
Once the upload is complete the new configuration is activated. The time remaining is shown
by the message going to reset Reconnecting in ... seconds. The unit reboots automatically
once the upload has successfully completed.
Download
5.35.3
1.
Click the Download button. A dialog box opens.
2.
Follow the on-screen instructions to save the current settings.
SSL certificate
To be able to work with an SSL encrypted data connection, both ends of a connection must
hold the relevant certificates. You can upload the SSL certificate, comprising one or multiple
files, onto the VideoJet X10.
If you wish to upload multiple files onto the VideoJet X10, you must select them consecutively.
1.
Enter the full path of the file to upload or click Browse to select the required file.
2.
Next, click Upload to begin transferring the file to the unit.
3.
Once all files have been successfully uploaded, the unit must be rebooted. In the address
field of the browser, enter /reset after the VideoJet X10's IP address (for example
192.168.0.10/reset).
The new SSL certificate is valid.
5.35.4
Maintenance log
You can download an internal maintenance log from the unit to send it to Customer Service
for support purposes. Click Download and select a storage location for the file.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
5.36
Configuration Using a Web Browser | en
93
Function Test
The VideoJet X10 offers a variety of configuration options. You should therefore check that it
is functioning correctly after installation and configuration.
The function test is the only way to ensure that the VideoJet X10 operates as expected in the
event of an alarm.
Your check should include the following functions:
Bosch Security Systems
–
Can the VideoJet X10 be called up remotely?
–
Does the VideoJet X10 transmit all the required data?
–
Does the VideoJet X10 respond to alarm events as required?
–
Do the recordings occur as intended?
–
Is it possible to control peripherals if necessary?
Installation and Operating Manual
V3.0 | 2007.09
94
en | Configuration Using a Web Browser
V3.0 | 2007.09
VideoJet X10
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
Operation | en
6
Operation
6.1
Operation with Microsoft Internet Explorer
95
A computer with Microsoft Internet Explorer (version 6.0 or higher) can receive live images
from the VideoJet X10, control cameras or other peripherals and replay saved video
sequences.
6.1.1
System Requirements
–
Computer with Windows 2000 or Windows XP operating system
–
Network access (Intranet or Internet)
–
Microsoft Internet Explorer (version 6.0 or higher)
–
Screen resolution 1,024 × 768 pixels
–
16- or 32-bit color depth
–
Installed Sun JVM
–
For playing back recordings: connection to storage medium
NOTICE!
i
Also note the information in the System Requirements document on the product CD
supplied. If necessary, you can install the required programs and controls from the product
CD supplied (see Abschnitt 3.1 Scope of Delivery, Seite 11).
You can find notes on using Microsoft Internet Explorer in the online Help in Internet Explorer.
6.1.2
Installing MPEG ActiveX
To allow the live video images to be played back, suitable MPEG ActiveX software must be
installed on the computer. If necessary, you can install the program from the product CD
supplied.
1.
Insert the product CD into the computer's CD-ROM drive. If the CD does not start
automatically, open the root directory of the CD in Windows Explorer and double-click
MPEGAx.exe.
2.
Bosch Security Systems
Follow the on-screen instructions.
Installation and Operating Manual
V3.0 | 2007.09
96
en | Operation
6.1.3
VideoJet X10
Establishing the Connection
The VideoJet X10 must be assigned a valid IP address to operate on your network.
The following default address is preset at the factory: 192.168.0.1
1.
2.
Start the Web browser.
Enter the VideoJet X10's IP address as the URL. The connection is established and after a
short time you will see the LIVEPAGE with the video image.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
6.2
Operation | en
97
The LIVEPAGE
Once the connection is established, the Web browser displays the LIVEPAGE. It displays the
live video image on the right of the browser window. Depending on the configuration, various
text overlays may be visible on the live video image (see Abschnitt 5.5 Display Stamping,
Seite 32).
Other information may be shown next to the live video image on the LIVEPAGE. The display
depends on the settings on the Livepage Configuration page (see Abschnitt 5.32 Livepage
Configuration, Seite 86).
6.2.1
Maximum Number of Connections
If you do not connect, the unit may have reached its maximum number of connections.
Depending on the unit and network configuration, each VideoJet X10 can have up to 25 Web
browser connections or up to 50 connections via VIDOS or Bosch Video Management System.
6.2.2
Protected VideoJet X10
If the VideoJet X10 is password protected against unauthorized access, the Web browser
displays a corresponding message and prompts you to enter the password when you attempt
to access protected areas.
i
NOTICE!
A VideoJet X10 offers the option to limit the extent of access using various authorization levels
(see Abschnitt 5.6 Password, Seite 34).
1.
Enter the user name and password in the corresponding text fields.
2.
Click OK. If the password is entered correctly, the Web browser displays the page that
was called up.
6.2.3
Image Selection
You can view the image from the camera in different displays.
X
Click one of the tabs MPEG-4 Stream 1, MPEG-4 Stream 2 or M-JPEG below the video
image to toggle between the different displays of the camera image.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
98
en | Operation
6.2.4
VideoJet X10
View Control
Control options for peripherals (for example a pan/tilt head or dome camera) depend on the
type of unit installed and on the VideoJet X10's configuration.
If a controllable unit is configured and connected to the VideoJet X10, the controls for the unit
are displayed next to the video image.
1.
2.
To control a peripheral, click the appropriate controls.
Move the mouse cursor over the video image. Additional options for controlling
peripherals are displayed with the mouse cursor.
6.2.5
Digital I/O
The alarm icons Input 1 to Input 4 are for information purposes and indicate the status of an
alarm input: When an alarm is triggered, the corresponding icon lights up blue. The unit's
configuration determines whether the alarm is displayed, as well as additional details (see
Abschnitt 5.32 Livepage Configuration, Seite 86).
6.2.6
Trigger Relay
You can switch connected units using the relays in the VideoJet X10 (for example lights or
door openers).
X
To activate this, click the icon for the corresponding relay next to the video image. The
icon will be red when the relay is activated.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
6.2.7
Operation | en
99
System Log / Event Log
The System Log field contains information about the operating status of the VideoJet X10 and
the connection. You can save these messages automatically in a file (see
Abschnitt 5.32 Livepage Configuration, Seite 86).
Events such as the triggering or end of alarms are shown in the Event Log field. You can save
these messages automatically in a file (see Abschnitt 5.32 Livepage Configuration, Seite 86).
You can delete the entries from the fields. To do this, click the icon in the top right-hand
corner of the relevant field.
6.2.8
Audio Function
Depending on the configuration, the VideoJet X10 can send and receive audio signals. All
users who are connected by browsers receive the audio signals sent by the VideoJet X10.
Only the user who first connected to the VideoJet X10 can send audio signals to the unit.
1.
On the LIVEPAGE, click anywhere next to the video image to remove the focus from the
ActiveX.
2.
Press and hold the F12 key to establish a voice connection with the VideoJet X10. The
browser's status bar displays the message Send Audio ON.
3.
Release the F12 key if you no longer wish to send audio signals to the VideoJet X10. The
status bar in Internet Explorer displays the message Send Audio OFF.
i
Bosch Security Systems
NOTICE!
When the connection maintaining voice contact with the VideoJet X10 is broken, the next user
to connect to the VideoJet X10 can transmit the audio data to the VideoJet X10.
Installation and Operating Manual
V3.0 | 2007.09
100 en | Operation
6.3
VideoJet X10
Saving Snapshots
You can save individual images from the video sequence currently shown on the LIVEPAGE in
JPEG format on your computer's hard drive.
X
Click the icon for saving single images. The image is saved at a resolution of
704 × 576 pixels (4CIF). The storage location depends on the configuration of the
VideoJet X10 (see Abschnitt 5.32.18 Path for JPEG and MPEG files, Seite 88).
6.4
Recording Video Sequences
You can save sections of the video sequence currently shown on the LIVEPAGE on your
computer's hard drive.
1.
Click the icon for recording video sequences to start recording. The storage location
depends on the configuration of the VideoJet X10 (see Abschnitt 5.32.18 Path for JPEG
and MPEG files, Seite 88). A red dot in the icon indicates that recording is in progress.
2.
i
6.4.1
Click the icon again to stop recording.
NOTICE!
You can play back saved video sequences using the Player from Bosch Security Systems,
which can be installed from the product CD supplied (see Abschnitt 3.1 Scope of Delivery,
Seite 11).
Image Resolution
Sequences are saved at the resolution that has been preset in the configuration for the
encoder (see Abschnitt 5.11 Encoder Profile, Seite 38).
6.5
Running Recording Program
The hard drive icon below the camera images on the LIVEPAGE changes during an automatic
recording.
A moving graphic will appear to indicate a running recording. If no recording is taking place, a
static icon is displayed.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
6.6
Operation | en 101
The RECORDINGS Page
The RECORDINGS page for playing back recorded video sequences can be accessed from the
LIVEPAGE and from the SETTINGS menu.
The RECORDINGS link is only visible if a storage medium has been selected (see
Abschnitt 5.16 Storage Medium, Seite 47).
X
Click the RECORDINGS link in the navigation bar in the upper section of the window. The
playback page appears.
6.6.1
Selecting Recordings
All sequences that are saved in the partition are displayed in the list. A running number (track)
is assigned to each sequence. Start time and stop time, recording duration, number of alarms,
and recording type are displayed.
X
Click a list entry. The playback for the selected sequence starts immediately in the video
window.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
102 en | Operation
6.6.2
VideoJet X10
Controlling a Playback
You will see a time bar below the video image for quick orientation. If a particular sequence
has been clicked and selected for playback, the selected sequence is marked in the list. The
associated time interval is displayed in the bar in gray. A green arrow above the bar indicates
the position of the image currently being played back within the sequence.
The time bar offers various options for navigation in and between sequences.
1.
You can change the time interval displayed by moving the gray area to the left or right
while holding down the mouse button.
2.
You can change the time interval displayed by clicking the zoom keys (magnifying glass
icons). The display can span a range from two months to a few seconds.
3.
You can select a different sequence for playback by clicking the corresponding gray
marking.
4.
If required, drag the green arrow to the point in time at which the playback should begin.
Alternatively you can click directly in the gray time interval or in the timescale to jump to
the position selected in this manner. The date and time display below the bar provides
orientation to the second.
6.6.3
Buttons
You can control playback by means of the buttons below the video image. The buttons have
the following functions:
Start or pause playback
Jump to the start of the active video sequence or
to the previous sequence in the list
Jump to the start of the next video sequence in the list
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
6.6.4
Operation | en 103
Slide Control
You can use the slide control to control playback speed and fast forward/rewind: positioning
in the middle indicates playback at recording speed, left indicates rewind, and right fast
forward. The fast forward or rewind speed changes, depending on how far you move the slide
control toward the runner icons.
You can continuously select playback speed by means of the speed regulator:
Red bars within the gray sequence fields indicate the points in time where alarms were
triggered. Drag the green arrow to navigate to these points quickly.
6.6.5
Bookmarks
In addition, you can set markers in the sequences, so-called bookmarks, and jump directly to
these. These bookmarks are indicated as small yellow arrows above the time interval. Use the
bookmarks as follows:
Jump to the previous bookmark
Set bookmark
Jump to the following bookmark
X
i
Bosch Security Systems
Right-click a bookmark to delete it.
NOTICE!
Bookmarks are only valid while you are in the RECORDINGS page; they are not saved with the
sequences. As soon as you leave the page all bookmarks are deleted.
Installation and Operating Manual
V3.0 | 2007.09
104 en | Operation
6.7
VideoJet X10
Backup
You can back up the video sequences or single images saved on the storage medium of the
VideoJet X10 to the computer's hard drive.
First select the required sequence as described in the previous section. The following buttons
are available for the backup:
Back up a sequence to the computer's hard drive
Back up a single image to the computer's hard drive
1.
Start playback of the sequence that you want to save either completely or partially on the
computer's hard drive.
2.
Click the icon for the sequence backup. The backup starts immediately — this process is
displayed by a red dot in the icon.
3.
Click the sequence backup icon again to end the backup.
This procedure can be repeated many times within the sequence to back up multiple extracts
from a longer sequence.
X
Click the button for backing up a single image to back up only snapshots from the running
sequence to your computer's hard drive.
The single images are immediately displayed in the Screenshots area after clicking. The
storage location for the sequences and single images can be specified in the configuration of
the VideoJet X10 (see Abschnitt 5.32.18 Path for JPEG and MPEG files, Seite 88).
6.7.1
Printing a Screenshot
You can view and print the saved screenshots individually.
V3.0 | 2007.09
1.
Click a preview in the Screenshots area. A new window will open.
2.
Click the Print button to start the printing process.
3.
Click the close button X in the window title bar to close the window again.
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
6.8
Operation | en 105
Installing the Player
You can play back saved video sequences using the Player from Bosch Security Systems,
which can be found on the product CD supplied (see Abschnitt 3.1 Scope of Delivery,
Seite 11).
i
NOTICE!
In order to play back saved sequences using the Player, suitable MPEG ActiveX software must
be installed on the computer.
1.
Insert the CD into the computer's CD-ROM drive. If the CD does not start automatically,
open the CD in Windows Explorer and double-click the index.html file to start the menu.
2.
From the list field at the top, select the language you require and click Tools in the menu.
3.
Click the Archive Player option. The installation will start. Follow the instructions in the
4.
After successful installation, you will find two new icons on your desktop for the Player
installation program. The Archive Player will be installed at the same time as the Player.
and the Archive Player.
5.
Bosch Security Systems
Start the Player by double-clicking the Player icon.
Installation and Operating Manual
V3.0 | 2007.09
106 en | Operation
6.9
VideoJet X10
Hardware Connections Between Video Servers
You can easily connect a VideoJet X10 with a connected camera as a sender, and a suitable
MPEG-4 compatible hardware decoder (for example VIP XD) with a connected monitor as a
receiver via an Ethernet network. In this way it is possible to cover long distances without the
need for major installation or cabling work.
6.9.1
Installation
Compatible video servers are designed to connect to one another automatically, provided they
are correctly configured. They only need to be part of a closed network. Proceed as follows to
install the units:
i
6.9.2
1.
Connect the units to the closed network using Ethernet cables.
2.
Connect them to the power supply.
NOTICE!
Make sure that the units are configured for the network environment and that the correct IP
address for the remote location to be contacted in the event of an alarm is set on the Alarm
Connections configuration page (see Abschnitt 5.22 Alarm Connections, Seite 62).
Connecting
There are three options for establishing a connection between a sender and a compatible
receiver in a closed network:
i
6.9.3
–
an alarm,
–
a terminal program or
–
Internet Explorer.
NOTICE!
Connecting with a Web browser is described in the manual of the relevant unit that is to be
used as the receiver, for example VIP XD.
Connecting on Alarm
With the appropriate configuration, a connection between a sender and a receiver is made
automatically when an alarm is triggered (see Abschnitt 5.22 Alarm Connections, Seite 62).
After a short time the live video image from the sender appears on the connected monitor.
This option can also be used to connect a sender and a compatible receiver using a switch
connected to the alarm input. You do not need a computer to make the connection in this
case.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
6.9.4
Operation | en 107
Connecting with a Terminal Program
Various requirements must be met in order to operate with a terminal program (see
Abschnitt 8.8 Communication with Terminal Program, Seite 118).
1.
Start the terminal program and enter the command 1 in the main menu to switch to the
IP menu.
2.
Enter the command 4 in the IP menu to change the remote IP address, then enter the IP
address of the unit you wish to connect to.
3.
Enter the command 0 to return to the main menu and then enter the command 4 to
switch to the Rcp+ menu.
4.
6.9.5
In the Rcp+ menu, enter the command 5 to activate the automatic connection.
Closing the Connection with a Terminal Program
1.
Start the terminal program and enter the command 4 in the main menu to switch to the
Rcp+ menu.
2.
Bosch Security Systems
In the Rcp+ menu, enter the command 5 to deactivate the automatic connection.
Installation and Operating Manual
V3.0 | 2007.09
108 en | Operation
6.10
VideoJet X10
Operation Using Software Decoders
The VideoJet X10 video server combines with VIDOS to provide a high-performance system
solution.
VIDOS is a software package for operating, controlling and managing CCTV installations (such
as surveillance systems) at remote locations. It runs under Microsoft Windows operating
systems. It is primarily designed for decoding video, audio and control data received from a
remote sender.
There are many options available for operation and configuration when using a VideoJet X10
with VIDOS. Please refer to the software documentation for more details.
Another program that supports the VideoJet X10 is Bosch Video Management System.
Bosch Video Management System is an IP video security solution that enables the seamless
management of digital video, audio and data over any IP network. It was developed for use
with Bosch CCTV products as one component of an extensive video security management
system. It allows you to integrate your existing components into a simple-to-control system or
into the entire Bosch range, benefiting from a complete security solution based on the latest
technology and years of experience.
The VideoJet X10 video server is also designed for use with the DiBos 8 digital recorder.
DiBos 8 records up to 32 video and audio streams and is available as IP software or hybrid
DVR with additional analog camera and audio inputs. DiBos supports the most diverse
functions on the VideoJet X10 video server, for example relay activation, remote control of
peripherals and remote configuration. DiBos 8 can use the alarm inputs for event triggering
and, on release of the MOTION+ motion detector, record the activated cells to enable
intelligent motion search.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
Maintenance and Upgrades | en 109
7
Maintenance and Upgrades
7.1
Testing the Network Connection
You can use the ping command to check the connection between two IP addresses. This
allows you to test whether a unit in the network is active.
1.
Open the DOS command prompt.
2.
Type ping followed by the IP address of the unit.
If the unit is found, the response appears as Reply from ... followed by the number of bytes
sent and the transmission time in milliseconds. If not, the unit cannot be accessed over the
network. This might be because:
–
The unit is not properly connected to the network. Check the cable connections in this
–
The unit is not correctly integrated into the network. Check the IP address, subnet mask
case.
and gateway address.
7.2
Unit Reset
You can use the Factory Reset button to restore the unit to its original settings. Any changes
to the settings are overwritten by the factory defaults. A reset may be necessary, for example,
if the unit has invalid settings that prevent it from functioning as desired.
CAUTION!
!
i
All configured settings will be discarded during a reset.
If necessary, back up the current configuration using the Download button on the
Maintenance configuration page (see Abschnitt 5.35 Maintenance, Seite 91).
NOTICE!
After a reset, the unit can only be addressed via the factory default IP address. The IP address
can be changed as described in the Installation chapter (see Abschnitt 4.5 Setup Using the
Configuration Manager, Seite 25).
1.
If necessary, back up the current configuration using the Download button on the
Maintenance configuration page (see Abschnitt 5.35 Maintenance, Seite 91).
2.
Using a pointed object, press the Factory Reset button located below the orange terminal
block until the Connect LED flashes red (see Abschnitt 3.4 Connections on the Front
Panel, Seite 16). All settings will revert to their defaults.
Bosch Security Systems
3.
Change the IP address of the VideoJet X10 if necessary.
4.
Configure the unit to meet your requirements.
Installation and Operating Manual
V3.0 | 2007.09
110 en | Maintenance and Upgrades
7.3
VideoJet X10
Repairs
!
CAUTION!
Never open the VideoJet X10 housing.
The unit does not contain any user-serviceable parts.
Ensure that all maintenance or repair work is carried out only by qualified personnel
(electrical engineers or network technology specialists). In case of doubt, contact your
dealer's technical service center.
7.4
Transfer and Disposal
The VideoJet X10 should only be passed on together with this installation and operating
manual.
Your Bosch product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should be
disposed of separately from your household waste.
In the European Union, there are separate collection systems for used electrical and electronic
products. Please dispose of this equipment at your local community waste collection/
recycling center.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
Appendix | en 111
8
Appendix
8.1
Troubleshooting
If you are unable to resolve a malfunction, please contact your supplier or systems integrator,
or go directly to Bosch Security Systems Customer Service.
You can view a range of information about your unit version on the Version Information page
(see Abschnitt 5.31 Version Information, Seite 85). Make a note of this information before
contacting Customer Service. You can download an internal maintenance log from the unit on
the Maintenance page if you wish to send it to Customer Service by e-mail (see
Abschnitt 5.35.4 Maintenance log, Seite 92).
The following tables are intended to help you identify the causes of malfunctions and correct
them where possible.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
112 en | Appendix
8.2
VideoJet X10
General Malfunctions
Malfunction
Possible causes
Recommended solution
No connection between
Incorrect cable connections.
Check all cables, plugs,
the unit and terminal
contacts, terminals and
program.
connections.
The computer's serial interface
Check the other serial interface.
is not connected.
Interface parameters do not
If necessary select a different
match.
interface and make sure that the
computer's interface parameters
match those of the unit. Try the
following standard parameters:
19,200 baud, 8 data bits, no
parity, 1 stop bit. Next,
disconnect the unit from the
power supply and reconnect it
again after a few seconds.
No image transmission to Camera error.
Connect local monitor to the
remote station.
camera and check the camera
function.
Faulty cable connections.
Check all cables, plugs, contacts
and connections.
The unit's configuration.
No connection
parameters.
established, no image
transmission.
Check all configuration
Faulty installation.
Check all cables, plugs, contacts
and connections.
Wrong IP address.
Check the IP addresses
(terminal program).
Faulty data transmission within
Check the data transmission
the LAN.
with ping.
The maximum number of
Wait until there is a free
connections has been reached.
connection and then call the
sender again.
No audio transmission to Hardware fault.
Check that all connected audio
remote station.
units are operating correctly.
Faulty cable connections.
Check all cables, plugs, contacts
and connections.
Incorrect configuration.
Check audio parameters on the
Audio configuration and
Livepage Configuration pages.
The audio voice connection is
Wait until the connection is free
already in use by another
and then call the sender again.
receiver.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
Appendix | en 113
Malfunction
Possible causes
The unit does not report
Alarm source is not selected.
an alarm.
Recommended solution
Select possible alarm sources on
the Alarm Sources configuration
page.
No alarm response specified.
Specify the desired alarm
response on the Alarm
Connections configuration page,
change the IP address if
necessary.
Control of cameras or
The cable connection between
Check all cable connections and
other units is not
the serial interface and the
ensure all plugs are properly
possible.
connected unit is not correct.
fitted.
The interface parameters do not Make sure that the settings of all
match those of the other unit
units involved are compatible.
connected.
The unit is not
Power failure during
Have the unit checked by
operational after a
programming by firmware file.
Customer Service and replace if
necessary.
firmware upload.
Incorrect firmware file.
Enter the IP address of the unit
followed by /main.htm in your
Web browser and repeat the
upload.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
114 en | Appendix
8.3
VideoJet X10
Malfunctions with iSCSI Connections
Malfunction
Possible causes
Recommended solution
After connecting to the
Incorrect LUN mapping during
Check the iSCSI system
iSCSI destination, no
iSCSI system configuration.
configuration and reconnect.
After connecting to the
The LUN list could not be read,
Check the iSCSI system
iSCSI destination, "LUN
as it was assigned to the wrong configuration and reconnect.
FAIL" appears below a
network interface.
LUNs are displayed.
node.
LUN mapping is not
Some iSCSI systems do not
Delete the initiator extension on
possible.
support the use of an initiator
the iSCSI configuration page.
extension.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
8.4
Appendix | en 115
LEDs
The VideoJet X10 network video server has a number of LEDs on its front and rear panels that
show the operating status and can give indications of possible malfunctions:
8.4.1
8.4.2
8.4.3
8.4.4
8.4.5
Power On LED
Does not light up:
VideoJet X10 is switched off.
Lights up green:
VideoJet X10 is switched on.
SFP LED
Does not light up:
No connection.
Lights up yellow:
Connection established.
Flashes yellow:
Data being transmitted.
ETH 1 LED
Does not light up:
No network connection.
Lights up yellow:
Network connection established.
Flashes yellow:
Data being transmitted over the network.
ETH 2 LED
Does not light up:
No network connection.
Lights up yellow:
Network connection established.
Flashes yellow:
Data being transmitted over the network.
Connect LED
Lights up red:
Startup in progress.
Lights up green:
Startup complete, VideoJet X10 is operational.
Flashes green:
Video connection established.
Flashes red:
VideoJet X10 is faulty, for example following failed firmware
upload.
8.4.6
Bosch Security Systems
HDD LED
Does not light up:
No hard drive fitted.
Lights up orange:
Hard drive fitted.
Flashes orange:
Hard drive activity.
Installation and Operating Manual
V3.0 | 2007.09
116 en | Appendix
8.5
VideoJet X10
Processor Load
If the VideoJet X10 is accessed via the Web browser, you will see the processor load indicator
in the top left of the window next to the manufacturer's logo.
Moving the mouse cursor over the graphic indicator displays the status of the processor
together with the numerical values. This information may help you with troubleshooting or fine
tuning the unit.
8.6
Serial Interface
Options for using the serial interface include transferring transparent data, controlling
connected units or operating the unit with a terminal program.
The serial interface supports the RS232, RS422 and RS485 transmission standards. The mode
used depends on the current configuration (see Abschnitt 5.27 COM1, Seite 75). Connection
is via the terminal block.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
8.7
Appendix | en 117
Terminal Block
The terminal block has several contacts for:
8.7.1
–
4 alarm inputs
–
4 relay outputs
–
Serial data transmission
Pin Assignment
The pin assignment of the serial interface depends on the interface mode used (see
Abschnitt 5.27 COM1, Seite 75).
Contact
RS232 mode
RS422 mode
RS485 mode
CTS
CTS (clear to send)
RxD- (receive data minus)
Data-
TXD
TxD (transmit data)
TxD- (transmit data minus)
RTS
RTS (ready to send)
TxD+ (transmit data plus)
RXD
RxD (receive data)
RxD+ (receive data plus)
GND
GND (ground)
—
Contact
Function
IN1
Input alarm 1
IN2
Input alarm 2
IN3
Input alarm 3
IN4
Input alarm 4
GND
Ground
R1
Relay output 1
R2
Relay output 2
R3
Relay output 3
R4
Relay output 4
RM1
LED remote indicator
RM2
LED remote indicator
BP
Backup power supply
GND
Ground
+
10 to 30 V (power supply)
–
Ground
Data+
—
Connect each alarm input to a ground contact (GND) when connecting alarm inputs.
For the RM1 and RM2 contact specifications, see Abschnitt 4.3.10 Remote Indication of the
Connection Status, Seite 23.
For the backup power supply specifications, see Abschnitt 4.3.11 Backup Power Supply,
Seite 24.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
118 en | Appendix
VideoJet X10
8.8
Communication with Terminal Program
8.8.1
Data Terminal
If a VideoJet X10 cannot be found in the network or the connection to the network is
interrupted, you can connect a data terminal to the VideoJet X10 for initial setup and setting
of important parameters. The data terminal consists of a computer with a terminal program.
You require a serial transmission cable with a 9-pin Sub-D plug to connect to the computer
and open ends for connection to the terminal block of the VideoJet X10 (see Section 8.7.1 Pin
Assignment, page 117).
HyperTerminal, a communications accessory included with Microsoft Windows, can be used
as the terminal program.
i
NOTICE!
Information on installing and using HyperTerminal can be found in the manuals or in the online
help for MS Windows.
1.
Disconnect the VideoJet X10 from the Ethernet network before working with the terminal
program.
2.
Connect the serial interface of the VideoJet X10 using any available serial interface on the
computer.
8.8.2
Configuring the Terminal
Before the terminal program can communicate with the VideoJet X10, the transmission
parameters must be matched. Make the following settings for the terminal program:
8.8.3
–
19,200 bps
–
8 data bits
–
No parity check
–
1 stop bit
–
No protocol
Command Inputs
After the connection has been established, you must log onto the VideoJet X10 to access the
main menu. Other submenus and functions can be accessed using the on-screen commands.
1.
If necessary, turn off the local echo so that entered values are not repeated on the
display.
2.
Enter one command at a time.
3.
When you have entered a value (such as an IP address), check the characters you have
entered before pressing the [ENTER] key to transfer the values to the VideoJet X10.
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
8.8.4
Appendix | en 119
Assigning an IP Address
To use a VideoJet X10 in your network, you must assign it an IP address that is valid for your
network.
The following default address is preset at the factory: 192.168.0.1
1.
Start a terminal program such as HyperTerminal.
2.
Enter the user name service. The terminal program displays the main menu.
3.
Enter command 1 to open the IP menu.
4.
Enter 1 again. The terminal program displays the current IP address and prompts you to
enter a new IP address.
5.
Enter the desired IP address and press Enter. The terminal program displays the new IP
address.
6.
i
8.8.5
Use the displayed commands for any additional settings which you require.
NOTICE!
You must reboot to activate the new IP address, a new subnet mask or a gateway address.
Reboot
Briefly interrupt the power supply to the VideoJet X10 for a reboot (disconnect the power
supply unit from the mains supply and switch on again after a few seconds).
8.8.6
Additional Parameters
You can use the terminal program to check other basic parameters and modify them where
necessary. Use the on-screen commands in the various submenus to do this.
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
120 en | Appendix
V3.0 | 2007.09
VideoJet X10
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
9
Glossary | en 121
Glossary
Symbols
10/100 Base-T
802.1x
IEEE-802.3 specification for 10 or 100 Mbps Ethernet
The IEEE 802.1x standard provides a general method for authentication and authorization in
IEEE-802 networks. Authentication is carried out via the authenticator, which checks the
transmitted authentication information using an authentication server (see RADIUS server)
and approves or denies access to the offered services (LAN, VLAN or WLAN) accordingly.
A
ARP
Address Resolution Protocol: a protocol for mapping MAC and IP addresses
B
Baud
Unit of measure for the speed of data transmission
bps
Bits per second, the actual data rate
C
CF
CompactFlash; interface standard, for digital storage media amongst other things. Used in
computers in the form of CF cards, digital cameras and Personal Digital Assistants (PDA).
CIF
Common Intermediate Format, video format with 352 × 288/240 pixels
D
DHCP
Dynamic Host Configuration Protocol: uses an appropriate server to enable dynamic
assignment of an IP address and other configuration parameters to computers on a network
(Internet or LAN).
DNS
Domain Name Service
F
FTP
File Transfer Protocol
Full duplex
Simultaneous data transmission in both directions (sending and receiving)
G
GBIC
GigaBit Interface Converter; applied in network technology to render interfaces flexible, for
converting an electrical interface into an optical interface, for example. This enables flexible
operation of an interface as a Gigabit Ethernet via twisted-pair cables or fiber optic cables.
GoP
Group of Pictures
H
HTTP
Bosch Security Systems
Hypertext Transfer Protocol: protocol for transmitting data over a network
Installation and Operating Manual
V3.0 | 2007.09
122 en | Glossary
HTTPS
VideoJet X10
Hypertext Transfer Protocol Secure: encrypts and authenticates communication between Web
server and browser
I
ICMP
Internet Control Message Protocol
ID
Identification: a machine readable character string
IEEE
Institute of Electrical and Electronics Engineers
IGMP
Internet Group Management Protocol
Internet Protocol
The main protocol used on the Internet, normally in conjunction with the Transfer Control
Protocol (TCP): TCP/IP
IP
See Internet Protocol
IP address
A 4-byte number uniquely defining each unit on the Internet. It is usually written in dotted
decimal notation, for example "209.130.2.193"
iSCSI
Storage over IP process for storage networks; specifies how storage protocols are operated
over IP.
ISDN
Integrated Services Digital Network
J
JPEG
An encoding process for still images (Joint Photographic Experts Group)
K
kbps
Kilobits per second, the actual data rate
L
LAN
Local area network
See Local area network
A communications network serving users within a limited geographical area such as a building
or university campus. It is controlled by a network operating system and uses a transfer
protocol.
LUN
Logical Unit Number; logical drive in iSCSI storage systems
M
MAC
Media Access Control
MIB
Management Information Base; a collection of information for remote servicing using the
SNMP protocol
MPEG-4
A further development of MPEG-2 designed for transmitting audiovisual data at very low
transfer rates (for example over the Internet)
MSS
V3.0 | 2007.09
Maximum Segment Size; maximum byte figure for the user data in a data packet
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
Glossary | en 123
N
Net mask
A mask that explains which part of an IP address is the network address and which part is the
host address. It is usually written in dotted decimal notation, for example "255.255.255.192"
NTP
Network Time Protocol; a standard for synchronizing computer system clocks via packetbased communication networks. NTP uses the connectionless network protocol UDP. This
was developed specifically for enabling time to be reliably transmitted over networks with
variable packet runtime (Ping).
O
OF
Optical Fiber; now used predominantly as the transmission medium for line-borne
telecommunication processes (glass fiber cable)
P
Parameters
Values used for configuration
Q
QCIF
Quarter CIF, video format with 176 × 144/120 pixels
R
RADIUS server
Remote Authentication Dial-In User Service: a client/server protocol for the authentication,
authorization and accounting of users with dial-up connections on a computer network.
RADIUS is the de-facto standard for central authentication of dial-up connections via Modem,
ISDN, VPN, Wireless LAN (see 802.1x) and DSL.
RFC 868
A protocol for synchronizing computer clocks over the Internet
RS232/RS422/RS485 Standards for serial data transmission
RTP
Realtime Transport Protocol; a transfer protocol for real-time video and audio
S
SFP
Small Form-factor Pluggable; small, standardized module for network connections, designed
as a plug connector for high-speed network connections
SNIA
Storage Networking Industry Association; association of companies for defining the iSCSI
standard
SNMP
Simple Network Management Protocol; a protocol for network management, for managing and
monitoring network components
SNTP
Simple Network Time Protocol; a simplified version of NTP (see NTP)
SSL
Secure Sockets Layer; an encryption protocol for data transmission in IP-based networks
Subnet mask
See Net mask
T
TCP
Bosch Security Systems
Transfer Control Protocol
Installation and Operating Manual
V3.0 | 2007.09
124 en | Glossary
VideoJet X10
Telnet
Login protocol with which users can access a remote computer (Host) on the Internet
TLS
Transport Layer Security; TLS 1.0 and 1.1 and the standard advanced developments of
SSL 3.0 (see SSL)
TTL
Time-To-Live; life cycle of a data packet in station transfers
U
UDP
User Datagram Protocol
URL
Uniform Resource Locator
UTP
Unshielded Twisted Pair
W
WAN
See Wide area network
Wide area network
A long distance link used to extend or connect remotely located local area networks
V3.0 | 2007.09
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
Specifications | en 125
10
Specifications
10.1
Unit
Operating voltage
10 to 30 V DC,
power supply via external unit
Power consumption
Approx. 16 VA with full equipment
LAN interfaces
2 × Ethernet 10/100 Base-T, automatic adjustment,
half/full duplex, RJ45
Data interfaces
1 × RS232/RS422/RS485, bidirectional, push-in terminal
2 × USB 2.0, max. 2.5 W each
SFP slot
1 × 1 Gbps, for mini-GBIC modules
CF slot
1 × CompactFlash type I and II, for standard CF cards
RAM memory
8 MB
Alarm inputs
4 × push-in terminals (non-isolated closing contact),
maximum activation resistance 10 Ohm
Relay outputs
4 × push-in terminal, 30 Vp-p, 2 A, 8 contacts
Video input
1 × BNC socket
0.7 to 1.2 Vp-p, 75 Ohm, PAL/NTSC
Audio input (Line In)
1 × 3.5 mm stereo socket
5.5 Vp-p max., impedance 9 kOhm typ.
Audio output (Line Out)
1 × 3.5 mm stereo socket,
3.0 Vp-p max. at impedance 10 kOhm typ.,
1.7 Vp-p max. at impedance 16 Ohm typ.
Displays
2 × LED (video link, hard drive) on front panel,
4 × LED (operating voltage, 2 × network connection,
SFP connection) on the rear panel
Thermal value
55 BTU/h with full equipment
Operating conditions
Temperature: –30 to +60 °C / –22 to +140 °F
relative humidity: 0 to 95%, non-condensing
Approvals
IEC 60950; UL 60950; AS/NZS 3548 Class B; EN 50130-4;
EN 50121-4; EN 55103-1; EN 55022; EN 55024;
EN 60068-2-1 Ab; EN 60068-2-2 Bb; EN 60068-2-6 Fc;
EN 60068-2-14 Na; EN 60068-2-30 Db; EN 61000-3-2;
EN 61000-3-3; FCC 47 CFR Chapter 1 Part 15
Dimensions (H × W × D)
61 × 160 × 178 mm / 2.4× 6.3 × 7.01 in,
including BNC connections
Weight
Bosch Security Systems
Approx. 1.5 kg, including HDD
Installation and Operating Manual
V3.0 | 2007.09
126 en | Specifications
10.2
VideoJet X10
Protocols/Standards
Video standards
PAL, NTSC
Video coding protocols
MPEG-4, M-JPEG, JPEG
Video data rate
9.6 kbps to 6 Mbps
Image resolutions (PAL/NTSC)
704 × 576/480 pixels (4CIF/D1)
704 × 288/240 pixels (2CIF)
464 × 576/480 pixels (2/3 D1)
352 × 576/480 pixels (1/2 D1)
352 × 288/240 pixels (CIF)
176 × 144/120 pixels (QCIF)
Total delay
120 ms (PAL/NTSC, MPEG-4,
no network delay)
Image refresh rate
25/30 ips max.
Network protocols
RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, DHCP, IGMP V2,
IGMP V3, ICMP, ARP, SNTP, SNMP (V1/V2c/V3 MIB-II),
802.1x
V3.0 | 2007.09
Audio coding protocol
G.711, 300 Hz to 3.4 kHz
Audio sampling rate
8 kHz
Audio data rate
80 kbps
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
11
Index | en 127
Index
A
Activating the recording 60
Activation key 90
Actuator 22
Alarm 17, 32, 98
Alarm e-mail 70
Alarm input 22
Alarm message 33
Alarm sensors 58
Alarm sources 61
Alarm track recording 58
Alarm track size 55
Alarm tracks 55
Audio connections 16, 20
Audio input 16
Audio output 16
Audio settings 44
Audio stream on alarm 64
Audio transmission 87
Auto-connect 64
Automatic key interchange 84
B
Camera 76
Camera name 31
Camera selection 97
Cameras 20
Car battery 24
CF card 17, 21
Changes 30, 53
Changes in light level 66
Checking network 109
COM1 75
CompactFlash 17, 21
Configuration 27, 92
Configuration download 92
Configuration mode 29
Connecting 27, 106
Connecting on alarm 62
Continuous recording 58
Contrast 37
Control 75
Control functions 98
Controlling a playback 102
Conventions 7
Creating a partition 52
D
Danger 9
Data bits 76
Data interface 22
Data terminal 118
Date 35
Date format 35
Bosch Security Systems
E
Echo 118
Editing a partition 54
Electromagnetic compatibility 8
E-mail 70
Encoder 58
Encoding 13
Encryption 83
Encryption protocol 79
EPROM 91
Establishing the connection 28, 96
Event log 88, 99
F
False alarms 66
Firewall 63, 78
Firmware upload 91
Format 56
Front panel connections 16
FTP server 45, 46
Function test 93
Backup 104
Banner 86
Baud rate 76
Bookmarks 103
Brightness 37
Browser window 97
C
Daylight saving time 36
Default 41
Default profile 41
Defaults 57, 65
Deleting recordings 56
Display stamping 32
Dome camera 22
Dual Streaming 13, 38
G
Gateway 78
GBIC module 17
General password 63
H
Holidays 60
HTTP port 78
HTTPS port 79
I
Identification 8, 31
IEEE 802.1x 80
IGMP 81
Image quality 82
Image resolution 100
Image selection 97
Installation 9
Installation conditions 19
Installation location 19
Interface 116
Interface mode 76
Internal clock 35
IP address 78, 119
iSCSI settings 48
J
JPEG format 45
JPEG posting 45
JPEG posting interval 46
L
Language 35
Licenses 90
Installation and Operating Manual
V3.0 | 2007.09
128 en | Index
VideoJet X10
Linear mode 55
Live video images 27, 95
Livepage 86
Low Voltage Directive 8
Low-pass filter 37
M
Main functions 15
Maintenance 9
Make contact 22
Manufacturer logo 86
Media playback 101
Motion detector 65
Motion detector defaults 65
Motion detector object size 67
Motion detector sensitivity 67, 68
MPEG ActiveX 27, 95, 105
MPEG-4 encoder 38
MTU value 78, 79
Multicast address 82
Multicast connection 78, 81
Multicast function 13
Multicasting 81
Multi-unicast 81
N
Navigation 30
Network 20, 77
Network connection 17, 25
Number of connections 28, 97
O
OF 21
Operation 9, 95
Overview of functions 13
P
Parameters 26, 119
Parity check 76
Partition 51
Partition status 53
Partitioning 51
Password 29, 34, 97
Peripheral control 98
Picture settings 37
Pin assignment 117
Playback 101
Playback button 102
Player 105
Port 78, 82
Post-alarm profile 58
Post-alarm time 58
Power off 25
Power on 25
Power supply 9, 17, 25
Power switch 25
Processor load 116
Processor load indicator 116
Product name 86
Profile configuration 40
Profiles 38
Protocol 76
R
RADIUS 80
V3.0 | 2007.09
Rear panel connections 17
Reboot 26, 119
Receiver 13
Receiver password 63
Recording profiles 57
Recording program 100
Recording scheduler 59
Recording status 60
Recording video sequences 100
Reflections of light 66
Regulations 7
Relay 17, 23
Relay output 73
Relay outputs 23
Remote control 14
Remote indication 23
Remote LED 23
Repair 9, 110
Reset 17, 109
Ring mode 55
Router 82
S
Safety 9
Saturation 37
Saving event log 88
Saving system log 88
Scope of delivery 11
Screen resolution 12, 27, 95
Select area 67, 69
Selecting a profile 38
Sensor fields 67, 69
Serial interface 17
Serial number 8
Serial port function 75
SFP 17, 21
Signal source 22
SMS 70
Snapshots 14, 100
SNMP 80
SNTP server 36
Software decoder 108
Source type 43
SSL certificate 92
SSL encryption 64
Standard profile 58
Standard recording profile values 57
Stop bits 76
Storage information 47, 50
Storage medium 47
Streaming 82
Subnet mask 78
Summer time 36
Symbols 7
Synchronize 35
System log 88, 99
System requirements 12, 27, 95
T
Tamper detection 68
Target data rate 41
TCP 63, 78
Terminal 75
Installation and Operating Manual
Bosch Security Systems
VideoJet X10
Index | en 129
Termination 43
Test 93
Time 24, 32, 35
Time server 35
Time server IP address 36
Time server protocol 35
Time signal 35
Time zone 36
TLS 79
Transfer protocol 63, 78
Transmission parameters 118
Transmission rate 76
Transmission standards 22, 116
Transparent 75
Traps 80
Trigger relay 74
TTL 82
U
UDP 63, 78
Unicast 81
Unit date 35
Unit ID 31
Unit identification 31
Unit name 31
Unit reset 109
Unit time 35
URL 28, 96
USB interface 16
User name 34
V
VCR 43
Video content analysis 65
Video input 43
Video loss alarm 61
Video sensor 65
Video signal interruption 61
W
Watermarking 33
Bosch Security Systems
Installation and Operating Manual
V3.0 | 2007.09
130 en | Index
V3.0 | 2007.09
VideoJet X10
Installation and Operating Manual
Bosch Security Systems
Bosch Security Systems
Robert-Koch-Straße 100
D-85521 Ottobrunn
Germany
Telefon
089 6290-0
Fax
089 6290-1020
www.bosch-securitysystems.com
© Bosch Security Systems, 2007
Download PDF

advertising