Casio | EX-TR500 | Owner's Manual | Casio EX-TR500 Owner's Manual

EN
Digital Camera
User’s Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
Accessories
As you unpack your camera, check to make sure that all accessories shown below
are included. If anything is missing, contact your original retailer.
Rechargeable lithium ion
battery (NP-150)
USB-AC adaptor
(AD-C54UC)
2
Micro USB cable
Read this first!
• The contents of this manual are subject to change without notice.
• The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost
profits, or claims by third parties arising out of the use of EXILIM Remote.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
• Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that
provides a pixel yield in excess of 99.99%. This means that some very small number
of pixels may not light or may remain lit at all times. This is due to the characteristics
of the liquid crystal panel, and does not indicate malfunction.
Take test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.
3
Contents
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monitor Screen Contents and How to Change Them . . . . . . . . . . . . . . . . . . . .
]\Quick Start Basics
2
3
8
9
11
What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Changing the Camera Style to Suit Shooting Conditions . . . . . . . . . . . . . . . . 13
] Opening and Closing the Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
] Rotating the Monitor Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
] Camera Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Using the Touch Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
] Loading the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
] Charge the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . . 24
Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
] Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
] To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
] To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Turning Power On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
To Shoot a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
] Selecting an Auto Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
] To shoot a snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Deleting Snapshots and Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
]\Recording Images
37
Selecting a Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
] Shooting with Posing Shot . . . . . . . . . . . . . . . . . . . . . . . . . . . (Posing Shot) . . . 39
] Shooting with Artistic Effects . . . . . . . . . . . . . . . . . . . . . . . . . .(ART SHOT) . . . 40
] Shooting Three Versions of an Image with
Different Skin Tone Settings . . . . . . . . . . . . . . . . . . . . . . . . .(Make-up BKT) . . . 42
] Recording Beautiful Portraits . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Make-up) . . . 43
Using the Camera as a Mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shooting with Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shooting a Self-portrait . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
44
45
46
47
Contents
]\Using BEST SHOT
50
Shooting with Triple Shot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Motion Shutter to Trigger a Self-timer Operation . .(Motion Shutter) . .
Digitally Correcting for Overexposure and Underexposure . . . . . . (HDR) . .
Shooting with High Speed Night Scene . . . . . . . . . . . . .(HS Night Scene) . .
Shooting with High Speed Night Scene
and Portraits . . . . . . . . . . . . . . . . . . . . . . . . . . . (HS Night Scene Portrait) . .
]\Advanced Recording Settings
51
52
53
53
54
55
Using the REC Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
]
]
]
]
]
]
]
]
]
]
Using Touch Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Touch Shutter) . . .
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer) . . .
Using the LED Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (LED) . . .
Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Image Size) . . .
Movie Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . . (Movie Quality) . . .
Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . (Brightness) . . .
Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance) . . .
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(ISO) . . .
Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Focus) . . .
Turning on Image Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Review) . . .
]\Viewing Snapshots and Movies
56
56
57
58
59
59
60
61
62
63
64
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
] Editing a Movie on the Camera . . . . . . . . . . . . . . . . . . . . . . (Movie Editing) . . . 66
Viewing the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Viewing Snapshots and Movies on a TV Screen . . . . . . . . . . . . . . . . . . . . . . . 68
]\Other Playback Functions
(PLAY)
70
Using the PLAY Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Creating a Promotion Movie . . . . . . . . . . . . . . . . . . . . . (Promotion Movie) . . .
Performing Paint Operations on an Image . . . . . . . . . . . . . . . . . . . . .(Paint) . . .
Playing a Slideshow on the Camera . . . . . . . . . . . . . . . . . . . . (Slideshow) . . .
Extracting an Image from a Snapshot . . . . . . . . . . . . . . . .(Cut out subject) . . .
Inserting a Subject into another Snapshot or
Adding a Built-in Frame to a Snapshot . . . . . . . . . . . . . . . . (Paste subject) . . .
] Protecting a File Against Deletion . . . . . . . . . . . . . . . . . . . . . . . . . (Protect) . . .
] Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation) . . .
] Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize) . . .
] Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Trimming) . . .
]
]
]
]
]
5
70
72
73
73
75
76
77
77
78
Contents
]\Establishing a Wireless LAN Connection
79
Wireless LAN Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Establishing a Connection between a Smartphone and Your Camera . . . . . . 81
] Installing the EXILIM Remote App on Your Smartphone . . . . . . . . . . . . . . . . . . 81
] Configuring Wireless LAN Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Using a Smartphone as a Camera Remote Controller . (Remote Capture) . .
Sending a Just-recorded Snapshot to a Smartphone . . . (Send Last Shot) . .
Sending a Snapshot or Movie File from Camera Memory
to a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Send to phone) . .
Resizing Snapshots before Sending Them
to a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize before send) . .
Viewing Snapshots and Movies in Camera Memory
on a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (View on phone) . .
]\Printing
83
85
86
87
88
89
Printing with a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
]\Using the Camera with a Computer
91
Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . . 91
] Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
] Playing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
] Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . . 95
] Playing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
]\Other Settings
(Set Up) 100
Adjusting Monitor Screen Brightness . . . . . . . . . . . . . . . . . . . . . .(Screen) .
Selecting Display Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Info) .
Locking the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Screen Lock) .
Resizing Snapshots before Sending Them
to a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize before send) .
Configuring Camera Sound Settings . . . . . . . . . . . . . . . . . . . . . (Sounds) .
Time Stamping Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . .(Timestamp) .
Configuring World Time Settings . . . . . . . . . . . . . . . . . . . . . (World Time) .
100
100
101
101
101
102
103
] Setting a Travel Destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
] Selecting the Time Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) .
Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) .
Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) .
Selecting the HDMI Terminal Output Method . . . . . . . . . . . . . . . . . (HDMI) .
6
104
104
105
105
Contents
Changing the Camera Password for
Wireless LAN Connection . . . . . . . . . . . . . . . . . . . . . . . (WLAN password) .
Displaying a Startup Screen at Power On . . . . . . . . . . . . . . . . . .(Startup) .
Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . .(Format) .
Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . .(Reset) .
]\Appendix
106
106
107
107
108
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Precautions During Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
] Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
] Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
] Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
] Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
] Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Number of Snapshots/Movie Recording Time . . . . . . . . . . . . . . . . . . . . . . . . 130
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
7
Contents
General Guide
The numbers in parentheses indicate the pages where each item is explained.
12
3
9
bk
4
5
6
8
7
1 Frame (page 13)
2 Shutter button (page 31)
3 [HDMI] cover (page 68)
4 LED light (page 57)
5 Lens
6 Microphone
(pages 16, 49)
bo
bl
bn bm
7[HDMI] HDMI output
(micro) (page 68)
8[USB] port
(pages 19, 22, 92, 96)
9[p] (Power) (page 29)
bkBack lamp
(pages 20, 23, 29, 31)
blStrap hole (page 8)
bmMonitor screen
(pages 9, 9, 16, 100)
bnSpeaker
boBattery compartment (page 18)
bpMemory card slot (pages 27, 122)
bq[OPEN] button (pages 18, 27)
bp
bq
• Above illustration shows the camera’s cover removed (page 18).
To attach the strap (commercially available or
separately available) to the camera
1
Attach strap here.
2
8
Monitor Screen Contents and How to Change Them
The monitor screen uses various indicators, icons, and values to keep you informed
of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the
indicators and figures that can appear on the monitor screen in various modes.
They do not represent screens that actually appear on the camera.
. Snapshot Recording
1
2
3
4
5
6
7
8
9
bk
bs
br
bq
bp
cm cl ck bt
bkMovie quality (pages 47, 59)
blSend Last Shot icon (page 85)
bmBattery level indicator (page 24)
bnRemaining movie memory capacity
(page 131)
bo bn bm bl
boRemaining snapshot memory capacity
1PLAY mode icon (page 29)
” (Show Icons) icon
2“
3LED light (page 57)
4White Balance (page 60)
5Focus mode (page 62)
6Digital zoom (page 45)
7Timestamp (page 102)
8Self-timer mode (page 56)
9Snapshot image size (page 58)
(page 130)
bp“ ” Movie icon (pages 32, 47)
bqDate/Time (pages 24, 104)
brBrightness (page 59)
bsISO sensitivity (page 61)
btMenu icon (page 55)
ckRecording mode icon (page 38)
clRemote capture icon (page 83)
cmMirror mode icon (page 44)
. Movie Recording
1
2 34
1Movie quality (pages 47, 59)
2Recording time switch icon (page 48)
3Movie remaining time icon (page 48)
4Remaining movie memory capacity/
Movie recording time (pages 48, 131)
” Movie stop icon (pages 32, 48)
5“
5
9
. Snapshot Viewing
12 3 4
bm
bl
bk
9
8
7
bq
bp bo bn
5
6
1Protect indicator (page 76)
” (Show Icons) icon
2“
3Folder name/file name (page 98)
4Snapshot image size (page 58)
5Battery level indicator (page 24)
6Date/time (pages 24, 104)
7Image menu icon (page 67)
8Shutter speed
9 Make-up (page 43)
bkBrightness (page 59)
blISO sensitivity (page 61)
bmWhite Balance (page 60)
bnMenu icon (page 70)
boDelete icon (page 34)
bpImage send icon (pages 86, 88)
bqREC mode icon (page 29)
. Movie Playback
12 3 4
5
8
7
1Protect indicator (page 76)
” (Show Icons) icon
2“
3Folder name/file name (page 98)
4Movie quality (pages 47, 59)
5Movie recording time (page 64)
6Date/time (pages 24, 104)
7Image menu icon (page 67)
8“ ” Movie play icon (page 64)
6
10
Quick Start Basics
What you can do with your CASIO camera
Your CASIO camera is packed with a powerful selection of features and functions to
make recording of digital images easier, including the following main functions.
A variety of shooting styles
The frame can be opened and the LCD monitor screen
rotated into positions that make long-term shooting
more comfortable and simplify self-shooting.
*See page 13 for more information.
Simple touch panel operation
The monitor screen is a touch panel that can be used
to perform operations.
*See page 16 for more information.
Simple self-portrait shooting
The monitor screen can be rotated so it faces in the
same direction as the camera’s lens, making selfshooting much easier.
*See page 46 for more information.
Shooting better looking portraits
Make-up enables adjustment of human skin tone hues
and texture, and softening of facial shadows caused by
harsh sunlight for better looking portraits.
*See page 43 for more information.
Posing Shot
Posing Shot lets you shoot five successive snapshots,
as the camera provides voice guidance.
*See page 39 for more information.
11
Quick Start Basics
ART SHOT
A variety of artistic effects help to make even common,
ordinary subjects become more novel and exciting.
“ART SHOT” provides the following effects: HDR Art,
Crystal Ball, Sparkling Shot, Toy Camera, Soft Focus,
Light Tone, Pop, Sepia, Monochrome, Miniature,
Fisheye.
*See page 40 for more information.
Paint
Draw figures, write text, or stamp information into a
recorded snapshot.
*See page 72 for more information.
Wireless LAN Connection
Turns your smartphone into a camera remote
controller and allows you to send images recorded with
your camera to your smartphone.
*See page 79 for more information.
12
Quick Start Basics
Changing the Camera Style to Suit Shooting Conditions
You can change the configuration of the camera by opening or closing the frame and
rotating the monitor screen panel to suit shooting conditions.
IMPORTANT!
• Do not apply strong pressure to the surface of the monitor screen. Doing so can
damage it.
• Never touch the lens with your fingers. Finger smudges, dirt, and other foreign
matter on the lens can interfere with proper operation of the camera. Use a blower
or other means to keep the lens and flash window free of dirt and dust, and wipe
gently with a soft, dry cloth.
Opening and Closing the Frame
The camera’s frame can be rotated 90 degrees
towards the lens side and 225 degrees towards
the opposite side.
90 degrees
225 degrees
1.
With the lens facing towards you, hold
onto the frame.
2.
Push the monitor screen panel.
3.
Holding the edges of the monitor
screen panel, swing the frame open.
IMPORTANT!
• Do not try to open or close the frame while the monitor screen panel is rotated.
Doing so can cause the frame to come into contact with the monitor screen panel
and cause malfunction.
13
Quick Start Basics
Rotating the Monitor Screen
Use the steps below to rotate the monitor screen.
NOTE
• While holding the monitor screen panel as shown in the illustration, you can rotate
it 180 degrees clockwise and 90 degrees counterclockwise.
• The monitor screen panel can also be rotated when the frame is closed.
1.
Hold the camera as shown in the
illustration.
2.
Firmly holding the frame, carefully rotate the monitor screen panel.
180 degrees clockwise
90 degrees counterclockwise
14
Quick Start Basics
Camera Configurations
You can open the frame and rotate the monitor screen for a variety of different styles.
Normal Shooting
Movie Recording
Shoot with the monitor screen facing the
opposite direction of the lens.
Open the frame 90 degrees and hold the
frame. You can also shoot with the
camera upside down, if you like.
Tabletop Shooting
Point the monitor screen and lens in the
same direction and open the frame
about 30 degrees so the camera can
stand up.
Self-portrait Shooting
Open the frame, point the monitor
screen and lens in the same direction.
15
Quick Start Basics
NOTE
• When shooting hold the camera still. Carefully press the shutter button and take
care to avoid all movement as the shutter releases and for a few moments after it
releases.
• Take care that your fingers and the strap do not cover
LED light
any of the areas indicated in the illustration.
• To protect against accidentally dropping the camera,
attach the wrist strap (commercially available or
separately available) and make sure it is around your
fingers or wrist while you are operating the camera.
• Never swing the camera around by its strap.
Microphone
Lens
IMPORTANT!
• Take care to ensure that your finger is not blocking or
is not too close to the LED light. Fingers can cause
unwanted shadows when shooting.
Using the Touch Panel
The monitor screen of the camera is a touch panel. This means you can perform the
following operations by touching the screen with your fingers.
Touch
Momentarily touching the screen with your finger.
Touch the screen to select an icon or menu item, and
to configure settings.
Touch-and-hold
Holding your finger against the screen.
Touch and hold the screen to perform continual
frame-by-frame playback of a movie.
16
Quick Start Basics
Drag
Holding your finger against the screen as you drag it
up, down, left, or right.
Use drag to move a screen image to a different
location, and to scroll between images.
Spread
Holding your thumb and forefinger against the screen
as you spread them out.
Use spread to enlarge the screen image.
Squeeze
Holding your thumb and forefinger against the screen
as you bring them together.
Use squeeze to reduce the size of the screen image.
IMPORTANT!
• Never use a pointed or hard object to perform screen operations. Doing so can
damage the screen.
• The camera will have a hard time interpreting a screen operation made using your
fingernails. Use the fleshy pad of your finger.
NOTE
• Applying a commercially available LCD protective sheet will reduce the operation
sensitivity of the monitor screen.
17
Quick Start Basics
First, charge the battery prior to use.
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-150)
for power. Never try to use any other type of battery.
Loading the Battery
1.
Open the frame (page 13).
2.
Open the cover.
While depressing the [OPEN] button, slide
the cover in the direction of arrow 2 in the
nearby illustration.
1
3
2
[OPEN] button
3.
Load the battery.
Battery
With the CASIO logo on the battery
upwards, load the battery into the
camera as shown in the illustration.
NG
OK
CASIO logo
4.
Close the cover.
• Positioning the cover about two millimeters from
the lens unit, keep it parallel with the camera as
you slide it in the direction of arrow 1 and then
arrow 2 to secure it in place.
18
1
2mm
2
Quick Start Basics
To replace the battery
1.
Open the cover and remove the current
battery.
As shown in the illustration, pull up the edge of
the battery to remove it.
2.
Load a new battery.
Charge the Battery
You can use either of the two following methods to charge the battery. Before
charging the battery, use the procedure under “Opening and Closing the Frame”
(page 13) to open the frame.
• USB-AC adaptor
• USB connection to a computer
. To charge with the USB-AC adaptor
The adaptor lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below.
Charging time: Approximately 140 minutes
[USB] port
USB-AC adaptor
1
3
2
Micro USB cable
(included with camera)
u mark of the small (micro USB) connector
facing the side opposite that of the monitor screen.
• When disconnecting the USB-AC adaptor from the camera, be sure to disconnect
from the camera first.
19
Quick Start Basics
IMPORTANT!
• A battery that has not been used for a long time, or ambient temperature extremes
can cause charging to take longer than normal. If charging takes longer than about
five hours, a timer will terminate it automatically, even if the battery is not fully
charged. This is indicated by the back lamp flashing red. If the battery has not been
used for a very long time, charging may be terminated automatically and the back
lamp may start flashing red after only about 60 minutes. In either case, disconnect
the USB cable from the camera and then reconnect it to resume charging.
• Pressing [p] (Power) while the USB-AC adaptor is connected to the camera will
turn on the camera with power being supplied by the battery. Because of this,
charging will stop.
• The USB-AC adaptor will become warm during charging. This is normal and does
not indicate malfunction.
• The shape of the power plug depends on each country or geographic area.
Back Lamp Operation
Back lamp
Lamp Status
Description
Lit Red
Charging
Flashing Red
Abnormal ambient temperature, USB-AC
adaptor problem, or battery problem (page
120), or charging terminated by the timer
Off
Charging complete
20
Quick Start Basics
USB Cable Connection Precautions
• When connecting the USB cable to the camera, make sure that the cable
connector and monitor screen panel are oriented correctly as shown in the
illustration below.
Make sure that the u mark side of the
USB cable connector and the front of the
monitor screen panel (the side opposite that
of the monitor screen) are facing in the same
direction.
Front of monitor screen
panel
The back lamp always initially light after charging starts. Even if the battery is
already fully charged, the lamp will light momentarily.
If the lamp does not light, check the orientation of the USB cable connector.
• Make sure that you insert the cable connector into the USB port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
21
Quick Start Basics
. To charge using a USB connection to a computer
USB connection lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below (1, 2).
Computer
(power turned on)
[USB] port
USB port
USB
2
1
Micro USB cable
(included with camera)
u mark of the small (micro USB) connector facing the side
opposite that of the monitor screen.
• If the camera is on, press [p] (Power) to turn it off before connecting it to your
computer.
Charging time: Approximately 170 minutes
IMPORTANT!
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and then
reconnect the USB cable.
• A battery that has not been used for a long time, certain types of computers, and
connection conditions can cause charging to take more than approximately five
hours, which will trigger a timer that terminates charging automatically, even if the
battery is not fully charged. If this happens, disconnect and then reconnect the
USB cable to restart charging. To complete charging faster, use of the included
USB-AC adaptor is recommended.
• If the battery has not been used for a very long time, charging may terminate
automatically and the back lamp may start flashing red or go out after only about
60 minutes. In either case, use of the USB-AC adaptor that comes with the camera
is recommended.
• If you turn on the camera while charging over a USB connection to a computer is in
progress, the camera will establish a USB connection with the computer. Though
charging normally should continue at this time, certain types of computers or
connection environments may stop charging if supply power is low. This will be
indicated by the camera’s back lamp lighting green.
• Charging is not performed while the connected computer is in the hibernate mode.
22
Quick Start Basics
Back Lamp Operation
Back lamp
Lamp Status
Description
Lit Red,
(Lit/Flashing Amber)
Charging
Flashing Red
Abnormal ambient temperature,
charging taking abnormally long, or
battery problem (page 120)
Off, (Lit Green)
Charging complete
• The information in parentheses in the above table shows the lamp status while the
camera is turned on during charging.
Other Charging Precautions
• With the two charging methods described above, you can charge the camera’s
battery (NP-150) without removing it from the camera. Never use any other type of
charger device. Attempting to use a different charger can result in unexpected
accident.
• This model can be charged only via from USB 2.0 specification USB port only.
• USB charging devices and power supply devices are subject to fixed standards.
Use of an inferior device or a device that is not up to standard can cause
malfunction and/or failure of your camera.
• Operation is not guaranteed in the case of a computer built or modified by you.
Even in the case of a commercially available computer, certain USB port
specifications may make it impossible to charge via the USB cable.
• A battery that is still warm immediately after normal use may not charge fully. Give
the battery time to cool before charging it.
• A battery discharges slightly even when it is not loaded in the camera. Because of
this, it is recommended that you charge the battery immediately before you need to
use it.
• Charging the camera’s battery may cause interference with TV and radio reception.
If this happens, plug the USB-AC adaptor into an outlet that is further away from
the TV or radio.
• Actual charging time depends on current battery capacity and charging conditions.
• Do not use the USB-AC adaptor with any other device.
• Never use the power cord with another device.
• Use only the USB-AC adaptor and USB cable specified in this manual for charging.
Use of any other type of devices may result in improper charging.
23
Quick Start Basics
Checking the Current Battery Level
As battery power is consumed, a battery indicator on the monitor screen indicates its
current level as shown below.
Remaining Power
High
Battery Indicator
Indicator Color
Low
*
White
*
*
White
*
*
Red
*
Red
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when
is indicated. Charge the battery immediately.
The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about 20 days with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
104).
• See page 134 for information about battery life and number of shots.
Configuring Basic Settings the First Time You Turn On the
Camera
The first time you turn on the camera, a screen appears for configuring the display
language, date, and time settings. Failure to set the date and time correctly will cause
the wrong date and time data to be recorded with images.
IMPORTANT!
• A screen for language selection will not appear in step 2 of the procedure below if
you purchased a camera intended for the Japanese market. To change the display
language from Japanese in this case, use the procedure under “Specifying the
Display Language (Language)” (page 105). Note that a version of this manual in
the language you select may not be included with a camera intended for the
Japanese market.
• Camera models sold in certain geographic areas may not support display language
selection.
24
Quick Start Basics
1.
Press [p] (Power) to turn on the camera.
2.
Drag (page 17) upwards and downwards until
you find the language you want, and then touch
to select it.
3.
Touch the date display format you want.
Example: July 10, 2015
YY/MM/DD * 15/7/10
DD/MM/YY * 10/7/15
MM/DD/YY * 7/10/15
[p] (Power)
4.
Touch the value you want to change (year, month,
day, hour, minute).
5.
Touch “
value.
”, “
” to change the currently selected
• Touching and holding “ ”, “ ” will change the setting
at high speed.
• To switch between 12-hour and 24-hour format, touch
the 12/24 hour switch icon.
12/24 hour switch
icon
6.
When the date and time settings are the way you
want, touch “OK”.
7.
Touch “Auto” or “Premium Auto Pro” to select the default auto
recording mode you want.
8.
Touch “Apply”.
• You will be able to change this setting later, if you want. See page 30 for
details.
If you make a mistake configuring display language, date, or time settings with the
above procedure, refer to the following pages for information about how to correct
the settings.
– Display language: Page 105
– Date and time: Page 104
NOTE
• Each country controls its local time offset and the use of summer time, and so they
are subject to change.
25
Quick Start Basics
Preparing a Memory Card
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
• For information about memory card capacities, see page 130.
Supported Memory Cards
– microSD Memory Card
– microSDHC Memory Card
– microSDXC Memory Card
• The above are supported memory card types as of June 2014.
• This camera supports use of microSD memory cards of the
following types and capacities: microSD memory cards up to 2GB, microSDHC
memory cards from 2GB up to 32GB, microSDXC memory cards from 32GB up to
2TB. Note that the ability to use any particular card with this camera, even if it
satisfies the above capacity and type requirements, is not guaranteed.
* Warning!
0 Memory cards are small and present a risk of accidentally being swallowed
by infants and young children. Keep memory cards out of the reach of
infants and young children. If a memory card is ever swallowed accidentally,
contact a physician immediately.
26
+
Quick Start Basics
To load a memory card
1.
2.
3.
Press [p] (Power) to turn off the
camera and then open the frame
(page 13).
1
While holding down [OPEN], slide
the cover in the direction of arrow
2 in the nearby illustration to
remove it.
3
2
[OPEN] button
Load a memory card.
Positioning the memory card as shown in
the nearby illustration insert it into the
camera’s memory card slot and press
until you hear it click into place.
Front
Front
4.
Close the cover.
• Positioning the cover about two millimeters from
the lens unit, keep it parallel with the camera as
you slide it in the direction of arrow 1 and then
arrow 2 to secure it in place.
Back
1
2mm
2
IMPORTANT!
• Never insert anything besides a supported memory card (page 26) into the memory
card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off
the camera, and contact your retailer or nearest CASIO authorized service center.
27
Quick Start Basics
. To replace the memory card
Press the memory card and then release it. This will
cause it to pop out of the memory card slot slightly.
Pull the card out the rest of the way and then insert
another one.
• Never remove a card from the camera while the
back lamp is flashing green. Doing so can cause the
image save operation to fail and even damage the
memory card.
To format (initialize) a new memory card
Format a memory card on the camera before using it for the first time.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a card on a
computer will result in a non-SD standard format, which can greatly slow down
processing time and cause compatibility, performance, and other problems.
1.
Load a memory card (page 27).
2.
Turn on the camera and then touch “
3.
Touch “MENU”.
4.
Drag upwards and downwards until you find “Setup”, and then touch it.
5.
Touch “Format”.
6.
Touch “Format” and then touch “Yes”.
” (Show Icons).
This starts the memory card format operation.
28
Quick Start Basics
Turning Power On and Off
. To turn on the camera
Back lamp
Press [p] (Power).
This will turn on the camera, which is indicated when the
back lamp lights green, and enter the REC mode.
Entering the REC Mode and PLAY Mode
To enter the
PLAY mode
In the REC mode, touch “ ” (PLAY).
• If “ ” (PLAY) is not displayed on
the screen, you can touching the
Review image (page 63), or switch
to the PLAY mode by touching
“
” (Show Icons) and then
touching “ ” (PLAY).
To enter the
REC mode
In the PLAY mode, touch “
”
(Show Icons). On the screen image
that appears, touch “ ” (REC).
[p] (Power)
“
”
(Show Icons)
. To turn off the camera
Screen after “
”
(Show Icons) is touched
Press [p] (Power).
“
” (PLAY) / “
” (REC)
NOTE
• To conserve battery power, an Auto Power Off
function will turn off power automatically if you do not
perform any operation for about five minutes.
29
Quick Start Basics
To Shoot a Snapshot
Your camera has a variety of different recording modes to suit various shooting
conditions and objectives (page 38). This section explains general shooting
procedures using the auto recording mode.
Selecting an Auto Recording Mode
You can select one of two auto recording modes (Auto or Premium Auto Pro)
according to your digital imaging needs.
Setting
Auto
Premium
Auto Pro
REC Screen
Icon Display
Description
This is the standard Auto recording mode.
With Premium Auto Pro recording, the camera
automatically determines whether you are shooting a
subject or scenery, and other conditions. Premium
Auto Pro recording delivers higher image quality than
standard Auto recording.
• Some of the settings configured automatically by
Premium Auto Pro cannot be changed by you.
• It also requires more power (and runs down the
battery quicker) than Auto.
1.
Press [p] (Power) to turn on the camera.
2.
Touch “
3.
Touch the second icon from the right (second
icon from the top in the case of portrait display
orientation) (Recording mode).
4.
Touch “Auto” or “Premium Auto Pro” to select
the auto recording mode you want.
” (Show Icons).
30
Recording mode icon
Quick Start Basics
To shoot a snapshot
1.
Point the camera at the subject.
If you are using Premium Auto Pro, text will appear on the
monitor screen describing the type of shot the camera has
detected.
• Spread your fingers apart on the screen to change the
zoom factor (page 45).
Type of shot
+ (Telephoto)
2.
– (Wide Angle)
Half-press the shutter button to focus
the image.
Shutter button
When focus is complete, the camera will
beep, the back lamp will light green, and
the focus frame will turn green.
Half-press
Press lightly until
the button stops.
Back lamp
Focus frame
Beep, beep (Image is in focus.)
When you half-press the shutter button, the camera
automatically adjusts exposure and focuses on the
subject it is currently pointed at. Mastering how
much pressure is required for a half-press and a
full-press of the shutter button is an important
technique for good-looking images.
31
Quick Start Basics
3.
Continuing to keep the camera still,
press the shutter button the rest of
the way down.
Full-press
This records the snapshot.
Snap (Image is recorded.)
Recording a Movie
Touch “ ” (Movie) to start movie recording. Touch
“ ” (Movie Stop) to stop recording.
See page 47 for details.
“
“ ” (Movie)/
” (Movie Stop)
NOTE
• You also can shoot a snapshot by touching a point on the monitor screen (page
56).
• You can specify the image size for snapshots. See page 58 for more information.
. If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the
image is not in focus (because the subject is too close, etc.). Re-point the camera at
the subject and try to focus again.
. Shooting with Auto
“Focus lock” (page 63) is the name of a technique you can use when you want to
shoot an image in which the subject to be focused on is not within the focus frame in
the center of the screen.
32
Quick Start Basics
. Shooting with Premium Auto Pro
• Some menu items are not available while Premium Auto Pro is in use (page 55).
Only the menu items whose settings can be configured will be displayed on the
menus while Premium Auto Pro is in use.
• In addition to shutter speed and ISO sensitivity, the camera automatically executes
the following operation as required when shooting with Premium Auto Pro.
– Auto Focus is normally performed until you half-press the shutter button.
– The camera automatically determines the focus point on the screen and focuses
there.
– When shooting people, the face detection feature detects the faces of up to ten
individuals and adjusts focus and brightness accordingly.
• When shooting with Premium Auto Pro, the message “Processing Premium Auto.”
may appear on the monitor screen. If you feel the camera is taking too long to
process data, try shooting with standard Auto instead.
• In some cases, Premium Auto Pro may not be able to interpret the shooting
environment correctly. If this happens, shoot with standard Auto.
• If “Š” is displayed, the camera will shoot a series of CS images and merge them
into a final image. Take care to avoid any camera and subject movement until
shooting of all of the CS images is complete.
Viewing Snapshots
Use the following procedure to view snapshots on the camera’s monitor screen.
• For information about how to play back movies, see page 64.
1.
Touch “
” (PLAY) to enter the PLAY mode.
“
” (PLAY)
This will display one of the snapshots currently stored in
memory.
• If “Premium Auto Pro” is selected as the recording
mode, touch the Review image (page 63) on the
monitor screen.
• Information about the displayed snapshot also is
included (page 10).
• You also can clear the information to view only the
snapshot (page 100).
• You can zoom the screen image by touching the
monitor screen (page 67).
If you are recording a snapshot that is very important to you, it is recommended
that you zoom the image and check its details after recording it.
33
Quick Start Basics
2.
Drag left or right across the screen image to scroll through the
snapshots.
NOTE
• Pressing the shutter button while in the PLAY mode or while a menu screen is
displayed will switch directly to the REC mode.
• A question mark (?) will be displayed for images that cannot be displayed for some
reason.
Deleting Snapshots and Movies
If memory becomes full, you can delete snapshots and movies you no longer need in
order to free up storage and record more images.
IMPORTANT!
• Remember that a file (image) delete operation cannot be undone.
. To delete a single file
1.
In the PLAY mode, drag left or right to display the file you want to
delete.
2.
Touch “
3.
Touch “
4.
Touch “Delete 1 File”.
” (Show Icons).
”.
This will delete the selected image.
34
Quick Start Basics
. To delete specific files
1.
Enter the PLAY mode.
2.
Touch “
3.
Touch “
4.
Touch “Delete Files”.
” (Show Icons).
”.
This displays a file selection screen.
5.
Touch a file you want to delete.
This will select the check box of the selected file’s image.
6.
After you are finished selecting files, touch “Delete”.
7.
Touch “Delete”.
This deletes the files you selected.
• To cancel the delete operation, touch “Cancel” in step 6.
NOTE
• You can also delete images using the image menu (page 67).
. To delete all files
1.
Enter the PLAY mode.
2.
Touch “
3.
Touch “
4.
Touch “Delete All Files”.
5.
Touch “Delete”.
” (Show Icons).
”.
This will cause the message “There are no files.” to appear.
35
Quick Start Basics
Snapshot Shooting Precautions
Operation
• If unwanted light is shining onto the lens, shade the lens with your hand when
shooting an image.
Monitor Screen when Shooting Snapshots
• Subject brightness conditions can cause monitor screen response to slow and can
cause digital noise in the monitor screen image.
• The image that appears on the monitor screen is for image composition. The actual
image will be recorded in accordance with the currently selected recording mode
(page 38).
Shooting Indoors under Fluorescent Lighting
• Minute flickering of fluorescent lighting can affect the brightness or color of an
image.
Other Precautions
• A noise reduction process is performed when ISO sensitivity is set to a high value.
This can cause the camera to take relatively longer to be ready to shoot again after
you press the shutter button. Do not perform any operation while the image
recording operation is in progress.
• Due to the characteristics of the imaging element used by the camera, very fast
moving objects in an image may appear distorted.
. Auto Focus Restrictions
• Any of the following can make proper focus impossible.
– Solid color wall or other very low contrast subject
– Strongly back lit subject
– Very shiny subject
– Blinds or other subject with a repeating horizontal pattern
– Multiple subjects at varying distances from the camera
– Subject in a dark location
– Camera movement while shooting
– Fast-moving subject
– Subjects outside the focus range of the camera
• If you cannot focus properly, try using focus lock (page 63).
36
Quick Start Basics
Recording Images
Touching the monitor screen in the REC mode will display a screen for configuring
REC mode settings.
. To configure REC mode settings
1.
Press [p] (Power) to turn on the camera and
enter the REC mode.
• If the camera is in the PLAY mode, touch “
to enter the REC mode.
” (REC)
[p] (Power)
2.
Touch “
3.
Touch the item whose setting you want to change.
” (Show Icons).
1Menu (page 55)*
2Recording mode (page 38)
3Remote capture (page 83)
4Mirror mode (page 44)
5PLAY mode (page 29)/
54321
Make-up (page 43)
6Movie (page 47)
7Send Last Shot icon (page 85)
6
7
* Depending on the recording mode, some of the items on the menu that
appears may not be usable.
37
Recording Images
Selecting a Recording Mode
The camera has a variety of different recording modes.
1.
In the REC mode, touch the “
Icons).
2.
Touch the recording mode icon.
3.
Touch the icon of the recording mode you want to
use.
” (Show
Recording mode icon
This enters the selected recording mode.
Auto
Standard Auto recording mode. This is the mode normally
used for shooting (page 30).
Premium Auto
Pro
With Premium Auto Pro recording, the camera
automatically determines whether you are shooting a
subject or scenery, and other conditions. Premium Auto
Pro recording delivers higher image quality than standard
Auto recording mode (page 30).
Posing Shot
Posing Shot lets you shoot five successive snapshots, as
the camera provides voice guidance (page 39).
BEST SHOT
With BEST SHOT, simply select the sample scene that
resembles the type of shot you want, and the camera
automatically configures ideal settings for the subject and
shooting conditions (page 50).
ART SHOT
A variety of artistic effects help to make even common,
ordinary subjects become more novel and exciting (page
40).
Make-up BKT
Make-up BKT lets you shoot three versions of the same
image with the press of the shutter button, each with a
different Skin Tone setting (page 42).
38
Recording Images
Shooting with Posing Shot (Posing Shot)
Posing Shot lets you shoot five successive snapshots, as the camera provides voice
guidance. The result is a series of shots with different poses and expressions.
1.
In the REC mode, touch the “
2.
Touch the recording mode icon.
3.
Touch “
4.
Press the shutter button to start recording.
” (Show Icons).
” (Posing Shot).
Shoot in accordance with the voice guidance from the camera.
NOTE
• To adjust the volume of the voice guidance, use the “Posing Vol” setting under
“Sounds” (page 101).
• To interrupt an ongoing Posing Shot operation, press the shutter button or touch
the monitor screen.
• Note that preview images are not displayed when shooting with this function.
. Changing the Voice Guidance Type
You can use the procedure below to select one of five types for the voice guidance
that sounds while you are shooting.
1.
Touch “
2.
Touch the number of the voice guidance you want to use.
” (Voice).
This will cause the corresponding voice to sound.
3.
After selecting the voice guidance type you want to use, touch “OK”.
39
Recording Images
Shooting with Artistic Effects (ART SHOT)
A variety of artistic effects help to make even common, ordinary subjects become
more novel and exciting.
Scene
Description
HDR Art
Uses HDR (High Dynamic Range, page 53) to turn normal
images into works of art.
Crystal Ball
Creates a mysterious effect by placing the image in a bubble
floating in midair.
Sparkling Shot
Softens the overall image and adds points of light for a
sparkle effect.
Toy Camera
Dark edges and altered hues make images look like they
were shot by a toy camera.
Soft Focus
Overall blurring for a soft and romantic effect.
Light Tone
Weakened contrast for a feeling of airy refinement.
Pop
Enhanced saturation makes colors stand out in with rich
clarity.
Sepia
Sepia tones create a decidedly retro look.
Monochrome
All of the strong contrast and graininess of a black and white
print.
Miniature
Partial blurring makes scenes look like they are from of a
miniature world.
Fisheye
A fisheye lens effect can be used to create a variety of
humorous images.
1.
In the REC mode, touch the “
2.
Touch the recording mode icon.
3.
Touch “C” (ART SHOT).
4.
Touch the ART SHOT scene you want to use.
” (Show Icons).
• Touch “ ”, “ ” to display another scene.
• Touching “ ” on the monitor screen and then touching a ART SHOT scene
will display detailed information about the scene.
40
Recording Images
5.
Touch the “ART” icon.
The intensity of the selected effect can be adjusted as described below. Note,
however, that the “Miniature” effect cannot be adjusted.
Scene
Adjustment
HDR Art
Effect level
Crystal Ball
Effect type
Sparkling Shot
Effect type
Toy Camera
Hue
Soft Focus
Effect level
Light Tone
Hue
Pop
Effect level
Sepia
Effect level
Monochrome
Effect level
Fisheye
Effect level
6.
Touch the level you want to select.
7.
Touch “OK”.
8.
Press the shutter button to shoot.
NOTE
• This function works best when the camera is made stationary by placing it on a
level surface, etc.
• With the HDR Art scene, the settings below are configured automatically.
– LED: Off
• Shooting with this REC mode makes the shooting range narrower than normal.
• The desired effect may not be attained if the camera or subject moves during
shooting.
• Depending on shooting conditions and image composition, this REC mode may not
be able to produce the desired result.
• Movie recording is disabled while shooting with ART SHOT.
• Sample images shown on ART SHOT scene screens were not shot with this
camera.
41
Recording Images
Shooting Three Versions of an Image with Different Skin Tone
Settings (Make-up BKT)
Make-up Bracketing (Make-up BKT) lets you shoot three versions of the same image
with the press of the shutter button, each with a different Skin Tone setting. This helps
you get the skin tone effect you want, even if you do not know exactly what settings to
use.
1.
In the REC mode, touch “
2.
Touch the Recording mode icon.
3.
Touch “
4.
Touch “
5.
Touch the “Skin Tone”, “Smooth Skin” values and change the levels as
desired.
” (Show Icons).
” (Make-up BKT).
” (Show Icons) and then touch “
Skin Tone
“Tan +6” to “0” to “Light +6”
Smooth Skin
“0 (Off)” to “+12 (Max.)”
6.
Touch “OK”.
7.
Press the shutter button to shoot.
” (Make-up).
This will shoot and store three versions of the same image with various “Skin
Tone” settings, based on the setting you selected in step 5, above.
NOTE
• After shooting an image with “Make-up BKT”, you will not be able to shoot another
image until save of the previous image is complete.
• Only two versions of the image will be shot and stored if you shoot with Make-up
BKT while “+6” is selected for “Skin Tone”.
• Movie recording is disabled while shooting with “Make-up BKT”.
42
Recording Images
Recording Beautiful Portraits (Make-up)
Make-up enables adjustment of human skin tone hues and texture, and softening of
facial shadows caused by harsh sunlight for better looking portraits.
• Make-up can be used with the recording modes listed below.
– Premium Auto Pro
– Posing Shot
– Motion Shutter (BEST SHOT)
– Make-up BKT
– Following BEST SHOT scene
Motion Shutter, Triple Shot, HS Night Scene Portrait
1.
Select “Premium Auto Pro”, “Posing Shot” or “Motion Shutter” for the
recording mode (pages 38, 50).
2.
Touch “
3.
Touch “
4.
Touch the screen and adjust “Skin Tone” and
“Smooth Skin”.
” (Show Icons).
” (Make-up).
Skin Tone
“Tan +6” to “0” to “Light +6”
Smooth Skin
“0 (Off)” to “+12 (Max.)”
5.
Touch “OK”.
6.
Press the shutter button to shoot.
Skin Tone
Smooth Skin
43
Recording Images
Using the Camera as a Mirror
You can use the procedure below to configure the camera so its
monitor screen acts as a mirror.
• Images cannot be recorded while in the Mirror Mode. Mirror
Mode image data is not saved in camera memory.
• The Mirror Mode can be entered only while the camera is
positioned in portrait (vertical) orientation. It cannot be
entered while the camera is in landscape (horizontal)
orientation.
1.
Rotate the monitor screen panel so the screen is
facing in the same direction as the lens (page 13).
2.
On your camera, enter the REC mode and then touch “
Icons).
3.
Touch the “
” (Show
” icon.
This enter the Mirror Mode.
. Mirror Mode Functions
Brightness
adjustment
Touch the “+” side or “–” side of “
Horizontal screen
image flip
Touch “ ”.
• Image flips to show how your face appears to others.
Screen image freeze
Touch “ ”.
• Freezes the image to make it easier to view in detail.
Zoom
Spread two fingers apart or squeeze then together on the
screen to zoom the image.
• Lets you move in on an image for greater detail.
Exit the Mirror Mode Touch “
”.
”.
• Brightness adjustment and horizontal screen image flip cannot be used while the
screen image is frozen.
44
Recording Images
Shooting with Zoom
Your camera is equipped with various types of zoom: HD Zoom, SR Zoom, and digital
zoom. The maximum zoom factor depends on the image size setting.
HD Zoom
Allows greater zoom capabilities by cutting out a portion of the
original image and enlarging it, without deterioration of image
quality.
SR Zoom
Applies super resolution technology to suppress image
deterioration.
Digital zoom
A digital process is used to enlarge the center of the image, so
there is deterioration of image quality.
1.
Perform the required screen operation to change the zoom factor as
desired.
Zoom in: Spread
Zoom out: Squeeze
Telephoto
Wide Angle
Telephoto : Enlarges the subject and narrows the range.
Wide Angle : Reduces the size of the subject and broadens the range.
2.
Press the shutter button to shoot the image.
NOTE
• Telephoto images are prone to blurring caused by camera movement when you
press the shutter button. Because of this, stabilizing the camera by placing it on a
level surface, etc. is recommended.
• Zoom operations are disabled during high speed movie recording. Perform the
zoom operation before you touch “ ” (Movie) to start recording.
• “Ù” is displayed on the monitor screen while digital zoom is being used.
45
Recording Images
. Zoom Factor
• The image deterioration point depends on the image size (page 58). The smaller
the image size, the higher the zoom factor you can use before reaching the image
deterioration point.
Image Size
Undeteriorated
Zoom Limit
Maximum
Zoom Factor
12M
1.5X
4.0X
3M
2.9X
7.8X
Shooting a Self-portrait
You can configure the camera so the monitor screen and lens
are facing in the same direction. This means you can shoot
with the self-timer as you compose the self-portrait on the
monitor screen.
• When using the self-timer to shoot a self-portrait, select one
of the following recording modes.
– Auto
– Premium Auto Pro
– Make-up BKT
1.
Rotate the monitor screen panel so the screen is
facing in the same direction as the lens (page 13).
2.
Select “Auto” or “Premium Auto Pro” for the
recording mode (page 30).
3.
Drag “ ” (Self-timer) downwards to specify the
self-timer countdown duration.
The camera will shoot an image when the countdown
reaches zero.
• You can set a self-timer countdown duration within
the range of two to ten seconds. The further you drag,
the longer the duration.
• To cancel an ongoing countdown, touch anywhere on
the screen except where the self-timer icon is
displayed.
• To cancel an ongoing countdown, touch anywhere on
the screen except where the self-timer icon is
displayed or press the shutter button.
46
Lens
Monitor screen
“
” (Self-timer)
Recording Images
To record a movie
The following procedure explains how to record a movie.
• You can record a movie while one of the following recording modes is selected.
– Auto
– Premium Auto Pro
– Following BEST SHOT scene
HS Night Scene, HS Night Scene Portrait, Food, Nails
1.
In the REC mode, touch “
2.
Touch “MENU”.
3.
Drag upwards and downwards until you find “Movie Quality”, and then
touch to select it.
4.
Touch the item whose setting you want to change.
Movie
Quality
Full HD
HD
HS240
5.
REC Screen Frame
Icon Display Rate
” (Show Icons).
Image Size
(Pixels)
Description
1920x1080
Select this setting to record full
high-definition (Full HD)
movies. The aspect ratio of
movies recorded with this
setting is 16:9.
30fps
1280x720
Select this setting to record
high-definition (HD) movies.
The aspect ratio of movies
recorded with this setting is
16:9.
240fps
512x384
Select this setting to record
high speed movies at a speed
of 240 fps.
• Audio is not recorded.
30fps
To close the menu screen, touch “MENU” or press the shutter button.
47
Recording Images
6.
Touch “
” (Movie).
This will start recording.
• Monaural audio is also recorded during movie
recording while “Full HD” or “HD” is selected for
the movie quality setting.
• Touching “o” while recording is in progress
will cause the remaining recording time and “R”
to appear. Touch “o” again to switch back to
the elapsed recording time.
• Zoom is supported during movie recording
when “Full HD” or “HD” is selected for the
movie quality setting (page 45).
• When “Macro” is selected as the movie focus
mode (page 62), you can half-press the shutter
button before starting recording to focus.
7.
Touch “
Recording time/
Remaining recording time
“
“
” (Movie)/
” (Movie Stop)
” (Movie Stop) to stop recording.
• Each movie can be up to 29 minutes long. Movie recording stops automatically
after 29 minutes of recording. Movie recording also will stop automatically if
memory becomes full before you stop movie recording.
Minimizing the Effects of Camera Movement during Movie Recording
You can configure the camera to minimize the effects of camera movement during
Full HD and HD movie recording. Note, however, that this does not prevent image
blur due to subject movement.
High Speed Movie Recording Precautions
• When shooting a high speed movie, shoot in a well-lit environment.
• When recording a high speed movie, light source flicker can cause horizontal
bands to appear in the image. This does not indicate malfunction of the camera.
48
Recording Images
IMPORTANT!
• Spending a long time using movie recording will cause the camera to become
slightly warm to the touch. This is normal and does not indicate malfunction. The
camera may automatically adjust its monitor screen brightness in order to reduce
heat generation.
• The camera also records audio along with Full HD and HD
movies. Note the following points when shooting a movie.
– Take care that the microphone is not blocked by your
fingers, etc.
– Good audio recording results are not possible when the
camera is too far away from what you are trying to
Microphone
record.
• Shooting movies for long periods in areas where
temperature is relatively high can cause digital noise (dots of light) to appear in the
movie image. A rise in the camera’s internal temperature also may force movie
recording to stop automatically. If this happens, stop recording and allow the
camera to cool down, which should cause normal operation to resume.
• Using the camera’s built-in memory or certain types of memory cards can slow
down processing speed. Whenever possible use an Ultra High-Speed Type
memory card. Note, however, that not all operations can be guaranteed even if an
Ultra High-Speed Type memory card is used. Certain movie quality settings can
result in too much time being required to record data, which can result in breaks in
the image and/or audio during playback. If this happens, the movie icon will turn
yellow on the monitor screen.
NOTE
• Except for High Speed Movie, zoom operations are supported during movie
recording (page 45). Zoom is disabled during high speed movie recording. If you
want to use zoom, perform the zoom operation before you touch “ ” (Movie) to
start recording.
• SR Zoom (page 45) is disabled during movie recording.
• The effects of camera movement in an image become more pronounced when you
shoot close up or with a large zoom factor. Because of this, stabilizing the camera
by placing it on a level surface, etc. is recommended.
• During High Speed Movie recording, focus is fixed at the position where it was
when recording started. To focus an image, half-press the shutter button for Auto
Focus before you touch “ ” (Movie) to start recording.
49
Recording Images
Using BEST SHOT
BEST SHOT provides you with a collection of sample “scenes” that show a variety of
different types of shooting conditions. When you need to change the setup of the
camera, simply find the scene that matches what you are trying to achieve, and the
camera sets up for it automatically. This helps to minimize the chance of ruined
images due to poor exposure and shutter speed settings.
. To shoot an image with BEST SHOT
1.
In the REC mode, touch “
(page 38).
2.
Touch the recording mode icon.
3.
Touch “b” (BEST SHOT).
” (Show Icons)
This will display a menu of BEST SHOT scenes.
4.
Touch the scene you want to select.
• Touching “ ” on the monitor screen and then touching a BEST SHOT scene
will display detailed information about the scene.
5.
Press the shutter button (if you are shooting a snapshot) or touch
“ ” (Movie) (if you are shooting a movie).
• With some BEST SHOT scenes, the message “Busy... Please wait...” will
appear on the monitor screen after you press the shutter button. The camera is
in the process of recording an image until the message appears. Keep the
camera still. The image processing operation takes some time to complete
after the message appears. You will not be able to record another image while
the message is displayed.
. BEST SHOT Precautions
• BEST SHOT scene images were not shot using this camera.
• Images shot using a BEST SHOT scene may not produce the results you expected
due to shooting conditions and other factors.
• You can modify the camera settings that are configured after you select a BEST
SHOT scene. Note, however, that the BEST SHOT settings revert to their defaults
when you select another BEST SHOT scene or turn off the camera.
• Movie recording can be performed while one of the BEST SHOT scenes below is
selected. Note that if “HS240” is selected for the movie quality setting, movies will
be recorded using the auto recording “Auto” setting.
HS Night Scene, HS Night Scene Portrait, Food, Nails
50
Using BEST SHOT
Shooting with Triple Shot
Triple Shot shoots a burst of three images and stores them in memory. This feature is
great for making sure you don’t miss those special moments when kids are around.
1.
Select “Triple Shot” scene (page 50).
2.
Point the camera at the subject and then half-press the shutter button.
The camera will start pre-recording images at this time.
• If you release the half-pressed shutter button before pressing it the rest of the
way down, all of the images currently in the pre-record buffer will be deleted.
3.
Press the shutter button all the way down to record.
This will record three images: one of the action before the shutter button is fully
pressed plus two real-time images.
• Pressing the shutter button all the way without first half-pressing it will result in
only two images being recorded.
NOTE
• The following functions cannot be used with this function.
Touch Shutter, Self-timer, Self-portrait check
• “Type 1” cannot be selected for the “Review” setting while shooting with this
function. If “Type 1” is selected in another mode, selecting the “Triple Shot” scene
will cause the “Review” setting to change to “Type 2”.
51
Using BEST SHOT
Using Motion Shutter to Trigger a Self-timer Operation
(Motion Shutter)
With Motion Shutter the camera automatically triggers a selftimer countdown whenever it detects subject movement within
an icon you specify on the monitor screen. This means you can
control operation of the self-timer from a distance by waving
your hand, so you can include yourself in the image being shot.
1.
Select “
2.
Drag the start self-timer icon “ ” and preview icon
“ ” to the location in the image where you want
movement to be detected.
” (Motion Shutter) scene (page 50).
• Keep the two icons separate from each other. Whenever you move an icon to a
location where it overlaps the other icon, the other icon will move out of the way
automatically.
3.
When everything is ready, press the shutter button all the way down.
The start self-timer icon will change to “
standby for shooting.
4.
” to indicate that the camera is in
Facing the camera, move your hand or perform some other movement
in the area of the start self-timer icon you positioned in step 3.
When the camera detects subject movement within the icon, it will automatically
start a self-timer countdown. The camera will shoot an image when the
countdown reaches zero, and then go back into Motion Shutter standby to wait
for the next trigger movement.
NOTE
• The trigger time of the Motion Shutter self-timer is fixed at two seconds.
• The preview icon “ ” will appear on the monitor screen when a snapshot is shot.
When the camera detects movement within the preview icon, it will display the
image that was shot for three seconds.
• Motion Shutter exits standby automatically after it shoots six images.
• To cancel Motion Shutter standby at any time, press the shutter button or touch the
monitor screen.
• The Motion Shutter may not operate properly when there is little difference
between the subject and the background of the icon, or when the subject is located
far away from the camera.
52
Using BEST SHOT
Digitally Correcting for Overexposure and Underexposure
(HDR)
With HDR (High Dynamic Range), the camera shoots a series of CS images using
different exposure settings and combines them into a final image to correct for
overexposure or underexposure of subjects of different brightness levels.
1.
Select “HDR” scene (page 50).
2.
Press the shutter button to shoot.
NOTE
• This function works best when the camera is made stationary by placing it on a
level surface, etc.
• With this BEST SHOT scene, the LED light setting automatically becomes off.
• The desired HDR effect may not be attained if the camera or subject moves during
shooting.
Shooting with High Speed Night Scene (HS Night Scene)
With High Speed Night Scene, the camera automatically detects shooting conditions.
When you press the shutter button, the camera will record a burst of images and
merge them in a way that minimizes image blur due to low light conditions.
1.
Select “HS Night Scene” scene (page 50).
2.
When you are ready to shoot, press the shutter button.
NOTE
• With this BEST SHOT scene, the LED light setting automatically becomes off.
• When holding the camera by hand while shooting with this BEST SHOT scene,
make sure that the subjects remain as still as possible as the camera shoots the
series of images.
• Movement of the camera while it is placed on a surface may cause erroneous
judgment that it is hand held.
• If surroundings are extremely dark when shooting with “HS Night Scene”, the
camera may not be able to shoot at proper brightness due to insufficient exposure.
• When shooting with this BEST SHOT scene, the ISO sensitivity setting is fixed at
“Auto”.
53
Using BEST SHOT
Shooting with High Speed Night Scene and Portraits
(HS Night Scene Portrait)
1.
Select “HS Night Scene Portrait” scene (page 50).
2.
When you are ready to shoot, press the shutter button.
NOTE
• With this BEST SHOT scene, the LED light setting automatically becomes “Auto”.
• When holding the camera by hand while shooting with this BEST SHOT scene,
make sure that the subjects remain as still as possible as the camera shoots the
series of images.
• Movement of the camera while it is placed on a surface may cause erroneous
judgment that it is hand held.
• If surroundings are extremely dark when shooting with this BEST SHOT scene, the
camera may not be able to shoot at proper brightness due to insufficient exposure.
• When shooting with this BEST SHOT scene, the ISO sensitivity setting is fixed at
“Auto”.
54
Using BEST SHOT
Advanced Recording Settings
The following are menu operations you can use to configure various camera settings.
