DM330i
Stand-mount/Bookshelf loudspeaker system
Product Summary
●
The DM330i is a 2
1
/
2
-way closed-box stand mount/bookshelf loudspeaker system.
● Super sensitive, with high acoustical output yet affordable.
Technical highlights
●
Modal analysis techniques revealed a simple bonding technique of corner joints could improve rigidity and reduce coloration.
● New thinking on crossover design has also led to the provision of higher safe power handling and fuse protection overload.
●
The driver chassis have non-magnetised castings for all the bass midrange units ensuring resonance free high-level sound of the highest amplitude.
Drive Units 1 x 26mm high-frequency driver with dome/coil construction of special polymide material
2 x 200mm nominal piston dia and
26mm high temperature voice coil with critically impregnated composite short fibre cone
Frequency Response ± 3dB 48Hz to 20kHz
Sensitivity
Power Handling
Dimensions
Finish
91dB spl (2.83V, 1m)
10W – 100W
Height: 857mm Width: 290mm
Depth: 320mm
American Walnut or Black Ash vinyl
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
www.bwspeakers.com