Bowers & Wilkins 202i User's Manual

Bowers & Wilkins 202i User's Manual
202i
Stand-mount/Bookshelf loudspeaker system
Product Summary
●
The 200 series was deemed as the rarity in the mass consumer hi-fi market – a reasonably
priced loudspeaker that provided high sensitivity, extended linear frequency response and
pinpoint stereo imaging.
●
The 202i loudspeaker system is a fourth-order vented loudspeaker system. The speaker
3
comprises of a /4 -in high frequency with a polyamide dome and one 7in low frequency
polypropylene cone.
●
The B&W wall bracket accessory permits easy, multi-directional positioning on walls.
Technical highlights
●
The Design incorporates a cabinet profile and wedge shaped grilles on acoustically
transparent frames.
●
The magnetic fluid-cooled voice coils are a B&W hallmark, wound on glass reinforced
Kapton® formers, enabling the drivers to take the heat when reproducing modern digital
recordings.
●
In common with B&W tweeters, the lightweight units incorporate low viscosity magnetic fluids
to offer excellent power handling and linearity.
Drive Units
1 x 19mm high-frequency with polyester
Power Handling
dome
Continuous
1 x 180mm low frequency with
Dimensions
composite short fibre cone
Frequency Response 48Hz – 20kHz ± 3dB on reference axis
Sensitivity
Suitable for amplifiers up to 120W
Height: 497mm Width: 225mm
Depth: 222mm
Finish
Black ash vinyl
90dB spl(2.83V 1m)
Nominal Impedance 4 ohms
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
www.bwspeakers.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement