Tutorial online
1. Product Description
The Avantree Vox-pop is a new Bluetooth mono headset from the Avantree family. It delivers clear
transmission with voice prompts and high quality sound. With Multipoint Technology, your headset
seamlessly transforms into a powerful communication solution for up to two Bluetooth devices. The
Avantree Vox-pop is stylish and lightweight for all-day comfortable use.
2. Product Overview
1).
2).
3).
4).
5).
6).
7).
8).
Charging socket
Multi-function button (MFB)
Volume up button
Volume down button
LED indicator
Ear hook
Earphone
Main microphone
What’s in the box:
A. Avantree Vox-pop headset
B. USB charging cable
C. Ear hook
D. 2 silicone ear buds
E. User manual
3. Charging
User can charge the unit by using a Micro USB cable via a PC.
1). Before use, please charge the device for 3 hours to make sure the headset is fully charged and
the battery reaches its full capacity.
2). Afterwards, each charge cycle may take up to 2 hours.
3). LED will indicate red during charging and off when charging is complete.
4). If you have not used your Avantree Vox-pop for a few months, LED might not turn red when first
charging. It might take 15-35 minutes before the LED will come on.
5). We suggest fully charging the device at least once every two months.
NOTE: When the battery power is low, the LED flashes red and a voice prompt “Low Power” is given
every 15 seconds. Please recharge the battery as advised above.
4. Pairing / Connect (Tutorial online)
1). It is important to pair the headset with your Bluetooth device for first time use.
2). Pairing procedure:
A. Ensure the headset is off.
B. Press and hold the multi-function button for about 7 seconds until LED blinks blue and red
alternately, and you will hear “Paring”.
C. Search the device from your phone / PC.
D. Once the “Avantree Vox-pop’’ is found, follow the steps and enter pin code 0000 to pair if
needed, most phones don’t need this pin code.
E. Connect the headset to the device and you will here “Connected”.
F. Headset is ready for use now.
3). Once paired and connected, the headset will automatically connect to your phone whenever you
turn the headset on again, provided it is in range.
4). The headset will automatically switch itself off if disconnected for 10 minutes.
We found most problems are caused by improper pairing between the headset and the Bluetooth
device. Please follow the online tutorial step-by-step.
5. Basic Operations
5.1 Headset on/off
Turn on – Press and hold the MFB for 3 seconds until blue LED flashes 3 times and you will hear
“Power On”.
Turn off – Press and hold the MFB for 3 seconds until red LED flashes twice and you will hear
“Power Off”.
NOTE: Under standby mode, the LED indicator will flash blue every 3 seconds.
5.2 Answer a call – Press MFB briefly to answer the call.
5.3 Reject a call – Press and hold MFB for 3 seconds until you hear “Rejected”.
5.4 Re-dial – Briefly press the MFB button twice and you will hear “Redial”.
5.5 End a call – Briefly press the MFB once.
5.6 Transfer a call
1). Headset to phone: Press MFB button for 3 seconds until you hear a beep.
2). Phone to headset: Press MFB button for 3 seconds until you hear a beep.
5.7 Voice dialing
Please check if your mobile phone supports a voice dialing function.
If your phone does support this function, follow your mobile phone manual instructions to set it
up.
1). Press the MFB briefly, then you can hear a short beep.
2). Say the name of person you wish to call.
3). If the voice tags are paired to the related phone number stored in your mobile phone, the
number will be dialed.
5.8 Volume adjustment
Volume up: Quickly press “V+” to increase the volume.
Volume down: Quickly press “V-” to decrease the volume.
5.9 Mute & unmute
Mute: To mute the headset during a call, press and hold “V-” button for 3 seconds until you hear
a beep.
Unmute: To unmute the headset during a call, press and hold “V-” button for 3 seconds until you
hear a beep.
5.10 Answer a second call during a call
When receiving a second call, press the “V+” button for about 2 seconds. You will hear a beep to
answer the second call, and put the first caller on hold.
5.11 Switch between 2 phone calls
When having 2 calls on the line, press “V+” button for about 2 seconds. You will hear a beep to
switch between the 2 phone calls.
When having 2 calls on the line, quickly press the “MFB” button once to end the current call,
then press “V+” button for about 2 seconds again to talk with the other caller.
6. Advanced Operations – Multipoint (Tutorial online)
6.1 Pairing with two mobile phones
From OFF, press and hold the MFB button for 7 seconds until LED blinks blue and red
alternatively. Then pair it with the first phone.
Turn off the headset and the Bluetooth function of the first phone.
From OFF, press and hold the MFB button for 7 seconds until LED blinks blue and red
alternatively. Then pair it with the second phone.
Power off the headset again, and turn on the Bluetooth of the first phone.
Then turn on the headset again – it will automatically connect with last 2 paired phones.
6.2 Last number redialing
When the headset is connected with two Bluetooth mobile phones, quickly press MFB button
twice – the last dialed number on the second phone will be re-dialed.
NOTE: When connected to two Bluetooth mobile phones at the same time, when one phone is on a
call, the other phone keeps its connection with the headset.
7. Product Specification
* Bluetooth compliance: Bluetooth 3.0+EDR specifications
* Operating frequency band: 2.4GHz ~ 2.48GHz unlicensed ISM band
* Output power: Class 2 power output, up to 10 meters
* Support profiles: HSP and HFP profiles
* Integrated with echo cancellation.
* Built-in speaker and microphone.
* Standby time: up to 120 hours
* Talk time: up to 4-5 hours
* Battery charging time: about 2 hours
* Charger voltage: DC5.0V 300mA
* Battery type: 65 mAH (rechargeable Li-Polymer battery)
* Dimensions: 50mm x 23mm x 16mm
* Weight: 7.3g
The talk and standby times may vary when used with different mobile phones or other compatible
Bluetooth devices, usage settings, usage styles and environments.
8. Safety Information







To avoid damage or malfunction of this device, do not drop it from high places.
Keep this device away form humidity, water and other liquids. If the device is exposed to water,
moisture or other liquids, do not operate it to avoid the potential of electric shock, explosion or
damage to the device/injury to yourself.
Do not place or keep this device near any heat source, such as direct sunlight, radiators, stoves or
other apparatus which produces heat. It may cause an explosion or degrade the performance
and/or life of the battery.
Do not attempt to modify, repair or disassemble this device yourself (especially the battery). It may
cause an explosion. Attempting any repair or modification of this device yourself will void the
warranty.
Do not place heavy objects on this device.
Use only the correct charger as supplied with this device.
Replacement or service must be done by a qualified service center or by the manufacturer.
Unplug this device when unused for long periods, or during lightning storms.
CAUTION: ELECTRIC SHOCK HAZARD
The battery in this device may present a risk of fire or chemical burning if mistreated.
9. Declaration of Conformity
9.1. EU
This product is CE certified according to the provision of the R&TTE Directive (99/5/EC). We declare
that this product is in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
9.2. FCC Statement
1). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause
undesired operation.
2). Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
9.3. RF Warning Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure conditions without restriction. Changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
9.4. Trademark Statement
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
Avantree is a trademark owned by Avantronics Limited.
10. Warranty
Please refer to the warranty card included.
Technical Support & Product Tutorial
For more information about this product and other Avantree Bluetooth products, including video user
guides, product tutorials and online technical support, please visit the www.avantree.com ‘Product
Tutorial’ and ‘Download’ pages.
Due to the nature of our products, there may be software updates made without notice. Please
always refer to the Avantree website for the latest information.
QDID: B015071
FCC ID: WJ5-4GAH381
Z-PKMN-AH381V-0000
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement