Canon | i70 | Instruction Guide | Canon i70 Instruction Guide

Start Here
i70
Easy Setup Instructions
1 Unpack the Printer
1 Carefully remove all items from the box.
3 Install the Print Head
2 Prepare the Printer
1 Remove all shipping tape and materials
1 Open the print head cover.
Series Color Bubble Jet Printer
4 Install the Ink Tanks
5
Connect to Your Computer
1 TURN THE PRINTER OFF.
1 Remove the BCI-15 Black ink tank
from its package.
from the unit.
2 You MUST
T remove the protective cap.
IMPORTANT: Be sure the printer
is off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
2 Connect the USB cable to the
computer, the other to the printer.
Shipping Tape
i70 Series Printer
2 Press in on the lock button and lift the
2 Plug the power cord into the AC adapter.
USB
connection
Connect the DC plug to the printer.
3 Insert the black ink tank into the back slot.
Power Cord
DC plug
Power cord
3 Remove the print head from its package.
Turn the print head over and remove the
protective cap from the print head cover.
4 Press down until it locks into place.
3 Plug the power cord into the power outlet.
port
NOTE: Do not touch the print head nozzles.
Nozzles
i70 Series Print Head
Serial #
Location
USB
plug
5 Using the procedure above, insert the color
BCI-15 Color
Ink Tank
4 Place the print head into the holder.
ink tank into the front slot.
DC
plug
Ink Tank
6 Close the print head coverr and move the
paper thickness lever to the right.
4 Lift open the paper rest and TURN THE
PRINTER ON. The printer will initialize.
Continue with Step 6
on side two.
5 Lower the gray lock lever until
it is sec
Documentation
and Software Kit
NOTE: Electronic User’s Guide is included
on the CD-ROM.
per Thickness
er
Paper Output Slot Cover
6 Install the Printer Driver (Windows )
6 Install the Printer Driver (Macintosh )
M
ac
in
to
sh
1 Be sure that the printer is off, then turn on
your computer.
POWER
Button
POWER
Lamp off
7 Align the Print Head
®
W
in
do
ws
®
5 When the Printer Port window appears,
TURN THE PRINTER ON. The software
will begin identifying the printer port
being used.
NOTE: If you are using Mac OS 8.6 to 9.x,
please refer to your Quick Start guide for
installation instructions.
7 Select a destination for the printer driver
to be installed. Then click Continue.
1 Turn on your Mac and your printer and insert
Before using the printer, align the print head
to ensure the best quality printing.
1 Load a stack of blank paper in the
the “Setup Software & User's Guide”
CD-ROM.
paper rest.
2 Start the alignment procedure.
2 Open the Mac OS X folder, then double-click
Windows:
the Printer Driver folder.
NOTE: For Windows® XP or Windows 2000,
before continuing.
IMPORTANT: If you see the Add New
Hardware Wizard, click Cancel.
8 Click Install. When a message asking for
your confirmation to proceed with the
installation, click Continue Installation.
IMPORTANT: If your computer cannot
detect a printer port, refer to the
Troubleshooting chapter in the
i70 Quick Start Guide for instructions.
a. For Windows XP select Start, then
Control Panel. Then click on Printers
and Other Hardware, then Printers
and Faxes.
b. Right-click the Canon i70 icon,
then click
.
c. Click the Maintenance tab, then
click the Print Head Alignment icon.
d
alignment, click OK.
3 Double-click the i70 icon.
6 When the driver installation is complete,
click Finish.
e. Follow the on-screen instructions
to complete print head alignment.
7 Register your product to ensure product
support. Follow the on-screen instructions.
9 When the message “The software was
Macintosh OS X:
” appears, click
Restart.
2 Close any open software applications,
then insert the “Setup Software
& User’s Guide” CD-ROM. The setup
NOTE: For v10.2 users, skip to Step 5.
4 Cli
10
0 Access your CD-ROM again. From the
Application folder, double-click on the
software to be installed.
then click OK.
NOTE: If the setup program does not run
Start, then Run,
then type D:/msetup.exe, where D is
your CD-ROM drive.
Under Printers menu, select Configure
Printer. Select i70, and click Select.
NOTE: Be sure to register your product. The
3 Read the License Agreement, then click Yes.
a. Double-click the Macintosh HD icon,
then
folder. Double-click
the Utilities folder, then the Print Center
icon. The Printer List window appears.
printer.
4 When the main menu appears, click
Install.
11 Follow the on-screen instructions. When the
Serial #
Location
“Installation is Complete” screen appears,
click OK.
5 When the “Welcome to the BJ printer
installer” screen appears, click Continue.
8 When the software menu appears,
click Install.
NOTE: Be sure to register your product. The
b. Click the down-arrow to select Test
Print.
c. Click the Print Head Alignment icon.
printer.
6 Read the Software License Agreement
and click Continue, then click Agree.
Serial #
Location
3 Follow the on-screen instructions.
IMPORTANT: To ensure highest quality
output, continue with Step 7 Align the
Print Head.
IMPORTANT: To ensure highest quality
output, continue with Step 7 Align the
Print Head.
4 Click OK (Windows) or Send (Macintosh)
when finished.
40-42380-0902
Part no. QA7-2532-V01
©2002 Canon U.S.A., Inc.
Canon is a registered trademark of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
PRINTED IN VIETNAM
Download PDF

advertising