Panasonic TXP50VT65B Quick start guide

Add to my manuals
28 Pages

advertisement

Panasonic TXP50VT65B Quick start guide | Manualzz

English

Model No.

TX-P50VT65B

TX-P55VT65B

TX-P65VT65B

Operating Instructions

Plasma Television

Contents

Be Sure to Read

Important Notice ·················································2

Safety Precautions ·············································3

Quick Start Guide

Accessories ························································6

Connections························································8

Identifying Controls ···········································14

First time Auto Setup ········································18

Using your VIERA

Operations ························································19

How to Use eHELP ···········································20

Viewing 3D images ···········································21

Others

FAQs·································································22

Maintenance ·····················································23

Specifications ···················································24

For more detailed instructions, refer to [eHELP]

(Built-in Operating Instructions).

How to use [eHELP] (p. 20)

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before operating this product and retain them for future reference.

The images shown in this manual are for illustrative purposes only.

TQB0E2312U-1

2

For the information of the trademarks, refer to [eHELP]

(Support > Licence).

Important Notice

Do not display any still part of the image for a long period

In such cases the still part of the image remains dimly on the plasma screen (“image retention”). This is not considered a malfunction and is not covered by the warranty.

Typical still image parts:

Channel number, channel logo and other logos

Still or moving pictures viewed in

4:3 or 14:9 aspect ratio

Video games

To avoid image retention, the screen saver may be activated (VIERA logo moves) or the on-screen message may move after a few minutes if no signals are sent or no operations are performed.

Notice for DVB / Data broadcasting /

IPTV functions

This TV is designed to meet the standards (as of

August, 2012) of digital services.

Not all the features are available depending on the country, area, broadcaster, service provider and network environment.

● The compatibility with future services is not guaranteed.

● Check the latest information on the available services at the following website.

http://panasonic.net/viera/support

Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaim any liability or damage arising from operation and/or performance from usage of such other maker’s peripheral devices.

“Full HD 3D Glasses™” Logo indicates compatibility between TV products and 3D Eyewear which are compliant with the “Full HD 3D Glasses™” format, and does not indicate picture quality of TV products.

The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content.

Panasonic has no authority to and does not grant you that permission and explicitly disclaims any right, ability or intention to obtain such permission on your behalf. It is your responsibility to ensure that your use of this or any other device complies with applicable copyright legislation in your country. Please refer to that legislation for more information on the relevant laws and regulations involved or contact the owner of the rights in the content you wish to record or playback.

This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the

AVC Standard (“AVC Video”) and/or (ii) decode AVC

Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide

AVC Video. No license is granted or shall be implied for any other use.

Additional information may be obtained from MPEG

LA, LLC.

See http://www.mpegla.com.

Rovi Corporation and/or its subsidiaries and related affiliates are not in any way liable for the accuracy or availability of the program schedule information or other data in the Rovi Guide system and cannot guarantee service availability in your area. In no event shall Rovi Corporation and/or its related affiliates be liable for any damages in connection with the accuracy or availability of the program schedule information or other data in the Rovi Guide system.

Safety Precautions

To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings and cautions below:

Mains plug and lead

Warning

If you detect anything unusual, immediately switch off the mains supply switch and remove the mains plug.

● This TV is designed to operate on AC 220-240 V, 50 /

60 Hz.

● Insert the mains plug fully into the socket outlet.

● Ensure that the mains plug is easily accessible.

● Disconnect the mains plug when cleaning the TV.

Do not touch the mains plug with wet hands.

● Do not damage the mains lead.

Do not place a heavy object on the lead.

Do not place the lead near a high temperature object.

Do not pull on the lead. Hold onto the mains plug body when disconnecting the plug.

Do not move the TV with the lead plugged into a socket outlet.

Do not twist the lead, bend it excessively or stretch it.

Do not use a damaged mains plug or socket outlet.

Ensure the TV does not crush the mains lead.

Do not use any mains lead other than that provided with this TV.

Ensure the earth pin on the mains plug is securely connected to prevent electrical shock.

An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earth connection.

IMPORTANT:

THE MOULDED MAINS PLUG

FOR YOUR SAFETY, PLEASE READ THE

FOLLOWING TEXT CAREFULLY.

This TV is supplied with a moulded 3-pin mains plug for your safety and convenience.

A 10 amp fuse is fitted in this mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a 10 amp rating and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark the fuse body.

or the BSI mark

If the mains plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is

on replaced.

If you lose the fuse cover, the mains plug must not be used until a replacement cover is obtained.

A replacement fuse cover may be purchased from your local dealer.

Do not cut off the mains plug.

Do not use any other type of mains lead except the one supplied with this TV. The supplied mains lead and moulded plug are designed to be used with this

TV to avoid interference and for your safety.

If the socket outlet in your home is not suitable, get it changed by a qualified electrician.

If the plug or mains lead becomes damaged, purchase a replacement from an authorised dealer.

WARNING: THIS TV MUST BE EARTHED.

How to replace the fuse:

Pull out the fuse cover with a screwdriver and replace the fuse.

Take care

Warning

● Do not remove covers and never modify the TV yourself as live parts are accessible when they are removed. There are no user serviceable parts inside.

● Do not expose the TV to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV.

Do not insert foreign objects into the TV through the air vents.

3

4

Do not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic dealer to perform the setup or installation of approved wallhanging brackets.

● Do not apply strong force or impact to the display panel.

Do not place the TV on sloped or unstable surfaces, and ensure that the TV does not hang over the edge of the base.

● Do not expose the TV to direct sunlight and other sources of heat.

To prevent the spread of fire, keep candles or other open flames away from this product at all times

Dangerous part / Small object

Warning

This product contains possibly dangerous parts such as plastic bags, that can be breathed in or swallowed by young children accidentally. Keep these parts out of reach of young children.

Do not allow children to handle any small objects such as SD

Card. The small object could be swallowed by young children.

Remove SD Card immediately after use and store out of reach of young children.

● 3D Eyewear and Electronic Touch Pen contain small parts that can be swallowed by young children accidentally. Keep these parts out of reach of young children.

Pedestal

Warning

● Do not disassemble or modify the pedestal.

Caution

Do not use any pedestal other than the one provided with this TV.

Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest

Panasonic dealer immediately.

During setup, make sure that all screws are securely tightened.

Ensure that the TV does not suffer any impact during installation of the pedestal.

Ensure that children do not climb onto the pedestal.

Install or remove the TV from the pedestal with at least two people.

Install or remove the TV by the specified procedure.

Radio wave

Warning

● Do not use the TV, 3D Eyewear, Electronic Touch

Pen and VIERA Touch Pad Controller in any medical institutions or locations with medical equipment. Radio waves may interfere with the medical equipment and cause accidents due to the malfunction.

● Do not use the TV, 3D Eyewear, Electronic Touch Pen and VIERA Touch Pad Controller near any automatic control equipment such as automatic doors or fire alarms. Radio waves may interfere with the automatic control equipment and cause accidents due to the malfunction.

Keep the distance at least 22 cm from the TV, 3D

Eyewear, Electronic Touch Pen and VIERA Touch

Pad Controller when you have a cardiac pacemaker.

Radio waves may interfere with the operation of the pacemaker.

Do not disassemble or alter the TV, 3D Eyewear,

Electronic Touch Pen and VIERA Touch Pad Controller in any way.

Built-in wireless LAN

Caution

● Do not use the built-in wireless LAN to connect to any wireless network (SSID*) for which you do not have usage rights. Such networks may be listed as a result of searches. However, using them may be regarded as illegal access.

*SSID is a name for identifying a particular wireless network for transmission.

● Do not subject the built-in wireless LAN to high temperatures, direct sunlight or moisture.

● Data transmitted and received over radio waves may be intercepted and monitored.

● The built-in wireless LAN uses 2.4 GHz and 5 GHz frequency bands. To avoid malfunctions or slow response caused by radio wave interference, keep the

TV away from the devices such as other wireless LAN devices, microwaves, mobile phones and the devices that use 2.4 GHz and 5 GHz signals when using the built-in wireless LAN.

When noises occur due to the static electricity, etc., the TV might stop operating for the protection of the devices. In this case, turn the TV off with Mains power

On / Off switch, then turn it on again.

Additional information for the wireless LAN and access point may be on the following website.

http://panasonic.net/viera/support

Bluetooth

®

wireless technology

Caution

● The TV, 3D Eyewear, Electronic Touch Pen and VIERA

Touch Pad Controller use the 2.4 GHz radio frequency

ISM band (Bluetooth

®

). To avoid malfunctions or slow response caused by radio wave interference, keep the TV, 3D Eyewear, Electronic Touch Pen and VIERA

Touch Pad Controller away from the devices such as other wireless LAN devices, other Bluetooth devices, microwaves, mobile phones and the devices that use

2.4 GHz signal.

Ventilation

Caution

Allow sufficient space around the TV in order to help prevent excessive heat, which could lead to early failure of some electronic components.

Minimum distance:

10

10

10 7

(cm)

● Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths and curtains.

Whether you are using a pedestal or not, always ensure the vents at the bottom of the TV are not blocked and there is sufficient space to enable adequate ventilation.

Moving the TV

Caution

Before moving the TV, disconnect all cables.

● The TV is heavy. Move the

TV with at least two people.

Support as shown to avoid injury by the TV tipping or falling.

Transport only in upright position. Transporting the TV with its display panel facing upwards or downwards may cause damage to the internal circuitry.

When not in use for a long time

Caution

This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live socket outlet.

● Remove the mains plug from the wall socket when the

TV is not in use for a prolonged period of time.

Excessive volume

Caution

● Do not expose your ears to excessive volume from the headphones. Irreversible damage can be caused.

If you hear a drumming noise in your ears, turn down the volume or temporarily stop using the headphones.

Battery for the Remote Control /

3D Eyewear / Electronic Touch Pen / VIERA

Touch Pad Controller

Caution

● Incorrect installation may cause battery leakage, corrosion and explosion.

● Replace only with the same or equivalent type.

● Do not mix old and new batteries.

Do not mix different battery types (such as alkaline and manganese batteries).

Do not use rechargeable batteries (Ni-Cd, etc.).

Do not burn or break up batteries.

Do not expose batteries to excessive heat such as sunshine, fire or the like.

Make sure you dispose of batteries correctly.

Remove the battery from the unit when not using for a prolonged period of time to prevent battery leakage, corrosion and explosion.

Electronic Touch Pen Use

Warning

The TV may be hot. Do not touch it continuously to prevent low temperature burn.

Caution

● Do not forcibly hit or pick the TV screen with the

Electronic Touch Pen to prevent the TV from falling over.

● Touch the TV screen only with the tip of the Electronic

Touch Pen, do not move the tip with exerting pressure on, or do not move the tip fast to prevent the scratch of the screen.

Stop using the Electronic Touch Pen immediately if you experience any redness, pain or skin irritation. In rare cases, the materials used in the Electronic Touch Pen may cause an allergic reaction.

Use the Electronic Touch Pen taking a break sometimes. Guideline for continuous use is around

1 hour to protect against eyestrain or physical deconditioning.

Do not use the Electronic Touch Pen at high temperatures. Always keep the Electronic Touch Pen in a cool and dry place.

3D Eyewear Use

Caution

Use the 3D Eyewear only for the intended purpose and nothing else.

● Do not move around while wearing the 3D Eyewear to avoid falling or accidental injury.

● Do not drop, bend, exert pressure on, or step on the 3D

Eyewear.

● Be careful of the tips of the frame when putting on the

3D Eyewear.

● Be careful not to trap your fingers in the hinge section of the 3D Eyewear.

● Do not use the 3D Eyewear if it is physically damaged.

● If you suffer from any eyesight problems (short / farsighted, astigmatism, eyesight differences in left and right), ensure that you correct your vision before using the 3D Eyewear. The supplied 3D Eyewear can be worn over vision correction glasses.

Stop using the 3D Eyewear immediately if you experience any redness, pain or skin irritation around the nose or temples. In rare cases, the materials used in the 3D Eyewear may cause an allergic reaction.

● Do not use the 3D Eyewear at high temperatures.

Always keep the 3D Eyewear in a cool and dry place.

● Stop using the 3D Eyewear immediately if a malfunction or fault occurs.

5

Viewing 3D Images

Caution

● Pay special attention when children are viewing 3D images. 3D images should not be viewed by children younger than about 6 years old, as a guideline.

All children must be fully supervised by parents or guardians who must ensure their safety and health while they are viewing 3D images.

Stop viewing 3D images immediately if you feel tired, feel unwell, experience any other uncomfortable sensation or clearly see double images. Take an appropriate break before continuing to view. When you set the 3D effect by using [3D Adjustment], take into account that the vision of 3D images varies among different individuals.

● Do not view 3D images if you have a history of oversensitivity to light, heart problems or any other medical conditions.

● When viewing 3D images, your sense of distance may be tricked or go wrong. Be careful not to hit the TV screen or other people unintentionally. Ensure there are no breakable objects around you to avoid any accidental damage or injury.

● Do not view 3D images from a distance shorter than recommended. The recommended viewing distance is at least 3 times of the image height.

50-inch model

: 1.9 m or more

55-inch model

: 2.1 m or more

65-inch model

: 2.4 m or more

When black bands at the top and bottom of the screen are displayed, such as movies, view the screen from a distance at least 3 times the height of the actual image. (That makes the distance shorter than the recommended values above.)

6

Accessories

Remote Control

(p. 14)

● N2QAYB000863

VIERA Touch Pad

Controller

(p. 15)

● N2QBYB000026

Batteries (4)

● R6

(p. 14, 15)

Pedestal

(p. 7)

Mains lead

(p. 9)

3D Eyewear (2)

(p. 21)

AV1 (SCART) adaptor

(p. 9, 10)

AV2 (COMPONENT /

VIDEO) adaptor

(p. 11)

Ferrite core for

LAN cable (2)

(Large size)

(p. 10)

Electronic Touch Pen

(with R03 battery)

(p. 16)

Cable tie

(p. 13)

Ferrite core for headphones

(Small size)

(p. 12)

Use the Ferrite cores to comply with the EMC standard.

Operating Instructions

Production Registration Leaflet

● Accessories may not be placed all together. Take care not to throw them away unintentionally.

● For the information of optional accessories, refer to [eHELP] (Support > Optional accessories).

Assembling / Removing the pedestal

Assembly screw

(4)

50-inch model

(8)

55-inch model

65-inch model

M5 × 16

Assembly screw

(5)

50-inch model

(1)

55-inch model

65-inch model

M4 × 10

Bracket

50-inch model 55-inch model

65-inch model

Base

50-inch model 55-inch model

65-inch model

Cover

50-inch model 55-inch model

65-inch model

Cable clamp (4)

(p. 13)

Assembling the pedestal

50-inch model

B

E

A

C

3

2

55-inch model

65-inch model

A

C

B

E

3

2

1

1

D

D

4

B

5

4

A

5

7

8

Adjusting the panel to your desired angle

Do not place any objects within the full rotation range.

50-inch model

15°

15°

(View from the top)

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

1 Remove the assembly screws

50-inch model

/

55-inch model 65-inch model

from the TV.

2 Pull out the pedestal from the TV.

3 Remove the assembly screw from the cover.

4 Pull out the cover.

5 Remove the assembly screws from the bracket.

Connections

● External equipment and cables shown are not supplied with this TV.

● Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.

● Check the type of terminals and cable plugs are correct when connecting.

● Always use a fully wired SCART or HDMI cable.

● Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.

Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.

Also read the manual of the equipment being connected.

Terminals

1

2

3

4

5

6

1

CI slot (p. 12)

2

SD Card slot

3 Headphone jack (p. 12)

4 USB 1 - 3 port

5 HDMI1 - 3 (p. 10, 11)

6 DIGITAL AUDIO

7 AV2 (COMPONENT / VIDEO)

(p. 11)

8 AV1 (SCART) (p. 9, 10)

9 SERVICE PORT

This terminal is for special applications used by authorised service dealers.

10

Terrestrial terminal

(p. 9)

11 Satellite terminal (p. 9)

12 ETHERNET (p. 10)

12 11 10 9 8 7

Basic connections

Mains lead, satellite dish and aerial

● To ensure your satellite dish or aerial is correctly installed, please consult your local dealer. Also please consult the received broadcasting companies for details.

freesat, Other Sat. / Satellite

Satellite dish

Mains lead

(supplied)

DVB, Analogue

Satellite cable

Terrestrial aerial

AC 220-240 V

50 / 60 Hz

AV devices

DVD Recorder / VCR

TV

Mains lead

Push until both side tabs click

RF cable

Make sure that the mains lead is securely fixed.

To remove from the TV:

tabs

Press both tabs and pull on mains connector to release

Terrestrial aerial

SCART cable

DVD Recorder / VCR

AV1 (SCART) adaptor (supplied)

RF cable

RF cable

9

10

DVD Recorder / VCR and Cable

TV

Cable TV box

Cable

HDMI cable

Terrestrial aerial

SCART cable

SCART cable

RF

Cable

AV1 (SCART) adaptor (supplied)

RF Cable

RF cable

DVD Recorder / VCR

Network

To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network environment. If you do not have any broadband network services, please consult your retailer for assistance.

Prepare the internet environment for wired connection or wireless connection.

Setup of the network connection will start when first using the TV. (p. 18)

Wired connection

TV

LAN cable (Unshielded)

● Use the Unshielded Twist Pair (UTP) LAN cable.

*Less than 10 cm

Internet environment

Ferrite core - Large size (supplied)

Installing the Ferrite core

Close Pull back the tabs

(in two places)

Wireless connection

Access point

Wind the cable twice

Internet environment

Built-in wireless LAN

Other connections

DVD player

(COMPONENT equipment)

TV

(Listening)

DVD Player

AV2 (COMPONENT / VIDEO) adaptor

(supplied)

Camcorder / Game equipment

(VIDEO equipment)

TV

(Viewing)

(Listening)

(Viewing)

AV2 (COMPONENT / VIDEO) adaptor

(supplied)

Amplifier (to listen with speakers)

TV

Camcorder

Game equipment

HDMI cable

Amplifier with speaker system

External equipment

(DVD Player, etc.)

● Use HDMI2 for connecting an amplifier. This connection is applicable when using an amplifier that has ARC (Audio

Return Channel) function.

As for an amplifier without ARC function, use DIGITAL AUDIO.

To enjoy the sound from the external equipment in multi-channel sound (e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier. For the connections, read the manuals of the equipment and amplifier.

11

Headphones

TV

Less than

10 cm

(M3 stereo mini plug)

Ferrite core - Small size (supplied)

Installing the Ferrite core

To adjust volume

[Headphone Volume] in the

Sound Menu

Pull back the tabs

(in two places)

Wind the cable twice Close

Common Interface

TV

CI module

If a view card and a card reader come as a set, first insert the card reader, then insert the view card into the card reader.

Insert the module in the correct direction.

Types of connectable equipment to each terminal

Features

AV2*

1

Terminal

AV1*

1

COMPONENT VIDEO

12

To record / play back videocassettes / DVDs

(VCR / DVD Recorder)

To watch 3D contents (Blu-ray Disc Player)

To watch cable broadcasts (Cable TV box)

To watch DVDs (DVD Player)

To watch camcorder images (Video camera)

To play games (Game equipment)

To use amplifier with speaker system

To use network services

USB HDD Recording

VIERA Link

*

2

* 3

: Recommended Connection

*1: To connect the equipment, the terminal adaptor (supplied) is necessary.

*2: Use HDMI2 for connecting an amplifier. This connection is applicable when using an amplifier that has ARC (Audio

Return Channel) function.

*3: Use USB 3 port for connecting the USB HDD.

Using the cable tie and cable clamp

(supplied)

● Do not bundle the Satellite cable, RF cable and mains lead together (could cause distorted image).

● Fix cables with the cable tie and cable clamp as necessary.

When using the optional accessory, follow the option’s assembly manual to fix cables.

Attach the cable tie Bundle the cables

hole

Attach the cable clamp

Insert the cable clamp in a hole

Insert the cable tie in a hole

To remove from the TV:

snaps

Keep pushing both side snaps

Bundle the cables To release:

hole

Set

Tab

Keep pushing the tab

hooks

To loosen:

Set the tip in the hooks

knob

Keep pushing the knob

To remove from the TV:

snaps

Keep pushing both side snaps

13

Identifying Controls

Remote Control

14

5

6

9

10

7

8

11

1

2

3

4

12

13

Hook

21

22

23

14

15

16

17

18

19

20

24

25

1 Standby On / Off switch

2 3D button

● Switches the view between 2D and 3D.

3 [Main Menu]

Press to access Picture, Sound, Network, Timer,

Setup and Help Menus.

4

Information

Displays channel and programme information.

5

APPS

Displays [APPS List] (applications list).

Installing / Removing batteries

Pull open

6 OK

● Confirms selections and choices.

● Press after selecting channel positions to quickly change channel.

7 [Option Menu]

● Easy optional setting for viewing, sound, etc.

8 Coloured buttons

(red-green-yellow-blue)

Used for the selection, navigation and operation of various functions.

9

Sound Mute On / Off

10 Text service button

11 Volume Up / Down

12 Numeric buttons

● Changes channel and teletext pages.

● Sets characters.

● When in Standby mode, switches TV on.

13 [eHELP]

● Displays [eHELP] (Built-in Operating Instructions).

14 Light

● Lights the buttons for about 5 seconds (except the buttons “25”).

15

Input mode selection

TV - switches to freesat / DVB / Analogue / Other

Sat. / Satellite mode.

AV - switches to AV input mode from Input

Selection list.

16 Exit

Returns to [Home Screen].

17 HOME

● Displays [Home Screen].

18 TV Guide

● Displays Electronic Programme Guide.

19 Cursor buttons

● Makes selections and adjustments.

20 Return

● Returns to the previous menu / page.

21 Aspect

● Changes aspect ratio.

22 Subtitles

Displays subtitles.

23

Channel Up / Down

24

Last view

Switches to previously viewed channel or input mode.

25 Operations for contents, connected equipment, etc.

Note the correct polarity

(+ or -)

Close

VIERA Touch Pad Controller

This touch pad controller is designed for the convenient operations, especially, on Home Screen or internet contents.

You can operate the TV intuitively with this controller.

● The touch pad controller can be used by registering to this TV with Bluetooth wireless technology. Setup screen to register will appear in “First time Auto Setup” for first using the TV. (p. 18)

● After registering, you can operate the TV without pointing this controller at the TV (except Standby On / Off switch).

To use Standby On / Off switch, point the controller directly at the TV's remote control signal receiver because it works with the infrared. (You can operate the switch without registration.)

It is recommended to speak within about 15 cm from microphone of VIERA Touch Pad Controller when using Voice

Control function.

1

2

3

4

5

6

7

8

9

10

11

12

1 Standby On / Off switch

● Same function of the remote control button 1 (p. 14).

2 Microphone

3 Microphone button

4 Touch pad (see below)

5

[Option Menu]

6

HOME

Same function of the remote control button 17 (p. 14).

7 Volume Up / Down

Same function of the remote control button 11 (p. 14).

8 APPS

● Same function of the remote control button 5 (p. 14).

9 On-screen remote control

● Press to display the remote control GUI (Graphical User

Interface). Press again to move the position of GUI. (To change the page of GUI, slide your finger to the left / right on the touch pad.)

10 Return

● Same function of the remote control button 20 (p. 14).

11 Channel Up / Down

Same function of the remote control button 23 (p. 14).

12

OK

Touch Pad

● Tap the centre of the pad for “OK”.

Installing / Removing batteries

● Slide your finger to move the cursor

(on internet contents or [Cursor

Settings] in [VIERA Touch Pad

Controller] (Setup Menu)), select the item, adjust levels, etc.

● Trace the fringe to scroll.

Slide open

Close

Note the correct polarity

(+ or -)

Note

● It is recommended to hold the touch pad controller with your hand when using.

● The battery power will be used whenever you use the touch pad controller (including the touch of the touch pad) even if not operating the TV. It may decrease the battery life.

● Some operations differ depending on the application.

15

16

Electronic Touch Pen

You can paint or play games on the TV screen with the Electronic Touch Pen.

● The Electronic Touch Pen can be used by pairing to the TV in “First time Auto Setup” (p. 18) or [Touch Pen Setup].

For more information, refer to [eHELP] (Functions > Electronic Touch Pen > Touch Pen Setup).

2

1

3

4

1 Power button

To turn on: Press once

To turn off: Press and hold 2 seconds or longer

● Automatically turned off if unused for 5 minutes.

2 Indicator lamp

● Lights for approx. 2 seconds when turned on, and then blinks at approx. 2-second intervals.

● Up to 2 pieces of the Electronic Touch Pen (Pen1 /

Pen2) can be used simultaneously.

Indicator blinks:

Pen1: Red

Pen2: Green

Also lights or blinks when pairing the Electronic

Touch Pen to the TV.

Blinks 5 times consecutively at power-on when the battery level is low.

3 Unit cover

4 Pen tip

Press the pen tip on this side of the Electronic Touch

Pen against the TV screen for use.

Inserting the battery

1

Turn and slide the unit cover until the entire shape of the battery is visible.

2

Insert the R03 battery, and then slide and turn the unit cover to close until it clicks.

How to hold the Electronic Touch Pen

● Touch the tip of the Electronic Touch Pen vertically onto the TV screen and press it lightly.

Note

● Do not use devices such as mobile phones or personal transceivers that emit strong electromagnetic waves near the

Electronic Touch Pen as this may cause the Electronic Touch Pen to malfunction.

Use the Electronic Touch Pen where there is no interference from other Bluetooth devices.

For more information, refer to [eHELP] (Functions > Electronic Touch Pen).

Indicator / Control panel

● When pressing 1, 2, 3 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight the pressed button.

1

23 mm

2

3

4

Rear side of the TV

5 6 7

8 9

1 Input mode selection

● Press repeatedly until you reach the desired mode.

[Main Menu]

● Press and hold for about 3 seconds to display main menu.

OK (when in the menu system)

2

Channel Up / Down

Cursor Up / Down (when in the menu system)

3

Volume Up / Down

Cursor Left / Right (when in the menu system)

4

Mains power On / Off switch

Use to switch the mains power.

5 Remote control signal receiver

Do not place any objects between the TV remote control signal receiver and remote control.

6 Ambient sensor

● Senses brightness to adjust picture quality when

[Ambient Sensor] in the Picture Menu is set to

[On].

7 Power LED

Red: Standby

Green: On

Orange: Standby with Recording

Standby with Timer Programming On

● The LED blinks when the TV receives a command from the remote control.

8 Built-in Camera

Automatically pops up when the camera operation is activated.

Close manually by pushing top of the camera.

For the information of the camera operation, refer to [eHELP] (Functions > Built-in Camera).

9 Lens part

Tilt: -17° to +17°

Using the On Screen Displays

- Operation guide

Many features available on this TV can be accessed via the On Screen Display menu.

Operation guide

How to use remote control

Operation guide will help your operation by using the remote control.

Example: [Sound Menu]

Main Menu

Picture

Sound

Network

Timer

Setup

Mode

Bass

Treble

Equaliser

Balance

Surround

Bass Boost

Digital Remaster

Headphone Volume

Auto Gain Control

Standard

Off

Off

Off

Off

1/2

0

0

0

11

Open the main menu

Move the cursor / select from a range of options / select the menu item (up and down only) / adjust levels (left and right only)

Access the menu / store settings after adjustments have been made or options have been set

Return to the previous menu

Help

Exit the menu system and return to [Home Screen]

Operation guide

17

18

First time Auto Setup

Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time.

These steps are not necessary if the setup has been completed by your local dealer.

● Please complete connections (p. 8 - 13) and settings (if necessary) of the connected equipment before starting Auto

Setup. For details of settings for the connected equipment, read the manual of the equipment.

1

Plug the TV into mains socket and turn power on

● Takes a few seconds to be displayed.

2

Select the following items

Set up each item by following the on-screen instructions.

Select [Home]

Select [Home] viewing environment to use in your home environment.

● [Shop] is for shop display.

● To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.

Set up the network connection

Select your country

Auto Setup screen varies depending on the country and the signal mode.

[Satellite Antenna Setup]

Ensure the satellite connections are completed (p. 9) and select the tuner mode ([Dual Tuner] / [Single Tuner]).

Select your region

Register the VIERA Touch Pad Controller to this TV

Select [Pairing] and follow the on-screen instructions to use the touch pad controller (supplied).

Register the Electronic Touch Pen to this TV

Select [Pairing] and follow the on-screen instructions to use the Electronic Touch Pen (supplied).

3

Select the type of [Home Screen]

The demonstration to explain how to use [my Home Screen] is displayed. Confirm the demonstration by following the on-screen instructions, and then select the desired [Home Screen].

Example: [Home Screen Selection] Example: [TV Home Screen]

● [my Home Screen] is the start-up screen when the TV is turned on or the HOME button is pressed.

Auto Setup is now complete and your TV is ready for viewing.

If tuning has failed, check the connection of the network, Satellite cable, RF cable, and then follow the on-screen instructions.

Note

The TV will automatically go into Standby mode when no operation is performed for 4 hours if [Auto Standby] in the

Timer Menu is set to [On].

● The TV will automatically go into Standby mode when no signal is received and no operation is performed for

10 minutes if [No signal Power off] in the Timer Menu is set to [On].

● To retune all channels [Auto Setup] in [Tuning Menu] (Setup Menu)

● To initialise all settings [Shipping Condition] in [System Menu] (Setup Menu)

Operations

Turn power on

(TV)

or

● Mains power On / Off switch should be on. (p. 17)

(Remote Control)

The last viewed [Home Screen] is displayed.

Example: [TV Home Screen] Example: Selected content screen

To return to [Home Screen] at any time

You can set up or make [Home Screen] to display desired information, to access specific features easily, to select the default [Home Screen], etc. For details, follow the on-screen instructions or refer to [eHELP] (Watching > my Home

Screen).

Watching TV

1

Select the TV viewer from [Home Screen]

select

access

2

Select the mode

● Selectable modes vary depending on the tuned channels.

select

TV Selection

freesat

DVB

Analogue

Other Sat.

Satellite

access

● You can also select the mode by pressing the TV button repeatedly.

● If [TV Selection] menu is not displayed, press the TV button to switch the mode.

3

Select a channel

up

or

down

● To select 2 or more-digit channel position number, e.g. 399

To access each feature

Access [APPS List] and select a feature

Example: [APPS List]

● APPS is the applications (features) of the TV.

● For operations of each feature and the setup of [APPS List], follow the on-screen instructions or refer to [eHELP] (Functions > APPS

List).

19

20

How to Use eHELP

[eHELP] is the detailed operating instructions built into the TV, and helps you to get more understanding of the operations for each feature.

1

Display [eHELP]

or

[Help]

[eHELP]

[Read first] will be displayed on the top page. Please read these instructions fully to get more understanding of the operation in [eHELP].

● If this is not the first time to view [eHELP] from when the TV is turned on, the confirmation screen is displayed to select whether [First Page] or [Last Page].

2

Select the category and item

Category field

Item field

Sub item field

Description

select category

access

To return to the previous field

select item

access

● To scroll the description (if more than 1 page)

While the description is highlighted

● To display the menu related to the description (only for some descriptions)

(red)

select sub item

access

Viewing 3D images

You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D

Eyewear. “Accessories” (p. 6)

● The 3D Eyewear must be worn to view 3D images.

● This TV supports [Frame Sequential]*, [Side by Side] and [Top and Bottom] 3D formats.

*: The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately played back.

3D Eyewear

Use the supplied 3D Eyewear or Panasonic 3D Eyewear that has this logo and supports Bluetooth

®

wireless technology.

“Full HD 3D Glasses™” logo indicates products that are compatible with the active shutter 3D glasses technology standards licensed by the Full HD 3D Glasses Initiative. The RF mark on the logo means the wireless system (Bluetooth

®

wireless technology), and you can use the 3D

Eyewear and the TV that have the same mark together.

Note

Do not exert pressure on or scratch the lens of the 3D Eyewear.

● Do not use devices such as mobile phones or personal transceivers that emit strong electromagnetic waves near the

3D Eyewear as this may cause the 3D Eyewear to malfunction.

● Do not wear the 3D Eyewear when watching anything other than 3D images. Liquid crystal displays (such as computer screens, digital clocks or calculators, etc.) may be difficult to see while wearing the 3D Eyewear.

First registration

Perform the first registration when first using the 3D Eyewear with this TV.

1

Turn the TV on

2

Press Power button for about 1 second to turn the 3D Eyewear on

The lamp lights for about 2 seconds and then flashes.

The 3D Eyewear will be turned on and start registration.

Place the 3D Eyewear within 50 cm from the TV while registration in progress.

3

After the registration is successfully completed, the 3D Eyewear will reconnect with TV automatically when the 3D Eyewear is turned on near the TV in 3D mode

Registration again

When connection with the registered TV fails, or when using with another TV, re-register the 3D Eyewear.

1 Turn the TV on

2 Within 50 cm from the TV, press Power button until lamp lights, then release it to start registration

3 After the registration is successfully completed, the 3D Eyewear will reconnect with TV automatically when the 3D

Eyewear is turned on near the TV in 3D mode

To view the 3D images

Playing back 3D-compatible Blu-ray disc (Frame Sequential format)

● Connect the 3D-compatible player via a fully wired HDMI compliant cable. (If you use the non 3D-compatible player, the images will be displayed in 2D mode.)

● If the input mode is not switched automatically, select the input mode connected to the player using the AV button.

3D-supported broadcast

Please consult the suppliers of contents or programmes for availability of this service.

3D photos and 3D videos taken by 3D-compatible Panasonic products

● Available in Media Player and Network services.

2D images converted to 3D

● Press the 3D button and set to [2D 3D] mode in [3D Mode Selection].

Preparations

Ensure that the registration of the 3D Eyewear has been completed.

21

22

1

Turn the 3D Eyewear on and put it on

Connection status and battery status are displayed on the bottom right of the screen.

2

View the 3D images

Safety precautions will be displayed when you first watch the 3D image. Select [Yes] or [No] to continue to view

3D images.

Note

Turn off the 3D Eyewear after using it.

Use the 3D Eyewear within approximately 3.2 m from the TV. You cannot view the 3D images with the 3D Eyewear too far from the TV, because of the difficulty of receiving radio waves from the TV.

The range may be shortened depending on the obstacles between the TV and the 3D Eyewear, or the surrounding environment.

Use the 3D Eyewear where there is no interference from other Bluetooth devices.

● 3D content will not be correctly visible if the 3D Eyewear is worn upside down or back-to-front.

● When viewing 3D images, make sure your eyes are at an approximately horizontal level and keep a position where you do not see double images.

● If light appears to flicker under fluorescents or dimmers when using the 3D Eyewear, change the setting of [3D

Refresh Rate] in [3D Settings] (Picture Menu).

● There are differences in the viewing range of the 3D Eyewear among individuals.

FAQs

Before requesting service or assistance, please follow these simple guides to solve the problem.

For more information, refer to [eHELP] (Support > FAQs).

The TV does not switch on

● Check the mains lead is plugged into the TV and the socket outlet.

● The fuse in the mains plug may have blown. Replace it with one of an identical rating. (p. 3)

The TV goes into Standby mode

Auto power standby function is activated.

The remote control does not work or is intermittent

● Are the batteries installed correctly? (p. 14)

● Has the TV been switched on?

● The batteries may be running low. Replace them with new ones.

● Point the remote control directly at the TV’s remote control signal receiver (within about 7 m and a 30 degree angle of the signal receiver).

Situate the TV away from sunshine or other sources of bright light not to shine on the TV’s remote control signal receiver.

Electronic Touch Pen does not work

● Check that the batteries are fresh, are of the same type and are installed with the correct polarity (+ & -).

● Check if the pairing range is within 50 cm.

● The Electronic Touch Pen automatically turns off if pairing cannot be performed within 2 minutes. In this case, pair again.

● The Electronic Touch Pen automatically turns off if unused for 5 minutes.

(When the Electronic Touch Pen is turned on, the indicator lamp blinks but turns off in several minutes.) Turn the power on again.

No image can be displayed

● Check the TV is turned on.

● Check the mains lead is plugged into the TV and the socket outlet.

● Check the correct input mode is selected.

● Check the setting of [AV2] ([COMPONENT] / [VIDEO]) in [Input Selection] to match the output of the external equipment.

● Is [Contrast], [Brightness] or [Colour] in the Picture Menu set to the minimum?

Check all required cables and connections are firmly in place.

Unusual image is displayed

● Turn the TV off with Mains power On / Off switch, then turn it on again.

● If the problem persists, initialise all settings. [Shipping Condition] in [System Menu] (Setup Menu)

Unusual sound from the TV

When the power is on, whirring sound of cooling fan or drive noise may be heard from inside the TV (not a sign of faulty operation).

Parts of the TV become hot

● Even if the temperature of parts of the front, top and rear panels has risen, these temperature rises do not cause any problems in terms of performance or quality.

Check you can get Freeview HD in your area. Text your postcode, followed by your house number or name to 80560*. Or visit freeview.co.uk

*e.g. NW96NY1 (Costs no more than a normal text.)

To get the most up to date service from Freeview it is important for Freeview customers to retune from time to time.

How do I re-tune my Freeview TV ?

This is a quick reference. If you have any problems, check the Operating Instructions or ask a friend or family member to show you how. Alternatively, go to your local electrical retailer, contact your local Panasonic dealer or visit freeview.co.uk/retune

Re-tuning only takes a few minutes, just follow the steps below:

1. Press the TV button to select DVB mode.

2. Press the MENU button to open the main menu.

3. [Setup] [DVB Tuning Menu] [Auto Setup]

Please note: most digital TV recorders will keep your original recordings after running a re-tune but you will need to reset any future recordings.

Maintenance

First, remove the mains plug from the socket outlet.

Display panel, Cabinet, Pedestal

Regular care:

Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints.

For stubborn dirt:

First clean the dust on the surface. Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Wring the cloth and wipe the surface. Finally, wipe away all the moisture.

Caution

Do not use a hard cloth or rub the surface too hard, otherwise this may cause scratches on the surface.

Take care not to subject the TV’s surfaces to water or detergent. Liquid inside the TV could lead to product failure.

Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may degrade surface quality or cause peeling of the paint.

● The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the surface with your fingernail or other hard objects.

● Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may degrade surface quality.

Mains plug

Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may cause fire or electrical shock.

23

24

Specifications

TV

Model No.

Dimensions (W × H* 1

× D)

Mass

Model No.

Dimensions (W × H*

1

× D)

Mass

50-inch model

TX-P50VT65B

1,203 mm × 790 mm × 301 mm

(With Pedestal)

1,203 mm × 702 mm × 50 mm

(TV only)

31.5 Net (With Pedestal)

26.0 Net (TV only)

55-inch model

TX-P55VT65B

1,318 mm × 855 mm × 296 mm

(With Pedestal)

1,318 mm × 767 mm × 51 mm

(TV only)

38.5 Net (With Pedestal)

31.5 Net (TV only)

65-inch model

TX-P65VT65B

1,531 mm × 975 mm × 323 mm (With Pedestal)

1,531 mm × 887 mm × 51 mm (TV only)

50.5 Net (With Pedestal)

42.0 Net (TV only)

Power source

Panel

Speaker

Audio output

Headphones

Receiving systems /

Band name

Check the latest information on the available services at the following website.

http://panasonic.net/ viera/support

Satellite dish input

Aerial input

AC 220-240 V, 50 / 60 Hz

Plasma panel

Front speaker × 2, Woofer (Φ 75 mm) × 1

20 W (5 W + 5 W + 10 W)

M3 (3.5 mm) stereo mini Jack × 1

DVB-S / S2

(freesat / Other

Sat.)

DVB-T / T2

PAL I

PAL 525/60

freesat services via Satellite dish input

Receiver frequency range - 950 MHz to 2,150 MHz

Not available for DiSEqC control

Digital terrestrial services

UHF E21 - 68

Playback of NTSC tape from some PAL Video recorders (VCR) or

NTSC disc playback from DVD player and recorder

Playback from M.NTSC Video recorders (VCR)

M.NTSC

NTSC

(AV input only)

Playback from NTSC Video recorders (VCR)

DVB-S / S2

DVB-T

PAL I

PAL 525/60

Receiver frequency range - 950 MHz to 2,150 MHz

Not available for DiSEqC control

Digital terrestrial services

VHF A - J

CATV S1 - S20

UHF E21 - E69

CATV S21 - S41 (Hyperband)

Playback of NTSC tape from some PAL Video recorders (VCR) or

NTSC disc playback from DVD player and recorder

Playback from M.NTSC Video recorders (VCR)

M.NTSC

NTSC

(AV input only)

Playback from NTSC Video recorders (VCR)

Female F-type 75

Ω × 2

UHF VHF / UHF

Operating conditions

AV1 input / output

AV2 input

(COMPONENT /

VIDEO)

HDMI 1 / 2 / 3 input

Card slot

ETHERNET

USB 1 / 2 / 3

Temperature: 0 °C - 35 °C

Humidity: 20 % - 80 % RH (non-condensing)

SCART (Audio/Video in, Audio/Video out, RGB in)

VIDEO

AUDIO L - R

RCA PIN Type × 1

RCA PIN Type × 2

1.0 V[p-p] (75

Ω)

0.5 V[rms]

Y

P

B

, P

R

1.0 V[p-p] (including synchronisation)

±0.35 V[p-p]

TYPE A Connectors

HDMI1 / 3: 3D, Content Type, Deep Colour, x.v.Colour™

HDMI2: 3D, Content Type, Audio Return Channel, Deep Colour, x.v.Colour™

● This TV supports “HDAVI Control 5” function.

SD Card slot × 1

Common Interface slot (complies with CI Plus) × 1

RJ45, IEEE802.3 10BASE-T / 100BASE-TX

USB1 / 2: USB2.0 DC 5 V, Max. 500 mA

USB3: USB3.0 DC 5 V, Max. 900 mA

DIGITAL AUDIO output

PCM / Dolby Digital / DTS, Fibre optic

Built-in Camera

Built-in wireless LAN

Mass

Lens type

Usage temperature range

Battery

Materials

Lens: F2.0 Lens; FOV (D) 50.9° (in HD mode)

Focus: Fixed focus

Resolution: 1,280 × 720

Standard compliance and Frequency range*

2

:

IEEE802.11a/n

5.180 GHz - 5.320 GHz, 5.500 GHz - 5.580 GHz, 5.660 GHz - 5.700 GHz

IEEE802.11b/g/n

2.412 GHz - 2.472 GHz

Security: WPA2-PSK (TKIP/AES) WPA-PSK (TKIP/AES) WEP (64 bit/128 bit)

Standard Compliance: Bluetooth 3.0

Bluetooth wireless

technology*

3

Frequency Range: 2.402 GHz - 2.480 GHz

*1: With Camera pop-up: +23 mm height

*2: The frequency and channel differ depending on the country.

*3: Not all the Bluetooth compatible devices are available with this TV. Up to 5 devices can be used simultaneously

(except the 3D Eyewear and VIERA Touch Pad Controller).

3D Eyewear

Dimensions (W × H × D)

164.7 mm × 41.0 mm × 170.7 mm

Approx. 34

Liquid Crystal Shutter

0 °C - 40 °C

Coin-shaped lithium battery CR2025

Operation time: Approx. 75 hours in continuous use of the battery made by

Panasonic

Main body: Resin

Lens section: Liquid crystal glass

25

26

Electronic Touch Pen

Dimensions

Length: 186.7 mm

Diameter: 18.2 mm

Mass

Approx. 30 (excluding battery)

Usage temperature range

0 °C - 40 °C

Battery

Materials

Panasonic R03 battery

Operation time : approx. 8 hours

Panasonic LR03 battery

Operation time: approx. 30 hours

Main body: Resin

Note

● 3D Eyewear, Electronic Touch Pen and VIERA Touch Pad Controller use Bluetooth wireless technology.

● Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.

● For the information of power consumption, display resolution, etc., please refer to Product fiche.

● For the information of the open source software, refer to [eHELP] (Support > Licence).

● This equipment complies with the EMC standards listed below.

EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024

When using the wall-hanging bracket

For the recommended wall-hanging bracket, refer to [eHELP].

50-inch model

a: 400 mm

b: 300 mm

● Holes for wall-hanging bracket installation

a

55-inch model

a: 500 mm

b: 300 mm

b

65-inch model

a: 684 mm

b: 300 mm

Rear of the TV

Depth of screw

50-inch model

minimum: 10 mm

maximum: 16 mm

Diameter: M8

55-inch model

65-inch model

minimum: 17 mm

maximum: 23 mm

Screw for fixing the TV onto the wall-hanging bracket (not supplied with the TV)

(View from the side)

Plasma Television

Declaration of Conformity (DoC)

“Hereby, Panasonic Corporation declares that this TV is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC.”

If you want to get a copy of the original DoC of this TV, please visit the following website:

http://www.doc.panasonic.de

Authorized Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

This TV is intended to be used in the following countries.

Ireland, United Kingdom

The wireless LAN feature of this TV shall exclusively be used inside buildings.

27

Information for Users on Collection and Disposal of Old Equipment and used

Batteries

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.

Sales and Support Information

Customer Communications Centre

For customers within the UK: 0844 844 3899

For customers within Ireland: 01289 8333

Monday − Friday 9:00am − 5:00pm, (Excluding public holidays).

For further support on your product, please visit our website: www.panasonic.co.uk

Direct Sales at Panasonic UK

Order accessory and consumable items for your product with ease and confidence by phoning our Customer

Communications Centre Monday − Friday 9:00am − 5:00pm, (Excluding public holidays).

Or go on line through our Internet Accessory ordering application at www.pas-europe.com.

Most major credit and debit cards accepted.

All enquiries transactions and distribution facilities are provided directly by Panasonic UK.

It couldn’t be simpler!

Also available through our Internet is direct shopping for a wide range of finished products. Take a browse on our website for further details.

Customer’s Record

The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.

Model Number Serial Number

M0213-1033

Willoughby Road, Bracknell, Berkshire, RG12 8FP

Web Site: http://panasonic.net

© Panasonic Corporation 2013

Printed in Czech Republic

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement