advertisement
Power Tools
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15
71711 Steinheim/Murr-Germany
Telephone +49 (0) 7144 828-0
Telefax +49 (0) 7144 25899 [email protected] www.flex-tools.com
Subject to technical modifications.
Your FLEX retailer
2007
Type
A
AC 12
ACH 14
ACH 19
AL 10
AL 11
ALC 311
ALC 514
ALP 305
ALR 512
B
BED 18
BED 55
BED 69
BED 163
BED 303
BH 612 VR
BHI 822 VR
BHW 812 VV
NEW
BHW 1549 VR
BRL 3501 A
BSW 2123 C
BSW 3023 C
C
CS 3455 A
CSM 4060
CSW 4160
F
F 1109
FS 3403 VRG
NEW
H
H 1105 VE
H 1127 VE
H 1206
H 1212 Z
HPI 603
L
L 602 VR
L 602 VR-Set
L 1202
L 1501 VR
L 1710-FRA
L 1710 FRC
L 2106 VC
L 2108 VC
NEW
L 3206 CD
L 3208 CD
L 3309/125
L 3309 FR
NEW
NEW
L 3309 FRG
L 3403 VRG
L 3403 VRG-Set
L 3406 VRG
L 3410 FR
102
102
103
135
135
132
132
134
133
111
112
112
113
113
109
109
110
111
103
114
114
10
45
45
13
10
17
17
9
9
12
12
15
15
44
44
47
47
Page
60
61
62
37
92
18
18
19
19
92
Type
L
L 3410 FRG
L 3410 VR
L 3709/115
L 3709/125
NEW
NEW
L 3806 C
LBR 1506 VRA
LBS 1105 VE Profi-Set
LD 1709 FR
LD 3206 C
LDB 1709 FR
LG 1707 FR
LK 604
LL 1107 VEA
LLK 1503 VR
LP 1503 VR Profi-Set
LRP 1503 VRA
LST 803 VR
LST 1503 VR
M
MS 713
NEW
MS 1706 FR-Set
R
R 500 FR
R 502 FR
R 600 VV
RZ 600 VV
S
S 36
S 36 M
S 203 BVE
S 203 KVE
S 2902 VV-Basic
SK 602 VV
SKE 2902 VV
SKL 2903 VV
SR 602 VV
ST 1005 VE
T
TCS 3602
NEW
V
VP 5
W
WD 10
WS 702 VEA
WS 1505 FR
WSK 702 VEA
X
X 1107 VE
XC 3401 VRG
NEW
XC 3401 VRG-Set
XS 713
NEW
NEW
Page
124
125
59
59
56
58
56
57
58
28
60
115
115
78
86
79
37
46
46
36
36
96
70
70
71
71
38
30
26
29
88
89
14
13
91
91
14
28
27
88
11
11
8
8
How to get to FLeX
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15
D-71711 Steinheim/Murr-Germany
Telephone +49(0)7144 828-0
Telefax +49(0)7144 25899 [email protected] www.flex-tools.com
FLEX Customer service.
On-line around the clock for you.
Our customer service can be reached by phone Monday through Friday and any day via the Internet. For all questions about FLEX quality electrical power tools, accessories, and spare parts, but also for quick referral to the nearest FLEX dealer in your area.
Customer service:
Telephone: 07144 828-0 | Telefax: 07144 25899 e-mail: [email protected]
Internet: www.flex-tools.com
Should you wish to give us your opinion, make suggestions on improving FLEX machines, or tell us how we can expand our program – please do send us an e-mail:
FLEX Service centre.
The experts for quick action and good advice.
In case your FLEX requires service – no problem: You send your machine with a brief fault description to our local service centre, we will carry out the service and send your FLEX back to you as fast as possible. And should you have any questions on the technology or the accessories, just give us a call.
FLEX retailers.
Where professional technology and competent consultation meet.
No question: advance technology is accompanied by knowledgeable specialist consulting. That is why FLEX quality electrical power tools are available exclusively from qualified dealers. And qualified means in this case:
Whoever is a FLEX dealer has been trained on FLEX and has competent answers for the trickiest questions.
11
141
Contents
Angle grinders / straight grinders
Angle grinders
Straight grinders
Accessories angle and straight grinders
Surface finishing
Metal surface finishing
Accessories metal surface finishing
Universal surface finishing
Accessories universal surface finishing
Polishers
Polishing machines
Saws
Sabre saws
Jigsaws
Circular saws
Accessories saws
Mixers
Mixing machines
Accessories mixers
Floor and wall finishing
Long-neck and short-neck sanders
Long-neck renovation sander
Accessories long-neck renovation sander
Renovation sanders
Accessories renovation sanders
Bushhammers
Renovation scouring machines
Accessories for renovation milling machines
Wall chaser
Accessories wall chasers
Screwdrivers, drills, hammers
Cordless machines
Rotary hammer drill
93
96
97
90
91
92
74
78
80
86
87
88
98
102
103
40
44
48
52
56
59
60
63
66
70
72
Page Chapter
1
18
20
4
8
22
26
31
36
39
2
3
4
5
6
7
Core drill technology
Core drilling machines
Core drilling units
Vacuum pump, water pressure tank
Accessories core drill technology
Industrial vacuum cleaners
All-round vacuum cleaners
Accessories industrial vacuum cleaners
Measuring technology
Laser measuring technology
Accessories laser measuring technology
Information
Warranty
FLEX Electronics
FLEX Modular system / FLEX Training
FLEX Addresses
120
124
126
128
132
137
138
138
139
140
141
104
109
111
111
115
116
8
9
10
11
1
7
8
5
6
3
4
1
2
9
10
11
2
THE POWER OF THE
STRONG BRAND
You need quality tools to do quality work. But what are quality tools?
How do I recognise real quality? And when is a tool worth its cost?
For FLEX it‘s the craftsman who sets the standard. That is why we visit those sites where tools are used when we develop new machines. On construction sites, in the shops and factories. And that‘s precisely where we determine the specifications that every FLEX must fulfil.
Foremost this includes the proven longevity of our machines. Then their power and functionality. Also the design, the ergonomics, and the safety of a FLEX. And of course its advanced technology that always provides new solutions to problems, revolutionising the work procedures of entire industries. We are proven right by each of the millions of craftsmen who perform outstanding work using their FLEX every day.
Working with a FLEX puts you in the top quality league. That you can feel sure about.
This is what counts:
FLEX Product quality:
FLEX Development: High tech already during construction
FLEX Components: Top quality with all materials
FLEX Production: No tolerance for tolerances
FLEX Quality control: Toughest field and endurance tests
FLEX Service quality:
FLEX Retailers: Competent advice, training, and local presentations
FLEX Service centre: Puts your FLEX back into top condition
FLEX Repair and spare-parts service: Just a call away
FLEX Warranty processing: Fair treatment with „no questions asked“
FLEX Recycling service: Responsible disposal of old machines and batteries
3
4
From the inventors of the FLEX:
The angle grinders for the 21st century
Angle grinders / straight grinders
What do professionals use for grinding?
No question: a FLEX. And it was FLEX engineers who 80 years ago combined stationary electrical motors with a flexible shaft. This shaft coined the brand name FLEX.
It was about 50 years ago when FLEX then invented the first high-speed angle grinder. Thus FLEX and flexing became terms for professional cutting, roughing down, and grinding.
The most recent examples from FLEX development show that even today we set the standards for angle grinders. Using state-of-the-art technology, maximum user friendliness, and innovative product features: microprocessor electronics, extensive protection against abrasive swarf, unique convenience details such as the SoftVib-Handle, which reduces vibration levels by up to 60%. Or the FLEX MultiGrip system with the two step-adjustable handles on the 2 500 Watt RedBear angle grinder. And much, much more.
Thus FLEX offers one of the most sophisticated and innovative angle grinder programs in the world. And you have in your hands the machines that you need for perfect results. Let’s flex!
5
1
Application examples: Angle grinders
1
FIGHT VIBRATION –
FLEX SOFTVIB-HANdLE
The vibration damping construction of the elastic body of the SoftVib-Handle reduces vibration levels when compared to standard handle by up to 60%. The hand and arm joints of the user are subjected to less stress.
starting page 9
FLEX MULTI-GRIP
SySTEM
The front and the back vibration damping handles can be adjusted in steps up to 180 degrees. RedBear angle grinder L 3206 cd
Page 17
PREPAREd FOR EXTREME cONdITIONS
FLEX angle grinders are optimally protected from rough and conductive swarf by a powder coating on the magnetic fields.
FLEX SOFTVIB -
THE MULTI-HANdLE
The built-in face pin wrench is protected under a rotatable cover ring ...
... for a quick tool exchange without the need for additional tools.
starting page 9
FIXTEc qUIck-AcTION cLAMPING NUT INcLUdEd
AS STANdARd
For a quick, tool-free disc change: simply open the clamp, press the spindle lock, unscrew the FixTec nut in an anti-clockwise direction and change the disc.
starting page 9
6
Angle grinders / straight grinders
1
2
3
4 5
6
1
7 8 9 10
11
1
2
Air vents to front
Protects user and motor from abrasive swarf.
Large ventilator
Optimised in wind tunnel tests for maximum cooling.
3
Winding protecting cage
Rotating ribs prevent abrasive swarf from damaging the windings of the armature and provide for additional cooling. This extends the service life of the motor considerably.
4 High-performance armature
Sustained power and endurance, heat-resistance. Winding protected from aggressive swarf by a winding protecting cage.
5
6
7
8
9
10
11
Quality auto-stop carbon brushes
Protects the motor from damage.
Microprocessor electronics
Greater performance, safer, more convenience.
Gearbox housing made of die-cast aluminium
Light, sleek, robust.
Spindle lock
double safety because of recessed design.
FLEX SoftVib – the multi-handle
The vibration damping construction of the elastic body of the
SoftVib-Handle reduces vibration levels noticeable. With built-in holding wrench - for exchanging the discs without additional tools.
Patented safety disc guard
Adjustable without tools, impossible to lose, with rotation lock.
Perfection to the very last detail
Highly flexible cable bushing prevents cable breakage. 4-metre power cable with FLEX-red plug.
•
•
FLEX electronics:
More power, safer, longer service life
•
•
•
Four-fold microprocessor electronics: with consistent speed control, soft start, starter lock, and overload protection
Five-fold microprocessor electronics: with consistent speed control, soft start, starter lock, overload protection, and temperature monitoring
Six-fold microprocessor electronics: with consistent speed control, soft start, starter lock, overload protection, temperature monitoring, and speed selection set by an adjustment wheel
FLEX Performance:
What is transfered to the disc is critical
•
•
•
•
Outstanding output: thanks to complexly machined high-performance armature
High operating efficiency: great energy with cost-efficient operation
Best endurance run characteristics: due to high manufacturing precision
FLEX Ergo design: created for precise, low-fatigue work
„Optimal centre of gravity: precisely in the middle of the machine; fine balanced to the gram
Sleek motor case: with ergonomic, waisted grip depression
Structure surface*: no slipping, for a secure grip
*on G-versions with super-slender rear special grip
7
Angle grinders
1
L 3709/115
334.979
New
L 3709/125
334.987
New
The 750 Watt angle grinder
Extreme slim body design with ergonomic form, light weighted and an excellent price performance ratio.
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
The 800 Watt angle grinder
Extreme slim body design with ergonomic form, light weighted and an excellent price performance ratio.
L 3709/115
115 mm
11000 rpm
750 Watt
450 Watt
M 14
1,8 kg
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
L 3709/125
125 mm
11000 rpm
800 Watt
470 Watt
M 14
1,8 kg
STANDARD EQUIPMENT
1 side handle
1 piece
STANDARD EQUIPMENT
1 side handle
1 piece
ADVANTAGES AT A GLANCE
• Compact dimensions
• Additional handle for right and left handed use
• Tool-free adjusting of safety guard
• Extensive dust protection for motor and gears
• Flat gearbox of light alloy: reaches into all corners
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
8
Angle grinders / straight grinders
ADVANTAGES AT A GLANCE
• FLEX Motor: designed to handle substantial loads with high efficiency for powerful output, great endurance thanks to perfect cooling, and air vents aimed to front
• With elastic SoftVib-Handle: greatly reduces the vibration level so the user is subjected to less stress. Also with integrated pin spanner for wrench-free disc changing. It can be fitted on the left or right.
• Safety guard: patented, with antitwisting lock
• Spindle lock: for easy disc changes
• Gearbox: particularly flat and robust aluminium die-cast construction, accesses all corners
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• 4 m power cord: with FLEX red plug
ADDITIONALLY FOR L 3309 FR
• FLEX four-fold microprocessor electronic control: consistent speed control by tachometer generator, soft start, power interruption safety lockout, overload protection
L 3309/125
299.235
L 3309 FR
296.805
The 710 Watt FLEX, a handy model without any rough edges
Handy, light, and versatile - that's the small
FLEX. So that you can guide it especially carefully and precisely its motor housing has a very slender waist in the grip area. The operator's hand rests safe and secure right over the centre of gravity of the machine.
And the switch on the side can be easily reached from all positions. You work much more easily and less stressfully because of the optimal balance and the low weight.
The 1010 Watt FLEX puts power in the disc
This little giant can output around 50% more power than the L 3309, thanks to electronic motor management. In addition to this, FLEX four-fold microprocessor electronic control enables controlled acceleration to suit the particular stress level, stepping on the gas if increased load occurs until the optimum speed is achieved again. Fits perfectly in the hand thanks to the slim, saddle-shaped motor housing and easily-accessible side switch.
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
L 3309/125
125 mm
10000 rpm
710 Watt
420 Watt
M 14
1,9 kg
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
L 3309 FR
125 mm
11000 rpm
1010 Watt
610 Watt
M 14
1,9 kg
STANDARD EQUIPMENT
1 guard 125 Ø
1 SoftVib-Handle
294.438
316.857
STANDARD EQUIPMENT
1 guard 125 Ø
1 SoftVib-Handle
1 FixTec quick-clamp nut M 14
294.438
316.857
313.459
1
Patented safety disc guard
Can be adjusted without tools in 24 steps by 360°. Rotates in one direction only.
With rotation lock.
9
Angle grinders
1
L 3309 FRG
298.425
L 3410 FR
296.007
The super-slim 1010 Watt FLEX takes care of every surface
The slender back stick handle of the surfacepro makes extremely flat attack angles possible. With lockable on/off switch located underneath. Thanks to balanced weight distribution the machine rests well in your hand. The structured handle surface is nonslip and provides a safe grip even when wearing work gloves.
The 1400 Watt FLEX with superior power performance
This powerful FLEX is exactly what you need where a particularly high torque is called for.
Its power input can be increased briefly to a staggering 2200 Watt if needed. This enormous power is derived from a high-performance armature and the electronic control. For the highest level of efficiency and operation which saves both energy and costs. Because power to the disc is what counts.
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
STANDARD EQUIPMENT
1 guard 125 Ø
1 SoftVib-Handle
1 FixTec quick-clamp nut M 14
L 3309 FRG
125 mm
11000 rpm
1010 Watt
610 Watt
M 14
1,9 kg
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
294.438
316.857
313.459
STANDARD EQUIPMENT
1 guard 125 Ø
1 SoftVib-Handle
1 FixTec quick-clamp nut M 14
L 3410 FR
125 mm
11000 rpm
1400 Watt
880 Watt
M 14
2,2 kg
294.438
316.857
313.459
ADVANTAGES AT A GLANCE
• With elastic SoftVib-Handle: greatly reduces the vibration level so the user is subjected to less stress. Also with integrated pin spanner for wrench-free disc changing. It can be fitted on the left or right.
• Safety guard: patented, with antitwisting lock
• Spindle lock: for easy disc changes
• Gearbox: particularly flat and robust aluminium die-cast construction, accesses all corners
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• 4 m power cord: with FLEX red plug
ADDITIONALLY FOR L 3309 FRG
• FLEX four-fold microprocessor electronic control: consistent speed control by tachometer generator, soft start, power interruption safety lockout, overload protection
• FLEX Motor: designed to handle substantial loads with high efficiency for powerful output, great endurance thanks to perfect cooling, and air vents aimed to front
• Switch: with lock-off / lock-on switch
• Slender back stick handle: with dustprotected on/off switch located underneath, safety catch and lock
ADDITIONALLY FOR L 3410 FR
• FLEX five-fold microprocessor electronic control: consistent speed control by tachometer generator, soft start, power interruption safety lockout, overload protection and temperature monitoring
• FLEX Motor: designed to handle substantial loads with highest efficiency for powerful output, great endurance thanks to perfect cooling, and air vents aimed to front
10
Angle grinders / straight grinders
ADVANTAGES AT A GLANCE
• FLEX Motor: designed to handle substantial loads with highest efficiency for powerful output, great endurance thanks to perfect cooling, and air vents aimed to front
• With elastic SoftVib-Handle: greatly reduces the vibration level so the user is subjected to less stress. Also with integrated pin spanner for wrench-free disc changing. It can be fitted on the left or right.
• Safety guard: patented, with antitwisting lock
• Spindle lock: for easy disc changes
• Gearbox: particularly flat and robust aluminium die-cast construction, accesses all corners
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• 4 m power cord: with FLEX red plug
ADDITIONALLY FOR L 3410 FRG
• FLEX five-fold microprocessor electronic control: consistent speed control by tachometer generator, soft start, power interruption safety lockout, overload protection and temperature monitoring
• Switch: with lock-off / lock-on switch
• Slender back stick handle: with dustprotected on/off switch located underneath, safety catch and lock
ADDITIONALLY FOR L 3410 VR
• FLEX Six-fold microprocessor electronics: Speed selection, consistent speed control by tachometer generator, soft start, restart protection after power interruption, overload protection, and temperature monitoring
L 3410 FRG
296.201
The super-slim 1400 Watt FLEX roughs down everything with ease
The superior staying power, combined with the slender back stick handle for extremely flat attack angle and balanced weight distribution: That is what an angle grinder should look like that can take on the thickest layers and widest areas. The structured handle surface provides a secure grip. With lockable on/off switch located underneath.
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
STANDARD EQUIPMENT
1 guard 125 Ø
1 SoftVib-Handle
1 FixTec quick-clamp nut M 14
L 3410 VR
296.260
The variable 1400 Watt FLEX for the high speed range
A master of versatility, thanks to variable speed and excellent power. Ideal for grinding, roughing, cutting, deburring and removal of rust. No matter what the task may be, the slim, saddle-shaped motor housing and easily-accessible side switch mean that this FLEX sits perfectly in your hand.
L 3410 FRG
125 mm
11000 rpm
1400 Watt
880 Watt
M 14
2,2 kg
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
294.438
316.857
313.459
STANDARD EQUIPMENT
1 guard 125 Ø
1 SoftVib-Handle
1 FixTec quick-clamp nut M 14
L 3410 VR
125 mm
2900-11000 rpm
1400 Watt
880 Watt
M 14
2,2 kg
294.438
316.857
313.459
1
Slender rear special grip
Ideal for surface finishing because of the extremely flat approach angle and balanced weight distribution. With dust-protected on/off switch located underneath, safety catch and lock.
11
Angle grinders
1
L 1710 FRA
259.733
L 1710 FRC
334.200
New
The classical 1400 Watt FLEX with the extra-flat gearbox
A soft start - then full grinding and cutting power. The three-fold full-wave electronic control enables extremely powerful disc control. The tightest corners and areas difficult to access are no longer a problem, thanks to the flat gearbox design.
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
STANDARD EQUIPMENT
1 guard 125 Ø
1 SoftVib-Handle
L 1710 FRA
125 mm
10000 rpm
1400 Watt
880 Watt
M 14
2,4 kg
274.658
316.857
The classic 1400-Watt-Flex with clean air pipe
Soft start- and then the complete power for grinding and cutting. Its three fold electronic brings all the enegy to the disc.Thanks to its flat construction even tight and difficult areas are not a problem. The 0,5 m Clean-Air
Pipe greately reduces the amount of dirty air sucked into the machine preventing contamination of the motor, the electric cable also runs through the pipe keeping things neat and tidy.
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
L 1710 FRC
125 mm
10000 rpm
1400 Watt
880 Watt
M 14
2,5 kg
STANDARD EQUIPMENT
1 guard 125 Ø
1 SoftVib-Handle
274.658
316.857
ADVANTAGES AT A GLANCE
• FLEX three-fold full-wave electronic control: consistent speed control by tachometer generator, soft start, overload protection
• FLEX Motor: designed to handle substantial loads with highest efficiency for powerful output, great endurance thanks to perfect cooling, and air vents aimed to front
• With elastic SoftVib-Handle: greatly reduces the vibration level so the user is subjected to less stress. Also with integrated pin spanner for wrench-free disc changing. It can be fitted on the left or right.
• Quick-change guard for universal adjustment. Safety groove prevents the guard from slipping off
• Spindle lock: for easy disc changes
• Gearbox: particularly flat and robust aluminium die-cast construction, accesses all corners
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• 4 m power cord: with FLEX red plug
ADDITIONALLY FOR L 1710 FRC
• 0,5 m Clean-Air Pipe: The cooling air is not sucked into the machine from the dusty air that surrounds the work area so the motor is protected
Always clean cooling air
The cooling air is no longer sucked in through the motor housing but exclusively through the end of the clean air pipe. Grinding dust does not stand a chance to enter the motor, optimal protection for the machine.
12
Angle grinders / straight grinders
ADVANTAGES AT A GLANCE
• Spindle lock: for easy disc changes
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
ADDITIONALLY FOR L 3406 VRG
• FLEX Six-fold microprocessor electronics: Speed selection, consistent speed control by tachometer generator, soft start, restart protection after power interruption, overload protection, and temperature monitoring
• FLEX Motor: designed to handle substantial loads with highest efficiency for powerful output, great endurance thanks to perfect cooling, and air vents aimed to front
• With elastic SoftVib-Handle: greatly reduces the vibration level so the user is subjected to less stress. Also with integrated pin spanner for wrench-free disc changing. It can be fitted on the left or right.
• Quick-change guard for universal adjustment. Safety groove prevents the guard from slipping off
• Switch: with lock-off / lock-on switch
• Gearbox: particularly flat and robust aluminium die-cast construction, accesses all corners
• 4 m power cord: with FLEX red plug
ADDITIONALLY FOR LK 604
• FLEX Motor: designed to handle substantial loads with high efficiency for powerful output, great endurance thanks to perfect cooling
• Flexible sanding pad: included with
170 mm Ø in standard equipment
• Grip cover: extremely sensitive guiding
• 4 m power cord
L 3406 VRG
297.321
LK 604
250.346
The variable 1400 Watt FLEX for the medium speed range
Great staying power, low gear ratio, plus speed selection with adjustment wheel for controlled acceleration to the required speed.
This gives you a sensitive polisher on one hand and a powerful grinder in the mid-speed range on the other hand. With special slender ergonomic rear handle for extremely flat approach angles.
The 1200 Watt FLEX with optimum guiding characteristics
Light, easy to guide and still extremely powerful, that's the robust medium-range grinder from FLEX. It can be operated without a guard when using flexible 170 mm sanding pads. The practical gearbox and slim back handle enable sensitive working and optimum machine guiding.
SPECIFICATIONS
Max. disc diameter
Max. polishing pad diameter
Speed without load
Power input
Power output
Tool fixture
Weight
L 3406 VRG
125 mm
150 mm
2100-7500 rpm
1400 Watt
880 Watt
M 14
2,2 kg
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
LK 604
175 mm
4000 rpm
1200 Watt
720 Watt
M 14
3,2 kg
STANDARD EQUIPMENT
1 guard 125 Ø
1 SoftVib-Handle
1 FixTec quick-clamp nut M 14
274.658
316.857
313.459
STANDARD EQUIPMENT
1 side handle
1 pin wrench
1 flexible sanding pad 170 Ø + clamping nut M 14
1 grip cover
252.721
100.110
124.079
253.676
1
13
Angle grinders
1
LG 1707 FR
256.131
L 3806 C
306.363
The light, powerful FLEX Tadpole®
A powerful gearbox at the front and slim and slender rear design. The FLEX Tadpole® only weighs 2500 grams and produces 1500 Watts of enduring power. The three-fold full-wave electronic control ensures consistent speed control, even under extreme loads. It also features soft start and overload protection.
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
LG 1707 FR
180 mm
7500 rpm
1500 Watt
1060 Watt
M 14
3,1 kg
The new FLEX 2100 Watt model
Powerful angle grinder for cutting, roughing down, and sanding with 230-grit discs.
Exceptional ergonomic design with flat gear head and special dust protection at a very good price-performance ratio.
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
L 3806 C
230 mm
6500 rpm
2100 Watt
1385 Watt
M 14
5,6 kg
STANDARD EQUIPMENT
1 guard 180 Ø
1 SoftVib-Handle
251.481
316.857
STANDARD EQUIPMENT
1 guard 230 Ø
1 side handle
1 pin wrench
311.952
311.979
100.110
ADVANTAGES AT A GLANCE
• Spindle lock: for easy disc changes
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
ADDITIONALLY FOR LG 1707 FR
• FLEX three-fold full-wave electronic control: consistent speed control by tachometer generator, soft start, overload protection
• FLEX Motor: designed to handle substantial loads with high efficiency for powerful output, great endurance thanks to perfect cooling, and air vents aimed to front by additional airflow baffle
• With elastic SoftVib-Handle: greatly reduces the vibration level so the user is subjected to less stress. Also with integrated pin spanner for wrench-free disc changing. It can be fitted on the left or right.
• 4 m power cord
ADDITIONALLY FOR L 3806 C
• Electrical surge protection: for a soft start without power overloading
• Tool-free adjusting of safety guard
• Optimized dust protection of the motor and the gearbox
• Air exits at front, so the user is protected against grinding dust
• Additional handle: can be used in 3 positions
14
Angle grinders / straight grinders
ADVANTAGES AT A GLANCE
• FLEX Motor: designed to handle substantial loads with high efficiency for powerful output, great endurance thanks to perfect cooling, and air vents aimed to front
• Electrical surge protection: for a soft start without power overloading
• FLEX Metal composite housing: endurance tested and robust
• Additional handle: can be used in 3 positions
• Switch: with lock-off / lock-on switch
• Quick-release guard: tool-free adjustment
• Spindle lock: for easy disc changes
• Carbon brush holders: particularly large, solid brass for rapid thermal dissipation
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• 4 m power cord
L 2106 VC
259.017
L 2108 VC
259.179
The classic 2000 Watt FLEX for cutting, roughing and grinding
With 6000 revs it's perfect for all jobs with
230-grit discs on metal and concrete. Its heat-resistant FLEX metal composite housing guarantees an additional cooling effect by improved heat exchange, even after switching off the machine. Plus it withstands the greatest loads.
The classic 2000 Watt FLEX roughs its way through everything
With 8500 revs exactly right for roughing down with the 180-grit disc. Be it rust or weld seams, it clears out everything. Its heat-resistant FLEX metal composite housing guarantees an additional cooling effect by improved heat exchange, even after switching off the machine. Plus it withstands the greatest loads.
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
L 2106 VC
230 mm
6000 rpm
2000 Watt
1400 Watt
M 14
6,1 kg
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
L 2108 VC
180 mm
8500 rpm
2000 Watt
1400 Watt
M 14
6,1 kg
STANDARD EQUIPMENT
1 guard 230 Ø
1 side handle
1 pin wrench
265.179
193.356
100.110
STANDARD EQUIPMENT
1 guard 180 Ø
1 side handle
1 pin wrench
265.160
193.356
100.110
FLEX Metal composite housing
A classic of sandwich construction design by FLEX: A tough, heat-resistant, light aluminium die-cast outer shell. On the inside a highly insulating plastic shell for electrical protection and motor noise reduction. Plus solid brass carbon holders for optimal heat dissipation.
1
15
The FLEX RedBear:
Bear power and utmost convenience
1
1 Robust gears
With extra-wide tooth flanks for optimal transmission of power.
2
3
4
5
6
7
Needle roller born drive shaft
For low-wear run and precise guiding of the grinding or cutting disc.
High-performance ball bearing
Sealed at both ends. Rear bearing with rubber damping for reduced vibration run.
FLEX Special ventilator
High air flow, better cooling – for extended service life and more output.
High-quality insulating material
Winding protected from abrasive swarf by a winding protecting cage. More power by tight winding.
Winding protecting cage
Rotating ribs prevent abrasive swarf from damaging the windings of the armature and provide for additional cooling. This extends the service life of the motor considerably.
High-performance armature
Precisely balanced. Shaft with ribbing for reliable torque transmission. High armature speed provides more power and air flow.
1 2 3
8
9
Armoured collector
With reinforced ring for stabilization against centrifugal forces.
Quality auto-stop carbon brushes
With extra long replacement interval, dust-protected carbon holders. Easy carbon brush replacement.
4 5 6 7 8 9
10
11
12
13
14
15
16
17
18
19
Flat gear head
Good in tight spaces.
Disc guard with coding
With tool-free quick clamp and safety coding.
Spindle lock
For easy disc changes.
Patented multi-grip system
Handle with safety catch, adjustable in steps by 180 degrees:
Unscrew, snap in, screw in – finished! The vibration damping construction of the elastic body of the SoftVib-Handle reduces vibration levels noticeable.
Three point support
For secure deposit of the FLEX.
Robust motor case
Buckling resistant, glass fibre reinforced polyamide. Short design.
Damping element
Reduces the amount of vibration which is transferred to the back handle.
Starting-current limitation
For a safe start without overloading the mains.
Turning handle
Adjustable at the press of a button by 2 x 90°. Made of glass fibre reinforced polyamide.
Dead-man‘s safety switch
Dust-proof switch with safety catch and lock.
10 11 12 13
20 Perfection to the very last detail
Extra robust cable bushing and 4-metre cable with FLEX-red plug.
14 15 16 17 18 19
20
16
Angle grinders / straight grinders
ADVANTAGES AT A GLANCE
• FLEX Motor: designed to handle substantial loads with high efficiency for powerful output, great endurance thanks to perfect cooling, and air vents aimed to front
• FLEX Multi-Grip-System with Vibration damping: front Soft-Vib hand grip can be adjusted in steps up to 180°. With safety locking. The back anti vibration handle can be adjusted 2 x 90° for cutting left and right handed.
• With elastic SoftVib-Handle: greatly reduces the vibration level so the user is subjected to less stress
• Electrical surge protection: for a soft start without power overloading
• Gearbox: particularly flat and robust aluminium die-cast construction
• Quick-release guard: tool-free adjustment
• Spindle lock: for easy disc changes
• 3 point rest: Safe resting for your FLEX
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• 4 m power cord
L 3206 CD
322.717
New
L 3208 CD
322.725
New
The FLEX Red Bear: cutting and grinding made easy
Strong as a Bear 2500 Watt continuous power by 6500 rpm: steel, welding seams and concrete do not stand a chance, because with tough jobs perfect ergonomics are what counts, the RedBear is fitted with the FLEX
Multi-Grip and vibration damping system. The side SoftVib Hand grip and the elastic jointed rear handle allows for greatly reduced vibration and more comfortable working, its weight is perfectly balanced.
The FLEX Red Bear: your choice for roughing work
With 8500 rpm, the fast RedBear is particularly in its element when roughing down. The lead hand lies in a perfectly balanced position in front of the centre of gravity. In this way, delicate work such as sanding down weld seams can be carried out with as little effort as possible. It is equipped with the
FLEX multi-grip system and with vibration damping: thanks to the SoftVib side handle and the elastic connecting elements isolating the rear handle, the vibrations are noticeably reduced in both handle positions. This prevents the user from becoming fatigued too quickly and guarantees faster work progress.
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
L 3206 CD
230 mm
6500 rpm
2500 Watt
1700 Watt
M 14
6,2 kg
SPECIFICATIONS
Max. disc diameter
Speed without load
Power input
Power output
Tool fixture
Weight
L 3208 CD
180 mm
8500 rpm
2500 Watt
1700 Watt
M 14
6,0 kg
STANDARD EQUIPMENT
1 guard 230 Ø
1 SoftVib-Handle
1 pin wrench
265.179
325.376
100.110
STANDARD EQUIPMENT
1 guard 180 Ø
1 SoftVib-Handle
1 pin wrench
265.160
325.376
100.110
1
17
Straight grinders
1
H 1105 VE
269.956
H 1127 VE
270.067
Low-speed FLEX straight grinder
The low-speed lightweight is ideally suitable for precision grinding in tool and die construction with grinding pins and flap-type grinding wheels up to max. 25 m/sec. Its practical grip cover facilitates extremely sensitive guiding. It can also be used as a support grinder without the grip cover.
High-speed FLEX straight grinder
The high-rev, long-neck version provides the best grinding capacity and vibration free running: Just the right thing for working on metal, wood and plastics. Machine length approx. 325 mm, collar length approx.
60 mm.
SPECIFICATIONS
Max. disc diameter resin/ceramic up to
Max. disc diameter fiber reinforced up to
Tool fixture
Speed without load
Power input
Power output
Weight
H 1105 VE
30 mm
50 mm
Ø 3, 1/4", 6, 8 mm
2500-6500 rpm
710 Watt
420 Watt
2,1 kg
SPECIFICATIONS
Max. disc diameter resin/ceramic up to
Max. disc diameter fiber reinforced up to
Tool fixture
Speed without load
Power input
Power output
Weight
H 1127 VE
30 mm
50 mm
Ø 3, 1/4", 6, 8 mm
10000-30000 rpm
710 Watt
420 Watt
1,8 kg
STANDARD EQUIPMENT
1 collet 6 mm Ø with clamping nut
228.656
1 stopping claw SW 14
254.917
1 open-ended wrench SW 19
104.914
STANDARD EQUIPMENT
1 collet 6 mm Ø with clamping nut
228.656
1 stopping claw SW 14
254.917
1 open-ended wrench SW 19
104.914
ADVANTAGES AT A GLANCE
• FLEX VE electronic control: variable speed and overload protection
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• Clamping collar: 40 mm diameter
ADDITIONALLY FOR H 1105 VE
• Machine length: approx. 330 mm
• Clamping collar length: approx. 53 mm
ADDITIONALLY FOR H 1127 VE
• Machine length: approx. 325 mm
• With long-necked design
For excellent precision
Perfect balance and vibration free running ensure optimal results with the
H 1127 VE.
18
Angle grinders / straight grinders
ADVANTAGES AT A GLANCE
• FLEX Metal composite housing: endurance tested and robust
• Plastic grip cover: for a firm hold at high speeds and extreme torque
ADDITIONALLY FOR H 1212 Z
• Clamping collar: 40 mm diameter
• Machine length: approx. 570 mm
• For collets with 6 mm and 8 mm Ø
H 1212 Z
183.423
H 1206
202.754
High-speed FLEX straight grinder
Grinding, brushing, polishing and deburring are the main tasks for this large speedy FLEX.
It's also quick when it comes to changing tools. All discs and application tools can be changed in a flash.
Low-speed FLEX straight grinder
The big power puts a high torque onto the sanding discs. So that it takes off fast that what should be sanded off. Especially practical: the plastic grip hood for secure handling in any situation.
SPECIFICATIONS H 1212 Z
Max. disc diameter resin/ceramic up to
75 mm
Max. disc diameter fiber reinforced up to 75 mm
Tool fixture
Speed without load
Power input
Power output
Weight
Ø 6, 8 mm
12000 rpm
1600 Watt
1040 Watt
4,5 kg
STANDARD EQUIPMENT
1 collet 6 mm Ø
1 union nut
1 locking claw SW 22
1 open-ended wrench SW 22
141.755
140.368
141.658
109.398
SPECIFICATIONS H 1206
Max. disc diameter resin/ceramic up to
150 mm
Tool fixture
M 20
Speed without load
Power input
Power output
Weight
5700 rpm
1600 Watt
1040 Watt
5,4 kg
STANDARD EQUIPMENT
1 guard
2 clamping discs
1 open-ended wrench SW 22
1 open-ended wrench SW 30/17
1 hex. nut
121.878
110.299
109.398
110.272
110.310
1
19
Quality accessories for angle and straight grinders
1
Velcro system 115 mm to 160 mm Ø for L 3406 VRG
Velcro sanding pad M 14
Dimensions in mm
115 Ø
125 Ø
QP Order number
1 208.817
1 231.983
with rubber cushioning for uniform pressure distribution
Dimensions in mm
115 Ø
QP
1
Order number
240.311
Velcro sand paper
Dimensions in mm
115 Ø
115 Ø
115 Ø
Grit grit 50 grit 80 grit 120
Velcro polishing sponge
For repolishing
Dimensions in mm
120 Ø x 40
Velcro lambswool pad
QP Order number
25 208.833
25 208.868
25 208.884
QP Order number
10 230.596
Sanding pad for LG 1707 FR and LK 604
Flexible sanding pad with clamping nut M 14
Backing pads for fiber grinding discs
Dimensions in mm
170 Ø
Clamping nut M 14
Brush for rust and paint removal for L 3406 VRG,
L 1710 FRA and L 1710 FRC
Steel wire 0,3 mm
Corrugated, mount M 14
Dimensions in mm
60 Ø
Steel wire 0,5 mm
Dimensions in mm
120 Ø
QP Order number
10 230.626
Velcro pad
Soft and pliable for uniform pressure distribution, universal applications for holding polishing accessories, with centering hole and centering tube, adapter M 14
Dimensions in mm
160 Ø
QP
1
Order number
252.583
Velcro sponge, blue (coarse, hard)
Universal sponge with high resistance to tearing. Coarse foam structure for pre-polishing surfaces. Particularly suitable for extremely weathered or dull painted surfaces. Centering hole, inner diameter 22 mm.
Dimensions in mm
160 Ø x 30
QP Order number
1 304.751
Velcro sponge, white (fine, soft)
Fine polishing sponge with high resistance to tearing. For cleaning, polishing and care of lightly-weathered paint surfaces. Centering hole, inner diameter 22 mm.
Dimensions in mm
160 Ø x 30
QP Order number
1 304.786
Knot-type, mount M 14
Dimensions in mm
65 Ø
Straight grinders: collets for H 1105 VE and H 1127 VE
Collet
with clamping nut
Dimensions in mm
3 Ø
1/4" Ø
6 Ø
8 Ø
Straight grinders : collets for H 1212 Z
Dimensions in mm
6 Ø
8 Ø
QP
1
Order number
124.079
QP
1
Order number
124.109
QP
1
Order number
124.516
QP
1
Order number
124.524
1
1
1
1
QP Order number
229.741
229.776
228.656
229.768
1
1
QP Order number
141.755
140.376
QP = Quantity per package
20
Angle grinders / straight grinders
Dimensions in mm
Cutting stones with diamond discs and dust extraction
125 mm cutting guard
with guide block and 32 mm Ø extraction nozzle for cutting discs with 125 mm Ø for flange without groove
125 Ø
230 mm cutting guard
for drawing and pressure cuts with vacuum set and adjustable support, extraction nozzle with
32 mm outer Ø, collar Ø 62 mm, cut depth
65 mm max., for flange without groove
Vacuum hose
32 mm internal Ø, 4,0 m long, temperature resistant to 70°C, incl. coupling adapter for vacuum cleaner and 32/28 mm adapter
230 Ø
Quick-clamp nut
FixTec quick clamp nut M 14
for tool-free tool changes, approved for discs up to 150 mm Ø
SDS-Clic quick-clamp nut
Side handles
SoftVib side handle with pin wrench
The elastic SoftVib side handle is isolated from the machine housing by damping elements and this reduces vibration noticeably. This is easy on the operator's wrists, which leads to better comfort and faster progress while working. With built-in face pin wrench for exchanging the discs quickly without additional tools.
SoftVib side handle
The elastic SoftVib side handle is isolated from the machine housing by damping elements and this reduces vibration noticeably. This is easy on the operator's wrists, which leads to better comfort and faster progress while working.
Carrying case
Small metal carrying case
for all angle grinders with disc Ø up to 125 mm
Plastic Multi-Carry case
Perfect fitting, impact resistant carry case, universally adaptable for many different FLEX-Maschines
QP Order number
1 254.797
– – ■ – – – – –
1
1 252.963
– – – –
■
–
■
–
1 259.630
– –
■
–
■
–
■
–
1 313.459
■ ■ ■
– – – – –
1 253.049
■ ■ ■ ■ ■ ■ ■ ■
1 316.857
■ ■ ■ ■ – – – –
1 325.376
– – – – ■ ■ ■ ■
1 303.224
■ ■ ■ – – – – –
1 329.908
– – – –
■ ■ ■ ■
21
Brilliant for sanding and polishing:
The FLEX surface program
22
Surface finishing
Do you need something for the perfect finish of sensitive surfaces?
2
regardless whether surface or curve, whether angle or corner: the FleX surface program is always the right choice. your work shines everywhere. to make the job easier, the machines and accessories are also bundled as practical Pro kits in the FleX toolboxes.
simply unpack and start working!
23
Application examples: surface finishing
2
adaPting to any contour even difficult to reach places on welded pipe constructions can be worked on with the pre-profiled sanding discs.
Fillet weld grinder llK 1503 Vr
on page 30
Polish and sand PiPes much more quicKly with the sanding Boa when applied the flexible sanding arm wraps itself around the pipe like a snake
– up to a radius of 270°. sanding boa lrP 1503 Vra
on page 29
24 this rounds it oFF rubber drive roller and polishing fleece mirror-finish stainless steel guard-rails.
Burnishing machine lP 1503 Vr ProFi kit
on page 26
Burnish with ease with the ruBBer air roller the air cushion adapts to any material contour.
Burnishing machine lP 1503 Vr ProFi kit
on page 26 the sPecialist For larger
PiPe diameters the sanding belt nestles itself to any curve – up to 250 mm diameter. weld seam and pipe belt sander lBr 1506 Vra
on page 28
Surface finishing
PerFect For sanding weld seams the circulating belt carries off the heat. that is how weld seams can be sanded down on stainless steel without tempering. weld seam and pipe belt sander lBr 1506 Vra
on page 28 staBle FleX toolBoXes
KeeP eVerything tidy everything in order and in the right place – ProFi kits with machine, sanding discs, and accessories
starting page 26
Flounder instead oF strenuous manual laBour even when things get tight, the flounder can reach in everywhere – under heaters too.
Flat head grinder Flounder ll 1107 Vea
on page 37
For working on metal and stainless steel:
Weld seams and points are sanded in linear direction on stainless steel, steel, and aluminium nearly to concision using grit sizes 60 to 100. grit sizes 120 to 180 are used for smoothing. For the decorative finish a polishing fleece or fleece belt is used. Fineness as required (matte: polishing fleece 100/120 or 180/240, fleece belt medium fabric. shining bright: polishing fleece 400, fleece belt fine fabric).
For scratches in stainless steel and nonferrous metal: the deeper they are, the rougher the grit with which you start. then gradually proceed to finer grit. use polishing fleece or fleece belts for the finish as described above.
For the mirror-finish polish „on stainless steel and nonferrous metal you also proceed gradually from rough grit to finer grit. Pre-polishing is then done using a cotton buffer or a felt belt and pre-polishing paste „„white“„. mirror finish is provided by repolishing paste „„blue“„.
Perfection is attained using finishing cream in the last step (applied manually, then polished). important: use a separate set of buffers / felt belts for each paste (dirt particles!).“
FLEX abrasive accessories do not contain any iron or sulphur additives and are especially suited for processing stainless steel. abrasive grain, carrier material, bonding material, and coatings of the high-quality sanding discs meet the highest requirements for grinding performance, quality, and operating efficiency.
FLEX accessories and abrasive acccessories starting page 31
25
2
Metal surface finishing
2
LP 1503 VR
PROFI-Set
319.015
ADVANTAGES AT A GLANCE
• FLEX four-fold full-wave electronic control: with consistent speed control by tachometer generator, soft start, overload protection and speed pre-selection
• Adjustable guard: for sanding tools up to Ø 115 mm
• Sanding tool replacement: tool-free
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• 4 m power cord: with FLEX red plug
The FLEX burnishing machine for highly polished surfaces in the PRO kit
Shadow-free and transition-free metal, wood, or plastic surfaces are its specialty. Its extensive FLEX accessories make it ideal for satinfinishing, polishing, descaling, smoothing, matting, structuring, brush polishing, and deburring. Start right up with the PROFI kit in the toolboxes; everything is on hand.
Machine without standard equipment:
Order no. 244.333
SPECIFICATIONS LP 1503 VR PROFI-SET
Power input
1200 Watt
Power output
Max. tool Ø
Tool width
Tool fixture
Speed without load
Weight
700 Watt
115 mm
100 mm
19 mm
1200-3700 rpm
3,1 kg
Practical PRO kit
Everything needed for universal application of the burnishing machine is clearly arranged in the case. Beyond that it provides sufficient room for additional accessories.
STANDARD EQUIPMENT
1 air pump
1 rubber air roller
1 drive roller
1 kit of distance rings
1 fleece grit 280/320
1 sanding sleeve, grit 60
1 sanding sleeve, grit 100
1 sanding sleeve, grit 180
1 fleece sanding sleeve, red
256.284
256.415
255.731
250.522
256.975
1 piece of 256.285
1 piece of 256.286
1 piece of 256.287
256.289
1 fleece sanding sleeve, blue
256.290
1 sanding-polishing sleeve, grit 600
318.175
1 sanding-polishing sleeve, grit 1500
2 Velcro drive belts
1 Velcro fleece belt A 180
318.183
281.050
1 piece of 281.077
2 Velcro sanding belts, grit 120
1 Velcro polishing belt, grit 1500
1 plastic carrying case with padding
2 pieces of 284.726
1 piece of 318.736
319.066
26
Surface finishing
ADVANTAGES AT A GLANCE
• FLEX VE electronic control: for infinitely-adjustable belt speed
• Sanding head: rotates by 140°
• Quick belt replacement system: for quick, tool-free belt replacement
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• 4 m power cord: with FLEX red plug
LBS 1105 VE
PROFI-Set
319.007
Swivelling sanding head
The sanding head can be swivelled by
140°. No matter how winding the steps are - they are polished off.
Start up immediately
The FLEX belt filing machine with two sanding arms complete in the PRO kit.
There is room in the case also for a
ST 1005 VE including accessories.
The FLEX belt filing machine ready to go in the PRO kit
Equipped with the two 9 mm and 30 mm arms, mounted on the sanding head that rotates 140°, the flexible file can reach into corners, grooves, and folds, is also suited for pipes and curves. Both sanding arms are included in the PROFI kit, as well as extensive accessories in the practical plastic carrying case. Everything's there; nothing's missing. Ready - set - sand! Machine with 9-mm arm: Order no. 270.113
SPECIFICATIONS LBS 1105 VE PROFI-SET
Power input
710 Watt
Power output
Belt speed
Belt dimensions
Weight
420 Watt
4-12 m/sec
520/533 x 4-30 mm
2,5 kg
STANDARD EQUIPMENT
1 sanding arm, pointed, 9 mm
256.525
1 sanding arm, with big roll, 30 mm 258.888
2 sanding belts, grit 60, 4 mm
2 pieces of 303.615
2 sanding belts, grit 120, 4 mm
2 sanding belts, grit 60, 9 mm
2 sanding belts, grit 120, 9 mm
2 sanding belts, grit 60, 30 mm
2 pieces of 303.623
2 pieces of 257.105
2 pieces of 257.102
2 pieces of 255.328
2 sanding belts, grit 120, 30 mm
2 pieces of 255.329
1 sanding fleece medium, 9 mm
1 piece of 318.663
1 sanding fleece medium, 30 mm
1 piece of 318.647
1 side handle
194.034
1 hexagon socket screw key, special tool 5
115.460
1 plastic carrying case with padding 319.074
27
2
Metal surface finishing
2
LBR 1506 VRA
282.499
ST 1005 VE
259.540
The combination weld and pipe belt sander
Welds on flat surfaces are removed by the versatile belt sander without leaving any edges or wavy finish. The application pressure acts directly on the drive roller. The sanding belt also follows every contour closely when sanding pipes, so that even stainless steel can be given a high-gloss finish.
The specialized FLEX for inside corners and edges
Because of the linear movement of the tilted sanding pad the finger sander can reach into corners and edges. Depending on the grit of the sandpaper this opens up a broad range of applications up to the perfect finish of stainless steel.
SPECIFICATIONS
Power input
Power output
Belt speed
Belt dimensions
Weight
LBR 1506 VRA
1200 Watt
700 Watt
10-30 m/sec
40 x 618 mm
4,2 kg
SPECIFICATIONS
Power input
Power output
Sanding medium
Orbit
Orbit rate, without load
Weight
ST 1005 VE
400 Watt
220 Watt
39 x 60 mm
8 mm
1200-4500 rpm
2,2 kg
STANDARD EQUIPMENT
1 side handle
1 bail handle
252.721
259.290
1 sanding belt, continuous, grit 60
1 piece of 223.689
1 sanding belt, continuous, grit 120 1 piece of 266.132
1 sanding belt, continuous, grit 240 1 piece of 250.610
1 sanding fleece 618 x 40 medium
1 piece of 317.977
1 hexagon socket screw key, special tool 5
115.460
1 hexagon socket screw key, special tool 6
1 hexagon socket screw key, special tool 3
104.167
178.772
STANDARD EQUIPMENT
2 polishing shoes with Velcro polishing cushion
10 Velcro sand paper grit 60
10 Velcro sand paper grit 120
10 Velcro sand paper grit 180
10 Velcro fleece 39 x 60 medium
1 hexagon socket screw key, special tool 3
1 set
258.299
258.300
258.301
258.302
217.794
ADVANTAGES AT A GLANCE
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• 4 m power cord: with FLEX red plug
ADDITIONALLY FOR LBR 1506 VRA
• FLEX four-fold full-wave electronic control: with consistent speed control by tachometer generator, soft start, overload protection and speed preselection
• Sanding belt tension: spring loaded, adapts to pipe diameter from 10 to
250 mm
• Sanding belt replacement: quick and easy
• Light design: for work without fatigue
• Sanding belts: wide assortment included sanding fleece for stainless steel applications
ADDITIONALLY FOR ST 1005 VE
• FLEX VE electronic control: for infinitely-adjustable stroke speed control
• Free view of the tool
• 2 polishing shoes with Velcro polishing cushion 39 x 60 mm
28
Surface finishing
The sanding boa as complete kit
The extensive accessories are included as standard with the LRP 1503 VRA.
sanding belt
ADVANTAGES AT A GLANCE
• FLEX four-fold full-wave electronic control: with consistent speed control by tachometer generator, soft start, overload protection and speed preselection
• Sanding belt replacement: quick and tool-free
• High-quality 270° sanding arm: light alloy with 2 deflection rollers. Quicker progress, perfect finish, simple operation
• Additional side handle: can be rotated
180°, for narrow places
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• 4 m power cord: with FLEX red plug
• Plastic carrying case: everything where you want it, when you want it. Standard design with extensive accessories pipe guide pulley drive roll
Polishing and sanding pipes
The FLEX sanding boa sands and polishes radii of up to 270°.
LRP 1503 VRA
324.442
The FLEX Boa sander: the all-round polishing solution
The perfect solution for sanding and polishing pipe constructions. The sanding arm wraps itself around the pipe like a snake when pressure is applied, tackling radii up to
270°. Spring resistance between the deflection rollers means that the sanding arm and sanding belt are always uniformly pretensioned. The Boa needs only be be rotated slightly to continue treatment and achieve the perfect finish. In tight places - e.g.
handrails that are fixed close to walls - the additional handle can be rotated 180°.
SPECIFICATIONS
Power input
Power output
Belt speed
Belt dimensions
Pipe Ø max.
Weight
LRP 1503 VRA
1200 Watt
700 Watt
4-12 m/sec
760 x 40/20 mm
125 mm
3,7 kg
STANDARD EQUIPMENT
1 sanding belt, continuous, grit 80, 760 x 40 mm
1 piece of 326.739
1 sanding belt, continuous, grit 120, 760 x 20 mm
1 sanding belt, continuous, grit 220, 760 x 20 mm
1 piece of 326.801
1 piece of 326.836
1 sanding fleece, continuous, fine, 760 x 40 mm
1 sanding fleece, continuous, medium, 760 x 40 mm
1 piece of 326.852
1 piece of 326.879
1 sanding-polishing belt, continuous, grit 600, 760 x 40 mm
326.917
1 sanding-polishing belt, continuous, grit 1500, 760 x 40 mm 326.933
1 plastic carrying case with padding 327.603
29
2
Metal surface finishing
2
LLK 1503 VR
315.257
The fillet weld grinder for smooth transitions in tight spots
When weld seam and pipe belt sanders have reached their limits, then it is time for a fillet weld grinder. Its extremely narrow grinding head and flexible FLEX sanding discs can reach most any hard-to-get-at weld seam. For the perfect surface finish on railings, pipe constructions, and other tight spots.
SPECIFICATIONS
Power input
Power output
Max. disc diameter
Speed without load
Weight
LLK 1503 VR
1200 Watt
700 Watt
152 mm
1500-4700 rpm
3,4 kg
STANDARD EQUIPMENT
1 profiling stone
1 FixTec quick-clamp nut M 14
1 compact grinding disc, 3 mm, soft
315.494
313.459
313.416
1 compact grinding disc, 3 mm, hard
313.424
1 compact grinding disc, 6 mm, soft
313.432
1 compact grinding disc, 6 mm, hard
313.440
1 plastic carrying case with padding
319.082
ADVANTAGES AT A GLANCE
• 1200 Watt high-power motor: ideal for flexible grinding and polishing of metals and stainless steel to suit the material
• FLEX four-fold full-wave electronics: with speed selection and consistent speed control, soft start, overload protection.
• Slim grinding head: sand and polish with power and ease in tight angles
• FLEX quality sanding discs: mage of compressed fleece-fibre nylon
• Profiling stone: for pre-profiling the sanding discs
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• 4 m power cord: with FLEX red plug
• Heavy-duty carrying case
Sanding with individualised profiles
The standard profiling stone can preprofile the sanding disc.
Everything included
Fillet weld grinder, sanding discs, and profiling stone in the practical FLEX case.
30
Surface finishing
Sanding fleece flap
Accessories for the LP 1503 VR finishing machine for metal and stainless steel
Poli-clean
Hard-structured fleece wheel. For cleaning welds and intensive, pore-deep removal of rust and oxidation layers. Also creates particularly decorative longitudinal finishes on stainless steel.
QP Dimensions in mm
100 Ø x 100 1
Order number
257.375
Flexible combination of sanding flap and sanding fleece. Two wheels are required (for 50 wide). Suitable for dulling and finishing. Removes small scratches on metal, hard plastics and wood.
Dimensions in mm
100 Ø x 50
Grit grit 80/100
100 Ø x 50 grit 150/180
100 Ø x 100 grit 80/100
100 Ø x 100 grit 150/180
1
1
1
QP Order number
1
250.515
250.516
256.977
256.978
2
Nylon brushes
Flap wheel sanding
Flexible sanding wheel with individual flexible flap-type sanding lamellae and keyway. 2 wheels are required. For paint removal, sanding and strong graining applications. Removes scratches, rust, old paint, scale and burrs. The 40 grit employed enables the removal of even deep scratches on stainless steel.
Grit QP Dimensions in mm
100 Ø x 50
100 Ø x 50
100 Ø x 50
100 Ø x 50
100 Ø x 50
100 Ø x 50
100 Ø x 50 grit 40 grit 50 grit 60 grit 80 grit 120 grit 180 grit 240
1
1
1
1
1
1
1
Order number
250.496
250.497
250.498
250.499
250.501
250.504
250.505
Impregnated with sanding grits. Flexible, interspersed plastic brushes. For deburring, cleaning, roughing and smoothing. (Also suitable for wood, brushing applications and removing fibres.)
Needed is one piece plus distance ring set (order no. 250.522).
Dimensions in mm
100 Ø x 70
QP
1
Order number
251.624
Stainless steel wire brush
Flexible stainless steel wire brush. Rust removal, deburring, roughing and paint removal. Needed is one piece plus distance ring set
(Order no. 250.522).
Dimensions in mm
100 Ø x 70
QP
1
Order number
251.625
Sanding fleece
Flexible polishing wheel made of sanding grit-impregnated nylon web with a keyway. Two wheels are required (for 50 mm wide fleece only). Achieves effective surface finishes on stainless steel, copper, aluminum, brass, etc. Also ideal for cleaning oxidized coatings and smoothing plastic and wood.
Grit QP Dimensions in mm
100 Ø x 50
100 Ø x 50
100 Ø x 50
100 Ø x 50
100 Ø x 100
100 Ø x 100
100 Ø x 100
100 Ø x 100 grit 80/100 grit 180 grit 280/320 grit 400 grit 80/100 grit 180 grit 280/320 grit 400
1
1
1
1
1
1
1
1
Order number
250.509
250.510
250.512
250.513
256.973
256.974
256.975
256.976
Stranded wire brushes
Fine sanding roller
Made of strong, twisted, gold-colored steel wire. Extremely tough and rigid. For rust removal, deburring, removing dirt and old paint.
Brings up the grain structure in wood. Needed is one piece plus distance ring set (order no. 250.522).
Dimensions in mm
100 Ø x 70
QP
1
Order number
251.626
Soft rubber polishing wheel made of grit-impregnated rubber web.
2 rollers are required. For particularly bright longitudinal structures.
Best effects are achieved on stainless steel.
Grit Dimensions in mm
100 Ø x 50
100 Ø x 50 grit 60 grit 180
QP Order number
1 250.525
1 250.526
QP = Quantity per package
31
Quality accessories surface finishing metal
Accessories for the LP 1503 VR finishing machine for metal and stainless steel
Polishing fleece
Air pump
For pumping up rubber air rollers
QP
1
Order number
256.284
Soft, flexible fleece polishing wheel. Two wheels are required. For high-gloss polishing when using polishing pastes and creams.
Sanding-polishing sleeve
2
Dimensions in mm
100 Ø x 50
Cotton buffing wheel
QP Order number
1 257.374
For high-gloss polishing without polishing agents in two steps
Dimensions in mm
90 Ø x 100
90 Ø x 100
Grit grit 600 grit 1500
QP
1
1
Order number
318.175
318.183
Distance ring set
Polishing ring made of impregnated cotton cloth. Achieves a highgloss polished finish on aluminum, brass and stainless steel.
Needed are 8 pieces plus distance ring set (order no. 250.522).
Dimensions in mm
100 Ø x 10
QP
8
Order number
317.950
Zirconium corundum sanding sleeves
For coarse and medium sanding
Dimensions in mm
90 Ø x 100
90 Ø x 100
90 Ø x 100
Grit grit 60 blue grit 100 grey grit 180 brown
5
5
5
QP Order number
256.285
256.286
256.287
Rubber air roller
Required for nylon brushes, stainless steel wire brushes, stranded wire brushes, cotton buffing wheels. Also necessary for sanding flaps, sanding fleeces, sanding fleece flaps, fine sanding rollers and sanding wheels less than 100 mm wide if only one sanding wheel is to be mounted.
QP Order number
8 250.522
Fleece sanding sleeves
For decorative finishes
Dimensions in mm
90 Ø x 100
90 Ø x 100
90 Ø x 100
Grit grit 100/120 brown grit 180/240 red grit 400 blue
High-gloss range
consisting of: 1 felt polishing belt, 40 x 618 mm: 255.003; 1 Pre-polishing paste, white,
700 g: 255.004; 1 Repolishing paste blue, 700 g: 255.005; 1 Finishing cream, 1000 g:
255.006; 1 VA preservative, 400 ml: 255.007.
For high-gloss effects, particularly with stainless steel and for sealing surfaces.
QP Order number
1 set 255.002
Drive roller
For sanding belt drive
Dimensions in mm
60 Ø x 100
QP
1
Order number
255.731
With stainless steel guide discs. Needed is the distance ring set
(Order no. 250.522).
QP Dimensions in mm
62 Ø x 70 1
Order number
303.054
For sensitive contour sanding
Dimensions in mm
90 Ø x 100
QP Order number
1 256.415
With air pump and ring fastener. For sensitive contour sanding
Dimensions in mm
90 Ø x 100
QP
1
Order number
257.004
1
1
1
QP Order number
256.288
256.289
256.290
32
QP = Quantity per package
Surface finishing
Belts without Velcro seal for LP 1503 VR /
LBR 1506 VRA
Sanding belt, continuous
Belts with hook and loop attachment for burnishing machine LP 1503 VR
Velcro sanding belt
For polishing pipes and pipe fittings
Dimensions in mm
618 x 40
618 x 40
618 x 40
618 x 40
Grit grit 36 grit 60 grit 120 grit 240
QP
10
10
10
10
Order number
223.670
223.689
266.132
250.610
For polishing pipes and pipe fittings
Dimensions in mm
600 x 40
600 x 40
Grit grit 60 grit 120
QP Order number
10 284.718
10 284.726
Velcro fleece
Sanding fleece, continuous
For polishing pipes and pipe fittings
Dimensions in mm
618 x 40
618 x 40
618 x 40
Grit grit 100 grit 240 grit 400
3
3
3
QP Order number
317.969
317.977
317.985
For polishing pipes and pipe fittings
Dimensions in mm
600 x 40
600 x 40
600 x 40
Grit
A 100
A 180
S 400
2
2
QP Order number
281.069
281.077
2 281.085
Velcro polishing belt
Felt belt
For polishing stainless steel surfaces
Dimensions in mm
618 x 40
QP
1
Order number
255.003
For high-gloss polishing of stainless steel
Dimensions in mm
600 x 40
Grit
S 1500
QP Order number
2 318.736
Adhesive tape for sanding belt
For sealing open sanding belts for the LP 1503 VR
Dimensions in mm
40 x 5000
QP
1
Order number
251.838
Velcro drive belt, blue
For closing and releasing the different belts. Simple application tensile resistance up to 100 kg
Dimensions in mm
700 x 30
QP
2
Order number
281.050
2
33
Quality accessories surface finishing metal
Accessories for the LBS 1105 VE finger belt sander
2
Sanding arm, 9 mm, pointed
for extremely tight spaces. Application cases: Sanding wedge seams
(small radius), sanding down corrosion spots, smoothen tight contours, deburring edges, sanding banisters, sanding groove gaps for tongue-and-groove boards
Dimensions in mm
9
QP
1
Order number
256.525
Sanding arm, 9 mm, cambered
Sanding belt, 30 mm
continuous, for 30 mm sanding arm
Dimensions in mm
533 x 30
533 x 30
533 x 30
533 x 30
Grit grit 40 grit 60 grit 120 grit 220
Sanding fleece, 9 mm
For angles and tight spaces. Application cases: Sanding wedge seams (large radius), deburring edges, sanding banisters, sanding groove gaps for tongue-and-groove boards
Dimensions in mm
9
QP
1
Order number
256.532
Sanding arm, 30 mm, small roller
continuous, for 9 mm sanding arm
Dimensions in mm
533 x 9
533 x 9
Grit grit 240 medium grit 400 fine
Sanding fleece, 30 mm
For edges and surfaces. Application cases: Sanding butt seam welds, deburring edges, sanding surfaces, removing rust
Dimensions in mm
30
QP
1
Order number
255.282
Sanding arm, 30 mm, large roller
continuous, for 30 mm sanding arm
Dimensions in mm
533 x 30
533 x 30
Grit grit 240 medium grit 400 fine
QP Order number
10 256.538
10 255.328
10 255.329
10 255.330
3
3
QP Order number
318.663
318.671
3
3
QP Order number
318.647
318.655
For pipes and curves. Application cases: Sanding weld seams on pipes, sanding down radii and transitions, deburring
Dimensions in mm
30
QP
1
Order number
258.888
Sanding belt, 4 mm
Sanding-polishing belt, continuous
For high-gloss polishing without polishing agents in two steps
Dimensions in mm
533 x 30
533 x 30
Grit grit 600 grit 1500
QP
1
1
Order number
318.132
318.140
continuous, for 9 mm sanding arm
Dimensions in mm
533 x 4
533 x 4
533 x 4
533 x 4
Grit grit 40 grit 60 grit 120 grit 220
Sanding belt, 9 mm
QP Order number
10 303.607
10 303.615
10 303.623
10 303.631
Felt belt, 9 mm
For polishing stainless steel surfaces
Dimensions in mm
533 x 9
QP
1
Order number
259.420
Felt belt, 30 mm
continuous, for 9 mm sanding arm
Dimensions in mm
533 x 9
533 x 9
533 x 9
533 x 9
Grit grit 40 grit 60 grit 120 grit 220
QP Order number
10 257.101
10 257.105
10 257.102
10 257.103
For polishing stainless steel surfaces
Dimensions in mm
533 x 30
QP
1
Order number
259.419
34
QP = Quantity per package
Surface finishing
Dimensions in mm
39 x 60
39 x 60
39 x 60
Velcro sanding fleece
Grit grit 60 grit 120 grit 180
Sanding-polishing belt, continuous
Accessories for the ST 1005 VE finger belt sander
Velcro sand paper
QP
10
10
10
Order number
258.299
258.300
258.301
INOX Clean spray
For high-gloss polishing without polishing agents in two steps
Dimensions in mm
760 x 40
760 x 40
Grit grit 600 grit 1500
QP Order
1
1 number
326.917
326.933
To seal the surface, 400 ml tin
Dimensions in mm
39 x 60
Grit grit 240
QP
10
Order number
258.302
QP Order number
1 298.301
2
Polishing shoe, slanted
with Velcro polishing cushion
Polishing shoe, pointed
with Velcro backing
QP
1
Order number
258.031
QP
1
Order number
255.265
Accessories for filled weld grinder LLK 1503 VR
Compact grinding disc
Professional sanding discs: hot-compressed compact sanding discs for stainless steel, metal, and other materials in 2 different thicknesses and hardnesses: the hard sanding disc is used for sanding, the soft one for polishing.
Dimensions in mm
Grit
152 x 3 x 25 soft
152 x 3 x 25 hard
152 x 6 x 25 soft
152 x 6 x 25 hard
1
1
1
QP Order number
1
313.416
313.424
313.432
313.440
Accessories for Boa sander LRP 1503 VRA
Sanding belt, continuous
For polishing pipes and pipe fittings
Dimensions in mm
760 x 40
760 x 40
760 x 40
760 x 20
760 x 20
Grit grit 80 grit 120 grit 220 grit 120 grit 220
Sanding fleece, continuous
For polishing pipes and pipe fittings
Dimensions in mm
760 x 40
760 x 40
760 x 40
Grit fine medium coarse
Profiling stone
for pre-profiling the compact sanding discs
QP Order number
1 315.494
QP
10
10
10
10
10
Order number
326.739
326.755
326.771
326.801
326.836
FixTec quick clamp nut M 14
for tool-free tool changes, approved for discs up to 150 mm Ø
QP Order number
1 313.459
3
3
3
QP Order number
326.852
326.879
326.895
35
Universal surface finishing
2
XS 713
334.111
New
MS 713
332.380
New
The new handy FLEX rotating-orbital sander
With higher stroke rate and shorter strokes this handy sized machine with its ergonomic grip achieves an evenly smooth surface. The machines low profile allows for extremely sensative sanding close the work surface.
The new FLEX mini sander is slender and ergonomically designed
This compact and lightweight mini sander is the ideal complement to surface finishing, especially fine work. The universal application underlines the versatility of this machine. The sanding paper is fixed to the square backing pad by either Velcro or clamp fasteners.
SPECIFICATIONS
Power input
Power output
Orbit rate, without load
Orbit
Sand paper
Sanding media fixing
Weight
XS 713
230 Watt
75 Watt
12000 rpm
1,6 mm
Ø 125 mm hook and loop
1,3 kg
SPECIFICATIONS
Power input
Power output
Orbit rate, without load
Orbit
Sand paper
Sanding media fixing
Weight
MS 713
220 Watt
120 Watt
14000 rpm
1,6 mm
115 x 105 mm hook and loop / clamp
1,2 kg
STANDARD EQUIPMENT
1 Velcro sand paper, with 8 perforations
1 piece
1 dust bag
1 adapter for dust extractor
332.992
333.026
STANDARD EQUIPMENT
1 paper punch
1 dust bag
1 adapter for dust extractor
1 piece
332.992
333.026
ADVANTAGES AT A GLANCE
• Anti-slip rubber covered grip, for vibration reduced and tireless working
• Dust-proof on/off switch
• Possible to connect external dust extractor using the supplied as standard adapter
ADDITIONALLY FOR MS 713
• Aluminium sanding support plate
• Rubber support bearing: extremely low vibration and easy to guide
36
Surface finishing
ADVANTAGES AT A GLANCE
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
ADDITIONALLY FOR X 1107 VE
• FLEX VE electronic control: with infinitely-adjustable speed control
• Vacuum fitting: for connecting to vacuum cleaner, diameter 28 mm
ADDITIONALLY FOR F 1109
• 4 HSS reversible cutters: the cutters can be reversed four times, and that saves money
• Cutting head: 80 mm diameter, M 14 tool fixture
• Metal carrying case: rugged carrying case included with room for replacement cutters and tool
X 1107 VE
218.669
F 1109
251.338
Everything under cover
True to dimension grooves for fitting in gutter support are cut out in a flash with this FLEX.
The powerful FLEX orbital sander with dust collection
The powerful all-round sander with variable speed control for coarse and fine wood finishing, painted metal surfaces and automobile body work. The extremely high sanding orbit of 8,8 mm ensures quick yet fine sanding. A grip cover means that the sander always feels good to hold.
The FLEX gutter support groove cutter with directed shaving removal
Gutter supports can be fitted quickly and cleanly, thanks to the practical cutter. 6 to 8 mm deep and 40 mm wide grooves are cut in a flash. The cutting guide ensures that the shavings produced are blown out in the right direction and are no longer scattered all over the roof.
SPECIFICATIONS
Power input
Power output
Orbit
Orbit rate, without load
Max. disc diameter
Sanding media fixing
Weight
STANDARD EQUIPMENT
1 side handle
Velcro sand paper, with
6 perforations, grit 40, 150 Ø
Velcro sand paper, with
6 perforations, grit 80, 150 Ø
Velcro sand paper, with
6 perforations, grit 120, 150 Ø
Velcro sand paper, with
6 perforations, grit 180, 150 Ø
Velcro sand paper, with
6 perforations, grit 320, 150 Ø
1 open-ended wrench SW 14
1 hexagon socket screw key, special tool 4
1 grip cover
1 Velcro pad (hard) 150 Ø
X 1107 VE
710 Watt
420 Watt
8,8 mm
4300-13000 rpm
150 mm hook and loop
2,7 kg
SPECIFICATIONS
Power input
Power output
Speed without load
Planer width
Planer depth
No. of cutters
Weight
194.034
1 piece of 302.988
1 piece of 302.996
1 piece of 303.003
STANDARD EQUIPMENT
1 set HHS reversible cutters (4 pieces)
1 metal carrying case
1 torx wrench
1 open-ended wrench SW 30/17
241.091
256.519
258.861
106.461
1 piece of 303.011
1 piece of 303.038
100.102
102.229
239.771
228.176
F 1109
710 Watt
420 Watt
10000 rpm
40 mm
6 / 8 mm
4 pieces
3,9 kg
37
2
Universal surface finishing
2
LL 1107 VEA
289.434
The FLEX Flounder, when things get tight
The Flounder is in its element wherever narrow intermediate spaces need sanding. The extremely flat grinding head can access slits with a gap width of only 15 mm or more. This saves strenuous work and troublesome caustic removal on shutters, balcony panels and floors under heating radiators.
SPECIFICATIONS
Power input
Power output
Speed without load
Max. disc diameter
Sanding head level
Weight
LL 1107 VEA
710 Watt
420 Watt
700-2300 rpm
115 mm
13 mm
2,7 kg
STANDARD EQUIPMENT
1 side handle
Sandpaper grit 50, 115 Ø
Sand paper grit 80, 115 Ø
Sand paper grit 120, 115 Ø
1 Velcro velours with foam coating 80 mm Ø
194.034
1 piece of 208.833
1 piece of 208.868
1 piece of 208.884
296.155
ADVANTAGES AT A GLANCE
• FLEX VE electronic control: with infinitely-adjustable speed control
• Foam coating under gearbox housing: prevents scratching of already treated surfaces
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• Special accessory: metal carrying case
(order no. 303.224)
38
Surface finishing
Velcro sand paper
Accessories for the XS 713 orbital sander
Velcro sanding pad
with 8 perforations
Dimensions in mm
125 Ø
QP
1
Order number
334.146
With 6 perforations. Main application: wood. Other applications: steel, stainless steel, plastic, paint/varnish/fillers
Grit Dimensions in mm
150 Ø
150 Ø
150 Ø
150 Ø
150 Ø grit 40 grit 80 grit 120 grit 180 grit 320
QP Order number
10 302.988
10 302.996
10 303.003
10 303.011
10 303.038
2
Velcro sand paper
with 8 perforations
Dimensions in mm
125 Ø
125 Ø
125 Ø
125 Ø
125 Ø
125 Ø
125 Ø
Grit grit 40 grit 60 grit 80 grit 100 grit 120 grit 180 grit 220
Accessories for the MS 713 finishing sander
Velcro sand paper, square
Accessories for gutter support groove cutter F 1109
QP
25
25
25
25
25
25
25
Order number
334.308
334.324
334.340
318.027
317.993
318.000
318.019
Reversing blade
HM reversing blade
Dimensions in mm
21 x 21
HSS reversing blade
Dimensions in mm
21 x 21
QP Order number
4 229.555
QP Order number
4 241.091
Accessories for the LL 1107 VEA Flounder
with 8 perforations
Dimensions in mm
115 x 105
115 x 105
115 x 105
115 x 105
115 x 105
115 x 105
115 x 105
Grit grit 40 grit 60 grit 80 grit 100 grit 120 grit 180 grit 220
25
25
25
25
25
25
25
QP Order number
334.251
334.286
332.771
332.798
332.801
332.828
332.836
Velcro sand paper
Dimensions in mm
115 Ø
115 Ø
115 Ø
Grit grit 50 grit 80 grit 120
QP Order number
25 208.833
25 208.868
25 208.884
Velcro velour
Accessories for the X 1107 VE orbital sander
Velcro sanding pad
with 6 perforations
Dimensions in mm
150 Ø
150 Ø
Grit hard soft
with foam coating
Dimensions in mm
80 Ø
1
1
QP Order number
228.176
228.184
Small metal carrying case
for all angle grinders with disc Ø up to 125 mm
QP Order number
1 296.155
QP Order number
1 303.224
QP = Quantity per package
39
Brilliant job:
The FLEX polisher for highly sensitive surfaces
40
Polishers
Reflecting automotive lacquers?
Perfect furniture surfaces?
FLEX puts customised solutions in your hand for that optimal finish.
Take a FLEX polisher:
Its motor windings and gears have been designed especially for low speeds and high torques. Because of generous power reserves and electronics with overload protection it can also sustain high loads. Thanks to speed selection and accelerator trigger switch it seamlessly covers the low speed range. And with its ergonomic handle system it is fully tuned to careful working.
Add to that polishing accessories of FLEX: For example the FLEX sponges. Rip-proof, solvent-resistant, and with a heat-stable hook and loop attachment. Since nothing is cemented, no toxic fumes will develop. Just as valuable are the FLEX lambs wool, fleece, polishing kits, and much more.
Let it shine!
3
41
Application examples: polishers
3
42
BuFFER And poLISh
LAcquEREd FuRnITuRE
For toughest non-stop operation during brushing, polishing, and buffering wood and stainless steel. polisher L 1202
on page 47
IS gEnTLE on
TEmpERATuRE-SEnSITIVE
FInIShES due to the orbital rotation movement of the Xc 3401 VRg, very little heat develops on the surface. orbital polisher
Xc 3401 VRg
on page 46
ThE LoW-SpEEd FLEX FoR hIghLy SEnSITIVE SuRFAcES
With extremely low speed and high torque it is ideal for acrylic paints, corian, gFRp, glass, stone, and water- soluble paints. polisher L 1501 VR
on page 47
STRong on poLIShIng
SuRFAcES
Thanks to the handles that are spaced wide apart the light-weight polisher can be guided with special care and precision even over large surfaces. polisher L 3403 VRg
on page 45
WELL hAndLEd In Any poSITIon
For everyone who needs to polish over sensitive surfaces with special precision and care. polisher L 602 VR with bail handle
on page 44
Polishers
unpAck mAchInE
And START WoRkIng made possible by the extensive standard equipment. polisher L 3403 VRg as complete kit
on page 45
For a professional polish:
Water-soluble, ecological automotive paints should be processed with little force, but rather at low speed and gentle pressure. That prevents the heating up of the polishing medium and too much paint abrasion. FLEX sponges and appropriate quality polishing media ensure the proper treatment to suit the material (observe the recommended speeds / metallic enamels require special polishing media).
FLEX recommendations:
• Single-coated lacquering (without clear coat varnish):
2200 to 2800 rpm with blue or yellow FLEX polishing
• sponges double-coated lacquering (without clear coat varnish):
•
1200 to 1700 rpm with white FLEX polishing sponges processing beads and curves as well as repolishing: with black FLEX Velcro sponges
For a perfect finish always work on one section of the vehicle at a time (engine bonnet, boot, etc.). do not circulate, but rather polish the surfaces length- and cross-wise. mechanically remove polishing medium residues with a slightly moistened lamb or wool fleece.
To conserve the enamel wax can be applied (soft Velcro sponge). This deepens the sheen of the enamel especially for black cars. After absorption and drying, polish down with lamb and wool fleece.
Important: use a separate sponge for each polishing medium and colour!
FLEX polishing accessories starting page 48
STAndARd In
ALL poLIShER kITS microfibre cloth for perfect surface finish and brilliant deep sheen. polisher kits
starting page 44
3
43
Polishing machines
L 602 VR
329.800
L 602 VR-Set
329.819
3
The FLEX polisher with powerful drive, speed control and two grip variations
High durability thanks to perfect cooling.
Grip and balance means perfect handling. The supplied bail handle offers an optional grip alternative. For the best polishing results on large surfaces, especially for sensitive surfaces
The FLEX polisher with powerful drive, speed control and two grip variations as complete kit
High durability thanks to perfect cooling.
Grip and balance means perfect handling. The supplied bail handle offers an optional grip alternative. For the best polishing results on large surfaces, especially for sensitive surfaces. Complete in kit with Velcro backing pad, sponge and microfaser polishing cloth.
SPECIFICATIONS
Max. polishing pad diameter
Max. back-up pad diameter
Speed without load
Power input
Power output
Tool fixture
Weight
L 602 VR
220 mm
160 mm
0-2400 rpm
1500 Watt
1000 Watt
M 14
3,3 kg
SPECIFICATIONS
Max. polishing pad diameter
Max. back-up pad diameter
Speed without load
Power input
Power output
Tool fixture
Weight
L 602 VR-SET
220 mm
160 mm
0-2400 rpm
1500 Watt
1000 Watt
M 14
3,3 kg
STANDARD EQUIPMENT
1 grip cover
1 side handle
1 bail handle
259.508
252.721
287.709
STANDARD EQUIPMENT
1 grip cover
1 side handle
1 bail handle
1 Velcro pad 160 Ø
1 Velcro sponge 200 Ø x 30
1 microfibre polishing cloth
259.508
252.721
287.709
252.583
304.778
317.098
ADVANTAGES AT A GLANCE
• FLEX five-fold VR electronics: with consistent speed control by tachometer generator, soft start with accelerator trigger switch, overload protection, temperature monitoring, and speed selection with optimised lower speed range
• Integrated air deflection: protects against dust
• Spindle lock: for easy disc changes
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
Perfect control with grip hood and slender handle
For balanced weight distribution and optimal handling.
44
Polishers
ADVANTAGES AT A GLANCE
• FLEX seven-fold microprocessor electronics: with consistent speed control by tachometer generator, soft start, accelerator trigger switch, restart protection after power interruption, overload protection, temperature monitoring, and speed selection
• High-powered motor: can handle extreme loads
• Spindle lock: for easy disc changes
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• Bail handle
• 4 m power cord: with FLEX red plug
Ideal for hard to reach places
The light-weight L 3403 VRG has the advantage wherever large polishers can't get to or would be too cumbersome.
L 3403 VRG
299.278
L 3403 VRG-Set
313.807
The light-weight FLEX polishing machine with accelerator trigger switch for sanding and polishing
Slim stick handle, high torque motor, light weight, and a practical bail handle. That is how to polish easily and effortlessly in every job. The accelerator trigger switch and speed selection allow for a controlled acceleration to the optimal mixing speed.
SPECIFICATIONS
Max. polishing pad diameter
Max. back-up pad diameter
Speed without load
Power input
Power output
Tool fixture
Weight
STANDARD EQUIPMENT
1 bail handle
1 side handle
L 3403 VRG
160 mm
160 mm
1100-3700 rpm
1400 Watt
880 Watt
M 14
2,2 kg
298.506
252.721
The light FLEX polisher as complete kit
Slim stick handle, high torque motor, light weight, and a practical bail handle. That is how to polish easily and effortlessly in every job. The accelerator trigger switch and speed selection allow for a controlled acceleration to the optimal speed. The kit version includes a Velcro backing pad and two sponges. Simply attach the respective Velcro polishing tool centrally to the polishing backing pad using the centring pipe and start working.
Afterwards clean the polished surfaces with the microfibre polishing cloth in order to get a perfect deep sheen.
SPECIFICATIONS
Max. polishing pad diameter
Max. back-up pad diameter
Speed without load
Power input
Power output
Tool fixture
Weight
L 3403 VRG-SET
160 mm
160 mm
1100-3700 rpm
1400 Watt
880 Watt
M 14
2,2 kg
STANDARD EQUIPMENT
1 bail handle
1 side handle
1 Velcro pad 125 Ø
1 Velcro sponge blue, 160 Ø x 30
1 Velcro sponge white, 160 Ø x 30
1 microfibre polishing cloth
298.506
252.721
258.705
304.751
304.786
317.098
3
45
Polishing machines
XC 3401 VRG
322.008
New
XC 3401 VRG-Set
334.081
New
3
The unique FLEX orbital polisher the machine for the perfect finish
The orbital rotation of this innovative polisher simulates the circular movement of the human hand while polishing. At the same time, the polisher's highly smooth running facilitates a careful, precise finish and even provides what is necessary for hologram-free polishing. That's just what this polisher, with its ergonomically designed knob handle, was made for. The positive drive ensures a uniform movement, even under load, thanks to constant lift. Taken in conjunction with the large stroke length there is also the possibility of removing existing holograms from black finishes. Thanks to the direct orbital drive, very little heat develops on the surface, which is ideally suited to temperature-sensitive finishes. The accelerator trigger switch and speed selection allow for a controlled acceleration to the optimal speed. Note: the machine's orbital movement has been optimised for the special back pad and sponge
Ø 160 x 30 mm included with it.
SPECIFICATIONS
Max. polishing pad diameter
Velcro pad Ø
Speed without load
Orbit
Orbit rate, without load
Power input
Power output
Weight
XC 3401 VRG
160 mm
150 mm
160-480 rpm
8 mm
3200-9600 rpm
900 Watt
590 Watt
2,6 kg
STANDARD EQUIPMENT
1 grip cover
1 knob grip
1 Special Velcro backing pad, 150 Ø
332.402
333.565
328.200
The unique FLEX obital polisher for the perfect finish, complete as kit
The orbital rotation of this innovative polisher simulates the circular movement of the human hand while polishing. At the same time, the polisher's highly smooth running facilitates a careful, precise finish and even offers what is necessary for hologram-free polishing. That's just what this polisher, with its ergonomically designed knob handle, was made for. The positive drive ensures a uniform movement, even under load, thanks to constant lift. Taken in conjunction with the large stroke length there is also the possibility of removing existing holograms from black finishes. Thanks to the direct orbital drive, very little heat develops on the surface, which is ideally suited to temperature-sensitive finishes. The accelerator trigger switch and speed selection allow for a controlled acceleration to the optimal speed. The kit version contains a fine Velcro sponge, a microfibre polishing cloth, a mirror-finish polishing wax and a practical kit bag for the machine itself and further accessories. Note: the machine's orbital movement has been optimally adapted for the special back pad and sponge Ø 160 x 30 mm included with it.
SPECIFICATIONS
Max. polishing pad diameter
Velcro pad Ø
Speed without load
Orbit
Orbit rate, without load
Power input
Power output
Weight
XC 3401 VRG-SET
160 mm
150 mm
160-480 rpm
8 mm
3200-9600 rpm
900 Watt
590 Watt
2,6 kg
46
ADVANTAGES AT A GLANCE
• FLEX seven-fold microprocessor electronics: with consistent speed control by tachometer generator, soft start, accelerator trigger switch, restart protection after power interruption, overload protection, temperature monitoring, and speed selection
• 8 mm orbital movement
• Permanent direct drive for an even polished surface
• removable, ergonomic knob grip
• High-powered motor: can handle extreme loads
• Spindle lock
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• 4 m power cord: with FLEX red plug
STANDARD EQUIPMENT
1 grip cover
1 knob grip
1 Special Velcro backing pad, 150 Ø
1 Velcro sponge white, 160 Ø x 30
1 microfibre polishing cloth
1 bottle polishing wax
1 set-bag
332.402
333.565
328.200
304.786
317.098
335.177
333.573
Polishers
ADVANTAGES AT A GLANCE
L 1501 VR
• FLEX four-fold full-wave electronic control: with consistent speed control by tachometer generator, soft start, overload protection and speed preselection
• Two-stage gear reduction: for low speed and high torque
• Spindle lock: for easy disc changes
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• Bail handle
L 1202
• High-powered motor: can handle extreme loads
• Reduction gears: for low speed and high torque
• FLEX Metal composite housing: endurance tested and robust
L 1501 VR
251.664
L 1202
278.688
The low-speed FLEX for highly sensitive surfaces
The gentle middleweight with two-stage gear reduction polishes at extremely low speed but with a high torque. Its speed can also be adapted to suit sensitive surfaces. Ideal for acrylic paints, Corian®, glass fiber-reinforced plastics, glass, stone and water-soluble paints.
SPECIFICATIONS
Max. polishing pad diameter
Max. back-up pad diameter
Speed without load
Power input
Power output
Tool fixture
Weight
L 1501 VR
220 mm
175 mm
275 - 900 rpm
1200 Watt
700 Watt
M 14
2,6 kg
The FLEX marathon polishing machine with metal composite housing
Very high torque, low speed and solid 1600
Watt for toughest non-stop operation with large polishing discs during brushing, polishing, and buffering wood and stainless steel.
SPECIFICATIONS
Max. polishing pad diameter
Max. back-up pad diameter
Speed without load
Power input
Power output
Tool fixture
Weight
L 1202
250 mm
175 mm
1750 rpm
1600 Watt
1100 Watt
M 14
5,1 kg
STANDARD EQUIPMENT
1 bail handle
1 flexible pad 175 Ø
1 lambswool pad 180 Ø
236.934
123.862
123.870
STANDARD EQUIPMENT
1 side handle
1 hand guard
1 handle
193.356
253.618
253.510
3
47
Quality accessories for polishers
Dimensions in mm
Accessories for polishing systems
Microfibre polishing cloth
for perfect surface finish and brilliant deep sheen.
400 x 400
3
High gloss wax
Long lasting paint protection. For a brilliant and full gloss mirror finish, for all paints. Non abrasive. 532 ml bottle.
Velcro pad
Soft and pliable for uniform pressure distribution, universal applications for holding polishing accessories, with centering hole and centering tube, adapter M 14
125 Ø
160 Ø
Velcro sanding pad M 14
115 Ø
125 Ø
with rubber cushioning for uniform pressure distribution
115 Ø
Velcro sponge, blue (coarse, hard)
Universal sponge with high resistance to tearing.
Coarse foam structure for pre-polishing surfaces.
Particularly suitable for extremely weathered or dull painted surfaces. Centering hole, inner diameter 22 mm.
160 Ø x 30
200 Ø x 30
Velcro sponge, yellow (coarse, hard)
Cambered, for polishing edges, extremely weathered or dull paint finishes and for paint treatment. With perforations, inner diameter 22 mm.
220 Ø x 20
48
QP Order number
1 317.098
■ ■ ■ ■ ■ ■
1 335.177
– – ■ – – –
1
1
258.705
252.583
■ ■
■ ■
– ■ – ■
–
■ ■ ■
1
1
208.817
231.983
–
■
– – –
■
– ■ – – – ■
1 240.311
– ■ – – – ■
1
1
304.751
304.778
■ ■ ■ ■ ■ ■
■
– –
■ ■
–
1 256.908
■
– –
■ ■
–
QP = Quantity per package
Polishers
Dimensions in mm
Accessories for polishing systems
Velcro sponge, white (fine, soft)
Fine polishing sponge with high resistance to tearing. For cleaning, polishing and care of lightly-weathered paint surfaces. Centering hole, inner diameter 22 mm.
160 Ø x 30
200 Ø x 30
Cambered, for cleaning and repolishing edges, mildly weathered paint and caring for painted surfaces. With perforations, inner diameter
22 mm.
220 Ø x 20
Velcro sponge, black (supersoft)
Extremely fine and soft for removing holographs on dark paint and minimal paint unevenness.
Specially designed for repolishing curves and depressions. Centering hole, inner diameter
22 mm.
160 Ø x 30
200 Ø x 30
160 Ø x 75
200 Ø x 75
Velcro polishing sponge
For repolishing
120 Ø x 40
Velcro wool pad
Centering hole, inner diameter 22 mm.
Velcro lambswool pad
150 Ø
200 Ø
120 Ø
QP Order number
1
1
304.786
304.794
■ ■ ■ ■ ■ ■
■ – – ■ ■ –
1 256.909
■
– –
■ ■
–
3
1
1
1
1
304.824
304.832
304.808
304.816
■
■
■ ■ ■ ■ ■ ■
■ – – ■ ■ –
– –
■ ■
–
– – ■ ■ –
10 230.596
–
■
– – –
■
1
1
258.704
252.278
■ ■ ■ ■ ■
■ – – ■ ■
–
–
10 230.626
– ■ – – – ■
49
Quality accessories for polishers
Dimensions in mm
Grit
Accessories for polishing systems
Sanding-polishing pad
For high-gloss polishing of stainless steel without polishing medium in three stages
125 Ø
125 Ø
125 Ø grit 600 grit 1500 grit 2500
3
Flexible backing pad
for M 14 backed lambswool
175 Ø
Backed lambswool
only for elastic pad, order no. 123.862
180 Ø
Backed fleece
Fiber backing with M 14 threaded flange, for removing scratches in glass and acrylics
125 Ø
175 Ø
Spare fleece
with fiber backing
125 Ø
175 Ø
QP Order number
1
1
1
318.191
318.205
320.234
– ■ – – – ■
– ■ – – – ■
– ■ – – – ■
1 123.862
■ – – ■ ■ –
1 123.870
■ – – ■ ■ –
1
1
122.726
122.734
■ ■
■ –
–
–
■ ■
– ■
–
–
1
1
122.742
122.750
■ ■
■ –
–
–
■ ■
– ■
–
–
50
QP = Quantity per package
Polishers
Dimensions in mm
Accessories for polishing systems
Molleton buffing wheel
125 Ø
Muslin buffing wheel, coarse
For general polishing. Vertical running, for preliminary polishing, polishing, and repolishing using appropriate buffer wax. Order no. 123.765:
2 pieces needed.
150 Ø x 40
250 Ø x 20
Flannel buffing wheel, medium
For high-gloss polishing. Vertical running, for preliminary polishing, polishing, and repolishing using appropriate buffer wax. Order no. 123.773:
2 pieces needed.
150 Ø x 40
250 Ø x 20
Buffing wheel mount, M 14
60
Buffing wax
light/fine dark/medium red/coarse
Carry bag for polisher
Practical mobile carry bag offer lots of room for machine and accessories, with variable pockets.
QP Order number
1 123.749
■ ■ – ■ ■
1
2
250.159
123.765
– – –
■ ■
– – – – ■
3
1
2
250.158
123.773
– – – ■ ■
– – – – ■
1 123.803
– – – ■ ■ – – –
1 123.811
■ ■ ■ ■ ■
1 123.838
■ ■ ■ ■ ■
1 123.846
■ ■ ■ ■ ■
1 333.573
– ■ ■ – –
51
Eager to cut pipes, profiles and angles:
FLEX saws for the professional
52
Saws
Whether for metal, plastic, or wood; you‘ll find a robust professional saw for any material at FLEX.
Foremost the unique reciprocating saw FLEX Tiger Claw
SKL 2903 VV. Its rotatable joints make it possible to saw in the tightest corners without you having to get all bent out of shape. Further power packs available: pipe reciprocating saws, jigsaws, metal circular saws, circular saws for wood, metal and stone, as well as an elaborate accessories program.
4
53
4
Application examples: Saws
A rECIproCATIng
SAw For Any job
Saw pipe corners...
...pipes in remotest corner:
Simply turn the joint and continue sawing! Special reciprocating saw Tiger
Claw SKL 2903 VV with 3-D function joint
on page 57
54
TooL-FrEE SAw bLADE ChAngE patented FLEX Quik-Change® exchange system: Turn tool holder, exchange saw blade
– and continue sawing. FLEX
Quik-Change®
starting page 56 pIpE SAwIng EXACTLy
AT rIghT AngLES
Simply fasten the pipe bracket and put on the power. pipe reciprocating saw Sr 602 VV
on page 58
Saws
unobSTruCTED VIEw oF ThE SAw bLADE you can see the saw blade also from the left. Quite practical for bevel cuts. Circular saw
CS 3455 A
on page 60
ThE powErFuL when cut-off grinders aren‘t suited for or don’t do a clean cut, the CSM 4060 cuts everything: panels, profiles, corrugated sheets, composite materials, and much more. Metal circular saw CSM 4060
on page 61 broAD rAngE oF
AppLICATIonS
The jigsaw is particularly well suited to clean and precise sawing of wood, plastic and metal. orbit cutting jigsaw S 203 bVE
on page 59
4
prECISE wET CuTS Through nATurAL AnD ArTIFICIAL
STonE
Marble, granite or exposed aggregate panels are cut precisely with the edge guide. Diamond masonry cutter CSw 4160
on page 62
55
Sabre saws
S 2902 VV-Basic
307.779
SKE 2902 VV
331.678
4
The 1200 Watt universal reciprocating saw with accelerator trigger switch
It has everything that a reciprocating saw really needs for daily use. As much as necessary, as perfect as possible: powerful, versatile, and robust.
The 1200-Watt reciprocating saw with orbital cutting action
The premium model of the FLEX universal reciprocating saws, with all the extras e.g.
switchable orbital stroke, keyless support shoe adjustment and Quik-Change® blade holder for fast blade changing.
SPECIFICATIONS
Orbit rate, without load
Orbit
Power input
Power output
Weight
S 2902 VV-BASIC
0-2600 rpm
28 mm
1200 Watt
670 Watt
3,8 kg
STANDARD EQUIPMENT
1 assortment of saw blades
1 hexagon socket screw key, special tool 3/16"
1 hexagon socket screw key, special tool 5/32"
1 plastic carrying case
198.757
802.905
802.876
1 piece
SPECIFICATIONS
Orbit rate, without load
Orbit
Power input
Power output
Weight
STANDARD EQUIPMENT
1 assortment of saw blades
1 plastic carrying case
SKE 2902 VV
0-2600 rpm
28 mm
1200 Watt
670 Watt
4,0 kg
198.757
1 piece
ADVANTAGES AT A GLANCE
• 1200 Watt high-power motor: enduring, reliable power pack
• Softgrip handle: eliminates most of the vibration
• FLEX two-fold VV electronics: with consistent stroke control, soft start with accelerator trigger switch
• Saw blade positioning: 0° and 180°, even for over-head sawing
• Heavy-duty carrying case
ADDITIONALLY FOR S 2902 VV-BASIC
• Universal saw blade holder: for an easy saw blade exchange
• Saw support: tilt adjustment
ADDITIONALLY FOR SKE 2902 VV
• Orbital stroke: switch-activated, especially for fast sawing through wood
• Quik-Change®: Exchange saw blades quickly without tools with the stainless steel saw blade tool holder
• Saw support: tilting and depthadjustable to 4 levels without tools
56
Saws
ADVANTAGES AT A GLANCE
• FLEX two-fold VV electronics: with consistent stroke control, soft start with accelerator trigger switch
• Two joints facilitate almost unlimited positioning possibilities
• Quik-Change®: Exchange saw blades quickly without tools with the stainless steel saw blade tool holder
• Saw support: adjustable angle, additional four-fold depth adjustment
SKL 2903 VV
300.713
SKL 2903 VV: the 3-D function joint
Gets into every corner.
The FLEX Tiger Claw with 3-D function joint can cut round corners
The doubly rotatable reciprocating saw stands out because of its flexibility: the rear gear housing adjusts as much as 180° with 13 positive stop locations. The front gear housing scrolls 360° with 12 positive stop locations, both even during sawing. Ideal in tight spaces: disposing of old oil tanks, in sanitation, heating and ventilation installation, in automotive shops, and so forth.
4
SPECIFICATIONS
Orbit rate, without load
Orbit
Power input
Power output
Weight
SKL 2903 VV
0-2900 rpm
29 mm
1200 Watt
650 Watt
4,0 kg
STANDARD EQUIPMENT
1 assortment of saw blades
1 saw blade adapter
1 plastic carrying case
198.757
302.864
1 piece
57
Sabre saws, Jigsaws
SR 602 VV
278.866
SK 602 VV
282.308
4
The FLEX sabre pipe saw with pipe clamp
The powerful 1300 Watt orbital stroke saw for plumbers is fitted with a generously-dimensioned, rectangular blade shaft designed to withstand extreme loads. It can easily saw pipes up to 4" at an exact right angle. The chain clamp fixture (accessory order no.
251.259) means that even steel pipes up to
6" and plastic pipes up to 8" can be cut. The infinitely variable electronic speed pre-selection combined with the acceleration trigger enables a soft sawing with all materials. The additional adjustable speed facilitates the adjustment and retention of a constant stroke.
The FLEX sabre saw with pipe cutting support
The 1300 Watt orbital stroke saw with reinforced blade shaft guidance and adjustable saw stop. You can tackle any metal work with this machine. The pipe cutting support supplied with the saw holds pipes up to 1 1/2" and facilitates precision pipe cutting in any position.
SPECIFICATIONS
Orbit rate, without load
Orbit
Power input
Power output
Weight
SK 602 VV
0-2400 rpm
27 mm
1300 Watt
850 Watt
3,9 kg
SPECIFICATIONS
Orbit rate, without load
Orbit
Power input
Power output
Weight
SR 602 VV
0-2400 rpm
27 mm
1300 Watt
850 Watt
4,4 kg
198.633
STANDARD EQUIPMENT
1 side handle
1 hexagon socket screw key, special tool 4
1 standard cutting support
1 assortment of saw blades
1 spare clamp for sabre saw blade
1 pipe cutting support
1 plastic carrying case
198.633
211.494
210.935
1 set
205.788
217.689
329.908
STANDARD EQUIPMENT
1 side handle
1 hexagon socket screw key, special tool 4
1 standard cutting support
1 assortment of saw blades
1 pipe clamp for pipes up to 2"
1 plastic carrying case
211.494
254.926
1 set
259.983
329.908
ADVANTAGES AT A GLANCE
• FLEX four-fold VV electronic control: with consistent speed control, soft start with accelerator trigger switch, overload protection and speed preselection with adjusting wheel
• Orbital stroke: selective
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
ADDITIONALLY FOR SK 602 VV
• Standard cutting support
• Pipe cutting support
• Acceleration trigger: sensitive sawing at the first cut
Chain clamp fixture for SR 602 VV
Fits for steel pipes from 1/2" to 6" and plastic pipes up to 8". Order no. 251.259
58
Saws
ADVANTAGES AT A GLANCE
• FLEX VE electronic control: for infinitely-adjustable stroke speed control
• Orbital stroke: 3 settings for higher cutting rate
• Toolless blade changing
• Saw blade guide: 2-fold, for cutting of exact angles.
• Foot plate quick adjustment: for bevel cuts with 15°, 30° and 45° catches.
offset to back for sawing close to edges
• Vacuum flange: for a cleaner workplace and clear view of the cut
• Anti-splinter protection: removable, for clean cuts
• Stable base plate: with removable plastic guide block for the protection of delicate surfaces. Can be adjusted 45°
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
S 203 BVE
329.363
S 203 KVE
329.371
The versatile FLEX jig saw with bail hand grip
Perfect angles, quick and exact curves cut in various materials, with or without mitre.
these are the advantages of the powerful
FLEX jig saw. With the bail handle ensures a light and perfect guidance of the machine in tight curves. The light weight, an elaborate saw blade guide, the adjustable cutting speed and an effective dust collection round off the quality of the FLEX jig saw.
The easy to handle jig saw with knob hand grip
Ideal for quick, exact and precise angle curved cutting in various materials. The knob grip allows easy guidance even in difficult working positions, e.g. when sawing kitchen worktops. Further advantages are: light weight, high-quality saw blade guide, infinite speed control, on off orbital stroke and efficient dust removal.
4
SPECIFICATIONS
Power input
Power output
Orbit rate, without load
Orbit
Max. cutting depth in wood
Max. material thickness in steel 400 N/mm 2
Max. material thickness in aluminium 250 N/mm 2
Pivoting range
Weight
STANDARD EQUIPMENT
1 assortment of saw blades
1 anti-splinter guard
1 guide block
1 hexagon socket screw key, special tool 4
1 set
1 piece
1 piece
1 vacuum adapter
1 chip deflector guard
1 piece
1 piece
1 piece
1 protection against flying swarf, closed 1 piece
1 metal carrying case
1 piece
S 203 BVE
550 Watt
320 Watt
300-3200 rpm
26 mm
110 mm
10 mm
20 mm
0-45°
2,0 kg
SPECIFICATIONS
Power input
Power output
Orbit rate, without load
Orbit
Max. cutting depth in wood
Max. material thickness in steel 400 N/mm 2
Max. material thickness in aluminium 250 N/mm 2
Pivoting range
Weight
STANDARD EQUIPMENT
1 assortment of saw blades
1 anti-splinter guard
1 guide block
1 hexagon socket screw key, special tool 4
1 set
1 piece
1 piece
1 vacuum adapter
1 chip deflector guard
1 piece
1 piece
1 piece
1 protection against flying swarf, closed 1 piece
1 metal carrying case
1 piece
S 203 KVE
550 Watt
320 Watt
300-3200 rpm
26 mm
110 mm
10 mm
20 mm
0-45°
1,9 kg
59
Circular saws
CS 3455 A
304.212
TCS 3602
271.934
4
The powerful FLEX hand circular saw for tough on-site applications
All components of the 1100 Watt saw which are subject to particular stress are made of sturdy die-cast aluminum (e.g. the guide plate, gearbox housing and guard). The high speed of this saw ensures that cutting is extremely accurate, while the dust suction and the chip material channel in the guard keeps everything clean.
SPECIFICATIONS
Blade Ø
Saw blade drill Ø
Max. cutting depth (45°)
Max. cutting depth (90°)
Pivoting range
Speed without load
Power input
Power output
Weight
CS 3455 A
160 mm
20 mm
0-38 mm
0-55 mm
0-45°
4700 rpm
1100 Watt
660 Watt
3,7 kg
The FLEX metal circular saw for rapid, mobile sawing applications
This robust cutting professional, saws metal with carbide tipped circular saw blades.
Requires no coolant, but cuts fast. This rapidaction saw can be used in assembly work for uncomplicated profiles, steel pipes, aluminum, copper and PVC cutting.
SPECIFICATIONS
Blade Ø
Max. cutting depth (45°)
Max. cutting depth (90°)
Speed without load
Power input
Power output
Weight
TCS 3602
355 x 25,4 mm
90 mm
130 mm
1380 rpm
1900 Watt
1200 Watt
28,3 kg
STANDARD EQUIPMENT
1 carbide tipped saw blade,
12 teeth (160 x 20 mm)
1 parallel stop
1 open-ended wrench
1 hexagon socket screw key, special tool 5
271.888
272.566
272.582
115.460
STANDARD EQUIPMENT
1 carbide tipped saw blade, 80 teeth
1 safety glasses
1 hexagon socket screw key
1 open-ended wrench
273.643
500.305
104.167
106.461
ADVANTAGES AT A GLANCE
CS 3455 A
• Pivoting base plate: with exact angle scale for miter cutting from 0° to 45°, tool-free adjustment
• Safety switch: with lock-off switch
• Chip channel: for noticeably improved chip channeling
• Dust extraction: with direct connection to the universal adapter of the FLEX industrial vacuum cleaner
TCS 3602
• Angle and parallel stop: tool-free adjustment, for miter cuts up to 45°
• Depth adjustment: for precision cutting
• Aluminum die-cast base: for secure positioning
• Spindle lock: for quick replacement of blades
• Chip collection box: removable
• Work without coolant
• Safety equipment: overload protection, safety switch, large guard, transportation lock
Saws metal without coolant
The metal saw with carbide tipped circular saw blades – for quick, mobile sawing jobs. Metal circular saw TCS 3602
60
Saws
ADVANTAGES AT A GLANCE
• 1400 Watt high-power motor: for precise cuts without coolant
• Spindle lock: for quick and easy changing of the saw blade
• Depth-adjustable saw foot for stepless setting of the cutting depth up to 63 mm for precise cuts
• Chip collection compartment with view window: large capacity, for a clean, chip-free work place
• Extensive selection of standard equipment with 2 carbide-tipped saw blades, assembly tools and edge guide
• Special carbide-tipped saw blades: nearly burr-free cuts, trimming threaded bars possible without recutting the thread
• Heavy-duty carrying case
Maximum cutting depths:
- Solid material / flat steel: 6 mm;
- Round material: 20 mm;
- Hollow sections: 63 mm
Swarf that could rust is caught in the swarf collecting container
Emptying is easy: Check the fill level through the view window, unscrew wing bolt, empty contents. Metal circular saw
CSM 4060
CSM 4060
307.815
The versatile metal circular saw for dry cuts
For fast, clean cuts through pipes, threaded rods, profiles, cable ducts, corrugated and trapezoidal sheet metal, sandwich boards and much more. With integrated chip collection compartment.
4
SPECIFICATIONS
Blade Ø
Saw blade drill Ø
Max. cutting depth (90°)
Max. material thickness in steel 400 N/mm 2
Max. material thickness in aluminium 250 N/mm 2
Speed without load
Power input
Power output
Weight
CSM 4060
185 mm
20 mm
0-63 mm
6 mm
10 mm
3800 rpm
1400 Watt
720 Watt
5,4 kg
STANDARD EQUIPMENT
Carbide tipped saw blades for steel,
38 teeth (185 x 20 mm)
1 parallel stop
1 ring / open-ended wrench
1 plastic carrying case
312.304 (2x)
312.312
312.347
1 piece
61
Circular saws
CSW 4160
311.154
4
The diamond masonry cutter for wet cutting natural and man-made stone
For cuts through natural and artificial stone slabs up to 55 mm thick: for windowsills, worktops, facing tiles, terrazzo tiles in landscaping, and much more. Ideal as well for renewing joints in tiled flooring.
SPECIFICATIONS
Diamond disc Ø
Saw blade drill Ø
Max. cutting depth (45°)
Max. cutting depth (90°)
Speed without load
Power input
Power output
Weight
STANDARD EQUIPMENT
1 parallel stop
1 Wrench for saw blade change
1 Diamantjet-V cutting disc
(180 x 22,2 mm)
1 Velcro fleece support for guide foot
1 plastic carrying case
1 GFCI operator protection circuit breaker in cord
309.273
878.391
309.974
310.093
1 piece
283.606
CSW 4160
180 mm
22 mm
0-40 mm
0-55 mm
5800 rpm
1600 Watt
810 Watt
5,3 kg
ADVANTAGES AT A GLANCE
• 1600 Watt high-power motor: extra strong, for cutting stone, and milling joints
• Water supply: for an effective cooling of the diamond tool
• Quick-action, brass coupling: for 1/2" water hoses
• GFCI operator protector circuit breaker: integrated in cord
• Spindle lock: for easy diamond disc changes
• Tilting foot: for bevel cutting capacity
0° - 45°, tool-free adjustable
• Aluminium wheel guard with vacuum connection 25 mm Ø: to suck off saw sludge using the FLEX vacuum S 36
• Heavy-duty carrying case
Cleaner, healthier, and safer working
Use diamond wet masonry saw best together with the FLEX dry/wet vacuum
S 36 or S 36 M. Efficiently removes saw sludge.
Renew grouting/joints quickly and neatly
The solution to the problem: mill out damaged joints without residues using suction - reseal - finished.
62
Saws
Accessories for SK 602 VV, SKE 2902 VV,
S 2902 VV-Basic and SKL 2903 VV
Sabre saw blades for metal and sheet material
All reciprocating saw blades with common saw blade mount.
Hard metals, 1.15 mm and thicker, bi-metal
Teeth per inch
18
Length in mm QP
100 5
Order number
200.700
Sabre saw blade for wood, plaster, porous concrete and other applications
All wood types
Teeth per inch
4
Length in mm QP Order number
150 5 200.751
Wood with nails, bi-metal
Teeth per inch
10
Length in mm QP Order number
150 5 200.778
Hard metals, 3.0 mm and thicker, bi-metal
Teeth per inch
14
Length in mm QP
150 5
Order number
200.727
Wooden board (coarse/standard cuts)
6
6
Teeth per inch
Length in mm QP Order number
300
150
5
5
201.936
200.786
Hard metals, 1.15 mm and thicker, bi-metal
Teeth per inch
18
Length in mm QP
150 5
Order number
200.735
Hard metals, 1.15 mm and thinner, bi-metal
Teeth per inch
24
Length in mm QP
150 5
Order number
200.743
Length in mm QP
200 5
Order number
222.291
Coarse rapid cuts in wood
Teeth per inch
3
3
Length in mm
150
Length in mm QP Order number
225 5 250.054
300 5 250.055
Coarse rapid cuts in green-wood
Teeth per inch
3
Length in mm QP Order number
220 5 250.056
Long metal strip 3 - 10 mm, bi-metal
Teeth per inch
10
Length in mm QP
280 5
Order number
201.928
Hard metals, 3.0 mm and thicker (also for palette repair), bi-metal
Plaster, porous concrete, eternit, non-ferrous metal, glass-fiber reinforced plastic, carbide tipped
6
3
Teeth per inch
Length in mm QP Order
150
300
1
1 number
202.061
206.210
Teeth per inch
14
Length in mm QP
200 5
Order number
217.190
Gypsum boards, porous concrete
Teeth per inch
6
Length in mm QP Order number
300 5 206.202
Hard metals, 1.50 mm and thicker, bi-metal
Teeth per inch
18
Length in mm QP
200 5
Order number
217.751
Sabre blade assortment for plastic/wood/metal
consisting of: 1 Plastic saw blade, 150 mm: 200.735; 1 Wood saw blade, 150 mm:
200.786; 1 Metal saw blade, 150 mm: 200.778, all bi-metal.
Trapezoidal sheet metals
Teeth per inch
32
QP Order number
3 198.757
4
QP = Quantity per package
63
Quality accessories saws
Accessories for SR 602 VV
Pipe saw blades
for pipe reciprocating saw with pipe bracket or chain tensioning device. with special saw blade mount. Extra strong for metal pipes.
Pipe Ø up to 2", wall thickness from 3.0 mm
Teeth per inch
8
Length in mm QP Order number
150 5 252.329
Accessories for free-hand cutting with the SR 602 VV
Saw blades for free-hand cutting
with special saw blade mount.
Pallets - wood/nails
Teeth per inch
10
Length in mm QP
200 5
Order number
252.103
Pipe Ø up to 4", wall thickness from 3.0 mm
Teeth per inch
8
Length in mm
210
QP
5
Order number
251.620
Palettes - wood/nails with variable toothing, bi-metal
Teeth per inch
10/14
Length in mm QP
210 5
Order number
256.518
4
Pipe Ø up to 6", wall thickness from 3.0 mm (only with chain clamp fixture)
Teeth per inch
8
Length in mm
275
QP
5
Order number
252.167
Metal, wall thickness from 1.8 mm
Teeth per inch
14
Length in mm QP
210 5
Order number
248.894
Plastic pipe up to 125 mm Ø
Teeth per inch
18
Plastic pipe up to 200 mm Ø
Teeth per inch
18
Chain clamp fixture
Metal, wall thickness from 2.0 mm
Teeth per inch
14
Length in mm QP
150 5
Order number
248.886
Length in mm QP Order number
230 5 252.136
Length in mm QP Order number
310 5 252.137
Accessories for SR 602 VV and SK 602 VV
Plastic Multi-Carry case
Perfect fitting, impact resistant carry case, universally adaptable for many different FLEX-Maschines
QP
1
Order number
329.908
Fits for steel pipes from 13 mm to 150 mm and plastic pipes up to
200 mm.
QP Order number
1 251.259
64
QP = Quantity per package
Saws
Accessories for the jig saw S 203 BVE and S 203 KVE
Jigsaw blades for wood
All saw blades with common saw blade mount.
Hardwood, plywood, hard fiber boards up to 30 mm
Teeth per inch
10
Length in mm QP
75 5
Order number
204.560
Accessories for hand circular saw CS 3455 A
HM alternating teeth saw blade
for wood or wood-like materials at medium cutting quality (12 teeth)
Dimensions in mm
160 Ø x 20
QP
1
Order number
271.888
for wood or wood-like materials at good cutting quality (36 teeth)
Hard and soft wood, plywood boards up to 60 mm, curved cuts
Teeth per inch
6
Length in mm QP
75 5
Order number
204.579
Dimensions in mm
160 Ø x 20
QP Order number
1 271.896
Hard and soft wood, hard fiber boards 60 mm
Teeth per inch
6
Length in mm QP
75 5
Order number
204.617
Accessories for metal circular saw TCS 3602
Saw blades
Hard and soft wood, soft plastic, special for curved cuts
Special HM saw blade, 14 inch (Ø 355 mm), bore Ø 25.4 mm. For universal application
Dimensions in mm
Teeth
355 Ø x 25,4 80
QP
1
Order number
273.643
Teeth per inch
6
Length in mm QP
75 5
Order number
204.692
Jigsaw blades for fibrous wooden boards, metal, plastics, etc.
All saw blades with common saw blade mount.
Reinforced saw blade, for straight cutting with stop for thick materials (e.g. fibrous wooden boards).
Length in mm QP Teeth per inch
6 75 5
Order number
216.216
Special HM saw blade, 14 inch (Ø 355 mm), bore Ø 25.4 mm. For stainless steel (V2A). With fine toothing for stainless steel cuts, master blade with laser-cut ornaments for a low-noise cut. Very well suited also for sawing sheet metal.
Dimensions in mm
Teeth
355 Ø x 25,4 90
QP Order number
1 280.712
Accessories for metal circular saw CSM 4060
Carbide tipped saw blade for steel
Iron, soft steel up to 4.0 mm, most prevalent metal strip
Teeth per inch
20
Length in mm QP
55 5
Order number
204.587
enables a practically burr-free cut, no touching up is necessary
Dimensions in mm
185 Ø x 20
Teeth
38
QP Order number
1 312.304
Non-ferrous metal, soft steel up to 6.0 mm, iron, plastics
Teeth per inch
12
Length in mm QP
55 5
Order number
204.706
Accessories for Diamond-Stone Saw CSW 4160
Diamond-V cutting disc
Dimensions in mm
180 Ø x 22
QP Order number
1 309.974
4
65
Even when the going gets tough:
The FLEX mixing machines pull through
66
Mixers
Bring in a mixer from FLEX!
It has to be compact. It has to be robust. It has to be protected from dirt and damage. Feature a lot of torque. Be comfortable to hold.
Many years of experience and intensive cooperation with the professionals in the field have flown into the FLEX mixing machine and mixing head program. The motor, the cooling, and the gears have been designed for tough, continuous operation lasting for hours. And the mixing heads made of powdercoated, highquality metal feature stable weld joints, burr-free edges, and circumferential protection rings.
Robust quality for professional practitioners.
5
67
Application examples: Mixing machines
5
For mixing to suit the material:
Thorough blending of the various materials commonly mixed today prevents construction damage and costly consequential charges. That is why several basic rules must be observed.
Viscous and heavy materials overstrains drills. Use specially constructed mixing machines, with optimised speeds and power transmission.
When selecting the mixer observe the direction of flow: Pulverized material from bottom to top, thin liquid materials from top to bottom or mix with parallel direction of flow. At immersion a reduced speed prevents spraying. FLEX mixing machines with accelerator trigger switches permit the gradual acceleration to the required speed. Air pockets are minimised by the complete immersion of the mixing head.
For your safety you should wear protective goggles and possibly a dust mask.
Never mix solvents with a flashpoint below 21°C. Observe the processing and safety instructions of the material or machine manufacturers.
68
Mixers
1
2
3
4
5
6
7
8
1
2
3
Optimal handling
Low weight, upright body stance, and natural arm position makes mixing become a breeze.
Stable deposit and safety hoop
Safe protection from dirt and damage.
Accelerator trigger switch and FR electronics
With stepless speed regulation for a controlled acceleration to the optimal mixing speed. Sustained power in all speed ranges.
4
5
6
7
8
Special motors
Robust, sustained power, and perfectly cooled – because the life of a mixer is especially rough.
Ergonomic handle
Fits to the anatomy of various types of operator hands. With anti-slip coating in the grip area.
Robust 1-gear and 2-gear transmissions
For every mixture mass the proper mixing speed – for non-spraying working and lump-free blending results suited to the material.
M 14 mixing head mount
For a quick and easy change of the mixing heads.
Quality mixing heads
Made of high-quality materials and powder-coated – so that valuable mixture masses are not contaminated for example by rust particles. Circumferential protection ring prevents damage to the mixing container.
5
69
Mixing machines
R 500 FR
314.587
R 502 FR
314.595
5
The handy 1010 Watt single-gear mixer for smaller mixtures
Light powerful single-gear mixing machine with speed control for general mixing jobs.
With standard mixing head RS 1 and broad speed range of 0-530 rpm perfect for mixing smaller batches with low viscosity such as paints, dispersion paints, adhesives, jointing mortar, ready mix plaster, and so forth up to about 35 kg.
The universal 1010 Watt 2-gear mixer with 2 mixing heads
Compact, power-sustaining 2-gear mixer for pulpy and thin liquid mixtures. 1st gear: With mixing head RS 1 ideal for mixing materials with low viscosity. 2nd gear: The mixing head
RS 0 with counter-flow mixing action and the stepless adjustable speed of 0-740 rpm make it possible to blend thin liquid materials especially fast and thoroughly, such as lacquers, enamels, adhesives, primers.
SPECIFICATIONS
Speed without load
Power input
Power output
Tool fixture
Clamping neck Ø
Max. mixing head Ø
Weight
STANDARD EQUIPMENT
1 mixing head RS 1, 120 Ø
1 adapter M 14 x M 14, SW 19
R 500 FR
0-530 rpm
1010 Watt
600 Watt
M 14
43 mm
130 mm
4,1 kg
320.498
255.195
SPECIFICATIONS
Speed without load 1st gear
Speed without load 2nd gear
Power input
Power output
Tool fixture
Clamping neck Ø
Max. mixing head Ø
Weight
STANDARD EQUIPMENT
1 mixing head RS 1, 120 Ø
1 mixing head RS 0, 120 Ø
1 adapter M 14 x M 14, SW 19
R 502 FR
0-530 rpm
0-740 rpm
1010 Watt
600 Watt
M 14
43 mm
130 mm
4,2 kg
320.498
254.176
255.195
ADVANTAGES AT A GLANCE
• 1010 Watt high performance motor: quiet operation, high robustness and long durability
• FLEX full-wave electronics: with soft start-current limitation, temperature monitoring, overload protection, and with stepless speed regulation with the accelerator trigger switch - for a controlled acceleration to the optimal mixing speed. Sustained power in all speed ranges
• Ergonomic handle: light weight, fatigue-free arm posture and erectness for a comfortable and vigour saving handling. With anti-slip coating
• Stable safety and deposit hoop: Protects the machine from dirt and damage
• Dust- and splash-proof housing: ensures a safe operation for machine and operator
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
ADDITIONALLY FOR R 500 FR
• Robust 1-gear speedbox: generously dimensioned and optimally transformed
- for a high torque transmission and long durability
• With 1 mixing head: RS 1
ADDITIONALLY FOR R 502 FR
• Robust 2-gear transmission: generously dimensioned with optimal ratio - for speeds suited to the material, a powerful torque transmission and an especially long service life
• With 2 mixing heads: RS 1 and RS 0
70
Mixers
ADVANTAGES AT A GLANCE
• FLEX four-fold full-wave electronic control: with consistent speed control, soft start with acceleration trigger, overload protection and speed preselection with adjusting wheel
• Protection frame
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• not suitable for use in explosive environments
ADDITIONALLY FOR R 600 VV
• With 1 mixing head: RS 3
• Mixing head adapter: M 18
ADDITIONALLY FOR RZ 600 VV
• With 2 mixing heads: I and II
• Mixing head adapter: 2 x 16 mm Ø with keyway
Getting down to business
The R 600 VV is especially suited for larger mixtures because of its powerful construction.
R 600 VV
282.359
RZ 600 VV
282.413
The robust FLEX mixer with speed pre-selection
The stepless controllable R 600 VV is ideal for mixing paints, viscous adhesives, solvents, and insulating materials. Its speed selection allows it to be optimally set for any material.
The accelerator trigger switch gradually increases the speed, avoiding spraying.
SPECIFICATIONS
Speed without load
Power input
Power output
Tool fixture
Clamping neck Ø
Max. mixing head Ø
Weight
R 600 VV
0-500 rpm
1300 Watt
850 Watt
M 18
63 mm
160 mm
5,4 kg
The FLEX double positive mixer
This powerful mixer operates with two counter-rotating mixing heads. These counter external torque, making it easy to guide. Mixtures are also mixed particularly thoroughly.
Ideal for tough adhesive, insulating material, multi-component resins, varnish and paint.
Thanks to the speed pre/selection, it can be adjusted optimally to any material. The speed is slowly boosted by the acceleration trigger and prevents splashing.
5
SPECIFICATIONS
Speed without load
Power input
Power output
Tool fixture
Clamping neck Ø
Max. mixing head Ø
Weight
RZ 600 VV
0-400 rpm
1300 Watt
850 Watt
2 x 16 mm Ø
63 mm
130 mm
6,3 kg
STANDARD EQUIPMENT
1 handle (long)
1 mixing head RS 3, 160 Ø
1 adapter M 18 x M 14
1 open-ended wrench SW 24
259.538
257.745
250.484
198.781
STANDARD EQUIPMENT
1 handle (long)
Mixing head I and II
257.580
252.200
71
Quality accessories mixers
Mixing head for R 502 FR
Mixing head RS 0
For low-viscosity material, such as paint, light plaster, resin, etc.
Ideally suited for materials in which a flow is created.
Parallel mixing principle: paddle mixer with counter-flow mixing action. Low construction for minimum air pockets.
Equipment
- Shaft with M 14 x 2.0 external thread
- Solid welded steel design with limit nut
- Powder coated
- 600 mm overall length
Mixing head in mm
120 Ø
Mixture in kg
10 - 50
QP
1
Order number
254.176
Mixing head RS 3
For highly-viscous material, such as adhesive and injection casting material, mortar, lime, cement, screed, grouting compound, liquid insulating and thermal insulating material, quartz-filled epoxy resin, shoulder bonding material, paste and granulates.
Mixing principle from bottom to top: the three mixer blades ensure that work progresses rapidly. Maximum mixing effect, thanks to high shear force. Effortless application and ease of motion.
Equipment
- Shaft with M 14 x 2.0 external thread
- Solid welded steel design with limit nut
- Powder coated
- 600 mm overall length
QP Mixing head in mm
130 Ø
160 Ø
Mixture in kg
20 - 50
50 - 150
1
1
Order number
258.312
257.745
5
Mixing head for R 500 FR and R 502 FR
Mixing head RS 1
Mixing head RS 4
For highly-viscous material, such as adhesive and injection casting material, mortar, lime, cement, screed, grouting compound, liquid insulating and thermal insulating material, quartz-filled epoxy resin, shoulder bonding material, paste and granulates.
Mixing principle from bottom to top: three mixer blades ensure that work progresses rapidly. Maximum mixing effect, thanks to high shear force. Effortless application and easily controlled.
Equipment
- Shaft with M 14 x 2.0 male thread
- Stable, welded steel construction with limit nut
- Galvanized
- 600 mm overall length
Mixing head in mm
120 Ø
Mixture in kg
5-35
QP
1
Order number
320.498
Mixing head RS 5
For tough, adhesive, highly-viscous material, such as tile adhesive, thin-bed mortar, ready-mixed mortar, screed, plaster, grouting, etc.
Mixing principle from bottom to top: the mixing head is drawn downwards. This prevents air pockets developing. Two helixes with low shearing force for effortless mixing.
Equipment
- Shaft with M 14 x 2.0 external thread
- Solid welded steel design with limit nut
- Powder coated
- 600 mm overall length
Mixing head in mm
130 Ø
160 Ø
Mixture in kg
20 - 30
30 - 100
1
1
QP Order number
258.313
258.314
Mixing heads for R 600 VV
Mixing head RS 2
For liquid, low viscosity material, such as paint, facade and dispersion paints, dual-component paint, lead primer, bitumen, insulation material, cement slurry, etc.
Mixing principle from top to bottom: forces the material from the surface downwards with two meshing mixer blades - preventing splashing.
Equipment
- Shaft with M 14 x 2.0 external thread
- Solid welded steel design with limit nut
- Powder coated
- 600 mm overall length
Mixing head in mm
110 Ø
140 Ø
Mixture in kg
15 - 40
30 - 60
QP Order
1
1 number
258.310
258.311
For liquid, fibrous material, such as dispersion paint, paint, plaster, cement slurry, gypsum lime mortar and thermal resistant plaster.
Even mixes fine, creamy plaster without forming lumps.
Mixing principle from top to bottom: forces the material from the surface downwards with three meshing mixer blades, preventing splashing.
Equipment
- Shaft with M 14 x 2.0 external thread
- Solid welded steel design with limit nut
- Powder coated
- 600 mm overall length
QP Mixing head in mm
160 Ø
Mixture in kg
30 - 60 1
Order number
305.197
72
QP = Quantity per package
Mixers
Accessories for mixer R 500 FR, R 502 FR, and R 600 VV
M 18 to M 14 adapter
Mixing with the FLEX L 1202 angle mixer
Mixing paddle, M 14
For connecting FLEX mixing head fixtures to FLEX mixing machines
R 600 and R 600 VV. All FLEX mixing head fixtures can be combined with any commercially available drive machine by using this adapter.
QP
1
Order number
250.484
Mixing head, M 14
For larger quantities. Used with an extension piece.
Dimensions in mm
120 Ø
QP Order number
1 124.761
M 14 to M 14 adapter
For connecting FLEX mixing head fixtures to FLEX mixing machines
R 500 FR and R 502 FR. All FLEX mixing head fixtures can be combined with any commercially available drive machine by using this adapter.
QP
1
Order number
255.195
For smaller quantities. Used with an extension piece.
Dimensions in mm
70 Ø
QP Order number
1 124.753
Extension piece, M 14 for mixing paddle + mixing head
Mixing heads for the RZ 600 VV positive mixer
Mixing head I and II, galvanized version
Extension piece, M14 (can be extended as required)
Dimensions in mm
400
QP Order number
1 124.818
5
Ideal for tough mixtures, adhesive, dual and multi-component resins and plastics, varnish and paint, sealing and insulation material, coating material, ready-mixed mortar, plaster, concrete adhesive, etc.
Counter-active mixing: Both mixing heads mesh and blend the mixture with particular intensity.
Equipment:
- Supplied in pairs, adapted for the FLEX positive mixer. For insertion in the positive mixer guides.
- 600 mm overall length
Please note: the mixing head with marking ring is inserted in fixture I, the mixing head with two marking rings in fixture II.
Mixing head in mm
130 Ø
Mixture in kg QP
5 - 60 1
Order number
252.200
73
Effortless to the ceiling:
The FLEX Giraffe sands at highest level
74
Floor and wall finishing
Need to sand off three- metre-high ceilings and wall surfaces?
You used to need a ladder. Now you take a long-neck sander: the Giraffe from
FLEX. It goes so much faster, is cleaner thanks to dust extraction, and above all: perfect.
The outstanding qualities of the long-necked grinder FLEX
Giraffe have been talked about around the whole world.
Whether smoothening plasterboard panels or upgraded insulation Styrofoam panels, painting preparation, or polishing – the
Giraffe has become the indispensable problem solver for every painter, plasterer, or other professional user: The unique Giraffe saves time, money, and muscle power every day.
In order to do its job especially neatly and effectively the Giraffe needs strong partners: An effective, robust industrial vacuum cleaner
– such as the FLEX S 36 or S 36 M – and the right sanding discs. Only by applying the optimal triple combination of grinder, vacuum, and sanding disc accessories can the user get the most out of the Giraffe.
As a machine manufacturer FLEX let its entire experience flow into the development of the patented Giraffe sandpaper and has adapted its construction to the specific characteristics of the Giraffe.
Hit the ceiling – without a ladder and from a firm footing!
6
75
Application examples:
Long-neck and short-neck sanders
6
pATENTEd SANdING HEAd
The articulating sanding head can be adjusted to every tilt and angle.
A cOMpLEMENTArY FAMILY
The short, versatile WSK 702 VEA for working from a scaffold, and the revolutionary WS 702 VEA for fatigue-proof working on walls and ceilings.
starting page 78
76
Floor and wall finishing
A STrONG TEAM
FOr drY WALL
Orbital sander MS 713, longneck sander WS 702 VEA, industrial vacuum cleaner
S 36 and the perforated original FLEX Giraffe sandpapers – all this makes working much easier, quicker, neater, and healthier.
The patented original FLEX Giraffe sandpaper with perforations has an extremely strong base and top bond. This anchors the grit firmly and quite durably to the carrier material. crucial though are the punched out perforations and the special grit distribution of the sandpaper. They guarantee and increased material abrasion, an extended service life, and optimal dust extraction.
Dust extraction with non-perforated Velcro sandpaper:
Swarf is created during abrasion between the grit of the sandpaper and the surface being ground. If the sandpaper is not perforated the swarf can be extracted only at the edge of the backing pad. The consequence: The sandpaper gums up, the abrasion performance drops, an even grinding isn‘t possible anymore, and a lot of residue swarf remains on the sanded surface and the surroundings.
Dust extraction with patented FLEX Velcro sandpaper
with perforations across the whole surface: The swarf is extracted not only from the edge, but mostly through the holes. Gumming up is noticeably reduced, sanding performance is increased 4-fold. Beyond that the sanding surface remains dust-free to a large extent and can be worked on right away – wallpapered or plastered for instance. Less dust gets into the air and the lungs and even the clean-up effort is minimal.
Dust extraction with non-perforated Velcro sandpaper:
drive shaft Extraction of the swarf by the industrial vacuum cleaner
FLEX S 36
1
Dust extraction with patented FLEX Velcro sandpaper with perforations across the whole surface:
drive shaft Extraction of the swarf by the industrial vacuum cleaner
FLEX S 36
1
1
The outer brush ring prevents the swarf from being flung out, serves as a guide for a clean grinding surface pattern, and also ensures that enough air can be drawn in. A vacuum is thus prevented.
Backing pad
Velcro attachment
Velcro fleece
Sanding disc
Swarf
Brush ring
]
1
1
Sand paper
77
6
Long-neck and short-neck sanders
WS 702 VEA
259.385
ADVANTAGES AT A GLANCE
• FLEX VE electronic control: with infinitely-adjustable speed control
• Vacuuming system: with ring brush on the protective hood, flexible vacuum hose from the sanding pad to guiding pipe. Connection option for FLEX S 36 and S 36 M industrial vacuum cleaner on rear end of guiding pipe
• Velcro adapter: large surface, cushioned
• Easy guiding: by optimal balance between motor and grinding head
6
The FLEX Giraffe: the long-neck solution for sanding and polishing
The long-neck sander from FLEX has revolutionised drywall construction and surface preparation before wallpapering or plastering.
Three-metre high ceilings and surfaces can be reached without ladders or scaffolding. The dust nuisance when working over head and also the clean-up costs are reduced to a minimum. Because the patented dust extraction system does a thorough job. The articulating sanding head permits a neat finish and the backing pad is padded; grooves and scratches are thus avoided. The optimal weight distribution - sanding head in front, motor in rear - makes endurance jobs possible. And with FLEX sanding discs the application range knows no limits. So the Giraffe is employed not only in drywall construction and renovation, but also in vehicle, trailer, container, and ship building.
From the ceiling to the walls
The Giraffe makes interior work simply faster, cleaner, perfect. Long-neck sander
WS 702 VEA Giraffe
SPECIFICATIONS
Power input
Power output
Speed without load
Grinding disc Ø
Length
Weight
WS 702 VEA
400 Watt
200 Watt
1000-1650 rpm
225 mm
1580 mm
4,2 kg
STANDARD EQUIPMENT
1 adapter for Velcro sand paper 260.232
Velcro sand paper, grit 40
1 piece of 280.739
Velcro sand paper, grit 60
Velcro sand paper, grit 80
Velcro sand paper, grit 100
Velcro sand paper, grit 220
Velcro sanding, grit 80
4-m vacuum hose (32 mm Ø) with two adapters
3 Velcro cable clips
1 piece of 260.233
1 piece of 260.234
1 piece of 260.235
1 piece of 260.236
1 piece of 260.237
279.536
887.428
78
Floor and wall finishing
ADVANTAGES AT A GLANCE
• FLEX VE electronic control: with infinitely-adjustable speed control
• easy to guide: due to light weight, compact design and as standard bail handle
• Velcro adapter: large surface, cushioned
• Vacuuming system: with ring brush on the protective hood, flexible vacuum hose from the sanding pad to guiding pipe. Connection option for FLEX S 36 and S 36 M industrial vacuum cleaner on rear end of guiding pipe
WSK 702 VEA
326.437
Short-neck "Okapi", the short versatile complement to the Flex Giraffe
The Giraffe, the long-neck sander from FLEX has revolutionised drywall construction and surface preparation. 3m high ceilings and walls can be reached without ladders or scaffolding. The FLEX Giraffe family has now grown. When a compact, light weight, agile machine is needed then the new short-neck
Giraffe "Okapi" is the ideal compliment to the long-neck sander e.g when sanding walls and ceilings over 3 m high. When standing on scaffolding, ladders or in places with restricted movement, it allows hours of tireless working. The articulating sanding head reaches into all corners and angles. Patented dust extraction system for practically dust free working. With the wide range of Flex sanding discs for paint and varnish surface preparation, or for cleaning and polishing, the application range of these machines are limitless.
6
STANDARD EQUIPMENT
1 bail handle
301.825
1 adapter for Velcro sand paper 260.232
Velcro sand paper, grit 40
1 piece of 280.739
Velcro sand paper, grit 60
Velcro sand paper, grit 80
Velcro sand paper, grit 100
Velcro sand paper, grit 220
Velcro sanding, grit 80
4-m vacuum hose (32 mm Ø) with two adapters
3 Velcro cable clips
1 piece of 260.233
1 piece of 260.234
1 piece of 260.235
1 piece of 260.236
1 piece of 260.237
279.536
887.428
SPECIFICATIONS
Power input
Power output
Speed without load
Grinding disc Ø
Length
Weight
WSK 702 VEA
400 Watt
200 Watt
1000-1650 rpm
225 mm
990 mm
4,0 kg
79
Quality accessories for long-neck and short-neck sanders
Patented Velcro sanding media for the WS 702 VEA and
WSK 702 VEA, for the preperation of Drywall constructions for painting or varnishing
Velcro sand paper
For sanding polystyrene slabs (thermal protection)
Dimensions in mm
225 Ø
Grit grit 16
QP Order number
10 279.102
For rapid sanding and smoothing
Dimensions in mm
225 Ø
Grit grit 100
For universal sanding
Dimensions in mm
225 Ø
Grit grit 150
QP Order number
25 260.235
QP Order number
25 311.995
Velcro sanding grid
For rapid removal of surface irregularities
Dimensions in mm
225 Ø
Grit grit 80
For rapid removal of fine surface irregularities
Dimensions in mm
225 Ø
Grit grit 100
QP Order number
25 260.237
For sanding quick-bonding material
Dimensions in mm
225 Ø
Grit grit 220
QP Order number
25 260.236
QP Order number
25 260.230
Velcro sanding media for universal applications.
For cleaning, sanding and polishing with the
WS 702 VEA and the WSK 702 VEA
Velcro SiC (silicon carbide) sand paper sheet
6
Velcro sand paper (perforated)
For leveling coarse surface irregularities
Dimensions in mm
225 Ø
Grit grit 40
For leveling light surface irregularities
Dimensions in mm
225 Ø
Grit grit 60
Dimensions in mm
225 Ø
225 Ø
Grit
S 320
S 1200
QP Order number
25 280.739
Velcro sanding fleece
Dimensions in mm
225 Ø
225 Ø
Grit grit 100 grit 180
QP Order number
25 260.233
Velcro polishing sponge
QP Order number
10 281.026
10 281.018
QP Order number
10 281.042
10 281.034
For removing paint and paste
Dimensions in mm
225 Ø
Grit grit 80
QP Order number
25 260.234
Dimensions in mm
225 Ø
Grit soft
QP
5
Order number
280.992
80
QP = Quantity per package
Floor and wall finishing
Accessories long-neck sander WS 702 VEA and the short-necked sander WSK 702 VEA
Padded adapter for Velcro paper
Connection Industrial vacuum cleaner S 36 and S 36 M to WS 702 VEA and WSK 702 VEA
Vacuum hose
Velcro system for fixing the sanding medium
QP
1
Order number
260.232
Vacuum hose, 32 mm internal Ø, 4.0 m long, incl. coupling bush for vacuum (Order no. 328.308 + 882.428) and special adapter with metal ring (Order no. 890.961)
QP Order number
1 279.536
Bail handle
Special adapter
For effortless working in difficult positions (e.g. overhead work)
QP
1
Order number
301.825
with metal ring, for connecting the 32 mm vacuum hose to the original Giraffe and Okapi vacuum attachment
QP Order number
1 890.961
Padded carrying bag
The clean conveyor for the sander and accessories. Also protects against damage
QP
1
Order number
280.984
Adapter rotating
Adapter 32/32 mm, for connecting machines with 32 mm Ø vacuum attachment (e.g. renovation sanders, angle grinders with cutting guard) to 32 mm vacuum hose. Alternatively as vacuum adapter in connection with part number 882.428
QP Order number
1 328.308
6
Vacuum adapter
Adapter for S 36 and S 36 M to connect to vacuum adapter 264.709
or 328.308
QP Order number
1 882.428
81
They polish it off:
FLEX special machines for floor and wall working
82
Floor and wall finishing
Crucial for effective floor and wall working are the proper tools.
If the task is to mill wall grooves for in-wall installation of cables or duct works, to carry off plaster, cement, or screed, or to remove coatings and cement slurry coatings – FLEX has the right problem solution for every task.
The perfectly adapted extraction and filter system of the new special vacuum S 36 M prevents dust that is harmful to your health from getting in the surrounding air.
83
6
6
Application examples: Floor and wall finishing
CauTIon: operate plaster mill, renovation sanders, and wall chasers only with the industrial vacuum cleaner S 36 M.
Its highly effective fine filter system protects the operator from harmful dusts, the machine from abrasive particles, and the tools from too quick wear. Industrial vacuum cleaner S 36 M
on page 125 rIGhT up To ThE WaLL
The disc guard with removable edge segment makes it possible to grind right up to the wall. renovation sander
LdB 1709 Fr
on page 89 prECISIon aLonG aLL EdGES a variably-adjustable stop makes it possible to roughen slabs or steps exactly parallel to the outer edge.
The working width can be adjusted over several stages.
Bushhammer LST 1503 Vr
on page 91
GrIndInG and dESCaLInG
In an uprIGhT poSITIon
The WS 1505 Fr from our
Giraffe Family makes it possible to work without a ladder or scaffold.
on page 86
84
Floor and wall finishing
arMEd To ThE TEETh
35 toothed milling discs made of solid carbide alloy make short work of old plaster and carpet adhesive residues. Scouring machine hpI 603
on page 92
SIMpLE adjuSTMEnT oF ThE
GrIndInG dEpTh
The adjusting screw on the extraction hood can be used to set the grinding depth to a maximum of 5 mm.
rEnoVaTIon MadE EaSy
For smaller renovation jobs on your building, the
FS 3403 VrG is an irreplaceable assistant.
on page 92
6
85
Long-neck renovation grinder
WS 1505 FR
322.857
6
The long-neck renovation grinder for floors, walls and ceilings
From a normal standing position smoothing of floors, walls and ceilings - Surface cosmetics on concrete and screed achieved from a comfortable standing position this is the strength of the renovation grinder. As with the FLEX Giraffe, difficult areas can be reached without ladders or scaffolding.
Removing coverings and paint etc from floors, or roughing of screeds can be achieved without bending. Grinding of concrete seams and joints in high ceilings can be a quickly and cleanly finished without any
Acrobatics or safety net. Due to the integrated dust extraction system, elastic rubber vacuum ring on the guard and the FLEX S36 industrial cleaner the dust is completely removed, leaving a clean and healthy working environment. When grinding hazardous materials the special FLEX S 36 M with fine filter system and diffusor should be used.
SPECIFICATIONS
Disc Ø
Speed without load
Power input
Power output
Tool fixture
Length
Weight
WS 1505 FR
125 mm
5500 rpm
1010 Watt
600 Watt
28 mm Ø
1580 mm
7,0 kg
ADVANTAGES AT A GLANCE
• FLEX three-fold full-wave electronic control: consistent speed control by tachometer generator, soft start, overload protection
• Vacuum dust collection: protects against abrasive dust, reduces disc wear, keeps concrete pores for the new coat open
• Bail handle for easy guidance of the machine and less effort in difficult working position (e.g. overhead working)
• Flexible rubber vacuum ring: moves smoothly over the surface and protects against dust and stones flying out
• Dust extraction-system: with elastic rubber vacuum ring on the guard, flexible hose from the guard to the main support tube. At the rear of the main support tube it is possible to connect the S 36 or S 36 M using the Special adapter 890.961
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
A perfect combination
The long-neck renovation sander with 3-D movement and its especially developed light weight Diamond disc. Bumps and ridges on Walls, Floors and Ceilings are quickly and easily eliminated.
STANDARD EQUIPMENT
1 Concrete-Whirljet 125 Ø
1 FixTec quick-clamp nut M 14
Guard
Bail handle
Cable clip
4-m vacuum hose (32 mm Ø) with two adapters
Padded carrying bag
323.063
313.459
254.213
301.825
302.538 (3x)
279.536
280.984
86
Floor and wall finishing
Rubber extraction rings
Accessories for long-neck renovation grinder
WS 1505 FR
Dry grinding diamond cups
Thermo-whirljet for thin coatings and lightly abrasive materials:
Thermoplastic coatings, Paint, Graffiti, thin glue residues on concrete or screed, Rubber based coatings. Reduced weight with the
FLEX flange. Only to be used on the FLEX long-neck renovation
grinder. The grinding disc with the angular arranged diamond segments allows for a quicker work rate than with normal disc. The large dimensioned delta shaped holes in the discs causes an air vortex that removes all dust from the working surface and prevents the segments from clogging or overheating and so reducing wear.
The leight weight disc reduces wear on the motor. Not for use on
edges.
Padded carrying bag
The flexible rubber vacuum ring moves smoothly over the surface and provides optimum protection against dust and stones flying out.
Dimensions in mm
125 Ø
QP
1
Order number
257.246
The clean conveyor for the sander and accessories. Also protects against damage
QP Order number
1 280.984
Dimensions in mm
125 Ø
QP
1
Order number
323.071
Screed-Whirljet for abrasive materials: Abrasive screeds (with quartz sand), fresh concrete, plaster, mortar, abrasive limestone
(with quartz sand) sandstone, fire clay, asphalt. Reduced weight,
with FLEX special flange - only to be used on the FLEX longneck renovation grinder. Not to be used for working on edges.
Dimensions in mm
125 Ø
QP
1
Order number
324.361
6
Concrete-Whirljet the grinding disc for concrete: old concrete, concrete slabs and stone - natural and artificial slabs, lime sand brick hard, paving slabs, tile glue, removing glazing from ceramic tiles. Reduced weight, with the FLEX special flange - only to be
used on the FLEX long-neck renovation grinder. Not to be used on edges.
QP Dimensions in mm
125 Ø 1
Order number
323.063
QP = Quantity per package
87
Renovation sanders
LD 1709 FR
256.486
LD 3206 C
303.798
6
The FLEX diamond renovation sander for surfaces
This renovation sander removes layers and concrete slurry coatings really quickly, thanks to the FLEX Thermojet Super diamond grinding pads. It does not rasp or jump, making it ideally suitable for both precision work and large surface removal. The effective turbo vacuum attachment prevents concrete pore clogging. Smearing and sticking is avoided.
The surface underground structure is improved during grinding and work accomplished twice as quickly. The innovative dust evacuation guard with a detachable flexible brush ring permits to grind right up to the wall.
SPECIFICATIONS
Disc Ø
Speed without load
Power input
Power output
Tool fixture
Weight
LD 1709 FR
125 mm
10000 rpm
1400 Watt
950 Watt
M 14
2,9 kg
The big FLEX renovation sander for surfaces
This renovation sander removes layers and concrete slurry coatings really quickly, thanks to the FLEX Thermojet Super diamond grinding pads. It does not rasp or jump, making it ideally suitable for both precision work and large surface removal. The effective turbo vacuum attachment prevents concrete pore clogging. Smearing and sticking is avoided.
The surface underground structure is improved during grinding and work accomplished twice as quickly. The innovative dust evacuation guard with a detachable flexible brush ring permits to grind right up to the wall.
SPECIFICATIONS
Disc Ø
Speed without load
Power input
Power output
Tool fixture
Weight
LD 3206 C
180 mm
6500 rpm
2500 Watt
1700 Watt
M 14
7,6 kg
STANDARD EQUIPMENT
Thermojet Super 125 Ø
Clamping nut
Clamping flange SW 14
Guard
Bail handle
Cable clip
Hose clip
Vacuum ring
304.727
100.080
191.612
254.213
236.934
252.188 (3x)
252.050
257.246
1 hexagon socket screw key, special tool 4 102.229
Wrench holder
233.943
1 pin wrench
1 metal carrying case
107.492
306.207
88
STANDARD EQUIPMENT
Thermojet Super 180 Ø
Clamping nut
Clamping flange SW 17
Guard
Bail handle
Cable clip
303.461
100.080
191.604
258.625
302.708
302.538 (3x)
Vacuum ring
258.626
1 hexagon socket screw key, special tool 6 256.832
1 pin wrench
1 pin spanner
1 plastic carrying case
100.110
258.629
329.908
ADVANTAGES AT A GLANCE
• Vacuum dust collection: protects against abrasive dust, reduces disc wear, keeps concrete pores for the new coat open
• Flexible rubber vacuum ring: moves smoothly over the surface and protects against dust and stones flying out
• Vacuum attachment: 32 mm exterior Ø
• Spindle lock: for easy disc changes
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
ADDITIONALLY FOR LD 1709 FR
• FLEX four-fold FR electronic control: with consistent speed control by tachometer generator, soft start, overload protection and temperature monitoring
Floor and wall finishing
ADVANTAGES AT A GLANCE
• FLEX four-fold FR electronic control: with consistent speed control by tachometer generator, soft start, overload protection and temperature monitoring
• Vacuum dust collection: protects against abrasive dust, reduces disc wear, keeps concrete pores for the new coat open
• Spindle lock: for easy disc changes
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• Protective guard: removable edge segment for close wall grinding
• Vacuum attachment: 32 mm interior Ø
(suitable for universal adapter
259.827)
LDB 1709 FR
305.014
The FLEX diamond renovation sander for close wall grinding
Using the FLEX Thermojet Super diamond backing pads this renovation sander removes all coatings and cement slurry coatings super fast. And since it neither grates nor skips it is suitable for punctiform jobs as well as for milling larger surfaces. The effective turbo dust extraction prevents the clogging of concrete pores. Nothing smears - nothing sticks.
Thus you refine the base already when you are sanding it off, doing two jobs in one. The new type of extraction hood with flexible, removable brush ring makes it possible to sand right up to the wall when a segment is removed.
6
SPECIFICATIONS
Disc Ø
Speed without load
Power input
Power output
Tool fixture
Weight
STANDARD EQUIPMENT
Thermojet Super 125 Ø
Clamping nut
Disc guard with removable edge segment
Bail handle
Cable clip
Hose clip
1 hexagon socket screw key, special tool 2.5
Wrench holder
1 pin wrench
1 metal carrying case
LDB 1709 FR
125 mm
10000 rpm
1400 Watt
950 Watt
M 14
2,9 kg
304.727
100.080
305.235
236.934
252.188 (3x)
252.050
162.531
233.943
107.492
306.207
89
Quality accessories for renovation sanders
6
Dimensions in mm
Accessories for renovation sanders LD 1709 FR, LDB 1709 FR and LD 3206 C
Dry grinding diamond cups
Thermojet Super for surface grinding on thermo-plastic layers, coated sidewalk plates, for balcony and concrete renovation. The ingenious backing pad with the angled diamond segments in double rows ensure a roughly 30% faster work progress as compared to conventional backing pads. Thanks to the high number of specially shaped segments and the oval and patented turbo extraction bore holes (on the 125 pad) an ultra-strong air suction is created. It extracts the aggressive swarf, prevents the plugging and overheating of the segments and reduces the wear. No pre-sanding necessary. Calm, reducedvibration operation due to precise balancing. No hooking on rough surfaces. Not suited for
working on edges.
125 Ø
180 Ø
Screed Jet for levelling screed. Accessory for the
FLEX cement grinder for levelling and removing screed. For sanding down sandstone. Fast work because of strong diamond segments that are embedded in rip-proof elastic support linings.
125 Ø
180 Ø
Concrete Jet for surface grinding cement. The strong diamond segments are embedded in ripproof elastic support linings. For extended service life and reduced vibration run.
125 Ø
QP Order number
1
1
304.727
303.461
■ ■ –
– – ■
1
1
252.452
259.248
■ ■ –
– –
■
1 258.637
■ ■
–
Rubber extraction rings
The flexible rubber vacuum ring moves smoothly over the surface and provides optimum protection against dust and stones flying out.
125 Ø
180 Ø
Disc guard with removable edge segment
Retrofitting kit, consisting of a protective guard with removable edge segment and special clamping flange SW 14 (Order no. 305.022).
125 Ø
Plastic Multi-Carry case
Perfect fitting, impact resistant carry case, universally adaptable for many different
FLEX-Maschines
90
1
1
257.246
258.626
■
– –
– – ■
1 305.235
■ – –
1 329.908
– – ■
QP = Quantity per package
Floor and wall finishing
Bushhammers
ADVANTAGES AT A GLANCE
• FLEX four-fold full-wave electronics: with speed selection and consistent speed control, soft start, overload protection.
• Stop: stepless adjustable for precise work
• Dust extraction: for use even in occupied buildings
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
ADDITIONALLY FOR LST 1503 VR
• Working width adjustable: 3 stages from about 40 mm up to about 92 mm.
ADDITIONALLY FOR LST 803 VR
• Working width adjustable: 7 stages from about 55 mm to about 130 mm.
LST 1503 VR
259.229
LST 803 VR
259.639
Bushhammering prevents slippage
Smooth natural stone floors can turn into slippery danger zones in wet weather.
Roughening helps alleviate this problem and ensures better traction. In the past this was difficult once the natural stone slabs had been set. But with the FLEX bushhammers this job is taken care of in just a few minutes even on the hardest granite surfaces.
Accessories for FLEX bushhammers
Spare HM discs: for LST 1503 VR: 6 pieces,
Order no. 259.833; for LST 803 VR: 8 pieces,
Order no. 259.834;
Spare mounting with 2 HM wheels for
LST 1503 VR and LST 803 VR:
Order no. 260.576
The small FLEX bushhammer for stairs
60 aggressive hard-metal tips of the machine take care of the job quickly and with precision. The rotating bushhammer with the hard-metal discs is born by rubber shock absorbers which reduces vibration and is easy on your joints. The machine can be expertly guided by the grip hood.
The big FLEX bushhammer for stairways and larger surfaces
80 rubber-born hard-metal tips make this big one the fast tool for roughening up natural stone floors. Since the applied pressure is put right from the grip hood onto the tool head below it, the machine rests perfectly in your hand while under full power.
SPECIFICATIONS
Speed without load
Power input
Power output
Working width
Weight
LST 1503 VR
800-2400 rpm
1200 Watt
700 Watt
40-92 mm
5,9 kg
SPECIFICATIONS
Speed without load
Power input
Power output
Working width
Weight
LST 803 VR
800-2400 rpm
1800 Watt
1200 Watt
55-130 mm
7,2 kg
6
STANDARD EQUIPMENT
1 grip cover
1 stop, complete
1 carbide tipped complete 100 Ø
253.676
259.193
261.653
1 hexagon socket screw key, special tool 5 115.460
1 pin wrench
100.110
STANDARD EQUIPMENT
1 grip cover
1 stop, complete
1 carbide tipped complete 140 Ø
253.676
259.193
261.654
1 hexagon socket screw key, special tool 5 115.460
1 pin wrench
100.110
91
Renovation scouring machines
FS 3403 VRG
333.611
New
HPI 603
256.584
6
The handy FLEX scouring machine for renovation work
The small milling machine is suited to various tasks which arise during renovations, such as removing old plaster of up to 5 mm in thickness, milling the edges of concrete casings and mending small areas of insulation façades. The specially developed milling axle mounting guarantees even contact and uniform wear of the milling discs. This ensures the longest possible service life for the milling discs. Thanks to its modest weight it is also ideal for working over your head.
SPECIFICATIONS
Milling head Ø
Working width
Max. milling depth
Speed without load
Power input
Power output
Weight
STANDARD EQUIPMENT
12 flat tooth milling disc
1 bail handle
1 hexagon socket screw key
1Torx-wrench
1 metal carrying case
FS 3403 VRG
85 mm
76 mm
5 mm
1100-3700 rpm
1400 Watt
880 Watt
3,0 kg
333.719
298.506
1 piece
1 piece
334.073
The FLEX scouring machine clears plaster, concrete and screed
This powerful milling machine is ideal for preparing large surfaces, removing plaster, roughing concrete or leveling shuttering joints and screed. Two handles facilitate guiding and go easy on the joints, while seven scouring axes enable a high level of material removal.
SPECIFICATIONS
Milling head Ø
Max. milling depth
Speed without load
Power input
Power output
Weight
STANDARD EQUIPMENT
28 flat toothed milling discs
1 side handle
1 socket wrench
1 tommy bar
1 pull-off fixture
1 Adapter 32/36 mm Ø
1 metal carrying case
HPI 603
150 mm
5 mm
2400 rpm
1200 Watt
700 Watt
6,8 kg
256.587
256.799
256.801
256.808
256.807
257.169
1 piece
ADVANTAGES AT A GLANCE
• Vacuum hood: with stepless height adjustment
• Sturdy milling discs: from high quality solid carbide alloy
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
ADDITIONALLY FOR FS 3403 VRG
• FLEX Six-fold microprocessor electronics: Speed selection, consistent speed control by tachometer generator, soft start, restart protection after power interruption, overload protection, and temperature monitoring
• Optimal milling axle mounting: for the maximum service life of the twelve milling discs
• Vacuum attachment
ADDITIONALLY FOR HPI 603
• Possible to connect external dust extractor using the supplied as standard adapter
• 7 milling axes with 28 flat-toothed milling discs
92
Floor and wall finishing
Accessories for renovation scouring machines
Accessories for FS 3403 VRG
Carbide pointed tooth milling discs
12 flat milling discs for replacement, made of solid carbide alloy.
For light, soft plaster. Also for removing carpet adhesive residues when a clean, smooth base is required.
QP
12
Order number
333.719
Accessories for HPI 603
Carbide pointed tooth milling discs
28 replacement flat milling discs, solid carbide. For light soft plaster and removing carpet adhesive residues when a clean smooth surface is required.
QP Order number
28 256.587
12 pointed milling discs for replacement, made of solid carbide alloy. For removing hard plaster and cement. For removing carpet adhesive residues when a roughened base is required.
QP
12
Order number
333.700
Milling head complete
To switch quickly from sharp to flat milling discs. Complete with twelve flat HM milling discs (order number 333.719).
QP
1
Order number
333.697
35 replacement pointed solid carbide milling discs for removing hard plaster and cement. Also for removing carpet adhesive residues when a roughened surface is required.
QP Order number
35 256.589
6
To switch quickly from flat to sharp milling discs. Complete with twelve sharp HM milling discs (order number 333.700).
QP
1
Order number
333.689
QP = Quantity per package
93
6
Application examples: wall chaser
coMplete kit plastic carrying case and two diamond Jet vi-speedcut cutting discs for rapid cutting of masonry, limestone and porous concrete.
powerFul in every position the wall chaser Ms 1706 Fr cuts grooves effortlessly into walls, limestone and porous concrete. its patented, swivelling motor makes horizontal push cutting as well as vertical pull cutting possible.
Milling cuts with 2 parallel running FleX high-per-
ForMance diaMond cutting discs the middle partition can then be broken out using the supplied slot breaker. wall chaser
Ms 1706 Fr-set
on page 96
94
Floor and wall finishing
Microscopic imaging of a conventional diamond cover clearly shows insufficient integration of the diamond grain into the bond, as well as cavities in the binding system. this leads to premature breaking of the grain and a large amount of wear and tear.
diamond
Microscopic image of the diamantjet vi - speedcut with
HDS
technology. the binding components are very homogeneous and show high density as well as complete integration of the diamond grain. this means the diamond lasts a long time and is used to its full potential. a long life and good cutting are guaranteed.
accessories on page 97 easy disc eXchange and width adJustMent the disc guard can be opened and the quick-clamp nut can be loosened without any additional tools. in this way you can switch the diamond cutting discs and quickly re-arrange the distance rings according to the desired groove width.
6
95
Wall chaser
MS 1706 FR-Set
329.673
New
6
The new FLEX wall chaser for push and pull cutting
The unique rotating motor system allows the machine to be used for pull cutting for vertical slots, and push cutting for horizontal slots. Now wall chasing for the laying of cables or conduits is childs play. Cuts two parallel slits up to 35 mm deep and 30 mm wide. The new MS 1709 FR when combined with the Flex S 36 M vacuum cleaner gives optimal dust protection for the user even when plunge cutting.
SPECIFICATIONS
Cutting depth
Groove width
Disc Ø
Speed without load
Power input
Power output
Tool fixture
Weight
MS 1706 FR-SET
0-35 mm
10-30 mm
140 mm
7500 rpm
1400 Watt
950 Watt
M 14
3,7 kg
STANDARD EQUIPMENT
Diamantjet VI-Speedcut-cutting disc 140 mm Ø
334.464 (2x)
1 side handle
194.034
1 SDS-Clic quick-clamp nut M 14
253.049
Distance spacers
Clamping flanges
1 web remover
1 adapter for dust extractor
Cable clip
1 plastic carrying case
318.914 (5x)
191.612 (2x)
229.253
327.026
252.188 (3x)
327.034
ADVANTAGES AT A GLANCE
• FLEX four-fold FR electronic control: with consistent speed control by tachometer generator, soft start, overload protection and temperature monitoring
• Rotating motor allows for push and pull cutting
• Optimal dust extraction and maximum safety due to enclosed guard
• Toolless blade changing and slit width adjustment
• Rotating adaptor for dust extractor
• Adjustable cutting depth
• Plunge cut stop
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
• Complete kit: with plastic carrying case and 2 Diamond Jet VI- Speedcut discs for rapid cutting of masonry, limestone, concrete and porous concrete
The patented turn
It's only possible with the FLEX wall chaser, pull cutting for vertical and push cutting for horizontal slots. Just unlock, swivel the motor, lock - finished!
Rotating vacuum adapter
According to the direction you are working in, the hose of the FLEX industrial vacuum cleaner can be fed through the rotatable nozzle so that it does not hinder the user.
Easy cutting depth adjustment
You can use the scale - which is divided into 5 mm increments - on the disc guard to set how deep the milled cut should be.
96
Floor and wall finishing
Dimensions in mm
Accessories for wall chaser MS 1706 FR-Set
Diamond Jet II - high-performance diamond discs in silver
For tiles and bonded ceramic materials. Suitable for very accurate, sharp-edged cuts.
140 Ø
Diamond Jet IV
For rapid cutting of masonry, limestone and concrete. Particularly hard, with large segment spacing for improved cooling and optimum dust ejection.
140 Ø
Diamantjet VI - Speedcut
For cuts in walls, limestone, concrete and gas concrete. Thanks to the innovative HDS (high density sintered) technology, which can be recognised by the high density and homogeneity of the binding components, the Speedcut cutting disc stands out due to its uniform willingness to cut, its long life span and the overheating protection it offers. Due to the ribbed cover, only minimal pressure needs to be applied and the swarf is removed quickly: the workpiece is sliced through cleanly and smoothly.
Sharpening stone for diamond tools
140 Ø
320 x 160 x 30
QP Order number
1 252.290
■
1 303.593
■
1 334.464
■
1 251.756
■
6
QP = Quantity per package
97
Whether power from the mains or the battery pack:
FLEX tools got the power
98
Screwdrivers, drills, hammers
FLEX screwdrivers, drills and hammers are real power packs.
Designed for professional continuous operation constructed appropriately robust – for example solid, yet light aluminium gear housing and fully-metal drill chucks on the cordless drills and hammer driver drills ensure enduring stability and long service lives.
And the user friendliness is exemplary: Grip modules that can be adapted individually to various hand sizes. Or especially sensitive accelerator trigger switchs with quick stop.
The list of examples could be continued.
You see: FLEX wants to make sure you will enjoy using your machines for a long time.
7
99
Application examples: screwdrivers, drills and hammers
7
VErsATiLiTY is THE cLincHEr
– FOr insTAncE FOr bATHrOOm rEnOVATiOn
Drilling or screwing, rotary hammering or chiselling – the synchronised switch with turn-stop makes it possible.
PErFEcT ErGOnOmics
With grip-to-fit, the exchangeable grip modules for each hand size. With handle on the side that provides you with a secure grip even at great torques. And with perfect balance for unerring work with nearly no fatigue. cordless drills and rotary hammer drill-screwguns
starting page 102
PErFEcT bALAncE FOr unErrinG WOrk
The central grip position right behind the hammer mechanism and the balanced weight distribution make it possible to drill perpendicular bore holes perfectly.
Hammer and chisel drill brL 3501 A
on page 103 rObusT mETAL cHuck
The carbide clamping jaws in the AcH 14 and AcH 19 don‘t let loose even during hammer drilling. The firm grip of the chuck prevents slipping during tightening.
100
Screwdrivers, drills, hammers
1 2 3 4 5 6
7
8
9
1 Carbide clamping jaw
Low-wear for long service life and firmer grip of the tool, especially during hammer drilling (on AcH 14 and AcH 19).
10
2 Single-piece, fully-metal, quick-clamp chuck, 13 mm
For quick and easy tool exchange with one hand: Auto spindle lock. Locking and release mechanism with audible click. This avoids unintentional release during vibrations, with quick-release function.
11
3 Increased torque, pre-selectable
22 torque settings, additional hammer drill level
(on AcH 14 and AcH 19). For turning in thicker and longer connection elements in harder material.
12
4
5
6
7
8
Attachment point for side handle
screw in on right or left. For better control on jobs with great torques. Handle is supplied with AcH 14 and AcH 19.
9
10
Aluminium gear housing
Ensures stability and long service life.
Two-speed planetary gears
robust, for high and low speeds. broad speed range from 0 to
1400 rpm maximum.
Integrated bit holder
On each side, including a screwdriving bit.
Reversible
middle setting: safety lock for safe tool changing and transport.
11
12
Accelerator trigger switch with quick stop
For sensitive tasks and rapid screwing in succession.
Grip-to-fit (GTF)
new type of grip exchange system, consisting of
3 different-sized, padded grip modules to adapt individually to all hand sizes.
Segmented handle padding
Protects against slipping, reduces vibration.
NiCd battery
up to 3000 recharges. simple exchange with a snap-on mechanism. Even the battery packs of previous models can be used (Ab 12; AbH 14.4; AbH 19.2). included: universal 1h rapid charger for battery packs from 12 V–19.2 V.
LiGHTs On WiTH AuXiLiArY bATTErY PAck
The standard auxiliary battery pack can be used for illumination with the appropriate
FLEX cordless lamp. 12 V lamp is supplied along with the Ac 12. cordless lamps:
12 V: Weight: 950 g, Order no. 280.976
(replacement bulbs: 290.250)
14.4 V: Weight: 1100 g, Order no. 280.968
(replacement bulbs: 284.912)
19.2 V: Weight: 1360 g, Order no. 280.941
(replacement bulbs: 284.920)
7
TimE is mOnEY!
FLEX universal rapid charger charges all FLEX battery packs from 12
V to 19.2 V within an hour. With automatic temperature and charge control. Also for battery packs of previous models
(Ab 12; AbH 14.4; AbH 19.2).
101
Cordless machines, Hammer Drill
AC 12
304.344
ACH 14
304.352
The FLEX cordless driver drill with
12 V/2.0 Ah
The grip-to-fit function means that this handy machine can be adapted to suit dainty feminine hands as flexibly as heavy masculine ones! The extremely powerful 12 V motor makes it ideal for medium to extreme drilling and screwdriving applications. A FLEX 12 V cordless lamp is included as a standard accessory.
The FLEX cordless hammer driver drill with 14.4 V/2.0 Ah
This powerful machine is used for difficult screwdriving, drilling and hammering work.
Its compact design makes it the primary choice for confined areas and particularly easy to guide. With extreme torque for large screw and drill diameters.
7
SPECIFICATIONS
Battery voltage
Battery capacity
Torque adjusting range
Torque positions
Max. torque soft/hard
Speed without load 1st gear
Speed without load 2nd gear
Max. drill hole Ø in steel
Max. drill hole Ø in wood
Chuck Ø
Weight with battery
AC 12
12 V
2 Ah
1-16 Nm
22
27/59 Nm
0-425 rpm
0-1300 rpm
13 mm
36 mm
1,5-13 mm
2,3 kg
SPECIFICATIONS
Battery voltage
Battery capacity
Torque adjusting range
Torque positions
Max. torque soft/hard
Speed without load 1st gear
Speed without load 2nd gear
Idle blows 1st gear
Idle blows 2nd gear
Max. drill hole Ø in steel
Max. drill hole Ø in stone
Max. drill hole Ø in wood
Chuck Ø
Weight with battery
ACH 14
14,4 V
2 Ah
1-19 Nm
22
30/63 Nm
0-450 rpm
0-1400 rpm
6000 rpm
18200 rpm
13 mm
13 mm
40 mm
1,5-13 mm
2,6 kg
STANDARD EQUIPMENT
Battery pack
280.747 (2 x)
1 universal 1 hour rapid battery charger
304.379
1 screwdriver bit
895.517
1 cordless lamp for 12 Volt
1 plastic carrying case
280.976
1 piece
STANDARD EQUIPMENT
Battery pack
280.755 (2 x)
1 universal 1 hour rapid battery charger
304.379
1 screwdriver bit
895.517
1 side handle
1 plastic carrying case
305.189
1 piece
ADVANTAGES AT A GLANCE
• Solid metal quick-action chuck: for rapid tool changing, with automatic spindle lock
• Grip-to-fit: 3 different handle modules to suit every hand size
• Aluminum gearbox: for a long service life
• 2-speed planetary gearbox: sturdy, for high and low-speed applications
• Clockwise and counterclockwise rotation: middle setting: safety blocking
• Accelerator trigger switch with quickstop for sensitive applications and screwdriving in rapid succession
• Spacious, unbreakable carrying case with metal latches: lots of room for the complete standard equipment as well as for further bits.
ADDITIONALLY FOR ACH 14
• Carbide chuck: for a long service life and firmer grip of the tool
• Additional hammer-action: for drilling roof tiles and masonry
• Side handle: can be fitted on both sides. For improved control during difficult screwdriving applications and extreme torques
• Compact design: perfectly balanced to facilitate guiding
102
Screwdrivers, drills, hammers
ADVANTAGES AT A GLANCE
ACH 19
• Solid metal quick-action chuck: for rapid tool changing, with automatic spindle lock
• Grip-to-fit: 3 different handle modules to suit every hand size
• Aluminum gearbox: for a long service life
• Carbide chuck: for a long service life and firmer grip of the tool
• Additional hammer-action: for drilling roof tiles and masonry
• Side handle: can be fitted on both sides. For improved control during difficult screwdriving applications and extreme torques
• Compact design: perfectly balanced to facilitate guiding
• 2-speed planetary gearbox: sturdy, for high and low-speed applications
• Clockwise and counterclockwise rotation: middle setting: safety blocking
• Accelerator trigger switch with quickstop for sensitive applications and screwdriving in rapid succession
• Spacious, unbreakable carrying case with metal latches: lots of room for the complete standard equipment as well as for further bits.
BRL 3501 A
• 700 Watt high-power motor: with powerful 2,9 Joule impact energy
• Hammer mechanism: for effortless drilling and chiselling
• Quick tool change: universal application, with SDS Plus drill chuck or 13 mm quick-release chuck incl. screw adapter
• Right/left rotation: for turning screws in and out
• Accelerator trigger switch: for sensitive working even when wearing work gloves
• Safety ratchet coupling: protects the user in case the drill blocks
• Hammer-stop: for non-hammering when screwing or drilling with the quick-release chuck
• Softgrip handle: made of special plasticrubber composite material for a non-slip grip and precise, low-vibration drilling
• Depth limit gauge: for precision drilling
• Heavy-duty carrying case: lots of room for standard equipment and accessories
ACH 19
304.360
BRL 3501 A
309.907
The FLEX cordless hammer driver drill with 19.2 V/2.4 Ah
This powerful machine packs a punch and demonstrates impressive endurance when it comes to the most difficult screwdriving, drilling and hammering work. Its compact design makes it easy to guide. With enormous torque for large screw and drill diameters.
The 700 Watt rotary hammer drill with double ventilator
Now powered by a 700 Watt motor and powerful 2.9 Joule impact energy. The central grip position of the spade handle and the robust rotary hammer mechanism of the new
FLEX rotary hammer drill provide an optimal weight balance and an extremly fast drill advance. Optimal motor and gear cooling by integrated dual ventilator. With turn-stop lock for chiselling work.
SPECIFICATIONS
Battery voltage
Battery capacity
Torque adjusting range
Torque positions
Max. torque soft/hard
Speed without load 1st gear
Speed without load 2nd gear
Idle blows 1st gear
Idle blows 2nd gear
Max. drill hole Ø in steel
Max. drill hole Ø in stone
Max. drill hole Ø in wood
Chuck Ø
Weight with battery
ACH 19
19,2 V
2,4 Ah
1-21 Nm
22
37/68 Nm
0-450 rpm
0-1400 rpm
6500 rpm
19500 rpm
13 mm
13 mm
45 mm
1,5-13 mm
3,0 kg
SPECIFICATIONS
Speed without load
Idle blows
Max strength of single blow
Tool fixture
Max. drill hole Ø in steel
Max. drill hole Ø in concrete
Max. drill hole Ø in wood
Power input
Power output
Chuck Ø
Weight
BRL 3501 A
0-1050 rpm
0-4270 rpm
2,9 J
SDS-plus
13 mm
26 mm
30 mm
700 Watt
300 Watt
13 mm
3,1 kg
7
STANDARD EQUIPMENT
Battery pack
304.719 (2 x)
1 universal 1 hour rapid battery charger
304.379
1 screwdriver bit
895.517
1 side handle
1 plastic carrying case
305.189
1 piece
STANDARD EQUIPMENT
1 Softgrip handle
1 drill depth stop
1 screw adapter 1/4"
1 quick-clamp chuck Ø 1.5-13 mm
1 plastic carrying case
310.301
272.604
272.620
272.639
310.409
103
Called for in sensitive areas:
FLEX core drill technology for vibration-free jobs
104
Core drill technology
Where drilling with low noise, little dust, and reduced vibration is required, that is where FLEX core drill technology goes to work.
Without hammering or with soft hit mode a cement core is milled out with absolute precision and reinforcements are no hindrance. Ideal for drilling and break-through work in sensitive areas such as hospitals, laboratories, computer facilities, office buildings, and schools.
Accelerate – drill through, without disruption!
8
105
System overview:
Core drilling machines | Core drill units | Blind hole drills
Core drilling machines, hand-held Core drill units
UNIt
8
MACHINE
StAND
ACCES-
SorIES
BH 612 VR
333.255
BHi 822 VR
Dry drilling without extraction
315.621
BHW 812 VV
277.940
BED 18
290.300
BHW 1549 VR
304.026
X
BD 18
290.343
X
SDS centring drill chuck
5/8”-16 UN / M 16
250.529
SDS centring drill
250.530
Diamond core drill dry,
M 30 x 2 see page 119
Vacuum hose Ø 32
297.011
Dry/wet vacuum cleaner
S 36 and S 36 M
297.003 / 319.252
Hollow diamond drill bit from 6-14 mm Ø
Wet drilling without extraction Wet drilling with extraction
M 16 drill bit see page 118
Dry drilling with vacuum extraction and M 30 x 2 drill bits.
Adapter 5/8”-16 UN / M 16
255.424
Extraction rotor M 16 / M 30 x 2
251.568 see page 119
Centring cross 251.569 see page 119
Clamp with spot-drilling aid
259.491
X
G 1/2” drill bits, wet for concrete and natural stone see page 116
Vacuum hose
255.505
Adapter for vacuum extraction
255.507
Water collector ring with spot-drilling aid | 255.036
G 1/2” drill bits, wet for concrete and natural stone see page 116
Vacuum hose
255.505
Adapter for vacuum extraction
255.507
Dry/wet vacuum cleaner S 36 and
S 36 M
297.003 / 319.252
Dry/wet vacuum cleaner S 36 and
S 36 M
297.003 / 319.252
X
Included with standard equipment
106
Core drill technology
Core drill units Blind hole drills
BED 55
257.081
BSW 1513 VR
256.666
X
BD 05
254.436
X
G 1/2” drill bits, wet for concrete and natural stone see page 116
BED 163
257.124
BSW 2123 C
256.840
X
BD 160
256.955
X
Wet drill bits for concrete | see page 116 transport carriage
258.864
VP 5 Vacuum pump
259.458 | see page 115
Quick-clamp post 250 cm
253.514
Fastening set with
25 drive-in dowels
329.606 see page 119
Conversion kit for vacuum attachment | 256.959 | 258.854
Water collector ring, complete for drill
Ø up to 130 mm | 257.076
Dry/wet vacuum cleaner
S 36 and S 36 M
297.003 / 319.252
rubber cap for 130 mm Ø
256.958
WD 10 Portable pressurised water tank | 251.622 | see page 115
BED 303
258.782
BSW 3023 C
265.616
X
BD 300
258.783
X
BED 69
254.175
BSW 1549 VR
299.189
X
BD 06
254.186
X
BHW 1549 VR
299.197
Diamond blind hole drill from
5-10 mm Ø | see page 117
Hollow diamond drill bit from
6-14 mm Ø | see page 117
107
8
Application examples: Core drill technology
8
Most
Most fav our able fav and speed able lightly speed range reinf range orced for heavily for concr non-r ete reinf orced einf orced concr ete and natur al
108
Diameter of the diamond drill bit (mm)
StANDArDS For oPtIMAl SPEEDS
For non-reinforced and lightly reinforced concrete the upper speeds are valid from the most favourable range. the lower speed values are valid for heavily reinforced concrete. too low speeds mean slow drill advance. too high speed means unnecessary great wear.
Always use water cooling when working in cement.
the greater the drill diameter, the more rinsing water is necessary. And always with sufficient water pressure to flush out all drilling sludge, otherwise the diamond coating wears off. Exception: the new BHI 822 Vr can also drill dry in concrete. the switchable soft hit mode quickly and completely removes the bore dust from the bore hole.
The drilling pressure „should not be too high. Slow down the drill advance in reinforced concrete; work with low speed in heavier reinforcement.“
in case diamond segments come off, turn in the segments along with the drill bit for repair. Never drill in a hole with broken off segments in it.
Drill cores jammed into drill bits have to be pressed out upwards.
Don‘t use a hammer. It could dent the drill bit and jam the core in rock-solid. Diamond segments could break off.
if drill bit is loaded, briefly drill into a sharpening stone, then it draws through again.
FLEX accessories core drill technology starting page 116
Core drill technology
ADVANTAGES AT A GLANCE
• FLEX seven-fold microprocessor electronics: with consistent speed control by tachometer generator, soft start, accelerator trigger switch, restart protection after power interruption, overload protection, temperature monitoring, and speed selection
• Two-gear transmission: for speed-compatible working
• Additional handle: rotating auxiliary handle with stops to prevent turning
• Safety slip clutch: offers protection if the core drill is jammed
• Depth limit gauge: for precision drilling
• Machine connection: 5/8" 16 UN
• Clamping neck: 53 mm, suitable for application in drilling stands
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
ADDITIONALLY FOR BHI 822 VR
• Switchable soft hit mode for working in concrete without water supply
• Drill bit adapter: M 16
BH 612 VR
333.255
New
BHI 822 VR
315.621
The robust compact core drilling machine for dry drilling
The newest entry in the FLEX dry drilling system can drill up to 120 mm into walls without hammering, thanks to its proven gear technology. Accessories broaden the use of the basic model - customised for electrical installation, for example. This facilitates dust-free work and faster progress.
SPECIFICATIONS
Power input
Power output
Machine connection
Speed under load 1st/2nd gear
Nominal torque 1st/2nd gear
Max. drilling Ø masonry
Weight
BH 612 VR
1500 Watt
1000 Watt
5/8"-16 UN
0-1000 / 0-2500 rpm
9,5 / 3,8 Nm
120 mm
4,1 kg
The FLEX core drilling machine for dry drilling with switchable soft hit mode
This versatile tool can dry drill masonry and now even concrete walls. In masonry it is ideal for non-hammering placement of junction or switch boxes, flute connections, break-throughs, or connections of range hoods. For working in concrete the soft hit mode can be switched on for faster drill advance without water supply.
SPECIFICATIONS
Power input
Power output
Tool fixture
Speed under load 1st/2nd gear
Nominal torque 1st/2nd gear
Max. drilling Ø in masonry
Max. drill hole Ø in concrete
Weight
BHI 822 VR
1800 Watt
1200 Watt
M 16
0-1400 / 0-3500 rpm
8,2 / 3,3 Nm
180 mm
82 mm
5,1 kg
8
STANDARD EQUIPMENT
1 handle
1 open-ended wrench SW 22
1 drill depth stop
1 clamp fitting with ratchet clip
1 plastic carrying case
257.580
109.398
251.047
259.490
329.908
STANDARD EQUIPMENT
1 handle
1 adapter 5/8"-16UN/M16
1 open-ended wrench SW 24
1 open-ended wrench SW 22
1 wrench case
1 drill depth stop
1 clamp fitting with ratchet clip
1 plastic carrying case
257.580
255.424
198.781
109.398
258.523
251.047
259.490
329.908
109
Core drilling machines, Blind hole drills
BHW 812 VV
277.940
The handy FLEX core drilling machine for wet drilling
The wet version of this handy machine is designed for drilling concrete (without hammer action) for distributor boxes, fireplace connections, junction boxes and conduits.
Also ideally suited for precision drilling when securing heavy-load anchors.
SPECIFICATIONS
Power input
Power output
Speed under load 1st/2nd gear
Tool fixture
Clamping neck Ø
Max. drill hole Ø in concrete
Max. drilling Ø masonry
Weight
BHW 812 VV
1800 Watt
1200 Watt
0-1000 / 0-3800 rpm
G 1/2"
53 mm
85 mm
185 mm
4,7 kg
8
STANDARD EQUIPMENT
1 handle
1 open-ended wrench SW 22
1 open-ended wrench SW 32
1 wrench case
1 drill depth stop
1 clamp fitting with ratchet clip and centering aid
1 GFCI operator protection circuit breaker in cord
1 plastic carrying case
257.580
109.398
251.475
258.523
251.047
259.491
257.373
329.908
ADVANTAGES AT A GLANCE
• FLEX five-fold VV electronic control: consistent speed control, soft start with acceleration trigger, overload protection, temperature monitoring and speed pre-selection
• Two-gear transmission: for speed-compatible working
• Additional handle: rotating auxiliary handle with stops to prevent turning
• Safety slip clutch: offers protection if the core drill is jammed
• Depth limit gauge: for precision drilling
• Drill bit adapter: G 1/2" (internal)
• Clamping neck: 53 mm, suitable for application in drilling stands
• Water supply: integrated, water collection ring available as accessory
• GFCI operator protector circuit breaker: integrated in cord
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
110
Core drill technology
ADVANTAGES AT A GLANCE
• FLEX triple VR electronics: with consistent speed control by tachometer generator, overload protection, and speed selection
• Quick-action, brass coupling: for 1/2" water hoses
• GFCI operator protector circuit breaker: integrated in cord
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
ADDITIONALLY FOR BHW 1549 VR
• Tool fixture: M 14 for 5-10 mm Ø diamond blind hole drills
ADDITIONALLY FOR BED 18
• Stationary drill stand: with precision column guide
• Suction cup and vacuum: for fixing to smooth surfaces
• Adapter for vacuum extraction
• Tool fixture: M 14 for hollow diamond drills 6-14 mm Ø
BHW 1549 VR
299.197
BED 18
290.300
The FLEX blind hole drill with integrated water supply
The water supply is integrated into the gearbox of this drill. This cools the diamond drill bit optimally and flushes away the drilling sludge. Perfect holes can be drilled in concrete and stone in next to no time. Tilting is avoided, thanks to the low structural silhouette. It can also be used with the FLEX pressurised water tank.
SPECIFICATIONS
Power input
Power output
Speed under load
Speed without load
Tool fixture
Diamond drill Ø
Weight
BHW 1549 VR
1200 Watt
700 Watt
3000-9000 rpm
3500-10000 rpm
M 14
5-10 mm
3,3 kg
STANDARD EQUIPMENT
1 bail handle
1 open-ended wrench SW 17
1 splash guard
1 GFCI operator protection circuit breaker in cord
1 metal carrying case
236.934
106.461
255.171
257.373
273.686
The light FLEX anchor drilling unit with integrated water supply
Exemplary light weight and a play-free column guide of the stationary drill stand ensure precision right-angled drilling results. Ideal for hard, brittle material, such as natural stone tiles, fine stoneware tiles, concrete, rock, or masonry. Swivelling vacuum fixing keeps the drill from slipping and thus prevents scratching of sensitive surfaces. Precision drilling is guaranteed by positioning the unit with the crosshairs. Extraction of the drilling sludge is taken care of by the FLEX industrial vacuum cleaner. It also creates extra suction for the vacuum fixation of the stationary drill stand.
SPECIFICATIONS
Power input
Power output
Speed without load
Tool fixture
Diamond drill Ø
Weight
BED 18
1200 Watt
700 Watt
3500-10000 rpm
M 14
6-14 mm
4,1 kg
8
STANDARD EQUIPMENT
1 suction cup
1 bail handle
1 stationary drill stand with column guide
1 Vacuum hose connection
1 sharpening stone
1 GFCI operator protection circuit breaker in cord
1 metal carrying case
292.052
236.934
290.343
255.507
1 piece
257.373
293.008
111
Core drilling units
BED 55
257.081
BED 69
254.175
The FLEX core drilling unit for confined areas
The slim, stable drill stand, lateral supports and long feed column are characteristic of this drilling unit, enabling drilling of the next higher step from a lower one. Swivelling the feed column enables drilling in corners and recesses on banisters, gravestones and baths. Drilling speed can be adapted to any bit diameter (12-85 mm) thanks to mechanical 3-speed gearing and VR full-wave electronic control.
8
SPECIFICATIONS
Power input
Power output
Speed under load 1st/
2nd/
3rd gear
Tool fixture
Diamond drill bit Ø
Surface area occupied by stand
Weight (complete unit)
The FLEX core drilling unit for drilling edges in facing slabs
The drilling unit consists of the BSW 1549 VR drilling machine permanently mounted on the stable BD 06 stationary drill stand. Speed range is designed for diamond blind hole drills and drill bits with a diameter of 6 to 14 mm. The drills are screwed directly onto the machine, prevent twisting and enabling precise drilling at right angles.
BED 55
1200 Watt
700 Watt
350-1000 /
800-2300 /
1600-4600 rpm
G 1/2"
12-85 mm
420 x 120 mm
17,2 kg
SPECIFICATIONS
Power input
Power output
Speed under load
Speed without load
Tool fixture
Diamond drill bit Ø
Weight (complete unit)
STANDARD EQUIPMENT
1 GFCI operator protection circuit breaker in cord
Stationary drill stand BD 06
BED 69
1200 Watt
700 Watt
3000-9000 rpm
3500-10000 rpm
M 14
5-14 mm
15,5 kg
257.373
254.186
STANDARD EQUIPMENT
Water collection up to 50 mm Ø
1 GFCI operator protection circuit breaker in cord
Stationary drill stand BD 05
256.370
256.790
254.436
ADVANTAGES AT A GLANCE
• FLEX triple VR electronics: with consistent speed control by tachometer generator, overload protection, and speed selection
• Integrated water supply: through the gear head
• GFCI operator protector circuit breaker: integrated in cord
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
ADDITIONALLY FOR BED 55
• Stationary drill stand: with precision column guide, drill stroke up to 300 mm
• Water collector with suction cup: for collecting water, even on stairs
• Drill bit connection: G 1/2"
• Safety slip clutch: offers protection if the core drill is jammed
ADDITIONALLY FOR BED 69
• Clamping device: for slab thickness from 20 to 50 mm, with 2 adjustable stops (60/60 cm)
• Tool fixture: M 14
BED 55: Pick up water even on stairs
Fasten the water collector with suction cup up to approx. 50 mm Ø in drilling position, position feed column with drill bit over the water collector, extract water.
112
Core drill technology
ADVANTAGES AT A GLANCE
• Mechanical 3-speed gearbox: with optimum speed graduation
• Safety clutch: offers protection if the core drill is jammed
• Bubble level: for accurate unit alignment
• Drill centering indicator: with drill center indicator
• Quick-release core bit ring: 1 1/4" UNC
• Slanted drilling: up to 45°
• Hand crank: attaches to both sides
• GFCI operator protector circuit breaker: integrated in cord
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
ADDITIONALLY FOR BED 163
• Drill bit connections: combination shaft with two connections, G 1/2"
(internal), 1 1/4" UNC (external)
• Effective drill bit length: max. 450 mm
• Mounting for water collection ring: for drill Ø up to 130 mm
ADDITIONALLY FOR BED 303
• Overload protection: for a long service life
• Electrical surge protection: for a soft start without power overloading
• Effective drill bit length: max. 700 mm
• Drill bit connection: 1 1/4" UNC (external)
• Combined anchor and vacuum pad
• Quick-clamping fixture: for speedy fitting of the detachable drive motor
• Seals: can be replaced quickly from the outside
BED 163
257.124
BED 303
258.782
The portable FLEX core drilling unit with anchor or vacuum attachment
The 2000 Watt strong, three-geared drill BSW
2123 C combined with the BD 160 stationary drill stand - that is what a light, mobile unit looks like for a one-man operation. The drill bits are are cooled directly by the central water supply. The seals can be replaced quickly from the outside. The combination shaft with two connections, G 1/2" inside,
1 1/4" UNC outside, makes the connection of
FLEX drill bits possible. The water collector ring prevents water damage.
The universal FLEX three-geared core drill unit with anchor or vacuum attachment
No other unit in this performance class is this light, this mobile, and so universally employable for concrete and reinforced concrete. Because of its husky 3000 Watt drive and its three-geared transmission it covers the entire bandwidth of the important drilling range of 35 to 300 mm diameters.
SPECIFICATIONS
Power input
Power output
Speed under load 1st/2nd/
3rd gear
Tool fixture
Diamond drill bit Ø 1st/2nd/
3rd gear
Surface area occupied by stand
Weight (complete unit)
Weight (machine)
BED 163
2000 Watt
1400 Watt
450 / 1080 /
2100 rpm
G 1/2" (internal),
1 1/4" UNC (external)
80-162 / 35-80 /
12-35 mm
430 x 200 mm
18,0 kg
8,8 kg
SPECIFICATIONS
Power input
Power output
Speed under load 1st/2nd/
3rd gear
Tool fixture
Diamond drill bit Ø 1st/2nd/
3rd gear
Surface area occupied by stand
Weight (complete unit)
Weight (machine)
BED 303
3000 Watt
2100 Watt
250 / 500 /
1000 rpm
1 1/4" UNC (external)
150-300 / 75-150 /
35-75 mm
300 x 650 mm
36,0 kg
12,5 kg
STANDARD EQUIPMENT
1 open-ended wrench SW 32
1 GFCI operator protection circuit breaker in cord
251.475
258.562
8
STANDARD EQUIPMENT
1 open-ended wrench SW 24
1 open-ended wrench SW 36
1 GFCI operator protection circuit breaker in cord
198.781
253.649
257.264
113
Core drilling units
BSW 2123 C
256.840
BSW 3023 C
265.616
The powerful 2000 Watt core drilling machine for 12-162 mm Ø
The powerful 2000 Watt BSW 2123 C is perfectly at home in the 12 to 162 mm diameter range. The water supply cools the core bits directly. Seals can be replaced quickly from the outside. The combination shaft with 2 drill bit connections allows to connect any drill bit.
The 3000 Watt core drilling machine for 35-300 mm Ø
This powerful machine produces 3000 Watt and covers the entire diameter range from 35 to 300 mm in concrete and reinforced concrete. The water supply cools the core bits directly. Seals can be replaced quickly from the outside.
SPECIFICATIONS
Power input
Power output
Speed under load 1st/2nd/
3rd gear
Tool fixture
Diamond drill bit Ø 1st/2nd/
3rd gear
Weight
8
STANDARD EQUIPMENT
1 open-ended wrench SW 36
1 GFCI operator protection circuit breaker in cord
BSW 2123 C
2000 Watt
1400 Watt
450 / 1080 /
2100 rpm
G 1/2" / 1 1/4" UNC
80-162 / 35-80 /
12-35 mm
8,8 kg
253.649
257.264
SPECIFICATIONS
Power input
Power output
Speed under load 1st/2nd/
3rd gear
Tool fixture
Diamond drill bit Ø 1st/2nd/
3rd gear
Weight
STANDARD EQUIPMENT
1 open-ended wrench SW 32
1 GFCI operator protection circuit breaker in cord
BSW 3023 C
3000 Watt
2100 Watt
250 / 500 /
1000 rpm
1 1/4" UNC (external)
150-300 / 75-150 /
35-75 mm
12,5 kg
251.475
258.562
ADVANTAGES AT A GLANCE
• Mechanical 3-speed gearbox: with optimum speed graduation
• Overload protection: for a long service life
• Electrical surge protection: for a soft start without power overloading
• Safety clutch: offers protection if the core drill is jammed
• Seals: can be replaced quickly from the outside, no need to dismantle the motor
• Quick-release core bit ring: 1 1/4" UNC
• GFCI operator protector circuit breaker: integrated in cord
• Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
ADDITIONALLY FOR BSW 2123 C
• Drill bit connections: combination shaft with two connections, G 1/2"
(internal), 1 1/4" UNC (external)
ADDITIONALLY FOR BSW 3023 C
• Drill bit connection: 1 1/4" UNC (external)
114
Core drill technology
Vacuum pump, Water pressure tank
ADVANTAGES AT A GLANCE
VP 5
• Carrying handle: for easy transportation
• Filter and trap: dirt and dust is not sucked up
• Safety valve: pressure monitoring gauge, non-return valve, safety tank
VP 5
259.458
WD 10
251.622
The FLEX vacuum pump for BED 163 and BED 303
The handy pump with its high capacity of 5 m 3 /h, provides the necessary suction and secure stance for the stationary drill stand. It is put to use everywhere on level surfaces where the stationary drill stand cannot be affixed with dowels, but rather with the conversion kit for vacuum attachment.
The FLEX pressurized water tank
The 10 liter pressurized water tank is used on construction sites where a water connection is not available. It provides sufficient cooling and rinsing water at an operating pressure of
6 bar and is highly mobile, thanks to the 4 m pressure hose and an empty weight of only
4,5 kg.
SPECIFICATIONS
Power input
Pumping capacity
Capacity
Weight
VP 5
350 Watt
83 l/min
8 l
12,0 kg
SPECIFICATIONS
Capacity
Weight
WD 10
10 l
4,5 kg
STANDARD EQUIPMENT
4 m pressure hose
252.317
STANDARD EQUIPMENT
2,5 m vacuum hose
259.460
8
115
Quality accessories Core drill technology
8
Diameter in mm
Wet core drill bits for the BHW 812 VV, BED 55, BED 163 and BED 303
Diamond drill bits for marble and granite
wet, G 1/2", external thread, effective length
100 mm, continuous segments for 12-15 mm Ø, divided segments for 18-65 mm Ø
12 Ø
14 Ø
15 Ø
25 Ø
30 Ø
42 Ø
45 Ø
Diamond core drill bits for concrete
wet, G 1/2", external thread, effective length
300 mm
42 Ø
52 Ø
61 Ø
wet, G 1/2", external thread, effective length
400 mm
40 Ø
wet, 1 1/4" UNC, internal thread, effective length 400 mm
62 Ø
72 Ø
82 Ø
92 Ø
102 Ø
112 Ø
122 Ø
132 Ø
152 Ø
162 Ø
202 Ø
300 Ø
wet, 1 1/4" UNC, inside thread, effective length
450 mm
Diamond core drill bits for junction boxes in concrete
wet, G 1/2", external thread, effective length
70 mm
68 Ø
82 Ø
116
QP Order number
1
1
1
1
1
1
1
254.563
254.564
258.753
254.567
254.566
254.882
258.755
■ ■ ■
■ ■ ■
■ ■ ■
■ ■ ■
■ ■ ■
■ ■ ■
■ ■ ■
–
–
–
–
–
–
–
1
1
1
258.769
258.770
252.594
■ ■ ■ –
■ ■ ■
■ – ■
–
–
1 252.592
■ ■ ■ –
1
1
1
1
1
1
1
1
1
1
1
254.180
253.543
253.544
253.545
253.546
253.547
253.548
257.015
257.016
257.017
258.772
– –
■ ■
– – ■ ■
– –
■ ■
– – ■ ■
– –
■ ■
– – ■ ■
– –
■ ■
– – ■ ■
– –
■ ■
– – ■ ■
– – –
■
1 258.775
– – –
■
1
1
253.541
253.542
■
■
– – –
– – –
QP = Quantity per package
Core drill technology
D in mm T in mm L in mm QP Order number
Wet drills for the BHW 1549 VR, BED 18 and BED 69
Diamond blind hole drill bit
M 14, wet, for natural stone
Hollow diamond drill bit
M 14, wet, for natural stone and fine stoneware tiles
5 Ø
6 Ø
8 Ø
10 Ø
25
50
50
50
60
80
80
80
1
1
1
1
250.491
250.492
250.493
250.494
■
■
■
■
– ■
– ■
– ■
– ■
6 Ø
8 Ø
10 Ø
12 Ø
14 Ø
65
80
95
105
115
95
110
125
135
145
1
1
1
1
1
315.052
315.060
315.079
315.087
315.095
–
■
–
– ■ –
–
■
–
– ■ –
–
■
–
117
8
Quality accessories Core drill technology
Dimensions in mm
Diameter in mm
Accessories for BH 612 VR and BHI 822 VR
Diamond core drill bits for bricks and concrete, without extraction
dry, M 16, internal thread without dust vacuum extraction, with roofing profile segments, for improved centering, effective length 60 mm
Diamond junction box bits for brick and concrete, with dust extraction
dry, M 30 x 2, 4 segments, inside thread with dust extraction, for extraction rotor: Order no.
251.568
8
Centering cross
for Core bit with dust extraction, magnetic
Dust extraction
Extracts health-hazardous dust and also lengthens the service life of the drill bit. With torsion block. Drill bit connection: M 30 x 2, machine connection: M 16.
Adapter
Adapter 5/8-16 UN to M 16 for connecting the machine to the dust extractor or core bit
Additional accessories
Sharpening stone for diamond tools
320 x 160 x 30
Plastic Multi-Carry case
Perfect fitting, impact resistant carry case, universally adaptable for many different FLEX-
Maschines
Water collection ring
The water collection ring and water vacuum prevent dirt and water damage. With centering aid,
1 guide ring kit, seals, hose.
Vacuum hose for water collection ring
Vacuum hose, consisting of: 1 vacuum hose
(255.505) and 1 vacuum hose connection
(255.507)
82 Ø
68 Ø
82 Ø
118
QP Order number
1 250.524
■ – – – – – – –
1
1
251.570
251.571
■
■
– – – – – – –
– – – – – – –
1 251.569
■
– – – – – – –
1 251.568
■
– – – – – – –
1 255.424
■
– – – – – – –
1 251.756
■ ■ ■ ■ ■ ■ ■ ■
1 329.908
■ ■ – – – – – –
1 255.036
–
■
– – – – – –
1 255.506
–
■
–
■
– – – –
QP = Quantity per package
Core drill technology
Ring-Ø in mm
Drill bit
Ø in mm
Additional accessories
Vacuum hose
Vacuum hose connection
Centering aid with clamp fitting
For drill bits with an effective length of 180 mm
Extension for centering aid
For drill bits with an effective length of 400 mm
Seal ring kit from 20-56 mm Ø
For drill bit Ø 25-61 mm. The internal Ø of a seal ring is 5 mm smaller than the diamond drill bit Ø
Seal ring
For drill bit Ø 25-61 mm. The internal Ø of a seal ring is 5 mm smaller than the diamond drill bit Ø
Guide ring kit from 25-61 mm Ø
The internal Ø of a guide ring is 1 mm greater than the diamond drill bit Ø.
Guide ring
The internal Ø of a guide ring is 1 mm greater than the diamond drill bit Ø.
Fastening set
The fixing set for Core drilling units - for demanding building site applications -includes
1 fixing bolt: 329.614; 1 wing nut washer:
331.082 and 25 drive in anchors: 329.622
Set with 5 different Ø
20 Ø
26 Ø
36 Ø
50 Ø
56 Ø
25 Ø
31 Ø
41 Ø
55 Ø
61 Ø
Set with 5 different Ø
25 Ø
31 Ø
41 Ø
55 Ø
61 Ø
26 Ø
32 Ø
42 Ø
56 Ø
62 Ø
QP Order number
1 255.505
–
■
–
■
– – – –
1 255.507
–
■
–
■
– – – –
1 259.491
■ ■ – – – – – –
1 255.468
■ ■
– – – – – –
5 255.514
– ■ – – – – – –
1
1
1
1
1
255.484
255.485
255.486
255.487
255.488
–
■
– – – – – –
– ■ – – – – – –
–
■
– – – – – –
– ■ – – – – – –
–
■
– – – – – –
5 255.515
– ■ – – – – – –
8
1
1
1
1
1
255.493
255.494
255.495
255.496
255.497
– ■ – – – – – –
– ■ – – – – – –
– ■ – – – – – –
– ■ – – – – – –
– ■ – – – – – –
1 set 329.606
– – – – – –
■ ■
119
Remove hazardous materials as well:
The FLEX industrial vacuum cleaners
120
The 12 best advantages of the FLEX industrial vacuum cleaners:
1 Integrated flat-fold filter
Is extremely flat and, different from cartridge filters, does not reach into the container. Thus the container can be used 100% and the filter remains absolutely dry even during wet vacuuming. Filter exchange from outside – quick, easy, and no dirty fingers.
7 Armoured housing
The impact resistant, recyclable plastic makes the housing strong and light, easy to clean, and corrosion free.
8 Smooth-running carriage
Two large wheels and two double-rollers provide mobility.
The locking brake ensures a firm stance.
2 Highly efficient filter cleaning
Can be activated during running operation at any time by pressing the filter-free switch on the handle – fully automatic.
3 Strengthened paper bags
Extra rip-proof and safe even with sharp-edged objects.
9 Device socket
To connect other devices. Starts and stops the vacuum as the machine is switched on and off. With 15-second automatic after-running.
4 Deposit surface and holders
Keep hoses and accessories tidy.
10 Meets the BIA user category G (for S 36 M)
Extremely high interception ratio of 99.9% – for lowest dust concentrations and healthier working.
5 Drive motor with bypass ventilator
Vacuum air and motor cooling air blow separately in two channels. Dirty vacuum air is not fed through the motor. That protects the motor and increases the vacuum performance.
6 Sound insulation hood
The suction turbine is encapsulated; operating noise is especially quiet.
11 Bayonet turn catch
The suction hose connection is rotatable and is fastened by bayonet: no twisting, no accidental loosening of the suction hose during operation.
12 Top accessories program
All adapters and auxiliary attachments in store.
Industrial vacuum cleaner
FLEX industrial vacuum cleaners suck it all up.
Their filter systems intercept all dust – even healthhazardous substances.
This provides even more safety during dry and wet operation. And once the filter is full, it is shaken out from the suction hose by remote control while the motor is running:
Press the filterfree switch and the full vacuum power is there again!
121
9
Application examples: Industrial vacuum cleaner
9
122
PErFECTly ADAPTED To
EACh oThEr only in connection with a powerful vacuum such as the
S 36 the FlEX giraffe can show its full potential.
WS 702 VEA giraffe, long-neck sander
on page 78
FIlTEr-FrEE SWITCh on
SuCTIon hoSE
When the flat-fold filter is full it can be shaken out by remote control during the vacuum. Industrial vacuum cleaner S 36 and S 36 M
on page 124
DIrT, SWArF, lIquIDS –
All gonE:
FlEX industrial vacuum cleaner S 36, the all-round vacuum cleaner.
ClEAnEr AnD hEAlThIEr
WorKIng
The FlEX industrial vacuum cleaners extract dust and dirt where it is created: right at the power tool.
Overview of the FLEX extraction system: Which suction hose adapter fits to which FlEX electrical power tool?
FLEX electrical power tool with extraction nozzle:
1
Matching adapter for suction hose:
Universal adapter
Can be trimmed to 3 Ø: from 25mm to 32mm Ø order no.
320.188
2
Universal adapter
Can be trimmed to 3 Ø: from 25mm to 32mm Ø order no.
259.827
6
Suction hose extension with snap connection
3
Adapter 32/28
reduction of 32mm to
28mm Ø order no.
251.847
e.g. extraction nozzle of the FlEX renovation sander lDB 1709 Fr
4
Adapter 32/32
from 32mm to 32mm Ø order no.
328.308
order no.
296.953
5
Adapter 32/36
Expansion from 32mm to
36mm Ø order no.
257.169
FLEX electrical power tool with extraction nozzle:
Angle grinder with cutting guard
l 1710 FrA, l 1710 FrC, l 1710 Vr, l 2106 VC, l 3206 CD
Renovation scouring machines
FS 3403 Vrg hPI 603
Renovation sanders
lD 1709 Fr, lD 3206 C lDB 1709 Fr
Wall chaser
MS 1706 Fr-Set with included adapter 327.026
Circular saws
CS 3455 A
CSW 4160
Jigsaws
S 203 BVE
S 203 KVE
Universal sanders
X 1107 VE
MS 713
XS 713
FLEX suction hose with snap connection:
Extraction nozzle
Outer/inner ø in mm:
Matching adapter for suction hose:
Instructions for trimming the universal adapter
1
and
2
for adapting to the extraction nozzles of the power tool:
32/-
36/-
32/-
-/32
28/-
-/36
25/-
36/32
36/32
28/-
-/36
-/36 or or
1
2
4
+
6
+
6
Trim 2 segments, slide on extraction nozzle from outside
Trim 2 segments, slide on extraction nozzle from outside
1
2
+
6
5
or or or or or or
1
2
4
+
6
+
6
1
2
+
6
without adapter
3
+
6
or
1
2
+
6
or
1
2
+
6
1
2
5
+
6
1
2
1
2
4
+
6
+
6
+
6
Trim 1/2 segment, slide on extraction nozzle from outside
Trim 1/2 segment, slide on extraction nozzle from outside
Trim 2 segments, slide on extraction nozzle from outside
Trim 2 segments, slide on extraction nozzle from outside
Trim 2 segments, plug into extraction nozzle
Trim 2 segments, plug into extraction nozzle
Trim 2 segments, plug into extraction nozzle
Trim 2 segments, plug into extraction nozzle
Slide on extraction nozzle from outside
Slide on extraction nozzle from outside
Trim 2 segments, plug into extraction nozzle
Trim 2 segments, plug into extraction nozzle
Trim 1 segment, slide on extraction nozzle from outside
Trim 1 segment, slide on extraction nozzle from outside
Trim 2 segments, plug into extraction nozzle
Trim 2 segments, plug into extraction nozzle
FLEX industrial vacuum cleaners S 36 and
S 36 M:
123
9
All-round vacuum cleaner
S 36
297.003
ADVANTAGES AT A GLANCE
• Connection for power tools: up to 2200
Watt power input
• Patented filter vibration: vibration at the press of a button on the vacuum hose
• Suitable for wet vacuuming: with electronic liquid monitoring
• Vacuum hose: 4 m long, 32 mm internal Ø, with minimum flow resistance for maximum vacuuming performance
• 2 connection adapters: adapter for 28 mm vacuum connection and universal adapter for 25-32 mm vacuum connections
Extra rip-proof filter bags
Even sucked-up bits of stone cause no damage.
The versatile FLEX all-round vacuum cleaner with automatic filter cleaning
Thanks to the great suction capacities the all-round vacuum picks up everything: Dust, dirt, swarf, and even liquids. And it is especially well suited for operation with the longnecked grinder FLEX Giraffe WS 702 VEA: Fine sanding dust that is created when plasterboard panels are sanded is nearly totally filtered out. Should the large-volume flat-fold filter be full it can be shaken down automatically at the press of a button. An when it needs to be replaced - simply pull it out from the outside. If an electrical power tool has been connected to the tool power socket of the vacuum, then the vacuum starts up within 0,5 seconds after the power tool is switched on. And once the machine is switched off the vacuum runs on for 15 more seconds to extract the remaining dust. A deposit surface and a holder for hose and accessories keeps everything neat. Two large wheels and two double-coasters, one with locking brake, makes the vacuum mobile.
9
SPECIFICATIONS
Filter surface
Power input
Max. air flow rate
Max. vacuum
Container volume
Weight
S 36
6200 cm 2
1200 Watt
56 l/sec
235 mbar
35 l
10,0 kg
STANDARD EQUIPMENT
4 m vacuum hose 32 mm Ø with
32/28 mm Ø adapter, 25-32 mm Ø universal adapter and vacuum hose extension
1 filter bag
1 flat folded filter
0,5 m metal vacuum tube
1 floor nozzle complete with carpet combination insert
1 crevice nozzle
297.011
1 piece
296.945
300.691 (2x)
300.659
259.627
With plug for power tools.
Plug in – start saw – the vacuum starts up immediately and continues running for
15 seconds after the Tool is switched off.
124
Industrial vacuum cleaner
ADVANTAGES AT A GLANCE
• Safety filter system: Meets the BIA user category G, maximum permeability
< 0,1 %, special for health-hazardous materials
• Visual and acoustical flow-rate monitor: Full suction under all conditions
• Exhaust diffusor: Protection against raising dust due to exhausts
• Connection for power tools: up to 2200
Watt power input
• Patented filter vibration: vibration at the press of a button on the vacuum hose
• Suitable for wet vacuuming: with electronic liquid monitoring
• Universal connection adapter:
Standard, for 25-32 mm extraction connections
Cover on and close
Suction nozzle closing prevents pathogenic dusts that are harmful to health from escaping during transport.
STANDARD EQUIPMENT
2,5 m vacuum hose 32 mm Ø with snap
1 piece
1 universal adapter with snap
25-32 mm Ø
1 filter bag
1 flat folded filter
1 elbow
0,5 m metal vacuum tube
320.188
1 piece
296.945
297.038
300.691
S 36 M
319.252
The FLEX special vacuum for hazardous dusts
Especially constructed for a clean extraction of at least 99,9 percent of health-hazardous dusts and fluids: Granulates, sanding dust and swarf, e.g. from wood and metals, materials containing cement as well as plastics.
The diffusor attached outside on the vacuum housing reduces the air exhaust speed and thus avoids swirling up harmful dusts from the floor. And in order to prevent dust from escaping from the refuse container while the vacuum is transported, the suction nozzle can be locked on the device. In case the capacity of the vacuum drops below 20 l/sec this will be indicated by a visual and acoustical warning signal. Just as with the all-purpose vacuum S 36 the filter can be conveniently shaken down at the press of a button using the filter-free switch on the suction hose. The device has the full extraction capacity once more following the shake down. The S 36 M is also equipped with a plug for electrical power tools - with automatic 0,5 sec switch-on and 30 sec. afterrunning. Remaining dust does not have a chance to get into the surrounding air. Large wheels and double-coasters provide smooth running.
9
SPECIFICATIONS
Filter surface
Power input
S 36 M
6200 cm 2
1200 Watt
Max. air flow rate
56 l/sec
Max. air flow rate according to EN 60312 35 l/sec
Max. vacuum
Container volume
Weight
235 mbar
35 l
11,0 kg
125
Quality accessories industrial vacuum cleaner
Accessories for FLEX industrial vacuum cleaners S 36 and S 36 M
Fleece filter bags
Filter bag with FLEX VacuFleece Technologie for the S 36 and S 36
M double volume capacity compared to paper filter bags (Order no.
296.961). Tear resistant 4 layered VacuFleece material offers protection against damage from sharp objects. Resistant to unintentional wet or damp objects.
QP Order number
5 329.630
Universal adapter for universal connection of machines with 25-32 mm Ø extraction connection with 32 mm suction hose, adapter can be trimmed to 3 different diameters. Only for S 36.
QP
1
Order number
259.827
Universal adapter for universal connection of machines with 25-32 mm Ø extraction connection with 32 mm suction hose, for adapter with snap connection, can be trimmed to 3 different diameters.
QP
1
Order number
320.188
Paper-Filter bags
Cable clip
Filter bag for S 36 and S 36 M
QP Order number
5 296.961
for fixing power tool cable to vacuum hose, suitable for 27-36 mm external Ø
QP
1
Order number
252.188
Flat folded filter
Vacuum tube
Flat-fold filter for S 36 and S 36 M
QP Order number
1 296.945
Metal vacuum tube, 0.5 m long, galvanized
QP
1
Order number
300.691
Adapter
9
Adapter rotating
Adapter
Adapter 32/28 mm, for connecting machines with 28 mm Ø vacuum attachment to 32 mm vacuum hose
QP Order number
1 251.847
Vacuum hose
32 mm internal Ø, with snap coupling, 4.0 m long, temperature resistant to 70°C, incl. coupling bush for vacuum, filter-free switch module with snap coupling, vacuum hose extension, 32/28 mm adapter and universal adapter
QP
1
Order number
297.011
Adapter 32/32 mm, for connecting machines with 32 mm Ø vacuum attachment (e.g. renovation sanders, angle grinders with cutting guard) to 32 mm vacuum hose. Alternatively as vacuum adapter in connection with part number 882.428
QP Order number
1 328.308
Vacuum hose extension
for connecting the vacuum hose snap coupling to the adapters
32/28 mm, 32/32 mm, 32/36 mm and the universal adapter
QP
1
Order number
296.953
Adapter 32/36 mm, for connecting machines with 36 mm Ø extraction connection (e.g. HPI 603) with 32 mm suction hose
QP Order number
1 257.169
Coupling bush
for connecting two FLEX vacuum hoses
QP
1
Order number
296.996
126
QP = Quantity per package
Industrial vacuum cleaner
Vacuum hose snap coupling repair kit
Accessories for FLEX industrial vacuum cleaners
S 31 R, S 34 E, S 34 K, S 35 and S 35 HO
Coupling bush for vacuum hose with snap coupling, 3-part
QP
1
Order number
296.988
Paper-Filter bags
for S 31 R
Elbow
QP Order number
5 254.490
for connecting the vacuum hose and vacuum tube, with snap coupling
QP
1
Order number
297.038
for S 34 E
Nozzle
QP Order number
5 219.053
Crevice nozzle
QP
1
Order number
259.627
for S 34 K
QP Order number
5 246.786
Upholstery nozzle
QP
1
Order number
259.628
Floor nozzle, complete with carpet and combination insert
QP
1
Order number
300.659
for S 34 K, double-wall reinforcement, specially designed for working with chasers, cutting and scouring machines
QP Order number
5 252.222
for S 35
QP Order number
10 259.264
Carpet insert for use with the floor nozzle for S 35 HO
QP
1
Order number
300.675
Combination insert for use with the floor nozzle
QP
1
Order number
300.683
Flat folded filter
Flat folded filter for S 35 and S 35 HO
QP Order number
10 259.828
9
QP Order number
1 259.307
127
Precise measurements and levelling:
FLEX laser measuring technology
128
Application examples:
•
•
•
•
•
•
•
•
•
•
Horizontal and vertical measuring/levelling
Align wall frames, walls, windows, doors, mirror tiles, and so forth
Lowering ceilings
Determine heights of power outlets and light switches
Determine top edge of screed
Layout rows of tiles and floor panels
Transfer heights and points for mounting
– for mounting bus bars, recessed ceiling lamps, etc.
Align advertising signs
Determine slants and angles
Project lines to align for example posters, pictures, and paintings
Measuring technology
Laser technology has revolutionised measuring and levelling in the construction industry.
The tightly bundled laser beam is emitted absolutely straight and makes precise transfer of heights, angles in space, and verticals possible. In building and drywall construction and interior work, rotation lasers for example have now become indispensable.
The emittance of their 360° beams can be conveniently remotely controlled in some applications. Even complicated measuring tasks can be easily done by one person.
Aids are not needed any more.
Whether drywall constructors, tile layers, electricians, plumbers, kitchen installers, exhibition stand constructors, carpenters, painters, brick layers, and so forth – FLEX has the appropriate precision device for every professional craftsman, for every measuring application, and for every construction site: From the handy laser water level and the self-levelling line laser to the fully automatic rotation laser.
The introduction of these intelligent helpers has finally rendered bubble water levels, plumb lines, and complicated construction aids obsolete. Luminously intense diodes and the high projection precision of the FLEX-
Lasers as well as auxiliary devices such as receivers make laser points or laser lines well visible even under poor light conditions and at greater distances.
129
10
Application examples: Laser measuring Technology
roTATIon LAsEr WITH WALL
AnD CEILIng mounT
Lowering of ceilings becomes a breeze thanks to the rotation laser, remote control, and optimal wall/ ceiling mount.
roTATIon LAsEr In InTErIor ConsTruCTIon
Applying a cutting check is quickly done even on curved walls with the help of the rotating beam. rotation laser ALr 512
on page 133
10
130
ALIgnmEnT oF PrE-FAbrI-
CATED buILDIng AnD LIv-
Ing ELEmEnTs
It‘s one horizontal and two switchable vertical laser lines project in the whole room, allowing for quick levelling and exact assembly.
muLTI-LInE LAsEr For THE
HIgHEsT DEmAnDs
A permanent visible laser line with a 180° wide angle projection simulates the layout of the room. self-levelling multi-line laser ALC 514
on page 132
CrossLInE LAsEr For Dry-
WALL ConsTruCTIon
The individually switchable laser lines can easily dimension dividing walls and precisely align metal frame profiles. self-levelling crossline laser ALC 311
on page 132
CrossLInE LAsEr In bATHrooms
For exact levelling of mirror tiles and for sanitary installations true to dimensions.
Measuring technology
QuICk ALIgnmEnT usIng
THE LAsEr mousE sticks with 3 adhesion points also on dry, dust-free surfaces. Laser mouse AL 11
on page 135
5-PoInT LAsEr For
DETErmInIng PosI-
TIons PrECIsELy spatial transfer of orientation points and right angles in 3 axes.
Safety information:
FLEXLaser measuring devices meet all international safety standards. They comply with laser class 2 or 2m according to DIn En
60825-1: 2001-11 (wave length 635-670 nm, < 1mW output) and are safe for eyes and skin under normal use. nevertheless one should never look directly into the laser beam when using laser measuring devices.
5-PoInT LAsEr For PLumb-
Ing
Easy transfer of contours and cutouts using the plumb function. With automatic self-levelling. self-levelling
5-point laser ALP 305
on page 134
LAsEr WATEr LEvEL WITH
LAsEr LInE e.g. for transferring heights.
10
LAsEr WATEr LEvEL WITH
LAsEr PoInT e.g. for aligning substructures. Laser water level
AL 10
on page 135
131
Laser Measuring Technology
ALC 311
311.286
ALC 514
329.460
ADVANTAGES AT A GLANCE
• Cross-laser projection
• Self-levelling with robust magnetic damping
• Optical and acoustical warning signal when self-levelling range is exceeded
• Transportation lock
ADDITIONALLY FOR ALC 311
• Three visible, individually switchable laser lines
• Vertical line 90° to cross laser
• Padded carrying bag
The self-levelling crossline laser for interior work
The ideal tool for interior construction: Vertical and horizontal levelling plus right-angles.
For drywall, exhibition stand and kitchen constructors, carpenters, plumbers, electricians, tile layers, and other professional craftsmen. For example for lowering ceilings, aligning metal frame walls in drywall construction, aligning doors and windows, transferring of heights, levelling of mirror tiles, for alignments, etc.
The self-levelling multi-line laser for visual room layout
The professional multi-line laser with 180° wide angle projection of the laser line. Perpendicular laser point function. With the optional FLEX receiver RC 2 and on/off pulsating beam of the ALC 514, the working distance can be increased up to 50 m. For all complicated grading and levelling projects, e.g. building engineering. interior construction and outdoor area.
SPECIFICATIONS
Precision
Self-levelling range
Operation duration
Visible laser diodes
Max. working range
Laser class
Weight
ALC 311
± 3 mm/10 m
± 3,5°
15 h
3 x 635 nm
20 m
2M
0,7 kg
SPECIFICATIONS
Precision
Self-levelling range
Operation duration with battery drive
Visible laser diodes
Max. working range
Max. range with receiver
Laser class
Weight
ALC 514
± 3 mm/10 m
± 3°
12 h
5 x 635 /
1 x 650 nm
20 m
50 m
2M/2
1,6 kg
10
STANDARD EQUIPMENT
Wall and tripod console
Magnetic target panel
Laser goggles
1 piece
315.281
312.134
Batteries 1,5 V (AA) for measuring device 3 pieces
Padded carrying bag
1 piece
STANDARD EQUIPMENT
Magnetic target panel
Mains adapter 6 V
Laser goggles
Battery pack 3.6 V
Padded carrying case
315.281
1 piece
312.134
2 pieces
1 piece
ADDITIONALLY FOR ALC 514
• Three visible single laser lines with
180° wide angle beams individually on/off switchable
• On/Off switchable perpendicular point function
• Pulsating beam for use with receiver
• with universal floor tripod
• Dust- and splash-proof
• Padded carrying case
132
Measuring technology
ADVANTAGES AT A GLANCE
• Full automatic horizontal and vertical self-leveling
• Switchable automatic to manual leveling function in combination with grade mount, obtainable as accessory (order no. 329.479)
• Switchable TILT alarm function: safety modus against unintentional disturbance of the unit
• Two step rotation or target point only
• Incremental manuell angle adjustment up to max ± 5° horizontal and vertical
• Permanent perpendicular beam
• Re-chargable and normal battery operation
• Two-level scanning function
• Automatic switch-off and acoustical signal when limits are exceeded, can be switched off
• Rechargeable battery packs and charger
• Dust- and splash-proof
• Padded carrying case
ALR 512
329.452
The self-leveling rotating laser for vertical and horizontal use
Showerproof full automatic rotation-laser with remote control for universal indoor and outdoor use. With scanning, point and leveling function. Complete with receiver.
SPECIFICATIONS
Precision
Self-levelling range
Operation duration with battery drive
Visible laser diodes
Max. range with receiver
Range rotating (without receiver)
Range point / scan function
(without receiver)
Rotation speed
Laser class
Weight
ALR 512
± 1 mm/10 m
± 5°
14 h
635 nm
300 m ca. 30 m ca. 50 m / ca. 30 m
500 / 200 rpm
2
1,7 kg
STANDARD EQUIPMENT
Magnetic target panel
Wall and floor mount
Conus for wall and floor use
6 V battery pack
Mains adapter 6 V
Battery container
Receiver with dual-display
Batteries 1,5 V (AA) bracket
Remote control, incl. 1 battery 9 V
Padded carrying case
315.281
1 piece
1 piece
324.159
1 piece
1 piece
1 piece
2 pieces
1 piece
1 piece
1 piece
10
133
Laser Measuring Technology
ALP 305
318.639
The self-levelling FLEX 5-point laser with floor and wall console
Universal laser point levelling device for metal construction, carpentry, interior work, sanitation, and other construction. Five automatically self-levelling laser points determine the horizontal (by readjusting the rotary plate), all right angles in space, and a continuous plumb. Thanks to the multiple projections of the right angles precise positions of construction elements, walls, or openings can be quickly measured and determined over distances of up to 30 meters. Beyond that the laser plumb function simplifies measuring in the floor and ceiling areas. In addition to placement on walls, floors, or on tripods, the magnetic floor and wall console of the 5point laser makes it possible to mount it on metal frame profiles.
10
SPECIFICATIONS
Precision
Self-levelling range
Operation duration
Visible laser diodes
Max. working range
Laser class
Temperature range
Weight
STANDARD EQUIPMENT
Batteries 1,5 V (AA)
Magnetic floor and wall console
Magnetic target panel
Clip belt
Padded carrying case
ALP 305
± 2 mm/10 m
± 3,5°
24 h
650 nm
30 m
2
-10 / +40 °C
0,8 kg
3 pieces
1 piece
315.281
1 piece
1 piece
134
ADVANTAGES AT A GLANCE
• 5 visible, permanent laser points that can be aligned at 90° angles to each other.
• Quick self-levelling with robust magnetic damping
• Optical and acoustical warning signal when self-levelling range is exceeded
• Optical warning signal for discharged batteries
• Multi-purpose, magnetic floor and wall console
• Dust- and splash-proof
• Padded carrying case
Fully automatic in all 3 axes
Quick and easy transfer of zenith point to plumb point and radiation of points for spatial right angles.
Measuring technology
ADVANTAGES AT A GLANCE
AL 10
• Laser point or laser line
• Laser line can be set stepless from vertical to horizontal, additional snaps in
90° positions
• 45°, 90°, and 180° spirit levels
• Fastening magnet
• 1/4" thread for camera tripod
• Padded carrying bag
AL 11
• Laser line easily visible for up to 9 meters (depending on light conditions)
• Horizontal and vertical level
• Good adhesive strength by three replaceable adhesion points
• The ideal helper for construction, e.g.
for building shelves, sanitation, painting and wallpapering jobs, alignment of construction elements and pictures, etc.
• Practical case with belt loop
Laser water level with laser line
e.g. for transferring heights.
AL 10
311.278
AL 11
318.620
The handy laser spirit level with laser point and laser line
With precision spirit levels and absolutely parallel laser beam the low-cost alternative to conventional spirit levels and ruler. Creates either a laser point or a laser line for transfer of heights and the determination of angles. Magnetic base.
SPECIFICATIONS
Precision
Operation duration
Visible laser diodes
Range of laser
Laser class
Temperature range
Weight
AL 10
± 3 mm/10 m
30 h
650 nm max. 30 m
2
0-40 °C
0,3 kg
The mouse, the FLEX line laser for horizontal and vertical alignments
Line laser for projecting line markings. Horizontal and vertical levels make a precise and split-second alignment possible along walls and floors. The laser mouse is easy to use and can be attached to dust-free surfaces by self-adhesive adhesion points. This little helper shouldn't be missing in any toolbox.
SPECIFICATIONS
Precision
Operation duration
Visible laser diodes
Range of laser
Laser class
Weight
AL 11
± 1,3 mm/m
20 h
635 nm max. 9 m
2M
0,13 kg
STANDARD EQUIPMENT
Batteries 1,5 V (AAA)
Padded carrying bag
2 pieces
1 piece
STANDARD EQUIPMENT
Batteries 1,5 V (AA)
Case with belt loop
Self-adherent glue dots
2 pieces
1 piece
1 set
10
Determining reference lines with the laser mouse
Projection of precise line markings along walls and floors. Laser mouse AL 11
135
10
136
Laser Measuring Technology
Elevating tripod, medium
312.118
Elevating tripod, large
312.126
ADVANTAGES AT A GLANCE
• Lockable elevator post with mm scale
ADDITIONALLY FOR ELEVATING TRIPOD,
MEDIUM
• With opening to bottom for plumb line projection to floor
Elevating tripod, medium
Robust and yet easy to transport elevating tripod with quick clamping of the extendable legs. With carry straps and rubber feet can be screwed outwards for smooth floors.
Elevating tripod, large
Robust and yet easy to transport elevating tripod with quick clamping of the extendable legs. With carry straps and rubber feet can be screwed outwards for smooth floors.
SPECIFICATIONS
Working range
Adjustability of elevator post
Weight
ELEVATING
TRIPOD, MEDIUM
0,65 - 2 m
0,39 m
5,1 kg
SPECIFICATIONS
Working range
Adjustability of elevator post
Weight
STANDARD EQUIPMENT
Adapter plate
1 piece
STANDARD EQUIPMENT
Adapter plate
ELEVATING
TRIPOD, LARGE
0,9 - 2,85 m
0,4 m
9,1 kg
1 piece
Measuring technology
Receiver RC 2
Accessories for laser measuring technology
Clamping post
The five-segment clamping post is clamped between floor and ceiling (max. height 3,4 m). With a holder that is steplessly adjustable in height for attaching laser measuring devices with 5/8" threads, for FLEX Laser ALC 311, ALC 514, ALR 411 M and ALP 305.
Tool fixture QP
G 5/8" 1
Order number
312.096
Grade mount
For ALC 514. Hand-Receiver to locate the laser beam when it cannot be seen with the human eye. With bracket, as well as optical and acustic signal.
QP Order number
1 329.487
For ALR 512. To set the rotation laser in infinite gradings when operating on manuel setting.
QP Order number
1 329.479
Wall and ceiling mount
Stable mount for attaching rotation and line lasers to ceiling profiles or to the wall. With 5/8" thread, e.g. for FLEX Laser ALC 311,
ALR 411 M, ALR 511 A, ALR 512 and ALP 305. Equipped with a height fine tuning.
Tool fixture QP
G 5/8" 1
Order number
312.088
Laser goggles
Improves the visibility of the laser beam especially at greater distances.
QP Order number
1 312.134
Magnetic target panel
Boosts the projection of the laserbeam over long distances or in light surroundings.
QP
1
Order number
315.281
QP = Quantity per package
137
10
For your safety: FLEX safety features and warranty
FLEX machines meet all legal trade and professional association safety regulations. FLEX stands for practical solutions and professional quality down to the last detail. Should there be any faults on a machine, the
FLEX manufacturer warranty will take care of it, quickly and unbureaucratically.
Electrical safety of operation
Faulty tools pose a hazard to the user when precautions are not taken seriously in high voltage areas, to prevent electric shock. FLEX electrical power tools are insulated according to the safety classes I and II from EN 60745.
Electrical safety devices
A) Machines with water supply
The safety of FLEX devices with water supply is guaranteed as follows:
a) Isolating transformer
Devices that are equipped with a plug
(position of the earth pin: 12h) acc. to IEC
60309-2 are delivered in safety class II and can be operated only in combination with a isolating transformer according to EN 60742.
b) Residual current operated device (GFCI)
Devices with a GFCI in the power supply line (trip circuit 10 mA) are supplied with increased insulation and protective earth conductor (earth connection of the metal parts that can be touched from outside).
B) Transportable motor driven electrical
power tools acc. EN 61029-1
Residual current operated device (GFCI)
Devices with a GFCI in the power supply line (trip circuit 30 mA) are supplied with increased insulation and protective earth conductor (earth connection of the metal parts that can be touched from outside).
Warranty
When purchasing a new machine FLEX provides a 2-year manufacturer warranty, beginning on the day of the sale of the machine to the end customer. The warranty covers only damages that can be traced back to material and/or manufacturing faults as well as the non-compliance of promised features. In case of assertion of claims from this warranty the original sales receipt that shows the purchase date has to be submitted. Warranty repairs may be made only by shops or service stations authorised by FLEX.
An assertion of claims exists only when used appropriately. Excluded from this warranty are in particular regular operational wear, improper use, partially or completely disassembled power tools, as well as damage due to overload of the machine, the use of nonpermitted, defective, or improperly applied tools. Damages caused by the machine on the application tool or workpiece, use of force, consequential damages, that can be traced to improper or insufficient maintenance by the customer or third parties, damaging due to external influence such as sand or stones as well as damages due to nonobservance of the instructions such as connection to wrong voltages or type of electricity.
Radio interference suppression
FLEX electrical power tools are shielded according to EN 55014 and EN 61000 according to EU directive 89/336/ EEC.
11
Technical modifications and illustra-
tions. Our FLEX electrical power tools are always brought to the current state of the art. We therefore reserve the right to change technical specifications. Illustrations are also non-binding.
138
For your safety: FLEX safety features and warranty
Informationen
Greater performance, longer service life:
FLEX electronics for top performances
More power, gradual acceleration of the speed that is easy on the motor, speeds kept in the optimal range, and safe protection from overload. Those are, briefly summarised, the typical characteristics of FLEX electronics. A further advantage on machines with greater Wattage is the starting-current limitation. It briefly reduces the high starting current and thus prevents the tipping of the fuse in the mains.
«The tachometer generator is also a technology with many great features. It constantly monitors the speed of the armature. If it deviates from the nominal value, the current is regulated appropriately. It goes full throttle for example if there is an extra load until the set speed has been reached again.
If the motor is unduly loaded, the drawing of current is automatically reduced to a
««healthy»« level.»
In highly loaded motors a temperature monitoring with PTC resistance is employed. It protects the windings from overheating and overloading. FLEX electronics � so things runs smoothly.
The electronics is, so to say, used for tuning a machine.
With FLEX electronics the motor output can be increased significantly if necessary.
The best part is:
This also extends the service life of the motor.
Microprocessor electronics
FLEX Electronics
Speed selection
Regulation
Control system
Starting-current limitation*
Temperature monitoring with
PTC resistance
Protection from overload
Other advantages
FE
none depends on current full wave yes no current monitoring
– power increase
FR
none depends on speed full wave yes on especially loaded machines current monitoring
–
– power increase tachometer generator
Frequency
50 Hz
*on machines with high power consumption
50/60 Hz
VE
stepless (adjustment wheel) none half wave no no automatic reduction of the speed when motor load too great current monitoring current and temperature monitoring current and temperature monitoring of the motor none
50 Hz
VR FV VV
stepless (adjustment wheel) depends on speed none stepless (accelerator trigger switch and adjustment wheel) depends on current depends on current full wave yes full wave yes full wave yes on especially loaded machines
–
– power increase tachometer generator
50/60 Hz yes
– power increase –
– speed switch power increase
50 Hz yes
50 Hz
FR, FRG
none depends on speed full wave yes
VR, VRG
stepless depends on speed full wave yes
L3410FR
L3410FRG
L3410VR
L3406VRG
L3403VRG current, partially temperature monitoring current, partially temperature monitoring
–
– power increase restart protection after power interruption
–
–
– power increase restart protection after power interruption partially accelerator trigger switch
50/60 Hz 50/60 Hz
11
139
Customised solutions: FLEX drives in modular system
You can also tap our broad knowledge of electric motors to develop drives for your own machine constructions. Whether motors for light work or heavyduty endurance – we‘d be glade to consult you.
Most versatile combinations possible
The output of the FLEX drives range from 710
Watt to 3000 Watt. The combination possibilities of housings, grips, switches, and electronics are nearly limitless. If you select a massive metal composite housing, you can combine it with cover plate, stick handle or spade handle, with on/off switch, or safety catch.
As an alternative especially slender housings with semi-rough surfaces ensuring a secure grip and made of weathering-resistant special plastic are available.
There is a choice of six different electronics with full- and half-wave technology (current- or speed-dependent), some are microprocessor controlled. Engineering by FLEX – for your customised solutions.
Tips and know-how for craftmen:
FLEX Training courses
FLEX trains its dealers
In our seminars held in our Steinheim/Murr headquarters FLEX dealers and FLEX sales personnel learn everything about innovative processing methods and the latest tools and machines. This, so that they can always offer their customers the best and most up-todate solutions. If you are interested, contact your FLEX retailer.
FLEX presents its machines
Much better than words - a test run with a new FLEX machine is convincing. That is why
FLEX dealers gladly make use of an offer provided by our company: the FLEX demonstration service.
This includes a visit by the FLEX dealer along with the demonstration technicians to the customer, directly in his shop or on the construction site. The professional practitioners can then put over 60 machines and tools through their paces on site. With convincing success! If you are interested, contact your
FLEX retailer.
The practical FLEX ideas are created not only in the development labs, but also on construction sites and in the shops. This practical know-how helps us develop new machines and tools. And it helps our customers in the applications and in sales.
We gladly pass it on.
11
140
Type
A
AC 12
ACH 14
ACH 19
AL 10
AL 11
ALC 311
ALC 514
ALP 305
ALR 512
B
BED 18
BED 55
BED 69
BED 163
BED 303
BH 612 VR
BHI 822 VR
BHW 812 VV
NEW
BHW 1549 VR
BRL 3501 A
BSW 2123 C
BSW 3023 C
C
CS 3455 A
CSM 4060
CSW 4160
F
F 1109
FS 3403 VRG
NEW
H
H 1105 VE
H 1127 VE
H 1206
H 1212 Z
HPI 603
L
L 602 VR
L 602 VR-Set
L 1202
L 1501 VR
L 1710-FRA
L 1710 FRC
L 2106 VC
L 2108 VC
NEW
L 3206 CD
L 3208 CD
L 3309/125
L 3309 FR
NEW
NEW
L 3309 FRG
L 3403 VRG
L 3403 VRG-Set
L 3406 VRG
L 3410 FR
Page
124
125
59
59
56
58
56
57
58
28
60
115
115
78
86
79
37
46
46
36
36
96
70
70
71
71
38
30
26
29
88
89
14
13
91
91
14
28
27
88
11
11
8
8
102
102
103
135
135
132
132
134
133
111
112
112
113
113
109
109
110
111
103
114
114
10
45
45
13
10
17
17
9
9
12
12
15
15
44
44
47
47
Page
60
61
62
37
92
18
18
19
19
92
Type
L
L 3410 FRG
L 3410 VR
L 3709/115
L 3709/125
NEW
NEW
L 3806 C
LBR 1506 VRA
LBS 1105 VE Profi-Set
LD 1709 FR
LD 3206 C
LDB 1709 FR
LG 1707 FR
LK 604
LL 1107 VEA
LLK 1503 VR
LP 1503 VR Profi-Set
LRP 1503 VRA
LST 803 VR
LST 1503 VR
M
MS 713
NEW
MS 1706 FR-Set
R
R 500 FR
R 502 FR
R 600 VV
RZ 600 VV
S
S 36
S 36 M
S 203 BVE
S 203 KVE
S 2902 VV-Basic
SK 602 VV
SKE 2902 VV
SKL 2903 VV
SR 602 VV
ST 1005 VE
T
TCS 3602
NEW
V
VP 5
W
WD 10
WS 702 VEA
WS 1505 FR
WSK 702 VEA
X
X 1107 VE
XC 3401 VRG
NEW
XC 3401 VRG-Set
XS 713
NEW
NEW
How to get to FLeX
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15
D-71711 Steinheim/Murr-Germany
Telephone +49(0)7144 828-0
Telefax +49(0)7144 25899 [email protected] www.flex-tools.com
FLEX Customer service.
On-line around the clock for you.
Our customer service can be reached by phone Monday through Friday and any day via the Internet. For all questions about FLEX quality electrical power tools, accessories, and spare parts, but also for quick referral to the nearest FLEX dealer in your area.
Customer service:
Telephone: 07144 828-0 | Telefax: 07144 25899 e-mail: [email protected]
Internet: www.flex-tools.com
Should you wish to give us your opinion, make suggestions on improving FLEX machines, or tell us how we can expand our program – please do send us an e-mail:
FLEX Service centre.
The experts for quick action and good advice.
In case your FLEX requires service – no problem: You send your machine with a brief fault description to our local service centre, we will carry out the service and send your FLEX back to you as fast as possible. And should you have any questions on the technology or the accessories, just give us a call.
FLEX retailers.
Where professional technology and competent consultation meet.
No question: advance technology is accompanied by knowledgeable specialist consulting. That is why FLEX quality electrical power tools are available exclusively from qualified dealers. And qualified means in this case:
Whoever is a FLEX dealer has been trained on FLEX and has competent answers for the trickiest questions.
11
141
Power Tools
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15
71711 Steinheim/Murr-Germany
Telephone +49 (0) 7144 828-0
Telefax +49 (0) 7144 25899 [email protected] www.flex-tools.com
Subject to technical modifications.
Your FLEX retailer
2007
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project