Canon | S300 | Instruction Guide | Canon S300 Instruction Guide

Start Here
Color Bubble Jet™ Printer
S300
Easy Setup Instructions
1 Unpack the Printer
1
3 Install the Printhead
2 Prepare the Printer
Carefully remove all items from the box.
1
Remove the shipping tape from the front
and sides of the printer.
1
Remove the printhead from its package.
4 Install the Ink Tanks
1
Remove the black ink tank (BCI-24 Black)
from its packaging and pull off the orange
protective cap.
5
1
Shipping Tape
S300 Series
Color Bubble Jet Printer
2
2
Turn the printhead over, then remove
the orange protective cap.
Turn the printer off.
IMPORTANT: Be sure printer is
off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
Protective cap
2
Connect the Printer
To Your Computer
Connect one end of a USB cable (not
included) to the computer, the other to
the printer.
NOTE: To avoid spilling ink, do not touch the
bottom of the tank once you have removed
the protective cap.
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
2
Insert the black ink tank into the slot on the
right. Press down gently until the ink tank
locks into place.
3
Repeat the procedure for the color ink tank
(BCI-24 Color), inserting it into the remaining
slot.
Paper Rest
Output Tray
NOTE: Do not touch the electrical contacts.
Electrical contacts
3
Press the POWER button.
POWER
Button
POWER
Light
3
Raise the gray lock lever.
USB Port
USB Cable
Documentation
and Software Kit
4
S300 BJ (Bubble Jet) Printhead
Open the front cover. The printhead holder
automatically moves to the center.
4
4
Power Cord
5
Serial number
Ink Tanks
BCI-24 Black
Gently slide the printhead into the holder
until it is securely seated.
Do not press it down.
BCI-24 Color
5
Write down the serial number located to
the right of the printhead. You will need
this later to register the product.
Lower the lock lever until it locks into place.
Close the front cover and attach the
paper rest and output tray.
Continue with Step 6
on side two.
6 Install the Printer Driver (Windows )
6 Install the Printer Driver (Macintosh )
®
M
ac
in
to
sh
W
in
do
ws
1
7 Align the Printhead
®
Be sure the printer is off before continuing.
POWER
Button
6
POWER
Light
Click Start. (If the Printer Driver button
is not red, select Printer Driver, then
click Start.) The printer driver will start
loading automatically.
1
Insert the S300 Setup Software & User's
Guide CD-ROM.
2
Open the printer driver folder on the
CD-ROM, then double-click the Installer
icon.
7
After the computer restarts, select the
Apple menu, then Chooser.
1
Place a stack of blank paper in the
paper rest.
2
Start the alignment procedure.
Windows:
a. Click Start, then Settings, then
Printers.
b. Right-click the Canon S300 icon,
then click Properties.
NOTE: For Windows 2000, log on to Windows
as an Administrator before continuing.
8
IMPORTANT: If you see this screen,
click Cancel and continue.
2
7
When the Printer Port window appears,
TURN THE PRINTER ON so the printer port
(connection) can be automatically detected.
3
Read the License Agreement, then click
Accept.
4
Click Install. The printer driver will load
automatically.
Read the Welcome screen, then click Next.
8
9
If the message "No other applications can
be running..." displays, click Continue.
6
Read the License Agreement, then click Yes.
5
When the main menu appears, click
Install Software.
9
NOTE: You can now install the BJ Solution
software.
c. Click the down-arrow to select
Test Print.
d. Click the Print Head Alignment icon.
You will need to align the printhead
before printing. Continue with step
7 Align the Printhead.
e. Follow the on-screen instructions
to complete printhead alignment.
If you are prompted to restart the computer,
click Yes. When the installation and
registration process has completed, click Exit.
NOTE: You can now install the BJ Solution
software.
NOTE: If you are prompted to restart Windows,
remove the CD-ROM, then click OK. After the
computer restarts, insert the CD-ROM and continue.
b. Click the Utilities button.
When the installation and registration
process has completed, TURN THE
PRINTER ON, then click Restart.
3
NOTE: Remember to register your product to
ensure product support. The serial number is
located on the inside of the printer, to the
right of the printhead.
10
Close the Chooser.
When the Terminate Installation window
appears, click OK.
10
4
Macintosh:
a. From the File menu in a software
application, click Page Setup.
5
3
e. Follow the on-screen instructions
to complete printhead alignment.
NOTE: To use the BJ Print Monitor, set the
Backgrounding button to the On position.
IMPORTANT: If your computer cannot
detect a printer port, refer to the
Troubleshooting chapter in the
S300 Quick Start Guide for instructions.
NOTE: If the setup program does not run,
click Start, then Run, then type x:\msetup.exe,
where x is your CD-ROM drive.
c. Click the Maintenance tab, then
click the Print Head Alignment icon.
d. When asked to start printhead
alignment, click OK.
The software will begin identifying the
printer port being used.
Close any open software applications,
then insert the S300 Setup Software &
User's Guide CD-ROM. The setup program
should run automatically.
Click the S300 icon in the Chooser. The
printer name will highlight and move to
the right panel.
You will need to align the printhead
before printing. Continue with step
7 Align the Printhead.
Click OK (Windows) or Close (Macintosh)
when finished.
NOTE: Remember to register your product to
ensure product support. The serial number is
located on the inside of the printer, to the
right of the printhead.
Part no. QA7-1635
© 2001 Canon U.S.A. Inc.
Canon, BJ, BCI and Bubble Jet are trademarks of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
PRINTED IN THAILAND
Download PDF

advertising