Tylö VA 5 - 13.2 kW, VB 6 (5.6 / 7.5) kW Steam Generator Installation and operating instructions

The Tylö VA 5 - 13.2 kW and VB 6 (5.6 / 7.5) kW steam generators are designed for use in steam rooms and are equipped with a variety of features to ensure efficient and safe operation. They feature a stainless steel water reservoir, tubular heating elements, automatic emptying and flushing functions, and a built-in safety valve.

PDF Download
Document
Tylö VA 5-13.2 kW & VB 6 (5.6/7.5) kW Steam Generator Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Stainless steel water reservoir
  • Tubular heating elements
  • Automatic emptying
  • Automatic flush function
  • Built-in safety valve
  • Electronic water level control

Frequently asked questions

The frequency of de-scaling depends on the hardness of your water and the usage of the generator. Refer to the table provided in the manual for specific recommendations.

Steam rooms that are used continuously for more than two hours at a time should be ventilated with 10–20 cubic metres of air per person and hour.

Place the sensor 150–170 cm above floor level inside the steam room, as far from the steam jet as possible.

Check for blown fuses, clogged filters, blocked drainage pipes, and make sure the control panel is set correctly.

Check for blockages in the steam pipe, sharp bends, water pockets, or a reduced internal diameter. Also, check for excessive calcium carbonate deposits in the steam generator's reservoir.
ALP:
Preparing document for printing…
0%