2016 Vert-I-Pak Brochure
Single Package Vertical Air Conditioners
Vert-I-Pak Series
®
Installs easily in a closet for quiet operation
FRIE DRICH.COM THE EXPERTS IN ROOM AIR CONDITIONING
Vert-I-Pak®
A Better Solution for Hospitality
and Multi-Family Suites
Vert-I-Pak® is a quiet, energy efficient option for
extended stay properties, suites, assisted living,
student housing and commercial spaces.
Ducted and closet-mounted, Vert-I-Pak eliminates the need for multiple
through the wall units. The packaged Vert-I-Pak unit is installed out of sight,
so guests enjoy a more attractive, more homelike appearance.
Electric Heat
Heat Pump
COOLING
8900-23000 Btu
Up to 10.7 EER
COOLING
8900-23000 Btu
Up to 10.7 EER
ELECTRIC HEAT
8500-34130 Btu
REVERSE HEATING
8600 -20000 Btu
All 3.0 COP
AUXILIARY
ELECTRIC HEATING
8500-34130 Btu
2 | FRIEDRICH SINGLE PACKAGE VERTICAL AIR CONDITIONERS
Better Aesthetics
Outdoors
Packaged unit eliminates the clutter of outdoor
condensing units and the sleek architectural
grille is available in custom colors to match the
building’s exterior.
Indoors
The unit is installed out of sight, so all the guest
sees is a wall thermostat.
VERT-I-PAK® IS A SUPERIOR PRODUCT
What you’ll find on
Friedrich Vert-I-Pak
®
1.
Floating chassis design slides into a wall plenum and is
held firmly in place by a sealing gasket, reducing noise
from vibration transfer.
2.
½ inch foil-backed insulation added on the inside of the
chassis to reduce sound transmission into the guest room.
3.
Efficiencies above industry standards with EERs up to 10.7.
4.
Condensate removal system uses slinger ring technology to
cool the coil and increase efficiency.
5.
Dynamically balanced blower with large, vibrationabsorbing motor mounts for smooth and quiet operation.
6.
Patented telescoping plenums (accessory) easily adapt to
more installations.
7.
5 year limited warranty* (on the sealed system) includes
labor.
What you'll find on many competitor's
products
1.
Chassis is screwed into the wall plenum. Metal-on-metal
contact transfers vibration, increasing operating noise
under typical conditions. Noise is transferred through the
walls and into the room.
2.
No insulation on the unit to reduce noise transmission into
the guest room.
3.
Hard plastic feet on the unit base which are less durable
and transfer harsh vibration noise.
4.
Different plenums needed based on varying wall depths.
5.
No labor warranty.
* See warranty documentation for details.
3
Friedrich engineered for quieter performance
Friedrich’s ‘Free Floating’ chassis design and superior insulation
help to eliminate vibration noise
The chassis slides into the wall plenum and a gasket firmly seals the chassis to the patented telescoping plenum.
This eliminates vibration noises that are transmitted into the room in competitor’s metal-on-metal fixed installations.
Extra thick, vibration-absorbing rubber grommets mounted on durable base that is engineered for structural and
acoustic integrity.
Foil-backed, 1/2” insulation
blanket inside the cabinet
reduces sound transmitted
into the guest room
TYPICAL VERT-I-PAK® INSTALLATION
ACCESS DOOR OR PANEL TO CLOSET
CAN BE INSTALLED FROM 3 SIDES
Rigid Ductwork
Field-supplied
Filter (25" x 20")
58"
Exterior Wall
Flexible Ductwork
VPAWP1-8/1-14 Wall Plenum
Power
Disconnect
Plenum
Divider
29"
VPRG4 Access Panel &
Return Air Filter Grille
Optional field
installed drain pan
(refer to local codes)
Optional Platform
3" Clearance on all
three sides minimum for
service and installation
4 | FRIEDRICH SINGLE PACKAGE VERTICAL AIR CONDITIONERS
Chassis is
shipped with
vibration
isolators
installed
VPDP1 drain pan beneath
unit is required on all
VEA/VHA24 units. Drain
pan must be installed prior
to chassis installation
VERT-I-PAK® ADVANTAGES
A better heating and cooling
option inside and out
A better choice than whole
building solutions
• Eliminates the clutter of outdoor
condensing units and the need for
vandalism barriers.
• Lower installed cost
• Completely self-contained
• Individual temperature set point
(one unit can heat and others can
cool)
• No refrigerant lines running from
floor to floor
• Fast, easy replacement keeps
spaces livable
Improved guest comfort
• Individually controlled
• Heat and cool
Warranty and Support
• Industry leading warranty features 1 year
full warranty on parts and labor and 5 year
limited warranty.
• Independent metering (no need to
prorate for multitenant applications)
• Less risk, with a whole building
system, spaces may become
uninhabitable until the system is
repaired or replaced
• Nationwide service network and
U.S. based Friedrich expert technical
team ensures you get fast, knowledgeable
service.
PARTS &LABOR
WARRANTY
PARTS
L I M&I LABOR
TED
WARRANTY
WARRANTY
LIMITED
WARRANTY
• Vert-I-Pak can be easily accessed for
maintenance or replacement
• Duct air specifically where it’s
needed, not just on the outside wall
• 2-speed fan with constant fan
option on Friedrich RT6 and WRT1
thermostats
FEATURES
Reliable and durable
Easy installation
•PSC permanently lubricated motor
for low maintenance and maximum
efficiency
• Can be installed from any interior
side (front, right or left)
• Engineered drain pan won’t rust,
eliminating the risk of unsightly rust
stains from condensation on the
building exterior
• Compact and lightweight, weighs as
little as 114 lbs.
• Painted, 18-gauge galvanized steel
cabinet resists corrosion
• Standard safety power disconnect
• Electronic control panel on unit for
easy diagnostics and servicing
• 100% run tested prior to shipmentEvery unit is tested in every operating
mode before it ships for optimal
performance and reliability
• Ductable to multiple rooms
• Installation does not require an HVAC
technician
• Prewired, charged and piped
• All units are ready to install with only
electrical hook up needed to be up
and running
Energy management thermostats
available
• Wired and wireless thermostats
• Integrated motion and thermal
occupancy sensor
• Auto changeover
• 5 distinct energy presets
• Comprehensive remote management
capability**
• 10” crimped and beaded duct-collar
ready to attach flex duct
• Patented telescoping wall plenums
adjust to fit varying exterior wall
thicknesses
• Primary condensate removal system
provided thru 3/4” pipe fittings for
more placement options
• Secondary overflow from primary
drain*
• Central desk control ready
• 24-volt remote wireless or wired
thermostat ready
Protects the outdoor coil against deterioration
and extends the life of the unit especially in harsh
coastal environments.
• All units are shipped (on pallet) with
return air filter
* 24000 Btu model uses secondary gravity-fed drain. ** Energy management capability requires purchase of additional hardware and service fee
5
Easily replace older First Company vertical units*
®
Vert-I-Pak® is an exact fit for existing First Company SPXR-series single package vertical units when
installed with the VPASA1 Sleeve Adapter.
EXACT FIT to
First Company
sleeve
SINGLE-PIECE
welded adapter for a
rigid installation
NO EXPENSIVE
CUTTING or
RE-SIZING
of wall opening
necessary
EASY
CONNECTION to
Friedrich chassis
Sleeve Adapter Kit
SAVE ON ENERGY COSTS WITH HIGHER EFFICIENCY
®
VERT-I-PAK UNITS
Friedrich Vert-I-Pak
First
Company
9000 Btu A/C
10.7 EER
9.0 EER
12000 Btu A/C
10.5 EER
9.0 EER
18000 Btu A/C
9.0 EER
9.0 EER
9000 Btu HP
10.7 EER
9.0 EER
12000 Btu HP
10.3 EER
9.0 EER
18000 Btu HP
9.1 EER
9.0 EER
Replaces First
Company SPXR
Series
Friedrich Vert-I-Pak
IMPORTANT FEATURE COMPARISONS
Feature
Friedrich Vert-I-Pak
First Company
ARI Certification
YES
NO
Warranty
1st Year Bumper to Bumper, Parts
& Labor. 2nd - 5th Year Sealed
Refrigeration System, Parts & Labor
1st Year Parts Only.
2nd Year Compressor, Parts Only
Corrosion Protection
Standard
Not Available
Weight
114 Lbs. to 167 Lbs.
245 Lbs. to 255 Lbs.
Service/Support
• Dedicated Service/Sales/Order Support based in San Antonio, TX
• Ability to set up installer as warranty service agent
• Over 1,500 independent service agents throughout the U.S.
* SPXR-series models sold through Amana and Carrier.
Closet dimensional limitations apply. Sleeve adapter kit includes all parts necessary to mate with First Company sleeve.
Condensate drain connections, supply duct connections, and electrical connections remain the responsibility of equipment owner.
6 | FRIEDRICH SINGLE PACKAGE VERTICAL AIR CONDITIONERS
OPTIONAL ACCESSORIES
ARCHITECTURAL LOUVER
VPAL2 and VPSC2
Extruded aluminum grille that attaches to the outdoor section of the wall
plenum. Takes in fresh air and returns condensed air. VPSC2 can be ordered in
custom colors.
DIMENSIONS: 25 9/16" W x 31 1/16" H
WALL PLENUM
VPAWP1-8, VPAWP1-14
Two-part sleeve that telescopes in and out; sits inside the exterior wall
penetration.
VPAL2
VPAWP1-8 telescopes from 5 1/2”– 8”
VPAWP1-14 telescopes from 8”–14”
DIMENSIONS: 24 1/8” W x 30 3 /8” H
CUTOUT DIMENSIONS: 24 5 /8” W x 30 7/8” H
VPAWP1-8
RETURN AIR GRILLE/
ACCESS PANEL
VPRG4 / VPRG4R
Hinged panel allows access to unit and return air filter. A field-supplied filter (25” x 20”) should be mounted on the inside grille. Panel
can be mounted with return air openings high or low on the door for optimum
sound attenuation.
DIMENSIONS: 29” W x 58” H
CUTOUT DIMENSIONS: 27” W x 55 3 /4” H
VPRG4/
VPRG4R
FIRST COMPANY SLEEVE ADAPTER
VPASA1
Single piece, welded adapter allows retrofit into existing First Company ® SPXRseries single package vertical unit wall sleeve and louver. Easily connects to
Friedrich chassis.
SINGLE STAGE THERMOSTATS
RT6
Wired, single stage, wall-mounted digital thermostat has two fan speeds and
backlight. Controls Friedrich VERT-I-PAK.
VPASA1
WRT1
Wireless, single stage, wall-mounted digital thermostat has two fan speeds and
backlight. Controls Friedrich VERT-I-PAK.
ENERGY MANAGEMENT THERMOSTATS
EMRT1
Wired thermostat has occupancy sensor.
RT6WRT1
EMWRT1
Wireless thermostat has occupancy sensor.
EMOCT
EMRAF
Online connection kit. Remote access fee.
EMRHCF
Remote humidity control fee.
DRAIN PAN
VPDP1
For VEA/VHA24 models. May be installed prior to chassis for easy installation/
removal.
EMRT1, EMWRT1
VPDP1
7
SPECIFICATIONS
MODEL
VEA09K
VEA12K
VEA18K
VEA24K
VHA09K
VHA09R
VHA12K
VHA12R
VHA18K
VHA18R
VHA24K
VHA24R
23000/22700
9000/9000
9000
12000/12000
12000
17000/16800
16800
23000/22800
22500
COOLING DATA
COOLING BTU
9000/9000 12000/12000 17000/16500
POWER (W)
840/840
1145/1120
1890/1835
2420/2390
855/855
855
1165/1165
1190
1870/1845
1845
2525/2505
2475
EER
10.7/10.7
10.5/10.7
9.0/9.0
9.5/9.5
10.5/10.5
10.5
10.3/10.3
10.1
9.1/9.1
9.1
9.1/9.1
9.1
0.70
0.70
0.77
0.70
0.70
0.70
SENSIBLE HEAT RATIO
0.77
0.74
2.5/3.4/5.0
2.5/3.4/5.0
HEATING BTU
—
—
—
—
COP @ 47F
—
—
—
—
3.0/3.1
3.0
3.0/3.1
3.0
3.0/3.0
3.0
3.0/3.0
3.0
HEATING POWER (W)
—
—
—
—
830/795
845
1125/1060
1075
1560/1540
1550
1953/1953
1950
HEATING CURRENT (A)
—
—
—
—
3.7/3.9
3.2
4.8/5.0
4.1
7.5/8.2
6.5
8.5/9.4
8.1
HEATER SIZE (kW)
2.5/3.4/5.0 2.5/3.4/5.0/7.5/10.0 2.5/3.4/5.0
0.77
0.75
0.77
0.70
2.5/3.4/5.0
2.5/3.4/5.0
2.5/3.4/5.0
2.5/3.4/5.0
8650
11500/11200
11000
16000/15000
2.5/3.4/5.0 2.5/3.4/5.0/7.5/10.0 2.5/3.4/5.07/7.5/10.0
HEAT PUMP DATA
8480/8400
15900
20000/20000
20000
ELECTRICAL DATA
VOLTAGE (1 PHASE, 60 HZ)
230/208
230/208
230/208
230/208
230/208
265
230/208
265
230/208
265
230/208
265
VOLT RANGE
253-197
253-197
253-197
253-197
253-197
292/239
253-197
292/239
253-197
292-239
253-197
292-239
COOLING CURRENT (A)
3.9/4.2
5.1/5.4
8.1/8.6
10.0/10.4
3.8/3.9
3.8
5.3/5.6
4.7
8.2/8.6
6.9
10.9/10.6
9.7
AMPS L.R
21.0
29.5
42.0
46.0
21.0
21.0
30.0
30.0
42.0
42.0
46.0
46.0
AMPS F.L.
3.5
4.7
7.8
9.5
3.5
3.5
4.8
4.8
7.8
7.8
9.5
9.5
INDOOR MOTOR (HP)
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
INDOOR MOTOR (A)
1.2
1.2
1.2
1.9
1.2
1.2
1.2
1.2
1.2
1.2
1.9
1.8
OUTDOOR MOTOR (HP)
—
—
—
1/4
—
—
—
—
—
—
1/4
1/4
OUTDOOR MOTOR (A)
—
—
—
0.85
—
—
—
—
—
—
0.85
0.9
23”x23”x47”
23”x23”x32”
23x23x32
23”x23”x32”
23x23x32
23”x23”x47”
23”x23”x47”
PHYSICAL
DIMENSIONS (W X D X H)
23”x23”x32” 23”x23”x32” 23”x23”x32”
23”x23”x32” 23”x23”x32”
NET WEIGHT (LBS)
114
124
144
167
114
114
125
124
144
165
167
187
SHIPPING WEIGHT (LBS)
125
135
155
220
125
125
136
135
155
176
220
240
TEST SETTING
LOW
LOW
HIGH
LOW
LOW
LOW
LOW
LOW
HIGH
HIGH
LOW
LOW
R410A CHARGE (OZ)
41.5
45
48.1
65
38
39
39.5
37
48
48
65
65
AIRFLOW DATA
INDOOR CFM
LOW HIGH LOW HIGH LOW HIGH
.10” ESP.10” ESP
405
450
420
450
400
480
610
700
420
450
420
450
420
450
390
450
400
480
400
480
610
700
610
700
.15” ESP.10” ESP
375
420
405
425
375
465
585
670
405
425
405
425
405
425
375
425
375
465
375
465
585
670
585
670
.20” ESP.10” ESP
345
385
385
400
350
450
560
640
385
400
385
400
385
400
350
400
350
450
350
450
560
640
560
640
.25” ESP.10” ESP
325
365
355
375
330
390
535
610
355
375
355
375
355
375
325
375
330
390
330
390
535
610
535
610
.30” ESP.10” ESP
305
340
320
350
310
330
510
580
320
350
320
350
320
350
320
350
310
330
310
330
510
580
510
VENT CFM
60
60
60
LOW
HIGH
60
LOW HIGH LOW HIGH LOW HIGH LOW HIGH LOW HIGH LOW HIGH
60
60
60
60
60
60
LOW
HIGH
60
NOTES:
COOLING STANDARDS: 95°F DB/75°F WB OUTDOOR, 80°F DB/67°F WB INDOOR
HEATING STANDARDS: 47°F DB/43°F WB OUTDOOR, 70°F DB/60°F WB INDOOR
NORMAL VALUE WET COIL @ .1” ESP.
RATED CFM AT LOW SPEED: VEA09/VHA09….325 VEA12/VHA12….390
VEA18/VHA18….400 VEA24/VHA24….610
Due to continuing research in new energy-saving technology, specifications are subject to change without notice.
ULCDTP
Friedrich Air Conditioning Co. l 10001 Reunion Place, Suite 500 l San Antonio, TX 78216 l 877.599.5665 l www.friedrich.com
BRO_VPAK_COMM_2016_Rev.4
Printed in USA
LOW
HIGH
580
60
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement