- No category
advertisement
UMTS/HSPA
GPRS/EDGE
engine
Internal
SIM Card
Power supply
GSM
GNSS
CPU
BIOS
CAN
CAN-H
CAN-L
Power
Management
CAN
Transceiver
3)
BIOS
Backup battery
4)
Processor
(CPU) multi-GNSS
receiver
Sensors
8 2
8pin connector
7 1
GNSS antenna 2,3)
5
6
7
8
1
2
3
4
9
10
MOSI
USB_V+
MISO
DM
CLK
DP
Detect USB
+IN
CS
GND
1)
Optional
2)
Internal/External 2G+3G/GNSS antennas
3)
Activation with PFAL-Command
4)
Accessory
1
FALCOM
FALCOM, a storied M2M and IoT specialist from Germany, designs, manufactures and sells world-wide state-of-the-art devices, services and solutions ideally suited to numerous applications: fleet management, car sharing, usage-based insurance pricing, asset and workforce tracking and security, precision farming.
FOX3-3G
most developed and advanced tracking and data logging system with all options in one product
PRODUCT OVERVIEW
FOX3-3G is a compact, all-in-one device combining
2G/UMTS/HSPA high-speed data communication with the latest
GNSS technology to completely statisfy customer‘s need.
Depending on the requirements of the respective customer, the
IOBOX-MINI
4)
(13 IO ports) nedded hardware options can be decided shortly before installation. FOX3-3G is designed to operate with internal or external antennas. The built-in internal antennas can be turned off while external antennas are in use. Based on its features, this
IOBOX-CAN 4)
(CAN-Bus interface,
8 IO ports) device will dramatically simplify your logistics as well as the installation process and the post-installation support. Newly developed FALCOM „PREMIUM-Features“ show the way to the future of mobile data logging, storing, processing and sending.
FOX3-3G is a configurable smart tracking / data logging device which can be fully adapted to user requirements.
FOX3-3G offers new features like: DATA ENCRYPTION, several
HISTORY MODES or ECO-DRIVE/BEHAVIOUR LOGGING beside standard items like status reports, alerts messaging, audio call, spy calls or geofencing.
FOX3-3G
FOX3-3G BLOCK DIAGRAM
6 2
6pin connector
5 1
2G+3G antenna 2,3)
PRODUCT HIGHLIGHTS
State-of-the-art 3G/2G and GNSS technology
3-axis acceleration, internal temperature sensors
Gyro / Magnetic sensors (external only)
Drop-in replacement of previous FOX-generation
Sensor interface via RS-232 / RS-485 / 1-Wire / I²C / CAN
FALCOM PFAL programming language
Passive / active RFID connectivity via RS-232
Customizable firmware configuration
Multi-function I/Os
Optional battery back-up 4
Display connectivity (JAZZ2)
Audio interface (SPK+MIC)
Data-Logger functionality
3) CAN/FMS interface , CAN-OBDII (On-Board Diagnostics) 3)
4) Hardware expandable via IOBOX-MINI and IOBOX-CAN 4)
Internal 2G+3G/GNSS antennas and external antenna ports 3)
Communication via USB 2.0 interface
Support connection with Garmin devices
CE pending http://www.falcom.de
FALCOM
FIRMWARE FEATURES
Embedded TCP/IP stack for client-server application
FALCOM protocols: IOP, GSM, AREA, 3DP, BIN
Supports SMS /USSD/ Voice call /TCP/IP/UDP/SMTP/HTTP
Local and remote firmware update and configuration
Multi power-saving modes and wake up conditions
20 programmable Timers, Triggers, Counters, nvCounters
3000 programmable Geofences, 32 Areas, 2000 Waypoints
Report by distance, time, bearing and on demand and more
Drivers Logbook / History / Trip management
Intelligent and flexible configuration alarms
RFID and 1-Wire sensor-based application
FALCOM PREMIUM feature supported
Over-the air-access (OTA)
APPLICATIONS
Real time online tracking
Fleet management / monitoring
Security / Emergency / Insurance services (UBI)
Real time satellite navigation
Territory management
Personalized drivers logbook
Route verification
Trip management / distance calculations
Theft protection
Driving behaviour / Eco-Drive monitoring
Toll collection / pay as you drive (PAYD)
Compatible with FALCOM trace4you server (also configurable for most of TCP/IP server-based tracking applications)
trace4you evaluation platform
GNSS satelites
TECHNICAL SPECIFICATION
General
3G (UMTS/HSPA) and 2G (GSM/GPRS/EDGE) engine:
- 3G bands : 900/2100 MHz for Europe
850/1900 MHz for America
- 2G bands : 850/900/1800/1900 MHz
Internet (TCP/UDP/HTTP/SMTP)
2)
Multi channel GNSS (GPS+Galileo/GLONASS ) receive r
A-GPS (online / offline / autonomous)
Physical characteristics
Dimensions (LxWxH): 105 mm x 83 mm x 28 mm
Weight: approx. 130 g
Air humidity
5% up to 95% non-condensing
Interfaces
3 x Digital/analog IO ports (p rogrammable)
1 x Predefined digital input (Ignition)
Protocols: NMEA, FALCOM (binary)
Accuracy: GPS GLONASS
3 x LED indicators ( programmable)
2
2) 4)
x RS-232 Ports (1xV.24 level; 1xRS-232/RS-485 )
P osition: 2.5 m 4.0 m 1 x 10pin Mini-USB connector (for IOBOX-MINI
1)
)
Acquisition / Sensitivity: 1 x 1-Wire interface (incl. 5V Phantom Power)
Cold Start: 29 s 30 s
Tracking: -161 dBm -158 dBm 1 x 4pin audio jack interface (2.5mm)
Sensitvity: -148 dBm -145 dBm
GPS Operational limits:
1 x
2) 4)
CAN-Bus Interface (uses 2 of 3 I/Os)
1 x Inside SIM card holder for 1,8/3 V SIM cards
Velocity: 500 m/s (972 knots) 1 x USB 2.0 interface
Altitude: 50.000 m
Update rate: 1 Hz
Electrical characteristics
Power supply: +10,8 V to +32,0 V DC
Optional Li-Polymer 1000 mAh rechargeable battery
1)
Average Power Consumption
Serial Data Rates
Serial Ports: 4800...115200 bps (default = 115200 bps)
2G-3G / GNSS Antennas
2)
Internal and external with automatic/manual switch
Sensor / Measurement range
3-axis Acceleration /Temperature
Normal operation: 50mA @ 12 VDC
Sleep mode: < 1mA @ 12 VDC
Environmental data
Operating temp.: -40 °C to +85 °C
Storage temp.: -40 °C to +85 °C
GSM: -40 °C to +85 °C
- 3DG: ± 8g (programmable)
- Temperature: - 50 to + 120 °C (programmable)
Processor core
RTC + Calendar
8 MB Flash (History / Firmware / Configuration)
3)
Battery charging temp.: 0 °C to +45 °C
1) Optional / Accessory
2) Activation with PFAL-Command.
3) Applicable with backup battery
4) Hardware Premium Features: CAN-Bus-interface, RS-485 port
Storage and using conditions of the device with battery option are limited to the battery temperature range.
FOX3-3G PROMOTION KIT
PROMOTION KIT for FOX3/-3G devices provides all the necessary hardware, software, and access data to the online documentation and FALCOM trace4you server to easily and quickly evaluate these products and all thier functionalities. This kit consists of:
1 - FOX3-3G unit, pre-configured
2 - PREMIUM-FEATURES (all activated)
3 - Control-Box
4 - Backup battery
5 - CA31 - Main port installation cable + UCOM
6 - CA69 - Accessory port cable + UCOM
7 - AC/DC Power adapter 12V-1A
8 - UK/US Plug travel adapter
9 - Instruction sheet
10 - Info-sheet with access data to online
documentation and FALCOM trace4you server
11 - Pre-paid SIM card. Service fee includes 10MB
of data transfer and 3 months access to the trace4you server for evaluation purposes
CONTACT
2
3G/ GPRS/EDGE
Network
FALCOM GmbH
Gewerbering 6
98704 Langewiesen
GERMANY
Mobile Unit (FOX3-3G) installed on a truck Falcom trace4you tracking software
Phone: +49 (0)3677 8042 0 (no support)
Fax : +49 (0)3677 8042 256 e-Mail: [email protected]
Internet: http://www.falcom.de/ trace4you Fleet
User Interface
Version: 1.0.3 Copyright © 2015, FALCOM GmbH
Specifcations and information given in this document are subject to change by FALCOM without notice. For latest product information visit: http://www.falcom.de http://www.falcom.de
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project