HILTRON - LNB Power Supply System HILTRON H-LNB-PSS
HILTRON - LNB Power Supply System
HILTRON H-LNB-PSS
The Hiltron LNB Power Supply System is a modular redundant
system for the supply, protection, monitoring and control of LNBs
Features
modular LNB supply system
individual monitoring and
control of
LNB
monitoring of RF input level via
Web-interface
Motorized Antenna Mount
modules are hot swapable
Monitoring and control via
Web-interface
Options
The system is flexible and can
be tailored to customer
requirements.
HILTRON LNB Power Supply System H-LNB-PSS
The Hiltron LNB Power Supply System is modular supply system for
SATCOM applications. It protects the LNB and allows to control and to
monitor the supply parameters as well the input signal level.
The system is expandable and consists of one or more supply blocks comprising
each four LNB supply modules. The number of blocks is limited by the max.
available power of the selected main power supplies.
A single module type LNB.50 contains a power control circuitry for setting and
monitoring; the supply voltage and the max. tolerable current. Furthermore it
contains a RF level detector to monitor the total LNB output RF output level.
Each block has a redundant power supply interface A and B and two
communication bus interfaces type RS422 which allows to cascade several
blocks easily.
Due to the modular structure of the system all the supply voltage, the maximum
current and the thresholds for the minimal and maximal tolerable voltages; and
currents as well the RF level can be set individually for each LNB. The
adjustable thresholds can be set via the Web-interface. In case of a malfunction
an alarm will be generated and shown in the Web-Interface.
The LNB supply voltage can be adjusted in the range from 5 V to 18 V. The
maximum supply current is 400 mA.
The communication card module type ACU-NET provides the RS422 serial
interface to be used for communication with the supply blocks and its modules
and an Ethernet interface for system monitoring and control of any individual
LNB.
HILTRON GMBH
Tel.: + 49 (0) 7191 343570
Fax: + 49 (0) 7191 3435750
www.hiltron.de
Revision A
HILTRON - LNB Power Supply System
HILTRON H-LNB-PSS
The supply system is integrated on a 19” rack-mountable base plate. The total
Specifications
height is pre-defined by the height of the LNB supply modules ( type LNB.50)
and is not higher than 100mm
Ordering Information
HILTRON GMBH
Tel.: + 49 (0) 7191 343570
Fax: + 49 (0) 7191 3435750
www.hiltron.de
Revision A
HILTRON - LNB Power Supply System
HILTRON H-LNB-PSS
Order Information
Specifications
Please contact:
Operation Frequency
950 to 2150 MHz
Impedance
50 Ohm
Configuration
block consist of 4 modules LNB.50
Loss
< 1.0 dB
LNB voltage
5 - 18 V adjustable
LNB supply current
400 mA max.
RF connectors
type N
Power Requirements
90 – 264 VAC
47 – 63 Hz
Power Consumption
depending on no. of LNAs
Remote Control
Web-Interface TCP/IP
RJ45, 10/100 Base-T
Mechanical
19" rackable base plate
LxWxH
425 mm x 260 mm x 100 mm
HILTRON GMBH
Tel.: + 49 (0) 7191 343570
Fax: + 49 (0) 7191 3435750
HILTRON GmbH
Emil-Rathenau-Str. 1
71522 Backnang
Germany
T: +49-(0)7191-34357-0
F: +49-(0)7191-34357-50
Mail: [email protected]
www.hiltron.de
Revision A
HILTRON - LNB Power Supply System
HILTRON H-LNB-PSS
HILTRON GMBH
Tel.: + 49 (0) 7191 343570
Fax: + 49 (0) 7191 3435750
www.hiltron.de
Revision A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement