Canon | PIXMA iP1600 | Instruction Guide | Canon PIXMA iP1600 Instruction Guide

Start Here
Series
Photo Printer
Easy Setup Instructions
1
2
Unpack the Printer
1 Carefully remove all items from the box.
3
Prepare the Printer
1 Remove the tapes from the printer as shown.
Install the FINE Cartridges
1 Open the Front Cover. The FINE Cartridge Holder automatical-
The tape position is subject to change.
6 Push up the FINE Cartridge until it clicks into place.
ly moves to the left.
IMPORTANT: For correct printer operation, make sure the FINE
Cartridge is secure in slots.
Tapes
Serial Number
PIXMA iP1600 Photo Printer
2 Open the Paper Support and the Front Cover, then remove
the Protective Material on the right side.
2 Write down the serial number. You will need this to register
the product.
3 Remove the Color FINE Cartridge (CL-41) from its box.
7
Repeat the procedure for the Black FINE Cartridge (PG-40),
inserting it into the left slot (B).
8
Close the Front Cover.
Power Cord
Protective Material
3 Plug the Power Cord into the back of the printer and connect
FINE Cartridges
PG-40
CL-41
the other end to a power outlet.
4
Remove the Protective Tape gently.
Power Cord
Photo Printer
Electrical Contacts
Series
Quick Start Guide
To the FINE Cartridge Holder
Protective Tape
Print Head Nozzles
Documentation and Software Kit
NOTE: Do NOT connect the USB cable at this stage.
4 TURN THE PRINTER ON. The printer will initialize. Wait until
the POWER lamp remains fully lit.
NOTE:
·Do not touch the electrical contacts or Print Head Nozzles on
a FINE Cartridge. The printer may not print out properly if you
touch it.
·Do not reattach the Protective Tape once you have removed it.
·Handle the removed Protective Tape carefully to avoid getting
your hands dirty or staining surrounding work area.
NOTE: The printer will perform a Print Head Cleaning after the
cover is closed. Wait until the process is complete before proceeding.
5 Insert the Color FINE Cartridge slightly slanted into the right
slot (C).
Continue with Step 4
on side two.
4
4
Windows® Printer Driver Installation
Macintosh® Printer Driver Installation
sh
to
n
i
c
Ma
s
ow
d
n
Wi
1 TURN THE PRINTER OFF.
7 When the Printer Connection window appears, connect the USB
cable to the computer and the other end to the printer.
2 Turn the computer on and start Windows.
NOTE:
·Before installing the driver, disable all anti-virus programs
and automatically loading programs.
·For Windows XP or Windows 2000, log on to Windows as a
member of the Administrators group before continuing.
·Do not switch users during the installation process.
NOTE:
·The screens below refer to Mac ® OS X v.10.3.x installation.
Screens may differ depending on the operating system you are
using.
·Before installing the driver, disable all anti-virus programs and
automatically loading programs.
·Do not remove or insert the USB cable during installation, as this
may result in the computer or printer not operating normally.
7 When the Easy Install screen appears, click Install.
1 Connect the end of the USB cable to the computer, the other to
the printer.
IMPORTANT: If you see the Found New Hardware Wizard,
click Cancel.
NOTE: Move the cursor over items to display explanations of
each application below.
8 Read the License Agreement, then click Yes to continue.
8 TURN THE PRINTER ON.
Installation of the printer driver, On-screen Manuals, and
application softwares will begin. Follow the on-screen
instructions.
IMPORTANT: If you cannot proceed to the next procedure after
two minuets, refer to “Troubleshooting” instructions in the Quick
Start Guide.
9 Follow the on-screen instructions to register your product.
9 Follow the on-screen instructions to install the remaining soft3 Insert the Setup Software & User's Guide CD-ROM.
ware. When the Installation Results window appears, click
Next.
The setup program should run automatically.
10 When the Installation completed successfully screen
2 Turn on your Mac.
appears, click Restart.
3 Insert the Setup Software & User's Guide CD-ROM.
NOTE: If the CD-ROM folder does not open automatically,
double-click the CD-ROM icon on the desktop.
4 When the main menu appears, click Easy Install and follow
the on-screen instructions.
4 Double-click the Setup icon.
11 After restarting the computer, start Printer Setup Utility
NOTE: When the Print Head Alignment Recommended window
appears, click Next.
10 Follow the on-screen instructions to register your product.
5 When the Authenticate screen appears, enter your administra-
NOTE: There are two types of the printer driver installations:
the Easy Install installation and the Custom Install installation. Select Easy Install in order to install the printer driver,
On-screen Manuals, and application softwares. Select
Custom Install in order to choose the options you would like
to install.
11 When the Installation completed successfully window appears,
click Exit.
tor name and password. Click OK.
If you do not know your administrator name or password, click
, then follow the on-screen instructions.
NOTE: If a message prompting you to restart the computer
appears, check the check box and click Restart.
(start Print Center when you use Mac OS X v.10.2.x) and
then check that the name of the printer you want to use is
shown in Printer List. If the printer name is not displayed,
press the Add button to add the printer.
For more detailed instructions, refer to the Mac on-screen
Help.
NOTE: If the straight line is misaligned or print quality is not
satisfactory after installing the printer driver, you may need
to align the Print Head. Refer to “Aligning the Print Head”
instructions in the Quick Start Guide.
5 When the Easy Install window appears, click Install.
6 When the main menu appears, click Easy Install and follow the
on-screen instructions.
NOTE:
·To install PhotoRecord, click Custom Install and follow the
instructions on the screen.
·Move the cursor over items to display explanations of each
application below.
6 Read the License Agreement, then click Yes to continue.
Installation of the printer driver, On-screen Manuals, and
application softwares will begin. Follow the on-screen
instructions.
NOTE: If the straight line is misaligned or print quality is not satisfactory after installing the printer driver, you may need to align
the Print Head. Refer to “Aligning the Print Head” instructions in
the Quick Start Guide.
NOTE: There are two types of the printer driver installations: the
Easy Install installation and the Custom Install installation.
Select Easy Install in order to install the printer driver, On-screen
Manuals, and application softwares. Select Custom Install in
order to choose the options you would like to install.
Part no. QA7-3554-V01 © 2005 Canon Inc. Windows is a trademark of Microsoft Corporation, registered in the United States and other countries. Macintosh and Mac are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. All other product and brand names are trademarks of their respective owners. Specifications subject to change without notice. Printed in Vietnam.
Download PDF

advertising