Using the REC Menu
. Example Menu Screen Operation
1.
In the REC mode, touch “
2.
Touch “MENU”.
” (Show Icons).
This will display the menu screen.
• Menu contents are different in the REC mode and PLAY
mode.
3.
Drag upwards and downwards until you find the
item whose setting you want to change.
4.
Touch the item.
5.
Configure the setting of the item in accordance with the screen
contents.
• To cancel and exit the menu, touch “MENU” or press the shutter button.
NOTE
• Depending on the recording mode, some of the items on the menu that appears
may not be usable. While Premium Auto Pro is in use, only the menu items whose
settings can be configured will be displayed on the menus.
. Menu Operations in This Manual
Menu operations are represented in this manual as shown below. Touch the indicated
icons and items, and perform operations as they are indicated, from left to right.
Procedure
Enter the “REC Mode” * MENU * Touch Shutter
55
Advanced Recording Settings
Using Touch Shutter (Touch Shutter)
Procedure
Enter the “REC Mode” * MENU * Touch Shutter
You can use the procedure below to shoot a snapshot.
1.
Touch “On”.
2.
Point the camera at the subject.
3.
When you want to shoot, touch the monitor screen.
The camera automatically comes into focus and then shoots.
• You can still use the shutter button to shoot even when “On” is selected for
Touch Shutter.
NOTE
• When “Auto” is selected as the recording mode, the camera will automatically focus
on the point you touch.
• When “Premium Auto Pro” is selected as the recording mode, the camera will
automatically determine the optimum focus point(s) and focus automatically.
Using the Self-timer (Self-timer)
Procedure
Enter the “REC Mode” * MENU * Self-timer
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
Setting
REC Screen
Description
Icon Display
10 sec
10-second Self-timer
2 sec
2-second Self-timer
• When shooting under conditions that slow down the
shutter speed, you can use this setting to prevent
image blur due to camera movement.
Off
None
Self-timer is disabled.
• You can interrupt an ongoing Self-timer countdown by pressing the shutter button.
56
Advanced Recording Settings
NOTE
• The Self-timer configured with the above menu cannot be used under the following
conditions.
– Posing Shot (page 39)
– Triple Shot (page 51)
– Motion Shutter (page 52)
– When the monitor screen and lens are facing in the same direction
Using the LED Light (LED)
Procedure
Enter the “REC Mode” * MENU * LED
Use the LED light when shooting where lighting is dim. The effectiveness of the LED
light is reduced the further you are from the subject.
Setting
REC Screen
Description
Icon Display
Auto
The LED light fires automatically under dark shooting
conditions when the shutter button is half-pressed to
focus and/or full-pressed to shoot.
On
LED always lights when shooting.
Off
None
LED never turns on or fires.
IMPORTANT!
• Do not turn on the LED light near a person’s eyes and do not allow anyone to look
directly into the light.
• You should compose the image so the main subject is in the center of the image
when using the LED light.
• Since the camera is equipped with a wide-angle lens, the center tends to be
brighter while the periphery tends to be darker.
• LED light is disabled while shooting with the following feature.
– Following BEST SHOT scenes
Triple Shot, HDR, HS Night Scene
– Following ART SHOT scene
HDR Art
57
Advanced Recording Settings
Changing the Image Size (Image Size)
Procedure
Enter the “REC Mode” * MENU * Image Size
This setting can be used to configure snapshot image size.
Image Size
(Pixels)
Suggested Print
REC Screen
Size and
Icon Display
Application
Description
12M
(4000x3000)
Poster Print
Good detail for better clarity even
for images cropped from the
original on a computer, etc.
3M
(2048x1536)
3.5"×5" Print
Best when preserving memory
capacity is relatively more
important than image quality.
• The initial factory default image size setting is 12M (12 million pixels).
• Selecting “3:2” records images with an aspect ratio of 3:2, which matches the
standard aspect ratio of print paper.
. Pixels and image size
A digital camera image is a collection of small
Pixel
dots called “pixels”. The more pixels there are
in an image, the more detail there will be.
However, you generally can do with fewer
pixels when printing an image (L size)
through a print service, attaching an image to
e-mail, when viewing the image on a
computer, etc.
The size of an image indicates how many
pixels it contains, and is expressed as horizontal pixelsxvertical pixels.
• Note that larger images have more pixels, so they take up more memory space.
• For information about image size and number of images that can be stored, see
page 130.
• For information about movie image size, see page 131.
• For information about resizing existing snapshots, see page 77.
58
Advanced Recording Settings
Movie Image Quality Settings (Movie Quality)
Procedure
Enter the “REC Mode” * MENU * Movie Quality
This setting can be used to configure movie image quality settings and to select either
normal movie recording or High Speed Movie recording. For information about movie
image quality settings, see page 47.
Correcting Image Brightness (Brightness)
Procedure
Enter the “REC Mode” * MENU * Brightness
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3 EV
1.
Touch a level you want to set.
• To cancel exposure compensation, change the EV value to 0.0.
Decreases the EV value. A lower EV
value is best for dark-color subjects and
for shooting outdoors on a clear day.
2.
Increases the EV value. A higher EV
value is best for light-colored subjects
and backlit subjects.
Touch “OK”.
This applies the exposure compensation value. The exposure compensation
value you set remains in effect until you change it or turn off the camera (which
causes it to revert to “0.0”).
NOTE
• When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
59
Advanced Recording Settings
Adjusting White Balance (White Balance)
Procedure
Enter the “REC Mode” * MENU * White Balance
You can adjust white balance to match the source of light available where you are
shooting and avoid the blue cast that results when shooting outdoors when it is
cloudy, and the green cast that results when shooting under fluorescent lighting.
1.
Touch the type of white balance you want to select.
You can see the affect of the white balance setting you select on the monitor
screen.
Setting
Description
‡ Auto WB
Configures the camera to adjust white balance
automatically
¤ Daylight
For shooting outdoors on a clear day
' Overcast
For shooting outdoors on an overcast rainy day, in the
shade, etc.
“ Shade
For shooting on a clear day in the shade of trees or
buildings
† Day White Fl.
For shooting under white or day white fluorescent
lighting
– Daylight Fluor
For shooting under daylight fluorescent lighting
« Tungsten
For shooting under light bulb lighting
· Manual WB
For configuring the camera manually to suit a particular
light source.
Blank white paper
1Touch “· Manual WB”.
2In the location where you plan to
shoot, point the camera at a
blank white piece of paper so it
fills the entire monitor screen.
3Touch an area of the screen
where no icon is located.
The white balance setting is retained even if you turn
off the camera.
• When “‡ Auto WB” is selected for the white balance setting, the camera
automatically determines the white point of the subject. Certain subject colors
and light source conditions can cause problems when the camera tries to
determine the white point, which makes proper white balance adjustment
impossible. If this happens, select the white balance setting that matches your
shooting conditions (Daylight, Overcast, etc.).
2.
Touch “OK”.
60
Advanced Recording Settings
Specifying ISO Sensitivity (ISO)
Procedure
Enter the “REC Mode” * MENU * ISO
ISO sensitivity is a measure of sensitivity to light.
Setting
Description
Auto
Adjusts sensitivity automatically according to conditions
ISO 80
Lower
sensitivity
Slow shutter speed
Less noise
Fast shutter speed (Set
for shooting in dimly lit
areas.)
Some coarseness
(increased digital noise)
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
ISO 3200
Higher
sensitivity
• Since higher ISO sensitivity values tend to result in digital noise in images, the
camera performs a noise filtering process. Because of this, it may take relatively
longer for the camera to finish recording an image after it is shot. You will not be
able to perform any operation while image recording is in progress.
61
Advanced Recording Settings
Selecting a Focus Mode (Focus)
Procedure
Enter the “REC Mode” * MENU * Focus
Changing to a different focus mode can help to achieve better focus.
Settings
AF
(Auto
Focus)
Focus Mode
REC Screen
Type of Shot
Icon Display
Snapshot Movies
None
General
recording
Macro
Close ups
PF (Pan
Focus)
Shooting
with a
relatively
wide focus
range
Infinity
Scenery and
other distant
subjects
Approximate Focus Range*1
Snapshot
8 cm to
9 (infinity)
(3.1" to 9)
Automatic
Movies
52 cm to
9 (infinity)
(20.5" to 9)
8 cm to 50 cm 8 cm to 50 cm
Fixed (3.1" to 19.7") (3.1" to 19.7")*2
focal point
Fixed
focal point
Fixed
1 m to
9 (infinity)
(3.3' to 9)
52 cm to
9 (infinity)
(20.5" to 9)
Infinity (Wide Angle)
*1 The focus range is the distance from the lens surface.
*2 Focus remains fixed at the position where it was when recording started. To focus
an image, half-press the shutter button to focus before fully pressing the shutter
button to start recording.
62
Advanced Recording Settings
Using Focus Lock
Subject to be focused on
“Focus lock” is a technique you can use when you want
to compose an image in which the subject you want to
focus on is not within the focus frame in the center of
the screen.
1.
Align the monitor screen’s focus frame with
the subject you want to focus on and then
half-press the shutter button.
Focus frame
2.
Keeping the shutter button half-pressed
(which maintains the focus setting), move
the camera to compose the image.
3.
When you are ready to shoot the image,
press the shutter button the rest of the way
down.
NOTE
• Focus lock also locks exposure (AE).
• The focus frame does not appear on the display when the Touch Shutter is
enabled (On).
Turning on Image Review (Review)
Procedure
Enter the “REC Mode” * MENU * Review
While Review is turned on, the camera will display an image immediately after it is
recorded.
Type 1
Displays a full-screen view of the image for about one second.
Type 2
Displays a Review image in the upper left corner (in the case of a
portrait orientation image) or the lower left corner (in the case of a
landscape orientation image) of the monitor screen. Touching the
Review image will enter the PLAY mode and display a full-screen view
of the image.
Off
Turns off review image display
• When “Type 1” is selected, the aperture, shutter speed, and ISO sensitivity, will be
red if the Auto Exposure is not correct.
63
Advanced Recording Settings
Viewing Snapshots and Movies
Viewing Snapshots
See page 33 for the procedure for viewing snapshots.
Viewing a Movie
1.
Touch “
2.
Drag left or right across the screen image to
scroll through the movies until the one you
want is displayed.
” (PLAY) to enter the PLAY mode.
Image quality
Movie icon:
Movie recording time
3.
Touch “
” (Movie) to start playback.
Playback in progress
Playback paused
Touch “|”.
Touch “6”.
Progress bar
64
Viewing Snapshots and Movies
Movie Playback Controls
Pause/Play
Touch “|” (pause) or “6” (play).
Fast forward/
Fast reverse
During playback, touch “{” (fast reverse) or “}” (fast
forward).
• Each touch of either button increases the speed of the
fast forward or fast reverse operation.
• To return to normal playback speed, touch “6”.
Stop playback
During playback, touch “.”.
Volume adjustment
During playback, touch “n” and then drag the volume bar
to the desired level.
• Volume can be adjusted only while movie playback is in
progress.
1 frame forward/
back
While playback is paused, touch “z” or “y”.
• Touching and holding this icon advances frames
continuously.
Information display
on/off
Touch the screen.
Movie editing
Pause movie play at the location where you want to cut,
and then touch “~” (page 66).
• Playback may not be possible for movies not recorded with this camera.
65
Viewing Snapshots and Movies
Editing a Movie on the Camera (Movie Editing)
The Movie Editing feature lets you cut out a specific part of a movie.
1.
Enter the PLAY mode and then start playback of the movie you want to
edit.
2.
When playback reaches the location where you want to cut, touch “|”
to pause.
3.
Touch “~”.
4.
Touch the option that specifies what you want to cut.
5.
¡ Previous Cut
Cuts everything from the beginning of the movie up to
the current location.
¢ Next Cut
Cuts everything from the current location to the end of
the movie.
Touch “Cut”.
The selected cut operation will take considerable time to complete. Don’t try to
perform any camera operation until the “Busy... Please wait...” message
disappears from the monitor screen. Note that a cut operation can take a long
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The original movie is not retained.
An editing operation cannot be undone.
NOTE
• A movie that is shorter than five seconds cannot be edited.
• Editing of movies recorded with a different type of camera is not supported.
• You will not be able to edit a movie if the amount of remaining memory capacity is
less than the size of the movie file you want to edit. If there is not enough memory
available, delete files you no longer need to free up more.
• Splitting of a movie into two movies and splicing of two different movies into a
single movie are not supported.
66
Viewing Snapshots and Movies
Viewing the Image Menu
The image menu shows multiple images on a single screen.
1.
In the PLAY mode, touch “]” or squeeze your
fingers on the screen.
This displays the image menu.
• Drag upwards or downwards to scroll to the next page of
images.
• To view the normal (single image) display mode, touch
the image your want to view.
• In the case of a movie, the first image in the movie is
displayed.
• A question mark (?) will be displayed for images that cannot be displayed for
some reason.
• You can also perform the operations below using the image menu. Touch the
icon of the function you want to use, touch an image, and then touch “OK”.
– Send an image to a smartphone
– Delete an image
– Protect an image
Zooming an On-screen Image
Snapshots can be zoomed on the monitor screen up to 8X.
• The actual available zoom factors depend on the size of the original image.
1.
In the PLAY mode, drag left or right to display the image you want to
view.
2.
Spread your thumb and forefinger (page 17) on the displayed image to
enlarge it.
• Dragging an enlarged screen image will change the part of the image that is
displayed.
• Squeezing your thumb and forefinger (page 17) on the displayed image will
reduce it in size.
– When monitor screen contents are turned on, a graphic on the monitor
screen shows what part of the zoomed image is currently displayed.
67
Viewing Snapshots and Movies
Viewing Snapshots and Movies on a TV Screen
Use a commercially available HDMI cable to
connect the camera to the TV.
• Use a commercially available HDMI cable
that is marked with the logo shown to the
right.
1.
Open the frame (page 13).
2.
Hook your nail into the groove of the
[HDMI] cover and pull the cover in the
direction indicated by the arrow to open
it.
3.
Turn off the camera and use a
commercially available HDMI cable to connect the camera to a TV.
[HDMI] cover
HDMI connector
HDMI input
HDMI output (micro)
HDMI micro connector
HDMI cable
(commercially
available)
• Make sure that the camera is turned off before plugging in or unplugging the
cable. Check the user documentation that comes with the TV for information
about requirements before plugging into or unplugging from the TV.
4.
Turn on the TV and select its HDMI input mode.
If the TV has more than one HDMI input, select the one where the camera is
connected.
68
Viewing Snapshots and Movies
5.
Turn on the camera.
The camera monitor screen will shows a remote controller image. The TV screen
will show a recorded image.
• The contents of the remote controller image will depend on the type of image
that is displayed on the TV screen.
6.
Touch the camera monitor screen to perform operations.
NOTE
• Use a HDMI cable with a plug that is compatible with the camera’s HDMI micro
connector on one end, and a plug that is compatible with your TV’s HDMI
connector on the other end.
• Proper image and/or audio output and other operations may not be possible with
some devices.
• Connecting the camera to the HDMI connector of another device can damage both
the camera and the other device. Never connect two HDMI output connectors to
each other.
• Disconnect the HDMI cable when you are not using HDMI output. The camera’s
monitor screen may not operate normally while the HDMI cable is connected.
• Audio is monaural.
• Audio is initially output by the camera at maximum volume. When you first start
displaying images, set the TV volume control at a relatively low level and then
adjust it as required.
• To select the digital signal format, see page 105.
69
Viewing Snapshots and Movies
Other Playback Functions (PLAY)
The following are menu operations you can use to configure various camera settings.
Using the PLAY Menu
. Example Menu Screen Operation
1.
In the PLAY mode, touch “
2.
Touch “MENU”.
” (Show Icons).
This will display the menu screen.
• Menu contents are different in the REC mode and PLAY
mode.
3.
Touch the item whose setting you want to change.
4.
Configure the setting of the item in accordance with
the screen contents.
• To cancel and exit the menu, touch “MENU” or press the shutter button.
. Menu Operations in This Manual
Menu operations are represented in this manual as shown below. Touch the indicated
icons and items, and perform operations as they are indicated, from left to right.
Procedure
Enter the PLAY Mode * MENU * Protect
Creating a Promotion Movie (Promotion Movie)
Procedure
Enter the PLAY Mode * Display snapshot * MENU *
Promotion Movie
With this function, you can select five snapshots and combine them into a 6-second
or 15-second movie that includes effects and music.
1.
Drag upwards or downwards to display the snapshot you want to use
in your Promotion Movie.
2.
Touch the snapshot you want to use as the first image.
70
Other Playback Functions (PLAY)
3.
Repeat steps 1 and 2 to select a total of five snapshots.
• The snapshots will appear in the Promotion Movie in the same sequence that
you select them.
• Touch a selected snapshot will de-select it.
4.
Touch “OK”.
5.
Touch “Length”, “Transition”, and “Music”, and configure settings for
each item as required.
6.
Length
Select 15 seconds or 6 seconds.
Transition
Enable or disable the transition effect. Selecting “On” (enabled)
applies a transition effect when changing from one image to the
next.
Music
Select the background music you want to use. Selecting “Off”
creates a movie without music.
Touch “Create”.
This creates a Promotion Movie in accordance with the settings you configured.
NOTE
• Movies cannot be converted to a promotion movie.
• You may experience conversion problems if you try to include snapshots recorded
with a camera other than this one.
• Promotion movies are HD movie quality, with an aspect ratio of 16:9. This means
that the upper and lower parts of a snapshot will be trimmed off when it is
converted to a promotion movie.
• Selecting a portrait orientation snapshot with the “Transition” setting enabled (On)
will trim the top and bottom of the image, with the bottom portion somewhat larger
than the top. When “Transition” is disabled (Off), black bands will appear on the
sides of the image.
• This function cannot be used for fewer than five images.
71
Other Playback Functions (PLAY)
Performing Paint Operations on an Image (Paint)
Procedure
Enter the PLAY Mode * Display snapshot * MENU * Paint
You can use this function to draw on, write on, or stamp information into a recorded
snapshot. If the original image size is 3M or larger, the post-paint image is saved as a
3M size image.
1.
On the monitor screen, touch “
2.
Touch the pen type or the stamp you want to use.
3.
Use the pen to write text or draw figures, or use the stamp to stamp
information.
” or “
”.
• The stamp will be located at the final position your finger is in when you remove
it from the screen. Before removing your finger, you can drag the stamp to the
location you want.
4.
Touch “OK”.
5.
Touch “Yes”.
This will save the image as a new image.
. Paint Functions
Exits paint without saving an image.
For selecting the pen color and thickness for drawing or writing. Also
can be used to select the eraser and its thickness.
For selecting the stamp type.
Goes back to the previous screen.
Saves the image.
NOTE
• After selecting “ ”, you can change either the color (or eraser) or thickness
setting only. To change the other setting, select “ ” again.
72
Other Playback Functions (PLAY)
Playing a Slideshow on the Camera (Slideshow)
Procedure
Enter the PLAY Mode * MENU * Slideshow
You can use the slideshow mode to automatically scroll through all of the images in
camera memory.
NOTE
• All operations are disabled while the slideshow is transitioning from one image to
another.
• The time required for transition from one image to another may be longer in the
case of an image that was not recorded with this camera.
• To return to normal (single image) display, touch the screen.
Extracting an Image from a Snapshot (Cut out subject)
Procedure
Enter the PLAY Mode * Display snapshot * MENU * Cut out subject
You can draw an outline around a subject (person or object) and extract it from the
snapshot. You can then insert the extracted subject into another snapshot.
Extracted Subject
1.
Another Snapshot
Final Combined Image
Touch the drawing tool you want and then draw a boundary around the
subject that you want to extract.
Drawing Tool
Line Type
•
Thin
‚
Thick
„
–
Description
Draws a line for cutting out a subject.
Erases a drawn line.
• The boundary line should be continuous, which means it starts and ends at the
same point.
73
Other Playback Functions (PLAY)
2.
Touch “OK”.
This will cause the background of the subject you outlined to become gray.
3.
Touch “
” to select the area to be extracted and then touch “OK”.
This will display the cut out subject.
• To scroll back one screen, touch the “
Extracted subject screen
4.
” icon on the monitor screen.
Original image with subject
extracted
After confirming that the part of the image to be extracted is the way
you want, touch “OK”.
This saves the extracted image.
NOTE
• You cannot extract from an extracted subject. Attempting to do so will cause an
error.
74
Other Playback Functions (PLAY)
Inserting a Subject into another Snapshot or Adding a Built-in
Frame to a Snapshot (Paste subject)
Procedure
Enter the PLAY Mode * MENU * Paste subject
You can add the camera’s built-in characters or frames to snapshots, or you can
insert characters you create with “Cut out subject” (page 73) into snapshots.
• Only an image that satisfies the following conditions can be used as a background
image.
– It must be a snapshot recorded with this camera or a snapshot transferred to this
camera’s memory.
– It must be an image with an aspect ratio of 4:3.
1.
Drag left or right to scroll through images. Select image you want to
use as the background and then touch “OK”.
2.
Drag left or right to scroll though subjects. Select the subject you want
to insert and then touch “OK”.
3.
Touch “–” (zoom out), “+” (zoom in) to adjust the
size of the subject. You also can drag the subject
around the screen to reposition it.
4.
After the subject’s size and position are the way you
want, touch “OK”.
This inserts the subject into the background image.
NOTE
• Performing a delete or format operation will not delete the built-in subjects.
75
Other Playback Functions (PLAY)
Protecting a File Against Deletion (Protect)
Procedure
Enter the PLAY Mode * MENU * Protect
You can protect images to prevent them from being deleted.
• A protected image will be indicated by “›”.
All Files On
Protects all files.
All Files Off
Unprotects all files.
Select
Protects and unprotects specific files.
1Drag upwards or downwards to display the image you want
to protect.
2Touch an image to be protected, and
“›” will appears on the image.
You can repeat steps 1 and 2 as
many times as necessary to select
multiple images.
3Touch “OK”.
To unprotect an image, touch it in step
2 of the above procedure to remove
“›”.
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 107).
NOTE
• You can also protect images using the image menu (page 67).
76
Other Playback Functions (PLAY)
Rotating an Image (Rotation)
Procedure
Enter the PLAY Mode * MENU * Rotation
1.
Drag upwards or downwards to display the image you want to rotate.
2.
Touch “
”.
This will rotate the image 90 degrees to the left.
3.
When the image is in the orientation you want, touch “
”.
NOTE
• Note that this procedure does not actually change the image data. It simply alters
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
Resizing a Snapshot (Resize)
Procedure
Enter the PLAY Mode * MENU * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot.
The original snapshot is also retained. You can select resize an image to one of two
image sizes: 3M, VGA.
1.
Drag left or right to display the image you want to resize.
2.
Touch a size.
This resizes the image to the selected size and saves the result as a new
photograph.
NOTE
• The recording date of the resized version of the snapshot will be the same as the
recording date of the original snapshot.
77
Other Playback Functions (PLAY)
Cropping a Snapshot (Trimming)
Procedure
Enter the PLAY Mode * MENU * Trimming
You can crop a snapshot to trim parts you do not need, and save the result in a
separate file. The original snapshot is also retained.
1.
Drag left or right to display the image you want to crop.
2.
Touch “OK”.
3.
Drag the image until the part you want to keep is displayed.
• To enlarge the image, touch the screen with your thumb and forefinger and
then spread them apart. To reduce the size of the image, touch the screen with
your thumb and forefinger and then squeeze them together.
4.
Touch “OK”.
This will crop the image, leaving only the displayed part.
NOTE
• The recording date of the cropped image will be the same as the recording date of
the original snapshot.
78
Other Playback Functions (PLAY)
Establishing a Wireless LAN Connection
Wireless LAN Functions
Establishing a wireless LAN connection between the camera and a smartphone
enables the functions described below.
With this function:
See
page:
You can do this:
Remote Capture*
Remotely control and shoot with the
camera using a smartphone.
83
Send a snapshot that was just recorded
with the camera to a smartphone. After
sending an image to a smartphone, you
can then upload it to a social networking
service.
85
Send snapshots and movies recorded
with your camera to your smartphone.
After sending an image to a smartphone,
you can then upload it to a social
networking service.
86
Use a smartphone or computer to view
and download snapshots and movies
stored in camera memory.
88
Send Last Shot*
Send to phone*
View on phone
* Requires installation of the EXILIM Remote app on your smartphone.
79
Establishing a Wireless LAN Connection
IMPORTANT!
• Never use wireless LAN functions inside an aircraft or anywhere else where such
operation is restricted.
• Some smartphone models may not be able to play back movie files that are sent to
the smartphone.
• Depending on your smartphone model, its operating system version, and/or its
remaining storage capacity can cause failure of a movie or snapshot save
operation. After send operation, perform the required operation on your
smartphone to ensure that the movie or snapshot was saved properly.
• Viewing a movie received on an Android terminal:
Note that movies are not displayed by Gallery. Movies are stored in a folder named
“EXILIM Remote”. A separate movie player is required to playback movies (whose
files have the file name extension MOV). Depending on your movie player, you
may not be able to playback movies and/or audio.
• Attempting to use a memory card that includes a wireless function with this camera
can cause abnormal operation.
NOTE
• Note that using wireless LAN functions requires more battery power usage than
normal. Make sure that the camera battery is sufficiently charged before starting a
wireless LAN operation.
• The operating range depends on the local communication environment and on the
type of smartphone you are connected to.
80
Establishing a Wireless LAN Connection
Establishing a Connection between a Smartphone and Your
Camera
Installing the EXILIM Remote Smartphone app on your smartphone makes it possible
to remotely control the camera from your smartphone and to send images recorded
with the camera to your smartphone. Use your smartphone to visit the EXILIM app
site (http://www.casio.com.cn/dc/app/) and install the EXILIM Remote app.
. App operation guarantees
No guarantees are made concerning the ability to operate the EXILIM Remote app on
any particular smartphone or tablet.
IMPORTANT!
• Information about operating system versions supported by EXILIM Remote can be
found at the app download site.
• App functions and the required operating environment are subject to change
without notice.
Installing the EXILIM Remote App on Your Smartphone
. Android terminal
Visit the Exilim remote Website at the URL provided above.
. iPhone
Visit the Exilim remote Website at the URL provided above.
81
Establishing a Wireless LAN Connection
Configuring Wireless LAN Settings
Use the procedure below to establish a wireless LAN connection between the camera
and a smartphone for the first time. This operation is required for the first connection
only.
1.
On your camera, enter the REC mode and then touch “
Icons).
2.
On your camera, touch the “
Capture) icon.
” (Show
” (Remote
This will enable connection with a smartphone and the
camera will display a screen for input of an SSID and
password.
3.
For the smartphone Wi-Fi setting, input the
camera SSID and password.
SSID
When the message “Start up the phone app.” appears on
the camera’s monitor screen, it means that the
password
smartphone has established a wireless connection with
the camera.
• To break the wireless connection, touch “Cancel”.
• What you need to do to establish a wireless LAN connection depends on the
type of smartphone you are using. For details about how to establish a wireless
LAN connection see the user documentation that comes with your smartphone.
82
Establishing a Wireless LAN Connection
Using a Smartphone as a Camera Remote Controller
(Remote Capture)
This function lets you remotely shoot a snapshot or movie with the camera using a
smartphone. You also can perform remote zoom, self-timer, and other operations as
well.
1.
On your camera, enter the REC mode and then touch “
Icons).
2.
On your camera, touch the “
3.
On your smartphone, start up the EXILIM Remote app.
” (Show
” (Remote Capture) icon.
This will establish a connection between the smartphone and your camera.
• About 60 seconds after your camera establishes a connection with the
smartphone, the camera’s monitor screen will go blank and its back lamp will
light green.
• If the message “Connect your phone to the access point below.” remains on
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your
camera is selected for connection (page 82).
4.
Compose the image on your smartphone’s screen as you shoot.
• After you are finished using Remote Capture, touch “Exit” on the camera or exit
the app on your smartphone.
IMPORTANT!
• For snapshots, Premium Auto Pro is automatically selected as the recording mode
while shooting with Remote Capture. You cannot shoot with BEST SHOT or other
recording modes.
• The Movie Quality is always STD (640x480) when shooting with Remote Capture.
83
Establishing a Wireless LAN Connection
. Controlling Your Camera with a Smartphone
EXILIM Remote supports the Remote Capture operations listed below. This manual
explains EXILIM Remote operations based on screens that appear using the iPhone
version. Some operations may differ depending on your smartphone type.
2
3
1
bk
4
9
8
7
5
6
1 Exits Remote Capture.
2 Select to configure self-timer and LED light
settings for snapshot shooting.
The Remote Capture self-timer countdown time is
10 seconds (fixed).
3 Displays current LED light settings.
4 Displays what is being picked up by the camera’s
lens.
5 Performs a zoom operation.
6 Toggles between snapshot and movie shooting.
7 Shoot a snapshot or start movie recording.
8 Sends the snapshot that was just recorded to the
smartphone.
9 Displays location information settings.
bkDisplays current self-timer settings.
Location Information
You can use 8 to add location information to snapshots shot with Remote Capture
when they are sent to a smartphone. On an Android terminal, select 2 “Options” on
the Remote Capture screen. On an iPhone, perform the following operation:
“Settings” * “Privacy” * “Location Services”.
IMPORTANT!
• Enabling location-based services causes the recording date, location information,
and other personally identifiable information to be included in the snapshot data.
Take care when sharing or publishing such images on web services, etc.
84
Establishing a Wireless LAN Connection
Sending a Just-recorded Snapshot to a Smartphone
(Send Last Shot)
You can use Send Last Shot to send a snapshot you just recorded with the camera to
a smartphone. After sending an image to a smartphone, you can then upload it to a
social networking service.
• Note that you will not be able to use Send Last Shot to send a snapshot to a
smartphone if you performed any one of the operations below after recording the
snapshot.
– Exiting the REC mode to the PLAY mode or turning off the camera
– Resetting the camera (page 107) or formatting camera memory (page 107)
– Selecting Remote Capture
– Performing a movie recording operation
1.
On the camera, enter the REC mode and shoot the snapshot.
2.
Touch the “
3.
Touch “Send”.
4.
On your smartphone, start up the EXILIM Remote app.
” (Send Last Shot) icon.
This will establish a connection between your camera and the smartphone, and
send the snapshot you just recorded to the smartphone.
• If the message “Connect your phone to the access point below.” remains on
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your
camera is selected for connection (page 82).
5.
After image send is complete, perform one of the operations described
below.
“Preview photo in Scene app”: You can use the Scene app* on the smartphone to
view the sent images.
“Send to SNS”: Display the social networking service upload screen.
“To TOP Panel”: Return to the TOP screen.
* The Scene app is an image management app by ripplex inc. It makes it
possible to display images at high speed and to share albums with friends. If
you don’t want to use the Scene app, tap “Settings” in the upper right corner of
the EXILIM Remote TOP screen, and then select “Off” for “Launch Scene
Application”.
NOTE
• You can specify the size of the image sent to the smartphone using “Resize before
send” (page 87).
• You can use the smartphone apps below to view snapshots after sending them.
– iPhone: Camera Roll
– Android terminal: Gallery or another photo browser app
85
Establishing a Wireless LAN Connection
Sending a Snapshot or Movie File from Camera Memory to a
Smartphone (Send to phone)
You can select one more snapshot and/or movie file in camera memory and send it to
a smartphone. You can select up to 100 files, totaling no more than 500MB for a
single send. After sending an image to a smartphone, you can then upload it to a
social networking service.
1.
On the camera, touch “
2.
Touch “
3.
Touch the “
4.
Touch “
5.
Touch the images of the files you want to send to the smartphone.
” (PLAY) to enter the PLAY mode.
” (Show Icons).
” (Image Send) icon.
” (Send to phone).
Touching the image of a file causes its check box to become selected.
6.
After selecting the images of all of the files you want to send to the
smartphone, touch “OK”.
7.
On your smartphone, start up the EXILIM Remote app.
This will establish a connection between your camera and the smartphone, and
send the files to the smartphone.
• If the message “Connect your phone to the access point below.” remains on
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your
camera is selected for connection (page 82).
8.
After image send is complete, perform one of the operations described
below.
“Preview photo in Scene app”: You can use the Scene app* on the smartphone to
view the sent images.
“Send to SNS”: Display the social networking service upload screen.
“To TOP Panel”: Return to the TOP screen.
* The Scene app is an image management app by ripplex inc. It makes it
possible to display images at high speed and to share albums with friends. If
you don’t want to use the Scene app, tap “Settings” in the upper right corner of
the EXILIM Remote TOP screen, and then select “Off” for “Launch Scene
Application”.
86
Establishing a Wireless LAN Connection
NOTE
• You can specify the size of the snapshots sent to the smartphone using “Resize
before send” (page 87).
• You can use the smartphone apps below to view snapshots after sending them.
– iPhone: Camera Roll
– Android terminal: Gallery or another photo browser app
Resizing Snapshots before Sending Them to a Smartphone
(Resize before send)
Procedure
MENU * Setup * Resize before send
This feature can be use to resize snapshots before they are sent to a smartphone
using “Send Last Shot”, “Remote Capture”, or “Send to phone”.
3M
Images are converted to 3M size before being sent.
• If an original image is 3M size or smaller, it is sent without
resizing.
Off
Images are sent in the size they were originally recorded.
87
Establishing a Wireless LAN Connection
Viewing Snapshots and Movies in Camera Memory on a
Smartphone (View on phone)
You can use this function to enable up to eight smartphones and/or computers to
access snapshots and movies in camera memory for viewing and download. A
smartphone does not need to have the EXILIM Remote app installed in order to
access camera images using this function.
1.
On the camera, touch “
2.
Touch “
3.
Touch the “
4.
Touch “
” (PLAY) to enter the PLAY mode.
” (Show Icons).
” (Image Send) icon.
” (View on phone).
This establishes a connection between the smartphone and camera, and displays
a URL.
• If the message “Connect your phone to the access point below.” remains on
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your
camera is selected for connection (page 82).
• After about 60 seconds, the camera’s monitor screen will go blank. Touching
the monitor screen will cause its image to reappear.
5.
On the smartphone, start up its browser app.
• The browser will automatically access the URL displayed by the camera in
step 3 of this procedure, and then display an image stored in camera memory.
• If no camera image appears automatically, manually input the URL into the
browser.
URL: http://exilim.remote/
• To exit the wireless LAN function, touch “Exit” on the camera’s monitor screen.
IMPORTANT!
• Some smartphone models may not be able to play back movie files.
NOTE
• You can also view image in camera memory on a computer’s browser by
establishing a wireless LAN connection with the computer.
88
Establishing a Wireless LAN Connection
Printing
Professional Print Service
You can take a memory card that contains the images you want
to print to a professional print service and have them printed.
Printing on a Home Printer
You can use a printer equipped with a memory card slot
to print images directly from a memory card. For details,
see the user documentation that comes with your
printer.
Printing with a Computer
After transferring the images to your computer, use
commercially available software to print.
Printing with a Computer
There are a variety of different ways to print images stored on a computer. This
section shows one standard printing example.
. Printing on a Windows Computer
1.
Use the procedure under “Viewing and Storing Images on a Computer”
(page 92) to store the image you want to print, and then display the
image on your computer screen.
2.
Click “Print” and then “Print”.
3.
Configure the desired print settings and then click “Print”.
89
Printing
. Printing on a Macintosh
1.
Use the procedure under “Connecting the Camera to Your Computer
and Saving Files” (page 95) to store the image you want to print, and
then display the image on your Macintosh screen.
2.
Click “File” and then “Print”.
3.
Configure print settings and then click “Print”.
This will print the selected image.
90
Printing
Using the Camera with a Computer
Things you can do using a computer...
You can perform the operations described below while the camera is connected to a
computer.
Save images to a
computer and
view them there
• Save images and view them manually
(USB connection) (pages 92, 95).
Play back and
edit movies
• You can play back movies (pages 94, 97).
• To edit movies, use commercially
available software as required.
The procedures you need to perform are different for Windows and the Macintosh.
• Windows users should refer to “Using the Camera with a Windows Computer”
on page 91.
• Macintosh users should refer to “Using the Camera with a Macintosh” on page
95.
Using the Camera with a Windows Computer
When you
want to do
this:
Operating
System Version
Required Software:
Save images
to a computer
and view them
there manually
Windows 8.1,
Windows 8,
Windows 7,
Windows Vista
Installation not required.
92
Play movies
Windows 8.1,
Windows 8,
Windows 7,
Windows Vista
QuickTime 7
• You need to download QuickTime 7 on
the Web if you want to use it.
94
91
See
page:
Using the Camera with a Computer
Viewing and Storing Images on a Computer
You can connect the camera to your computer in order to view and store images
(snapshot and movie files).
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially
available card reader to access image files directly from the camera’s memory
card. For details, see the user documentation that comes with your computer.
. To connect the camera to your computer and save files
1.
Turn off the camera and then
use the micro USB cable that
comes with the camera to
connect it to your computer.
[USB] port
USB
• For details about connecting to
the camera and precautions
when connecting, see page 22.
Micro USB cable
(included with camera)
2.
Press [p] (Power) to turn on the camera.
When you turn on the camera, check to make sure that the color of its back lamp
changes from red to green or amber (page 23). Note that in this case the monitor
screen will remain blank.
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and
then reconnect the USB cable.
3.
Windows 8.1, Windows 8 users: Click “Desktop” and then “Explorer”.
Windows 7, Windows Vista users: Click “Start” and then “Computer”.
92
Using the Camera with a Computer
4.
Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in
memory if there is no card) as a removable disk.
5.
Right-click the “DCIM” folder.
6.
On the shortcut menu that appears, click “Copy”.
7.
Windows 8.1, Windows 8 users: Click “Documents”.
Windows 7, Windows Vista users: Click “Start” and then “Documents”.
• If you already have a “DCIM” folder in “Documents”, the next step will overwrite
it. If you want to keep the existing “DCIM” folder, you need to change its name
or move it to a different location before performing the next step.
8.
Windows 8.1, Windows 8 users: On the “Documents” menus, click
“Home” and then “Paste”.
Windows 7, Windows Vista users: On the “Documents” menu, click
“Organize” or “Edit”, and then “Paste”.
This will paste the “DCIM” folder (and all the image files it contains) into your
“Documents” folder. You now have a copy of the files that are in camera memory
on your computer.
9.
After you finish copying images, disconnect the camera from the
computer.
On the camera, press [p] (Power) to turn off the camera. After checking to make
sure that the back lamp is unlit or lit red, disconnect the USB cable.
. To view images you copied to your computer
1.
Double-click the copied “DCIM” folder to open it.
2.
Double-click the folder that contains the images you want to view.
3.
Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 99.
93
Using the Camera with a Computer
Playing Movies
To play back a movie, first copy it to your computer and then double-click the movie
file. Some operating systems may not be able to play back movies. If this happens,
you need to install separately available software.
• If you are unable to play back movies, go to the URL below to download
QuickTime 7 and install it on your computer.
http://www.apple.com/quicktime/
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back
movies recorded with this camera on a computer.
Operating System : Windows 8.1, Windows 8, Windows 7, Windows Vista
CPU
: Image Quality “Full HD”, “HD”:
Core 2 Duo 3.0GHz or higher
Image Quality “HS240”:
Pentium 4 2.0GHz or higher
Required Software: QuickTime 7
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
. Movie Playback Precautions
• Be sure to move the movie data to the hard disk of your computer before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
• Proper movie playback may not be possible on some computers. If you experience
problems, try the following.
– Quit any other applications you have running, and stop resident applications.
94
Using the Camera with a Computer
Using the Camera with a Macintosh
When you want to do
this:
Operating System
Version
Required Software:
See
page:
Save images to your
Macintosh and view
them there manually
OS X
Installation not required.
95
Save images to your
Macintosh
automatically/Manage
images
OS X
iPhoto, which comes
bundled with some
Macintosh products.
–
Play movies
OS X
QuickTime 7.7 or higher
97
Connecting the Camera to Your Computer and Saving Files
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
• The camera does not support operation with Mac OS X 10.0 to 10.4. Operation is
supported with Mac OS 10.5 to 10.9 (using the OS standard USB driver) only.
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially
available card reader to access image files directly from the camera’s memory
card. For details, see the user documentation that comes with your computer.
95
Using the Camera with a Computer
. To connect the camera to your computer and save files
1.
Turn off the camera and then
use the micro USB cable that
comes with the camera to
connect it to your Macintosh.
[USB] port
USB
• For details about connecting to
the camera and precautions
when connecting, see page 22.
Micro USB cable
(included with camera)
2.
Press [p] (Power) to turn on the camera.
• When you turn on the camera, check to make sure that the color of its back
lamp changes from red to green or amber (page 23). In this mode, your
Macintosh recognizes the memory card loaded in the camera (or the camera’s
built-in memory if it does not have a memory card loaded) as a drive. The
appearance of the drive icon depends on the Mac OS version you are using.
• The first time you connect the camera to your Macintosh with the USB cable,
an error message may appear on your computer. If this happens, disconnect
and then reconnect the USB cable.
3.
Double-click the camera’s drive icon.
The camera’s back lamp will light green at this time. In this mode, your Macintosh
recognizes the memory card loaded in the camera (or the camera’s built-in
memory if it does not have a memory card loaded) as a drive. The appearance of
the drive icon depends on the Mac OS version you are using.
4.
Drag the “DCIM” folder to the folder to which you want to copy it.
5.
After the copy operation is complete, drag the drive icon to Trash.
6.
Disconnect the camera from the computer.
On the camera, press [p] (Power) to turn off the camera. After checking to make
sure that the back lamp is unlit or lit red, disconnect the USB cable.
96
Using the Camera with a Computer
. To view copied images
1.
Double-click the camera’s drive icon.
2.
Double-click the “DCIM” folder to open it.
3.
Double-click the folder that contains the images you want to view.
4.
Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 99.
• An image that was rotated on the camera will be displayed on your Macintosh
screen in its original (unrotated) orientation.
Playing a Movie
You can use QuickTime, which comes bundled with your operating system, to play
back movies on a Macintosh. To play back a movie, first copy it to your Macintosh
and then double-click the movie file.
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back
movies recorded with this camera on a computer.
Operating System : Mac OS X 10.5 or higher
Required Software: QuickTime 7.7 or higher
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
. Movie Playback Precautions
Proper movie playback may not be possible on some Macintosh models. If you
experience problems, try the following.
– Upgrade to the latest version of QuickTime.
– Shut down other applications that are running.
IMPORTANT!
• Be sure to move the movie data to the hard disk of your Macintosh before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
97
Using the Camera with a Computer
Files and Folders
The camera creates a file each time you shoot a snapshot, record a movie, or
perform any other operation that stores data. Files are grouped by storing them in
folders. Each file and folder has its own unique name.
• For details about how folders are organized in memory, see “Memory Folder
Structure” (page 99).
Name and Maximum Number Allowed
Example
Each folder can contain up to 9999 files named
CIMG0001 through CIMG9999. The extension
on the file name depends on the file type.
26th file name:
File
CIM G 0026.JPG
Extension
Serial number (4 digits)
Folders
Folders are named from 100CASIO to
999CASIO.
There can be up to 900 folders in memory.
100th folder name:
100CASIO
Serial number (3 digits)
• You can view folder and file names on your computer. For details about how file
names are displayed on the camera’s monitor screen, see page 10.
• The total number of folders and files allowed depends on the image size and
quality, and capacity of the memory card being used for storage.
98
Using the Camera with a Computer
Memory Card Data
The camera stores images you shoot in accordance with the Design Rule for Camera
File System (DCF).
. About DCF
The following operations are supported for DCF-compliant images. Note, however,
that CASIO makes no performance guarantees concerning these operations.
• Transferring this camera’s DCF-compliant images to another manufacturer’s
camera and view them.
• Printing this camera’s DCF-compliant images on another manufacturer’s printer.
• Transferring another camera’s DCF-compliant images to this camera and view
them.
. Memory Folder Structure
100CASIO
CIMG0001.JPG
CIMG0002.MOV
DCIM Folder
Recording Folder
Image File
Movie File
101CASIO
102CASIO
Recording Folder
Recording Folder
DCIM
. Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When
displaying an image recorded on another camera, it may take a long time for the
image to appear on this camera’s monitor screen.
. Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM
folder and all of its contents. A good way to keep track of multiple DCIM folders it to
change their names to dates or something similar after you copy them to your
computer. If you later decided to return a DCIM folder to the camera, however, be
sure to change its name back to DCIM. The camera is designed to recognize only a
root file with the name DCIM. Note the camera also will not be able to recognize the
folders inside the DCIM folder unless they have the names they originally had
when you copied them from the camera to your computer.
• Folders and files must be stored in accordance with the “Memory Folder Structure”
shown on page 99 in order for the camera to be able to recognize them correctly.
99
Using the Camera with a Computer
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
For information about menu operations, see page 55.
Adjusting Monitor Screen Brightness (Screen)
Procedure
MENU * Setup * Screen
You can use the following procedure to change the brightness of the monitor screen.
Auto
With this setting, the camera detects available light levels and
automatically adjusts the brightness of the monitor screen accordingly.
+2
Brightness that is greater than +1, which makes the screen easier to view.
This setting consumes more power.
+1
Bright setting for outdoor use, etc. Brightness that is greater than 0.
0
Normal monitor screen brightness for indoor use, etc.
–1
Screen brightness for viewing in a dark environment without disturbing
others around you.
Selecting Display Information (Info)
Procedure
MENU * Setup * Info
Selecting “ON” displays setup status and other information.
NOTE
• When “Info” is enabled (On) in the PLAY mode, the exposure, shutter speed, and
ISO sensitivity setting values of the currently displayed image are displayed in red
when the current image’s Auto Exposure (AE) is not correct.
100
Other Settings (Set Up)
Locking the Screen (Screen Lock)
Procedure
MENU * Setup * Screen Lock
Normally, the arrangement of icons and the images displayed on the camera monitor
screen change automatically in accordance with the camera’s orientation. Selecting
“On” for the “Screen Lock” setting will lock the screen so its contents do not readjust
to match the camera orientation.
Resizing Snapshots before Sending Them to a Smartphone
(Resize before send)
Procedure
MENU * Setup * Resize before send
See page 87 for details.
Configuring Camera Sound Settings (Sounds)
Procedure
MENU * Setup * Sounds
Startup
Half Shutter
Shutter
Toggles the operation tone between on and off.
Operation
Volume
Operation
Vol
Specifies the sound volume. This volume setting is also
used during video output (from the HDMI port) (page 68).
Playback
Vol
Specifies the volume of movie audio output. This volume
setting is also used during video output (from the HDMI
port) (page 68).
Specifies the volume of Posing Shot voice guidance.
Voice guidance is output in accordance with this setting
Posing Vol
even if “Off” is selected for the “Shutter” operation tone
setting.
• Setting a volume level of 0 mutes output.
101
Other Settings (Set Up)
Time Stamping Snapshots (Timestamp)
Procedure
MENU * Setup * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: July 10, 2016, 1:25 p.m.
Date
2016/7/10
Date & Time
2016/7/10 1:25pm
Off
No stamping of date and/or time
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using some printing application.
• Stamping is performed in accordance with the date and time settings (page 104)
and the display style settings (page 104).
102
Other Settings (Set Up)
Configuring World Time Settings (World Time)
Procedure
MENU * Setup * World Time
Setting a Travel Destination
You can use the World Time screen to view the current time in a zone that is different
from your Home City when you go on a trip, etc. World Time displays the current time
in 162 cities in 32 time zones around the globe.
1.
Touch “Destination”.
• To change the geographic area and city for the time where you normally use
the camera, select “Home”.
2.
Touch “City”.
• To specify summer time for the destination city, select “DST” and then select
the “On” setting (Summer time is used in some geographical areas to advance
the current time setting by one hour during the summer months).
3.
Drag upwards and downwards to display the area of the destination
city and then touch the area.
4.
Drag upwards and downwards until you find the city you want, and
then touch to select it.
IMPORTANT!
• Before configuring World Time settings, make sure that the Home City setting is
the place where you live or normally use the camera. If it isn’t, select “Home” on the
screen in step 1 and configure the Home City, date, and time settings as required
(page 104).
Selecting the Time Display
Use this procedure to specify the time displayed by the camera for your home city
and destination.
1.
Touch “Time”.
2.
Touch “Home” or “Destination”.
This will configure the time setting of the location you touched in the previous
step.
103
Other Settings (Set Up)
Setting the Camera’s Clock (Adjust)
Procedure
MENU * Setup * Adjust
1.
Touch the value you want to change (year, month,
day, hour, minute).
2.
Touch “ ” or “
selected value.
” to change the currently
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City (page 103) before
setting the time and date. If you set the time and date
while the wrong city is selected for your Home City, the
times and dates of all of the World Time cities (page
103) will be wrong.
• To switch between 12-hour and 24-hour format, touch
the 12/24 hour switch icon.
• Touching and holding “ ” or “ ” scrolls at high speed.
3.
12/24 hour
switch icon
Touch “OK”.
Specifying the Date Style (Date Style)
Procedure
MENU * Setup * Date Style
You can select from among three different styles for the date.
Example: July 10, 2016
YY/MM/DD
16/7/10
DD/MM/YY
10/7/16
MM/DD/YY
7/10/16
104
Other Settings (Set Up)
Specifying the Display Language (Language)
Procedure
MENU * Setup * Language
. Specify the display language you want.
1.
On the menu screen, touch “Setup”.
2.
Touch “Language”.
3.
Drag upwards and downwards until you find the
language you want, and then touch to select it.
• Camera models sold in certain geographic areas may not
support display language selection.
Selecting the HDMI Terminal Output Method (HDMI)
Procedure
MENU * Setup * HDMI
Use this setting to select the digital signal format when connecting to a TV with an
HDMI cable.
Auto
This setting will cause the format to change automatically in accordance
with the connected TV. Normally, you should use this mode.
1080i
1080i format output*
480p
480p format output
576p
576p format output
* 1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required
output method may be 576p when outputting to a digital TV in a PAL reception area
that does not support 1080i 60i. If you are in a PAL reception area and nothing is
displayed automatically, change the setting to 576p.
• If an image does not appear when “Auto” is selected as the output method, try
changing this setting to something else.
105
Other Settings (Set Up)
Changing the Camera Password for Wireless LAN Connection
(WLAN password)
Procedure
MENU * Setup * WLAN password
Use procedure to change the password you used when establishing a wireless LAN
connection between the camera and a smartphone.
1.
Touch the password digit you want to change.
2.
Touch “
3.
When the password is the way you want, touch “OK”.
” and “
” to change the currently selected digit.
NOTE
• Note that after changing the wireless LAN password on the camera, you will also
need to change the Wi-Fi settings of the smartphone.
– iPhone:
Tap the right arrow of the field where the SSID of the camera is displayed in the
Wi-Fi settings to delete network settings. After deleting, select the camera SSID
again and input the new password.
– Android terminal:
Touch the field where the SSID of the camera is displayed in the Wi-Fi settings
and select Forget. Select the camera SSID again and input the new password.
Displaying a Startup Screen at Power On (Startup)
Procedure
MENU * Setup * Startup
Selecting “On” for Startup causes a built-in startup screen to appear on the monitor
screen whenever the camera is turned on.
106
Other Settings (Set Up)
Formatting Built-in Memory or a Memory Card (Format)
Procedure
MENU * Setup * Format
If a memory card is loaded in the camera, this operation will format the memory card.
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
• Formatting built-in memory or a memory card will delete all protected images
stored there.
• Check the battery level before starting a format operation and make sure it is not
too low. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
Resetting the Camera to Factory Defaults (Reset)
Procedure
MENU * Setup * Reset
See page 123 for details about the camera’s factory default settings.
The settings below are not reset.
World Time settings, clock settings, date style, screen language, WLAN password
107
Other Settings (Set Up)
Appendix
Safety Precautions
*DANGER
This symbol indicates information that, if ignored or applied incorrectly, creates the
danger of death or serious personal injury.
*WARNING
This indication stipulates matters that have the risk of causing death or serious injury
if the product is operated incorrectly while ignoring this indication.
*CAUTION
This indication stipulates matters that have the risk of causing injury as well as
matters for which there is the likelihood of occurrence of physical damage only if the
product is operated incorrectly while ignoring this indication.
Symbol Examples
!
This circle with a line through it (-) means that the indicated action must not
be performed. Indications within or nearby this symbol are specifically
prohibited. (The example at left indicates that disassembly is prohibited.)
$
The black dot (0) means that the indicated action must be performed.
Indications within this symbol are actions that are specifically instructed to be
performed. (The example at left indicates that the power plug must be
unplugged from the electrical socket.)
*DANGER
. Rechargeable Battery
• To charge the battery, use only the method specifically described in this
manual. Attempting to charge the battery by an unauthorized means
creates the risk of battery overheating, fire, and explosion.
• Do not expose or immerse the battery in fresh water or salt water. Doing
so can damage the battery, and cause deterioration of its performance
and loss of service life.
• The battery is intended for use with a CASIO Digital Camera only. Use
with any other device creates the risk of the battery damage, or
deterioration of battery performance and service life.
108
+
%
+
Appendix
*DANGER
• Failure to observe any of the following precautions creates the risk of battery
overheating, fire, and explosion.
– Never use or leave the battery near open flame.
– Do not expose the battery to heat or fire.
– Make sure the battery is oriented correctly when charging it.
– Never carry or store the battery together with items that can conduct electricity
(necklaces, pencil lead, etc.).
– Never disassemble the battery, pierce it with a needle, or expose it to strong
impact (hit it with a hammer, step on it, etc.), and never apply solder to it.
Never place the battery into a microwave oven, dehumidifier, high-pressure
generating device, etc.
– Never remove the outer sticker from the battery.
• Should you ever notice leakage, strange odor, heat generation,
discoloration, deformation, or any other abnormal condition while using,
charging, or storing a battery, immediately remove it from the camera
and keep it away from open flame. Also, do not use the affected battery after the
abnormal symptoms disappear.
• Do not use or leave the battery under direct sunlight, in an automobile
parked in the sun, or in any other area subject to high temperatures.
Doing so can damage the battery, and cause deterioration of its
performance and loss of service life. Also, these conditions can cause the
battery to swell to the point that you may not be able to remove it.
• Battery fluid can damage your eyes. Should battery fluid get into your
eyes accidentally, immediately rinse them with clean tap water and then
consult a physician.
-
+
+
109
Appendix
*WARNING
. Smoke, abnormal odor, overheating, and other abnormalities
$
• Continued use of the camera while it is emitting smoke or strange odor,
or while it is overheating creates the risk of fire and electric shock.
Immediately perform the following steps whenever any of the above
symptoms are present.
1. Turn off the camera.
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the power outlet. Also, remove the battery from the camera, taking
care to protect yourself against burn injury.
3. Contact your retailer or nearest CASIO authorized service center.
. Keep Away From Fire
• Never expose the camera to fire, which can cause it to explode and
creates the risk of fire and personal injury.
. Avoid Use While In Motion
• Never use the camera to record or play back images while operating an
automobile or other vehicle, or while walking. Looking at the monitor
while in motion creates the risk of serious accident.
. LED Light
• Never use the LED light while it is pointed in the direction of a person
operating a motor vehicle. Doing so can interfere with the driver’s vision
and create the risk of accident.
-
. USB-AC Adapter
• Misuse of USB-AC adapter creates the risk of fire and electric shock. Be sure to
observe the following precautions.
– Use only the specified USB-AC adapter.
– Never use the USB-AC adapter with another device.
– Use a power outlet that matches the power supply specified for the
USB-AC adapter.
– Never plug the USB-AC adapter or power cord into a wall outlet that is shared
by other devices, or into a shared extension cord.
– Never locate the USB-AC adapter near a stove or other heating device.
• Misuse of the USB-AC adapter can cause them to become damaged, creating
the risk of fire and electric shock. Be sure to observe the following precautions.
– Never place heavy objects on the USB-AC adapter or subject it to
direct heat.
– Do not modify the USB-AC adapter, allow it to become damaged, or
forcibly bend it.
– Do not twist or pull on the power cord.
– When in use, locate the cord where it will not be tripped over.
-
-
110
Appendix
*WARNING
• Never touch the power plug while your hands are wet. Doing so creates
the risk of electric shock.
• Should the power cord or power plug become damage, contact your
retailer or nearest CASIO authorized service center.
• Do not use the USB-AC adapter in areas where liquids* might spill on
them. Liquids create the risk of fire and electric shock.
* Liquids: Water, sports drinks, seawater, animal or pet urine, etc.
• Do not place a flower vase or any other liquid container on top of the
USB-AC adapter. Water creates the risk of fire and electric shock.
• Do not touch the camera or USB-AC adapter during lightning storms.
If a power cord was included with your camera
"
+
%
1
+
• The power cord that comes with the camera is designed for use in the
country where the camera was purchased. If you use the camera in
another country, be sure to use a power cord that conforms to that
country’s ratings and power supply voltage. Use of an improper power cord
creates the risk of fire and electric shock.
• Before going out, be sure to unplug the USB-AC adapter from the power
outlet and put in a place away from objects used by animals and pets.
An animal or pet chewing on the power cord can cause it short, leading
to the risk of fire.
+
. Water and Foreign Matter
%
• Water, other liquids, or foreign matter (especially metal) getting inside
the camera creates the risk of fire and electric shock. Immediately
perform the following steps whenever any of the above symptoms are
present. Particular care is required when using the camera where it is raining or
snowing, near the ocean or other body of water, or in a bathroom.
1. Turn off the camera.
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the power outlet. Also, remove the battery from the camera, taking
care to protect yourself against burn injury.
3. Contact your retailer or nearest CASIO authorized service center.
. Disassembly and Modification
• Never try to take it apart or modify it in any way. Doing so creates the
risk of electric shock, burn injury, and other personal injury. Be sure to
leave all internal inspection, maintenance, and repair up to your retailer
or nearest CASIO authorized service center.
111
!
Appendix
*WARNING
. Dropping and Rough Treatment
-
• Continued use of the camera after it is damaged by dropping or other
rough treatment creates the risk of fire and electric shock. Immediately
perform the following steps whenever any of the above symptoms are
present.
1. Turn off the camera.
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the power outlet. Also, remove the battery from the camera, taking
care to protect yourself against burn injury.
3. Contact your retailer or nearest CASIO authorized service center.
. Memory Cards
• Memory cards are small and present a risk of accidentally being
swallowed by infants and young children. Keep memory cards out of the
reach of infants and young children. If a memory card is ever swallowed
accidentally, contact a physician immediately.
. Precaution when Camera is On
• Do not touch the camera for long periods while it is on. The camera
becomes warm when on, and long term contact creates the risk of lowtemperature burns.
. Interference with other digital devices
+
+
-
• Should you notice radio interference or other problems on other devices
is being caused while using this camera, stop using the wireless
functions (Remote Capture, image transfer, wireless image viewing,
etc.) of this camera, or turn off the camera. Use of wireless functions creates the
risk of radio interference and abnormal operation of other devices.
• When in a medical facility or aircraft, comply with instructions of
personnel in charge. Electromagnetic waves and other signals emitted
by the camera’s wireless function create the risk of accident.
• Do not use the camera’s wireless function while in the vicinity of high
precision digital devices or digital devices that use weak signals. Doing
so can interfere with proper operation of such digital devices and create
the risk of accident.
• When using the camera’s wireless function, keep it away from any
person wearing a pacemaker. Magnetism emitted by the camera may
affect cardiac pacemakers and other medical devices. Should you ever
notice any abnormality, immediately move away from the product and contact a
physician.
• On a crowded train or any other crowded location where there is the
possibility of being in the vicinity of a person wearing a cardiac
pacemaker, stop using the wireless functions (Remote Capture, image
transfer, wireless image viewing, etc.) of this camera, or turn off the camera.
Radio waves emitted by the camera’s wireless function may affect pacemaker
operation.
+
+
+
112
Appendix
*CAUTION
. USB-AC Adapter
• Misuse of the USB-AC adapter creates the risk of fire and electric shock. Make
sure you observe the following precautions.
– Never cover the USB-AC adapter or power cord with a quilt, blanket,
or other cover while it is in use, and do not use it near a heater. Doing
so can interfere with heat radiation and cause the area around them
to become hot.
– Do not use detergent when cleaning the power cord, the USB-AC adapter, or
the USB cable (especially the plugs and jacks).
– Insert the power plug into the wall outlet as far as it will go.
– Unplug the power plug from the wall outlet before leaving the camera
unattended for long periods, such as when leaving on a trip, etc.
– At least once a year, use a cloth or vacuum cleaner to clean any dust build up
on the prongs of the power plug and in the area around them.
– (Power cord included with your camera) When unplugging from the wall outlet,
never pull on the power cord. Grasp the power plug and pull.
+
. Rechargeable Battery
• If battery charging does not end normally within the specified charging
time, stop charging anyway and contact your local CASIO authorized
service center. Continued charging creates the risk of battery
overheating, fire, and explosion.
• Be sure to read the user documentation that comes with the camera
before using or charging the battery.
• Store batteries in a location that cannot be reached by infants and young
children. When using a battery where infants and young children are
present, be on guard to ensure that they do not have the chance to
remove the battery from the camera.
• Do not leave batteries near areas used by pets. A pet chewing on a
battery can lead to accidents caused by the battery leaking, overheating,
or exploding.
• Should fluid from a battery accidentally get onto clothing or your skin,
immediately rinse it off with clean tap water. Prolonged contact with
battery fluid can cause skin irritation.
. Connections
• Never plug any devices that are not specified for use with this camera
into connectors. Connecting a non-specified device creates the risk of
fire and electric shock.
. Unstable Locations
• Never place the camera on an unstable surface, on a high shelf, etc.
Doing so can cause the camera to fall, creating the risk of personal
injury.
113
+
+
+
+
-
Appendix
*CAUTION
. Locations To Be Avoided
• Never leave the camera in any of the following types of locations. Doing so
creates the risk of fire and electric shock.
– Areas subject to large amounts of humidity or dust
– Food preparation areas or other locations where oil smoke is present
– Near heaters, on a heated carpet, in areas exposed to direct sunlight,
in a closed vehicle parked in the sun, or other areas subject to very high
temperatures
-
. Monitor Screen
• Do not apply strong pressure to the LCD panel surface or subject it to
strong impact. Doing so can cause the display panel glass to crack and
lead to personal injury.
• Should the monitor screen ever become cracked, never touch any of the
liquid inside the monitor screen. Doing so creates the risk of skin
inflammation.
• Should monitor screen liquid ever get into your mouth, immediately rinse
your mouth out and contact your physician.
• Should monitor screen liquid ever get into your eyes or onto your skin,
immediately rinse with clean water for at least 15 minutes and contact
your physician.
. Backing Up Important Data
• Always keep backup copies of important data in camera memory by
transferring it to a computer or other storage device. Note that data can
be deleted in the case of camera malfunction, repair, etc.
. Memory Protection
• Whenever replacing the battery, be sure to follow the correct procedure
as described in the documentation that comes with the camera.
Incorrectly replacing the battery can result in corruption or loss of data in
camera memory.
. LED Light
• Do not fire the LED light or use other light emitting functions while the
light is pointed in the direction of and too close to a person’s face. Doing
so creates the risk of momentary loss of eyesight.
114
1
+
+
+
+
-
Appendix
Precautions During Use
. Data Error Precautions
Your digital camera is manufactured using precision digital components. Any of the
following creates the risk of corruption of data in camera memory.
– Removing the battery or memory card while the camera is performing some
operation
– Removing the battery or memory card while the back lamp is flashing green after
turning off the camera
– Disconnecting the USB cable while communication is in progress
– Shooting with a battery that quickly goes low right after it is charged
• Shooting with a battery that quickly goes low right after it is charged can also
cause camera malfunction. Replace the battery with a new one immediately.
– Other abnormal operations
Any of the above conditions can cause an error message to appear on the monitor
screen (page 129). Perform the action indicated by the message that appears.
. Operating Environment
• Operating Temperature Requirements: 0 to 40°C (32 to 104°F)
• Operating Humidity: 10 to 85% (non condensation)
• Do not place the camera in any of the following locations.
– In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand
– Near heating or cooling devices, or in other areas subjected to extreme changes
in temperature or humidity
– Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration
. Condensation
Sudden and extreme temperature changes, such as when the camera is moved from
the outdoors on a cold winter day into a warm room, can cause water droplets called
“condensation” to form on the interior and the exterior of the camera, which creates
the risk of malfunction. To prevent condensation from forming seal the camera in a
plastic bag before changing locations. Then leave the bag sealed to allow the air
inside to naturally change to the same temperature as the air in the new location.
After that, remove the camera from the bag and open the battery cover for a few
hours.
115
Appendix
. Lens
• Never apply too much force when cleaning the surface of the lens. Doing so can
scratch the lens surface and cause malfunction.
• You may sometimes notice some distortion in certain types of images, such as a
slight bend in lines that should be straight. This is due to the characteristics of
lenses, and does not indicate malfunction of the camera.
. Caring for your camera
• Never touch the lens with your fingers. Finger smudges, dirt, and other foreign
matter on the lens can interfere with proper operation of the camera. Use a blower
or other means to keep the lens and flash window free of dirt and dust, and wipe
gently with a soft, dry cloth.
• To clean the camera, wipe it with a soft, dry cloth.
. Old Rechargeable Battery Handling Precautions
• Insulate the positive and negative terminals with tape, etc.
• Do not peel the covering off of the battery.
• Do not try to take the battery apart.
. Discarding or Transferring Ownership of a Memory Card or the
Camera
The format and delete functions of the camera do not actually delete files from the
memory card. The original data remains on the card. Note that responsibility for the
data on a memory card lies with you. The following procedures are recommended
whenever you discard a memory card or the camera, or if you transfer ownership to
another party.
• When discarding a memory card, either physically destroy the memory card or use
commercially available data delete software to completely delete the data on the
memory card.
• When transferring ownership of a memory card to another party, use commercially
available data deletion software to completely delete the data on it.
• Use the format function (page 107) to completely delete the data in built-in memory
before discarding or transferring ownership of the camera.
116
Appendix
. Precautions when using the wireless LAN function
This product uses wireless data communication which can cause interference with or
be subject to interference by other nearby devices.
Radio transmission interception
Note that the radio waves that are used to send and receive data can be intercepted
by third parties.
Unauthorized access
CASIO COMPUTER CO., LTD. shall be held in no way liable for any unauthorized
access and/or use of the access point equipped on this product if the product is ever
lost or stolen.
Use as a wireless LAN device
Use the wireless LAN function of this product only as specifically described in this
manual. Any other use is unintended use, and CASIO COMPUTER CO., LTD. shall
be held in no way liable for any damages arising out of unintended use.
Magnetism, electrostatic charge, and radio interference
Do not use this product near a microwave oven or any other area where magnetism,
electrostatic charge, or radio interference is generated. Radio wave reception may be
poor in certain environments.
Also note that other devices using the same 2.4GHz band used by this product may
cause reduced processing speeds in both devices.
Connecting to a public LAN
This product does not support wireless LAN connection over a public wireless LAN
environment.
Intended Areas of Use
This camera’s wireless LAN function is intended for use in China only. CASIO
COMPUTER CO., LTD. shall be held in no way responsible if the wireless LAN
function is used outside of China in violation of the radio laws and/or regulations that
apply in the country or geographic area where it is used.
. Other Precautions
The camera becomes slightly warm during use. This is normal and does not indicate
malfunction.
117
Appendix
. Copyrights
Except for your own personal enjoyment, unauthorized use of snapshots or movies of
images whose rights belong to others, without the permission of the right holder, is
forbidden by copyright laws. In some cases, shooting of public performances, shows,
exhibitions, etc. may be restricted entirely, even if it is for your own personal
enjoyment. Regardless of whether such files are purchased by you or obtained for
free, posting them on a website, a file sharing site, or any other Internet site, or
otherwise distributing them to third parties without the permission of the copyright
holder is strictly prohibited by copyright laws and international treaties. For example,
uploading or distributing on the Internet images of TV programs, live concerts, music
videos, etc. that were photographed or recorded by you may infringe upon the rights
of others. Note that CASIO COMPUTER CO., LTD. shall not be held liable for use of
this product in any way that infringes on the copyrights of others or that violates
copyright laws.
The following terms, which are used in this manual, are registered trademarks or
trademarks of their respective owners.
Note that trademark ™ and registered trademark ® are not used within the text of this
manual.
• microSDXC Logo is a trademark of SD-3C, LLC.
• Microsoft, Windows, Windows Vista, Windows 7, Windows 8, and Windows 8.1 are
registered trademarks or trademarks of Microsoft Corporation in the United States
and other countries.
• Macintosh, Mac OS, QuickTime, iPhoto, and iPhone are trademarks of Apple Inc.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing, LLC.
• Android is a registered trademark of Google Inc.
• iOS is a trademark or registered trademark of Cisco Systems, Inc. of the United
States.
• Wi-Fi is a registered trademark of the Wi-Fi Alliance.
• EXILIM and EXILIM Remote are registered trademarks or trademarks of CASIO
COMPUTER CO., LTD.
• All other company or product names mentioned herein are registered trademarks
or trademarks of their respective companies.
Any and all unauthorized copying, distribution, and transfer for commercial purposes
of the software provided by CASIO for this product are prohibited.
118
Appendix
OpenVG 1.1 Reference Implementation
Copyright (c) 2007 The Khronos Group Inc.
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and /or associated documentation files
(the "Materials "), to deal in the Materials without restriction,
including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Materials,
and to permit persons to whom the Materials are furnished to do so,
subject to the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Materials.
THE MATERIALS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE MATERIALS OR
THE USE OR OTHER DEALINGS IN THE MATERIALS.
119
Appendix
Power Supply
Charging
. If the camera’s back lamp starts flashing red...
If the back lamp starts flashing red during charging, it means that further charging is
not possible for one of the reasons below. Perform the actions described below to
correct the problem and then try charging again.
Ambient temperature or the temperature of the battery is abnormally high
or low
Unplug the USB cable from the camera and wait for a while until the camera is within
the temperature range of 15°C to 35°C (59°F to 95°F), and then try charging again.
Safety timer activated
A battery that has not been used for a long time, certain types of computers, and
connection conditions can cause charging to take longer than normal. If charging
takes longer than about five hours, a safety timer will terminate it automatically, even
if the battery is not fully charged. If the battery has not been used for a very long time,
charging may terminate automatically after only about 60 minutes.
1) Using a battery that has not been used for a long time.
Disconnect and then reconnect the USB cable to resume charging.
2) Insufficient power supply when connected to computer
The camera can be charged only via a USB 2.0 standard USB port. Connect
directly to a USB port what supplies a current of 500mA.
For details about the power supply capacity of a computer’s USB port, contact the
manufacturer of the computer. Though disconnecting and then reconnecting the USB
cable will resume charging, you may need to do so repeatedly if the power supply
capacity of the computer is low.
If problems persist after you perform the above steps or if the battery fails to
charge after 5 hours, it could mean that the battery is faulty. Contact your nearest
CASIO authorized service center.
120
Appendix
Battery Precautions
. Precautions during Use
• Operation provided by a battery under cold conditions is always less than operation
under normal temperatures. This is due to the characteristics of the battery, not the
camera.
• Charge the battery in an area where the temperature is within the range of 15°C to
35°C (59°F to 95°F). Outside this temperature range charging can take longer than
normal or even fail.
• Do not tear or remove the battery outer label.
• If a battery provides only very limited operation following a full charge, it probably
means the battery has reached the end of its service life. Replace the battery with a
new one.
. Storage Precautions
• Storing the battery for a long time while it is charged can cause deterioration of
battery characteristics. If you do not plan to use a battery for some time, fully use
up its charge before storing it.
• Always remove the battery from the camera when you are not using it. A battery left
in the camera can discharge and go dead, which will require some time to charge
when you need to use the camera.
• Store batteries in a cool, dry place (20°C (68°F) or lower).
• To prevent over discharging of an unused battery, fully charge it, and then load it in
the camera and fully use up the charge about once every six months.
Using the Camera in another Country
. Precautions during Use
• The bundled USB-AC adaptor is designed for operation with any power supply in
the range of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the
power plug depends on each country or geographic area. Before taking the camera
and USB-AC adaptor along on a trip, check with travel agent about the power
supply requirements in your destination(s).
• Do not connect the USB-AC adaptor to a power supply through a voltage converter
or similar device. Doing so can lead to malfunction.
. Extra Batteries
• Taking along extra fully charged batteries (NP-150) is recommended while on a trip
in order to avoid not being able to shoot images due to the battery going dead.
121
Appendix
Using a Memory Card
See page 26 for information about supported memory cards and how to load a
memory card.
. Using a Memory Card
• If a memory card starts to behave abnormally during image playback, you can
restore normal operation by reformatting it (page 107). However, it is
recommended that you always take along multiple memory cards whenever using
the camera far away from the home or office.
• As you record data to and delete data from a memory card a number of times, it
loses its ability to retain data. Because of this, periodic re-formatting of a memory
card is recommended.
• Electrostatic charge, electrical noise, and other phenomena can cause data to
become corrupted or even lost. Make sure that you always back up important data
on other media (CD-R, CD-RW, hard disk, etc.).
. Memory Card Handling Precautions
Certain types of memory cards can slow down processing speed. Whenever possible
use an Ultra High-Speed Type memory card. Note, however, that not all operations
can be guaranteed even if an Ultra High-Speed Type memory card is used. Certain
movie quality settings can result in too much time being required to record data,
which can result in breaks in the image and/or audio during playback. If this happens,
the movie icon will turn yellow on the monitor screen.
122
Appendix
Reset Initial Default Settings
The tables in this section show the initial default settings on menus that appear in the
REC mode and PLAY mode when you reset the camera (page 107).
• A dash (–) indicates an item whose setting is not reset or an item for which there is
no reset setting.
IMPORTANT!
• Some menu items may not be available, depending on the recording mode being
use.
. REC Menu
Touch Shutter
Off
White Balance
Auto WB
Self-timer
Off
ISO
Auto
LED
Off
Focus
AF
Image Size
12M
Review
Type 2
Movie Quality
Full HD
Setup
* See below.
Brightness
0.0
* Default setting depends on country or geographic region.
. PLAY Menu
Promotion
Movie
–
Paint
–
Slideshow
–
Cut out subject –
Paste subject
Protect
–
Rotation
–
Resize
–
Trimming
–
Setup
* See below.
–
123
Appendix
. Setup Menu
Screen
Auto
World Time
–
Info
Off
Adjust
–
Screen Lock
Off
Date Style
–
Language
–
HDMI
Auto
WLAN
password
–
Startup
Off
Format
–
Reset
–
Version
–
Resize
before send
3M
Sounds
Startup: On /
Half Shutter: On /
Shutter: On /
Operation: On /
Operation Vol: 3 /
Playback Vol: 3 /
Posing Vol: 3
Timestamp
Off
124
Appendix
When things don’t go right...
Troubleshooting
Problem
Possible Cause and Recommended Action
Power Supply
Power does not turn
on.
1)The battery of new camera is not charged. Charge the
battery before using the camera.
2)The camera battery may be dead. Charge the battery (page
18). If the battery goes dead soon after being charged, it
means the battery has reached the end of its life and needs
to be replaced. Purchase a separately available CASIO
NP-150 rechargeable lithium ion battery.
The camera
suddenly powers
down.
1)The camera is designed to turn off automatically after no
operation is performed for about five minutes. Turn power
back on.
2)The battery may be dead. Charge the battery (page 18).
3)The camera’s protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
Power will not turn
off. Nothing
happens when a
button is pressed.
Remove the battery from the camera and then reload them.
Charging
The back lamp does
not light red and the
battery won’t
charge.
1)Unplug the USB cable from the camera and then plug it back
in again.
2)Remove the battery from the camera and then reload it
(page 19).
Image Recording
Image is not
recorded when the
shutter button is
pressed.
1)If the camera is in the PLAY mode, touch “ ” (REC) to enter
the REC mode.
2)If the message “Memory Full” appears, transfer images to
your computer, delete images you no longer need, or use a
different memory card.
Auto Focus does
not focus properly.
1)If the lens is dirty, clean it off.
2)The subject may not be in the center of the focus frame when
you compose the image.
3)You may be moving the camera when shooting. Place the
camera on a tabletop or some other stable surface, or find
some way to fix the camera in place.
4)You may be pressing the shutter button all the way without
waiting for Auto Focus. Half-press the shutter button and
allow enough time for Auto Focus to focus.
125
Appendix
Problem
Possible Cause and Recommended Action
The subject is out of
focus in the
recorded image.
The image may not be focused properly. When composing the
image, make sure the subject is located inside the focus frame.
The LED light does
not light.
1)If the battery is dead, charge it (page 18).
2)LED light operation is disabled automatically whenever you
are shooting with a BEST SHOT scene and HDR Art. Select
a different recording mode (page 38).
Camera powers
down during Selftimer countdown.
The battery may be dead. Charge the battery (page 18).
The monitor screen
image is out of
focus.
1)You may be using “Macro” for scenery or portraits. Use Auto
Focus for scenery and portrait shots (page 62).
2)You may be trying to use Auto Focus or “Infinity” when
shooting a close-up shot. Use the “Macro” for close ups
(page 62).
There is digital
noise in images.
1)Sensitivity may have been increased automatically for a dark
subject, which increases the chance of digital noise. Use a
light or some other means to illuminate the subject.
2)Shooting with a snapshot with a high ISO sensitivity setting
can increase digital noise in the image. If digital noise
becomes a problem, try changing the ISO sensitivity setting
to a lower value.
A recorded image
was not saved.
1)Camera power may have been turned off before the save
operation was complete, which will result in the image not
being saved. If the battery indicator shows
, charge the
battery as soon as possible (page 18).
2)You may have removed the memory card from the camera
before the save operation was complete, which will result in
the image not being saved. Do not remove the memory card
before the save operation is complete.
Though available
lighting is bright, the
faces of people in
the image are dark.
Not enough light is reaching the subjects. Adjust “Brightness”
to the + side (page 59).
Night shots come
out bad.
Use the “HS Night Scene” BEST SHOT scene (page 50) when
shooting at night.
Subjects are too
dark when shooting
images in a
seashore or ski
area.
Sunlight reflected by water, sand, or snow, can cause
underexposure of images. Adjust “Brightness” to the + side
(page 59).
126
Appendix
Problem
Possible Cause and Recommended Action
The image is out of
focus during movie
recording.
1)Focusing may not be possible because the subject is outside
the focus range. Shoot within the allowable range.
2)The lens may be dirty. Clean the lens (page 116).
3)During High Speed Movie recording, focus is fixed at the
position where it was when recording started. To focus an
image, half-press the shutter button for Auto Focus before
you touch “ ” (Movie) to start recording.
I can’t change the
settings of menu
items. Menu items
for some settings
are not displayed on
the menu.
Some menu items may not be available, depending on the
recording mode in use. While Premium Auto Pro is in use, only
the menu items whose settings can be configured will be
displayed on the menus.
Playback
The color of the
playback image is
different from what
appears on the
monitor screen
when shooting.
Sunlight or light from another source may be shining directly
into the lens when you are shooting. Position the camera so
sunlight does not shine directly into the lens.
Images are not
displayed.
This camera cannot display non-DCF images recorded onto a
memory card using another digital camera.
Images cannot be
rotated.
Note that you cannot edit the following types of snapshots.
• Snapshots recorded with another camera
• Extracted subjects
File Deletion
A file cannot be
deleted.
The file may be protected. Unprotect the file (page 76).
127
Appendix
Problem
Possible Cause and Recommended Action
Wireless LAN
I can’t establish a
wireless LAN
connection.
The wireless LAN
connection is
broken.
1)The camera cannot connect with a smartphone if they are
too far apart from each other.
2)The smartphone may be connected with another wireless
LAN. Check the smartphone’s Wi-Fi settings and confirm
that the camera is selected for wireless LAN connection
(page 82).
3)Connection may have been lost due to interference caused
by a nearby microwave oven, cordless phone, or other
wireless LAN device. Move the camera away from the device
causing the problem.
Other
The wrong date and
time are displayed,
or the wrong date
and time are being
stored along with
image data.
The date and time setting is off. Set the correct date and time
(page 104).
The messages on
The wrong display language is selected. Change the display
the display are in
language setting (page 105).
the wrong language.
Images cannot be
transferred over a
USB connection.
1)The USB cable may not be connected securely. Check all
connections.
2)If the camera is not turned on, turn it on.
3)Your computer may not be able to recognize the camera if
you connect via a USB hub. Always connect directly to the
computer’s USB port.
Language selection
screen appears
when the camera is
turned on.
1)You did not configure initial settings after purchasing the
camera or the camera may have been left with a dead
battery. Check the camera setup (pages 24, 104).
2)There may be a problem with the camera’s memory data. If
this is the case, perform the reset operation to initialize the
camera’s setup (page 107). After that, configure each
setting. If the language selection screen does not re-appear
when you turn the camera on, it means that the camera’s
memory management data has been restored.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
There are various
indicators and
values on the
monitor screen.
The monitor screen shows indicators and other information
about shooting conditions and the image you are recording.
You can disable display of indicators and values by selecting
“Off” for “Info” on the Setup menu.
128
Appendix
Problem
Possible Cause and Recommended Action
The time and date
settings configured
the first time after
purchasing the
camera are reset to
their factory defaults
when I remove the
camera’s battery.
Load the camera’s battery and reconfigure the time and date
settings (page 24). Do not remove the battery from the camera
for at least 24 hours after configuring time and date settings.
After that, the settings will not be reset if you remove the
battery.
• If the time and date are reset to their factory default settings
when you remove the battery after it has been loaded for
more than 24 hours, it could mean that the camera’s setting
memory is defective. Contact your retailer or a CASIO
authorized service center.
Buttons are not
responsive right
after the power has
been turned on.
With large capacity memory cards there is a delay after the
power has been turned on before the buttons become
responsive.
Display Messages
ALERT
The camera’s protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
Battery is low.
Battery power is low.
There is something wrong with the memory card. Turn off the
camera, remove the memory card and then reload it into the
camera. If this message re-appears when you turn the
camera back on, format the memory card (page 107).
Card ERROR
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a computer
or some other storage device.
Communication
stopped.
This message appears when the wireless LAN connection is
broken for some reason during data communication between
the camera and smartphone.
File could not be
saved because
battery is low.
Battery power is low, so an image file could not be saved.
Folder cannot be
created.
You are trying to record a file while there are already
9999 files stored in the 999th folder. If you want to record
more, delete files you no longer need (page 34).
LENS ERROR
This message appears and the camera turns off whenever
lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
129
Appendix
Memory Full
Memory is full with images you recorded and/or files saved
by editing operations. Delete files you no longer need (page
34).
Record Error
Image compression could not be performed for some reason
during image data storage. Shoot the image again.
SYSTEM ERROR
Your camera system is corrupted. Contact your retailer or a
CASIO authorized service center.
There are no files.
There are no files in built-in memory or on the memory card.
This card is not
formatted.
The memory card loaded in the camera is not formatted.
Format the memory card (page 107).
This function
cannot be used.
This message will appear part way through an operation
when you attempt to use a function that is not allowed in
combination with another function.
Number of Snapshots/Movie Recording Time
Snapshot
Image Size
(Pixels)
Approximate
File Size
Built-in Memory*1
Recording Capacity
microSD
Memory Card*2
Recording Capacity
12M (4000x3000)
4.13 MB
7
2286
3M (2048x1536)
1.25 MB
21
6533
130
Appendix
Movies
Built-in
Memory*1
Recording
Capacity
Maximum
Recording
Time with
microSD
Memory
Card*2
File Size
of
1-minute
Movie
Continuous
Recording
Time per
Movie*3
14.2 Megabits/
second
(30 frames/
second)
26 seconds
*4
2 hours
14 minutes
55 seconds
106.5 MB
29 minutes
HD
1280x720
(Monaural)
10.9 Megabits/
second
4 GB or
(30 frames/
29 minutes
second)
34 seconds
2 hours
56 minutes
25 seconds
81.8 MB
29 minutes
HS240
512x384
(No audio)
40.0 Megabits/
second
(240 frames/
second)
9 seconds
48 minutes
5 seconds
300.0 MB
12 minutes
58 seconds
Image Size /
Pixels
(Audio)
Approximate
Data Rate
(Frame Rate)
Full HD
1920x1080
(Monaural)
Maximum
File Size
*1 Built-in memory capacity after formatting (Approx. 49.9MB)
*2 When using a 16GB microSDHC memory card (SanDisk Corporation). Number of
image and recording time values depend on the memory card you are using.
*3 The allowable recording time will be shorter if the capacity of the microSD memory card
you are using is smaller than the maximum size of one file.
*4 The data transfer rate of built-in memory is not sufficient for Full HD movies. Whenever
possible use an Ultra High-Speed Type memory card.
• Snapshot and movie recording capacity values are approximate and intended for
reference only. Actual capacity depends on image contents.
• File size and data rate values are approximate and intended for reference only. Actual
values depend on the type of image being shot.
• When using a memory card with a different capacity, calculate the number of images as a
percentage of 16GB.
• The time it takes to play back a high speed movie will be different from the time it takes to
record it. If you record a high speed movie for 10 seconds, for example, it will take
80 seconds to play it back.
• Each movie can be up to 29 minutes long. Movie recording stops automatically after
29 minutes of recording.
131
Appendix
Specifications
File Format
Snapshots:
JPEG (Exif Version 2.3; DCF 2.0 standard)
Movies:
MOV format, H.264/AVC standard, IMA-ADPCM (monaural)
Recording Media
Built-in Memory (Image Storage Area: 49.9MB*)
microSD/microSDHC/microSDXC
* Built-in memory capacity after formatting
Recorded Image Sizes Snapshots:
12M (4000x3000), 3M (2048x1536)
Movies:
Full HD (1920x1080 30 fps), HD (1280x720 30 fps),
HS240 (512x384 240 fps)
Effective Pixels
11.1 Megapixels
Imaging Element
Size: 1/1.7-inch square pixel high-speed CMOS
Total Pixels: 12.76 Megapixels
Lens/Focal Distance
F2.8 f = 4.58 mm
(equivalent to 21 mm in 35 mm format)
Zoom
Up to 4.0X when SR zoom and Digital zoom are used in
combination
Up to 7.8X when SR Zoom, HD Zoom and Digital zoom are used
in combination (3M size)
Focusing
Contrast Detection Auto Focus
• Focus Modes:
Auto Focus, Macro Focus, Pan Focus, Infinity
• AF Area: Spot
* Intelligent AF area used when Premium Auto Pro is selected.
Approximate Focus
Range (Snapshot)
(From Lens Surface)
Auto Focus: 8 cm to 9 (3.1" to 9)
Macro Focus: 8 cm to 50 cm (3.1" to 19.7")
Infinity: 9
Pan Focus : 1 m to 9 (3.3' to 9)
Metering
Multi-pattern by imaging element
Exposure Control
Program AE
Exposure
Compensation
–2.0 EV to +2.0 EV (in 1/3EV steps)
Shutter
CMOS electronic shutter
Shutter Speed
Snapshot (Auto): 1/20 to 1/16000 second
Snapshot (Premium Auto Pro): 1 to 1/16000 second
Aperture Value
F2.8
132
Appendix
White Balance
Auto, Daylight, Overcast, Shade, Daywhite Fluorescent,
Daylight Fluorescent, Tungsten, Manual WB
Sensitivity
(Standard Output
Sensitivity)
Snapshots:
Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800,
ISO 1600, ISO 3200 equivalent
Movies: Auto
LED Light
Auto, On, Off
Wireless data transfer Standard: IEEE 802.11b/g/n
Operation frequency range: 1 to 11ch
Encryption: WPA2
Monitor Screen
3.0-inch TFT color LCD (Super Clear LCD)
921,600 dots
Capacitive type touch panel
External connection
terminal
Micro USB port (Hi-Speed USB compliance, USB charging),
HDMI output (Micro/TypeD)
Microphones
Monaural
Speaker
Monaural
Power Requirements
Rechargeable lithium ion battery (NP-150) x1
133
Appendix
Approximate Battery Life
All of the values provided below represent the approximate amount of time under
normal temperature (23°C (73°F)) before the camera turns off. These values are not
guaranteed. Low temperatures shorten battery life.
Number of snapshots (Operating Time)*1
Actual movie recording time (Full HD
movie)*1
240 shots
55 minutes
Approximate continuous movie recording time
(Full HD Movie)*2
1 hour 25 minutes
Approximate continuous movie recording time
(High speed movie)*2
1 hour 35 minutes
Continuous Playback (Snapshots)*3
3 hours 40 minutes
• Temperature: 23°C (73°F)
• Battery: NP-150 (Rated Capacity: 950 mAh)
• Recording Medium: 16GB microSDHC memory card (SanDisk Corporation UHS-I
series)
*1 In accordance with CIPA (Camera and Imaging Products Association) standards
*2 In accordance with CASIO standards
*3 One-image scroll approximately every 10 seconds
• The above values are based a new battery, starting from a full charge. Repeated
charging shortens battery life.
• The above values are for reference only. They do not guarantee that the specified
battery life will be attained under actual operating conditions.
• Frequency of Auto Focus and High Speed CS usage, configured settings, the
amount of time the camera is left turned on, and ambient temperature in the area
where the camera is used all greatly affect recording time and number of shots
values.
Power Consumption
3.7 V DC, Approximately 3.2 W
Dimensions
126 (W) x 64 (H) x 14.6 (D) mm
(4.96" (W) x 2.52" (H) x 0.57" (D))
(14.6 mm (0.57") thick excluding projections)
Weight
Approximately 167 g (5.9 oz)
(including battery and memory card*)
Approximately 146 g (5.1 oz)
(excluding battery and memory card)
* 16GB microSDHC memory card (SanDisk Corporation)
134
Appendix
. Rechargeable lithium ion battery (NP-150)
Rated Voltage
3.7 V
Rated Capacitance
950 mAh
Operating Temperature
Requirements
0 to 40°C (32 to 104°F)
Dimensions
34.2 (W) x 39.8 (H) x 6.9 (D) mm
(1.35" (W) x 1.57" (H) x 0.27" (D)) (excluding projections)
Weight
Approximately 20 g (0.7 oz)
. USB-AC adaptor (AD-C54UC)
Input Power
100 to 240 V AC, 50/60 Hz, 90 mA
Output Power
5.0 V DC, 650 mA
Operating Temperature
Requirements
5 to 35°C (41 to 95°F)
Dimensions
64.6 (W) x 38.4 (H) x 24 (D) mm
(2.5" (W) x 1.5" (H) x 0.9" (D)) (excluding projections)
Weight
Approximately 40 g (1.4 oz)
135
Appendix
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
M29
MA1408-A
2014
Download PDF

advertising