Canon | C350iF | Getting Started Guide | Canon C350iF Getting Started Guide

Starter Guide
Read this guide first.
Please read this guide before operating this product. After you finish reading the guide, store it in
a safe place for future reference.
Manuals for the Machine
The manuals for this machine are divided as follows. Please refer to them for detailed information.
Guides with this symbol are printed manuals.
Guides with this symbol are included on the accompanying CD-ROM.
Guides with this symbol can be downloaded from the Canon website (http://www.canon.com/) and installed.
Starter Guide (This Manual)
)) Describes
the precautions for using the machine.
how to open and install the machine.
)) Describes the maintenance and troubleshooting procedures for the machine.
)) Includes the specifications of the machine.
)) Describes
Quick Operation Guide
)) Describes
the basic operations for using the machine.
you do not understand how to use one of the machine's operations, you can quickly
check it here.
)) When
e-Manual (HTML Manual)
)) Describes
all the functions of the machine. Also provided with a search function that is useful
for finding and checking information.
)) Includes "Practical Workflows," which introduces flows of practical operations using functions of
the machine.
Driver Installation Guide
)) Provides instructions on installing the printer, fax, and other drivers.
Windows:
-- Printer Driver Installation Guide
-- Fax Driver Installation Guide
-- Color Network ScanGear 2 Installation Guide
Mac OS:
-- Canon Printer Driver Guide
-- Canon Fax Driver Guide
)) Included on the same CD-ROM as each driver.
To view the manual in PDF format, Adobe Reader/Acrobat Reader/Acrobat is required. If Adobe Reader/
Acrobat Reader/Acrobat is not installed on your system, please download it from the Adobe Systems
Incorporated website (http://www.adobe.com).
How to Use the e-Manual
Top Page of the e-Manual
2
How to Install the e-Manual
1
3
4
Windows
1.Insert the e-Manual CD-ROM in your computer.
2.Select the language for the e-Manual → click [Next].
If you select [Display], the e-Manual is displayed
without installation.
3.Read the License Agreement, and then click [Yes].
4.Select [Install].
NOTE
If the shortcut icon created on the Desktop or the
[index.html] file is double-clicked, the e-Manual is
displayed.
Macintosh
1.Insert the e-Manual CD-ROM into your computer.
2.Drag-and-drop the [iRADV_C350iF Manual_enu] folder
to the location you want to save the e-Manual.
3.Double-click the [index.html] file inside the [iRADV_
C350iF Manual_enu] folder to display the e-Manual.
NOTE
Depending on the operating system you are using, a
security protection message may appear. In this case,
allow the content to be displayed.
If the e-Manual (CD-ROM) Does Not Start
The CD-ROM auto run function may be disabled. In this
case, you must perform the following procedure.
Windows XP/Server 2003
1.Click [Start] on the taskbar → click [My Computer].
2.Double-click the e-Manual icon.
3.Double-click [Maninst.exe].
Windows Vista/7/Server 2008
1.Click [Start] on the taskbar → click [Computer].
2.Double-click the e-Manual icon.
3.Double-click [Maninst.exe].
Windows 8/Server 2012
1.Display the desktop → click the explorer icon on the
taskbar.
2.Click [Computer].
3.Double-click the e-Manual icon.
4.Double-click [Maninst.exe].
1 Select from functions
The instructions for each function and operation
method are described.
2 [Top], [Site map], [Help]
Links to the e-Manual's top page, site map, and help are
displayed.
3 [Glossary]
A link to the glossary is displayed.
4 First of all...
This section contains information needed to use the
machine, and information on optional products and
software.
Contents
Preface ........................................................................................... 04
How To Use This Manual ................................................... 04
Symbols Used in This Manual......................................... 04
Keys and Buttons Used in This Manual..................... 04
Displays Used in This Manual.......................................... 05
Illustrations Used in This Manual.................................. 05
Trademarks................................................................................. 05
Chapter 1
Installation of the Machine
Installation Location and Handling . ......................... 08
Installation Precautions...................................................... 08
Avoid Installing the Machine in the Following
Locations.............................................................................. 08
Select a Safe Power Supply........................................... 09
Moving the Machine........................................................ 09
Provide Adequate Installation Space. .................... 09
Handling Precautions.......................................................... 10
Installing the Machine ........................................................ 11
1 Carrying the Machine to the Installation Site... 11
2 Removing the Packing Materials.............................. 12
3 Checking Items Included with the Machine..... 14
4 Installing the Toner Cartridge..................................... 15
5 Loading Paper into the Paper Drawer for the
First Time.................................................................................. 15
6 Storing the Envelope Feeder Attachment in a
Paper Drawer......................................................................... 16
7 Attaching the Precaution Label. ............................... 16
8 Attaching the Glass Cleaning Sheet Storage Box.... 17
9 Connecting Cables............................................................ 17
10 Turning the Main Power ON..................................... 18
Chapter 2
Setting and Registering the Machine
Configuring the Machine (Setup Guide) . .................... 20
Changing Specified Settings ......................................... 28
Contents
Chapter 3
Before Using This Machine
Parts and Their Functions ................................................. 30
External View............................................................................. 30
Internal View.............................................................................. 31
Feeder............................................................................................ 32
Control Panel Parts and Functions. ............................. 32
Adjusting the Angle of the Control Panel........... 33
Main Power and Energy Saver Key ............................ 34
How to Turn ON the Main Power................................. 34
Energy Saver Key. ................................................................... 35
Shutting Down the Machine.......................................... 35
Backing Up/Exporting Data . .......................................... 36
Data You Can Import/Export All.................................... 36
Data You Can Import/Export Individually............... 36
Other Data You Can Import/Export/Back Up........ 37
Chapter 4
Routine Maintenance
Loading Paper .......................................................................... 40
Loading Paper into a Paper Drawer............................ 40
Loading Envelopes................................................................ 43
Checking the Types of Paper That Can Be Used.... 43
Replacement Parts ................................................................ 44
Replacing the Staple Cartridge (Staple Finisher-S1)... 45
Replacing the Toner Cartridge....................................... 46
Replacing the Waste Toner Container....................... 49
Replacing the Drum Unit. ................................................. 51
Consumables ............................................................................ 54
Recommended Paper. ........................................................ 54
Toner. ............................................................................................. 54
Drum Unit................................................................................... 55
Staple Cartridge. ..................................................................... 55
Genuine Supplies................................................................... 55
Chapter 5
Troubleshooting
Routine Cleaning . .................................................................. 58
Originals Cannot Be Scanned Properly
(Cleaning the Platen Glass)....................................................... 59
Scanned Originals Become Dirty
(Manual Feeder Cleaning)......................................................... 59
When White Streaks Appear on Prints
(Cleaning the Dust Proof Glass). .............................................. 60
When an Error Message/Error Code Is Displayed .... 62
When an Error Message Is Displayed......................... 62
When an Error Code Is Displayed................................. 62
Service Call Message ........................................................... 63
Contacting Your Local Authorized Canon Dealer... 64
Setting the Limited Functions Mode from the
Service Call Message Screen........................................ 64
Functions Available When the Printer/Scanner
Cannot Be Used Due to an Error............................... 65
Locations of Staple/Paper Jams ................................... 66
Chapter 6
Appendix
Specifications ............................................................................ 68
Main Unit..................................................................................... 68
Feeder............................................................................................ 71
Cassette Feeding Unit-AG1.............................................. 71
Cassette Feeding Unit-AH1.............................................. 72
Staple Finisher-S1................................................................... 72
Copy Card Reader-F1........................................................... 73
FAX Function............................................................................. 73
Send Function (Scan Features)............................................. 74
Send Function (E-Mail and I-Fax Features). ........................ 75
Network Environment (Hardware Specifications)......... 76
Network Environment (Software Specifications)........... 76
Printer Settings (Software Specifications).......................... 76
Legal Notices ............................................................................. 77
Product Name.......................................................................... 77
FCC (Federal Communications Commission) Users in the
U.S.A............................................................................................ 77
Laser Safety. ............................................................................... 78
International ENERGY STAR Program......................... 78
IPv6 Ready Logo...................................................................... 78
Information Security Standard (IEEE 2600).................. 78
Copyright. ................................................................................... 79
Disclaimers................................................................................. 79
Legal Limitations on the Usage of Your Product
and the Use of Images..................................................... 79
Users in the U.S.A.................................................................... 80
Users in Canada....................................................................... 81
Utilisation au Canada........................................................... 82
Super G3...................................................................................... 83
Important Safety Instructions ....................................... 84
Installation.................................................................................. 84
Power Supply............................................................................ 84
Handling...................................................................................... 85
Maintenance and Inspections........................................ 86
Consumables............................................................................ 87
Telephone Equipment........................................................ 88
Other Warnings. ...................................................................... 88
CANON imageRUNNER ADVANCE C350iF/C250iF
SERIES LIMITED WARRANTY.......................................... 89
TERMS OF imageWARE REMOTE SERVICE............... 90
TERMS OF Content Delivery System. ......................... 91
Contents
Preface
Thank you for purchasing the Canon imageRUNNER ADVANCE C350iF/C250iF. Please read this manual
thoroughly before operating the machine to familiarize yourself with its capabilities, and to make the most of
its many functions. For information on the detailed settings for the functions described in this manual, see the
e-Manual. After reading this manual, store it in a safe place for future reference.
How To Use This Manual
Symbols Used in This Manual
Keys and Buttons Used in This Manual
The following symbols are used in this manual to explain
procedures, restrictions, handling precautions, and
instructions that should be observed for safety.
The following symbols and key/button names are a
few examples of how keys and buttons to be clicked or
pressed are expressed in this manual:
WARNING
Indicates a warning concerning operations that may
lead to death or injury to persons if not performed
correctly. To use the machine safely, always pay
attention to these warnings.
CAUTION
Indicates a caution concerning operations that may
lead to injury to persons if not performed correctly. To
use the machine safely, always pay attention to these
cautions.
IMPORTANT
Indicates operational requirements and restrictions.
Be sure to read these items carefully to operate the
machine correctly, and avoid damage to the machine
or property.
NOTE
Indicates a clarification of an operation, or contains
additional explanations for a procedure. Reading these
notes is highly recommended.
Indicates an operation that must not be performed.
Read these items carefully, and make sure not to
perform the described operations.
04
)) Touch
Panel Display Keys: [Key Name]
Example: [Cancel]
)) Control
Panel Keys: Key Icon (Key Name)
Example:
(Start)
)) Buttons
on Computer Operation Screens: [Button Name]
Example: [OK]
Displays Used in This Manual
Trademarks
Screen shots of the touch panel display used in this
manual are those taken when the imageRUNNER
ADVANCE C350iF has the following optional equipment
attached to it:
"MEAP" is a trademark of CANON Inc., referring to an
"application platform" for Canon multifunction and
single function printers.
)) Cassette
Feeding Unit-AH1
)) Staple Finisher-S1
)) Web Access Software
Note that functions that cannot be used depending on
the model or options do not appear on the touch panel
display.
Keys to Press for Operation
This product contains the Universal Font Scaling
Technology or UFST® under license from Monotype
Imaging, Inc. UFST® is a trademark of Monotype Imaging,
Inc. registered in the United States Patent and Trademark
Office and may be registered in certain jurisdictions.
Apple, EtherTalk, LocalTalk, Mac, Macintosh, Mac OS, and
Safari are trademarks of Apple Inc., registered in the U.S.
and other countries.
Microsoft, Windows, Windows Vista, Windows Server,
Internet Explorer, Excel and PowerPoint are either
registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
The keys which you should press are marked with a
, as shown above. When multiple keys can be
pressed on the touch panel display, all keys are marked.
Select the keys, which suit your needs.
Screen shots used in this manual may differ from the
ones you actually see.
Illustrations Used in This Manual
Illustrations used in this manual are those displayed
when the imageRUNNER ADVANCE C350iF has the
following optional equipment attached to it:
)) Cassette
Feeding Unit-AH1
Adobe, PostScript, and the PostScript logo are either
registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
Copyright © 2007 -08 Adobe Systems Incorporated. All
rights reserved.
Protected by U.S. Patents 5,737,599; 5,781,785; 5,819,301;
5,929,866; 5,943,063; 6,073,148; 6,515,763; 6,639,593;
6,754,382; 7,046,403; 7,213,269; 7,242,415; Patents
pending in the U.S. and other countries.
All instances of the name PostScript in the text are
references to the PostScript language as defined by
Adobe Systems Incorporated unless otherwise stated.
The name PostScript also is used as a product trademark
for Adobe Systems' implementation of the PostScript
language interpreter.
Except as otherwise stated, any reference to a "PostScript
printing device," "PostScript display device," or similar
item refers to a printing device, display device or item
(respectively) that contains PostScript technology
created or licensed by Adobe Systems Incorporated
and not to devices or items that purport to be merely
compatible with the PostScript language.
05
Adobe, the Adobe logo, PostScript, the PostScript
logo, and PostScript 3 are either registered trademarks
or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
Linux is a registered trademark of Linus Torvalds.
Microsoft and Windows are either registered trademarks
or trademarks of Microsoft Corporation in the United
States and/or other countries.
All other trademarks are the property of their respective
owners.
The PDF logo is a trademark or registered trademark of
Adobe Systems Incorporated in the United States and
other countries.
Copyright © 2008 Adobe Systems Incorporated. All
rights reserved.
Protected by U.S. Patents 6,185,684; 6,205,549; 7,213,269;
7,272,628; 7,278,168; Patents pending in the U.S. and
other countries.
All instances of the name PostScript in the text are
references to the PostScript language as defined by
Adobe Systems Incorporated unless otherwise stated.
The name PostScript also is used as a product trademark
for Adobe Systems' implementation of the PostScript
language interpreter.
Except as otherwise stated, any reference to a "PostScript
printing device," "PostScript display device," or similar
item refers to a printing device, display device or item
(respectively) that contains PostScript technology
created or licensed by Adobe Systems Incorporated
and not to devices or items that purport to be merely
compatible with the PostScript language.
Adobe, the Adobe logo, Adobe LiveCycle® Policy Server,
PostScript, the PostScript Logo, and PostScript 3 are
either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other
countries.
06
All other trademarks are the property of their respective
owners.
Other product and company names herein may be the
trademarks of their respective owners.
1
Installation of the Machine
Installation Location and Handling................................................................................................................................................................. 08
Installation Precautions.......................................................................................................................................................................................... 08
Handling Precautions.............................................................................................................................................................................................. 10
Installing the Machine.............................................................................................................................................................................................. 11
1 Carrying the Machine to the Installation Site....................................................................................................................................... 11
2 Removing the Packing Materials.................................................................................................................................................................. 12
3 Checking Items Included with the Machine........................................................................................................................................ 14
4 Installing the Toner Cartridge......................................................................................................................................................................... 15
5 Loading Paper into the Paper Drawer for the First Time. .............................................................................................................. 15
6 Storing the Envelope Feeder Attachment in a Paper Drawer.................................................................................................... 16
7 Attaching the Precaution Label.................................................................................................................................................................... 16
8 Attaching the Glass Cleaning Sheet Storage Box.............................................................................................................................. 17
9 Connecting Cables. .............................................................................................................................................................................................. 17
10 Turning the Main Power ON......................................................................................................................................................................... 18
Installation Location and Handling
This section describes precautions for installation location and handling. We recommend that you read this
section prior to using this machine.
Installation Precautions
Avoid Installing the Machine in the Following
Locations
Avoid locations subject to temperature and
humidity extremes, whether low or high.
For example, avoid installing the machine near water
faucets, hot water heaters, humidifiers, air conditioners,
heaters, or stoves.
Avoid installing the machine in direct sunlight.
If this is unavoidable, use
curtains to shade the
machine. Be sure that the
curtains do not block the
machine's ventilation slots
or louvers, or interfere with
the electrical cord or power
supply.
Avoid locations where a considerable amount
of dust accumulates./Avoid locations where
ammonia gas is emitted./Avoid locations near
volatile or flammable materials, such as alcohol
or paint thinner.
Avoid poorly ventilated locations.
This machine generates a slight amount of ozone
etc. during normal use. Although sensitivity to ozone
etc. may vary, this amount is not harmful. Ozone etc.
may be more noticeable during extended use or long
production runs, especially in poorly ventilated rooms.
It is recommended that the room be appropriately
ventilated, sufficient to maintain a comfortable working
environment, in areas of machine operation. In addition,
do not install this machine where it exhausts directly
onto a person.
Avoid locations that are subject to vibration./
Avoid exposing the machine to rapid changes in
temperature.
If the room in which the
machine is installed is cold
but rapidly heated, water
droplets (condensation)
may form inside the
machine. This may result in
a noticeable degradation
in the quality of the copied
image, the inability to
properly scan an original, or
the copies having no printed image at all.
Avoid installing the machine near computers or
other precision electronic equipment.
Electrical interference and vibrations generated by
the machine during printing can adversely affect the
operation of such equipment.
Avoid installing the machine near televisions,
radios, or similar electronic equipment.
The machine might interfere with sound and picture
signal reception.
Insert the power plug into a dedicated power outlet,
and maintain as much space as possible between the
machine and other electronic equipment.
08
Installation Location and Handling
Contact an authorized Canon dealer if
communication is unavailable.
Depending on your locale or your telephone
connection, you may be unable to perform data
communication. In this case, contact your local
authorized Canon dealer.
Avoid installing the machine at high altitudes of
about 3,000 meters above sea level, or higher.
Machines with a hard disk may not operate properly
when used at high altitudes of about 3,000 meters
above sea level, or higher.
Moving the Machine
If you intend to move the machine, even to a location
on the same floor of your building, contact your local
authorized Canon dealer beforehand. Do not attempt to
move the machine yourself.
Provide Adequate Installation Space
Provide enough space on each side of the machine for
unrestricted operation.
When no optional products are attached:
4" (100)
Select a Safe Power Supply
)) Plug
(mm)
the machine into a 120 V AC outlet.
)) Make
sure that the power supply for the machine is
safe, and has a steady voltage.
35 3/4" (908)
)) Do
not connect other electrical equipment to
the same power outlet to which the machine is
connected.
20 1/8" (511)
35 5/8" (903)
)) Do
not connect the power cord to a multiplug power
strip, as this may cause a fire or electrical shock.
)) The
power cord may become damaged if it is stepped
on, affixed with staples, or if heavy objects are placed
on it. Continued use of a damaged power cord can
lead to an accident, such as a fire or electrical shock.
When the Staple Finisher-S1 is attached:
4" (100)
(mm)
)) The
power cord should not be taut, as this may lead
to a loose connection and cause overheating, which
could result in a fire.
)) If
excessive stress is applied to the connection part of
the power cord, it may damage the power cord or the
wires inside the machine may disconnect. This could
result in a fire. Avoid the following situations:
-- Connecting and disconnecting the power cord
frequently.
-- Tripping over the power cord.
-- The power cord is bent near the connection part,
and continuous stress is being applied to the power
outlet or the connection part.
-- Applying excessive force on the power plug.
35 3/4" (908)
20 1/8" (511)
57 3/8" (1,458)
Installation Location and Handling
09
Handling Precautions
)) Do
)) For
safety reasons, press
(Energy Saver) when it
will not be used for a long period of time, such as
overnight. As an added safety measure, turn OFF the
main power switch, and disconnect the power cord
when the machine will not be used for an extended
period of time, such as during consecutive holidays.
not attempt to disassemble or modify the machine.
)) Some
parts inside the
machine are subject
to high-voltages and
temperatures. Take
adequate precautions
when inspecting the
inside of the machine.
Do not carry out any
inspections that are not
described in the manuals
for this machine.
)) Be
careful not to spill liquid or drop any foreign
objects, such as paper
clips or staples inside
the machine. If a foreign
object comes into
contact with electrical
parts inside the machine,
it might cause a short
circuit and result in a fire
or electrical shock.
)) If
there is smoke, or unusual noise, immediately turn
the main power switch OFF, disconnect the power
cord from the power outlet, and then call your local
authorized Canon dealer. Using the machine in this
state may cause a fire or electrical shock. Also, avoid
placing objects around the power plug so that the
machine can be disconnected whenever necessary.
)) Do
not turn the main power switch OFF or open the
front covers while the machine is in operation. This
may result in paper jams.
)) Do
not use flammable sprays, such as spray glue, near
the machine. There is a
danger of ignition.
10
Installation Location and Handling
)) Use a modular cable that is shorter than 9' 10" (3 meters).
)) Use
a USB cable that is shorter than 9' 10" (3 meters).
Installing the Machine
This section describes how to install the machine. Make sure that you read this section prior to installing the
machine.
1
Carrying the Machine to the
Installation Site
CAUTION
)) Make
sure to grip the handles on the sides of the
machine firmly when lifting. Holding the machine in
an unspecified manner may result in personal injury
or damage to the machine.
01
Lift the machine with two or more
people by gripping the indented area on the
sides of the machine, and carry the machine
to the installation site.
)) Those
with back pain should check the weight of
the machine before lifting.
)) Make sure that you do not slip on the bag the
machine came in.
Installing the Machine
11
2
Removing the Packing Materials
3. Remove the packing materials attached to the paper
drawer.
When performing the following
steps, make sure to remove all
orange tape attached to the
machine.
01
Remove the items and packing
materials from the paper drawer.
1. Grip the handle, and pull out the paper drawer until
it stops.
2. Remove the box containing the included items.
02
Gently push the paper drawer back into
the machine.
CAUTION
When returning the paper drawer to its original
position, be careful not to get your fingers caught, as
this may result in personal injury.
03
Lift the feeder tray and remove the
Service Book Holder.
12
Installing the Machine
04Remove the protective sheets attached
to each part of the machine.
)) Platen
Glass
)) Control
)) Upper
Panel
Part of the Front Cover of the Main Unit
If you own the optional Cassette Feeding Unit-AG1/Cassette
Feeding Unit-AH1, carefully read "Attaching the Cassette
Feeding Unit to the Machine" and attach it to the machine.
Installing the Machine
13
3
Checking Items Included with the Machine
Check each item included with the machine against this list to ensure that nothing is missing.
CD-ROM
Paper Manual x 2
Power Cord
Modular Cable
Service Book Holder
Envelope Feeder Attachment
x4
x1
Glass Cleaning Sheet/Glass
Cleaning Sheet Storage Box/
Double-Sided Tape
14
Installing the Machine
Paper Size Labels
Precaution Labels
4
Installing the Toner Cartridge
04Insert the new toner cartridge.
01Open the front cover of the main unit.
02
Open the package of the toner
cartridge, and remove the toner cartridge.
1. Match the new toner cartridge with the slot on the
main unit as shown in the illustration.
2. Push the new toner cartridge in as far as possible.
03
Hold the new toner cartridge in both
hands as shown in the illustration, and shake
it vertically approximately 10 times.
NOTE
Support the toner cartridge with one hand from
underneath while pushing it into the machine with
the other hand.
05Close the front cover of the main unit.
CAUTION
When closing the cover, be careful not to get your
fingers caught, as this may result in personal injury.
9~10
5
Loading Paper into the Paper
Drawer for the First Time
IMPORTANT
For instructions on loading plain paper into the paper
drawer, see "Loading Paper into a Paper Drawer," on p.40.
Do not shake the toner cartridge in the direction
shown in the illustration. Doing so may cause the
toner to not output properly.
Installing the Machine
15
6
Storing the Envelope Feeder
Attachment in a Paper Drawer
Use the Envelope Feeder Attachment only when
loading envelopes to a paper drawer. When not using
the Envelope Feeder Attachment, store it in the storage
area of the paper drawer. For instructions on loading
envelopes, see e-Manual > Maintenance.
7
Attaching the Precaution Label
01Open the feeder.
01
Grip the handle, and pull out the paper
drawer until it stops.
02
Select the desired language label
among the supplied precaution labels, peel
off the label, then affix the label to the part
indicated in the illustration.
02
Store the Envelope Feeder Attachment
in the storage area of the paper drawer.
03
Gently push the paper drawer back into
the machine.
CAUTION
When returning the paper drawer to its original
position, be careful not to get your fingers caught, as
this may result in personal injury.
03Gently close the feeder.
CAUTION
Close the feeder gently to avoid catching your hands,
as this may result in personal injury.
16
Installing the Machine
8
Attaching the Glass Cleaning Sheet
Storage Box
This section describes how to attach the box for storing
sheets for cleaning the platen glass to the machine. It is
recommended that you attach the box to the location
indicated in the illustration.
9
Connecting Cables
01
Connect a modular cable into the
socket on the back left of the machine.
01
Attach the double-sided tape onto
the glass cleaning sheet storage box, and
remove the release liner from the doublesided tape.
02Connect a LAN cable into the socket on
the back right of the machine.
02Attach the box to the machine.
NOTE
Change the location to attach the box to depending
on the attached optional products.
Installing the Machine
17
10 Turning the Main Power ON
For Users with the Optional Finisher:
See the installation manual supplied with the optional
finisher to attach the finisher to the machine, then
connect the power cord.
01
Connect the power cord into the socket
on the back right of the machine and to the
wall outlet.
02Turn ON the main power.
1
2
The main power indicator on the control panel lights
when you turn ON the main power switch.
Various screens appear when system software is
loading.
NOTE
For instructions on turning the main power ON and
OFF, and on using the Energy Saver key, see "Main
Power and Energy Saver Key," on p.34.
18
Installing the Machine
2
Setting and Registering the Machine
Configuring the Machine (Setup Guide)............................................................................................................................................................ 20
Changing Specified Settings. .............................................................................................................................................................................. 28
Configuring the Machine (Setup Guide)
When the power is turned ON for the first time after installing the machine, the Setup Guide screen is
displayed. It is recommended that you follow the instructions that appear on the touch panel display to
configure the machine.
NOTE
cannot exit the Setup Guide until it is finished.
)) You can restart the Setup Guide from [Start Setup Guide] (
(Settings/Registration) > [Management Settings] >
[License/Other]).
)) You can change settings registered in the Setup Guide from the items in
(Settings/Registration). For more
information, see "Changing Specified Settings," on p.28.
)) For most settings in the Setup Guide, you can move to the next setting even without entering anything. Unset items
can be set separately. You can set them after finishing the Setup Guide.
)) If the power is turned OFF while using the Setup Guide, when you turn the power back ON, the Setup Guide is
automatically started. Perform Setup Guide settings once again.
)) Once the Setup Guide has been completed, it will not start up again when turning ON the machine.
)) You
01
02Registering the Information of Paper
1. Set the language and keyboard layout → press [OK].
1. Select the paper source that you want to set the
paper type for → press [Set].
Configuring the Touch Panel Display's
Language and Keyboard Layout
That Was Loaded When Installing the Machine
2. Select the paper type → press [OK].
If you select [Plain], you can select the paper weight
from [Plain Paper Weight Set.].
If there is no button for the loaded paper, press
[Detailed Settings] → select the paper type from the
detailed setting screen.
20
Configuring the Machine (Setup Guide)
03Logging In
04Setting the Date and Time
In order to continue on with network settings, date/time,
and fax settings, it is necessary to log in as an administrator.
To end setting configuration here, press [Skip] and see step 13.
1. Select the time zone from the <Time Zone> dropdown list.
2. Enter the current date and time using
(numeric keys) → press [OK].
–
1. Press [Log In] → enter the authentication information
→ press [Log in] → [OK].
▼
Enter the day and the month using four digits
(including zeros). The time is displayed in 24-hour
notation.
Examples:
May 6 → 0506
7:05 a.m. → 0705
11:18 p.m. → 2318
If you make a mistake when entering values, press
(Clear) → enter the values again, starting with the
month.
NOTE
standard time zones of the world are expressed
globally in terms of the difference in hours (± up
to 12 hours) from GMT (± 0 hours). A time zone is a
region throughout which this time difference is the
same.
)) If you set Daylight Saving Time, specify both the
starting and ending date in [Start Date] and [End
Date]. The machine automatically sets the standard
time of the machine one hour forward at the
specified date and time.
)) The date/time settings can be changed after
finishing the Setup Guide. For more information, see
e-Manual > Settings/Registration.
)) The
IMPORTANT
The default setting for both the System Manager
ID and System PIN is '7654321'. After installing the
machine, when logging in for the first time, enter
'7654321' for both the System Manager ID and System
PIN.
Configuring the Machine (Setup Guide)
21
05Setting an IP Address
You can perform the following settings in order to
connect to and use a TCP/IP network with the machine.
Set IPv4 here.
)) To
enable DHCP:
When connecting to a network where each machine's
IP address is automatically assigned to it by DHCP, set
<DHCP> to 'On'.
1. Set <Use IPv4> to 'On' → set <Use IPv6> to 'Off' →
press [Next].
2. Specify each setting → press [OK].
)) For
manual entry:
When the network administrator connects to a
network where each machine has a fixed IP assigned
to it, the IP address must be set manually.
If you do not know the IP, contact your administrator.
22
Configuring the Machine (Setup Guide)
NOTE
By setting <Auto IP> to 'On', you can have the
machine automatically search the network (LAN)
being used for usable IP addresses and assign one to
the machine. This function bypasses the DHCP server
to automatically assign IP addresses, however the
machine cannot communicate over the router when
using this function.
06Setting the DNS Server
2. Enter [Host Name] and [Domain Name] for <IPv4> →
press [Next].
DNS is the abbreviation of Domain Name System, and is
the function that binds an IP address and a name (in this
machine, host name). By setting the DNS server address
for this machine, when accessing this machine through
the network, this machine is accessed not by IP address
but by a name such as "iR-ADV XXXX."
When using DHCP, the IP address may change, so it
is necessary to update IP addresses bound to names.
In these cases, it is necessary to configure "Dynamic
Update" to update the links between IP addresses and
names.
A dynamic DNS server is required to use DNS Dynamic
Update.
This section describes how to specify the IPv4 settings.
[Host Name]:
The name that appears on the network (the machine's
name, etc.)
1. Specify the following settings in <IPv4> → press
[Next].
[Domain Name]:
The network domain that this machine belongs to
3. Specify <DNS Dynamic Update> for <IPv4> → press
[OK].
)) To
enable DNS Dynamic Update:
Enter the DNS server IPv4 address in [Primary DNS
Server].
)) To
disable DNS Dynamic Update:
Enter [Primary DNS Server] and [Secondary DNS
Server].
By setting <DNS Dynamic Update> to 'On', DNS
Dynamic Update is enabled.
NOTE
Secondary DNS Server:
The substitute DNS server that is used when the
primary DNS server cannot be used. If you do not
want to set the secondary DNS server, enter '0.0.0.0'.
When using DNS Dynamic Update, setting this is not
necessary.
Configuring the Machine (Setup Guide)
23
07Setting the Proxy Server
08Setting Country/Region
If accessing the internet or other external network
through a proxy server from this machine, these settings
are required.
1. Select the country/region where the machine is
located → press [Next].
[Server Address]:
Enter the IP address of the proxy server or the path of
the server (i.e., starfish.company.com).
[Port Number]:
Enter the port number of the proxy server.
<Use Proxy within the Same Domain>:
If using the proxy within the same domain, press [On].
[Set Authentication]:
If authentication is required when accessing an
external network through a proxy server, enter the
user name and password registered on the server.
[User Name]:
Enter the user name for the proxy authentication.
[Password]:
Enter the password for the proxy authentication.
24
Configuring the Machine (Setup Guide)
NOTE
This setting is necessary to specify the fax line settings.
This setting can only be carried out in the Setup
Guide.
09Registering Your Machine's Fax Number
This section describes how to register the fax number
your machine uses when sending faxes. This number is
printed on the document that you fax to the receiving
party.
1. Enter the fax number → press [Next].
10Registering the Unit Name
The unit's name appears on the receiving party's fax
machine, or is printed on the received document as
the Sender Name. You can register the name of your
company or department as the unit name.
1. Press [Set] → enter the unit name → press [Next].
12Specifying the System Manager
Information Settings
You can register the System Manager Information
settings.
1. Change the authentication information → press
[Next] → enter information if necessary → press [OK].
▼
11Setting the Line Type
You can set the phone line type to use for sending.
1. Select the line type → press [OK].
IMPORTANT
The default setting for both the System Manager ID
and System PIN is '7654321'. Make sure to change
these settings.
Configuring the Machine (Setup Guide)
25
13Adjusting the Gradation and Density
Settings of the Machine
This procedure involves outputting test pages and
placing them on the platen glass for scanning. Finishing
this procedure enables you to reduce irregularities by
automatically adjusting the gradation, density, and color
of images printed by the machine. Perform a full adjust.
IMPORTANT
types of paper, which can be used with [Auto
Adjust Gradation] are Thin, Plain 1, Plain 2, Recycled
1, and Recycled 2. Do not use other types of paper.
)) It is recommended that you select [Full Adjust]
when performing an automatic gradation
adjustment. Select [Quick Adjust] for a quick, but
less complete adjustment between regular full
adjustment recalibrations.
)) Make sure that you place the test pages properly.
Accurate recalibrations of the gradation, density,
and color settings of the machine cannot be made
if the test pages are not scanned correctly.
)) Two test pages are output by the machine during
this adjustment. This machine adjusts the toner and
print speed according to the paper type. To make
effective adjustments, select the correct paper type.
3. Press [Start Printing].
NOTE
If paper appropriate for the test page is not loaded
in any paper source, a message asking you to load
the appropriate paper appears. Load the appropriate
paper in a paper source.
4. Place the test page on the platen glass → press [Start
Scanning].
)) The
1. Press [Full Adjust].
*
*Place the test page face down on the platen glass, while aligning the
corner where the black test patterns are located with the arrow on the
top left corner of the platen glass.
5. Remove the test page from the platen glass → press
[Start Printing].
Repeat steps 4 and 5.
2. Select the paper source → press [OK].
26
Configuring the Machine (Setup Guide)
14Closing the Setup Guide
Closing the Setup Guide by pressing [OK] causes the
machine to restart.
After the restart, the main menu is displayed and you
can use the machine.
▼
Configuring the Machine (Setup Guide)
27
Changing Specified Settings
You can change settings registered in the Setup Guide from the items in (Settings/Registration). From
[Start Setup Guide] (Settings/Registration), you can start the Setup Guide and redo all the settings from the
beginning. (See e-Manual > Security.) For more information on changing the settings, see the following.
Setting Description
Location in e-Manual
Language, keyboard layout
Settings/Registration > Preferences > Display Settings > Changing the Display Language/
Keyboard on the Touch Panel Display
Information on the paper loaded in
the paper source
Settings/Registration > Preferences > Paper Settings > Registering the Paper Size and Type
for a Paper Source
Date/time
Settings/Registration > Preferences > Timer/Energy Settings > Current Date and Time
When setting IPv4:
Network settings, DNS server settings
Network > TCP/IP Network Setup Procedures > Protocol Settings > TCP/IPv4 Settings
When setting IPv6:
Network > TCP/IP Network Setup Procedures > Protocol Settings > TCP/IPv6 Settings
Proxy Settings
Network > TCP/IP Network Setup Procedures > Protocol Settings > Settings Common to
TCP/IPv4 and TCP/IPv6
Fax number of the machine
Unit name of the machine
Settings/Registration > Function Settings > Send > Specifying the Fax Settings > Fax Line
Settings
Telephone line type
System Manager Settings
Security > Restricting Access by Authentication > Specifying the System Manager Settings
Automatic Gradation Adjustment
Settings/Registration > Adjustment/Maintenance > Adjust Image Quality > Automatic
Gradation Adjustment
NOTE
To change [Country/Region], you must change it from [Start Setup Guide] (Settings/Registration).
28
Changing Specified Settings
3
Before Using This Machine
Parts and Their Functions....................................................................................................................................................................................... 30
External View................................................................................................................................................................................................................. 30
Internal View. ................................................................................................................................................................................................................ 31
Feeder. .............................................................................................................................................................................................................................. 32
Control Panel Parts and Functions.................................................................................................................................................................. 32
Main Power and Energy Saver Key.................................................................................................................................................................. 34
How to Turn ON the Main Power..................................................................................................................................................................... 34
Energy Saver Key........................................................................................................................................................................................................ 35
Shutting Down the Machine.............................................................................................................................................................................. 35
Backing Up/Exporting Data.................................................................................................................................................................................. 36
Data You Can Import/Export All....................................................................................................................................................................... 36
Data You Can Import/Export Individually................................................................................................................................................... 36
Other Data You Can Import/Export/Back Up........................................................................................................................................... 37
Parts and Their Functions
This section provides you with the names and functions of all the parts of the machine. For more information
on optional products, parts and their functions, see e-Manual > Optional Products/Software.
External View
When the Staple Finisher-S1 and Cassette Feeding Unit-AH1 are attached. When the Copy Card Reader-F1 and Cassette
Feeding Unit-AH1 are attached.
1
6
2
7 8 9
10
11
3
4
5
12
14
1 Glass Cleaning Sheet Storage Box
Use this box to store sheets for
cleaning the platen glass.
2 Feeder
Originals placed in the feeder are
automatically fed sheet by sheet to
the scanning area. The feeder also
automatically turns over two-sided
originals to make one- or two-sided
copies.
3 Control Panel
The control panel includes the keys,
touch panel display, and indicators
required for operating the machine.
(See "Control Panel Parts and
Functions," on p.32.)
4 Paper Drawer 1
Holds up to 550 sheets of paper (21
lb bond (80 g/m2)).
5 LINE 1
Use this port to connect a fax line to
the machine.
30
Parts and Their Functions
6 Output Tray
Prints are output to this tray if the
optional Staple Finisher-S1 is not
attached.
7 USB Port (1)
Use the USB port to connect USB
memory, external hard disks, and
other devices to the machine.
8 Right Cover of the Main Unit
Open this cover when clearing a
paper jam inside the main unit. (See
e-Manual > Problem Solving.)
9 Multi-Purpose Tray
Use the multi-purpose tray to feed
paper manually, and for loading
nonstandard paper stock, such as
envelopes. (See e-Manual > Basic
Operations.)
10 LAN Port
Use an Ethernet cable to connect
the machine to a network.
13
11 USB Port (2)
Use the USB port to connect
external hard disks and other
devices to the machine. You can
also connect the machine to a
computer using a USB cable.
12 Main Power Switch
Press to the "I" side to turn ON the
machine. (See "Main Power and
Energy Saver Key," on p.34.)
13 Right Cover of the Paper Drawer
Open this cover when clearing
a paper jam. (See e-Manual >
Problem Solving.)
14 Toner Code
This code indicates the type of
genuine toner that can be used
with the machine. Use toner with a
code that includes the same letters
as the code on the front cover of
the machine.
Internal View
When the Copy Card Reader-F1 and Cassette Feeding Unit-AH1 are attached.
4
5
3
6
8
2
1
7
1 Front Cover of the Main Unit
Open this cover to replace the toner cartridge, the waste
toner container, and the drum unit.
2 Dust Proof Glass Cleaner
Use this cleaner when cleaning the dust proof glass.
3 Waste Toner Container
When the waste toner container becomes full, replace
it with a new one. (See "Replacing the Waste Toner
Container," on p.49.)
4 Toner Cartridge
When toner runs out, pull out the toner cartridge and
replace it with a new one. (See "Consumables," on p.54.)
5 Fixing Assembly
The unit that fixes toner onto paper. If paper is jammed
in the fixing assembly, remove the fixing assembly from
the machine and then carefully remove the jammed
paper.
6 Duplexing Unit
If paper is jammed in the duplexing unit, remove the
paper jam. (See e-Manual > Problem Solving.)
7 Drum Unit
The unit that applies toner to paper during printing. (See
e-Manual > Maintenance.)
8 Envelope Feeder Attachment
Use when loading envelopes in a paper drawer.
Envelope Feeder Attachment can only be used in Paper
Drawer 1. For instructions on attaching the Envelope
Feeder Attachment, see e-Manual > Maintenance.
Parts and Their Functions
31
Feeder
1
2
3
6
5
4
1 Feeder Cover
Open this cover to remove jammed paper.
4 Original Output Area
Originals that have been scanned from the original
supply tray are output into the original output area.
2 Slide Guides
Adjust these guides to match the width of the original.
5 Document Feed Scanning Area
Originals placed in the feeder are scanned here.
3 Original Supply Tray
Originals placed here are automatically fed sheet by
sheet into the feeder. Place originals into this tray with
the surface that you want to scan face up.
6 Platen Glass
Place originals here when scanning books, heavyweight
originals, transparencies, etc.
Control Panel Parts and Functions
2
3
4
5
17
1
16
18
19
6
7
8
9
15
14
32
Parts and Their Functions
13
12 11 10
Control Panel Parts and Functions
1 [Main Menu]
Press to display the Main Menu screen. If the Main
Menu screen is not displayed when using a function,
it is necessary to press [Main Menu] before using the
function.
2 Touch Panel Display
The settings screen for each function is shown on this
display. Six function keys are displayed by default.
3 Settings/Registration key
Press to specify settings/registration.
4 Energy Saver key
Press to set or cancel the Sleep mode. Lights when the
machine enters the Sleep mode. For more information
on the Auto Sleep mode, see "Main Power and Energy
Saver Key," on p.34.
5 Numeric keys
Press to enter numerical values.
6 Clear key
Press to clear entered values or characters.
7 ID (Log In/Out) key
Press to log in/out when a login service such as
Department ID Management or SSO-H has been set.
8 Stop key
Press to stop a job in progress, such as a scan, copy, or
fax (scanning only) job.
14 Edit Pen
Use when operating the touch panel display, such as to
enter characters.
15 [Status Monitor/Cancel]
Press to check the status of jobs or to cancel print jobs.
Also, you can check the status of the machine such as
the amount of paper remaining in the paper source.
16 [Quick Menu]
Press to display functions registered in the Quick Menu.
17 Brightness Adjustment Dial
Use to adjust the brightness of the touch panel display.
18 Volume Settings key
Press to display the screen for adjusting settings, such
as the transmission volume and fax sending/receiving
alarm volume.
19 Counter Check key
Press to display the copy and print count totals on the
touch panel display.
Adjusting the Angle of the Control Panel
The angle of the control panel is adjustable as shown
below.
9 Start key
Press to start an operation.
10 Main Power Indicator
Lights when the main power is turned On.
11 Error Indicator
Flashes or lights if there is an error in the machine.
When the Error indicator flashes, follow the instructions
that appear on the touch panel display. When the Error
indicator maintains a steady red light, contact your local
authorized Canon dealer.
IMPORTANT
Do not apply excess force to the control panel when
adjusting its angle.
12 Processing/Data Indicator
Flashes or blinks green when the machine is performing
operations, and maintains a steady green light when fax
data is stored in memory.
13 Reset key
Press to restore the standard settings of the machine.
Parts and Their Functions
33
Main Power and Energy Saver Key
This section describes how to use the main power switch and the Energy Saver key.
How to Turn ON the Main Power
Make sure that the power plug is firmly inserted into the
power outlet.
WARNING
Do not connect or disconnect the power cord with
wet hands, as this may result in electrical shock.
IMPORTANT
If you want to turn OFF the main power and then back
ON again, wait for at least 10 seconds after the main
power indicator is turned OFF before turning ON the
main power. However, when [Quick Startup Settings
for Main Power] is enabled, if you do not wait more
than 20 seconds after the main power indicator is
turned OFF, quick startup is not performed.
01
Press the switch to the "I" side to turn
the main power ON.
1
2
The main power indicator on the control panel lights
when you turn ON the main power switch.
Various screens appear when system software is
loading.
If you are using a login service, log in using the
procedure for the login service you are using.
34
Main Power and Energy Saver Key
NOTE
can change the default display that appears
after the machine is turned ON from [Default
Screen after Startup/Restoration] on the Settings/
Registration screen. (See e-Manual > Settings/
Registration.)
)) If this machine is connected to a powered off
Macintosh computer by USB cable, the computer
may turn on automatically when this machine
does. In this case, disconnect the USB cable from
the machine. You may also be able to solve this
problem by using a USB hub between the machine
and the Macintosh.
)) The response of the buttons and keys may not be
optimal immediately after you turn ON the main
power of the machine.
)) If you set [Quick Startup Settings for Main Power]
to 'On' in [Preferences] (Settings/Registration), the
tone sounds when turning ON the main power of
the machine. (Depending on the situations, the
machine does not startup quickly and the tone
does not sound.)
)) Depending on the conditions under which the
machine is being used, the machine may not
startup quickly if you set [Quick Startup Settings
for Main Power] to 'On'. For more information, see
e-Manual > Settings/Registration.
)) If you are using Department ID Management with
the Copy Card Reader-F1, see e-Manual > Optional
Products/Software.
)) If you are using Department ID Management, see
e-Manual > Basic Operations.
)) If you are using SSO-H, see e-Manual > Basic
Operations.
)) You
Energy Saver Key
Shutting Down the Machine
You can press
(Energy Saver) to make the machine
enter the Sleep mode and reduce power consumption.
This machine performs a procedure to protect the
memory when the machine is shut down.
If the machine is idle for a certain period of time, the
machine will enter the Auto Sleep mode to minimize
energy consumption.
This enables the machine to be shut down safely,
even if there are any jobs being processed, or a MEAP
application is running while the machine is shutting
down.
Press
(Energy Saver) to cancel the Sleep mode and
resume normal machine operations.
01Press the switch to the "
the main power OFF.
" side to turn
1
NOTE
The machine can receive and print documents from a
personal computer when it is in the Sleep mode. I-fax
and fax documents can also be received while the
machine is in the Sleep mode.
2
IMPORTANT
)) Do
not turn the main power OFF while using the
Fax/I-Fax function. Sending or receiving I-fax or fax
documents cannot be done when the main power
is turned OFF.
)) The machine may take some time to completely
shutdown. Do not unplug the power cord until the
main power indicator of the machine is OFF.
)) If the main power is turned OFF during scanning or
printing, a paper jam may occur.
NOTE
[Quick Startup Settings for Main Power] in
[Preferences] (Settings/Registration) and [Sleep
Mode Alert], which appears when you press
on the control panel, are both set to 'On', the tone
sounds when turning OFF the main power of
the machine. (Depending on the situations, the
machine does not startup quickly and the tone
does not sound.)
)) You can shut down the machine from the Remote
UI using the Remote Shutdown mode. For more
information, see e-Manual > Remote UI.
)) If
Main Power and Energy Saver Key
35
Backing Up/Exporting Data
Various data such as the received data, address book, and Settings/Registration settings are stored on the
hard disk of the machine. A malfunction in the hard disk may cause these data to be lost. Please regularly back
up/export your important data. Please note that Canon will not be held responsible for any damages caused
by the loss of data. You can backup/export data in the following ways:
)) Import/Export
)) Import/Export
All
Individually
Data you can back up/export are described below.
Data You Can Import/Export All
You can save/load multiple items at once. In addition,
you can exchange data with this machine and other
machines which support the Import/Export All function.
IMPORTANT
You cannot use the Import All function, depending on
the recipient's machine model. For more information,
contact your local authorized Canon dealer.
Data
References
Settings/Registration Basic
Information
Data
References
Address Lists
Device Settings (Forwarding
Settings, Address Book, Send
Function Favorite Settings)
e-Manual > Remote UI
Paper Information
Web Access Favorites
Forwarding Settings
Box Settings
Department ID Management
Settings
e-Manual > Remote UI
Web Access Settings
Favorite Settings
Address Book
Quick Menu Settings
MEAP Application Setting
Information
User Setting Information
36
You can save/load data individually. In addition, you can
exchange data with this machine and other machines
which do not support the Import/Export All function.
Printer Settings
Paper Type Management
Settings
Main Menu Settings
Data You Can Import/Export
Individually
Backing Up/Exporting Data
e-Manual > Web Access
Other Data You Can Import/Export/
Back Up
You can exchange data with this machine and other
machines which do not support the Import/Export All
function.
Data
Quick Menu Information
Data
Relating
to MEAP
References
e-Manual > Quick
Menu
License files for MEAP
applications
e-Manual > MEAP
Data saved from MEAP
applications*1
Instruction
manuals for each
MEAP application
User authentication
information registered
for the Local Device
Authentication system
of SSO-H (Single SignOn H)
e-Manual > MEAP
*1 You may be able to back up data stored by MEAP applications,
depending on the application.
NOTE
passwords and PIN are backed up at the same
time. However, some of the passwords may not be
backed up, depending on the type of the password.
)) If your machine is not connected to a network, it is
recommended that you print and store important
information such as the Address Book. (See
e-Manual > Basic Operations.)
)) The
Backing Up/Exporting Data
37
38
Backing Up/Exporting Data
4
Routine Maintenance
Loading Paper. ............................................................................................................................................................................................................... 40
Loading Paper into a Paper Drawer................................................................................................................................................................ 40
Loading Envelopes.................................................................................................................................................................................................... 43
Checking the Types of Paper That Can Be Used..................................................................................................................................... 43
Replacement Parts...................................................................................................................................................................................................... 44
Replacing the Staple Cartridge (Staple Finisher-S1)..................................................................................................................................... 45
Replacing the Toner Cartridge........................................................................................................................................................................... 46
Replacing the Waste Toner Container........................................................................................................................................................... 49
Replacing the Drum Unit...................................................................................................................................................................................... 51
Consumables................................................................................................................................................................................................................... 54
Recommended Paper............................................................................................................................................................................................. 54
Toner.................................................................................................................................................................................................................................. 54
Drum Unit....................................................................................................................................................................................................................... 55
Staple Cartridge.......................................................................................................................................................................................................... 55
Genuine Supplies....................................................................................................................................................................................................... 55
Loading Paper
If the selected paper runs out, or the selected paper drawer runs out of paper during printing, a screen
prompting you to load paper appears on the touch panel display.
CAUTION
When handling paper, take care not to cut your hands on the edges of the paper.
Loading Paper into a Paper Drawer
When loading paper into the paper drawer for the first
time, or when a message is displayed on the touch
panel display prompting you to load paper, follow the
procedure below.
IMPORTANT
)) A
screen prompting you to load paper also appears
if the paper drawer is not fully inserted into the
machine. Make sure that the paper drawer is
properly in place.
)) Do not load the following types of paper into the
paper drawers. Doing so may cause a paper jam.
-- Severely curled or wrinkled paper
-- Thin straw paper
-- Paper which has been printed on using a thermal
transfer printer
-- The reverse side of paper which has been printed
on using a thermal transfer printer
)) Fan the stack of paper well before loading it.
Paper such as thin paper, recycled paper, prepunched paper, and heavy paper should be fanned
particularly well before loading it.
)) Never place paper or any other items in the empty
part of the drawer next to the paper stack. Doing so
may cause paper jams.
)) When you are printing in the Staple mode, do not
remove the output sheets that are waiting to be
stapled. (Printing and stapling resume after you
clear the paper jam.)
40
Loading Paper
NOTE
)) Register
the size and type of the loaded paper
in [Paper Settings] in [Preferences] (Settings/
Registration).
)) You can use custom paper sizes. (See e-Manual >
Settings/Registrations.)
)) You can name, register, and edit custom paper
types. (See e-Manual > Settings/Registrations.)
)) For information on paper that can be loaded, see
e-Manual > Basic Operations.
)) Paper Drawer 2 can be used if the optional Cassette
Feeding Unit-AG1 or the Cassette Feeding Unit-AH1
is attached.
)) Paper Drawers 3 and 4 can be used if the optional
Cassette Feeding Unit-AH1 is attached.
)) If a message prompting you to load paper
appears while printing, the remaining prints are
automatically made after you load the correct
paper. If you select a different paper drawer, the
remaining prints are made after you press [OK].
)) Press [Cancel] to cancel printing.
01Grip the handle, and pull out the paper
drawer until it stops.
NOTE
When using inch paper, remove the A4 Feeder
Attachments attached to the paper drawer and store
them in the storage space. When using A or B series
paper, make sure to attach the A4 Feeder Attachments
to the paper drawer. And then, select the paper series
that you are going to use in [Paper Size Group for
Auto Recog. in Drawer] (Settings/Registration). (See
e-Manual > Settings/Registration.)
)) A4
02
When loading paper into the paper
drawer for the first time, or when changing
the paper size, adjust the position of the
paper drawer guides.
1. Slide the left guide while squeezing it on the top to
align it with the mark for the desired paper size.
)) LTR/LGL
2. Slide the front guide while squeezing it on the top to
align it with the mark for the desired paper size.
1
2
IMPORTANT
Slide the guides until they click into place. If the left
guide and front guide are not aligned correctly, the
paper size will not correctly appear on the touch
panel display. It is also necessary to adjust the guides
correctly to avoid causing a paper jam, dirty prints, or
making the inside of the machine dirty.
Loading Paper
41
03Prepare the paper to load.
Open the packaging for the paper and remove the
paper stack.
CAUTION
When returning the paper drawer to its original
position, be careful not to get your fingers caught, as
this may result in personal injury.
IMPORTANT
)) Paper
which is curled must be straightened out
before loading it into the paper drawer.
)) You will not be able to make copies or print if you
load paper that exceeds the loading limit mark ( ),
or if the paper drawer is not completely pushed into
the machine.
)) Make sure that the height of the paper stack does
not exceed the loading limit mark ( ).
)) Always check that the paper drawers are in place.
NOTE
paper drawer holds up to 550 sheets of paper
(21 lb bond (80 g/m2)) or 640 sheets of paper (17 lb
bond (64 g/m2)).
)) If there are instructions on the paper package
about which side of the paper to load, follow those
instructions.
)) When the paper is loaded into the paper drawer,
the side facing up is the one printed on.
)) If problems, such as poor print quality or paper
jams occur, try turning the paper stack over and
reloading it.
)) Rewrap any remaining paper in its original package,
and store it in a dry place, away from direct sunlight.
)) If paper runs out and printing is stopped, load a
new paper stack. Printing restarts after the new
paper stack is loaded.
)) Each
NOTE
high-quality printouts, use paper recommended
by Canon.
)) Before loading paper, always fan the sheets several
times, and align the edges to facilitate feeding.
)) For
04
Load the paper stack into the paper
drawer.
1. Make sure that the paper size setting of the paper
drawer matches the size of the paper to load in the
paper drawer.
2. Load the paper stack against the right wall of the
paper drawer.
3. Gently push the paper drawer back into the machine.
1,2
3
42
Loading Paper
)) If
you print on the paper which has absorbed
moisture, steam may come out from the output
area of the machine. This is because the moist on
the paper evaporates when the high temperature is
applied when a toner is fixed to the paper. It is not a
malfunction. (This especially happens in low room
temperature.)
05When loading paper into the paper
drawer for the first time, or when changing
the paper size, attach a paper size label to
the paper drawer.
Loading Envelopes
If you are loading envelopes, the Envelope Feeder
Attachment that comes with the paper drawer must
be attached. For instructions on loading envelopes, see
e-Manual > Maintenance.
Checking the Types of Paper That Can
Be Used
For more information on the types of paper you can use,
see e-Manual > Basic Operations.
When not loading envelopes to a paper drawer, store the
Envelope Feeder Attachment in the storage area of the
paper drawer. For information on storing the Envelope
Feeder Attachment, see "6 Storing the Envelope Feeder
Attachment in a Paper Drawer," on p.16.
IMPORTANT
The paper size labels included with the machine
contain paper sizes not supported by the machine.
06
If the paper has been changed, register
the size and type of the loaded paper.
Register the size and type of paper you loaded in
the paper drawer in [Paper Settings] in [Preferences]
(Settings/Registration). For more information, see
e-Manual > Settings/Registration.
Loading Paper
43
Replacement Parts
This section describes those parts that require replacement and their model numbers. Use a replacement part
after checking its model number.
4
3
2
1
1 Waste Toner Container
Model Number: WT-201
3 Toner Container
Model Number:
2 Drum Unit
Canon GPR-51 Toner Black
Model Number:
Canon GPR-51 Toner Cyan
Canon GPR-51 Drum Unit Black
Canon GPR-51 Toner Magenta
Canon GPR-51 Drum Unit Cyan
Canon GPR-51 Toner Yellow
Canon GPR-51 Drum Unit Magenta
Canon GPR-51 Drum Unit Yellow
4 Staple Cartridge
Model Number: Staple-P1
For instructions on replacing parts 1, 2, 3, and 4, see the
following page.
44
Replacement Parts
Replacing the Staple Cartridge
(Staple Finisher-S1)
This section describes how to replace the staple case
and staple cartridge in the stapler unit. When the Staple
Finisher-S1 is almost out of staples and the staple
cartridge must be replaced, a screen prompting you
to replace the staple cartridge appears on the touch
panel display. Follow the procedure described below to
replace the staple cartridge.
NOTE
Staple Finisher-S1 is an optional product.
)) We recommend that you order staple cartridges
from your local authorized Canon dealer before
your stock runs out.
)) Use only staple cases intended for use with this
machine.
03Squeeze and lift the empty staple
cartridge by its sides marked with arrows to
remove it from the staple case.
)) The
01Open the front cover of the finisher.
NOTE
You can lift the staple cartridge only when no staples
are left inside the cartridge.
04
Insert a new staple cartridge into the
staple case.
02Grasp the staple case by the green tab
to pull it out from the stapler unit.
IMPORTANT
)) Use
only staple cartridges designed for use with this
machine. (See "Consumables," on p.54.)
)) Only one staple cartridge can be inserted at a time.
*
*Staple Case
Replacement Parts
45
05Return the staple case to its original
position in the stapler unit.
Replacing the Toner Cartridge
When the Black toner or all of the toners run out
completely and prints can no longer be made, a
screen with instructions on how to replace the toner
cartridge appears on the touch panel display. Follow
the procedure described below to replace the toner
cartridge.
If you press [Close], you can continue operations, such as
setting modes and scanning originals, even if you do not
replace the toner cartridge immediately.
06Close the front cover of the finisher.
CAUTION
When closing the front cover of the finisher, be careful
not to get your fingers caught, as this may result in
personal injury.
NOTE
After the cover is closed, the stapler unit may
automatically perform a "dry" stapling operation to
reposition the staples.
WARNING
)) Do
not burn or throw used toner cartridges into
open flames, as this may cause the toner to ignite,
resulting in burns or a fire.
)) If you accidentally spill or scatter toner, carefully
wipe up the loose toner with a damp, soft cloth and
avoid inhaling any toner dust. Do not use a vacuum
cleaner that is not equipped with safety measures
to prevent dust explosions to clean up loose toner.
Doing so may cause damage to the vacuum cleaner
or result in a dust explosion due to static discharge.
CAUTION
)) Keep
toner out of the reach of small children.
toner is ingested, consult a physician immediately.
)) If toner gets onto your hands or clothing, wash
it off immediately with cold water. Washing it off
with warm water will set the toner, and make it
impossible to remove the toner stains.
)) If
46
Replacement Parts
IMPORTANT
)) Use
only toner cartridges intended for use with this
machine.
)) For information on the supported Canon genuine
toner, see "Replacement Parts," on p.44.
)) Do not replace toner cartridges until the message
prompting you to do so appears.
)) Do not attempt to replace the toner cartridge while
the machine is printing.
)) The color of the toner to be replaced is displayed on
the touch panel display. If multiple toner cartridges
must be replaced, replace the toner cartridges in
the following order: Black, Yellow Magenta, Cyan.
)) If you continue copying or printing in black-andwhite after cyan, magenta, or yellow toner runs out,
do not remove the depleted toner cartridges from
the machine.
)) You can set the machine to display a message
indicating that the remaining toner is low. (See
e-Manual > Settings/Registrations.)
NOTE
)) Complete
instructions on how to replace the toner
cartridge can be accessed by pressing [Previous] or
[Next] on the touch panel display.
)) If toner runs out during a print job, the remaining
prints are made after you replace the toner
cartridge.
)) If black toner is left, you can continue copying and
printing in black-and-white.
)) After replacing toner cartridges, if printed colors
are different from the colors printed before you
replaced the toner cartridges, perform [Auto Adjust
Gradation] in [Adjustment/Maintenance]. (See
e-Manual > Settings/Registrations.)
01Press
.
NOTE
If the Black toner or all of the toners run out, this step
is not necessary.
02
Remove the toner cartridge of the
displayed color.
1. Open the front cover of the main unit.
2. Pull out the toner cartridge to replace.
2
1
Pull the toner cartridge out halfway, and then remove
it completely while supporting it and keeping it
straight with your other hand from underneath.
WARNING
Do not burn or throw used toner cartridges into open
flames, as this may cause the toner remaining inside
the cartridges to ignite, resulting in burns or a fire.
IMPORTANT
Do not subject the toner cartridge to shock or hit it.
Doing so may cause the toner cartridge to leak.
Replacement Parts
47
03Prepare the new toner cartridge.
04Insert the new toner cartridge.
1. Open the package of the toner cartridge, and remove
the toner cartridge.
1. Match the new toner cartridge with the slot on the
main unit as shown in the illustration.
2. Push the new toner cartridge in as far as possible.
2. Hold the new toner cartridge in both hands as
shown in the illustration, and shake it vertically
approximately 10 times.
9~10
NOTE
Support the new toner cartridge with your hand from
underneath while pushing it into the machine with
your other hand.
05Close the front cover of the main unit.
CAUTION
When closing the cover, be careful not to get your
fingers caught, as this may result in personal injury.
IMPORTANT
Do not shake the toner cartridge in the direction
shown in the illustration. Doing so may cause the
toner to not output properly.
48
Replacement Parts
If the Following Screen Is Displayed after
Replacing the Toner Cartridge
After replacing the toner cartridge, the following screen
may appear.
Replacing the Waste Toner Container
When the waste toner container nears capacity, a
message appears on the touch panel display. In this case,
you should prepare a new waste toner container.
Even if you do not replace the waste toner container
immediately, you can perform printing for a while. The
number of prints you can make depends on the content
you print.
When the waste toner container is full, a screen
with instructions on how to replace the waste toner
container appears on the touch panel display. Follow the
procedure described below to replace the waste toner
container.
WARNING
)) Do
not burn or throw used waste toner containers
into open flames. Also, do not store waste toner
containers in places exposed to open flames, as this
may cause the toner to ignite, resulting in burns or
a fire.
)) If you accidentally spill or scatter toner, carefully
wipe up the loose toner with a damp, soft cloth and
avoid inhaling any toner dust. Do not use a vacuum
cleaner that is not equipped with safety measures
to prevent dust explosions to clean up loose toner.
Doing so may cause damage to the vacuum cleaner
or result in a dust explosion due to static discharge.
The status of each of the toner cartridges attached to
the machine is displayed in the enclosed area of the
screen, shown above.
Message
Status
Wrong cartridge color may
be inserted.
A toner cartridge of the
wrong color is inserted.
Wrong item no. cart. may
be inserted.
A toner cartridge with the
wrong model number is
inserted.
Toner cart. may be
malfunctioning.
The inserted toner cartridge
may have been damaged.
----
The correct toner cartridge
is inserted.
To continue using the toner cartridge, press [I Agree]. If
you select this option, the operation of the machine is
not guaranteed.
To replace the toner cartridge, press [Cancel].
If you are not sure about the remedies, contact your local
authorized Canon dealer from which you purchased the
toner cartridge.
CAUTION
)) If
toner is ingested, consult a physician immediately.
toner gets onto your hands or clothing, wash
it off immediately with cold water. Washing it off
with warm water will set the toner, and make it
impossible to remove the toner stains.
)) If
IMPORTANT
)) Your
local authorized Canon dealer will dispose of
used waste toner containers.
)) Used toner cannot be reused. Do not mix new and
used toner together.
)) Use only waste toner containers intended for use
with this machine.
)) Do not replace the waste toner container before the
message prompting you to replace it appears on
the touch panel display.
NOTE
)) Complete
instructions on how to replace the
waste toner container can be accessed by pressing
[Previous] or [Next] on the touch panel display.
)) If the waste toner container must be replaced
during a print job, the remaining prints are made
after the new waste toner container is installed.
Replacement Parts
49
01Remove the waste toner container.
1. Open the front cover of the main unit.
2. Pull out the waste toner container.
1
NOTE
the bag in the box for the new waste toner
container.
)) Place the removed waste toner container on a level
surface. If the waste toner container is tilted too far,
toner may spill out.
)) Use
2
CAUTION
When removing the waste toner container, do not tilt
it. If you tilt the waste toner container, toner will spill
out.
02Prepare a new waste toner container,
and store the removed waste toner
container.
03
Insert the new waste toner container
into the main unit.
1. Align the mark on the waste toner container and
the mark on the slot of the main unit, and insert the
waste toner container.
2. Close the front cover of the main unit.
1. Take the new waste toner container out of the box.
2
1
2. Insert the removed waste toner container into a bag,
close and tie the bag so that the toner does not spill
out, and then put the bag in a box.
CAUTION
When closing the front cover of the main unit, be
careful not to get your fingers caught, as this may
result in personal injury.
50
Replacement Parts
Replacing the Drum Unit
)) When
you finish replacing the drum unit, press
[Close].
When the drum unit approaches the end of its service
life and needs to be replaced, a message appears on the
touch panel display. Follow the procedure described
below to replace the drum unit.
IMPORTANT
)) For
high-quality printouts, when replacing the drum
unit we recommend using a Canon drum unit.
)) Store drum units in a location away from light
sources such as direct sunlight.
)) Storing the drum unit in a room that is cold but
rapidly heated, or has other rapid temperature
changes, causes water droplets (condensation) to
form inside it.
)) Do not remove the orange protective cover until
you insert the drum unit into the machine.
NOTE
)) Complete instructions on how to replace the drum
unit can be accessed by pressing [Previous] or
[Next] on the touch panel display.
)) Depending on your contract, a message prompting
you to replace the drum unit may appear on the
bottom of the touch panel display.
01Remove the waste toner container.
1. Open the front cover of the main unit.
2. Pull out the waste toner container.
1
2
IMPORTANT
Place the removed waste toner container on a level
surface. If the waste toner container is tilted too far,
toner may spill out.
▼
Replacement Parts
51
02Pull out the drum unit to replace.
03Prepare to insert the new drum unit.
1. Grip the handle of the drum unit to replace, and pull
it out.
1. Remove the new drum unit from its box.
2. Hold the drum unit horizontally in both hands as
shown in the illustration, and tilt it to the left and
right approximately 12 times.
10~12
2. Pull the drum unit out of the main unit about halfway,
and then pull it out all the way while supporting the
indented area with your other hand.
IMPORTANT
Do not tilt the removed drum unit too far. Doing so
may cause toner to spill out.
52
Replacement Parts
IMPORTANT
Do not remove the orange protective cover until you
insert the drum unit into the machine.
04Insert the new drum unit.
1. Grip the handle and indented area of the drum unit,
and insert the drum unit while aligning the mark on
the drum unit with the mark on the slot of the main
unit.
05Insert the waste toner container into
the main unit.
1. Align the mark on the waste toner container and
the mark on the slot of the main unit, and insert the
waste toner container.
2. Close the front cover of the main unit.
2
1
2. Remove the protective cover after the drum unit is
completely inserted.
CAUTION
When closing the front cover of the main unit, be
careful not to get your fingers caught, as this may
result in personal injury.
IMPORTANT
When you insert the drum unit into the main unit,
the orange protective cover remains. Remove the
protective cover after the drum unit is completely
inserted.
Replacement Parts
53
Consumables
The following consumables are available from Canon. For more information, contact your local authorized
Canon dealer. We recommend that you order paper stock and toner from your local authorized Canon dealer
before your stock runs out.
Recommended Paper
In addition to plain paper (LTR, LGL, STMT, and EXEC
sizes), recycled paper, color paper, transparencies, labels,
and other types of paper stock are available.
For information on the dedicated toner cartridge model
numbers for this machine, see "Replacement Parts," on
p.44.
CAUTION
Do not store paper in places exposed to open flames,
as this may cause the paper to ignite, resulting in
burns or a fire.
IMPORTANT
)) Some
commercially available paper types are
not suited for this machine. Contact your local
authorized Canon dealer when you need to
purchase paper.
)) To prevent moisture build-up, tightly wrap any
remaining paper in its original package for storage.
NOTE
For high-quality printouts, use paper recommended
by Canon.
Toner
Confirm that the code on the
front cover of the machine and
the one on the package of the
genuine toner are the same.
If a message prompting you to replace the toner
cartridge appears on the touch panel display, replace the
used toner cartridge of the displayed color with a new
one.
Toner comes in four colors: black, cyan, magenta, and
yellow.
Check the toner color that you need to replace before
ordering toner from your local authorized Canon dealer.
Also, when replacing the toner cartridge, make sure that
you replace toner of the correct color.
Use only toner cartridges intended for use with this
machine.
For optimum print quality, using Canon genuine toner is
recommended.
54
Consumables
WARNING
)) Do
not burn or throw used toner cartridges into
open flames, as this may cause the toner remaining
inside the cartridges to ignite, resulting in burns or
a fire.
)) Do not store toner cartridges in places exposed to
open flames, as this may cause the toner to ignite,
resulting in burns or a fire.
)) If you accidentally spill or scatter toner, carefully
wipe up the loose toner with a damp, soft cloth and
avoid inhaling any toner dust. Do not use a vacuum
cleaner that is not equipped with safety measures
to prevent dust explosions to clean up loose toner.
Doing so may cause damage to the vacuum cleaner
or result in a dust explosion due to static discharge.
CAUTION
)) Keep
)) If
toner out of the reach of small children.
toner is ingested, consult a physician immediately.
IMPORTANT
)) Store
toner cartridges in a cool location, away
from direct sunlight. (The recommended storage
conditions are temperatures below 86°F and
humidity below 80%.)
)) Do not store toner cartridges in an upright position.
)) [Be careful of counterfeit toners]
Please be aware that there are counterfeit Canon
toners in the marketplace. Use of counterfeit
toner may result in poor print quality or machine
performance. Canon is not responsible for any
malfunction, accident or damage caused by the use
of counterfeit toner.
For more information, see http://www.canon.com/
counterfeit.
Staple Cartridge
For information on the staple cartridge model numbers
for this machine, see "Replacement Parts," on p.44.
Drum Unit
Genuine Supplies
When you replace the drum unit with a new one, be
sure to use only drum units intended for use with the
machine.
Canon has developed and manufactured Toner, Parts,
and Supplies specifically for use in this machine.
For optimum print quality, using Canon genuine drum
unit is recommended.
For optimal print quality and for optimal machine
performance and productivity, we recommend that you
use Genuine Canon Toner, Parts, and Supplies.
For information on the drum unit model numbers for
this machine, see "Replacement Parts," on p.44.
Contact your Canon Authorized Dealer or Service
Provider for Genuine Canon Supplies.
CAUTION
For cardiac pacemaker users:
This drum unit emits low level magnetic flux. If you
use a cardiac pacemaker and feel abnormalities,
please move away from the drum unit, and consult a
physician.
Consumables
55
56
Consumables
5
Troubleshooting
Routine Cleaning.......................................................................................................................................................................................................... 58
Originals Cannot Be Scanned Properly (Cleaning the Platen Glass)....................................................................................................... 59
Scanned Originals Become Dirty (Manual Feeder Cleaning)..................................................................................................................... 59
When White Streaks Appear on Prints (Cleaning the Dust Proof Glass). ............................................................................................... 60
When an Error Message/Error Code Is Displayed.................................................................................................................................. 62
When an Error Message Is Displayed............................................................................................................................................................. 62
When an Error Code Is Displayed..................................................................................................................................................................... 62
Service Call Message. ................................................................................................................................................................................................ 63
Contacting Your Local Authorized Canon Dealer.................................................................................................................................. 64
Setting the Limited Functions Mode from the Service Call Message Screen...................................................................... 64
Functions Available When the Printer/Scanner Cannot Be Used Due to an Error. ........................................................... 65
Locations of Staple/Paper Jams......................................................................................................................................................................... 66
Routine Cleaning
If an original is not copied clearly, clean the platen glass, the underside of the feeder, the document feed
scanning area, and the rollers of the feeder. For high-quality printouts, we recommend cleaning these parts
once or twice a month.
The proper cleaning method for various cases is shown by the marks below.
Case
Type of Substance
Cleaning Method
Case 1
Adhesive and other easy to
remove substances
Clean the machine with the glass cleaning sheet included with the
machine.
Case 2
Ink and other difficult to
remove substances
Clean the machine with a cloth which is wrung after being
dampened in water, and then wipe it clean with a soft, dry cloth.
Case 3
Stains that cannot be
removed with a wet cloth
Clean the machine with a cloth dampened with a mild detergent
mixed with water, and then wipe it clean with a soft, dry cloth.
WARNING
)) When
cleaning the machine, first turn Off the main power switch, and disconnect the power cord. Failure to observe
these steps may result in a fire or electrical shock.
)) Disconnect the power cord from the power outlet regularly, and clean the area around the base of the power plug's
metal pins and the power outlet with a dry cloth to ensure that all dust and grime is removed. If the power cord is
connected for a long period of time in a damp, dusty, or smoky location, dust can build up around the power plug
and become damp. This may cause a short circuit and result in a fire.
IMPORTANT
)) When
cleaning with a cloth, do not dampen the cloth too much, as this may damage the original or break the
machine.
)) Do not use alcohol, benzene, paint thinner, or other solvents for cleaning. Doing so may result in damage to the
plastic parts.
58
Routine Cleaning
Originals Cannot Be Scanned Properly
Scanned Originals Become Dirty
(Cleaning the Platen Glass)
(Manual Feeder Cleaning)
If the platen glass or the underside of the feeder is dirty,
the original may not be scanned clearly. Clean the platen
glass and the underside of the feeder by following the
procedure below.
If originals that have been fed through the feeder have
streaks or appear dirty, clean the feed rollers.
IMPORTANT
Spin the rollers while cleaning them.
01Clean the rollers of the feeder.
2
1. Open the feeder cover.
2. Clean the rollers (a total of two places) inside the
feeder cover.
1
1. Clean the platen glass.
2
1
2. Clean the underside of the feeder.
NOTE
stains will not come out, use detergent instead of
water.
)) When the glass cleaning sheet is dirty, rinse it with
water and spread it out to let it dry.
)) If
02
Clean the inside of the inner cover of
the feeder.
1. Open the inner cover of the feeder.
2. Clean the transparent plastic (a total of two places).
1
2
3. Close the inner cover of the feeder.
CAUTION
When closing the inner cover of the feeder, be careful
not to get your fingers caught, as this may result in
personal injury.
Routine Cleaning
59
03Clean the document feed scanning
When White Streaks Appear on Prints
area (thin glass strip) and the white plate.
(Cleaning the Dust Proof Glass)
1. Open the feeder.
When white streaks or other print defects occur, the dust
proof glass may be dirty. Follow the procedure below to
clean the dust proof glass.
2. Clean the document feed scanning area.
01Open the front cover of the main unit.
3. Clean the white plate.
3
1
02
2
Remove the dust proof glass cleaner
from the rear side of the front cover of the
main unit.
4. Close the feeder.
CAUTION
When closing the feeder, be careful not to get your
fingers caught, as this may result in personal injury.
NOTE
When the glass cleaning sheet is dirty, rinse it with
water and spread it out to let it dry.
04Close the feeder cover.
CAUTION
When closing the feeder cover, be careful not to get
your fingers caught, as this may result in personal
injury.
60
Routine Cleaning
03Hold the dust proof glass cleaner so
that the pad on the tip is facing down, insert
it in the locations shown on the illustration
until it stops, and then move it gently back
and forth.
Clean the four locations as shown below. There are
marks on the main unit that indicate the cleaning
locations. Check these marks when cleaning the dust
proof glass.
04
When you have finished cleaning the
dust proof glass, gently push the dust proof
glass cleaner back onto the rear side of the
front cover of the main unit.
Place the dust proof glass cleaner back on the rear
side of the front cover of the main unit with its tip
facing the left direction.
05Close the front cover of the main unit.
CAUTION
When closing the front cover of the main unit, be
careful not to get your fingers caught, as this may
result in personal injury.
Routine Cleaning
61
When an Error Message/Error Code Is Displayed
When an Error Message Is Displayed
When an Error Code Is Displayed
Error messages may appear on the touch panel display
of the machine or the Web browser. Self-diagnostic error
messages appear in the following cases:
If a job or operation does not complete successfully, the
error code is displayed on the Details screen for Log on
the Status Monitor/Cancel screen. You can check the
error code in the following locations:
)) When
scanning or printing cannot be performed
because of an operational error
)) When you need to make a decision or take some
action during scanning or printing
)) When you need to make a decision or take some
action while browsing the network
Details screen for Log on the Status Monitor/
Cancel screen:
For information on error messages and instructions on
resolving errors, see e-Manual > Problem Solving.
Results row of the Device Information
Communication Log
04/08/2014
iRADV C350iF
DEVICE INFORMATION COMMUNICATION LOG REPORT
Example of an Error Message on the Touch Panel
Display
START TIME
END TIME
TYPE
DELIVER
DELIVER
DELIVER
DELIVER
TO/FROM
DATA DETAILS
RESULT
DEPT.ID
ADDRESS BOOK
DEPT.ID
ADDRESS BOOK
DEPT.ID
ADDRESS BOOK
DEPT.ID
ADDRESS BOOK
If an error occurs during a send, receive, or fax job, the
error code is printed. For information on error codes and
instructions on resolving errors, see e-Manual > Problem
Solving.
Example of an Error Message on the Web Browser
62
When an Error Message/Error Code Is Displayed
Service Call Message
If a malfunction occurs and the machine cannot operate
normally, a screen prompting you to contact your local
authorized Canon dealer is displayed. If a screen such as
the one below is displayed, contact your local authorized
Canon dealer. (See "Contacting Your Local Authorized
Canon Dealer" on p. 64.)
When the Print or Scan function does not
operate normally:
The selected function cannot be used. Press [Main
Menu] to return to the Main Menu
When [Limited Func. Mode] is displayed:
If [Limited Func. Mode] is displayed, you can temporally
set the Limited Functions Mode to continue to use the
machine until the cause of the malfunction is cleared.
(See "Setting the Limited Functions Mode from the
Service Call Message Screen," on p.64.)
If a screen such as the one above is displayed and the
print or scan function does not operate normally, some
functions may still be available.
When a service call message is displayed on the
bottom of the screen:
Even if a message prompting you to call your service
representative appears on the bottom of the screen,
some functions may still be available.
For more information on the available functions, see
"Functions Available When the Printer/Scanner Cannot
Be Used Due to an Error," on p.65.
Service Call Message
63
Contacting Your Local Authorized
Canon Dealer
Setting the Limited Functions Mode
from the Service Call Message Screen
If a screen prompting you to contact your local
authorized Canon dealer is displayed, follow the
procedure described below.
When [Limited Func. Mode] is displayed, follow the
procedures below.
01Turn the main power OFF and then ON.
IMPORTANT
For precautions to take when restarting the machine,
see "Main Power and Energy Saver Key," on p.34.
02
If the operation still cannot be
performed correctly, turn the main power
switch OFF, remove the power plug from the
outlet, and contact your local authorized
Canon dealer.
WARNING
Mishandling the power plug is dangerous. For
instructions on handling the power plug, see
"Important Safety Instructions," on p.84.
NOTE
When you contact your local authorized Canon dealer,
have the following information available:
-- Product name
-- Details of the malfunction
-- The error code displayed on the touch panel display
64
Service Call Message
IMPORTANT
If you turn OFF the main power switch when there is a
job waiting to print, that job is erased.
NOTE
If you set Limited Functions Mode to 'On' from the
Service Call Message screen, [Limited Functions Mode]
in [Management Settings] (Settings/Registration) is
also set to 'On'. (See e-Manual > Security.)
01Press [Limited Func. Mode] → [Yes].
A message prompting you to restart the machine
(turning the main power switch OFF, and then ON)
appears.
02Turn the main power OFF and then ON.
IMPORTANT
For precautions to take when restarting the machine,
see "Main Power and Energy Saver Key," on p.34.
Functions Available When the Printer/
Scanner Cannot Be Used Due to an Error
Even when an error occurs and the Print and Scan
functions are restricted, there are functions that can be
used. The functions that can be operated are marked
with a check mark, and those that cannot be operated
are marked with a dash below.
Copy
When the
Print function
is restricted
When
the Scan
function is
restricted
-
-
Fax
*1
When the
Print function
is restricted
-
Scan and Store
-
Access Stored Files
-
Fax/I-Fax Inbox
-
Secure Print
-
Scanner
*2
*1 The registered button may not be available depending on the
restricted functions.
*2 [Print List] on the Job Log screen and [Register] on the Consumable
screen are not available.
Control Panel
Available
Functions
*2
Settings/
Registration
When the
Print function
is restricted
When
the Scan
function is
restricted
-
-
Operation From a Computer
-
Web Access
-
When
the Scan
function is
restricted
Quick Menu*1
-
Scan and Send
Shortcut to
Settings/
Registration
Available
Functions
The Status Monitor/
Cancel Screen
Main Menu Screen
Available
Functions
Touch Panel Display Left Side
-
Available
Functions
When the
Print function
is restricted
When
the Scan
function is
restricted
Remote UI*1
MEAP Application*2
Tutorial
Workflow Composer
-
-
Document Scan
Code Analyzer*3
Other MEAP
Applications*4
*1 Sending a fax from a computer is not available.
*2 [Add Files (Scan and Store)] on the Edit File screen is not available.
*3 Document Scan Code Analyzer is included in the Document Scan
Lock Kit. (See e-Manual > Optional Products/Software.)
*4 Available by installing each MEAP application. May not be available
depending on the restricted functions.
*1 Some of the menus may not be available depending on the
restricted functions.
*2 Available by installing each MEAP application. May not be available
depending on the restricted functions.
IMPORTANT
)) A
print job is automatically canceled when the Print
function is restricted. A scan job is automatically
canceled when the Scan function is restricted.
)) The machine may not enter the Sleep mode
completely when a function is restricted due to an
error.
NOTE
If the target function is restricted due to an error, the
function is not available when you use the shortcut
key on the left side of the touch panel display or when
you use the Quick Menu.
Service Call Message
65
Locations of Staple/Paper Jams
Paper and staple jams may occur in the following parts of the machine. By following the instructions in the
applicable section, you can clear staple/paper jams. For details on these procedures, see the e-Manual.
Paper Jams: e-Manual > Problem Solving > Locations of Paper Jams
Staple Jams: e-Manual > Problem Solving > Clearing Staple Jams (Staple Finisher-S1)
Feeder
Main Unit
Paper Drawer
Cassette Feeding Unit-AG1/AH1 (Optional)
2
1
Staple Finisher-S1 (Optional)
66
Locations of Staple/Paper Jams
6
Appendix
Specifications............................................................................. 68
Main Unit................................................................................... 68
Feeder. ........................................................................................ 71
Cassette Feeding Unit-AG1............................................ 71
Cassette Feeding Unit-AH1............................................ 72
Staple Finisher-S1................................................................. 72
Copy Card Reader-F1......................................................... 73
FAX Function........................................................................... 73
Send Function (Scan Features)........................................... 74
Send Function (E-Mail and I-Fax Features)....................... 75
Network Environment (Hardware Specifications)....... 76
Network Environment (Software Specifications)........ 76
Printer Settings (Software Specifications)........................ 76
Legal Notices.............................................................................. 77
Product Name........................................................................ 77
FCC (Federal Communications Commission) Users in the
U.S.A......................................................................................... 77
Laser Safety.............................................................................. 78
International ENERGY STAR Program....................... 78
IPv6 Ready Logo................................................................... 78
Information Security Standard (IEEE 2600). .............. 78
Copyright.................................................................................. 79
Disclaimers............................................................................... 79
Legal Limitations on the Usage of Your Product
and the Use of Images................................................. 79
Users in the U.S.A.................................................................. 80
Users in Canada..................................................................... 81
Utilisation au Canada......................................................... 82
Super G3.................................................................................... 83
Important Safety Instructions........................................ 84
Installation................................................................................ 84
Power Supply.......................................................................... 84
Handling.................................................................................... 85
Maintenance and Inspections..................................... 86
Consumables.......................................................................... 87
Telephone Equipment...................................................... 88
Other Warnings..................................................................... 88
CANON imageRUNNER ADVANCE C350iF/C250iF
SERIES LIMITED WARRANTY...................................... 89
TERMS OF imageWARE REMOTE SERVICE............. 90
TERMS OF Content Delivery System........................ 91
Specifications
Specifications are subject to change without notice for product improvement or future release.
Main Unit
Item
Specifications
Name
Canon imageRUNNER ADVANCE C350iF/C250iF
Type
Reader-printer separated, Desktop
Color Supported
Full Color
Resolution for Reading
600 x 600 dpi
Resolution for Writing
600 x 600 dpi
Number of Tones
256
Available Paper
Paper Drawer:
Weight:
16 lb bond to 60 lb cover (60 to 163 g/m2)
Type:
Thin (16 lb bond (60 to 63 g/m2)), Plain 1 (17 to 20 lb bond (64 to 75 g/m2)), Plain 2 (21 to 24
lb bond (76 to 90 g/m2)), Plain 3 (25 to 28 lb bond (91 to 105 g/m2)), Recycled, Color, PrePunched, Bond, Heavy 1 (29 to 34 lb bond (106 to 128 g/m2)), Heavy 2 (35 lb bond to 60 lb
cover (129 to 163 g/m2)), and Envelopes*
Multi-Purpose Tray:
Weight:
16 lb bond to 80 lb cover (60 to 220 g/m2)
Type:
Thin (16 lb bond (60 to 63 g/m2)), Plain 1 (17 to 20 lb bond (64 to 75 g/m2)), Plain 2 (21 to 24
lb bond (76 to 90 g/m2)), Plain 3 (25 to 28 lb bond (91 to 105 g/m2)), Recycled, Color, PrePunched, Bond, Heavy 1 (29 to 34 lb bond (106 to 128 g/m2)), Heavy 2 (35 lb bond to 60 lb
cover (129 to 163 g/m2)), Heavy 3 (61 to 80 lb cover (164 to 220 g/m2)), Labels, Transparency,
and Envelopes
*Envelopes can only be loaded in Paper Drawer 1.
Acceptable Originals
Sheet, book, and three dimensional objects (up to 4.4 lb (2 kg))
Paper Sizes
Paper Drawer:
LGL, LTR, STMT, EXEC, and Custom size (3 7/8" x 7 1/2" to 8 1/2" x 14" (98.4 x 190.5 mm to 216 x
355.6 mm)
Multi-Purpose Tray:
LGL, LTR, STMT, EXEC, and Custom size (3 7/8" x 5 7/8" to 8 1/2" x 14" (98.4 x 148 mm to 216 x
355.6 mm)
68
Specifications
Item
Warm-Up Time*
Specifications
After Powering ON (when [Quick Startup Settings for Main Power] is set to 'Off'): 34 seconds or less
After Powering ON (when [Quick Startup Settings for Main Power] is set to 'On'): 10 seconds or less
The time until key operations can be performed on the touch panel display is 7 seconds or less.
Even if [Quick Startup Settings for Main Power] is set to 'On', the machine does not startup quickly,
depending on the situations.
Returning from the Sleep mode: 10 seconds or less
*Activation time may vary, depending on the environment and conditions under which the machine is being
used. (At a room temperature of 68 °F in all above cases.)
First Copy Time
imageRUNNER ADVANCE C350iF
Full Color: 7.4 seconds
Black-and-White: 5.9 seconds
imageRUNNER ADVANCE C250iF
Full Color: 10.5 seconds
Black-and-White: 8.4 seconds
Copy Speed*
Direct
imageRUNNER ADVANCE C350iF
LGL 29 sheets/minute
36 sheets/minute
LTR
STMT 26 sheets/minute
EXEC 36 sheets/minute
imageRUNNER ADVANCE C250iF
LGL 21 sheets/minute
26 sheets/minute
LTR
STMT 26 sheets/minute
EXEC 26 sheets/minute
*Except when paper is fed from the multi-purpose tray.
The copy speed may vary, depending on the settings for paper type, paper size, and the sending method.
When continuously copying, adjustments for machine temperature or image quality may cause machine
operations to pause or become slow.
Margin
Top:
1/8" (4.0 mm)
Left and Right:1/8" (4.2 mm)
Bottom:
1/8" (2.5 mm)
Magnification
Regular paper size:
Same Ratio
Direct
Reduction
1:0.78 (LGL → LTR), 1:0.64 (LTR → STMT), 1:0.50, and 1:0.25
Enlargement
1:1.29 (STMT → LTR), 1:2.00, and 1:4.00
Copy Ratio: 25 to 400% (in 1% increment)
Specifications
69
Item
Paper Feeding System/Capacity
Specifications
Paper Drawer:
550 sheets (21 lb bond (80 g/m2)) or 640 sheets (17 lb bond (64 g/m2))
Multi-Purpose Tray:
100 sheets (21 lb bond (80 g/m2))
Multiple Copies
999 sheets
Memory Capacity
2 GB
Hard Disk Capacity*
160 GB (Used space: 80 GB)
*The hard disk capacity is subject to change in future release.
Power Source
120 V AC, 60 Hz, 6.9 A
Power Consumption
Maximum Power Consumption: 1.5 kW or less
When the machine is in the Sleep mode*: 1 W
When the main power switch is turned OFF:
When [Quick Startup Settings for Main Power] is set to 'On': 0.5 W
When [Quick Startup Settings for Main Power] is set to 'Off': 0.1 W
*Depending on the system and conditions of use, these values may differ.
Dimensions (H x W x D)
24" x 20 1/8" x 24 1/2" (610 mm x 511 mm x 621 mm)
Weight
Approximately 99.2 lb (45 kg)
Installation Space (W x D)
33 1/2" x 24 1/2" (852 mm x 621 mm) (when the multi-purpose tray is extended)
70
Specifications
Feeder
Item
Specifications
Original Feeding Mechanism
Automatic Document Feeder
Size and Weight of Originals
Size:
LGL, LTR, and STMT
Weight:
1-Sided Scanning*: 13 to 28 lb bond (50 to 105 g/m2)
2-Sided Scanning : 17 to 28 lb bond (64 to 105 g/m2)
*When scanning only one sheet of paper, originals from 13 to 34 lb bond (50 to 128 g/m2) are supported.
Original Tray Capacity
50 sheets* (21 lb bond (80 g/m2))
*30 sheets for LGL documents
Original Scanning Speed
imageRUNNER ADVANCE C350iF:
Copying:
1-sided scanning:
36 sheets/minute (LTR in Black-and-White/Full Color at 300 x 600 dpi)
Scanning:
1-sided scanning:
36 sheets/minute (LTR in Black-and-White/Full Color at 300 x 300 dpi)
imageRUNNER ADVANCE C250iF:
Copying:
1-sided scanning:
26 sheets/minute (LTR in Black-and-White/Full Color at 300 x 600 dpi)
Scanning:
1-sided scanning:
26 sheets/minute (LTR in Black-and-White/Full Color at 300 x 300 dpi)
Cassette Feeding Unit-AG1
Item
Specifications
Paper Sizes
LGL, LTR, STMT, EXEC, and Custom size (3 7/8" x 7 1/2" to 8 1/2" x 14" (98.4 x 190.5 mm to 216 x
355.6 mm)
Paper Drawers Capacity
550 sheets (21 lb bond (80 g/m2)) or 640 sheets (17 lb bond (64 g/m2))
Power Source/Maximum Power
Consumption
From the main unit/Approximately 25 W
Dimensions (H x W x D)
16 3/4" x 20 1/8" x 20" (425 mm x 511 mm x 508 mm)
Weight
Approximately 33.1lb (15 kg)
Specifications
71
Cassette Feeding Unit-AH1
Item
Specifications
Paper Sizes
LGL, LTR, STMT, EXEC, and Custom size (3 7/8" x 7 1/2" to 8 1/2" x 14" (98.4 x 190.5 mm to 216 x
355.6 mm)
Paper Drawers Capacity
550 sheets (21 lb bond (80 g/m2)) or 640 sheets (17 lb bond (64 g/m2))
Power Source/Maximum Power
Consumption
From the main unit/Approximately 35 W
Dimensions (H x W x D)
16 3/4" x 20 1/8" x 20" (425 mm x 511 mm x 508 mm)
Weight
Approximately 41.9 lb (19 kg)
Staple Finisher-S1
Item
Paper Size/Weight/Type
Specifications
Size:
LGL, LTR, STMT, EXEC, Custom size (3 7/8" x 5 7/8" to 8 1/2" x 14" (98.4 x 148 mm to 216 x 355.6 mm),
and Envelopes
Weight:
16 lb bond to 80 lb cover (60 to 220 g/m2)
Type:
Thin (16 lb bond (60 to 63 g/m2)), Plain 1 (17 to 20 lb bond (64 to 75 g/m2)), Plain 2 (21 to 24 lb
bond (76 to 90 g/m2)), Plain 3 (25 to 28 lb bond (91 to 105 g/m2)), Recycled, Color, Pre-Punched,
Bond, Heavy 1 (29 to 34 lb bond (106 to 128 g/m2)), Heavy 2 (35 lb bond to 60 lb cover (129 to
163 g/m2)), Heavy 3 (61 to 80 lb cover (164 to 220 g/m2)), Labels, Transparency, and Envelopes
Capacity Per Tray
No finishing set, Collate, and Collate + Offset and Group + Offset mode:
500 sheets (or 2 7/8 (73.5" mm) in height)
Staple mode:
500 sheets/20 sets (or 2 7/8" (73.5 mm) in height)
Max. Stapling capacity/
Available Staple Size
30 sheets
Power Source/Maximum Power
Consumption
From the main unit/Approximately 37 W
Dimensions (H x W x D)
11 7/8" x 23 1/4" x 18 1/8" (301 mm x 589 mm x 459 mm)
Weight
Approximately 30.9 lb (14 kg)
Installation Space Including the
Main Unit (W x D)
42" x 22 5/8" (1,066 mm x 573 mm) (when the multi-purpose tray is extended)
72
Specifications
Copy Card Reader-F1
Item
Specifications
Available Cards
Magnetic
Card Readout Method
Magnetic readout
Magnetic Card Reading
Direction
Face up
Store/Replay
Replay
Power Source
From the main unit
Dimensions (H x W x D)
1 5/8" x 3 1/2" x 3 3/4" (40 mm x 88 mm x 96 mm)
(excluding the attachment kit and cable)
Weight
Approximately 7.1 oz (200 g)
(including the attachment kit and cable)
FAX Function
Item
Specifications
Telephone Line Used*1
Public Switched Telephone Network
Scan Line Density
(Scan Transmission)
8 pels*2/mm x 3.85 line/mm
Normal:
8 pels*2/mm x 7.7 line/mm
Fine:
Super-Fine: 8 pels*2/mm x 15.4 line/mm
Ultra-Fine: 16 pels*2/mm x 15.4 line/mm
Transmission Speed
Super G3: 33.6 kbps, G3: 14.4 kbps
Compression Method
MH, MR, MMR, JBIG
Transmission Type
Super G3, G3
Sending Original Sizes
LGL to STMT
Receiving Paper Sizes
11" x 17" to STMT
Transmission Times
JBIG: Approximately 2.6 seconds
Auto Dial Function
Address Book: 1,800 destinations
(including destinations stored in one-touch buttons)
Image Memory
Approximately 6,000 pages
*1 When using an IP telephone service, facsimile communication may not be performed normally via an IP telephone line. It is recommended to use
facsimile communication via a general telephone (Public Switched Telephone Network) line.
*2 Pels stands for picture elements (pixels).
Specifications
73
Send Function (Scan Features)
Item
Specifications
Communication Protocol
FTP (TCP/IP), SMB (TCP/IP), WebDAV
Data Format
TIFF, JPEG, PDF, XPS, OOXML (PowerPoint)
Resolution
Black-and-White:
100 x 100 dpi, 150 x 150 dpi, 200 x 100 dpi, 200 x 200 dpi, 200 x 400 dpi, 300 x 300 dpi,
400 x 400 dpi, 600 x 600 dpi
Color:
100 x 100 dpi, 150 x 150 dpi, 200 x 100 dpi, 200 x 200 dpi, 300 x 300 dpi
System Environment
Windows Server 2003 R2 SP2, Windows Vista SP2, Windows Server 2008 SP2, Windows Server 2008
R2 SP2, Windows 7, Windows 8, Windows 8.1, Windows Server 2012, Windows Server 2012 R2,
Solaris 10, Mac OS X 10.6.x/10.7.x/10.8.x/10.9.x, Red Hat Linux 9
Interface
1000BASE-T, 100BASE-TX, 10BASE-T
Color Mode
Automatic-Color Select (Full Color/Grayscale), Automatic-Color Select (Full Color/Black-andWhite), Full Color, Grayscale, Black-and-White
Original Type
Text, Text/Photo, Photo
Other
Preview, Browse Windows (SMB) File Server
Optional PDF/XPS/OOXML
Functions
PDF:
Compact, Trace and Smooth, Encryption, OCR, Device Signature, User Signature, Optimization
for Web*1, PDF/A-1b, Policy Applied
XPS:
Compact, OCR, Device Signature, User Signature
OOXML:
PowerPoint, OCR
*1 PDF files optimized for Web viewing.
74
Specifications
Send Function (E-Mail and I-Fax Features)
Item
Specifications
Communication Protocol
SMTP, POP3
I-Fax Communication Mode
Simple, Full
Resolution
For Sending E-mail (Black-and-White):
100 x 100 dpi, 150 x 150 dpi, 200 x 100 dpi, 200 x 200 dpi, 200 x 400 dpi, 300 x 300 dpi,
400 x 400 dpi, 600 x 600 dpi
For Sending E-mail (Color):
100 x 100 dpi, 150 x 150 dpi, 200 x 100 dpi, 200 x 200 dpi, 300 x 300 dpi
For Sending I-Fax:
200 x 100 dpi, 200 x 200 dpi, 200 x 400 dpi*1, 300 x 300 dpi*1, 400 x 400 dpi*1, 600 x 600 dpi*1
Format
E-mail:
TIFF, JPEG, PDF, XPS, OOXML(PowerPoint)
I-Fax (Black-and-White):
TIFF (MH, MR*1, MMR*1)
Original Size
E-mail:
LGL, LTR, STMT
I-Fax:
LGL*2, LTR, STMT*2
Server Software
Microsoft Exchange 2003 SP2, Microsoft Exchange 2007 SP2, Microsoft Exchange 2010, Microsoft
Exchange 2013, Sendmail 8.14.4, Lotus Domino R7.0
Other
Searches a destination via the LDAP Server, Preview
Optional PDF/XPS/OOXML
Functions (E-mail only)
PDF:
Compact, Trace and Smooth, Encryption, OCR, Device Signature, User Signature, Optimization
for Web*3, PDF/A-1b, Policy Applied
XPS:
Compact, OCR, Device Signature, User Signature
OOXML:
PowerPoint, OCR
*1 Available after setting RX conditions of the destination.
*2 Sent as LTR.
*3 PDF files optimized for Web viewing.
Specifications
75
Network Environment (Hardware Specifications)
Item
Network Interface
Specifications
10Base-T/100Base-TX/1000Base-T (RJ-45)
Network Environment (Software Specifications)
Item
Protocol Supported
Specifications
TCP/IP:
Frame type:
Ethernet II
Print applications:
LPD/Raw/IPP/IPPS/FTP/WSD/SMB/NetWare
IPX/SPX
Frame type:
Ethernet II/Ethernet 802.2/Ethernet 802.3/Ethernet SNAP/Auto Detect
Print applications:
Bindery PServer/NDS PServer/RPrinter/NPrinter
Printer Settings (Software Specifications)
Item
Resident Fonts
Specifications
PCL:
93 Scalable fonts, 2 OCR fonts, 10 Bitmap fonts, and AndaleFont* (Japanese, Korean, Simplified
Chinese, Traditional Chinese)
PS:
136 Scalable fonts
*The optional PCL International Font Set needs to be activated to use Andale® and WorldType® Collection, or
Andale Mono WT.
Printable Area
PCL5c, PCL6:
Reduced to 1/8" (4.2 mm) from the top, bottom, left, and right edges of the paper.
PostScript 3:
Reduced to 1/8" (4 mm) from the top, bottom, left, and right edges of the paper.
When printing in the Expand Print Region and Print mode, the upper margin becomes 1/8" (4
mm), the lower margin becomes 1/8" (2.5 mm), and the side margins both become 1/8" (4.2 mm).
The printable area is enlarged.
When an original has data that extends all the way to the edges, even if you select [Expand Print
Region and Print], the periphery of the data may be cut off when printing. In this case, specify the
reduction ratio in the printer driver so that data is not cut off, and perform printing again.
76
Specifications
Legal Notices
Product Name
Safety regulations require the product's name to be
registered. In some regions where this product is sold,
the following name(s) in parenthesis may be registered
instead.
)) imageRUNNER
ADVANCE C350iF/C250iF (F162600)
Use of shielded cables are required to comply with Class
B limits in Subpart B of Part 15 of the FCC Rules.
Do not make any changes or modifications to the
equipment unless otherwise specified in this manual. If
you make such changes or modifications, you could be
required to stop operation of the equipment.
Operation is subject to the following two conditions:
If your equipment malfunctions, please contact
your local authorized Canon dealer from whom you
purchased the equipment (if under warranty), or with
whom you have a servicing contact. If you are not sure
who to contact, and have both purchased and are
using the equipment in the U.S.A., please refer to the
"SUPPORT" page on Canon U.S.A.'s Web site (http://www.
usa.canon.com).
(1) This device may not cause harmful interference,
Canon U.S.A., Inc.
and
One Canon Park, Melville, NY 11747, U.S.A.
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
TEL No. 1-800-OK-CANON
FCC (Federal Communications Commission)
Users in the U.S.A
This device complies with Part 15 of the FCC Rules.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate, radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment OFF and ON, the user is
encouraged to try to correct the interference by one or
more of the following measures:
)) Reorient
)) Increase
or relocate the receiving antenna.
the separation between the equipment and
receiver.
)) Connect
the equipment to an outlet on a circuit
different from that to which the receiver is connected.
)) Consult the dealer or an experienced radio/TV
technician for help.
Legal Notices
77
Laser Safety
This product complies with 21 CFR Chapter 1
Subchapter J as a Class I laser product under the U.S.
Department of Health and Human Services (DHHS)
Radiation Performance Standard according to the
Radiation Control for Health and Safety Act of 1968. Also,
this product is certified as a Class 1 laser product under
IEC60825-1: 2007. This means that the product does not
produce hazardous laser radiation.
Since radiation emitted inside the product is completely
confined within protective housings and external covers,
the laser beam cannot escape from the machine during
any phase of user operation. Do not remove protective
housings or external covers, except as directed by the
equipment's manual.
The label shown below is attached to the inside of the
front cover.
International ENERGY STAR Program
As an ENERGY STAR® Partner,
Canon USA, Inc. has determined
that this machine meets the
international ENERGY STAR
Program for energy efficiency.
The International ENERGY STAR
Office Equipment Program
is an international program that promotes energy
saving through the use of computers and other office
equipment. The program backs the development and
dissemination of products with functions that effectively
reduce energy consumption. It is an open system in
which business proprietors can participate voluntarily.
The targeted products are office equipment, such as
computers, displays, printers, facsimiles, and copiers. The
standards and logos are uniform among participating
nations.
IPv6 Ready Logo
The protocol stack included
in this machine has obtained
the IPv6 Ready Logo Phase-2
established by the IPv6
Forum.
CAUTION
Use of controls, adjustments, or performance of
procedures other than those specified in the manuals
for this machine may result in hazardous radiation
exposure.
Information Security Standard (IEEE 2600)
This machine is compliant with IEEE Std 2600™ 2008 (hereinafter referred to as IEEE 2600), a global
information security standard for multifunction
peripherals and printers, and is able to achieve the
security requirements defined in IEEE 2600.*
For information on how this machine meets the security
requirements defined in IEEE 2600, see e-Manual >
Security > IEEE 2600 Security Standard.
*IEEE 2600.1 CC Authentication has not been obtained for this machine
by itself.
78
Legal Notices
Copyright
Copyright 2014 by Canon Inc. All rights reserved.
No part of this publication may be reproduced or
transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or
by any information storage or retrieval system without
the prior written permission of Canon Inc.
This product includes software and/or software modules
that are licensed by Canon Inc. or its licensors from third
parties. Use and distribution of this software and/or
software modules are subject to conditions (a) through
(c) below.
(a)
UFST: Copyright © 1989 - 1996, 1997, 2003, 2004, 2008,
all rights reserved, by Monotype Imaging Inc.
(b)
Copyright © Unpublished Work of Novell, Inc.
All Rights Reserved.
(c)
Portions of this software are copyright © 2007
The FreeType Project (www.freetype.org).
All rights reserved.
Disclaimers
The information in this document is subject to change
without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND
WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR
IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING
WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO
MARKETABILITY, MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR USE, OR NON-INFRINGEMENT.
CANON INC. SHALL NOT BE LIABLE FOR ANY DIRECT,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY
NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE
USE OF THIS MATERIAL.
Legal Limitations on the Usage of Your
Product and the Use of Images
Using your product to scan, print or otherwise
reproduce certain documents, and the use of such
images as scanned, printed or otherwise reproduced by
your product, may be prohibited by law and may result
in criminal and/or civil liability. A non-exhaustive list of
these documents is set forth below. This list is intended
to be a guide only. If you are uncertain about the
legality of using your product to scan, print or otherwise
reproduce any particular document, and/or of the use of
the images scanned, printed or otherwise reproduced,
you should consult in advance with your legal advisor for
guidance.
)) Paper
Money Checks
)) Money Orders
)) Food Stamps
)) Certificates of Deposit
)) Passports
)) Postage Stamps (canceled or uncanceled)
)) Immigration Papers
)) Identifying Badges or Insignias
)) Internal Revenue Stamps (canceled or uncanceled)
)) Selective Service or Draft Papers
)) Bonds or Other Certificates of Indebtedness
)) Checks or Drafts Issued by Governmental Agencies
)) Stock Certificates
)) Motor Vehicle Licenses and Certificates of Title
)) Copyrighted Works/Works of Art without Permission
of Copyright Owner
)) Travelers
The following applies in California, USA only:
The battery included with your product contains
Perchlorate Material and may require special handling.
See http://www.dtsc.ca.gov/hazardouswaste/
perchlorate/ for details.
Legal Notices
79
Users in the U.S.A.
Preinstallation Requirements for Canon Facsimile
Equipment
A. Location
Supply a suitable table, cabinet, or desk for the machine.
See "Specifications" in this guide for specific dimensions
and weight.
B. Order Information
1.A single telephone line (touch-tone or rotary) should
be used.
2.Order an RJ11-C telephone wall jack (USOC), which
should be installed by the telephone company. If the
RJ11-C wall jack is not present, telephone/facsimile
operation is not possible.
3.Order a normal business line from your telephone
company's business representative. The line should be
a regular voice grade line or an equivalent one. Use
one line per unit.
DDD (Direct Distance Dial) line
-orIDDD (International Direct Distance Dial) line if you
communicate overseas
NOTE
Canon recommends an individual line following
industry standards, i.e., 2500 (touch-tone) or 500
(rotary/pulse dial) telephones. A dedicated extension
off a PBX (Private Branch eXchange) unit without
"Call Waiting" can be used with your facsimile unit.
Key telephone systems are not recommended
because they send nonstandard signals to individual
telephones for ringing and special codes, which may
cause a facsimile error.
C. Power Requirements
The machine should be connected to a standard 120
volt AC, three-wire grounded outlet only.
Do not connect this machine to an outlet or power
line shared with other appliances that cause "electrical
noise." Air conditioners, electric typewriters, copiers, and
machines of this sort generate electrical noise that often
interferes with communications equipment and the
sending and receiving of documents.
80
Legal Notices
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules
and the requirements adopted by the ACTA. On the rear
panel of this equipment is a label that contains, among
other information, a product identifier in the format of
US:AAAEQ##TXXXX. If requested, this number must be
provided to the telephone company.
The REN (Ringer Equivalence Number) is used to
determine the number of devices that may be
connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in
response to an incoming call. In most, but not all areas,
the sum of the RENs should not exceed five (5.0). To be
certain of the number of devices that may be connected
to a line, as determined by the total RENs, contact the
local telephone company. The REN for this product
is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the
REN without a decimal point (e.g., 10 is a REN of 1.0).
An FCC compliant telephone line cable and modular
plug is provided with this equipment. This equipment is
designed to be connected to the telephone network or
premise wiring using a compatible modular jack that is
Part 68 compliant.
This equipment may not be used on coin service
provided by the telephone company. Connection to
party lines is subject to state tariffs.
In Case of Equipment Malfunction
Should any malfunction occur which cannot be
corrected by the procedures described in the e-Manual,
disconnect the equipment from the telephone line
cable and disconnect the power cord. The telephone
line cable should not be reconnected or the main power
switch turned ON until the problem is completely
resolved. Users should contact their local authorized
Canon Facsimile Service Dealer for the servicing of
equipment.
If your equipment malfunctions, please contact
your local authorized Canon dealer from whom you
purchased the equipment (if under warranty), or with
whom you have a servicing contract. If you are not
sure who to contact, and have both purchased and are
using the equipment in the U.S.A., please refer to the
"SUPPORT" page on Canon U.S.A.'s Web site (http://www.
usa.canon.com).
Rights of the Telephone Company
If this equipment imageRUNNER ADVANCE C350iF/
C250iF causes harm to the telephone network, the
telephone company may temporarily disconnect service.
The telephone company also retains the right to make
changes in facilities and services that may affect the
operation of this equipment. When such changes are
necessary, the telephone company is required to give
adequate prior notice to the user. However, if advance
notice is not possible, the telephone company will notify
the customer as soon as possible. Also, the customer will
be advised of his/her right to file a complaint with the
FCC if he/she believes it is necessary.
WARNING
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a computer
or other electronic device to send any message via
a telephone facsimile machine unless such message
clearly contains in a margin at the top or bottom of
each transmitted page, or on the first page of the
transmission, the date and time it is sent and an
identification of the business or other entity, or other
individual sending the message and the telephone
number of the sending machine or such business,
other entity, or individual. (The telephone number
provided may not be a 900 number or any other
number for which charges exceed local or longdistance transmission charges.)
NOTE
To program this information into your machine,
complete the procedure for registering your name,
unit's telephone number, time, and date as described
in Basic Operations or Settings/Registration in the
e-Manual.
Users in Canada
Preinstallation Requirements for Canon Facsimile
Equipment
A. Location
Supply a suitable table, cabinet, or desk for the machine.
See "Specifications" in this guide for specific dimensions
and weight.
B. Order Information
1.A single telephone line (touch-tone or rotary) should
be used.
2.Order a CA11A modular jack which should be installed
by the telephone company. If the CA11A jack is not
present, installation cannot occur.
3.Order a normal business line from your telephone
company's business representative. The line should be
a regular voice grade line or an equivalent one. Use
one line per unit.
DDD (Direct Distance Dial) line
or
IDDD (International Direct Distance Dial) line if you
communicate overseas
NOTE
Canon recommends an individual line following
industry standards, i.e., 2500 (touch-tone) or 500
(rotary/pulse dial) telephones. A dedicated extension
off a PBX (Private Branch eXchange) unit without
"Call Waiting" can be used with your facsimile unit.
Key telephone systems are not recommended
because they send nonstandard signals to individual
telephones for ringing and special codes, which may
cause a facsimile error.
C. Power Requirements
The power outlet should be a three-prong grounded
receptacle (Single or Duplex). It should be independent
from copiers, heaters, air conditioners, or any electric
equipment that is thermostatically controlled. The rated
value is 115 volts and 15 amperes. The CA11A modular
jack should be relatively close to the power outlet to
facilitate installation.
Legal Notices
81
Notice
)) This
product meets the applicable Industry Canada
technical specifications.
)) Before installing this equipment, users should ensure
that it is permissible to be connected to the facilities
of the local telecommunications company. The
equipment must also be installed using an acceptable
method of connection. In some cases, the company's
inside wiring associated with a single line individual
service may be extended by means of a certified
connector assembly (telephone extension cord). The
customer should be aware that compliance with the
above conditions may not prevent deterioration of
service in some situations.
)) The Ringer Equivalence Number is an indication
of the maximum number of devices allowed to be
connected to a telephone interface. The termination
of an interface may consist of any combination of
devices subject only to the requirement that the sum
of the RENs of all the devices does not exceed five.
)) The REN of this product is 1.0.
)) Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated
by the supplier. Any repairs or alterations made by the
user to this equipment, or equipment malfunctions,
may give the telecommunications company cause to
request the user to disconnect the equipment.
)) Users should ensure for their own protection that
the electrical ground connections of the power
utility, telephone lines, and internal metallic water
pipe system, if present, are connected together. This
precaution may be particularly important in rural
areas.
CAUTION
Users should not attempt to make such connections
themselves, but should contact the appropriate
electric inspection authority, or electrician, as
appropriate.
NOTE
This equipment complies with the Canadian ICES-003
Class B limits.
82
Legal Notices
Utilisation au Canada
Conditions à Remplir Préalablement à L'installation d'un
Télécopieur Canon
A. Emplacement
Prévoir une table, un meuble, ou un bureau
suffisamment solide et de taille appropriée (voir
"Spécifications" pour les indications de poids et
dimensions).
B. Installation téléphonique
1.Une seule ligne téléphonique (tonalités ou impulsions)
doit être utilisée.
2.Il faut commander un jack modulaire CA11A qui sera
installé par la compagnie téléphonique. Sans ce jack,
la mise en place serait impossible.
3.Si vous vous abonnez à une nouvelle ligne, demandez
une ligne d'affaires normale de qualité téléphonique
courante ou équivalente. Prenez un abonnement
d'une ligne par appareil.
Ligne automatique interurbaine
ou
Ligne automatique international
(si vous communiquez avec les pays étrangers)
NOTE
Canon vous conseille d'utiliser une ligne individuelle
conforme aux normes industrielles, à savoir: ligne
téléphonique 2500 (pour appareil à clavier) ou
500 (pour appareil à cadran/impulsions). Il est
également possible de raccorder ce télécopieur à
un système téléphonique à poussoirs car la plupart
de ces systèmes émettent des signaux d'appel non
normalisés ou des codes spéciaux qui risquent de
perturber le fonctionnement du télécopieur.
C. Condition d'alimentation
Raccordez le télécopieur à une prise de courant plus
terre à trois branches, du type simple ou double, et
qui ne sert pas à alimenter un copieur, un appareil
de chauffage, un climatiseur ou tout autre appareil
électrique à thermostat. L'alimentation doit être de 115
volts et 15 ampères. Pour faciliter l'installation, le jack
CA11A doit être assez proche de la prise de courant.
Remarques
)) Le
présent matériel est conforme aux spécifications
techniques applicables d'Industrie Canada.
)) Avant d'installer cet appareil, l'utilisateur doit s'assurer
qu'il est permis de le connecter à l'équipement de
la compagnie de télécommunication locale et doit
installer cet appareil en utilisant une méthode de
connexion autorisée. Il se peut qu'il faille étendre la
circuiterie intérieure de la ligne individuelle d'abonné,
qui a été installée par la compagnie, au moyen
d'un jeu de connecteurs homologués (rallonge
téléphonique).
)) L'attention de l'utilisateur est attirée sur le fait que
le respect des conditions mentionnées ci-dessus ne
constitue pas une garantie contre les dégradations de
qualité du service dans certaines circonstances.
)) L'indice d'équivalence de la sonnerie (IES) sert à
indiquer le nombre maximal de terminaux qui
peuvent être raccordés à une interface téléphonique.
La terminaison d'une interface peut consister en une
combinaison quelconque de dispositifs, à la seule
condition que la somme d'indices d' équivalence de la
sonnerie de tous les dispositifs n'excède pas 5.
)) Le nombre d'équivalents sonnerie (REN) de ce produit
est 1.0.
)) Les réparations sur un appareil certifié doivent
être faites par une société d'entretien canadienne
autorisée par le Gouvernement canadien et désignée
par le fournisseur. Toute réparation ou modification
que pourrait faire l'utilisateur de cet appareil, ou tout
mauvais fonctionnement, donne à la compagnie de
télécommunication le droit de débrancher l'appareil.
)) Pour sa propre protection, l'utilisateur doit s'assurer
que les prises de terre de l'appareil d'alimentation,
les lignes téléphoniques et les tuyaux métalliques
internes, s'il y en a, sont bien connectés entre eux.
Cette précaution est particulièrement importante
dans les zones rurales.
Super G3
Super G3 is a phrase used to
describe the new generation of fax
machines that use ITU-T V.34
standard 33.6 Kbps* modems.
Super G3 High Speed Fax machines
allow transmission times of approximately 3 seconds*
per page which results in reduced telephone line
charges.
*Approximately 3 seconds per page fax transmission time based on
CCITT/ITU-T No.1 Chart, (JBIG, Standard Mode) at 33.6 Kbps modem
speed. The Public Switched Telephone Network (PSTN) currently
supports 28.8 Kbps modem speeds or slower, depending on telephone
line conditions.
CAUTION
Au lieu d'essayer de faire ces branchements euxmêmes, les utilisateurs sont invités à faire appel à
un service d'inspection faisant autorité en matière
d'électricité ou à un électricien, selon le cas.
NOTE
Respecte les limites de la classe B de la NMB-003 du
Canada.
Legal Notices
83
Important Safety Instructions
Please read these "Important Safety Instructions" thoroughly before operating the machine. As these
instructions are intended to prevent injury to the user or other persons or destruction of property, always pay
attention to these instructions. Also, since it may result in unexpected accidents or injuries, do not perform
any operation unless otherwise specified in the manual. Improper operation or use of this machine could
result in personal injury and/or damage requiring extensive repair that may not be covered under your
Limited Warranty.
Installation
WARNING
)) Never
block the ventilation slots and louvers on the
machine. These openings are provided for proper
ventilation of working parts inside the machine.
Blocking these openings can cause the machine
to overheat. Never place the machine on a soft
surface, such as a sofa or rug.
)) Do not install the machine in the following
locations:
-- A damp or dusty location
-- A location near water faucets or water
-- A location exposed to direct sunlight
-- A location subject to high temperatures
-- A location near open flames
)) Do not install the machine near alcohol, paint
thinner, or other flammable substances. If
flammable substances come into contact with
electrical parts inside the machine, it may result in a
fire or electrical shock.
)) Do not place the following items on the machine. If
these items come into contact with a high-voltage
area inside the machine, it may result in a fire or
electrical shock.
If these items are dropped or spilled inside the
machine, immediately turn OFF the main power
switch, and disconnect the power cord from the
power outlet. Then, contact your local authorized
Canon dealer.
-- Necklaces and other metal objects
-- Cups, vases, flowerpots, and other containers filled
with water or liquids
CAUTION
Do not install the machine in unstable locations, such
as unsteady platforms or inclined floors, or in locations
subject to excessive vibrations, as this may cause the
machine to fall or tip over, resulting in personal injury.
84
Important Safety Instructions
Power Supply
WARNING
)) Do
not damage or modify the power cord. Also,
do not place heavy objects on the power cord, or
pull on or excessively bend it, as this could cause
electrical damage and result in a fire or electrical
shock.
)) Keep the power cord away from a heat source;
failure to do this may cause the power cord coating
to melt, resulting in a fire or electrical shock.
)) Do not connect or disconnect the power cord with
wet hands, as this may result in electrical shock.
)) Do not connect the power cord to a multiplug
power strip, as this may cause a fire or electrical
shock.
)) Do not bundle up or tie the power cord in a knot, as
this may result in a fire or electrical shock.
)) Insert the power plug completely into the power
outlet, as failure to do so may result in a fire or
electrical shock.
)) Do not use power cords other than the power cord
provided, as this may result in a fire or electrical
shock.
)) As a general rule, do not use extension cords. Using
an extension cord may result in a fire or electrical
shock.
)) Do not use power supplies with voltages other than
those specified herein, as this may result in a fire or
electrical shock.
)) Always grasp the power plug when disconnecting
the power cord. Pulling on the power cord may
expose or snap the core wire, or otherwise damage
the power cord. If the power cord is damaged, this
could cause current to leak, resulting in a fire or
electrical shock.
IMPORTANT
Leave sufficient space around the power plug so
that it can be unplugged easily. If objects are placed
around the power plug, you will be unable to unplug
it in an emergency.
Handling
WARNING
)) Do
not attempt to disassemble or modify the
machine. There are high-temperature and highvoltage components inside the machine which may
result in a fire or electrical shock.
)) If the machine makes strange noises, or gives off
smoke, heat, or strange smells, immediately turn
OFF the main power switch, and disconnect the
power cord from the power outlet. Then, contact
your local authorized Canon dealer. Continued use
of the machine in this condition may result in a fire
or electrical shock.
)) Do not use highly flammable sprays near the
machine. If gas from these sprays comes into
contact with the electrical components inside the
machine, it may result in a fire or electrical shock.
)) To avoid damage to the power cord and creating a
fire hazard, always turn OFF the main power switch,
and unplug the interface cable when moving the
machine. Otherwise, the power cord or interface
cable may be damaged, resulting in a fire or
electrical shock.
)) Make sure that the power plug is firmly inserted
into the power outlet if the machine was moved.
Do not use the machine while the connection is
loose, as doing so may cause a fire.
)) Do not drop paper clips, staples, or other metal
objects inside the machine. Also, do not spill water,
liquids, or flammable substances (alcohol, benzene,
paint thinner, etc.) inside the machine. If these items
come into contact with a high-voltage area inside
the machine, it may result in a fire or electrical
shock. If these items are dropped or spilled inside
the machine, immediately turn OFF the main power
switch, and disconnect the power cord from the
power outlet. Then, contact your local authorized
Canon dealer.
)) Do not use this product for uses other than as a
color digital multitasking machine.
CAUTION
)) Do
not place heavy objects on the machine, as they
may tip over or fall resulting in personal injury.
)) Close the feeder gently to avoid catching your
hands, as this may result in personal injury.
)) Do
not press down hard on the feeder when using
the platen glass to make copies of thick books.
Doing so may damage the platen glass and result in
personal injury.
)) Do not touch the finisher while the machine is
printing, as this may result in personal injury.
)) Paper that has just been output from the machine
may be hot. Be careful when removing or aligning
paper from the output tray. Touching paper right
after it is output may result in low-temperature
burns.
)) Do not place your hands, hair, clothing, etc., near
the exit and feed rollers. Even if the machine is not
in operation, your hands, hair, or clothing may get
caught in the rollers, which may result in personal
injury or damage if the machine suddenly starts
printing.
)) Do not place your hands in the part of the tray
where stapling is performed (near the rollers) when
a finisher is attached, as this may result in personal
injury.
Staple Finisher-S1
)) Do
not insert your hand into the machine while
the paper drawer is removed, as this may result in
personal injury.
Important Safety Instructions
85
)) The
laser beam can be harmful to human bodies.
Since radiation emitted inside the product is
completely confined within protective housings
and external covers, the laser beam cannot
escape from the machine during any phase of
user operation. Read the following remarks and
instructions for safety.
-- Never open covers other than those instructed in
the manuals for this machine.
-- Do not remove the following caution label which
is attached to the machine. If the label has been
removed, contact your local authorized Canon
dealer.
-- If the laser beam escapes from the machine,
exposure may cause serious damage to your eyes.
-- Controlling, adjusting, or operating the machine
in ways not mentioned in the manuals for this
machine may cause dangerous radiation to
escape from the machine.
IMPORTANT
Press
(Energy Saver) for safety when the machine
will not be used for a long period of time, such as
overnight. Also, turn OFF the main power switch,
and disconnect the power cord for safety when the
machine will not be used for an extended period of
time, such as during consecutive holidays.
86
Important Safety Instructions
Maintenance and Inspections
WARNING
)) When
cleaning the machine, first turn OFF the main
power switch, then disconnect the power cord.
Failure to observe these steps may result in a fire or
electrical shock.
)) Unplug the power plug periodically and clean with
a dry cloth to remove dust and grime. Accumulated
dust may absorb humidity in the air and may result
in a fire if it comes into contact with electricity.
)) Clean the machine using a slightly dampened cloth
with a mild detergent mixed with water. Do not use
alcohol, benzene, paint thinner, or other flammable
substances. Check detergent for flammability prior
to use. If flammable substances come into contact
with a high-voltage area inside the machine, it may
result in a fire or electrical shock.
)) There are some areas inside the machine which
are subject to high-voltages. When removing
jammed paper or when inspecting the inside of the
machine, do not allow necklaces, bracelets, or other
metal objects to touch the inside of the machine, as
this may result in burns or electrical shock.
)) Do not burn or throw used toner cartridges into
open flames, as this may cause the toner remaining
inside the cartridges to ignite, resulting in burns or
a fire.
)) Make sure that the power plug is firmly inserted
into the power outlet after cleaning the machine.
Do not use the machine while the connection is
loose, as doing so may cause a fire.
)) Check the power cord and power plug regularly. If
the following conditions occur, contact your local
authorized Canon dealer, as the condition may
cause a fire:
-- There are burn marks on the power plug.
-- The blade on the power plug is deformed or
broken.
-- The power goes OFF and ON when the power
cord is bent.
-- There are cuts, cracks, or indentations on the
power cord.
-- A part of the power cord becomes hot.
)) Check the power cord and power plug regularly
to make sure that they are not handled in the
following manner, as this may result in a fire or
electrical shock:
-- The connection part of the power plug is loose.
-- Stress is being applied to the power cord by a
heavy object or by affixing it with staples.
-- The power plug is loose.
-- The power cord is tied in a bundle.
-- The power cord protrudes into a walkway.
-- The power cord is in front of a heater.
CAUTION
)) The
fixing unit and its surroundings inside the
machine may become hot during use. When
removing jammed paper or when inspecting the
inside of the machine, do not touch the fixing unit
and its surroundings, as doing so may result in
burns or electrical shock.
)) When removing jammed paper or when inspecting
the inside of the machine, do not expose yourself
to the heat emitted from the fixing unit and its
surroundings for a prolonged period of time. Doing
so may result in low temperature burns, even
though you did not touch the fixing unit and its
surroundings directly.
)) There are high-temperature and high-voltage
components inside the machine. Touching them
may result in personal injury or burns. Do not touch
the internal parts of the machine which are not
instructed to in the manuals for the machine.
Consumables
WARNING
)) Do
not burn or throw used toner cartridges into
open flames, as this may cause the toner remaining
inside the cartridges to ignite, resulting in burns or
a fire.
)) Do not store toner cartridges or copy paper in
places exposed to open flames, as this may cause
the toner or paper to ignite, resulting in burns or a
fire.
)) If you accidentally spill or scatter toner, carefully
wipe up the loose toner with a damp, soft cloth and
avoid inhaling any toner dust. Do not use a vacuum
cleaner that is not equipped with safety measures
to prevent dust explosions to clean up loose toner.
Doing so may cause damage to the vacuum cleaner
or result in a dust explosion due to static discharge.
)) For cardiac pacemaker users:
This drum unit emits low level magnetic flux. If you
use a cardiac pacemaker and feel abnormalities,
please move away from the drum unit, and consult
a physician.
CAUTION
)) Keep
toner and other consumables out of the reach
of small children. If these items are ingested, consult
a physician immediately.
)) Do not dismantle the toner cartridge, as doing so
may cause toner to fly out and enter your eyes or
mouth. If toner gets into your eyes or mouth, wash
them immediately with cold water and immediately
consult a physician.
)) If toner escapes from the toner cartridge, make sure
not to ingest the toner or allow it to directly touch
your skin. If toner touches your skin, wash it away
with soap and water. If your skin still feels irritated
after washing it, or you ingest toner, consult a
doctor immediately.
Important Safety Instructions
87
Telephone Equipment
WARNING
When using telephone equipment incorporated into
this machine, basic safety precautions should always
be followed to reduce the risk of fire, electrical shock,
or injury to persons, including the following:
1.Do not use this machine where there is a potential
for contact with water or other liquid.
2.Do not use the telephone equipment during an
electrical storm, as there may be a remote risk of
electrical shock from lightning.
3.Do not use the telephone equipment to report a
gas leak in the vicinity of the leak.
Other Warnings
WARNING
For cardiac pacemaker users:
This product emits low level magnetic flux. If you use
a cardiac pacemaker and feel abnormalities, please
move away from the product and consult your doctor.
88
Important Safety Instructions
CANON imageRUNNER ADVANCE C350iF/C250iF SERIES LIMITED WARRANTY
Canon U.S.A., Inc. or Canon Canada Inc. (as applicable, "Canon") warrants the imageRUNNER ADVANCE C350iF/C250iF
Series product and Canon brand options designed for use with the imageRUNNER product (collectively the "Product") to
be free from defects in workmanship and materials under normal use and service for a period of 90 days after delivery to
the original purchaser ("Purchaser") or 30,000 prints or copies (or a combination of both), whichever comes first. During
such warranty period, Canon shall replace, without charge, any defective part with a new or comparable rebuilt part. This
warranty shall not extend to consumables such as paper, chemicals, and toner as to which there shall be no warranty or
replacement. Warranty replacement shall not extend the original warranty period of the Product.
This limited warranty shall only apply if the Product is used in conjunction with compatible computers, peripheral
equipment and software. Canon shall have no responsibility for such items except for compatible Canon brand peripheral
equipment covered by a separate warranty ("Separate Warranty"). Repairs of such Canon brand peripheral equipment shall
be governed by the terms of the Separate Warranty. Non-Canon brand equipment that may be distributed with the Product
is sold "AS IS" and without warranty of any kind by Canon, including any implied warranty regarding merchantability or
fitness for a particular purpose, and all such warranties are disclaimed. The sole warranty, if any, with respect to such nonCanon brand items is given by the supplier or producer thereof. For further information on software, see below.
This warranty shall be void and of no force and effect if the Product is damaged as a result of (a) abuse, neglect,
mishandling, alteration, electric current fluctuation or accident, (b) improper use, including failure to follow operating or
maintenance instructions or environmental conditions prescribed in Canon's operator's manual or other documentation,
(c) installation or repair by other than authorized service representatives qualified by Canon who are acting in accordance
with Canon's service bulletins, (d) use of supplies or parts (other than those distributed by Canon) which damage the
Product or cause abnormally frequent service calls or service problems, or (e) use of the Product with non-compatible
computers, peripheral equipment or software, including the use of the Product in any system configuration not
recommended in any manual distributed with the Product. Nor does this warranty extend to any Product on which the
original identification marks or serial numbers have been defaced, removed, or altered.
ANY SOFTWARE THAT IS DISTRIBUTED WITH THE PRODUCT AND HAS AN ASSOCIATED END USER AGREEMENT IS
LICENSED, WARRANTED AND PROVIDED ACCORDING TO THE TERMS OF THAT AGREEMENT, INCLUDING ANY LIMITATIONS
AND DISCLAIMERS THEREIN. SUCH SOFTWARE IS SOLD WITHOUT WARRANTY OF ANY KIND BY CANON. PLEASE CONTACT
CANON IMMEDIATELY IF YOU HAVE NOT RECEIVED A COPY OF THE SOFTWARE SUPPLIER'S END USER AGREEMENT. CANON
RECOMMENDS THAT DATA STORED ON THE PRODUCT'S HARD DISK DRIVE BE DUPLICATED OR BACKED UP TO PREVENT ITS
LOSS IN THE EVENT OF FAILURE OR OTHER MALFUNCTION OF THE HARD DISK DRIVE.
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, INCLUDING
ANY IMPLIED WARRANTIES AND CONDITIONS REGARDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
RELATING TO THE USE OR PERFORMANCE OF A PRODUCT OR ANY ASSOCIATED COMPONENT, AND ALL SUCH OTHER
WARRANTIES AND CONDITIONS ARE DISCLAIMED. NO OTHER EXPRESS WARRANTY, CONDITION OR GUARANTY, EXCEPT
AS MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THE PRODUCT SHALL BIND
CANON ANY SUPPLIER OR ANY AUTHORIZED SERVICE PROVIDER. NO WARRANTY IS GIVEN ON ANY USED PRODUCT.
NEITHER CANON OR ITS SUPPLIERS NOR ANY AUTHORIZED SERVICE PROVIDER SHALL BE LIABLE FOR PERSONAL INJURY
OR PROPERTY DAMAGE (UNLESS CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY AUTHORIZED
SERVICE PROVIDER), LOSS OF REVENUE OR PROFIT, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, EXPENDITURES
FOR SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF DATA, INCLUDING, WITHOUT LIMITATION, DATA
STORED ON THE PRODUCT'S HARD DISK DRIVE, STORAGE CHARGES OR OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON
WHICH THE CLAIM IS BASED AND EVEN IF CANON OR ITS SUPPLIERS OR ANY AUTHORIZED SERVICE PROVIDER HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON OR
ITS SUPPLIERS OR ANY AUTHORIZED SERVICE PROVIDER BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE
PRODUCT CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, THE PURCHASER ASSUMES ALL RISKS
AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PERSONS AND PROPERTY OF THE PURCHASER OR OTHERS ARISING
OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE PRODUCT NOT CAUSED SOLELY AND DIRECTLY BY THE
NEGLIGENCE OF CANON OR ANY AUTHORIZED SERVICE PROVIDER. THIS WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THE ORIGINAL PURCHASER OF THE PRODUCT AND STATES SUCH PURCHASER'S EXCLUSIVE REMEDY.
CONDITIONS OF WARRANTY
Defective parts must be returned to Canon or an Authorized Service Provider with all necessary documentation and will
become the property of Canon.
THIS WARRANTY APPLIES TO PRODUCTS SOLD AND USED IN THE U.S.A. AND CANADA ONLY.
Important Safety Instructions
89
TERMS OF imageWARE REMOTE SERVICE
90
Important Safety Instructions
TERMS OF Content Delivery System
If the Content Delivery System (CDS) Service is enabled for your Canon Office Imaging Product ("Product"), Canon USA,
Canon Canada or their respective authorized independent Canon retail dealers (each a "Canon Seller") can arrange
internet-based downloads for purposes of updating firmware, delivering purchased MEAP application software and
activation of optional Product features. Certain related data files also may be downloaded (e.g. End-User License
Agreements, conditions of export, Release Notes) to your Product. The internet communications will occur between the
Product and one or more servers managed by Canon Inc. ("Canon Server"). CDS Service will not download the firmware,
software or data files for purposes other than mentioned above.
You can read more about CDS Service in Canon published materials available from your dealer or on the web sites of
Canon USA [www.usa.canon.com] or Canon Canada [www.canon.ca.]. These materials include a Technology White Paper
for the CDS Service.
Your instruction to Canon USA, Canon Canada or your dealer to use CDS Service or your use of CDS Service for a Product
shall be considered
(i) a representation that you have an internal IP network and internet access available to Products connected to that
network on a generally continuous basis;
(ii) a representation that you have an internet connection and internal network bandwidth available for the Canon Server
to download files to each of the Products receiving the CDS Service. Downloaded files may vary in size; some will be on
the order of several hundred MB. The CDS Service Technology White Paper contains further details.
(iii) authorization by you for the Canon Seller to establish, and perform during the period of provision of Service, HTTPS/
HTTP communications using your internet and internal network bandwidth for transmissions to and from the CDS Server;
(iv) authorization by you for the Product itself or a Canon serviceperson to download or update firmware and purchased
MEAP application software, data for internet-based activation of optional Product features and certain related data files to
Product from the CDS Server, and to transmit service data (e.g. serial number, information of firmware) of Product to the
CDS Server.
You acknowledge and agree that the Canon Seller and CDS Server may rely on internet addresses you assign to Products
and that using the internet has benefits but also certain risks; ACCORDINGLY, YOU AGREE THAT THE CDS SERVICE IS
PROVIDED WITHOUT WARRANTY OF ANY KIND, THAT ANY WARRANTIES ARE DISCLAIMED AND THAT NO CANON SELLER
OR CANON AFFILIATE IS RESPONSIBLE FOR ANY INJURY TO YOUR NETWORK OR TO DATA OR DEVICES NOT SUPPLIED BY A
CANON SELLER. You will be responsible for network security and any data back-up. You will timely advise the Canon Seller
of any security procedures the Canon Seller will need to use to provide CDS Services as described herein.
To the extent downloads involve presenting end user license terms on your network or network-connected Products
(with a Canon Seller, Canon affiliate or a third party as licensor) seeking agreement to such terms, any party that you allow
to respond to presented license terms will be and is authorized by you to agree (or not agree) to the terms; if license
terms are not agreed, a license purchased will not be enabled and you may apply for refund of any license fees paid.
You acknowledge and agree that the firmware provided by the CDS Service is governed by the Third Party Software terms
set forth in this manual.
Important Safety Instructions
91
92
Important Safety Instructions
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A., INC.
One Canon Park, Melville, NY 11747, U.S.A.
CANON CANADA INC.
6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada
CANON EUROPA N.V.
Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands
(See http://www.canon-europe.com/ for details on your regional dealer)
CANON LATIN AMERICA, INC.
One Canon Park, Melville, NY 11747, U.S.A.
CANON AUSTRALIA PTY. LTD
1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113, Australia
CANON CHINA CO., LTD
15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue #04-01 Keppel Bay Tower, Singapore 098632
CANON HONGKONG CO., LTD
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
FT6-0502 (000)
XXXXXXXXXX
© CANON INC. 2014
PRINTED IN CHINA
Download PDF

advertising