Canon | PIXMA MG6120 | User's Manual | Canon PIXMA MG6120 User's Manual

<< Previous
Next >>
Installing Your Multifunction to
Additional Computers on Your Network
PIXMA MG6120
Mac OS
1
<< Previous
Next >>
Installing Your Multifunction to
Additional Computers on Your Network
PIXMA MG6120
Mac OS
Preparing to Connect My Multifunction To My Network
3
Installing The MG6120 Software
5
2
Preparing to Connect My Multifunction
To My Network
<< Previous
Next >>
Network Requirements
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is
complete, and that the computer is connected to the network.
3
Preparing to Connect My Multifunction
To My Network
<< Previous
Next >>
An "Ad-hoc connection," which establishes a direct
connection to the computer over a wireless connection
without using an access point, is not supported.
Be sure to prepare an access point.
Notes on Network Connection
• The configuration, router functions, setup procedures and security settings of
the network device vary depending on your system environment. For details,
refer to your device's instruction manual or contact its manufacturer.
• In an office setup, consult your network administrator
• If you connect to a network that is not protected with security measures,
there is a risk of disclosing data such as your personal information to a third
party.
• If an error message appears or if you have trouble with the network
connection, refer to the printed manual: Network Setup Troubleshooting.
• Place the machine and computer on the same network segment.
4
Installing The MG6120 Software
<< Previous
Next >>
If the machine is already connected to a wireless connection, it
can be used from additional computers on the same network.
Before we begin:
• Log on as the administrator (or a member of the Administrators group).
• Quit all running applications before installation.
• If the firewall function of your security software is turned on, a warning message
may appear that Canon software is attempting to access the network. If such a
warning message appears, set the security software to always allow access.
5
Installing The MG6120 Software
<< Previous
Next >>
Step 1
Step 2
Turn on the computer, then insert the
Setup CD-ROM into the CD-ROM
drive. If you are using Windows, the
setup program starts automatically.
Double-click the Setup icon of the
CD-ROM folder to proceed to the
following screen.
Enter your administrator name and
password, then click OK.
Note:
If the program does not start automatically, double-click
the CD-ROM icon in Computer or My Computer. When
the CD-ROM contents appear, double-click MSETUP4.EXE.
If the CD-ROM folder does not open automatically,
double-click the CD-ROM icon on the desktop.
If you do not know your administrator name or
password, click the help button
,then follow the on-screen instructions.
6
Installing The MG6120 Software
<< Previous
Step 3
Step 4
Click Easy Install
Click Install
Next >>
The drivers, application software, and
on-screen manuals are installed.
Note: If you want to select particular
items to install, click Custom Install.
7
Installing The MG6120 Software
<< Previous
Next >>
Step 5
Step 6
Select Use the printer on network,
then click Next.
When the Printer Detection screen
appears, click Next.
IMPORTANT
IF THE PRINTER CONNECTION SCREEN APPEARS INSTEAD OF THE
SCREEN ABOVE, THE CONNECTION METHOD IS NOT CORRECTLY
SELECTED IN 5.
CLICK CANCEL AND START AGAIN FROM STEP 1, THEN BE SURE TO
SELECT USE THE PRINTER ON NETWORK IN 5.
8
Installing The MG6120 Software
<< Previous
Step 7
Step 8
On the Canon IJ Network Tool screen,
select MG6100 series in Printers, then
click Next.
When the Register Printer and
Scanner screen appears, click
Register Printer.
Next >>
Note:
The alphanumeric characters after Canon MG6100
series is the machine's Bonjour service name or MAC
address.
If the machine is not detected, refer to the printed
manual: Network Setup Troubleshooting. Make sure
there is no problem, then click Update
9
Installing The MG6120 Software
<< Previous
Next >>
Step 9
Step 10
For OS X v. 10.6.x and 10.5.x only
For OS X v. 10.4.11 only
Select Canon MG6100 series
canonijnetwork and click Add.
1. When the Printer List window
appears, click Add.
Go to Step 11.
Note: It may take a minute or two before the printer
appears in the list
Note: When the “You have no printers available”.
screen appears, click Add.
10
Installing The MG6120 Software
<< Previous
Next >>
Step 10 (continued)
Step 10 (continued)
2. Click More Printers in the Printer
Browser window.
3. Click More Printers in the Printer
Browser window.
4. Make sure that Canon MG6100
series is added to the list of
printers.
11
Installing The MG6120 Software
<< Previous
Next >>
Step 11
Step 12
When the Register Printer and
Scanner screen appears, click
Register Scanner.
Select MG6100 series on the Scanfrom-Operation-Panel Settings
screen, then click OK.
12
Installing The MG6120 Software
<< Previous
Next >>
Step 13
Step 14
Click Next on the Register Printer and
Scanner screen.
Follow any on-screen instructions to
proceed with the remaining software
installation.
Wireless setup is now complete
13
Download PDF

advertising