advertisement
1. Introduction
1.1
Technical Specifications ............................................................................................ 2
1.2
Checklist .................................................................................................................... 3
2.
Installation
2.1
Connecting the Cables to the Monitor ...................................................................... 4
2.2
Turning on the Monitor ............................................................................................ 4
2.3 Wall-Mount Installation ............................................................................................ 4
3. User Interface Settings
3.1
Using the Front Control Panel ................................................................................... 4
3.2
Using the On-Screen Display (OSD) ........................................................................ 5
3.3
Main Menu ............................................................................................................... 5
3.4 Range of Scanning Frequency.....................................................................................8
4. Plug and Play
4.1
DDC .......................................................................................................................... 8
4.2
System Requirements (recommend) .......................................................................... 8
5. Power Management
.......................................................................................................
9
6. Trouble Shooting
........................................................................................................
9
7. Technical Information
7.1
VGA Pins ............................................................................................................... 10
7.2
AUDIO Specifications ........................................................................................... 10
1
LCD Monitor User
, s Guide
1. Introduction
1.1 Technical Specifications
LCD Monitor
1. Display size: 337.920 (H) X 270.336(V) mm
2. Resolution: 1280 X 1024 75Hz
3. Dot pitch: 0.264(H) X 0.264(V) mm
4. Contrast: 500:1(typical)
5. Angle of View (with contrast more than 10:1)
Horizontal: 140 0 (typical)
Vertical: 130
0
(typical)
6. Response time : 16ms (typical), from ”All White” to “All Black”
7. Brightness: 300cd/m
2
(typical-center)
Based on different panels, all specifications above will be changed.
VGA Input Signal
1. VGA input cable: 15-pin D-shell connector
2. Video: Analog
3. Horizontal synchronization: TTL +/-
4. Vertical synchronization: TTL +/-
5. Frequency resolution: 140MHz (Maximal)
6. Color display: Depending on the VGA card
7. VGA input: 0.7 V pp
8. VGA connectors (See Page 10)
Digital and DVI Input (Optional Accessories)
1. Digital and DVI input cable: 24-pin D-shell connector
2. Video: Digital
3. Digital pins (See Page 11)
4. Compatibility: VESA
Display Data Channels
Compatibility: VESA DDC 1/2B
2
LCD Monitor User
, s Guide
Scanning Frequency
1. Horizontal: Up to 80 KHz
2. Vertical: Up to 75 Hz
Power Supply:
AC Input: 100 ~ 240 Vac, 60/50Hz, 1.5A
DC Output: 12V 4A
Environment:
1. Operating temperature: 0 0 C ~ 50 0 C
2. Operating humidity: 10% ~ 95%
3. Storage temperature : -20 0 C ~ 60 0 C
4. Storage humidity : 8% ~ 95%
1.2 Checklist
Before using the LCD monitor, make sure that all the following items are available in the package.
1. TFT LCD Monitor
2. User’s Manual
5. Power Cord
6. Audio Cable
7. Digital Cable (optional)
3. DC Adapter
4. VGA Cable
3
LCD Monitor User
, s Guide
2. Installation (Reference figures on page 0.)
2.1 Connecting the Cables to the Monitor
a. Connect the VGA cable and power cord to the back of the 17” LCD monitor.
b. Connect the connector to the AC input on the DC adapter and the plug of the power
cord to the wall outlet.
c. Install and fix the cables.
2.2 Turning on the Monitor
a. Switch on the power of the 17” LCD monitor and your computer.
b. Please turn the LCD monitor off first when unplug adapter.
2.3 Wall-Mount Installation
To enhance this function, you need a
VESA wall-mount kit,
which is not supplied in the package.
a. Place the monitor carefully on a horizontal surface.
b. Remove the hinge cover.
c. Remove the pivot screw and take off base.
d. Assemble the VESA wall-mount kit to the rear cover.
e. Hang the LCD monitor and VESA wall-mount kit on the wall.
3.User Interface Settings
3.1 Using the Front Control Panel
Power switch : To turn ON or OFF the power.
or
or
+
+ : Shift the icon to right side
+ : Shift the item up.
+ : To increase the volume or brightness of the parameter in the OSD you have
selected for adjustment.
+ : To increase the volume or brightness directly when OSD menu is not activated.
- : Shift the icon to left side.
- : Shift the item down.
- : To decrease the volume or brightness of the parameter in the OSD you have selected for adjustment.
- : To decrease the volume or brightness directly when OSD menu is not activated.
4
LCD Monitor User
, s Guide
Menu or
MENU : To enter OSD menu for related icon and item.
Auto or
Auto Button : One touch auto adjustment.
Power LED : Lights up to indicate the power is turned ON.
3.2 Using the On-Screen Display (OSD)
To adjust the settings:
a. Press MENU to enter or exit the OSD menu.
b. Use +/- or to select the OSD icon of the item you want to adjust.
c. Press MENU and use +/- or to select the items.
d. Press MENU and use +/- or to adjust the values.
3.3
Main Menu
INPUT SELECT
DISPLAY ADJUST
COLOR ADJUST
OSD ADJUST
LANGUAGE
SCREEN ADJUST
AUDIO ADJUST
EXIT
Main Menu
5
6
LCD Monitor User
, s Guide
1.
Input Select(optional)
VGA
DVI
RECALL
RETURN
INPUT SELECT
Setting Option Description
VGA Select VGA input
DVI Switch to DVI input
RECALL Return to default setting
RETURN Back to main menu
2.
Display Adjust
H-POSITION
V-POSITION
CLOCK
PHASE
AUTO ADJUST
RECALL
RETURN
DISPLAY ADJUST
Setting Option Description
H-POSITION Adjust the picture left or right
V-POSITION Adjust the picture up or down
CLOCK Stretch or squeeze the display horizontally
PHASE Fine-tune the display quality
AUTO TUNE Adjust the screen position,clock & phase auto
RECALL Return to default setting
RETURN Back to main menu
3.
Color Adjust
9300K
R
G
7500K
6500K
B
RECALL
RETURN
COLOR ADJUST
Setting Option Description
9300K
7500K
Settings of 9300 o
Settings of 7500 o
6500K Settings of 6500 o
RED Adjust red setting
GREEN Adjust green setting
BLUE Adjust blue setting
RECALL Return to default setting
RETURN Back to main menu
4.
OSD Adjust
OSD ADJUST
OSD H-POSITION
OSD V-POSITION
OSD TIMER
TRANSPARENCY
RECALL
RETURN
50
Setting Option Description
OSD H-POSITION Adjust the OSD left or right
OSD V-POSITION Adjust the OSD up or down
OSD TIMER Adjust the time out of the OSD display
OSD TRANSPARENCY Adjust the transparency of the OSD
RECALL Return to default setting
RETURN Back to main menu
5.
Language
English
Francais
Deutsch
Italiano
Espanol
Japanese
中文繁體
中文簡體
RECALL
RETURN
LANGUAGE
LCD Monitor User
, s Guide
Setting Option Description
ENGLISH
FRENCH
GERMAN
ITALIAN
Select the OSD language
SPANISH
JAPANESE
CHINESE TRADITIONAL
CHINESE SIMPLIFY
RECALL Return to default setting
RETURN Back to main menu
6.
Screen Adjust
CONTRAST
BRIGHTNESS
TEXT
RECALL
RETURN
SCREEN ADJUST
Setting Option Description
CONTRAST Adjust the contrast of the screen
BRIGHTNESS Adjust the brightness of the screen
TEXT Text / Graphic
RECALL Return to default setting
RETURN Back to main menu
7.
Audio Adjust
CONTRAST
BRIGHTNESS
TEXT
RECALL
RETURN
SCREEN ADJUST
Setting Option Description
VOLUME Adjust the volume of the audio
MUTE Adjust to mute mode
RECALL Return to default setting
RETURN Back to main menu
7
6
7
4
5
No.
1
2
3
8
9
10
11
12
13
LCD Monitor User
, s Guide
3.4 Range of Scanning Frequency
We suggest that you select an option from the following list:
Resolution
640*350
720*400
640*480
640*480
640*480
800*600
800*600
800*600
1024*768
1024*768
1024*768
1280*1024
1280*1024
Frequency (H)
31.467(+)
31.467(-)
31.409(-)
37.861(-)
37.500(-)
37.879(+)
48.077(+)
46.875(+)
48.363(-)
56.476(-)
60.023(+)
64.000(+)
80.000(+)
Frequency (V)
70.082(-)
70.082(+)
59.487(-)
72.809(-)
75.000(-)
60.317(+)
72.188(+)
75.000(+)
60.004(-)
70.069(-)
75.029(+)
60.000(+)
75.000(+)
4. Plug and Play
4.1 DDC
With the Display Data Channel (DDC), the monitor informs the main system of ID information.
It also reports other display capacity levels to the main system according to the DDC level in use.
DDC 1: a one-way Display Data Channel.
DDC 2: a two-way Display Data Channel.
The LCD monitor supports DDC1/2B displays.
4.2 System Requirements (recommend)
PC: 500MHz processor or fast.
Microsoft Windows ® 95 or higher.
8
LCD Monitor User
, s Guide
5. Power Management
The power-management system of the LCD monitor fulfils the standards of the Video Electron-
ics Standards Association (VESA)
and the US Environmental Protection Agency
(EPA) to reduce power consumption and save energy.
The operating system or Windows Utilities will start the power-management system, which may turn off the monitor and disable/change the color of the power LED indicator.
Power Mode
Normal
Standby
Suspend
Off
Beyond
H-SYNC
Yes
No
Yes
No
Yes
V-SYNC
Yes
Yes
No
No
Yes
Screen
Yes
No
No
No
No
Audio
Yes
No
No
No
No
LED Power
Consumption
Green <48W
Orange or Red <5W
Red
Red
<5W
<5W
Red <5W
6. Trouble Shooting
Q1 : No display on the monitor or any malfunction.
The Power LED is off: Check that the power cord is properly connected.
The Power LED is red: Check that the video cable is properly connected. Check that the
computer is turned on.
The Power LED is green: Check that the H-SYNC frequency is not beyond the limit.
Adjust the brightness and contrast.
If malfunction still exists, turn the machine off and re-turn it on.
Q2: Picture is fuzzy (with noise, flicks, etc.)
1. Adjust the monitor by using the Auto Tune function. Check the clock of the computer
to make sure that it is compatible with the monitor.
Both the video LED indicators, i.e. H-SYNC (horizontal synchronization) and V-SYNC
(vertical synchronization), also show power consumption.
When power consumption goes beyond the limits:
H-SYNC > 80KHz, H-SYNC < 29KHz
V-SYNC > 75Hz, V-SYNC < 60Hz
2. Press AUTO to adjust automatically
3. Adjust AUTO TUNE in display adjust menu
4. Adjust PHASE in display adjust menu
Q3:
Please remove the original monitor data under “Device Manager” in OS and restart the computer if your computer system is Windows
®
98 or lower.
9
LCD Monitor User
, s Guide
7.Technical Information
Warning:
Only qualified service personnel should open the monitor cover since some components inside the monitor may cause a severe electronic shock. Do not open the monitor cover without help.
If your monitor needs repairing, contact the retailer or authorized service personnel.
Do not expose the monitor to the rain or moisture to avoid fire or an electronic shock.
Specifications:
Safety standards: CE/ FCC/ UL
Maximal tilt angle (upward): 15 0
Maximal tilt angle (downward): 5
0
7.1 VGA Pins
Pin No.
1
2
3
6
7
4
5
8
Signal
Red Video
Green Video
Blue Video
No connection
Ground
Red ground
Green ground
Green ground
7.2 AUDIO Specifications:
Output : Above 1W (x2) RMS
Control : Volume
Response : 30Hz~20KHz
Headphone : Yes
Pin No.
9
10
11
12
13
14
15
Signal
No connection
Ground
No connection
SDA
Horizontal sync
Vertical sync
SCL
10
The user may lose the right to operate this device by making any changes or modification not approved by the authorized department.
LCD Monitor User
, s Guide
Class B Redio Frequency
Federal Communications Commission Radio Frequency Interference
Statement Warning:
Note: This equipment has been found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation absolutely following the regulations. If this equipment does cause harmful interference to radio or television reception, that can be determined by turning the equipment off and on, the user is encouraged to correct the interface by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a different circuit to the one the receiver is connected to.
Consult your dealer or an experienced radio/TV technician for help.
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
*DVI Pins
Pin No.
1
2
3
4
9
10
11
12
7
8
5
6
Signal Assignment
T.M.D.S Data2-
T.M.D.S Data2+
T.M.D.S Data2/4 Shield-
T.M.D.S Data4-
T.M.D.S Data4+
DDC Clock
DDC Data
No Connect
T.M.D.S Data1-
T.M.D.S Data1+
T.M.D.S Data1/3 Shield-
T.M.D.S Data3-
22
23
24
18
19
20
21
Pin No.
13
14
15
16
17
Signal Assignment
T.M.D.S Data3+
+5V POWER
Ground (For+5V)
Hot Plug Detect
T.M.D.S Data0-
T.M.D.S Data0+
T.M.D.S Data0/5 Shield-
T.M.D.S Data5-
T.M.D.S Data5+
T.M.D.S Clock Shield
T.M.D.S clock+
T.M.D.S clock-
11
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Technical Specifications
- 3 Checklist
- 4 Connecting the Cables to the Monitor
- 4 Turning on the Monitor
- 4 2.3 Wall-Mount Installation
- 4 Using the Front Control Panel
- 5 Using the On-Screen Display (OSD)
- 5 Main Menu
- 8 3.4 Range of Scanning Frequency
- 8 System Requirements (recommend)
- 10 VGA Pins
- 10 AUDIO Specifications