Amprobe FLASH-80 Industrial Mini Flashlight User manual

Amprobe FLASH-80 Industrial Mini Flashlight User manual
UNPACKING AND INSPECTION
Your shipping carton should include:
FLASH-80
Industrial Mini-Flashlight
1
1.LED
2.Battery Room
3.Battery Room Cap
4.Pocket Clip
5.ON/OFF Switch
6.Hand strap hole
1
Flashlight
1
AA battery
1
Hand strap
1
Users Manual
If any of the items are damaged or missing,
return the complete package to the place of
purchase for an exchange.
INTRODUCTION
The flashlight FLASH-80 is a portable electric
spotlight, the whole body is made of metal; it
can be used in most of worst condition.
Features
• Osram Golden Dragon Plus LED
2
• Maximum light output: Up to 80 lumens
• Continuous run time: Up to 1.6 hours
4
• Powered by two AA alkaline battery
• Compatible to AA Ni-MH rechargeable
battery
3
6
5
• Precise design, optical pre-focused
collimator lens
• Push-button tail cap switch
• Momentary ON/OFF function
SYMBOLS
�
Caution ! Refer to the explanation
in this Manual
=
Do not dispose of this product as
unsorted municipal waste. Contact
a qualified recycler for disposal.
• Steel pocket clip
• Product size: 100.8(H) x 27.9(W)mm
(4.0(H) x 1.1(W) inch)
OPERATION
�WARNING and PRECAUTIONS
1. Unscrew the end cap and install AA battery into battery room
• Do not look at the LED light directly
2. Screw on the end cap
• Do not allow children to use the LED
3. Push ON/OFF button; and turn on flashlight
light alone
• Flashlight surface maybe hot after
using
Limited Warranty and Limitation of Liability
Your Amprobe product will be free from
defects in material and workmanship for 1
year from the date of purchase. This warranty
does not cover disposable batteries or damage
from accident, neglect, misuse, alteration,
contamination, or abnormal conditions of
operation or handling. Amprobe’s warranty
obligation is limited, at Amprobe’s option, to
refund of the purchase price, free of charge
repair, or replacement of a defective product.
To obtain service during the warranty period,
return the product with proof of purchase
to an authorized Amprobe Test Tools Service
Center or to an Amprobe dealer or distributor.
This warranty is your only remedy. All other
warranties - whether express, implied or
statutory - including implied warranties
of fitness for a particular purpose or
merchantability, are hereby excluded. Neither
Amprobe nor its parent company or affiliates
shall be liable for any special, indirect,
incidental or consequential damages or losses,
arising from any cause or theory. Since some
states or countries do not allow the exclusion
or limitation of an implied warranty or of
incidental or consequential damages, this
limitation of liability may not apply to you.
Repair
All test tools returned for warranty or nonwarranty repair or for calibration should be
accompanied by the following: your name,
company’s name, address, telephone number,
and proof of purchase. Additionally, please
include a brief description of the problem
or the service requested and include the test
leads with the meter. Non-warranty repair
or replacement charges should be remitted
in the form of a check, a money order, credit
card with expiration date, or a purchase order
made payable to Amprobe® Test Tools.
In-Warranty Repairs and Replacement –
All Countries
Please read the warranty statement and check
your battery before requesting repair. During
the warranty period any defective test tool
can be returned to your Amprobe® Test Tools
distributor for an exchange for the same or
like product. Please check the “Where to
Buy” section on www.amprobe.com for a list
of distributors near you. Additionally, in
the United States and Canada In-Warranty
repair and replacement units can also be
sent to a Amprobe® Test Tools Service
Center (see address below).
Non-Warranty Repairs and Replacement –
US and Canada
Non-warranty repairs in the United
States and Canada should be sent to a
Amprobe® Test Tools Service Center. Call
Amprobe® Test Tools or inquire at your
point of purchase for current repair and
replacement rates.
In USA
Amprobe Test Tools
Everett, WA 98203
Tel: 877-AMPROBE (267-7623)
In Canada
Amprobe Test Tools
Mississauga, ON L4Z 1X9
Tel: 905-890-7600
Non-Warranty Repairs and Replacement
– Europe
European non-warranty units can be
replaced by your Amprobe® Test Tools
distributor for a nominalv charge. Please
check the “Where to Buy” section on
www.amprobe.com for a list of distributors
near you.
European Correspondence Address*
Amprobe® Test Tools Europe
In den Engematten 14
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
*(Correspondence only – no repair or
replacement available from this address.
European customers please contact your
distributor.)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement