ET2800 Series
ET2800 Series
Electronic Controls
ET2800 Series
Project:
365/7-Day Astronomic Electronic Control
Location:
The ET2800 Series 365/7-Day Astronomic Electronic Controls
Product Type:
feature independent 7-day programming for convenient flexibility
when load switching differs daily. These electronic controls provide
Contact/Phone:
dependable and uncomplicated performance, plus to-the-minute
programming for accurate load control and reduced energy costs.
Model #:
Up to 48 ON and 48 OFF events can be preset to automatically repeat.
Each event can be applied to any combination of circuits and days.
Each circuit can be independently scheduled for Astronomic
(Dusk/Dawn) ON/OFF events. In addition, the programming can be easily
disabled by changing to the manual operating mode. An additional mode
of operation allows for ON/OFF buttons to be used as a 2-hour override,
in compliance with current regulations. Manual circuit control buttons
operate circuits independently, based on the mode of operation.
50 Holiday Block Scheduling exception dates are available to prevent
regularly scheduled events, or allow for a holiday schedule. All models
come equipped with a supercapacitor to provide time and date retention
for a minimum of 100 hours, and do not require batteries. Each
electronic control is housed in a lockable enclosure for vandalism
and tampering protection.
Features
• Program can be repeated on a weekly basis
• Multi-volt operation from 120-277 VAC 60 Hz, with
auto-voltage detection
• To-the-minute programming for accurate load control and reduced
energy costs
• Astronomic feature provides sunset ON and sunrise OFF settings,
eliminating the need for separate photo control devices
• Astronomic programming can be combined with independent
programs to provide a sunset ON and timed OFF program
• Relays with Zero-Cross Technology to extend the life of the control
• 2-circuit models are field configurable for: 2 independent outputs,
DPST output, or 1 channel ON pulse/OFF pulse output
• 4-circuit models are field configurable for: 4 independent outputs,
2 DPST outputs, 1 DPST and 2 SPST, or 2 channel
ON pulse/OFF pulse output
• USB port to easily copy and paste schedules from one control to
another or simply backup schedule
• Automatic Daylight Saving Time (DST) ON/OFF adjustment
• Non-volatile EEPROM memory for lifetime programming protection
• Temporary override or permanent manual override available via
control buttons
• Additional mode of operation allowing ON/OFF buttons to become a 2
hour override control
• 100-hour super capacitor eliminates battery dependency
• 50 Holiday Blocks with schedules
ET2825C
ET2845CP
Ratings
Enclosure Options:
Standard: Type 1 Gray Painted Steel
CR: Type 3R Gray Metal Enclosure
CP: Type 3R High-Impact UV Resistant
Polycarbonate Plastic with Clear Cover
Knockouts:
Combination ½" & ¾" Knockouts
Bottom: 2, Left: 1, Right: 1, Back: 1
Input Voltage: 120, 208, 240, or 277 VAC 50/60 Hz
ET2805CR
TITLE
20
LISTED
Energy Controls
ET2800 Series
Operating Temperature: -40° F to 155° F (-40° C to 68° C)
ET2800 Models
NO Contact Ratings:Resistive: 30 A @ 120/240 VAC
Resistive: 20 A @ 28 VDC
Inductive: 30 [email protected] 120/240 VAC
Tungsten: 5 A @ 120/240 VAC
Magnetic Ballast: 20 A @ 277 VAC
Electronic Ballast/LED: 10 A @ 120/277 VAC
Motor: 1 HP @ 120 VAC
Motor: 2 HP @ 240 VAC
SPDT NO Contact Ratings:Resistive: 20 A @ 120-240 VAC
Resistive: 20 A @ 28 VDC
Inductive: 20 A @ 120-240 VAC
Magnetic Ballast: 20 A @ 120-277 VAC
Electronic Ballast/LED: 10 A @ 120/277 VAC
Motor: 1 HP @ 120 VAC
Motor: 2 HP @ 240 VAC
SPDT NC Contact Ratings:Resistive: 10 A @ 120-240 VAC
Resistive: 10 A @ 28 VDC
Inductive: 10 A @ 120-240 VAC
Magnetic Ballast: 3 A @ 120-277 VAC
Motor: ¼ HP @ 120 VAC
Motor: ½ HP @ 240 VAC
Pulse Feature: 2-second pulse option for contactor and bell ringing applications
(2 and 4-circuit models only)
Auto DST: Automatic adjustment for Daylight Saving Time
Super Capacitor Backup: A super capacitor to maintain date and time accuracy for a minimum of 100-hours if
power is lost
Wiring Terminals:
#18 to #10 AWG wire
Minimum ON/OFF Time:
1 minute
Maximum ON/OFF Time: 6 days, 23 hours, 59 minutes
Warranty:
Limited 2 year
Model Number
Circuits
Switch
Volts AC
Rating
Enclosure
Shipping Weight
ET2805C
1
SPST
120-277 VAC
30 A
Indoor Metal
2.95 lbs.
ET2805CP
1
SPST
120-277 VAC
30 A
Indoor/Outdoor Plastic
2.25 lbs.
ET2805CR
1
SPST
120-277 VAC
30 A
Outdoor Metal
3.30 lbs.
ET2815C
1
SPDT
120-277 VAC
20 A
Indoor Metal
2.95 lbs.
ET2815CP
1
SPDT
120-277 VAC
20 A
Indoor/Outdoor Plastic
2.25 lbs.
ET2815CR
1
SPDT
120-277 VAC
20 A
Outdoor Metal
3.30 lbs.
ET2825C
2
SPST
120-277 VAC
30 A
Indoor Metal
2.95 lbs.
ET2825CP
2
SPST
120-277 VAC
30 A
Indoor/Outdoor Plastic
2.25 lbs.
ET2825CR
2
SPST
120-277 VAC
30 A
Outdoor Metal
3.30 lbs.
ET2845C
4
SPST
120-277 VAC
30 A
Indoor Metal
2.95 lbs.
ET2845CP
4
SPST
120-277 VAC
30 A
Indoor/Outdoor Plastic
2.25 lbs.
ET2845CR
4
SPST
120-277 VAC
30 A
Outdoor Metal
3.30 lbs.
All 2 or 4-circuit models can be wired to DPST
2-circuit models = 2 x SPST or 1 x DPST
4-circuit models = 4 x SPST, 2 x DPST, or 1 x DPST and 2 x SPST
Energy Controls
www.intermatic.com
XXXXXXXX
ET2800
Series
Specification
The 365/7-Day Astronomic Electronic Control shall be capable of permitting up to 48 ON/48 OFF events. In addition, the
electronic control shall include selectable Astronomic (dusk/dawn) settings for each day and circuit to allow load
switching at sunset and/or sunrise without a photo control device. The electronic control shall provide a minimum ON
or OFF time of 1 minute. The electronic control to be powered by ___ (120)(208)(240)(277) VAC, ___ 60 Hz power supply.
The electronic control mechanism features a snap-in design to provide easy mechanism removal for mounting the
enclosure. The electronic control enclosure shall be a _____ (Type 1 Steel)(Type 3R Steel)(Type 3R Plastic) lockable
enclosure that shall be painted with an electrostatic process to eliminate the potential for corrosion. The electronic
control shall provide clear terminal identification on a transparent non-curling terminal insulator. The electronic control
shall have a USB port to provide for schedule backup and transfer capabilities. Switch configuration shall be _____
(SPST)(DPST)(SPDT) with a UL or CSA listed switch rating of:
If SPST:
If SPDT:
• Resistive: 30 A @ 120/240 VAC
• Resistive: 20 A @ 120/240 VAC
• Resistive: 20 A @ 28 VDC
• Resistive: 20 A @ 28 VDC
• Inductive: 30 A @ 120/240 VAC
• Inductive: 20 A @ 120/240 VAC
• Tungsten: 5 A @ 120/240 VAC
• Magnetic Ballast: 20 A @ 120/240 VAC
• Ballast: 20 A @ 120-277 VAC
• Electronic Ballast: 10 A @ 120/277 VAC
• Electronic Ballast: 10 A @ 120/277 VAC
• Motor: 1 HP @ 120 VAC
• Motor: 1 HP @ 120 VAC
• Motor: 2 HP @ 240 VAC
• Motor: 2 HP @ 240 VAC
The electronic control shall be UL or CSA listed under UL category 916 Energy Management Equipment and shall be
Intermatic model ________________(See Model Numbers Listed).
Diagrams
TIMER
POWER
All Units
CIRCUIT 1
TIMER
POWER
TIMER POWER
AC IN
CIRCUIT 1
CIRCUIT 2
CIRCUIT 3
CIRCUIT 4
NO-1 COM1 NC-1
L1
LOAD1
L2/N
LOAD2
AC IN
AC IN
OUTPUT CONFIGURATION - SPDT
L1
L2/N
L2/N
LOAD 1
POWER TO TIMER
120/208/240/277
VAC
SPDT
(AUTO VOLTAGE, NO JUMPERS REQUIRED)
TIMER
POWER
CIRCUIT 1
LOAD 2
N
L3
N
LOAD 3
L4
N
LOAD 4
L5
N
L6
4 - INDIVIDUAL 120/277 VAC LOADS
OUTPUT CONFIGURATION: IND - CIRCUIT 1 AND 2
OUTPUT CONFIGURATION: IND - CIRCUIT 3 AND 4
1 Circuit SPST
TIMER
POWER
NO-1 COM1 NO-2 COM2 NO-3 COM3 NO-4 COM4
L1
CIRCUIT 1
CIRCUIT 2
AC IN
CIRCUIT 3
TIMER
POWER
CIRCUIT 4
CIRCUIT 1
CIRCUIT 2
CIRCUIT 3
CIRCUIT 4
NO-1 COM1
L1
L2/N
LOAD 1
AC IN
NO-1 COM1 NO-2 COM2 NO-3 COM3 NO-4 COM4
TIMER CONFIGURATION
1 Circuit
SPDTFOR TWO 208/240 VAC DPST
OUTPUT CONFIGURATION: SIM
- CIRCUIT 1 AND 2
SPST
OUTPUT CONFIGURATION: SIM - CIRCUIT 3 AND 4
TIMER
POWER
TIMER
POWER
CIRCUIT 1
TIMER CONFIGURATION FOR TWO CONTACTOR CONTROLS
OUTPUT CONFIGURATION: PUL - CIRCUIT 1 AND 2
OUTPUT CONFIGURATION: PUL - CIRCUIT 3 AND 4
CIRCUIT 1
CIRCUIT 2
AC IN
CIRCUIT 3
OPEN
L2/N
LOAD 2
COM
L2
OUTPUT CONFIGURATION: IND
(120/277 VAC LOAD)
CLOSE
LOAD 1
OPEN
L1
NO-1 COM1 NO-2 COM2 NO-3 COM3 NO-4 COM4
L1
L
CLOSE
N
COM
AC IN
TIMER
POWER
CIRCUIT 4
NO-1 COM1 NC-1
CIRCUIT 1
CIRCUIT 2
CIRCUIT 3
CIRCUIT 4
L1
LOAD1
L2/N
AC IN
L1
LOAD2
COM2 NO-3
NO-1 COM1
NO-2
COM3 NO-4 COM4
OUTPUT
CONFIGURATION
- SPDT
L2/N
AC IN
NO-1 COM1 NO-2 COM2 NO-3 COM3 NO-4 COM4
L1
L2/N
LOAD 1
N
LOAD 2
L3
SPDT
N
L4
LOAD 1
LOAD 3
L5 L6
LOAD 2
L3 L5
N
LOAD 3
L6
N
L7
Energy Controls
ET2800 Series
L1
L2/N
LOAD 1
L1
L1
OPEN
COM
CLOSE
TION FOR 240 VAC DPST
FIGURATION: SIM
4 Circuit SPST
L2/N
AC IN
AC IN
NO-1
NO-2
NO-3
COM3
NO-4
COM4
IND/IND
COM2
ACCOM2
IN NO-2
AC
IN COM1
NO-1
COM1
NO-3
COM3
NO-4
L1
L1
L1
L1
IND/SIM
L2/N
L2/N
L2/N
L2/N
IND/PUL
TIMER CONFIGURATION FOR CONTACTOR CONTROL
POWER TO TIMER
SPDT
L1
SPDT
L2/N
2 CIRCUIT
MODELS
TIMER
CIRCUIT
CIRCUIT 2
CIRCUIT 3
CIRCUIT 4
2 CIRCUITPOWER
MODELS
TIMER
TIMER1 TIMER
CIRCUIT
CIRCUIT
CIRCUIT
CIRCUIT
CIRCUIT1 1CIRCUIT
CIRCUIT
CIRCUIT
CIRCUIT
1 22CIRCUIT
2 33CIRCUIT
3 44CIRCUIT 4
TIMER
CIRCUIT
CIRCUIT 2
CIRCUIT 3 CIRCUIT
CIRCUIT 4
TIMER 1 CIRCUIT
CIRCUIT1 1 CIRCUIT
CIRCUIT2 2
CIRCUIT33 CIRCUIT
CIRCUIT44
POWER
TIMER
POWER CIRCUIT 1
CIRCUIT 2
CIRCUIT 3
CIRCUIT 4
2 CIRCUIT
MODELS
POWER
CIRCUIT 4
LOAD
AC1 IN
L1
N
L4
N
L5
N
L6
N
L3
N
L4
N
L5
N
L6
LOAD 2
LOADVAC
1 LOADS
4 - INDIVIDUAL 120/277
4 - INDIVIDUAL 120/277 VAC LOADS
L2
TIME
OUTPUT CONFIGURATION: IND - CIRCUIT 1 AND 2 TIMER
OUTPUT CONFIGURATION:
- CIRCUIT
1 AND 2CIRCUIT 1 POW
OUTPUT CONFIGURATION:
IND - CIRCUITIND
3 AND
4 POWER
OUTPUT
CONFIGURATION:
IND208/240
- CIRCUIT
AND 4
TIMER
CONFIGURATION
FOR TWO
VAC3DPST
AC IN
L3
CIRCUIT 1
TIMER
POWER
POWER
POWER POWER
LOAD
2 NO-2LOAD
3 NO-3 LOAD
NO-1
COM1
COM2
COM3 4NO-4 COM4
LOAD 1
LOAD 2
LOAD 3
LOAD 4
N
OUTPUT CONFIGURATION: SIM - CIRCUIT 1 AND 2
OUTPUT CONFIGURATION: SIM - CIRCUIT 3 AND 4
CIRCUIT
TIMER 1
TIMER
POWER
POWER
NO-1 COM1
AC
CIRCUIT 3
CIRCUIT 4
IN
COM1 4
CIRCUIT 2 AC
CIRCUIT
3NO-1CIRCUIT
CIRCUIT 3
CIRCUIT 4L1
L1
L2/N
L2/N
LOAD 1
CIRCUIT 2
CIRCUIT 1
CIRCUIT 1
CIRCUIT 2
L1
L2/N
CIRCUIT 4
TIMER
POWER
TIMER
POWER
CIRCUIT 1
CIRCUIT 2
CIRCUIT 3
NO-4 COM4
CIRCUIT 4
TIMER
POWER
L1
L2/N
L1
L2/N
LOAD 1
L2/N
LOAD 2
N
LOAD 3
L6
N
LOAD 3
L7
L2/N
OPEN
CLOSE
COM
N
CUIT 4
TIMER
POWER
L1
L2/N
L5 L6
LOAD)
LOAD)
CIRCUIT 2
CIRCUIT 3
TIMER
TIMER
1 2 CIRCUIT
CIRCUIT
CIRCUIT 1 CIRCUIT
CIRCUIT
CIRCUIT
CIRCUIT
CIRCUIT
12 3 CIRCUIT
23 4 CIRCUIT
CIRCUIT 34
POWER
POWER
AC IN
4 COM4
CIRCUIT 1
CIRCUIT 4
TIMER
CIRCUIT
4
POWER
NO-1 COM1 NO-2 COM2 NO-3 COM3 NO-4 COM4
L1
COM2
ACCOM4
IN
NO-1
NO-2
NO-3
COM3
NO-4
AC INCOM1
NO-1
NO-2
NO-3
COM3
NO-4
COM4
COM2
ACCOM1
INCOM2
NO-1
COM1
NO-2
NO-3 COM4
COM3 NO-4
AC IN
L1 L2/N
L1
LOAD 2
LOAD1
L2/N
L2/N
LOAD 1
240VAC
LOAD1
LOAD2
LOAD 2
LOAD2
L3 L5
LOAD3
LOAD3
N
L1
L1
L2/NLOAD 3
L2/N
L6
N
NN
L4
L3
OPEN
CLOSE
OPEN
COM
COM
N
L4
LOAD 3
TIMER
TIMER
POWER
POWER
CIRCUIT
TIMER 11
CIRCUIT
POWER
L1
L1
L2/N
L2/N
L2/N
CIRCUIT
2 2 CIRCUIT
3
4
CIRCUIT
CIRCUIT
3CIRCUIT
CIRCUIT
4
CIRCUIT 1
CIRCUIT 2
CIRCUIT 3
COM2NO-2
NO-1
COM1 NO-1
NO-2 COM1
NO-3 COM2
COM3NO-3
NO-4COM3
COM4NO-4 COM4
AC IN
LOAD 1
LOAD1
LOAD2 3
LOAD
1 LOAD 2 LOAD3
LOAD
LOAD2
L3 L5
L7
N
NL3 L5L6
L3
N
NN
L4
AC IN
CIRCUIT 2
L7
OUTPUT CONFIGURATION: IND - CIRCUIT 3 AND 4
TIMER
POWER
TIMER
CIRCUIT
POWER 1
CIRCUIT
CIRCUIT1 2
CIRCUIT
2 3
CIRCUIT
CIRCUIT
CIRCUIT34
CIRCUIT
L7
IND/IND
AC IN
IND/SIM
IND/PUL L1
L1
SIM/IND
PUL/IND
COM2
AC
INSIM/SIM
NO-1
COM1
NO-2
NO-3
COM3
NO-4 COM4
COM2
NO-1
COM1
NO-2
NO-3
COM3
NO-4
COM4
PUL/SIM
SIM/PUL
PUL/PUL
LOAD2
LOAD2
LOAD3
LOAD1
Note:
LOAD1
L2/N Simultaneous
L2/N
IND= IndependentSIM=
N
LOAD1
L3
N
N
LOAD3
LOAD1
L3
L4
PUL= PulseLOAD 2
N
L4
LOAD 2
AC IN
L1
L1
L2/N
L2/N
4
AC IN
COM2NO-2
NO-1
COM1 NO-1
NO-2 COM1
NO-3 COM2
COM3NO-3
NO-4COM3
COM4NO-4 CO
LOAD1
LOAD1
LOAD 2
LOAD 2
TIMER CONFIGURATION
FOR COMBINATION
MODE
TIMER CONFIGURATION
FOR COMBINATION
MODE
240VAC
240VAC
240VAC 240VAC
OUTPUT CONFIGURATION:
- CIRCUIT
AND 2 (BELL RINGING)
OUTPUT CONFIGURATION:
PUL - CIRCUIT 1PUL
AND
2 (BELL 1RINGING)
OUTPUT CONFIGURATION:
- CIRCUIT
3 AND 4
OUTPUT CONFIGURATION:
IND - CIRCUIT 3IND
AND
4
TIMER CONFIGURATION
FOR COMBINATION
MODE
TIMER CONFIGURATION
FOR COMBINATION
MODE
TIMER CONFIGURATION
FOR COMBINATION
MODE
TIMER CONFIGURATION
FOR COMBINATION
MODE
OUTPUT CONFIGURATION:PUL
- CIRCUIT
AND 2 (BELL RINGING
OUTPUT CONFIGURATION:PUL
CIRCUIT
1 AND
2 (BELL RINGING)
OUTPUT CONFIGURATION:PUL
- CIRCUIT 1- AND
2 (BELL
RINGING)
OUTPUT CONFIGURATION:PUL
- CIRCUIT 1 AND
2 (BELL1 RINGING)
OUTPUT
CONFIGURATION:
SIM
CIRCUIT
3
AND
4
(208/240
OUTPUT CONFIGURATION:
SIM3- AND
CIRCUIT
3 AND VAC
4 (208/240
OUTPUT CONFIGURATION:
SIM - CIRCUIT
4 (208/240
LOAD)VAC LOAD)
OUTPUT CONFIGURATION: SIM - CIRCUIT 3 AND 4 (208/240 VAC LOAD) VAC LOA
CIRCUIT 3
CIRCUIT 4
NO-1 COM1 NO-2 COM2 NO-3 COM3 NO-4 COM4
www.intermatic.com
Energy Controls
L1
L2/N
N
TIMER CONFIGURATION
FOR COMBINATION
MODE
TIMER CONFIGURATION
FOR COMBINATION
MODE
TIMER
CONFIGURATION
FOR- COMBINATION
OUTPUT
CONFIGURATION:
SIM
CIRCUITSIM
1 AND
2 (208/240
VAC
LOAD) VAC LOAD)
OUTPUT CONFIGURATION:
- MODE
CIRCUIT
1 AND
2 (208/240
OUTPUT CONFIGURATION:
PULIND
- CIRCUIT
1 AND
(BELL
RINGING)
OUTPUT
CONFIGURATION:
- CIRCUIT
3 2AND
4 (120/277
VAC
LOAD) VAC LOAD)
OUTPUT CONFIGURATION:
IND
- CIRCUIT
3 AND
4 (120/277
COM2 NO-4
NO-1 COM2
COM1 NO-3
NO-2 COM3
NO-3 COM3
AC COM1
IN
NO-1
NO-2
COM4 NO-4 COM4
OUTPUT CONFIGURATION: IND - CIRCUIT 3 AND 4 (120/277 VAC LOAD)
CIRCUIT 1
LOAD 3
L6L7
TIMER CONFIGURATION
FOR COMBINATION
MODE
TIMER CONFIGURATION
FOR COMBINATION
MODE
OUTPUT CONFIGURATION:
PUL1 -AND
CIRCUIT
1 AND
2 (BELL RINGING)
OUTPUT CONFIGURATION:
PUL - CIRCUIT
2 (BELL
RINGING)
OUTPUT CONFIGURATION:
IND3 -AND
CIRCUIT
3 AND 4
OUTPUT CONFIGURATION:
IND - CIRCUIT
4
TIMER
CIRCUIT 4
NO-1 COM1 NO-2 COM2 NO-3 COM3 NO-4 COM4
AC IN
There are many different ways to set the relays on the
TIMER1
CIRCUIT
CIRCUIT
23 The
CIRCUIT
CIRCUIT
4 be used
CIRCUIT
CIRCUIT
CIRCUIT
ET2800CIRCUIT
Series21Time
Switch.
four43 relays
can
POWER
individually or in pairs of two. Refer to the table below for a
TIMER
TIMER
complete list
of ways
to set1 the
relays
the2 illustrations
CIRCUIT
1 2 and
CIRCUIT
3 4 CIRCUIT 4
CIRCUIT
CIRCUIT
CIRCUIT
3 CIRCUIT
CIRCUIT
POWER POWER
for some of the common wiring installations
LOAD1
TIMER CONFIGURATION
CONFIGURATION FOR
COMBINATION
MODE
TIMER
FOR
COMBINATION
MODE
OUTPUT CONFIGURATION:PUL - CIRCUIT 1 AND 2 (BELL RINGING)
N - -CIRCUIT
L3 L4
N 4 (208/240
L4 VAC VAC
OUTPUT
CONFIGURATION:
SIM
1 AND
2 (208/240
N
L3 SIM
NCIRCUIT
OUTPUT
CONFIGURATION:
3 AND
LOAD)LOAD)
POWER
4 CIRCUIT MODELS
L5 L6
SPST
LOAD 3
L5 L6L6N N L6
L5 L7L6 N
N L5
L3
CLOSE
OPEN
OPEN
COM
CLOSE
COM
CLOSE
OPEN
CLOSE
NL3 L5L4
LOAD 2
L3
SPST
TIMER CONFIGURATION
FOR
COMBINATION
MODEFOR COMBINATION
TIMER CONFIGURATION
CONFIGURATION
FOR COMBINATION
TIMER
CONFIGURATION
MODE
TIMER
FOR
MODE
OUTPUT CONFIGURATION:
IND - CIRCUIT
1IND
AND
2 (120/277
VAC22LOAD)
OUTPUT
-- CIRCUIT
(120/277
LOAD)
OUTPUT
CONFIGURATION:
SIM11-AND
CIRCUIT
1 ANDVAC
2 (208/240
OUTPUT CONFIGURATION:
CONFIGURATION:
SIM
CIRCUIT
AND
(208/240
VAC
LOAD)VAC LOAD)
OUTPUT CONFIGURATION:
SIM - CIRCUIT
3SIM
AND
4 (208/240
VAC44LOAD)
OUTPUT
-- CIRCUIT
(208/240
LOAD)
OUTPUT
CONFIGURATION:
IND33-AND
CIRCUIT
3 ANDVAC
4 (120/277
OUTPUT CONFIGURATION:
CONFIGURATION:
IND
CIRCUIT
AND
(120/277
VAC
LOAD)VAC LOAD)
TIMER CONFIGURATION
FOR COMBINATION
MODE
TIMER CONFIGURATION
FOR COMBINATION
MODE
OUTPUT
CONFIGURATION:
INDFOR
CIRCUIT
1 ANDVAC
2 (120/277
VAC LOAD)
OUTPUT CONFIGURATION:
IND - CIRCUIT
1 -AND
2 (120/277
LOAD)
TIMER
CONFIGURATION
TWO
CONTACTOR
CONTROLS
OUTPUT CONFIGURATION:
SIM3 -AND
CIRCUIT
3 ANDVAC
4 (208/240
OUTPUT CONFIGURATION:
SIM - CIRCUIT
4 (208/240
LOAD) VAC LOAD)
OUTPUT CONFIGURATION: PUL - CIRCUIT 1 AND 2
OUTPUT CONFIGURATION: PUL - CIRCUIT 3 AND 4
TIMER
POWER
L3
N
TIMER CONFIGURATION FOR COMBINATION MODE
L1
LOAD1 2LOAD 1 LOAD
3
LOAD
2 LOAD
3 2 3
2 LOAD
LOAD
1 LOAD
LOAD
LOAD
LOAD 1
TIMER CONFIGURATION
FOR TWOIND
CONTACTOR
CONTROLS
TIMER
CONFIGURATION
TWO1 AND
CONTACTOR
CONTROLS
OUTPUT
CONFIGURATION:
-FOR
CIRCUIT
2 (120/277 VAC
LOAD)
OUTPUT
CONFIGURATION:
SIM- -CIRCUIT
CIRCUIT 31 AND
42(208/240 VAC LOAD)
OUTPUT
CONFIGURATION:
PUL
OUTPUT CONFIGURATION:
PULAND
- CIRCUIT
1 AND 2
OUTPUT CONFIGURATION:
PUL
CIRCUIT
3
AND
4
OUTPUT CONFIGURATION: PUL - CIRCUIT
3 AND 4
COM2
NO-1
COM1
NO-2
NO-3
COM3
NO-4
COM4
COM2
ACIN
IN AC
NO-1
COM1
NO-2
NO-3
COM3
NO-4
COM4
COM2
AC
NO-1
NO-2
NO-3
COM3
NO-4
COM4
COM2
IN COM1
NO-1
COM1
NO-2
NO-3
COM3
NO-4 COM4 L1
L2/N
L2/N
L2/N
LOAD 1
TIMER CONFIGURATION FOR COMBINATION MODE
OUTPUT
CONFIGURATION:
SIM - N
CIRCUITL4
1 AND 2 (208/240
N
L3 N N L3 L4
L5 VAC
L6LOAD)L5 L6
OUTPUT CONFIGURATION: IND - CIRCUIT 3 AND 4 (120/277 VAC LOAD)
COM
E
VAC LOAD)
VAC LOAD)
L3 L5
LOADLOAD
1 2
L1L1
OUTPUT C
OUTPUT CONFIGURATION: IND (120/2
(120/277 VAC LOAD)
L
AC IN
L1
LOAD
1
LOAD 2NO-3 LOAD
3 NO-4 COM4
NO-1
COM1
NO-2 COM2
COM3
AC IN
OPEN
L5 L6
L1
LOAD 2
TIMER1 TIMER
TIMER
CIRCUIT
CIRCUIT
CIRCUIT
CIRCUIT
CIRCUIT121CIRCUIT
CIRCUIT
CIRCUIT
CIRCUIT
CIRCUIT
CIRCUIT
CIRCUIT
CIRCUIT
1 223CIRCUIT
2 343CIRCUIT
3 44CIRCUIT 4
POWER POWER
POWER
AC IN
COM2
NO-1
NO-2
NO-3
COM3
NO-4
COM4
COM2
AC INCOM1
NO-1
COM1
NO-2
NO-3
COM3
NO-4 COM4
CLOSE
4 COM4
LOAD 2
NO-1 COM1 NO-2 COM2 NO-3 COM3 NO-4 COM4
AC IN
L1
AC IN
L2/N
N
L2/N CONFIGURATION:
OUTPUT
IND
L2/N
(120/277 VAC LOAD)
TIMER CONFIGURATION
FOR TWO 208/240
TIMER CONFIGURATION
FORVAC
TWODPST
208/240 VAC DPST
OUTPUTTIMER
CONFIGURATION:
SIM - FOR
CIRCUIT
AND
2
OUTPUT
CONFIGURATION:
- CIRCUIT
1CONTROLS
AND 2 CONTROLS
CONFIGURATION
TWO13SIM
CONTACTOR
TIMER
CONFIGURATION
FOR
OUTPUT CONFIGURATION:
SIM
CIRCUIT
AND
4TWO CONTACTOR
OUTPUT CONFIGURATION: SIM
- CIRCUIT
3 AND 4
OUTPUT CONFIGURATION:
PUL - CIRCUIT
2 1 AND 2
OUTPUT CONFIGURATION:
PUL1- AND
CIRCUIT
OUTPUT CONFIGURATION:
PUL - CIRCUIT
4 3 AND 4
OUTPUT CONFIGURATION:
PUL3- AND
CIRCUIT
TIMER
CIRCUIT 1 CIRCUIT
CIRCUIT
CIRCUIT
CIRCUIT
1 2 CIRCUIT
2 3 CIRCUIT
3 4 CIRCUIT 4
POWER
TIMER
CIRCUIT 1
CIRCUIT 2
CIRCUIT 3
CIRCUIT 4
POWER
CUIT 4
LOAD 1
L2
L6
L1
L1
L2/N
L2/N
LOAD 1
OPEN
COM
N
L3
N
L4
N
L5
N
TIMER CONFIGURATION
FOR TWO 208/240
VAC208/240
DPST VAC DPST
TIMER
CONFIGURATION
FOR
TWO
TIMER
CONFIGURATION
FOR TWO
CONTACTOR
CONTROLS
4 CONFIGURATION:
- INDIVIDUAL
VAC
LOADS
OUTPUT CONFIGURATION:
SIM -120/277
CIRCUIT
1 -AND
OUTPUT
CONFIGURATION:
CIRCUIT
OUTPUT
PUL -SIM
CIRCUIT
12AND 21 AND 2
OUTPUT CONFIGURATION:
SIM - CIRCUIT
3- -CIRCUIT
AND
OUTPUT
CONFIGURATION:
CIRCUIT
AND2 4
OUTPUT
CONFIGURATION:
PULIND
-SIM
CIRCUIT
34AND143AND
OUTPUT
CONFIGURATION:
OUTPUT CONFIGURATION: IND - CIRCUIT 3 AND 4
ST
L2/N
L2
L1
L1
COM
OPEN
CLOSE
COM
L2
OPEN
2
LOAD
1 1 LOAD 1 LOAD 2 LOADLOAD
LOAD
3LOAD 2 LOAD 4
COM
L2
L1
L2/N
L2/N
ACLOAD
IN 1 NO-1 COM1 NO-2 COM2 NO-3 COM3 NO-4 COM4
AC ININ NO-1
NO-1
COM1
NO-2
COM2
NO-4 LCOM4
COM2
AC
COM1
NO-2
NO-3 NO-3
COM3 COM3
NO-4
N COM4
NO-1 COM1 NO-2 COM2 NO-3 COM3 NO-4 COM4
AC
NO-1
NO-2
COM2
NO-3
COM3
NO-4
COM4
ACININ AC
NO-1
COM1
NO-2
COM2
NO-3
COM3
NO-4
COM4
IN COM1
NO-1
COM1
NO-2
COM2
NO-3
COM3
NO-4 COM4
L1
L1
L1
L1
L1
CLOSE
L1
AC IN
NO-1
COM1
NO-2
COM2
NO-3
COM3
NO-4
COM4
AC
NO-1
COM1
NO-2
COM2
COM3
NO-4
AC
ININ
NO-1
COM1
NO-2
COM2
NO-3NO-3
COM3
NO-4
COM4
COM2
ACIN
NO-1
COM1
NO-2
NO-3
COM3
NO-4 COM4
COM4
CLOSE
AC IN
NO-4 COM4
AC IN TIME
NO-1 COM1 NC-
TIMER
CIRCUIT 1
CIRCUIT 2
CIRCUIT 3
CIRCUIT 4
POWER
NO-1 COM1 NO-2 COM2 NO-3 COM3 NO-4 COM4
AC IN
NO-1 COM1 NO-2 COM2 NO-3 COM3 NO-4 COM4
AC IN
COM4
L1
OUTPUT CONFIGURATION: IND - CIRCUIT 3 AND 4
TIMER
POWER
L1
NO-1 COM1 NC-1
L2/N
TIMER CONFIGURATION FOR 240 VAC DPST
OUTPUT CONFIGURATION: SIM
LOAD 1TO TIMER
LOAD
2 LOAD
LOAD
3 LOAD
LOAD
4 LOAD 4
L1
POWER
OUTPUT CONFIGURATION: SIM
LOAD
1
2
3
TIMER
CONFIGURATION
FOR
CONTACTOR
CONTROL
POWER TO TIMER
POWER
TO TIMER
OUTPUT
CONFIGURATION:
PUL
POWER TO TIMER
Note:
120/208/240/277
VAC
L2/N
CONFIGURATION:
PUL
IND=OUTPUT
IndependentSIM=
PUL=
120/208/240/277
VAC
TIMER CONFIGURATION
FOR CONTACTOR CONTROL
(AUTO
VOLTAGE,NSimultaneous
NO JUMPERS
L3120/208/240/277
N L3 L4 VAC
N L4Pulse
L5 N N L5 L6 N
120/208/240/277
VAC
N REQUIRED)
N REQUIRED)
L6
LOAD 1 NO JUMPERS
LOAD 2REQUIRED)
LOAD
3
LOAD 4
(AUTO VOLTAGE,
(AUTO VOLTAGE,
NO JUMPERS
(AUTO VOLTAGE,
NO JUMPERS
REQUIRED)
OUTPUT
CONFIGURATION:
PUL
4 - INDIVIDUAL
120/277 VAC
LOADSVAC LOADS
4 - INDIVIDUAL
120/277
N
L3
N
L4
N
L5
N
L6
OUTPUT CONFIGURATION:
IND - CIRCUIT
2 1 AND 2
OUTPUT CONFIGURATION:
IND1- AND
CIRCUIT
4 - INDIVIDUAL 120/277 VAC LOADS
OUTPUT CONFIGURATION:
IND - CIRCUIT
4 3 AND 4
OUTPUT CONFIGURATION:
IND3- AND
CIRCUIT
TIMER
OUTPUT CONFIGURATION: IND - CIRCUIT 1 AND 2
POWER
L2/N
COM2
AC INTIMER
NO-1
COM1
NO-2 FOR
CONFIGURATION
240NO-3
VAC COM3
DPST NO-4 COM4
L2/N
L1
OPEN
AC IN
LOAD
1
L2
AC IN
TIMER
L2/N
LOAD 1
AC IN
L2/N
CLOSE
AC IN
L1 L2/N
L2
LOAD 1
L1
TIMER CONFIGURATION FOR AC
240 IN
VAC DPST
OUTPUT CONFIGURATION:
SIM
L1
CIRCUIT
2 on theL1
120/208/240/277 VAC
LOAD1
LOAD
There
ways
to set1 theCIRCUIT
relays
TIMERare many
L2/N
CIRCUITdifferent
1 POWER
CIRCUIT
2
(AUTO VOLTAGE, NO JUMPERS REQUIRED)
POWER
L2/N
LOAD1
LOAD2
ET2800 Series Time Switch. The four relays can be used
TIMER
L2/N
OUTPUT
CIRCUIT
CIRCUIT 2
CIRCUIT 3
CIRCUIT 4
TIMERor inTIMER
TIMER 1 CIRCUIT
POWER
individually
pairs.
to1the2 CIRCUIT
table
below
for
a 3 4 CIRCUIT 4
CONFIGURATION
- SPDT
CIRCUIT
1Refer
CIRCUIT
CIRCUIT
CIRCUIT
TIMER
POWER
1
CIRCUIT 2OUTPUT
CIRCUIT
3
CIRCUIT
4
CIRCUIT
2 3 CIRCUIT
POWER
POWER
POWER
OUTPUT CONFIGURATION - SPDT
complete list ofPOWER
waysACtoINsetTIMER
the
relays
and
the
illustrations
NO-1 COM1 NO-2 COM2
COM2
AC
IN
NO-1
COM1
NO-2
2 CIRCUIT M
for some of theL1common wiring installations
COM
O-1 COM1 NO-2 COM2
LOAD 1
TIMER
POWER
LOAD 1
L2CIRCUIT 1
OUTPUT CONFIGURATION: PUL (BELL RINGING)
OUTPUT CONFIGURATION: PUL (BELL RINGING)
AC IN
NO-1 COM1 NO-2 COM2
NO-1 COM1 NO-2 COM2
L1 NO-1
CIRCUIT 1AC IN
CIRCUIT
2
CIRCUIT
3
CIRCUIT
COM24
COM1 NO-2
TIMER
POWER
LOAD 1
TIMER POWER
TIMER POWER
TIMER
POWER
L1
L2/N
L2/N
L1
TIMER
POWER1
CIRCUIT
L2/N
TIMER POWER
OPEN
COM
LOAD 2
CIRCUIT 2
NO-1 COM1 NO-2 COM2
L1
L1
OUT
COM
LOAD 1
LOAD 2
OUTPUT CONFIGURATION: PUL (BELL RINGING)
TIMER
CIRCUIT 1
CIRCUIT 2
CIRCUIT 1 POWER
CIRCUIT 2
TIMER
CIRCUIT 1
CIRCUIT 2
POWER
AC IN
L4
CLOSE
LOAD 1
TIMER
POWER
CIRCUIT 2
N
CIRCUIT 1
AC IN
AC IN
NO-1 COM1 NO-2 COM2
NO-1 COM1 NO-2 COM2
L1
N
L3
N
L4
N
L3
N
L4
OUTPUT CONFIGURATION: IND
OUTPUT CONFIGURATION:LOAD
IND 1
L4
NFIGURATION: IND
IRCUIT 1
NO-1 COM1 NO-2 COM2
L2/N
TIMER
POWER
CIRCUIT 2
OPEN
L1
L2/N
N
AC IN
L1
AC IN
LOAD 2
L3
CIRCUIT 2
TIMER
CIRCUIT 1
POWER
CIRCUIT 2
CIRCUIT 1
COM
D1
TIMER
POWER
AC IN
NO-1 COM1 NO-2 COM2
NO-1 COM1 NO-2 COM2
AC IN
L2/N
CIRCUIT 1
CIRCUIT 2
CLOSE
TIMER
POWER
L1
O-1 COM1 NO-2 COM2
TIMER
CIRCUIT 1
POWER
CIRCUIT 2
CIRCUIT 1
OPEN
CIRCUIT 2
L3
OUTPUT CONFIGURATION: IND
CLOSE
IRCUIT 1
L2/N
LOAD 2
N
2 Circuit SPST
TIMER
POWER
NO-1 COM1 NO-2 COM2
AC IN
L1
LOAD 2
4 CIRCUIT
MODELS
4 CIRCUIT
MODELS
300ET10063
4 CIRCUIT
MODELS
4 CIRCUIT
MODELS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement