advertisement
MAINTENANCE RELEASE/V000/08-98 v
Contents
1
Installing the Maintenance Release
..........................................................
Uninstalling the Current MultiPASS Software ..................................................
Removing the Printer Driver ......................................................................
Removing the Desktop Manager ................................................................
Removing Other Software ...........................................................................
Installing the Maintenance Release Software ...................................................
MultiPASS C3000 Users ..............................................................................
MultiPASS C5000 Users ..............................................................................
2
MultiPASS Desktop Manager Update
.......................................................
Updated Desktop Manager Features .................................................................
Viewing Documents in the Desktop Manager .................................................
Selecting Documents in Document View ..................................................
Working With Documents in the Desktop Manager .......................................
Printing a Document in the Desktop Manager .........................................
Working With Jobs in the Out Box Folder ................................................
Deleting a Document or Folder ..................................................................
Restoring a Deleted Document ..................................................................
Manipulating a Document in Document View ...............................................
Arranging the Documents in Document View ..........................................
Scrolling Through a Multi-page Document ..............................................
Removing a Page From a Document ..........................................................
iii
MAINTENANCE RELEASE/V000/08-98
Advanced: Receive Fax Options ..................................................................
iv
MAINTENANCE RELEASE/V000/08-98
MAINTENANCE RELEASE/V000/08-98 v
Installing the Maintenance Release 1
Before you begin installing the maintenance release, you must first uninstall your current MultiPASS™ installation. Once you complete the uninstallation, installing the maintenance release is very similar to the original installation process.
Preparing for the Uninstallation
Before you uninstall the current version of your MultiPASS software, decide what data, if any, you want to preserve.
Important! The uninstallation process removes all documents and all
Address Book entries from the Desktop Manager. Be sure to export any documents you want to use again and your Address Book as described below.
❍ Set up a temporary directory to store the data you want to save.
❍ In the Desktop Manager, export any desired documents to .TIF
format. Store them in your temporary directory.
❍ In the Desktop Manager, open your Address Book and export it to the temporary directory. Remember that you cannot export your group addresses, so be prepared to reenter them.
The addresses and comments from your Address Book cannot be imported, so be prepared to reenter them.
❍ Custom cover pages cannot be exported, so be prepared to re-create them.
❍ User-defined folders in the Desktop Manager cannot be exported, so be prepared to re-create them.
❍ You may want to access your setup information, in order to take note of your preferred settings. You can reenter them after installing the maintenance release.
MultiPASS Desktop Manager Update 1
MAINTENANCE RELEASE/V000/08-98
Uninstalling the Current MultiPASS Software
After exporting any files you want to keep, you must uninstall the current installation of your MultiPASS software.
MultiPASS C3000 Users
You will need to uninstall the printer driver and the Desktop Manager.
MultiPASS C5000 Users
You will need to uninstall the printer driver, the Desktop Manager,
ScanGear™, and the Pagis™ software.
MultiPASS L6000 Users
You will need to uninstall the printer driver, the Desktop Manager, and
ScanGear.
The instructions in the following subsections describe the procedures for the MultiPASS C5000 and Windows ® 98/95. If you have a MultiPASS
C3000 or MultiPASS L6000, or if you are using Windows 3.1, follow the procedures below but see your User’s Manual for instructions specific to your product. The uninstall procedures are described in Chapter 8,
Setup and Other Utilities in the Desktop Manager, in your User’s
Manual.
Removing the Printer Driver
1. On the Windows desktop, click Start, and then point to Settings.
2. On the Settings menu, click Printers.
3. In the Printers dialog box, click the Canon MultiPASS C5000
Printer icon and press the
Delete key.
Repeat this step for the Canon MultiPASS C5000 Fax icon.
2 MultiPASS Desktop Manager Update
MAINTENANCE RELEASE/V000/08-98
Removing the Desktop Manager
1. Close the MultiPASS Desktop Manager and all MultiPASS-related utilities (such as the Cover Page Designer).
2. Close the MultiPASS Background.
3. On the Windows desktop, click Start, and then point to Programs.
4. From the Programs menu, point to Canon MultiPASS C5000, and then click MultiPASS Uninstaller.
5. Follow the on-screen instructions.
When the uninstall is complete, be sure to delete the MPASS directory.
N
Removing Other Software
MultiPASS C5000 users must uninstall both ScanGear and Pagis.
MultiPASS L6000 users must uninstall ScanGear. If these programs are not uninstalled, the Maintenance Release will not load.
Use Add/Remove Program to remove ScanGear and Pagis.
Preparing for the Installation
You can prepare the maintenance release fax setup information using your original settings. Be aware of the new names assigned to these fax setup features:
❍ Fax Heading/Unit Name
This information was previously labeled Fax Heading.
❍ Company (for Cover Page)
This information was previously labeled Company.
N Be sure to restart your computer after uninstalling the Desktop Manager and before reinstalling.
MultiPASS Desktop Manager Update 3
MAINTENANCE RELEASE/V000/08-98
Installing the Maintenance Release Software
Before you begin, close any programs that are open.
N
The following procedures describe how to install the Maintenance
Release software from a CD. If you are installing from diskettes, please insert the appropriate diskette into your diskette drive and type a: instead of d: in the following instructions (where a: identifies your diskette drive).
MultiPASS C3000 Users
1. Insert the Maintenance Release CD into your CD drive.
2. From the Windows taskbar, click Start, Settings, and Printers. Now, double-click the Add Printer icon.
3. When you see the Add Printer Wizard screen, click Next. Select
Local Printer and click Next. Now, click the Have Disk button.
4. In the Install From Disk dialog box, type d:\mpc3000\winbj\ disk1 (where d: is your CD driver; most CD drives are d: or e: ) and click OK.
5. When you see the Canon MultiPASS C3000 Printer highlighted in the Add Printer Wizard screen, click Next.
6. Make sure the MultiPASS is connected to the LPT port selected here
(such as LPT1) and click Next.
7. On the next Add Printer Wizard screen, you can change the printer name or leave it as Canon MultiPASS C3000 Printer. You can also specify whether or not you want the MultiPASS C3000 to be your default printer. Now click Finish.
8. When you see the Insert Disk dialog box, click OK.
4 MultiPASS Desktop Manager Update
MAINTENANCE RELEASE/V000/08-98
9. In the Copying Files dialog box, type d:\mpc3000\winbj\ disk2 (where d: is your CD driver; most CD drives are d: or e: ) and click OK.
10. When you see the Setup screen that asks you to insert Disk 1 of the
MultiPASS Desktop Manager, type d:\mpc3000\mpassdtm\ disk1\setup.exe
(where d: is your CD driver; most CD drives are d: or e: ) and click OK.
11. Follow the on-screen instructions to complete installation of the
MultiPASS Desktop Manager.
MultiPASS C5000 Users
1. Start Windows. If you see a "New Hardware Found", "Update Device
Driver Wizard", or "New Hardware Wizard" screen, click Cancel.
(Click whatever you need to until you return to the Windows
Desktop.)
2. Insert the Maintenance Release installation CD into your CD drive.
3. From the Windows taskbar, click Start and then Run.
4. In the Run dialog box, type d:\mpc5000\setup.exe
(where d: is your CD driver, most CD drives are d: or e: ) and click OK.
5. Follow the on-screen instructions.
MultiPASS L6000 Users
1. Start Windows. If you see a "New Hardware Found", "Update Device
Driver Wizard", or "New Hardware Wizard" screen, click Cancel.
(Click whatever you need to until you return to the Windows
Desktop.)
2. Insert the Maintenance Release installation CD into your CD drive.
3. From the Windows taskbar, click Start and then Run.
4. In the Run dialog box, type d:\mpl6000\setup.exe
(where d: is your CD driver; most CD drives are d: or e: ) and click OK.
5. Follow the on-screen instructions.
MultiPASS Desktop Manager Update 5
MAINTENANCE RELEASE/V000/08-98
Following the Installation
After you have completed the installation of the maintenance release software, you can import and reenter your saved data.
1. In the Desktop Manager, re-create any user-defined folders.
2. In the Desktop Manager, import any desired documents.
N You can import .TIF files to your In Box or to any user-defined folders.
Be sure to create any user-defined folders you may want to use before you start to import your .TIF files.
3. In Setup Options, reenter any preferred settings.
4. In the Desktop Manager, import your Address Book.
When you import your Address Book, you import all of your
Address Book information, except the addresses and comments.
Therefore, because the addresses and comments cannot be imported, an error message appears. Click OK to close the message box, then reenter the information at your leisure.
5. In the Cover Page Designer, re-create any custom cover pages.
Windows 98 Users
If you are a Windows 98 user and if you see PLEASE WAIT on your LCD everytime you boot up your computer, please do the following:
1. Click Start, point to Find, and then click Files Or Folders.
2. In the Named box, type drvwppqt.vxd
and then click Find Now.
3. Rename all instances of the file by changing the file name extension.
You must change the extension to prevent the driver from being loaded.
Do not implement this resolution if you have a tape backup device connected to a parallel (LPT) port on your computer.
N
6 MultiPASS Desktop Manager Update
MAINTENANCE RELEASE/V000/08-98
MultiPASS Desktop Manager Update 2
This section is a supplement to your existing user documentation for the
Canon MultiPASS C3000 or MultiPASS C5000 and accompanying
MultiPASS Desktop Manager for Windows software.
Several features have been updated or added to increase the productivity and efficiency of your MultiPASS. This guide provides an explanation of these features.
MultiPASS L6000 users can refer to their existing User’s Manual.
Updated Desktop Manager Features
This section provides an overview of the additions to the MultiPASS
Desktop Manager screen. Detailed instructions for using the various commands and components of the screen are provided in later sections.
MAINTENANCE RELEASE/V000/08-98
MultiPASS Desktop Manager Update 7
❍ The Desktop Manager Window
The Desktop Manager window now has an Origin column. The information displayed in this column refers to the original form of the document listed. The Origin column is available only in List
View.
The Origin column is available in all Desktop Manager folders
(whether system- or user-defined) when viewed in List View.
❍ Standard Toolbar
The standard toolbar provides you quick access to performing certain new Desktop Manager tasks.
The updated standard toolbar includes the following new buttons:
DOCUMENT
VIEW
LIST VIEW REMOVE
TOP PAGE
SPLIT MERGE
❍ Work Area
The work area appears to the right of the folders list and displays the documents within the open folder. The documents are displayed either as a graphic thumbnail of each document or as a list of the documents.
Viewing Documents in the Desktop Manager
When you open a folder, you can view the documents contained within the folder. With the exception of the Out Box folder, you can choose to display the documents in Document View or List View.
When you first open the Desktop Manager, the documents are displayed in Document View. However, you can change to List View at any time.
If the number of documents within a folder exceeds the available work area, horizontal and/or vertical scroll bars appear. You can then scroll the work area to view your documents.
To open a folder, simply click the desired folder in the folders list.
8 MultiPASS Desktop Manager Update
MAINTENANCE RELEASE/V000/08-98
Document View
Document View presents each individual document as a thumbnail of the document. Each document thumbnail displays the document name at the top. For multiple page documents, the thumbnail also displays the page count and scroll arrows at the bottom, and a scroll box at the right side. The scroll arrows and scroll box enable you to page through a multi-page document, displaying each page in turn or moving you to a particular page in the document.
Document View enables you to work with an individual document at the page level: scrolling through the pages, removing a page, splitting a document, or merging two or more documents into a single document.
You can rearrange the document thumbnails within the work area as needed.
Document View is available only for the In Box, Scan, Sent Fax, and
Trash folders, and any user-defined folders you create. You cannot use
Document View for the Out Box folder.
❍ To view documents in a folder as thumbnails, make sure the folder is open. Then click Document View on the View menu or toolbar.
List View
List View presents the documents within the open folder as a list. Each document on the list displays an icon representing the document type, along with other pertinent information about the document (such as the name, page count, disk storage size, and date and time of creation).
MultiPASS Desktop Manager Update 9
MAINTENANCE RELEASE/V000/08-98
The icon designates the document type as fax, scan, or modified. A modified document is a document where the fax cover page has been removed from a fax, a scan that has been annotated, or a multi-page document that has been split into multiple documents.
List View is available for all folders, both system- and user-defined.
When you display documents using List View, the documents cannot be manipulated at the page level (as in Document View), such as splitting a document or merging two or more documents.
❍ To view the documents in a folder as a list, make sure the folder is open. Then click List View on the View menu or toolbar.
Selecting Documents in Document View
To work with a document, you select it in the open folder, while in either
Document View or List View. If you are in Document View, generally you can select one or more documents at a time for whatever task you need to perform.
To select a document in Document View, make sure the folder is open.
Then do one of the following:
❍ For a single document, click the document thumbnail.
❍ For multiple nonsequential documents, hold the
Ctrl key while clicking on each document you want to select.
10 MultiPASS Desktop Manager Update
MAINTENANCE RELEASE/V000/08-98
Working With Documents in the
Desktop Manager
The maintenance release software allows you to perform many new tasks in the Desktop Manager.
Printing a Document in the Desktop Manager
You can print a document in either Document View or List View from any folder in the Desktop Manager (except the Trash folder).
N
In the revised Print dialog box, you can specify the Print Range and
Print Quality, and then click OK.
The Copies option is not available when printing from the Desktop
Manager.
MultiPASS Desktop Manager Update 11
MAINTENANCE RELEASE/V000/08-98
Working With Jobs in the Out Box Folder
While in the Out Box, you can now view a PC fax that has been stopped, held, or has failed. New columns have also been added to give you more detailed descriptions of jobs in the Out Box.
Moving a Document
You can move a document from:
❍ A system-defined folder (except the Out Box folder) to a userdefined folder.
❍ A system-defined folder (except the Out Box folder) or user-defined folder to the Trash folder.
❍ One user-defined folder to another user-defined folder.
You cannot move a document into a system-defined folder other than the Trash folder.
12 MultiPASS Desktop Manager Update
MAINTENANCE RELEASE/V000/08-98
To move a document:
1. O pen the folder containing the document you want to move.
2. Drag the document to the desired folder.
In Document View, the document is placed in the first available grid space. In List View, it is placed in the appropriate sort order.
Copying a Document
A document can be copied within the same user-defined folder, or from one folder to a different (user-defined) folder. When you copy a document within the same folder, the copy is assigned a unique name.
To copy a document within the same user-defined folder:
1. Open the folder with the document you want to copy.
2. Select the document and, on the Edit menu, click Duplicate.
To copy a document from one folder to another:
1. Open the folder with the document you want to copy.
2. Drag the document, while holding down the Ctrl key, to the desired folder.
Deleting a Document or Folder
When you delete a document, it moves to the Trash folder. To delete a document permanently, you must empty the Trash folder.
When you delete a folder, it is removed from the Desktop Manager window immediately and permanently deleted.
To delete a document:
1. Open the folder with the document you want to delete and click the document.
2. Then, on the Edit menu, click Delete (or press the Del key).
MultiPASS Desktop Manager Update 13
MAINTENANCE RELEASE/V000/08-98
To delete a folder:
1. Delete all documents from the folder you want to delete.
2. After you have deleted all the documents in the folder, click the folder. Then, on the Edit menu, click Delete.
Restoring a Deleted Document
If a document is in the Trash folder, you can restore it to its original folder. If the original folder contains another document of the same name, a dialog box appears, giving you the option of replacing the document.
To restore a deleted document:
1. In the Desktop Manager, click the Trash folder.
2. In the Trash folder, click the document you want to restore.
3. On the File menu, click Restore.
Documents that have been deleted from the Trash folder cannot be restored.
Exporting a Document
You can export a document in the Desktop Manager, saving it to a drive and directory you specify. When you export a document, you save a copy of the original document. The document you export can be in monochrome TIFF file format only.
Manipulating a Document in Document View
If you are using Document View, you can manipulate the documents in the open folder in a variety of ways. (The only exception is the Out Box folder.) You can arrange the documents in a preferred order. You can also remove a page from a document, split a single document, or merge one document with another.
14 MultiPASS Desktop Manager Update
MAINTENANCE RELEASE/V000/08-98
Arranging the Documents in Document View
A document thumbnail in Document View retains its position until you rearrange it. You can arrange one or more documents manually or automatically by clicking a command.
When you arrange the documents automatically, the documents are positioned within a grid, with row positions filling from left to right.
❍ To arrange documents manually:
With the desired folder open, select one or more documents and drag them to a different location within the work area.
❍ To arrange documents automatically:
With the desired folder open, click Arrange on the View menu.
Scrolling Through a Multi-page Document
You scroll through a multiple-page document to position yourself at the page that you want to remove from the document or where you want to split the document.
As you scroll the pages in the document, the current page number for the document updates instantly. After scrolling, the top page is retained even if the folder is closed and reopened.
To scroll the pages in a document, do one of the following:
❍ Click the left and right scroll arrows displayed with the page numbers for the document.
❍ Drag the scroll tab on the right side of the document.
MultiPASS Desktop Manager Update 15
MAINTENANCE RELEASE/V000/08-98
Removing a Page From a Document
You can remove the current top page of a document. For example, you may want to remove the cover page from a received fax.
1. Scroll through the document until the page you want to remove is on top.
2. Click Remove Page on the Edit menu or toolbar.
Splitting a Document
You can split a document into two documents. You can split a document from any page after the first page within the document.
In other words, you cannot split a document on page 1 of the document nor can you split a single-page document. For example, you split a 10-page document, beginning at page 5. The original document consists of pages 1 through 4. The newly created document consists of pages 5 through 10.
The original document—consisting of at least the first page, up to the page where the split occurred—retains the original name. The newly created document is assigned a unique name.
Merging a Document
You merge two documents to combine them into a single document.
The documents are merged in the order you select them. In other words, the first document selected becomes the top pages of the second document selected. Both documents are merged into the second document.
To merge two or more documents:
1. Select the two documents you want to merge (by holding the Ctrl key and clicking each document).
2. Click Merge on the Edit menu or toolbar.
16 MultiPASS Desktop Manager Update
MAINTENANCE RELEASE/V000/08-98
Updated Setup Options
The Desktop Manager contains setup options that define the operation of your MultiPASS C5000 or MultiPASS C3000. Some of the options have been updated and the appearance of the tabs or windows may have changed.
Preferences
For the MultiPASS C3000, the Printing option on the Preferences tab has been removed.
Send Fax Options
The following changes have been made to the Send Fax tab.
❍ The Fax Heading option is now labeled Fax Heading/Unit Name.
❍ The Company option is now labeled Company (for Cover Page).
Receive Fax Options
The following options on the Receive Fax tab have been updated.
MAINTENANCE RELEASE/V000/08-98
MultiPASS Desktop Manager Update 17
❍ Paper Size
You select the size of the paper you are using for printing a fax.
❍ Answer Receive Mode
You select the mode by which you want the MultiPASS to receive incoming calls:
• Automatically switch for receiving a call either as a fax or telephone call
• Automatically receive only fax calls
• Require you to manually answer the incoming call and then set the MultiPASS for an incoming fax
• Automatically receive a call with your answering machine
• Automatically switch between receiving a call either as a fax or telephone call based on the ring tone for each type of call. (U.S.
only. This setting is applicable only if you subscribe to a special network service with your phone company that defines multiple ring tones for your phone line.)
❍ Answer Silent Receive
You select this option to set the MultiPASS to not ring for an incoming fax.
❍ Receive Conditions
You specify how the system should handle an incoming fax under the following conditions:
• If your computer is turned off
You set the MultiPASS to print the fax or save the fax in its memory.
• If your computer is turned on
You set the MultiPASS to move the fax to the Desktop Manager on your computer, or to print the fax.
18 MultiPASS Desktop Manager Update
MAINTENANCE RELEASE/V000/08-98
Advanced: Receive Fax Options
The following change has been made to the Advanced: Receive Fax options—the feature formerly labeled Ink Saver is labeled now
Ink/Toner Saver.
❍ Ink/Toner Saver
You select this option if you want to print documents in the Desktop
Manager using a reduced amount of ink or toner, thereby saving printer ink or toner. When using this option, the printed document may appear to be less bright or contrasted.
MAINTENANCE RELEASE/V000/08-98
MultiPASS Desktop Manager Update 19
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Frequently Answers and Questions
What is the maximum scanning resolution of the Canon CFX-L3500 IF?
How many pages per minute can the Canon CFX-L3500 IF scan?
What is the maximum document size that the Canon CFX-L3500 IF can scan?
What file formats does the Canon CFX-L3500 IF support?
Does the Canon CFX-L3500 IF have a document feeder?
advertisement