Интеграционный контроллер WebHMI

Интеграционный контроллер WebHMI
WebHMI Integration controller
WebHMI allows you to build unified remote monitoring
or control system for a set of automation devices using a standard
Web browser — on the local network or the Internet. Project
development does not require high qualification and skills — it
is done in configuration mode.
Features and Advantages
 Direct control and monitoring via the web — in a local network or the Internet,
from any platform — mobile phone device, tablet, laptop, computer, etc., simultaneously
from different locations, with no limit on the number of users
 On-line Development Environment, which is available and ready immediately after the device
power on, with no restrictions on the number of tags or licenses for additional software
 API to communicate directly with user applications
 Support for popular industrial protocols, with the ability to use different protocols
on the same physical line, and to add custom protocols
 The devices can be used for supervisory control of distributed systems when they transmit
data to the upper layer (including “cloud” website)
Built-in interface editor: built-in editor that runs in a common web
browser allows you to create visual screens similar to the screens in HMI
or SCADA systems, with elements of text, vector graphics, animation,
trends, historical graphs, messages, text entry fields, and elements
of recipe control.
Access control: different levels of access can be granted for different users
as well as access restrictions to specific dashboards (screens)
with the
Supported protocols: Allen-Bradley DF1, Delta Electronics DVP, Modbus
RTU/ASCII/ TCP, ОWЕN, Siemens PPI, Siemens S7 Communication Iso-OverTCP, 1-Wire.
«Multi-protocol» function: ability to work simultaneously with different
protocols on the same physical line.
WebHMI Integration controller
Custom protocols: for non-standard or not supported devices, the user
himself can add program code to send and receive protocol telegrams,
using a handy scripting language.
Data exchange optimization: there are possibilities of assigning different
priorities for communication to get faster response and speed for specific
data, fixing scan time, and using block reads for faster data exchange.
"Any-to-any protocol" gateway function: using the built-in scripting language,
you can easily implement data exchange between different
(with incompatible protocols) automation devices connected to WebHMI,
like PLCs, remote I/O, etc.
Custom API: using API calls, WebHMI can directly exchange data with
any business or user applications, other web-sites etc.
ModBus TCP Server: a group of tags can be accessed by external clients like
SCADA system, PLC or another WebHMI, via Modbus TCP protocol
User-scripts: the user can write functions in popular scripting language Lua,
for implementing fairly complex algorithms of data processing, schedulers,
logic control (similar to PLC) etc.
Messages sending via SMS or Telegram messenger
Built-in functions of the router: routing, firewall, NAT, and other features
allow you to integrate WebHMI in any network infrastructure without
additional network equipment
Wi-Fi interface: can work simultaneously in different networks, as a client
and as an access point, WPS mode is also supported
VPN support: simple implementation of remote access to the system,
without use of “white” IP-addresses.
NTP server/client: time synchronization via NTP protocol
Built-in support for 3G modems. Modem re-initialization by disabling USB
power is supported too.
Remote service access: user can operate the equipment connected
to WebHMI using service and development tools, via a virtual COM port and
Ethernet (using the possibility of forwarding traffic over the gateway)
WebHMI Integration controller
Ultra-compact, fan-less
MIPS processor architecture, Embedded Linux
SD card
2 × Ethernet 100BASE-T,
RJ45 with galvanic isolation, ESD 3 kV
1 × WLAN 802.11 b/g/n (transmitter power 100 mW),
RP-SMA antenna connector
1 × RS-485, «Multi-protocol» mode, 250/921 Kbits/sec*, with
galvanic isolation of 2500 V, ESD – 8 kV
1 × USB 2.0 — load capacity up to 500 mА, controlled power,
ESD protection comp. IEC 61000–4–2 level 4: 15 kV (air
discharge) — 8 kV (contact)
Additional ports: RS-232/422/485, M-bus, 1–Wire, etc. via
USB converters
3G-modems support
2 × solid state relays (125mA, 240V)
Watchdog timers
Yes (system and communication)
Configurable poll time (up to 5 ms)
Speed and performance
Adjustable frequency of the data display in the web interface
(up to 50 ms)
24V (18...32V)
25mА (without USB devices)
Built-in UPS (Li–Po battery, 7.4V 650mAh)
ABS-plastic, mounting on DIN-profile
Dimensions (HxWxD)
101×35×120 mm.
300 gr.
Temperature range
0—50 ˚С
Standard compliance
CISPR 22:2007, CISPR 24:2008 (CISPR 24:1997, IDT),
4467–1:2005, IEC 61131-2:2006, 3626-97
Contents of package
Packaging, interface connector, Wi–Fi antenna, warranty card
*Depends on the device version
WebHMI Integration controller
Dimensional drawing
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF