Canon | i320 | Instruction Guide | Canon i320 Instruction Guide

Start Here
Color Bubble Jet Printer
Easy Setup Instructions
1 Unpack the Printer
1 Carefully remove all items from the box.
3 Install the Print Head
2 Prepare the Printer
1 Remove the shipping tape from the printer.
1 Remove the print head from its package.
4 Install the Ink Tanks
1 Remove the black ink tank (BCI-24 Black)
from its packaging and pull off the orange
protective cap.
the Printer
5 Connect
To Your Computer
1 Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
Protective cap
2 Turn the print head over, then remove
Shipping Tape
the orange protective cap.
NOTE: To avoid spilling ink, do not touch the
bottom of the tank once you have removed
the protective cap.
Series
Bubble Jet Printer
2 Open the front cover. Remove the packing
material from the print head holder.
2 Insert the black ink tank into the slot on
the right. Press down until the ink tank
locks into place.
IMPORTANT: BE SURE THE PRINTER
IS OFF, or the computer will attempt
to install the printer driver before
the printer is ready.
NOTE: Do not touch the electrical contacts.
Print Head
2 Connect one end of a USB cable (not
Electrical contacts
included) to the computer, the other to
the printer.
Serial number
Print head nozzles
Packing
material
Power Cord
3 Raise the gray lock lever.
3 Repeat the procedure for the color ink
tank (BCI-24 Color), inserting it into the
remaining slot.
Print head
holder
NOTE: The serial number is located to the right
of the print head. You will need this to register
the product.
Ink Tanks
BCI-24 Black
BCI-24 Color
4 Slide the print head into the holder until
it is securely seated.
4 Close the front cover. Pull out the paper
rest and the output tray.
USB Port
5 Lower the gray lock lever until it locks
Documentation
and Software Kit
NOTE: The “i320 Setup Software & User’s
Guide” CD-ROM contains printer drivers,
software applications and electronic manuals.
into place.
USB Cable
Continue with Step 6
on side two.
6 Install the Printer Driver (Windows )
6 Install the Printer Driver (Macintosh )
®
7 Align the Print Head
M
ac
in
to
sh
W
in
do
ws
®
1 Turn the computer on and LEAVE THE
PRINTER OFF.
NOTE: For Windows® XP or Windows 2000,
log on to Windows as an Administrator before
continuing.
IMPORTANT: If you see the Found
New Hardware Wizard, click Cancel.
6 When the driver installation is complete,
click Finish.
IMPORTANT: Drivers included with
this printer support Mac 8.6-9.x. For
Mac OS X driver and instructions, go
to www.canontechsupport.com.
7 From the Application folder, double-click
on the software to be installed. Follow the
on-screen instructions.
1 Place a stack of blank paper in the
7 Register your product to ensure
product support. Follow the on-screen
instructions.
paper rest.
NOTE: Screen shots may differ depending on
the operating system used.
2 Start the alignment procedure.
Windows:
1 Turn the computer on and LEAVE THE
PRINTER OFF. Then insert the “i320 Setup
Software & User’s Guide” CD-ROM.
2 Open the printer driver folder on the
CD-ROM, then double-click the Installer
icon.
2 Close all software applications, then insert
the “i320 Setup Software & User’s Guide”
CD-ROM. The setup program should run
automatically.
Before using the printer, align the print
head to ensure the best quality printing.
8 When the “Installation was successful”
screen displays, Restart your computer.
9 TURN THE PRINTER ON. Select the Apple
a. For Windows XP select Start,
Settings, then Control Panel, then
click on Printers and Other Hardware,
then Printers and Faxes.
menu, then Chooser.
b. Right-click the Canon i320 icon,
then click Printing Preferences.
8 When the software menu appears, click
c. Click the Maintenance tab, then
click the Print Head Alignment icon.
Install.
d. When asked to start print head
alignment, click OK.
NOTE: If the CD-ROM does not run automatically,
double-click My computer, then double-click the
CD-ROM icon.
10 Click on the i320 printer icon.
3 Read the License Agreement, then click
3 Read the License Agreement, click Accept
Yes to continue.
e. Wait about 60 seconds for the
calibration sheet to print. Follow
the on-screen instructions to
complete print head alignment.
to continue.
4 When the main menu appears, click
Install.
9 When the software installation is complete,
click OK, then Exit.
4 Click Install. The printer driver will load
automatically.
Macintosh:
a. From the File menu in a software
application, click Page Setup.
10 To ensure highest quality output, continue
with Step 7 Align the Print Head.
11 Close the Chooser.
NOTE: Register your product at
www.registercanon.com to ensure product
support.
5 When the Printer Port window appears,
TURN THE PRINTER ON. The software will
begin identifying the printer port being
used.
c. Click the down-arrow to select
Test Print.
d. Click the Print Head Alignment icon.
5 If the message “No other applications can
be running...” displays, click Continue.
12 To ensure highest quality output, continue
with Step 7 Align the Print Head.
6 When the “Installation was successful”
screen displays, click Restart.
IMPORTANT: If your computer can
not detect a printer port, refer to the
Troubleshooting chapter in the i320
Quick Start Guide for instructions.
b. Click the Utilities button.
e. Wait about 60 seconds for the
calibration sheet to print. Follow
the on-screen instructions to
complete print head alignment.
3 Click OK (Windows) or Close then OK
(Macintosh) when finished.
QA7-2171-V01/082002A
©2002 Canon U.S.A. Inc.
Canon is a registered trademark of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
PRINTED IN THAILAND
Download PDF

advertising