Advertisement
Advertisement
DI-1
Single Channel Active Direct Box
Phantom, Battery or Plug Pack powered in a rugged steel chassis http://www.arx.com.au
The ARX DI-1 is a major step forward in active direct boxes. Using a single channel based on the successful DI-6, the DI-1 represents a fresh look at active D.I. concepts.
• Precision engineered
Ultra quiet, ultra clean circuitry delivers maximum headroom whatever the signal. Premium grade components, plus a steel chassis gives excellent hum and noise specifications in a tough, roadworthy package.
• Gain control
By using a rotary control rather than a simple switch, the DI-1 can be set up to handle the most complex signal. Gain is fully adjustable from 0 dB through to +20 dB, making it suitable for all applications, from the softest keyboard to the hottest broadcast levels.
• Battery compartment
The simple ‘twist-and-slide’ action of the DI-1 battery compartment makes battery changing a breeze, even on the darkest stages. No tools required, no screws to lose. Production crew heaven!
•Automatic Phantom switching
The DI-1 will automatically switch itself to the console’s own Phantom
Power, if available, and an LED will indicate this mode. Turn the Phantom Power off and it will revert back to battery mode.
• Multiple power options
The DI-1 runs on 2 x 9 volt batteries, but if they die, it also has a DC input connector, so you can run it from any DC power pack such as a guitar pedal power supply. Now the show can go on, whatever happens.
• Not too compact
A lot of direct boxes are fitted into brittle cast alloy cases. Not this one!
The custom aluminium extrusion surrounding the DI-1, plus its steel innner chassis with 2 batteries make it a solid unit that is hard to dislodge, hard to leave behind, and also harder for people to put in their pockets!
Whether you’re a Studio or Live
Sound engineer, installation contractor, or broadcast engineer, you want all the dynamics and clarity of the original sound transferred to the mixing console. If you’re a musician, then you need to be sure that what you play is what the audience hears. After all, if your sound isn’t important, why bother playing?
The ARX DI-1 provides a rugged, no-compromise solution to all direct injection signal requirements.
Specifications
Maximum Input
+15 dB
Maximum Output
+16 dB into 1 K ohm
+21 dB into 10 K ohm
Output Signal/Noise
-98 dB Unweighted
-103 dB A weighted
(input grounded)
Dynamic Range
119 dB
Distortion
100 Hz .0038%
1 KHz .0032%
10 KHz .0037%
Frequency Response
25Hz to 20KHz ± 0.5dB
into 1 Kohm load
Gain Control
0 dB to +20dB
Gain through unit
Minimum 6 dB
Size
2"H x 4"W x 5"D
50 x 100 x 125mm
Power
2 x 9 v batteries
Phantom power
Any suitable external
DC supply
(eg.foot pedal pack)
ARX Systems Pty Ltd, Australia; Phone: +61-3 9555 7859 Fax: +61-3 9555 6747
©1997 ARX Systems Pty.Ltd. ACN 006 471
825. All rights reserved. ARX Systems® is a Registered Trade Mark.
AFW-1
DI-2
Dual Channel Active Direct Box
Input
Phantom, Battery or Plug Pack powered
Output
300 Ohm Balanced
150 Ohm Unbalanced
Nominal Operating Level
0 dB
Maximum Input Level
+20 dB
Maximum Output Level
+20 dB EQ section only
+10 dB FBX in
Signal to Noise Ratio
–86 dB ‘A’ Weighted
EQ section only
–98 dB Unweighted
Distortion
0.004% EQ section only
0.02% FBX in measured@ 1 KHz, +4dB
Frequency Response
20 Hz to 20 KHz, ±0.5 dB
Equalizer Filters
30 x Constant Q on standard ISO frequencies
FBX Filters
6 fixed, 3 dynamic of the DI-2 battery compartment makes battery changing a breeze, even on the darkest stages. No tools required, no screws to lose. Production crew heaven!
•Automatic Phantom switching
The DI-2 will automatically switch itself to the console’s own Phantom
Power, if available, and an LED will indicate this mode. Turn the Phantom Power off and it will revert back to battery mode.
• Multiple power options
Amber LED
FBX Filter Range
51Hz to 17 KHz
FBX Filter Width
1/5th or 1/10th octave
Switchable; refer to manual
FBX Filter Depth
0dB to –40dB
FBX Filter Reset Time
4 seconds
Peak Limiter Threshold
Variable –10 dB to +10 dB
Limiter Status Metering
Red LED: Limiter Active
AC requirements
Size
100–120, 220–240 VAC,
50-60Hz, 18 VA
The simple ‘twist-and-slide’ action
482 x 88 x 230 mm
19”W x 3½”H x 9”D
The DI-2 runs on 2 x 9 volt batteries, but if they die, it also has a DC input connector, so you can run it from any DC power pack such as a guitar pedal power supply. Now the show can go on, whatever happens.
• Not too compact
A lot of other direct boxes are fitted into brittle cast alloy cases. Not this one! Computer aided high density design has allowed ARX to slip two channels of ultra high quality DI circuitry into the same custom aluminium extrusion that surrounds the DI-2, making it a solid unit that is hard to dislodge, hard to leave behind, and also harder for people to put in their pockets!
Whether you’re a Studio or Live
Sound engineer, installation contractor, or broadcast engineer, you want all the dynamics and clarity of the original sound transferred to the mixing console. If you’re a musician, then you need to be sure that what you play is what the audience hears. After all, if your sound isn’t important, why bother playing?
Our policy is one of continuous improvement, and therefore designs may change without notice. However, unless otherwise stated, specifications will always equal or exceed those
The ARX DI-2 provides a userfriendly, no-compromise solution to all direct injection signal requirements.
previously given.
ARX Systems Pty Ltd, Australia; Phone: +61-3 9555 7859 Fax: +61-3 9555 6747
http://www.arx.com.au
Specifications
Maximum Input
+15 dB
Maximum Output
+16 dB into 1 K ohm
+21 dB into 10 K ohm
Output Signal/Noise
-98 dB Unweighted
-103 dB A weighted
(input grounded)
Dynamic Range
119 dB
Distortion
100 Hz .0038%
1 KHz .0032%
10 KHz .0037%
Frequency Response into 1 Kohm load
Gain Control
0 dB or –20dB Pad switch
Size
0 dB or +10dB Gain switch
2"H x 4"W x 5"D
50 x 100 x 125mm
Power
2 x 9 v batteries
Phantom power
Any suitable external
DC supply
©1997 ARX Systems Pty.Ltd. ACN 006 471 825.
All rights reserved. ARX Systems® is a Registered
Trade Mark.
Advertisement