PRODUCT SPECIFICATION □ Tentative Specification □ Preliminary Specification ■ Approval Specification MODEL NO.: G170J1 SUFFIX: LE1 Customer: APPROVED BY SIGNATURE Name / Title Note Please return 1 copy for your confirmation with your signature and comments. Approved By Version 2.2 Checked By Prepared By 28 January 2014 1 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION - CONTENTS REVISION HISTORY ------------------------------------------------------- 3 1. GENERAL DESCRIPTION ------------------------------------------------------- 4 ------------------------------------------------------- 5 ------------------------------------------------------- 7 ------------------------------------------------------- 10 ------------------------------------------------------- 11 ------------------------------------------------------- 13 ------------------------------------------------------- 19 8. RELIABILITY TEST CRITERIA ------------------------------------------------- 21 9. PACKING 9.1 PACKING SPECIFICATIONS -------------------------------------------------- 22 ------------------------------------------------------- 24 ------------------------------------------------------- 25 ------------------------------------------------------- 26 1.1 OVERVIEW 1.2 FEATURES 1.3 APPLICATION 1.4 GENERAL SPECIFICATIONS 1.5 MECHANICAL SPECIFICATIONS 2. ABSOLUTE MAXIMUM RATINGS 2.1 ABSOLUTE RATINGS OF ENVIRONMENT 2.2 ELECTRICAL ABSOLUTE RATINGS 2.2.1 TFT LCD MODULE 2.2.2 LED CONVERTER 3. ELECTRICAL CHARACTERISTICS 3.1 TFT LCD MODULE 3.2 LED CONVERTER 4. BLOCK DIAGRAM 4.1 TFT LCD MODULE 5. INTERFACE PIN ASSIGNMENT 5.1 TFT LCD MODULE 5.2 BACKLIGHT UNIT 5.3 COLOR DATA INPUT ASSIGNMENT 6. INTERFACE TIMING 6.1 INPUT SIGNAL TIMING SPECIFICATIONS 6.2 POWER ON/OFF SEQUENCE 6.3 THE INPUT DATA FORMAT 7. OPTICAL CHARACTERISTICS 7.1 TEST CONDITIONS 7.2 OPTICAL SPECIFICATIONS 9.2 PACKING METHODS 10. DEFINITION OF LABELS 10.1 CMO MODULE LABEL 11. PRECAUTIONS 11.1 ASSEMBLY AND HANDLING PRECAUTIONS 11.2 SAFETY PRECAUTIONS 12. MECHANICAL CHARACTERISTIC Version 2.2 28 January 2014 2 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION REVISION HISTORY Version Date Section Description 2.0 2012.3.22 All Approval spec was first issued 2.1 2013.3.19 3.2 Add Converter Inrush current item and Note(3) Add Vi rising time scheme 6.2 Version 2.2 Update POWER ON/OFF SEQUENCE 28 January 2014 3 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION 1. GENERAL DESCRIPTION 1.1 OVERVIEW G170J1- LE1 is a 17” TFT Liquid Crystal Display module with LED backlight unit and 30-pin-and-1ch LVDS interface. This product supports 1920 x 1200 WUXGA format and can display true 16.7M colors. The converter for LED backlight is built-in. 1.2 FEATURES - Excellent brightness (600 nits) - High color saturation NTSC 70% - WUXGA (1920 x 1200 pixels) resolution - DE (Data Enable) only mode - LVDS (Low Voltage Differential Signaling) interface - Ultra wide viewing angle: 176(H)/ 176(V) (CR>10) -Wide operation and storage temperature range 1.3 APPLICATION - TFT LCD monitor for Industrial application 1.4 GENERAL SPECIFICATI0NS Item Active Area Bezel Opening Area Driver Element Pixel Number Pixel Pitch Pixel Arrangement Display Colors Display Operation Mode Surface Treatment Total power consumption(typ) Specification 365.76 (H) x 228.6 (V) 369 (H) x 231.8 (V) a-si TFT active matrix 1920 x R.G.B. x 1200 0.1905 (H) x 0.1905 (V) RGB vertical stripe 16.7 M Transmissive mode / Normally black Glare 25.45 Unit mm mm pixel mm color W Note (1) typ Note (1) Please refer to the attached drawings for more information of front and back outline dimensions. 1.5 MECHANICAL SPECIFICATIONS Item Horizontal (H) Module Size Vertical (V) Depth (D) Weight Min. 386.2 250.2 18.25 - Typ. 386.8 250.8 18.6 1675 Max. 387.4 251.4 18.95 1745 Unit mm mm mm g Note (1) - Note (1) Please refer to the attached drawings for more information of front and back outline dimensions. Version 2.2 28 January 2014 4 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION 2. ABSOLUTE MAXIMUM RATINGS 2.1 ABSOLUTE RATINGS OF ENVIRONMENT Item Value Symbol Operating Ambient Temperature Storage Temperature Min. -20 -40 TOP TST Unit Max. +80 +85 Note ºC ºC Note (1) Temperature and relative humidity range is shown in the figure below. (a) 90 %RH Max. (Ta ≦ 40 ºC). (b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC). (c) No condensation Relative Humidity (%RH) 100 80 60 Operating Range 40 20 Storage Range -40 -20 0 20 40 60 80 100 Temperature (ºC) Version 2.2 28 January 2014 5 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION 2.2 ELECTRICAL ABSOLUTE RATINGS 2.2.1 TFT LCD MODULE Item Symbol Power Supply Voltage VCC Value Min. Max. -0.3 7 Unit Note V (1) 2.2.2 LED CONVERTER Item Converter Voltage Enable Voltage Backlight Adjust Symbol Vi EN ADJ Value Min. -0.3 ----- Max. 24 5.5 5.5 Unit Note V V V (1), (2) Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation should be restricted to the conditions described under Normal Operating Conditions. Note (2) Specified values are for LED light bar (Refer to 3.2 for further information). Version 2.2 28 January 2014 6 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION 3. ELECTRICAL CHARACTERISTICS 3.1 TFT LCD MODULE Ta = 25 ± 2 ºC Parameter Symbol Power Supply Voltage Rush Current Min. 4.5 950 450 --100 0.7 VCC IRUSH White Black Power Supply Current - Power Consumption LVDS differential input voltage LVDS common input voltage PL |VID| VICM Value Typ. 5 1050 550 5.25 - Max. 5.5 3.0 1150 650 --600 1.6 Unit Note V A mA mA W mV V (1) (2) (3) - Note (1) The assembly should be always operated within above ranges. Note (2) Measurement Conditions: +5V Q1 2SK1475 Vcc C3 FUSE R1 (LCD Module Input) 1uF 47K (High to Low) (Control Signal) Q2 R2 2SK1470 SW 1K +12V 47K C2 VR1 C1 0.01uF 1uF VCC rising time is 470us +5V 0.9Vcc 0.1Vcc GND 470µs Note (3) The specified power supply current is under the conditions at Vcc = 5 V, Ta = 25 ± 2 ºC, fv = 60 Hz, whereas a power dissipation check pattern below is displayed. Version 2.2 28 January 2014 7 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION b. Black Pattern a. White Pattern Active Area Active Area c. Vertical Stripe Pattern R G B R G B B R G B R G B R B R G B R G B R R G B R G B Active Area 3.2 LED CONVERTER Ta = 25 ± 2 ºC Parameter Symbol Value Typ. 12.0 Max. 16 Unit Note V (Duty 100%) @ Vi = 12V (Duty 100%) (3) @ Vi = 12V (Duty 100%) Converter Power Supply Voltage Vi Min. 9 Converter Power Supply Current Ii 1.58 1.68 1.78 A Converter Inrush Current IiRush - - 3.8 A LED Power Consumption PLED --- 20.2 --- W 2.0 0 2.0 0 5 --------- 5 0.8 5 0.15 100 V V V V % fPWM 190 200 210 Hz LL 30,000 Backlight on Backlight off PWM High Level PWM Low Level EN Control Level PWM Control Level PWM Control Duty Ratio PWM Control Frequency LED Life Time Hrs (2) Note (1) LED current is measured by utilizing a high frequency current meter as shown below: Note (2) The lifetime of LED is defined as the time when it continues to operate under the conditions at Ta = 25 ±2 ℃ and ILED = 20mADC(LED forward current) until the brightness becomes ≦ 50% of its original value. Note (3) Converter Power Supply Voltage rising time is 10ms from 0.1Vi to 0.9Vi Version 2.2 28 January 2014 8 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION Vi rising time is 10ms +12V 0.9Vi GND 0.1Vi 10ms Input Power Output Power Pi Po Vi, Ii Power Supply Vo, Io Converter GND LED Backlight Unit LED BL Block Diagram Backlight Unit (11S8P x 3) LED power source LED power source LED power source Enable DC 12V Dimming Dimming Dimming System Board (10pin connector) Version 2.2 28 January 2014 9 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION 4. BLOCK DIAGRAM 4.1 TFT LCD MODULE RX3(+/-) RXCLK(+/-) VCC GND Vi Version 2.2 INPUT CONNECTOR RX2(+/-) ( Molex 5018643091) RX1(+/-) TIMING CONTROLLER SCAN DRIVER IC RX0(+/-) TFT LCD PANEL (1920x3x1200) DATA DRIVER IC DC/DC CONVERTER & REFERENCE VOLTAGE CONVERTER CONNECTOR (Molex 436501013) Converter 28 January 2014 LED BACKLIGHT UNIT 10 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION 5. INTERFACE PIN ASIGNMENT 5.1 TFT LCD MODULE Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol RXO0RXO0+ RXO1RXO1+ RXO2RXO2+ VSS RXOCRXOC+ RXO3RXO3+ RXE0RXE0+ VSS RXE1RXE1+ VSS RXE2RXE2+ RXECRXEC+ RXE3RXE3+ VSS VSS NC AGMODE Vcc Vcc Vcc Description -LVDS differential data input, Chan 0-Odd +LVDS differential data input, Chan 0-Odd -LVDS differential data input, Chan 1-Odd +LVDS differential data input, Chan 1-Odd -LVDS differential data input, Chan 2-Odd +LVDS differential data input, Chan 2-Odd Ground -LVDS differential Clock input (Odd) +LVDS differential Clock input (Odd) -LVDS differential data input, Chan 3-Odd +LVDS differential data input, Chan 3-Odd -LVDS differential data input, Chan 0-Even +LVDS differential data input, Chan 0-Even Ground -LVDS differential data input, Chan 1-Even +LVDS differential data input, Chan 1-Even Ground -LVDS differential data input, Chan 2-Even +LVDS differential data input, Chan 2-Even -LVDS differential Clock input (Even) +LVDS differential Clock input (Even) -LVDS differential data input, Chan 3-Even +LVDS differential data input, Chan 3-Even Ground Ground No Connection Aging mode selection [Default connection GND] +5.0V power supply +5.0V power supply +5.0V power supply Note - - Note (1) Connector Part No.: MOLEX (5018643091) 5.2 BACKLIGHT UNIT (Converter connector pin) Pin 1 2 3 4 5 6 7 8 9 10 Symbol ADJ3 ADJ2 ADJ1 EN VGND VGND VGND Vi Vi Vi Description Area3 adjust Area2 adjust Area1 adjust Enable pin Converter ground Converter ground Converter ground Converter input voltage Converter input voltage Converter input voltage Remark PWM Dimming PWM Dimming PWM Dimming 3.3V Ground Ground Ground 12V 12V 12V Note (1) Connector Part No.: MOLEX (436501013) Version 2.2 28 January 2014 11 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION 5.3 COLOR DATA INPUT ASSIGNMENT The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color. The higher the binary input, the brighter the color. The table below provides the assignment of color versus data input. Data Signal Color Red Green Blue R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Basic Blue 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Colors Cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Red(0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(1) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(2) 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Red(253) 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green(0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 Green(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Green(253) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 Green(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 Green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Blue(0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 Blue(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Blue(253) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 Blue(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 Blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Gray Scale Of Red Gray Scale Of Green Gray Scale Of Blue Note (1) 0: Low Level Voltage, 1: High Level Voltage Version 2.2 28 January 2014 12 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION 6. INTERFACE TIMING 6.1 INPUT SIGNAL TIMING SPECIFICATIONS The input signal timing specifications are shown as the following table and timing diagram. Signal Item Frequency DCLK Symbol Min. Typ. Max. Unit Fc - 154.13 159.26 MHZ Input clock to data skew TLVCCS -0.25 Total Tv Vertical Active Display Term Display Blank Total Horizontal Active Display Term Display Tvd Tvb Th 0.25 ns 1202 1235 1200 1200 1235 Th Tv=Tvd+Tvb 1200 Th 35 2000 2080 1920 1920 80 160 35 2080 Th Tc Th=Thd+Thb 1920 160 Tc Tc 2 Thd Thb Blank - Note (3) - - Note (1) Since this assembly is operated in DE only mode, Hsync and Vsync input signals should be set to low logic level. Otherwise, this assembly would operate abnormally. (2) Frame rate is 60Hz INPUT SIGNAL TIMING DIAGRAM Tv Tvd Tvb DE Th DCLK Tc DE Thd Thb DATA Version 2.2 Valid display data 28 January 2014 13 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION Note (3) Input Clock to data skew is defined as below figures. 6.2 POWER ON/OFF SEQUENCE To prevent a latch-up or DC operation of LCD assembly, the power on/off sequence should be as the diagram below. 0.9VCC 0.9VCC 90% 0.1VCC VCC 0.1VCC 10% T7 T1 T2 T3 VALID LVDS Vi T4 0.9Vi 0.9Vi 0.1Vi 0.1Vi T6 T5 90% BL ON/OFF 10% T8 T9 90% PWM DIMMING 10% Power ON/OFF sequence Note (1) Please avoid floating state of interface signal at invalid period. Note (2) When the interface signal is invalid, be sure to pull down the power supply of LCD VCC to 0 V. Note (3) The Backlight converter power must be turned on after the power supply for the logic and the interface signal is valid. The Backlight converter power must be turned off before the power supply for the logic Version 2.2 28 January 2014 14 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION and the interface signal is invalid. Parameter T1 T2 T3 T4 T5 T6 T7 T8 T9 Min 0.5 0 0 500 200 200 5 10 10 Value Typ - Max 10 50 50 100 - Units ms ms ms ms ms ms ms ms Ms 6.3 The Input Data Format Note (1) R/G/B data 7: MSB, R/G/B data 0: LSB Note (2) Please follow PSWG Version 2.2 28 January 2014 15 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION Note (3) Output signals from any system shall be low or Hi-Z state when VCC is off Version 2.2 28 January 2014 16 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION 7. OPTICAL CHARACTERISTICS 7.1 TEST CONDITIONS Item Ambient Temperature Ambient Humidity Supply Voltage Input Signal Converter Current Symbol Value Unit o Ta C 25±2 Ha %RH 50±10 VCC 5 V According to typical value in "3. ELECTRICAL CHARACTERISTICS" 20±1mA IL mA 7.2 OPTICAL SPECIFICATIONS The relative measurement methods of optical characteristics are shown in 7.2. The following items should be measured under the test conditions described in 7.1 and stable environment shown in Note (6). Item Contrast Ratio Symbol CR TR Response Time Center Luminance of White White Variation Red Green Chromaticity Blue White Viewing Angle Version 2.2 Horizontal Vertical Condition Min. 1500 - Typ. 2000 20 Max. 25 Unit ms TF - 9 15 ms LC δW Rx Ry Gx Gy Bx By Wx 500 - θx=0°, θY =0° Viewing angle at normal direction Typ. -0.05 0.329 Wy θx+ θxθY+ θY- 600 cd/m 1.2 1.4 0.629 0.341 0.3160 Typ. .622) 0.622 0.148 +0.05 0.070 0.313 CR≥10 80 80 80 80 88 88 88 88 28 January 2014 Note (2) (3) 2 (4) (6) (5) - Deg. (1) 17 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION Note (1) Definition of Viewing Angle (θx, θy): Viewing angles are measured by BM5A Normal θx = θy = 0º θyθX- = 90º 6 o’clock θy+ 12 o’clock direction xθx− y+ θx+ θy+ = 90º y- θy- = 90º x+ θX+ = 90º Note (2) Definition of Contrast Ratio (CR): The contrast ratio can be calculated by the following expression. Contrast Ratio (CR) = L255 / L0 L255: Luminance of gray level 255 L 0: Luminance of gray level 0 CR = CR (5), where CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note (7). Note (3) Definition of Response Time (TR, TF): Gray Level 255 Gray Level 255 100% 90% Optical Response Gray Level 0 10% 0% Time TF TR . Version 2.2 28 January 2014 18 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION Note (4) Definition of Luminance of White (LC): Measure the luminance of gray level 255 at center point and 5 points LC = L (5), where L (X) is corresponding to the luminance of the point X at the figure in Note (7). Note (5) Measurement Setup: The LCD assembly should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 30 minutes in a windless room. LCD Module LCD Panel USB2000 CS-1000T Center of the Screen Light Shield Room 500 mm Version 2.2 (Ambient Luminance < 2 lux) 28 January 2014 19 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION Note (6) Definition of White Variation (δW): Measure the luminance of gray level 255 at 5 points δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)] Horizontal Line D Vertical Line D/4 W/4 W D/2 1 W/2 3D/4 2 X 5 : Test Point X=1 to 5 3W/4 3 4 Active Area Version 2.2 28 January 2014 20 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION 8. RELIABIITY TEST CRITERIA Test Item High Temperature Storage Test Low Temperature Storage Test Thermal Shock Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Shock (Non-Operating) Vibration (Non-Operating) Test Condition 85ºC, 240 hours -30ºC, 240 hours -30ºC, 30min←→85℃, 30min; 100cycles, 80ºC, 240 hours -20ºC, 240 hours Note (1) (2) 60ºC, 90%RH, 240 hours 50G, 11ms, half sine wave, 3 time for ± X, ± Y, ± Z. 1.5Grms,10 ~ 300 Hz, 0.5 hour/cycle, 3 cycles each X, Y, Z (3) (3) Note (1) There should be no condensation on the surface of panel during test. Note (2) Temperature of panel display surface area should be 80 ºC Max. Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. Note (4) In the standard conditions, there is no function failure issue occurred. All the cosmetic specification is judged before the reliability test. Version 2.2 28 January 2014 21 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION 9. PACKAGING 9.1 PACKING SPECIFICATIONS (1) 8pcs LCD modules / 1 Box (2) Box dimensions: 615 (L) X 515 (W) X 320 (H) mm (3) Weight: approximately 21.1Kg (8 modules per box) 9.2 PACKING METHOD (1) Carton Packing should have no failure in the following reliability test items. Test Item Vibration Dropping Test Test Conditions ISTA STANDARD Random, Frequency Range: 2 – 200 Hz Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y) 1 Angle, 3 Edge, 6 Face, 46 cm Note Non Operation Non Operation Figure. 9-1 Packing method Version 2.2 28 January 2014 22 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION Sea / Land Transportation (40ft Container) Air Transportation Figure. 9-2 Packing method Version 2.2 28 January 2014 23 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION 10.DEFINITION OF LABELS 10.1 CMI MODULE LABEL The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation. CHI E207943 MEI G170J1 OPTOELECTRONICS -LE1 Rev.XX MADE IN TAIWAN RoHS XXXXXXXYMDLNNNN (a) Model Name: G170J1-LE1 (b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc. (c) Serial ID: X X X X X X X Y M D L N N N N Serial No. Product Line Year, Month, Date CMI Internal Use CMI Internal Use Revision CMI Internal Use Serial ID includes the information as below: (a) Manufactured Date: Year: 0~9, for 2010~2019 Month: 1~9, A~C, for Jan. ~ Dec. st st Day: 1~9, A~Y, for 1 to 31 , exclude I ,O, and U. (b) Revision Code: Cover all the change (c) Serial No.: Manufacturing sequence of product (d) Product Line: 1 -> Line1, 2 -> Line 2, …etc. Version 2.2 28 January 2014 24 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION 11. PRECAUTIONS 11.1 ASSEMBLY AND HANDLING PRECAUTIONS (1) Do not apply rough force such as bending or twisting to the module during assembly. (2) It is recommended to assemble or to install a module into the user’s system in clean working areas. The dust and oil may cause electrical short or worsen the polarizer. (3) Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight. (4) Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the damage and latch-up of the CMOS LSI chips. (5) Do not plug in or pull out the I/F connector while the module is in operation. (6) Do not disassemble the module. (7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) Moisture can easily penetrate into LCD module and may cause the damage during operation. (9) High temperature or humidity may deteriorate the performance of LCD module. Please store LCD modules in the specified storage conditions. (10) When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the response time will become slow, and the starting voltage of backlight will be higher than that of room temperature. (11) Do not keep same pattern in a long period of time. It may cause image sticking on LCD. 11.2 SAFETY PRECAUTIONS (1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (2) After the module’s end of life, it is not harmful in case of normal operation and storage. Version 2.2 28 January 2014 25 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] PRODUCT SPECIFICATION 12. MECHANICAL CHARACTERISTICS Version 2.2 28 January 2014 26 / 27 The copyright belongs to InnoLux. Any unauthorized use is prohibited. Provided by www.display-solution.com [email protected] Provided by www.display-solution.com [email protected] Provided by www.display-solution.com [email protected]
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement